query
stringlengths 20
2.05k
| answer
stringlengths 75
2.05k
|
|---|---|
I've seen a few comments regarding handles that break. Does this happen often? I need a new mop but this issue worries me. | Our housekeeper uses the mop I purchased to clean several properties. She had another DynaMop that she had used for several years, until it was stolen. She has never had any problems with the DynaMop. She says it is the best mop she has ever used. |
I've seen a few comments regarding handles that break. Does this happen often? I need a new mop but this issue worries me. | I read that too before I purchased it and was a little leary, but I haven't any proablems. I have all hardwood floors and this mop spins out so dry that I can damp mop alot more often. I feel like the floors are much cleaner than just vacuuming. The mop heads rinse out so well I've not had to replace the first one. |
does it lock into place, or roll around when the kitty gets in.. My cat Huey would freak out if it moved while he was in it. | No it does not turn when the cat is in it and it turns real easy and easy to clean litter best item I bought and i'll grade it a+ |
does it lock into place, or roll around when the kitty gets in.. My cat Huey would freak out if it moved while he was in it. | The litter weighs the litter box in place. I have 4 cats and they have never turned it while they were in it. I really love it!! |
does it lock into place, or roll around when the kitty gets in.. My cat Huey would freak out if it moved while he was in it. | no, it doesn't move an inch, the litter keeps it still. it rolls, only when you roll it. Try the new Clump and Seal litter with it and you wont even notice you have a litter box. We know we got 3 cats. Thom |
wat size is 265/70/18 | If you are asking what the numbers mean, 265 is width in mm, 70 is ratio of width to sidewall heigth and 18" is inside diameter of tire. This would take a Z-583 cable set which is what the type that I use and are very easy to install |
can it sliced large slices for scalloped potatoes | The "disk" cutter blade can be set for slices or shredding. So, yes, you can slice potatoes for scalloped potatoes, but you would probably have to trim the potato to fit down the slot that feeds the slicer blade. A whole potato would not fit. |
Is there a portable stand available for 13.3" tablet? | I don't know I do not use it alone as much as I thought I would maybe that's why |
Does it have a MicroSD slot as shows on sideview picture (above Micro USB port) & whats it for? | I don't know what it is for either. However, speaker worked fine for months but is no longer working :( |
is this good for infant baby | I used mine at 2 months old with an 8 lbs infant. Your biggest concern will be that the lowest slots are at or below the shoulders. |
is this good for infant baby | Yes, call recaro to get a free infant insert. We used it with our 8 lb 23 in new born. She fit nicely, tho I would not want to use it with a smaller baby. |
is this good for infant baby | no, its will hurt the baby's neck. my son is about 7 months old when he used this, he pretty much love it. Good for infant who can control their head/neck, or at least have a strong neck to support their heavy head. |
is this good for infant baby | You could buy it for an infant. However, I didn't buy mine for my baby until she was 8 months. |
is this good for infant baby | We used it for our infants after a few months of using an infant car seat. I hated the infant seat loved using the recaro then wearing the baby at the store or wherever |
Does the phone have to be in the cradle to work? | Yes. Bluetooth or speaker is highly recommended because of power amplification. |
This item 1240-24 measures 7/8" x 3". What is the inside dimension? | Not sure what you are asking.. 7/8" is the width of the clip, and its 3" long/high. Snaps over a 2" double stitched leather belt just fine. I bought them for knife sheaths. they are very sturdy and work great. |
My Jack Russell is about 23lbs. Would a medium fit him? | I purchased this in a medium for a terrier mix who weighs 19lbs and it fit a little loose. |
My Jack Russell is about 23lbs. Would a medium fit him? | I don't think so as we have havanese and they weight about 12 pounds and they wear mediums |
My Jack Russell is about 23lbs. Would a medium fit him? | Awe pudgy Jack Jack's :) Mine is close to 30lbs (i know hes a porker). They are pretty stretchy and the medium still fits my Jack but i think it may because it has stretched out over time. A large would fit better and be more comfortable on your Jack. Hope this helps. |
My Jack Russell is about 23lbs. Would a medium fit him? | Most likely. My Yorkie/Poo is right at twenty and a little stout build. The medium fits him nicely with a bit of room. He loves this garment more than many we have. |
My Jack Russell is about 23lbs. Would a medium fit him? | You would need to measure him, but I bought a medium for a Hairless Chinese Crested and he weighs 17 pounds. He measures 14" long from neck to the base of his tail. Hope this helps you some.. |
My Jack Russell is about 23lbs. Would a medium fit him? | Hello. My yorkie weighs 13 pounds. The medium fits her but I have to roll up the les bc it's a little long. I would be safe and go with a large. Thanks :-) |
What are the contents? | Here is a list of active and inactive ingredients. http://www.pharmapacks.com/products.php?product=Cramp-911-Muscle-Relaxing-Roll%252dOn-Lotion-21-mL#And the product works great. |
What are the contents? | I don't have the box anymore. It says on the bottle, Cuprum Metallicum and Magnesia Sulfate. You can try their website also. I have been using it for years for legs cramps at night and it works fast and great. I even take it along on trips. |
What are the contents? | I believe that the contents are Homeopathic in nature. I have used it for years and found that it gets rid of cramps almost immediately. I found that if you apply it before you go to bed, it keeps the cramps away. Works great. |
What are the contents? | Cuprum metallicum 6X H.P.U.S. 0.05% and Magnesia Sulfate 6X H.P.U.S. 0.05%. |
What are the contents? | the box lists Active Ingredients both for muscle cramps: cuprum Metallicum 6X H.P.U.S. 0.05%and Magnesia sulfate 6X H.P.U. S. 0.05% (Homeopathic Pharmacopea of the United States)There is a website for it and a phone number on the web site |
Up to what size diam pot can i use on the medium sized burner? | The plates/burners work with pots that are about 50% of their size and larger. So if the pot has a diam larger than the burner, only the section on the induction plate gets heated by the burner. A very large pot/griddle that spans two burners can be heated by both burners. |
What size bolts fit the mounting holes on the base? | Grinder base nominal borehole size is 7/16" allowing use of 3/8" size bolts (two). Base boreholes are located parallel to the grinder shaft and are located immediate below each shaft spindle end. |
What size bolts fit the mounting holes on the base? | The mounting hole diameter measures exactly 9.92 m ( metric of course as it was made in China) and that should accept a 3/8" bolt (S.A.E).I like this unit. |
What size bolts fit the mounting holes on the base? | I believe they are 3/8. My partner put it together for me with the OneWay grinding jig set up. He used the existing foot pads on the bottom of the plywood with our own screws. The Grinder does not come with mounting bolts. |
What size bolts fit the mounting holes on the base? | I'm using 3/8" bolts to mount the grinder, which leaves a little slack for minor adjustments. |
What size bolts fit the mounting holes on the base? | I ran a 3/8 bolt up through my mounting board - when it is bolted down you have to look at the wheels to make sure it is running it runs that quiet - I really like this unit!! |
What are the dimensions of the weights alone (without any shipping packaging)? | each leg weight weighs 2 1/2 lbs. each leg weight is 12" long from buckle to strap each weight is 5" wide velcro strap is 8" long |
What are the dimensions of the weights alone (without any shipping packaging)? | They are 3 1/2" long and 2 1/2" diameter - there is a total of 8 sleeves to hold the weight cylinders in each ankle weight. |
What are the dimensions of the weights alone (without any shipping packaging)? | each leg weight weighs 2 1/2 lbs.each leg weight is 12" long from buckle to strapeach weight is 5" widevelcro strap is 8" long |
I just want to know will this work with my PS4 and how much GB will I have left after installing the OS? Will it cause the system to heat up faster? | It will. I had a little less than 1.4tb left on the drive. No idea about over heating but I have not had any issues. |
Is this induction ready? | No, it does not work on induction. I expected it too as it is stainless, but doesn't have enough stainless to create the magnetic field necessary. |
Does it hold Kat Von D's Studded Kiss Lipsticks? I just bought a lipstick holder from byAlegory and those are the only ones that do not fit. | I just bought this lipstick holder based on the previous answer of "yes", but it turns out this lipstick holder does not fit Kat Von D's studded kiss lipsticks. |
will this card work with Dell Optiplex 960 SFF? | it might work with your system but make sure to open the tower and locate the port where the mini half card will go. make sure you have the latest bios just in case. download the intel 5300 drivers from intel.com and install them with the card installed. according to this website it should not be a problem. http://www.dell.com/us/business/p/optiplex-960/pd make sure you find the port before buying and compare... |
will this card work with Dell Optiplex 960 SFF? | it might work with your system but make sure to open the tower and locate the port where the mini half card will go. make sure you have the latest bios just in case. download the intel 5300 drivers from intel.com and install them with the card installed. according to this website it should not be a problem.http://www.dell.com/us/business/p/optiplex-960/pdmake sure you find the port before buying and compare... |
will this card work with Dell Optiplex 960 SFF? | The intel website is real good for answering what wireless cards will work. depends on your version of windows you are running.http://www.intel.com/content/www/us/en/wireless-products/wireless-product-selection-guide.html |
Are these sheets Teflon coated? | Product Description Super flexible sheets are coated with DuPont Teflon for non-stick fruit leathers, rollups, taffies. Reusable for years.These Dehydrator Sheets are easily cleaned with a warm water rinse, they are also dishwasher safe. I do find them a little thinner than the Excalibur brand. They tend to flap with the fan going when making fruit rolls. |
Are these sheets Teflon coated? | Yes, I believe they are Teflon coated. The work great in my Excalibur dehydrator. |
Are these sheets Teflon coated? | They are thin sheets of Teflon. I have had thicker sheets before but these work just fine for me. I use them in art projects and nothing sticks. Some colors stain them a little but that does not bother me. |
Are these sheets Teflon coated? | That is a good question and almost impossible to answer without having a brand name behind the product. Paraflex sheets use Teflon coating except for their Ultra sheets which are silicone. I prefer using silicone covered parchment which expedites drying time and can often be used for storage afterwards. Good luck! |
Are these sheets Teflon coated? | Product DescriptionSuper flexible sheets are coated with DuPont Teflon for non-stick fruit leathers, rollups, taffies. Reusable for years.These Dehydrator Sheets are easily cleaned with a warm water rinse, they are also dishwasher safe. I do find them a little thinner than the Excalibur brand. They tend to flap with the fan going when making fruit rolls. |
Are these sheets Teflon coated? | I don't know about Teflon but they are non stick. Sorry I couldn't be more informative. There wasn't anything with the sheets to explain why they were non stick. |
Will this work with the mid 2014 macbook pro with retina? | I thought I had retina size. Instead i have a regular macbook pro 13. I have to buy a new one. Thanks. |
Can you install grommets on the corners? | The sheet comes with 4 peel & stick tie-off loops that you stick on so there is no need for grommets |
Can you install grommets on the corners? | Yes, you could, but you would have to reinforce it with heavy-duty duck tape or something similar around the grommets if you are going to tie it off with guy-lines, otherwise it would tear through when stressed, particularly in the wind. I would tape up both sides of the Tyvek with at least one inch squares of heavy-duty duck tape (maybe two layers) and then press in your grommets. hopefully that would do it. |
Can you install grommets on the corners? | Yes grommets can be installed in Tyvek, if done correctly but the easiest way is to buy adhesive grommet tabs that you just stick on. There is heavy duty or ultralight white grommet tabs. |
how does this sprayer work with latex paints? | It works great especially for the newer paints. To test it after buying it, I sprayed epoxy primer (1.8mm tip), base color (1.5mm tip), and urethane clear (1.3mm tip). The gun performed flawlessly. I would suggest you keep a cheap gun for the primer and use this for color/clear, so you don't have cross-contamination from the primer. I use a Husky HVLP (about $50) that works great. I would buy this gun again. I use it on classic Corvettes.... |
how does this sprayer work with latex paints? | I haven't sprayed any type of paint although the different spray nozzles should handle it. |
Will this fit a 55 Ich flatscreen tv? is this real wood and not partical wood? | My 55" fits end to end. I would not want to sit the TV on the stand. It looks good with the TV floating a few inches above the stand. I love the unit. Good quality and excellent for storage. |
Will this fit a 55 Ich flatscreen tv? is this real wood and not partical wood? | I have a 50 inch that hangs over it. 55 would probably be too big. This is not a real wood console. It is pressed wood with a veneer over it. It also doesn't have very good airflow where the components sit. We have a playstation inside the glass area and it gets really hot in there. I will likely have to drill some extra vent holes to let it ventilate better. |
Will this fit a 55 Ich flatscreen tv? is this real wood and not partical wood? | My 55 inch Panasonic led sits comfortably on this stand. It's not made of real wood, but it looks good. |
Will this fit a 55 Ich flatscreen tv? is this real wood and not partical wood? | It fits my 60 inch with no prob... it will definitely hold your 55inch tv.It is Real wood. Not particle board. You need two people to haul it inside the house after it arrives. You need to assemble it and it is very heavy and sturdy, so you need some help to hold the pieces together. Took us 4 hours and there were 3u of us putting it together. It will definitely last more than 5 years |
Will this fit a 55 Ich flatscreen tv? is this real wood and not partical wood? | It is partial board but very sturdy. It hold our flat screen perfectly and keeps DVD's out of kids hands |
Will this fit a 55 Ich flatscreen tv? is this real wood and not partical wood? | I think it's partical wood. Real wood with laminate on top. Still looks gorgeous though. |
Will this fit a 55 Ich flatscreen tv? is this real wood and not partical wood? | We purchased this for my mother's 46" inch flat screen tv. The tv fits to the edge with no overhang. It depends what look you want. I think that it will hold a larger set, as it is very sturdy, heavy and well made (my husband thinks it is wood) but the larger set will extend over the edges of the cabinet. My husband was able to easily put it together with minimal assist from me (and he said that he is a dummy!lol) All in all we are pleased with the purchase and would buy it again. |
Can the rear camera be viewed on the Display for rear view monitoring while parking? | Hello Thanks for your message, the image of the rear cam would be showed on the top right of the screen no matter park or drive. Hope this can help you, have a nice day:) Regards |
how do you use the lifetime map update? mine is over two years old | If you have an LMT ( lifetime maps and traffic) download GARMIN EXPRESS from your search engine or Garmin.com. Connect the unit to your computer ( preferably not a laptop) and your compute should recognize the unit and GARMIN EXPRESS should start up and show you the updates available. |
how do you use the lifetime map update? mine is over two years old | I believe you just go to the Garmin Website And download it. I'm sure there are also Garmin Support sites that could assist as well. |
could this be attached to the body discreetly? | I did attach it discreetly when testing it. It just take a bit of creativity. I used the clip attachment, clipped it to my tshirt, (put black tape over the logo and the lights), zipped up my jacket, and had a scarf just brushing the top. It is amazing that no-one even noticed it. And because of the lens of the camera, it takes in a wide shot and is able to see more than just what is directly in front of it. With all the different attachments it comes with, you can figure out a creative way to video discreetly. |
could this be attached to the body discreetly? | Possibly. Use black electrical tape to hide the 'muvi' logo and the flashing green light. And wear a black or dark colored shirt. I clip mine on a old belt I wear around my chest, under a button down shirt. |
could this be attached to the body discreetly? | No but We carry the camera's on the front of our uniform shirt and have found that placing the camera that way draws almost no attention. Hide in plain site. |
Will these work for external speakers on my 2007 gmc envoy? Would i need to puchase an additional amplifier and if so what is the best one to get? | No they will not. You are only supposed to mount speakers to the inside of your vehicle you damn porch monkey!! |
Will these work for external speakers on my 2007 gmc envoy? Would i need to puchase an additional amplifier and if so what is the best one to get? | Without knowing the details of the installation I can't answer your question. But I mounted them in the rear facing gun wall of my boat. As for the amp...I did add an amp as well. I chose to match my amp manufacturer to my stereo manufacturer, Sony. It sounds great. |
Hi there, how much to send 2 of these to Auckland, NZ? | I don't know if Amazon ships to NZ but you can always check ebay. I carry them from time to time. http://www.ebay.com/usr/nanassecretstash |
noise from engine & loud noise from electric antenna up and down....how do i fix this can't listen to anything | In my case I have no problem with no interference would advise you to talk to some other car accessories shop advise him, it is presumed that there should be no link with each other. |
Can someone explain the resolution in (2400 x 600) dpi and (1200 x 120 dpi) I would like to understand the difference before please. | DPI is dots per inch. 2400 dots per inch wide by 600 pots per inch high. More dots equal nicer looking image. |
I was wondering if these would fit & work on my 2014 Ninja 300 for the vibration? | I have them on my 1990 Harley FXSTS and they do dampen the vibration significantly as for the fitment JandP has a chart. |
I was wondering if these would fit & work on my 2014 Ninja 300 for the vibration? | Hello,I don't know what Kuryakyn grips you now have, but they should fit, and will help.I would confirm with Kuryakyn.jPB |
I was wondering if these would fit & work on my 2014 Ninja 300 for the vibration? | I have no experience with Kawasakis but if you have the Kuryakyn grips, they should screw in to the ends and they help dampen some of the vibration but not completely and I like the added extension. They fit great on my 2010 Road King. |
I was wondering if these would fit & work on my 2014 Ninja 300 for the vibration? | I installed these on a 2011 Stratoliner which is quite a bit different than the Ninja 300 so cannot answer your fitment question. I'm sure if you contacted Kuryakyn, they would be able to recommend the correct part. As far as vibration, I couldn't really tell any difference, but then the Strat isn't a Ninja. |
It is possible to change the camera angle? | There are YouTube videos about how to mod the ar drone in many ways ( including changing the camera angle). |
It is possible to change the camera angle? | I moved mine, check out 'utube' "parrot A Drone 2.0 Camera Mod Hack Pointing Camera Down" |
It is possible to change the camera angle? | No. Both the front-viewing and bottom-viewing cameras are stationary. I guide the drone around to change what the camera sees. |
What is the height of the front rail? | @ Krystal T. No more then 4 ft. Trust me your baby can't climb over it plus you can let do the rail for easier access |
Work to Dominican Republica - Orange, Claro adn Viva GSM? | It work fine in panama 850 gsm the only thing you have to change manully the servers to get 3g. The phone works fine |
Work to Dominican Republica - Orange, Claro adn Viva GSM? | Sure! I mean, it's totally unlocked. I live in Venezuela and it works perfectly. It should have no problem in Dominican Republic. |
How long does it take to heat up the water in the hottest setting? | 5 1/2 minutes. At first that felt like a long time. Now I love it - I simply occupy myself with something for that time and I am not microwaving my water. |
Can you have someone else convert your kit to a mesh kit? I don't want to try and mess the whole thing up. | I am not sure if you can do that. Most of the research I have seen is DIY in nature. |
Can you have someone else convert your kit to a mesh kit? I don't want to try and mess the whole thing up. | There's nothing to it. If you can change a regular drum head then you can do this. About 10 minutes per drum. My 5 yr. old grandson could do it. |
Is this compatible to the Ipad Mini? | No, the iPad mini has a new lightning 8 pin connector and this one uses the old 30 pin connector. Apple does sell an adapter but I'd recommend getting a newer 8 pin adapter compatible device. |
Can the cover be removed for washing | The heating pad comes with a fleece-like cover that can be washed in a washing machine. This cover creates the "moist" part of the moist heat-pad effect. |
Can the cover be removed for washing | It certainly can be. I haven't yet because I mostly just lean against it with having it on the back of my chair. It does have velcro top and bottom which can help to hold it where you want it. Enjoy! |
Can the cover be removed for washing | The cover slips right off like a pillow case and it washes very easily just be sure the velcro strip is folded closed so it doesn't get caught on other garments while laundering or you can seperate it from other garments by putting it in a small laundry bag during wash. You'll LOVE this heating pad. It is so soothing and comforting. |
Will it fit a 15" Macbook Pro ? | Technically it would fit, but really really tight. We have a 13 and a 15 and tested it, I personally would not keep my 15 in it. |
Will it fit a 15" Macbook Pro ? | No I dont think so...My 12" Dell latitude fits fine with a bit of slack. Perhaps a 13" fits but 15" would be pushing it |
Will it fit a 15" Macbook Pro ? | Yes, it will fit 15" MacBook Pro. But it might be a little tight while putting into compartment, because the zipper is opening in "L" shape and not opening completely from the top. The thickness of the laptop matters too. My 13" Asus Zenbook (0.30" width) fits with an extra place, if MacBook Pro is thicker than it might not fit.I hope that was useful.All the best. |
Will it fit a 15" Macbook Pro ? | Yes, it will fit 15" MacBook Pro. But it might be a little tight while putting into compartment, because the zipper is opening in "L" shape and not opening completely from the top. The thickness of the laptop matters too. My 13" Asus Zenbook (0.30" width) fits with an extra place, if MacBook Pro is thicker than it might not fit. I hope that was useful. All the best. |
Will it fit a 15" Macbook Pro ? | I use PC but have not used it yet. But according to the instructions for packing and from friends. a 15" computer will fit in . Please check the website to confirm this. |
If the product is "old" will the picture still come out vibrant looking? Mine came out slightly faded from the original picture. It is a couple years old still in the original package. | I had to change the settings on my printer to be more vibrant. I don't think it had anything to do with how old the pkg. was. Try to darken your image before printing and "up" the color tones. |
Anyone know if this has a blocking diode built in? I have several panels wired in parallel and need to know, but the company has been slow to answer..... (Update) I'm not worried about frying anything, just efficiency. If multiple panels are wired in... | I am reasonably certain that there is no blocking diode on the panel. I bought two panels and put in my own diodes. |
Does The "12 pack" in the picture actually mean 12 lamps? | I don't remember if it said 12 pack when I ordered it, but I received the lamp, and thats it. I don't like the clamp used to anchor the lamp to the table. Other than that, I love my lamp. |
I am 5"6 and weight 120 lbs what would be the size recommended??? | Hi. I'm really not sure. The entire thing runs small (you need room to move around). What ever size you wear in say, a cotton swet suit, i would go up at least an addition size. That is if the smaller ones run like the larger one I have. |
I am 5"6 and weight 120 lbs what would be the size recommended??? | I wear a size 6xl and I order a 6xl it was too small ...Order a size bigger then you wear |
I am 5"6 and weight 120 lbs what would be the size recommended??? | I would go with a medium. Just in case you want another couple of layers underneath |
Subsets and Splits