query
stringlengths 20
2.05k
| answer
stringlengths 75
2.05k
|
|---|---|
These appear to be more than 1/4" thick. Is that a correct measurement?
|
they are more than 1/4" thick and less than 1/2" thick. they are a little too wide also, from neck to shoulder, i am going to cut them down and stitch them on my sewing machine. otherwise i like them
|
These appear to be more than 1/4" thick. Is that a correct measurement?
|
These were not acceptable and i was unable to use them. Very cheaply made. You can pick up something better at your local fabric shop.
|
Do you need a luggage rack to use this saddlebags?
|
I would think that you need some form of support to keep them off of the exhaust. I have pannier racks on my xr650 and they fit great to them. The saddlebags have a x pattern strap on the back that secures them to the pannier rack.. You may be able to get by around town with them draped over the seat but not off road. Hope this helps.
|
Do you need a luggage rack to use this saddlebags?
|
Friend, that really depends on the bike. The bags in themselves, do not. If there is an exhaust in the vicinity,I would recommend racks or shield to protect the bike's plastics and the bags.
|
Do you need a luggage rack to use this saddlebags?
|
My bike is a DR650. It has DirtBagz brand pannier brackets. I have not fitted the Riggs to them yet but I wouldn't want to go with out the brackets. I think there would be melting on the exhaust and possibly interference with the rear tire while riding on rough terrain. YMMV
|
Do you need a luggage rack to use this saddlebags?
|
Not really because they strap across the seat also. But side racks are real helpfull to secure them away from moving parts and the hot exhaust
|
Do you need a luggage rack to use this saddlebags?
|
I use these as a spare saddlebag that i mount above my hard case saddlebags. I do not think any kind of rack would be needed as long as the bags are not resting against your exhaust. There are tons of straps included to mount them to about any type of bike.
|
Do you need a luggage rack to use this saddlebags?
|
I did not need a luggage rack to use these on my Klein 650. When full the bags and straps rode very well without a rack.
|
Do you need a luggage rack to use this saddlebags?
|
They will strap across the seat so a rack is not always required. All bikes are different so please check your for exhaust, turn signal and chain clearance issues.Also, there is at least two reviews that speak directly to mounting the bags on 2 different bikes. You may find them helpful.Regards,MotorCycle Solutions LLC
|
Do you need a luggage rack to use this saddlebags?
|
Not really because they strap across the seat also. But side racks are real helpfull to securethem away from moving parts and the hot exhaust
|
Do you need a luggage rack to use this saddlebags?
|
for my 650 v-srtom only only left side-rt side exhaust guard holds off-no issue-left side needs bar license plate to pass foot peg-that info for suk vstrom
|
What is the texture like? Does it feel like a hard case?
|
No, it had a sight rubbery feel. Not too sticky just enough to keep it from slipping out of your hand.
|
What is the texture like? Does it feel like a hard case?
|
It's slim case with semi soft texture. Doesn't feel like hard case, but more solid, than silicon.
|
What is the texture like? Does it feel like a hard case?
|
Yes, it is a hard case. I have used those rubbery cases and they are useless. Also, those rigid, plasticy cases and they are junk. This one is firm, but feels good in your hand and also provides good protection for your iphone 5.
|
What is the texture like? Does it feel like a hard case?
|
The texture feels like a hard case and not a rubber case. But it is not a hard case
|
What is the texture like? Does it feel like a hard case?
|
It feels like a hard case but flexible, definately not like a jelly case. Hope this makes sense!
|
What is the texture like? Does it feel like a hard case?
|
It is jelly like with a smooth finish. The phone fit snugly in it. It is not a fully hard case more like a stiff flexible case.. If that makes any sense!
|
What is the texture like? Does it feel like a hard case?
|
The texture is similar to a hard case, but with more of a grip to it. Hard cases seem to slip right out of my hands, this one does not.
|
The pins in my headboard & footboard are 1.75" apart. Will these rails fit securely?
|
The 2" pin spacing is "on center," which means from the center of one pin to the center of the other. The easiest way to make sure that you are checking the "right" distance is by measuring from the top of one pin to the top of the other pin. The pins are often about 1/4" in diameter. This would leave 1.75" space in between, which is what you might have measured. Recheck the dimensions. The hooks in these rails are for pins on 2" centers, and they work perfectly for that.
|
Will this fit my 2014 Toyota Highlander? And do I need an already existing roof rack?
|
Go to ThIle's website....very user friendly. It will ask make and model and give you the appropriate fit kit.
|
Will this fit my 2014 Toyota Highlander? And do I need an already existing roof rack?
|
Hi Christine, please consult the "buyer's guide" on www.thule.com for the accurate fit information concerning your vehicle. There are other components that you will need as well. Thanks!
|
Will this fit my 2014 Toyota Highlander? And do I need an already existing roof rack?
|
You need a specific Fit Kit for your vehicle. Thule likely makes one, but you'll need to find the specific number that fits your vehicle. You can look it up on their website, or call their 800 number for assistance.
|
Can grill be removed to clean the blades?
|
I really don't know...however, I did note that having used it for the entire summer, I found the blades to be remarkably clean...if the grill does not come out, my plan is to take the fan out of the window, bring it into the yard and spray the fan blades with a water hose, let dry for a day or two before plugging it back it...good fan, worked well this past year...24/7 for a couple of months, relatively quiet . I used it on a lower speed setting...
|
Can grill be removed to clean the blades?
|
Yes. There are 6 small crews that secure the front and back grills. They require a small phillips head screwdriver. One caution about this fan. It is very noisey in Low speed mode. I rejected the first one, but the 2nd wasn't much better even though I kept it. I operate it mostly in the medium and Hi speed modes.
|
Can grill be removed to clean the blades?
|
Yes there are 6 small screws that hold the front grill to the rear grill and then its easy to get to the blades. But slightly tricky to put it back together. I found that once I got a couple started that I just layed the fan down with front facing up then the rest of the screws were replaced easily. I used my fan all of last summer 2012 and performed beautifully. The really nice thing about this fan is you can close the window behind the fan with the fan still in the window.
|
Can grill be removed to clean the blades?
|
Probably- 6 screws around the rim of the grill plate attach it to the frame, so it appears "Yes", if you must- But I'm never going to bother trying. PS- I *LOVE* this fan! Low/Med/High really are entirely different settings, & even "Low" completely turns over the air on entire 1st floor (~900 sq. ft.) in seconds! BEST window fan I've ever owned! E-reverse/exhaust is SO easy. I can understand that the noise bothers some-"White noise" = steady / smooth / continuous hum(24/7), with NO sudden jarring "bumps" in the sound, to disturb. Doesn't bother me, I LIKE it! But, beware- If you cannot tolerate a steady low hum, this fan may be too loud for you. Probably- 6 screws around the rim of the grill plate attach it to the frame, so it appears "Yes", if you must- But I'm never going to bother trying. PS- I *LOVE* this fan! Low/Med/High really are entirely different settings, & even "Low" completely turns over the air on entire 1st floor (~900 sq. ft.) in seconds! BEST window fan I've ever owned! E-reverse/exhaust is SO easy. I can understand that the noise bothers some-"White noise" = steady / smooth / continuous hum(24/7), with NO sudden jarring "bumps" in the sound, to disturb. Doesn't bother me, I... » Read More Probably- 6 screws around the rim of the grill plate attach it to the frame, so it appears "Yes", if you must- But I'm never going to bother trying. PS- I *LOVE* this fan! Low/Med/High really are entirely different settings, & even "Low" completely turns over the air on entire 1st floor (~900 sq. ft.) in seconds! BEST window fan I've ever owned! E-reverse/exhaust is SO easy. I can understand that the noise bothers some-"White noise" = steady / smooth / continuous hum(24/7), with NO sudden jarring "bumps" in the sound, to disturb. Doesn't bother me, I LIKE it! But, beware- If you cannot tolerate a steady low hum, this fan may be too loud for you. « Show Less
|
Plate size I receive many sets of Fiestaware as gifts. Some people buy the 5 piece sets, and some the 4 piece set shown here. I love the size that they call a 7 inch plate here, but it does not come with the 5 piece set. When I tried to order more 7 inch plates to match the colors for which I have received the 5 piece set, it actually matches the size of the small plate in the 5 piece set. Does anyone know which one it really is? Plate size I receive many sets of Fiestaware as gifts. Some people buy the 5 piece sets, and some the 4 piece set shown here. I love the size that they call a 7 inch plate here, but it does not... » Read More Plate size I receive many sets of Fiestaware as gifts. Some people buy the 5 piece sets, and some the 4 piece set shown here. I love the size that they call a 7 inch plate here, but it does not come with the 5 piece set. When I tried to order more 7 inch plates to match the colors for which I have received the 5 piece set, it actually matches the size of the small plate in the 5 piece set. Does anyone know which one it really is? « Show Less
|
From the Fiesta Factory direct site: the 5 piece includes: One 7 3/4 Ounce Cup, One 5 7/8 Inch Saucer, One 7 1/4 Inch Salad Plate, One 10 1/2 Inch Dinner Plate and One 19 Ounce Bowl. The 4 piece set is identical minus the saucer. Fiesta also makes a 9" luncheon plate and a 6" bread plate and may other platters and pieces in all the current colors. http://www.fiestafactorydirect.com/
|
Plate size I receive many sets of Fiestaware as gifts. Some people buy the 5 piece sets, and some the 4 piece set shown here. I love the size that they call a 7 inch plate here, but it does not come with the 5 piece set. When I tried to order more 7 inch plates to match the colors for which I have received the 5 piece set, it actually matches the size of the small plate in the 5 piece set. Does anyone know which one it really is? Plate size I receive many sets of Fiestaware as gifts. Some people buy the 5 piece sets, and some the 4 piece set shown here. I love the size that they call a 7 inch plate here, but it does not... » Read More Plate size I receive many sets of Fiestaware as gifts. Some people buy the 5 piece sets, and some the 4 piece set shown here. I love the size that they call a 7 inch plate here, but it does not come with the 5 piece set. When I tried to order more 7 inch plates to match the colors for which I have received the 5 piece set, it actually matches the size of the small plate in the 5 piece set. Does anyone know which one it really is? « Show Less
|
According to this site (elder-beerman.com): *Set includes: 10.5"W dinner plate, 7.25"W salad plate, 19-oz. capacity soup/salad bowl, 10.25-oz. capacity mug . Hope this helps. http://www.elder-beerman.com/shop/home/dining-entertaining/casual-dinnerware/fiesta-dinnerware-4-pc-place-setting_386892.html
|
Plate size I receive many sets of Fiestaware as gifts. Some people buy the 5 piece sets, and some the 4 piece set shown here. I love the size that they call a 7 inch plate here, but it does not come with the 5 piece set. When I tried to order more 7 inch plates to match the colors for which I have received the 5 piece set, it actually matches the size of the small plate in the 5 piece set. Does anyone know which one it really is? Plate size I receive many sets of Fiestaware as gifts. Some people buy the 5 piece sets, and some the 4 piece set shown here. I love the size that they call a 7 inch plate here, but it does not... » Read More Plate size I receive many sets of Fiestaware as gifts. Some people buy the 5 piece sets, and some the 4 piece set shown here. I love the size that they call a 7 inch plate here, but it does not come with the 5 piece set. When I tried to order more 7 inch plates to match the colors for which I have received the 5 piece set, it actually matches the size of the small plate in the 5 piece set. Does anyone know which one it really is? « Show Less
|
I just purchased the 5piece sets. And it does come with a 7.25" salad plate. The only difference between THIS 4-piece set, and a 5 piece set is the mug. The 5pc set contains more of a 'tea cup' and it's 7.75oz along with a tea saucer that is 5.8". The four piece set has a larger mug 10.25oz.
|
where can I get earbuds for this
|
Stick to Sony ear buds other are to low in sound so order $50 dollor ear buds from best buy
|
where can I get earbuds for this
|
Anywhere! I use Skull Candy brand and they work perfect. I hope you are enjoying your walkman - I love mine. :)
|
Will it cut through 1960's hard plaster put onto breeze bloock without too much dust. I want ti cut 'chanels' for wiring and holes for plugs.
|
It might be able to do this job, but not with the blades that come with the tool. It seems to me that a concrete saw from the rental yard would make cutting the channels pretty easy. On the holes for the plug boxes, I think you could use this tool with a better quality blade (Maybe a diamond one).
|
Will it cut through 1960's hard plaster put onto breeze bloock without too much dust. I want ti cut 'chanels' for wiring and holes for plugs.
|
I'm sure there will be some dust but I use a vacuum right under the cutting blade and it really cuts down on the amount of dust that gets out into the surrounding area.
|
Will it cut through 1960's hard plaster put onto breeze bloock without too much dust. I want ti cut 'chanels' for wiring and holes for plugs.
|
I havent used it on plaster. I cut through crown molding in place on the ceiling, and it cut perfectly straight without disturbing surrounding area. Plaster is softer than wood so I think it shoukd work. However with plaster you'll always have dust. I think the dust will fall straight down in a concentrated area.
|
Will it cut through 1960's hard plaster put onto breeze bloock without too much dust. I want ti cut 'chanels' for wiring and holes for plugs.
|
It's funny that you ask, I just wanted completed a bathroom renovation in my home that was built using said hard plaster. And the answer to your question is no. There will be dust. Your best best it to run it with a shop-vac to such it up before it goes anywhere. But in all honesty regardless of what tool you use there will be some dust. But this tool made quick work of the cutting.
|
Will it cut through 1960's hard plaster put onto breeze bloock without too much dust. I want ti cut 'chanels' for wiring and holes for plugs.
|
I would suggest a more heavy duty saw. I used this one on some 3/8 oak plywood. Although it punched holes and cut through the material. It took way too long and was not very good at clean straight cuts. I would only use this for light sanding.
|
what is largest core bit this drill will accept need to drill 4 " holes in concret
|
Not exactly sure about the largest bit this tool will accept (maybe about 3/4").You will probably need to check on a much larger tool.
|
what is largest core bit this drill will accept need to drill 4 " holes in concret
|
I am impressed by this unit's ease of use for householder applications. 4" probably exceeds design limits but with very patient, steady guidance, you will likely accomplish your task. Attaching Bosch T3923SC Extension Bar with Bosch 4 3/8" or 3 7/8" Speedcore Bits you may be successful. SDS Max offers higher level of success.Good Luck !
|
what is largest core bit this drill will accept need to drill 4 " holes in concret
|
1-1/8 is the largest that is recommended. I have not had much luck with this tool, it's not up to usual Bosch standards
|
what is largest core bit this drill will accept need to drill 4 " holes in concret
|
If it was were me, I would try it. The drill has plenty of power, just go slow and easy, and I think you will be okay.
|
Will this work with my "antique" Cricut that uses the 6X12 inch mat? Is this Cricut compatible with the Cricut Craft Room download program?
|
I have the 1st expression and it's works on mine. Im pretty sure they have the same plug ins. And yes it does work with the cricut craftroom. very easy to set up your machine with the craftroom. It gives you easy to follow instructions. I hope this helps!
|
Will this work with my "antique" Cricut that uses the 6X12 inch mat? Is this Cricut compatible with the Cricut Craft Room download program?
|
Well, the cord didn't work on my Cricut Imagine, because the machine wasn't recognizing it.
|
Do these headphones fold? Also, do they have volume control?
|
They DO fold http://thumbnail.image.rakuten.co.jp/@0_mall/dj/cabinet/shure/srh440-shure-b.jpg http://cdn.cultofmac.com/wp-content/uploads/2009/09/srh440-12.jpg, no volume control.
|
Do these headphones fold? Also, do they have volume control?
|
They do fold up underneath the headband. They even come with a carrying case. As for volume control, no there isn't one. Volume is controlled through the source they are plugged into. However, I use them on my PC without an external source (headphone amp or receiver) and they can get plenty loud. Their impedance is low enough that most devices can power to ear shattering levels.
|
Do these headphones fold? Also, do they have volume control?
|
Yes they do fold. As far as volume control, I dont believe so. The volume is controlled through my audio interface.
|
Do these headphones fold? Also, do they have volume control?
|
They do not have a volume control, but they in fact fold, the ear pads fold up into the headband. In stock ready to go.
|
Is this compatible for my Lowrance LVR-850 DSC VHF Marine Radio? It can't be more than 3 decibels and it needs the RG58 coaxial cable.
|
The antenna has 6db gain. You may want to consider a shorter 3-4' antenna that provides the 3db you're looking for. Here's an Amazon link for you to consider: http://www.amazon.com/ANTENNA-VHF-feet-GAIN-WHITE/dp/B000MMF3U8/ref=sr_sp-atf_title_1_5?ie=UTF8&qid=1398635229&sr=8-5&keywords=3db+marine+antenna
|
Is this 251.64 price for two speakers mr dj pp3500mp3 15 inch with remote PA
|
no el precio es de una solo pieza y la recomiendo muy buena, no obstante favor solicitar que sea bien embalada ya que la que adquirí vino el micrófono roto y la corneta golpeada por un costado de resto magnifico.
|
Is this 251.64 price for two speakers mr dj pp3500mp3 15 inch with remote PA
|
si amigo ese es el precio, la corneta es exelente, la uso en un grupo de salsa
|
Do I have to purchase a solar panel seperately? In the product description, there is no solar panel included.
|
Everything you need is in the box, its a small panel that you can stick in the ground. I attached the panel to the roof cause it gets more sun that way. They light up when it starts to get dark and in early morning they are still on if there was a lot of sun that day. I really enjoy them.
|
Do I have to purchase a solar panel seperately? In the product description, there is no solar panel included.
|
No, it is there... I have had mine outside everyday rain and shine since early December 2013, and it has gone on everyday. The only exception is if my panel gets knocked over and does not get the full dose of sunshine. I am planning on buying a couple of more. I love it!
|
Does it have the cups or some kind of bra.
|
No, but it has an extra lining all the way through. Definitely designed for swimmers.
|
Does it have the cups or some kind of bra.
|
No, but I didn't have an issue with nipples showing or my breast feeling like they were not supported.
|
Does it have the cups or some kind of bra.
|
No it does not have any sort of bra, but the entire suit has double layers so if you getvthe right size it will hold you in nicely.
|
I wear a ladies size 9. Will the fit over my shoes?
|
I wear a 7 and they are too big for me maybe too small for a 9 .but I just wear a sling shoe inside. hope this helps.
|
can this be used for car audio?
|
Should be fine for basic audio. For High Wattage and high end speakers I wouldn't. I would use a higher gauge. Be careful of some speaker wires. Bought an audio kit for a car and the wire was so brittle, after a few months all the strands broke and no conductivity. It was at a fitting that went in the input to the amp. Caused by the vibration of the car and going over bumps broke it through.
|
can this be used for car audio?
|
http://www.crutchfield.com/S-EKGSHPOw4k0/learn/learningcenter/home/speakers_wire.html
|
can this be used for car audio?
|
You could buy it is kinda thick so not sure how you will hide it? Good luck
|
can this be used for car audio?
|
Yes, I don't see why it would not work. I've read that people usually use 18AWG for car audio but this should work.
|
can it be converted to natural gas?
|
Ours says for liquid propane only. May be able to change the orifice to a natural gas. But, not that I can see. Sorry.
|
can it be converted to natural gas?
|
There is a conversion kit (sold separately) part SGA7000 for use with natural gas.
|
can it be converted to natural gas?
|
Sorry, I have no idea. Never needed to ask. You might check for an online user guide and see if there's any information.
|
What specific type of usb does it take to operate a sync within the mp3 player and the computer/laptop?
|
I'm not sure! The USB cord came with mp3 playe! I sent mine back to the factory to be repaired since it's still under warranty, but they asked for almost $20 shipping!!! Don't waist your money on this!
|
What specific type of usb does it take to operate a sync within the mp3 player and the computer/laptop?
|
Don't need to sync... just plug in to your computer and the Pyle will show up as a external drive - you just input or drag your music onto the Pyle icon
|
What specific type of usb does it take to operate a sync within the mp3 player and the computer/laptop?
|
the usb comes with the device, it is very small and is not the same as mini usb or kindle usb , those are the ones I had and didn´t fit
|
What specific type of usb does it take to operate a sync within the mp3 player and the computer/laptop?
|
The player comes equipped with the USB cable that both charges and syncs the music.
|
What specific type of usb does it take to operate a sync within the mp3 player and the computer/laptop?
|
It comes with a charge/sync usb cable. It will plug into any usb slot on a computer or (usb) block plug. The end that plugs into the mp3 player is a micro usb plug.
|
What specific type of usb does it take to operate a sync within the mp3 player and the computer/laptop?
|
Hopefully you are not the person that took off with mine!!! lol But I believe the USB is called a Micro USB B, judging by the picture I could find on line. Hopefully that helps...
|
Can these headphones only be used on Apple products or any laptop/mp3 player?
|
These can be used on any item with a 3.5mm headphone jack. This includes laptops, MP3 players, Apple products, as well as all major items for audio. I personally do not recommend these as far as sound quality and durability. There are many other products that do the job better than these for less money.
|
How do we size this shirt?
|
I went to the regular Tommie copper site, they have a size chart. Then I ordered it here. It has sure helped my shoulder pain.
|
Does it work with online gaming?
|
Most definetly. It pretty much plug and play. If ur used to n playing.offline.make sure u create ur gamertag for xbox live and u keep that gamertag signed in. it works.great!!!
|
Does it work with online gaming?
|
Yes it does. I can do anything online with this adapter and have had no issues.
|
Does it work with online gaming?
|
I have been using it for about a month playing TitanFall. It worked perfectly right out of the box and I have had no issues.I have not noticed any lag in controller response, being a wireless connection.
|
How difficult is it to set up?
|
Never had to....I just tuned it and started playing. In fact, I haven't changed any of the strings yet either....sorry I can't be much help.
|
How difficult is it to set up?
|
I was told it wasn't that hard to get it put together. Basically I think it was pretty together when it came.
|
How difficult is it to set up?
|
As the others have said, there was no setup required. I just tuned it. I am not a left-handed player, so I have not actually "played" this guitar. However, it all seemed fine to me right out of the box. The action and intonation were good.
|
I am getting a Runtime erro 53 when trying to load last years 2013 TFP info. Has anyone had this problem?
|
Try going on-line to the manufacturer's website http://www.custsupp.com (Looking up FAQs), or calling technical support at 866-483-8131 or emailing them at [email protected]. (This contact info. is from 2013.) Check Help tab drop down "About TFP" to compare nbrs. Info may have changed. Each year it seems there's a new wrinkle from the previous one.
|
Will this stereo fit 2008 Passat sedan?
|
Fit my 2006 gti perfectly. Sounds great and easy to use. I wish I would have gotten the backup camera and the tv tuner to fully utilize all the features.
|
Will this stereo fit 2008 Passat sedan?
|
My son bought this and fitted it in his Golf GTI so I can't help answer your question. I can, however, tell you that he is VERY happy with this purchase and the item is fantastic quality that works perfectly!
|
Will this stereo fit 2008 Passat sedan?
|
Almost positive the passat has same radio my rabbit did. This radio was perfect fit in rabbit. However, verify what radio you have first.
|
can these be spliced into a three way connector?
|
thanks for your asking. Sorry that this type can not be spliced into a three way connector. You can tell us more detailes about your demand, we are glad to offer you some other solution. tks.
|
can these be spliced into a three way connector?
|
They work but you must be careful to a line properly and not pull or stress connection
|
can these be spliced into a three way connector?
|
Don't know, I bought them for corners[ 90%] there are a lot more of these available on other websites,go to brand name maker sight & see what is available
|
shipping for brazil?
|
Hi , thanks for asking me I never did that before for international shipping . I have to check for shipping agent company
|
Will this work with a .22 LR AR mag?
|
No because its made for double stacked mags. If you have ever used .223 mags it builds alot of pressure the more bullets you feed in. On a .22 usually have a slider and can be done easily. I also have the colt .22 and yes it takes time to load them but it's pretty easy.
|
Will this work with a .22 LR AR mag?
|
No, but it is possible to get a speedloader for the .22 LR AR. I have seen one in a Natches Shooters Supply catalogue.
|
Will this work with a .22 LR AR mag?
|
Brian. I will have to be honest, I'm not surebut they are the best loaders i have ever used, infact i'm ordering a 9mm also. I would contact amazon or your nearest gun store to see. SORRY
|
Will this work with a .22 LR AR mag?
|
No, it works with 5.56/ .223, the .22 mags have a different feeding method.
|
what is the best battery for this flashlight?
|
I have found that the 18650 3000mAH batteries work very well with it. You can get the inexpensive charger andd use them over and over again or charge up an extra set for when the ones in the flashlight drain down. The specific brand I use is UltraFire batteries.
|
what is the best battery for this flashlight?
|
but I would not buy the 13000 lumen flashlight. it's nowhere near as bright as my 11000 and mine came with batteries and a charger and was less expensive
|
i am due in june will any upgrades to samsung 3037 be made before then? thanks
|
There is a new version of the hardware that was released sometime in 2013. It is not marked any differently. The only way that you can tell is looking at the handset. On the new version the right-hand middle button on the front has a camera icon. In the old version it said Sleep. The differences are that the former Sleep button now toggles through multiple cameras, and press-and-hold sleeps. Also, the former OK/Night Light button is now OK/Zoom Toggle and press-and-hold toggles the night light. Finally, the mic on the camera is more sensitive -- I would say a touch too sensitive now.
|
i am due in june will any upgrades to samsung 3037 be made before then? thanks
|
Samsung would be the appropriate people to ask regarding this, however they may not be willing to release that information due to competitive reasons. 2-3 months will likely not yield any great advancements in baby monitor technology.
|
How long does it need to decompress before you can use it?
|
We slept on it the next night after it arrived. Very comfortable too! Excellent investment.
|
Is the ivory color a yellowish beige or more of a light tan/brownish beige?
|
When it first arrived..it was white/white. Three months later, which does not really answer the question, I would say it is more light tan than yellowish beige.
|
Is the ivory color a yellowish beige or more of a light tan/brownish beige?
|
Unfortunately, I purchased it in white. However, it is very, very nice- I love it.
|
Hello, I just recieved my little chair and I can not get the metal bars to meet to lock the chair into place. Why? How do the bars meet? I've tried and can't lock it.
|
Same problem here. Read the comments below, added a little pressure to join them up and it worked! Thanks guys!!
|
Hello, I just recieved my little chair and I can not get the metal bars to meet to lock the chair into place. Why? How do the bars meet? I've tried and can't lock it.
|
An easy way to set up the chair is to place the ground support leg, that has the bar with the little knob at its end, against your chest. Then turn the bar with the little knob at its end toward the other bar with the holes in it so that it rests below the bar with the holes in it. Then line them up, and with just a little pulling force on the other leg (the one that has the bar with the holes in it), insert the bar with the knob into one of the holes. I use the last hole (it's the easiest). I think the other holes are there for when the chair starts to shrink once it's used a bit and starts to loosen up. An easy way to set up the chair is to place the ground support leg, that has the bar with the little knob at its end, against your chest. Then turn the bar with the little knob at its end toward the other bar with the holes in it so that it rests below the bar with the holes in it. Then line them up, and with just a little pulling force on the other leg (the one that has the bar with the holes in it), insert the bar with the knob into one of the holes. I use the last hole (it's the easiest). I think the other holes are there for when the chair starts to shrink once it's used a bit and... » Read More An easy way to set up the chair is to place the ground support leg, that has the bar with the little knob at its end, against your chest. Then turn the bar with the little knob at its end toward the other bar with the holes in it so that it rests below the bar with the holes in it. Then line them up, and with just a little pulling force on the other leg (the one that has the bar with the holes in it), insert the bar with the knob into one of the holes. I use the last hole (it's the easiest). I think the other holes are there for when the chair starts to shrink once it's used a bit and starts to loosen up. « Show Less
|
Hello, I just recieved my little chair and I can not get the metal bars to meet to lock the chair into place. Why? How do the bars meet? I've tried and can't lock it.
|
you have to force them, bring the two metal bars around so that it looks like the picture, then you stretch them so that the male part inserts into the first hole in the other bar. It can take some strength at first but then it stretches pretty easily and you have to use the farther holes
|
Hello, I just recieved my little chair and I can not get the metal bars to meet to lock the chair into place. Why? How do the bars meet? I've tried and can't lock it.
|
I laid it on its side. I put one foot on the leg/metal cross bar touching the ground and then slowly applied body weight on the leg that was elevated off the ground. My body weight and a little bit of effort made it pretty easy to latch the two metal arms together. I wasn't able to apply enough pressure to push the two together with it sitting in my lap, but doing it the way I suggested was pretty easy and it does loosen up after that.
|
Hello, I just recieved my little chair and I can not get the metal bars to meet to lock the chair into place. Why? How do the bars meet? I've tried and can't lock it.
|
I am sorry but I couldn't lock the chair either.On other reviews, they said they had hard time too. I just did not understand what they meant until I got the chair.
|
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.