query
stringlengths 20
2.05k
| answer
stringlengths 75
2.05k
|
|---|---|
Has anyone used this net as a garden trellis net and if so how does it work out. | I have not used it as a garden trellis. I believe it would stretch to easily to give support. |
Does this have a backlit lcd display | It does have a back light, you do have to turn it on, using the "Light" button, the middle button in top row of buttons on the upper right. I did not realize there is a backlight as I have not needed the light. I always use this in my studio. Your question caused me to look. Thanks for asking this question. |
Does this have a backlit lcd display | Yes, it does have a backlit, but you have to turn it on. I found I really didn't need it most of the time. Great metronome, lots of features that take a bit of a learning curve. It is my main metronome. |
does this come with instructions on how to remove the right amount of old sole and how to apply the new? | No it doesn't come with instruction, replacing the half soles, you just put the new sole on top of the old, if it is warp on one side just sand it down so both soles are the same size ,then you use the rubber glue. |
I'm looking for a cooktop that is solid black. Some of them have little speckles in them. Is this cooktop solid black? Thank you | No evidence of 'speckles' in mine . . . a glossy, solid black, with only feint burner outlines. Truly elegant! |
What is the Difference between an L14-30P, L14-30R, & L14-30C? | http://www.powerfig.com/nema-locking-chart.aspx P Male R and C Female. I know P and R go together. C looks like R but I don't know the difference. |
What is the Difference between an L14-30P, L14-30R, & L14-30C? | A c is a female cord end. A r is a female receptacle and a p is a male plug end |
How well does this perform while in the retracted position? | In the retracted position is performs like a rubber duckie antenna. It will work but range will be decreased. |
How well does this perform while in the retracted position? | Not very well, it works ok fully extended. The best Antennas I have are the Nagoya 701 and 771, they are fixed length but work awesome. The 701 is the short one 7" and the 771 is about 15". |
How hard is it to quick-release the light from the mount? I have to apply quite a bit of pressure to release the light from the mount. | I have no problem removing the light from the mount. Are you using the release tab to slip the light off? |
How hard is it to quick-release the light from the mount? I have to apply quite a bit of pressure to release the light from the mount. | I dont feel like I have force anything or feel like its going break..but it does not accidently pop out of the mount after a hard bump. I like yhe light overall..especially usb charged and significant brightness. I feel that u were hit by a car comin at u ..they were texting or they meant to hit u. |
How hard is it to quick-release the light from the mount? I have to apply quite a bit of pressure to release the light from the mount. | When I first tried to pry it off I thought I was going to break it. It gets a little easier with time but it's attached pretty firmly. |
How hard is it to quick-release the light from the mount? I have to apply quite a bit of pressure to release the light from the mount. | I do not find it difficult at all. I take my light off every time I lock up my bike. Just be sure and use the release tab. The light is nicely secured to the mount when in use. |
How hard is it to quick-release the light from the mount? I have to apply quite a bit of pressure to release the light from the mount. | I have found it is more of a technique issue as opposed to a brute strength issue. I can pop it off in under a second...but I've gotten used to doing it. Just practice doing a "press & pull", it'll smooth out! |
How hard is it to quick-release the light from the mount? I have to apply quite a bit of pressure to release the light from the mount. | Not difficult at all, but having said that, one of the spare mounts I bought had an issue. I got one that apparently wasn't finished correctly (there was a full 1/8 inch of plastic under the release tab which appeared to be part of the mold tree) which caused my light to become jammed onto the bracket. Fortunately I was eventually able to get the light off without damage and, once removed, correct the problem with my Dremel. Works fine now and looks about the same as my other mounts. |
How hard is it to quick-release the light from the mount? I have to apply quite a bit of pressure to release the light from the mount. | I have found it easy to release most of the time. You might try a little dry lube to see if that helps. We have three of the lights here and they all interchange without an issue. |
How hard is it to quick-release the light from the mount? I have to apply quite a bit of pressure to release the light from the mount. | I find if i use two hands, on to hold the light and one to press on the quick release, it does not take too much force to release the light. On mine it does tend to rotate around the handlebars if i do not grab the light which results in me having to use additional pressure to release the light. |
Is the alarm audio, visual or both? | Visual only. Best part it will log the past 24 hours. So you can view readings over time. Peace |
Which stick length is best if you want to do your back and shoulders, but don't have a lot of space? | I have a 15 beads , 24" overall length , and find it works for my needs. This allows you to have both hands on the unit. You can get creative prop it up one end against sofa wil you can apply to back. Bests |
Which stick length is best if you want to do your back and shoulders, but don't have a lot of space? | The blue handled one. I don't start the day without it, and it does not require a lot of space. |
Which stick length is best if you want to do your back and shoulders, but don't have a lot of space? | my questimation woud be the width of your back plus a hand width on each side.. |
Which stick length is best if you want to do your back and shoulders, but don't have a lot of space? | From the instructions that came with mine (24") it illustrates how to use it on your back. |
Can you fit this into a shoe? | Yes you can. I've worn them with my trainers as well as formal shoes. They are a little uncomfortable in formal shoes but offers very good support. |
Can you fit this into a shoe? | Yes, very easily. Even with strapping it fits into a shoe. The only exception is if the shoe is very snug before brace then it would be a really tight fit. I wear my own in tennis shoes with no issue. |
Can you fit this into a shoe? | Yes it does fit in a shoe...it works very well. I love mine. and I think my daughter does too as she borrowed it and I got her old one back! |
I have trouble taking low light indoor videos (a musical show where the stage is lit in a dark room). Is there a way to adjust? | At Disney world in a show we had some luck with the night time fireworks setting. It wasn't 100% but we did get better shots than we had with other settings |
Can they be used separately, we want to use them as up lighting, sitting on the floor all around the room. Is this possible?? | Yes they can be used as uplighting in separate parts of the room just program what color on the dmx in the back and you are ready to party let me know if this helped |
Is this product made in USA ?? | I think they have a shop in USA but it is an indian product I think. Not sure. but it is good quality :) |
How id the underwater performance? image quality? leaks? The reviews are mixed and DPReview state there is a blue haze for underwater photos. | i thought the underwater per was great, although sometimes it was hard to see through my mask, which was my fault because of water leaking in my mask. of course there is a blue haze because you are under water. to get rid of that i think you need a more expensive camera with filter capabilities. for the price i think it works great! |
How id the underwater performance? image quality? leaks? The reviews are mixed and DPReview state there is a blue haze for underwater photos. | I thought underwater photos were fantastic on a sunny day. Very good on cloudy. Very durable my kids use it. No leaks. |
I'm buying this for my dad, he's paranoid about diabetes, but I have no idea what to look for. What else will i need once I buy this monitor? | You wil need to buy a box (10) of Ascencia auto discs. Also a box of 100 lancets. |
I'm buying this for my dad, he's paranoid about diabetes, but I have no idea what to look for. What else will i need once I buy this monitor? | a lot of test strip discs and a book or computer to record test values. This is an excellent unit for convenience and accuracy. |
How do I find a professional installer? | Most car audio stores can help you, but they will charge an hourly rate. Most are around 50-80$ hr. They should be able to do it for you. Car Toys did my install for about 350$ |
How do I find a professional installer? | Most audio stores, like Car Toys, will do backup camera installations. However, I used Google to search for "backup camera installers", here on Denver, CO to find an independent installer with good reviews on Yelp who did a good job at half the price of Car Toys. |
Will this go into a weider pro265 bench? Looking for one that could go into my Weider, the one they have is so expensive | I'm not sure. I have a marcy bench and I wasn't sure if it would fit but it does. The product is a little flimsy at the top but overall I think it's a good buy. Hope that helps. Best of luck on your search. |
Are there rings (silicone, slip, pressure...) used with this product. It doesn't seem to come with any? | Yes. There are 4 different "rings" that come with it. At least they came with the ones that I bought. |
Are there rings (silicone, slip, pressure...) used with this product. It doesn't seem to come with any? | I have not opened the last one of these that I ordered, but the one I did use came with a split ring and a silicone O-ring and a washer and I assembled them as instructed but have yet to test that part of the system ( I am replacing the existing galvanized plumbing system).I will be upset if the latest order does not contain the three piece sealing components-BTW they may be there just disassemble the unit n see if they are inside. |
the connect kept disconnecting if the heater was even slightly moved. Is there a special way to securely attach it to the heater? | Didn't experience this problem, but I haven't had a power outage where I had to use yet. |
the connect kept disconnecting if the heater was even slightly moved. Is there a special way to securely attach it to the heater? | As others have mentioned, the quick connect fitting on the hose has a sleeve that you pull back (towards the hose) as you slide the fitting onto the male quick connect on your heater. Make sure you slide it all the way onto that fitting until the sleeve snaps back into place. THEN, PULL ON THE HOSE END TO BE SURE IT IS FIRMLY ATTACHED !!! When it is firmly attached, it will NOT pull off unless you again slide the sleeve of the fitting back towards the hose. That's how you remove it. With the gas turned off, slide the sleeve back and pull the fitting off of the one on the heater. |
the connect kept disconnecting if the heater was even slightly moved. Is there a special way to securely attach it to the heater? | Do you have a quick disconnect or a thread ends mines a thread end make sure you push it all the way on be for turned the gas on hope this helps if not go to YouTube you may find what you're looking for |
the connect kept disconnecting if the heater was even slightly moved. Is there a special way to securely attach it to the heater? | There is a sleeve on the heater end of the hose that must be pulled back. This allows the ball bearings inside the sleeve to retract so that the coupler can mate with the heater fitting. |
Refresh rates do not match. Description says 240 but specs say 120. Which is it? | Thank you for your inquiry. The 65HU8550 is indeed 240Hz Motion Flow and actually has 1200 Clear Motion with the enhanced video processor. We hope you will consider The High Definition Store. |
Dose this Speaker have Deep Bass and A Subwoofer ??? | Dear Lamont, Thank you for your question regarding our BTX350 Bluetooth speaker. The BTX350 does have a subwoofer and a bass boost button to enhance the bass on the speaker. Please contact us at [email protected] if you have any additional questions. Thank you, Kinivo Product Support Email: [email protected] Toll Free: 1-855-4Kinivo (1-855-454-6486) Live Chat: http://support.kinivo.com (Mon-Fri: 9am-5pm Pacific) |
are these tires 20 x 1.95 or 20 x 2.25? | They are 20x2.25...really tough, sturdy tires. Much better than the stock tires they replaced. My daughter will outgrow the bike before they'll need new tires again. |
are these tires 20 x 1.95 or 20 x 2.25? | They are 20x 2.25. These tires lasted me over two years and had close to 800 miles on them before the were worn down |
Can I release the hood ? | Hi. I like this jacket...the hood does not come off, it is attached. But, the jacket is very light and packable, and the hood rolls down and secures with a velcro tab, like a rolled collar. I hope this helps. |
Are these liners deep enough to use in a medium to large stock pot? | I don't think you can use them in a stock pot I don't think they are made to be that hot of a pan. You would have to check the manufactures recommendations. But they do fit in a large oval crock pot. |
Will this fit a Craftsman Eager lawnmower with a 5 HP engine, Model 917 372480? | The model you have given is the mower model number. Look for the engine model number. Once you have that, go to Sears Parts Direct and enter model number of engine to see blow up of carburetor. You can obtain the part number from there. That is what I did. My engine model number was 143975038. |
i need the exact lowest and highest point in inches that the chair adjusts to. also what kind of wood is it made of? | 18" - 21" I don't know the wood but is well constructed. The chair is more of an off white though. |
what are the diamentions? it cannot be 1.5, 6.5 8.5 inches | I already opened it and threw the packaging away, but it fits on a standard crib sized mattress. |
what are the diamentions? it cannot be 1.5, 6.5 8.5 inches | Don't know exactly what the dimensions are, but it fits a standard crib matters perfectly. We love ours! |
what are the diamentions? it cannot be 1.5, 6.5 8.5 inches | I bought this on a lightning deal earlier this year and made the mistake of not trying it on the mattress before washing. The sheet was washed (since it was new) in cold water in Woolite and it shrank up to about three-fourths the original size. Don't know about all the others who said it fit their crib mattress but mine is exactly 28" x 52" and you could tug on it all day and it wouldn't fit. |
what are the diamentions? it cannot be 1.5, 6.5 8.5 inches | I think the measurements you listed are for the packaging it comes in. This sheet fits a standard crib -- 28" x 52". |
what are the diamentions? it cannot be 1.5, 6.5 8.5 inches | I'm not sure on the dimensions but it fits a 4 inch thick regular toddler/crib mattress. I have the colgate ultra II mattress and it fits that perfectly. |
what are the diamentions? it cannot be 1.5, 6.5 8.5 inches | I did a quick measurement of 45 inches in length and around 34 inches in width...this is the Easy Jersey Crib Fitted Sheet with polyester blend, not much different than the cotton other than the cotton has a little more snug fit. They are both great sheets, but during the winter the polyester blend does better for warmth and comfort. |
with it work with toshiba?? laptop | I believe so but I was disappointed in that I had it for a short time and one of the wires on the black box that connects the two cords came out making it inoperable. Keep your receipt just in case. It did work well until that happened however. |
Would this be a good stapler for installing 1/4" T&G Flooring | I think it would work just fine for 1/4" T&G.; If anything, it is better for thinner materials. Remember to test using scrap pieces to get the setting correct. |
Would this be a good stapler for installing 1/4" T&G Flooring | It seems the stapler is made to hanlde 1/4 planks as well. I don't see a problem |
Would this be a good stapler for installing 1/4" T&G Flooring | It is a "GOOD" / "Great" stapler. But for 1/4" I would use smaller gage staples or be realistic and Glue down .Best I can do for you |
can this unit be set for sensitivity,the unit i installed takes severe rocking of bike to set it off | It has 3 sensitivity settings. You set it by the remote. Press 2 buttons at the same time and the alarm will beep..one for high, two for medium and thrice (thats in the manual) for low. |
can this unit be set for sensitivity,the unit i installed takes severe rocking of bike to set it off | si claro la sensibilidad se configura desde el control remoto con pantalla lcd. |
can this unit be set for sensitivity,the unit i installed takes severe rocking of bike to set it off | Hi Brad. .. I don't think it can but in all honesty I would not use this ... It drains the battery and rarely works properly |
So this is solid wood? the description says Made from sustainable wood materials? | The frame for the drawers and dresser are but the bottoms of the drawer are not. However they still are pretty sturdy and so far the dresser has held together great. |
So this is solid wood? the description says Made from sustainable wood materials? | Parts of it are made with solid wood, we are pleased with it, my daughter is 13 months old and we are still using it every day. |
So this is solid wood? the description says Made from sustainable wood materials? | Ditto to Deborah V and the other Amazon Customer. I don't use it everyday; even so, I can tell it is very solid. I expect to use it long after it is used as a changing table. |
Is the screen protector glass? | Nope, it is plastic, been using for it for about 7 days ? now no scratches. I wouldn't want glass because of weight and most likely more fragile than the hard phone glass screen. |
Is the screen protector glass? | It would be great if they could develop a glass like material that was durable and cristal clear. Until then, we're stuck with plastic. |
Can I use the Revolver Drill brush on the shower glass. The soap buildup has been impossible to remove. | I use this brush to clean my boat. It is very good. I am sure it would take the crud off the shower glass but I would be careful if there are gaskets or some kind of silicone to seal around the edges. I think the brush would eat it up over time. If you have tried a razor blade scraper with any success, the sell wide ones in Home Depot or Lowes. We use that to get the soap build up off of the marble in our shower. |
Can I use the Revolver Drill brush on the shower glass. The soap buildup has been impossible to remove. | I've used mine for that purpose. You will probably still need a cleaner for whatever you're trying to remove. |
Can this be used when lying in bed with hard cover and soft cover books? | It works with hard or soft cover books of most any size, but I use it on a hard surface (table or counter top) to have hands free while cooking or eating. If you were sitting in bed with it on your lap, that might work. I don't think it would be of much use lying down. |
Can this be used when lying in bed with hard cover and soft cover books? | No this is not good for soft cover books. There is a bamboo collapsible stand you can find online that is perfect for any kind of book. |
Can this be used when lying in bed with hard cover and soft cover books? | If you have a lap desk it might work. It is really weak and I don't use it. If the book is a full novel it won't fit. I had trouble using it with my leather Bible. A waste of money. I hope this helps. |
Can this be used when lying in bed with hard cover and soft cover books? | Fellowes Wire Study Stand-Silver (10024)Is much sturdier. This thing is a flimsy piece of junk that has a hard time standing by itself. Won't hold small nor tall nor heavy books. |
How does this shirt fit for a big guy? My husband doesn't like tight fitting shirts and wears a 2x. He is 5'8 and approx 280. Would love some feedback | I'd consider looking at the ColdGear shirts that are labeled as "Regular" or "Loose" fitting if he doesn't like tight shirts. The "fitted" like this shirt is, is form fitting and is close to your skin (not baggy at all). You can probably find these on Amazon too, but here is the link to UA's regular and loose fitting ColdGear shirts since it is easier to filter for just those:http://www.underarmour.com/shop/us/en/mens/apparel/tops/longsleeve/loose/regular-fit/coldgear#products |
How does this shirt fit for a big guy? My husband doesn't like tight fitting shirts and wears a 2x. He is 5'8 and approx 280. Would love some feedback | I'd consider looking at the ColdGear shirts that are labeled as "Regular" or "Loose" fitting if he doesn't like tight shirts. The "fitted" like this shirt is, is form fitting and is close to your skin (not baggy at all). You can probably find these on Amazon too, but here is the link to UA's regular and loose fitting ColdGear shirts since it is easier to filter for just those: http://www.underarmour.com/shop/us/en/mens/apparel/tops/longsleeve/loose/regular-fit/coldgear#products |
How does this shirt fit for a big guy? My husband doesn't like tight fitting shirts and wears a 2x. He is 5'8 and approx 280. Would love some feedback | I'm 6' 260 ..2x fits just about right for me...but I would say it's more snug ...I'm not really happy with the "warmness" of the garment...I've had better warmth with a heavy cotton tee and a good flannel actually.... |
Does anyone have experience installing and using this system on an Epson RX 595 Photo printer? I'm concerned about installing it. | I installed the Continuous Ink System on my Epson Artisan 810 which has stationary ink cartridges, and on my Epson 1400 wide-carriage printer with moving ink cartridges. I was leery about installing the CIS on both printers, but both installations were successful and I save so much money on printing pictures as large as 13"x19" in size. The inks are high quality indistinguishable from Epson inks. Before you actually install the tubing, study where it's going to lay and make sure the tubing does not block the printer cover from closing. I trimmed some plastic to allow unimpeded flow of ink in the tubing. I used 3M damage-proof large picture pads that one would hang picture frames to a wall to mount the CIS reservoir to the side on the printer if your printer has a non-curved side. The 3M pads would hold the reservoir in place yet it would not be a permanent mount in case you needed to remove it for servicing the printer. I hope this helps you make a wise decision. I am so glad that I bought the CIS for both of my printers. |
Does anyone have experience installing and using this system on an Epson RX 595 Photo printer? I'm concerned about installing it. | This product didn't work for me. I purchased this for my Epson Stylus inkjet printer but it ended up ruining the printer heads.Now even if I put back the original ink, it looks all blur and mis-colored. I recommend to think hard about the possible consequences before purchasing it. |
Which one fits my needs? | check all 4 products (nioxin system 1, system 2, system 3 & system 4) -- they each target more specific problems. |
Which one fits my needs? | I suggest you go to Nioxin's website as the information there will help you determine which one you need. I am very happy with their product and it has made a huge difference. http://nioxin.com/en-US/home-page.aspx |
Which one fits my needs? | This system is great. I have used Nioxin for a year now. I am trying different systems to see if there is a difference. I recently quit using over the counter mouse and am realizing after 2 weeks it may be a part of my problem with breaking hair. |
Is the Beech color like a light beige? Also what are the dimensions of the bed when it is open? | We purchased the brown color so I cannot help with the color of the Beech. We purchased the convertible sofa for our 5th wheel camper to replace two rocker recliners so we would have extra sleeping capacity. Since the sofa is in our camper I cannot tell you the exact dimensions of the sofa when down as a bed, but I can tell you it is at least the size of a double bed, on our last camping trip our daughter and son-in-law slept on it comfortably. |
Is this fully assembied when it arrives? | Yes it is....just add chain oil. Check chain tightness after a bit. New chain will stretch some. |
Is this fully assembied when it arrives? | yes its ready to use, just fill it up with oil ,,,,,,,,,,,,,, and go , Its fun. good luck |
Will this battery work in my Vtech 2151 phone? | Very very unlikely. All of these batteries are VERY unique and only for a particular series of phone. VTEC has so many phones and series of phones and they are NOT interchangeable with the batteries.I suggest you do a search of your particular VTECH series and buy the battery associated ONLY with that series #. |
Will this battery work in my Vtech 2151 phone? | ^^^ per my last response-- I cant even answer my phone right now, so I am screwed until I buy another battery |
Will this battery work in my Vtech 2151 phone? | My phone is vtech too, so probably. However, i just bought this battery for mine just a couple weeks ago, and it worked fine at first, but is now no good and won't hold a charge. You get what you pay for! I recommend get the name brand replacement battery- this one is cheap and won't last long |
Will this cut a half circle like the end of a movie ticket? | If you don't put the paper in all the way you can make it cut half circles. I like to use the punch upside down so I can see what/how much I am pinching out. Hope this helps. |
can it be cut to fit | Yes, it can be cut. Be sure to measure well and take into account the fact that you may want the sheet to also cover maybe an inch or so over the sides.. for a seamless look. |
Is it possible to replace the wheels if they shred, since they are foam? | I am not sure if they are foam, but they seem to be the same as wheels on a regular baby stroller. |
Is it possible to replace the wheels if they shred, since they are foam? | I have no idea. Mine are still fine. Actually , I did not realize they are foam. |
is this ok for oily skin use? | I like this one because it sinks into the skin quickly and doesn't feel greasy after awhile like other creams. |
Hi there; I just placed an order for the Titan set. I forgot to look and see if it includes hardware.??? | Yes, it came with 4 lag bolts and washers. It should work well as long as you attach to a solid beam or joist. |
Will a 165 Dakine Low Roller bag hold a 166? (the next bag size up is 175, which is huge) Thanks | Hi Karen, well I have never put it to the test, however I just pulled out my bag and measured it and overall and inside and it is around 170cm so should be no problem for a 166cm board. Its a fine bag and has plenty of room for additional kit. Cheers John |
DOES IT FIT A XDm 45 4.5" | If I recall the xdm does not lock into the holster. Your best bet is to test fit one at a gun shop. |
DOES IT FIT A XDm 45 4.5" | I was told yes but I haven't personally tried I did go to the gun shop and look at the 40 compared to the 45 and they look the same size but you could probably look up the specs I got this for my xdm 40 |
DOES IT FIT A XDm 45 4.5" | My XDm 40 SW 3.8" fits really well with 1.25-1.5" left of barrel space at the end of the holster. |
DOES IT FIT A XDm 45 4.5" | Yes, that is the gun I ordered it for. They are made to accomidate several differant makers and models. Make sure you get the correct one. |
DOES IT FIT A XDm 45 4.5" | I do not know about the "45". I own an XDm .40 and yes, without question it fits and fits well - my .40 is a 4.5". |
DOES IT FIT A XDm 45 4.5" | I had to very slightly modify it to fit my XDM 5.25 comp. (a little light filing on the bottom where the barrel barely pokes through). I think it would probably fit a 4.5 with no trouble at all. |
Subsets and Splits