sentence-transformers/amazon-qa · Datasets at Hugging Face

query stringlengths 20 2.05k	answer stringlengths 75 2.05k
How soon can this item be shipped out? I need it by Tuesday.	This item is currently fulfilled by amazon when buying select next day shipping to get it on Tuesday, good luck
I'm wondering if I could use this card to route my xbox sound into via the SPDIF/IN, has anyone tried feeding this thing an exterior signal?	Technically you could, but it wouldn't make a bit of difference to the sound. It is already decoded leaving the Xbox. Breaking down the signal and rebuilding it is not the same thing, fidelity wise.
I'm wondering if I could use this card to route my xbox sound into via the SPDIF/IN, has anyone tried feeding this thing an exterior signal?	I routed my TV into the soundcard, so I'm assuming it should be possible. Not entirely sure how I did it because it took some messing with settings.
Can I use this to make a sugar scrub?	I haven't used this to make a scrub, I usually use grapeseed oil for that...that being said, I don't see why this wouldn't work.
Can I use this to make a sugar scrub?	I haven't used it for a sugar scrub. Need to give it a try, but I don't see any reason it wouldn't work. It worked great for soap. It has a thick, smooth consistency.
Have an old tube of this, it is clear like water, but a yellowish substance is mixed in. Has this broken down with age? What color should it be?	Yes most of the waxes have a short life span,Max 6 months. It does break down and create a watery substance if you don't use it for a long time.
How long does it take a battery to charge in the charger?	Kate, battery charge rates vary depending on temperature, degree of discharge and age of the battery. With a new battery, at room temperature and in a normal state of discharge, about an hour will do it.
How long does it take a battery to charge in the charger?	I have two sizes of batteries - the large one can take up to 2 hours if it close to total discharge. The smaller battery (the one that came with my camcorder) takes about an hour.
How long does it take a battery to charge in the charger?	This is a good product. Charge lasts much longer. I would buy this product again! I advise everyone - is a good product!
Some of these cuts look really intricute. I was wondering how they cut out. Will they cut out small enough for a card?	I use mine for A5 and C6 cards, for smaller intricut pieces try a sample with slower speed, hope this helps
The picture shows the green model, but modern ram is blue, so are you paying for an older version or the latest thing(in blue)?	I got the green one and it works fine, I don't know if it's the old model or not, I hope that's helps.
The picture shows the green model, but modern ram is blue, so are you paying for an older version or the latest thing(in blue)?	I checked the manufacture date using a software to read the bios and it was only 2 months since it was manufactured. I can pretty much say it was very new. I don't know much about the color coding because I just used the manufacture date. hope it helps, good day
Is it for round , square , and rectangle shaped tables ? What is the measurement ?	This is for a round table. The table sat 10 people comfortably and the cloth was perfect in that we do not like the cloths to go to the floor and bunch at our legs. WE WERE VERY SATISFIED WITH THIS PRODUCT.
Is this too big/thick for a key chain?	No, I don't think it's too big for a key chain. It's the same length as most car keys. It's a little wider than the blade of the key, but narrower than the handle part. I think it would be good on a key chain. I've had my Foursevens for quite a few months now, and I love it. Very compact (I carry it in my jeans watch pocket). Very good quality, long battery life (especially on low and medium power), and very bright beam on high power, considering the small size.
Is this too big/thick for a key chain?	That's how I carry it. It's less bulky than my car key. Hopefully this link works: https://dl.dropboxusercontent.com/u/12253146/Photo%20Dec%2019%2C%208%2045%2040%20PM.jpg
Is this too big/thick for a key chain?	For me yes, but your mileage may vary. It is about a little larger then chapstick. I like to have nothing on my keys.
Is this too big/thick for a key chain?	Not at all, ive had it on mine for a while. Its the length of your pinky finger and about the same thickness. Lil bigger than a battery. Very handy light and durable.
Did others butyl tape come with no indentification that it is actually a dicor product? i paid more for dicor but no proof that is what i got.	Butyl tape and putty tape are similar. Neither have a manufacturers mark as they are shipped in bulk and it keeps down costs. Really no way to be certain it is Dicor. DICOR is all we sell at this time. Thanks for asking AMBOSALES
I am considering taking this mattress abroad. Would it fit in a luggage? Does it fold? What is the size of the box this mattress comes in? Thank you.	It comes in three sections. So if you pack right out of the box, I believe it will fit.
I am considering taking this mattress abroad. Would it fit in a luggage? Does it fold? What is the size of the box this mattress comes in? Thank you.	When deflated, it folds well. I would think it would fit in a small suitcase.
I am considering taking this mattress abroad. Would it fit in a luggage? Does it fold? What is the size of the box this mattress comes in? Thank you.	Sorry, just found out emails from Amazon were going to an old email address. The box is 20" x 18" x 4.5". Hope this helps.
Do you send the Disk or do we down load ??	It is, according to Microsoft, a pirated disk and key. Disk comes with burned CD and a paper key with no COA or other validation.
On which side do you stick it up against the window? The darker side or white side?	apparently, it doesn't matter. I tried it on both side, no difference in reception. BTW, it doesn't have to be on a window. I just put it on an interior wall and, presto change-o, better service immediately. My only regret is not buying one of these sooner. Why did I fiddle around with rabbit ears for the tv over the fridge (and the antenna would periodically fall down when I opened the freezer door), when I could have had this instead.
How can I remove restrictor?	I used a paper clip that I made a very small 'hook' on the end. I went into the neck of the head and hooked the O-Ring that restricts the flow.
How can I remove restrictor?	Carefully use a paper clip or similar instrument to pull the tiny little washer out. And ONLY the tiny little washer. It might take a little while, just be patient.
How can I remove restrictor?	I used a dental pick. You simply put the tip of the pick under the black O-Ring and remove it. It improved the flow and function measurably.
How can I remove restrictor?	You can read some of the other reviews that tell you how, but when you get it, it's plainly visible and can be removed with needle nose pliers.
Do these filters have the flavor enhancing microholes that some Melitta filters have?	No they don't. Maybe I got a bad batch, they cannot handle more than 4 cups of water before they break apart in the basket, dumping the coffee grounds in the pot.
Will this trim fit my 2014 Nissan Rogue? Will 15 feet be enough for all four doors? Thanks.	Yes, FYI I covered the 2 doors of my FJ cruiser and all 4 doors of my wife's dodge journey.
Will this trim fit my 2014 Nissan Rogue? Will 15 feet be enough for all four doors? Thanks.	Its universal. Should fit any door. The pack I bought went on a Jeep and a Chevy pickup. Covered all 4 doors.
Will this trim fit my 2014 Nissan Rogue? Will 15 feet be enough for all four doors? Thanks.	Hi... dont know about the N, Rogue . But I put it on all four of the doors of 2006 Envoy and I have over 3 feet left. Looks very sharp on a white suv and my white F250 pick up..Very easy to install,just dont put it on and pull it off its got glue inside of it.measure twice cut once or start by putting on at the top and cutting when you get to the bottom.Hope that helps a little..Jay
I have a CT laser, can I use this with the laser turned on, or do I need to use the iron sites???	These targets are for use with the trigger activated lasers sold for conversion of an air soft gun. Not real Ammo. I am using a very realistic solid steel simulator with CO2 blowback from BLRMachiniing.com the BFR Laser Handgun Trainer. You can also just point and click a laser pen at the target and the"shot" will register, cool too. Don't SHOOT these targets... only fire laser beams at them. Hope that answers the question. Not sure about iron sites.
I have a CT laser, can I use this with the laser turned on, or do I need to use the iron sites???	The LaserLyte target is sensitive to the amount of light hitting it. If you turn a light on that is too close to the target it won't work right. The CT lasers are fired by 3 volt batteries, the LaserLyte lasers use 1.5 volt. I would not expect the target to work with a 3 volt laser and you could burn it out.
I have a CT laser, can I use this with the laser turned on, or do I need to use the iron sites???	If you use it with the laser turned on, then each place the laser touches will register as a shot. You will need to use the iron sites to properly record your shots.
Does it fit HK .22 LR MP5 A5?	I'm sure it will fit however I fount this mount to be narrower than the standard mil spec. I had to shim the optic to make it sturdy. Irritating
Does it fit HK .22 LR MP5 A5?	Do not know, only have an ATI GSG. Can not confirm if or how well would fit. Best to ask the seller that question.
Does it fit HK .22 LR MP5 A5?	Bought one for my clone, as long as it had the rail clamps grooves on top, you're good to go! It fit my HK MP5 clone perfect!
Does it fit HK .22 LR MP5 A5?	yes.I bought 2 different brands before i found this one sold by acid tactical and it was the easiest and best fit. I would highly suggest this one.
Does it fit HK .22 LR MP5 A5?	Yes it fits the mp5 22...that's what I have mine on. The HK and the GSG version are basically the same specs.
I have older prime lenses for my 30+ year old Nikon F2, will they be adaptable for the 600?	If your older prime lenses are AI or AIS they will work great on you D600. I have six AIS lenses that I use on my D600 with great results. However, if your lenses are the older pre-AI lenses they may damage the sensor so be careful. You can google online to learn how to determine if your lenses are AI or AIS.
I have older prime lenses for my 30+ year old Nikon F2, will they be adaptable for the 600?	Holly,I don't know specifically how that lens would work on the D600. I haven't used any old lenses on my D600 yet. But I have used some old lenses I had for my Nikon FE on my D90 and they would work, BUT they can only be used in completely manual mode (manually setting your shutter speed, F-Stop and Focus), so you have to calculate your exposure the old fashioned way based on lighting conditions, ISO setting, etc - to figure out the what's the correct Shutter/F-Stop combo to use. Since the D600, D90 and the FE all use the F-mount, the older lenses should mount on the D600 and work as they did on my D90. Holly,I don't know specifically how that lens would work on the D600. I haven't used any old lenses on my D600 yet. But I have used some old lenses I had for my Nikon FE on my D90 and they would work, BUT they can only be used in completely manual mode (manually setting your shutter speed, F-Stop and Focus), so you have to calculate your exposure the old fashioned way based on lighting conditions, ISO setting, etc - to figure out the what's the correct Shutter/F-Stop combo to use. Since the D600, D90 and the FE all use the F-mount, the older lenses should mount on the D600 and work as... » Read More Holly,I don't know specifically how that lens would work on the D600. I haven't used any old lenses on my D600 yet. But I have used some old lenses I had for my Nikon FE on my D90 and they would work, BUT they can only be used in completely manual mode (manually setting your shutter speed, F-Stop and Focus), so you have to calculate your exposure the old fashioned way based on lighting conditions, ISO setting, etc - to figure out the what's the correct Shutter/F-Stop combo to use. Since the D600, D90 and the FE all use the F-mount, the older lenses should mount on the D600 and work as they did on my D90. « Show Less
I have older prime lenses for my 30+ year old Nikon F2, will they be adaptable for the 600?	Hey Holly. That's one of the benefits of Nikon and the F mount. So long as it's F mount it will work. Their lens mount has evolved over the years, but it was always backwards compatible. I have a few lenses that are in the 30 year range and have no issues with them. By all means use them! some of those are gems.Acutally i only use a 50mm 1.2 AIS on my D600... and that's 31 years old.
I have older prime lenses for my 30+ year old Nikon F2, will they be adaptable for the 600?	Holly,I don't know specifically how that lens would work on the D600. I haven't used any old lenses on my D600 yet. But I have used some old lenses I had for my Nikon FE on my D90 and they would work, BUT they can only be used in completely manual mode (manually set your shutter speed, F-Stop and Focus), so you have to calculate your exposure the old fashioned way based on lighting conditions, ISO setting, etc to figure out the what's the correct Shutter/F-Stop combo to use. Since the D600, D90 and the FE all use the F mount, the older lenses should mount on the D600 and work as they did on my D90. Holly,I don't know specifically how that lens would work on the D600. I haven't used any old lenses on my D600 yet. But I have used some old lenses I had for my Nikon FE on my D90 and they would work, BUT they can only be used in completely manual mode (manually set your shutter speed, F-Stop and Focus), so you have to calculate your exposure the old fashioned way based on lighting conditions, ISO setting, etc to figure out the what's the correct Shutter/F-Stop combo to use. Since the D600, D90 and the FE all use the F mount, the older lenses should mount on the D600 and work as they... » Read More Holly,I don't know specifically how that lens would work on the D600. I haven't used any old lenses on my D600 yet. But I have used some old lenses I had for my Nikon FE on my D90 and they would work, BUT they can only be used in completely manual mode (manually set your shutter speed, F-Stop and Focus), so you have to calculate your exposure the old fashioned way based on lighting conditions, ISO setting, etc to figure out the what's the correct Shutter/F-Stop combo to use. Since the D600, D90 and the FE all use the F mount, the older lenses should mount on the D600 and work as they did on my D90. « Show Less
I have older prime lenses for my 30+ year old Nikon F2, will they be adaptable for the 600?	Hey Holly. That's one of the benefits of Nikon and the F mount. So long as it's F mount it will work. Their lens mount has evolved over the years, but it was always backwards compatible. I have a few lenses that are in the 30 year range and have no issues with them. By all means use them! some of those are gems. Acutally i only use a 50mm 1.2 AIS on my D600... and that's 31 years old.
I have older prime lenses for my 30+ year old Nikon F2, will they be adaptable for the 600?	I have a couple of older auto focus lenses that work great with the D600. You can do a Google search for "Nikon lens compatibility", and you can find charts that show which lenses work with which cameras.
I have older prime lenses for my 30+ year old Nikon F2, will they be adaptable for the 600?	The answer is yes...conditionally. They need to be AI, AI-S series lenses. There is no AF with these lenses; metering modes may be restricted, as well as program modes. As Dan says, many of the lenses can made compatible, but not all.
I have older prime lenses for my 30+ year old Nikon F2, will they be adaptable for the 600?	It should work just fine, this is a great advantage of the Nikon's f-mount over Canon...
are these non GMO seeds?	Do not know. Didn't say on ad. Best to search the web on the history of this pepper.
are these non GMO seeds?	I'm not sure if they were. As far as they looked like a natural seed. Hope this helps?
are these non GMO seeds?	I'm not sure how to tell the difference. You would probably have to ask the seller. Mine are planted already and I am waiting for them to come up.
are these non GMO seeds?	extremely unlikely. GMO products tend to be industrialized cash crops such as soybean, corn, etc. Super hot peppers don't have the kind of market that would encourage a company to genetically modify them. Those super hots that are commercially grown for pepper spray are from Trinidad and other South American countries where there is little involvement by companies that perform GMO processes.
Are the suspenders completely removable (and not just detachable)?	They have Velcro strips at the bottom of each of the four contact points. So yes they are. I prefer using the suspenders myself, it keeps the support right where I want it.
Are the suspenders completely removable (and not just detachable)?	I checked, the one my worker has is ecured to belt by velcro - so, yes the suspenders are removable
I'm getting this for my cub cadet 50" zero turn. already has the deck nozzle, but had to buy this for the adapter.....	Make sure you let the spindles are cooled down when you use the wash down system other wise you will damage them and it will cost you about $75.00 per spindle to replace. The alum. housing will not take much to fail where the lower steel bearing seats into the alum. spindle housing. to me its a bad design, casing should be also made of steel or cast metal.
I'm getting this for my cub cadet 50" zero turn. already has the deck nozzle, but had to buy this for the adapter.....	If its the same configuration it should hook right up, most are a simple quick disconnect system with the same configuration.
I'm getting this for my cub cadet 50" zero turn. already has the deck nozzle, but had to buy this for the adapter.....	I'm sorry I wish I can answer your question but it won't let me see your question
what is the maximum weight the board can keep a rider alfoat?	Sorry, no help here. We ordered 8 Body Boards in different sizes for our grandchildren. We read reviews and purchased the best we could. Plan to use them in Hilton Head end of July.
what is the maximum weight the board can keep a rider alfoat?	At 180 lbs., I am fine on this board. I would imagine you can notch up another 10 to 15 lbs.
I have a F250 Super Duty with a 2.5" receiver. Can I use this cover?	Yes, it has two sizes of brackets depending on what size hitch you have. But does not come with the pin?
How many inches long is the power cord for this pump?	Im about 6 foot and I can step on the plug and hold the pump over my head about 72 inches.
Does the product you received seem fresh? I know, with mate it can be hard to tell. Is there a freshness date on the package?	Never bothered to look for freshness dates. It has always been (Cruz De Malta) best quality and I do not believe mate can get stale.
Does the product you received seem fresh? I know, with mate it can be hard to tell. Is there a freshness date on the package?	We transferred from the package to a container almost immediately as the package was not retaining the very, very fine Mate particles (dust, basically). I'm still enjoying it and wouldn't know freshness criteria as I've only ever had Mate in tea bags before. This product has crushed white stem pieces visible in it...I don't know if that's normal or it's filler to bring down the price. I like the product but normally mix it with other flavored teas which may be committing "tea heresy" but I'm enjoying it nonetheless. My wife says it's good for me.
Does the product you received seem fresh? I know, with mate it can be hard to tell. Is there a freshness date on the package?	I did not see a freshness date on the package, but the product was fresh. Great quality and flavor.
Does the product you received seem fresh? I know, with mate it can be hard to tell. Is there a freshness date on the package?	usually doesn't come with a due date. You can keep it in a dry place for a long time. It is like the tea.
does it open and close the doors	It simply locks and unlocks both driver and passenger doors, and the trunk!Works great for us! Thinking remote starter next!!!
Why does it say mix with NON-Citrus juice? Is there a problem if mixed in orange or lime?	This contains certain probiotics and enzymes that might get denatured in low pH. In other words, these useful bacteria/proteins might "die" in slightly acidic juices like orange/lime.
Why does it say mix with NON-Citrus juice? Is there a problem if mixed in orange or lime?	I don't really know, the best thing is to go to there website and ask them. I always put them in my smoothy, so I didn't even know you shouldn't put them in citrus juice.
What about a 2008 Z? Would these fit?	Nope, but there is a product for this. Do this search" "Nissan 350Z Custom Fitted Luggage Bags"
I have a Francisco Navarro will this system fit on my guitar	The Anthem comes with 5 parts which need to be attached: Saddle Transducer, Microphone, Battery holder, 1/4" female Jack/Strap holder, and the Sound Control Mechanism. This Electric Acoustic System works with just about any conventional standardized single circle, Sound Hole Acoustic Guitar. I suggest you consult with any qualified professional Luthier for installation questions, as LR Baggs warrantee issues will require it. I love mine - had the first one replaced which went bad after about 6 months, but LR Baggs responded well and quickly after I showed the Luthier installation receipt. Good Luck if you go down this path and make sure you get an Acoustic Guitar Amplifier, and not an Electric Guitar Amp. Once you hear a Good Electric Acoustic Guitar, it is hard to go back to just Acoustic.
Is there supposed to be two empty knife slots? If so, whick knives go in them? Thanks!	Yes there are 2 empty slots. I purchased 2 more knives to fill them in. Love them, but be careful they are extremely sharp...
Is there supposed to be two empty knife slots? If so, whick knives go in them? Thanks!	It's been awhile, but I believe there are empty slots. I eventually purchased a mush larger block to which I have added additional Wusthof knives, like the boning knife, a Santuko, and another (level up grade), chef's knife.
according to wahl s website the new senior has the 9000 series motor. Does thus product have the 9000, or is it old stock with the 5000?	I has the same question when I purchased mine. The trimmer has the new one.
inside dimensions (inches) ??	About 5 inches long by 1inch wide.. It is a bit flexible with with.. Hope this helps
inside dimensions (inches) ??	Do not know, but my iPhone in a protective shell gas about 1/4 inch of clearance plus the case has elastic at the ends, so you get a bit more wiggle room
inside dimensions (inches) ??	The cases usually are designed and labeled specifically for the 4S. They normally arent sold based on dimensions.
I intend to use this printer outside the USA with 220V current. Is there any problem that I must be aware of when using it in these conditions? Thank you for your answer	The power supply is rated for 100-240VAC 50/60Hz 0.6Amp so you should not have a problem.
does it come with top and bottom coat in the set?	I got a base coat. If you are looking forward to the colors you see you will not get them I got a lot of glitter polishs & doubles
Why does it say Hotel Life instead of Hotel Comfort on the outer case? I've been warned that there are knock-off's.	I got mine from a reputable warehouse. I don't think the one i got is a knock off. Nice pillow but not for the price I pay.
Will this work with Dahua IPC-HFW4300S 3MP Eco-Savvy cameras?	I'm not sure as this product was returned as it was not needed. I recommend that you send a message to the seller.
Will this work with Dahua IPC-HFW4300S 3MP Eco-Savvy cameras?	It should work - the specs on the camera say PoE (802.3af) which is what the poe injector puts out. Works just fine on my hikvisions that use the 802.3af POE standard.
Will this work with Dahua IPC-HFW4300S 3MP Eco-Savvy cameras?	No experience with that camera, generally, look at the power requirements of the device, both voltage and wattage to be safe. I have had to limit to 5 or 6 devices because of higher power draw of VOIP phones. Or get the bigger power supply.
Can you use skype with the Nabi tablet?	Sorry I do not know. I imagine you may be able to as it has the camera front/back view and you are able to get Wi fi
Can you use skype with the Nabi tablet?	I contacted you and you said you would replace it but didnt. because it only worked 6 months
Can you use skype with the Nabi tablet?	Hi Donna! You can definitely use Skype on all nabi tablets. My family uses it when either myself or my wife are away on business and want to see how our kid's day went.
Would this hold a 7.5" long flash standing up?	Yes. It has multiple compartments of various measurements. I measured the depth and you will have no problem with 7.5" height. Good luck!
Can I fit an AMD FX Sabertooth regular sized ATX MOBO? The specs are 12.0" x 9.6".	I would say probably not since it isn't made for regular ATX Mobos. My microATX mobo is already snug in there as it is.
replace electric cord on 9300	I returned unit, did clean pool as advertised when I call Mfg. the reply was unit not designed to clean a dirty pool only to keep clean pool clean.
replace electric cord on 9300	Easy to do, but not worth it. The cable can be replaced and the original installation will have the cable rubbing against a rotating part of the cleaner that will eventually rub through the wires exposing them to water and shorting out the cable. Other than fears of qualified technician can only replace the cable, anyone that knows how to keep water from getting into the connectors can do this. BUT it is not worth it! the wheels need to be replaced almost every year at $22/wheel! Great idea, just does not meet the reliability of the 280 or 380
replace electric cord on 9300	I would guess they make one, but next time mine goes out it's going in the trash. It a piece of junk.
replace electric cord on 9300	I haven't had to yet but it has crossed my mind who I would go to. I would imagine a reputable pool equipment supplier / provider.
replace electric cord on 9300	Depends on what issues you're having. Unless the cord has been severed or cut you can have an issue with the control box
Can you go completely upside down on this? Does not show it on photos. Also - I am 6ft, will this accomodate me?	it may hold you upside down,remember that thre's a part that's intend to provide ajustments for your height measurements,so it depends on how you adjusted....have fun with it...its a marvelous equipment,I used it almost every day,for my herniated disks....
Can you go completely upside down on this? Does not show it on photos. Also - I am 6ft, will this accomodate me?	6 ft should be okYou can go completely if you take the SAFETY BAR off. I don't see any instructions that say to do this.I have done it a couple of times but need someone to get me back to vertical.My back stretches pretty good with the safety bar installed so I don't remove it often
Can you go completely upside down on this? Does not show it on photos. Also - I am 6ft, will this accomodate me?	Are you able to do ab exercise without the fear of returning to the upright position
Can you go completely upside down on this? Does not show it on photos. Also - I am 6ft, will this accomodate me?	Yes you can go completely upside down if you take the stop bar off. Not a problem at all, I have been doing it daily for months. However, the manufacturer doesn't mention this in their paperwork. Just ensure secure and tight hold on your ankles for safety. When fully inverting, your back will come off the board several inches. This is great because it allows you to hang there and grab the frame and pull yourself and strectch in different directions to get the most of your inversion. With full inversion I have found I feel much better when I stretch in every possible direction as compared to just hanging there. To return to upright position on this table simply put one hand behind headrest pulling board back to your body. Using the other hand grab frame in front of you and began turning yourself over. Once you reach the point you can grab handrails, grab each and finish flipping yourself back upright (slowly to prevent headrush). A little practice and it's easy....And yes, table will adjust to your height.
Can you go completely upside down on this? Does not show it on photos. Also - I am 6ft, will this accomodate me?	Hi Kris, sorry so late on my response but yes it will. I'm 5'9" with no issues and have had a few larger friends on it with no problem. This inversion table is steady and it's one item I've been happy with the quality vs price ratio.
How can you use the Westone3 as smartphone headset (i.e. to place calls)? Can you replace the cable or buy an accessory?	For me it is just a earphone without mic on the cable. Of course the cable is replaceable but I doubt if there is a product that you can find, to use it for a phone call.
How can you use the Westone3 as smartphone headset (i.e. to place calls)? Can you replace the cable or buy an accessory?	I use this thing just as a very high quality and very compact headphones for my wife, who does not like big headphones
How can you use the Westone3 as smartphone headset (i.e. to place calls)? Can you replace the cable or buy an accessory?	You use the earphones to listen and just hold your phone up to your mouth to speak.The westone 3 don't have replaceable cables. The new 3R models have replaceable cable and you may be able to find a cable with a mic built in.
How can you use the Westone3 as smartphone headset (i.e. to place calls)? Can you replace the cable or buy an accessory?	You use the earphones to listen and just hold your phone up to your mouth to speak. The westone 3 don't have replaceable cables. The new 3R models have replaceable cable and you may be able to find a cable with a mic built in.

How soon can this item be shipped out? I need it by Tuesday.

This item is currently fulfilled by amazon when buying select next day shipping to get it on Tuesday, good luck

I'm wondering if I could use this card to route my xbox sound into via the SPDIF/IN, has anyone tried feeding this thing an exterior signal?

Technically you could, but it wouldn't make a bit of difference to the sound. It is already decoded leaving the Xbox. Breaking down the signal and rebuilding it is not the same thing, fidelity wise.

I'm wondering if I could use this card to route my xbox sound into via the SPDIF/IN, has anyone tried feeding this thing an exterior signal?

I routed my TV into the soundcard, so I'm assuming it should be possible. Not entirely sure how I did it because it took some messing with settings.

Can I use this to make a sugar scrub?

I haven't used this to make a scrub, I usually use grapeseed oil for that...that being said, I don't see why this wouldn't work.

Can I use this to make a sugar scrub?

I haven't used it for a sugar scrub. Need to give it a try, but I don't see any reason it wouldn't work. It worked great for soap. It has a thick, smooth consistency.

Have an old tube of this, it is clear like water, but a yellowish substance is mixed in. Has this broken down with age? What color should it be?

Yes most of the waxes have a short life span,Max 6 months. It does break down and create a watery substance if you don't use it for a long time.

How long does it take a battery to charge in the charger?

Kate, battery charge rates vary depending on temperature, degree of discharge and age of the battery. With a new battery, at room temperature and in a normal state of discharge, about an hour will do it.

How long does it take a battery to charge in the charger?

I have two sizes of batteries - the large one can take up to 2 hours if it close to total discharge. The smaller battery (the one that came with my camcorder) takes about an hour.

How long does it take a battery to charge in the charger?

This is a good product. Charge lasts much longer. I would buy this product again! I advise everyone - is a good product!

Some of these cuts look really intricute. I was wondering how they cut out. Will they cut out small enough for a card?

I use mine for A5 and C6 cards, for smaller intricut pieces try a sample with slower speed, hope this helps

The picture shows the green model, but modern ram is blue, so are you paying for an older version or the latest thing(in blue)?

I got the green one and it works fine, I don't know if it's the old model or not, I hope that's helps.

The picture shows the green model, but modern ram is blue, so are you paying for an older version or the latest thing(in blue)?

I checked the manufacture date using a software to read the bios and it was only 2 months since it was manufactured. I can pretty much say it was very new. I don't know much about the color coding because I just used the manufacture date. hope it helps, good day

Is it for round , square , and rectangle shaped tables ? What is the measurement ?

This is for a round table. The table sat 10 people comfortably and the cloth was perfect in that we do not like the cloths to go to the floor and bunch at our legs. WE WERE VERY SATISFIED WITH THIS PRODUCT.

Is this too big/thick for a key chain?

No, I don't think it's too big for a key chain. It's the same length as most car keys. It's a little wider than the blade of the key, but narrower than the handle part. I think it would be good on a key chain. I've had my Foursevens for quite a few months now, and I love it. Very compact (I carry it in my jeans watch pocket). Very good quality, long battery life (especially on low and medium power), and very bright beam on high power, considering the small size.

Is this too big/thick for a key chain?

That's how I carry it. It's less bulky than my car key. Hopefully this link works: https://dl.dropboxusercontent.com/u/12253146/Photo%20Dec%2019%2C%208%2045%2040%20PM.jpg

Is this too big/thick for a key chain?

For me yes, but your mileage may vary. It is about a little larger then chapstick. I like to have nothing on my keys.

Is this too big/thick for a key chain?

Not at all, ive had it on mine for a while. Its the length of your pinky finger and about the same thickness. Lil bigger than a battery. Very handy light and durable.

Did others butyl tape come with no indentification that it is actually a dicor product? i paid more for dicor but no proof that is what i got.

Butyl tape and putty tape are similar. Neither have a manufacturers mark as they are shipped in bulk and it keeps down costs. Really no way to be certain it is Dicor. DICOR is all we sell at this time. Thanks for asking AMBOSALES

I am considering taking this mattress abroad. Would it fit in a luggage? Does it fold? What is the size of the box this mattress comes in? Thank you.

It comes in three sections. So if you pack right out of the box, I believe it will fit.

I am considering taking this mattress abroad. Would it fit in a luggage? Does it fold? What is the size of the box this mattress comes in? Thank you.

When deflated, it folds well. I would think it would fit in a small suitcase.

I am considering taking this mattress abroad. Would it fit in a luggage? Does it fold? What is the size of the box this mattress comes in? Thank you.

Sorry, just found out emails from Amazon were going to an old email address. The box is 20" x 18" x 4.5". Hope this helps.

Do you send the Disk or do we down load ??

It is, according to Microsoft, a pirated disk and key. Disk comes with burned CD and a paper key with no COA or other validation.

On which side do you stick it up against the window? The darker side or white side?

apparently, it doesn't matter. I tried it on both side, no difference in reception. BTW, it doesn't have to be on a window. I just put it on an interior wall and, presto change-o, better service immediately. My only regret is not buying one of these sooner. Why did I fiddle around with rabbit ears for the tv over the fridge (and the antenna would periodically fall down when I opened the freezer door), when I could have had this instead.

How can I remove restrictor?

I used a paper clip that I made a very small 'hook' on the end. I went into the neck of the head and hooked the O-Ring that restricts the flow.

How can I remove restrictor?

Carefully use a paper clip or similar instrument to pull the tiny little washer out. And ONLY the tiny little washer. It might take a little while, just be patient.

How can I remove restrictor?

I used a dental pick. You simply put the tip of the pick under the black O-Ring and remove it. It improved the flow and function measurably.

How can I remove restrictor?

You can read some of the other reviews that tell you how, but when you get it, it's plainly visible and can be removed with needle nose pliers.

Do these filters have the flavor enhancing microholes that some Melitta filters have?

No they don't. Maybe I got a bad batch, they cannot handle more than 4 cups of water before they break apart in the basket, dumping the coffee grounds in the pot.

Will this trim fit my 2014 Nissan Rogue? Will 15 feet be enough for all four doors? Thanks.

Yes, FYI I covered the 2 doors of my FJ cruiser and all 4 doors of my wife's dodge journey.

Will this trim fit my 2014 Nissan Rogue? Will 15 feet be enough for all four doors? Thanks.

Its universal. Should fit any door. The pack I bought went on a Jeep and a Chevy pickup. Covered all 4 doors.

Will this trim fit my 2014 Nissan Rogue? Will 15 feet be enough for all four doors? Thanks.

Hi... dont know about the N, Rogue . But I put it on all four of the doors of 2006 Envoy and I have over 3 feet left. Looks very sharp on a white suv and my white F250 pick up..Very easy to install,just dont put it on and pull it off its got glue inside of it.measure twice cut once or start by putting on at the top and cutting when you get to the bottom.Hope that helps a little..Jay

I have a CT laser, can I use this with the laser turned on, or do I need to use the iron sites???

These targets are for use with the trigger activated lasers sold for conversion of an air soft gun. Not real Ammo. I am using a very realistic solid steel simulator with CO2 blowback from BLRMachiniing.com the BFR Laser Handgun Trainer. You can also just point and click a laser pen at the target and the"shot" will register, cool too. Don't SHOOT these targets... only fire laser beams at them. Hope that answers the question. Not sure about iron sites.

I have a CT laser, can I use this with the laser turned on, or do I need to use the iron sites???

The LaserLyte target is sensitive to the amount of light hitting it. If you turn a light on that is too close to the target it won't work right. The CT lasers are fired by 3 volt batteries, the LaserLyte lasers use 1.5 volt. I would not expect the target to work with a 3 volt laser and you could burn it out.

I have a CT laser, can I use this with the laser turned on, or do I need to use the iron sites???

If you use it with the laser turned on, then each place the laser touches will register as a shot. You will need to use the iron sites to properly record your shots.

Does it fit HK .22 LR MP5 A5?

I'm sure it will fit however I fount this mount to be narrower than the standard mil spec. I had to shim the optic to make it sturdy. Irritating

Does it fit HK .22 LR MP5 A5?

Do not know, only have an ATI GSG. Can not confirm if or how well would fit. Best to ask the seller that question.

Does it fit HK .22 LR MP5 A5?

Bought one for my clone, as long as it had the rail clamps grooves on top, you're good to go! It fit my HK MP5 clone perfect!

Does it fit HK .22 LR MP5 A5?

yes.I bought 2 different brands before i found this one sold by acid tactical and it was the easiest and best fit. I would highly suggest this one.

Does it fit HK .22 LR MP5 A5?

Yes it fits the mp5 22...that's what I have mine on. The HK and the GSG version are basically the same specs.