query
stringlengths 20
2.05k
| answer
stringlengths 75
2.05k
|
|---|---|
Hello, what lancets are used with this lancing device? Can you give me specific brands and sizes for the least painful pricks?
|
I'm using ReliOn 33g ultra-thin lancets. The stick isn't bad and the price point is good.
|
Hello, what lancets are used with this lancing device? Can you give me specific brands and sizes for the least painful pricks?
|
I tested it with Arriva and ReliOn lancets, though I think any standard lancets should work just fine. As for sizes, you'll want no thicker than 30 gauge (32 gauge is thinner, but can bend easier while 26 gauge is thicker and more painful). For getting less painful pricks, aim for the sides of the fingertips and not the front of the fingertip itself (that is where all the nerve endings are). Some devices support alternate site testing, but your most accurate reading will always come from the blood in your fingertips first.
|
How long can it be off and maintain temperature in the fridge?
|
I would not recommend this cooler. I got it for trips in the car and it failed miserably. The salad I was supposibly refrigerating was warm at the end of the trip. Seemed to work when I tested it but failed sometime during the trip. Have not used it since.
|
How long can it be off and maintain temperature in the fridge?
|
I'm sorry dear, but I didn't purchase this fridge to experiment with it, I need it to keep my two insulins cool. Why would you need to turn it off? Are you transporting foods? Perhaps you should check out the DC switch and whether there is a transformer adapter you could use in the car. That's only a guess, since I use this for home use (A/C) only. I hope this helps you.
|
I have a cast on my foot that goes up to my knee and my toes are exposed. Do you think these socks would fit over my cast?
|
I am not sure if they will fit over a cast. There must be special socks for that. Search on amazon, google or ask your medical professional.
|
I have a cast on my foot that goes up to my knee and my toes are exposed. Do you think these socks would fit over my cast?
|
Normally, the sock goes a bit more than halfway up the calf (it measures 10" from the heel base to top of sock - my husband wears a 15 5x shoe). I just measured one sock to see how much it will stretch and it stretches 21"+, almost 22". So if the circumference of your cast does not exceed 22", this sock should at least cover your foot part way up your calf. I suggest you get a string, wrap it around your cast at 8" from the heel and see what kind of measurement you get. If not greater than 21- 22" you should be fine.
|
I have a cast on my foot that goes up to my knee and my toes are exposed. Do you think these socks would fit over my cast?
|
These socks are excellent! They have plenty of room, are VERY comfortable with plenty of elasticity! I have a very big, wide foot and large legs. I am 6'5" and weigh 260. These socks come up to my knee. I will continue to use these socks.
|
I have a cast on my foot that goes up to my knee and my toes are exposed. Do you think these socks would fit over my cast?
|
I am a women and I bought the men's smaller size. Don't know how big you are, but you might want to get the biggest men's size to fit over your cast and toes, they do stretch.
|
How does this pot fit on a regular electric coil stove? I am love the height for qt jars, but the width seems huge.
|
I do not have an electric coil stove but the Diameter of the pot is 16 inches. If you have an electric coil stove I would use a tape measure to determine how 16 inches would fit on the stove.
|
How does this pot fit on a regular electric coil stove? I am love the height for qt jars, but the width seems huge.
|
I use mine only to brew beer outside on a gas burner, My burner is like one that is used on a turkey oil cooker. I don't think it would fit real good on am electric burner on a range top due to it's large size. But since it does have a clad bottom the heat should transfer well anyway. To see how it would fit cut you a string Half the width of the pot. With your burner cool to the touch and off. Hold one end of the string in the center of the burner, Pivot the other end of the string around the burner in a circle motion. This will show you how much the pot will over hang your burner or if it will even fit on your range top. You would want to center the pot on the burner for best results. I use mine only to brew beer outside on a gas burner, My burner is like one that is used on a turkey oil cooker. I don't think it would fit real good on am electric burner on a range top due to it's large size. But since it does have a clad bottom the heat should transfer well anyway. To see how it would fit cut you a string Half the width of the pot. With your burner cool to the touch and off. Hold one end of the string in the center of the burner, Pivot the other end of the string around the burner in a circle motion. This will show you how much the pot will over hang your burner or if it... » Read More I use mine only to brew beer outside on a gas burner, My burner is like one that is used on a turkey oil cooker. I don't think it would fit real good on am electric burner on a range top due to it's large size. But since it does have a clad bottom the heat should transfer well anyway. To see how it would fit cut you a string Half the width of the pot. With your burner cool to the touch and off. Hold one end of the string in the center of the burner, Pivot the other end of the string around the burner in a circle motion. This will show you how much the pot will over hang your burner or if it will even fit on your range top. You would want to center the pot on the burner for best results. « Show Less
|
How does this pot fit on a regular electric coil stove? I am love the height for qt jars, but the width seems huge.
|
I use mine only to brew beer outside on a gas burner, My burner is like one that is used on a turkey oil cooker. I don't think it would fit real good on am electric burner on a range top due to it's large size. But since it does have a clad bottom the heat should transfer well anyway. To see how it would fit cut you a string Half the width of the pot. With your burner cool to the touch and off. Hold one end of the string in the center of the burner, Pivot the other end of the string around the burner in a circle motion. This will show you how much the pot will over hang your burner or if it will even fit on your range top. You would want to center the pot on the burner for best results.
|
How does this pot fit on a regular electric coil stove? I am love the height for qt jars, but the width seems huge.
|
I use it on a gas range that has cast supports that span two burners. Not sure if it would balance on one or two coils. Also takes both gas burners to get a good boil going.
|
Where are these made?
|
I'm sorry, we didn't keep the package the strainers came in so we can't help. My guess (the best I can do) is this product is imported from "who knows where".We always thoroughly wash all new food prep items before we put them to work in our kitchen for the same reason we launder new clothing items before wearing, one can't know what anything has been in contact with during the manufacturing process regardless of where it is made. Better to be safe than sick!
|
Does this amp come with a remote bass knob? I want to be able to control it from the driver seat.
|
Get the Brutus model then the remote that this amp uses is for bass boost not gain like the Brutus plus this amp is 600 watts RMS the Brutus will be 1200 watts RMS idk y they rate the zues in max and the Brutus in RMS
|
What makes it cyst-reducing?
|
I am not totally sure, and I did not make the claim, but I believe that cysts are relatively large and would be caught in the filter.
|
Can you wash these with cotton? I read microfiber shouldn't be washed with cotton...
|
I've thrown my towel in with the rest of my laundry, it seems to be doing just fine. : ]
|
Is the silicone element only on the thumb/finger portion or is the entire outside of the glove silicone?
|
gloves are spectacular, are completely silicone and inside are padded, very comfortable, buy the recomieno is 100%, greetings from Caracas Venezuela successes and blessings.
|
Is the silicone element only on the thumb/finger portion or is the entire outside of the glove silicone?
|
The entire outside of the glove is silicone. It can be used by right or left-handed cooks. I bought two gloves for when I need to remove heavy items from a hot oven. The inside is covered with a soft quilted material.
|
Is the silicone element only on the thumb/finger portion or is the entire outside of the glove silicone?
|
The entire glove is silicone and it protects the entire hand, wrist and distal forearm. My husband and I both like the product very much. It works well and cleans up easily.
|
does this stereo have subwoofers settings?
|
The only subwoofer setting it has is off or a volume level of 1 through 12. That volume level only affects the subwoofer and you can change it while driving. You press the dial in until you get to the subwoofer option and then spin it to turn the volume of the sub up or down. Hope this helps.
|
Why would the oil leak out of the container soaking in hot water? The bottle is new and the lid was on tight. You are supposed to heat this up to liquify, right?
|
It may be that there was oil up to the rim and when you melted it down it seeped out. you don't necessarily have to heat it up, if left out in a regular room temp. it will loosen up enough to come out, and it will loosen further in the heat of your hand.
|
Why would the oil leak out of the container soaking in hot water? The bottle is new and the lid was on tight. You are supposed to heat this up to liquify, right?
|
I think the lids don't always work well, especially when it comes to those cheaper items. Try keeping the bottle upright when it is in hot water, it generally melts pretty fast.
|
Is it ok for apple mac computer for fashion design?
|
CorelDRAW Graphics Suite X7 only runs under Windows 7 or 8. So to run it on a Mac you will need to run Windows on your Mac.
|
1-My projection distance is fixed at 20 feet and I have a 100 inch screen. Is it possible to adjust the zoom to cover only 100 inches?
|
Not even close. Per Optoma's website, this projector has only a 1.2 zoom. If you need to be that far back and display that small of a screen, your choice of projectors gets very small--perhaps nonexistent. I have an older Panasonic with a 2.0 zoom, and I can display 110" from over 17' away. But even my projector would only go down to 120" at 20 feet. You need a bigger screen!
|
1-My projection distance is fixed at 20 feet and I have a 100 inch screen. Is it possible to adjust the zoom to cover only 100 inches?
|
More than likely not. We are about 12 feet back and can just focus on our 130" screen.
|
1-My projection distance is fixed at 20 feet and I have a 100 inch screen. Is it possible to adjust the zoom to cover only 100 inches?
|
I would call their tech support. I bought this projector and LOVE IT. I called them with the screen size and the distance and they told me exactly where to place it and how far down it had to hang.
|
Does it allow use of ear phones?
|
Yes - see image 5. There are access holes for earphones on the back side of the armband.
|
How to get group messaging to work with walmarts family mobile??
|
Hi, this seems to be a more related issue with your WFM (Walmart Family Mobile) service than something to do with the BLU device. I just did some Goggling and found the following results: http://forum.xda-developers.com/showthread.php?t=2627013 , here they suggest to make sure your APN settings are correctly set up: mms apn -> web.omwtoday.com mmsc -> wirelessfour.mmsmvno.com/mms/wapenc proxy -> 216.155.165.50:8080 Also: https://www.myfamilymobile.com/Support/DeviceSupport/DeviceSupport.aspx?supporttype=TROUBLESHOOT ; check your Limits and Controls. Hope this info. helps you to sort out your issue. Consider the BLU device as any Android device, when setting up parameters. One more thing, make sure you're enabling 3G data on the right SIM port on this device. And to be the main SIM to be used for calls and texting. You'll find this in Settings menu. Users interface varies depending if you have updated to latest Kit-Kat Android V 4.4 or you're still in original Android Version V 4.2, but both version are able to control this settings.
|
What voltage comes out of the power supply? From the picture it looks like the power supply connects to the panel with a 3.5mm jack. Is that right?
|
The power supply is part number PCT-25S350U and says it is a class 2 power supply. According to the label the input is 100-240VAC, 0.23A 50/60hz and the output is 22-54vdc, 0.35A. I can't confirm if it is a 3.5mm jack but it looks like one.
|
how does it turn on & off?
|
There is a lever that it comes with that replaces the slide release lever that's already on the firearm, the new lever is also the on/off switch, it's ambidextrous, which ever side you push in to turn on, push in on the other side to turn off...
|
how does it turn on & off?
|
The off on button is in the slide release that comes with the laser. Push side to Side.
|
how does it turn on & off?
|
It comes with a takedown lever that replaces the factory one and has a small button on the side of the lever that you press in to turn it on and press back again to turn it off. It's really easy to install.
|
how does it turn on & off?
|
You replace the slide release with a new part that has a button on it that slides either way with the center being off so you can turn it on with the index finger of either hand. It works well and is easy to turn on.
|
how does it turn on & off?
|
It has a 3 position switch that replaces the existing take down lever. Center is off, push to right or left to turn on."Ambidextrous switch in custom take-down lever"
|
how does it turn on & off?
|
By depressing a button on the replacement part beneath the barrel. You can depress the button from either side.
|
Does this product contain red rice yeast?
|
No. The ingredients list from their web site is: INGREDIENTS: Plant sterols/stanols (Pine Tree), Sunflower Oil Esters, Gelatin, Pantethine, Glycerin, Medium Chain Triglycerides, Water, Soy Lecithin, Colors Added.
|
Does this product contain red rice yeast?
|
No, red yeast rice (sometimes referred to as a "natural" statin) is something altogether different. Some take it instead of statins. You should probably not take it with either Cholestoff or a statin drug, and you should talk to your doctor before taking red yeast rice.
|
What is the difference between Igora Royal Permanent Hair Color 5-00 Light Brown Forte 2.1 oz. and Igora Royal Permanent Hair Color 5-00 Light Brown?
|
The light brown is 5-0 not 5-00 and is more of a golden brown. The light brown forte 5-00 is a darker brown.
|
What is the difference between Igora Royal Permanent Hair Color 5-00 Light Brown Forte 2.1 oz. and Igora Royal Permanent Hair Color 5-00 Light Brown?
|
The difference is the forte is Spanish for strong and it's for colouring grey hair and is slightly darker and the 5-0 is your reg light brown
|
What is the difference between Igora Royal Permanent Hair Color 5-00 Light Brown Forte 2.1 oz. and Igora Royal Permanent Hair Color 5-00 Light Brown?
|
This might help visually. This is a color chart of Schwarzkopf: http://www.sleekhair.com/9725.html
|
Are the doors and drawers functional? Do they open?
|
They are suppose to open and close, If I can find out without destroying the package, I will let you know in a little bit.Cheryl, Cheryl's dolls
|
Are the doors and drawers functional? Do they open?
|
They are suppose to open and close, If I can find out without destroying the package, I will let you know in a little bit. Cheryl, Cheryl's dolls
|
Is this a Griffin product?
|
Yes! 100%! I bought this case to protect my daughter's iPad. She has autism and tends to be rough with electronics. This Griffin case gives the iPad great protection and I highly recommend. (There is a very slight gap between the iPad screen and screen cover, but it's no big deal at all. It just took a little while to get used to.)
|
Is this a Griffin product?
|
It came in a Griffin box, but on the back it has the "G" griffin logo but it does not say Griffin under it like some I've seen. However, it holds up great. I took it to the beach and it was sand proof like it said, so I am happy with the product
|
Is this a Griffin product?
|
You know that is a good question! Amazon gas a Griffin company area, it's like ordering straight from their inventory. So please navigate to that area and order yours so that you know your not ordering a knock off. Some people have learned that they received a knock off and when they thought they had the real thing.
|
Is this a Griffin product?
|
Yes it is. It does a great job protecting our iPad from six-year old twins. Plus it's so bright I can usually find wherever they've left it.
|
Hi, a question about this produkt. I want to buy the Garmin Zuno 660 lm. Is in the menu of the GPS the Greek language included? Thank you,
|
I have have a 665, but I am sure the 660 is the same. There is no settling for Greek..
|
Hi, a question about this produkt. I want to buy the Garmin Zuno 660 lm. Is in the menu of the GPS the Greek language included? Thank you,
|
Here's a video that might help http://www.gpscity.com/videos/play/uahlSzPKsjw Also, according to this website http://www.tramsoft.ch/gps/garmin_zumo660_en.html the answer is yes. I agree with what was said earlier, call Garmin to confirm.
|
Hi, a question about this produkt. I want to buy the Garmin Zuno 660 lm. Is in the menu of the GPS the Greek language included? Thank you,
|
Here's a video that might help http://www.gpscity.com/videos/play/uahlSzPKsjwAlso, according to this website http://www.tramsoft.ch/gps/garmin_zumo660_en.html the answer is yes.I agree with what was said earlier, call Garmin to confirm.
|
Is there any quick way to adjust for different thicknesses of the stones?
|
I have never been too concerned about the different thicknesses of the stones. True, it will make some difference, but I still have great success. I would be mindful of over compensating. Best wishes to you and I hope you have great success.
|
Is there any quick way to adjust for different thicknesses of the stones?
|
All the hones I have are diamond hones, witch are the same thickness. I think just about any stone the same size, but different in thickness will work.
|
Is there any quick way to adjust for different thicknesses of the stones?
|
You should have no problem using Diamond stones as they are very close to being the same thickness. On the other hand, ceramic stones are another matter. I would suggest you acquire a digital angle gauge like the "AccuRemote" which you can purchase through Amazon.com for around $30.00 which will aid in resetting your desired cutting angle for the different grits.
|
Is there any quick way to adjust for different thicknesses of the stones?
|
Use a digital angle finder to readjust the rod angle if you have stones of different thickness. Not an issue with the diamond stone kit, the diamond stones are all the same thickness
|
What kinda clip dose it have? Like Velcro, Attach to belt, Clip on Clip off, Ect. If you get what i mean
|
It is a paddle holster-you slide it down into pants between paddle part and holster. Holster hangs outside of pants.
|
What kinda clip dose it have? Like Velcro, Attach to belt, Clip on Clip off, Ect. If you get what i mean
|
The "paddle" slides inside your waistband, belt is not required to use this holster. Gun held tightly into place by tension around trigger guard, will not come out accidentally.
|
What kinda clip dose it have? Like Velcro, Attach to belt, Clip on Clip off, Ect. If you get what i mean
|
It has a paddle holster. I tried it with some athletic shorts on just to see if it would sag. Surprise..Surprise... it held flawlessly, kept the weapon close to my body and I didn't have to over tighten the athletic shorts. Best paddle holster I have ever owned. Sorry for the novel, I hope my response helps.
|
What kinda clip dose it have? Like Velcro, Attach to belt, Clip on Clip off, Ect. If you get what i mean
|
This is what is known as a "paddle" holster. A portion of the holster fits inside your trousers and the main portion is outside. The Paddle on the inside provides the friction to keep the holster in position. It is an "easy on-easy off" type of arrangement.
|
FTA TV: Can somebody get me started on the right track?
|
It would probably be easier/cheaper to just use Over The Air digital TV signals if you are fine with only the networks and independent stations. FTA is harder to use if you're moving this trailer around, and cheaper either way as an antenna is much cheaper than a dish and receiver.
|
Is there a list of camera's it works with?
|
It kind of works with any camera that does not require special software to access its images. It creates WiFi server using the mass storage driver from the card the storage works like regular card for the camera it creates its own network AP for you to access I have not played with it too much I have not figured out if it can be used on existing network as a node but documentation says it can be done along with push that I have not tried either.
|
Wil these fit on a puppy apartment by Modern Puppies?
|
I don't know but they grip around the intersecting length and width supporting wires so I would think they could fit any wire bottom crate with wire of a similar gauge. They are well made and not very difficult to install.
|
Can this umbrella be used on a Hot Dog Cart?
|
the size of this umbrella is only for a standard yard table. It might not give you the coverage you are looking for.
|
is the battery rechargeable? what is the battery life on this battery? does it come with a camera strap? will any sd card work in this camera?
|
The battery is rechargeable and lasts for approximately 300 shots. I think the battery life is effected by the amount of times you zoom in or out since the lens is operated via the battery. The camera comes with a very nice camera strap. A standard size sd card (not micro) works in the camera. Hope this helps!
|
is the battery rechargeable? what is the battery life on this battery? does it come with a camera strap? will any sd card work in this camera?
|
Yes, the battery is rechargeable (a recharger comes with the camera) and the user manual says it work for 300 photos. The camera strap comes in the box. Im using a SD bought at Target ( I don't remember the brand, but it costed about 17 dollars). I bought a kit that is very worthwhile for approximately $ 30 that comes with a battery, a charger to use in cars, a case that fits the camera and accesories, a tripod, the strap for the case etc.
|
is the battery rechargeable? what is the battery life on this battery? does it come with a camera strap? will any sd card work in this camera?
|
Yep the battery is rechargable, it has a charging station supplied with it, neck strap is also supplied with the camera, I took about 300 shots with the camera before switching to the second battery I bought, SD card can be an SD/SDHC/ or an SDXC (UHS-I).
|
is the battery rechargeable? what is the battery life on this battery? does it come with a camera strap? will any sd card work in this camera?
|
Yes, the battery is rechargeable (a recharger comes with the camera) and the user manual says it work for 300 photos. The camera strap comes in the box. I´m using a SD bought at Target ( I don't remember the brand, but it costed about 17 dollars). I bought a kit that is very worthwhile for approximately $ 30 that comes with a battery, a charger to use in cars, a case that fits the camera and accesories, a tripod, the strap for the case etc.
|
is the battery rechargeable? what is the battery life on this battery? does it come with a camera strap? will any sd card work in this camera?
|
1) The battery is rechargeable. In fact, it comes with a battery wall charger.2) Based on my experience, it would last from 1.5-2 days, with about 300-400 photos. I didn't use much flash though.3) It comes with a strap.4) I'm currently using a Sandisk 64GB MicroSDXC Ultra Class 10 with an adapter and everything's working out fine so far.
|
Will this quick release plate work for a Kodak Gear tripod?
|
i bought one but the diameter of the screw on the plate was too large for the camera. i i recall correctly the plate was 1/4" and if i remember right, it should be 3/16. just be careful to pick the right size.
|
Will this quick release plate work for a Kodak Gear tripod?
|
If it comes with both the base plate and camera plate, you should be able to mount these on any tripod base. You may need a hex key (allen wrench) or torx etc.. but shouldn't be problem. I switch these things out often...www.mcintoshmountains.com
|
Will this hold a 3 mm bead so I can Polish it with the Dremel? I need something to hold bead while using Diamond polisher.
|
In my opinion, this device is not made for such a small, precise hold. I would never say " no way" .... But doubtful
|
Will this hold a 3 mm bead so I can Polish it with the Dremel? I need something to hold bead while using Diamond polisher.
|
I doubt that your polishing head is less than 3mm wide, and if I am correct, it would not fit between the two side of the vise when they are closed on you bead. I think gemnologists use a tool called a "tumbler", basically a rotating can filled with abrasives, that polish small stones.
|
Will this hold a 3 mm bead so I can Polish it with the Dremel? I need something to hold bead while using Diamond polisher.
|
if your bead has a hole, put a straight pin in it and clamp the pin; or put a wire or strong thread through the hole and clamp it that way. If no hole put the bead in one of the grooves of the soft jaws and have about half of it stick out to polish.. rotate the exposed part as needed. As a Dr., if you have access to ring (sponge) hemostats, you might use them to hold the bead and clamp them into the vise.
|
is the version made in Mexico? has the version made in Mexico?
|
The generic bulb I recieved was made in China. I sent it back, cause it flickered like a strobe light. I then spent the extra money and purchased a Mitsubishi factory bulb with the housing and it was made in Mexico, had to adjust the brightness back down after install the factory bulb. You get what you pay for. Bulb still going strong.
|
Should a rack be used with these briquettes or do you just spread them out on the bottom of the grill?
|
they shoiuld be used on top of a rack with the gas burner located below.......hope this helps
|
Should a rack be used with these briquettes or do you just spread them out on the bottom of the grill?
|
elow your grilling rack, there should be a lower rack that sits atop the burner unit. This lower rack is where the briquettes should be placed.
|
Should a rack be used with these briquettes or do you just spread them out on the bottom of the grill?
|
I've done both and it works fine. Just make sure if you put them around the burner they don't impede the flame or gas flow. This can cause hot or cold spots and/or difficult lighting.
|
How is the material on top for writing purposes? I'm a little concerned about writing utensil going through paper. Thanks for any info you can offer
|
It's fine. I have no problems the desk is very sturdy and well put together. Hope this helps
|
How is the material on top for writing purposes? I'm a little concerned about writing utensil going through paper. Thanks for any info you can offer
|
It is slightly a rough surface. I would recommend that use a hard surface under your paper before writing. It is a beautiful addition to any room. I really like it. It looks expensive. You would like it.
|
How is the material on top for writing purposes? I'm a little concerned about writing utensil going through paper. Thanks for any info you can offer
|
There is a slight texture on the top of the desk that makes it challenging not impossible to write. The thicker the paper the better.
|
How is the material on top for writing purposes? I'm a little concerned about writing utensil going through paper. Thanks for any info you can offer
|
I tested it and you can write but the material of the map on top of the desk is slightly bumpy. I use a desk mat on my desk's top to keep it scratches that will happen over time. You might want to do the same if you purchase the desk.
|
These use mx blues right?
|
I bought it a while ago and from this one I got the mx blues. I do not know if it has changed but the ones I am using from when I got this from a few months ago is mx blues. "Razer Black widow Ultimate 2013 Elite Mechanical Gaming Keyboard" is what is says under product description. I am going to say they are MX blues but not 100% sure. 2013 are mx blues anyways. Hope this has helped you.
|
Is $149.99 for two speakers?
|
That's the price for one speaker. I bought it under the assumption I was buying a pair of speakers, but had to buy another one separately to get the pair. Expensive, but excellent speakers. We've also had a pair of floor-standing Boston Acoustics speakers for over 30 years and they still sound great.
|
Is $149.99 for two speakers?
|
Unfortunately, no, it is for only ONE speaker so you are looking at about $300+ for the pair (depending on taxes and shipping)
|
Is $149.99 for two speakers?
|
$149.99 is the per speaker price. So, two will cost you $299.98. Over time, I have purchased 4 of them. Worth every penny.
|
Does this come with the bolts?
|
Nope. Just go to hardware store and purchase 10mm fine thread bolts. Also use lock tight on bolts so they won't vibrate off. I just purchase the plastic pull start because the metal. Recoil throw plunger thing stop working. Lasted one month.
|
Does this come with the bolts?
|
It has been a long time since I bought it but I don't believe it came with the bolts
|
Does this come with the bolts?
|
Nope. Just go to hardware store and get 10m fine thread bolts. Also use lock tight on bolts so they won't vibrate off. I just purchased the plastic pull start. Metal only lasted 1 month.
|
Does this come with the bolts?
|
I don't think it did you have to use the original bolts from the plastic starter that were on your bike
|
Is the headboard soft? Can you lean on it comfortably?
|
Never used it I tried d to return the item. I will never buy from them again.
|
Is the headboard soft? Can you lean on it comfortably?
|
Yes. It's is soft enough that you can sit in bed and lean up against it comfortably and sturdy enough that it doesn't wobble.
|
Is the headboard soft? Can you lean on it comfortably?
|
Yes, it is comfortable to lean on. I still put a pillow behind me though when I sit in bed to read.
|
On a curio cabinet, would you install it on the inside or the outside of the door glass?
|
I bought it to use on an older window of my house near a spa. By code, I had to put it on both sides of the glass due to a slip hazard that could cause someone to lose their balance and fall into the window. Sorry, I don't know how I would use it on a curio cabinet.
|
On a curio cabinet, would you install it on the inside or the outside of the door glass?
|
the film had to be install at the inside it make at easy and if glass is broken better to clean up and replaced
|
On a curio cabinet, would you install it on the inside or the outside of the door glass?
|
Depending on your situation, we have a 3 year old grandson running around and throwing balls and toys. I love him dearly and wouldn't want him to get hurt on broken glass should his homerun connect with our curio case. So we put it on the outside. If no children around and your getting up in age as we are and alittle less agile in cleaning your curios I'd put it on the inside. Once in place it's practically invisible. Good luck.
|
On a curio cabinet, would you install it on the inside or the outside of the door glass?
|
I never thought about installing it on the inside. If there is any chance of broken glass being exposed, I feel it would be safer on the inside.
|
What is diameter of burgers
|
I bought this for my daughter so I can't say exactly what the diameter is. The size of the burger is about right for a regular hamburger bun, just remember once cooked the hamburger will shrink some. Hope this helps.
|
Does it have an ON-OFF switch or is it always ON when connected?
|
I wish it had an ON/OFF switch, but it doesn't. You have to pull the power plug to power it down.
|
Does it have an ON-OFF switch or is it always ON when connected?
|
No on off switch, but goes to sleep 15 minutes after its used. Mine is connected to a Synology server via USB 3.0. It backs up every night at 1 am, so have not see it actually "on" in quite a while. Back ups run just fine and the log shows they are all there daily with no errors. Now the reason it is asleep is due to a setting in the Synology software. I could have it on all the time, but why? If I manually access the drive thru the Synology server it comes right up with no issue, AND is fast! Thats the best part. I would buy another if I needed one, no problem.
|
how many pages are in the book? ty
|
I don't know. I used it for a wedding ceremony book. It had enough pages for the couple's name and date of ceremony, signature pages for the bridesmaids and groomsmen as well as enough pages for the ceremonyand pages for signing by the guests. I would think 12-14 pages is close.
|
can I use this in a lenovo K450E
|
As I see your Motherboard support 16.0GB PC3-12800 DDR3 SDRAM 1600 MHz.I think you should go to kingston official web site and find memory tools compatibility.I have bad experience regarding personal decision depending on kingston site.Try use this page:http://www.kingston.com/us/memory/system_specific/desktop_notebookAll the best,Vakhtang
|
can I use this in a lenovo K450E
|
You need to google Kingston, get their number, and call them. Let them know what motherboard you have, then they will let you know if the FURY ram you're looking at will work or not.Remember, the motherboard, Ram, and processor all work together and must sync.
|
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.