hash
stringlengths 32
32
| doc_id
stringlengths 5
12
| section
stringlengths 4
1.47k
| content
stringlengths 0
6.67M
|
|---|---|---|---|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.7.1.4 Method of test
|
Specific PICS statements
-
PIXIT statements
-
Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in MM-state "idle, updated" with valid TMSI and CKSN.
The MS is brought into the state U11 by using table 26.8.1.2/3.
Foreseen final state of the MS
U19, release request.
Maximum duration of test
30 s.
Test procedure
An MO circuit switched basic service is selected that is supported by the MS; if the MS supports MO telephony, the selected basic service is telephony. If necessary, the MS is configured for that basic service. Then, the MS is made to initiate a call. The CC entity of the MS is brought to the state U11. The SS sends a DISCONNECT message to the MS. The MS shall respond with a RELEASE message. The SS checks by using the status enquiry procedure that the CC entity of the MS has entered the state U19, release request.
Expected sequence
Step
Direction
Message
Comments
1
SS -> MS
DISCONNECT
2
MS -> SS
RELEASE
3
SS -> MS
STATUS ENQUIRY
4
MS -> SS
STATUS
cause 30#, state U19
Specific message contents:
None.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.7.2 U11 disconnect request / RELEASE received
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.7.2.1 Definition
|
The call control entity of the MS being in the state, U11, a RELEASE message is received by the MS. This test is applicable for any equipment supporting at least one mobile originated circuit switched basic service.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.7.2.2 Conformance requirement
|
1) A CC-entity of the MS in CC-state U11, "Disconnect Request", upon receipt of the RELEASE message shall return RELEASE COMPLETE and enter the CC-state U0, "Null".
2) On returning to the idle mode the MS shall release the MM-connection and the CC-entities relating to the seven mobile originating transaction identifiers shall be in CC-state U0, "Null".
References
Conformance requirement 1: 3GPP TS 04.08 / 3GPP TS 24.008 subclause 5.4.3.
Conformance requirement 2: 3GPP TS 04.08 / 3GPP TS 24.008 subclauses 4.5.3, 5.5.3.2 and 8.3.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.7.2.3 Test purpose
|
1) To verify that the a CC-entity of the MS in CC-state U11, "Disconnect Request", upon receipt of the RELEASE message shall return RELEASE COMPLETE and enter the CC-state U0, "Null".
2) To verify that the MS on returning to the idle mode releases the MM-connection and that the CC-entities relating to the seven mobile originating transaction identifiers are in CC-state U0, "Null".
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.7.2.4 Method of test
|
Specific PICS statements
-
PIXIT statements
-
Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in MM-state "idle, updated" with valid TMSI and CKSN.
The MS is brought into the state U11 by using table 26.8.1.2/3.
Foreseen final state of the MS
U0, null.
Maximum duration of test
1 min 30 s.
Test procedure
An MO circuit switched basic service is selected that is supported by the MS; if the MS supports MO telephony, the selected basic service is telephony. If necessary, the MS is configured for that basic service. Then, the MS is made to initiate a call. The CC entity of the MS is brought to the state U11. The SS sends a RELEASE message to the MS. The MS shall respond with a RELEASE COMPLETE message. The SS checks by using the status enquiry procedure that the CC entity has entered the state U0 with all the relevant transaction identifiers.
Expected sequence
Step
Direction
Message
Comments
1
SS -> MS
RELEASE
2
MS -> SS
RELEASE COMPLETE
3
SS -> MS
STATUS ENQUIRY
4
MS -> SS
RELEASE COMPLETE
cause 81# (invalid TI value)
5
SS
repeat steps 3‑4 to cover all the transaction identifiers from 000...110
6
SS -> MS
CHANNEL RELEASE
the main signalling link shall be released by the MS (L2: DISC/UA).
Specific message contents:
None.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.7.3 U11 disconnect request / timer T305 time-out
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.7.3.1 Definition
|
The call control entity of the MS being in the state, U11, if no response is then received from the SS, timer T305 expires at the MS side. This test is applicable for any equipment supporting at least one mobile originated circuit switched basic service.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.7.3.2 Conformance requirement
|
1) A CC-entity of the MS in CC-state U11, "Disconnect Request" shall on expiry of T305, proceed with the connection release procedure by sending the RELEASE message to its peer entity and shall enter the CC-state U19, "Release Request".
References
3GPP TS 04.08 / 3GPP TS 24.008 subclauses 5.4.3 and 11.3.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.7.3.3 Test purpose
|
To verify that the CC-entity of the MS in CC-state U11, "Disconnect Request" shall on expiry of T305 (accuracy ±10 %), proceed with the connection release procedure by sending the RELEASE message to its peer entity and enters the CC-state U19, "Release Request".
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.7.3.4 Method of test
|
Specific PICS statements
-
PIXIT statements
-
Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in MM-state "idle, updated" with valid TMSI and CKSN.
The MS is brought into the state U11 by using table 26.8.1.2/3.
Foreseen final state of the MS
U19, release request.
Maximum duration of test
1 minute.
Test procedure
An MO circuit switched basic service is selected that is supported by the MS; if the MS supports MO telephony, the selected basic service is telephony. If necessary, the MS is configured for that basic service. Then, the MS is made to initiate a call. The CC entity of the MS is brought to the state U11. Then T305 expires at the MS and the MS shall send a RELEASE message. The SS checks timer T305 accuracy and that the CC entity has entered the state U19, release request.
Expected sequence
Step
Direction
Message
Comments
1
SS
SS waits until T305 expires at the MS
2
MS -> SS
RELEASE
SS checks the time between DISCONNECT and RELEASE (note), (T305 ± 10 %)
3
SS -> MS
STATUS ENQUIRY
4
MS -> SS
STATUS
cause 30#, state U19
Specific message contents:
NOTE: With the same cause value as originally contained in the DISCONNECT message. An additional cause information element (#102 recovery on timer expiry) may be included.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.7.4 U11 disconnect request / lower layer failure
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.7.4.1 Definition
|
The call control entity of the MS being in the state, U11, a lower layer failure is accomplished at the MS and consequently, communication at layer 3 level with the peer entity is terminated. This test is applicable for any equipment supporting at least one mobile originated circuit switched basic service.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.7.4.2 Conformance requirement
|
1) A CC-entity of the MS in CC-state U11, "Disconnect Request" having detected a lower layer failure shall return to the idle mode. The CC entities relating to the seven mobile originating transaction identifiers shall be in state U0, "Null".
References
3GPP TS 04.08 / 3GPP TS 24.008 subclauses 4.5.2.3, 4.5.3, 5.5.3.2 and 8.3.
3GPP TS 04.08 / 3GPP TS 44.018 subclause 3.4.13.2.1.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.7.4.3 Test purpose
|
To verify that the a CC-entity of the MS in CC-state U11, "Disconnect Request" having detected a lower layer failure returns to the idle mode. The CC entities relating to the seven mobile originating transaction identifiers are thus in state U0, "Null".
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.7.4.4 Method of test
|
Specific PICS statements
-
PIXIT statements
-
Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in MM-state "idle, updated" with valid TMSI and CKSN.
The MS is brought into the state U11 by using table 26.8.1.2/4.
Foreseen final state of the MS
U0, null.
Maximum duration of test
1 minute 30 s.
Test procedure
An MO circuit switched basic service is selected that is supported by the MS; if the MS supports MO telephony, the selected basic service is telephony. If necessary, the MS is configured for that basic service. Then, the MS is made to initiate a call. The MS is brought to the state U11. The SS generates a lower layer failure at the MS. The SS waits long enough to enable the MS to return to idle state listening to paging, and then pages MS to create RR-connection. Finally, the SS will check the state of the MS by using STATUS ENQUIRY with the relevant transaction identifiers.
Expected sequence
Step
Direction
Message
Comments
1
SS
SS generates lower layer failure
2
SS
SS waits 20 s for the MS to return to listening to paging
3
SS -> MS
PAGING REQUEST
4
MS -> SS
CHANNEL REQUEST
5
SS -> MS
IMMEDIATE ASSIGNMENT
6
MS -> SS
PAGING RESPONSE
7
SS -> MS
STATUS ENQUIRY
8
MS -> SS
RELEASE COMPLETE
cause 81# (invalid TI value)
9
SS
repeat steps 7‑8 to cover all the transaction identifiers from 000...110
10
SS -> MS
CHANNEL RELEASE
the main signalling link shall be released by the MS (L2: DISC/UA).
Specific message contents:
None.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.7.5 U11 disconnect request / unknown message received
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.7.5.1 Definition
|
The call control entity of the MS being in the state, U11, an unknown message is received by the MS. This test is applicable for any equipment supporting at least one mobile originated circuit switched basic service.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.7.5.2 Conformance requirement
|
1) A CC-entity of the MS in CC-state U11, "disconnect request", having received an unknown message from its peer entity shall return a STATUS message.
References
3GPP TS 04.08 / 3GPP TS 24.008 subclause 8.4.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.7.5.3 Test purpose
|
To verify that a CC-entity of the MS in CC-state U11, "disconnect request", having received an unknown message from its peer entity returns a STATUS message.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.7.5.4 Method of test
|
Specific PICS statements
-
PIXIT statements
-
Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in MM-state "idle, updated" with valid TMSI and CKSN.
The MS is brought into the state U11 by using table 26.8.1.2/4.
Foreseen final state of the MS
U11, disconnect request.
Maximum duration of test
30 s.
Test procedure
An MO circuit switched basic service is selected that is supported by the MS; if the MS supports MO telephony, the selected basic service is telephony. If necessary, the MS is configured for that basic service. Then, the MS is made to initiate a call. The CC entity of the MS is brought to the state U11. The SS sends a message with message type not defined for the protocol discriminator to the MS. The MS shall respond with a STATUS message, and finally the SS checks by using the status enquiry procedure that the state of the CC entity has remained unchanged.
Expected sequence
Step
Direction
Message
Comments
1
SS -> MS
unknown message
message type not defined for PD
2
MS -> SS
STATUS
cause 97#, state U11
3
SS -> MS
STATUS ENQUIRY
4
MS -> SS
STATUS
cause 30#, state U11
Specific message contents:
None.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.8 U12 disconnect indication
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.8.1 U12 disconnect indication / call releasing requested by the user
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.8.1.1 Definition
|
The call control entity of the MS being in the state, U12, the user requests to terminate the call. This test is applicable only for mobile stations supporting bearer capability for speech.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.8.1.2 Conformance requirement
|
1) A CC-entity of the MS in CC-state U12, "Disconnect Indication" being in network initiated call release phase, shall, upon receiving a call release request from the user send a RELEASE to its peer entity and enter CC-state U19, "Release Request".
References
3GPP TS 04.07 / 3GPP TS 24.007 subclause 6.2.2,
3GPP TS 04.08 / 3GPP TS 24.008 subclause 5.4.4.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.8.1.3 Test purpose
|
To verify that a CC-entity of the MS in CC-state U12, "Disconnect Indication" being in network initiated call release phase, shall, upon receiving a call release request from the user sends a RELEASE to its peer entity and enters CC-state U19, "Release Request"
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.8.1.4 Method of test
|
Specific PICS statements
-
PIXIT statements
-
Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in MM-state "idle, updated" with valid TMSI and CKSN.
The MS is brought into the state U12 by using Option A of table 26.8.1.2/1.
Foreseen final state of the MS
U19, release request.
Maximum duration of test
30 s.
Test procedure
An MO circuit switched basic service is selected that is supported by the MS; if the MS supports MO telephony, the selected basic service is telephony. If necessary, the MS is configured for that basic service. Then, the MS is made to initiate a call. The CC entity of the MS is brought to the state U12. The user requests termination of the call. The MS shall send a RELEASE message. The SS checks by using the status enquiry procedure that the CC entity has entered the state U19, release request.
Expected sequence
Step
Direction
Message
Comments
1
MMI action, "on hook"
2
MS -> SS
RELEASE
3
SS -> MS
STATUS ENQUIRY
4
MS -> SS
STATUS
cause 30#, state U19
Specific message contents:
None.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.8.2 U12 disconnect indication / RELEASE received
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.8.2.1 Definition
|
The call control entity of the MS being in the state, U12, a RELEASE message is received by the MS. This test is applicable only for mobile stations supporting bearer capability for speech.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.8.2.2 Conformance requirement
|
1) A CC-entity of the MS in CC-state U12, "Disconnect Indication", upon receipt of a RELEASE message shall return to its peer entity the RELEASE COMPLETE message and enter the CC-state U0, "Null".
2) On returning to the idle mode the MS shall release the MM-connection and the CC-entities relating to the seven mobile originating transaction identifiers shall be in CC-state U0, "Null".
References
Conformance requirement 1: 3GPP TS 04.08 / 3GPP TS 24.008 subclause 5.4.2.
Conformance requirement 2: 3GPP TS 04.08 / 3GPP TS 24.008 subclauses 4.5.3, 5.5.3.2 and 8.3.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.8.2.3 Test purpose
|
1) To verify that a CC-entity of the MS in CC-state U12, "Disconnect Indication", upon receipt of a RELEASE message returns to its peer entity the RELEASE COMPLETE message and enters the CC-state U0, "Null".
2) To verify that the MS on returning to the idle mode releases the MM-connection and that the CC-entities relating to the seven mobile originating transaction identifiers are in CC-state U0, "Null".
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.8.2.4 Method of test
|
Specific PICS statements
-
PIXIT statements
-
Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in MM-state "idle, updated" with valid TMSI and CKSN.
The MS is brought into the state U12 by using Option A of table 26.8.1.2/1.
Foreseen final state of the MS
U0, null.
Maximum duration of test
1 min.
Test procedure
An MO circuit switched basic service is selected that is supported by the MS; if the MS supports MO telephony, the selected basic service is telephony. If necessary, the MS is configured for that basic service. Then, the MS is made to initiate a call. The CC entity of the MS is brought to the state U12. The SS sends a RELEASE message to the MS. The MS shall respond with a RELEASE COMPLETE message. The SS checks by using the status enquiry procedure that the CC entity has entered the state U0 with all the relevant transaction identifiers.
Expected sequence
Step
Direction
Message
Comments
1
SS -> MS
RELEASE
2
MS -> SS
RELEASE COMPLETE
3
SS -> MS
STATUS ENQUIRY
4
MS -> SS
RELEASE COMPLETE
cause 81# (invalid TI value)
5
SS
repeat steps 3‑4 to cover all the transaction identifiers from 000...110
6
SS -> MS
CHANNEL RELEASE
the main signalling link shall be released by the MS (L2: DISC/UA).
Specific message contents:
None.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.8.3 U12 disconnect indication / lower layer failure
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.8.3.1 Definition
|
The call control entity of the MS being in the state, U12, a lower layer failure is accomplished at the MS and consequently, communication at layer 3 level with the peer entity is terminated. This test is applicable only for mobile stations supporting bearer capability for speech.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.8.3.2 Conformance requirement
|
1) A CC-entity of the MS in CC-state U12, "Disconnect Indication" having detected a lower layer failure shall return to idle mode. The CC-entities relating to the seven mobile originating transaction identifiers shall be in state U0, "Null".
References
3GPP TS 04.08 / 3GPP TS 24.008 subclauses 4.5.3.2, 4.5.3, 5.5.3.2, 3.4.13.2.1 and 8.3.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.8.3.3 Test purpose
|
To verify that a CC-entity of the MS in CC-state U12, "Disconnect Indication" having detected a lower layer failure returns to idle mode. The CC-entities relating to the seven mobile originating transaction identifiers are thus in state U0, "Null".
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.8.3.4 Method of test
|
Specific PICS statements
-
PIXIT statements
-
Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in MM-state "idle, updated" with valid TMSI and CKSN.
The MS is brought into the state U12 by using Option A of table 26.8.1.2/2.
Foreseen final state of the MS
U0, null.
Maximum duration of test
1 minute 30 s.
Test procedure
An MO circuit switched basic service is selected that is supported by the MS; if the MS supports MO telephony, the selected basic service is telephony. If necessary, the MS is configured for that basic service. Then, the MS is made to initiate a call. The MS is brought to the state U12. The SS generates a lower layer failure at the MS. The SS waits long enough to enable the MS to return to idle state listening to paging, and then pages MS to create RR-connection. Finally, the SS will check the state of the MS by using STATUS ENQUIRY with the relevant transaction identifiers.
Expected sequence
Step
Direction
Message
Comments
1
SS
SS generates lower layer failure
2
SS
SS waits 20 s for the MS to return to listening to paging
3
SS -> MS
PAGING REQUEST
4
MS -> SS
CHANNEL REQUEST
5
SS -> MS
IMMEDIATE ASSIGNMENT
6
MS -> SS
PAGING RESPONSE
7
SS -> MS
STATUS ENQUIRY
8
MS -> SS
RELEASE COMPLETE
cause 81# (invalid TI value)
9
SS
repeat steps 7‑8 to cover all the transaction identifiers from 000...110
10
SS -> MS
CHANNEL RELEASE
the main signalling link shall be released by the MS (L2: DISC/UA).
Specific message contents:
None.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.8.4 U12 disconnect indication / unknown message received
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.8.4.1 Definition
|
The call control entity of the MS being in the state, U12, an unknown message is received by the MS. This test is applicable only for mobile stations supporting bearer capability for speech.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.8.4.2 Conformance requirement
|
A CC-entity of the MS in CC-state U12, "Disconnect Indication" having received an unknown message from its peer entity shall return a STATUS message.
References
3GPP TS 04.08 / 3GPP TS 24.008 subclause 8.4.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.8.4.3 Test purpose
|
To verify that a CC-entity of the MS in CC-state U12, "Disconnect Indication" having received an unknown message from its peer entity returns a STATUS message.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.8.4.4 Method of test
|
Specific PICS statements
-
PIXIT statements
-
Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in MM-state "idle, updated" with valid TMSI and CKSN.
The MS is brought into the state U12 by using Option A of table 26.8.1.2/3.
Foreseen final state of the MS
U12, disconnect indication.
Maximum duration of test
30 s.
Test procedure
An MO circuit switched basic service is selected that is supported by the MS; if the MS supports MO telephony, the selected basic service is telephony. If necessary, the MS is configured for that basic service. Then, the MS is made to initiate a call. The CC entity of the MS is brought to the state U12. The SS sends a message with message type not defined for the protocol discriminator to the MS. The MS shall respond with a STATUS message, and finally the SS checks by using the status enquiry procedure that the state of the CC entity has remained unchanged.
Expected sequence
Step
Direction
Message
Comments
1
SS -> MS
unknown message
message type not defined for PD
2
MS -> SS
STATUS
cause 97#, state U12
3
SS -> MS
STATUS ENQUIRY
4
MS -> SS
STATUS
cause 30#, state U12
Specific message contents:
None.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.9 Outgoing call / U19 release request
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.9.1 Outgoing call / U19 release request / timer T308 time-out
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.9.1.1 Definition
|
The call control entity of the MS being in the state, U19, if no response is then received from the SS, timer T308 expires at the MS side. This test is applicable for any equipment supporting at least one mobile originated circuit switched basic service.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.9.1.2 Conformance requirement
|
1) A CC-entity of the MS in CC-state U19, "Release Request" will, upon the first expiry of timer T308 send the RELEASE message to its peer entity and remain in the CC-state U19.
References
3GPP TS 04.08 / 3GPP TS 24.008 subclauses 5.4.4.3.1 and 11.3.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.9.1.3 Test purpose
|
To verify that a CC-entity of the MS in CC-state U19, "Release Request" will, upon the first expiry of timer T308 (accuracy ± 10 %) send the RELEASE message to its peer entity and remain in the CC-state U19.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.9.1.4 Method of test
|
Specific PICS statements
-
PIXIT statements
-
Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in MM-state "idle, updated" with valid TMSI and CKSN.
The MS is brought into the state U19 by using table 26.8.1.2/4.
Foreseen final state of the MS
U19, release request.
Maximum duration of test
1 min.
Test procedure
An MO circuit switched basic service is selected that is supported by the MS; if the MS supports MO telephony, the selected basic service is telephony. If necessary, the MS is configured for that basic service. Then, the MS is made to initiate a call. The CC entity of the MS is brought to the state U19. When T308 expires at the MS, the MS shall send a RELEASE message. The SS checks timer T308 accuracy and that the state of the CC entity has remained unchanged.
Expected sequence
Step
Direction
Message
Comments
1
SS
SS waits until T308 at the MS
2
MS -> SS
RELEASE
SS checks the time between the two RELEASE messages (T308 ± 10 %)
3
SS -> MS
STATUS ENQUIRY
4
MS -> SS
STATUS
cause 30#, state U19
Specific message contents:
None.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.9.2 Outgoing call / U19 release request / 2nd timer T308 time-out
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.9.2.1 Definition
|
The call control entity of the MS being in the state, U19, if no response is then received after timer T308 has expired two times in success at the MS. This test is applicable for any equipment supporting at least one mobile originated circuit switched basic service.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.9.2.2 Conformance requirement
|
1) A CC-entity of the MS in CC-state U19, "Release Request", upon the 2nd expiry of the timer T308, shall enter the CC-state U0, "Null".
2) Subsequently the MS shall proceed with releasing the MM-connection and enter the idle mode with the CC entities relating to the seven mobile originating transaction identifiers in state U0, "Null".
References
Conformance requirement 1: 3GPP TS 04.08 / 3GPP TS 24.008 subclauses 5.4.4.3.1 and 11.3.
Conformance requirement 2: 3GPP TS 04.08 / 3GPP TS 24.008 subclauses 4.5.3 and 5.5.3.2.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.9.2.3 Test purpose
|
1) To verify that a CC-entity of the MS in CC-state U19, "Release Request", upon the 2nd expiry of the timer T308, enters the CC-state U0, "Null".
2) To verify that subsequently the MS proceeds with releasing the MM-connection and enters the idle mode with the CC entities relating to the seven mobile originating transaction identifiers in state U0, "Null".
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.9.2.4 Method of test
|
Specific PICS statements
-
PIXIT statements
-
Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in MM-state "idle, updated" with valid TMSI and CKSN.
The MS is brought into the state U19 by using table 26.8.1.2/4.
Foreseen final state of the MS
U0, null.
Maximum duration of test
2 min 30 s.
Test procedure
An MO circuit switched basic service is selected that is supported by the MS; if the MS supports MO telephony, the selected basic service is telephony. If necessary, the MS is configured for that basic service. Then, the MS is made to initiate a call. The CC entity of the MS is brought to the state U19. The SS allows T308 expiry at the MS, and the MS shall repeat sending the RELEASE message and start timer T308 again. The SS allows again T308 expiry at the MS. The MS shall abort the RR-connection (DISC/UA). The SS waits long enough to enable the MS to return to idle state listening to paging, and then pages MS to create RR-connection. Finally, the SS will check the state of the MS by using STATUS ENQUIRY with the relevant transaction identifiers.
Expected sequence
Step
Direction
Message
Comments
1
SS
SS waits until T308 expiry at the MS
2
MS -> SS
RELEASE
3
SS -> MS
STATUS ENQUIRY
4
MS -> SS
STATUS
cause 30#, state U19
5
SS
SS waits until the second T308 expiry at the MS
6
SS
SS waits T3240 expiry at the MS
7
MS
the main signalling link shall be released by the MS (L2: DISC/UA).
8
SS
SS waits 10 s for the MS to return to listening to paging
9
SS -> MS
PAGING REQUEST
10
MS -> SS
CHANNEL REQUEST
11
SS -> MS
IMMEDIATE ASSIGNMENT
12
MS -> SS
PAGING RESPONSE
13
SS -> MS
STATUS ENQUIRY
14
MS -> SS
RELEASE COMPLETE
cause 81# (invalid TI value)
15
SS
repeat steps 13‑14 to cover all the transaction identifiers from 000...110
16
SS -> MS
CHANNEL RELEASE
the main signalling link shall be released by the MS (L2: DISC/UA).
Specific message contents:
None.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.9.3 Outgoing call / U19 release request / RELEASE received
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.9.3.1 Definition
|
The call control entity of the MS being in the state, U19, a RELEASE message is received by the MS. This test is applicable for any equipment supporting at least one mobile originated circuit switched basic service.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.9.3.2 Conformance requirement
|
1) A CC-entity of the MS in CC-state U19, "Release Request", upon receipt of a RELEASE, shall release the MM-connection and enter the CC-state U0, "Null" with the CC entities relating to the seven mobile originating transaction identifiers in state U0, "Null".
References
3GPP TS 04.08 / 3GPP TS 24.008 subclauses 5.4.5, 11.3 and 5.5.3.2.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.9.3.3 Test purpose
|
To verify that a CC-entity of the MS in CC-state U19, "Release Request", upon receipt of a RELEASE, shall release the MM-connection and enters the CC-state U0, "Null" with the CC entities relating to the seven mobile originating transaction identifiers in state U0, "Null".
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.9.3.4 Method of test
|
Specific PICS statements
-
PIXIT statements
-
Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in MM-state "idle, updated" with valid TMSI and CKSN.
The MS is brought into the state U19 by using table 26.8.1.2/4.
Foreseen final state of the MS
U0, null.
Maximum duration of test
1 min 30 s.
Test procedure
An MO circuit switched basic service is selected that is supported by the MS; if the MS supports MO telephony, the selected basic service is telephony. If necessary, the MS is configured for that basic service. Then, the MS is made to initiate a call. The CC entity of the MS is brought to the state U19. The SS sends a RELEASE message to the MS. The MS shall release the MM-connection. The SS checks by using the status enquiry procedure that the CC entity has entered the state U0 with all the relevant transaction identifiers.
Expected sequence
Step
Direction
Message
Comments
1
SS -> MS
RELEASE
(note)
2
SS -> MS
STATUS ENQUIRY
3
MS -> SS
RELEASE COMPLETE
cause 81# (invalid TI value)
4
SS
repeat steps 2‑3 to cover all the transaction identifiers from 000...110
5
SS -> MS
CHANNEL RELEASE
the main signalling link shall be released by the MS (L2: DISC/UA).
Specific message contents:
NOTE: With the same cause number as originally contained in DISC and optional cause #102 recovery on timer expiry.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.9.4 Outgoing call / U19 release request / RELEASE COMPLETE received
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.9.4.1 Definition
|
The call control entity of the MS being in the state, U19, a RELEASE COMPLETE message is received by the MS. This test is applicable for any equipment supporting at least one mobile originated circuit switched basic service.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.9.4.2 Conformance requirement
|
1) A CC-entity of the MS in CC-state U19, "Release Request", upon receipt of a RELEASE COMPLETE, shall release the MM-connection and enter the CC-state U0, "Null" with the CC entities relating to the seven mobile originating transaction identifiers in state U0, "Null".
References
3GPP TS 04.08 / 3GPP TS 24.008 subclauses 5.4.4.3, 4.5.3 and 8.3.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.9.4.3 Test purpose
|
To verify that a CC-entity of the MS in CC-state U19, "Release Request", upon receipt of a RELEASE COMPLETE, shall release the MM-connection and enters the CC-state U0, "Null" with the CC entities relating to the seven mobile originating transaction identifiers in state U0, "Null".
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.9.4.4 Method of test
|
Specific PICS statements
-
PIXIT statements
-
Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in MM-state "idle, updated" with valid TMSI and CKSN.
The MS is brought into the state U19 by using table 26.8.1.2/1.
Foreseen final state of the MS
U0, null.
Maximum duration of test
1 min 30 s.
Test procedure
An MO circuit switched basic service is selected that is supported by the MS; if the MS supports MO telephony, the selected basic service is telephony. If necessary, the MS is configured for that basic service. Then, the MS is made to initiate a call. The CC entity of the MS is brought to the state U19. The SS sends a RELEASE COMPLETE message to the MS. The MS shall release the MM-connection. The SS checks by using the status enquiry procedure that the CC entity has entered the state U0 with all the relevant transaction identifiers.
Expected sequence
Step
Direction
Message
Comments
1
SS -> MS
RELEASE COMPLETE
2
SS -> MS
STATUS ENQUIRY
3
MS -> SS
RELEASE COMPLETE
cause 81# (invalid TI value)
4
SS
repeat steps 2‑3 to cover all the transaction identifiers from 000...110
5
SS -> MS
CHANNEL RELEASE
the main signalling link shall be released by the MS (L2: DISC/UA).
Specific message contents:
None.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.9.5 Outgoing call / U19 release request / lower layer failure
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.9.5.1 Definition
|
The call control entity of the MS being in the state, U19, a lower layer failure is accomplished at the MS and consequently, communication at layer 3 level with the peer entity is terminated. This test is applicable for any equipment supporting at least one mobile originated circuit switched basic service.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.9.5.2 Conformance requirement
|
A CC-entity of the MS in CC-state U19, "Release Request", having detected a lower layer failure, shall return to the idle mode, the CC entities relating to the seven mobile originating transaction identifiers shall be in state U0, "Null".
References
3GPP TS 04.08 / 3GPP TS 24.008 subclauses 4.5.2.3, 4.5.3, 5.5.3.2 and 8.3.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.9.5.3 Test purpose
|
To verify that a CC-entity of the MS in CC-state U19, "Release Request", having detected a lower layer failure, returns to the idle mode, the CC entities relating to the seven mobile originating transaction identifiers are in state U0, "Null".
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.2.9.5.4 Method of test
|
Specific PICS statements
-
PIXIT statements
-
Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in MM-state "idle, updated" with valid TMSI and CKSN.
The MS is brought into the state U19 by using table 26.8.1.2/1.
Foreseen final state of the MS
U0, null.
Maximum duration of test
1 min 30 s.
Test procedure
An MO circuit switched basic service is selected that is supported by the MS; if the MS supports MO telephony, the selected basic service is telephony. If necessary, the MS is configured for that basic service. Then, the MS is made to initiate a call. The MS is brought to the state U19. The SS generates a lower layer failure at the MS. The SS waits long enough to enable the MS to return to idle state listening to paging, and then pages MS to create RR-connection. Finally, the SS will check the state of the MS by using STATUS ENQUIRY with the relevant transaction identifiers.
Expected sequence
Step
Direction
Message
Comments
1
SS
SS generates lower layer failure
2
SS
SS waits 20 s for the MS to return to listening to paging
3
SS -> MS
PAGING REQUEST
4
MS -> SS
CHANNEL REQUEST
5
SS -> MS
IMMEDIATE ASSIGNMENT
6
MS -> SS
PAGING RESPONSE
7
SS -> MS
STATUS ENQUIRY
8
MS -> SS
RELEASE COMPLETE
cause 81# (invalid TI value)
9
SS
repeat steps 7‑8 to cover all the transaction identifiers from 000...110
10
SS -> MS
CHANNEL RELEASE
the main signalling link shall be released by the MS (L2: DISC/UA).
Specific message contents:
None.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.3 Establishment of an incoming call / Initial conditions
|
The tables below describe message exchanges which bring the MS in the requested initial states in case of an incoming call.
A state may be taken as initial only when all the states which lead to this initial states have been validated. The order will be U0, U6, U9, U7, U8, U10, U26 etc. as in the following tables.
Table 26.8.1.3/1: Establishment of an incoming call, procedure 1
Step
Direction
Message
Comments
1
SS -> MS
PAGING REQUEST
2
MS -> SS
CHANNEL REQUEST
3
SS -> MS
IMMEDIATE ASSIGNMENT
U0, SDCCH
4
MS -> SS
PAGING RESPONSE
5
SS -> MS
AUTHENTICATION REQUEST
6
MS -> SS
AUTHENTICATION RESPONSE
7
SS -> MS
CIPHERING MODE COMMAND
8
MS -> SS
CIPHERING MODE COMPLETE
9
SS -> MS
SETUP
U6, (note 1)
10
MS -> SS
CALL CONFIRMED
U9
A11
MS -> SS
CONNECT
U8, p = Y, (note 2)
B11
MS -> SS
ALERTING
U7, p = N, (note 2)
B12
MS
(note 3)
B13
MS -> SS
CONNECT
U8
14
SS -> MS
ASSIGNMENT COMMAND
TCH
15
MS -> SS
ASSIGNMENT COMPLETE
16
SS -> MS
CONNECT ACKNOWLEDGE
U10
NOTE 1: With signal information included in the SETUP message.
NOTE 2: The MS is supporting immediate connect (p = Y/N). See PICS/PIXIT statement.
NOTE 3: If necessary (see PICS/PIXIT statement), the MS is made to accept the call in the way described in a PICS/PIXIT statement.
Table 26.8.1.3/2: Establishment of an incoming call, procedure 2
Step
Direction
Message
Comments
1
SS -> MS
PAGING REQUEST
2
MS -> SS
CHANNEL REQUEST
3
SS -> MS
IMMEDIATE ASSIGNMENT
U0, SDCCH
4
MS -> SS
PAGING RESPONSE
5
SS -> MS
CIPHERING MODE COMMAND
6
MS -> SS
CIPHERING MODE COMPLETE
7
SS -> MS
SETUP
U6, (note 1)
8
MS -> SS
CALL CONFIRMED
U9
A9
MS -> SS
CONNECT
U8, p = Y, (note 2)
A10
SS -> MS
ASSIGNMENT COMMAND
TCH
A11
MS -> SS
ASSIGNMENT COMPLETE
B9
MS -> SS
ALERTING
U7, p = N, (note 2)
B10
SS -> MS
ASSIGNMENT COMMAND
TCH
B11
MS -> SS
ASSIGNMENT COMPLETE
B12
MS
(note 3)
B13
MS -> SS
CONNECT
U8
14
SS -> MS
AUTHENTICATION REQUEST
15
MS -> SS
AUTHENTICATION RESPONSE
16
SS -> MS
CONNECT ACKNOWLEDGE
U10
NOTE 1: With signal information included in the SETUP message.
NOTE 2: The MS is supporting immediate connect (p = Y/N). See PICS/PIXIT statement.
NOTE 3: If necessary (see PICS/PIXIT statement), the MS is made to accept the call in the way described in a PICS/PIXIT statement.
Table 26.8.1.3/3: Establishment of an incoming call, procedure 3
Step
Direction
Message
Comments
1
SS -> MS
PAGING REQUEST
2
MS -> SS
CHANNEL REQUEST
3
SS -> MS
IMMEDIATE ASSIGNMENT
U0, TCH
4
MS -> SS
PAGING RESPONSE
5
SS -> MS
AUTHENTICATION REQUEST
6
MS -> SS
AUTHENTICATION RESPONSE
7
SS -> MS
CIPHERING MODE COMMAND
8
MS -> SS
CIPHERING MODE COMPLETE
9
SS -> MS
CHANNEL MODE MODIFY
(note 1)
10
MS -> SS
CHANNEL MODE MODIFY ACKNOWLEDGE
11
SS -> MS
SETUP
U6, (note 2)
12
MS -> SS
CALL CONFIRMED
U9
A13
MS -> SS
CONNECT
U8, p = Y, (note 3)
B13
MS -> SS
ALERTING
U7, p = N, (note 3)
B14
MS
(note 4)
B15
MS -> SS
CONNECT
U8
16
SS -> MS
CONNECT ACKNOWLEDGE
U10
NOTE 1: Assigned channel is appropriate for the chosen mobile originated circuit switched basic service.
NOTE 2: With signal information included in the SETUP message.
NOTE 3: The MS is supporting immediate connect (p = Y/N). See PICS/PIXIT statement.
NOTE 4: If necessary (see PICS/PIXIT statement), the MS is made to accept the call in the way described in a PICS/PIXIT statement.
Table 26.8.1.3/4: Establishment of an incoming call, procedure 4
Step
Direction
Message
Comments
1
SS -> MS
PAGING REQUEST
2
MS -> SS
CHANNEL REQUEST
3
SS -> MS
IMMEDIATE ASSIGNMENT
U0, SDCCH
4
MS -> SS
PAGING RESPONSE
5
SS -> MS
CIPHERING MODE COMMAND
6
MS -> SS
CIPHERING MODE COMPLETE
7
SS -> MS
SETUP
U6, (note 1)
8
MS -> SS
CALL CONFIRMED
U9
9
SS -> MS
ASSIGNMENT COMMAND
TCH
10
MS -> SS
ASSIGNMENT COMPLETE
A11
MS -> SS
CONNECT
U8, p = Y, (note 2)
B11
MS -> SS
ALERTING
U7, p = N, (note 2)
B12
MS
(note 3)
B13
MS -> SS
CONNECT
U8
14
SS -> MS
AUTHENTICATION REQUEST
15
MS -> SS
AUTHENTICATION RESPONSE
16
SS -> MS
CONNECT ACKNOWLEDGE
U10
NOTE 1: The signal information element is not included in the SETUP message.
NOTE 2: The MS is supporting immediate connect (p = Y/N). See PICS/PIXIT statement.
NOTE 3: If necessary (see PICS/PIXIT statement), the MS is made to accept the call in the way described in a PICS/PIXIT statement.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.3.1 Incoming call / U0 null state
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.3.1.1 Incoming call / U0 null state / SETUP received with a non supported bearer capability
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.3.1.1.1 Definition
|
The call control entity of the MS being in the state, U0, a SETUP message is received with only one bearer capability and this bearer capability is not supported by the MS. This test is applicable for all equipment.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.3.1.1.2 Conformance requirement
|
1) A CC entity of the MS, upon receipt of SETUP containing one bearer capability and this bearer capability is not supported, shall return a RELEASE COMPLETE with correct cause value to its peer entity and return to the idle mode. The CC-entities relating to the seven mobile terminating transaction identifiers shall be in the state U0,"Null".
References
3GPP TS 04.08 / 3GPP TS 24.008 subclause 5.2.2.2 and annex B.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.3.1.1.3 Test purpose
|
To verify that a CC entity of the MS, upon receipt of SETUP containing one bearer capability and this bearer capability is not supported, returns a RELEASE COMPLETE with correct cause value to its peer entity, and returns to the idle mode. To verify that the CC-entities relating to the seven mobile terminating transaction identifiers are then in the state U0,"Null".
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.3.1.1.4 Method of test
|
Specific PICS statements
-
PIXIT statements
-
Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in MM-state "idle, updated" with valid TMSI and CKSN.
Foreseen final state of the MS
U0, null.
Maximum duration of test
30 s.
Test procedure
A mobile terminated call is initiated. The MS receives a SETUP message that contains a bearer capability not supported by the MS. The MS returns a RELEASE COMPLETE message. The SS checks by using the status enquiry procedure that the CC entity is still in the state U0 with all the relevant transaction identifiers.
Expected sequence
Step
Direction
Message
Comments
1
SS -> MS
PAGING REQUEST
SS sends paging
2
MS -> SS
CHANNEL REQUEST
3
SS -> MS
IMMEDIATE ASSIGNMENT
(SDCCH)
4
MS -> SS
PAGING RESPONSE
5
SS -> MS
AUTHENTICATION REQUEST
6
MS -> SS
AUTHENTICATION RESPONSE
7
SS -> MS
CIPHERING MODE COMMAND
8
MS -> SS
CIPHERING MODE COMPLETE
9
SS -> MS
SETUP
(note 1)
10
MS -> SS
RELEASE COMPLETE
(note 2)
11
SS -> MS
STATUS ENQUIRY
12
MS ->SS
RELEASE COMPLETE
Cause #81 (invalid TI value).
13
SS
Repeat steps 11‑12 to cover all the transaction identifiers from 000... 110.
Specific message contents:
NOTE 1: With one bearer capability and that bearer capability is not supported by the MS.
NOTE 2: With cause #88 incompatible destination.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.3.2 Incoming call / U6 call present
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.3.2.1 Incoming call / U6 call present / automatic call rejection
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.3.2.1.1 Definition
|
Although the state U6 is transient, the ability to refuse a call (automatically) in this state is tested, if it is implemented at the MS. The test is applicable for those equipments described above supporting at least one mobile terminating circuit switched basic service.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.3.2.1.2 Conformance requirement
|
1) A CC entity of the MS in CC-state U6, "Call Present", upon receipt of a rejection indication of the incoming call from the user, send RELEASE COMPLETE with the appropriate cause value to its peer entity and enter the CC-state U0, "Null". The CC entities relating to the seven mobile terminating transaction identifiers shall be in state U0, "Null".
References
3GPP TS 04.07 / 3GPP TS 24.007 subclause 6.2.2,
3GPP TS 04.08 / 3GPP TS 24.008 subclauses 5.2.2.3.1, 5.5.3.2 and 8.3.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.3.2.1.3 Test purpose
|
To verify that a CC entity of the MS in CC-state U6, "Call Present", shall upon receipt of a rejection indication of the incoming call from the user, shall send RELEASE COMPLETE with the appropriate cause value to its peer entity and enter the CC-state U0, "Null". The CC entities relating to the seven mobile terminating transaction identifiers are then in state U0, "Null".
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.3.2.1.4 Method of test
|
Specific PICS statements
-
PIXIT statements
-
Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in MM-state "idle, updated" with valid TMSI and CKSN.
The MS is brought into the state U6 by using table 26.8.1.3/2.
Foreseen final state of the MS
U0, null.
Maximum duration of test
1 min 30 s.
Test procedure
A teleservice is selected that is supported by the MS; if the MS supports speech, the selected teleservice is speech. If necessary, the MS is configured for that teleservice. Then a mobile terminated call is initiated. The call control entire of the MS is brought to the state U6 (Note: The state U6 is not checked, since it is not stable). The MS is made to refuse the call (the refusal may require some preliminary preparations in order to achieve refusal at this point). The MS shall send a RELEASE COMPLETE message and enter a call control state U0. The SS checks by using the status enquiry procedure that the CC entity has entered the state U0 with all the relevant transaction identifiers.
Expected sequence
Step
Direction
Message
Comments
1
the MS is made to refuse the call
2
MS -> SS
RELEASE COMPLETE
(note)
3
SS -> MS
STATUS ENQUIRY
4
MS -> SS
RELEASE COMPLETE
cause 81# (invalid TI value)
5
SS
repeat steps 3‑4 to cover all the transaction identifiers from 000...110
6
SS -> MS
CHANNEL RELEASE
the main signalling link shall be released by the MS (L2: DISC/UA).
Specific message contents:
NOTE: With cause value #21 call rejected.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.3.3 Incoming call / U9 mobile terminating call confirmed
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.3.3.1 Incoming call / U9 mobile terminating call confirmed / alerting or immediate connecting
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.3.3.1.1 Definition
|
The call control entity of the MS having entered the state, U9, with signal information received in the preceding SETUP message, the subsequent behaviour of the MS is tested. This test is applicable for any equipment supporting at least one mobile terminating circuit switched basic service.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.3.3.1.2 Conformance requirement
|
1) A CC entity in CC-state U9, "MS Terminating Call Confirmed", (if signalled by the network in previous SETUP message that it may alert) shall either send a ALERTING message to its peer entity and enter state U7, or send a CONNECT message to its peer entity and enter U8.
References
3GPP TS 04.08 / 3GPP TS 24.008 subclause 5.2.2.3.2
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.3.3.1.3 Test purpose
|
To verify that a CC entity in CC-state U9, "MS Terminating Call Confirmed", (if signalled by the network in previous SETUP message that it may alert) will either send a ALERTING message to its peer entity and enter state U7, or send a CONNECT message to its peer entity and enter U8.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.3.3.1.4 Method of test
|
Specific PICS statements
- Support of immediate connect (TSPC_AddInfo_ImmConn)
PIXIT statements
-
Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in MM-state "idle, updated" with valid TMSI and CKSN.
The MS is brought into the state U9 by using table 26.8.1.3/2.
Foreseen final state of the MS
- U8, connect request, if the MS supports immediate connect for the selected basic service;
- otherwise U7, call received.
Maximum duration of test
30 s.
Test procedure
An MT circuit switched basic service is selected that is supported by the MS; if the MS supports MT telephony, the selected basic service is telephony. If necessary, the MS is configured for that basic service. Then a mobile terminated call is initiated. The CC entity of the MS is brought to the state U9 by using a SETUP message containing signalling information element. (The state U9 is not a stable state in this case, and consequently it is not checked as an initial state.) If the MS supports immediate connect for the selected basic service (p = Y), it sends a CONNECT message and enters the state U8, connect request. Otherwise (p = N) the MS sends an ALERTING message and enters the state U7, call receiving. The SS checks by using the status enquiry procedure that the CC entity has entered its state as described.
Expected sequence
Step
Direction
Message
Comments
A1
MS -> SS
CONNECT
p = Y
A2
SS -> MS
STATUS ENQUIRY
A3
MS -> SS
STATUS
cause 30#, state U8
B1
MS -> SS
ALERTING
p = N
B2
SS -> MS
STATUS ENQUIRY
B3
MS -> SS
STATUS
cause 30#, state U7
Specific message contents:
None.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.3.3.2 Incoming call / U9 mobile terminating call confirmed / TCH assignment
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.3.3.2.1 Definition
|
The call control entity of the MS being in the state, U9, an assignment procedure is performed for traffic channel. This test is applicable for any equipment supporting at least one MT circuit switched basic service, for which immediate connect is not used.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.3.3.2.2 Conformance requirement
|
1) A CC-entity of the MS in CC-state U9, "MS Terminating Call Confirmed", when allocated a traffic channel by the network performing the assignment procedure, shall perform a layer 2 establishment on the FACCH, send a ALERTING message and enter state U7.
References
3GPP TS 04.08 / 3GPP TS 24.008 subclauses 3.4.3, 5.2.2.7 and 5.2.2.3.2.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.3.3.2.3 Test purpose
|
To verify that a CC-entity of the MS in CC-state U9, "MS Terminating Call Confirmed", when allocated a traffic channel by the network performing the assignment procedure, performs a layer 2 establishment on the FACCH, sends a ALERTING message and enters state U7.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.3.3.2.4 Method of test
|
Specific PICS statements
-
PIXIT statements
-
Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in MM-state "idle, updated" with valid TMSI and CKSN.
The MS is brought into the state U9 by using table 26.8.1.3/4.
Foreseen final state of the MS
U9, mobile terminating call confirmed.
Maximum duration of test
30 s.
Test procedure
An MT circuit switched basic service is selected that is supported by the MS and for which the MS does not use immediate connection; if the MS supports MT telephony without immediate connection, the selected basic service is telephony. If necessary, the MS is configured for that basic service. Then a mobile terminated call is initiated. The CC entity of the MS is brought to the state U9 (by using a SETUP message not containing the signal information element). The SS sends an ASSIGNMENT COMMAND for traffic channel to the MS. The MS shall establish layer 2 link on the newly allocated channel and respond with an ASSIGNMENT COMPLETE message. The MS sends an ALERTING message and enters state U7, call received. The SS verifies by using the status enquiry procedure that the MS has entered the correct state.
Expected sequence
Step
Direction
Message
Comments
1
SS -> MS
ASSIGNMENT COMMAND
TCH, an appropriate non-signalling mode
2
MS
the MS shall establish L2 link
3
MS -> SS
ASSIGNMENT COMPLETE
4
MS -> SS
ALERTING
5
SS -> MS
STATUS ENQUIRY
6
MS -> SS
STATUS
cause 30#, state U7
Specific message contents:
None.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.3.3.3 Void
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.3.3.4 Incoming call / U9 mobile terminating call confirmed / DISCONNECT received
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.3.3.4.1 Definition
|
The call control entity of the MS being in the state, U9, a DISCONNECT message is received by the MS. This test is applicable for any equipment supporting at least one MT circuit switched basic service, for which immediate connect is not used.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.3.3.4.2 Conformance requirement
|
1) A CC-entity of the MS in CC-state U9, "MS Terminating Call Confirmed", upon receipt of a DISCONNECT shall return a RELEASE message and enter the CC-state U19, "Release Request".
References
3GPP TS 04.08 / 3GPP TS 24.008 subclause 5.4.4.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.3.3.4.3 Test purpose
|
To verify that a CC-entity of the MS in CC-state U9, "MS Terminating Call Confirmed", upon receipt of a DISCONNECT returns a RELEASE message and enters the CC-state U19, "Release Request".
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.3.3.4.4 Method of test
|
Specific PICS statements
-
PIXIT statements
-
Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in MM-state "idle, updated" with valid TMSI and CKSN.
The MS is brought into the state U9 by using table 26.8.1.3/4.
Foreseen final state of the MS
U19, release request.
Maximum duration of test
30 s.
Test procedure
An MT circuit switched basic service is selected that is supported by the MS and for which the MS does not use immediate connection; if the MS supports MT telephony without immediate connection, the selected basic service is telephony. If necessary, the MS is configured for that basic service. Then a mobile terminated call is initiated. The CC entity of the MS is brought to the state U9. The SS sends a DISCONNECT message to the MS. The MS responds by sending a RELEASE message and enters state U19, release request. The SS verifies by using the status enquiry procedure that the MS has entered the correct state.
Expected sequence
Step
Direction
Message
Comments
1
SS -> MS
DISCONNECT
2
MS -> SS
RELEASE
3
SS -> MS
STATUS ENQUIRY
4
MS -> SS
STATUS
cause 30#, state U19
Specific message contents:
None.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.3.3.5 Incoming call / U9 mobile terminating call confirmed / RELEASE received
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.8.1.3.3.5.1 Definition
|
The call control entity of the MS being in the state, U9, a RELEASE message is received by the MS. This test is applicable for any equipment supporting at least one MT circuit switched basic service, for which immediate connect is not used.
|
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.