Datasets:

---

embedding-data

/

Amazon-QA

like 2

Follow

Embedding Training Data 10

[ "Good question Doug. No special rings needed, you should be able to get the base and rings at your local Dicks Sporting Goods (or any other store that handles firearm accessories.) The important consideration is whether or not you want to still be able to use the iron sights...if you do, you'll need to purchase rings that let you look underneath the actual scope mount. These are called \"shoot thru\" rings. I do not recommend them but some hunters insist on being able to use the iron sights. Hope this helps! -Mike", "Nope you don't need any special rings just a scope rated for shotgun recoil.", "any good shot gun scope rings will work the important part is the recoil and how the scope hanles it , this simmons is a good choice for you if you like it", "You need steel rings AND a steel scope rail. You dont want any aluminum. It starts to shear with high recoil loads. I ruined an aluminum base in 10 shots on my .500 handi rifle, which is similar in recoil to a hot 12 gauge slug.", "dougI used the Accushot rings ( ordered from amaon) with a Simmons Prohunter shotgun scope. works great. no special rings rings required.", "No special rings just make sure you purchase them separate .Also, recoil on my 20 gauge is minimal." ]

[ "Yes, that's the reason I bought them. As long as one of the tips fit the refill fitting on your lighter. They will work.", "yes it does, it also has about five or six different attachments to fit different types of lighters." ]

[ "The answer is ... how do you want the light to attach to the picture frame? You can clip it on the the clips attached to the base of the frame or you can remove the frame base and use the wall mount for a more permanent installation. Either way it is simple as pie and gives one a good light. I use it for my craft shows to provide lighting when no plug in power is available. I found the light to be very nice and toward the end of the day when the other outdoor booths were dim ... my booth looks like the bright spot in the show. The lights give plenty of light for patrons to shop and see well.", "I can't answer about mounting on a frame because I modified the lamp to mount on a picture easel to display art works. Sorry", "The front two clips on the front clip to the front of your frame. The back part is what will hold on to the back of the frame" ]

[ "Sorry, I hit yes to your answer thinking it was an option to let me give me feedback back. I don't think the Broadway mirror will allow you to tilt up as a separate piece from standard mirror because once you clip it on the mirror is in a set position. I would recommend contacting seller see if there are add-ons you can purchase to get the mirror to tilt in the desired position. Hopefully that helps answer your question." ]

[ "Yes, I used one for my sleeping bag and it worked well. I would measure the diameter and length of your bag when rolled up or stuffed to get the correct size.", "I am not sure that would depend on what the temp rating is, as that determines size too. If you have the old sack you could try and determine it's size to find out. If you don't have many of these then I would buy one . I love them and use them to store everything inside my pack. They help compartmentalize and they will keep it dry too. I just looked at mine and I think the 13L would fit almost any down bag. You could always go 1 size bigger to be sure and if it's too big throw a camping pillow in too. :{)", "Yes, buy you'll have to get the right size. I used to use the Army water proof bag with a plastic bag inside of that and this is a much better option for water proofing. Depending on they type of sleeping bag you have (which I'm assuming is a \"mummy\" stuff bag and not one that rolls up with a wide opening) then you are good. The largest Sea to Summit will hold a -40 degree Wigley sleeping bag with a gortex cover. Fitting is important and too big or too small can be frustrating or waste room in a backpack - cheers and good luck!" ]

[ "In regards to your inquiry, the first flashlight I ordered was from MECO. I can't remember how that was packaged, but the flashlight was as described, adjustable and a flashing (strobe) light feature. It also had the brand Cree on it. I liked it so much I ordered 10 more. Although these look the same as the first flashlight, they do not have the strobe feature and we're not marked with Cree. Other than that they all seem to function satisfactorily and seem to be heavy duty." ]

[ "You get 2 rails, 4 legs. Have the legs at 7 but there is at least another 2 to unscrew and there are 4.5 inch extensions so -- you can go at least to the 14 inch range. Think the width will go to 75 but...they're on the bed at this time so we can't measure for you.", "2 rails per pack...they adjust easily, just screw up or down. I ordered 2 packs and used 3 rails of the 4 for my king bedThey adjust to whatever width you want." ]

[ "Yes, it does. It opens up in a little spot to allow you to use the power and volume buttons." ]

[ "It can be either low or high depending on what type of reflector you put it in. This bulb is used on cars that have four reflectors - two with high beam pattern and two with low beam pattern.", "When I purchased this i assumed it was Low beam and that's what it turned out to be", "Depend on the bulb type/number. I'm uncertain about an H7 bulb, as I use a model 9003 bulb - which has both a high and low beam filament. If your car has dual headlights (i.e. separate housings for high and low beam, like many European cars) then I assume the H7 is strictly low beam." ]

[ "The inner lip fits 10 inch pan, perfectly....Outer edge is slighty wider, but does not affect fit.", "All pans are measured to their outside edges, as many pans have curved sides and you have varying diameters to deal with. hth" ]

[ "90 pounds - we offer a free 1 year warranty beyond the manufacturerPhillips Health", "90 pounds - we offer a free 1 year warranty beyond the manufacturer Phillips Health" ]

[ "Yes, it should bright enough to light up the tank. Two things I have noticed since I have used them for a while, 1. fish can jump out of tank and 2. evaporation is higher than a sealed unit. I refill my water supply about every 2-3 days.", "It depends how deep your tank is, the light itself is bright and very directional the tank and the light must be the same size. To be honest I was a bit disappointed when I got mine, the blue LEDs are not strong enough in my opinion." ]

[ "Probably as they seem like 'universal' fit. They are pretty cheap to buy and I had to use some glue to keep them on.", "I can't say for certain if they will. If the ear cups on your headphones are round and not oval in shape these will not help you. This is the best advice I can give you. If your ear cups are oval why not give it a shot. The price is cheap enough and way less than the cost of new headphones of this type." ]

[ "Hello Kelly, not only will they work on Kindle Fire but, they also work on IPhone and Tablets, they are the perfect pen to have.", "I don't know. I got them for my Galaxy S4 phone. Says they are for everything, though.", "I really am not sure. It works for my Samsung Galaxy 4 and for my family's Ipods.", "It will actually! I gave one to my step mom and she has a kindle fire she uses the stylus with it all the time", "Yes the produc works very well, also I give to my family an everybody enjoy , cute colors" ]

[ "Yes it can do that. But, if the majority of your printing is text this is not the printer for you.", "Yes, you can use this to print plain text in black and white, but it is slow and uses expensive pigment inks. I use both a B&W; laser and an inexpensive dye-based ink jet on my home network for general printing. The Pro-10 is really a photo printer for pros and serious amateurs. I use it exclusively for photos.", "It prints 8.5 x 11 documents fine. Though, as costly as ink is for these types of fine art printers, I would probably just get a separate document printer (depending, of course, on how much document printing is required.)Like most other Canon fine art printers, the Pro-10 does have a \"black and White Photo Print\" mode which uses only the black and grey cartridges. It does a pretty good job at this and prints come out quite neutral.", "It prints letter size documents just fine, and yes it can be set to grayscale." ]

[ "Nope. This was not a good quality sword. I bought four, and they weren't even the same length. There isn't anything for the belt to catch on. I would go with a higher quality." ]

[ "What I received was one \"large\" box with 8 individual figurine boxes, 1 of the eight is a random extra figure. So you get everything in the picture plus an extra!", "Exactly as it appears in picture. There is a circular black stand that each figurine & smaller items clip into. We got this for our Professor Layton obsessed daughter.....she was over the moon. Even the packaging with little individual boxes for each figurine stored in one larger display box has a treasured spot in her room. Lovely gift for anyone who will appreciate it.", "I really don't have a answer for you because I have never order the Professor Layton prop plus pettit figurines sorry.", "The one that we got had an extra Claire in it, so we got 8 figurines and 8 small items on clips. There were one figurine and small clipped item in a box, and all eight of those boxes was in a larger box.", "Yes everything you see in the photo is included along with stands to hold up each figure and item. You will get an 8th extra blind figure. Mine came with an extra Layton with the car so there were 3 professors in my box.", "Yes. It comes with everything in the photo. 7 figures and then the 7 little items on clips. Each of the figures come in the their own little cardboard box with one of the clips." ]

[ "I would say no because they run a little small. My son wears a 12 and they are a little tight on him. Hope this helps" ]

[ "Yes, as long as the heater is not rated for over 5000 watts. Its a simple thermostat. One contact (2 wires) closes or opens by the heat setting and the other contact (2 wires) opens in the off position." ]

[ "Mounted it on my Remington 700 vtr .308 with a leupold 4x10x50 it's a perfect mount 1/2 in groups at 150yds" ]

[ "this does not come with any nipples. Just collars and caps and bottle tops.", "Tricia is correct. I will add that Medela does make an excellent slow flow nipple. Our daughter started on that, which then helped her learn to breastfeed." ]

[ "Not when I tried it. It worked horribly and I returned it immediately. If you have a 2wire and it isn't lighting up anymore it's most likely the adapter. The adapters have gone out for me 3 times so far when using an original adapter. I purchased a replacement from someone else a couple years back and it has not gone out yet so I'm guessing 2wire ones were horrible. Hope that helps." ]

[ "yes 2 of them ...I have textured walls and i just repress the lettering down as it pops up you just have to spend more time when you first do them on the walls...", "Yes they are, just an fyi, if your walls are textured they do not stick to the wall. I tried putting my words up and they would not stick." ]

[ "Yes you can use it on your back. I have used it on almost every part of my body. Lots of scares. The body takes longer to peel and heal than your face though. It takes anywhere from 3-6 weeks for the peeling to finish depending on how much of a peel you do.", "Theoretically - yes you could, but unless it's a very small area that's easy to reach, you would need a second person to help you apply it. And the aftercare would be difficult too. I can't think of any issues with skin on your back where a TCA peel would be your best option. Are you addressing skin discoloration, acne, KP? I've read of people using other peels (with help), but never TCA.", "One thing to be aware of is prematurely peeling the skin that is being forced to peel. Having clothing rub the skin or sleeping in your back may force the skins removal faster than it was ready. So precautions might be in order.", "Yes, it is a good strength to start with but do expect to do 3-4 peels and go up or down depending on the results of the last peels. Backs have tougher skin and usually take several peels to make a noticeable difference. I found this here:http://www.realself.com/question/tca-peel-back-acne-scars", "You can use it on your back but I would keep in mind the comfort level. The skin will be very tight after a couple of days and then split and start to peel off. Much like a sunburn but a little more tight and itchy. Your clothes will rub against it and you may have to sleep on your stomach", "Yes, it is a good strength to start with but do expect to do 3-4 peels and go up or down depending on the results of the last peels. Backs have tougher skin and usually take several peels to make a noticeable difference.I found this here:http://www.realself.com/question/tca-peel-back-acne-scars" ]

[ "Google - It looks like it's a method to get your email/address and then you receive samples, but according to this link, it's not very successful.http://www.fragrantica.com/board/viewtopic.php?id=36146" ]

[ "There is a Cannon app I use so I can see what I shot or what I am about to shoot on my iPhone and I have ability to share my shots from there. The camera connects directly to the app but you do need the internet connection from your iPhone to share. The camera uses bluetooth to connect but it is not a mobile device with own internet access. I hope I gave you the info you need. Good luck with it.. it is a fantastic camera... My iPhone 6 plus will be fun too but there is noting like a solid, capable DSLR in your hand :) with a great lens of course :)", "No...but you can download the Canon EOS app and easily transfer pictures and videos to your mobile device.", "I don't know if you can directly email photos via wifi. I have tethered it to my iPad to view live and also view photos and transfer directly to the iPad via wifi without wires." ]

[ "No rust problems and if your talking about a separate glass for shaking? No, you don't need a separate glass it comes with two cups (one big and one small) for shaking.", "stainless steel doesn't rust...but proper washing and drying will keep the metal shiny. the two metal shaker pieces fit one inside the other, as a typical boston shaker system does...so much easier to use than a martini shaker, the pieces of which can get too tight, making it hard to separate the top and strainer when your hands are wet or slippery.", "I don't know about the rusting just started to use mine. They fit inside each other for ease of shaking. Suppose you could still use a seperate glass if you felt the need like I was thinking of doing. Not a professional at this so don't know all the ropes yet.", "They do require glass, also mine have not rusted but have bent slightly... I have only used them a handful of times." ]

[ "1 cup plain rice, 45 minutes. Haven't tried more but probably won't take too much longer.", "Takes about 30-40 minutes regardless of number of cups, which is much longer than my previous Tiger cooker (which was also simpler rice cooker, about 15 minutes)." ]

[ "Yes, all foam products are flammable. This does meet California TB-117 regulations for flammability; however, the criteria by which it passes is because of the foams density and not because of any flame retardant chemicals which is good news." ]

[ "No, it is just the head board. I wasn't looking for one when I bought this piece, so I don't know if it is an option." ]

[ "The old version has a Intel Core 2 Dual processor 3.6 GHZ and the new version has a Quad-Core Intel Core i5 and the old version has a 500 GB ( 7200 RPM ) Hard dive and the new version has 1 TB ( 5400-RPM ) Hard drive which has twice the storages hat the old version has." ]

[ "It did come with a center cap too but I needed the open style for manual hubs. Not sure if it fits over the full floating rear hubs. I'll check later today.", "As long as you have the 9th generation body style I think Ford switched to the metric 8x170mm with the newer rounder body style. I have these on my 1989 f250 and they look great are light and a great price." ]

[ "seems solid to me, really well make 130 pounds assembled. Very happy with it. holds a lot of books" ]

[ "The clamp will accommodate a fairly thick bar oval or circle. It should accommodate your rollie with no issues!", "I have an oblong walker. It works ok but I did have to buy sightly longer screws and modify the assembly.", "I am not 100% sure. But the way it attaches is extremely versatile so I am confident it will attach." ]

[ "I use this to hold a 50-gallon water drum which is 24 inches in diameter, with about a quarter inch space between the dolly and the water drum. So I would say that it will hold anything that is 24-inches in diameter." ]

[ "I'm not sure what TG-83 is but assuming you meant TG-830 then the answer is yes, that's exactly what it's being used for." ]

[ "I don't see why it wouldn't, but we don't have Windows 8 on our computers so I can't be sure.", "Yes according to this http://logitech-en-amr.custhelp.com/app/answers/detail/a_id/32427/~/windows-8-support-for-logitech-mice-and-keyboards" ]

[ "GPS works well. Use it with Sygic offline navigation app all the time and in several countries.", "It does have a GPS built-in, however it does eat the battery so use it sparingly. It is very accurate too for a low priced Tablet.", "I haven't used it yet but I know I had the same nav on my phone and once it is downloaded you can use it it with or without WiFi connection.", "The GPS system works great. Sometimes I turn it to label the picture locations when I'm taking photographs. I also use it with Google maps. You can download a map and get voice turn by turn directions as long as you don't take a detour. Obviously it can't recalculate when you have no wifi connection. I like to use the GPS with a downloaded GoogleMap as a substitute for a roadmap (My car has a Tom-Tom, and if I don't know where I'm going, and I'll never get there, as the Tom-Tom tends to be Wrong-Wrong because its about 200ft off. ) So I often my Hisense as a GPS assistant and as a great portable roadmap. The GPS system works great. Sometimes I turn it to label the picture locations when I'm taking photographs. I also use it with Google maps. You can download a map and get voice turn by turn directions as long as you don't take a detour. Obviously it can't recalculate when you have no wifi connection. I like to use the GPS with a downloaded GoogleMap as a substitute for a roadmap (My car has a Tom-Tom, and if I don't know where I'm going, and I'll never get there, as the Tom-Tom tends to be Wrong-Wrong because its about 200ft off. ) So I often my Hisense as a GPS assistant and as a great... » Read More The GPS system works great. Sometimes I turn it to label the picture locations when I'm taking photographs. I also use it with Google maps. You can download a map and get voice turn by turn directions as long as you don't take a detour. Obviously it can't recalculate when you have no wifi connection. I like to use the GPS with a downloaded GoogleMap as a substitute for a roadmap (My car has a Tom-Tom, and if I don't know where I'm going, and I'll never get there, as the Tom-Tom tends to be Wrong-Wrong because its about 200ft off. ) So I often my Hisense as a GPS assistant and as a great portable roadmap. « Show Less" ]

[ "my foot size is 14, i got Large and they fit great, so medium should fit comfortably with out stretch(last longer). Hope this helps)", "Well my daughter is shoe size 8.5 / 9 in men and I purchased her a large and they fit her well..." ]

[ "It works on a lot of different types of plastic but not all. Hope this helps you.", "I use them on paper and labels, but have not tried them on anything else. They have been terrific for my needs, but think they might not be too successful on other surfaces. Cheers, Sydney" ]

[ "idk but i used this set in my mini van and it fit... but there a lot of tying to get them in there. but the colors are beautiful" ]

[ "7 1/2 inches on smaller shelf's, the main center shelf is 14 1/2 inches very nice unit for the price.", "They're smaller.Just kidding. They're about 6\" Bottom shelf is bigger. Wine rack is nice; holds six bottles.This thing has served us VERY well. You won't be disappointed.", "The bottom shelf is about 10 inches deep and the other three are about 6 inches deep.", "It is at my other house so I can't measure it right now. I am looking at a photograph and on the shelf below the wooden shelf, (below the wine rack) I have a stack of cook books laying there. They are laying with the spine toward the front of the shelf. It is a full sized cook book about the size of a magazine, so it appears that the shelf could be 9 or 10 inches deep. I'd be glad to send you a picture of it, but not sure that is possible. If there is a way of giving me your email we can try it.", "The top two shelves are 8 inches deep, and the bottom two are 10 inches deep.", "The wooden (middle) shelf is just under 16\" deep and the smaller shelves are 8\" deep." ]

[ "I bought this plant in March 2013, I did not split the plant, I let it as it is, now it has grown and all I do is change the water once a week. If you like you can split the plant, but I have read never to put four sticks together and tie, as four is a bad number is Chinese Language, I believe it means death. Other than that you should be oki. If you split it I think you have to tie with a metal string. I love my plant and if you have not got yours already you should... Good Luck...", "This arrangement was put together by a feng sui expert so leaving it together is how it its meant to be. That being said you could take it apart and arrange however you want just keep roots moist!", "Hi, you want to keep them together as a bundle. you can tie them with anything really, I used a decorative tie and they look really nice. Hope this answers your question. Enjoy them they are awesome, mine have gotten really big just after a few months.", "I split mine up and made gifts for friends ...........three in a bowl is good luck then I made a bowl for me of 21 which is perfect for all things. no you don't have to tie them together and you do need to give them a lot of water. all mine are thriving and beautiful. It is a great buy and I'll be getting more soon.", "I pulled my bamboo apart because I wanted to make party favors of \"lucky bamboo\" arrangements for my guest... I purchased small clear glass cubes from the $ store - put in 4 stems of bamboo (tied @ the base with florists wire) and filled bottom of cube with polished stones from the $ store - tying them around the middle with a small thin red ribbon - you could do almost anything with them - keep as one - split into as many or as few arrangements as you would like - have fun", "I did both. I took the first row off and put them in a different container. I tied something around them just so they would stand up. The bamboo floats. Fish go nice with the bamboo.", "you can keep together,or if you like,take one or as many as you like and tie them with string or leave them single.as long as roots submerged in water or in damp soil.Just don't let them dry out.try bamboo left together and getting some stones,place bamboo in a container with no hole.put stones around to top and fill with water will grow just fine.better than a houseplant.just remember the water.hope this helps.", "In the center of the bundle is a small PVC plastic pipe. All of the stalks are wrapped around it. You can keep them in the bundle as it comes or you can separate them, it's completely up to you. I would suggest if you make smaller bundles to tie them together. I kept mine together and within 2 months they are 2x the original height with the help of Super Green fertilizer I add to the water every 2 weeks." ]

[ "No and no. However it was really easy for me to assemble, took about 20 minutes. It would have taken 10 but my Yorkie insisted on helping.", "Just don't put the arms on during assembly. That sentence tells you that you have to put the chair together." ]

[ "No, there isn't. At least not on mine. Maybe they will make a newer model that has blue-tooth capability?", "Not on the version I have. If they have updated it, maybe, but I really don't know. My version plays AM/FM radio (no preset buttons, just a knob to roll to your station). and a CD payer, that has a pretty good sound, for it's price.", "I believe in the back there is a connection to plug in adapter for other musical items. In the manual it tells what kind of adapter is needed. Your local radio shack could also help u. They are usually well informed.", "We don't think so but hubby hooked up his phone to device and we listened to 50s-60s music. I'm thrilled anyways.", "there is a place on the back and a switch you flip for an aux. thing, but no usb port. hope this was of some help" ]

[ "Not sure if it will work. Sounds like the same problem I had. I researched eBay and Google to find the part # and to see if it would work on my laptop.", "I used this cable on a DV4-1028US successfully. It's likely going to work on yours, too. Everything that I have seen for these parts, seem to be identical for all DV4 models.", "Yes it will plug right inif it is the one in the picture.... part # DC02000IO00 will fit all DV4", "I put one in a DV4-1435DX and it worked fine. Don't know about the 1465DX. Good Luck.", "Hi, if the laptop has a problem at a certain angle, there is a good chance that the flex cable has a faulty wire, I believe it should work.", "Hi, sorry but i can't help you with your query. Although i bought this cable for my hp dv4 la1516 i never installed it. So i didn't know certainy if it works. Sorry i cant help you" ]

[ "I bought the spots and love them u just got to make sure your buying spots or floods they are bright", "there a decent size i have four mounted on a roof rack on my jeep and when there on i can see another 50 ft or so in front", "Very, very bright. They are on the smaller size about 5x4 and about 4\" deep. However they look clean and put out a flood pattern but the light up reflective signs from 100`s of yards away. So far no issues, brackets are a little flimsy but light housing is solid. I would biy again", "I put them on the hardtop of my rhino facing rear for backup lights. More spot than flood but they are so bright that they work perfect for my application. FYI I put their light bar on the front it is a combination of spot and flood and I ride mostly at night. They perform as I hoped they would, perfect and bright. PS they are put together very well with a high quality fit and finish. Not sure of your application but you would hard pressed to be disappointed with them." ]

[ "Around 2 to 2 1/2 inches. They seem to be the same size as my sons tires. Looks like they are a average kid tire width", "Grace this is a Christmas gift so we haven't opened it yet. I'll respond back when I know but it'll most likely be Christmas eve. Is that too late for you?", "I'm not sure the exact # on the size, but it's a normal size tire width as would be on any kids bike this size - not the thin type at all.", "a little over 2\" at the tread. They are a light tread pattern for road and light off-road." ]

[ "Not sure how deep your factory location is. The jbl has a very large magnet ." ]

[ "Pentel makes a six-pack of refills cartridges. See: http://www.amazon.com/dp/B00579OG36/ref=sr_ph?ie=UTF8&qid=1425380608&sr=1&keywords=pentel+refill" ]

[ "The manufacturer says Krylon Fusion will bond to rubber. That said, I'd advise you to spray multiple light coats, plenty of drying time between and curing up to 7 days before using the cords. Without this extra care, I'd be concerned about surface cracks when you move them.", "I can't answer that... I haven't tried it on anything as flexible as extension cords (on purpose)? From what I have seen, after spray painting my lamp, I got some on the extension cord, and it sticks rather well. I will most likely paint the rest and see what happens." ]

[ "Hi J. Wurtenberger, Yes, it does use Com port. If you are uncertain which port try each COM port one at a time and use the one that successfully allows the program and your device to communicate. Thanks, Mediabridge Customer Support", "Hi J. Wurtenberger,Yes, it does use Com port. If you are uncertain which port try each COM port one at a time and use the one that successfully allows the program and your device to communicate.Thanks,Mediabridge Customer Support" ]

[ "I called Cuisinart, they told me it was induction compatible. Unfortunately it definitely is not. Very nice pan in any case. If a magnet will stick to the bottom of a pan, it will identify induction ready cookware.", "Don't know. I cook on gas. Sounds like a question for the stove manufacturer.", "Because it is metal and absolutely flat, I can't see why it wouldn't. My pieces are steel over copper. Perhaps if you have one with aluminum, it might not." ]

[ "I don't have it with me today. I have put my corel cereal bowls in it with no problem. We also use the lunch meat (glad containers) with left overs and that fits nicely. Its shape gives (stretches). Just guessing I would say 10-12\" tall, 10 x 6 wide." ]

[ "Strong enough for most tasks. I have used the straps to carry this thing filled with notes and a laptop, although it was not totally full. It has held up to this for a dozen or so trips so far...", "Yes, it comes with a sturdy strap. I don't know what the load capability of the strap is (that would need to be answered by the manufacturer) but I usually have my bag loaded with a lot of books, folders, and 2 binders. It is pretty heavy and the strap handles the weight with no issues. However, my bag is so heavy that it hurts my shoulder so I have taken the strap off and just carry it by hand." ]

[ "I bought this for my teenage daughter a couple years ago and she said it is not adjustable, since it's \"Pro\" scooter. I would stick with the Razor Kick a Scooter, A2 or A3, you can tell it's adjustable by seeing a lever on the bar. Hope this helps!", "It isn't adjustable, but all his friends used it & it didn't matter if they were taller or not, they still enjoyed riding it!", "My son says it is not adjustable. He's 10 and it's fine for him. He's a little on the small side for 10. It is noticeably heavier than other Razor models.", "the front bar is not adjustable and does not fold down for storage. I think that is what makes it a \"pro\" scooter....it is stronger or less flimsy. I think most scooters have fairly standard length handle bar posts. This scooter should work for a 7 - 18 year old. (both my 8 and 16 year olds can ride it....as can I...even though I don't like bending down to reach the handle bars)", "Generally the bars should be at waist height. My son is 9 and it is the right height for him. They are not adjustable." ]

[ "No, the case goes around the top and sides but does not go onto the front at all.", "No it does not. That is something I noticed right away. I sure wish it did though.", "No the case is decorative, not protective. It's even with the screen, no bumper to protect the screen if you drop your phone." ]

[ "The top is a bit cumbersome but only when you go to put it down because of the tubes...we grab our kitchen trash can, which is a rectangular, 15 gallons, plastic container, and straddle the cage over the top. The tubes fit perfectly. Our guy tends to be up in the top to eat in the early AM when we get him out to play through the opening in the top. The tubes would also straddle the edge of a bath tub though!", "It's not hard but this thing sucks! It is all crooked, cheap plastic and our gerbils hated it", "Are you talking about the small door on the top? Or the whole cage on top of the tank? They both very ez to remove. For the small door, you just lift the handle and pick up your hamster from the top level. Removing the top part is ez as well. Everything will be together (without rebuilding the whole thing). Just lift and put the cage somewhere flat. Just make sure you remove the tube first.", "There is a door at the top to open to reach in. The wire part just sits on top of the tank. So when you want that off you just lift it.", "Not at all! It just sits on top and lifts right off. It has a plastic edge all the way around it so it stays in place on top of the tank." ]

[ "No footings, just stick into the ground. I had to drill a couple of logs to hold the stakes in place while using it on a hard surface.", "Just a metal spike that goes in the ground. Not multiple feet or anything like that. Just a single spike. I have never actually used the spikes for mounting it above a fire, only mounted the rotisserie on my BBQ grill. But, I would think that if you got the spikes about four to six inches into the ground they would be plenty sturdy." ]

[ "Has both japan and china on the id tag. Mine works great, lots of power, be careful. Everything I have been buying that's been made in the USA has been breaking. I just don't know anymore. But so far this grinder has been great. I'll be using it again tomorrow", "Mine was made in Japan but is a almost 5years old now. I hope manufacturing has not moved to China on the new stuff but a gander at a display unit at your local Lowe's will confirm. Their price is twice what you would pay online though but never hurts to look first." ]

[ "My old lock had \"Atrium Lock\" imprinted on it. When opening the door, it could be seen on the lock body that goes inside the door. I did notice that the new lock did not have this imprint.", "To the best of my knowledge it is. Atrium door hardware is a bit pricey but it's a quality product. Replacing hardwre is easy...just follow the instructions.", "Hi. I also had a mid-1980s Atrium Door that stuck a lot. I purchased this replacement. It fit and works perfectly. It was the perfect solution to buying a whole new door. I would highly recommend you give it a shot.", "If your handle looks like this, then this should be the right one. Believe me, I looked everywhere and everyone told me it had to be an \"Atrium Door\" handle and hardware stores do not carry it.", "I think it is, Ebay has the exact lock I purchased. It is listed as Artium door lock. My new one is beautiful, I replaced it myself and I am very happy with it." ]

[ "Sorry, I don't know the answer to your question. I'm unfamiliar with other models.", "Not sure but this one has been out for some time. This particular model is plagued by melting power button on the handle. Mine didn't even last 6mo." ]

[ "Yes. I combine exercises. I put my weight on the floor an arm's length away. While in the down position, I keep my arms straight and lift the weight above my chest. I then do several presses, after which I do a sit-up while still hiding the weight close to my chest. Alternatively, I do the sit-up first and then press the weight when I am in the top position. Finally, in half sit-up position I shift the weight from side to side (dumbbell or kettle bell). Pure torture. Note that there is no rack on which to rest the weight, as with a bench." ]

[ "I did some research on the Bazoongi website before I purchased this trampoline. The website stated that the maximum weight was 100 pounds", "It has been a while since I purchased this and put it together , but if not mistaken I think the company states its designed for a single person up to 100 lbs. Here is a link to the product Owner's Manual (PDF). I hope it helps!! My daughter loves her's. http://www.bazoongi.com/48''%20Bouncer%20IM%20R2.pdf" ]

[ "Yes, this item will allow internal drives to dock into it and be used as USB externals." ]

[ "I am not going to measure the dishpan, the dimensions given in description are accurate. But the handles stick up so high I can't use it as dishpan, aggravating. But that said I plan on using it as a storage basket, it is great for that." ]

[ "It is a few inches higher than 16, and you can't make it any lower than that, it can rise a bit, and tilt, to the point that you might as well be standing instead of sitting in it. I wouldn't recommend this to be a viable option." ]

[ "Hmmm...This is a well made, sturdy, and very lovely rod. We have a tapestry hanging from it that's about 5 lbs. I would think it could hold up to 10 maybe 15 lbs, looking at it. Hope this helps ;))" ]

[ "I haven't actually tried it in bed; but when I use it while sitting in an easy chair, I place it on a pillow on my lap and then adjust the angle. I suspect the same technique would work in bed.", "The design of this book holder is excellent for a desk top. I use it to hold papers that I am working on as I enter data into my computer. I do not recommend this item for use in a bed. I do recommend this item for use at a table or desk.", "I haven't tried it. It has a prop in the back which is sturdy but it probably needs a flat surface. Would recommend a table tray underneath. It might be heavy after a while since the solid wood is pretty thick.", "This is a more substantial book holder than I'd want sitting on my stomach. It's more like an adjustable lecturn." ]

[ "The weight limit for most stability balls is 250 lbs., although models capable of supporting weights of up to 300 lbs. are not uncommon.Read more: http://www.livestrong.com/article/380861-weight-limits-for-stability-balls/#ixzz2VDAmLq6f", "The weight limit for most stability balls is 250 lbs., although models capable of supporting weights of up to 300 lbs. are not uncommon. Read more: http://www.livestrong.com/article/380861-weight-limits-for-stability-balls/#ixzz2VDAmLq6f" ]

[ "Do you mean 2 gloves in a pair? Isn't that how it has always been? It will be one left and one right glove for one pair of gloves. If you mean 2 pairs, then it must be a shipping mistake." ]

[ "It depends on which store you order from as to who has free shipping or not." ]

[ "No this battery is not enough to get that mileage plus you need to change the gear to reach that speed need a bigger battery with a diffrent gear than the original good luck", "Probably not. I run a three cell lipo (11volt) in my slash, and it does 60mph. Stay with traxxas though. I had problems with other brands.", "You want to look for an 11.1V (3-cell) LiPo battery (TRA2849, UPC #020334284907). The higher voltage is what really gives you the extra speed. A higher mah rating just gives you longer runtime. When you switch to a 3-cell battery, you will probably want to adjust your gearing as well. Your truck manual should come with a recommended gearing for running with 3-cell LiPo. Start with that gearing and run your truck for a minute or so and pull it in so you can check to make sure your motor and ESC are not overheating (brushless motors will be damaged if they reach 180 Def F). If they are getting too hot, drop a couple of teeth on your pinion gear to lower your gearing. You want to look for an 11.1V (3-cell) LiPo battery (TRA2849, UPC #020334284907). The higher voltage is what really gives you the extra speed. A higher mah rating just gives you longer runtime. When you switch to a 3-cell battery, you will probably want to adjust your gearing as well. Your truck manual should come with a recommended gearing for running with 3-cell LiPo. Start with that gearing and run your truck for a minute or so and pull it in so you can check to make sure your motor and ESC are not overheating (brushless motors will be damaged if they reach 180 Def F). If they are... » Read More You want to look for an 11.1V (3-cell) LiPo battery (TRA2849, UPC #020334284907). The higher voltage is what really gives you the extra speed. A higher mah rating just gives you longer runtime. When you switch to a 3-cell battery, you will probably want to adjust your gearing as well. Your truck manual should come with a recommended gearing for running with 3-cell LiPo. Start with that gearing and run your truck for a minute or so and pull it in so you can check to make sure your motor and ESC are not overheating (brushless motors will be damaged if they reach 180 Def F). If they are getting too hot, drop a couple of teeth on your pinion gear to lower your gearing. « Show Less", "If not to 60 very close. Lasts a lot longer than the one that comes with the car out of the box." ]

[ "As long as it has a built in or you put a external tripod adaptor it should work I would not go any bigger then 15s on the tripods do to weight limit", "I have not, personally, ever owned a set of Fender Passports. However, the stands say they have 35mm poles and the speakers have 35mm stand ports. I'd say that's a go. Good luck.Al" ]

[ "it sure will, Deborah G. It comes with hardware to attach any type of flat screen TV that there is... as long as it's less than 110 pounds and smaller in size than 60 inches...Although I've not heard of a 44\" television, the Average Vizio between 42 and 47 inches is less than 40 pounds...", "I have a 50\" Vizio which works fine, so I don't think you would have a problem with a 44\"" ]

[ "I suppose you could put it in a kiddie pool. Arranged in a circle it's less than 4 feet in diameter, so pretty much any pool would work.", "Here is a link to the kiddie pool we used, and the little starter kit structure fit quite perfectly inside of the pool. It worked great. Super easy clean-up. http://m.acehardware.com/product/index.jsp?productId=53377606" ]

[ "No mirror, but I found it easy to use and it worked great for my little dog's teeth. It removed all the brown build up, and she actually kind of enjoys having her teeth scraped.", "This scraper is sold alone. It does not have a mirror or come with one. Honestly, I found this difficult to use. I probably would not recommend this tool." ]

[ "I am not a representative of the manufacturer, but my assumption is that it is not pasteurized, or it would not say Raw. Raw conventionally means it has not been heated over 118 degrees." ]

[ "Yes, it does have plastic in contact with the water (not much, but some), plus the lid and spout filter parts. It's still enough plastic that I can taste and smell the chemicals which leech into the water. Disappointing, because I bought this kettle thinking it might be better than some of the others. As far as I can tell, there isn't a single plastic-free electric kettle on the market (in the US) right now." ]

[ "A 30\" Unidoor is designed to fit an opening of 30\" to 30-1/8\" only. We have already taken into account all of the pieces that make up this door, so you can feel confident that a finished, tile-to-tile opening measurement of 30\" (measured at the top, middle, and bottom of the opening) will accept a 30\" Unidoor. If you have any questions about measuring or fit, please do not hesitate to call our DreamLine Technical Support Line at 866-731-2244. We are happy to answer all of your questions.", "Thank you for your inquiry.Yes, it will fit your opening. Please make sure your walls are strait.Kind Regards,", "I don't know the width of your door. To be certain, I would contact the customer service department at Dreamline. We had a issue with the incorrect information on the description and it took a long time to resolve the issue.", "Hello April,No, it would not work. This 30\" Unidoor is designed to fit a finished opening of 30\" (maybe 30-1/8\" at the most) but the wall must be plumbed, the threshhold must be level and there must be a stud or other wood reinforcement behind the wall where the hinges will be mounted. You will need to reduce your opening closer to 30\", perhaps attaching some type of strip to the strike side wall and attaching the strike vinyl to that; otherwise, the door will not reach and close against the strike vinyl.We hope that helps. Please feel free to let us know if you need further assistance.Thank you,Sales Team Hello April,No, it would not work. This 30\" Unidoor is designed to fit a finished opening of 30\" (maybe 30-1/8\" at the most) but the wall must be plumbed, the threshhold must be level and there must be a stud or other wood reinforcement behind the wall where the hinges will be mounted. You will need to reduce your opening closer to 30\", perhaps attaching some type of strip to the strike side wall and attaching the strike vinyl to that; otherwise, the door will not reach and close against the strike vinyl.We hope that helps. Please feel free to let... » Read More Hello April,No, it would not work. This 30\" Unidoor is designed to fit a finished opening of 30\" (maybe 30-1/8\" at the most) but the wall must be plumbed, the threshhold must be level and there must be a stud or other wood reinforcement behind the wall where the hinges will be mounted. You will need to reduce your opening closer to 30\", perhaps attaching some type of strip to the strike side wall and attaching the strike vinyl to that; otherwise, the door will not reach and close against the strike vinyl.We hope that helps. Please feel free to let us know if you need further assistance.Thank you,Sales Team « Show Less", "The door is 29 and 5/8 inches fully assembled with hinges, a 1/2 inch door stop is included with the kit so you might be pushing the limits on your door opening unless you can shim out hinges. Quality Door and looks great." ]

[ "Yes you can use the higher mAh batteries as long as they are 1.2V and the batteries are the same size. The higher mAh will just have allow for the lights to stay on.", "I think so... If the voltage is the same and especially if the capacity is greater, it should work.", "I put these batts . in a handheld scanner...was way overkill on mAh...like on your lights. But have been doing great, just hold a chg. 'alot' longer. The important part is ...it's still 1.2V. Hope this helps ya ☺Have been in and working for about 6months or so. The $'s were right for sure.", "The two prior answers are both correct that these batteries will last all night for you (probably for several days with no recharge) ... And the solar trickle charge could reduce the batteries to less than its full potential as pointed out by the other responder... However, You could take the batteries out once a month and put them in a home charger that is capable of a complete refresh of the batteries OR Put a cover or tape over the solar recharger and only allow it to recharge the batteries every week.", "Yes, the power draw is standard, mAh is a capacity rating. These will work the same but for longer", "You can but they won't recharge to there full potential and there a little expensive for that purpose", "Yes, that is a rating of how long they last. Each time I buy Power 2000 for my cameras they get better and better mAh." ]

[ "Suzy, this is seller Rocket Shipping. Were you trying to buy the Casio XR-9X2S m tape from me? You can get a double pack from me for $9.99 + 4.99 shipping. To find Rocket Shipping, scroll down below the featured merchants. Thank you, Kelley" ]

[ "Mine are super bright, but with what's included in the box, no.However, any light can be dimmable. LED's use DC current, these particular ones plug into standard 110v, then have a mini transformer to switch it to 12v DC. The \"dimming\" has to happen after that transformer where any full-range switch would work.If you search \"LED rope light dimmer\" on Amazon, there are interchangeable power cords that DO have dimmers on them that work with this product, but they will ONLY handle ONE 50' run." ]

[ "Yes, absolutely. Our mattress is a little over 12\" and the cover fit and went on with very little effort. Later, we purchased a 4\" memory foam mattress topper, with a cover. The cover for the mattress topper looked like such a \"pain\", we managed to fit it into our mattress cover." ]

[ "Specifications Plug Type: 3.5mm gold-plated Drive: 40mm Driver Type: Dynamic Frequency Response: 20 Hz to 20,000 Hz Sensitivity: 114dB / V Impedance: 32 ohms @ 1kHz Weight: 209g (0.46lbs) Cord Length: 1.2m (4ft)" ]

[ "The exact door dimensions are 17 3/4\" Long x 12\" wide. I hope this helps you.", "If you are looking for the actual opening of the heating compartment, it is 14 3/4\" wide x 9\" tall. Hope that helps." ]

[ "Just got ours today & it works great w-Iphone 6 (after you download an app on your phone). We printed a few photos and they came out great. So simple & easy to use!", "I have not gotten it to work with my iphone6. It works with one of our family's iphone5c but not another. I will be returning it if I can not get it to work." ]

[ "It can be a bit tricky. But once you get it figured out it will be a breeze. Lets see if i can help. First off make sure you have the rope and pulleys set up correctly. Look at the photo on the package, it helped me as i got mine all messed up. It also works best with a load on it. Hard to lock and unlock with out a load. With some weight on it you should be able to pull up on rope, when you want to lock it just pull into narrow groove on locking pulley bar. the bar will then raise up and lock. To release pull down on rope and slowly lower load while you keep rope in locking bar in the larger part of bar. It works best for me to keep pulley and hoisting rope facing the same direction. If you are at an angle or off set, it wants to lock. Built in safety feature i guess. I use one of these for a deer hanger and i also use two for hoisting my kayak up to the ceiling for storage. Just practice a little with some weight on it and watch how it all works together. You will get it.. Hope this helps" ]

[ "Cylindrical low voltage SBM20-1 tube. Only does Beta and Gamma. Its does work well. A nuclear plant recently had a leak about 245 miles north of me, and it went bats as I was downwind and it showed elevated radiation at 6 times my normal background for 45 seconds so I know I caught a wisp of it. This is not professional lab equipment, but is good value for what I paid for it. The battery life is awesome too with LSD rechargeable NiMH AAA batteries. I run it 24/7. At this price, I do not really care about tube life. Just do not expect professional grade results from it, but it is good enough and a good value for the money.", "I have not figured out how to use the unit. The instructions are not easy to follow.", "Tube life? The Geiger-Mueller tube is a sealed glass cartridge and will work as long as you don't crack it.", "Cylindrical low voltage SBM20-1 tube. Only does Beta and Gamma. Its does work well. A nuclear plant recently had a leak about 245 miles north of me, and it went bats as I was downwind and it showed elevated radiation at 6 times my normal background for 45 seconds so I know I caught a wisp of it. This is not professional lab equipment, but is good value for what I paid for it. The battery life is awesome too with LSD rechargeable NiMH AAA batteries. I run it 24/7. At this price, I do not really care about tube life.Just do not expect professional grade results from it, but it is good enough and a good value for the money. Cylindrical low voltage SBM20-1 tube. Only does Beta and Gamma. Its does work well. A nuclear plant recently had a leak about 245 miles north of me, and it went bats as I was downwind and it showed elevated radiation at 6 times my normal background for 45 seconds so I know I caught a wisp of it. This is not professional lab equipment, but is good value for what I paid for it. The battery life is awesome too with LSD rechargeable NiMH AAA batteries. I run it 24/7. At this price, I do not really care about tube life.Just do not expect professional grade results from it, but it is... » Read More Cylindrical low voltage SBM20-1 tube. Only does Beta and Gamma. Its does work well. A nuclear plant recently had a leak about 245 miles north of me, and it went bats as I was downwind and it showed elevated radiation at 6 times my normal background for 45 seconds so I know I caught a wisp of it. This is not professional lab equipment, but is good value for what I paid for it. The battery life is awesome too with LSD rechargeable NiMH AAA batteries. I run it 24/7. At this price, I do not really care about tube life.Just do not expect professional grade results from it, but it is good enough and a good value for the money. « Show Less" ]

[ "No. You need a three wire cord. While you could plug the cord into the wall and use a ground adapter to plug the refrigerator into the cord, you would NOT have a ground connection. THIS WOULD NOT BE SAFE. There are several flat plug grounded extension cords available on Amazon in a variety of sizes. If it is a large refrigerator be sure to get a cord that is heavy enough.", "I sure don't think i would. I wouldn't feel comfortable using it for that purpose." ]

[ "No. It's definitely not chemical free. There are plenty of inactive ingredients. However, this is the gentlest sunscreen I have ever used for my sensitive and acne prone skin. I don't break out and it never burns when I use it." ]

[ "I ordered a set at Christmas and it did come with a baby . It was a complete surprise to me because no where on the box or product details was it mentioned.", "I just ordered this set for a gift and was pleased that it DID come with the baby" ]

[ "It's air powered. I replaced it with a maxijet 400. It sprays pretty hard and I wouldn't put any more gph on it than that.", "It's actually not a water pump. It's just an air pump that uses bubbles to draw water into the unit. You could buy a pump and get pretty good flow. I used a small pump that I bought separate and was running probably 30ish gph give or take a few gallons. Flow with the air pump included isn't too good. Maybe 10 gph." ]

[ "As long as the model number of the battery is XB1918, it will fit. This battery was identical in size and shape to the XB1918 that come out of my V1917 shark vacuum.", "Yes, it should work just fine. Shark, like many manufacturer's, plays games with their model numbers in different retail outlet stores. But the model you have is basically the one that uses this 7.2 volt battery pack. It is fairly simple to change it, just unsnap the cover on the bottom, pull the battery pack out, and disconnect the power connector. You will see that your battery pack physically looks like the configuration shown in the picture." ]

[ "It contains 12 C, 20 H, 6 O, 4 N, 2 S, 4 halogen, 1 P, 1 metal and all the links", "12 carbon20 hydrogen6 oxygen4 nitrogen2 sulfur4 halogen1 phosphorus1 metal26 medium grey links12 long flexible links26 short links1 tool for separating bonds from links" ]

[ "Hello, this fabric bolt is 54\" wide x 40 yards. 40 yards = 120 feet long. The bolt is one continuous piece of fabric. I hope this is helpful!", "Suppose to be continuous. Mine Was 2 pieces split about halfway through the roll." ]

[ "Yes. I put my son's 32 inch tv in there and use it like a monitor. The 32\" is a little too large for the space so I put the tv behind the upright bars and it fits just right. 23\" monitor should fit very easily.", "It's 23 inches side to side. 18 inches up and down, It will fit.Love this little desk. it fit's perfect in a corner.", "Yes, you can fit your TV on this shelf and be able to see it efficiently. I bought this desk for my old computer and it works fantastic. I am well pleased with this desk. I had another desk similar but it was much too bulky and took up much more space. This one is perfect." ]

[ "I have the Lowes 16619 version and it works fine. I believe this fits all models as the actual grill website only sells one version. At first I was going to try and get by with a cheap round stone and make some supports for it but caved and bought this one. This is a must for low and slow grilling as a deflector, or crank the heat and cook pizza or whatever on it. I've had it up to 650+ degrees and had no issues.", "If you look up model 16620 on the home depot site, it shows this stone as an accessory, so I would think so." ]

[ "It all depends on the seller. The first time I purchased this set, I received one of each, but the second time I purchased it, I only received one. I would just say confirm with the seller before purchasing.", "Yes, I did. I purchased mine from 298 BEAUTY SUPPLY. It's the real stuff too! I hear a lot of people complaining they get knock-offs." ]

[ "The footrest reclines to horizontal. The backrest reclines to a little past 45 degrees. Not quite flat but still good for resting." ]