query
stringlengths 20
2.05k
| answer
stringlengths 75
2.05k
|
|---|---|
can I use this in a lenovo K450E
|
Hi Phantom,The HyperX Fury memory should work in the Lenovo K450e but may not run at full speed depending on the capability of the processor. The system only officially support 1600MHz so the memory may only run at 1600 even though it is rated for 1866. If the process in your system is capable of it then it may run at the higher speeds. Our Fury memory is Plug N Play so it will automatically run at the fastest speed supported by the system.Thank you for considering HyperX Fury memory!-Jewel @ HyperX Technical Support
|
can I use this in a lenovo K450E
|
Yes you can use it but trying to add it to the existing 8GB on there might cause problems, that memory is 8GB 1600Mhz and this is a 8GB of 1866Mhz its not good mixing memory
|
It is fit a ram 1500 four door 2002? Are a pair?
|
I dunno. I'd call the manufacturer of the steps. They're very nice. And yes there's 2 in there
|
It is fit a ram 1500 four door 2002? Are a pair?
|
Yes they will work with a 2002 Ram 1500 Quad Cab. Thanks!! Wundercarparts 888-986-3373
|
It is fit a ram 1500 four door 2002? Are a pair?
|
Yes there are a pair. I put them on an 04 2500 four door, not sure about a 1500, Sorry.
|
does this work with windows 7
|
I used Windows 8.1 but I the cable would work with any operating system. The compatible software can be downloaded.
|
what is the difference between frustation and standard
|
The difference is that they are not packaged in the hard plastic that you have to use a box cutter or scissors to open. These are packaged in baggies which are much easier to open. but you should really buy this Primula, it's good for ya
|
should I even bother to ask? Does it work with windows 8?
|
Yes, you can find drivers at http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4132&lc;=en&cc;=us&dlc;=en&sw;_lang=&product;=4066377
|
should I even bother to ask? Does it work with windows 8?
|
I do believe it dose, you can check by going to www.hp://deskjet1000printer.com/support
|
How much weight will it actually hold?
|
I've put it to its practical weight test by far-- I've had my mouse, 17 inch laptop, and multiple bottles of water on it whilst putting pressure on the top. Didn't even budge, nor did it feel like it was anywhere close to giving way, and I don't know why'd you be putting too much else on it. However, I'm sure that it could hold upwards of 50 lbs, easily. Keep in mind, though, that the legs are telescopic and that the further they are extended, the more unstable the table is likely to be. I probably wouldn't be putting a big television on it with the legs extended all the way. (although you could probably try, I woudn't doubt this thing) I've put it to its practical weight test by far-- I've had my mouse, 17 inch laptop, and multiple bottles of water on it whilst putting pressure on the top. Didn't even budge, nor did it feel like it was anywhere close to giving way, and I don't know why'd you be putting too much else on it. However, I'm sure that it could hold upwards of 50 lbs, easily. Keep in mind, though, that the legs are telescopic and that the further they are extended, the more unstable the table is likely to be. I probably wouldn't be putting a big television on it with the legs extended all the way. (although you... » Read More I've put it to its practical weight test by far-- I've had my mouse, 17 inch laptop, and multiple bottles of water on it whilst putting pressure on the top. Didn't even budge, nor did it feel like it was anywhere close to giving way, and I don't know why'd you be putting too much else on it. However, I'm sure that it could hold upwards of 50 lbs, easily. Keep in mind, though, that the legs are telescopic and that the further they are extended, the more unstable the table is likely to be. I probably wouldn't be putting a big television on it with the legs extended all the way. (although you could probably try, I woudn't doubt this thing) « Show Less
|
How much weight will it actually hold?
|
I don't know about any one other than the one I bought. The last time I set it up, I left it with a stack of about ten 8"x10" color photos on it. When I came in the house about an hour later, one leg had collapsed and all the photos were on the floor. I threw it away after that.
|
How much weight will it actually hold?
|
I've only used it for a video projector, about 10lbs and a macbook pro, about 3 pounds. It's pretty stable. using the non extended legs. I haven't tried them extended but I would assume the higher you go, the less stable it is.
|
How much weight will it actually hold?
|
I used it for the first time with a MacBook Pro (plus hard-shell cover) and Epson projector, with the legs fully extended. It was wobbly, though not so much that I was worried a breeze from the A/C would blow it over. :-) On the other hand, it's not easy to tell when the telescoping leg sections have locked into place, and I noticed after about an hour that one of the legs was slowly shrinking. I re-extended, re-locked, and it made it the remaining 6 hours in my day of presentations with no further incident.
|
How much weight will it actually hold?
|
I own a high-end workstation grade laptop with an expansion battery that weighs 5 - 6 pounds. It easily supports that plus my arm resting on the edge when I am using a mouse. Because the legs flair out at an angle it is quite stable. Yes, you can make it wobble but you don't notice it when typing. I certainly would not sit or stand on it, but I believe you could easily stack 2 or 3 laptops. I have use it to support test equipment that was in the same weight range as laptops without issue. Otherwise, I never really tried to maximize/measure its weight capability. Not sure if the manufacturer has a spec for it.../Brian I own a high-end workstation grade laptop with an expansion battery that weighs 5 - 6 pounds. It easily supports that plus my arm resting on the edge when I am using a mouse. Because the legs flair out at an angle it is quite stable. Yes, you can make it wobble but you don't notice it when typing. I certainly would not sit or stand on it, but I believe you could easily stack 2 or 3 laptops. I have use it to support test equipment that was in the same weight range as laptops without issue. Otherwise, I never really tried to maximize/measure its weight capability. Not sure if the manufacturer... » Read More I own a high-end workstation grade laptop with an expansion battery that weighs 5 - 6 pounds. It easily supports that plus my arm resting on the edge when I am using a mouse. Because the legs flair out at an angle it is quite stable. Yes, you can make it wobble but you don't notice it when typing. I certainly would not sit or stand on it, but I believe you could easily stack 2 or 3 laptops. I have use it to support test equipment that was in the same weight range as laptops without issue. Otherwise, I never really tried to maximize/measure its weight capability. Not sure if the manufacturer has a spec for it.../Brian « Show Less
|
can I use this on a hospital bed with a air mattress and no boxspring.I can'twalk,it is just to help me turn in bed
|
I ordered another type of bed rail for my mom about 3 years ago. It was called The Bed Cane. It works for beds with a box spring. If I were you I would call the company that you would order it from. They were very helpful to me when I had questions about which bed rail to order. Good luck.
|
can I use this on a hospital bed with a air mattress and no boxspring.I can'twalk,it is just to help me turn in bed
|
maybe...the device I got works by sliding a flat part under the mattress (usually between the mattress and box) and then fastening it with a long belt so that it stays secure. Not knowing about the under-workings of a hospital bed, I'm not sure if the long strap would work. the picture here isn't what I got for my father. his had a smaller rail (maybe 1' x1 1/2', kinda square) and was stationary.
|
can I use this on a hospital bed with a air mattress and no boxspring.I can'twalk,it is just to help me turn in bed
|
I believe it is necessary to be put between a mattress and box spring. After my husband's stroke we used it to help him sit in the bed on the edge. It did need the straps under the mattress to maintain its stability.
|
Will this fit in my 2005 Ford Crown Victoria?
|
Yes, it will fit your Crown Vic. You will require a dash install kit and wiring harness to complete installation.
|
will case & keyboard fit with galaxy s3 in normal mens shirt pocket? Feb 1,2014
|
I would say yes, but part of it may stick out.. also its little bulky .. unless ur shirt pocket is deep
|
will case & keyboard fit with galaxy s3 in normal mens shirt pocket? Feb 1,2014
|
This case kit makes the galaxy 3 to 4 times bulkier. Imagine the bulk of 3 Galaxy S3s taped together into a bundle (with the weight of 2.) It should just barely "fit" into a decent size mens shirt front pocket, but I can't imagine it being workable to carry it that way.
|
will case & keyboard fit with galaxy s3 in normal mens shirt pocket? Feb 1,2014
|
I wouldn't recommend this. Only because it is very cheaply made. It doesn't fit well in the case. However it does connect to the device through bluetooth well. The other downside that I didn't think about was the keyboard isn't lighted. If I did it all over again, I would go with a more expensive model as opposed to this one. To answer your question, I don't think it would fit into a men's shirt pocket once the case is attached to phone and keyboard.
|
My remote control no longer work, it is MA Audio (MA5817) Where can I buy a replacement?
|
The quality is cheap the remote breaks fast.. not worth the money.. I'd spend it else where only lasted 2 months..
|
My remote control no longer work, it is MA Audio (MA5817) Where can I buy a replacement?
|
I cant say for sure where to buy another one at where you live, but if you return and or contact MA Audio with your concern I bet they can handle it for you.
|
Are the cutters carbide?
|
Hi Lou,Yes, this bit is made of TiCo Hi-Density Carbide for maximum cutting life. Hope that helps!
|
Do you have to put this stroller together or does it come totally put together?
|
The main body is together but the tires you would have to install but very easily done. Snap on the chair covers and your done. Is equipped with belted seat belts that help keep the dolls in place.
|
Do you have to put this stroller together or does it come totally put together?
|
You have to put the stroller together. It was easy to do. The overall stroller is very flimsy. It look good though.
|
I see that this lens has Manual focus capability. Does anyone know how the manual focus operates? Slip-ring or switch?
|
It has that standard AF/MF switch on the side. Set to MF and you adjust the focus with the ring. It's like the other lenses I've used from Canon and others. I'm not sure what slip-ring would be, unless you mean it focuses and then you change it. I haven't tried that.
|
Can you mount this without the down stem so it is more like a flush mount?
|
No. You need a stem for the shaft to have a place to mount to the ceiling fixture, however, I sure that you can get an optional 'snugger' adapter for low ceilings. Hope that this helps.
|
5d mark 3 or 1ds which is best?
|
depends what you are planning to do, but i would get the 5d because it is more compact and should not be any worse, being much newer. The 1ds is fully professional, so surely not bad either.
|
5d mark 3 or 1ds which is best?
|
the 1Ds has a very low ISO capability.......the 5D is comparable in Image and skys the limit ISO..........1Ds better Image
|
5d mark 3 or 1ds which is best?
|
http://snapsort.com/compare/Canon-EOS-5D-Mark-III-vs-Canon_EOS-1Ds_Mark_III
|
If I buy a drinking water-safe hose, does attaching it to the leader hose defeat the purpose? Like does that leader hose itself have lead in it?
|
No hoses have lead in them. To get to the leader hose it has to go through water pipes. Not sure what kind of water pipes (supply lines) you have. Jim
|
If I buy a drinking water-safe hose, does attaching it to the leader hose defeat the purpose? Like does that leader hose itself have lead in it?
|
You can change the primary supply hose to drinking-water safe if you wish. It is secured with stainless hose clamps.
|
If I buy a drinking water-safe hose, does attaching it to the leader hose defeat the purpose? Like does that leader hose itself have lead in it?
|
Hard to say... I wasn't aware that a standard water hose wasn't drinking water safe. There is a 3 foot lead as you have noted... but only Ames can tell you about any lead content...although it looks like all brass fittings to me.
|
Will this doll carrier fit a 12 inch Corolle baby doll
|
Yes it will. Absolutly one of the best doll producted I have ever purchased and my daughter loves it!
|
Will this doll carrier fit a 12 inch Corolle baby doll
|
I don't know what kind of doll that is but my 6 yr old uses it with a large soft baby doll and a harder Journey doll. The harder the doll the more it doesn't conform to the body when wearing it. You can fit many different size dolls in this from small to large.
|
Will this doll carrier fit a 12 inch Corolle baby doll
|
I believe it will. We've had a range of dolls in our carriers from a vintage Betsy Wetsy to Cabbage Patch dolls and have all worked fine.
|
Will this doll carrier fit a 12 inch Corolle baby doll
|
I'll just reiterate what the others have said. I am a mama to 5 girls, 4 of which are old enough to use this. We have a range of baby dolls and sizes and all have been in it since my girls got it on Christmas. For the little baby's my girls use it to kind of cradle them. They use a tiny blanket and make it like you would an Ergo baby insert. :)
|
Will this doll carrier fit a 12 inch Corolle baby doll
|
Yes. It will fit most any size doll since it has an inner pocket of sorts that keeps the dolls secure.
|
Will these work with an ankle high hiking boots? Like a Vasque?
|
I wear them with brooks running shoes and the top of the gaiter sits about 1.5-2 inches above my ankle. So it may work for your boots.
|
Will these work with an ankle high hiking boots? Like a Vasque?
|
Probably not. They are designed for a running shoe. I purchased them with my Salomon winter runners (as shown). The rubber fits under and it's pretty snug to fit around the shoe. It works great for these shoes even in deep snow!
|
Will these work with an ankle high hiking boots? Like a Vasque?
|
Mine worked well with regular ankle high Salomon trail shoes (for a Spartan race) so for your boots they may be too short.
|
Will these work with an ankle high hiking boots? Like a Vasque?
|
They should... I'm not positive though...some help I am , I wear a sz.14 shoe and they worked for me , I hurt my back at Mud Run and unfortunately won't be using them again
|
I Can't read the instructions on my bottle
|
Really no directions listed. Just states it is for body and volume. I use 2 full pumps. Spread in my hands then onto wet hair. I like the smell & how it also feels silky.
|
roughly how many grams of tea will one ball hold ?
|
I do not know exactly how much it will the first two you use it; however it is irrelevant as it is very flimsy and comes apart, thereafter. This is the most disappointing purchase I have made on Amazon, but as they say: "you get what you pay for." I will not go the cheap route the next time.
|
roughly how many grams of tea will one ball hold ?
|
i never measure anything so i can't help you -- who uses grams anyway???? we use teaspoons here.
|
roughly how many grams of tea will one ball hold ?
|
150 probably. it is huge! not practical with tea. It works great for herbs and spices when you make a big pot of broth or soup.
|
What are the dimensions when folded up? I am wanting to use this for travel and want to see how much space it will take up in my suitcase.
|
Mine measures about 35" long by 23" wide by 2 and 1/2 " deep. It's pretty light and looks like it would fit in a large suitcase easily.
|
What are the dimensions when folded up? I am wanting to use this for travel and want to see how much space it will take up in my suitcase.
|
Approx. 22" H x 35" L x 10" to 12" w the measurement is the bag the pen comes in. I don't have the pen inside because it's in use. The bag the pen comes in has handles. I would not suggest packing inside a suitcase unless its a trunk style.
|
What are the dimensions when folded up? I am wanting to use this for travel and want to see how much space it will take up in my suitcase.
|
Sorry, I cannot give an answer to your question. Our dog chewed the beginning of the zipper and we put a round board on the bottom of the playpen so he could no longer get to the zipper. We do not fold the playpen knowing that the zipper would come apart. Like the playpen very much, our dog even sleeps in it and he is very comfortable. A safe place to keep him when needed.
|
What are the dimensions when folded up? I am wanting to use this for travel and want to see how much space it will take up in my suitcase.
|
I am sorry to say I had to return the kennel, my dear dog passed over Rainbow Bridge right before I got the kennel......however I can tell you that it will NOT fit in a suitcase, it is large and flat for a car. Hope that helps
|
is there a way to tighten the see-saw motion? it's too loose and doesn't hold it's place very well and i find myself trying to balance the stand?
|
No, I don't think you can lock the see-saw motion of the top bit - it's based on the weight of your feet to decide the angle that it will be most comfortable for you. You can adjust the height of the footstool only. Hope this helps.
|
is this the original bae mineral foundation?? also what about the size?
|
It's real bare minerals make up. And it's pretty big. About 3 in in diameter and 1 1/2 tall. Hold true to 8oz
|
can i fix it on xperia zr?
|
It's compatible with virtually all iOS and Android smartphones. Pls, see here: http://store.sony.com/smartphone-attachable-lens-style-camera-zid27-DSCQX10//cat-27-catid-Cyber-shot-Compact-Cameras?var_id=27-DSCQX10%2FB
|
can i fix it on xperia zr?
|
Not familiar with that model, but the clip range can accommodate iPhone 5/5s and HTC One very easily. If the Xperia dimensions are between those two models it should (again assuming it's plain rectangular format). Hope that helps.
|
TSX-130 had terrible FM reception. Better on this model?
|
Yes, with the plug in antenna the FM reception is good. However, AM is terrible.
|
TSX-130 had terrible FM reception. Better on this model?
|
I'm satisfied with the FM reception but a lot has to do with where you place itAnd that goes for all of my four radios.
|
TSX-130 had terrible FM reception. Better on this model?
|
I live in a area where I have poor FM reception.....but the TXS-130 is a very good unit
|
does this actually come the target and arrow rest?
|
There is no arrow rest on this bow, the arrow rest on your hand.It is a traditional style of bow.
|
Does it have an option to feed in multiple photos for scanning?
|
Nope. but you can put several photos on the scanner bed to scan at once. The scanner bed is about 9 in x 14 in.
|
Why won't the battery calibrate after purchase?
|
I'm not sure what you are expecting by calibration, but it should be able to charge completely plugged in, and then used unplugged till it draws battery down to 10 I'm not sure what you are expecting in the way of calibration. But you need to charge battery till it shows 100% and then use the laptop or leave it unplugged until the battery drains to 10%. They recommend this 2 or 3 times before using. I have had good luck with this battery and have used unplugged for as many as 7 hours. Times depend on laptop settings such as screen brightness, dvd usage, etc. If you are still having an issue perhaps you received a bad battery and need to talk to manufacturer, or place you purchased, and also make sure your laptop is showing that the battery is indeed charging. Best of luck
|
Can it be free standing or does it need to be mounted? Does it open from only the back for tray removal or front also?
|
It should be mounted, I would be afraid of it falling over when the chickens get on the bars otherwise. But mounting is an easy couple screws into something behind it. Not sure what you mean by tray removal, I bought the additional inserts for the bottoms of the boxes and they just go in and out of the holes the chickens go into.
|
Can it be free standing or does it need to be mounted? Does it open from only the back for tray removal or front also?
|
Mine is hung to the wall but like John B states I would at least put the 1 screw in to stabilize it. Egg can be taken from the front or the back. Good quality unit
|
Can it be free standing or does it need to be mounted? Does it open from only the back for tray removal or front also?
|
It can be freestanding, however I put one screw in to improve stability. Both the front and the back of the nesting boxes are open, so eggs may be retrieved from either side.
|
Can it be free standing or does it need to be mounted? Does it open from only the back for tray removal or front also?
|
Doesn't open from back but is easy to clean. We bought nesting box mats we just pull them out and hose down. Needs to be secured somehow the roost areas on front would pull it over if not secured.
|
based on negative reviews what is assurance the c pen will perform as expected
|
For light use it is fine. Screen protectors can affect sensitivity. Doesnt hold up long to extended use like for drawing.
|
based on negative reviews what is assurance the c pen will perform as expected
|
Well, don't know for sure, maybe in may case the screen protector is to thick and the pen can't have the proper contact with it, don't know, one thing I can tell you, I just have 3 months with it and the rubber tip already tor of. I'm expecting to see if I'm reliable for an exchange on it.
|
based on negative reviews what is assurance the c pen will perform as expected
|
I would stay away from this product it only works part of the time definitely not worth the price
|
How many cups of food does this pet feeder hold?
|
I don't know. But I know it holds an entire small bag of dry cat food. This really is a good product. Once you get the feeding times programmed the only thing you have to do is refill the recepticle and occassionally clean out the feeding tray.
|
How many cups of food does this pet feeder hold?
|
I filled it about 2 weeks ago and it's still 2/3 full, so holds a lot. My cat gets 3/4 cup per day. I'm not sure of the exact amount, but it will probably go about 5 weeks between fills with him getting 3/4 cup per day.
|
How many cups of food does this pet feeder hold?
|
I don't really know the exact answer, but I feed my dog 2 1/2 cups a day and it last at least 7 days up to 10 days. I refill it every weekend so don't know th exact amount for you.
|
How many cups of food does this pet feeder hold?
|
I poured a whole bag of food in it & it was only 1/2 full. I returned it bcuz it didnt work properly. Good luck
|
Is there choice of wood options at additional cost? Current picture and what you represent is Pine correct?
|
This is the only color that this table is made in. The color is a darker pine color
|
Is the battery on these user replacable? Anyone having issues with the battery not lasting as long as hoped or as advertised? Thanks!
|
The battery life is as described. So far, I have not had to recharge it and I have used it for over a week straight for at least 1-2 hours a day.
|
Is the battery on these user replacable? Anyone having issues with the battery not lasting as long as hoped or as advertised? Thanks!
|
Yes. My battery died after 2 months of use, and I'm looking for a replacement one now.
|
Does the handlebar length adjust at all.
|
As it is stock, you cannot adjust the bar height. But with a $30 Delta riser, you can raise the bars about 3". I wouldn't suggest raising the bars more than that. Also, if you go more than that, you will need to replace all the cables to accommodate the extra height.
|
does anyone know the height of the seat? I want to make sure they'll work with my table.
|
I live in the frigid North and ,y lawn furniture is folded up in the shed. This basic information should be listed as part of the description of the product at Amazon. If it is not I suggest you request it from them. If your were pruchasing this chair from a brick and mortor store you could easily get the measurements. If Amazon can't provide a detailed product description I suggest you shop locally.
|
Can this device charge an Ipad Air?
|
Yes - easily. The Tenergy battery stick is elegant, adds about 35 hours, and is easy to use.
|
Can this device charge an Ipad Air?
|
Yes, indeed, it can, Marc. The onboard cable has the lightning connector. There is also a micro USB cable built in as well as a micro USB plug.
|
Can this device charge an Ipad Air?
|
The iPad Air uses a 8827mAh battery. The Tenergy ARC5200 only provides 5200mAh of power. So to answer your question- Yes it can charge an iPad Air to approx. 58% capacity. If you want a device that charges the iPad Air to full capacity, you need to look elsewhere.
|
Suitable for daily pouring of milk? I am using the half gallon jars to freeze milk and it would be convenient to just switch caps
|
The top seals tight (and it can be a little hard to remove), but the cap isn't great for pouring; it has the dribble problem. I use it as a top for a salad dressing, and you have to be careful when you shake it (you have to hold your thumb on it, otherwise you'll be covered in salad dressing).
|
Suitable for daily pouring of milk? I am using the half gallon jars to freeze milk and it would be convenient to just switch caps
|
Yes, it would work for daily use. I use it on my water kefir which I use daily as well. The only negative is the flip top doesn't stay open, it will flip back to the closed position when you pour which can be messy. To remedy this I just hold it open with a finger. :-)
|
What are the sizes of the external pockets? will they fit large phones (phablets) like an iphone 6 plus or samsung note 4? (roughly 6" x 3")
|
I think so....they seems big enough. I have S4 and there about 2 inches of space left after I put in there.
|
What are the sizes of the external pockets? will they fit large phones (phablets) like an iphone 6 plus or samsung note 4? (roughly 6" x 3")
|
I have a Note 4. It will fit in the front external pocket but not the pocket on each end. The external pockets are pretty small.
|
Does it have a mate finish?
|
At first it'll be a little odd on touch, but after a brief period it'll smooth out and remain very clear.
|
Mosquito heaven: Is there some way to prevent mosquitos from accessing the water to lay their eggs in?
|
Yes, there are mosquito rings that can be purchases. It releases bacteria into the water killing the larve
|
Will this tripod work with a Simmons 20-20/60mm Blazer Spotter Scope sold at Walmart?
|
Yes it should as long as the Simmons has the 1/4-20 threaded base. it works with my Redfield Rampage 20-60 X 60 mm
|
Will this tripod work with a Simmons 20-20/60mm Blazer Spotter Scope sold at Walmart?
|
I am not sure about the specific item you want to use it for, but I use it for a Canon dslr T4i and it barely handles it. Once I use my telephoto lens it gets a little too heavy for the tripod. For the price it is great, but you will get a great, light duty tripod. I hope this helps.
|
Will this tripod work with a Simmons 20-20/60mm Blazer Spotter Scope sold at Walmart?
|
The tripod should work if the Simmons scope has the standard mounting fixture. My Kowa 88mm scope works fine.
|
Is this Air Play enabled? In IOS, can I stream anything, or does it only stream from the apps that the Phorus ios app supports?
|
No, unfortunately it isn't. You can play the music you have stored on your iPhone or Android, from media servers, Pandora and preset radio stations (btw, lots of them and good ones). You cannot play Beats Music and other online music providers
|
Is this Air Play enabled? In IOS, can I stream anything, or does it only stream from the apps that the Phorus ios app supports?
|
You have to be in the Phorus app to use the receiver to control other Phorus speakers, however you can connect this to the aux in jacks in your stereo receiver and stream from any app using Bluetooth.
|
Does this fit the PRO Model AA electric knife
|
yes the shark blades fit the pro model as well as the old ULTRA saltwater series by AA I like the shark blades !
|
I need to get the chairs for the 10 tables I ordered. I did not realize it was the table alone.Please tell me how I can order the chairs asap
|
These chairs are available individually. The model number is D290DC. Thank you for your inquiry. Beyond Stores. 888-349-6096
|
I am looking to order this. I want it to sit in my office. It will get some sunlight through the window and that is about it. Will it survive?
|
Yes, we ordered this same bonsai for my son's girlfriend. She keeps it in her bedroom and it has done really well. She has had it almost 2 years.
|
Does it have retinyl palmitate in the ingredients?
|
As far as I know, there isn't such ingredient like this written on the list of ingredrients.
|
Can you toe nail all the way into the wood or does it leave part of the nail sticking out, to be finished with a hammer?
|
Yes it will nail it all the way. Sometimes it stops before the nails are flush, but just line it up on the head of the nail again and hammer down. It will work.
|
Can you toe nail all the way into the wood or does it leave part of the nail sticking out, to be finished with a hammer?
|
You will likely have to finish with a hammer if you need a toe nail to be flush. Otherwise a great product to use for tight spaces.
|
Can you toe nail all the way into the wood or does it leave part of the nail sticking out, to be finished with a hammer?
|
it drives ever nail quicker and better than a hamer, run at 100 psi, this will drive a nail in places you would never get a hamer, it is worth every penny.
|
Can you toe nail all the way into the wood or does it leave part of the nail sticking out, to be finished with a hammer?
|
I'm a master carpenter/contractor for many years. Typically - when you toenail - either by hand or with a framing gun - the nail head does not seat all the way into the 2 x 4/6/8/10 whatever. The reason to have a palm nailer is primarily to nail joist hangers and joists to rim joists since typically a framing gun won't fit between the joists and it is very hard to hit the holes in the joist hangers with a framing hammer. The whole idea is to be able drive nails in framing where space is tight. The palm nailer will drive the nails into framing stock to an acceptable point but is does not bury the head of the nail which isn't really neccessary. I'm a master carpenter/contractor for many years. Typically - when you toenail - either by hand or with a framing gun - the nail head does not seat all the way into the 2 x 4/6/8/10 whatever. The reason to have a palm nailer is primarily to nail joist hangers and joists to rim joists since typically a framing gun won't fit between the joists and it is very hard to hit the holes in the joist hangers with a framing hammer. The whole idea is to be able drive nails in framing where space is tight. The palm nailer will drive the nails into framing stock to an acceptable point but is does not... » Read More I'm a master carpenter/contractor for many years. Typically - when you toenail - either by hand or with a framing gun - the nail head does not seat all the way into the 2 x 4/6/8/10 whatever. The reason to have a palm nailer is primarily to nail joist hangers and joists to rim joists since typically a framing gun won't fit between the joists and it is very hard to hit the holes in the joist hangers with a framing hammer. The whole idea is to be able drive nails in framing where space is tight. The palm nailer will drive the nails into framing stock to an acceptable point but is does not bury the head of the nail which isn't really neccessary. « Show Less
|
My bike currently has a 160/80 B16 tire ont he rear. Will these tire work as a replacement?
|
Yes, 150 is the width of the tire, sidewall to sidewall, in millimeters. I don't know if your original tire is oem or not, but if you do go larger than oem it's good to check with a knowledgeable mech for that bike or the manufacturer. Don't know what the "B" is ...that's not a designated speed rating. Sure it's not a P or R, that would be 93 or 106 mph respectively. Meaning at maximum tire pressure and maximum load on the bike that would be highest safe recommended speed. I believe the speed rating on these tires is 100 or 110, either way, fast enough! Good Luck and Paint Up!!!
|
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.