query
stringlengths 20
2.05k
| answer
stringlengths 75
2.05k
|
|---|---|
How do I replace my motherboard?
|
It would depend, when did you buy it? what caused it to fail? i would recomend calling the manufacturer.
|
How do I replace my motherboard?
|
This is a pretty vague question. If you have a laptop or a pre-built computer chances are you can't and could only get it replaced by claiming a warranty. If you built your own computer I would assume you know how. If a friend did it you should either ask him to do it or look online
|
Is there a way to easily mount and remove the Fugoo Style or Fugoo Sport to a car or truck dash board?
|
If your serious, I would consider Velcro. It should hold to point it, and removes easy. Your just gonna have hard time removing velcro if you don't want it later. Maybe look at Command products from 3M.
|
Is there a way to easily mount and remove the Fugoo Style or Fugoo Sport to a car or truck dash board?
|
We have not mounted ours to anything but it does look like it can be mounted to different surfaces with optional accessories. It is a way cool speaker and my son wants to mount it to his wake board. Guess we will try that next summer.
|
Is there a way to easily mount and remove the Fugoo Style or Fugoo Sport to a car or truck dash board?
|
hmmm there isn't anything built-in if that's what you mean... but the bottom of the speaker is pretty flat so you could probably stick a couple velcro strips on the bottom of the unit and some onto your dashboard? I think that would definitely be strong enough to hold it in place while driving and wouldn't affect the design/aesthetic of the speaker or your car!
|
Where is this pump made? Is it well made? How many ounces does it move per stroke of the pump lever?
|
Haven't had any trouble with mine I've pumped 15 gallon or so with it since I put it in service.
|
will it work on any low shank machine?
|
Yes it will work on a low shank machine.....but I don't like the end results of this foot. This is my opinion.....
|
Which coaxial is "in" and which is "out" --it does not seem to be marked.
|
Folks: They are marked. Remove the cable dressing plastic device and the markings are right below it. Now, why anyone in their right mind would cover them is a different question. Incidentally, the phone jack furthest from the coaxials is the "In"The other two are the ut" and the coaxial closest to the phone jack is the "In".
|
Which coaxial is "in" and which is "out" --it does not seem to be marked.
|
Coaxial is not only not marked, but a user manual is unavailable from Belkin. These are such basic oversights that this will be my only Belkin product purchase until I recover any semblance confidence in the brand.
|
Which coaxial is "in" and which is "out" --it does not seem to be marked.
|
Folks: They are marked. Remove the cable dressing plastic device and the markings are right below it. Now, why anyone in their right mind would cover them is a different question. Incidentally, the phone jack furthest from the coaxials is the "In"The other two are the Öut" and the coaxial closest to the phone jack is the "In".
|
Which coaxial is "in" and which is "out" --it does not seem to be marked.
|
Got the same question about the phone jacks. It's pathetic that they are not marked.
|
Does this really wash out in 28 washes?
|
If anyone still needs to know, it washed out in 20. Med golden brown /truffle. I wash every day after workouts. Conditioner with kit is fantastic!
|
Is this mount 1 solid piece or 2 piece?
|
This is a two piece set, one portion attaches to the back of the tv the other to the wall. Works really nice, you'll like it.
|
Is this mount 1 solid piece or 2 piece?
|
The mount that attaches to the wall is one solid piece and then the two verticle pieces are seperate. They attach to the back of the TV which then hangs on the horizontal piece that has been attached to the wall. There is some side to side movement where you can slide the TV back and forth to help center it.
|
Is this mount 1 solid piece or 2 piece?
|
this mount is not strong enough to hold my TV which is 75 inches. If you have a smaller TV, I would yes recommend it.I ordered 2 set but I was unable to use them, let me know if you want to buy one from me... I would give you a good deal. Let me know
|
Can anyone confirm that the color of this driver is as the item pictured in the listing? I've seen variants where there was more yellow on the neck.
|
For what it is worth, mine is yellow in the neck. It is shameful, but it works just fine.
|
Can anyone confirm that the color of this driver is as the item pictured in the listing? I've seen variants where there was more yellow on the neck.
|
I confirm that the actual colour is exactly the same as listed in the picture.
|
Can anyone confirm that the color of this driver is as the item pictured in the listing? I've seen variants where there was more yellow on the neck.
|
You are correct that there is more yellow in the neck in the screw driver with me.
|
What are the dimensions of the metal part of the banana plug (the width at it's widest point)? Thanks...
|
The plug is 1/8 of an inch. It has springs that extend out but are retracted when the plug is inserted in the receptacle.
|
What are the dimensions of the metal part of the banana plug (the width at it's widest point)? Thanks...
|
Right around 0.16 inches, or about 5/32 inch. Hard to measure exactly, they are flexible and spring loaded.
|
What are the dimensions of the metal part of the banana plug (the width at it's widest point)? Thanks...
|
The ones that come with the meter are .125 or 1/8 of an inch. I hope this is of help to you. Bill
|
Forgot to ask this! I have a motto: If it doesn't go in the dishwasher, it goes in the trash. Anyone put them in the dishwasher? What's the result?
|
I did put mine in the dishwasher. It was fine except for the red rubber on the handles had a white powdery residue on it, which I'm guessing was from my dishwasher soap. The residue easily washed away when I scrubbed the handles by hand.
|
Where can i get a cheap charger for it?
|
You don't need a charger as it comes with an attached usb thingy that you can insert into your computer and charge it from there. The usb thingy is slotted into the cameera strap. You just pull it out gently. Hope this helps.
|
Can i use it for iphne 5c?
|
No, I don't think so,because the iphone 5 and 5s are slimmer than the iphone 5c
|
Can i use it for iphne 5c?
|
No you cannot. iPhone 5/5s have the same specs. Unfortunately the 5c is rounder .
|
If the flame defender is used in an attic will the spray damage the wallbboard ceiling of the room below the extinguisher
|
No. The flame defender sprays dry powder which you can vacuum up after the fire is put out.
|
If the flame defender is used in an attic will the spray damage the wallbboard ceiling of the room below the extinguisher
|
I don't think the damage would be as bad as the fire might have been if any. Think it's just regular flame retardant . Peace and good luck
|
Is the sticker clear so it looks good on any color wall?
|
I sticked it on a blue wall and it looks good.!But i think it would be better on a normal white colored wall.
|
Is the sticker clear so it looks good on any color wall?
|
Yes, I got it for my boyfriend and it actually looks like it is in the wall.
|
What's the difference between oak and dark oak? Both show the same picture on Amazon. What's the color of the set in the picture? Thanks!
|
It is exact ally light it states light oak is like what wood flooring may be colored like sort-of this is a little darker - medium - not natal oak but a step darker like the picture
|
What's the difference between oak and dark oak? Both show the same picture on Amazon. What's the color of the set in the picture? Thanks!
|
The picture is of dark oak. From my experience oak is a lighter color, more like a blonde.
|
Does this product include Media Espresso and Power Director Mobile? (These are both included as a bundle on the Cyberlink site)
|
I'm not sure, you're best bet is to email Cyberlink and ask them if the boxed version includes those.
|
CAn the charging dock be used with this case? If so I will buy it now!
|
No its fully sealed so you cannot use the charging dock unless you take the phone out of the case
|
Which of the Kaiman goggles would you recommend? The regular with 2 size options? or the womens Kaiman? I'm a female of average size.
|
Mine were the regular size and I have an average to small face and the fit was great-my problem was the fogging after the first swim, sent back...Wish they would have performed better-the fit was great.
|
Which of the Kaiman goggles would you recommend? The regular with 2 size options? or the womens Kaiman? I'm a female of average size.
|
It really depends on the shape of your face. In my case, for instance, as I'm Asian, the regular size is good enough. I also sweat a lot and as the water prevents sweating in swimming in all water submersed parts of my body, I tend to have a sweaty face and the goggles usually slip if the adherence is not good. The Aqua Sphere products attend all my needs. The regular one is good for me. However, for my son (also Asian) the very smaller fit is better. My experience shows that females (Caucasian or Asian) prefer the regular one. When swimming, the best way is not to have a very tight goggle. I've been swimming for over 20 years (pools and sea).The only problem I was never able to solve is the fogging. However, the tighter you use your goggles the foggier it gets. Hope I've helped.
|
would this be good for sucking up gear oil, I work on gear boxes and thought this might be great for that
|
Gear oil sounds a little thick. But works good with water. The batteries where out fast so have two batteries.
|
would this be good for sucking up gear oil, I work on gear boxes and thought this might be great for that
|
I don't think the motor on this is sealed and who knows what kind of vapors you could be sucking up. Having said that, man what a mess, especially the suction hose.
|
would this be good for sucking up gear oil, I work on gear boxes and thought this might be great for that
|
Ur going to make a really big mess of the filter and inside, but I sucked a lot of automotive fluids up just not huge amounts at a time and it seems to do ok. There might be something out there more directly suited to that specific task though.
|
Does this come with the paddle?
|
Yes, it came with a paddle. If you are buying this for Christmas beware- ours came wrapped in see through plastic. I was in perfect condition but could ruin a surprise!
|
Does this come with the paddle?
|
I ordered the pink one and it did, it is a two piece paddle that comes apart in the middle with a "push button" to store.
|
Does this come with the paddle?
|
Yes both of ours did. One blue kayak and one orange. They are awesome , we bought for 4 & 5 yr old grandsons.
|
Overheating and slow start? I got the white unit and I love it. The problem I have is that gets warm pretty quick and seems to take a long time to wake up. Any ideas? I would appreciate it, thanks.
|
Thanks Daisy for your comment. After dealing with having to take the battery out to "unfreeze" and to wake it up, which as you can imagine, is a heck of an inconvenience when you just want to make a call, I sent it back. Will keep searching.
|
Overheating and slow start? I got the white unit and I love it. The problem I have is that gets warm pretty quick and seems to take a long time to wake up. Any ideas? I would appreciate it, thanks.
|
Beatritz: You probaly received a defective phone. My GNote does run a tiny bit hotter than other smartphones do, however, the hottest it ever ran was 85 degrees F. (It usually is below 60 degrees F or lower). The GNote just gets a little hotter I think because the battery is so HUGE.Hope you find the perfect phone for you.If anyone wants to add to this discussion, please feel free to do so.Regards,Daisy S
|
Overheating and slow start? I got the white unit and I love it. The problem I have is that gets warm pretty quick and seems to take a long time to wake up. Any ideas? I would appreciate it, thanks.
|
Thanks again Daisy. Getting hot was just one of the problems with Note. I always needed to wake it up from a deep sleep, which took a long time, that, plus needing to scan the media card completely until you could make a call, sometimes it would just get stuck, going nowhere, and I needed to take the battery out to make it go. It became too much trouble just to make a call.
|
Does it come with the straps that attach to the car to eliminate shaking?
|
I believe it does come with the strap but we don't use it. We bought the anti sway locking bolt and it does the job for us. Our bikes are very light. I also recommend a strap to stabilize the front wheel. We really like this rack. We bmx race and travel with our bikes 3 days a week.
|
Does it come with the straps that attach to the car to eliminate shaking?
|
Emil, it does come with a stabilizing strap. I also recommend the Velcro straps to stabilize your bicycle's front wheel to the frame. Keeps your handlebars from turning and bunging up your vehicle.
|
Is there now a problem with Vellux blankets having an unremovable chemical smell? Our old one never had that.
|
I did not have a problem with smell from the Westpoint blankets. However, they were very THIN. I have not received my Martex blanket. Hope that is not the case.
|
Is there now a problem with Vellux blankets having an unremovable chemical smell? Our old one never had that.
|
I am not sure. I ended up throwing the blanket away. It was stiff and not very comfortable. It wasn't what I expected.
|
Can you use it for the Babyletto
|
Hi, So sry, but I wouldn't know. I used it in a little tikes pirate bed and it worked perfectly. We love the mattress!
|
Will this cup holder fit the new I Phone 6?
|
It fits my Samsung Galaxy 4 and the new larger iPhone is only slightly larger. The holder has expandable sides and so I believe that it will hold your phone.
|
Will the entire unit fit well on the bottom of a whiskey barrel (used as the pond)?
|
Yes, I just went outside, took mine out and measured it. The pump and filter are 9 1/2" long, and mine is 16" high. The height is adjustable. I've had mine set up for over a year in a plastic planter that is similar to a whiskey barrel, and still have the original 3 goldfish in it, and they are doing fine. The circumference of mine is 75" and it is 16 inches tall. The only thing to be careful of is that the water pumped from the fountain remains in the barrel. When I first set it up, the fountain got bumped by my dog, and almost drained out the whole pond. Luckily I noticed and the fish were fine. But it only happened one time, and has been an easy care pond this whole time. I've only cleaned the actual pond once in a year, besides cleaning the filter. It's a wonderful way for anyone to enjoy a small pond.
|
Will the entire unit fit well on the bottom of a whiskey barrel (used as the pond)?
|
The box is a foot and the pump is less that 6 in long with a flexible tube I the middle which you can cut as far as the fountain and I have no idea how Tall it is. it's hard to say if it would fit but I think you could make it work that sounds like an awesome idea to turn a whiskey barrel on a good Luck and have fun
|
How many times can i charge my phone with this device before having to charge the power pack?
|
I have been able to charge by HTC EVO 4G LTE 4 times before recharging the power pack, but it really depends on how low you have lt you phone get. I try not to let mine go completely dead.
|
How many times can i charge my phone with this device before having to charge the power pack?
|
I have an HTC Evo, as I think the answer depends upon one's phone also. I can get a complete full charge plus have a little left over. Like a previous post, I only use this as a backup when I don't have other charging options. It definitely gets me through the day, even if I have no other charging available. It is an excellent power pack.
|
How many times can i charge my phone with this device before having to charge the power pack?
|
It really depends on the charge requirement for your specific phone and how "low" the phone battery is.
|
How many times can i charge my phone with this device before having to charge the power pack?
|
Look at the reviews. I remember one that was a great "technical" answer that talked about this. By the way, there are two Motorola power packs. I got this one as it has a "fuel gauge" to show me - sort of - the amount of power that is "left." Also, the off/on button is slightly recessed so it's harder to turn "on" by accident. Personally, I've never let the phone get totally out of power but if you were starting with "no power", I'm guessing you can charge your phone about 1 1/2 - 2 times! I use this for "emergencies" where I don't have access to the car charger. Hope this helps! Look at the reviews. I remember one that was a great "technical" answer that talked about this. By the way, there are two Motorola power packs. I got this one as it has a "fuel gauge" to show me - sort of - the amount of power that is "left." Also, the off/on button is slightly recessed so it's harder to turn "on" by accident. Personally, I've never let the phone get totally out of power but if you were starting with "no power", I'm guessing you can charge your phone about 1 1/2 - 2 times! I use this for "emergencies" where I don't... » Read More Look at the reviews. I remember one that was a great "technical" answer that talked about this. By the way, there are two Motorola power packs. I got this one as it has a "fuel gauge" to show me - sort of - the amount of power that is "left." Also, the off/on button is slightly recessed so it's harder to turn "on" by accident. Personally, I've never let the phone get totally out of power but if you were starting with "no power", I'm guessing you can charge your phone about 1 1/2 - 2 times! I use this for "emergencies" where I don't have access to the car charger. Hope this helps! « Show Less
|
what are the numbers to press to clear the old code ? I want to change the code but cant enter a new one until the old one is cleared
|
From e-How: 1 Press and hold the "PROG," "6" and the "Open/Close" buttons in that order until the red light on the keypad comes on and goes off. 2 Release the buttons when the red light goes off. 3 Press the "3," "5," 7" and "PROG" buttons and the red light will blink. 4 Enter the new PIN (a minimum of three and a maximum of eight characters). 5 Press the "PROG" button to confirm the PIN. 6 Press the "Learn Code" button, which is either on the keypad housing near the antenna (if the keypad has a black antenna) or in the external receiver compartment. Enter your PIN. 7 Press the "Open/Close" button. The "Learn Code" indicator light will turn on and stay on. 8 Press the "Open/Close" button a second time. The "Learn Code" indicator light will go off. To test the system, wait about 30 seconds after the indicator light goes off, enter your PIN, and press the "Open/Close" button. The garage door should move. Read more: http://www.ehow.com/how_7835821_change-wireless-keyless-garage-keypad.html#ixzz2vPhG5HBu
|
How many kits would you need for a 34' Winnebago? It's an '85, but looks like it has been stored outdoors in winter.
|
I did a 22 foot boat and used less than half of the components. I applied the system using Meguiar's dual action buffer. My boat is fairly new and stored indoors during the winter. Given this I'd order 2.
|
How many kits would you need for a 34' Winnebago? It's an '85, but looks like it has been stored outdoors in winter.
|
Probably 1 kit, but will probably need 1 more bottle of the oxidation remover.
|
How many kits would you need for a 34' Winnebago? It's an '85, but looks like it has been stored outdoors in winter.
|
I would be guessing but at least 3. Know this also it is not going to be a permanent fix. You'll have to repeat annually. My gel coat reverted back in 3 months.
|
What are the drawer size? Do you offer overnight delivery to zip code 30040?
|
Hello , the one that I purchased the drawer are about 3 inch tall and the upper compartment with lid its a little bit more than 3 inches. Hope this helps.Merry Christmas
|
What are the drawer size? Do you offer overnight delivery to zip code 30040?
|
Hello , the one that I purchased the drawer are about 3 inch tall and the upper compartment with lid its a little bit more than 3 inches. Hope this helps. Merry Christmas
|
exactly how long is the seating(not the bench). Are you able to set it up to put in a left or right corner?
|
The long side can fit two large adults and the smaller side can fit one adult and one child. You can put it together in either direction but the instructions are for the right corner.
|
are the tiles plastic or porcelain?
|
I doubt they are plastic. Pretty thick and dont break when dropped on a tile floor.
|
I recently bought few febreeze noticeable warmers. The light was onn few days and now it does not light up. How can fix it?
|
Hi Selina,I would make sure you did not have a power surge in your home. Make sure the device is completely plugged into the socket. If there is a reset button on the power outlet then do a reset. Beyond that, I am really not sure. Contact the person who you purchased it from and request a new one.I hope this helps. Good Luck!
|
I recently bought few febreeze noticeable warmers. The light was onn few days and now it does not light up. How can fix it?
|
Try moving the switch in the back several times. Check and make sure that the fluid jar is snapped in the unit all the way. If the unit is still warm it should be still working. Make sure you have power at the plug. The only other thing you can do is contact the company an see if you can get a replacement.
|
I bought the pink case and I really like it. But the keyboard doesn't work. Even though I charge the keyboard long enough, it says " low battery" so
|
Hi Zolzaya, I've been using my FOME wireless keyboard regularly for quite a while now with no problems. Your question is confusing me, since there is no "low battery" indicator on the on the keyboard. Do you mean to say that you see the "low battery" indication on your Samsung Note tablet's screen? That's the only indicator of a low battery condition that specifically states this condition. If that is the case, remember this: you need to charge the FOME keyboard AND your tablet separately, so that they are both fully charged, since charging one will not charge the other. Try this and let me know how this works out for you. Good luck. Hi Zolzaya, I've been using my FOME wireless keyboard regularly for quite a while now with no problems. Your question is confusing me, since there is no "low battery" indicator on the on the keyboard. Do you mean to say that you see the "low battery" indication on your Samsung Note tablet's screen? That's the only indicator of a low battery condition that specifically states this condition. If that is the case, remember this: you need to charge the FOME keyboard AND your tablet separately, so that they are both fully charged, since charging one will not charge the other.... » Read More Hi Zolzaya, I've been using my FOME wireless keyboard regularly for quite a while now with no problems. Your question is confusing me, since there is no "low battery" indicator on the on the keyboard. Do you mean to say that you see the "low battery" indication on your Samsung Note tablet's screen? That's the only indicator of a low battery condition that specifically states this condition. If that is the case, remember this: you need to charge the FOME keyboard AND your tablet separately, so that they are both fully charged, since charging one will not charge the other. Try this and let me know how this works out for you. Good luck. « Show Less
|
I bought the pink case and I really like it. But the keyboard doesn't work. Even though I charge the keyboard long enough, it says " low battery" so
|
i'd send it back. mine didn't have that problem. I would also push for them to pay for shipping (you'd have to send it to singapore!)
|
I bought the pink case and I really like it. But the keyboard doesn't work. Even though I charge the keyboard long enough, it says " low battery" so
|
Sounds like possibly a faulty battery. Have you tried sticking a straight ion into the little reset hole? Sometimes that works. Also, did you charge it for the recommended time before the first use?
|
is this tall enough to cover quarts? or just pints?
|
I got mine at end of season, so haven't used it. However measures 9 inches from rack in bottom to edge where lid sits. A quart jar is about 6.5 in with lid in place. I am sure this is more than adequate and much better than my old one.
|
Can this produce smooth clean chip-free cuts in plywood & other sheetgoods, & can it be used with a straight edge to keep the cut perfectly straight?
|
You can use a straight edge to guide the saw but it must be quite thin since when the blade is at full cutting depth there is little clearance below the motor housing. The blade that comes with the saw is quite thin and has little set to the teeth, so cuts tend to be pretty clean. However if you plan to rip an 8 ft. sheet of 3/4 inch plywood, you will be disappointed: Not enough power or battery life to work well for an app like that.
|
Can this produce smooth clean chip-free cuts in plywood & other sheetgoods, & can it be used with a straight edge to keep the cut perfectly straight?
|
I expect it depends on the material being cut. The plywood and thin material I have used, it splinters. It cuts a straight line but does not cut as I expected it to do as the ad depicted.
|
Can this produce smooth clean chip-free cuts in plywood & other sheetgoods, & can it be used with a straight edge to keep the cut perfectly straight?
|
The rotation speed is fairly low and you will need to experiment with various blades. The standard blade does chip the edge. There is a finer circular blade but I have not used it yet. The cuts I make have not needed a perfectly chip-frre cut, and I just round the edge with sand paper. I have used it against a straight edge. You have to watch it through, because it will wonder away from the ruler it you do not put the appropriate pressure. Positioning the edge (I use a long level) requires some inventiveness.
|
Can this produce smooth clean chip-free cuts in plywood & other sheetgoods, & can it be used with a straight edge to keep the cut perfectly straight?
|
The saw has a foot which can be used with a straight edge clamped to the wood to produce a straight cut. A trick I was taught for preventing splintering with plywood is to clamp another piece of wood under the plywood. I am guessing the splintering occurs with plywood layers not having enough support.
|
Can this produce smooth clean chip-free cuts in plywood & other sheetgoods, & can it be used with a straight edge to keep the cut perfectly straight?
|
we mainly use it for trim.it will make a nice cut with a straight edge.i haven't experimented a lot with it
|
Can this produce smooth clean chip-free cuts in plywood & other sheetgoods, & can it be used with a straight edge to keep the cut perfectly straight?
|
I would think that it would depend on the blade that was being used, as far as chip-free cuts. I have not used it in that fashion. I think it would be very important to keep it fully charged as well so that the blade doesn't stall. As far as strait cuts with a straight edge it would follow the straight edge fine.
|
Can this produce smooth clean chip-free cuts in plywood & other sheetgoods, & can it be used with a straight edge to keep the cut perfectly straight?
|
Sir! I used this little machine in solid pine and 1/4" plywood where the cut quality did not matter. Seems to be cutting ok., but you might need to change the blade to get better cut, such as more tooth on the blade.
|
Can this produce smooth clean chip-free cuts in plywood & other sheetgoods, & can it be used with a straight edge to keep the cut perfectly straight?
|
Yes, you can make clean cuts depending on the blade you're using and it's condition as well as cut straight lines using a guide (straight edge). The problem with this tool is it overheats the battery quickly draining it. So you've only got about 3-6 minutes of cutting. Love this tool but HATE that it doesn't run longer.
|
is this the same fitment with the hero 3?
|
I broke the latch the housing for my Hero 3 and bought this Hero 3+ housing to replace it. The Hero 3 fits perfectly in this Hero 3+ housing. The good thing about the newer housing is that the latch is less like to break as it is sturdier.
|
Has anyone actually had positive results with this product?
|
I was diagnosed with low-T and placed on a prescription testosterone medication by my doctor. Over the course of nearly two years, the dosage was increased steadily to get my levels up into the "normal" range. When my health insurance provider notified me that they would only pay for a lower dosage (the medication is quite expensive), I thought I would give this product a try. At my next appointment, blood tests showed that my levels were finally back into the "normal" range and my prescription dosage lowered to a third of what I had been using. After several months, my levels remain in the "normal" range. This may have been coincidence, but I have continued to take this product. I was diagnosed with low-T and placed on a prescription testosterone medication by my doctor. Over the course of nearly two years, the dosage was increased steadily to get my levels up into the "normal" range. When my health insurance provider notified me that they would only pay for a lower dosage (the medication is quite expensive), I thought I would give this product a try. At my next appointment, blood tests showed that my levels were finally back into the "normal" range and my prescription dosage lowered to a third of what I had been using. After several months, my... » Read More I was diagnosed with low-T and placed on a prescription testosterone medication by my doctor. Over the course of nearly two years, the dosage was increased steadily to get my levels up into the "normal" range. When my health insurance provider notified me that they would only pay for a lower dosage (the medication is quite expensive), I thought I would give this product a try. At my next appointment, blood tests showed that my levels were finally back into the "normal" range and my prescription dosage lowered to a third of what I had been using. After several months, my levels remain in the "normal" range. This may have been coincidence, but I have continued to take this product. « Show Less
|
Has anyone actually had positive results with this product?
|
Yes, I noticed positive results almost right away. I have been working on balancing my hormones through exercise and supplements for about 6 months and this product was the final missing link. My blood work also improved reflecting lowering levels of SHBG which had been stubborn and extremely elevated. Hope this helps !
|
I generally only have to shave every other day unless I'm working then everyday just bought the Merkur 23C/180. How long does each blade last?
|
I generally use a blade 3-4 times. But I was thinking of changing them after every time I shave just because the blades are $11 and some change for a 100. It gives a great shave just have to get used to it.
|
I generally only have to shave every other day unless I'm working then everyday just bought the Merkur 23C/180. How long does each blade last?
|
I bought these for my husband who loves them. He has a heavy beard and shaves every day. He says he changes them once a week as a rule, but gets a close shave even on day 7.
|
How much are the ants?
|
I ordered 2 batches of ants since i heard a lot die in shipment. I added food and the ice pack since it said they can take a long time in shipment. The food was not with the ants and the ice pack was needed. Total was $40 for just the ants (with shipping) and I ended up with 22 live ants.
|
How much are the ants?
|
There are lots of websites that sell the live ants. You can use antsalive.com or sciencekits.com as a good starting point. They're between $4 - $5 including shipping. If you're feeling really frugal, you can search for coupon codes for those sites, and sometimes you'll save 10% or so.
|
Is this left hand???
|
This is a right hand instrument. It might look a little like a left handed because of the way the picture was taken. The pick guard would be on the other side for a left handed model. If you're interested in a left hand model Fender acoustic, try this ASIN: B004ISK4D8 Happy Holidays, Your Friends at EZPICKN
|
The description says water resistant. Is it submersible?
|
When washing the device off under running water, yes the unit is sealed, however, there are two small vent holes, just behind the power button which should be covered with your thumb. As for your question, the scanning/detector part of the device can only be submersed in water which is about 4 inches. The entire unit should not go with you to the bottom of the river, lake, ocean, or swimming pool. The device meets IEC 60529 IP 66 dust and water resistance standards. Hopefully that answers you question. If the area in question is bigger than a normal size puddle or pothole just scoop out what you need to scan, place the material in a bucket with some water and power-up the detector... When washing the device off under running water, yes the unit is sealed, however, there are two small vent holes, just behind the power button which should be covered with your thumb. As for your question, the scanning/detector part of the device can only be submersed in water which is about 4 inches. The entire unit should not go with you to the bottom of the river, lake, ocean, or swimming pool. The device meets IEC 60529 IP 66 dust and water resistance standards. Hopefully that answers you question. If the area in question is bigger than a normal size puddle or pothole just scoop out... » Read More When washing the device off under running water, yes the unit is sealed, however, there are two small vent holes, just behind the power button which should be covered with your thumb. As for your question, the scanning/detector part of the device can only be submersed in water which is about 4 inches. The entire unit should not go with you to the bottom of the river, lake, ocean, or swimming pool. The device meets IEC 60529 IP 66 dust and water resistance standards. Hopefully that answers you question. If the area in question is bigger than a normal size puddle or pothole just scoop out what you need to scan, place the material in a bucket with some water and power-up the detector... « Show Less
|
The description says water resistant. Is it submersible?
|
as to my knowledge. It takes batteries and I don't think it would be submersible. If it was I think it would say more like water proof.
|
The description says water resistant. Is it submersible?
|
To a point. You can modify it with same silicone and make it more water resistant otherwise it says you can rinse it off and it will be fine. So a quick dip in the water without the modification.
|
The description says water resistant. Is it submersible?
|
The instructions say you can rinse it off but the battery case and the speaker hole are vulnerable. They recommend you NOT submerge it.
|
does this pump work for blow up pools?
|
I would say yes but it probably depends on the size of the pool. I use it to fill a lake reft that's about 10ft by 10ft with no problem.
|
Can this device plug into an ipad or iPhone direct with supporting apps?
|
I'm not sure but think the answer is no. I have plugged it into my Mac book pro. Very low quality video
|
Does the lid lay flat down to the table when opened up"
|
First----answer this: Why would you want it to lay flat on the table anyway? ????? We all are wondering-----what are we missing? What possible advantage would result from the open lid laying flat on the table?
|
Does the lid lay flat down to the table when opened up"
|
No. The lid and box form a 90 degree angle when opened with the clear lid staying in an upright position until you close it. I know some reviewers felt this was a problem or inconvenience, but I actually prefer it this way since I find it more compact and controllable. This is a great storage box.
|
Does the lid lay flat down to the table when opened up"
|
Yes, it lays flat on the table. The lid lifts up on hinges and you can push it out of the way.
|
Are the cushions flip-able? Are the cushion coverings the same on both sides, or is one side definitely the "bottom"?
|
The cushions are not double sided however, the coverings come off very easily and are machine washable. It's a great purchase for the price.
|
Are the cushions flip-able? Are the cushion coverings the same on both sides, or is one side definitely the "bottom"?
|
The cushions are one sided and cannot be flipped over. Also, the cushions are all interchangeable except for the ones in the corner.
|
I notice some people say they leave the skewer on for normal ride, has anyone has left it on and do often long rides 50+ miles, and it is still good?
|
I try not to leave it on when I am doing road rides. However I haven't had an issue with it after 2-3 90+ mile weeks
|
I notice some people say they leave the skewer on for normal ride, has anyone has left it on and do often long rides 50+ miles, and it is still good?
|
I've put about 100 miles or so on the bike that has this skewer, but never rode over 20 at one time. That said, I can't imagine why it wouldn't hold up over a 50-mile ride.
|
I notice some people say they leave the skewer on for normal ride, has anyone has left it on and do often long rides 50+ miles, and it is still good?
|
While it is probably heavier than the skewer that's on your bike now they're exactly the same when it comes to the function they perform. The only real reason I can think for swapping them out would be if you're gram counting or need the extra bling.
|
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.