OrganizedProgrammers/ETSISpecMetadata · Datasets at Hugging Face

id stringlengths 7 13	title stringlengths 7 396	type stringclasses 2 values	version stringclasses 245 values	url stringlengths 90 98	scope stringlengths 0 83.8k
101 173	Broadband Radio Access Networks (BRAN); Inventory of broadband radio technologies and techniques	TR	1.1.1	http://www.etsi.org/deliver/etsi_tr/101100_101199/101173/01.01.01_60/tr_101173v010101p.pdf	The scope of the present document is identification of technologies and techniques and their characteristics that may prove suitable for the implementation of the physical, Data Link Control (DLC) and subnetwork convergence functions of BRAN as identified in TR 101 031 [4] and TR 101 177 [5]. The BRAN Project is intended to provide specifications for these networks. The technologies and techniques identified should support the main characteristics of these networks: high data rate, high capacity and uncoordinated deployment. Bringing together these technologies and techniques in a single document facilitates evaluation of their relative merits as well as facilitating the composition and evaluation of combinations. The present document is not intended to be inclusive or complete: it reflects a state of the art at the beginning of the standardization process. Much of the material is derived from private and public research projects in the field of broadband radio systems. Examples are the EU ACTS projects AWACS, MEDIAN, SAMBA and Magic WAND and the German ATMmobil project.
101 112	Universal Mobile Telecommunications System (UMTS); Selection procedures for the choice of radio transmission technologies of the UMTS (UMTS 30.03 version 3.2.0)	TR	3.2.0	http://www.etsi.org/deliver/etsi_tr/101100_101199/101112/03.02.00_60/tr_101112v030200p.pdf	This ETSI Technical Report (TR) establishes the technical procedure for the comparative evaluation of candidate technologies for the UTRA. The UTRA includes the handling of the representative bearers as defined in UMTS 21.01 [1], i.e. Open System Interconnection (OSI) layers 1-3. It establishes the criteria based upon the requirements contained in UMTS 21.01 [1]. The primary purpose of this [report] is to facilitate the comparison of different candidates between milestones M1 and M2 of the UTRA definition procedure (Refinement and synthesis phase). It will also be used after milestone M2 (Definition phase) and in the submission of the candidate to ITU. The scope of this report is not to make the actual choice but to define how the technical evaluation will be performed.
101 147	Environmental Engineering (EE); Interworking between Direct Current/Isolated (DC/I) and Direct Current/Common (DC/C) electrical power systems	TR	1.2.1	http://www.etsi.org/deliver/etsi_tr/101100_101199/101147/01.02.01_60/tr_101147v010201p.pdf	The present document describes and establishes simplified models of the different sections of the ground distribution network constituting the DC/I and the DC/C electrical power systems. These models are interworked to identify the common impedance where DC power supply currents can circulate (interconnection between DC/C and DC/I, DC/C and DC/C, DC/I and DC/I). These results allow the establishment of some basic engineering advice that should be applied to guarantee the good behaviour when interconnecting two systems. These precautions are given for functionality reasons: • the noise immunity of the pre-existing system and of the links between the system and the MDF should be conserved; and safety aspects: • the screens of signal cables between the pre-existing system and the Main Distribution Frame (MDF), the conductors and the connections of the pre-existing system have to withstand additional currents.
101 110	Digital cellular telecommunications system (Phase 2+) (GSM); Characterisation, test methods and quality assessment for handsfree Mobile Stations (MSs) (GSM 03.58 version 6.0.1 Release 1997)	TR	6.0.1	http://www.etsi.org/deliver/etsi_tr/101100_101199/101110/06.00.01_60/tr_101110v060001p.pdf	The present document gives some guidelines to implement test methods and to evaluate the transmission quality of handsfree Mobile Stations (MSs). The normative characteristics and test methods for handsfree Mobile Stations (MSs are defined in GSM 03.50). The present document gives additional data. It includes summaries of texts or contributions presented and discussed during the meetings of ad hoc group SMG2/03.50 on environmental conditions, speech processing and quality assessment for handsfree Mobile Station. The items covered by this report are mainly. - Environmental conditions for handsfree Mobile Stations. - Speech processing techniques and consequences on delay. - Speech quality assessment for handsfree implementing acoustic echo cancellation and noise reduction.
101 130	ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); Study of the feasibility for standardizing Self-organizing Time Division Multiple Access (STDMA) system requirements	TR	1.1.1	http://www.etsi.org/deliver/etsi_tr/101100_101199/101130/01.01.01_60/tr_101130v010101p.pdf
101 105	Digital cellular telecommunications system (Phase 2+); Fraud Information Gathering System (FIGS); Service requirements - Stage 0 (GSM 01.31 version 8.0.0 Release 1999)	TR	8.0.0	http://www.etsi.org/deliver/etsi_tr/101100_101199/101105/08.00.00_60/tr_101105v080000p.pdf	The present document describes the requirements (at a stage 0 level) of the Fraud Information Gathering System (FIGS). FIGS provides the means for the HPLMN to monitor a defined set of subscriber activities. The aim is to enable service providers/network operators to use FIGS, and service limitation controls such as Operator Determined Barring (ODB) and Immediate Service Termination (IST), to limit their financial exposure to large unpaid bills produced on subscriber accounts whilst the subscriber is roaming outside their HPLMN. HPLMNs may also choose to collect information on subscriber activities whilst their subscribers are within the HPLMN.
101 122	Network Aspects (NA); Numbering and addressing for Number Portability	TR	1.1.1	http://www.etsi.org/deliver/etsi_tr/101100_101199/101122/01.01.01_60/tr_101122v010101p.pdf	The present document is to analyse the impact of Service Provider Portability on Geographic and non-geographic numbers and number formats used at the Network Termination Point (NTP) and also at the Point Of Interconnection (POI) between networks in a multi-vendor environment. Routeing requirements are analysed and numbers and number formats are derived as a consequence.
101 127	Transmission and Multiplexing (TM); Digital Radio Relay Systems (DRRS); Synchronous Digital Hierarchy (SDH); High capacity DRRS carrying SDH signals (1 x STM-1) in frequency bands with about 30 MHz channel spacing and using Co-Channel Dual Polarized (CCDP) operation	TR	1.1.1	http://www.etsi.org/deliver/etsi_tr/101100_101199/101127/01.01.01_60/tr_101127v010101p.pdf
101 101	Methods for Testing and Specification (MTS); TTCN interim version including ASN.1 1994 support [ISO/IEC 9646-3] (Second Edition Mock-up for JTC1/SC21 Review)	TR	1.1.1	http://www.etsi.org/deliver/etsi_tr/101100_101199/101101/01.01.01_60/tr_101101v010101p.pdf
101 094	Broadband Integrated Services Digital Network (B-ISDN); ATM for the transport of 64 kbit/s narrowband channels	TR	1.1.1	http://www.etsi.org/deliver/etsi_tr/101000_101099/101094/01.01.01_60/tr_101094v010101p.pdf
101 092	Network Aspects (NA); Report on Carrier Selection	TR	1.1.1	http://www.etsi.org/deliver/etsi_tr/101000_101099/101092/01.01.01_60/tr_101092v010101p.pdf
101 088	Network Aspects (NA); Cordless Terminal Mobility (CTM): Numbering and Identifying	TR	1.1.1	http://www.etsi.org/deliver/etsi_tr/101000_101099/101088/01.01.01_60/tr_101088v010101p.pdf
101 085	Digital cellular telecommunications system (Phase 2+) (GSM); Performance characterization of the GSM Enhanced Full Rate (EFR) speech codec (GSM 06.55 version 8.0.0 Release 1999)	TR	8.0.0	http://www.etsi.org/deliver/etsi_tr/101000_101099/101085/08.00.00_60/tr_101085v080000p.pdf	The present document gives background information on the performance of the GSM enhanced full rate speech codec. Experimental results from the Pre-selection and Verification tests carried out during the standardization process by the SEG (Speech Expert Group) are reported to give a more detailed picture of the behaviour of the GSM enhanced full rate speech codec under different conditions of operation.
101 085	Digital cellular telecommunications system (Phase 2+) (GSM); Performance characterization of the GSM Enhanced Full Rate (EFR) speech codec (GSM 06.55 version 7.0.0 Release 1998)	TR	7.0.0	http://www.etsi.org/deliver/etsi_tr/101000_101099/101085/07.00.00_60/tr_101085v070000p.pdf	The present document gives background information on the performance of the GSM enhanced full rate speech codec. Experimental results from the Pre-selection and Verification tests carried out during the standardization process by the SEG (Speech Expert Group) are reported to give a more detailed picture of the behaviour of the GSM enhanced full rate speech codec under different conditions of operation.
101 085	Digital cellular telecommunications system (Phase 2+) (GSM); Performance characterization of the GSM Enhanced Full Rate (EFR) speech codec (GSM 06.55 version 6.0.0 Release 1997)	TR	6.0.0	http://www.etsi.org/deliver/etsi_tr/101000_101099/101085/06.00.00_60/tr_101085v060000p.pdf	The present document gives background information on the performance of the GSM enhanced full rate speech codec. Experimental results from the Pre-selection and Verification tests carried out during the standardization process by the SEG (Speech Expert Group) are reported to give a more detailed picture of the behaviour of the GSM enhanced full rate speech codec under different conditions of operation.
101 085	Digital cellular telecommunications system (Phase 2) (GSM); Performance characterization of the GSM Enhanced Full Rate (EFR) speech codec (GSM 06.55 version 4.0.0)	TR	4.0.0	http://www.etsi.org/deliver/etsi_tr/101000_101099/101085/04.00.00_60/tr_101085v040000p.pdf	The present document gives background information on the performance of the GSM enhanced full rate speech codec. Experimental results from the Pre-selection and Verification tests carried out during the standardization process by the SEG (Speech Expert Group) are reported to give a more detailed picture of the behaviour of the GSM enhanced full rate speech codec under different conditions of operation.
101 083	Network Aspects (NA); CEC Green Paper; Numbering Policy for Telecommunications Services in Europe	TR	1.1.1	http://www.etsi.org/deliver/etsi_tr/101000_101099/101083/01.01.01_60/tr_101083v010101p.pdf
101 081	Methods for Testing and Specification (MTS); Strategy for the use of formal SDL for descriptive purposes in ETSI products	TR	1.1.1	http://www.etsi.org/deliver/etsi_tr/101000_101099/101081/01.01.01_60/tr_101081v010101p.pdf
101 079	Network Aspects (NA); Routeing of calls to pan-European services using European Telephony Numbering Space (ETNS)	TR	1.1.1	http://www.etsi.org/deliver/etsi_tr/101000_101099/101079/01.01.01_60/tr_101079v010101p.pdf
101 078	Network Aspects (NA); Public Switched Telephone Network (PSTN); General aspects of standardization of PSTN services related to the transfer of identification information over the PSTN	TR	1.1.1	http://www.etsi.org/deliver/etsi_tr/101000_101099/101078/01.01.01_60/tr_101078v010101p.pdf
101 077	Intelligent Network (IN); IN Capability Set 2 (CS2); IN intra domain management requirements for IN CS2	TR	1.1.1	http://www.etsi.org/deliver/etsi_tr/101000_101099/101077/01.01.01_60/tr_101077v010101p.pdf
101 075	Digital cellular telecommunications system (Phase 2) (GSM); Base Station and ancillary equipment; Physical and electrical parameters; Application of standards and guidance notes (GSM 11.22 version 4.2.0)	TR	4.2.0	http://www.etsi.org/deliver/etsi_tr/101000_101099/101075/04.02.00_60/tr_101075v040200p.pdf	The present document applies to any Base Station System type or part of a Base Station System and co-located equipment and equipment sites, unless otherwise stated. It applies regardless of ownership or responsibility for installation and maintenance of the equipment or network. The document does assume some previous knowledge of the subject matter and in some areas specialist understanding may be required. The present document addresses the following information: - product requirement overview; - equipment sites and installations; - general applicable specifications; - acoustic noise; - construction; - earthing and bonding; - environmental Conditions; - lightning protection; - power supplies; - reliability/Dependability; - specific applicable specifications for product release; - EMC; - type approval.
101 074	European Numbering Task Force; Management of the European Telephony Numbering Space (ETNS)	TR	1.1.1	http://www.etsi.org/deliver/etsi_tr/101000_101099/101074/01.01.01_60/tr_101074v010101p.pdf
101 073	Number portability for pan-European services	TR	1.1.1	http://www.etsi.org/deliver/etsi_tr/101000_101099/101073/01.01.01_60/tr_101073v010101p.pdf
101 072	Digital Enhanced Cordless Telecommunications (DECT); Global System for Mobile communications (GSM); DECT/GSM integration based on dual-mode terminals	TR	1.1.1	http://www.etsi.org/deliver/etsi_tr/101000_101099/101072/01.01.01_60/tr_101072v010101p.pdf
101 056	Human Factors (HF); European Numbering Task Force (ENTF); Human Factors aspects of the European Telephony Numbering Space (ETNS)	TR	1.1.1	http://www.etsi.org/deliver/etsi_tr/101000_101099/101056/01.01.01_60/tr_101056v010101p.pdf
101 054	Security Algorithms Group of Experts (SAGE); Rules for the management of the HIPERLAN Standard Encryption Algorithm (HSEA)	TR	1.1.1	http://www.etsi.org/deliver/etsi_tr/101000_101099/101054/01.01.01_60/tr_101054v010101p.pdf
101 051	Methods for Testing and Specification (MTS); Report of the CATG applications	TR	1.1.1	http://www.etsi.org/deliver/etsi_tr/101000_101099/101051/01.01.01_60/tr_101051v010101p.pdf	The present document describes the experiences gained from the application of the CATG functionality of the SDL tool available at ETSI (SDT Autolink tool) on the SDL specification of Core INAP CS-2. The SDLs of Core INAP, attached as annex A to [3], gives the normative requirements of the protocol behaviour. The SDLs also makes use of the ASN.1 definitions of the INAP PDUs, therefore providing a complete specification of the protocol suitable for application of CATG.
101 041-2	Human Factors (HF); European harmonization of network generated tones; Part 2: Listing and analysis of European, World and Standardized tones	TR	1.1.1	http://www.etsi.org/deliver/etsi_tr/101000_101099/10104102/01.01.01_60/tr_10104102v010101p.pdf
101 041-1	Human Factors (HF); European harmonization of network generated tones; Part 1: A review and recommendations	TR	1.1.1	http://www.etsi.org/deliver/etsi_tr/101000_101099/10104101/01.01.01_60/tr_10104101v010101p.pdf
101 036-2	Fixed Radio Systems; Generic wordings for standards on DRRS (Digital Radio Relay Systems) characteristics; Part 2: Point-to-multipoint equipment parameters	TR	1.1.1	http://www.etsi.org/deliver/etsi_tr/101000_101099/10103602/01.01.01_60/tr_10103602v010101p.pdf	The present document defines the major standardizable issues for Point-to-Multipoint digital radio-relay systems (P-MP) in the Fixed Service in order to maintain a generic format for the editorial and technical contents. It also give guidelines for the understanding of the definition of the parameters and elements. The present document aims to cover every issue that may be required. Specific standards may differ from the guidelines contained within the present document only if the specific argument is not covered or there is good technical reason for not following them. It is essential to maintain a common understanding of the reasons behind the way certain parameters are defined among the various P-MP standards, which deal with the same general topics and may differ from each other by the application of different access methods or merely from the point of view of numerical requirements. Because some of the parameters and elements are also common to Point-to-Point (P-P) digital radio-relay systems part 1 [1] of the present document should be taken into account when referenced below. The present document is applicable to the wording (generic) of Point-to-Multipoint equipment parameters. The known access methods applied to P-MP systems in the Fixed Service and the access methods to come in the future and combinations thereof implies that subparts of the present document are edited in order to maintain the commonality among the P-MP standards but to leave the way open for future P-MP technologies. Thus for every access method a subpart should be edited defining the specific parameters and when there is a new access method it should be added to the existing TR.
100 392-17-4	Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 17: TETRA V+D and DMO specifications; Sub-part 4: Release 2.0	TR	1.1.1	http://www.etsi.org/deliver/etsi_tr/100300_100399/1003921704/01.01.01_60/tr_1003921704v010101p.pdf	The present document identifies ETSI specifications for TETRA V+D and DMO Release 2.0. Release 2.0 specifications were functionally frozen after the 28th TC TETRA meeting in October 2006. NOTE 1: Functionally frozen means that no further functionality/features may be incorporated into the set of specifications, and that only corrective Change Requests (CRs) are to be accepted and agreed. NOTE 2: It can be expected that corrective CRs will be introduced into the Release 2.0 specifications. NOTE 3: Some of the CRs that will be produced will be for the next Release as they add new functionalities/features. NOTE 4: Some of the documents were in Public Enquiry, One step Approval or National Voting stage at the publication of the present document. Due to those stages editorial modifications may be performed and the version number of the document may step up in the last digit in addition to the normal step-up due to publication or voting. The resulting version is also a part of the present Release 2.0.
100 392-17-3	Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 17: TETRA V+D and DMO specifications; Sub-part 3: Release 1.3	TR	1.2.1	http://www.etsi.org/deliver/etsi_tr/100300_100399/1003921703/01.02.01_60/tr_1003921703v010201p.pdf	The present document identifies ETSI specifications for TETRA V+D and DMO Release 1.3. Release 1.3 specifications were functionally frozen after the 26th TC TETRA meeting in October 2005. NOTE 1: Functionally frozen means that no further functionality/features may be incorporated into the set of specifications, and that only corrective Change Requests (CRs) are to be accepted and agreed. NOTE 2: It can be expected that corrective CRs will be introduced into the Release 1.3 specifications. NOTE 3: Some of the CRs that will be produced will be for the next Release as they add new functionalities/features. NOTE 4: Some of the documents were in Public Enquiry, One step Approval or National Voting stage at the publication of the present document. Due to those stages editorial modifications may be performed and the version number of the document may step up in the last digit in addition to the normal step-up due to publication or voting. The resulting version is also a part of the present Release 1.3.
100 392-17-2	<empty>	TR	1.1.1	http://www.etsi.org/deliver/etsi_tr/100300_100399/1003921702/01.01.01_60/tr_1003921702v010101p.pdf	The present document identifies ETSI specifications for TETRA V+D and DMO Release 1.2. Release 1.2 specifications were functionally frozen after the 21st EP TETRA meeting in June 2003. NOTE 1: Functionally frozen means that no further functionality/features may be incorporated into the set of specifications, and that only corrective Change Requests (CRs) are to be accepted and agreed. NOTE 2: It can be expected that corrective CRs will be introduced into the Release 1.2 specifications. NOTE 3: Some of the CRs that will be produced will be for the next release as they add new functionalities/features. NOTE 4: Some of the documents were in Public Enquiry, One step Approval or National Voting stage at the publication of the present document. Due to those stages editorial modifications may be performed and the version number of the document may step up in the last digit in addition to the normal step-up due to publication or voting. The resulting version is also a part of the present Release 1.2.
100 392-17-1	Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 17: TETRA V+D and DMO specifications; Sub-part 1: Release 1.1	TR	1.1.3	http://www.etsi.org/deliver/etsi_tr/100300_100399/1003921701/01.01.03_60/tr_1003921701v010103p.pdf	The present document identifies ETSI specifications for TETRA V+D and DMO Release 1.1. Release 1.1 specifications were functionally frozen after the 14th EP TETRA meeting in March 2001. NOTE 1: Functionally frozen means that no further functionality/features may be incorporated into the set of specifications, and that only corrective Change Requests (CRs) are to be accepted and agreed. NOTE 2: It can be expected that corrective CRs will be introduced into the Release 1.1 specifications throughout year 2001. NOTE 3: Some of the CRs that will be produced during 2001 will be for the next release as they add new functionalities/features. NOTE 4: Only published documents are included into this release 1.1.
100 287	Television systems; Code of practice for enhanced Teletext	TR	1.2.1	http://www.etsi.org/deliver/etsi_tr/100200_100299/100287/01.02.01_60/tr_100287v010201p.pdf	The present document is intended as a companion document to the full specification, EN 300 706 [1], defining the data and transmission format within enhanced Teletext systems. It is primarily aimed at Teletext editors, service providers and network operators. The intention is to explain in relatively simple terms the new display features and possibilities that are available with enhanced Teletext. The focus is very much on which parts of a large and complex specification have to be implemented to produce a Teletext service that is more visually attractive than has been possible previously. The present document outlines the basic features of enhanced Teletext and highlights the key parameters for a successful service. It makes recommendations as to how aspects of the specifications should be implemented and suggests strategies to maximize the transmission efficiency of the additional data that will be required. It should be noted that the present document was compiled in advance of any first-hand experience in editing or operating an enhanced Teletext service. It is anticipated that a subsequent version will be able to draw upon the knowledge and experience that operating real services will bring.
101 028	Methods for Testing and Specification (MTS); Survey on the Use of Test Specifications produced by ETSI	TR	1.1.1	http://www.etsi.org/deliver/etsi_tr/101000_101099/101028/01.01.01_60/tr_101028v010101p.pdf
101 023-2	Methods for Testing and Specification (MTS); Application of object-oriented SDL features in B-ISDN specifications	TR	1.1.1	http://www.etsi.org/deliver/etsi_tr/101000_101099/10102302/01.01.01_60/tr_10102302v010101p.pdf
101 023-1	Methods for Testing and Specification (MTS); Portability of SDL specifications	TR	1.1.1	http://www.etsi.org/deliver/etsi_tr/101000_101099/10102301/01.01.01_60/tr_10102301v010101p.pdf
101 020	Transmission and Multiplexing (TM); Synchronous Digital Hierarchy (SDH); SDH project status report for 1996	TR	1.2.1	http://www.etsi.org/deliver/etsi_tr/101000_101099/101020/01.02.01_60/tr_101020v010201p.pdf
101 019	User requirements; Mobility; Interworking and interoperability between networks	TR	1.1.1	http://www.etsi.org/deliver/etsi_tr/101000_101099/101019/01.01.01_60/tr_101019v010101p.pdf
101 016	Transmission and Multiplexing (TM); Digital Radio Relay Systems (DRRS); Comparison and verification of performance prediction models	TR	1.1.1	http://www.etsi.org/deliver/etsi_tr/101000_101099/101016/01.01.01_60/tr_101016v010101p.pdf
100 815	Digital Video Broadcasting (DVB); Guidelines for the handling of Asynchronous Transfer Mode (ATM) signals in DVB systems	TR	1.1.1	http://www.etsi.org/deliver/etsi_tr/100800_100899/100815/01.01.01_60/tr_100815v010101p.pdf	The present document provides the mapping scheme to be used for the transport of ATM cells over MPEG-2 Transport Stream packets. The purpose of encapsulating ATM cells directly into an MPEG-2 transport stream is to: • interconnect ATM networks via DVB systems or provide ATM services to end-users using DVB systems; • offer differentiated quality of service to end-users by utilizing the ATM mechanisms. The main constraints of this problem are to: • providing an efficient encapsulation mechanism; • maintaining DVB/MPEG-2 compatibility when transporting ATM cells; • respecting ATM Quality-of-Service requirements throughout DVB/MPEG systems.
100 392-17-6	TETRA and Critical Communications Evolution (TCCE); Part 17: TETRA V+D, DMO and associated specifications; Sub-part 6: Release 2.2	TR	1.2.1	http://www.etsi.org/deliver/etsi_tr/100300_100399/1003921706/01.02.01_60/tr_1003921706v010201p.pdf	The present document identifies ETSI specifications and reports for TETRA V+D and DMO Release 2.2. It also includes ETSI specifications and reports relating to Critical Communications evolution undertaken by TC TCCE as well as relevant specifications produced by other ETSI technical committees. The present document is a revision of ETSI TR 100 392-17-6 V1.1.1 published in 2018 and contains the specifications and reports that have been produced since then. ENs relating to TETRA specifications are often updated by first introducing an ETSI Technical Specification (TS) which will contain new features and change requests. Therefore, in these cases, the latest specification is shown along with the previous version, if one is an EN and the other a TS. In the same way, EN versions of the same specification will also be updated, replacing a TS in some cases. Release 2.2 specifications were functionally frozen after the 52nd TC TCCE meeting in October 2018. Release 2.2 specifications contain corrections and enhancements to Release 2.1 including a major development of the Inter System Interface specifications to develop separate specifications for IP and PSS1 over E.1 transport layers as well as transport layer independent parts. NOTE 1: Functionally frozen means that no further functionality/features may be incorporated into the set of specifications, and that only corrective Change Requests (CRs) are to be accepted and agreed. NOTE 2: It can be expected that corrective CRs will be introduced into the Release 2.2 specifications. NOTE 3: Some of the CRs that will be produced will be for the next Release as they add new functionalities/features.
100 392-17-5	<empty>	TR	1.1.1	http://www.etsi.org/deliver/etsi_tr/100300_100399/1003921705/01.01.01_60/tr_1003921705v010101p.pdf	The present document identifies ETSI specifications for TETRA V+D and DMO Release 2.1. Release 2.0 specifications were functionally frozen after the 28th TC TETRA meeting in October 2006. Release 2.1 specifications contain corrections and enhancements to the Release 2.0 since publication of the Release 2.0 including TEDS Direct Access, Net Assist Protocol, Direct mode Over The Air Management protocol and new parts to the User Requirements Specification in addition to maintenance of the TETRA standards and reports. NOTE 1: Functionally frozen means that no further functionality/features may be incorporated into the set of specifications, and that only corrective Change Requests (CRs) are to be accepted and agreed. NOTE 2: It can be expected that corrective CRs will be introduced into the Release 2.1 specifications. NOTE 3: Some of the CRs that will be produced will be for the next Release as they add new functionalities/features. NOTE 4: Some of the documents were in Public Enquiry, One step Approval or National Voting stage at the publication of the present document. Due to those stages editorial modifications may be performed and the version number of the document may step up in the last digit in addition to the normal step-up due to publication or voting. The resulting version is also a part of the present Release 2.1.
100 283	Environmental Engineering (EE); Transient voltages at Interface "A" on telecommunications direct current (dc) power distributions	TR	2.2.1	http://www.etsi.org/deliver/etsi_tr/100200_100299/100283/02.02.01_60/tr_100283v020201p.pdf	Short duration transient disturbances can occur on dc power distributions when a short circuit fault occurs in part of that distribution. The energy contained in the transient can be sufficient to do considerable damage to equipment connected to the distribution unless measures are taken to suppress or absorb this energy. The present document examines the parameters of dc power distributions within the scope of EN 300 132-2 [1] that significantly contribute to the energy contained by a transient, discusses ways in which the transient can be controlled to reduce its harmful effects, and suggests ways in which the immunity of an electronic unit or a substantial telecommunications installation might be tested.
101 036-1	Fixed Radio Systems; Generic wordings for standards on DFRS (Digital Fixed Radio Systems) characteristics; Part 1: General aspects and point-to-point equipment parameters	TR	1.3.1	http://www.etsi.org/deliver/etsi_tr/101000_101099/10103601/01.03.01_60/tr_10103601v010301p.pdf	The present document defines the major issues for the standardization of the general aspects of Digital Fixed Radio Systems (DFRS) formerly known as Digital Radio Relay Systems (DRRS) and for point-to-point specific equipment parameters, in order to maintain a generic format for the editorial and technical contents. It is also essential to maintain a common understanding of the reasons behind the way certain parameters are defined among the various DFRS standards, which deal with the same general topics and may differ from each other merely from the point of view of numerical requirements. The present document therefore also explains the reasoning behind why the parameters in DFRS standards are defined in the way they are. The present document aims to cover every issue that may be required. Specific standards may differ from the guidelines contained within the present document only if the specific argument is not covered or there is good technical reason for not following them.
101 031	Broadband Radio Access Networks (BRAN); HIgh PErformance Radio Local Area Network (HIPERLAN) Type 2; Requirements and architectures for wireless broadband access	TR	2.2.1	http://www.etsi.org/deliver/etsi_tr/101000_101099/101031/02.02.01_60/tr_101031v020201p.pdf	The scope of the present document is limited to the requirements and architectures for HIPERLAN Types 2. HIPERLAN Type1 is addressed by ETS 300 652 [2] and its related Conformance Test Specifications, [2a], [2b], [2c] and [2d]. HIPERLINK will be described in a TR produced by BRAN. The requirements address subjects like applications, traffic volumes and traffic patterns that underlie the projected spectrum requirements as well as the chosen architectures. The architectures address the communications layer models as well as the Reference models that identify the key interfaces subject to standardization. The architectures developed in the present document are intended to delineate the boundaries between HIPERLAN standards and standards for networks in which HIPERLANs may be used as subsystems or components. Scope of standardization The scope of the standards for HIPERLAN Types 2 is limited to the air interface specifications, the Data Link Control (DLC) layer specifications, the specifications of the management functions and the interworking functions. The DLC layer specification includes a specification of the services to be provided. The ETSI HIPERLAN/2 standards specify subsystems up to and including the DLC Layer. Interworking functions will be specified in liaison with other relevant technical standardization bodies.
101 035	Transmission and Multiplexing (TM); Synchronous Digital Hierarchy (SDH) aspects regarding Digital Radio Relay Systems (DRRS)	TR	1.1.3	http://www.etsi.org/deliver/etsi_tr/101000_101099/101035/01.01.03_60/tr_101035v010103p.pdf	Future Digital Radio Relay Systems (DRRS) have to support the Synchronous Digital Hierarchy (SDH) defined by the ITU-T. Study Group (SG) 9 of the ITU-R in its final meeting in September 1989 approved a new report (CCIR Report 1190 [3]) dealing with general aspects of DRRS in an SDH Network and containing a list of items which need further study. Moreover, SG 9 has established Task Group (TG) 9/1 to study these very urgent aspects in the period between the meetings and to conclude its work before the next Interim Meeting of SG 9. TG 9/1 ended its duty in 1992 producing ITU-R Recommendations F.750 [1] and F.751 [2]. It was deemed very important that the items listed in section 7 of CCIR Report 1190 [3] will be carefully studied by TM4 as an urgent task and some clear statements produced.
101 034	Methods for Testing and Specification (MTS); Reports on experiments in validation methodology; PISN Cordless Terminal Mobility Incoming Call Additional Network Feature (ANF-CTMI)	TR	1.1.1	http://www.etsi.org/deliver/etsi_tr/101000_101099/101034/01.01.01_60/tr_101034v010101p.pdf
101 031	Radio Equipment and Systems (RES); HIgh PErformance Radio Local Area Network (HIPERLAN); Requirements and architectures for Wireless ATM Access and Interconnection	TR	1.1.1	http://www.etsi.org/deliver/etsi_tr/101000_101099/101031/01.01.01_60/tr_101031v010101p.pdf	The scope of the present document is limited to the requirements and architectures for HIPERLAN Types 2. HIPERLAN Type1 is addressed by ETS 300 652 [2] and its related Conformance Test Specifications, [2a], [2b], [2c] and [2d]. HIPERLINK will be described in a TR produced by BRAN. The requirements address subjects like applications, traffic volumes and traffic patterns that underlie the projected spectrum requirements as well as the chosen architectures. The architectures address the communications layer models as well as the Reference models that identify the key interfaces subject to standardization. The architectures developed in the present document are intended to delineate the boundaries between HIPERLAN standards and standards for networks in which HIPERLANs may be used as subsystems or components. Scope of standardization The scope of the standards for HIPERLAN Types 2 is limited to the air interface specifications, the Data Link Control (DLC) layer specifications, the specifications of the management functions and the interworking functions. The DLC layer specification includes a specification of the services to be provided. The ETSI HIPERLAN/2 standards specify subsystems up to and including the DLC Layer. Interworking functions will be specified in liaison with other relevant technical standardization bodies.
100 035	Environmental Engineering (EE); Environmental engineering; Guidance and terminology	TR	2.1.2	http://www.etsi.org/deliver/etsi_tr/100001_100099/100035/02.01.02_60/tr_100035v020102p.pdf	The present document has the aim of giving the user the following information: • an explanation of the main environmental concepts and terminology with examples; • the purpose and use of environmental classes; • the testing philosophy relating to environmental classes and equipment characteristics; • the principles underlying environmental specifications.
100 028-2	Electromagnetic compatibility and Radio spectrum Matters (ERM); Uncertainties in the measurement of mobile radio equipment characteristics; Part 2	TR	1.4.1	http://www.etsi.org/deliver/etsi_tr/100001_100099/10002802/01.04.01_60/tr_10002802v010401p.pdf	The present document provides a method to be applied to all the applicable deliverables, and supports TR 100 027 [1]. It covers the following aspects relating to measurements: a) methods for the calculation of the total uncertainty for each of the measured parameters; b) recommended maximum acceptable uncertainties for each of the measured parameters; c) a method of applying the uncertainties in the interpretation of the results. The present document provides the methods of evaluating and calculating the measurement uncertainties and the required corrections on measurement conditions and results (these corrections are necessary in order to remove the errors caused by certain deviations of the test system due to its known characteristics (such as the RF signal path attenuation and mismatch loss, etc.)).
100 028-1	Electromagnetic compatibility and Radio spectrum Matters (ERM); Uncertainties in the measurement of mobile radio equipment characteristics; Part 1	TR	1.4.1	http://www.etsi.org/deliver/etsi_tr/100001_100099/10002801/01.04.01_60/tr_10002801v010401p.pdf	The present document provides a method to be applied to all the applicable deliverables, and supports TR 100 027 [2]. It covers the following aspects relating to measurements: a) methods for the calculation of the total uncertainty for each of the measured parameters; b) recommended maximum acceptable uncertainties for each of the measured parameters; c) a method of applying the uncertainties in the interpretation of the results. The present document provides the methods of evaluating and calculating the measurement uncertainties and the required corrections on measurement conditions and results (these corrections are necessary in order to remove the errors caused by certain deviations of the test system due to its known characteristics (such as the RF signal path attenuation and mismatch loss, etc.)).
100 027	ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); Methods of measurement for private mobile radio equipment	TR	1.2.1	http://www.etsi.org/deliver/etsi_tr/100001_100099/100027/01.02.01_60/tr_100027v010201p.pdf	The test methods contained within the present document are intended for use in determining the electrical characteristics of radio equipment in the mobile radio services. A further aim is to give guidance to both manufacturers and type testing authorities so that common test methods can be adopted leading, potentially, to mutual acceptance of test results. Parameter limits specific to a particular equipment can be found in the relevant ETS (European Telecommunication Standard) or EN (European Standard, Telecommunications series). In the drive towards uniformity, the measurement of a specific equipment parameter has, basically, only one test method although, procedurally, minor differences may exist due to the type of test site used e.g. a ground reflection test site (Anechoic Chamber with a ground plane or Open Area Test Site) requires a vertical height scan to achieve maximum coupling between transmitter and receiver whereas a "non-reflecting" environment (Anechoic Chamber) does not. The methods apply to constant envelope frequency-modulated or phase-modulated systems as chosen by each administration operating on radio frequencies between 30 MHz and 1 000 MHz and with channel separations of 12,5 kHz, 20 kHz and 25 kHz. Test methods are given which are applicable to radio equipment capable of transmission and/or reception of analogue speech, bit stream and messages. Included in the present document are test method for radio equipment fitted with external 50 ΩRF connectors (for antennas), temporary external 50 ΩRF connectors and integral antennas. Wherever possible, if the electrical characteristics are not expected to be changed, test measurements should be performed by use of a direct connection (via either the permanent or temporary external 50 ΩRF connector) to the radio equipment as stated in each ETS or EN in order to attempt to minimize measurement uncertainties.

101 173

Broadband Radio Access Networks (BRAN); Inventory of broadband radio technologies and techniques

TR

1.1.1

http://www.etsi.org/deliver/etsi_tr/101100_101199/101173/01.01.01_60/tr_101173v010101p.pdf

The scope of the present document is identification of technologies and techniques and their characteristics that may prove suitable for the implementation of the physical, Data Link Control (DLC) and subnetwork convergence functions of BRAN as identified in TR 101 031 [4] and TR 101 177 [5]. The BRAN Project is intended to provide specifications for these networks. The technologies and techniques identified should support the main characteristics of these networks: high data rate, high capacity and uncoordinated deployment. Bringing together these technologies and techniques in a single document facilitates evaluation of their relative merits as well as facilitating the composition and evaluation of combinations. The present document is not intended to be inclusive or complete: it reflects a state of the art at the beginning of the standardization process. Much of the material is derived from private and public research projects in the field of broadband radio systems. Examples are the EU ACTS projects AWACS, MEDIAN, SAMBA and Magic WAND and the German ATMmobil project.

101 112

Universal Mobile Telecommunications System (UMTS); Selection procedures for the choice of radio transmission technologies of the UMTS (UMTS 30.03 version 3.2.0)

TR

3.2.0

http://www.etsi.org/deliver/etsi_tr/101100_101199/101112/03.02.00_60/tr_101112v030200p.pdf

This ETSI Technical Report (TR) establishes the technical procedure for the comparative evaluation of candidate technologies for the UTRA. The UTRA includes the handling of the representative bearers as defined in UMTS 21.01 [1], i.e. Open System Interconnection (OSI) layers 1-3. It establishes the criteria based upon the requirements contained in UMTS 21.01 [1]. The primary purpose of this [report] is to facilitate the comparison of different candidates between milestones M1 and M2 of the UTRA definition procedure (Refinement and synthesis phase). It will also be used after milestone M2 (Definition phase) and in the submission of the candidate to ITU. The scope of this report is not to make the actual choice but to define how the technical evaluation will be performed.

101 147

Environmental Engineering (EE); Interworking between Direct Current/Isolated (DC/I) and Direct Current/Common (DC/C) electrical power systems

TR

1.2.1

http://www.etsi.org/deliver/etsi_tr/101100_101199/101147/01.02.01_60/tr_101147v010201p.pdf

The present document describes and establishes simplified models of the different sections of the ground distribution network constituting the DC/I and the DC/C electrical power systems. These models are interworked to identify the common impedance where DC power supply currents can circulate (interconnection between DC/C and DC/I, DC/C and DC/C, DC/I and DC/I). These results allow the establishment of some basic engineering advice that should be applied to guarantee the good behaviour when interconnecting two systems. These precautions are given for functionality reasons: • the noise immunity of the pre-existing system and of the links between the system and the MDF should be conserved; and safety aspects: • the screens of signal cables between the pre-existing system and the Main Distribution Frame (MDF), the conductors and the connections of the pre-existing system have to withstand additional currents.

101 110

Digital cellular telecommunications system (Phase 2+) (GSM); Characterisation, test methods and quality assessment for handsfree Mobile Stations (MSs) (GSM 03.58 version 6.0.1 Release 1997)

TR

6.0.1

http://www.etsi.org/deliver/etsi_tr/101100_101199/101110/06.00.01_60/tr_101110v060001p.pdf

The present document gives some guidelines to implement test methods and to evaluate the transmission quality of handsfree Mobile Stations (MSs). The normative characteristics and test methods for handsfree Mobile Stations (MSs are defined in GSM 03.50). The present document gives additional data. It includes summaries of texts or contributions presented and discussed during the meetings of ad hoc group SMG2/03.50 on environmental conditions, speech processing and quality assessment for handsfree Mobile Station. The items covered by this report are mainly. - Environmental conditions for handsfree Mobile Stations. - Speech processing techniques and consequences on delay. - Speech quality assessment for handsfree implementing acoustic echo cancellation and noise reduction.

101 130

ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); Study of the feasibility for standardizing Self-organizing Time Division Multiple Access (STDMA) system requirements

TR

1.1.1

http://www.etsi.org/deliver/etsi_tr/101100_101199/101130/01.01.01_60/tr_101130v010101p.pdf

101 105

Digital cellular telecommunications system (Phase 2+); Fraud Information Gathering System (FIGS); Service requirements - Stage 0 (GSM 01.31 version 8.0.0 Release 1999)

TR

8.0.0

http://www.etsi.org/deliver/etsi_tr/101100_101199/101105/08.00.00_60/tr_101105v080000p.pdf

The present document describes the requirements (at a stage 0 level) of the Fraud Information Gathering System (FIGS). FIGS provides the means for the HPLMN to monitor a defined set of subscriber activities. The aim is to enable service providers/network operators to use FIGS, and service limitation controls such as Operator Determined Barring (ODB) and Immediate Service Termination (IST), to limit their financial exposure to large unpaid bills produced on subscriber accounts whilst the subscriber is roaming outside their HPLMN. HPLMNs may also choose to collect information on subscriber activities whilst their subscribers are within the HPLMN.

101 122

Network Aspects (NA); Numbering and addressing for Number Portability

TR

1.1.1

http://www.etsi.org/deliver/etsi_tr/101100_101199/101122/01.01.01_60/tr_101122v010101p.pdf

The present document is to analyse the impact of Service Provider Portability on Geographic and non-geographic numbers and number formats used at the Network Termination Point (NTP) and also at the Point Of Interconnection (POI) between networks in a multi-vendor environment. Routeing requirements are analysed and numbers and number formats are derived as a consequence.

101 127

Transmission and Multiplexing (TM); Digital Radio Relay Systems (DRRS); Synchronous Digital Hierarchy (SDH); High capacity DRRS carrying SDH signals (1 x STM-1) in frequency bands with about 30 MHz channel spacing and using Co-Channel Dual Polarized (CCDP) operation

TR

1.1.1

http://www.etsi.org/deliver/etsi_tr/101100_101199/101127/01.01.01_60/tr_101127v010101p.pdf

101 101

Methods for Testing and Specification (MTS); TTCN interim version including ASN.1 1994 support [ISO/IEC 9646-3] (Second Edition Mock-up for JTC1/SC21 Review)

TR

1.1.1

http://www.etsi.org/deliver/etsi_tr/101100_101199/101101/01.01.01_60/tr_101101v010101p.pdf

101 094

Broadband Integrated Services Digital Network (B-ISDN); ATM for the transport of 64 kbit/s narrowband channels

TR

1.1.1

http://www.etsi.org/deliver/etsi_tr/101000_101099/101094/01.01.01_60/tr_101094v010101p.pdf

101 092

Network Aspects (NA); Report on Carrier Selection

TR

1.1.1

http://www.etsi.org/deliver/etsi_tr/101000_101099/101092/01.01.01_60/tr_101092v010101p.pdf

101 088

Network Aspects (NA); Cordless Terminal Mobility (CTM): Numbering and Identifying

TR

1.1.1

http://www.etsi.org/deliver/etsi_tr/101000_101099/101088/01.01.01_60/tr_101088v010101p.pdf

101 085

Digital cellular telecommunications system (Phase 2+) (GSM); Performance characterization of the GSM Enhanced Full Rate (EFR) speech codec (GSM 06.55 version 8.0.0 Release 1999)

TR

8.0.0

http://www.etsi.org/deliver/etsi_tr/101000_101099/101085/08.00.00_60/tr_101085v080000p.pdf

The present document gives background information on the performance of the GSM enhanced full rate speech codec. Experimental results from the Pre-selection and Verification tests carried out during the standardization process by the SEG (Speech Expert Group) are reported to give a more detailed picture of the behaviour of the GSM enhanced full rate speech codec under different conditions of operation.

101 085

Digital cellular telecommunications system (Phase 2+) (GSM); Performance characterization of the GSM Enhanced Full Rate (EFR) speech codec (GSM 06.55 version 7.0.0 Release 1998)

TR

7.0.0

http://www.etsi.org/deliver/etsi_tr/101000_101099/101085/07.00.00_60/tr_101085v070000p.pdf

The present document gives background information on the performance of the GSM enhanced full rate speech codec. Experimental results from the Pre-selection and Verification tests carried out during the standardization process by the SEG (Speech Expert Group) are reported to give a more detailed picture of the behaviour of the GSM enhanced full rate speech codec under different conditions of operation.

101 085

Digital cellular telecommunications system (Phase 2+) (GSM); Performance characterization of the GSM Enhanced Full Rate (EFR) speech codec (GSM 06.55 version 6.0.0 Release 1997)

TR

6.0.0

http://www.etsi.org/deliver/etsi_tr/101000_101099/101085/06.00.00_60/tr_101085v060000p.pdf

The present document gives background information on the performance of the GSM enhanced full rate speech codec. Experimental results from the Pre-selection and Verification tests carried out during the standardization process by the SEG (Speech Expert Group) are reported to give a more detailed picture of the behaviour of the GSM enhanced full rate speech codec under different conditions of operation.

101 085

Digital cellular telecommunications system (Phase 2) (GSM); Performance characterization of the GSM Enhanced Full Rate (EFR) speech codec (GSM 06.55 version 4.0.0)

TR

4.0.0

http://www.etsi.org/deliver/etsi_tr/101000_101099/101085/04.00.00_60/tr_101085v040000p.pdf

The present document gives background information on the performance of the GSM enhanced full rate speech codec. Experimental results from the Pre-selection and Verification tests carried out during the standardization process by the SEG (Speech Expert Group) are reported to give a more detailed picture of the behaviour of the GSM enhanced full rate speech codec under different conditions of operation.

101 083

Network Aspects (NA); CEC Green Paper; Numbering Policy for Telecommunications Services in Europe

TR

1.1.1

http://www.etsi.org/deliver/etsi_tr/101000_101099/101083/01.01.01_60/tr_101083v010101p.pdf

101 081

Methods for Testing and Specification (MTS); Strategy for the use of formal SDL for descriptive purposes in ETSI products

TR

1.1.1

http://www.etsi.org/deliver/etsi_tr/101000_101099/101081/01.01.01_60/tr_101081v010101p.pdf

101 079

Network Aspects (NA); Routeing of calls to pan-European services using European Telephony Numbering Space (ETNS)

TR

1.1.1

http://www.etsi.org/deliver/etsi_tr/101000_101099/101079/01.01.01_60/tr_101079v010101p.pdf

101 078

Network Aspects (NA); Public Switched Telephone Network (PSTN); General aspects of standardization of PSTN services related to the transfer of identification information over the PSTN

TR

1.1.1

http://www.etsi.org/deliver/etsi_tr/101000_101099/101078/01.01.01_60/tr_101078v010101p.pdf

101 077

Intelligent Network (IN); IN Capability Set 2 (CS2); IN intra domain management requirements for IN CS2

TR

1.1.1

http://www.etsi.org/deliver/etsi_tr/101000_101099/101077/01.01.01_60/tr_101077v010101p.pdf

101 075

Digital cellular telecommunications system (Phase 2) (GSM); Base Station and ancillary equipment; Physical and electrical parameters; Application of standards and guidance notes (GSM 11.22 version 4.2.0)

TR

4.2.0

http://www.etsi.org/deliver/etsi_tr/101000_101099/101075/04.02.00_60/tr_101075v040200p.pdf

The present document applies to any Base Station System type or part of a Base Station System and co-located equipment and equipment sites, unless otherwise stated. It applies regardless of ownership or responsibility for installation and maintenance of the equipment or network. The document does assume some previous knowledge of the subject matter and in some areas specialist understanding may be required. The present document addresses the following information: - product requirement overview; - equipment sites and installations; - general applicable specifications; - acoustic noise; - construction; - earthing and bonding; - environmental Conditions; - lightning protection; - power supplies; - reliability/Dependability; - specific applicable specifications for product release; - EMC; - type approval.

101 074

European Numbering Task Force; Management of the European Telephony Numbering Space (ETNS)

TR

1.1.1

http://www.etsi.org/deliver/etsi_tr/101000_101099/101074/01.01.01_60/tr_101074v010101p.pdf

101 073

Number portability for pan-European services

TR

1.1.1

http://www.etsi.org/deliver/etsi_tr/101000_101099/101073/01.01.01_60/tr_101073v010101p.pdf

101 072

Digital Enhanced Cordless Telecommunications (DECT); Global System for Mobile communications (GSM); DECT/GSM integration based on dual-mode terminals

TR

1.1.1

http://www.etsi.org/deliver/etsi_tr/101000_101099/101072/01.01.01_60/tr_101072v010101p.pdf

101 056

Human Factors (HF); European Numbering Task Force (ENTF); Human Factors aspects of the European Telephony Numbering Space (ETNS)

TR

1.1.1

http://www.etsi.org/deliver/etsi_tr/101000_101099/101056/01.01.01_60/tr_101056v010101p.pdf

101 054

Security Algorithms Group of Experts (SAGE); Rules for the management of the HIPERLAN Standard Encryption Algorithm (HSEA)

TR

1.1.1

http://www.etsi.org/deliver/etsi_tr/101000_101099/101054/01.01.01_60/tr_101054v010101p.pdf

101 051

Methods for Testing and Specification (MTS); Report of the CATG applications

TR

1.1.1

http://www.etsi.org/deliver/etsi_tr/101000_101099/101051/01.01.01_60/tr_101051v010101p.pdf

The present document describes the experiences gained from the application of the CATG functionality of the SDL tool available at ETSI (SDT Autolink tool) on the SDL specification of Core INAP CS-2. The SDLs of Core INAP, attached as annex A to [3], gives the normative requirements of the protocol behaviour. The SDLs also makes use of the ASN.1 definitions of the INAP PDUs, therefore providing a complete specification of the protocol suitable for application of CATG.

101 041-2

Human Factors (HF); European harmonization of network generated tones; Part 2: Listing and analysis of European, World and Standardized tones

TR

1.1.1

http://www.etsi.org/deliver/etsi_tr/101000_101099/10104102/01.01.01_60/tr_10104102v010101p.pdf

101 041-1

Human Factors (HF); European harmonization of network generated tones; Part 1: A review and recommendations

TR

1.1.1

http://www.etsi.org/deliver/etsi_tr/101000_101099/10104101/01.01.01_60/tr_10104101v010101p.pdf

101 036-2

Fixed Radio Systems; Generic wordings for standards on DRRS (Digital Radio Relay Systems) characteristics; Part 2: Point-to-multipoint equipment parameters

TR

1.1.1

http://www.etsi.org/deliver/etsi_tr/101000_101099/10103602/01.01.01_60/tr_10103602v010101p.pdf

The present document defines the major standardizable issues for Point-to-Multipoint digital radio-relay systems (P-MP) in the Fixed Service in order to maintain a generic format for the editorial and technical contents. It also give guidelines for the understanding of the definition of the parameters and elements. The present document aims to cover every issue that may be required. Specific standards may differ from the guidelines contained within the present document only if the specific argument is not covered or there is good technical reason for not following them. It is essential to maintain a common understanding of the reasons behind the way certain parameters are defined among the various P-MP standards, which deal with the same general topics and may differ from each other by the application of different access methods or merely from the point of view of numerical requirements. Because some of the parameters and elements are also common to Point-to-Point (P-P) digital radio-relay systems part 1 [1] of the present document should be taken into account when referenced below. The present document is applicable to the wording (generic) of Point-to-Multipoint equipment parameters. The known access methods applied to P-MP systems in the Fixed Service and the access methods to come in the future and combinations thereof implies that subparts of the present document are edited in order to maintain the commonality among the P-MP standards but to leave the way open for future P-MP technologies. Thus for every access method a subpart should be edited defining the specific parameters and when there is a new access method it should be added to the existing TR.

100 392-17-4

Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 17: TETRA V+D and DMO specifications; Sub-part 4: Release 2.0

TR

1.1.1

http://www.etsi.org/deliver/etsi_tr/100300_100399/1003921704/01.01.01_60/tr_1003921704v010101p.pdf

The present document identifies ETSI specifications for TETRA V+D and DMO Release 2.0. Release 2.0 specifications were functionally frozen after the 28th TC TETRA meeting in October 2006. NOTE 1: Functionally frozen means that no further functionality/features may be incorporated into the set of specifications, and that only corrective Change Requests (CRs) are to be accepted and agreed. NOTE 2: It can be expected that corrective CRs will be introduced into the Release 2.0 specifications. NOTE 3: Some of the CRs that will be produced will be for the next Release as they add new functionalities/features. NOTE 4: Some of the documents were in Public Enquiry, One step Approval or National Voting stage at the publication of the present document. Due to those stages editorial modifications may be performed and the version number of the document may step up in the last digit in addition to the normal step-up due to publication or voting. The resulting version is also a part of the present Release 2.0.

100 392-17-3

Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 17: TETRA V+D and DMO specifications; Sub-part 3: Release 1.3

TR

1.2.1

http://www.etsi.org/deliver/etsi_tr/100300_100399/1003921703/01.02.01_60/tr_1003921703v010201p.pdf

The present document identifies ETSI specifications for TETRA V+D and DMO Release 1.3. Release 1.3 specifications were functionally frozen after the 26th TC TETRA meeting in October 2005. NOTE 1: Functionally frozen means that no further functionality/features may be incorporated into the set of specifications, and that only corrective Change Requests (CRs) are to be accepted and agreed. NOTE 2: It can be expected that corrective CRs will be introduced into the Release 1.3 specifications. NOTE 3: Some of the CRs that will be produced will be for the next Release as they add new functionalities/features. NOTE 4: Some of the documents were in Public Enquiry, One step Approval or National Voting stage at the publication of the present document. Due to those stages editorial modifications may be performed and the version number of the document may step up in the last digit in addition to the normal step-up due to publication or voting. The resulting version is also a part of the present Release 1.3.

100 392-17-2

<empty>

TR

1.1.1

http://www.etsi.org/deliver/etsi_tr/100300_100399/1003921702/01.01.01_60/tr_1003921702v010101p.pdf

The present document identifies ETSI specifications for TETRA V+D and DMO Release 1.2. Release 1.2 specifications were functionally frozen after the 21st EP TETRA meeting in June 2003. NOTE 1: Functionally frozen means that no further functionality/features may be incorporated into the set of specifications, and that only corrective Change Requests (CRs) are to be accepted and agreed. NOTE 2: It can be expected that corrective CRs will be introduced into the Release 1.2 specifications. NOTE 3: Some of the CRs that will be produced will be for the next release as they add new functionalities/features. NOTE 4: Some of the documents were in Public Enquiry, One step Approval or National Voting stage at the publication of the present document. Due to those stages editorial modifications may be performed and the version number of the document may step up in the last digit in addition to the normal step-up due to publication or voting. The resulting version is also a part of the present Release 1.2.

100 392-17-1

Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 17: TETRA V+D and DMO specifications; Sub-part 1: Release 1.1

TR

1.1.3

http://www.etsi.org/deliver/etsi_tr/100300_100399/1003921701/01.01.03_60/tr_1003921701v010103p.pdf

The present document identifies ETSI specifications for TETRA V+D and DMO Release 1.1. Release 1.1 specifications were functionally frozen after the 14th EP TETRA meeting in March 2001. NOTE 1: Functionally frozen means that no further functionality/features may be incorporated into the set of specifications, and that only corrective Change Requests (CRs) are to be accepted and agreed. NOTE 2: It can be expected that corrective CRs will be introduced into the Release 1.1 specifications throughout year 2001. NOTE 3: Some of the CRs that will be produced during 2001 will be for the next release as they add new functionalities/features. NOTE 4: Only published documents are included into this release 1.1.

100 287

Television systems; Code of practice for enhanced Teletext

TR

1.2.1

http://www.etsi.org/deliver/etsi_tr/100200_100299/100287/01.02.01_60/tr_100287v010201p.pdf

The present document is intended as a companion document to the full specification, EN 300 706 [1], defining the data and transmission format within enhanced Teletext systems. It is primarily aimed at Teletext editors, service providers and network operators. The intention is to explain in relatively simple terms the new display features and possibilities that are available with enhanced Teletext. The focus is very much on which parts of a large and complex specification have to be implemented to produce a Teletext service that is more visually attractive than has been possible previously. The present document outlines the basic features of enhanced Teletext and highlights the key parameters for a successful service. It makes recommendations as to how aspects of the specifications should be implemented and suggests strategies to maximize the transmission efficiency of the additional data that will be required. It should be noted that the present document was compiled in advance of any first-hand experience in editing or operating an enhanced Teletext service. It is anticipated that a subsequent version will be able to draw upon the knowledge and experience that operating real services will bring.

101 028

Methods for Testing and Specification (MTS); Survey on the Use of Test Specifications produced by ETSI

TR

1.1.1

http://www.etsi.org/deliver/etsi_tr/101000_101099/101028/01.01.01_60/tr_101028v010101p.pdf

101 023-2

Methods for Testing and Specification (MTS); Application of object-oriented SDL features in B-ISDN specifications

TR

1.1.1

http://www.etsi.org/deliver/etsi_tr/101000_101099/10102302/01.01.01_60/tr_10102302v010101p.pdf

101 023-1

Methods for Testing and Specification (MTS); Portability of SDL specifications

TR

1.1.1

http://www.etsi.org/deliver/etsi_tr/101000_101099/10102301/01.01.01_60/tr_10102301v010101p.pdf

101 020

Transmission and Multiplexing (TM); Synchronous Digital Hierarchy (SDH); SDH project status report for 1996

TR

1.2.1

http://www.etsi.org/deliver/etsi_tr/101000_101099/101020/01.02.01_60/tr_101020v010201p.pdf

101 019

User requirements; Mobility; Interworking and interoperability between networks

TR

1.1.1

http://www.etsi.org/deliver/etsi_tr/101000_101099/101019/01.01.01_60/tr_101019v010101p.pdf

101 016

Transmission and Multiplexing (TM); Digital Radio Relay Systems (DRRS); Comparison and verification of performance prediction models

TR

1.1.1

http://www.etsi.org/deliver/etsi_tr/101000_101099/101016/01.01.01_60/tr_101016v010101p.pdf

100 815

Digital Video Broadcasting (DVB); Guidelines for the handling of Asynchronous Transfer Mode (ATM) signals in DVB systems

TR

1.1.1

http://www.etsi.org/deliver/etsi_tr/100800_100899/100815/01.01.01_60/tr_100815v010101p.pdf

The present document provides the mapping scheme to be used for the transport of ATM cells over MPEG-2 Transport Stream packets. The purpose of encapsulating ATM cells directly into an MPEG-2 transport stream is to: • interconnect ATM networks via DVB systems or provide ATM services to end-users using DVB systems; • offer differentiated quality of service to end-users by utilizing the ATM mechanisms. The main constraints of this problem are to: • providing an efficient encapsulation mechanism; • maintaining DVB/MPEG-2 compatibility when transporting ATM cells; • respecting ATM Quality-of-Service requirements throughout DVB/MPEG systems.

100 392-17-6

TETRA and Critical Communications Evolution (TCCE); Part 17: TETRA V+D, DMO and associated specifications; Sub-part 6: Release 2.2

TR

1.2.1

http://www.etsi.org/deliver/etsi_tr/100300_100399/1003921706/01.02.01_60/tr_1003921706v010201p.pdf

The present document identifies ETSI specifications and reports for TETRA V+D and DMO Release 2.2. It also includes ETSI specifications and reports relating to Critical Communications evolution undertaken by TC TCCE as well as relevant specifications produced by other ETSI technical committees. The present document is a revision of ETSI TR 100 392-17-6 V1.1.1 published in 2018 and contains the specifications and reports that have been produced since then. ENs relating to TETRA specifications are often updated by first introducing an ETSI Technical Specification (TS) which will contain new features and change requests. Therefore, in these cases, the latest specification is shown along with the previous version, if one is an EN and the other a TS. In the same way, EN versions of the same specification will also be updated, replacing a TS in some cases. Release 2.2 specifications were functionally frozen after the 52nd TC TCCE meeting in October 2018. Release 2.2 specifications contain corrections and enhancements to Release 2.1 including a major development of the Inter System Interface specifications to develop separate specifications for IP and PSS1 over E.1 transport layers as well as transport layer independent parts. NOTE 1: Functionally frozen means that no further functionality/features may be incorporated into the set of specifications, and that only corrective Change Requests (CRs) are to be accepted and agreed. NOTE 2: It can be expected that corrective CRs will be introduced into the Release 2.2 specifications. NOTE 3: Some of the CRs that will be produced will be for the next Release as they add new functionalities/features.

100 392-17-5

<empty>

TR

1.1.1

http://www.etsi.org/deliver/etsi_tr/100300_100399/1003921705/01.01.01_60/tr_1003921705v010101p.pdf

The present document identifies ETSI specifications for TETRA V+D and DMO Release 2.1. Release 2.0 specifications were functionally frozen after the 28th TC TETRA meeting in October 2006. Release 2.1 specifications contain corrections and enhancements to the Release 2.0 since publication of the Release 2.0 including TEDS Direct Access, Net Assist Protocol, Direct mode Over The Air Management protocol and new parts to the User Requirements Specification in addition to maintenance of the TETRA standards and reports. NOTE 1: Functionally frozen means that no further functionality/features may be incorporated into the set of specifications, and that only corrective Change Requests (CRs) are to be accepted and agreed. NOTE 2: It can be expected that corrective CRs will be introduced into the Release 2.1 specifications. NOTE 3: Some of the CRs that will be produced will be for the next Release as they add new functionalities/features. NOTE 4: Some of the documents were in Public Enquiry, One step Approval or National Voting stage at the publication of the present document. Due to those stages editorial modifications may be performed and the version number of the document may step up in the last digit in addition to the normal step-up due to publication or voting. The resulting version is also a part of the present Release 2.1.

100 283

Environmental Engineering (EE); Transient voltages at Interface "A" on telecommunications direct current (dc) power distributions

TR

2.2.1

http://www.etsi.org/deliver/etsi_tr/100200_100299/100283/02.02.01_60/tr_100283v020201p.pdf

Short duration transient disturbances can occur on dc power distributions when a short circuit fault occurs in part of that distribution. The energy contained in the transient can be sufficient to do considerable damage to equipment connected to the distribution unless measures are taken to suppress or absorb this energy. The present document examines the parameters of dc power distributions within the scope of EN 300 132-2 [1] that significantly contribute to the energy contained by a transient, discusses ways in which the transient can be controlled to reduce its harmful effects, and suggests ways in which the immunity of an electronic unit or a substantial telecommunications installation might be tested.

101 036-1

Fixed Radio Systems; Generic wordings for standards on DFRS (Digital Fixed Radio Systems) characteristics; Part 1: General aspects and point-to-point equipment parameters

TR

1.3.1

http://www.etsi.org/deliver/etsi_tr/101000_101099/10103601/01.03.01_60/tr_10103601v010301p.pdf

The present document defines the major issues for the standardization of the general aspects of Digital Fixed Radio Systems (DFRS) formerly known as Digital Radio Relay Systems (DRRS) and for point-to-point specific equipment parameters, in order to maintain a generic format for the editorial and technical contents. It is also essential to maintain a common understanding of the reasons behind the way certain parameters are defined among the various DFRS standards, which deal with the same general topics and may differ from each other merely from the point of view of numerical requirements. The present document therefore also explains the reasoning behind why the parameters in DFRS standards are defined in the way they are. The present document aims to cover every issue that may be required. Specific standards may differ from the guidelines contained within the present document only if the specific argument is not covered or there is good technical reason for not following them.

101 031

Broadband Radio Access Networks (BRAN); HIgh PErformance Radio Local Area Network (HIPERLAN) Type 2; Requirements and architectures for wireless broadband access

TR

2.2.1

http://www.etsi.org/deliver/etsi_tr/101000_101099/101031/02.02.01_60/tr_101031v020201p.pdf

The scope of the present document is limited to the requirements and architectures for HIPERLAN Types 2. HIPERLAN Type1 is addressed by ETS 300 652 [2] and its related Conformance Test Specifications, [2a], [2b], [2c] and [2d]. HIPERLINK will be described in a TR produced by BRAN. The requirements address subjects like applications, traffic volumes and traffic patterns that underlie the projected spectrum requirements as well as the chosen architectures. The architectures address the communications layer models as well as the Reference models that identify the key interfaces subject to standardization. The architectures developed in the present document are intended to delineate the boundaries between HIPERLAN standards and standards for networks in which HIPERLANs may be used as subsystems or components. Scope of standardization The scope of the standards for HIPERLAN Types 2 is limited to the air interface specifications, the Data Link Control (DLC) layer specifications, the specifications of the management functions and the interworking functions. The DLC layer specification includes a specification of the services to be provided. The ETSI HIPERLAN/2 standards specify subsystems up to and including the DLC Layer. Interworking functions will be specified in liaison with other relevant technical standardization bodies.

101 035

Transmission and Multiplexing (TM); Synchronous Digital Hierarchy (SDH) aspects regarding Digital Radio Relay Systems (DRRS)

TR

1.1.3

http://www.etsi.org/deliver/etsi_tr/101000_101099/101035/01.01.03_60/tr_101035v010103p.pdf

Future Digital Radio Relay Systems (DRRS) have to support the Synchronous Digital Hierarchy (SDH) defined by the ITU-T. Study Group (SG) 9 of the ITU-R in its final meeting in September 1989 approved a new report (CCIR Report 1190 [3]) dealing with general aspects of DRRS in an SDH Network and containing a list of items which need further study. Moreover, SG 9 has established Task Group (TG) 9/1 to study these very urgent aspects in the period between the meetings and to conclude its work before the next Interim Meeting of SG 9. TG 9/1 ended its duty in 1992 producing ITU-R Recommendations F.750 [1] and F.751 [2]. It was deemed very important that the items listed in section 7 of CCIR Report 1190 [3] will be carefully studied by TM4 as an urgent task and some clear statements produced.

101 034

Methods for Testing and Specification (MTS); Reports on experiments in validation methodology; PISN Cordless Terminal Mobility Incoming Call Additional Network Feature (ANF-CTMI)

TR

1.1.1

http://www.etsi.org/deliver/etsi_tr/101000_101099/101034/01.01.01_60/tr_101034v010101p.pdf

101 031

Radio Equipment and Systems (RES); HIgh PErformance Radio Local Area Network (HIPERLAN); Requirements and architectures for Wireless ATM Access and Interconnection

TR

1.1.1

http://www.etsi.org/deliver/etsi_tr/101000_101099/101031/01.01.01_60/tr_101031v010101p.pdf

The scope of the present document is limited to the requirements and architectures for HIPERLAN Types 2. HIPERLAN Type1 is addressed by ETS 300 652 [2] and its related Conformance Test Specifications, [2a], [2b], [2c] and [2d]. HIPERLINK will be described in a TR produced by BRAN. The requirements address subjects like applications, traffic volumes and traffic patterns that underlie the projected spectrum requirements as well as the chosen architectures. The architectures address the communications layer models as well as the Reference models that identify the key interfaces subject to standardization. The architectures developed in the present document are intended to delineate the boundaries between HIPERLAN standards and standards for networks in which HIPERLANs may be used as subsystems or components. Scope of standardization The scope of the standards for HIPERLAN Types 2 is limited to the air interface specifications, the Data Link Control (DLC) layer specifications, the specifications of the management functions and the interworking functions. The DLC layer specification includes a specification of the services to be provided. The ETSI HIPERLAN/2 standards specify subsystems up to and including the DLC Layer. Interworking functions will be specified in liaison with other relevant technical standardization bodies.

100 035

Environmental Engineering (EE); Environmental engineering; Guidance and terminology

TR

2.1.2

http://www.etsi.org/deliver/etsi_tr/100001_100099/100035/02.01.02_60/tr_100035v020102p.pdf

The present document has the aim of giving the user the following information: • an explanation of the main environmental concepts and terminology with examples; • the purpose and use of environmental classes; • the testing philosophy relating to environmental classes and equipment characteristics; • the principles underlying environmental specifications.

100 028-2

Electromagnetic compatibility and Radio spectrum Matters (ERM); Uncertainties in the measurement of mobile radio equipment characteristics; Part 2

TR

1.4.1

http://www.etsi.org/deliver/etsi_tr/100001_100099/10002802/01.04.01_60/tr_10002802v010401p.pdf

The present document provides a method to be applied to all the applicable deliverables, and supports TR 100 027 [1]. It covers the following aspects relating to measurements: a) methods for the calculation of the total uncertainty for each of the measured parameters; b) recommended maximum acceptable uncertainties for each of the measured parameters; c) a method of applying the uncertainties in the interpretation of the results. The present document provides the methods of evaluating and calculating the measurement uncertainties and the required corrections on measurement conditions and results (these corrections are necessary in order to remove the errors caused by certain deviations of the test system due to its known characteristics (such as the RF signal path attenuation and mismatch loss, etc.)).

100 028-1

Electromagnetic compatibility and Radio spectrum Matters (ERM); Uncertainties in the measurement of mobile radio equipment characteristics; Part 1

TR

1.4.1

http://www.etsi.org/deliver/etsi_tr/100001_100099/10002801/01.04.01_60/tr_10002801v010401p.pdf

The present document provides a method to be applied to all the applicable deliverables, and supports TR 100 027 [2]. It covers the following aspects relating to measurements: a) methods for the calculation of the total uncertainty for each of the measured parameters; b) recommended maximum acceptable uncertainties for each of the measured parameters; c) a method of applying the uncertainties in the interpretation of the results. The present document provides the methods of evaluating and calculating the measurement uncertainties and the required corrections on measurement conditions and results (these corrections are necessary in order to remove the errors caused by certain deviations of the test system due to its known characteristics (such as the RF signal path attenuation and mismatch loss, etc.)).

100 027

ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); Methods of measurement for private mobile radio equipment

TR

1.2.1

http://www.etsi.org/deliver/etsi_tr/100001_100099/100027/01.02.01_60/tr_100027v010201p.pdf

The test methods contained within the present document are intended for use in determining the electrical characteristics of radio equipment in the mobile radio services. A further aim is to give guidance to both manufacturers and type testing authorities so that common test methods can be adopted leading, potentially, to mutual acceptance of test results. Parameter limits specific to a particular equipment can be found in the relevant ETS (European Telecommunication Standard) or EN (European Standard, Telecommunications series). In the drive towards uniformity, the measurement of a specific equipment parameter has, basically, only one test method although, procedurally, minor differences may exist due to the type of test site used e.g. a ground reflection test site (Anechoic Chamber with a ground plane or Open Area Test Site) requires a vertical height scan to achieve maximum coupling between transmitter and receiver whereas a "non-reflecting" environment (Anechoic Chamber) does not. The methods apply to constant envelope frequency-modulated or phase-modulated systems as chosen by each administration operating on radio frequencies between 30 MHz and 1 000 MHz and with channel separations of 12,5 kHz, 20 kHz and 25 kHz. Test methods are given which are applicable to radio equipment capable of transmission and/or reception of analogue speech, bit stream and messages. Included in the present document are test method for radio equipment fitted with external 50 ΩRF connectors (for antennas), temporary external 50 ΩRF connectors and integral antennas. Wherever possible, if the electrical characteristics are not expected to be changed, test measurements should be performed by use of a direct connection (via either the permanent or temporary external 50 ΩRF connector) to the radio equipment as stated in each ETS or EN in order to attempt to minimize measurement uncertainties.