id
stringlengths 7
13
| title
stringlengths 7
396
| type
stringclasses 2
values | version
stringclasses 245
values | url
stringlengths 90
98
| scope
stringlengths 0
83.8k
|
|---|---|---|---|---|---|
102 529
|
Speech and Multimedia Transmission Quality (STQ); SMS Testing Guidelines; Measurement Methodologies and Quality Aspects
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102500_102599/102529/01.01.01_60/tr_102529v010101p.pdf
|
The goal of the present document is to point out all the aspects impacting SMS service measurement results, providing many different approaches for SMS testing.
|
102 526
|
Speech Processing, Transmission and Quality Aspects (STQ); Wideband telephony considerations
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102500_102599/102526/01.01.01_60/tr_102526v010101p.pdf
|
The present document describes the state of the art of the research, tools and standards which are relevant for specifying, assessing and predicting wideband speech quality. The present document gives a summary of: - Existing methods and specifications applicable for wideband telephony. - The state of the art subjective testing procedures for wideband applications. - The ongoing work relevant to define and assess the wideband terminal (and network) characteristics. - The ongoing work on objective models for wideband speech quality assessment and prediction. The present document furthermore gives an overview about the work needed to create a wideband transmission rating model. Independent of speech coder used. The present document focuses on wideband telephony (100 Hz to 8 kHz) but is not limited to this frequency range.
|
102 525
|
Satellite Earth Stations and Systems (SES); Satellite Digital Radio (SDR) service; Functionalities, architecture and technologies
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102500_102599/102525/01.01.01_60/tr_102525v010101p.pdf
|
The present document concerns the functionalities, reference architecture and technologies for Satellite Digital Radio (SDR) systems. In particular, the radio interface of SDR broadcast receivers is addressed. It provides a summary of technologies that can be used to address the functionalities in a manner compatible with the reference architecture. The various technologies have been submitted during an internal call for proposals of the ETSI TC SES/SDR working group. Within the scope of the present document, the various technology choices and interfaces/layers are not intended to be completely definitive, and other choices might be considered. It should also be noted that various architectures described in the present document are not intended to be interoperable with each other. The material in the present document should be useful for the creation of an SDR radio interface standard or standards for particular parts of the SDR system.
|
102 522
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Equipment for Detecting Movement; Radio equipment operating in the frequency range 17,1 GHz to 17,3 GHz; System Reference Document for Ground Based Synthetic Aperture Radar (GBSAR)
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102500_102599/102522/01.01.01_60/tr_102522v010101p.pdf
|
The present document provides information on the intended applications; the technical parameters and the radio spectrum requirements for GBSAR based Stepped Frequency CW (SF-CW) radar, operating in the frequency band: • 17,1 GHz to 17,3 GHz. The present document describes a GBSAR system that is used for detection of movement. The scope is limited to radar equipment operated as a short range device. The radar applications in the present document are not intended for communications purposes but exclusively for detection of movement related to safety of structures potentially effecting the protection of workers and the general public. A few examples of applications are given below but are limited to: • static and dynamic load analyses of constructions like bridges and buildings; • landslide monitoring; • volcano and earthquake movement detection; • urban area subsidence detection. Additional information on GBSAR is given in the following clauses: • Annex A: Detailed market information; • Annex B: Technical information; • Annex C: Expected compatibility issues.
|
102 521
|
Speech Processing, Transmission and Quality aspects (STQ); Support to TC EMTEL for QoS and Transmission Quality aspects for end-to-end services
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102500_102599/102521/01.01.01_60/tr_102521v010101p.pdf
|
The present document provides basic information on the planning and provision of end-to-end services with respect to transmission quality. Network management, signalling and traffic engineering aspects are out of the scope of the present document. The purpose of the present document is to describe the basic approach in order to identify QoS requirements and objectives for end-to-end services and to list critical technical aspects that have an influence on the resulting service quality. Also references to appropriate existing standards are given. Based on this information technical requirements and thresholds for the telecommunications network infrastructure and terminal equipment needed in order to support the desired end-to-end services can be derived. The present document takes into account traditional circuit switched as well as packet switched technology.
|
102 520
|
Human Factors (HF); Access symbols for use with video content and ICT devices; Development and evaluation
|
TR
|
1.1.2
|
http://www.etsi.org/deliver/etsi_tr/102500_102599/102520/01.01.02_60/tr_102520v010102p.pdf
|
The present document reports the background research, symbols development and evaluation undertaken to create a European Standard (ETSI ES 202 432) [4] on symbols to identify the availability of access services applicable to a range of ICT devices. The access services to be identified were: • Subtitling. • Audio description. • Signing. • Speech output. • Spoken command. The symbols defined in the final standard will be applicable to all access services, ICT devices and associated media that provide the defined facilities.
|
102 519
|
Lawful Interception (LI); Lawful Interception of public Wireless LAN Internet Access
|
TR
|
1.2.1
|
http://www.etsi.org/deliver/etsi_tr/102500_102599/102519/01.02.01_60/tr_102519v010201p.pdf
|
The present document provides an overview of the issues and challenges regarding the Lawful Interception of Public Internet Access by means of Wireless LAN technology as defined in the IEEE 802.11 [i.2] specification and possible approaches for dealing with these issues, considering different architectures and business models. The present document is applicable to public Internet access. The private use of Wireless LAN technology is excluded.
|
102 513
|
Terrestrial Trunked Radio (TETRA); Feasibility Study into the Implications of Operating Public Safety Sector (PSS) TEDS using the proposed "Tuning Range" concept in the 410 MHz to 430 MHz and 450 MHz to 470 MHz frequency bands
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102500_102599/102513/01.01.01_60/tr_102513v010101p.pdf
|
The present document considers possible implications covering the following areas: • Frequency Spectrum Considerations. • Implications on use of wideband terminals covering 380 MHz to 470 MHz. • Radio terminal antenna implications. • Base station antenna implications. • Implications of transmitter combining and receiver splitting systems at TETRA base station sites. • Security implications of Public Safety sharing frequency bands used by non-public safety users. • TEDS channel bandwidth assignment implications. • Spectrum efficiency implications of TETRA V+D and TEDS in the same band versus TETRA V+D and TEDS in separate bands. • Propagation and coverage implications of the control channels and TEDS channels being in different frequency bands. • Implications of Two Antenna System Working at Base Station Sites. • Alternative Solutions.
|
102 512
|
Terrestrial Trunked Radio (TETRA); Security; Security requirements analysis for modulation enhancements to TETRA
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102500_102599/102512/01.01.01_60/tr_102512v010101p.pdf
|
The present document updates the threat analysis presented in ETR 086-3 [1] with respect to new services and capabilities offered by the enhancements to TETRA that aim to provide alternative modulation schemes with a view to offering higher data transmission rates. NOTE: The analysis provided by ETR 086-3 [1] remains valid and the recommendations made by that document remain in force. In clause 7 the analysis identifies security extensions required for EN 300 392-7 [3].
|
102 506
|
Speech and multimedia Transmission Quality (STQ); Estimating Speech Quality per Call
|
TR
|
1.4.1
|
http://www.etsi.org/deliver/etsi_tr/102500_102599/102506/01.04.01_60/tr_102506v010401p.pdf
|
The present document proposes a way to model measurement results on a per sample basis that allow to estimate the perceived end-to-end speech quality per call for narrowband circuit switched voice services in mobile networks. It focuses on speech (listening) quality of a voice call. Speech quality per call calculation determines the speech quality separate per each direction of the call. Conversational properties such as talker quality, round trip and other related metrics are not considered. Speech Quality of video telephony is not considered either. The scenario is focussing on test signals between 60 seconds and 120 seconds in duration with alternating speech/silence periods as described in clause 5. The presented model is based on three studies but may not generalize to other call scenarios than those used in the underlying studies. Throughout the present document where ITU-T Recommendation P.862.1 [i.2] (or ITU-T Recommendation P.862 [i.1]) is quoted the same applies to all measurements of listening quality. This can be listening quality scores gained by auditory tests (MOS-LQS) or objective measurements predicting MOS-LQO according to ITU-T Recommendation P.800.1 [i.3] covering the relevant network distortions and speech processing components in their scope.
|
102 505
|
<empty>
|
TR
|
1.3.1
|
http://www.etsi.org/deliver/etsi_tr/102500_102599/102505/01.03.01_60/tr_102505v010301p.pdf
|
The present document describes the way used by a task force within the STQ Mobile working group to create and validate the Copernicus and subsequently the Kepler and Kepler Smartphone reference web pages to be used for QoS testing of http services. This included acquisition of basic information on parameters of typical "real-world" web pages. Whereas parts of the present document may appear to the reader as being a general guide, the present document should be understood primarily as a report on what was done. It should be clearly mentioned that the issue at hand is not "exact science". We want to design a reference page having properties of a "typical" web page. However, such typical web pages follow trends, given by available design tools, design paradigms, and fashions. The limits in which web designers operate are also given by transport channel capabilities such as higher bandwidth or device capabilities to render multimedia content. Given these facts, we should be aware that any concrete reference web page will need adjustment and reconsideration from time to time. QoS testing is about ranking. Given two systems under test having similar performance, choice of any particular reference web site may well determine ranking order, and open up room for discussions by people who do not like the results. Since this works in all directions, the conclusion suggested by the authors of the present document is to keep the qualitative nature of the subject well in mind and to refrain from taking the "winner/loser" aspect of benchmarking too serious.
|
102 503
|
Lawful Interception (LI); ASN.1 Object Identifiers in Lawful Interception and Retained data handling Specifications
|
TR
|
1.18.1
|
http://www.etsi.org/deliver/etsi_tr/102500_102599/102503/01.18.01_60/tr_102503v011801p.pdf
|
The present document gives an overview over the relevant Object IDentifiers (OIDs) used in Lawful Interception and Retained data handling specifications of ETSI and other specifications from ITU-T and ISO.
|
102 496
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); System Reference Document; Short Range Devices (SRD); Technical characteristics for Location tracking Applications for Emergency Services (LAES) in disaster situations operating within the frequency range from 3,4 GHz to 4,8 GHz
|
TR
|
2.1.1
|
http://www.etsi.org/deliver/etsi_tr/102400_102499/102496/02.01.01_60/tr_102496v020101p.pdf
|
The present document defines the requirements for radio frequency usage for short range Ultra Wide Band (UWB) location tracking devices to be used only by emergency services (e.g. fire workers, police, civil protection authorities) in critical situations or in surveillance operations and operating within the frequency range from 3,4 GHz to 4,8 GHz. A licensing approach is suggested for these applications. Additional information is given in the following annexes: • detailed market information (annex A); • technical information (annex B); • expected compatibility issues (annex C).
|
102 496
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Technical characteristics for indoor Location Application for Emergency Services (LAES) in disaster situations operating within the frequency range from 3 GHz to 5 GHz; System Reference Document
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102400_102499/102496/01.01.01_60/tr_102496v010101p.pdf
|
The present document defines the requirements for radio frequency usage for short range Ultra Wide Band (UWB) location tracking devices to be used only by emergency services (e.g. fire workers, police, civil protection authorities) in critical situations or in surveillance operations and operating within the frequency range from 3,4 GHz to 4,8 GHz. A licensing approach is suggested for these applications. Additional information is given in the following annexes: • detailed market information (annex A); • technical information (annex B); • expected compatibility issues (annex C).
|
102 495-7
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); System Reference Document; Short Range Devices (SRD); Technical characteristics for SRD equipment using Ultra Wide Band Sensor technology (UWB); Part 7: Location tracking and sensor applications for automotive and transportation environments operating in the frequency bands from 3,1 GHz to 4,8 GHz and 6 GHz to 8,5 GHz
|
TR
|
1.2.1
|
http://www.etsi.org/deliver/etsi_tr/102400_102499/10249507/01.02.01_60/tr_10249507v010201p.pdf
|
The present document covers a system description and the corresponding spectrum requirements for devices using UWB radio technology operating in the frequency range from 3,1 GHz to 4,8 GHz and from 6 GHz to 8,5 GHz which are in automotive or public transportation environments (e.g. installed in road and rail vehicles). The operating radio link distance is limited typically to a maximum of about 30 meters, whereby some application scenarios show challenging operating conditions which impose the requirements stated in the present document. Some applications described in the present document will enhance the safety of the passengers, but these applications are not safety critical. UWB based applications under the scope of the present document typically rely on small, cost and energy effective, lightweight tags/sensors which are attached inside or outside the vehicle, to objects or parts of the vehicle to be monitored, or are explicitly carried by passengers. They may also form an integral part of portable electronic equipment carried by passengers (such as future generation mobile phones equipped with an additional UWB air interface). They are connected to one or more "reference stations", also in the scope of the present document, placed inside the vehicle, which collect the data and communicate, when needed, via a UWB signal to the tags/sensors. The present document includes necessary information to support the co-operation between ETSI and the Electronic Communications Committee (ECC) of the European Conference of Post and Telecommunications Administrations (CEPT), including: • Detailed market information (annex A). • Technical information (annex B). • Expected compatibility issues (annex C).
|
102 495-5
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); System Reference Document; Short Range Devices (SRD); Technical characteristics for SRD equipment using Ultra Wide Band Sensor technology (UWB); Part 5: Location tracking applications type 2 operating in the frequency bands from 3,4 GHz to 4,8 GHz and from 6 GHz to 8,5 GHz for person and object tracking and industrial applications
|
TR
|
1.2.1
|
http://www.etsi.org/deliver/etsi_tr/102400_102499/10249505/01.02.01_60/tr_10249505v010201p.pdf
|
The present document defines the requirements for radio frequency usage for Ultra Wide Band (UWB) location tracking devices type 2. These devices would operate in the frequency ranges from 3,4 GHz to 4,8 GHz and from 6 GHz to 8,5 GHz. Operation is foreseen for indoor and outdoor applications in the range 3,4 GHz to 4,8 GHz and only indoor applications in the range 6 GHz to 8,5 GHz as for the earlier type (i.e. type 1) covered in TR 102 495-3 [i.9]. The operating distance may be limited to about 200 metres. It would include applications from all different markets (see list of markets in introduction). Site-specific licensing of fixed outdoor tracking systems using higher emission levels is possible and proposed by the present document. The present document covers ultra-wideband location tracking tags which are attached to people or objects. The tags are tracked using a base station infrastructure. Equipment covered by the present document is fitted with an integral or dedicated antenna. Additional information is given in the following annexes: • Detailed market information (annex A). • Technical information (annex B). • Expected compatibility issues (annex C).
|
102 495-3
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); System Reference Document; Short Range Devices (SRD); Technical Characteristics for SRD equipment using Ultra-Wideband Sensor Technology (UWB); Part 3: Location tracking applications type 1 operating in the frequency band from 6 GHz to 8,5 GHz for indoor, portable and mobile outdoor applications
|
TR
|
1.3.1
|
http://www.etsi.org/deliver/etsi_tr/102400_102499/10249503/01.03.01_60/tr_10249503v010301p.pdf
|
The present document defines the requirements for radio frequency usage for Ultra Wide Band (UWB) location tracking devices type 1. These devices are operating in the frequency range from 6 GHz to 8,5 GHz. Operation is foreseen for indoor, portable and mobile outdoor applications and the operating distance is limited to a maximum of about 100 metres. It will include applications from all different markets (see list of markets in introduction). The type 1 equipment complies with the conditions of the amended generic ECC decision [5]. Type 2 is covered in part 5 of TR 102 495 [9] and corresponds to a future generation of the equipment. The present document covers ultra-wideband location tracking tags which are attached to people or objects and tags are tracked using a fixed receiver infrastructure to only receive the UWB emission emitted by the tags. Equipment covered by the present document is fitted with an integral or dedicated antenna. The present document includes necessary information to support the co-operation between ETSI and the Electronic Communications Committee (ECC) of the European Conference of Post and Telecommunications Administrations (CEPT), including: • Detailed market information (annex A). • Technical information (annex B). • Expected compatibility issues (annex C).
|
102 495-2
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Technical characteristics for SRD equipment using Ultra Wide Band Sensor technology (UWB); System Reference Document; Part 2: Object Discrimination and Characterization (ODC) applications for power tool devices operating in the frequency band of 2,2 GHz to 8,5 GHz
|
TR
|
1.2.1
|
http://www.etsi.org/deliver/etsi_tr/102400_102499/10249502/01.02.01_60/tr_10249502v010201p.pdf
|
The present document provides information on the intended applications, the technical parameters and the radio spectrum requirements for UWB object classification sensor equipment operating in the frequency band from 2,2 GHz to 8,5 GHz. The applications which operate in close proximities can be divided in two different categories: Category 1: Proximity Sensing of Human tissue • Sensing and position detection of human tissue (extremities) for user-protection applications, e.g. for tooling equipment (table top saw); Category 2: Pre-impact protection (direct contact avoidance for building work) • Measure the thickness of materials and penetrate materials for "Break through" protection and avoid direct contact for building, construction type work (e.g. drilling machine); pre-impact detection. The present document includes necessary information including: • Detailed market information (annex A). • Technical information (annex B). • Expected compatibility issues (annex C). The present document does not cover communication, through-wall, building material analysis and classification and ground probing radar devices.
|
102 495-1
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Technical characteristics for SRD equipment using Ultra Wide Band Sensor technology (UWB); System Reference Document Part 1: Building material analysis and classification applications operating in the frequency band from 2,2 GHz to 8 GHz
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102400_102499/10249501/01.01.01_60/tr_10249501v010101p.pdf
|
The present document provides information on the intended applications, the technical parameters and the radio spectrum requirements for UWB material analysis and classification devices operating in the frequency band from 2,2 GHz to 8 GHz. It describes handheld systems that are manually operated to scan a building structure for hidden objects and to analyze building material properties. In addition, the equipment design only supports activation when in direct contact to the structure or material being investigated. It includes necessary information to support the co-operation between ETSI and the Electronic Communications Committee (ECC) of the European Conference of Post and Telecommunications Administrations (CEPT), including: • Detailed market information (annex A); • Technical information (annex B); • Expected compatibility issues (annex C). The present document does not cover through-wall and ground probing radar devices.
|
102 494
|
Powerline Telecommunications (PLT) Technical requirements for In-House PLC modems
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102400_102499/102494/01.01.01_60/tr_102494v010101p.pdf
|
The present document includes Technical requirements of In Home PLT modems, PHY and MAC. For instance, data rate(s), BER, repeating functionality, latency, jitter, encryption, synchronization, etc. requirements will be defined. Modems build for In home LAN applications within private networks shall support this requirements. The present document does not specify Consumer Premises Equipment of access use.
|
102 493
|
Speech and multimedia Transmission Quality (STQ); Guidelines for the use of Video Quality Algorithms for Mobile Applications
|
TR
|
1.3.1
|
http://www.etsi.org/deliver/etsi_tr/102400_102499/102493/01.03.01_60/tr_102493v010301p.pdf
|
The present document gives guidelines for the use of video quality algorithms for the different services and scenarios applied in the mobile environment.
|
102 492-2
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Intelligent Transport Systems (ITS); Part 2: Technical characteristics for pan European harmonized communications equipment operating in the 5 GHz frequency range intended for road safety and traffic management, and for non-safety related ITS applications; System Reference Document
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102400_102499/10249202/01.01.01_60/tr_10249202v010101p.pdf
|
The present document describes the spectrum usage requirements for equipment related to: • primarily roadside/infrastructure to vehicle communications (RVC); • inter-vehicle communications (IVC). It includes necessary information to support the co-operation between ETSI and the Electronic Communications Committee (ECC) of the European Conference of Post and Telecommunications Administrations (CEPT), including: • Market information in annex A. • Technical information in annex B. • Expected compatibility issues in annex C.
|
102 492-1
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Intelligent Transport Systems (ITS); Part 1: Technical characteristics for pan-European harmonized communications equipment operating in the 5 GHz frequency range and intended for critical road-safety applications; System Reference Document
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102400_102499/10249201/01.01.01_60/tr_10249201v010101p.pdf
|
The present document describes traffic telematics applications with the primary intention of reducing the number and severity of traffic accidents. It defines the spectrum usage requirements and protection parameters for communications equipment: • Primarily vehicle to vehicle. • Vehicle to roadside/infrastructure. It includes necessary information to support the co-operation between ETSI and the Electronic Communications Committee (ECC) of the European Conference of Post and Telecommunications Administrations (CEPT), including: • Market information (annex A). • Technical information (annex B). • Expected compatibility issues (annex C).
|
102 491
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); TETRA Enhanced Data Service (TEDS); System reference document
|
TR
|
1.2.1
|
http://www.etsi.org/deliver/etsi_tr/102400_102499/102491/01.02.01_60/tr_102491v010201p.pdf
|
The present document defines the requirements for radio frequency usage for TETRA Enhanced Data Service (TEDS). TEDS is a technical development that integrates a high speed data delivery with V+D as opposed to TETRA TAPS that is a non-integrated supplementary service. The market requirements and priorities set out in the present document are covering the user views and are generic to TAPS and TEDS. TEDS however is considered a better match for the emergency services than TAPS because of its integrated nature and security level common to TETRA V+D. It includes necessary information to support the co-operation between ETSI and the Electronic Communications Committee (ECC) of the European Conference of Post and Telecommunications Administrations (CEPT), including: • Detailed market information (annex A). • Technical information (annex B). • Expected compatibility issues (annex C).
|
102 489
|
Environmental Engineering (EE); European telecommunications standard for equipment practice; Thermal management guidance for equipment and its deployment
|
TR
|
1.4.1
|
http://www.etsi.org/deliver/etsi_tr/102400_102499/102489/01.04.01_60/tr_102489v010401p.pdf
|
The present document is an aid for all integrators of Information and Communication Technologies (ICT) equipment to minimize thermal problems. It establishes recommendations for the thermal management of racks/cabinets, miscellaneous racks/cabinets and locations. The present document considers telecommunication Central Office (CO) and Data Centers (DC) locations. The present document considers only the thermal factors. The integrator should consider the thermal factors in conjunction with the ETSI EN 300 019-1-3 [i.1] and other non-thermal factors.
|
102 485
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Technical characteristics for Broadband Disaster Relief applications (BB-DR) for emergency services in disaster situations; System Reference Document
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102400_102499/102485/01.01.01_60/tr_102485v010101p.pdf
|
The present document describes the requirements for radio frequency usage for broadband disaster relief applications around 5 GHz. PP(2) BB-DR systems might be combined with a location functionality. Such additional functionality will have to make use of a much wider frequency range to achieve sufficient accuracy/resolution and, as such, is outside of the scope of the present document. The present document includes necessary information to support the co-operation between ETSI and the Electronic Communications Committee (ECC) of the European Conference of Postal and Telecommunications Administrations (CEPT). Additional information is given in the following annexes: • detailed market information (annex A); • technical information (annex B); • expected compatibility issues (annex C).
|
102 479
|
Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); Review of available material on QoS requirements of Multimedia Services
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102400_102499/102479/01.01.01_60/tr_102479v010101p.pdf
|
The present document provides an overview of factors that influence user perceived quality in TISPAN compliant systems supporting multimedia applications. Multimedia applications are defined as those which combine different media types with potentially fundamentally different properties and inter-relationships. Examples of media types are audio, video, animation, still pictures, graphics and data (text). Multimedia applications include videoconferencing, audio streaming, CCTV, broadcast TV, etc. Although part of an integrated application, media flows within multimedia applications may be very different in terms of transmission quality requirements. The present document defines the audio and video quality requirements for a variety of multimedia applications involving conversational and streaming media flows and the transmission quality requirements to support these in TISPAN systems. Video applications are restricted to those involving screens of medium size (12') and upwards. A classification system is included to describe the quality aspects of multimedia systems, their media components and the transmission quality requirements in TISPAN systems. Issues of Media synchronization are also included.
|
102 478
|
Corporate telecommunication Networks (CN); Enterprise communication involving Next Generation carrier Networks (NGN)
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102400_102499/102478/01.01.01_60/tr_102478v010101p.pdf
|
The present document identifies key use cases for communication with or between IP-based Next Generation Corporate Networks (NGCN) involving public next generation networks (NGN), analyses these use cases in terms of available or planned standardized technology and identifies requirements that will have to be met. The present document investigates configurations involving NGCNs and NGNs and their interoperating requirements. Non-IP-based interoperation, i.e. using circuit-switched technology, between NGCNs and NGNs is outside the scope of the present document. The present document does not discriminate between wireless and wired access technology. All mobility aspects are outside the scope of the present document. They are covered by a companion Technical Report ECMA TR/92 [1]. Application considerations such as IP Centrex and CSTA (Computer Supported Telecommunications Applications) are outside the scope of the present document.
|
102 477
|
Corporate Telecommunication Networks - Mobility for Enterprise Communications
|
TR
|
2.1.1
|
http://www.etsi.org/deliver/etsi_tr/102400_102499/102477/02.01.01_60/tr_102477v020101p.pdf
|
Mobility for enterprise communications is the ability for persons and objects, e.g. vehicles, sensors and other machines, belonging to the enterprise to use communication and information services regardless of changes in their physical location. This includes also the ability to be reached by other persons or objects for communications. The present document encompasses the mobility of enterprise users connecting to enterprise and public IP networks using wired and wireless terminals for voice, data and converged services. It defines terms for different types of mobility, describes basic functionality in support of mobility, and lists common deployment scenarios. For each scenario the report identifies functional requirements and standardization gaps with the main focus on the management of mobility, identity, terminals and reachability. However, it does not provide technical solutions but lays the foundations for triggering standardization projects in areas where gaps have been identified. More general aspects of enterprise communications based on Next Generation Corporate Networks (NGCN) and interconnection with Next Generation Networks (NGN) are covered by the companion series of ECMA Technical Reports on NGCN [i.1], [i.2], [i.3] and [i.4].
|
102 477
|
Corporate telecommunication Networks (CN); Mobility for enterprise communication
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102400_102499/102477/01.01.01_60/tr_102477v010101p.pdf
|
Mobility for enterprise communications is the ability for persons and objects, e.g. vehicles, sensors and other machines, belonging to the enterprise to use communication and information services regardless of changes in their physical location. This includes also the ability to be reached by other persons or objects for communications. The present document encompasses the mobility of enterprise users connecting to enterprise and public IP networks using wired and wireless terminals for voice, data and converged services. It defines terms for different types of mobility, describes basic functionality in support of mobility, and lists common deployment scenarios. For each scenario the report identifies functional requirements and standardization gaps with the main focus on the management of mobility, identity, terminals and reachability. However, it does not provide technical solutions but lays the foundations for triggering standardization projects in areas where gaps have been identified. More general aspects of enterprise communications based on Next Generation Corporate Networks (NGCN) and interconnection with Next Generation Networks (NGN) are covered by the companion series of ECMA Technical Reports on NGCN [i.1], [i.2], [i.3] and [i.4].
|
102 476
|
Emergency Communications (EMTEL); Emergency calls and VoIP: possible short and long term solutions and standardization activities
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102400_102499/102476/01.01.01_60/tr_102476v010101p.pdf
|
The present document gives an overview of standardisation activities and summarises different methods for VoIP providers to deliver emergency communication services. VoIP is growing quickly, especially in countries with a high broadband penetration. Therefore the use of this technology for the provision of emergency communication services will be considered. For this, specific features can be introduced such as location and routing facilities. The present document is applicable to ETSI technical bodies for the defining of services and specifying technical solutions.
|
102 475
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission Systems; Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques; Test Report form for testing to EN 300 328 (V1.6.1) covering essential requirements of article 3.2 of the R&TTE Directive
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102400_102499/102475/01.01.01_60/tr_102475v010101p.pdf
|
The present report provides common text and formatting to be used in a Test Report for testing to EN 300 328 [3].
|
102 473
|
Digital Video Broadcasting (DVB); IP Datacast over DVB-H: Use Cases and Services
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102400_102499/102473/01.01.01_60/tr_102473v010101p.pdf
|
The present document reflects use cases and services which may be used with IP Datacast over DVB-H. Information on other parts of the system may be found in TS 102 468 [2].
|
102 469
|
Digital Video Broadcasting (DVB); IP Datacast over DVB-H: Architecture
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102400_102499/102469/01.01.01_60/tr_102469v010101p.pdf
|
The present document defines the reference architecture for services delivered by IP Datacast [7] over DVB-H [1]. The reference architecture is provided to illustrate the way the components in IP Datacast over DVB-H work together.
|
102 467
|
Satellite Earth Stations and Systems (SES); Broadband Satellite Multimedia (BSM); Transition to IPv06
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102400_102499/102467/01.01.01_60/tr_102467v010101p.pdf
|
The present document examins the transition to IPv6 is in the context of the forces motivating this transition and both the "end-game" services and architecture (when IPv6 is ubiquitous) and the transitional phase where interworking between IPv4 equipment and IPv6 equipment will become the norm. The purpose of this document is to survey the major technical and functional consequences of these developments on the BSM. It will consider the particular effects on the BSM Functional and Services Architecture as already developed in earlier Technical Reports and Technical Standards. By reference to these documents, especially references [24] to [30] and [36]. This Technical Report identifies areas of the BSM architecture where further Technical Specifications and Reports need to be developed to handle the issues arising from the transition to IPv6 (see clause 12). Aspects of address resolution, configuration management, performance and interworking will form the main focus of the work. Consideration will also be given to Quality of Service impacts, multicasting and security.
|
102 459
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); TETRA Air-Ground-Air Services (AGA); Systems reference document
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102400_102499/102459/01.01.01_60/tr_102459v010101p.pdf
|
The present document defines the requirements for radio frequency usage for TETRA Air-Ground-Air services (AGA) for emergency services.
|
102 457
|
Fixed Radio Systems; Evaluation of the ElectroMagnetic Field (EMF) radiated by Line-of-Sight (LoS) fixed radio stations using parabolic dish directional antennas
|
TR
|
2.1.0
|
http://www.etsi.org/deliver/etsi_tr/102400_102499/102457/02.01.00_60/tr_102457v020100p.pdf
|
The present document provides guidelines for assessing the compliance of human exposure to established RF exposure limits based on the evaluation of the electromagnetic fields in the main beam emission of fixed service radio (base) stations when operating in line-of-sight (LoS) using directional parabolic (dish) antennas (e.g. in Point to Point applications). The methodology may be applicable also to other fixed radio stations provided that they use similar directional parabolic antenna type (e.g. for some terminals in Point to Multipoint and Multipoint to Multipoint systems). Fixed radio stations using sector and omni-directional antennas are not in the scope of the present document. Fixed service radio stations in the scope of the present document may use integral/integrated antennas or dedicated antennas, supplied by the same manufacturer, or stand-alone antennas from different manufacturer, but compliant to radio equipment manufacturer specifications; detailed definition of those antenna types are found in ETSI EN 302 217-1 [i.10]. Article 3.1a of the 2014/53/EU Directive [i.1], provides essential requirement for health and safety. Council Recommendation 1999/519/EC [i.2] (for general public) and Directive 2013/35/EU (for workers) gives recommended limits for exposure to electromagnetic fields based on the ICNIRP guidelines [i.6]. Assessment of compliance to article 3.1a of the 2014/53/EU Directive [i.1] of equipment in the scope of the present document and to the requirements defined in the Directive 2013/35/EU [i.3] (for workers) and Council Recommendation 1999/519/EC [i.2] (for general public) may be carried on based on harmonised standards CENELEC EN 50385 [i.9] for placing equipment on the market and CENELEC EN 50401 [i.8] for putting them into service. The present document considers these exposure limits for comparison; calculations and measurements are reported. The guidelines presented may be used for calculation of the compliance boundaries as required by CENELEC EN 50385 [i.9] and CENELEC EN 50401 [i.8]. The simplified assessment method described is derived from measurement and calculation techniques defined in clause 8 of CENELEC EN 62232 [i.7] (see note) and may help in the compliance assessment of the above mentioned fixed service radio stations. Definitions from the above mentioned EN standards are used in the present document where appropriate. NOTE: CENELEC EN 62232 [i.7] considers a very broad types of radio antennas used in Base Stations (including Fixed Radio Stations) and is presently limited to 100 GHz; however, in specific case of parabolic (dish) antennas, the electromagnetic field generation is dominated by purely geometrical factors (related to the D/λ ratio); therefore, the methodology in the present document is considered applicable also to fixed service stations operating at higher frequency up to 300 GHz. The maximum electric field or power density evaluation is based on calculations and measurements performed with the most common configurations and the values are tabulated. The measurement and calculation results on real systems that have been used to establish the method are also provided to give an estimation on the accuracy of the method adopted.
|
102 457
|
Transmission and Multiplexing (TM); Study on the electromagnetic radiated field in fixed radio systems for environmental issues
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102400_102499/102457/01.01.01_60/tr_102457v010101p.pdf
|
The present document provides guidelines for assessing the compliance of human exposure to established RF exposure limits based on the evaluation of the electromagnetic fields in the main beam emission of fixed service radio (base) stations when operating in line-of-sight (LoS) using directional parabolic (dish) antennas (e.g. in Point to Point applications). The methodology may be applicable also to other fixed radio stations provided that they use similar directional parabolic antenna type (e.g. for some terminals in Point to Multipoint and Multipoint to Multipoint systems). Fixed radio stations using sector and omni-directional antennas are not in the scope of the present document. Fixed service radio stations in the scope of the present document may use integral/integrated antennas or dedicated antennas, supplied by the same manufacturer, or stand-alone antennas from different manufacturer, but compliant to radio equipment manufacturer specifications; detailed definition of those antenna types are found in ETSI EN 302 217-1 [i.10]. Article 3.1a of the 2014/53/EU Directive [i.1], provides essential requirement for health and safety. Council Recommendation 1999/519/EC [i.2] (for general public) and Directive 2013/35/EU (for workers) gives recommended limits for exposure to electromagnetic fields based on the ICNIRP guidelines [i.6]. Assessment of compliance to article 3.1a of the 2014/53/EU Directive [i.1] of equipment in the scope of the present document and to the requirements defined in the Directive 2013/35/EU [i.3] (for workers) and Council Recommendation 1999/519/EC [i.2] (for general public) may be carried on based on harmonised standards CENELEC EN 50385 [i.9] for placing equipment on the market and CENELEC EN 50401 [i.8] for putting them into service. The present document considers these exposure limits for comparison; calculations and measurements are reported. The guidelines presented may be used for calculation of the compliance boundaries as required by CENELEC EN 50385 [i.9] and CENELEC EN 50401 [i.8]. The simplified assessment method described is derived from measurement and calculation techniques defined in clause 8 of CENELEC EN 62232 [i.7] (see note) and may help in the compliance assessment of the above mentioned fixed service radio stations. Definitions from the above mentioned EN standards are used in the present document where appropriate. NOTE: CENELEC EN 62232 [i.7] considers a very broad types of radio antennas used in Base Stations (including Fixed Radio Stations) and is presently limited to 100 GHz; however, in specific case of parabolic (dish) antennas, the electromagnetic field generation is dominated by purely geometrical factors (related to the D/λ ratio); therefore, the methodology in the present document is considered applicable also to fixed service stations operating at higher frequency up to 300 GHz. The maximum electric field or power density evaluation is based on calculations and measurements performed with the most common configurations and the values are tabulated. The measurement and calculation results on real systems that have been used to establish the method are also provided to give an estimation on the accuracy of the method adopted.
|
102 453-1
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Converged Fixed-Nomadic Broadband Wireless Access (BWA); Part 1: Frequencies above 3,4 GHz - System reference document
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102400_102499/10245301/01.01.01_60/tr_10245301v010101p.pdf
|
The present document defines the spectrum requirements based on new standardization and the evolving market requirements for Converged Fixed-Nomadic broadband wireless access systems above 3,4 GHz. The information in the present document is mainly derived from standardization activities within ETSI BRAN HiperMAN and IEEE 802.16 [4], which are subject to a cooperation agreement for harmonizing the relevant standards. In the present document, the term "nomadic" is used in accordance with the definition in ITU-R Recommendation F.1399 [12] that quotes: "the location of the end-user termination may be in different places but it must be stationary while in use". Part 1 takes into account the fact that there are established frequency bands already identified within the ECC framework for BFWA and/or P-MP (e.g. 3,4 GHz to 3,6 GHz), and additionally, identifies interest in adjacent frequency bands, specifically up to 4,2 GHz. It includes necessary information to support the co-operation between ETSI and the Electronic Communication Committee (ECC) of the European Conference of Post and Telecommunications Administrations (CEPT), including: • Detailed market information (annex A). • Technical information (annex B). • Expected compatibility issues (annex C).
|
102 450
|
Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); Telecommunication Equipment Life Cycle
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102400_102499/102450/01.01.01_60/tr_102450v010101p.pdf
|
The present document describes the complete telecommunications equipment life cycle, including relevant participants (e.g. suppliers, service providers, resellers) and relevant equipment states, processes and events. These states, processes and events are related to hardware, firmware and software. The present document addresses equipment lifecycle for all, telecommunication equipment that could be part of a telecommunication network (e.g. Transport, Switching, Access including CPE, Power) and for all technologies (e.g. IT, IP, Wi-Fi, Wireless, DWDM, SDH/SONET). The purpose of the present document is to identify life cycle modelling requirements which will need to be met by equipment management specifications e.g. MIB, information data model, equipment identifiers. The description of the lifecycle which takes place within the service providers environment is based on the concepts of TMF eTOM [3]. The lifecycle part which takes place within the equipment suppliers environment is described using the SCOR model [7] as the eTOM model does not currently address their environment. The present document identifies areas for potential future activities to be carried out by either by ETSI or individual companies. The present document extends the equipment information work i.e. TR 102 214 [9], TS 102 209 [1], TS 102 359 [2]. NOTE: The purpose of the present document is to describe the life cycle of an equipment item and related processes, but not to cover all possible business relationships.
|
102 449
|
Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); Overview of Radio Frequency Identification (RFID) Tags in the telecommunications industry
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102400_102499/102449/01.01.01_60/tr_102449v010101p.pdf
|
The present document provides a technology and standards overview, lists some potential applications and presents some issues associated with implementing RFID in Telecommunications.
|
102 446
|
<empty>
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102400_102499/102446/01.01.01_60/tr_102446v010101p.pdf
|
The present document is a guidance on the characteristics have to be considered to have a coexistence of UPS with other equipment in a normal telecommunication installation. Due to the increasing IT/Telco convergence AC-powered infrastructure needs to be considered as well as DC-powered infrastructure. In order to ensure continuous operation of AC powered equipment, uninterruptible power systems (UPS) with AC-output can be used. In the present document the requirements (EMC-performance criterion and power-line influences) for UPS Systems of any rated output are recommended. Particularly it is considered that the UPS may coexist with standard Telecommunication equipment in a telecommunication centre. This UPS is responsible for the continuous (uninterruptible) supply of AC-powered Telecommunication- or Datacom equipment. The application of UPS for powering Telecommunication and Datacom equipment is provided in TR 102 121 [3].
|
102 445
|
Emergency Communications (EMTEL); Overview of Emergency Communications Network Resilience and Preparedness
|
TR
|
1.2.1
|
http://www.etsi.org/deliver/etsi_tr/102400_102499/102445/01.02.01_60/tr_102445v010201p.pdf
|
The present document presents resilience concepts and considers their application within technical systems enabling emergency communications. Furthermore, it considers preparedness of emergency communication services and proposes guidelines for specialized systems and capabilities.
|
102 444
|
Emergency Communications (EMTEL); Analysis of the Short Message Service (SMS) and Cell Broadcast Service (CBS) for Emergency Messaging applications; Emergency Messaging; SMS and CBS
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102400_102499/102444/01.01.01_60/tr_102444v010101p.pdf
|
The present document covers the analysis of SMS and CBS for Emergency Applications using mobile radio systems although TS 123 040 [1] makes provision for Short Messages to be originated or terminated at a suitably equipped fixed network termination.
|
102 443
|
Satellite Earth Stations and Systems (SES); Satellite Component of UMTS/IMT-2000; Evaluation of the OFDM as a Satellite Radio Interface
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102400_102499/102443/01.01.01_60/tr_102443v010101p.pdf
|
The present document entails a feasibility study that evaluates the use of the OFDM Radio Interface proposed the 3GPP TR 25.892 [i.1] as Satellite Radio Interface on the satellite downlink, presenting physical layer results and link budget studies. The present document contains informative elements that should serve as a starting point for the definition and finalization of advanced Satellite Radio Interfaces. The adoption of the OFDM Radio Interface results in higher link margin under key propagation conditions such as the NLOS propagation case and when CGCs are considered.
|
102 439
|
Broadband Radio Access Networks (BRAN); Test Report Template for testing to EN 301 893 ( V1.3.1) (R&TTE)
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102400_102499/102439/01.01.01_60/tr_102439v010101p.pdf
|
It is expected that Test Report Templates from ETSI would be useful for national conformity assessment bodies and market surveillance authorities in countries where the R&TTE is in force, as well as for the assistance of manufacturers and test houses, although such a Report Template would remain voluntary. As such, test Report Templates for testing against Harmonized Standards may be used: - in countries where the R&TTE Directive [1] is in force, for manufacturers' self testing; - in countries where the R&TTE Directive [1] is in force, for the purpose of third-party testing; - in countries where the R&TTE Directive [1] is in force, for parameters that Administrations may wish to have tested by a third-party (e.g. in the case of market surveillance/enforcement); - in countries where the R&TTE Directive [1] is not in force, for the purpose of third-party testing and Type Approval. The present report recommends text and formatting to be used in Test Reports for equipment being assessed to EN 301 893 [2]. Other editions of EN 301 893 [2] may require a different format to cover additional or different test requirements than those contained in these edition. This will be the subject of further work.
|
102 438
|
Electronic Signatures and Infrastructures (ESI); Application of Electronic Signature Standards in Europe
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102400_102499/102438/01.01.01_60/tr_102438v010101p.pdf
|
A number of initiatives were started in Europe, funded by the European Commission, in order to provide support to the Directives that apply electronic signatures and have their roots in Directive 1999/93/EC [1], among which Directive 2001/115/EC [2] addressing invoicing in respect of value added tax. These initiatives regard, or regarded, the following subjects: e-invoicing, e-procurement, e-authentication. They also address electronic storage and have furtherance on development of CWA 14890 Smart Card. Electronic registered email is also being developed inside and outside Europe. All these subjects are impacted by, and may benefit from, the documents on electronic signature that were developed by ETSI TC ESI, along with the CEN Workshop El-sign. ETSI has launched an STF to harmonize the above mentioned initiatives to the existing ETSI Technical Specification (TS), in order to optimize interoperability. The present document presents the results of this work to assist in the harmonization of the use of election signature standards across Europe. Where other bodies activities were already closed when STF 288 was launched, or closed during the STF 288 performing time, reports are attached as annexes summarizing, through abstracts and extracts, the documents issued by the such bodies.
|
102 436
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD) intended for operation in the bands 865 MHz to 868 MHz and 915 MHz to 921 MHz; Guidelines for the installation and commissioning of Radio Frequency Identification (RFID) equipment at UHF
|
TR
|
2.1.1
|
http://www.etsi.org/deliver/etsi_tr/102400_102499/102436/02.01.01_60/tr_102436v020101p.pdf
|
The present document provides recommendations to system integrators and installers on good practice for the installation and commissioning of RFID systems operating at UHF at power levels up to 4 W e.r.p. Guidance is given on making best use of the available spectrum as envisaged within the ETSI standard EN 302 208 [i.1]. In addition the present document covers the use of reduced power RFID devices at UHF, such as hand held readers and proximity printers, operating in accordance with EN 300 220 [i.2]. This includes operation in the sub-bands 869,40 - 869,65 MHz at power levels of 500 mW and 869,7 - 870,0 MHz at power levels of 5 mW. In particular the present document considers the practices necessary to minimize interference in situations where multiple interrogators are co-located in close proximity. Failure to take the necessary precautions could lead to degradation in system performance. The present document also endeavours to cover the approaches necessary to ensure that the operational requirements of the end-user are met. The present document concerns itself with radio matters only. It does not provide any guidance on computer hardware and software that may be used to process the data recovered from tags. Many of the techniques recommended in the present document have been subject to practical tests in a working distribution centre. However each application is different and the techniques recommended in the present document may not be applicable in all situations. End users may wish to make use of the present document as a general guide. The present document does not cover matters related to Health and Safety. End-users and system integrators should familiarize themselves with the relevant national and international standards.
|
102 436
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD) intended for operation in the band 865 MHz to 868 MHz; Guidelines for the installation and commissioning of Radio Frequency Identification (RFID) equipment at UHF
|
TR
|
1.2.1
|
http://www.etsi.org/deliver/etsi_tr/102400_102499/102436/01.02.01_60/tr_102436v010201p.pdf
|
The present document provides recommendations to system integrators and installers on good practice for the installation and commissioning of RFID systems operating at UHF at power levels up to 4 W e.r.p. Guidance is given on making best use of the available spectrum as envisaged within the ETSI standard EN 302 208 [i.1]. In addition the present document covers the use of reduced power RFID devices at UHF, such as hand held readers and proximity printers, operating in accordance with EN 300 220 [i.2]. This includes operation in the sub-bands 869,40 - 869,65 MHz at power levels of 500 mW and 869,7 - 870,0 MHz at power levels of 5 mW. In particular the present document considers the practices necessary to minimize interference in situations where multiple interrogators are co-located in close proximity. Failure to take the necessary precautions could lead to degradation in system performance. The present document also endeavours to cover the approaches necessary to ensure that the operational requirements of the end-user are met. The present document concerns itself with radio matters only. It does not provide any guidance on computer hardware and software that may be used to process the data recovered from tags. Many of the techniques recommended in the present document have been subject to practical tests in a working distribution centre. However each application is different and the techniques recommended in the present document may not be applicable in all situations. End users may wish to make use of the present document as a general guide. The present document does not cover matters related to Health and Safety. End-users and system integrators should familiarize themselves with the relevant national and international standards.
|
102 434
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Alternative Interference Mitigation Technologies to Listen Before Talk (LBT) for Ultra Low Power Active Medical Implants (ULP-AMI) operating from 403,5 MHz to 403,8 MHz with a duty cycle of less than or equal to 0,01%; System Reference Document
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102400_102499/102434/01.01.01_60/tr_102434v010101p.pdf
|
The present document defines the requirements for radio frequency spectrum usage for single channel ULP - AMI active medical implants and peripherals operating from 403,5 MHz to 403,8 MHz (nominal centre frequency of 403,65 MHz) and having a duty cycle of less than or equal to 0,01 %. The technical characteristics of these devices along with the benefits of this access method are described. A single channel, low duty cycle (less than or equal to 0,01 %) ULP-AMI is proposed as an alternative option to LBT and frequency agility as interference mitigation technology which ensures the assigned spectrum remains clear and available to all users of the spectrum. This type of operation is limited only to ULP-AMI (implants) and is not permitted for ULP-AMI-P (peripheral equipment). The proposed SRDoc prohibits external device to external device communication. The present document includes necessary information to support the co-operation between ETSI and the Electronic Communications Committee (ECC) of the European Conference of Post and Telecommunications Administrations (CEPT), including: • Detailed market information (annex A); • Technical information (annex B); • Expected compatibility issues (annex C). It is not proposed to change the current regulations.
|
102 433
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Digital Private Mobile Radio (DPMR) using a channel spacing of 6,25 kHz and operating in specified VHF and UHF bands under general authorization without individual rights; System reference document
|
TR
|
1.2.1
|
http://www.etsi.org/deliver/etsi_tr/102400_102499/102433/01.02.01_60/tr_102433v010201p.pdf
|
The present document has been developed in order to provide information on the usage of radio frequencies for digital land mobile radio equipment offering peer-to-peer functionality complying with DPMR specifications (referenced later in the present document as "DPMR") using a channel spacing of 6,25 kHz and operating in the 446,1 MHz to 446,2 MHz and/or 149,01875 MHz to 149,11875 MHz frequency bands, both under general-authorization-with-no- individual-rights operation. It includes necessary information to support the co-operation between ETSI and the Electronic Communications Committee (ECC) of the European Conference of Post and Telecommunications administrations (CEPT), including: • Detailed market information (annex A). • Technical information (annex B). • Expected compatibility issues (annex C).
|
102 430
|
Speech Processing, Transmission and Quality Aspects (STQ); Basic Issues concerning the Quality of Speech over Packet Technology (both Internet and Next Generation Networks)
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102400_102499/102430/01.01.01_60/tr_102430v010101p.pdf
|
The present document gives an overview and critique of the current developments in speech quality in packet based networks, including both the Internet and planned Next Generation Networks. The aim is to provide an overview of the main issues and their significance and to identify areas that need further work. The present document is written at a level suitable for technical managers and engineers who are relatively new to the subject. It does not cover the issues at the depth that will be needed by a detailed specialist but its breadth should provide a valuable perspective for the specialist. The present document includes a discussion of how the market for telecommunications is developing and how the issues concerning speech quality in packet based networks will play a pivotal role in the increasing competition between the proposed telco NGN networks and the public Internet. The present document attempts to answer the following questions: - What are the main issues? - Which issues are being solved satisfactorily? - How useful are the various approaches? - Can end-end quality be guaranteed? - How vulnerable is voice quality in a packet environment? - How do you design for good quality? - Do we need end-end signalling or lower layer class based treatment or both? The present document is applicable to all forms of real-time 2-way conversational speech communications over packet based networks, including both telco NGN networks and the public Internet.
|
102 422
|
<empty>
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102400_102499/102422/01.01.01_60/tr_102422v010101p.pdf
|
The present document describes a testing methodology for the functional qualification of the mobile network infrastructure for the IP Multimedia Subsystem (IMS) R5. The methodology proposed is concerned to the infrastructure and not to the IMS services, hence the analysis of the Application Servers interfaces is beyond the scope of the present document. General charging aspects will be also considered. For a checking of the IMS CN infrastructure it is suggested to test a series of reference scenarios analysing the corresponding signal messages regarding the internal interfaces of the involved nodes: IuPS, Gn, Mw, Gm, Go, Mi, Mj, Mk, Mg, Mn/Mc, Cx and Rf. Nodes and interfaces involved in each specific scenario constitute testing infrastructure. Ten configurations were shown in order to test procedures from part of Mobility management, Session setup, Session Control, Enhanced Multimedia Services and Charging. The different scenarios cover single operator, multiple operator and roaming configurations. Furthermore some are intended to test PLMN-PSTN interworking.
|
102 420
|
Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); Review of activity on security
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102400_102499/102420/01.01.01_60/tr_102420v010101p.pdf
|
The present document gathers together and presents information regarding the progress of work in the development of guidelines on the use of the Common Criteria for the evaluation of IT security (ISO/IEC 15408 [22]). The purpose of the present document is to be a repository for information which is of interest but which has no clear place in the core guidance documents, thus: • notes on information studied in order to prepare the core guidance documents: - method for application of Common Criteria to ETSI deliverables, EG 202 387 [1]; - method and proforma for defining Protection Profiles, ES 202 382 [2]; - method and proforma for defining Security Targets, ES 202 383 [3]. • notes on use of tools and tool development; and • notes on the assistance given to TISPAN-WG4 on the ENUM privacy analysis.
|
102 419
|
<empty>
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102400_102499/102419/01.01.01_60/tr_102419v010101p.pdf
|
The present document provides an analysis of the security provisions made in IPv6 and outlines how they may be used to support the objectives of the European Commission to support the implementation of PKI solutions and the further deployment of IPv6 and IPsec.
|
102 415
|
Human Factors (HF); Telecare services; Issues and recommendations for user aspects
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102400_102499/102415/01.01.01_60/tr_102415v010101p.pdf
|
The present document addresses the end user aspects of telecare, with emphasis on the delivery of health and social care services, in and outside of connected (intelligent) homes, with the purpose of ensuring that human factors aspects are duly considered in the current rapid progress towards ICT-based delivery of health care services. The present document identifies key stakeholders including end users (comprising clients, the person in need of care and health professionals, informal carers and care coordinators), their objectives and requirements, with the following perspectives: • the enhancement of human interaction by ICT; • proliferation of personal data and privacy concerns; and • safety and security of equipment use, mis-use, non-use and malfunctioning. Furthermore, the present document identifies and examines technical, organizational and cost-related barriers to the widespread deployment, adoption and use of telecare services, and recommends strategies to overcome these barriers. The present document takes into account requirements of the widest possible generic client population, including the needs of older people, babies, children and disabled clients. The present document provides generic guidance and specific recommendations to standards developers, operators, service providers, equipment suppliers, policy makers, designers and users of telecare services, applicable to: • telecare service provision elements; • stakeholders' concerns; and • ethical, privacy and security aspects. The present document should be considered as a human factors and user experience standardization study, "setting the scene". In addition, the present document provides recommendations for future work, including the development of human factors guidelines, recommended to be initiated as soon as possible.
|
102 410
|
Emergency Communications (EMTEL); Basis of requirements for communications between individuals and between individuals and authorities whilst emergencies are in progress
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102400_102499/102410/01.01.01_60/tr_102410v010101p.pdf
|
The present document addresses the requirements for communication facilities among individuals and to authorities/organizations, Non Governmental Organizations (NGO) and media while emergencies are in progress, not including alerting communication. The proposals given here complement the facilities specified in TR 102 180, TS 102 181 and TS 102 182. Although many suggested requirements collected from network operators, service providers (e.g. emergency response organizations) and users relate to national public policies and regulation, there are a number of service and technical aspects which are better dealt with on the European level to ensure harmonized access and services. Standardized solutions may foster increased user awareness and better utilization of the services. The present document identifies potential areas needing particular attention from the experts and refers to identified documents in preparation in Standards Development Organizations. The scope of the present document covers aspects from small scale to large scale incidents. The present document outlines the basis for technical, network operational, network organizational and regulatory requirements which could be applied to existing as well as future networks and infrastructure.
|
102 401
|
Digital Video Broadcasting (DVB); Transmission to Handheld Terminals (DVB-H); Validation Task Force Report
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102400_102499/102401/01.01.01_60/tr_102401v010101p.pdf
|
DVB-H consists of a collection of simple technical ingredients spread over several layers of the Digital TV production chain. Therefore, the DVB-H complexity is more related to the overall transmission system than to the individual techniques used to provide efficient delivery to handheld terminals. This suggested to the DVB-H ad-hoc group of the DVB Technical Module to organize a validation exercise in order: • To find any inaccuracies in the set of the standards related to DVB-H. • To help early implementers of the DVB-H network and terminals equipments. • To estimate the performance of DVB-H (as far as possible). From September to December 2004, the VTF group defined a "Test Methodology" and performed two test sessions: • Laboratory Tests took place during the second half of October, kindly hosted by T-Systems in Berlin (Germany). • Field Trials took place in mid-December, kindly organized by Telediffusion de France in Metz (France). The present document reports on the collaborative explorative work performed by the DVB-H Validation Task Force.
|
102 400
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Intelligent Transport Systems (ITS); Road Traffic and Transport Telematics (RTTT); Technical characteristics for communications equipment in the frequency band from 63 GHz to 64 GHz; System Reference Document
|
TR
|
1.2.1
|
http://www.etsi.org/deliver/etsi_tr/102400_102499/102400/01.02.01_60/tr_102400v010201p.pdf
|
The present document defines the requirements for radio frequency usage for RTTT and ITS equipment operating in the 63 GHz to 64 GHz frequency range. It includes necessary information to support the co-operation between ETSI and the Electronic Communications Committee (ECC) of the European Conference of Post and Telecommunications Administrations (CEPT), including: • market information (annex A); • technical information (annex B); • expected compatibility issues (annex C).
|
102 398
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Digital Mobile Radio (DMR) General System Design
|
TR
|
1.5.1
|
http://www.etsi.org/deliver/etsi_tr/102300_102399/102398/01.05.01_60/tr_102398v010501p.pdf
|
The present document is written as a "Read-me-first" manual or "Getting started with DMR". It is not intended to be a complete guide to the DMR technical specifications. If any conflict is found between the present document and the clauses in the DMR specifications then the technical specifications in ETSI TS 102 361 (all parts) [i.1] to [i.4] take precedence. The aims of the present document are many, for example: 1) to provide the reader with sufficient knowledge to engage in qualified discussions with the equipment and service suppliers; 2) to expose the reader to the specific language and technical terminology used in the DMR specifications; 3) to enable the reader to understand the flexibility in system design, system network topography, system availability and various modes of operation; 4) information on radio aspects and network design and management is given.
|
102 397-14-2
|
Open Service Access (OSA); Mapping of Parlay X Web Services to Parlay/OSA APIs; Part 14: Presence Mapping; Sub-part 2: Mapping to SIP/IMS Networks
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102300_102399/1023971402/01.01.01_60/tr_1023971402v010101p.pdf
|
The Parlay X Web Services provide powerful yet simple, highly abstracted, imaginative, telecommunications functions that application developers and the IT community can both quickly comprehend and use to generate new, innovative applications. The Open Service Access (OSA) specifications define an architecture that enables application developers to make use of network functionality through an open standardized interface, i.e. the Parlay/OSA APIs. IP Multimedia Subsystem (IMS) is a Core Network architecture for supporting multimedia services via a SIP infrastructure. The present document specifies the mapping of the Parlay X Presence Web Service to SIP/IMS Networks.
|
102 397-14-1
|
Open Service Access (OSA); Mapping of Parlay X Web Services to Parlay/OSA APIs; Part 14: Presence Mapping; Sub-part 1: Mapping to Presence and Availability Management
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102300_102399/1023971401/01.01.01_60/tr_1023971401v010101p.pdf
|
The Parlay X Web Services provide powerful yet simple, highly abstracted, imaginative, telecommunications functions that application developers and the IT community can both quickly comprehend and use to generate new, innovative applications. The Open Service Access (OSA) specifications define an architecture that enables application developers to make use of network functionality through an open standardized interface, i.e. the Parlay/OSA APIs. The present document specifies the mapping of the Parlay X Presence Web Service to the Presence and Availability Management (PAM) Service Capability Feature (SCF).
|
102 397-12
|
Open Service Access (OSA); Mapping of Parlay X Web Services to Parlay/OSA APIs; Part 12: Multimedia Conference Mapping
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102300_102399/10239712/01.01.01_60/tr_10239712v010101p.pdf
|
The Parlay X Web Services provide powerful yet simple, highly abstracted, imaginative, telecommunications functions that application developers and the IT community can both quickly comprehend and use to generate new, innovative applications. The Open Service Access (OSA) specifications define an architecture that enables application developers to make use of network functionality through an open standardized interface, i.e. the Parlay/OSA APIs. The present document specifies the mapping of the Parlay X Multimedia Conference Web Service to the Multi-Party Call Control and Multi-Media Call Control Service Capability Features (SCFs).
|
102 397-11-2
|
Open Service Access (OSA); Mapping of Parlay X Web Services to Parlay/OSA APIs; Part 11: Audio Call Mapping; Sub-part 2: Mapping to Multi-Party Call Control and User Interaction
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102300_102399/1023971102/01.01.01_60/tr_1023971102v010101p.pdf
|
The present document specifies the mapping of the Parlay X Audio Call Web Service to the Multi-Party Call Control and User Interaction Service Capability Features (SCFs). The Parlay X Web Services provide powerful yet simple, highly abstracted, imaginative, telecommunications functions that application developers and the IT community can both quickly comprehend and use to generate new, innovative applications. The Open Service Access (OSA) specifications define an architecture that enables application developers to make use of network functionality through an open standardized interface, i.e. the Parlay/OSA APIs.
|
102 397-11-1
|
Open Service Access (OSA); Mapping of Parlay X Web Services to Parlay/OSA APIs; Part 11: Audio Call Mapping; Sub-part 1: Mapping to Generic Call Control and User Interaction
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102300_102399/1023971101/01.01.01_60/tr_1023971101v010101p.pdf
|
The present document specifies the mapping of the Parlay X Audio Call Web Service to the Generic Call Control and User Interaction Service Capability Features (SCFs). The Parlay X Web Services provide powerful yet simple, highly abstracted, imaginative, telecommunications functions that application developers and the IT community can both quickly comprehend and use to generate new, innovative applications. The Open Service Access (OSA) specifications define an architecture that enables application developers to make use of network functionality through an open standardized interface, i.e. the Parlay/OSA APIs.
|
102 397-10-2
|
Open Service Access (OSA); Mapping of Parlay X Web Services to Parlay/OSA APIs; Part 10: Call Handling Mapping; Sub-part 2: Mapping to Multi-Party Call Control and User Interaction
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102300_102399/1023971002/01.01.01_60/tr_1023971002v010101p.pdf
|
The present document specifies the mapping of the Parlay X Call Handling Web Service to the Multi-Party Call Control and User Interaction Service Capability Features (SCFs). The Parlay X Web Services provide powerful yet simple, highly abstracted, imaginative, telecommunications functions that application developers and the IT community can both quickly comprehend and use to generate new, innovative applications. The Open Service Access (OSA) specifications define an architecture that enables application developers to make use of network functionality through an open standardized interface, i.e. the Parlay/OSA APIs.
|
102 397-10-1
|
Open Service Access (OSA); Mapping of Parlay X Web Services to Parlay/OSA APIs; Part 10: Call Handling Mapping; Sub-part 1: Mapping to Generic Call Control and User Interaction
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102300_102399/1023971001/01.01.01_60/tr_1023971001v010101p.pdf
|
The present document specifies the mapping of the Parlay X Call Handling Web Service to the Generic Call Control and User Interaction Service Capability Features (SCFs). The Parlay X Web Services provide powerful yet simple, highly abstracted, imaginative, telecommunications functions that application developers and the IT community can both quickly comprehend and use to generate new, innovative applications. The Open Service Access (OSA) specifications define an architecture that enables application developers to make use of network functionality through an open standardized interface, i.e. the Parlay/OSA APIs.
|
102 397-9-2
|
Open Service Access (OSA); Mapping of Parlay X Web Services to Parlay/OSA APIs; Part 9: Terminal Location Mapping; Sub-part 2: Mapping to Mobility User Location CAMEL
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102300_102399/1023970902/01.01.01_60/tr_1023970902v010101p.pdf
|
The present document specifies the mapping of the Parlay X Terminal Location Web Service to the Mobility User Location CAMEL Service Capability Feature (SCF). The Parlay X Web Services provide powerful yet simple, highly abstracted, imaginative, telecommunications functions that application developers and the IT community can both quickly comprehend and use to generate new, innovative applications. The Open Service Access (OSA) specifications define an architecture that enables application developers to make use of network functionality through an open standardized interface, i.e. the Parlay/OSA APIs.
|
102 397-9-1
|
Open Service Access (OSA); Mapping of Parlay X Web Services to Parlay/OSA APIs; Part 9: Terminal Location Mapping; Sub-part 1: Mapping to Mobility User Location
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102300_102399/1023970901/01.01.01_60/tr_1023970901v010101p.pdf
|
The present document specifies the mapping of the Parlay X Terminal Location Web Service to the Mobility User Location Service Capability Feature (SCF). The Parlay X Web Services provide powerful yet simple, highly abstracted, imaginative, telecommunications functions that application developers and the IT community can both quickly comprehend and use to generate new, innovative applications. The Open Service Access (OSA) specifications define an architecture that enables application developers to make use of network functionality through an open standardized interface, i.e. the Parlay/OSA APIs.
|
102 397-8
|
Open Service Access (OSA); Mapping of Parlay X Web Services to Parlay/OSA APIs; Part 8: Terminal Status Mapping
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102300_102399/10239708/01.01.01_60/tr_10239708v010101p.pdf
|
The present document specifies the mapping of the Parlay X Terminal Status Web Service to the Mobility User Status Service Capability Feature (SCF). The Parlay X Web Services provide powerful yet simple, highly abstracted, imaginative, telecommunications functions that application developers and the IT community can both quickly comprehend and use to generate new, innovative applications. The Open Service Access (OSA) specifications define an architecture that enables application developers to make use of network functionality through an open standardized interface, i.e. the Parlay/OSA APIs.
|
102 397-7
|
Open Service Access (OSA); Mapping of Parlay X Web Services to Parlay/OSA APIs; Part 7: Account Management Mapping
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102300_102399/10239707/01.01.01_60/tr_10239707v010101p.pdf
|
The present document specifies the mapping of the Parlay X Account Management Web Service to the Account Management Service Capability Feature (SCF). The Parlay X Web Services provide powerful yet simple, highly abstracted, imaginative, telecommunications functions that application developers and the IT community can both quickly comprehend and use to generate new, innovative applications. The Open Service Access (OSA) specifications define an architecture that enables application developers to make use of network functionality through an open standardized interface, i.e. the Parlay/OSA APIs.
|
102 397-6
|
Open Service Access (OSA); Mapping of Parlay X Web Services to Parlay/OSA APIs; Part 6: Payment Mapping
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102300_102399/10239706/01.01.01_60/tr_10239706v010101p.pdf
|
The present document specifies the mapping of the Parlay X Payment Web Service to the Charging Service Capability Feature (SCF). The Parlay X Web Services provide powerful yet simple, highly abstracted, imaginative, telecommunications functions that application developers and the IT community can both quickly comprehend and use to generate new, innovative applications. The Open Service Access (OSA) specifications define an architecture that enables application developers to make use of network functionality through an open standardized interface, i.e. the Parlay/OSA APIs.
|
102 397-5-2
|
Open Service Access (OSA); Mapping of Parlay X Web Services to Parlay/OSA APIs; Part 5: Multimedia Messaging Mapping; Sub-part 2: Mapping to Multi-Media Messaging
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102300_102399/1023970502/01.01.01_60/tr_1023970502v010101p.pdf
|
The Parlay X Web Services provide powerful yet simple, highly abstracted, imaginative, telecommunications functions that application developers and the IT community can both quickly comprehend and use to generate new, innovative applications. The Open Service Access (OSA) specifications define an architecture that enables application developers to make use of network functionality through an open standardised interface, i.e. the Parlay/OSA APIs. The present document is part 5, sub-part 2, of an informative mapping of Parlay X Web Services to Parlay/OSA APIs. The present document specifies the mapping of the Parlay X Multimedia Messaging Web Service to the Parlay/OSA Multi-Media Messaging Service Capability Feature (SCF).
|
102 397-5-1
|
Open Service Access (OSA); Mapping of Parlay X Web Services to Parlay/OSA APIs; Part 5: Multimedia Messaging Mapping; Sub-part 1: Mapping to User Interaction
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102300_102399/1023970501/01.01.01_60/tr_1023970501v010101p.pdf
|
The Parlay X Web Services provide powerful yet simple, highly abstracted, imaginative, telecommunications functions that application developers and the IT community can both quickly comprehend and use to generate new, innovative applications. The Open Service Access (OSA) specifications define an architecture that enables application developers to make use of network functionality through an open standardized interface, i.e. the Parlay/OSA APIs. The present document is part 5, sub-part 1, of an informative mapping of Parlay X Web Services to Parlay/OSA APIs. The present document specifies the mapping of the Parlay X Multimedia Messaging Web Service to the Parlay/OSA User Interaction Service Capability Feature (SCF).
|
102 397-4-2
|
Open Service Access (OSA); Mapping of Parlay X Web Services to Parlay/OSA APIs; Part 4: Short Messaging Mapping; Sub-part 2: Mapping to Multi-Media Messaging
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102300_102399/1023970402/01.01.01_60/tr_1023970402v010101p.pdf
|
The Parlay X Web Services provide powerful yet simple, highly abstracted, imaginative, telecommunications functions that application developers and the IT community can both quickly comprehend and use to generate new, innovative applications. The Open Service Access (OSA) specifications define an architecture that enables application developers to make use of network functionality through an open standardized interface, i.e. the Parlay/OSA APIs. The present document is part 4, sub-part 2, of an informative mapping of Parlay X Web Services to Parlay/OSA APIs. The present document specifies the mapping of the Parlay X Short Messaging Web Service to the Parlay/OSA Multi-Media Messaging Service Capability Feature (SCF).
|
102 397-4-1
|
Open Service Access (OSA); Mapping of Parlay X Web Services to Parlay/OSA APIs; Part 4: Short Messaging Mapping; Sub-part 1: Mapping to User Interaction
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102300_102399/1023970401/01.01.01_60/tr_1023970401v010101p.pdf
|
The Parlay X Web Services provide powerful yet simple, highly abstracted, imaginative, telecommunications functions that application developers and the IT community can both quickly comprehend and use to generate new, innovative applications. The Open Service Access (OSA) specifications define an architecture that enables application developers to make use of network functionality through an open standardized interface, i.e. the Parlay/OSA APIs. The present document is part 4, sub-part 1, of an informative mapping of Parlay X Web Services to Parlay/OSA APIs. The present document specifies the mapping of the Parlay X Short Messaging Web Service to the Parlay/OSA User Interaction Service Capability Feature (SCF).
|
102 397-3-2
|
Open Service Access (OSA); Mapping of Parlay X Web Services to Parlay/OSA APIs; Part 3: Call Notification Mapping; Sub-part 2: Mapping to Multi-Party Call Control
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102300_102399/1023970302/01.01.01_60/tr_1023970302v010101p.pdf
|
The present document specifies the mapping of the Parlay X Call Notification Web Service to the Parlay/OSA Multi-Party Call Control Service Capability Feature (SCF). The Parlay X Web Services provide powerful yet simple, highly abstracted, imaginative, telecommunications functions that application developers and the IT community can both quickly comprehend and use to generate new, innovative applications. The Open Service Access (OSA) specifications define an architecture that enables application developers to make use of network functionality through an open standardized interface, i.e. the Parlay/OSA APIs.
|
102 397-3-1
|
Open Service Access (OSA); Mapping of Parlay X Web Services to Parlay/OSA APIs; Part 3: Call Notification Mapping; Sub-part 1: Mapping to Generic Call Control
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102300_102399/1023970301/01.01.01_60/tr_1023970301v010101p.pdf
|
The present document specifies the mapping of the Parlay X Call Notification Web Service to the Parlay/OSA Generic Call Control Service Capability Feature (SCF). The Parlay X Web Services provide powerful yet simple, highly abstracted, imaginative, telecommunications functions that application developers and the IT community can both quickly comprehend and use to generate new, innovative applications. The Open Service Access (OSA) specifications define an architecture that enables application developers to make use of network functionality through an open standardized interface, i.e. the Parlay/OSA APIs.
|
102 397-2-2
|
Open Service Access (OSA); Mapping of Parlay X Web Services to Parlay/OSA APIs; Part 2: Third Party Call Mapping; Sub-part 2: Mapping to Multi-party Call Control
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102300_102399/1023970202/01.01.01_60/tr_1023970202v010101p.pdf
|
The Parlay X Web Services provide powerful yet simple, highly abstracted, imaginative, telecommunications functions that application developers and the IT community can both quickly comprehend and use to generate new, innovative applications. The Open Service Access (OSA) specifications define an architecture that enables application developers to make use of network functionality through an open standardized interface, i.e. the Parlay/OSA APIs. The present document specifies the mapping of the Parlay X Third Party Call Web Service to the Parlay/OSA Multi- Party Call Control Service Capability Feature (SCF).
|
102 397-2-1
|
Open Service Access (OSA); Mapping of Parlay X Web Services to Parlay/OSA APIs; Part 2: Third Party Call Mapping; Sub-part 1: Mapping to generic control
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102300_102399/1023970201/01.01.01_60/tr_1023970201v010101p.pdf
|
The Parlay X Web Services provide powerful yet simple, highly abstracted, imaginative, telecommunications functions that application developers and the IT community can both quickly comprehend and use to generate new, innovative applications. The Open Service Access (OSA) specifications define an architecture that enables application developers to make use of network functionality through an open standardized interface, i.e. the Parlay/OSA APIs. The present document specifies the mapping of the Parlay X Third Party Call Web Service to the Parlay/OSA Generic Call Control Service Capability Feature (SCF).
|
102 397-1
|
Open Service Access (OSA); Mapping of Parlay X Web Services to Parlay/OSA APIs; Part 1: Common Mapping
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102300_102399/10239701/01.01.01_60/tr_10239701v010101p.pdf
|
The Parlay X Web Services provide powerful yet simple, highly abstracted, imaginative, telecommunications functions that application developers and the IT community can both quickly comprehend and use to generate new, innovative applications. The Open Service Access (OSA) specifications define an architecture that enables application developers to make use of network functionality through an open standardized interface, i.e. the Parlay/OSA APIs. The present document specifies the mapping of the Parlay X Common Data to the Parlay/OSA Common Data Definitions.
|
102 395-2
|
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); European Air Traffic Management Network (EATMN); Part 2: Work programme
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102300_102399/10239502/01.01.01_60/tr_10239502v010101p.pdf
|
The present document is based on the findings of the previous task of STF 293. These have been laid down in TR 102 395-1 [2]. For the work items outlined in above reference, which are potential Community Standards (CSs) requiring European Norms (ENs) to implement Mandate M/354, the present document will develop proposals based on the urgency of need and maturity of the candidate CSs as was previously defined. In a next step the present document will identify the scope of work for the candidate CSs and propose time schedules for the development of standards. Estimates on the efforts required for the individual candidate CSs will be based on the documented accomplishments achieved by various expert bodies (mainly ICAO, EUROCAE and EUROCONTROL) and also consider the status of work which is currently ongoing. Last not least the present document will include Gantt diagrams outlining a sequence of activities for carrying out the standardization processes based on the preliminary priorities appointed by the stakeholders. To this end it will outline the typical ETSI standardization process with its predefined schedules as this is one major parameter delimiting the potential schedules (see also annex A). The other most critical constraint which will limit the amount of realistically achievable results is the availability of the essential experts. Therefore, the document will make an attempt to indicate which specific expertise will be required to attain the scope and the expected results of each candidate CSs. Based on the above it will provide best practise estimates on the efforts required based on experience gained with similar standardization matters. It will also make an effort to "de-conflict" the working processes in such a way that the resources (limited number of experts) will not be overloaded but at the same time trying to ensure that the results will be available when needed. The aim of this Work Programme is to facilitate the process of the selection of the candidate CSs which will actually enter the standardization process. This effort rests with the SES Programme authorities and comprises setting the priorities, determining the schedules and resources for the realization. ETSI ETSI TR 102 395-2 V1.1.1 (2005-12) 7
|
102 395-1
|
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); European Air Traffic Management Network (EATMN); Part 1: Inventory of existing standards and specifications in progress
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102300_102399/10239501/01.01.01_60/tr_10239501v010101p.pdf
|
On 30 June 2004, the European Commission issued mandate M/354 [1] to CEN/CENELEC/ETSI for the development of European Standards for interoperability of the European Air Traffic Management Network (EATMN). The description of the mandated work is: • CEN/CENELEC/ETSI are asked to produce standards that satisfy the essential requirements and/or implementing rules of the interoperability Regulation for systems, together with the relevant procedures, or constituents provided for in the annexes (see [1]). • CEN/CENELEC/ETSI are asked to produce an assessment of the compliance of the standards with the general and specific essential requirements laid down in Annex II, Parts A and B of the interoperability Regulation [2] and with the relevant implementing rules. The purpose of the present document is to present an inventory of all CNS/ATM system elements and their constituents which may need standardization to enable the development and implementation of the SES programme. Suitable documentation which might facilitate the definition of such standards and related organizations possessing specific know-how and previously involved in such work were identified. The inventory of the standardization candidates was provided with the recommended priorities specified by the SES ICB. The present document presents Community Specifications proposed as candidates for development either by the European standardization organizations in cooperation with EUROCAE, or by EUROCONTROL, depending on the provisions of Article 4, paragraph 1 of the SES Interoperability Regulation [2]. The European Commission tasked STF 293 to produce a comprehensive inventory of the current status of achieved standardization, on-going work, and open issues thus giving an overview on the rather wide domain of CNS/ATM. Part two of STF 293's task is the creation of a work plan outlining the duration, manpower and estimated efforts to produce the resulting Community Specifications. The final judgement of allocating priorities to the work plan and initiating the required activities rests with the European Commission. It is proposed that this work plan be categorized dealing with the issues in the following sequence: • CSs to be developed from March 2006 onwards (clause 5). • CSs to be developed from 2007 onwards (clause 6). • CSs whose development should start 2008 and later (especially taking into account the outcome of the SESAME definition phase) (clause 7). Additionally clause 8 describes a group of systems for which there usually exists a broad current experience to install and operate such systems based on international standards and national regulatory approval AND where are serious doubts that a development of CSs is economically reasonable e.g. seeing the very limited numbers of new installations expected (sometimes even phase out strategies are under consideration). List of systems for Air Navigation Services According to REGULATION (EC) No 552/2004; Annex I the EATMN is subdivided into eight systems [2]. 1) Systems and procedures for airspace management. 2) Systems and procedures for air traffic flow management. 3) Systems and procedures for air traffic services, in particular flight data processing systems, surveillance data processing systems and human-machine interface systems. 4) Communications systems and procedures for ground-to-ground, air-to-ground and air-to-air communications. 5) Navigation systems and procedures. 6) Surveillance systems and procedures. 7) Systems and procedures for aeronautical information services. ETSI ETSI TR 102 395-1 V1.1.1 (2005-12) 20 8) Systems and procedures for the use of meteorological information.
|
102 390
|
Transmission and Multiplexing (TM); Access networks; Requirements for the support of Voice over DSL
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102300_102399/102390/01.01.01_60/tr_102390v010101p.pdf
|
The present document specifies, from a European perspective, general AN functional requirements, in terms of transport means for signalling and voice channels, timing/synchronization, delay and BER performances, distribution of the relevant functions over AN elements and management, for in-band support of Voice and NB data communications over DSL systems. It is structured in the form of a supplement to the DSL Forum's TR-039 [1].
|
102 378
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Equipment for identification and location systems; System Reference Document for inductive systems for industrial applications operating in the frequency range from 400 kHz to 600 kHz
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102300_102399/102378/01.01.01_60/tr_102378v010101p.pdf
|
The present document provides information on RFID systems including applications, technical parameters, and radio spectrum requirements for RFID equipment operating in the MF frequency band from 400 kHz to 600 kHz. The scope is limited to RFID systems for industrial applications. Most of the applications are in indoor installations. The RFID systems use inductive SRD technology covered by the harmonized standard, EN 300 330-2 [2]. Additional information is given in the following annexes: • annex A: detailed market and application information; • annex B: technical information; • annex C: expected compatibility issues.
|
102 377
|
Digital Video Broadcasting (DVB); DVB-H Implementation Guidelines
|
TR
|
1.4.1
|
http://www.etsi.org/deliver/etsi_tr/102300_102399/102377/01.04.01_60/tr_102377v010401p.pdf
|
The present document provides guidelines for the use and implementation of ETSI Digital Video Broadcasting Handheld (DVB-H) standard [i.2] in the context of providing an efficient way of carrying multimedia services over digital terrestrial broadcasting networks to handheld terminals. The document should be read in conjunction with the DVB-T Implementation Guidelines (TR 101 190 [i.5]) since many transmission aspects and network topologies (e.g. Single Frequency Networks and Multi-Frequency Networks) are not described in detail in the present document because DVB-H is built upon DVB-T. Objective - The present document describes the Digital Video Broadcasting Handheld (DVB-H) specification for digital terrestrial TV broadcasting to handheld portable/mobile terminals. It draws attention to the technical questions that need to be answered when setting up DVB-H services and networks plus it offers some guidance in finding answers to them. It does not cover in detail, issues linked to the content of the broadcasts such as Coding Formats, Electronic Programme Guides (EPG), Access Control (CA), etc. Target readers - The present document is aimed at the Technical Departments of broadcasting organizations that are considering implementing digital terrestrial broadcasting to handheld devices. It assumes that readers are familiar with digital terrestrial broadcasting networks. Contributors - The present document was prepared by members of the Ad-hoc group TM-H from the DVB Project. Members include broadcasters, network operators and professional and domestic equipment manufacturers.
|
102 376-2
|
Digital Video Broadcasting (DVB); Implementation guidelines for the second generation system for Broadcasting, Interactive Services, News Gathering and other broadband satellite applications; Part 2: S2 Extensions (DVB-S2X)
|
TR
|
1.2.1
|
http://www.etsi.org/deliver/etsi_tr/102300_102399/10237602/01.02.01_60/tr_10237602v010201p.pdf
|
The present document gives an overview of the technical and operational issues relevant to the system specified in ETSI EN 302 307-2 [i.2], and is intended to provide guidance to broadcasters and operators considering the adoption of DVB-S2X. It is assumed a reasonable familiarity with the original DVB-S2 standard ETSI EN 302 307-1 [i.1], whose technical and operational issues are described in details in ETSI TR 102 376-1 [i.3]. It can also be considered as a useful guideline for implementation of DVB-S2, when enhanced DVB-S2 receivers and channel models are applicable. The present document also includes guidelines for the implementations of the amendments to the standard to enable beam hopping operation.
|
102 376-1
|
Digital Video Broadcasting (DVB); Implementation guidelines for the second generation system for Broadcasting, Interactive Services, News Gathering and other broadband satellite applications; Part 1: DVB-S2
|
TR
|
1.2.1
|
http://www.etsi.org/deliver/etsi_tr/102300_102399/10237601/01.02.01_60/tr_10237601v010201p.pdf
|
The present document is part 1 of a multipart deliverable and gives an overview of the technical and operational issues relevant to the system specified in ETSI EN 302 307-1 [i.2], including service quality and link availability evaluation for typical DSNG and fixed contribution links, with the purpose to facilitate its interpretation. Correspondingly, ETSI TR 102 376-2 [i.45] considers technical and operational issues relevant to the system specified in ETSI EN 302 307-2 [i.44], but it can be applied also to DVB-S2, when enhanced S2 receivers and channel models are implemented.
|
102 376
|
Digital Video Broadcasting (DVB) User guidelines for the second generation system for Broadcasting, Interactive Services, News Gathering and other broadband satellite applications (DVB-S2)
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102300_102399/102376/01.01.01_60/tr_102376v010101p.pdf
|
The present document gives an overview of the technical and operational issues relevant to the system specified in EN 302 307 [2] "Digital Video Broadcasting (DVB): Second generation framing structure, channel coding and modulation systems for Broadcasting, Interactive Services, News Gathering and other broadband satellite applications", including service quality and link availability evaluation for typical DSNG and fixed contribution links, with the purpose to facilitate its interpretation.
|
102 324
|
PowerLine Telecommunciations (PLT); Radiated emissions' characteristics and measurement method of state of the art powerline communication networks
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102300_102399/102324/01.01.01_60/tr_102324v010101p.pdf
|
The present document describes the radiated emissions' characteristics, and associated method of measurements, of state of the art powerline communication networks as defined in clause 3. The present document reports the radiated emissions' characteristics of powerline communication networks in the frequency range 1,605 MHz to 30 MHz. The radiated emissions' characteristics presented in the present document cover both access and in-home powerline communication networks.
|
102 370
|
PowerLine Telecommunications (PLT); Basic data relating to LVDN measurements in the 3 MHz to 100 MHz frequency range
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102300_102399/102370/01.01.01_60/tr_102370v010101p.pdf
|
The present document describes the equipment and results of the measurement campaign in the 3 MHz to 100 MHz frequency range and is a supplement to TR 102 270 [2] and TR 102 269 [3].
|
102 365
|
Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Application Programming Interface (API) definition for the UDP/IP based testing of HIPERLAN Type 2 protocol prototypes
|
TR
|
1.2.1
|
http://www.etsi.org/deliver/etsi_tr/102300_102399/102365/01.02.01_60/tr_102365v010201p.pdf
|
The present document presents the results of work to develop a generic solution for inexpensively testing any protocol and a specific implementation of this solution for the HIPERLAN2 DLC protocol. The generic solution provides an inexpensive means to test any protocol implementation. The implementation is software-based but can be hardware as well. The implementation in software on a PC-based platform is a "virtual" test system. The implementation in hardware with radio transport and frequency capabilities is classic radio-based test equipment.
|
102 356
|
Speech Processing, Transmission and Quality Aspects (STQ); Application and enhancements of the E-Model (ETR 250); Overview of available documentation and ongoing work
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102300_102399/102356/01.01.01_60/tr_102356v010101p.pdf
|
The present document provides an overview of the application and enhancements of the E-Model taking place in various standardization bodies; in addition it points to the most recent version of the E-Model.
|
102 353
|
Satellite Earth Stations and Systems (SES); Broadband Satellite Multimedia (BSM); Guidelines for the Satellite Independent Service Access Point (SI-SAP)
|
TR
|
1.2.1
|
http://www.etsi.org/deliver/etsi_tr/102300_102399/102353/01.02.01_60/tr_102353v010201p.pdf
|
The present document provides a guide to the underlying models and assumptions that have been used to specify the BSM Satellite Independent Service Access Point (SI-SAP) interface.
|
102 348
|
Using CSTA for SIP Phone User Agents (uaCSTA)
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102300_102399/102348/01.01.01_60/tr_102348v010101p.pdf
|
The Session Initiation Protocol (SIP) is a control (signalling) protocol for creating, modifying, and terminating sessions with one or more participants. These sessions include Internet telephone calls, multimedia distribution, and multimedia conferences. CSTA standardizes a very powerful and flexible set of application services to observe and control voice and non-voice media calls as well as control and observe non-call related features. This Ecma Technical Report describes how CSTA can be used to provide a subset of CSTA call control functionality, called 1st party call control, for SIP user agents. The term uaCSTA (for user agent CSTA) refers to transporting ECMA-323 (CSTA XML) messages over a SIP session. uaCSTA leverages SIP mechanisms to provide a highly featured, robust, and extensible set of features to support applications in the Enterprise environment. uaCSTA can be implemented by several different types of SIP user agents: • directly by a SIP user agent on a SIP phone. • uaCSTA can also be implemented by a SIP B2BUA to augment 3PCC functionality. • by a proxy server that is front-ending a PBX.
|
102 347
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Equipment for Detecting Movement; Radio equipment operating around e.g. 5,8 GHz, 10 GHz, 25 GHz, 61 GHz, 77 GHz; System Reference Document for Tank Level Probing Radar (TLPR)
|
TR
|
1.1.2
|
http://www.etsi.org/deliver/etsi_tr/102300_102399/102347/01.01.02_60/tr_102347v010102p.pdf
|
The present document provides information on the intended applications, the technical parameters and the radio spectrum requirements for TLPR based on e.g. pulse RF or FMCW, operating specifically in the frequency bands: • 4,5 GHz to 7 GHz; • 8,5 GHz to 11,5 GHz; • 24,05 GHz to 27 GHz; • 57 GHz to 64 GHz; • and 75 GHz to 85 GHz. The present document describes pulse RF and FMCW systems that are used in tank level measurement applications. The scope is limited to radars operated as short range devices (because of their commercial usage and design), in which the TLPR is installed in closed (not open) metallic tanks or reinforced concrete tanks, or similar enclosure structures made of comparable attenuating material, holding a substance, liquid or powder, whose level is a variable. It does not include any radar systems in applications where they would be operated outside closed (not open) metallic tank or reinforced concrete tank, or similar enclosure structure made of comparable attenuating material. The radar applications in the present document are not intended for communications purposes. Their intended usage excludes any intended radiation into free space which sets it apart from any type of communications equipment. Additional information is given in the following annexes: • annex A: Detailed market information; • annex B: Technical information; • annex C: Expected compatibility issues.
|
102 343
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Ultra Low Power Active Medical Implants (ULP-AMI) operating in the 401 MHz to 402 MHz and 405 MHz to 406 MHz bands; System Reference Document
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102300_102399/102343/01.01.01_60/tr_102343v010101p.pdf
|
The present document defines the requirements for radio frequency spectrum usage for ULP-AMI active medical implants and peripherals operating in the 401 MHz to 402 MHz and 405 MHz to 406 MHz frequency bands. It further defines the technical characteristics of these devices and proposes interference mitigation technologies to avoid interference to and from primary users (meteorological aids) and other medical wireless applications, to ensure reliable communication links. It includes necessary information to support the co-operation between ETSI and the Electronic Communications Committee (ECC) of the European Conference of Post and Telecommunications Administrations (CEPT), including: • Detailed market information (annex A); • Technical information (annex B); • Expected compatibility issues (annex C).
|
102 341
|
Access and Terminals (AT); Short Message Service (SMS) for PSTN/ISDN; Control Strings (service codes) for SMS functions and SMS supplementary services
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102300_102399/102341/01.01.01_60/tr_102341v010101p.pdf
|
The present document defines the control strings (service codes) for functions and supplementary services defined in the service description of the Short Message Service (SMS). These SMS control strings can be used between a Short Message Terminal Equipment (SM-TE) and a Short Message Service Centre (SM-SC) to control both the SMS functions and the optional SMS supplementary services. These SMS control strings can be used via ISDN and PSTN accesses as well as for the User Based Solution (UBS) and Network Based Solution (NBS). The present document describes the method to implement SMS control strings only. Other SM-SC based methods may be possible. The present document includes information applicable to service providers (SM-SC) and terminal equipment (SM-TE) manufacturers. The present document describes only the SMS control strings to control the according functions and supplementary services in the SM-SC; any charging principles of those services are outside the scope of the present document. There are no interactions relevant with telephony supplementary services. Furthermore, conformance to the present document is met by conforming to the appropriate information sent and received by the SM-TE and the SM-SC. Therefore no method of testing is provided for the present document.
|
102 308
|
User Group; User interoperability criteria
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102300_102399/102308/01.01.01_60/tr_102308v010101p.pdf
|
In the current fast evolving telecommunications world, where various technologies are competing, interoperability is more than ever a fundamental feature that users expect from standardization and every effort is required to ensure it across networks and services. Despite significant standardization efforts, the user experience has shown in several occasions that interoperability is not provided end-to-end as anticipated. It is important to notice that any interoperability failure in public service area might jeopardize people safety and even possibly their life. Therefore it is crucial that interoperability is ensured in this field as widely as possible and that conditions, if any, where the service is not provided, are made clear to everybody. Nevertheless users, considering the growing complexity of telecommunication technology and the legitimate need of freedom for innovation, understand that it is not possible to make everything conforming to a single standard. Taking into account this limitation, they would like to have, when purchasing devices or services, at least a clear indication on how far interoperability is provided. The scope of the present document encompasses the main ICT services, e.g. fixed and mobile telephony basic and supplementary services, directory services, data transmission, Internet access, email, etc. The present document endeavours to give principles enabling for interoperability management in the standardization process according to the users' needs. Such principles are expected to help in identifying areas where users need interoperability and where standardization should allow to provide it. The intention was to include the needs of every kind of users but unfortunately and despite many efforts, inputs about the needs of elderly and disable were very difficult to capture and only a few ones were provided belatedly. Therefore an additional work would be needed to fully take into account such needs.
|
102 335-2
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); System reference document for harmonized use of Digital Mobile Radio (DMR); Part 2: Systems operating under individual licences in the existing land mobile service spectrum bands
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102300_102399/10233502/01.01.01_60/tr_10233502v010101p.pdf
|
The present document contains functional requirements for individually licensed Digital Mobile Radio (DMR) operating in the existing licensed land mobile service frequency bands as identified in CEPT ECC/DEC/(02)03 [2] and T/R 25-08 [3]. It also proposes terms to facilitate sharing these bands with existing land mobile services and describes expected market information and compatibility issues. The primary market to be addressed is that served by current land mobile services. This market is considered to fall into three basic tiers of usage. Other standards already exist that provide more sophisticated suites of services and facilities than are proposed to be supported by DMR. In the present document the segments considered are: • Tier 2: For the professional market offering peer-to-peer mode and repeater mode (expected to be licensed); • Tier 3: Trunked or Simulcast operation (expected to be licensed). The tier 1 usage is covered in part 1 of TR 102 335 [9]. It is to note that tier 2 products can also encompass simulcast as well as non-simulcast usage. The present document describes a protocol that has been specifically developed with the intention of being suitable for all identified market tiers. Specifically, in this case for use in the existing land mobile service bands with the intention of causing minimum change to the spectrum planning and regulations. Thus the proposed DMR protocol is intended to be applicable to the current bands, channel raster, range assumptions and all other spectrum parameters without need for change. The protocol also supports significant feature and facility enhancements, which are believed to be necessary to enable the future users to obtain the most benefit from the DMR service. This is detailed further in annex B. It includes necessary information to support the co-operation between ETSI and the Electronic Communications Committee (ECC) of the European Conference of Post and Telecommunications administrations (CEPT), including: • Market information (annex A); • Technical information (annex B); • Expected compatibility issues (annex C).
|
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.