id
stringlengths 7
13
| title
stringlengths 7
396
| type
stringclasses 2
values | version
stringclasses 245
values | url
stringlengths 90
98
| scope
stringlengths 0
83.8k
|
|---|---|---|---|---|---|
101 730
|
Publication of interface specification under R&TTE directive 1999/5/EC; Guidelines for describing analogue interfaces
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101700_101799/101730/01.01.01_60/tr_101730v010101p.pdf
|
The purpose of the present document is to assist the public network operators and public service providers in producing interface publications according to Article 4.2 of Directive 1999/5/EC [1]. The present document lists the parameters of the analogue interface to the public telecommunications network which could be necessary for a description of that interface.The present document does not give guidance on the presentation format of interface publications to be made by PNOs The interface types dealt with are as follows: • Analogue Access to PSTN. • Analogue leased lines, 2 wire and 4 wire. Indirect access to services and networks are also covered in the present document. The timing and other administrative issues of publications are not covered in the present document.
|
101 794
|
Private Integrated Services Network (PISN); Wireless Terminal Mobility (WTM); WTM between networks; Requirements
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101700_101799/101794/01.01.01_60/tr_101794v010101p.pdf
|
The present document identifies various requirements for a mobility service that allow users with Wireless Terminals (WTs) to freely move beyond the domain of their home network and still be able to access the telecommunication services of their own Private Integrated Services Network (PISN), also called the home network. The WTM service described in the present document builds upon/extends the WTM service defined for a single PISN found in the following standards: - ISO/IEC 15428 Wireless Terminal Location Registration supplementary services; - ISO/IEC 15430 Wireless Terminal Call Handling supplementary services; - ISO/IEC 15432 Wireless Terminal Authentication supplementary services. The intended use of each of the requirements is briefly described in the present document. The requirements are restricted to a WTM service that is provided to private WTM users only regardless where the WTM user may be roaming in his own PISN, to another PISN or into a public telecommunications network supporting WTM. Inter-working in terms of mobility (e.g. roaming, which may imply identification, authentication and location handling) with analogue networks is outside the scope of the present document. Requirements for CTM users roaming from a public network into a PISN are, however, outside the scope of the present document. The document also indicates how some of the requirements may be put together in order to provide a WTM service of a certain ambition level. Charging principles are not discussed in the present document. The present document also contains a roadmap for converting existing regional and international standards for wireless terminal mobility in private networks into a unified set of international standards. The proposed roadmap also suggests how new international standards within this filed should be developed.
|
101 865
|
Satellite Earth Stations and Systems (SES); Satellite component of UMTS/IMT-2000; General aspects and principles
|
TR
|
1.2.1
|
http://www.etsi.org/deliver/etsi_tr/101800_101899/101865/01.02.01_60/tr_101865v010201p.pdf
|
The present document describes the general aspects and principles that apply to satellite systems intended to be an integral part of the Universal Mobile Telecommunications System (UMTS)/IMT-2000. The S-UMTS systems considered in the present document are expected to provide a comprehensive range of satellite services, mainly derived from the terrestrial UMTS network, to a range of mobile terminals including pocket phones, PDA types, car mounted plug-in and nomadic terminals. Also the use of intermediate module repeaters (IMR) to improve coverage is highlighted. Evaluating the implication on the IP level completes the document. The ETSI TC-SES S-UMTS Working Group provides a forum to develop voluntary S-UMTS/IMT-2000 specifications.
|
101 778
|
Methods for Testing and Specification (MTS); Technical quality of telecommunications standards; Complementary methods and technical quality manual
|
TR
|
1.1.2
|
http://www.etsi.org/deliver/etsi_tr/101700_101799/101778/01.01.02_60/tr_101778v010102p.pdf
|
The present document is the outcome of continuing studies in TC MTS aimed at improving the technical quality of standards (and other types of deliverable) drafted in ETSI Technical Bodies. It contains a description of a set of macros operating under the ETSI-approved word processor Microsoft Word 7™contained in Office 95™. These macros are designed to: - combine advice with a tool that automated routine tasks for rapporteurs’ and so made their work easier and more interesting; - provide automated tools that help to improve the consistency of documents and provide a different perspective that enables errors to be noticed more easily; - provide a solution that is used on screen in association with the draft deliverable rather than advice that is in separate reports and so remains unread. Tutorial advice conforms to the ETSI Drafting Rules [1]. The whole output of the STF is contained in this template. The present document is adds no additional information to that contained in the template.
|
101 857
|
Access and Terminals (AT); Broadband access to the Public Telecommunications Network; Publication of interface specification under Directive 1999/5/EC, art. 4.2; Guidelines for describing Multimedia Cable Network Interfaces
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101800_101899/101857/01.01.01_60/tr_101857v010101p.pdf
|
The purpose of the present document is to assist the Public Network Operators and Public Service Providers sharing the Telecommunications physical support with Broadcast systems based on cable technologies in producing publications that describe their public interfaces in accordance with article 4.2 of the Radio Equipment and Telecommunications Terminal Equipment (R&TTE) Directive 1999/5/EC [1]. The present document lists in special the characteristics of a broadband cable multimedia interface to the Public Telecommunications Network which could be necessary for a description of that interface but does not give guidance on the style of presentation of interface publications. The present document makes also reference to the most relevant ETSI deliverables in the case where the network interface offered uses other technologies. The present document is applicable to interface specifications for new, modified and existing interfaces. The present document does not specify how any proprietary interfaces details, which are not already in the public domain, are published. The present document does not specify which interfaces should be published, neither does it address the timing of publication, as these functions are clearly the responsibility of the National Regulatory Authorities. The process of publication is not covered in the present document.
|
101 854
|
Fixed Radio Systems; Point-to-point equipment; Derivation of receiver interference parameters useful for planning fixed service point-to-point systems operating different equipment classes and/or capacities
|
TR
|
2.1.1
|
http://www.etsi.org/deliver/etsi_tr/101800_101899/101854/02.01.01_60/tr_101854v020101p.pdf
|
The present document gives, initially, a basic overview of how a fixed point-to-point system is allocated an EIRP guaranteeing predetermined link availability. It then reviews the methodology for deriving the parameters necessary for the sharing of FS systems in an environment with different equipment classes and capacity. The methodology is based on the limitation of noise and is not exclusive. In addition a method for calculation of RSL based on normalized values is presented. The present document highlights the primary parameters from European standards, which are vital to the development of an assignment system. These parameters are: • Transmitter radiation patterns. • Receiver sensitivity. • Receiver adjacent channel rejection. • Receiver co-channel rejection. In addition to these parameters the antenna radiation profile and, if fitted, the ATPC operating characteristics will have a major effect on link density.
|
101 694
|
Asynchronous Transfer Mode (ATM); Provision of internet applications via ATM based networks and interworking with IP networks
|
TR
|
3.0.2
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/101694/03.00.02_60/tr_101694v030002p.pdf
| |
101 771
|
Telecommunications and Internet protocol Harmonization Over Networks (TIPHON) Release 4; Service Independent requirements definition; Threat Analysis
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101700_101799/101771/01.01.01_60/tr_101771v010101p.pdf
|
The present document provides a comprehensive analysis of security threats to the TIPHON environment as described in principle in TS 101 313 [9]. It includes a definition of the security objectives, a description of the assets within the TIPHON environment, a list of threats to the TIPHON environment, a risk assessment, and a recommendation of the necessary security countermeasures. TIPHON compliant systems bring together IP-based and SCN-based communications. Therefore it is recommended to comply with a certain level of security. Because of the well-known threats and counter-measures in the SCN, the present document focuses primarily on the IP-internal, IP-to-SCN functions. The following network elements form the simplified TIPHON architecture as described in principle in TS 101 313 [9] for ITU-T Recommendation H.323 [12] to SCN interworking, which is used as basis for the present document: • Terminals; • Call control element, e.g. Gatekeeper; • Admission control element, e.g. User Profile; • Decomposed Inter-technology gateway consisting of: - Media Gateway Controller; - Media Gateway; - Signalling Gateway. Where appropriate the guidelines for conduct of a threat analysis described in ETR 332 [1] are followed. It is intended to expand the present document to cover additional functions and services in a future edition to cover the extended TIPHON environment described by TS 101 314 ed1 (for TIPHON release 2), for TS 101 314 ed2 (TIPHON release 3) and also in TS 101 882 [17] (TIPHON release 3) as an examination of threats against meta-protocols.
|
101 767
|
Human Factors (HF); Symbols to identify telecommunications facilities for deaf and hard of hearing people; Development and evaluation
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101700_101799/101767/01.01.01_60/tr_101767v010101p.pdf
|
The present document reports the background research, symbols development and evaluation undertaken to create a European Standard on symbols to identify telecommunications facilities for the deaf and hard of hearing. The symbols defined in the final standard will be applicable to all telecommunications equipment that provide the defined facilities and assistive technologies that are intended to support the deaf and hard of hearing".
|
101 764
|
Broadband Radio Access Networks (BRAN); Definition of the BRAN domain
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101700_101799/101764/01.01.01_60/tr_101764v010101p.pdf
|
The present document describes the structure of the BRAN domain within the common domain of the ETSI object identifier tree as defined in EG 200 351 [1].
|
101 835
|
Telecommunications and Internet Protocol Harmonization over Networks (TIPHON); Project method definition
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101800_101899/101835/01.01.01_60/tr_101835v010101p.pdf
|
The present document defines the specification development process to be used to ensure the TIPHON project develops coherent specifications in a timely manner. The present document is applicable to members of the TIPHON project, working group chairs, work item rapporteurs and the TIPHON Project Management Committee. It should be referenced when planning work to be undertaken by the project.
|
101 689-1
|
Transmission and Multiplexing (TM); Terms and definitions in transport networks; Part 1: Core networks
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/10168901/01.01.01_60/tr_10168901v010101p.pdf
|
The present document lists the preferred definitions and abbreviations relevant to core network standardization within ETSI Working Group TM1. The definitions and abbreviations have been extracted from the documents shown in clause 2 with the following exceptions: - ETS 300 681 [1] is not included as this will be taken into account in TR 101 689-2. - In the case of ETS 200 232 [2], the definitions and abbreviations given in ITU-T Recommendation G.957 [3] apply. - All the work on optical fibre and optical components (see [23]-[32]) has been excluded since, once published by ETSI, the output is taken over by CENELEC and the relevant I-ETSs are withdrawn. It is assumed that CENELEC resolve any issues related to definitions and abbreviations in those documents. - ETR 247 [36] is not included as this is a highly specialized report, the definitions and abbreviations of which only apply within that particular document. - [37] is also excluded as no electronic version exists and it is felt that the content would be more relevant to the work of CENELEC. The definitions and abbreviations relevant to the work of working party B of former working group TM3 will be included in the present document at a later date.
|
101 740
|
Security algorithms Group of Experts (SAGE); Rules of the management of the standard GSM GPRS Encryption Algorithm 2 (GEA2)
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101700_101799/101740/01.01.01_60/tr_101740v010101p.pdf
|
The purpose of the present document is to specify the rules for the management of the Standard GSM GPRS Encryption Algorithm 2 (GEA2). The management structure is defined in clause 4. This structure is defined in terms of the principals involved in the management of the GEA2 (ETSI, ETSI SMG, GEA2 Custodian and Approved Recipients) together with the relationships and interactions between them. The procedures for delivering the GEA2 to Approved Recipients are defined in clause 5. This clause is supplemented by Annex A which specifies the items which are to be delivered. Clause 6 is concerned with the criteria for approving an organization for receipt of the GEA2 and with the responsibilities of an Approved Recipient. This clause is supplemented by Annex B which contains a Confidentiality and Restricted Usage Undertaking to be signed by each Approved Recipient. Clause 7 is concerned with the appointment and responsibilities of the GEA2 Custodian. The specification of the GEA2 consists of the following three documents: 1) Specification of the GPRS Encryption Algorithm 2 (GEA2) Document 1: Algorithm Specification. 2) Specification of the GPRS Encryption Algorithm 2 (GEA2) Document 2: Design Conformance Test Data. 3) Specification of the GPRS Encryption Algorithm 2 (GEA2) Document 3: Algorithm Input/Output Test Data. The rules for management as described in the present document apply for Document 1 and Document 2 only. Document 3 will be a publicly available document and its distribution will not be subject to any rules.
|
101 734
|
Internet Protocol (IP) based networks; Parameters and mechanisms for charging
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101700_101799/101734/01.01.01_60/tr_101734v010101p.pdf
|
The present document gives guidance in selecting charging parameters and the appropriate charging mechanisms in the IP (Internet Protocol) based networks of the future. In the today's Internet there is no detailed collection of charges implemented. Users are charged by the Internet Service Provider (ISP) either: • a flat rate; • a time dependent rate; or • a volume class dependent rate. In addition the telecommunication service to access the ISP is charged by the Telecommunication Network Operator. Such charging schemes will persist but with the emergence of the Internet - especially with the evolution towards commercial operation - the need arises to collect charging information for diverse services. These charges may be composed of various parameters and components according to the service split among several operators. The present document concentrates on such cases only where parameters are collected. Therefore, the present document describes a first set of parameters relevant for charging and the mechanisms needed for collection of charging information in IP based networks. The general principles for charging are listed which apply to IP based networks. These parameters are applicable to all types of IP based services. Nevertheless an appropriate set of parameters can be selected for each type. Collection of charging information will be done both by network operators and service providers for the usage of resources. The present document describes parameters and mechanisms from a technical point of view. Therefore, the term "operator" is used throughout the present document where it is applicable to service providers, to network operators, or to both service providers and network operators. Accounting, tariffing and billing of IP based services are outside the scope of the present document. Nevertheless these issues are also of great interest for IP based networks and services. Accounting (or settlement) is currently discussed in ITU-T Study Group 3 and for the Internet Telephony Service in ETSI Project TIPHON.
|
101 728
|
Access and Terminals (AT); Study for the specification of low pass filter section of POTS/ADSL splitters
|
TR
|
1.2.1
|
http://www.etsi.org/deliver/etsi_tr/101700_101799/101728/01.02.01_60/tr_101728v010201p.pdf
|
The present document provides the basis for specification of requirements and test methods for the low pass section of POTS/ADSL splitters. These splitters are intended to be installed at the Local Exchange side of the local loop and at the user side near the NTP. The splitter at the user side may be part of the network or part of the user installation but will be always used to connect an access network using ADSL technology as described in ETR 328 [1] with a typical home installation. The present document does not cover the possible advantages and disadvantages of the ownership of the splitter e.g. by the network operator, the user or a third party. The present document covers most common situations to ensure a reasonable performance of this technology and facilitate the launch of such systems. The high pass filter function of the splitter is not within the scope of the present document.
|
101 802
|
Speech Processing, Transmission and Quality Aspects (STQ); The Concept of Relative Levels
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101800_101899/101802/01.01.01_60/tr_101802v010101p.pdf
|
The present document gives guidance on "good engineering practice" with respect to relative levels.
|
101 714
|
Digital cellular telecommunications system (Phase 2+) (GSM); Performance Characterization of the GSM Adaptive Multi-Rate (AMR) speech codec (GSM 06.75 version 7.2.0 Release 1998)
|
TR
|
7.2.0
|
http://www.etsi.org/deliver/etsi_tr/101700_101799/101714/07.02.00_60/tr_101714v070200p.pdf
|
The present document provides background information on the performances of the GSM Adaptive Multi-Rate (AMR) speech codec. Experimental test results from the Verification and Characterisation phases of testing are reported to illustrate the behaviour of the GSM AMR in multiple operational conditions.
|
101 672
|
Management services provided by Public Network Operators (PNOs) or service providers; Review of user needs for standardization; Tutorial and recommendations
|
TR
|
1.1.6
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/101672/01.01.06_60/tr_101672v010106p.pdf
|
The present document aims to identify the user's needs regarding the management of networks and services provided by the PNOs or Service providers, how this information should be presented and what are the tools needed for managing this information properly. At the same time relevant information is provided to the users as a guidance. As usual interest and requirements in this area may differ strongly depending upon the category of user. It is clear that the business users are the most interested in this issue but, with the development of competition, other categories of users should also adopt at least some of these requirements in the near future.
|
101 667
|
Methods for Testing and Specification (MTS); Network Integration Testing (NIT); Interconnection; Reasons and goals for a global service testing approach
|
TR
|
1.1.2
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/101667/01.01.02_60/tr_101667v010102p.pdf
|
The goal of the present document is to provide basic information on the goals and possible areas of application of the Network Integration/Interconnection Testing (NIT) methodology. NIT is a network specific testing approach, originally defined by EURESCOM, according to which NIT Test Suites can be designed, implemented, and eventually used for tests and trials, in different network contexts and with different goals. NIT can be used, at an extent, also for Network Interconnection Testing purposes, following bilateral agreements from Network Operators, and could be considered in a future in the framework of a possible regulation of such issues. NIT encompasses two basic types of testing, End to End and Node to Node, which are both discussed in detail in the present document.
|
101 666
|
Information technology Open Systems Interconnection Conformance testing methodology and framework; The Tree and Tabular Combined Notation (TTCN) (Ed. 2++)
|
TR
|
1.0.0
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/101666/01.00.00_60/tr_101666v010000p.pdf
|
The present document defines an informal test notation, called the Tree and Tabular Combined Notation (TTCN), for OSI conformance test suites, which is independent of test methods, layers and protocols, and which reflects the abstract testing methodology defined in ISO/IEC 9646-1 and ISO/IEC 9646-2. It also specifies requirements and provides guidance for using TTCN in the specification of system-independent conformance test suites for one or more OSI standards. It specifies two forms of the notation: one, a human-readable form, applicable to the production of conformance test suite standards for OSI protocols; and the other, a machine- processable form, applicable to processing within and between computer systems. The present document applies to the specification of conformance test cases that can be expressed abstractly in terms of control and observation of protocol data units and abstract service primitives. Nevertheless, for some protocols, test cases may be needed which cannot be expressed in these terms. The specification of such test cases is outside the scope of the present document, although those test cases may need to be included in a conformance test suite standard. For example, some static conformance requirements related to an application service may require testing techniques, which are specific to that particular application. The specification of test cases in which more than one behaviour description is to be run in parallel is dealt with by the concurrency features (particularly involving the definition of Test Components and Test Component Configurations). The present document specifies requirements on what a test suite standard may specify about a conforming realization of the test suite, including the operational semantics of TTCN test suites. The present document applies to the specification of conformance test suites for OSI protocols in OSI layers 2 to 7, specifically including Abstract Syntax Notation One (ASN.1) based protocols. The following are outside the scope of the present document: a) the specification of conformance test suites for Physical layer protocols; b) the relationship between TTCN and formal description techniques; c) the means of realization of executable test suites (ETS) from abstract test suites. The present document defines mechanisms for using concurrency in the specification of abstract test cases. Concurrency in TTCN is applicable to the specification of test cases: a) in a multi-party testing context; b) which handle multiplexing and demultiplexing in either a single-party or multi-party testing context; c) which handle splitting and recombining in either a single-party or multi-party testing context; d) in a single-party testing context when the complexity of the protocol or set of protocols handled by the IUT is such that concurrency can simplify the specification of the test case. TTCN modules are defined to allow sharing of common TTCN specifications between test suites.
|
101 768
|
Public Switched Telephone Network (PSTN); Study on the generation of analogue ringing signals
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101700_101799/101768/01.01.01_60/tr_101768v010101p.pdf
|
The present document gives guidance on the different aspects of analogue ringing signals. The present document aims at listing the different parameters that must be taken into account when drafting specifications or other documentation on which analogue ringing signals have an impact or influence. The present document is also intended for use by terminal and network equipment designers. The present document is applicable to analogue ringing signals generated by subscriber line interface circuits (or other types of ringing generators) of exchanges, access networks, PABXs etc. be it for the public or private domain. The present document describes the electrical characteristics of analogue ringing signals.
|
101 690
|
Security Algorithms Group of Experts (SAGE); Rules for the management of the GSM CTS standard Autenthication and Key Generation Algorithms (CORDIAL)
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/101690/01.01.01_60/tr_101690v010101p.pdf
|
The purpose of the present document is to specify the rules for the management of the GSM Cordless Integrity Algorithms (CORDIAL). These algorithms are intended for providing authentication, key generation and integrity services in GSM Cordless Telephony products. The actual specification for CORDIAL is confidential and will not be published. It consists of the following three documents: Document 1: Algorithm specification; Document 2: Design conformance test data; Document 3: Algorithm input/output test data. The procedures described in the present document apply to Document 1 and Document 2 of the specifications. The Documents 1 and 2 are confidential and their distribution will be controlled as described in the present document. Document 3 of the specification is not confidential and can be obtained directly from the CORDIAL Custodian (see subclause 5.3). There are no restrictions on the distribution of this Document 3 of the specification. The management structure is defined in clause 4. This structure is defined in terms of the principals involved in the management of the CORDIAL specification (ETSI, ETSI SMG/SMG10, CORDIAL Custodian and approved recipients) together with the relationships and interactions between them. The procedures for delivering the CORDIAL specification to approved recipients are defined in clause 5. This clause is supplemented by annex A which specifies the items which are to be delivered. Clause 6 is concerned with the criteria for approving an organization for receipt of the CORDIAL specification and with the responsibilities of an approved recipient. This clause is supplemented by annex B which contains a Confidentiality and Restricted Usage Undertaking to be signed by each approved recipient. Clause 7 is concerned with the appointment and responsibilities of the CORDIAL Custodian.
|
101 689-3
|
Transmission and Multiplexing (TM); Terms and definitions in transport networks; Part 3: Fixed Radio Systems
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/10168903/01.01.01_60/tr_10168903v010101p.pdf
|
The present document lists the preferred definitions and abbreviations relevant to fixed radio system standardization within ETSI Working Group TM4. The definitions and abbreviations have been extracted from the documents shown in clause 2.
|
101 803-10
|
<empty>
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101800_101899/10180310/01.01.01_60/tr_10180310v010101p.pdf
|
The present document is a technical report keeping the state of the early development done on the transport of IP over DTM. It gives insight into how things can be done, but is not complete enough to become a standard, so the status is reported so that further work can make use of this knowledge. The present document describes how IP traffic can be carried over a DTM network. Specifically, the mapping between IP and DTM is described and the system environment in which it operates. It further describes two services to carry IP traffic over a DTM, topology based forwarding and flow based forwarding. The first service is based on hop-by-hop IP forwarding where the DTM transport is used as a flexible transport technology. The connectivity between the IP/DTM interworking functions is established (where IP routing functions are connected to DTM networks) by network management. This achieves an IP network overlaid on the DTM infrastructure. The IP overlay network is semi permanent as is usually the case for transport networks. For this service, the present document covers the adaptation of the IP traffic on to the connections and mechanisms for establishing the connections. User IP traffic will then be routed over the overlay IP network by the IP routers. In the second service, the IP/DTM interworking function sets up a specific connection to other IP/DTM interworking functions "on-demand" across a DTM network to provide a dedicated connection for streaming IP traffic across the DTM network. These are referred to as dynamic channels. This service provides the capability to ensure, for example, traffic isolation, low latency and low packet loss for a specific IP flow. The standard describes the adaptation of IP traffic on to the channels, channel setup and connection modification. The present document currently only defines the mechanisms for setting up channels with one sender and one receiver.
|
101 689-2
|
Transmission and Multiplexing (TM); Terms and definitions in transport networks; Part 2: Access networks
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/10168902/01.01.01_60/tr_10168902v010101p.pdf
|
The present document lists the definitions and abbreviations relevant to access network standardization, found in publicly available documents prepared by ETSI working groups TM6 and former working group TM3, working party A. For each of the ETSI documents shown in clause 2, the definitions and abbreviations have been extracted and placed in the present document. If there are any amendments to a document, the definitions, symbols and abbreviations used in this amendment are listed under the subclause referring to the main document Following this, the definitions, symbols and abbreviations have each been sorted in alphabetical order and exact duplications have been deleted. Definitions of general terms, re-defined in one document in a specific way for the purpose of the present document have been written in a more generic form, possible restrictions concerning to this specific document however, have been added. If the same acronym is used for different terms used in different environments, both of the acronyms are printed in bold letters. All organizational abbreviations (e.g. CENELEC, ITU) have been removed.
|
101 748
|
Digital cellular telecommunications system (Phase 2+) (GSM); Abbreviations and acronyms (GSM 01.04 version 7.0.0 Release 1998)
|
TR
|
7.0.0
|
http://www.etsi.org/deliver/etsi_tr/101700_101799/101748/07.00.00_60/tr_101748v070000p.pdf
|
The present document provides the abbreviations and acronyms to be used throughout the GSM specifications. All abbreviations are presented in the singular, but are equally applicable to the plural.
|
101 686
|
Hybrid Fibre Coax (HFC) access networks; Interworking with B-ISDN networks
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/101686/01.01.01_60/tr_101686v010101p.pdf
|
The present document defines the interworking between HFC networks on one side and the B-ISDN on the other side.
|
101 685
|
Transmission and Multiplexing (TM); Timing and synchronization aspects of Asynchronous Transfer Mode (ATM) networks
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/101685/01.01.01_60/tr_101685v010101p.pdf
|
The present document gives guidance on timing and synchronization aspects and defines requirements for ATM Networks. This includes a model of network interactions as well as a simplified model of the function on which most requirements will be assigned, i.e., the Interworking Function (IWF). In relation to the models and requirements, different synchronization methods are described on an overview level. The present document provides recommendations on the applications when different methods are most suitable.
|
101 683
|
Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; System Overview
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/101683/01.01.01_60/tr_101683v010101p.pdf
|
........................................................................................................................................................5
|
101 680
|
Methods for Testing and Specification (MTS); A harmonized integration of ASN.1, TTCN and SDL
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/101680/01.01.01_60/tr_101680v010101p.pdf
|
The present document defines the changes that need to made to ASN.1, SDL and TTCN in order to harmonize these three languages in a consistent and compatible manner. The technical solutions to achieve this harmonization are based on the initial analysis of TR 101 114 [8]. The present document is restricted to documenting in broad terms the changes necessary to each of the three languages. The actual changes to the relevant standards (if accepted) will need to be performed by the relevant committees in ETSI, the ITU-T and ISO. While the present document offers complete technical solutions for harmonization, it is not written in the form of detailed amendments to the relevant standards. The present document is restricted to harmonizing the versions of ASN.1, SDL and TTCN as listed in the references clauses.
|
101 673
|
Technical Framework for the Provision of Interoperable ATM Services; Overview
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/101673/01.01.01_60/tr_101673v010101p.pdf
|
The present document is an overview of a set of specifications [1] to [5] defining the network-network interface to enable service interoperability between ATM networks. This will be achieved through adequate specification of network-network interfaces in the following planes: - the Network User and Control Planes; - the Network Management Plane. NOTE: The Network User, Control and Management planes are in accordance with the ITU-T Recommendation I.321 [6] defining the B-ISDN Protocol Reference Model. In particular the aims of the project are: - to focus on interoperable interfaces between networks, for the transport of User plane information, network control and network management information; - to allow for the interoperability of ATM networks by means of gateway functions, so that these networks can be developed independently; - to identify minimum technical standards to ensure secure interoperability; - to set up pragmatic phases to allow the systematic introduction of network and management capabilities.
|
101 672-1
|
Management services provided by Public Network Operators (PNOs) or service providers; Review of user needs for standardization; Part 1: Tutorial and recommendations
|
TR
|
1.1.5
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/10167201/01.01.05_60/tr_10167201v010105p.pdf
|
The present document aims to identify the user's needs regarding the management of networks and services provided by the PNOs or Service providers, how this information should be presented and what are the tools needed for managing this information properly. At the same time relevant information is provided to the users as a guidance. Part 2 of this Technical Report will propose functional specifications and the data model about the minimum set of users' requirements for telecommunications electronic billing. This standardization requirement does not preclude any operator from differentiating its marketing strategy built upon the standardized minimum set. As usual interest and requirements in this area may differ strongly depending upon the category of user. It is clear that the business users are the most interested in this issue but, with the development of competition, other categories of users should also adopt at least some of these requirements in the near future,.
|
101 665
|
Intelligent Network (IN); Service capability modelling for IN-CS4
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/101665/01.01.01_60/tr_101665v010101p.pdf
|
The present document is a first study on service capability modelling for IN CS-4. Clause 4 identifies the requirements for IN service modelling. Clause 5 lists some shortcomings of using IN CS-2 SIBs for IN service modelling. Clause 6 explains the rationale for applying object oriented techniques, followed by the introduction of some of these techniques in clause 7. Finally, clause 8 shows as an example how the object oriented approach can be applied to Video-on-Demand.
|
101 698
|
Number Portability Task Force (NPTF); Administrative support of service provider portability for geographic and non-geographic numbers
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/101698/01.01.01_60/tr_101698v010101p.pdf
|
The present document considers the inter-operator/service provider processes required to support Number Portability, in particular, the information transfer requirements. Processes include: - service establishment (including initial contact, planning, implementation & testing); - impact upon number administration; - customer porting (including requests, validation, scheduling, contingency planning, porting); - subsequent portability, cessation; - service maintenance (including network changes, introduction of new number ranges); - fault handling; - ancillary system processes (which may include billing, directory enquiries, emergency; - services, numbering plan administration and law enforcement agencies). The subsequent amendment to a porting order, or postponement to a porting order is outside the scope of the present document.
|
101 697
|
Number Portability Task Force (NPTF); Guidance on choice of network solutions for service provider portability for geographic and non-geographic numbers
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/101697/01.01.01_60/tr_101697v010101p.pdf
|
The present document is to analyse the interrelationships of the various technical components involved in providing service provider number portability and provide guidance on use in Europe between networks. NOTE: For the purpose of the present document, the term "Service Provider Number Portability" is used to describe Service Provider Portability for geographic and non-geographic numbers.
|
101 695
|
Integrated Services Digital Network (ISDN); Universal Mobile Telecommunications System (UMTS); ISDN-UMTS Framework
|
TR
|
3.1.1
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/101695/03.01.01_60/tr_101695v030101p.pdf
|
The scope of the present document is to provide information for the design of the system architecture of a "third generation" Universal Mobile Telecommunication System (UMTS) evolving from fixed networks. The present document focuses on the evolved fixed network and considers cordless access systems, wire-line access systems, and the UMTS radio access network (URAN) as developed by SMG. It caters for the following capabilities, features and scenarios: - support of an air interface with bit-rates of up to 2 Mbit/s; - flexible bandwidth allocation; - flexible QoS provision; - flexible service provision; - convergence of IT and Telecommunications; - convergence of fixed and mobile networks; - provision of seamless services where feasible when roaming between access domains and networks; - separation of Transport Networks and Control Networks.
|
101 664
|
Intelligent Network (IN); IN interconnect security features
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/101664/01.01.01_60/tr_101664v010101p.pdf
|
The present document describes security features which may be used in conjunction with the interconnection of two IN structured networks. The purpose of the present document is to establish a set of technical requirements in order to meet the threats identified and analysed in a previous document. Those main threats due to IN interworking between IN structured network operators and/or service providers using CS2 and CS3 are listed in clause 5. IN CS4 will not be taken into consideration. The security implications of the use of the SCF-SSF interface for interconnection have not been studied in the present document. That interface is studied in detail in DTR/NA-061208. The present document follows the successive steps: - listing important threats; - description of possible and existing security measures; - discussion on which security measures to use in order to meet the threats. The management aspects except those related to security policy are not included. They will be covered in EP TMN. From the list of threat extracted from TR 101 365 [3], it is important to meet the most important ones in order to get a secure IN interworking. The aim of the present document is to select a good set of security features in order to build a security architecture for IN wich is described in TR 101 365 [3].
|
101 662-1
|
Internet Access; V5.2 controlled Internet access in the Access Network (AN), phase 1; Part 1: Interface Specification
|
TR
|
1.1.2
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/10166201/01.01.02_60/tr_10166201v010102p.pdf
|
The present document describes scenarios whereby Internet traffic could bypass the local exchange by being routed in the Access Network directly to the Internet access services.
|
101 655
|
IMS Network Testing (INT); Report on the automatic conformance review during the IMS plugtest 2012; TTCN-3 based trace analysis of SIP and Diameter messages
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/101655/01.01.01_60/tr_101655v010101p.pdf
|
The present document presents a summary of experiences collected from the use of automatic interoperability testing in a real-world interoperability testing event at the RCS/VoLTE interoperability event held in Kranj (Slovenia) from 1st to 12th October, 2012. More specifically it addresses the use of test systems which have been developed based on the methodology and framework for automated interoperability testing for distributed systems EG 202 810 [i.1].
|
101 651
|
Classification of the electromagnetic environment conditions for equipment in telecommunication networks
|
TR
|
2.1.1
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/101651/02.01.01_60/tr_101651v020101p.pdf
|
The present document provides information on the electromagnetic environmental conditions encountered where telecommunications equipment is installed and is a compilation of data concerning electromagnetic environmental conditions. In the present document only locations for equipment that are in the telecommunication network are considered. Only some of the data is based on comprehensive environmental surveys. Such surveys are rarely reported in available literature. Consequently, estimated values are often used when the electromagnetic environmental conditions are stated. In order to characterize the electromagnetic environment, it is necessary to make certain assumptions on the installation practice. If these assumptions are not satisfied in a particular case, the environmental characteristic may not apply. Each environment is characterized in two ways: • by a short verbal description of its assumed attributes; • by a quantitative statement of the characteristic severities of the crucial environmental phenomena. It is only possible to specify the appropriate EMC requirements following the assessment of the severity of the electromagnetic environment. This in turn will be helpful in ensuring that the telecommunications network equipment has the sufficient intrinsic immunity to enable it to operate as intended in its environment.
|
101 651
|
ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); Classification of the electromagnetic environment conditions for equipment in telecommunication networks
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/101651/01.01.01_60/tr_101651v010101p.pdf
|
The present document provides information on the electromagnetic environmental conditions encountered where telecommunications equipment is installed and is a compilation of data concerning electromagnetic environmental conditions. In the present document only locations for equipment that are in the telecommunication network are considered. Only some of the data is based on comprehensive environmental surveys. Such surveys are rarely reported in available literature. Consequently, estimated values are often used when the electromagnetic environmental conditions are stated. In order to characterize the electromagnetic environment, it is necessary to make certain assumptions on the installation practice. If these assumptions are not satisfied in a particular case, the environmental characteristic may not apply. Each environment is characterized in two ways: • by a short verbal description of its assumed attributes; • by a quantitative statement of the characteristic severities of the crucial environmental phenomena. It is only possible to specify the appropriate EMC requirements following the assessment of the severity of the electromagnetic environment. This in turn will be helpful in ensuring that the telecommunications network equipment has the sufficient intrinsic immunity to enable it to operate as intended in its environment.
|
101 648
|
Telecommunications Management Network (TMN); Managed object modelling guidelines;
|
TR
|
1.2.1
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/101648/01.02.01_60/tr_101648v010201p.pdf
|
The present document provides guidelines for the definition of additional Managed Object Classes, the use of existing Managed Object Class definitions and the inclusion of these objects in existing inheritance and containment hierarchies. The present document: • Provides general rules for defining Managed Objects. • Provides general rules for defining Generic Object Classes. • Provides additional Guidelines on the use of GDMO. • Identifies relevant standards containing modelling guidelines, and identifies which clauses are recommended for use in ETSI models (for example where options exist). The present document does not: • Imply any specific system implementation. • Include testing the Information model.
|
101 643
|
Digital cellular telecommunications system (Phase 2+) (GSM); General network interworking scenarios (GSM 09.01 version 8.0.0 Release 1999)
|
TR
|
8.0.0
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/101643/08.00.00_60/tr_101643v080000p.pdf
|
The present document serves as an introduction to the GSM 09.xx-series. In clause 4, the technical requirements for Public Land Mobile Network (PLMN) interworking are introduced, and in clause 5 there is a summary of the contents of the GSM 09.xx-series.
|
101 643
|
Digital cellular telecommunications system (Phase 2+) (GSM); General network interworking scenarios (GSM 09.01 version 7.0.0 Release 1998)
|
TR
|
7.0.0
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/101643/07.00.00_60/tr_101643v070000p.pdf
|
The present document serves as an introduction to the GSM 09.xx-series. In clause 4, the technical requirements for Public Land Mobile Network (PLMN) interworking are introduced, and in clause 5 there is a summary of the contents of the GSM 09.xx-series.
|
101 643
|
Digital cellular telecommunications system (Phase 2+) (GSM); General network interworking scenarios (GSM 09.01 version 6.0.0 Release 1997)
|
TR
|
6.0.0
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/101643/06.00.00_60/tr_101643v060000p.pdf
|
The present document serves as an introduction to the GSM 09.xx-series. In clause 4, the technical requirements for Public Land Mobile Network (PLMN) interworking are introduced, and in clause 5 there is a summary of the contents of the GSM 09.xx-series.
|
101 641
|
Digital cellular telecommunications system (Phase 2+) (GSM); Half rate speech; Performance characterization of the GSM half rate speech codec (GSM 06.08 version 8.0.0 Release 1999)
|
TR
|
8.0.0
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/101641/08.00.00_60/tr_101641v080000p.pdf
|
The present document gives background information on the performance of the GSM half rate speech codec. Experimental results from the characterization and verification tests carried out during the selection process by the Traffic CHannel Half rate Speech (TCH-HS) expert group are reported to give a more detailed picture of the behaviour of the GSM half rate speech codec under different conditions of operation.
|
101 641
|
Digital cellular telecommunications system (Phase 2+) (GSM); Half rate speech; Performance characterization of the GSM half rate speech codec (GSM 06.08 version 7.0.0 Release 1998)
|
TR
|
7.0.0
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/101641/07.00.00_60/tr_101641v070000p.pdf
|
The present document gives background information on the performance of the GSM half rate speech codec. Experimental results from the characterization and verification tests carried out during the selection process by the Traffic CHannel Half rate Speech (TCH-HS) expert group are reported to give a more detailed picture of the behaviour of the GSM half rate speech codec under different conditions of operation.
|
101 641
|
Digital cellular telecommunications system (Phase 2+) (GSM); Half rate speech; Performance characterization of the GSM half rate speech codec (GSM 06.08 version 6.0.0 Release 1997))
|
TR
|
6.0.0
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/101641/06.00.00_60/tr_101641v060000p.pdf
|
The present document gives background information on the performance of the GSM half rate speech codec. Experimental results from the characterization and verification tests carried out during the selection process by the Traffic CHannel Half rate Speech (TCH-HS) expert group are reported to give a more detailed picture of the behaviour of the GSM half rate speech codec under different conditions of operation.
|
101 640
|
Digital cellular telecommunications system (Phase 2+); GSM Electro Magnetic Compatibility (EMC) considerations (GSM 05.90 version 6.0.1 Release 1997)
|
TR
|
6.0.1
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/101640/06.00.01_60/tr_101640v060001p.pdf
|
A considerable amount of work has been conducted, mainly in the UK, to investigate the effect of wanted radio frequency transmissions from GSM MS and BTS on other equipment. The present document aims to summarize this work and to look at the implications for GSM. Since GSM EMC considerations extend outside the GSM arena, it is thought essential that GSM considers the implications of EMC and produces the present document.
|
101 639
|
Digital cellular telecommunications system (Phase 2+) (GSM); Radio link management in hierarchical networks (GSM 05.22 version 8.0.0 Release 1999)
|
TR
|
8.0.0
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/101639/08.00.00_60/tr_101639v080000p.pdf
|
The present document gives examples for the Radio sub-system link control to be implemented in the Base Station System (BSS) and Mobile Switching Centre (MSC) of the GSM and DCS 1 800 systems in case hierarchical cell structures are employed. Unless otherwise specified, references to GSM also include DCS 1 800, and multiband systems if operated by a single operator.
|
101 639
|
Digital cellular telecommunications system (Phase 2+) (GSM); Radio link management in hierarchical networks (GSM 05.22 version 7.0.0 Release 1998)
|
TR
|
7.0.0
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/101639/07.00.00_60/tr_101639v070000p.pdf
|
The present document gives examples for the Radio sub-system link control to be implemented in the Base Station System (BSS) and Mobile Switching Centre (MSC) of the GSM and DCS 1 800 systems in case hierarchical cell structures are employed. Unless otherwise specified, references to GSM also include DCS 1 800, and multiband systems if operated by a single operator.
|
101 639
|
Digital cellular telecommunications system (Phase 2+) (GSM); Radio link management in hierarchical networks (GSM 05.22 version 6.0.0 Release 1997)
|
TR
|
6.0.0
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/101639/06.00.00_60/tr_101639v060000p.pdf
|
The present document gives examples for the Radio sub-system link control to be implemented in the Base Station System (BSS) and Mobile Switching Centre (MSC) of the GSM and DCS 1 800 systems in case hierarchical cell structures are employed. Unless otherwise specified, references to GSM also include DCS 1 800, and multiband systems if operated by a single operator.
|
101 635
|
Digital cellular telecommunications system (Phase 2+) (GSM); Example protocol stacks for interconnecting Service Centre(s) (SC) and Mobile-services Switching Centre(s) (MSC) (GSM 03.47 version 7.0.0 Release 1998)
|
TR
|
7.0.0
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/101635/07.00.00_60/tr_101635v070000p.pdf
|
No mandatory protocol between the Service Centre (SC) and the Mobile Switching Centre (MSC) below the transfer layer is specified by GSM; this is a matter of agreement between SC and PLMN operators. The present document specifies three approaches to the specification of protocol stacks of communication protocols for the purpose of relaying short messages and alerts between Short Message Service Centres and Gateway/Interworking MSCs (GMSC) for the Short Message Service (SMS). One approach is based upon use of the complete OSI reference model (see X.200), another approach is based upon the use of only the lower three OSI layers, and another approach is based upon the use of CCITT Signalling System No. 7 (see Q.700). Alternative protocol stacks are specified via ASN.1 encoding rules (see X.208 and X.209). These alternative protocol stacks are examples for the implementation of the Short Message Relay Layer (SM-RL). The requirements placed upon the Short Message Relay Layer are briefly described in clause 9 of GSM 03.40. Specifications are based upon individual contributions. Any judgement concerning functionality, completeness and advantages/disadvantages of implementation is intentionally omitted.
|
101 635
|
Digital cellular telecommunications system (Phase 2+) (GSM); Example protocol stacks for interconnecting Service Centre(s) (SC) and Mobile-services Switching Centre(s) (MSC) (GSM 03.47 version 6.0.0 Release 1997)
|
TR
|
6.0.0
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/101635/06.00.00_60/tr_101635v060000p.pdf
|
No mandatory protocol between the Service Centre (SC) and the Mobile Switching Centre (MSC) below the transfer layer is specified by GSM; this is a matter of agreement between SC and PLMN operators. The present document specifies three approaches to the specification of protocol stacks of communication protocols for the purpose of relaying short messages and alerts between Short Message Service Centres and Gateway/Interworking MSCs (GMSC) for the Short Message Service (SMS). One approach is based upon use of the complete OSI reference model (see X.200), another approach is based upon the use of only the lower three OSI layers, and another approach is based upon the use of CCITT Signalling System No. 7 (see Q.700). Alternative protocol stacks are specified via ASN.1 encoding rules (see X.208 and X.209). These alternative protocol stacks are examples for the implementation of the Short Message Relay Layer (SM-RL). The requirements placed upon the Short Message Relay Layer are briefly described in clause 9 of GSM 03.40. Specifications are based upon individual contributions. Any judgement concerning functionality, completeness and advantages/disadvantages of implementation is intentionally omitted.
|
101 634
|
Digital cellular telecommunications system (Phase 2+) (GSM); Support of Teletex in a GSM Public Land Mobile Network (PLMN) (GSM 03.44 version 7.0.0 Release 1998)
|
TR
|
7.0.0
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/101634/07.00.00_60/tr_101634v070000p.pdf
|
The present document describes the support of the teletex service by a GSM Public Land Mobile Network (PLMN).
|
101 634
|
Digital cellular telecommunications system (Phase 2+) (GSM); Support of Teletex in a GSM Public Land Mobile Network (PLMN) (GSM 03.44 version 6.0.0 Release 1997)
|
TR
|
6.0.0
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/101634/06.00.00_60/tr_101634v060000p.pdf
|
The present document describes the support of the teletex service by a GSM Public Land Mobile Network (PLMN).
|
101 633
|
Digital cellular telecommunications system (Phase 2+) (GSM); Support of Videotex (GSM 03.43 version 7.0.0 Release 1998)
|
TR
|
7.0.0
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/101633/07.00.00_60/tr_101633v070000p.pdf
|
The present document describes the support of Videotex service within the GSM PLMN network, taking into account the service definition as per CCITT Recommendation F.300 and Bearer Services specified in GSM 02.02 for a GSM PLMN.
|
101 633
|
Digital cellular telecommunications system (Phase 2+) (GSM); Support of Videotex (GSM 03.43 version 6.0.0 Release 1997)
|
TR
|
6.0.0
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/101633/06.00.00_60/tr_101633v060000p.pdf
|
The present document describes the support of Videotex service within the GSM PLMN network, taking into account the service definition as per CCITT Recommendation F.300 and Bearer Services specified in GSM 02.02 for a GSM PLMN.
|
101 631
|
Digital cellular telecommunications system (Phase 2+) (GSM); Technical performance objectives (GSM 03.05 version 8.0.0 Release 1999)
|
TR
|
8.0.0
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/101631/08.00.00_60/tr_101631v080000p.pdf
|
The present document contains technical performance objectives that should be met for the fixed infrastructure of GSM PLMNs. Concerning transmission delay for the PLMN in clause 4, the requirements should also be met by GSM Mobile Stations (MS)s. These performance design objectives are applicable to all implementations at all points in the growth cycle up to the maximum size. These reference loads and performance objectives may be used by manufacturers in designing GSM PLMNs and by Administrations or Recognised Private Operating Agencies (RPOA)s in evaluating a specific design or for comparing different designs for potential use in the Administration's or RPOA's intended implementation.
|
101 631
|
Digital cellular telecommunications system (Phase 2+) (GSM); Technical performance objectives (GSM 03.05 version 7.0.0 Release 1998)
|
TR
|
7.0.0
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/101631/07.00.00_60/tr_101631v070000p.pdf
|
The present document contains technical performance objectives that should be met for the fixed infrastructure of GSM PLMNs. Concerning transmission delay for the PLMN in clause 4, the requirements should also be met by GSM Mobile Stations (MS)s. These performance design objectives are applicable to all implementations at all points in the growth cycle up to the maximum size. These reference loads and performance objectives may be used by manufacturers in designing GSM PLMNs and by Administrations or Recognised Private Operating Agencies (RPOA)s in evaluating a specific design or for comparing different designs for potential use in the Administration's or RPOA's intended implementation.
|
101 631
|
Digital cellular telecommunications system (Phase 2+) (GSM); Technical performance objectives (GSM 03.05 version 6.0.0 Release 1997)
|
TR
|
6.0.0
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/101631/06.00.00_60/tr_101631v060000p.pdf
|
The present document contains technical performance objectives that should be met for the fixed infrastructure of GSM PLMNs. Concerning transmission delay for the PLMN in clause 4, the requirements should also be met by GSM Mobile Stations (MS)s. These performance design objectives are applicable to all implementations at all points in the growth cycle up to the maximum size. These reference loads and performance objectives may be used by manufacturers in designing GSM PLMNs and by Administrations or Recognised Private Operating Agencies (RPOA)s in evaluating a specific design or for comparing different designs for potential use in the Administration's or RPOA's intended implementation.
|
101 621
|
Network Aspects (NA); Number Portability Task Force (NPTF); Consequences of mobile number portability on the PSTN/ISDN and synergy between geographic and mobile number portability
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/101621/01.01.01_60/tr_101621v010101p.pdf
|
The scope of the present document is to describe the consequences of mobile number portability in GSM networks on PSTN/ISDN networks, and to describe how these consequences can be handled such that the PSTN/ISDN and GSM users can be provided with the same services as before the introduction of number portability. The present document also discusses possibilities for synergy between solutions employed in GSM networks for mobile number portability, and solutions employed in PSTN/ISDN networks for geographic number portability. The present document is limited to the aspects of geographic and/or mobile number portability that affect PSTN/ISDN networks. Aspects that concern GSM networks only are not dealt with. The scope of the present document is limited to the network aspects. Service management and inter-operator procedures are outside the scope of the present document. The present document only treats service provider portability. Service portability between telephone service (fixed) and mobile telephone service (PLMN) is excluded from consideration.
|
101 619
|
Network Aspects (NA); Considerations on networks mechanisme for charging and revenue accounting
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/101619/01.01.01_60/tr_101619v010101p.pdf
|
Whether the present document is applicable to a national environment and/or can be used for inter-network purposes, depends on regulatory demands and/or bilateral agreements. It should be noted that there are network requirements and signalling limitations that are not covered because they are outside the scope of the present document. Examples of these are as follows: a) capabilities that require for translation function of currencies or for the translation of currencies into metering pulses; b) with an analogue access with pulse metering no distinction can be made between pulses resulting from charges imposed by different operators; c) the on-line provided advice of charge information may not accurately reflect the correct charging rate due to discount rates, special charging arrangements, etc.; d) in association with these charging procedures also changes of the ISDN AOC supplementary services may be required for the identification of the network operator; e) new services like B-ISDN and new IN concepts are not fully considered in the present document; f) no interworking is covered with existing implementations making use of implicit information elements pointing to local available charging data; g) complaint handling between operators in case of incorrect advice of charge information; h) explicit encryption or special security mechanisms are outside the scope of the present document; i) which currency is used is outside the scope of the present document. Due to an increasing need for tools for flexible and efficient charging in a deregulated European telecommunications market with many telecommunication services available, it has been decided to study charging, billing and revenue accounting mechanisms in ETSI. The scope and background includes the reasons and intentions for the task. It should be stated that guidelines given in the present document by no means would be mandatory for ETSI members. These are common guidelines for solutions within the domain of the present document, and do not exclude alternatives. During the studies it has been decided that Billing is not relevant for this ETSI study. The billing process in this context is the task to organize the payment information for the user in a prepared billing layout and transfer this information to the user. Billing is regarded as an administrative procedure only, not fitted for ETSI recommendations and standardization. Nevertheless the activities providing the inputs for the billing process are included in the study. The present document considers general matters and gives an overview of the total domain of charging and revenue accounting. The present document aims to cover the aspects of the domain for all networks within ETSI's responsibility. The present document is intended to be the main document of a family dealing with charging and revenue accounting. It is important to state that the subjects of setting prices, tariffs, harmonization of tariffs or charging levels and administrative principles for revenue accounting between network operators/service providers (NO/SP), are outside the scope of the task. These matters are purely within the responsibility of the network operators and service providers and may be subject to national regulation.
|
101 618
|
Network Aspects (NA); Number Portability Task Force (NPTF); Working package 8; Location portability
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/101618/01.01.01_60/tr_101618v010101p.pdf
|
The present Working Package of the NPTF has the responsibility to study the issue of Location Portability utilizing to the greatest possible degree the work already done in the NPTF on Service Provider Portability. The different variants of Location Portability [1] should be investigated against a representative choice of scenarios for numbering scheme, charging structure, and regulation, e.g. to show the consequences for tariff and geographical information in the Directory Numbers. The combination of location portability together with Service Provider Portability should be considered. The present document should evaluate the need for further standardization.
|
101 617
|
Network Aspects (NA); Considerations on network mechanisms for charging and revenue accounting for European Telephony Numbering Space (ETNS) services
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/101617/01.01.01_60/tr_101617v010101p.pdf
|
The present document intends to describe a basic frame for charging and revenue accounting for ETNS Services. The main frame and the technical conditions for ETNS (European Telephony Numbering Space) Services are described from different points of view in the documents referred to in clause 2 References. The European Commission has initiated the issue of ETNS Services to be offered to the public by providers. ETNS calls are routed and transferred in the network operator's telecommunication network. The provision of ETNS Services, the translation of European Number (EN) to Routeing Number (RN) as well as the carrier connection through the public networks shall be managed by providers in competition. In general ETNS Services shall be accessible worldwide by all customers in public networks. It means, that either the network operator (NO) per default or some of the NOs, which can be accessed e.g. by access code, should provide routeing capabilities to the ETNS Services. The provisioning of the ETNS Registrar Database, the entity administrating the linking between the European Numbers and the Routeing Numbers, might be licensed to a service company. To call a European Service (an EN call), the Calling Party shall dial a European Number. The call will be transferred to a switch, which can enquire an ETNS Translation Database to translate this into a Routeing Number. The switch is then able to route the call to a switch, which can enquire an ETNS Service Provider Database in which the Routeing Number will be translated to a Terminating Number. The call can then be routed to the termination. In some cases the last translation can be omitted. The complete documentation for ETNS Services should include the issues: • Description by the responsible authorities of the ETNS service concept; • Management of the European Telephony Numbering Space [1]; • Number portability for ETNS Services [2]; • Routeing of calls to ETNS Services [3]; • Guidelines to the Administrator (ECTRA); • Descriptions of the relationship between commercial entities within the provision of ETNS Services; • Charging alternatives relating to (1) the ETNS services themselves and (2) to call related issues; • Technical requirements on charging; • Technical requirements on revenue accounting between the commercial entities providing elements to the ETNS service provision. Assumptions concerning ETNS Services: • Calling Parties in Europe (and outside) should as a minimum be offered routeing capabilities to ETNS Services by one of the accessible NOs. • Capabilities should be provided to allow the NOs to bar the ETNS service for a number of payment related reasons. • Acknowledge procedures for Calling Parties may exist for certain ETNS Services either somewhere in the network or outside the network at the gate to the service. • Number portability is automatically taken into account by the relationship EN/RN/TN. • The Calling Party is by default accessing his own NO. He might also be able to access alternative NOs by an appropriate access code. The accessed NO should be responsible for establishment of European Service calls, i.e. that NO is the Call Contractor. • The Call Contractor will by default be responsible for the charging. ETSI TR 101 617 V1.1.1 (1998-12) 6 • The Call Contractor might have possibilities to choose between alternative routeing of EN calls. • The ETNS Service is consisting of the service itself and the access traffic from the Calling Party to the service location including the supporting services for that traffic.
|
101 616
|
Network Aspects (NA); Intelligent Network (IN); Feasibility of standardization of aspects of Service Creation Environment (SCE) output to network elements via the Service Management Function (SMF)
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/101616/01.01.01_60/tr_101616v010101p.pdf
|
The present document analyses the service aspects and management aspects which are needed at the SCEF-SMF interface and identifies which of them would be feasibile to standardize in order to enable service creation for a multi-vendor environment. The scope of this feasibility study is to: a) identify and select requirements on the standardization of SCE interfaces (technical issues and commercial/business issues). Considering both functional architecture and business role models to clarify and prioritize the requirements; b) identify possible technical solutions; c) identify feasibility and acceptability of the possible technical solutions in the time frame of IN CS-3. The scope of the work includes the SCEF-SMF interfaces. The scope of the work does not include the SMF-FE interfaces. However, the logical relationship between SCEF and the Functional Entities (FEs) can impact the SCEF-SMF interface. The basic rationale for this work is to be able to create services using all involved (and possibly multivendor) IN Functional Entities - not only using the SCF, but extending also to other IN Functional entities, such as SDF, SRF or SSF. This work is actually carrying out recommendation 5 of the PAC EG2 report [3].
|
101 615
|
Network Aspects (NA); Services and networks architecture evolution for telecommunications
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/101615/01.01.01_60/tr_101615v010101p.pdf
|
The present document examines the relationship between the telecommunication services platform, the end user applications support platforms and the other platforms (as defined in the EII Enterprise Model [2]), and the GMM Architectural Framework [5]. The requirements of these are specified in architectural terms. The following aspects are included: - relationship with GII as defined by ITU-T JRG GII and ISO/IEC JTC1 SWP GII; - relationship with the EII as defined by EPIC; - relationship with IP-based networks; - relationship with UMTS and IMT-2000; - support for Applications; - service interworking; - U and V reference points; - information flows between platforms; - evolution of DASH principles and extension to applications in the context of network interconnection. This model should include current IN and TMN functions. The resulting architecture should be consistent with that proposed for the GII and should be within the context set up by regulators. The present document represents the current state of the work. It provides a framework within which further work can be undertaken on specific aspects of the architecture. This will be covered in other documents.
|
101 613
|
Intelligent Transport Systems (ITS); Cross Layer DCC Management Entity for operation in the ITS G5A and ITS G5B medium; Validation set-up and results
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/101613/01.01.01_60/tr_101613v010101p.pdf
|
The present document covers the overall validation of the cross layer DCC functionality of the ETSI ITS architecture. It considers the cross layer DCC specification developed in ETSI TS 103 175 [i.1] and the cross layer concept described in ETSI TR 101 612 [i.2] and all other relevant DCC components in the communication stack.
|
101 612
|
Intelligent Transport Systems (ITS); Cross Layer DCC Management Entity for operation in the ITS G5A and ITS G5B medium; Report on Cross layer DCC algorithms and performance evaluation
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/101612/01.01.01_60/tr_101612v010101p.pdf
|
The present document provides a preliminary technical overview of the cross-layer decentralized congestion control (DCC) architecture to be implemented in the ITS-S. It describes DCC functions and testable DCC limits and includes initial performance evaluation results based on simulations. In addition, reference scenarios and parameters used for performance evaluation purposes and the corresponding evaluation metrics are summarized. It will be completed by a Technical Report with validation set-up and results. Both will serve as a basis for the Technical Specification of the Cross Layer DCC control entity in the ITS G5A and ITS G5B media.
|
101 611
|
Intelligent Transport Systems (ITS); Testing; Conformance test specification for CALM Fast Services; FNTP/FSAP/IICP validation report
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/101611/01.01.01_60/tr_101611v010101p.pdf
|
The present document is the validation report of the FNTP, FSAP and IICP conformance tests and it provides statistics of executed and validated FNTP, FSAP and IICP conformance tests. The information provided has been produced by validation against two prototype implementations from industry. Furthermore, identified issues related to the base specifications ISO 29281-1 [i.5], ISO 24102-5 [i.4], ISO 24102-4 [i.3] and test specification TS 102 985-1 [i.6], TS 102 985-2 [i.7], TS 102 985-3 [i.8], TS 102 797-1 [i.9], TS 102 797-2 [i.10], TS 102 797-3 [i.11] are listed in the present document.
|
101 607
|
Intelligent Transport Systems (ITS); Cooperative ITS (C-ITS); Release 1
|
TR
|
1.2.1
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/101607/01.02.01_60/tr_101607v010201p.pdf
|
The present document identifies the documents that form Release 1 of Cooperative ITS (C-ITS).
|
101 599
|
Electromagnetic compatibility and Radio spectrum matters (ERM) System Reference Document (SRDoc); Broadband Direct-Air-to-Ground Communications System employing beamforming antennas, operating in the 2,4 GHz and 5,8 GHz bands
|
TR
|
1.1.3
|
http://www.etsi.org/deliver/etsi_tr/101500_101599/101599/01.01.03_60/tr_101599v010103p.pdf
|
The present document describes a system designed to provide broadband DA2G communications, which may require a change of the present frequency designation / utilisation within CEPT or some changes to the present regulatory framework for the proposed band(s) regarding either intended or unwanted emissions. The preferred regulatory approach would be for this system to operate on a non-interference and unprotected basis within the bands 2 400 MHz to 2 483,5 MHz and/or 5 855 MHz to 5 875 MHz. However, it is recognised that there is a high density and large variety of licence-exempt applications already deployed in the 2,4 GHz band in CEPT countries and a number of important applications (including ITS applications and BFWA) also are deployed or planned in, or adjacent to the 5,8 GHz band. The present document includes, in particular: • Market information. • Technical information. • Regulatory issues.
|
101 593
|
Satellite Earth Stations and Systems (SES); Global Navigation Satellite System (GNSS) based location systems; Minimum performance and features
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101500_101599/101593/01.01.01_60/tr_101593v010101p.pdf
|
The present document addresses location systems combining telecommunication networks with Global Navigation Satellite System (GNSS) and other navigation technologies in order to deliver location based services. The analysis contained in the present document is intended to highlight the growing use of complex location systems in order to deal with the expansion of location based applications in a mass market. The objective is thus to demonstrate both relevancy and achievability of standardising a high-level architecture for these systems, and the associated minimum performance. In order to achieve this objective, the present document first provides a reminder of the types of applications which rely on location information provided by such systems in order to provide services. Secondly, it describes these location systems, in terms of key functions to be fulfilled (also called key features) and available enabling technologies at system components level (navigation sensors, hybridization techniques). It also focuses on the definition of operation environments applicable to such systems (depending on the type of application). Finally, preliminary location systems architecture, interfaces and performances are defined. It is highlighted that the scope of this technical work specifically excludes standardisation of safety of life applications related to civil aviation, which are already addressed through, in particular, Radio Technical Commission for Aeronautics (RTCA) standards.
|
101 590
|
IMS Network Testing (INT); IMS/NGN Security Testing and Robustness Benchmark
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101500_101599/101590/01.01.01_60/tr_101590v010101p.pdf
|
The present document aims to introduce the basic principles and value of robustness testing, and highlight the importance of negative testing in a complex surroundings like IMS. It will introduce some guidelines for performing fuzz testing and provide a template for creating a test plan.
|
101 589
|
Broadband Radio Access Networks (BRAN); Very high capacity density BWA networks; Protocols
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101500_101599/101589/01.01.01_60/tr_101589v010101p.pdf
|
The present document describes the specific protocols for systems providing a throughput of 1 Gbit/s/km2. Such systems include features such as self-backhauling in both licensed and un-licensed bands, cognitive-radio based self-organization, etc.
|
101 584
|
<empty>
|
TR
|
2.1.1
|
http://www.etsi.org/deliver/etsi_tr/101500_101599/101584/02.01.01_60/tr_101584v020101p.pdf
|
The present document is motivated by the fact that within the ETSI M2M System semantic information needs to be available on M2M data that is transferred within the M2M system. Through such semantic information M2M data can be discovered by applications that do not have prior knowledge on them. The capability of the ETSI M2M System to enable applications to discover, interpret and use M2M data from different sources is considered essential for creating high-level M2M services and to develop open markets for M2M data. • In this study pre-normative work is conducted in order to facilitate normative specification work in ETSI M2M Rel.-2 or later. • The study analyses benefit, feasibility and potential requirements for the support of semantic information on application related M2M Resources in the M2M system. The ETSI M2M system would, however, only provide a means to create and handle such semantic information in the ETSI M2M system; ETSI M2M continues to stay independent of 'vertical' markets who in general would define the semantics of M2M data related to their field of expertise. • The study creates use cases that illustrate provisioning and usage of such semantic information and that demonstrate the benefit for the M2M ecosystem. • It investigates on the kind and amount of semantic information that would become available in the M2M system, keeping in mind a trade-off between complexity and usability. • It investigates discovery mechanisms for semantic information in the ETSI M2M System. This should take into account how existing solutions from other standards or research could be used within the ETSI M2M architecture. • It considers on issues of ownership/responsibility for application related M2M Resources in the case that the M2M system can provide semantic information on them. This needs to take into account the need for support of different levels of data privacy and confidentiality. This study relates to WI 0014 (TR 102 966 [i.11] - Interworking between the M2M Architecture and M2M Area Network technologies), as a further step in the abstraction of LAN technologies and devices. Existing relevant standards are taken into account and the study aspires to benefit from inputs of related research projects.
|
101 583
|
Methods for Testing and Specification (MTS); Security Testing; Basic Terminology
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101500_101599/101583/01.01.01_60/tr_101583v010101p.pdf
|
The present document defines terminology and an ontology which together provide the basis for a common understanding of security testing techniques which can be used in testing communication products and systems. The terminology and ontology have been derived from latest research, but also current standards and best practices specified by a broad range of standards organizations and industry bodies. The present document aims to provide information to practitioners on techniques used in testing, and assessment of security, robustness and resilience throughout the product and systems development lifecycle. The present document lists terms and methods for the following security testing approaches: • Verification of security functions and risk-based testing. • Load, stress and performance testing. • Resilience and robustness testing (fuzzing). • Penetration testing. Static Application Security Testing (SAST) tools and techniques are out of scope for the present document.
|
101 582
|
<empty>
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101500_101599/101582/01.01.01_60/tr_101582v010101p.pdf
|
The present document reports on the application of model-based security testing in different industrial domain. Relevant case studies and their results are described in terms of system under test, applied tool chain, together with an overview of the technical requirements. The case studies were conducted as part of ITEA2 DIAMONDS project (http://www.itea2-diamonds.org/index.html) and SPaCIoS project (http://www.spacios.eu/). The document concentrates on the results and conclusions from this work, giving an insight into how applicable such methods are today for testing and indicating the current strengths and weaknesses.
|
101 550
|
Documents relevant to EN 301 549 (V1.1.1) "Accessibility requirements suitable for public procurement of ICT products and services in Europe"
|
TR
|
1.1.3
|
http://www.etsi.org/deliver/etsi_tr/101500_101599/101550/01.01.03_60/tr_101550v010103p.pdf
|
The present document lists the documents used in the creation of EN 301 549 (V1.1.1) [i.3] on accessibility requirements for public procurement of ICT products and services in Europe and provides a source reference for any other documents needed to implement the test procedures specified in that document. As well as identifying the sources for the EN content, the present document also provides additional explanation to assist users of the EN with clarifications and supporting information about measurement methods, particularly where no globally agreed test presently exists. Where there are any test gaps, these are identified and test descriptions and evaluation methodologies are developed. In those exceptional cases where it is not possible to do so, recommendations are given on how the gaps should be filled. The present document does not address additional sources or issues raised during the creation of later versions of the EN.
|
101 577
|
<empty>
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101500_101599/101577/01.01.01_60/tr_101577v010101p.pdf
|
The present document describes terminology and concepts of performance tests with a generalized view of performance characteristics as the starting point. What kind of characteristics are indicators of a product's performance and what kind of measurement data is captured and processed to provide relevant figures on requested performance is in this view the kernel of performance testing. Methods for performance testing will consequently be guided by the requirements on expected output. A set of following documents will describe strategies, methodologies and techniques of performance testing.
|
101 576
|
<empty>
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101500_101599/101576/01.01.01_60/tr_101576v010101p.pdf
|
The present document describes the Recommendations for the applicability of environmental classes in outdoor cabinet environment. The present document applies for the powering of all equipment of the access network (copper, fibre or radio networks) located outside telecommunications centres. The present document is intended to be applicable to empty cabinets which can be equipped for installation in an outdoor location. The recommendations for outdoor equipment also apply, where relevant, to empty outdoor enclosures supplied for housing Information technology equipment to be installed in an outdoor location. The recommendations for humidity, vibration, shock, biologic conditions, chemical active substances and mechanically active substances (sand, dust, etc.) and mechanical conditions including earthquake contained within relevant standards of intended use according to EN 300 019 series [i.2] to [i.7].
|
101 569
|
<empty>
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101500_101599/101569/01.01.01_60/tr_101569v010101p.pdf
|
The present document assesses the current status of Cable Equipment standards that are implemented and deployed in the components that comprise integrated broadband cable and television networks and the approaches for their transition to IPv6. Since the time-to-market is a factor considering the depletion of IPv4 addresses, the present document accommodates an urgent need in the industry and provides the fundamental analysis for further standardization work. The present document assesses the IPv6 transition technologies to support basic customer services, voice and data.
|
101 568
|
Human Factors (HF); A study of user context dependent multilingual communications for interactive applications
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101500_101599/101568/01.01.01_60/tr_101568v010101p.pdf
|
The present document gives an introduction to and an analysis of the most important issues and areas of relevance to context dependent multilingual communications for interactive applications. It provides a clear description of the most common difficulties and problems faced by application designers and localisers today, and how they solve or work around these. The scope of the present document is summarised through the following statements about the study: 1) It defines localisation and explains what is involved in the localisation process of interactive application, including the management of interactive and non-interactive applications translations. 2) It describes in detail problems and issues related to the localisation of interactive applications, to help understand the limitations, needs and existing solutions or work-around used in the field. 3) It identifies the different industrial and technical domains that are directly concerned by the issue. It looks at several innovation activities related to the domain and provides a state-of-art presentation of languages technologies and research in the domain of multilingual applications, translation management and localisation. 4) It collects information from the different industry sectors identified, examining their needs, their localisation process, their management of translations, and potentially, specific tools or processes they are using for solving or working around the problem. 5) It provides a generic analysis of the situation, plus a specific analysis related to each identified industry sector. The present document addresses the localisation process, which covers a large spectrum of issues and activities. However, the study, after providing an exhaustive description of what localisation means, will focus on the localisation aspects relevant to the highly interactive applications heavily using context variables. The present document had an initial focus on the game industry but it does not restrict its scope to video games. On the contrary, it will expand its vision beyond games, aiming at identifying all other technical and economical sectors facing similar issues. LOCALISATION COMPLEXITY LOCALISATION SENSITIVE INDUSTRY SCOPE Social and Cultural Context Variables and high interaction Grammar correctness Basics Figure 1: Technical Report Scope diagram Finally, the present document will not provide an exhaustive analysis of advanced research projects and techniques, but it will review the main existing or known areas of innovation and analyse whether they may help solving our problem. ETSI ETSI TR 101 568 V1.1.1 (2012-02) 8
|
101 567
|
Lawful Interception (LI); Cloud/Virtual Services for Lawful Interception (LI) and Retained Data (RD)
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101500_101599/101567/01.01.01_60/tr_101567v010101p.pdf
|
The present document provides an overview of Cloud/virtual services and studies. This includes Lawful Interception (LI) and Retained Data (RD) aspects of these services in the converged Cloud/virtual service environment, the challenges and obstacles of complying with those obligations, what implementations can be achieved under existing ETSI LI standards and what new work may be required to achieve needed Lawful Interception capabilities. Cloud Services, in whichever forms they take (Infrastructure, Software, Platform or combinations of these), are often trans-border in nature and the information required to maintain LI and RD capability or sufficient coverage for LI/RD support may vary in different countries or within platforms of different security assurance levels. The present document aims to ensure capabilities can be maintained while allowing business to utilize the advantages and innovations of Cloud Services and was undertaken cooperatively with relevant Cloud security technical bodies.
|
101 565
|
Speech and multimedia Transmission Quality (STQ); Guidelines and results of video quality analysis in the context of Benchmark and Plugtests for multiplay services
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101500_101599/101565/01.01.01_60/tr_101565v010101p.pdf
|
The present document presents the results obtained on technological platform where Triple Play offers are available. These results concern the quality evaluation of IPTV video streams produce by the offers available on the platform. The determinate indicators are presented in the main part of the document. The results were obtained during a specific test campaign for SD streams analysis. Note that determinate indicators are presented in ES 202 765-4 [i.1]. So the present document represents an implementation report for some metrics and associated methods defined in ES 202 765-4 [i.1]. The main part of the present document presents the performed indicators and charts used for results presentation. Annex A presents the methodology implemented in a first series of tests and the results.
|
101 562-3
|
<empty>
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101500_101599/10156203/01.01.01_60/tr_10156203v010101p.pdf
|
MIMO PLT Channel and noise is reviewed and statistical analysis performed, which takes into account earthing variations, country variation, operator differences, phasing and distribution topologies, domestic, industrial and residential types, as well as local network loading.
|
101 562-2
|
<empty>
|
TR
|
1.3.1
|
http://www.etsi.org/deliver/etsi_tr/101500_101599/10156202/01.03.01_60/tr_10156202v010301p.pdf
|
MIMO PLT EMI is a review and statistical analysis which takes into account such matters as earthing variation, country variation, operator differences, phasing and distribution topologies, domestic, industrial and housing types along with local network loading.
|
101 562-1
|
<empty>
|
TR
|
1.3.1
|
http://www.etsi.org/deliver/etsi_tr/101500_101599/10156201/01.03.01_60/tr_10156201v010301p.pdf
|
Convential PLT modems (SISO) use only the phase and neutral wire of the mains grid. MIMO PLT utilizes additionally the protective earth wire. The present document is an overview of the prevalence of the third wire in private homes and a description of the measurement setup and equipment used to perform EMI, channel and noise measurements.
|
101 561
|
IMS Network Testing (INT); Enhancement of Automated Interoperability Testing Framework in IMS core networks: Test adapter And codec design suited for TTCN-3 interoperability testing
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101500_101599/101561/01.01.01_60/tr_101561v010101p.pdf
|
The purpose of the present document is to present and describe issues and design choices made while developing a generic test adapter and codec suited for TTCN-3 interoperability testing within both STF370 and STF407. For further information, the reader is referred to EG 202 810 [i.3] for global view of methodology and framework for automated interoperability testing and TR 102 788 [i.4] for an overall view of the IMS interoperability test architecture which has served as the main source for design requirements. The present document has been written with the assumption that the reader is well versed in C++ and TTCN-3 (ES 201 873-1 [i.2]) programming. Also good knowledge of the operation of ES 201 873-5 [i.7] and ES 201 873-6 [i.6] standards is assumed.
|
101 560
|
IMS Network Testing (INT); IMS NNI Interworking Test Scripts for RCS Release 2.0
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101500_101599/101560/01.01.01_60/tr_101560v010101p.pdf
|
The present document describes the Abstract Test Suite (ATS) to test interoperability at IMS NNI for IP multimedia call control protocol based on TS 124 229 [i.1] including Rich Communication Suite (RCS) release 2.0. The ATS has been specified on the basis of the Test Descriptions for IMS NNI interoperability testing for RCS presented in TS 102 901 [i.2] and extents TS 186 011-3 [i.3]. It defines a TTCN-3 framework as well as codec and adapter requirements for analysing interoperability test execution traces generated from the manual or automatic execution of IMS interoperability tests. The scope of this ATS is not to cover all requirements specified in TS 124 229 [i.1]. It only assesses requirements that are observable at the NNI between two IMS core network implementations specified in TS 102 901 [i.2].
|
101 557
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); System Reference document (SRdoc); Medical Body Area Network Systems (MBANSs) in the 1 785 MHz to 2 500 MHz range
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101500_101599/101557/01.01.01_60/tr_101557v010101p.pdf
|
The present document describes Medical Body Area Network Systems (MBANSs), which will require a change of the present frequency designation within CEPT. The types of devices that can belong to MBANSs are on-body and off-body medical sensors, patient monitoring devices and medical actuators covered by the Medical Device Directive (Directive 93/42/EEC [i.30]). Implantable devices do not fall within the scope of MBANSs. The present document includes in particular: • Market information. • Technical information including expected sharing and compatibility issues. • Regulatory issues.
|
101 552
|
Guidance for the application of conformity assessment to accessibility requirements for public procurement of ICT products and services in Europe
|
TR
|
1.0.0
|
http://www.etsi.org/deliver/etsi_tr/101500_101599/101552/01.00.00_60/tr_101552v010000p.pdf
| |
101 551
|
Guidelines on the use of accessibility award criteria suitable for public procurement of ICT products and services in Europe
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101500_101599/101551/01.01.01_60/tr_101551v010101p.pdf
|
........................................................................................................................................................ 5
|
101 578
|
Speech and multimedia Transmission Quality (STQ); QoS aspects of TCP-based video services like YouTubeTM
|
TR
|
1.3.1
|
http://www.etsi.org/deliver/etsi_tr/101500_101599/101578/01.03.01_60/tr_101578v010301p.pdf
|
The present document focuses on Quality of Service (QoS) measurements for IP-based video services with reliable transport where downloading and viewing takes place in parallel. In principle the presented measurement approach can be used for all video services, where the video is embedded in a HTML context as of video on demand services like e.g. YouTube™. Similar applications are also available on social networks. In the following, QoS parameters to be used for such video service measurements are presented. The underlying procedure consists of two phases: first requesting a control script containing among other information a link to the content, and second, requesting this content. In the present document, YouTube™ serves as the default example but the described QoS parameters can easily be applied to other IP-based video services based on reliable transport. Furthermore, the present document also offers practical guidance for measurement execution and evaluation of HTTP/HTTPS streaming QoS measurement. The present document covers the video request and playout of the video. Other services offered by content providers such as e.g. uploading video or managing the private account are not covered.
|
101 546
|
<empty>
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101500_101599/101546/01.01.01_60/tr_101546v010101p.pdf
|
The present document is intended to provide an introduction to the Converged Cable Access Platform (CCAP) architecture. The CCAP architecture has been specified in an integrated and a modular implementation. The present document describes both the integrated and modular architectures and discusses the various specifications that contain normative requirements pertaining to the CCAP. In addition, the present document describes the architectural entities and interfaces that make up the integrated and modular implementations, as well as the protocols they support. For the modular implementation, the present document provides an overview of the operation of Packet Shelf and Access Shelf devices, as well as the interface between them.
|
101 545-5
|
Digital Video Broadcasting (DVB); Second Generation DVB Interactive Satellite System (DVB-RCS2); Part 5: Guidelines for the Implementation and Use of TS 101 545-3
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101500_101599/10154505/01.01.01_60/tr_10154505v010101p.pdf
|
The present document provides implementation and usage guidelines for higher-layer functions in DVB-RCS2 interactive satellite networks, which is defined in [i.2]. The lower-layer specification and implementation guidelines for DVB-RCS2 networks are presented in [i.3] and [i.4], respectively. The present document covers on transparent star, regenerative mesh, and transparent mesh overlay network topologies. The recommendations and examples provided in the present document are informative.
|
101 545-4
|
Digital Video Broadcasting (DVB); Second Generation DVB Interactive Satellite System (DVB-RCS2); Part 4: Guidelines for Implementation and Use of EN 301 545-2
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101500_101599/10154504/01.01.01_60/tr_10154504v010101p.pdf
|
The present document provides implementation guidelines for equipment and systems intended to comply with [i.1]. It also provides designs that may be used to supplement the normative specifications provided in [i.1]. Such designs could evolve into being a part of the normative specifications in the future.
|
101 543
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); RFID evaluation tests undertaken in support of M/436 Phase 1
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101500_101599/101543/01.01.01_60/tr_101543v010101p.pdf
|
The present document describes some RFID Evaluation Tests that were carried to evaluate the characteristics and performance of RFID equipment operating at their three principal frequencies of use. The information derived from the tests is directly relevant to the work of STF 396 in preparing their response to EC Mandate M/436 [i.1].
|
101 542
|
Satellite Earth Stations and Systems (SES); Comparison of candidate radio interfaces performances in MSS context
|
TR
|
1.2.1
|
http://www.etsi.org/deliver/etsi_tr/101500_101599/101542/01.02.01_60/tr_101542v010201p.pdf
|
The present document aims to compare the link level performances of several radio interfaces (HSPA, LTE and mobile WiMAX) in geostationary based mobile satellite systems operating in S band or L band. The present document provides a high level description of the radio interfaces to be compared. It then identifies their key characteristics and defines the propagation channel used for the comparison. Link level performances are compared in terms of required signal to noise ratio ( o b N E ) for a given block error rate (BLER) and data rate. The present document concludes on the respective qualitative benefits and drawbacks of the considered radio interfaces.
|
101 540
|
<empty>
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101500_101599/101540/01.01.01_60/tr_101540v010101p.pdf
|
The present document describes the DVB-H Small Gap Fillers intended for consumer use. These devices are low-power on-channel repeaters of a DVB-H multiplex, with the aim of improving indoor reception in areas where outdoor reception is available. It includes in particular: • Market information. • Technical information. • Regulatory issues.
|
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.