Datasets:
sentence-transformers
/
amazon-qa

Dataset card Data Studio Files
xet
Community
query
stringlengths
20
2.05k
answer
stringlengths
75
2.05k
does it burn dual layer Blu-Rays?
Yes, it writes bd disk very well. Just don't try to later read them. The drive needs a firmware update from LG to fix read issues (ver 1.02-A0) and Buffalo does not support updates check their website before you buy! I can't read a year old 48gig backup.
does it burn dual layer Blu-Rays?
The fact that it supports BDXL means it will burn two layer Blu-Rays AND triple AND quad layer Blu-Rays (each of which holds increasing amounts of data). This player also supports burning DVD and Blu-Ray M-Disks which are stated to be archival and support data storage very long term under adverse conditions.
does it fit on a honda crv, 2004 with a rear spare tire holder
Here's the link to their website: http://hollywoodracks.com/FitGuide/honda.htmLooks like it does not. Huh? :( You would need a hitch mounted rack or a spare tire mounted one...hope this helps you out/.
does it fit on a honda crv, 2004 with a rear spare tire holder
Probably not. It's constructed for a sedan trunk and not an SUV. You'll probably want to get a rack that is built for a bumper installation.
Black ink gone after one month? I have only used this printer for one month and have printed maybe 75 sheets of mostly text. I'm already getting the "replace ink cartridge" message for the black cartridge. That seems awfully quick. Has anyone else had their ink disappear so quickly??Is there any way to get around the "replace ink cartridge" message that comes up that will not allow you to print? The last printout I did was just fine -- I'm sure I can print out a few more to get the last bit of black ink out and used. It seems like a waste to not be able to print to get the most out of the cartridge until it just can't get anymore black out. Gotta stretch everything a bit more these days ya know. Is this how Epson forces customers to replace ink cartridges more frequently? If so, I'm never going to buy an Epson again for this reason. Black ink gone after one month? I have only used this printer for one month and have printed maybe 75 sheets of mostly text. I'm already getting the "replace ink cartridge" message... » Read More Black ink gone after one month? I have only used this printer for one month and have printed maybe 75 sheets of mostly text. I'm already getting the "replace ink cartridge" message for the black cartridge. That seems awfully quick. Has anyone else had their ink disappear so quickly??Is there any way to get around the "replace ink cartridge" message that comes up that will not allow you to print? The last printout I did was just fine -- I'm sure I can print out a few more to get the last bit of black ink out and used. It seems like a waste to not be able to print to get the most out of the cartridge until it just can't get anymore black out. Gotta stretch everything a bit more these days ya know. Is this how Epson forces customers to replace ink cartridges more frequently? If so, I'm never going to buy an Epson again for this reason. « Show Less
Staples will still recycle the old cartridges. I agree, the major shortcoming with this printer is how quickly it goes through ink cartridges and the inability to print in black or grayscale when one of the colors runs out.
Black ink gone after one month? I have only used this printer for one month and have printed maybe 75 sheets of mostly text. I'm already getting the "replace ink cartridge" message for the black cartridge. That seems awfully quick. Has anyone else had their ink disappear so quickly??Is there any way to get around the "replace ink cartridge" message that comes up that will not allow you to print? The last printout I did was just fine -- I'm sure I can print out a few more to get the last bit of black ink out and used. It seems like a waste to not be able to print to get the most out of the cartridge until it just can't get anymore black out. Gotta stretch everything a bit more these days ya know. Is this how Epson forces customers to replace ink cartridges more frequently? If so, I'm never going to buy an Epson again for this reason. Black ink gone after one month? I have only used this printer for one month and have printed maybe 75 sheets of mostly text. I'm already getting the "replace ink cartridge" message... » Read More Black ink gone after one month? I have only used this printer for one month and have printed maybe 75 sheets of mostly text. I'm already getting the "replace ink cartridge" message for the black cartridge. That seems awfully quick. Has anyone else had their ink disappear so quickly??Is there any way to get around the "replace ink cartridge" message that comes up that will not allow you to print? The last printout I did was just fine -- I'm sure I can print out a few more to get the last bit of black ink out and used. It seems like a waste to not be able to print to get the most out of the cartridge until it just can't get anymore black out. Gotta stretch everything a bit more these days ya know. Is this how Epson forces customers to replace ink cartridges more frequently? If so, I'm never going to buy an Epson again for this reason. « Show Less
The inability to print something when any of the color cartridges is empty may be a difficulty with many (most? all?) color printers these days. I know in the past when one color ran out, I would still be able print something that just used black ink, but that's not possible with my current color ink jet printer (a Brother all-in-one). I do very little color printing, and I find it cheaper though space-consuming to own two printers, the color inkjet and a laser printer for documents that only require black ink.
Black ink gone after one month? I have only used this printer for one month and have printed maybe 75 sheets of mostly text. I'm already getting the "replace ink cartridge" message for the black cartridge. That seems awfully quick. Has anyone else had their ink disappear so quickly??Is there any way to get around the "replace ink cartridge" message that comes up that will not allow you to print? The last printout I did was just fine -- I'm sure I can print out a few more to get the last bit of black ink out and used. It seems like a waste to not be able to print to get the most out of the cartridge until it just can't get anymore black out. Gotta stretch everything a bit more these days ya know. Is this how Epson forces customers to replace ink cartridges more frequently? If so, I'm never going to buy an Epson again for this reason. Black ink gone after one month? I have only used this printer for one month and have printed maybe 75 sheets of mostly text. I'm already getting the "replace ink cartridge" message... » Read More Black ink gone after one month? I have only used this printer for one month and have printed maybe 75 sheets of mostly text. I'm already getting the "replace ink cartridge" message for the black cartridge. That seems awfully quick. Has anyone else had their ink disappear so quickly??Is there any way to get around the "replace ink cartridge" message that comes up that will not allow you to print? The last printout I did was just fine -- I'm sure I can print out a few more to get the last bit of black ink out and used. It seems like a waste to not be able to print to get the most out of the cartridge until it just can't get anymore black out. Gotta stretch everything a bit more these days ya know. Is this how Epson forces customers to replace ink cartridges more frequently? If so, I'm never going to buy an Epson again for this reason. « Show Less
I have an older Epson and was wanting to replace it for that very reason. I can't print anything when any color is out. So it says I need to replace the light blue and won't let me print anything until I do. Since I never use color, I'm guessing the blue just dried out. At any rate, I can't figure how to override that and just use black. Maybe it is just an Epson thing, as you said, to get us to buy more ink. I'm with you, I want to keep going until the ink fades and I can really see it is almost out.
Black ink gone after one month? I have only used this printer for one month and have printed maybe 75 sheets of mostly text. I'm already getting the "replace ink cartridge" message for the black cartridge. That seems awfully quick. Has anyone else had their ink disappear so quickly??Is there any way to get around the "replace ink cartridge" message that comes up that will not allow you to print? The last printout I did was just fine -- I'm sure I can print out a few more to get the last bit of black ink out and used. It seems like a waste to not be able to print to get the most out of the cartridge until it just can't get anymore black out. Gotta stretch everything a bit more these days ya know. Is this how Epson forces customers to replace ink cartridges more frequently? If so, I'm never going to buy an Epson again for this reason. Black ink gone after one month? I have only used this printer for one month and have printed maybe 75 sheets of mostly text. I'm already getting the "replace ink cartridge" message... » Read More Black ink gone after one month? I have only used this printer for one month and have printed maybe 75 sheets of mostly text. I'm already getting the "replace ink cartridge" message for the black cartridge. That seems awfully quick. Has anyone else had their ink disappear so quickly??Is there any way to get around the "replace ink cartridge" message that comes up that will not allow you to print? The last printout I did was just fine -- I'm sure I can print out a few more to get the last bit of black ink out and used. It seems like a waste to not be able to print to get the most out of the cartridge until it just can't get anymore black out. Gotta stretch everything a bit more these days ya know. Is this how Epson forces customers to replace ink cartridges more frequently? If so, I'm never going to buy an Epson again for this reason. « Show Less
Mine kept printing for awhile after I got the "replace ink" message. Also, it is my understanding that the ink cartridges that come with the printer are generally sample cartidges and do not contain as much ink as the full, replacement cartridges. While that seems kind of crummy, I think most companies that supply cartridges with the newprinter are doing that. When I was shopping for this printer, I was suprised to find that many companies have stopped including any ink with their new printers!!
Black ink gone after one month? I have only used this printer for one month and have printed maybe 75 sheets of mostly text. I'm already getting the "replace ink cartridge" message for the black cartridge. That seems awfully quick. Has anyone else had their ink disappear so quickly??Is there any way to get around the "replace ink cartridge" message that comes up that will not allow you to print? The last printout I did was just fine -- I'm sure I can print out a few more to get the last bit of black ink out and used. It seems like a waste to not be able to print to get the most out of the cartridge until it just can't get anymore black out. Gotta stretch everything a bit more these days ya know. Is this how Epson forces customers to replace ink cartridges more frequently? If so, I'm never going to buy an Epson again for this reason. Black ink gone after one month? I have only used this printer for one month and have printed maybe 75 sheets of mostly text. I'm already getting the "replace ink cartridge" message... » Read More Black ink gone after one month? I have only used this printer for one month and have printed maybe 75 sheets of mostly text. I'm already getting the "replace ink cartridge" message for the black cartridge. That seems awfully quick. Has anyone else had their ink disappear so quickly??Is there any way to get around the "replace ink cartridge" message that comes up that will not allow you to print? The last printout I did was just fine -- I'm sure I can print out a few more to get the last bit of black ink out and used. It seems like a waste to not be able to print to get the most out of the cartridge until it just can't get anymore black out. Gotta stretch everything a bit more these days ya know. Is this how Epson forces customers to replace ink cartridges more frequently? If so, I'm never going to buy an Epson again for this reason. « Show Less
I contacted Epson and they advise that it is impossible to print in black only when one of the colors is empty. For me, that is a major shortcoming and one that was not explained to me when I purchased the Artisan 810. In addition, the cost of replacement ink is very high...it may be more costly than any other brand. At office stores such as Office Max, you cannot recycle the used Epson cartridges as you can do with HP for a discount. Generally, a decent printer however, it has a few significant flaws
Is this good for men over 6ft 3 and 210 lbs
I'm 6ft, 250 lbs and it is sized alright if a little bit low for mount/dismount. There's several inches of available travel left on the rail at the end of my stroke, so I expect it'll be long enough for that height. Seat is a bit small.
Is this good for men over 6ft 3 and 210 lbs
My husband is 6ft 4in and weighs around 225 and he hasn't had any issues with it.
Is this good for men over 6ft 3 and 210 lbs
I would say no. I row on a Concept 2 at the gym often. This thing isn't even in the ball park with that. I am 5'9" 190lbs and feel to big for it. You get what you pay for typically and this is no exception. In a pinch on a rainy day it will suffice.
Can this be used on 240V 60hz?
I'm thinking no, I can't find the instructions, but the the plug is a std 120 volt household type. I can tell you one thing, It's not easy to program for irregular settings
I wonder what is this product's lot expiration date if I order it this time?
Not certain-- the actual jar does not have an expiration date on it, however, the outside packaging I discarded may have had it. Great coffee! I have been using this occasionally for 1 1/2 years and it it still fresh.
I wonder what is this product's lot expiration date if I order it this time?
The expiration date is printed at the bottom of each jar. The most current shipment we received expires in Sep 2015 but we'll go through it by then.
I wonder what is this product's lot expiration date if I order it this time?
I drank mine 2 years out of date and it didn't taste any different than a brand new jar. Keep the lid on it sealed tight, store it in a dry area and it should last years, literally.
My daughter is 5 1/2 and swim lessons require that she wear a diaper. She weighs 46 lbs. What size should I get?
My daughter is 13mo and is 32 inches and 22lbs and we had to get her x-large (says 28-33lbs on size chart). The 4t looks like it goes up to 45 but i found this brand runs small. Buy and try i guess.
Will this net fit over the 1.5" diameter safety poles I already have?
I bought the safety net to replace the Spartan one that was ripping. To my surprize it fitted quite well, specially on the poles, which was where I thought it might not work. I think my poles are about 1.5" diameter.
hi! We just got a Garden Treasures PG167H-A patio gas heater, it has a round top but a 20x20 square base. Will this cover fit? Thanks!
I also have a 20x20 base and it fits perfectly.Again I will,say this is the best cover I have ever bought.
hi! We just got a Garden Treasures PG167H-A patio gas heater, it has a round top but a 20x20 square base. Will this cover fit? Thanks!
I also have a 20x20 base and it fits perfectly. Again I will,say this is the best cover I have ever bought.
does it have folding peddles?
This is the second bike In less than a year ... my wife love it and I had to buy another one ... and as answer to you : Yes it does!!!
does it come with a mount and cord?
Unless it is stolen ! Don't be so lazy, what does the literature have to say about a mount and cord.
does it come with a mount and cord?
Yes. It comes with both. I purchased a seep rat mount with a large suction cup with a latch.
is it come with the filler?
I don't believe it did but you can punch a small hole in the bottle top and use any needle nose filler. I found these items to be a real good deal, considering the other inkjet cartridges on the market or in the stores. I used these ink for two times since I bought the product and it Works great. Cheers
I'm 6'2" and 290lbs. Will these hold up for me with medium use?
Height is not a problem, they adjust for a great range to 6'4" - they are rated to 300 lbs - they are the BEST crutches and far exceed the "hospital" crutches. They are comfortable and flexible. Definitely worth it, very easy on the underarms with the springs.
I'm 6'2" and 290lbs. Will these hold up for me with medium use?
I'm 280 and have used these for two.plus yrs. There is nothing like them. They are sooooo comfortable.you can't go wrong unless of course you buy the the old wood kind.
I'm 6'2" and 290lbs. Will these hold up for me with medium use?
Absolutely! The height is adjustable. Hubbie is 6' and we still had plenty of options to adjust. Since your weight is used mainly on your hands instead of under your arms it's easy to find the position that fits you best. Good luck!
I'm 6'2" and 290lbs. Will these hold up for me with medium use?
These will hold up. I used my first pair exclusively for 3 months or so then back to my usual use of around the house when I'm not wearing my prosthesis. I'm 6', 230 lbs. I would highly recommend these crutches. Get them set properly and they are great and hold up very well.
I'm 6'2" and 290lbs. Will these hold up for me with medium use?
I am quite a bit smaller then you but according to maximum height and weight limits, you should be fine with the mobilegs. I have used them daily for 8 weeks and am amazed at the comfort, would not trade for any other crutches. Good luck
how much weight will it carry?
Not totally sure. My cat is 14# and had no trouble. It's just like a baby stroller. 20-25# if the length was under 19" there is head room for Sunshine to have a full sit up position and she is 16" long. This will not collapse. Just wonder about enough head room.
how much weight will it carry?
My cats each weigh about 15 or so pounds.I take them separately for their vet appointments. I did read a review saying the stroller can handle 25lbs but it is true i couldn't find a weight mentioned in product description. having the cup holder helps keep this stroller sturdy. I've had no issues using it. The vet's office is about a mile and a quarter from my home.
how much weight will it carry?
my kitty is about 15lbs and it can hold a lot more than him. I bet I could get both of my kitties in there if the other one was not afraid to go out side. I hope that this has helped you. We love the stroller and so does our cat.
how much weight will it carry?
I've read that the stroller will hold 20-25 lbs. My Maltese weighs between 7-8 lbs, and obviously has lots of room in the stroller. I have put 2 dogs in the stroller at once , but together they weighed about 16 lbs. I'd feel comfortable around 20 lbs. just to be on the safe side.
how much weight will it carry?
I think up to 20. My kitty is 13 lbs and don't seem to have any issues. It's really sturdy!
how much weight will it carry?
Depending on how the weight is distributed, I would feel comfortable around 25 pounds. The design is identical to a baby stroller. If your pet would fit inside, you shouldn't have any issue. My Bichion was a little crowded in the stroller, but weight was no issue (20 lbs)
how much weight will it carry?
My dog weight 20-22lbs and using this stroller 3-5 days out of the week to walk about 10-15 blocks,it lasted ne maybe a litte over one month.The bars are hollow,made out of aluminum,so its not so sturdy.
What are the voices?
Two acoustic pianos, two electric pianos, two organs (jazz & church), two or three strings (sorry, it's currently where I can't get to it easily), two basses (electric & acoustic), clavinet, harpsichord, maybe one or two I'm forgetting. Not a lot, but solid samples.
What are the voices?
The sounds are as described by the last answerer. There are not that many, but you can mix any two of them at once (and split the keyboard additionally) to get some good layered sounds. You can also alter the ambience and reverb to further refine the sounds. All sounds are good, the pianos (which is really what most of use the keyboard for) are quite good. The lack of choices of sounds is a positive aspect in my opinion. You turn it on and just start to play, as opposed to fiddling with a hundred settings, as I find myself doing on my Motif XF. If you need more sounds, the unit has Midi USB and DIN functionality, so the sonic possibilities are endless as a midi controller. The sounds are as described by the last answerer. There are not that many, but you can mix any two of them at once (and split the keyboard additionally) to get some good layered sounds. You can also alter the ambience and reverb to further refine the sounds. All sounds are good, the pianos (which is really what most of use the keyboard for) are quite good. The lack of choices of sounds is a positive aspect in my opinion. You turn it on and just start to play, as opposed to fiddling with a hundred settings, as I find myself doing on my Motif XF. If you need more sounds, the unit has Midi USB... » Read More The sounds are as described by the last answerer. There are not that many, but you can mix any two of them at once (and split the keyboard additionally) to get some good layered sounds. You can also alter the ambience and reverb to further refine the sounds. All sounds are good, the pianos (which is really what most of use the keyboard for) are quite good. The lack of choices of sounds is a positive aspect in my opinion. You turn it on and just start to play, as opposed to fiddling with a hundred settings, as I find myself doing on my Motif XF. If you need more sounds, the unit has Midi USB and DIN functionality, so the sonic possibilities are endless as a midi controller. « Show Less
What is the silver button on the back side for?
The Silver button on the back when pressed will bring up the screen and also tell you to unlock using the side key.Hope this helps you.
What is the silver button on the back side for?
The button on the back will flash your phone number on the screen. It's kind of a dandy feature, helps some of us low tech seniors from stumbling to access our own number.
Is this the AFXZA model?
I don't think so, Talia - it does not include that designation in the model number. If it is, it is a capability I have not discovered or investigated.
Will a 75mm tripod head leveler work with this bowl? It says the bowl is for 70mm/10mm. Can't find it any smaller.
Wow. five "answers", not one answered. I would like to know too. There is a bowl attachment that takes 70mm/10mm (whatever that fraction means). We're trying to figure out if that bowl will except a 75mm bowl head like the Ravelli. Anyone?
Will a 75mm tripod head leveler work with this bowl? It says the bowl is for 70mm/10mm. Can't find it any smaller.
I really don't know. I thought 75mm was the standard. Are you sure you read that right? Anyway I hope you know it does come with its own bowl. I still think 75mm is the standard
Will a 75mm tripod head leveler work with this bowl? It says the bowl is for 70mm/10mm. Can't find it any smaller.
I use it with a sony hdv 24k film camera it should be ok... for the price you cant beat it! I also have a 4K Kessler Crane system too!
I have DVD player/satellite receiver and use HDMI to connect to TV.If I connect to a sound bar, there will be no video feed to TV.How do I fix that?
i connected all of my hdmi devices to the sound bar including the TV which is plugged in to hdmi 1; i also used the digital audio out (optical) connex. All sound/video feeds through just fine. I just switch the input to hdmi port (hdmi 1 for tv, hdmi 2 for dvd/blu ray, hdmi 3 for roku).
I have DVD player/satellite receiver and use HDMI to connect to TV.If I connect to a sound bar, there will be no video feed to TV.How do I fix that?
If you are using an HDMI it provides Audio and Video. So you can HDMI your dvd player to the sound bar in one of the three slots provided and then use an HDMI cord from the sound bar to the TV. If it isn't working make sure your TV has ARC and go thru the menu options in the sound bar and turn on HDMI pass through. Hope this helps!
I have DVD player/satellite receiver and use HDMI to connect to TV.If I connect to a sound bar, there will be no video feed to TV.How do I fix that?
HDMI carries both Video and Sound. The sound bar works like an AV Home Theater Reciever, in a limited way. HDMI makes this very simple. I have three devices, CableTV/DVR box, Apple TV and BlueRay. All of the HDMI for these devices plug into the sound bar IN; 1,2 & 3. Then the HDMI OUT from the Sony Sound Bar plugs into the TV HDMI IN ONE. I leave the TV on the HDMI ONE, the sound bar, and then adjust the input on the sound bar to the source I want and volume on the sound bar. Works like a champ and it is a clean install with just the one cable to the TV. You can use more devices if your TV supports Optical, for best quality, or RCA out. That can be routend to the sound bar and the you can plug more devices into your TV too.
I have DVD player/satellite receiver and use HDMI to connect to TV.If I connect to a sound bar, there will be no video feed to TV.How do I fix that?
The sound bar has to be on the correct input to get the video feed. Try changing that to whatever hdmi u have it hooked up to.
Is this temporary? I cannot "glue" anything to my (rental) apartment walls. I am considering the roses one for my entry door (will it "stick" there?) and the other for my bedroom wall. Thanks. Is this temporary? I cannot "glue" anything to my (rental) apartment walls. I am considering the roses one for my entry door (will it "stick" there?) and the other for my... » Read More Is this temporary? I cannot "glue" anything to my (rental) apartment walls. I am considering the roses one for my entry door (will it "stick" there?) and the other for my bedroom wall. Thanks. « Show Less
Yes they will stick. They are pealable stickers. Ny that they meen 1 time though. You can put them up and take them down when ever you feel like it but im pretty sure they will not be sticky enough to put ip a second time
Is this temporary? I cannot "glue" anything to my (rental) apartment walls. I am considering the roses one for my entry door (will it "stick" there?) and the other for my bedroom wall. Thanks. Is this temporary? I cannot "glue" anything to my (rental) apartment walls. I am considering the roses one for my entry door (will it "stick" there?) and the other for my... » Read More Is this temporary? I cannot "glue" anything to my (rental) apartment walls. I am considering the roses one for my entry door (will it "stick" there?) and the other for my bedroom wall. Thanks. « Show Less
They are decals, that stick to your wall and can be peeled off; leaving no marks behind. There are many pieces and each has to be cut out and put on individually. I also reccomend that when you get it ;that you put it under a rug in your apartment that gets a lot of foot trafic on it. It helps to flatten out the decal sheet. Have a friend help you cut it and put it up. It will be easier than doing it yourself.
hello my friend... sending to Brazil?
Thank you for your question. We do not offer international shipping through Amazon.
How sturdy is the cart ? Any bending or twisting of the frame ? What is the weight limitation ?
We have used the cart for 1 year. It is light and very easy to move. We have noticed no bending or warping of the frame. It is kept inside our garage.
How sturdy is the cart ? Any bending or twisting of the frame ? What is the weight limitation ?
I've owned 3 recycling carts...this is the most sturdy yet. The front 2 wheels help navigate in tight garage spaces as well.
How sturdy is the cart ? Any bending or twisting of the frame ? What is the weight limitation ?
Very sturdy, no bending or twisting, worked well when I was disposing of boxes after my recent move. I highly recommend it.
How sturdy is the cart ? Any bending or twisting of the frame ? What is the weight limitation ?
We have used this sturdy cart for over a year and our recycling bins are always full. There have been no problems and it is very easy to push/pull.
Will it continue to charge from the solar panel while it is charging from the wall ??
I can't tell that it charges from solar at all. It is advertised and sold as 30,000mah but when it was received, it is 10,000mah. It does not chage my phone or my Ipad. I will be returning it. But, to answer your question, I do not know if it charges both ways simultaneously, because the instructions are so poor, in gibberish English.
ingredients: is there anywhere were there is a list of indgredients?
Found the ingredients on the manufacture's website. It does include artificial sweeteners (sucralose) and trans fat (partially hydrogenated vegetable oil). Ingredient Statement: Sugar, Glucose Syrup Solids, Cocoa (processed with alkali), Partially Hydrogenated Vegetable Oil (may contain coconut, soybean, sunflower, palm and/or canola), Nonfat Dry Milk, Modified Whey, Maltodextrin, Salt, Natural and Artificial Flavors, Cellulose Gum, Sodium Caseinate, Cornstarch, Lactose, Dipotassium Phosphate, Sucralose, Mono- and Diglycerides, Silicon Dioxide, Soy Lecithin, Artificial Color.
can the fan be used without the light kit ?
Yes it can, but the reason you would buy this fan is for the energy saving light it comes with. LED, that is. I used to sell Hunter fans and I would suggest looking for a different model, as the Eco-Air comes with the light kit. You could probably save alot of coin by finding one without the kit. Having said that, I absolutely love the fan for its efficiency and its style.
can the fan be used without the light kit ?
Fan can be used without light kit. It would not look finished though. If you dont want the light, only the fan, I would second what Bruce B. said... Look for a different model and save some money.
can the fan be used without the light kit ?
Yes you can. It is double-wired with one switch for the light and one for the fan. I don't know if a cap comes with it if you didn't want the light, though. Hope this helps! The light that it come with is an LED so it doesn't use much power at all...
I'd be a first time user: Do you drop these into the pond, to sink with soil and seeds to the bottom? Thank you (and sorry for the silly question).
it is quite large and i would fill with soil and and use plants the are already started and submerge the tub to the right depth for the chosen plants. also cover the top of the soil with small stones or gravel to keep the soil from floating away.
I'd be a first time user: Do you drop these into the pond, to sink with soil and seeds to the bottom? Thank you (and sorry for the silly question).
Fill it with heavy "garden soil" not potting soil, to keep it from floating out when the tub is in the pond. Top the soil with a layer of sand or gravel to further aid in keeping the dirt down as well a looking neat from above. Wet it well to reduce air bubbles, then sink it to the depth your plants require. I've never grown a water plant from seed, just roots (water lilies/iris/mallow) or young plants so I can't speak to the seed issue. Good luck!
I'd be a first time user: Do you drop these into the pond, to sink with soil and seeds to the bottom? Thank you (and sorry for the silly question).
Thank you so much for taking the time to answer my question! This is precious information--exactly what I needed to know. I immensely appreciate it. Thank you!
I'd be a first time user: Do you drop these into the pond, to sink with soil and seeds to the bottom? Thank you (and sorry for the silly question).
Sorry I can't help you. I actually bought it because it was the right size I needed for a wash tub.
How thick is the collar, exactly? I ask because I use "rivet" dog tags and I can't put it on if the collar is too thick.
It is slightly less than 1/8 th inch. That is the closest I can measure. I hope this helps.
How thick is the collar, exactly? I ask because I use "rivet" dog tags and I can't put it on if the collar is too thick.
It is one ply, not flimsy,but a nice thickness. I don't use rivets but I don't think it would be a problem. Same as most other collars.
How thick is the collar, exactly? I ask because I use "rivet" dog tags and I can't put it on if the collar is too thick.
It's not flimsy, but it is only one-ply. It seems to be the same thickness of other collars I have of the same material. I don't rivet, but sew in the pup's metal dog license (with an upholstery needle) and that wasn't a problem.
Can I buy an extra battery for it?
The model number for the battery is RM18VN. You can contact MTD directly at 1-800-269-6215.
Do wood or plastic seats have less chance of cracking?
I can't picture this toilet seat cracking... It's plastic and very serviceable
Do wood or plastic seats have less chance of cracking?
The lid seems a little flexible. Although its worth it to have a toilet seat that doesn't stain and keeps that "new" look. Be careful how you clean it, it can scratch. I use disinfectant wipes.
Do wood or plastic seats have less chance of cracking?
This plastic seat is great -- it's sturdy, doesn't stain and can be slammed by your children again and again and not crack!
Do wood or plastic seats have less chance of cracking?
I have had both, and honestly haven't had any issues with that. I would think if there was a chance cracking, maybe the lid of a plastic if set on by heavier weight
Do wood or plastic seats have less chance of cracking?
This plastic lid is pretty study. I Have stood on it without any problems. Usually wood ones can take more weight, but seem more vulnerable to cleaners (stains, paint is eaten by cleaner, etc)
i'm from Caracas -Venezuela i have a question, this cell phone works in Venezuela? thank you
Hola, soy de Caracas también y estoy buscando un cel liberado para comprar, me gusta este Nokia X3. Desde el momento en que es liberado se supone que le puedes poner el chip de la operadora que tengas y debería funcionar. Suerte a ambos!Gisele
i'm from Caracas -Venezuela i have a question, this cell phone works in Venezuela? thank you
Hola, hasta donde se, ahora todos los celulares GSM vienen con el cable USB para conectarlos a la computadora y bajar los archivos (fotos, videos, musica, archivos de Office) desde aquélla al celular o viceversa. También puedes conectarlo para descargar aplicaciones y juegos desde la pagina de Nokia. Mi teléfono trajo el cargador, cable, audífonos, batería y tarjeta de memoria SD de 2 Gb pero yo luego le compré una de 8 Gb. Todavía lo tengo y no me ha fallado nunca. Lo uso con Movistar. En cuanto al X3 no lo he probado pero todos los Nokia son muy buenos, la eleccción del modelo depende de los gustos y las prioridades para tí. Saludos. Hola, hasta donde se, ahora todos los celulares GSM vienen con el cable USB para conectarlos a la computadora y bajar los archivos (fotos, videos, musica, archivos de Office) desde aquélla al celular o viceversa. También puedes conectarlo para descargar aplicaciones y juegos desde la pagina de Nokia. Mi teléfono trajo el cargador, cable, audífonos, batería y tarjeta de memoria SD de 2 Gb pero yo luego le compré una de 8 Gb. Todavía lo tengo y no me ha fallado nunca. Lo uso con Movistar. En cuanto al X3 no lo he probado pero todos los Nokia son muy buenos, la eleccción del modelo depende de... » Read More Hola, hasta donde se, ahora todos los celulares GSM vienen con el cable USB para conectarlos a la computadora y bajar los archivos (fotos, videos, musica, archivos de Office) desde aquélla al celular o viceversa. También puedes conectarlo para descargar aplicaciones y juegos desde la pagina de Nokia. Mi teléfono trajo el cargador, cable, audífonos, batería y tarjeta de memoria SD de 2 Gb pero yo luego le compré una de 8 Gb. Todavía lo tengo y no me ha fallado nunca. Lo uso con Movistar. En cuanto al X3 no lo he probado pero todos los Nokia son muy buenos, la eleccción del modelo depende de los gustos y las prioridades para tí. Saludos. « Show Less
i'm from Caracas -Venezuela i have a question, this cell phone works in Venezuela? thank you
Hola vivo en Caracas, y me compré hace meses y medio el Nokia 6790 Slide liberado pero no en Amazon sino en otro sitio web nacional (aunque es traido directo de USA). Está liberado para dos operadoras y funciona de maravilla! estoy muy contenta con él. Tiene teclado Qwerty, no es táctil (yo no lo quería tactil), es fácil de navegar entre las funciones, tiene GPS y mapas de Caracas y otras ciudades y un montón de funciones, acepta memoria externa grandes y puedo entrar a mis buzones de correo, twitter, FB, chat, . Te lo recomiendo!
i'm from Caracas -Venezuela i have a question, this cell phone works in Venezuela? thank you
Hola, se puede conectar a una computadora? se pueden descargar los archivos al telefono desde una conexion a computadora? Gracias....
Will it cut laminate? Business cards that have been laminated?
Yes, I have used it for 3mm and 5mm laminate. It does a great job and they look nice and professional. However, I only did it for about 30 or so cards. Perhaps if it is used often in large quantities, it may dull the blade. Great product - I would buy it again!
Is this well made? Do you think it will actually be able to support the camera if the other part fails?
It is indeed well made. My only quibble is the construction of the metal ring. While VERY solid, the screw-down has no way to lock it in place. A possible minor redesign would include a small rubber ring to impede the regular motion of moving your camera back and forth from loosening the screw down. I had ONE episode during a mildly strenuous day hike where the bolt unscrewed during walking. It did NOT drop my camera, though.
Is this well made? Do you think it will actually be able to support the camera if the other part fails?
I don't know yet. I have just attached it to my camera rig and have only been out once. That said, I have a heavy rig - Canon 7D with grip , using my Canon 70-200 L, and it seemed sturdy enough. Won't know for sure until there is a failure, which will probably lead me to test it over a mattress or something like that.
Is this well made? Do you think it will actually be able to support the camera if the other part fails?
I think that it is well made enough to catch a camera if the other part fails. It definitely won't snap immediately if used just as a backup in case the strap fails but I'm sure that if you had a heavy camera hanging from it for a week it would eventually snap. Using this strap though creates a mess of straps and cords. It is kind of annoying in my opinion. I ended up just switching back to a normal camera strap because I didn't like the messy straps and cords created with using this.
Is this well made? Do you think it will actually be able to support the camera if the other part fails?
Mine seems very well made. I would trust it with the weight of my D90 or NEX-6
Is this well made? Do you think it will actually be able to support the camera if the other part fails?
Yes i was surprises how well made it is, I use it on a nikon d600 and it will support it without issues.
Is this well made? Do you think it will actually be able to support the camera if the other part fails?
It will definitely support any camera you put on it. I have a Nikon D800 with a battery grip and this tether holds it with no problem. The build is very solid and strong
What derailed Do I use on a road bike? My bike has Shimano Tiagra GS 8 spd cassette. 12-23t I would like to change to an 11-34t and drop to a 22t sprocket from a 30t crank sprocket. What derailed do I need to make this work to make work. Crank sprocket...
you can probably use the same derailer and just adjust it for the different size, as far as the chain sizes and stuff, I know almost enough to be dangerous when it comes to bike building and repairing, The way I figure it though, your current chain should be right about the correct size for the changes you are looking at making. As the other person responded make sure this will work for your hub, if you have a freehub this will work (you also need the tool to take the keeper off of the hub) if you do not, you would need a freewheel cassette. The difference is the free hub has the ratcheting mechanism in the hub and the freewheel has it in the casssette and the cassette is removed from the hub. I didn't realize there was a difference before I bought this and ended up getting a new rear wheel to go with my brand new cassette.
At 80-90 psi, roughly how loud is it's operation?
I would say you could speak over it fairly easily. . Not as loud s the air compressor that runs it. That's about as close as I can give you
Compatible with the Crucial RAM Amazon recommends? I got this netbook a few days ago and my RAM that I ordered along with it (that Amazon recommends) doesn't seem to fit snugly in the RAM slot. It doesn't seem to go in all the way. Other people have said it works fine in the Acer 1410. Any help would be greatly appreciated. Compatible with the Crucial RAM Amazon recommends? I got this netbook a few days ago and my RAM that I ordered along with it (that Amazon recommends) doesn't seem to fit snugly in the RAM slot.... » Read More Compatible with the Crucial RAM Amazon recommends? I got this netbook a few days ago and my RAM that I ordered along with it (that Amazon recommends) doesn't seem to fit snugly in the RAM slot. It doesn't seem to go in all the way. Other people have said it works fine in the Acer 1410. Any help would be greatly appreciated. « Show Less
Nevermind, I figured it out. I just didn't snap it in hard enough. Thanks anyway.
Compatible with the Crucial RAM Amazon recommends? I got this netbook a few days ago and my RAM that I ordered along with it (that Amazon recommends) doesn't seem to fit snugly in the RAM slot. It doesn't seem to go in all the way. Other people have said it works fine in the Acer 1410. Any help would be greatly appreciated. Compatible with the Crucial RAM Amazon recommends? I got this netbook a few days ago and my RAM that I ordered along with it (that Amazon recommends) doesn't seem to fit snugly in the RAM slot.... » Read More Compatible with the Crucial RAM Amazon recommends? I got this netbook a few days ago and my RAM that I ordered along with it (that Amazon recommends) doesn't seem to fit snugly in the RAM slot. It doesn't seem to go in all the way. Other people have said it works fine in the Acer 1410. Any help would be greatly appreciated. « Show Less
Did your laptop recognize the added memory immediately or some tricks are needed?
Compatible with the Crucial RAM Amazon recommends? I got this netbook a few days ago and my RAM that I ordered along with it (that Amazon recommends) doesn't seem to fit snugly in the RAM slot. It doesn't seem to go in all the way. Other people have said it works fine in the Acer 1410. Any help would be greatly appreciated. Compatible with the Crucial RAM Amazon recommends? I got this netbook a few days ago and my RAM that I ordered along with it (that Amazon recommends) doesn't seem to fit snugly in the RAM slot.... » Read More Compatible with the Crucial RAM Amazon recommends? I got this netbook a few days ago and my RAM that I ordered along with it (that Amazon recommends) doesn't seem to fit snugly in the RAM slot. It doesn't seem to go in all the way. Other people have said it works fine in the Acer 1410. Any help would be greatly appreciated. « Show Less
Are you 100% sure you're putting it in "in the right direction"? It only goes in 1 way.
Is Sands Alive gluten free?
The website says its 100% organic, hypoallergenic and gluten free. Just be aware that this stuff is super messy. I wont buy it again.
how do sizes run? need for 16 shoe
I am a women's 8 and it fits perfectly. There's a lot of room for stretch but 16 may be too much of a stretch
Can I put this on a sleeper sofa and not damage it while it is stored away?
My husband and I have stored these successfully in the past. They always bounce right back. Whether or not there is a limit on the number of times you can do this, I don't know. I would also wonder about the length of the storage time. We don't store ours for very long periods because they are constantly in use.
Can I put this on a sleeper sofa and not damage it while it is stored away?
As a happy owner of this mattress, I can say that we sit every night on the head of the bed to watch TV, yet the mattress bounces right back when we move to sleep position. Would feel confident that your sleeper mattress would bounce back when opened. Enjoy!
i want to buy it for my dad . will it fit for unlock phone
To my knowledge, this specific case model will only fit *Sprint LG Optimus 'G' Model LS970* As I have been told that any other carrier (ATT)'s is slightly smaller and wont fit this specific case. "It is a very nice, dependable, rugged 2 piece case w/stand.. I am very happy with it" There are other cases by this same 'JKASE' that might be what you are looking for, but I would suggest a 2 piece for good protection. :) GOOD DAY
i want to buy it for my dad . will it fit for unlock phone
it should what kind of phone is it it being unlocked shouldn't have anything to do with it
Biggest difference from regular cordless speaker phone?
Huge difference, Thomas. This phone, when held close to a hearing aid with T-coil, will transmit to both hearing aids simultaneously. This increases understanding geometrically. Without hearing aids, the phone can also be set to increase volume substantially. It can hold up to 300 phone numbers, three per contact, has an alarm, and other features found in similar non-hearing aid compatible DECT phones. Keep in mind, however, that the hearing aid feature only works with newer Phonak model hearing aids. My wife, with normal hearing, finds this phone as good as any she's used in the past. I do highly recommend this telephone to Phonak HA users. It's worth every penny! Huge difference, Thomas. This phone, when held close to a hearing aid with T-coil, will transmit to both hearing aids simultaneously. This increases understanding geometrically. Without hearing aids, the phone can also be set to increase volume substantially. It can hold up to 300 phone numbers, three per contact, has an alarm, and other features found in similar non-hearing aid compatible DECT phones. Keep in mind, however, that the hearing aid feature only works with newer Phonak model hearing aids. My wife, with normal hearing, finds this phone as good as any she's used in the past. I do... » Read More Huge difference, Thomas. This phone, when held close to a hearing aid with T-coil, will transmit to both hearing aids simultaneously. This increases understanding geometrically. Without hearing aids, the phone can also be set to increase volume substantially. It can hold up to 300 phone numbers, three per contact, has an alarm, and other features found in similar non-hearing aid compatible DECT phones. Keep in mind, however, that the hearing aid feature only works with newer Phonak model hearing aids. My wife, with normal hearing, finds this phone as good as any she's used in the past. I do highly recommend this telephone to Phonak HA users. It's worth every penny! « Show Less
Biggest difference from regular cordless speaker phone?
sound goes directly into hearing aids without speaker phone distortion. clearer and more distinctive words vs just louder. also allows my mother in law and father in law to both be on the phone conversation together since the speaker volume does not disrupt her
how does this keyboard compare to casio CTK 3200?
Not quite sure about Casio other than Yamaha is a better quality sound/ more settings/features
how does this keyboard compare to casio CTK 3200?
I'm not familiar with Casio either, but I've had the Yamaha for 5 years and it's been wonderful and never given me any trouble at all. It also has great sound quality and all the features you'll probably ever need.
how does this keyboard compare to casio CTK 3200?
I've not tried the CTK 3200, but when I did a comparison, it looks like it generally has more features, seems to look more attractive and approaches built-in lessons differently. I would suggest looking at these in person to get a clear idea of what you're purchasing to determine your likes/dislikes, and advantages/dis-advantages of both models.