hash
stringlengths 32
32
| doc_id
stringlengths 5
12
| section
stringlengths 4
1.47k
| content
stringlengths 0
6.67M
|
|---|---|---|---|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
1 The mobile station supports Repeated SACCH and Repeated Downlink FACCH
|
An MS that only supports Repeated Downlink FACCH shall set this bit field to ‘0’.
NOTE 1)
TSPC_Repeated_SACCH
TSPC_Repeated_FACCH
49
GSM 710 Associated Radio Capability
See the semantic rule for the sending of this field.
This field indicates whether GSM 710 band is supported and its associated radio capability.
The radio capability contains the binary coding of the power class associated with the GSM 710 band (see 3GPP TS 45.005 [33]).
NOTE: The coding of the power class for GSM 710 in GSM 710 Associated Radio Capability is different to that used in the Mobile Station Classmark 1 and Mobile Station Classmark 2 information elements.
TSPC_Type_GSM_710_Class2
TSPC_Type_GSM_710_Class3
TSPC_Type_GSM_710_Class4
TSPC_Type_GSM_710_Class5
50
T-GSM 810 Associated Radio Capability
See the semantic rule for the sending of this field.
This field indicates whether T- GSM 810 band is supported and its associated radio capability.
The radio capability contains the binary coding of the power class associated with the T-GSM 810 band (see 3GPP TS 45.005 [33]).
NOTE: The coding of the power class for T-GSM 810 in T-GSM 810 Associated Radio Capability is different to that used in the Mobile Station Classmark 1 and Mobile Station Classmark 2 information elements.
TSPC_Type_T_GSM_810_Class2
TSPC_Type_T_GSM_810_Class3
TSPC_Type_T_GSM_810_Class4
TSPC_Type_T_GSM_810_Class5
51
Ciphering Mode Setting Capability
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
0 The mobile station does not support the Ciphering Mode Setting IE in the
|
DTM ASSIGNMENT COMMAND message
1 The mobile station supports the Ciphering Mode Setting IE in the DTM ASSIGNMENT COMMAND
message
TSPC_Ciphering_Mode_Setting_Cap
52
Additional Positioning Capabilities
0 The mobile station does not support additional positioning capabilities which can be retrieved using RRLP
1 The mobile station supports additional positioning capabilities which can be retrieved using RRLP.
TSPC_Additional_Positioning_Cap
53
E-UTRA FDD support
Bit
0 E-UTRA FDD not supported
1 E-UTRA FDD supported
TSPC_Type_E-UTRA_FDD
54
E-UTRA TDD support
Bit
0 E-UTRA TDD not supported
1 E-UTRA TDD supported
TSPC_Type_E-UTRA_TDD
55
E-UTRA Measurement and Reporting support
Bit
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
0 E-UTRAN Neighbour Cell measurements and measurement reporting while having an RR connection
|
not supported
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
1 E-UTRAN Neighbour Cell measurements and measurement reporting while having an RR connection
|
supported
TSPC_E-UTRA_Measurement_Reporting
56
Priority Based Cell Reselection
Bit
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
0 Priority-based cell reselection not supported
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
1 Priority-based cell reselection supported
|
TSPC_Priority_Based_Cell_Reselection
57
UTRA CSG Cells Reporting
Bit
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
0 Reporting of UTRAN CSG cells not supported
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
1 Reporting of UTRAN CSG cells supported
|
TSPC_UTRA_CSG_Cells_Reporting
58
VAMOS Level
Bits
2 1
0 0 VAMOS not supported
0 1 VAMOS I supported
1 0 VAMOS II supported
1 1 VAMOS III supported.
(NOTE 1)
TSPC_VAMOS_Type1
TSPC_VAMOS_Type2
TSPC_VAMOS_Type3
59
TIGHTER Capability
Bits
2 1
0 0 TIGHTER not supported
0 1 TIGHTER supported for speech and signalling channels only
1 0 TIGHTER supported for speech and signalling channels and for GPRS and EGPRS, but not for EGPRS2
1 1 TIGHTER supported for speech and signalling channels and for GPRS, EGPRS and EGPRS2
(NOTE 2)
(TSPC_TIGHTER_SPEECH_SIGNALLING OR
TSPC_TIGHTER_GPRS_EGPRS OR
TSPC_TIGHTER_EGPRS2) AND
TSPC_DARP_Phase1
60
Selective Ciphering of Downlink SACCH
Bit
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
0 Selective Ciphering of Downlink SACCH not supported
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
1 Selective Ciphering of Downlink SACCH supported
|
TSPC_Selective_Ciphering_DL_SACCH
61
ER Band Support
Bit
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
0 ER-GSM not supported
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
1 ER-GSM supported
|
NOTE 3)
TSPC_Type_ER_GSM_Band
NOTE 1: An MS indicating support for VAMOS (Item 58) shall also indicate support for either “Downlink Advanced Receiver Performance – phase I” or “Downlink Advanced Receiver Performance – phase II” (Item 43), and for “Repeated SACCH and Repeated Downlink FACCH” (Item 48).
((TSPC_VAMOS_Type1 OR TSPC_VAMOS_Type2 OR TSPC_VAMOS_Type3) AND (TSPC_DARP_Phase1 OR TSPC_DARP_Phase2) AND (TSPC_Repeated_SACCH OR TSPC_Repeated_FACCH))
NOTE 2: An MS indicating support for TIGHTER (Item 59) shall also indicate support for “Downlink Advanced Receiver Performance – phase I” (Item 43), ((TSPC_TIGHTER_SPEECH_SIGNALLING OR TSPC_TIGHTER_GPRS_EGPRS OR TSPC_TIGHTER_EGPRS2) AND (TSPC_DARP_Phase1))
NOTE 3: An MS indicating the support of ER-GSM shall also indicate support for R-GSM band (Item 1 and 4)( TSPC_Type_GSM_R_Band)
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.11.1 Classmark change
|
This procedure allows the MS to indicate to the network that a change in the classmark (e.g. due to addition of power amplification) has taken place.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.11.1.1 Conformance requirements
|
If the RF power capability of the MS is changed during a call, this change shall be signalled to the network.
If the RF power capability of the MS is changed in idle mode, the up to date RF power capability shall be signalled to the network during RR connection establishment.
References
3GPP TS 04.08 / 3GPP TS 44.018 subclause 3.4.10.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.11.1.2 Test purpose
|
To verify that if the RF power capability or any other capability indicated in a Classmark IE of the MS is changed during a call, the change is communicated on the DCCH to the network.
To verify that if the RF power capability or any other capability indicated in a Classmark IE of the MS is changed in idle mode, the out of date capabilities are not communicated to the network during RR connection establishment.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.11.1.3 Method of test
|
Initial Conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in the "idle, updated" state, with a TMSI allocated and with no additional power amplification applied.
Specific PICS statements
• TSPC_Type_xxx (all appropriate power classes)
• TSPC_AddInfo_Full_rate_version_1
• TSPC_AddInfo_Full_rate_version_2
• TSPC_AddInfo_Full_rate_version_3
PIXIT statements
-
Foreseen Final State of the MS
"Idle, updated", with TMSI allocated and with no additional power amplification applied.
Test Procedure
With the MS in idle mode, the RF power capability shall be changed by the addition of power amplification, after which the MS is made to originate a call. The new RF power capability shall be included in the CM SERVICE REQUEST message. After the call has reached the Call Control state U10, the RF power capability of the MS is changed by removal of the additional power amplification. The MS shall send a CLASSMARK CHANGE message indicating the new RF power capability. The RF power capability is then changed by adding the power amplification. The MS shall again send a CLASSMARK CHANGE message indicating the new RF power capability. The call is then released by the SS.
With the MS in idle mode, the power amplification is removed. The SS then pages the MS, which in the PAGING RESPONSE message shall indicate the correct RF power capability.
Finally the SS transmits a CHANNEL RELEASE to end the test.
Maximum Duration of Test
5 minutes, including 1 minute for any necessary operator actions.
Expected Sequence
Step
Direction
Message
Comments
1
--------
--------
Add power amplification.
2
--------
--------
The MS shall be made to originate a call.
3
MS -> SS
CHANNEL REQUEST
Establ. Cause = "Originating call" NECI not equal to one.
4
SS -> MS
IMMEDIATE ASSIGNMENT
5
MS -> SS
CM SERVICE REQUEST
The "Mobile Station Classmark 2" IE shall indicate the new RF power capability.
6
SS -> MS
CM SERVICE ACCEPT
7
MS -> SS
SETUP
8
SS -> MS
CALL PROCEEDING
9
SS -> MS
ALERTING
10
SS -> MS
ASSIGNMENT COMMAND
The Channel Mode is a non-signalling mode arbitrarily selected from the full rate capabilities declared for the MS
11
MS -> SS
ASSIGNMENT COMPLETE
12
SS -> MS
CONNECT
13
MS -> SS
CONNECT ACKNOWLEDGE
14
--------
--------
Remove the power amplification.
15
MS -> SS
CLASSMARK CHANGE
The "Mobile Station Classmark 2" IE shall indicate the new power capability.
16
--------
--------
Add power amplification.
17
MS -> SS
CLASSMARK CHANGE
The "Mobile Station Classmark 2" IE shall indicate the new power capability.
18
SS -> MS
CHANNEL RELEASE
19
--------
--------
Remove the power amplification.
--------
--------
The SS waits 12 s to allow the MS to perform cell reselection.
20
SS -> MS
PAGING REQUEST TYPE 1
21
MS -> SS
CHANNEL REQUEST
Establ. Cause = "Answer to paging".
22
SS -> MS
IMMEDIATE ASSIGNMENT
23
MS -> SS
PAGING RESPONSE
The "Mobile Station Classmark 2" IE shall indicate the new power capability.
24
SS -> MS
CHANNEL RELEASE
Specific Message Contents
None.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.11.2 Classmark interrogation
|
This procedure allows the network to request the MS to supply all its classmark information to the network.
Networks may systematically use this procedure (e.g. during location updating) and, it if is incorrectly implemented in the MS, the basic connection establishment procedure may systematically fail.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.11.2.1 Conformance requirements
|
On receipt of a CLASSMARK ENQUIRY message, the MS sends a CLASSMARK CHANGE message to the network containing the Mobile Station Classmark 2 information element and depending upon the contents of this information element, possibly the Mobile Station Classmark 3 information element.
References
3GPP TS 04.08 / 3GPP TS 44.018 subclauses 3.4.11 and 9.1.11.1.
3GPP TS 04.13 subclause 5.2.9.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.11.2.2 Test purpose
|
To verify that if the network requests the MS to supply all its classmark information then this information is communicated on the DCCH to the network.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.11.2.3 Method of test
|
Initial Conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
"Idle, updated", with TMSI allocated.
Specific PICS statements
-
PIXIT statements
-
Foreseen Final State of the MS
"Idle, updated", with TMSI allocated.
Test Procedure
The MS is switched off (or has its power removed).
The SS then sets the IMSI attach-detach flag in the SYSTEM INFORMATION messages so that the MS shall perform a location update when switched on.
The MS is switched on (or its power is re-applied). The MS then initiates a location update attempt. After the mobile has sent the LOCATION UPDATING REQUEST message, the SS transmits a CLASSMARK ENQUIRY message. The MS shall be ready to transmit the CLASSMARK CHANGE message before 300 ms after the end of the CLASSMARK ENQUIRY message. The contents of the Mobile Station Classmark 2 Information element and the contents of Mobile Station Classmark 3 information element is recorded and compared to the corresponding PICS/PIXIT statement as shown in table 26.6.11a and 26.6.11b.
The term "ready to transmit" is defined in 3GPP TS 04.13.
Then the SS transmits a LOCATION UPDATING ACCEPT message that does not contain a Mobile Identity IE.
Maximum Duration of Test
2 minutes.
Expected Sequence
Step
Direction
Message
Comments
1
MS
The MS is switched off (or has its power removed).
2
SS
IMSI attach-detach flag changed.
3
MS
The MS is switched on (or its power is re-applied).
4
MS -> SS
CHANNEL REQUEST
5
SS -> MS
IMMEDIATE ASSIGNMENT
6
MS -> SS
LOCATION UPDATING REQUEST
7
SS -> MS
CLASSMARK ENQUIRY
8
MS -> SS
CLASSMARK CHANGE
This message shall be ready to be transmitted before 300 ms after the completion of step 7.
SS compares the contents of the Mobile Station Classmark 2/3 Information elements to the corresponding PICS/PIXIT statements.
9
SS -> MS
LOCATION UPDATING ACCEPT
10
SS -> MS
CHANNEL RELEASE
Specific Message Contents
Contents of LOCATION UPDATING ACCEPT message:
Protocol Discriminator
MM message
Skip Indicator
0000
Message Type
00000010
Location Area Identification
- Mobile Country Code
001 decimal
- Mobile Network Code
01 decimal (PCS 1 900: 011 decimal)
- Location Area Code
0001H
Mobile Identity
Not present
Follow on proceed
Not present
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.11.3 Classmark interrogation / UTRAN Classmark Change
|
This procedure allows the network to request the MS to supply all its classmark information to the network. In addition the network may request a MS supporting UTRAN to send the UTRAN classmark information.
Networks may systematically use this procedure (e.g. during location updating) and, it if is incorrectly implemented in the MS, the basic connection establishment procedure may systematically fail.
If the last timeslot of the message block containing a CLASSMARK ENQUIRY message occurs at time T, then the MS shall be ready to transmit the CLASSMARK CHANGE message before T + 300 ms.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.11.3.1 Conformance requirements
|
On receipt of a CLASSMARK ENQUIRY message, the MS sends a CLASSMARK CHANGE message to the network containing the Mobile Station Classmark 2 information element and depending upon the contents of this information element, possibly the Mobile Station Classmark 3 information element.
References
3GPP TS 04.08 / 3GPP TS 44.018 subclauses 3.4.11 and 9.1.11.1.
3GPP TS 04.13 subclause 5.2.9.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.11.3.2 Test purpose
|
To verify that if the network requests the MS to supply all its classmark information, including the UTRA Classmark information, then this information is communicated on the DCCH to the network.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.11.3.3 Method of test
|
Initial Conditions
System Simulator:
1 cell, default parameters. In SI3 is ATT flag is set to 1 and Early Classmark Sending Control flag is set to Low.
Mobile Station:
Powered off.
Specific PICS statements
-
PIXIT statements
Test Procedure
The MS is switched on (or its power is re-applied). The MS then initiates a location update attempt. After the mobile has sent the LOCATION UPDATING REQUEST message, the SS transmits a CLASSMARK ENQUIRY message. The MS shall be ready to transmit the CLASSMARK CHANGE message within 300 ms after the end of the CLASSMARK ENQUIRY message. The contents of the Mobile Station Classmark 2 Information element and the contents of Mobile Station Classmark 3 information element are compared to the corresponding PICS/PIXIT statements as shown in table 26.6.11a and 26.6.11b.
The term "ready to transmit" is defined in 3GPP TS 04.13.
Then the SS transmits a LOCATION UPDATING ACCEPT message that does not contain a Mobile Identity IE.
Maximum Duration of Test
2 minutes.
Expected Sequence
Step
Direction
Message
Comments
1
MS
The MS is switched on.
2
MS -> SS
CHANNEL REQUEST
3
SS -> MS
IMMEDIATE ASSIGNMENT
4
MS -> SS
LOCATION UPDATING REQUEST
5
SS -> MS
CLASSMARK ENQUIRY
6
MS -> SS
CLASSMARK CHANGE
This message shall be ready transmitted within 300 ms after the completion of step 5.
If MS support UMTS FDD:
UMTS FDD Radio Access Capability = 1
If MS support UMTS TDD:
UMTS TDD Radio Access Capability = 1
Contents as declared in PICS/ PIXIT.
7
MS -> SS
UTRAN Classmark Change
Contents as declared in PIXIT.
8
SS -> MS
LOCATION UPDATING ACCEPT
9
SS -> MS
CHANNEL RELEASE
Specific Message Contents
Content of CLASSMARK ENQUIRY message:
Protocol Discriminator
RR management
Skip Indicator
0000
Message Type
00010011
Classmark Enquiry Mask value part
00001100, note
Note CLASSMARK CHANGE message is requested; UTRAN CLASSMARK CHANGE message is requested; CDMA2000 CLASSMARK CHANGE message not requested; and GERAN IU MODE CLASSMARK CHANGE message not requested.
Contents of LOCATION UPDATING ACCEPT message:
Protocol Discriminator
MM message
Skip Indicator
0000
Message Type
00000010
Location Area Identification
- Mobile Country Code
001 decimal
- Mobile Network Code
01 decimal (PCS 1 900: 011 decimal)
- Location Area Code
0001H
Mobile Identity
Not present
Follow on proceed
Not present
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.11.4 Early UTRAN Classmark Sending
|
This procedure allows the network to request the MS to supply all its classmark information to the network. In addition the network may request a MS supporting UTRAN to send the UTRAN classmark information.
Networks may systematically use this procedure (e.g. during location updating) and, it if is incorrectly implemented in the MS, the basic connection establishment procedure may systematically fail.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.11.4.1 Conformance requirements
|
Early classmark sending consists in the mobile station sending as early as possible after access a CLASSMARK CHANGE message to provide the network with additional classmark information. In addition a MS supporting UTRAN sends a UTRAN Classmark Change message; an MS supporting CDMA2000 sends a CDMA2000 Classmark Change. When a CLASSMARK CHANGE message and one or more additional UTRAN Classmark Change or CDMA2000 Classmark Change messages are to be sent, the CLASSMARK CHANGE message shall be sent first.
….
A mobile station which implements the support of one or more 3G Radio Access Technology shall also implement the « Controlled Early Classmark Sending » option; in this case neither UTRAN CLASSMARK CHANGE nor CDMA2000 CLASSMARK CHANGE message shall be sent by the mobile if prohibited by the 3G Early Classmark Sending Restriction parameter in the last reception in the accessed cell of the SYSTEM INFORMATION TYPE 3 message or the PACKET SYSTEM INFORMATION TYPE 2 message (see 3GPP TS 04.60). If the PACKET SYSTEM INFORMATION TYPE 2 messages have been received, but the 3G Early Classmark Sending Restriction flag is not included, the mobile station shall assume neither UTRAN nor cdma2000 classmark change message shall be sent with the Early Classmark Sending.
During a contention resolution procedure, if the last timeslot of the block containing a Layer 2 UA frame, occurs at time T, then the MS shall be ready to transmit the CLASSMARK CHANGE message, if applicable (see GSM 04.06 [3] and GSM 04.08 [4]), before T + 40 ms.
References
3GPP TS 04.08 / 3GPP TS 44.018 subclauses 3.3.1.1.4.1 and 9.1.11.1.
3GPP TS 04.13 subclause 5.2.9.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.11.4.2 Test purpose
|
To verify that if the network requests the MS to supply all its classmark information, including the UTRAN Classmark information, then this information is communicated on the DCCH to the network. The request of the classmark information is indicated in SYSTEM INFORMATION TYPE 3.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.11.4.3 Method of test
|
Initial Conditions
System Simulator:
1 cell, default parameters.
The SS shall transmit SI3 with ATT flag is set to 1 and both Early Classmark Sending Restriction and 3G Early Classmark Sending Restriction parameter set to High.
Mobile Station:
Powered off.
Specific PICS statements
-
PIXIT statements
• Contents of Mobile Station Classmark 2 information element
• Contents of Mobile Station Classmark 3 information element
• Contents of UTRAN Classmark Change information
Test Procedure
The MS is switched on (or its power is re-applied). The MS then initiates a location update attempt. After the mobile has sent the LOCATION UPDATING REQUEST message, the MS transmits the CLASSMARK CHANGE and UTRAN CLASSMARK CHANGE messages.
Then the SS transmits a LOCATION UPDATING ACCEPT message that does not contain a Mobile Identity IE.
Maximum Duration of Test
2 minutes.
Expected Sequence
Step
Direction
Message
Comments
1
MS
The MS is switched on.
2
MS -> SS
CHANNEL REQUEST
3
SS -> MS
IMMEDIATE ASSIGNMENT
4
MS -> SS
LOCATION UPDATING REQUEST
(SABM)
5
SS -> MS
LOCATION UPDATING REQUEST
(UA)
6
MS -> SS
CLASSMARK CHANGE
This message shall be transmitted within 69 ms after the completion of step 5.
If MS support UMTS FDD:
UMTS FDD Radio Access Capability = 1
If MS support UMTS TDD:
UMTS TDD Radio Access Capability = 1
Contents as declared in PIXIT.
7
MS -> SS
UTRAN CLASSMARK CHANGE
Contents as declared in PIXIT.
8
SS -> MS
LOCATION UPDATING ACCEPT
9
SS -> MS
CHANNEL RELEASE
Specific Message Contents
Contents of LOCATION UPDATING ACCEPT message:
Protocol Discriminator
MM message
Skip Indicator
0000
Message Type
00000010
Location Area Identification
- Mobile Country Code
001 decimal
- Mobile Network Code
01 decimal (PCS 1 900: 011 decimal)
- Location Area Code
0001H
Mobile Identity
Not present
Follow on proceed
Not present
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.12 Test of channel release
|
The purpose of this procedure is to deactivate the dedicated channels in use. When the channels are released, the MS returns to the CCCH configuration, idle mode.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.12.1 Channel release / SDCCH
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.12.1.1 Conformance requirements
|
After the acknowledgement of the Layer 2 disconnection by the network, the MS shall not produce any further RF-transmission.
References
3GPP TS 04.08 / 3GPP TS 44.018 subclause 3.4.13.1
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.12.1.2 Test purpose
|
To verify that the MS is able to correctly release an SDCCH after having received a CHANNEL RELEASE message.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.12.1.3 Method of test
|
Initial Conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in the "idle, updated" state, with a TMSI allocated.
Specific PICS statements
-
PIXIT statements
-
Foreseen Final State of the MS
"Idle, updated", with TMSI allocated.
Test Procedure
The MS is paged and allocated a dedicated channel and the Layer 2 signalling link is established. The SS then sends a CHANNEL RELEASE message, after which the MS shall initiate a Layer 2 disconnection process on the main signalling link. After the acknowledgement of the Layer 2 disconnection by the SS, the MS shall stop transmission of Layer 2 messages. This is verified for 3 s. The MS shall return to the idle state, which is verified through the paging procedure to which the MS shall respond.
Maximum Duration of Test
20 s.
Expected Sequence
Step
Direction
Message
Comments
1
SS -> MS
PAGING REQUEST TYPE 1
2
MS -> SS
CHANNEL REQUEST
Establ. Cause = "Answer to paging".
3
SS -> MS
IMMEDIATE ASSIGNMENT
Channel Type = SDCCH/8
4
MS -> SS
PAGING RESPONSE
5
SS -> MS
CHANNEL RELEASE
With a valid RR cause value.
6
MS -> SS
DISC
The MS may send the DISC message without performing a layer 2 acknowledgement of the CHANNEL RELEASE message.
7
SS -> MS
UA
--------
--------
The SS verifies for 3 s that the MS does not produce any Layer 2 messages.
--------
--------
The SS waits 12 s to allow the MS to perform cell reselection.
8
SS -> MS
PAGING REQUEST TYPE 1
9
MS -> SS
CHANNEL REQUEST
Establ. Cause = "Answer to paging".
10
SS -> MS
IMMEDIATE ASSIGNMENT
11
MS -> SS
PAGING RESPONSE
12
SS -> MS
CHANNEL RELEASE
Specific Message Contents
None.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.12.2 Channel release / SDCCH - no L2 ACK
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.12.2.1 Conformance requirements
|
After the expiry of timer T3110 the MS shall not produce any further RF-transmission.
References
3GPP TS 04.08 / 3GPP TS 44.018 subclause 3.4.13.1.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.12.2.2 Test purpose
|
To verify that the MS is able to correctly release a SDCCH after having received a CHANNEL RELEASE message, even if the SS does not L2 acknowledge the L2 DISC frame.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.12.2.3 Method of test
|
Initial Conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in the "idle, updated" state, with a TMSI allocated.
Specific PICS statements
-
PIXIT statements
-
Foreseen Final State of the MS
"Idle, updated", with TMSI allocated.
Test Procedure
The MS is paged and allocated a dedicated channel and the Layer 2 signalling link is established. The SS then sends a CHANNEL RELEASE message, after which the MS shall send at least 2 L2 DISC frames. The SS does not acknowledge any of the L2 DISC frames. After 2 s, the SS verifies for 3 s that the MS has stopped transmission of Layer 2 messages. The MS shall return to the idle state, which is verified through the paging procedure to which the MS shall respond.
Maximum Duration of Test
25 s.
Expected Sequence
Step
Direction
Message
Comments
1
SS -> MS
PAGING REQUEST TYPE 1
2
MS -> SS
CHANNEL REQUEST
Establ. Cause = "Answer to paging".
3
SS -> MS
IMMEDIATE ASSIGNMENT
Channel Type = SDCCH/8.
4
MS -> SS
PAGING RESPONSE
5
SS -> MS
CHANNEL RELEASE
With a valid RR cause value.
6
MS -> SS
DISC
The MS may send the DISC message without performing a layer 2 acknowledgement of the CHANNEL RELEASE message.
The MS shall send at least 2 L2 DISC frames, to which the SS does not respond. After a period of 2 s, the SS verifies for 3 s that the MS does not produce any further Layer 2 messages.
--------
--------
The SS waits 12 s to allow the MS to perform cell reselection.
7
SS -> MS
PAGING REQUEST TYPE 1
8
MS -> SS
CHANNEL REQUEST
Establ. Cause = "Answer to paging".
9
SS -> MS
IMMEDIATE ASSIGNMENT
10
MS -> SS
PAGING RESPONSE
11
SS -> MS
CHANNEL RELEASE
Specific Message Contents
None.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.12.3 Channel release / TCH-F
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.12.3.1 Conformance requirements
|
After the acknowledgement of the Layer 2 disconnection by the network the MS shall not produce any further RF-transmission.
References
3GPP TS 04.08 / 3GPP TS 44.018 subclause 3.4.13.1.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.12.3.2 Test purpose
|
To verify that the MS is able to correctly release a full-rate TCH after having received a CHANNEL RELEASE message.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.12.3.3 Method of test
|
Initial Conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in the "idle, updated" state, with a TMSI allocated.
Specific PICS statements
-
PIXIT statements
-
Foreseen Final State of the MS
"Idle, updated", with TMSI allocated.
Test Procedure
The MS is paged and allocated a dedicated channel and the Layer 2 signalling link is established. The SS then sends a CHANNEL RELEASE message, after which the MS shall initiate a Layer 2 disconnection process on the main signalling link. After the acknowledgement of the Layer 2 disconnection by the SS, the MS shall stop transmission of Layer 2 messages. This is verified for 3 s. The MS shall return to the idle state, which is verified through the paging procedure to which the MS shall respond.
Maximum Duration of Test
20 s.
Expected Sequence
Step
Direction
Message
Comments
1
SS -> MS
PAGING REQUEST TYPE 1
2
MS -> SS
CHANNEL REQUEST
Establ. Cause = "Answer to paging".
3
SS -> MS
IMMEDIATE ASSIGNMENT
Channel Type = "Bm + ACCHs"
4
MS -> SS
PAGING RESPONSE
5
SS -> MS
CHANNEL RELEASE
With a valid RR cause value.
6
MS -> SS
DISC
The MS may send the DISC message without performing a layer 2 acknowledgement of the CHANNEL RELEASE message.
7
SS -> MS
UA
--------
--------
The SS verifies for 3 s that the MS does not produce any Layer 2 messages.
--------
--------
The SS waits 12 s to allow the MS to perform cell reselection.
8
SS -> MS
PAGING REQUEST TYPE 1
9
MS -> SS
CHANNEL REQUEST
Establ. Cause = "Answer to paging".
10
SS -> MS
IMMEDIATE ASSIGNMENT
11
MS -> SS
PAGING RESPONSE
12
SS -> MS
CHANNEL RELEASE
Specific Message Contents
None.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.12.4 Channel release / TCH-F - no L2 ACK
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.12.4.1 Conformance requirements
|
After the expiry of timer T3110 the MS shall not produce any further RF-transmission.
References
3GPP TS 04.08 / 3GPP TS 44.018 subclause 3.4.13.1
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.12.4.2 Test purpose
|
To verify that the MS is able to correctly release a TCH/F after having received a CHANNEL RELEASE message, even if the SS does not L2 acknowledge the L2 DISC frame.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.12.4.3 Method of test
|
Initial Conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in the "idle, updated" state, with a TMSI allocated.
Specific PICS statements
-
PIXIT statements
-
Foreseen Final State of the MS
"Idle, updated", with TMSI allocated.
Test Procedure
The MS is paged and allocated a dedicated channel and the Layer 2 signalling link is established. The SS then sends a CHANNEL RELEASE message (with cause "abnormal release, unspecified"), after which the MS shall send at least 2 L2 DISC frames. The SS does not acknowledge any of the L2 DISC frames. After 2 s, the SS verifies for 3 s that the MS has stopped transmission of Layer 2 messages. The MS shall return to the idle state, which is verified through the paging procedure to which the MS shall respond.
Maximum Duration of Test
25 s.
Expected Sequence
Step
Direction
Message
Comments
1
SS -> MS
PAGING REQUEST TYPE 1
2
MS -> SS
CHANNEL REQUEST
Establ. Cause = "Answer to paging".
3
SS -> MS
IMMEDIATE ASSIGNMENT
Channel Type = "Bm + ACCHs".
4
MS -> SS
PAGING RESPONSE
5
SS -> MS
CHANNEL RELEASE
Cause value = "Abnormal release, unspecified".
6
MS -> SS
DISC
The MS may send the DISC message without performing a layer 2 acknowledgement of the CHANNEL RELEASE message.
The MS shall send at least 2 L2 DISC frames, to which the SS does not respond. After a period of 2 s, the SS verifies for 3 s that the MS does not produce any further Layer 2 messages.
-
-
The SS waits 12 s to allow the MS to perform cell reselection.
7
SS -> MS
PAGING REQUEST TYPE 1
8
MS -> SS
CHANNEL REQUEST
Establ. Cause = "Answer to paging".
9
SS -> MS
IMMEDIATE ASSIGNMENT
Channel Type = SDCCH/8.
10
MS -> SS
PAGING RESPONSE
11
SS -> MS
CHANNEL RELEASE
Specific Message Contents
None.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.13 Test of starting time
|
The Assignment, Handover and immediate assignment procedures can include a delayed change of frequency list, MAIO and HSN. This series of tests checks the behaviour of the Mobile Station when receiving channel allocation messages with a starting time and channel description for both before and after the starting time. Tests checking the phase 1 usage of the starting time (that is without a channel description for before the time) are included in the series related to immediate assignment, dedicated assignment and handover.
Throughout subclause 26.6.13 the defaults in the following subclauses
Table 26.6
Band
Defaults sub-clause
GSM 450
26.6.16
GSM 480
26.6.17
GSM 710
26.6.21
GSM 750
26.6.19
T-GSM 810
26.6.22
GSM 850
26.6.20
GSM 900
26.6.14
DCS 1 800
26.6.15
PCS 1 900
26.6.18
are used with the following exceptions:
Contents of IMMEDIATE ASSIGNMENT message, unless otherwise defined in the individual test cases:
L2 pseudo length
This is the sum of the lengths of all the information elements present in the message except for the IA rest octets and L2 pseudo length IEs. For the default message the L2 pseudo length is 11.
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00111111
Page Mode
- Page Mode
Normal Paging.
Channel Description
- Channel Type and TDMA offset
Chosen arbitrarily (see initial conditions).
- Timeslot Number
Chosen arbitrarily by the test house;
- Training Sequence Code
Chosen arbitrarily by the test house
- Hopping
Yes.
- Hopping parameters
Chosen arbitrarily.
Request Reference
Pertaining to last Channel Request sent by the MS.
Timing Advance
- Timing advance value
30 bit periods.
Mobile Allocation
Chosen arbitrarily, at least one frequency. In case of an MA with just one frequency, the frequency should be different from the BCCH carrier.
Starting Time
Not present.
IA rest octets
Not used (all bits set to spare).
Two cells are defined:
Band
Cell A
Cell B
CA Coding format – both cells
BCCH ARFCN
Cell allocation
BCCH ARFCN
Cell allocation
GSM 450
263
259, 261, 263, 265, 267, 269, 271, 273, 275, 277, 279, 281, 283, 285, 287, 289, 291
274
260, 262, 264, 266, 268, 270, 272, 274, 276, 279, 281, 283, 285, 287, 289, 291
Range 128
GSM 480
310
306, 308, 310, 312, 314, 316, 318, 320, 322, 324, 326, 328, 330, 332, 334, 336, 338
321
307, 309, 311, 313, 315, 317, 319, 321, 323, 326, 328, 330, 332, 334, 336, 338
Range 128
GSM 710
457
447, 454, 457, 463, 471, 479, 482 ,483 ,489, 496, 498, 500, 501, 502, 503, 506, 508
477
451, 455, 459, 461, 467, 468, 475, 477, 497, 498, 500, 501, 502, 503, 506, 508
Range 128
GSM 750
457
447, 454, 457, 463, 471, 479, 482 ,483 ,489, 496, 498, 500, 501, 502, 503, 506, 508
477
451, 455, 459, 461, 467, 468, 475, 477, 497, 498, 500, 501, 502, 503, 506, 508
Range 128
T-GSM 810
457
447, 454, 457, 463, 471, 479, 482 ,483 ,489, 496, 498, 500, 501, 502, 503, 506, 508
477
451, 455, 459, 461, 467, 468, 475, 477, 497, 498, 500, 501, 502, 503, 506, 508
Range 128
GSM 850
147
137, 144, 147, 153, 161, 169, 172, 173, 179, 186, 193, 200, 201, 202, 203, 235, 241
167
141, 145, 149, 151, 157, 158, 165, 167, 187, 193, 200, 201, 202, 203, 235, 241
Range 128
GSM 900
20
10, 17, 20, 26, 34, 42, 45, 46, 52, 59, 66, 73, 74, 75, 76, 108, 114
40
14, 18, 22, 24, 30, 31, 38, 40, 60, 66, 73, 74, 75, 76, 108, 114
Bitmap 0
DCS 1 800
747
737, 741, 747, 754, 759, 762, 766, 767, 773, 775, 779, 782, 791, 798, 829, 832, 844
764
739, 743, 746, 749, 756, 758, 761, 764, 771, 779, 782, 791, 798, 829, 832, 844
Range 256
PCS 1 900
647
637, 641, 647, 654, 659, 662, 666, 667, 673, 675, 679, 682, 691, 698, 729, 732, 744
664
639, 643, 646, 649, 656, 658, 661, 664, 671, 679, 682, 691, 698, 729, 732, 744
Range 256
For DCS 1 800, PCS 1 900 the BCCH ARFCNs shall be added to the default BA-List.
For all other bands the BCCH ARFCNs are already included in the default BA-List.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.13.1 Dedicated assignment with starting time / successful case / time not elapsed
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.13.1.1 Conformance requirement
|
A Mobile Station receiving an ASSIGNMENT COMMAND message with a starting time and channel descriptions for both after and before the starting time, and ready to access before the indicated time has elapsed, shall perform the assignment on the channels as described for before the starting time and shall start using the new frequency parameters (frequencies and hopping sequence, or single frequency) in the correct time slot indicated by the starting time.
The Mobile Station shall accept the ASSIGNMENT COMMAND message for different message formatting, differing by the information elements used to describe frequency lists.
Reference(s)
3GPP TS 04.08 / 3GPP TS 44.018 subclauses 3.4.3.1 and 9.1.2.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.13.1.2 Test purpose
|
To verify that the MS, after receiving an ASSIGNMENT COMMAND message with a starting time and channel descriptions both for before and after the starting time, and ready to access before the indicated time, performs correctly the assignment using the description for before the time, and eventually starts using the frequency parameters for after the time at the time indicated in the message.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.13.1.3 Method of test
|
Initial condition(s)
System Simulator:
1 cell, CCCH_CONF set to 1 basic physical channel used for CCCH, not combined with SDCCHs.
Mobile Station:
The MS is in the "idle, updated" state, with a TMSI allocated.
Specific PICS statements
- MS supports only SDCCH (TSPC_AddInfo_SDCCHOnly)
- MS supports GSM HR (TSPC_AddInfo_Halfrate)
PIXIT statements
-
Foreseen final state of the MS
"Idle, updated", with TMSI allocated.
Test procedure
The System Simulator pages the MS and after the MS has responded with a CHANNEL REQUEST, the simulator assigns a hopping SDCCH. Then the SS sends an ASSIGNMENT COMMAND message allocating a channel (TCH/F, TCH/H or SDCCH, arbitrarily chosen among the channels supported), with a starting time and channel descriptions (hopping case) for both before and after the starting time, as detailed in the "specific message contents" clause. The indicated time is such that the Mobile Station is ready to access before that time. The Mobile Station then accesses the channel as described for before the starting time. The MS shall eventually, at the TDMA frame defined by the contents of the "Starting Time" information element of the ASSIGNMENT COMMAND message, use the new frequency parameters . The verification is performed at the RF burst level.
Test parameters:
T1 is set to T0+1000 (mod 42 432), where T0 is the frame number at which the first burst of the ASSIGNMENT COMMAND message is sent.
Maximum duration of test
45 s.
Expected sequence
Step
Direction
Message
Comments
1
SS -> MS
PAGING REQUEST TYPE 1
2
MS -> SS
CHANNEL REQUEST
3
SS -> MS
IMMEDIATE ASSIGNMENT
Hopping channel.
4
MS -> SS
PAGING RESPONSE
5
SS -> MS
ASSIGNMENT COMMAND
See specific message contents.
6
MS -> SS
ASSIGNMENT COMPLETE
Sent on the correct channel (before time parameters) after establishment of the main signalling link.
7
--------
Time T1
The SS checks that the MS is transmitting now on the correct frequencies (after time parameters) and that the transmission started in the correct frame.
8
SS -> MS
CHANNEL RELEASE
Specific message contents
ASSIGNMENT COMMAND
Information element
Value/remark
Channel Description, after time
Channel Type and TDMA offset
Chosen arbitrarily among that supported by the Mobile Station.
Timeslot Number
Chosen arbitrarily.
Training Sequence Code
Chosen arbitrarily.
Hopping
Yes.
Hopping parameters
Chosen arbitrarily.
Power Command
Power level
Chosen arbitrarily.
Channel Mode
Mode
Signalling Only.
Mobile Allocation, after time
Chosen arbitrarily, at least one frequency. In case of an MA with just one frequency, the frequency should be different from the BCCH carrier.
Starting Time
T1
Channel Description, before time
Channel Type and TDMA offset
Same as after time.
Timeslot Number
Same as after time.
Training Sequence Code
Same as after time.
Hopping
Yes.
Hopping parameters
Chosen arbitrarily, different from "after time".
Mobile Allocation, before time
Chosen arbitrarily, at least one frequency and different from "Mobile Allocation, after time". In case of an MA with just one frequency, the frequency should be different from the BCCH carrier.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.13.2 Dedicated assignment with starting time / successful case / time elapsed
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.13.2.1 Conformance requirement
|
A Mobile Station receiving an ASSIGNMENT COMMAND message with a starting time and channel descriptions for both after and before the starting time, and ready to access after the indicated time has elapsed, shall perform the assignment on the channels as described for after the starting time.
The Mobile Station shall accept the ASSIGNMENT COMMAND message for different message formattings, differing by the information elements used to describe frequency lists.
Reference(s):
3GPP TS 04.08 / 3GPP TS 44.018 subclauses 3.4.3.1 and 9.1.2.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.13.2.2 Test purpose
|
To verify that the MS, after receiving an ASSIGNMENT COMMAND message with a starting time and channel descriptions both for before and after the starting time, performs correctly the assignment using the frequency parameters for after the time if the indicated time has already elapsed when the Mobile Station is ready to transmit.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.13.2.3 Method of test
|
Initial condition(s)
System Simulator:
1 cell, CCCH_CONF set to 1 basic physical channel used for CCCH, not combined with SDCCHs.
Mobile Station:
The MS is in the "idle, updated" state, with a TMSI allocated.
Specific PICS statements
- MS supports only SDCCH (TSPC_AddInfo_SDCCHOnly)
- MS supports GSM HR (TSPC_AddInfo_Halfrate)
PIXIT statements
-
Foreseen final state of the MS
"Idle, updated", with TMSI allocated.
Test procedure
The System Simulator pages the MS and after the MS has responded with a CHANNEL REQUEST, the simulator assigns a hopping SDCCH. Then the SS sends an ASSIGNMENT COMMAND message allocating a channel (TCH/F, TCH/H or SDCCH, arbitrarily chosen among the channels supported), with a starting time and channel descriptions (hopping case) for both before and after the starting time, as detailed in the "specific message contents" clause. The indicated time is such that the Mobile Station is ready to access only after that time. The Mobile Station then accesses the channel as described for after the starting time. The verification is performed at the RF burst level.
Test parameters:
T1 is set to T0+5 (mod 42 432), where T0 is the frame number at which the first burst of the ASSIGNMENT COMMAND message is sent.
Maximum duration of test
45 s.
Expected sequence
Step
Direction
Message
Comments
1
SS -> MS
PAGING REQUEST TYPE 1
2
MS -> SS
CHANNEL REQUEST
Hopping channel.
3
SS -> MS
IMMEDIATE ASSIGNMENT
4
MS -> SS
PAGING RESPONSE
5
SS -> MS
ASSIGNMENT COMMAND
See specific message contents.
6
MS -> SS
ASSIGNMENT COMPLETE
Sent on the correct channel (after time parameters) after establishment of the main signalling link.
7
SS -> MS
CHANNEL RELEASE
Specific message contents
ASSIGNMENT COMMAND
Information element
Value/remark
Channel Description, after time
Channel Type and TDMA offset
Chosen arbitrarily among that supported by the Mobile Station.
Timeslot Number
Chosen arbitrarily.
Training Sequence Code
Chosen arbitrarily.
Hopping
Yes.
Hopping parameters
Chosen arbitrarily.
Power Command
Power level
Chosen arbitrarily.
Channel Mode
Mode
Signalling Only.
Mobile Allocation, after time
Chosen arbitrarily, at least one frequency. In case of an MA with just one frequency, the frequency should be different from the BCCH carrier.
Starting Time
T1
Channel Description, before time
Channel Type and TDMA offset
Same as after time.
Timeslot Number
Same as after time.
Training Sequence Code
Same as after time.
Hopping
Yes.
Hopping parameters
Chosen arbitrarily, different from "after time".
Mobile Allocation, before time
Chosen arbitrarily, at least one frequency and different from "Mobile Allocation, after time". In case of an MA with just one frequency, the frequency should be different from the BCCH carrier.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.13.3 Dedicated assignment with starting time and frequency redefinition / failure case / time not elapsed
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.13.3.1 Conformance requirement
|
An MS, after receiving a FREQUENCY REDEFINITION message, shall keep the provided information until the time is elapsed. The Mobile Station must accept an intervening dedicated assignment, and, in case of failure of this assignment resulting in a return to the old channel before the time indicated in the FREQUENCY REDEFINITION message, shall return on the old channel with the frequency parameters in use at the moment of the reception of the FREQUENCY REDEFINITION message, and shall eventually start using the new frequency parameters in the correct time slot indicated by the starting time of the FREQUENCY REDEFINITION message.
Reference(s):
3GPP TS 04.08 / 3GPP TS 44.018 subclauses 3.4.3 and 3.4.5.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.13.3.2 Test purpose
|
To verify that the MS, after receiving a FREQUENCY REDEFINITION and then an ASSIGNMENT COMMAND message with a starting time and channel descriptions both for before and after the starting time, failing the assignment and returning on the old channel, and ready to access before the time indicated in the FREQUENCY REDEFINITION, resumes transmission on the channels used at the time of the reception of the FREQUENCY REDEFINITION message and eventually starts using the new frequency parameters at the time indicated in the FREQUENCY REDEFINITION message.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.13.3.3 Method of test
|
Initial condition(s)
System Simulator:
1 cell, CCCH_CONF set to 1 basic physical channel used for CCCH, not combined with SDCCHs.
Mobile Station:
The MS is in the "idle, updated" state, with a TMSI allocated.
Specific PICS statements
- MS supports only SDCCH (TSPC_AddInfo_SDCCHOnly)
- MS supports GSM HR (TSPC_AddInfo_Halfrate)
PIXIT statements
-
Foreseen final state of the MS
"Idle, updated", with TMSI allocated.
Test procedure
The System Simulator pages the MS and after the MS has responded with a CHANNEL REQUEST, the simulator assigns allocating a hopping channel (TCH/F, TCH/H or SDCCH, arbitrarily chosen among the channels supported). Then the SS sends a FREQUENCY REDEFINITION message (starting time T1), which modifies the frequency parameters to be used by the MS. Then the SS sends an ASSIGNMENT COMMAND message, with a starting time (T2) and channel descriptions for both before and after the starting time. The channels and hopping sequences so allocated are distinct from those used and from those described by the FREQUENCY REDEFINITION message. The System Simulator does not activate the channels defined in the ASSIGNMENT COMMAND. The MS shall try to activate the new channel (this is not verified) and shall then reactivate the old channel and trigger the establishment of the main signalling link on the old channel. Then the MS shall send an ASSIGNMENT FAILURE message. Time T1 is chosen so it is reached only after the sending of the ASSIGNMENT FAILURE message. The MS shall eventually, at the TDMA frame defined by the contents of the "Starting Time" information element of the FREQUENCY REDEFINITION message, use the new frequency parameters. The verification is performed at the RF burst level.
Test parameters:
T1 is set to T0+5000 (mod 42 432), where T0 is the frame number at which the first burst of the FREQUENCY REDEFINITION message is sent.
T2 is set to T0+4000 (mod 42 432), where T0 is the frame number at which the first burst of the FREQUENCY REDEFINITION message is sent.
Maximum duration of test
180 s.
Expected sequence
Step
Direction
Message
Comments
1
SS -> MS
PAGING REQUEST TYPE 1
2
MS -> SS
CHANNEL REQUEST
3
SS -> MS
IMMEDIATE ASSIGNMENT
Hopping channel.
4
MS -> SS
PAGING RESPONSE
4A
SS -> MS
IDENTITY REQUEST
Identity type : IMSI
4B
MS -> SS
IDENTITY RESPONSE
The response is not checked by the SS
5
SS -> MS
FREQUENCY REDEFINITION
6
SS -> MS
ASSIGNMENT COMMAND
Hopping channel, type among possible, signalling mode.
7
MS -> SS
ASSIGNMENT FAILURE
Sent on the correct channel (original parameters) after establishment of the main signalling link.
8
--------
Time T1
The SS checks that the MS is transmitting now on the correct frequencies (parameters of the FREQUENCY REDEFINITION message) and that the transmissions started in the correct frame.
9
SS -> MS
CHANNEL RELEASE
Specific message contents
FREQUENCY REDEFINITION
Information element
Value/remark
Channel Description
Channel Type and TDMA offset
Same as in IMMEDIATE ASSIGNMENT
Timeslot Number
Same as in IMMEDIATE ASSIGNMENT
Training Sequence Code
Same as in IMMEDIATE ASSIGNMENT
Hopping
Yes
Hopping parameters
Chosen arbitrarily, different than those of the IMMEDIATE ASSIGNMENT message,
HSN same as in IMMEDIATE ASSIGNMENT.
Mobile Allocation
Chosen arbitrarily, at least two frequencies, different than those of the IMMEDIATE ASSIGNMENT message.
Starting Time
T1
ASSIGNMENT COMMAND:
Information element
Value/remark
Channel Description, after time
Channel Type and TDMA offset
Chosen arbitrarily among that supported by the Mobile Station.
Timeslot Number
Chosen arbitrarily.
Training Sequence Code
Chosen arbitrarily.
Hopping
Yes.
Hopping parameters
Chosen arbitrarily.
Power Command
Power level
Chosen arbitrarily.
Channel Mode
Mode
Signalling Only.
Mobile Allocation, after time
Chosen arbitrarily, at least two frequency.
Starting Time
T2
Channel Description, before time
Channel Type and TDMA offset
Same as after time.
Timeslot Number
Same as after time.
Training Sequence Code
Same as after time.
Hopping
Yes.
Hopping parameters
Chosen arbitrarily, different from "after time".
Mobile Allocation, before time
Chosen arbitrarily, at least two frequencies, different from "Mobile Allocation, after time".
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.13.4 Dedicated assignment with starting time and frequency redefinition / failure case / time elapsed
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.13.4.1 Conformance requirement
|
An MS, after receiving a FREQUENCY REDEFINITION message, shall keep the provided information until the time is elapsed. The Mobile Station must accept an intervening dedicated assignment, and, in case of failure of this assignment resulting in a return to the old channel after the time indicated in the FREQUENCY REDEFINITION message, shall return on the old channel with the frequency parameters indicated in the FREQUENCY REDEFINITION message.
Reference(s):
3GPP TS 04.08 / 3GPP TS 44.018 subclauses 3.4.3 and 3.4.5.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.13.4.2 Test purpose
|
To verify that the MS, after receiving a FREQUENCY REDEFINITION and then an ASSIGNMENT COMMAND message with a starting time and channel descriptions both for before and after the starting time, failing the assignment and returning on the old channel, and ready to access after the time indicated in the FREQUENCY REDEFINITION, resumes transmission using the new frequency parameters indicated in the FREQUENCY REDEFINITION message.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.13.4.3 Method of test
|
Initial condition(s)
System Simulator:
1 cell, CCCH_CONF set to 1 basic physical channel used for CCCH, not combined with SDCCHs.
Mobile Station:
The MS is in the "idle, updated" state, with a TMSI allocated.
Specific PICS statements
-
PIXIT statements
-
Foreseen final state of the MS
"Idle, updated", with TMSI allocated.
Test procedure
The System Simulator pages the MS and after the MS has responded with a CHANNEL REQUEST, the simulator assigns allocating a hopping channel (SDCCH). Then the SS sends a FREQUENCY REDEFINITION message (starting time T1), which modifies the frequency parameters to be used by the MS. Then the SS sends an ASSIGNMENT COMMAND message, with a starting time (T2) and channel descriptions for both before and after the starting time. Time T1 is chosen so it is reached after the sending of the ASSIGNMENT COMMAND message, but before the return on the old channel. The System Simulator does not activate the channels defined in the ASSIGNMENT COMMAND. The MS shall try to activate the new channel (this is not verified) and shall then reactivate the old channel with the new frequency parameters as indicated by the FREQUENCY REDEFINITION message, and trigger the establishment of the main signalling link on the old channel. Then the MS shall send an ASSIGNMENT FAILURE message. The verification is performed at the RF burst level.
Test parameters:
i.e. for SDCCH
T2 is set to T0+5000 (mod 42 432), where T0 is the frame number at which the first burst of the FREQUENCY REDEFINITION message is sent.
T1 is set to T0+214 (mod 42 432), where T0 is the frame number at which the first burst of the FREQUENCY REDEFINITION message is sent.
NOTE: T0 + 214 is calculated for a maximum execution time of:
FREQUENCY REDEFINITION using 1 L2 frame 51 frames
ASSIGNMENT COMMAND using 2 L2 frames 102 frames
+ 120 ms maximum time for a channel change 25 frames
+ some frames conention (here 36)
Maximum duration of test
180 s.
Expected sequence
Step
Direction
Message
Comments
1
SS -> MS
PAGING REQUEST TYPE 1
2
MS -> SS
CHANNEL REQUEST
3
SS -> MS
IMMEDIATE ASSIGNMENT
Hopping channel.
4
MS -> SS
PAGING RESPONSE
5
SS -> MS
FREQUENCY REDEFINITION
6
SS -> MS
ASSIGNMENT COMMAND
Hopping channel, type among possible, signalling mode.
7
MS -> SS
ASSIGNMENT FAILURE
Sent on the correct channel (parameters from the FREQUENCY REDEFINITION message) after establishment of the main signalling link.
8
SS -> MS
CHANNEL RELEASE
Specific message contents
FREQUENCY REDEFINITION
Information element
Value/remark
Channel Description
Channel Type and TDMA offset
Same as in IMMEDIATE ASSIGNMENT
Timeslot Number
Same as in IMMEDIATE ASSIGNMENT
Training Sequence Code
Same as in IMMEDIATE ASSIGNMENT
Hopping
Yes
Hopping parameters
Chosen arbitrarily, different than those of the IMMEDIATE ASSIGNMENT message.
Mobile Allocation
Chosen arbitrarily, at least two frequencies, different than those of the IMMEDIATE ASSIGNMENT message, HSN same as in IMMEDIATE ASSIGNMENT.
Starting Time
T1
ASSIGNMENT COMMAND
Information element
Value/remark
Channel Description, after time
Channel Type and TDMA offset
Chosen arbitrarily among that supported by the Mobile Station.
Timeslot Number
Chosen arbitrarily.
Training Sequence Code
Chosen arbitrarily.
Hopping
Yes.
Hopping parameters
Chosen arbitrarily.
Power Command
Power level
Chosen arbitrarily.
Channel Mode
Mode
Signalling Only.
Mobile Allocation, after time
Chosen arbitrarily, at least two frequencies.
Starting Time
T2
Channel Description, before time
Channel Type and TDMA offset
Same as after time.
Timeslot Number
Same as after time.
Training Sequence Code
Same as after time.
Hopping
Yes.
Hopping parameters
Chosen arbitrarily, different from "after time".
Mobile Allocation, before time
Chosen arbitrarily, at least two frequencies, different from "Mobile Allocation, after time".
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.13.5 Handover with starting time / successful case / time not elapsed
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.13.5.1 Conformance requirement
|
A Mobile Station receiving an HANDOVER COMMAND message with a starting time and channel descriptions for both after and before the starting time, and ready to access before the indicated time has elapsed, shall perform the handover on the channels as described for before the starting time and shall, if specified, use the parameters in the frequency list, MAIO and HSN, in the correct time slot indicated by the starting time.
The Mobile Station shall accept the HANDOVER COMMAND message for different message formatting, differing by the information elements used to describe frequency lists.
Reference(s):
3GPP TS 04.08 / 3GPP TS 44.018 subclauses 3.4.4.1 and 9.1.15.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.13.5.2 Test purpose
|
To verify that the MS, after receiving a HANDOVER COMMAND message with a starting time and channel descriptions both for before and after the starting time, and ready to access before the indicated time, performs correctly the handover using the description for before the time, and then starts using the frequency parameters for after the time at the time indicated in the message.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.13.5.3 Method of test
|
Initial condition(s)
System Simulator:
2 cells, CCCH_CONF set to 1 basic physical channel used for CCCH, not combined with SDCCHs.
Mobile Station:
The MS is in the "idle, updated" state, with a TMSI allocated.
Specific PICS statements
- MS supports only SDCCH (TSPC_AddInfo_SDCCHOnly)
- MS supports GSM HR (TSPC_AddInfo_Halfrate)
PIXIT statements
-
Foreseen final state of the MS
"Idle, updated", with TMSI allocated, and camped on cell B.
Test procedure
The System Simulator pages the MS and after the MS has responded with a CHANNEL REQUEST, the simulator assigns a hopping SDCCH. After the SS has received measurements concerning cell B, the SS sends a HANDOVER COMMAND message allocating a channel (TCH/F, TCH/H or SDCCH, arbitrarily chosen among the channels supported), with a starting time and channel descriptions (hopping case) for both before and after the starting time , as detailed in the "specific message contents" clause. The indicated time is such that the Mobile Station is ready to access before that time. The Mobile Station then accesses the channel as described for before the starting time. The MS shall eventually, at the TDMA frame defined by the contents of the "Starting Time" information element of the HANDOVER COMMAND message, use the new frequency parameters. The verification is performed at the RF burst level.
Test parameters:
T1 is set to T0+1000 (mod 42 432), where T0 is the frame number at which the first burst of the HANDOVER COMMAND message is sent.
Maximum duration of test
120 s.
Expected sequence
Step
Direction
Message
Comments
1
SS -> MS
PAGING REQUEST TYPE 1
2
MS -> SS
CHANNEL REQUEST
3
SS -> MS
IMMEDIATE ASSIGNMENT
Hopping channel.
4
MS -> SS
PAGING RESPONSE
5
SS -> MS
HANDOVER COMMAND
See specific message contents.
6
MS -> SS
HANDOVER ACCESS
Repeated on every burst of the uplink main DCCH (and optionally on the SACCH) until reception of PHYSICAL INFORMATION.
7
SS -> MS
PHYSICAL INFORMATION
8
MS -> SS
HANDOVER COMPLETE
Sent on the correct channel (before time parameters) after establishment of the main signalling link.
9
--------
Time T1
The SS checks that the MS is transmitting now on the correct frequencies (after time parameters) and that the transmissions started in the correct frame.
10
SS -> MS
CHANNEL RELEASE
Specific message contents
HANDOVER COMMAND:
Information element
Value/remark
Cell Description
As for cell B.
Channel Description, after time
Channel Type and TDMA offset
Chosen arbitrarily among that supported by the Mobile Station.
Timeslot Number
Chosen arbitrarily.
Training Sequence Code
Chosen arbitrarily.
Hopping
Yes.
Hopping parameters
Chosen arbitrarily.
Power Command
Power level
Chosen arbitrarily.
Synchronization indication
Non synchronized.
Cell Channel Description
As for cell B.
Channel Mode
Mode
Signalling Only.
Mobile Allocation, after time
Chosen arbitrarily, at least one frequency. In case of an MA with just one frequency, the frequency should be different from the BCCH carrier.
Starting Time
T1
Channel Description, before time
Channel Type and TDMA offset
Same as after time.
Timeslot Number
Same as after time.
Training Sequence Code
Same as after time.
Hopping
Yes.
Hopping parameters
Chosen arbitrarily, different from "after time".
Mobile Allocation, before time
Chosen arbitrarily, at least one frequency, different from "Mobile Allocation, after time". In case of an MA with just one frequency, the frequency should be different from the BCCH carrier.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.13.6 Handover with starting time / successful case / time elapsed
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.13.6.1 Conformance requirement
|
A Mobile Station receiving a HANDOVER COMMAND message with a starting time and channel descriptions for both after and before the starting time, and ready to access after the indicated time has elapsed, shall perform the handover on the channels as described for after the starting time.
The Mobile Station shall accept the HANDOVER COMMAND message for different message formattings, differing by the information elements used to describe frequency lists.
Reference(s):
3GPP TS 04.08 / 3GPP TS 44.018 sub-clauses 3.4.4.1 and 9.1.15.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.13.6.2 Test purpose:
|
To verify that the MS, after receiving a HANDOVER COMMAND message with a starting time and channel descriptions both for before and after the starting time, and ready to transmit after the indicated time, performs correctly the handover using the frequency parameters for after the time.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.13.6.3 Method of test
|
Initial condition(s)
System Simulator:
2 cells, CCCH_CONF set to 1 basic physical channel used for CCCH, not combined with SDCCHs.
Mobile Station:
The MS is in the "idle, updated" state, with a TMSI allocated, and camped on cell A
Specific PICS statements
- MS supports only SDCCH (TSPC_AddInfo_SDCCHOnly)
- MS supports GSM HR (TSPC_AddInfo_Halfrate)
PIXIT statements
-
Foreseen final state of the MS
"Idle, updated", with TMSI allocated, and camped on cell B.
Test procedure
The System Simulator pages the MS and after the MS has responded with a CHANNEL REQUEST, the simulator assigns a hopping SDCCH. After the SS has received measurements concerning cell B, the SS sends a HANDOVER COMMAND message allocating a channel (TCH/F, TCH/H or SDCCH, arbitrarily chosen among the channels supported), with a starting time and channel descriptions (hopping case) for both before and after the starting time., as detailed in the "specific message contents" clause. The indicated time is such that the Mobile Station is ready to access only after that time. The Mobile Station then accesses the channel as described for after the starting time. The verification is performed at the RF burst level.
Test parameters:
T1 is set to T0+5 (mod 42 432), where T0 is the frame number at which the first burst of the HANDOVER COMMAND message is sent.
Maximum duration of test
120 s.
Expected sequence
Step
Direction
Message
Comments
1
SS -> MS
PAGING REQUEST TYPE 1
2
MS -> SS
CHANNEL REQUEST
3
SS -> MS
IMMEDIATE ASSIGNMENT
Hopping channel.
4
MS -> SS
PAGING RESPONSE
5
SS -> MS
HANDOVER COMMAND
See specific message contents.
6
MS -> SS
HANDOVER ACCESS
Repeated on every burst of the uplink main DCCH (and optionally on the SACCH) until reception of PHYSICAL INFORMATION.
7
SS -> MS
PHYSICAL INFORMATION
8
MS -> SS
HANDOVER COMPLETE
Sent on the correct channel (after time parameters) after establishment of the main signalling link.
9
SS -> MS
CHANNEL RELEASE
Specific message contents
HANDOVER COMMAND:
Information element
Value/remark
Cell Description
As for cell B.
Channel Description, after time
Channel Type and TDMA offset
Chosen arbitrarily among that supported by the Mobile Station.
Timeslot Number
Chosen arbitrarily.
Training Sequence Code
Chosen arbitrarily.
Hopping
Yes.
Hopping parameters
Chosen arbitrarily.
Power Command
Power level
Chosen arbitrarily.
Synchronization indication
Non synchronized.
Cell Channel Description
As for cell B.
Channel Mode
Mode
Signalling Only.
Mobile Allocation, after time
Chosen arbitrarily, at least one frequency. In case of an MA with just one frequency, the frequency should be different from the BCCH carrier.
Starting Time
T1
Channel Description, before time
Channel Type and TDMA offset
Same as after time.
Timeslot Number
Same as after time.
Training Sequence Code
Same as after time.
Hopping
Yes.
Hopping parameters
Chosen arbitrarily, different from "after time".
Mobile Allocation, before time
Chosen arbitrarily, at least one frequency and different from "Mobile Allocation, after time". In case of an MA with just one frequency, the frequency should be different from the BCCH carrier.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.13.7 Handover with starting time and frequency redefinition / failure case / time not elapsed
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.13.7.1 Conformance requirement
|
An MS, after receiving a FREQUENCY REDEFINITION message, shall keep the provided information until the time is elapsed. The Mobile Station must accept an intervening handover, and, in case of failure of this handover resulting in a return to the old channel before the time indicated in the FREQUENCY REDEFINITION message, shall return on the old channel with the frequency parameters in use at the moment of the reception of the FREQUENCY REDEFINITION message, and shall eventually start using the new frequency parameters in the correct time slot indicated by the starting time of the FREQUENCY REDEFINITION message.
Reference(s):
3GPP TS 04.08 / 3GPP TS 44.018 subclauses 3.4.4 and 3.4.5.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.13.7.2 Test purpose:
|
To verify that the MS, after receiving a FREQUENCY REDEFINITION and then a HANDOVER COMMAND message with a starting time and channel descriptions both for before and after the starting time, failing the handover, and ready to access on the old channel before the time indicated in the FREQUENCY REDEFINITION, resumes transmission on the channels used at the time of the reception of the FREQUENCY REDEFINITION message and eventually starts using the new frequency parameters at the time indicated in the FREQUENCY REDEFINITION message.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.13.7.3 Method of test
|
Initial condition(s)
System Simulator:
2 cells, CCCH_CONF set to 1 basic physical channel used for CCCH, not combined with SDCCHs.
Mobile Station:
The MS is in the "idle, updated" state, with a TMSI allocated, and camped on cell A.
Specific PICS statements
- MS supports only SDCCH (TSPC_AddInfo_SDCCHOnly)
- MS supports GSM HR (TSPC_AddInfo_Halfrate)
PIXIT statements
-
Foreseen final state of the MS
"Idle, updated", with TMSI allocated, and camped on cell A.
Test procedure
The System Simulator pages the MS and after the MS has responded with a CHANNEL REQUEST, the simulator assigns allocating a hopping channel (TCH/F, TCH/H or SDCCH, arbitrarily chosen among the channels supported). Then the SS sends a FREQUENCY REDEFINITION message (starting time T1), which modifies the frequency parameters to be used by the MS. Then the SS sends a HANDOVER COMMAND message, with a starting time (T2) and channel descriptions for both before and after the starting time. The MS shall try to activate the new channel (this is not verified) and shall then reactivate the old channel and trigger the establishment of the main signalling link on the old channel. The System Simulator does not activate the channels defined in the HANDOVER COMMAND. Then the MS shall send a HANDOVER FAILURE message. Time T1 is chosen so it is reached only after the sending of the HANDOVER FAILURE message. The MS shall eventually, at the TDMA frame defined by the contents of the "Starting Time" information element of the FREQUENCY REDEFINITION message, use the new frequency parameters. The verification is performed at the RF burst level.
Test parameters:
T1 is set to T0+5000 (mod 42 432), where T0 is the frame number at which the first burst of the FREQUENCY REDEFINITION message is sent.
T2 is set to T0+4000 (mod 42 432), where T0 is the frame number at which the first burst of the FREQUENCY REDEFINITION message is sent.
Maximum duration of test
180 s.
Expected sequence
Step
Direction
Message
Comments
1
SS -> MS
PAGING REQUEST TYPE 1
2
MS -> SS
CHANNEL REQUEST
3
SS -> MS
IMMEDIATE ASSIGNMENT
Hopping channel.
4
MS -> SS
PAGING RESPONSE
5
SS -> MS
FREQUENCY REDEFINITION
6
SS -> MS
HANDOVER COMMAND
Hopping channel, type among possible, signalling mode.
7
MS -> SS
HANDOVER ACCESS
Not checked.
8
MS -> SS
HANDOVER FAILURE
Sent on the correct channel (original parameters) after establishment of the main signalling link.
9
--------
Time T1
The SS checks that the MS is transmitting now on the correct frequencies (parameters of the FREQUENCY REDEFINITION message) and that the transmissions started in the correct frame.
10
SS -> MS
CHANNEL RELEASE
Specific message contents
FREQUENCY REDEFINITION
Information element
Value/remark
Channel Description
Channel Type and TDMA offset
Same as in IMMEDIATE ASSIGNMENT
Timeslot Number
Same as in IMMEDIATE ASSIGNMENT
Training Sequence Code
Same as in IMMEDIATE ASSIGNMENT
Hopping
Yes
Hopping parameters
Chosen arbitrarily, different than those of the IMMEDIATE ASSIGNMENT message, HSN same as in IMMEDIATE ASSIGNMENT.
Mobile Allocation
Chosen arbitrarily, at least two frequencies, different than those of the IMMEDIATE ASSIGNMENT message.
Starting Time
T1
HANDOVER COMMAND:
Information element
Value/remark
Cell Description
As for cell B.
Channel Description, after time
Channel Type and TDMA offset
Chosen arbitrarily among that supported by the Mobile Station.
Timeslot Number
Chosen arbitrarily.
Training Sequence Code
Chosen arbitrarily.
Hopping
Yes.
Hopping parameters
Chosen arbitrarily.
Power Command
Power level
Chosen arbitrarily.
Synchronization indication
Non synchronized.
Cell Channel Description
As for cell B.
Channel Mode
Mode
Signalling Only.
Mobile Allocation, after time
Chosen arbitrarily, at least one frequency. In case of an MA with just one frequency, the frequency should be different from the BCCH carrier.
Starting Time
T2
Channel Description, before time
Channel Type and TDMA offset
Same as after time.
Timeslot Number
Same as after time.
Training Sequence Code
Same as after time.
Hopping
Yes.
Hopping parameters
Chosen arbitrarily, different from "after time".
Mobile Allocation, before time
Chosen arbitrarily, at least one frequency and different from "Mobile Allocation, after time". In case of an MA with just one frequency, the frequency should be different from the BCCH carrier.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.13.8 Handover with starting time and frequency redefinition / failure case / time elapsed
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.13.8.1 Conformance requirement
|
An MS, after receiving a FREQUENCY REDEFINITION message, shall keep the provided information until the time is elapsed. The Mobile Station must accept an intervening handover, and, in case of failure of this handover resulting in a return to the old channel after the time indicated in the FREQUENCY REDEFINITION message, shall return on the old channel with the frequency parameters indicated in the FREQUENCY REDEFINITION message.
Reference(s):
3GPP TS 04.08 / 3GPP TS 44.018 subclauses 3.4.4 and 3.4.5.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.13.8.2 Test purpose:
|
To verify that the MS, after receiving a FREQUENCY REDEFINITION and then a HANDOVER COMMAND message with a starting time and channel descriptions both for before and after the starting time, failing the handover and returning on the old channel, and ready to access after the time indicated in the FREQUENCY REDEFINITION, resumes transmission using the new frequency parameters indicated in the FREQUENCY REDEFINITION message.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.13.8.3 Method of test
|
Initial condition(s)
System Simulator:
2 cells, CCCH_CONF set to 1 basic physical channel used for CCCH, not combined with SDCCHs.
Mobile Station:
The MS is in the "idle, updated" state, with a TMSI allocated, and camped on cell A.
Specific PICS statements
-
PIXIT statements
-
Foreseen final state of the MS
"Idle, updated", with TMSI allocated, and camped on cell A.
Test procedure
The System Simulator pages the MS and after the MS has responded with a CHANNEL REQUEST, the simulator assigns a hopping channel (SDCCH). Then the SS sends a FREQUENCY REDEFINITION message (starting time T1), which modifies the frequency parameters to be used by the MS. Then the SS sends a HANDOVER COMMAND message, with a starting time (T2) and channel descriptions for both before and after the starting time. Time T1 is chosen so it is reached after the sending of the HANDOVER COMMAND message, but before the return on the old channel. The System Simulator does not activate the channels defined in the HANDOVER COMMAND. The MS shall try to activate the new channel (this is not verified) and shall then reactivate the old channel with the new frequency parameters as indicated by the FREQUENCY REDEFINITION message, and trigger the establishment of the main signalling link on the old channel. Then the MS shall send a HANDOVER FAILURE message. The verification is performed at the RF burst level.
Test parameters:
i.e. for SDCCH
T2 is set to T0+5000 (mod 42 432), where T0 is the frame number at which the first burst of the FREQUENCY REDEFINITION message is sent.
T1 is set to T0+265(mod 42 432), where T0 is the frame number at which the first burst of the FREQUENCY REDEFINITION message is sent.
NOTE: T0 + 265 is calculated for a maximum execution time of:
FREQUENCY REDEFINITION using 1 L2 frame 51 frames
HANDOVER COMMAND using 3 L2 frames 153 frames
+ 120 ms maximum time for a channel change 25 frames
+ some frames contention (here 36)
Maximum duration of test
180 s.
Expected sequence
Step
Direction
Message
Comments
1
SS -> MS
PAGING REQUEST TYPE 1
2
MS -> SS
CHANNEL REQUEST
3
SS -> MS
IMMEDIATE ASSIGNMENT
Hopping channel.
4
MS -> SS
PAGING RESPONSE
5
SS -> MS
FREQUENCY REDEFINITION
6
SS -> MS
HANDOVER COMMAND
Hopping channel, type among possible, signalling mode.
7
MS -> SS
HANDOVER ACCESS
Not checked.
8
MS -> SS
HANDOVER FAILURE
Sent on the correct channel (parameters from the FREQUENCY REDEFINITION message) after establishment of the main signalling link.
9
SS -> MS
CHANNEL RELEASE
Specific message contents
FREQUENCY REDEFINITION
Information element
Value/remark
Channel Description
Channel Type and TDMA offset
Same as in IMMEDIATE ASSIGNMENT
Timeslot Number
Same as in IMMEDIATE ASSIGNMENT
Training Sequence Code
Same as in IMMEDIATE ASSIGNMENT
Hopping
Yes.
Hopping parameters
Chosen arbitrarily, different than those of the IMMEDIATE ASSIGNMENT message, HSN same as in IMMEDIATE ASSIGNMENT.
Mobile Allocation
Chosen arbitrarily, at least two frequencies, different than those of the IMMEDIATE ASSIGNMENT message
Starting Time
T1
HANDOVER COMMAND
Information element
Value/remark
Cell Description
As for cell B.
Channel Description, after time
Channel Type and TDMA offset
Chosen arbitrarily among that supported by the Mobile Station.
Timeslot Number
Chosen arbitrarily.
Training Sequence Code
Chosen arbitrarily.
Hopping
Yes.
Hopping parameters
Chosen arbitrarily.
Power Command
Power level
Chosen arbitrarily.
Synchronization indication
Non synchronized.
Cell Channel Description
As for cell B.
Channel Mode
Mode
Signalling Only.
Mobile Allocation, after time
Chosen arbitrarily, at least one frequency. In case of an MA with just one frequency, the frequency should be different from the BCCH carrier.
Starting Time
T2
Channel Description, before time
Channel Type and TDMA offset
Same as after time.
Timeslot Number
Same as after time.
Training Sequence Code
Same as after time.
Hopping
Yes.
Hopping parameters
Chosen arbitrarily, different from "after time".
Mobile Allocation, before time
Chosen arbitrarily, at least one frequency and different from "Mobile Allocation, after time". In case of an MA with just one frequency, the frequency should be different from the BCCH carrier.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.13.9 Immediate assignment with starting time / successful case / time not elapsed
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.13.9.1 Conformance requirement
|
A Mobile Station receiving an IMMEDIATE ASSIGNMENT message with a starting time and channel descriptions for both after and before the starting time, and ready to access before the indicated time has elapsed, shall perform the assignment on the channels as described for before the starting time and shall start using the new frequencies and hopping sequence in the correct time slot when the MS is allocated a dedicated channel.
Reference(s):
3GPP TS 04.08 / 3GPP TS 44.018 subclauses 3.3.1.1.3.1 and 9.1.18.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.13.9.2 Test purpose
|
To verify that the MS, after receiving an IMMEDIATE ASSIGNMENT message with a starting time and channel descriptions both for before and after the starting time, and ready to access before the indicated time, performs correctly the assignment using the description for before the time, and then starts using the frequency parameters for after the time at the time indicated in the message.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.13.9.3 Method of test
|
Initial condition(s)
System Simulator:
1 cell, CCCH_CONF set to 1 basic physical channel used for CCCH, not combined with SDCCHs.
Mobile Station:
The MS is in the "idle, updated" state, with a TMSI allocated.
Specific PICS statements
- MS supports only SDCCH (TSPC_AddInfo_SDCCHOnly)
- MS supports GSM HR (TSPC_AddInfo_Halfrate)
PIXIT statements
-
Foreseen final state of the MS
"Idle, updated", with TMSI allocated.
Test procedure
The System Simulator pages the MS and after the MS has responded with a CHANNEL REQUEST, the simulator sends an IMMEDIATE ASSIGNMENT message allocating a hopping channel (TCH/F, TCH/H or SDCCH, arbitrarily chosen among the channels supported), with a starting time and channel descriptions for both before and after the starting time. The indicated time is such that the Mobile Station is ready to access before that time. The Mobile Station then accesses the channel as described for before the starting time. The MS shall eventually, at the TDMA frame defined by the contents of the "Starting Time" information element of the IMMEDIATE ASSIGNMENT message, use the new frequency parameters. The verification is performed at the RF burst level.
Test parameters:
T1 is chosen arbitrarily to be between T0+60 and T0+100 (mod 42 432), where T0 is the frame number at which the first burst of the IMMEDIATE ASSIGNMENT COMMAND message is sent.
Maximum duration of test
45 s.
Expected sequence
Step
Direction
Message
Comments
1
SS -> MS
PAGING REQUEST TYPE 1
2
MS -> SS
CHANNEL REQUEST
3
SS -> MS
IMMEDIATE ASSIGNMENT
See specific message contents.
4
MS -> SS
PAGING RESPONSE
5
--------
Time T1
The SS checks that the MS is transmitting now on the correct frequencies (after time parameters) and that the transmissions started in the correct frame.
6
SS -> MS
CHANNEL RELEASE
Specific message contents
IMMEDIATE ASSIGNMENT
Information element
Value/remark
Page Mode
Normal.
Channel Description
Channel Type and TDMA offset
Chosen arbitrarily among that supported by the Mobile Station.
Timeslot Number
Chosen arbitrarily.
Training Sequence Code
Chosen arbitrarily.
Hopping
Yes.
Hopping parameters
Chosen arbitrarily.
Timing Advance
As needed.
Mobile Allocation (after time)
Chosen arbitrarily, at least one frequency. In case of an MA with just one frequency, the frequency should be different from the BCCH carrier.
Starting Time
T1
IA Rest Octet
MAIO
Chosen arbitrarily, different from "after time".
Mobile Allocation (before time)
Chosen arbitrarily, at least one frequency and different from "Mobile Allocation, after time". In case of an MA with just one frequency, the frequency should be different from the BCCH carrier.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.13.10 Immediate assignment with starting time / successful case / time elapsed
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.13.10.1 Conformance requirement
|
A Mobile Station receiving an IMMEDIATE ASSIGNMENT message with a starting time and channel descriptions for both after and before the starting time, and ready to access after the indicated time has elapsed, shall perform the assignment on the channels as described for after the starting time.
Reference(s):
3GPP TS 04.08 / 3GPP TS 44.018 subclauses 3.3.1.1.3.1 and 9.1.18.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.13.10.2 Test purpose
|
To verify that the MS, after receiving an IMMEDIATE ASSIGNMENT message with a starting time and channel descriptions both for before and after the starting time, performs correctly the assignment using the frequencies and hopping sequence for after the time if the indicated time has already elapsed when the Mobile Station is ready to transmit.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.13.10.3 Method of test
|
Initial condition(s)
System Simulator:
1 cell, CCCH_CONF set to 1 basic physical channel used for CCCH, not combined with SDCCHs.
Mobile Station:
The MS is in the "idle, updated" state, with a TMSI allocated.
Specific PICS statements
- MS supports only SDCCH (TSPC_AddInfo_SDCCHOnly)
- MS supports GSM HR (TSPC_AddInfo_Halfrate)
PIXIT statements
-
Foreseen final state of the MS
"Idle, updated", with TMSI allocated.
Test procedure
The System Simulator pages the MS and after the MS has responded with a CHANNEL REQUEST, the simulator sends an IMMEDIATE ASSIGNMENT message allocating a hopping channel (TCH/F, TCH/H or SDCCH, arbitrarily chosen among the channels supported), with a starting time and channel descriptions for both before and after the starting time. The indicated time is such that the Mobile Station is ready to access only after that time. The Mobile Station then accesses the channel as described for after the starting time. The verification is performed at the RF burst level.
Test parameters:
T1 is set to T0+5 (mod 42 432), where T0 is the frame number at which the first burst of the IMMEDIATE ASSIGNMENT COMMAND message is sent.
Maximum duration of test
45 s
Expected sequence
Step
Direction
Message
Comments
1
SS -> MS
PAGING REQUEST TYPE 1
2
MS -> SS
CHANNEL REQUEST
3
SS -> MS
IMMEDIATE ASSIGNMENT
See specific message contents.
4
MS -> SS
PAGING RESPONSE
The SS checks that the MS is transmitting now on the correct frequencies (after time parameters).
5
SS -> MS
CHANNEL RELEASE
Specific message contents
IMMEDIATE ASSIGNMENT:
Information element
Value/remark
Page Mode
Normal.
Channel Description
Channel Type and TDMA offset
Chosen arbitrarily among that supported by the Mobile Station.
Timeslot Number
Chosen arbitrarily.
Training Sequence Code
Chosen arbitrarily.
Hopping
Yes.
Hopping parameters
Chosen arbitrarily.
Timing Advance
As needed.
Mobile Allocation (after time)
Chosen arbitrarily, at least one frequency. In case of an MA with just one frequency, the frequency should be different from the BCCH carrier.
Starting Time
T1
IA Rest Octet
MAIO
Chosen arbitrarily, different from "after time".
Mobile Allocation (before time)
Chosen arbitrarily, at least one frequency and different from "Mobile Allocation, after time". In case of an MA with just one frequency, the frequency should be different from the BCCH carrier.
26.6.14 Default contents of GSM 900 layer 3 messages for RR tests
This subclause contains the default values of GSM 900 L3 messages, which unless indicated otherwise in subclause 26.6 shall be transmitted by the system simulator and which are required to be received from the GSM 900 MS under test. These values are used in order to be consistent with the phase 2 version of 26.6.
The necessary L3 messages are listed in alphabetic order, with the exception of the SYSTEM INFORMATION messages, where it is the information elements which are listed in alphabetic order (this is because some information elements occur in several SYSTEM INFORMATION types).
In this subclause, decimal values are normally used. However, sometimes a hexadecimal value, indicated by an "H", or a binary value, indicated by a "B" is used.
Default SYSTEM INFORMATION:
NOTE 1: SYSTEM INFORMATION 2 bis, SYSTEM INFORMATION 5 bis, SYSTEM INFORMATION 7, and SYSTEM INFORMATION 8 messages are not used.
Cell A
Contents of information elements in SYSTEM INFORMATION TYPE 1 to 6 messages for cell A.
(CBCH) Channel Description
Not present.
(CBCH) Mobile Allocation
Not present.
Cell Channel Description
- Format identifier
bit map 0.
- Cell Allocation ARFCN
Channel Numbers 20, 30, 50 and 70.
Cell Identity
- Cell Identity Value
0001H
Cell Options
- Power Control Indicator
Power Control Indicator is not set.
- DTX Indicator
MS shall not use DTX.
- Radio_Link_Timeout
8 SACCH blocks.
Cell Selection Parameters
- Cell_Reselect_Hysteresis
12 dB.
- MX_TXPWR_MAX_CCH
Minimum level.
- ACS
No addition cell parameters are present in SYSTEM INFORMATION messages 7 and 8.
- NECI
New establishment causes not supported.
- RXLEV_ACCESS_MIN
Minimum level.
Control Channel Description
- Attach-Detach allowed
No Attach/Detach.
- BS_AG_BLKS_RES
0 blocks reserved for access grant.
- CCCH_CONF
1 basic physical channel used for CCCH, combined with SDCCHs.
- BS_PA_MFRMS
5 multiframe periods for transmission of paging messages.
- T3212 Time-out value
Infinite.
L2 pseudo length
- System information 1
21
- System information 2
22
- System information 3
18
- System information 4
12
Location Area Identification
- Mobile Country Code
001 decimal
- Mobile Network Code
01 decimal
- Location Area Code
0001H
Message Type
- System information 1
00011001
- System information 2
00011010
- System information 3
00011011
- System information 4
00011100
- System information 5
00011101
- System information 6
00011110
Neighbour Cells Description
- Format identifier
bit map 0.
- BCCH Allocation Sequence
0
- BCCH Allocation ARFCN
Channels numbers 10, 20, 40, 80, 90, 100, 110 and 120.
- EXT-IND
This IE carries the complete BA.
NCC Permitted
0000 0010
RACH Control Parameters
- Max Retrans
Max 1 retrans.
- Tx-integer
5 slots used.
- Cell Barred for Access
Cell is not barred.
- Call Reestablishment Allowed
Not allowed.
- Access Control Class
Access is not barred.
- Emergency Call allowed
Yes.
SI 1 rest octets
Not used (all bits are set to spare).
SI 2 rest octets
Not used (all bits are set to spare).
SI 3 rest octets
Not used (all bits are set to spare).
SI 4 rest octets
Not used (all bits are set to spare).
Default settings for cell A:
Downlink input level
63 dBmicroVolt emf.
Uplink output power
minimum supported by the MS's power class.
Propagation profile
static.
BCCH/CCCH carrier number
20
Cell B
The contents of SYSTEM INFORMATION TYPE 1 to 6 messages for cell B are identical to those of cell A with the following exceptions:
Cell Channel Description
- Format Identifier
Bit map 0.
- Cell Allocation ARFCN
Channel Number 10.
NOTE 2: This IE needs modification when used in handover tests which command the MS to go to a frequency hopping channel in cell B.
Cell Identity
- Cell Identity Value 0002H
Default settings for cell B:
Downlink input level
53 dBmicroVolt emf.
Uplink output power
minimum supported by the MS's power class.
Propagation profile
static.
BCCH/CCCH carrier number
10
Contents of ALERTING message (SS to MS):
Protocol Discriminator
Call Control.
Transaction Identifier
TI value
As used in the SETUP message.
TI flag
1 (destination side).
Message Type
00000001
All other information elements
Not present.
Contents of ASSIGNMENT COMMAND message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101110
Channel Description
- Channel Type and TDMA offset
Bm + ACCHs
- Timeslot Number
Chosen arbitrarily by the test house.
- Training Sequence Code
Chosen arbitrarily by the test house.
- Hopping
Single RF channel.
- ARFCN
Channel number 30.
Power Command
- EPC mode (for R5 and after MS only)
0 (Channel not in EPC mode)
- FPC (for R99 and R4 MS only)
0 (FPC not in use)
- FPC_EPC mode (for R5 and after MS only)
0 (FPC or EPC not in use)
- Power level
Chosen arbitrarily by the test house.
All other information elements
Not present.
Contents of ASSIGNMENT COMPLETE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101001
RR Cause
- RR Cause Value
Normal event.
Contents of ASSIGNMENT FAILURE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101111
RR Cause
- RR Cause Value
Depending on test.
Contents of AUTHENTICATION REQUEST message:
Protocol Discriminator
MM message.
Skip Indicator
0000
Message Type
00010010
Ciphering Key Sequence Number
- Key Sequence
Chosen arbitrarily by the test house from the range 0 to 6.
Authentication Parameter RAND
- RAND value
Chosen arbitrarily by the test house.
Contents of AUTHENTICATION RESPONSE message:
Protocol Discriminator
MM message.
Skip Indicator
0000
Message Type
0X010100
Other information element(s)
Not checked.
Contents of CALL PROCEEDING message:
Protocol Discriminator
Call Control.
Transaction Identifier
TI value
As used in the SETUP message.
TI flag
1 (destination side).
Message Type
00000010
All other information elements
Not present.
Contents of CHANNEL MODE MODIFY message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00010000
Channel Description
- Channel Type and TDMA offset
Depending on test.
- Timeslot Number
Chosen arbitrarily by the test house.
- Training Sequence Code
Chosen arbitrarily by the test house.
- Hopping
Single RF channel.
- ARFCN
Channel number 30.
Channel Mode
- Mode
Depending on test.
Contents of CHANNEL MODE MODIFY ACKNOWLEDGE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00010111
Channel Description
- Channel Type and TDMA offset
Depending on test.
- Timeslot Number
Same as in the CHANNEL MODE MODIFY message.
- Training Sequence Code
Same as in the CHANNEL MODE MODIFY message.
- Hopping
Single RF channel.
- Frequency Band
Band number 0.
- ARFCN
Channel number 30.
Channel Mode
- Mode
Same as in the CHANNEL MODE MODIFY message.
Contents of CHANNEL RELEASE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00001101
RR Cause
- RR Cause Value
Normal event.
Contents of CHANNEL REQUEST message
Establishment Cause
Not checked.
Random Reference
Not checked.
Contents of CIPHERING MODE COMMAND message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00110101
Cipher Mode Setting
- algorithm identifier
cipher with A5/1.
- SC
Start ciphering.
Cipher Response
IMEI shall not be included.
Contents of CIPHERING MODE COMPLETE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00110010
Mobile Identity
Not present.
Contents of the CLASSMARK CHANGE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
000100110
Mobile Station Classmark 2
See PIXIT.
Mobile Station Classmark 3
For presence and contents see PIXIT.
Contents of CM SERVICE ACCEPT message:
Protocol Discriminator
Mobility Management.
Skip Indicator
0000
Message Type
00100001
Contents of CM SERVICE REQUEST message
Protocol Discriminator
Mobility Management.
Skip Indicator
0000
Message Type
0X100100
Other information elements
Not checked.
Contents of CONNECT message (SS to MS)
Protocol Discriminator
Call Control.
Transaction Identifier
TI value
As used in the SETUP message.
TI flag
1
Message Type
00000111
All other information elements
Not present.
Contents of CONNECT ACKNOWLEDGE message (MS to SS)
Protocol Discriminator
Call Control.
Transaction Identifier
TI value
As used in the SETUP message.
TI flag
0
Message Type
0X001111
Contents of HANDOVER ACCESS message:
Handover Reference
Equal to the value included in the Handover Command message.
Contents of HANDOVER COMMAND message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101011
Cell Description
- Network Colour Code
1
- Base station Colour Code
Corresponding to target cell
- BCCH Carrier Number
Set to the BCCH carrier number of cell B. (one of 10, 20, 80, 90, 100, 110 or 120).
Channel Description
- Channel Type and TDMA offset
Bm + ACCHs.
- Timeslot Number
Chosen arbitrarily by the test house.
- Training Sequence Code
Chosen arbitrarily by the test house.
- Hopping
Single RF channel.
- ARFCN
Chosen arbitrarily by the test house from those supported on the target cell.
Handover Reference
- Handover Reference Value
Chosen arbitrarily by the test house.
Power Command
- ATC
0 (Sending of Handover Access is mandatory)
- EPC mode (for R5 and after MS only)
0 (Channel not in EPC mode)
- FPC (for R99 and R4 MS only)
0 (FPC not in use)
- FPC_EPC mode (for R5 and after MS only)
0 (FPC or EPC not in use)
- Power level
Chosen arbitrarily by the test house.
All other information elements
Not present.
Contents of HANDOVER COMPLETE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101100
RR cause
Normal event.
Time difference
Not present.
Contents of HANDOVER FAILURE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101000
RR cause
Dependent on the test.
IDENTITY REQUEST
Information element
Value/remark
Identity type
IMEI
Spare half octet
0000
IDENTITY RESPONSE
Information element
Value/remark
Mobile identity
not checked
Contents of IMMEDIATE ASSIGNMENT message:
L2 pseudo length
This is the sum of the lengths of all the information elements present in the message except for the IA rest octets and L2 pseudo length IEs. For the default message the L2 pseudo length is 11.
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00111111
Page Mode
- Page Mode
Normal Paging.
Channel Description
- Channel Type and TDMA offset
For non-combined CCCH/SDCCH (see initial conditions), SDCCH/8, with subchannel chosen arbitrarily by the test house For combined CCCH/SDCCH (default SS conditions), SDCCH/4, with subchannel chosen arbitrarily by the test house.
- Timeslot Number
For non-combined CCCH/SDCCH (see initial conditions), chosen arbitrarily by the test house; For combined CCCH/SDCCH (default SS conditions), SDCCH/4, timeslot zero.
- Training Sequence Code
For non-combined CCCH/SDCCH (see initial conditions), chosen arbitrarily by the test house; For combined CCCH/SDCCH (default SS
conditions), SDCCH/4, TSC=5 (same as the BCC).
- Hopping
Single RF channel.
- ARFCN
For non-combined CCCH/SDCCH (see initial conditions), Channel number 30; For combined CCCH/SDCCH (default SS conditions), SDCCH/4, Channel number 20.
Request Reference
Pertaining to last Channel Request sent by the MS.
Timing Advance
- Timing advance value
30 bit periods.
Mobile Allocation
- Length
0
Starting Time
Not present.
IA rest octets
Not used (all bits set to spare).
Contents of IMMEDIATE ASSIGNMENT EXTENDED message:
L2 pseudo length
This is the sum of the lengths of all the information elements present in the message except for the IAX rest octets and L2 pseudo length IEs. For the default message the L2 pseudo length is 18.
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00111001
Page Mode
- Page Mode
Normal Paging.
Channel Description 1
- Channel Type and TDMA offset
For non-combined CCCH/SDCCH (see test conditions), SDCCH/8, with subchannel chosen arbitrarily by the test house; For combined CCCH/SDCCH (default SS conditions), SDCCH/4, with subchannel chosen arbitrarily by the test house.
- Timeslot Number
For non-combined CCCH/SDCCH (see test conditions), chosen arbitrarily by the test house; For combined CCCH/SDCCH (default SS conditions), SDCCH/4, timeslot zero.
- Training Sequence Code
For non-combined CCCH/SDCCH (see initial conditions), chosen arbitrarily by the test house; For combined CCCH/SDCCH (default SS
conditions), SDCCH/4, TSC=5 (same as the BCC).
- Hopping
Single RF channel.
- ARFCN
For non-combined CCCH/SDCCH (see initial conditions),Channel number 30; For combined CCCH/SDCCH (default SS conditions), SDCCH/4, Channel number 20.
Request Reference 1
Pertaining to last Channel Request sent by the MS.
Timing Advance 1
- Timing advance value
Chosen arbitrarily by the test house.
Channel Description 2
- Channel Type and TDMA offset
Same channel type as in Channel Description 1, but different TDMA offset to that in Channel Description 1.
- Timeslot Number
equal to the value in Channel Description 1.
- Training Sequence Code
equal to the value in Channel Description 1.
- Hopping
Single RF channel.
- ARFCN
equal to the value in Channel Description 1.
Request Reference 2
Not pertaining to any Channel Requests sent by the MS.
Timing Advance 2
- Timing advance value
Chosen arbitrarily by the test house.
Mobile Allocation
- Length
0
Starting Time
Not present.
IAX rest octets
Not used (all bits set to spare).
Contents of IMMEDIATE ASSIGNMENT REJECT message:
L2 pseudo length
19
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00111010
Page Mode
- Page Mode
Normal Paging.
Request Reference
Pertaining to last Channel Request sent by the MS.
Wait Indication
0 s.
Request Reference
Not pertaining to the MS under test.
Wait Indication
0 s.
Request Reference
Not pertaining to the MS under test.
Wait Indication
0 s.
Request Reference
Not pertaining to the MS under test.
Wait Indication
0 s.
IAR rest octets
Not used (all bits set to spare).
Contents of LOCATION UPDATING REQUEST message:
Protocol Discriminator
MM message.
Skip Indicator
0000
Message Type
0X001000
Other information elements
Not checked.
Contents of PAGING REQUEST TYPE 1 message:
L2 pseudo length
This is the sum of the lengths of all the information elements present in the message except for the P1 rest octets and L2 pseudo length IEs. For the default message the L2 pseudo length is 9.
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00100001
Page Mode
- Page Mode
Normal Paging.
Channels needed
- first channel
any channel.
- second channel
any channel.
Mobile Identity 1
- odd/even indication
Even.
- Type of Identity
TMSI.
- Identity Digits
TMSI previously allocated to MS.
Mobile Identity 2
Not present.
P1 rest octets
Not used (all bits set to spare).
Contents of PAGING REQUEST TYPE 2 message:
L2 pseudo length
This is the sum of the lengths of all the information elements present in the message except for the P2 rest octets and L2 pseudo length IEs. For the default message the L2 pseudo length is 11.
Protocol Discriminator
RR Management..
Skip Indicator
0000
Message Type
00100010
Page Mode
- Page Mode
Normal Paging.
Channels needed
- first channel
any channel.
- second channel
any channel.
Mobile Identity 1
- TMSI value
TMSI previously allocated to MS.
Mobile Identity 2
- TMSI value
TMSI not allocated to MS.
Mobile Identity
Not present.
P2 rest octets
Not used (all bits set to spare).
Contents of PAGING REQUEST TYPE 3 message:
L2 pseudo length
19
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00100100
Page Mode
- Page Mode
Normal Paging.
Channels needed
- first channel
any channel.
- second channel
any channel.
Mobile identity 1
- TMSI value
TMSI previously allocated to MS.
Mobile identity 2
- TMSI value
TMSI not allocated to MS.
Mobile identity 3
- TMSI value
TMSI not allocated to MS.
Mobile identity 4
- TMSI value
TMSI not allocated to MS.
P3 rest octets
Not used (all bits set to spare).
Contents of PAGING RESPONSE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00100111
Ciphering Key Sequence Number
- Key Sequence
Key sequence number previously allocated to MS, or "111" if no key is available.
Mobile Station Classmark 2
Mobile Identity
- odd/even indication
Even
- Type of identity
TMSI
- Identity Digits
TMSI previously allocated to MS.
Contents of PHYSICAL INFORMATION message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101101
Timing advance
20 bit periods.
Contents of SETUP message; (MS to SS):
Protocol Discriminator
Call Control.
Transaction Identifier
TI value
any value from the set {0, ..., 6}.
TI flag
0
Message Type
0X000101
Other information elements
Not checked.
26.6.15 Default contents of DCS 1 800 layer 3 messages for RR tests
This subclause contains the default values of DCS 1 800 L3 messages, which unless indicated otherwise in subclause 26.6 shall be transmitted by the system simulator and which are required to be received from the DCS 1 800 MS under test. These values are used in order to be consistent with the phase 2 version of 26.6.
The necessary L3 messages are listed in alphabetic order, with the exception of the SYSTEM INFORMATION messages, where it is the information elements which are listed in alphabetic order (this is because some information elements occur in several SYSTEM INFORMATION types).
In this subclause, decimal values are normally used. However, sometimes a hexadecimal value, indicated by an "H", or a binary value, indicated by a "B" is used.
Default SYSTEM INFORMATION:
NOTE 1: SYSTEM INFORMATION 2 bis, SYSTEM INFORMATION 7, and SYSTEM INFORMATION 8 messages are not used.
SYSTEM INFORMATION 5 bis is not sent as a default message. For those tests which require SYSTEM INFORMATION 5 bis see the specific message contents for that test.
Cell A
Contents of information elements in SYSTEM INFORMATION TYPE 1 to 6 messages for cell A.
(CBCH) Channel Description
Not present.
(CBCH) Mobile Allocation
Not present.
Cell Channel Description
- Format identifier
Range 512.
- Cell Allocation ARFCN
Channel Numbers, 590, 650, 750 and 850.
Cell Identity
- Cell Identity Value
0001H
Cell Options
- Power Control Indicator
Power Control Indicator is not set, 0
- DTX Indicator
MS shall not use DTX.
- Radio_Link_Timeout
8 SACCH blocks.
Cell Selection Parameters
- Cell_Reselect_Hysteresis
12 dB
- MX_TXPWR_MAX_CCH
Minimum level.
- ACS
No addition cell parameters are present in SYSTEM INFORMATION messages 7 and 8.
- NECI
New establishment causes not supported.
- RXLEV_ACCESS_MIN
Minimum level.
Control Channel Description
- Attach-Detach allowed
MS shall not apply.
- BS_AG_BLKS_RES
0 blocks reserved for access grant.
- CCCH_CONF
1 basic physical channel used for CCCH, combined with SDCCHs.
- BS_PA_MFRMS
5 multiframe periods for transmission of paging messages.
- T3212 Time-out value
Infinite.
L2 pseudo length
- System information 1
21
- System information 2
22
- System information 3
18
- System information 4
12
Location Area Identification
- Mobile Country Code
001 decimal.
- Mobile Network Code
01 decimal.
- Location Area Code
0001H
Message Type
- System information 1
00011001
- System information 2
00011010
- System information 3
00011011
- System information 4
00011100
- System information 5
00011101
- System information 6
00011110
Neighbour Cells Description
- Format identifier
Range 512.
- BCCH Allocation Sequence
0
- BCCH Allocation ARFCN
Channels numbers, 520, 590, 600, 700, 747, 764, 780, 810, 870.
- EXT-IND
This IE carries the complete BA. EXT-IND is 0.
NCC Permitted
0000 0010
RACH Control Parameters
- Max Retrans
Max 1 retrans.
- Tx-integer
5 slots used.
- Cell Barred for Access
Cell is not barred.
- Call Reestablishment Allowed
Not Allowed.
- Access Control Class
Access is not barred.
- Emergency Call allowed
Yes.
SI 1 rest octets
Not used (all bits are set to spare).
SI 2 rest octets
Not used (all bits are set to spare).
SI 3 rest octets
Not used (all bits are set to spare).
SI 4 rest octets
Not used (all bits are set to spare).
Default settings for cell A:
Downlink input level
63 dBmicroVolt emf().
Uplink output power
minimum supported by the MS's power class
Propagation profile
static.
BCCH/CCCH carrier number
ARFN 590.
Cell B
The contents of SYSTEM INFORMATION TYPE 1 to 6 messages for cell B are identical to those of cell A with the following exceptions:
Cell Channel Description
- Format Identifier
Range 512.
- Cell Allocation ARFCN
Channel Number 520.
NOTE 2: This IE needs modification when used in handover tests which command the MS to go to a frequency hopping channel in cell B.
Cell Identity
- Cell Identity Value
0002H
Default settings for cell B:
Downlink input level
53 dBmicroVolt emf().
Uplink output power
minimum supported by the MS's power class
Propagation profile
static.
BCCH/CCCH carrier number
520
Contents of ALERTING message (SS to MS):
Protocol Discriminator
Call Control.
Transaction Identifier
TI value
As used in the SETUP message.
TI flag
1 (destination side).
Message Type
00000001
All other information elements
Not present.
Contents of ASSIGNMENT COMMAND message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101110
Channel Description
- Channel Type and TDMA offset
Bm + ACCHs.
- Timeslot Number
Chosen arbitrarily by the test house.
- Training Sequence Code
Chosen arbitrarily by the test house.
- Hopping
Single RF channel.
- ARFCN
Channel number 650.
Power Command
- EPC mode (for R5 and after MS only)
0 (Channel not in EPC mode)
- FPC (for R99 and R4 MS only)
0 (FPC not in use)
- FPC_EPC mode (for R5 and after MS only)
0 (FPC or EPC not in use)
- Power level
Chosen arbitrarily by the test house.
All other information elements
Not present.
Contents of ASSIGNMENT COMPLETE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101001
RR Cause
- RR Cause Value
Normal event.
Contents of ASSIGNMENT FAILURE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101111
RR Cause
- RR Cause Value
Depending on test.
Contents of AUTHENTICATION REQUEST message:
Protocol Discriminator
MM message.
Skip Indicator
0000
Message Type
00010010
Ciphering Key Sequence Number
- Key Sequence
Chosen arbitrarily by the test house from the range 0 to 6.
Authentication Parameter RAND
- RAND value
Chosen arbitrarily by the test house.
Contents of AUTHENTICATION RESPONSE message:
Protocol Discriminator
MM message.
Skip Indicator
0000
Message Type
0X010100
Other information element(s)
Not checked.
Contents of CALL PROCEEDING message:
Protocol Discriminator
Call Control.
Transaction Identifier
TI value
As used in the SETUP message.
TI flag
1 (destination side).
Message Type
00000010
All other information elements
Not present.
Contents of CHANNEL MODE MODIFY message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00010000
Channel Description
- Channel Type and TDMA offset
Depending on test.
- Timeslot Number
Chosen arbitrarily by the test house.
- Training Sequence Code
Chosen arbitrarily by the test house.
- Hopping
Single RF channel.
- ARFCN
Channel number 650.
Channel Mode
- Mode
Depending on test.
Contents of CHANNEL MODE MODIFY ACKNOWLEDGE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00010111
Channel Description
- Channel Type and TDMA offset
Depending on test.
- Timeslot Number
Same as in the CHANNEL MODE MODIFY message.
- Training Sequence Code
Same as in the CHANNEL MODE MODIFY message.
- Hopping
Single RF channel.
- Frequency Band
Band number 0.
- ARFCN
Channel number 650.
Channel Mode
- Mode
Same as in the CHANNEL MODE MODIFY message.
Contents of CHANNEL RELEASE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00001101
RR Cause
- RR Cause Value
Normal event.
Contents of CHANNEL REQUEST message:
Establishment Cause
Not checked.
Random Reference
Not checked.
Contents of CIPHERING MODE COMMAND message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00110101
Cipher Mode Setting
- algorithm identifier
cipher with A5/1.
- SC
Start ciphering.
Cipher Response
IMEI shall not be included.
Contents of CIPHERING MODE COMPLETE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00110010
Mobile Identity
Not present.
Contents of the CLASSMARK CHANGE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
000100110
Mobile Station Classmark 2
- RF Power Capability
See PIXIT.
- Frequency Capability
Set to 0.
Mobile Station Classmark 3
For presence and contents see PIXIT.
Contents of CM SERVICE ACCEPT message:
Protocol Discriminator
Mobility Management.
Skip Indicator
0000
Message Type
00100001
Contents of CM SERVICE REQUEST message:
Protocol Discriminator
Mobility Management.
Skip Indicator
0000
Message Type
0X100100
Other information elements
Not checked.
Contents of CONNECT message (SS to MS):
Protocol Discriminator
Call Control.
Transaction Identifier
TI value
As used in the SETUP message.
TI flag
1
Message Type
00000111
All other information elements
Not present.
Contents of CONNECT ACKNOWLEDGE message (MS to SS):
Protocol Discriminator
Call Control.
Transaction Identifier
TI value
As used in the SETUP message.
TI flag
0
Message Type
0X001111
Contents of HANDOVER ACCESS message:
Handover Reference
Equal to the value included in the Handover Command message.
Contents of HANDOVER COMMAND message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101011
Cell Description
- Network Colour Code
1
- Base station Colour Code
Corresponding to target cell
- BCCH Carrier Number
Set to the BCCH carrier number of cell B. (one of 520, 590, 600, 700, 780, 810 or 870).
Channel Description
- Channel Type and TDMA offset
Bm + ACCHs.
- Timeslot Number
Chosen arbitrarily by the test house.
- Training Sequence Code
Chosen arbitrarily by the test house.
- Hopping
Single RF channel.
- ARFCN
Chosen arbitrarily by the test house from those supported on the target cell.
Handover Reference
- Handover Reference Value
Chosen arbitrarily by the test house.
Power Command
- ATC
0 (Sending of Handover Access is mandatory)
- EPC mode (for R5 and after MS only)
0 (Channel not in EPC mode)
- FPC (for R99 and R4 MS only)
0 (FPC not in use)
- FPC_EPC mode (for R5 and after MS only)
0 (FPC or EPC not in use)
- Power level
Chosen arbitrarily by the test house.
All other information elements
Not present.
Contents of HANDOVER COMPLETE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101100
RR cause
Normal event.
Time difference
Not present.
Contents of HANDOVER FAILURE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101000
RR cause
Dependent on the test.
IDENTITY REQUEST
Information element
Value/remark
Identity type
IMEI
Spare half octet
0000
IDENTITY RESPONSE
Information element
Value/remark
Mobile identity
not checked
Contents of IMMEDIATE ASSIGNMENT message:
L2 pseudo length
This is the sum of the lengths of all the information elements present in the message except for the IA rest octets and L2 pseudo length IEs. For the default message the L2 pseudo length is 11.
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00111111
Page Mode
- Page Mode
Normal Paging.
Channel Description
- Channel Type and TDMA offset
For non-combined CCCH/SDCCH (see initial conditions), SDCCH/8, with subchannel chosen arbitrarily by the test house For combined CCCH/SDCCH (default SS conditions), SDCCH/4, with subchannel chosen arbitrarily by the test house.
- Timeslot Number
For non-combined CCCH/SDCCH (see initial conditions), chosen arbitrarily by the test house; For combined CCCH/SDCCH (default SS conditions), SDCCH/4, timeslot zero.
- Training Sequence Code
For non-combined CCCH/SDCCH (see initial conditions), chosen arbitrarily by the test house; For combined CCCH/SDCCH (default SS
conditions), SDCCH/4, TSC=5 (same as the BCC).
- Hopping
Single RF channel.
- ARFCN
For non-combined CCCH/SDCCH (see initial conditions), Channel number 650; For combined CCCH/SDCCH (default SS conditions), SDCCH/4, Channel number 590.
Request Reference
Pertaining to last Channel Request sent by the MS.
Timing Advance
- Timing advance value
30 bit periods.
Mobile Allocation
- Length
0
Starting Time
Not present.
IA rest octets
Not used (all bits set to spare).
Contents of IMMEDIATE ASSIGNMENT EXTENDED message:
L2 pseudo length
This is the sum of the lengths of all the information elements present in the message except for the IAX rest octets and L2 pseudo length IEs. For the default message the L2 pseudo length is 18.
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00111001
Page Mode
- Page Mode
Normal Paging.
Channel Description 1
- Channel Type and TDMA offset
For non-combined CCCH/SDCCH (see test conditions), SDCCH/8, with subchannel chosen arbitrarily by the test house; For combined CCCH/SDCCH (default SS conditions), SDCCH/4, with subchannel chosen arbitrarily by the test house.
- Timeslot Number
For non-combined CCCH/SDCCH (see test conditions), chosen arbitrarily by the test house; For combined CCCH/SDCCH (default SS conditions), SDCCH/4, timeslot zero.
- Training Sequence Code
For non-combined CCCH/SDCCH (see initial conditions), chosen arbitrarily by the test house; For combined CCCH/SDCCH (default SS
conditions), SDCCH/4, TSC=5 (same as the BCC).
- Hopping
Single RF channel.
- ARFCN
For non-combined CCCH/SDCCH (see initial conditions),Channel number 650; For combined CCCH/SDCCH (default SS conditions), SDCCH/4, Channel number 590.
Request Reference 1
Pertaining to last Channel Request sent by the MS.
Timing Advance 1
- Timing advance value
Chosen arbitrarily by the test house.
Channel Description 2
- Channel Type and TDMA offset
Same channel type as in Channel Description 1, but different TDMA offset to that in Channel Description 1.
- Timeslot Number
equal to the value in Channel Description 1.
- Training Sequence Code
equal to the value in Channel Description 1.
- Hopping
Single RF channel.
- ARFCN
equal to the value in Channel Description 1.
Request Reference 2
Not pertaining to any Channel Requests sent by the MS.
Timing Advance 2
- Timing advance value
Chosen arbitrarily by the test house.
Mobile Allocation
- Length
0
Starting Time
Not present.
IAX rest octets
Not used (all bits set to spare).
Contents of IMMEDIATE ASSIGNMENT REJECT message:
L2 pseudo length
19
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00111010
Page Mode
- Page Mode
Normal Paging.
Request Reference
Pertaining to last Channel Request sent by the MS.
Wait Indication
0 s.
Request Reference
Not pertaining to the MS under test.
Wait Indication
0 s.
Request Reference
Not pertaining to the MS under test.
Wait Indication
0 s.
Request Reference
Not pertaining to the MS under test.
Wait Indication
0 s.
IAR rest octets
Not used (all bits set to spare).
Contents of LOCATION UPDATING REQUEST message:
Protocol Discriminator
MM message.
Skip Indicator
0000
Message Type
0X001000
Other information elements
Not checked.
Contents of PAGING REQUEST TYPE 1 message:
L2 pseudo length
This is the sum of the lengths of all the information elements present in the message except for the P1 rest octets and L2 pseudo length IEs. For the default message the L2 pseudo length is 9.
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00100001
Page Mode
- Page Mode
Normal Paging.
Channels needed
- first channel
any channel.
- second channel
any channel.
Mobile Identity 1
- odd/even indication
Even.
- Type of Identity
TMSI.
- Identity Digits
TMSI previously allocated to MS.
Mobile Identity 2
Not present.
P1 rest octets
Not used (all bits set to spare).
Contents of PAGING REQUEST TYPE 2 message:
L2 pseudo length
This is the sum of the lengths of all the information elements present in the message except for the P2 rest octets and L2 pseudo length IEs. For the default message the L2 pseudo length is 11.
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00100010
Page Mode
- Page Mode
Normal Paging.
Channels needed
- first channel
any channel.
- second channel
any channel.
Mobile Identity 1
- TMSI value
TMSI previously allocated to MS.
Mobile Identity 2
- TMSI value
TMSI not allocated to MS.
Mobile Identity
Not present.
P2 rest octets
Not used (all bits set to spare).
Contents of PAGING REQUEST TYPE 3 message:
L2 pseudo length
19
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00100100
Page Mode
- Page Mode
Normal Paging.
Channels needed
- first channel
any channel.
- second channel
any channel.
Mobile identity 1
- TMSI value
TMSI previously allocated to MS.
Mobile identity 2
- TMSI value
TMSI not allocated to MS.
Mobile identity 3
- TMSI value
TMSI not allocated to MS.
Mobile identity 4
- TMSI value
TMSI not allocated to MS.
P3 rest octets
Not used (all bits set to spare).
Contents of PAGING RESPONSE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00100111
Ciphering Key Sequence Number
- Key Sequence
Key sequence number previously allocated to MS, or "111" if no key is available.
Mobile Station Classmark 2
Mobile Identity
- odd/even indication
Even.
- Type of identity
TMSI
- Identity Digits
TMSI previously allocated to MS.
Contents of PHYSICAL INFORMATION message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101101
Timing advance
20 bit periods.
Contents of SETUP message; (MS to SS):
Protocol Discriminator
Call Control.
Transaction Identifier
TI value
any value from the set {0, ..., 6}.
TI flag
0
Message Type
0X000101
Other information elements
Not checked.
26.6.16 Default contents of GSM 450 layer 3 messages for RR tests
This subclause contains the default values of GSM 450 L3 messages, which unless indicated otherwise in subclause 26.6 shall be transmitted by the system simulator and which are required to be received from the GSM 450 MS under test. These values are used in order to be consistent with the phase 2 version of subclause 26.6.
The necessary L3 messages are listed in alphabetic order, with the exception of the SYSTEM INFORMATION messages, where it is the information elements which are listed in alphabetic order (this is because some information elements occur in several SYSTEM INFORMATION types).
In this subclause, decimal values are normally used. However, sometimes a hexadecimal value, indicated by an "H", or a binary value, indicated by a "B" is used.
Default SYSTEM INFORMATION:
NOTE 1: SYSTEM INFORMATION 2 bis, SYSTEM INFORMATION 5 bis, SYSTEM INFORMATION 7, and SYSTEM INFORMATION 8 messages are not used.
Cell A
Contents of information elements in SYSTEM INFORMATION TYPE 1 to 6 messages for cell A.
(CBCH) Channel Description
Not present.
(CBCH) Mobile Allocation
Not present.
Cell Channel Description
- Format identifier
Range 128.
- Cell Allocation ARFCN
Channel Numbers 263, 267, 275 and 279.
Cell Identity
- Cell Identity Value
0001H
Cell Options
- Power Control Indicator
Power Control Indicator is not set.
- DTX Indicator
MS shall not use DTX.
- Radio_Link_Timeout
8 SACCH blocks.
Cell Selection Parameters
- Cell_Reselect_Hysteresis
12 dB.
- MX_TXPWR_MAX_CCH
Minimum level.
- ACS
No addition cell parameters are present in SYSTEM INFORMATION messages 7 and 8.
- NECI
New establishment causes not supported.
- RXLEV_ACCESS_MIN
Minimum level.
Control Channel Description
- Attach-Detach allowed
No Attach/Detach.
- BS_AG_BLKS_RES
0 blocks reserved for access grant.
- CCCH_CONF
1 basic physical channel used for CCCH, combined with SDCCHs.
- BS_PA_MFRMS
5 multiframe periods for transmission of paging messages.
- T3212 Time-out value
Infinite.
L2 pseudo length
- System information 1
21
- System information 2
22
- System information 3
18
- System information 4
12
Location Area Identification
- Mobile Country Code
001 decimal
- Mobile Network Code
01 decimal
- Location Area Code
0001H
Message Type
- System information 1
00011001
- System information 2
00011010
- System information 3
00011011
- System information 4
00011100
- System information 5
00011101
- System information 6
00011110
Neighbour Cells Description
- Format identifier
128 range.
- BCCH Allocation Sequence
0
- BCCH Allocation ARFCN
Channels numbers 262, 263, 274, 282, 284, 287, 290 and 293.
- EXT-IND
This IE carries the complete BA.
NCC Permitted
0000 0010
RACH Control Parameters
- Max Retrans
Max 1 retrans.
- Tx-integer
5 slots used.
- Cell Barred for Access
Cell is not barred.
- Call Reestablishment Allowed
Not allowed.
- Access Control Class
Access is not barred.
- Emergency Call allowed
Yes.
SI 1 rest octets
Not used (all bits are set to spare).
SI 2 rest octets
Not used (all bits are set to spare).
SI 3 rest octets
Not used (all bits are set to spare).
SI 4 rest octets
Not used (all bits are set to spare).
Default settings for cell A:
Downlink input level
63 dBmicroVolt emf.
Uplink output power
minimum supported by the MS's power class.
Propagation profile
static.
BCCH/CCCH carrier number
263
Cell B
The contents of SYSTEM INFORMATION TYPE 1 to 6 messages for cell B are identical to those of cell A with the following exceptions:
Cell Channel Description
- Format Identifier
128 range.
- Cell Allocation ARFCN
Channel Number 261.
NOTE 2: This IE needs modification when used in handover tests which command the MS to go to a frequency hopping channel in cell B.
Cell Identity
- Cell Identity Value 0002H
Default settings for cell B:
Downlink input level
53 dBmicroVolt emf.
Uplink output power
minimum supported by the MS's power class.
Propagation profile
static.
BCCH/CCCH carrier number
261
Contents of ALERTING message (SS to MS):
Protocol Discriminator
Call Control.
Transaction Identifier
TI value
As used in the SETUP message.
TI flag
1 (destination side).
Message Type
00000001
All other information elements
Not present.
Contents of ASSIGNMENT COMMAND message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101110
Channel Description
- Channel Type and TDMA offset
Bm + ACCHs
- Timeslot Number
Chosen arbitrarily by the test house.
- Training Sequence Code
Chosen arbitrarily by the test house.
- Hopping
Single RF channel.
- ARFCN
Channel number 267.
Power Command
Power Command
- EPC mode (for R5 and after MS only)
0 (Channel not in EPC mode)
- FPC (for R99 and R4 MS only)
0 (FPC not in use)
- FPC_EPC mode (for R5 and after MS only)
0 (FPC or EPC not in use)
- Power level
Chosen arbitrarily by the test house.
All other information elements
Not present.
Contents of ASSIGNMENT COMPLETE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101001
RR Cause
- RR Cause Value
Normal event.
Contents of ASSIGNMENT FAILURE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101111
RR Cause
- RR Cause Value
Depending on test.
Contents of AUTHENTICATION REQUEST message:
Protocol Discriminator
MM message.
Skip Indicator
0000
Message Type
00010010
Ciphering Key Sequence Number
- Key Sequence
Chosen arbitrarily by the test house from the range 0 to 6.
Authentication Parameter RAND
- RAND value
Chosen arbitrarily by the test house.
Contents of AUTHENTICATION RESPONSE message:
Protocol Discriminator
MM message.
Skip Indicator
0000
Message Type
0X010100
Other information element(s)
Not checked.
Contents of CALL PROCEEDING message:
Protocol Discriminator
Call Control.
Transaction Identifier
TI value
As used in the SETUP message.
TI flag
1 (destination side).
Message Type
00000010
All other information elements
Not present.
Contents of CHANNEL MODE MODIFY message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00010000
Channel Description
- Channel Type and TDMA offset
Depending on test.
- Timeslot Number
Chosen arbitrarily by the test house.
- Training Sequence Code
Chosen arbitrarily by the test house.
- Hopping
Single RF channel.
- ARFCN
Channel number 267.
Channel Mode
- Mode
Depending on test.
Contents of CHANNEL MODE MODIFY ACKNOWLEDGE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00010111
Channel Description
- Channel Type and TDMA offset
Depending on test.
- Timeslot Number
Same as in the CHANNEL MODE MODIFY message.
- Training Sequence Code
Same as in the CHANNEL MODE MODIFY message.
- Hopping
Single RF channel.
- Frequency Band
Band number 0.
- ARFCN
Channel number 267.
Channel Mode
- Mode
Same as in the CHANNEL MODE MODIFY message.
Contents of CHANNEL RELEASE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00001101
RR Cause
- RR Cause Value
Normal event.
Contents of CHANNEL REQUEST message
Establishment Cause
Not checked.
Random Reference
Not checked.
Contents of CIPHERING MODE COMMAND message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00110101
Cipher Mode Setting
- algorithm identifier
cipher with A5/1.
- SC
Start ciphering.
Cipher Response
IMEI shall not be included.
Contents of CIPHERING MODE COMPLETE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00110010
Mobile Identity
Not present.
Contents of the CLASSMARK CHANGE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
000100110
Mobile Station Classmark 2
See PIXIT.
Mobile Station Classmark 3
For presence and contents see PIXIT.
Contents of CM SERVICE ACCEPT message:
Protocol Discriminator
Mobility Management.
Skip Indicator
0000
Message Type
00100001
Contents of CM SERVICE REQUEST message
Protocol Discriminator
Mobility Management.
Skip Indicator
0000
Message Type
0X100100
Other information elements
Not checked.
Contents of CONNECT message (SS to MS)
Protocol Discriminator
Call Control.
Transaction Identifier
TI value
As used in the SETUP message.
TI flag
1
Message Type
00000111
All other information elements
Not present.
Contents of CONNECT ACKNOWLEDGE message (MS to SS)
Protocol Discriminator
Call Control.
Transaction Identifier
TI value
As used in the SETUP message.
TI flag
0
Message Type
0X001111
Contents of HANDOVER ACCESS message:
Handover Reference
Equal to the value included in the Handover Command message.
Contents of HANDOVER COMMAND message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101011
Cell Description
- Network Colour Code
1
- Base station Colour Code
Corresponding to target cell
- BCCH Carrier Number
Set to the BCCH carrier number of cell B. (one of 261, 263, 282, 284, 287, 290 or 293).
Channel Description
- Channel Type and TDMA offset
Bm + ACCHs.
- Timeslot Number
Chosen arbitrarily by the test house.
- Training Sequence Code
Chosen arbitrarily by the test house.
- Hopping
Single RF channel.
- ARFCN
Chosen arbitrarily by the test house from those supported on the target cell.
Handover Reference
- Handover Reference Value
Chosen arbitrarily by the test house.
Power Command
- ATC
0 (Sending of Handover Access is mandatory)
- EPC mode (for R5 and after MS only)
0 (Channel not in EPC mode)
- FPC (for R99 and R4 MS only)
0 (FPC not in use)
- FPC_EPC mode (for R5 and after MS only)
0 (FPC or EPC not in use)
- Power level
Chosen arbitrarily by the test house.
All other information elements
Not present.
Contents of HANDOVER COMPLETE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101100
RR cause
Normal event.
Time difference
Not present.
Contents of HANDOVER FAILURE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101000
RR cause
Dependent on the test.
IDENTITY REQUEST
Information element
Value/remark
Identity type
IMEI
Spare half octet
0000
IDENTITY RESPONSE
Information element
Value/remark
Mobile identity
not checked
Contents of IMMEDIATE ASSIGNMENT message:
L2 pseudo length
This is the sum of the lengths of all the information elements present in the message except for the IA rest octets and L2 pseudo length IEs. For the default message the L2 pseudo length is 11.
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00111111
Page Mode
- Page Mode
Normal Paging.
Channel Description
- Channel Type and TDMA offset
For non-combined CCCH/SDCCH (see initial conditions), SDCCH/8, with subchannel chosen arbitrarily by the test house For combined CCCH/SDCCH (default SS conditions), SDCCH/4, with subchannel chosen arbitrarily by the test house.
- Timeslot Number
For non-combined CCCH/SDCCH (see initial conditions), chosen arbitrarily by the test house; For combined CCCH/SDCCH (default SS conditions), SDCCH/4, timeslot zero.
- Training Sequence Code
For non-combined CCCH/SDCCH (see initial conditions), chosen arbitrarily by the test house; For combined CCCH/SDCCH (default SS
conditions), SDCCH/4, TSC=5 (same as the BCC).
- Hopping
Single RF channel.
- ARFCN
For non-combined CCCH/SDCCH (see initial conditions), Channel number 30; For combined CCCH/SDCCH (default SS conditions), SDCCH/4, Channel number 263.
Request Reference
Pertaining to last Channel Request sent by the MS.
Timing Advance
- Timing advance value
30 bit periods.
Mobile Allocation
- Length
0
Starting Time
Not present.
IA rest octets
Not used (all bits set to spare).
Contents of IMMEDIATE ASSIGNMENT EXTENDED message:
L2 pseudo length
This is the sum of the lengths of all the information elements present in the message except for the IAX rest octets and L2 pseudo length IEs. For the default message the L2 pseudo length is 18.
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00111001
Page Mode
- Page Mode
Normal Paging.
Channel Description 1
- Channel Type and TDMA offset
For non-combined CCCH/SDCCH (see test conditions), SDCCH/8, with subchannel chosen arbitrarily by the test house; For combined CCCH/SDCCH (default SS conditions), SDCCH/4, with subchannel chosen arbitrarily by the test house.
- Timeslot Number
For non-combined CCCH/SDCCH (see test conditions), chosen arbitrarily by the test house; For combined CCCH/SDCCH (default SS conditions), SDCCH/4, timeslot zero.
- Training Sequence Code
For non-combined CCCH/SDCCH (see initial conditions), chosen arbitrarily by the test house; For combined CCCH/SDCCH (default SS
conditions), SDCCH/4, TSC=5 (same as the BCC).
- Hopping
Single RF channel.
- ARFCN
For non-combined CCCH/SDCCH (see initial conditions),Channel number 30; For combined CCCH/SDCCH (default SS conditions), SDCCH/4, Channel number 263.
Request Reference 1
Pertaining to last Channel Request sent by the MS.
Timing Advance 1
- Timing advance value
Chosen arbitrarily by the test house.
Channel Description 2
- Channel Type and TDMA offset
Same channel type as in Channel Description 1, but different TDMA offset to that in Channel Description 1.
- Timeslot Number
equal to the value in Channel Description 1.
- Training Sequence Code
equal to the value in Channel Description 1.
- Hopping
Single RF channel.
- ARFCN
equal to the value in Channel Description 1.
Request Reference 2
Not pertaining to any Channel Requests sent by the MS.
Timing Advance 2
- Timing advance value
Chosen arbitrarily by the test house.
Mobile Allocation
- Length
0
Starting Time
Not present.
IAX rest octets
Not used (all bits set to spare).
Contents of IMMEDIATE ASSIGNMENT REJECT message:
L2 pseudo length
19
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00111010
Page Mode
- Page Mode
Normal Paging.
Request Reference
Pertaining to last Channel Request sent by the MS.
Wait Indication
0 s.
Request Reference
Not pertaining to the MS under test.
Wait Indication
0 s.
Request Reference
Not pertaining to the MS under test.
Wait Indication
0 s.
Request Reference
Not pertaining to the MS under test.
Wait Indication
0 s.
IAR rest octets
Not used (all bits set to spare).
Contents of LOCATION UPDATING REQUEST message:
Protocol Discriminator
MM message.
Skip Indicator
0000
Message Type
0X001000
Other information elements
Not checked.
Contents of PAGING REQUEST TYPE 1 message:
L2 pseudo length
This is the sum of the lengths of all the information elements present in the message except for the P1 rest octets and L2 pseudo length IEs. For the default message the L2 pseudo length is 9.
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00100001
Page Mode
- Page Mode
Normal Paging.
Channels needed
- first channel
any channel.
- second channel
any channel.
Mobile Identity 1
- odd/even indication
Even.
- Type of Identity
TMSI.
- Identity Digits
TMSI previously allocated to MS.
Mobile Identity 2
Not present.
P1 rest octets
Not used (all bits set to spare).
Contents of PAGING REQUEST TYPE 2 message:
L2 pseudo length
This is the sum of the lengths of all the information elements present in the message except for the P2 rest octets and L2 pseudo length IEs. For the default message the L2 pseudo length is 11.
Protocol Discriminator
RR Management..
Skip Indicator
0000
Message Type
00100010
Page Mode
- Page Mode
Normal Paging.
Channels needed
- first channel
any channel.
- second channel
any channel.
Mobile Identity 1
- TMSI value
TMSI previously allocated to MS.
Mobile Identity 2
- TMSI value
TMSI not allocated to MS.
Mobile Identity
Not present.
P2 rest octets
Not used (all bits set to spare).
Contents of PAGING REQUEST TYPE 3 message:
L2 pseudo length
19
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00100100
Page Mode
- Page Mode
Normal Paging.
Channels needed
- first channel
any channel.
- second channel
any channel.
Mobile identity 1
- TMSI value
TMSI previously allocated to MS.
Mobile identity 2
- TMSI value
TMSI not allocated to MS.
Mobile identity 3
- TMSI value
TMSI not allocated to MS.
Mobile identity 4
- TMSI value
TMSI not allocated to MS.
P3 rest octets
Not used (all bits set to spare).
Contents of PAGING RESPONSE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00100111
Ciphering Key Sequence Number
- Key Sequence
Key sequence number previously allocated to MS, or "111" if no key is available.
Mobile Station Classmark 2
Mobile Identity
- odd/even indication
Even
- Type of identity
TMSI
- Identity Digits
TMSI previously allocated to MS.
Contents of PHYSICAL INFORMATION message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101101
Timing advance
20 bit periods.
Contents of SETUP message; (MS to SS):
Protocol Discriminator
Call Control.
Transaction Identifier
TI value
any value from the set {0, ..., 6}.
TI flag
0
Message Type
0X000101
Other information elements
Not checked.
26.6.17 Default contents of GSM 480 layer 3 messages for RR tests
This subclause contains the default values of GSM 480 L3 messages, which unless indicated otherwise in subclause 26.6 shall be transmitted by the system simulator and which are required to be received from the GSM 480 MS under test. These values are used in order to be consistent with the phase 2 version of 26.6.
The necessary L3 messages are listed in alphabetic order, with the exception of the SYSTEM INFORMATION messages, where it is the information elements which are listed in alphabetic order (this is because some information elements occur in several SYSTEM INFORMATION types).
In this subclause, decimal values are normally used. However, sometimes a hexadecimal value, indicated by an "H", or a binary value, indicated by a "B" is used.
Default SYSTEM INFORMATION:
NOTE 1: SYSTEM INFORMATION 2 bis, SYSTEM INFORMATION 5 bis, SYSTEM INFORMATION 7, and SYSTEM INFORMATION 8 messages are not used.
Cell A
Contents of information elements in SYSTEM INFORMATION TYPE 1 to 6 messages for cell A.
(CBCH) Channel Description
Not present.
(CBCH) Mobile Allocation
Not present.
Cell Channel Description
- Format identifier
128 range.
- Cell Allocation ARFCN
Channel Numbers 310, 315, 322 and 326.
Cell Identity
- Cell Identity Value
0001H
Cell Options
- Power Control Indicator
Power Control Indicator is not set.
- DTX Indicator
MS shall not use DTX.
- Radio_Link_Timeout
8 SACCH blocks.
Cell Selection Parameters
- Cell_Reselect_Hysteresis
12 dB.
- MX_TXPWR_MAX_CCH
Minimum level.
- ACS
No addition cell parameters are present in SYSTEM INFORMATION messages 7 and 8.
- NECI
New establishment causes not supported.
- RXLEV_ACCESS_MIN
Minimum level.
Control Channel Description
- Attach-Detach allowed
No Attach/Detach.
- BS_AG_BLKS_RES
0 blocks reserved for access grant.
- CCCH_CONF
1 basic physical channel used for CCCH, combined with SDCCHs.
- BS_PA_MFRMS
5 multiframe periods for transmission of paging messages.
- T3212 Time-out value
Infinite.
L2 pseudo length
- System information 1
21
- System information 2
22
- System information 3
18
- System information 4
12
Location Area Identification
- Mobile Country Code
001 decimal
- Mobile Network Code
01 decimal
- Location Area Code
0001H
Message Type
- System information 1
00011001
- System information 2
00011010
- System information 3
00011011
- System information 4
00011100
- System information 5
00011101
- System information 6
00011110
Neighbour Cells Description
- Format identifier
128 range.
- BCCH Allocation Sequence
0
- BCCH Allocation ARFCN
Channels numbers 308, 310, 321, 329, 331, 334, 337 and 340.
- EXT-IND
This IE carries the complete BA.
NCC Permitted
0000 0010
RACH Control Parameters
- Max Retrans
Max 1 retrans.
- Tx-integer
5 slots used.
- Cell Barred for Access
Cell is not barred.
- Call Reestablishment Allowed
Not allowed.
- Access Control Class
Access is not barred.
- Emergency Call allowed
Yes.
SI 1 rest octets
Not used (all bits are set to spare).
SI 2 rest octets
Not used (all bits are set to spare).
SI 3 rest octets
Not used (all bits are set to spare).
SI 4 rest octets
Not used (all bits are set to spare).
Default settings for cell A:
Downlink input level
63 dBmicroVolt emf.
Uplink output power
minimum supported by the MS's power class.
Propagation profile
static.
BCCH/CCCH carrier number
310
Cell B
The contents of SYSTEM INFORMATION TYPE 1 to 6 messages for cell B are identical to those of cell A with the following exceptions:
Cell Channel Description
- Format Identifier
128 range.
- Cell Allocation ARFCN
Channel Number 308.
NOTE 2: This IE needs modification when used in handover tests which command the MS to go to a frequency hopping channel in cell B.
Cell Identity
- Cell Identity Value 0002H
Default settings for cell B:
Downlink input level
53 dBmicroVolt emf.
Uplink output power
minimum supported by the MS's power class.
Propagation profile
static.
BCCH/CCCH carrier number
308
Contents of ALERTING message (SS to MS):
Protocol Discriminator
Call Control.
Transaction Identifier
TI value
As used in the SETUP message.
TI flag
1 (destination side).
Message Type
00000001
All other information elements
Not present.
Contents of ASSIGNMENT COMMAND message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101110
Channel Description
- Channel Type and TDMA offset
Bm + ACCHs
- Timeslot Number
Chosen arbitrarily by the test house.
- Training Sequence Code
Chosen arbitrarily by the test house.
- Hopping
Single RF channel.
- ARFCN
Channel number 315.
Power Command
- ATC
0 (Sending of Handover Access is mandatory)
- EPC mode (for R5 and after MS only)
0 (Channel not in EPC mode)
- FPC (for R99 and R4 MS only)
0 (FPC not in use)
- FPC_EPC mode (for R5 and after MS only)
0 (FPC or EPC not in use)
- Power level
Chosen arbitrarily by the test house.
All other information elements
Not present.
Contents of ASSIGNMENT COMPLETE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101001
RR Cause
- RR Cause Value
Normal event.
Contents of ASSIGNMENT FAILURE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101111
RR Cause
- RR Cause Value
Depending on test.
Contents of AUTHENTICATION REQUEST message:
Protocol Discriminator
MM message.
Skip Indicator
0000
Message Type
00010010
Ciphering Key Sequence Number
- Key Sequence
Chosen arbitrarily by the test house from the range 0 to 6.
Authentication Parameter RAND
- RAND value
Chosen arbitrarily by the test house.
Contents of AUTHENTICATION RESPONSE message:
Protocol Discriminator
MM message.
Skip Indicator
0000
Message Type
0X010100
Other information element(s)
Not checked.
Contents of CALL PROCEEDING message:
Protocol Discriminator
Call Control.
Transaction Identifier
TI value
As used in the SETUP message.
TI flag
1 (destination side).
Message Type
00000010
All other information elements
Not present.
Contents of CHANNEL MODE MODIFY message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00010000
Channel Description
- Channel Type and TDMA offset
Depending on test.
- Timeslot Number
Chosen arbitrarily by the test house.
- Training Sequence Code
Chosen arbitrarily by the test house.
- Hopping
Single RF channel.
- ARFCN
Channel number 315.
Channel Mode
- Mode
Depending on test.
Contents of CHANNEL MODE MODIFY ACKNOWLEDGE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00010111
Channel Description
- Channel Type and TDMA offset
Depending on test.
- Timeslot Number
Same as in the CHANNEL MODE MODIFY message.
- Training Sequence Code
Same as in the CHANNEL MODE MODIFY message.
- Hopping
Single RF channel.
- Frequency Band
Band number 0.
- ARFCN
Channel number 315.
Channel Mode
- Mode
Same as in the CHANNEL MODE MODIFY message.
Contents of CHANNEL RELEASE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00001101
RR Cause
- RR Cause Value
Normal event.
Contents of CHANNEL REQUEST message
Establishment Cause
Not checked.
Random Reference
Not checked.
Contents of CIPHERING MODE COMMAND message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00110101
Cipher Mode Setting
- algorithm identifier
cipher with A5/1.
- SC
Start ciphering.
Cipher Response
IMEI shall not be included.
Contents of CIPHERING MODE COMPLETE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00110010
Mobile Identity
Not present.
Contents of the CLASSMARK CHANGE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
000100110
Mobile Station Classmark 2
See PIXIT.
Mobile Station Classmark 3
For presence and contents see PIXIT.
Contents of CM SERVICE ACCEPT message:
Protocol Discriminator
Mobility Management.
Skip Indicator
0000
Message Type
00100001
Contents of CM SERVICE REQUEST message
Protocol Discriminator
Mobility Management.
Skip Indicator
0000
Message Type
0X100100
Other information elements
Not checked.
Contents of CONNECT message (SS to MS)
Protocol Discriminator
Call Control.
Transaction Identifier
TI value
As used in the SETUP message.
TI flag
1
Message Type
00000111
All other information elements
Not present.
Contents of CONNECT ACKNOWLEDGE message (MS to SS)
Protocol Discriminator
Call Control.
Transaction Identifier
TI value
As used in the SETUP message.
TI flag
0
Message Type
0X001111
Contents of HANDOVER ACCESS message:
Handover Reference
Equal to the value included in the Handover Command message.
Contents of HANDOVER COMMAND message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101011
Cell Description
- Network Colour Code
1
- Base station Colour Code
Corresponding to target cell
- BCCH Carrier Number
Set to the BCCH carrier number of cell B. (one of 308, 310, 329, 331, 334, 337 or 340).
Channel Description
- Channel Type and TDMA offset
Bm + ACCHs.
- Timeslot Number
Chosen arbitrarily by the test house.
- Training Sequence Code
Chosen arbitrarily by the test house.
- Hopping
Single RF channel.
- ARFCN
Chosen arbitrarily by the test house from those supported on the target cell.
Handover Reference
- Handover Reference Value
Chosen arbitrarily by the test house.
Power Command
- ATC
0 (Sending of Handover Access is mandatory)
- EPC mode (for R5 and after MS only)
0 (Channel not in EPC mode)
- FPC (for R99 and R4 MS only)
0 (FPC not in use)
- FPC_EPC mode (for R5 and after MS only)
0 (FPC or EPC not in use)
- Power level
Chosen arbitrarily by the test house.
All other information elements
Not present.
Contents of HANDOVER COMPLETE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101100
RR cause
Normal event.
Time difference
Not present.
Contents of HANDOVER FAILURE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101000
RR cause
Dependent on the test.
IDENTITY REQUEST
Information element
Value/remark
Identity type
IMEI
Spare half octet
0000
IDENTITY RESPONSE
Information element
Value/remark
Mobile identity
not checked
Contents of IMMEDIATE ASSIGNMENT message:
L2 pseudo length
This is the sum of the lengths of all the information elements present in the message except for the IA rest octets and L2 pseudo length IEs. For the default message the L2 pseudo length is 11.
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00111111
Page Mode
- Page Mode
Normal Paging.
Channel Description
- Channel Type and TDMA offset
For non-combined CCCH/SDCCH (see initial conditions), SDCCH/8, with subchannel chosen arbitrarily by the test house For combined CCCH/SDCCH (default SS conditions), SDCCH/4, with subchannel chosen arbitrarily by the test house.
- Timeslot Number
For non-combined CCCH/SDCCH (see initial conditions), chosen arbitrarily by the test house; For combined CCCH/SDCCH (default SS conditions), SDCCH/4, timeslot zero.
- Training Sequence Code
For non-combined CCCH/SDCCH (see initial conditions), chosen arbitrarily by the test house; For combined CCCH/SDCCH (default SS
conditions), SDCCH/4, TSC=5 (same as the BCC).
- Hopping
Single RF channel.
- ARFCN
For non-combined CCCH/SDCCH (see initial conditions), Channel number 30; For combined CCCH/SDCCH (default SS conditions), SDCCH/4, Channel number 310.
Request Reference
Pertaining to last Channel Request sent by the MS.
Timing Advance
- Timing advance value
30 bit periods.
Mobile Allocation
- Length
0
Starting Time
Not present.
IA rest octets
Not used (all bits set to spare).
Contents of IMMEDIATE ASSIGNMENT EXTENDED message:
L2 pseudo length
This is the sum of the lengths of all the information elements present in the message except for the IAX rest octets and L2 pseudo length IEs. For the default message the L2 pseudo length is 18.
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00111001
Page Mode
- Page Mode
Normal Paging.
Channel Description 1
- Channel Type and TDMA offset
For non-combined CCCH/SDCCH (see test conditions), SDCCH/8, with subchannel chosen arbitrarily by the test house; For combined CCCH/SDCCH (default SS conditions), SDCCH/4, with subchannel chosen arbitrarily by the test house.
- Timeslot Number
For non-combined CCCH/SDCCH (see test conditions), chosen arbitrarily by the test house; For combined CCCH/SDCCH (default SS conditions), SDCCH/4, timeslot zero.
- Training Sequence Code
For non-combined CCCH/SDCCH (see initial conditions), chosen arbitrarily by the test house; For combined CCCH/SDCCH (default SS
conditions), SDCCH/4, TSC=5 (same as the BCC).
- Hopping
Single RF channel.
- ARFCN
For non-combined CCCH/SDCCH (see initial conditions),Channel number 30; For combined CCCH/SDCCH (default SS conditions), SDCCH/4, Channel number 310.
Request Reference 1
Pertaining to last Channel Request sent by the MS.
Timing Advance 1
- Timing advance value
Chosen arbitrarily by the test house.
Channel Description 2
- Channel Type and TDMA offset
Same channel type as in Channel Description 1, but different TDMA offset to that in Channel Description 1.
- Timeslot Number
equal to the value in Channel Description 1.
- Training Sequence Code
equal to the value in Channel Description 1.
- Hopping
Single RF channel.
- ARFCN
equal to the value in Channel Description 1.
Request Reference 2
Not pertaining to any Channel Requests sent by the MS.
Timing Advance 2
- Timing advance value
Chosen arbitrarily by the test house.
Mobile Allocation
- Length
0
Starting Time
Not present.
IAX rest octets
Not used (all bits set to spare).
Contents of IMMEDIATE ASSIGNMENT REJECT message:
L2 pseudo length
19
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00111010
Page Mode
- Page Mode
Normal Paging.
Request Reference
Pertaining to last Channel Request sent by the MS.
Wait Indication
0 s.
Request Reference
Not pertaining to the MS under test.
Wait Indication
0 s.
Request Reference
Not pertaining to the MS under test.
Wait Indication
0 s.
Request Reference
Not pertaining to the MS under test.
Wait Indication
0 s.
IAR rest octets
Not used (all bits set to spare).
Contents of LOCATION UPDATING REQUEST message:
Protocol Discriminator
MM message.
Skip Indicator
0000
Message Type
0X001000
Other information elements
Not checked.
Contents of PAGING REQUEST TYPE 1 message:
L2 pseudo length
This is the sum of the lengths of all the information elements present in the message except for the P1 rest octets and L2 pseudo length IEs. For the default message the L2 pseudo length is 9.
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00100001
Page Mode
- Page Mode
Normal Paging.
Channels needed
- first channel
any channel.
- second channel
any channel.
Mobile Identity 1
- odd/even indication
Even.
- Type of Identity
TMSI.
- Identity Digits
TMSI previously allocated to MS.
Mobile Identity 2
Not present.
P1 rest octets
Not used (all bits set to spare).
Contents of PAGING REQUEST TYPE 2 message:
L2 pseudo length
This is the sum of the lengths of all the information elements present in the message except for the P2 rest octets and L2 pseudo length IEs. For the default message the L2 pseudo length is 11.
Protocol Discriminator
RR Management..
Skip Indicator
0000
Message Type
00100010
Page Mode
- Page Mode
Normal Paging.
Channels needed
- first channel
any channel.
- second channel
any channel.
Mobile Identity 1
- TMSI value
TMSI previously allocated to MS.
Mobile Identity 2
- TMSI value
TMSI not allocated to MS.
Mobile Identity
Not present.
P2 rest octets
Not used (all bits set to spare).
Contents of PAGING REQUEST TYPE 3 message:
L2 pseudo length
19
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00100100
Page Mode
- Page Mode
Normal Paging.
Channels needed
- first channel
any channel.
- second channel
any channel.
Mobile identity 1
- TMSI value
TMSI previously allocated to MS.
Mobile identity 2
- TMSI value
TMSI not allocated to MS.
Mobile identity 3
- TMSI value
TMSI not allocated to MS.
Mobile identity 4
- TMSI value
TMSI not allocated to MS.
P3 rest octets
Not used (all bits set to spare).
Contents of PAGING RESPONSE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00100111
Ciphering Key Sequence Number
- Key Sequence
Key sequence number previously allocated to MS, or "111" if no key is available.
Mobile Station Classmark 2
Mobile Identity
- odd/even indication
Even
- Type of identity
TMSI
- Identity Digits
TMSI previously allocated to MS.
Contents of PHYSICAL INFORMATION message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101101
Timing advance
20 bit periods.
Contents of SETUP message; (MS to SS):
Protocol Discriminator
Call Control.
Transaction Identifier
TI value
any value from the set {0, ..., 6}.
TI flag
0
Message Type
0X000101
Other information elements
Not checked.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.18 Default contents of PCS 1 900 layer 3 messages for RR tests
|
This subclause contains the default values of PCS 1 900 L3 messages, which unless indicated otherwise in subclause 26.6 shall be transmitted by the system simulator and which are required to be received from the PCS 1 900 MS under test. These values are used in order to be consistent with the phase 2 version of 26.6.
The necessary L3 messages are listed in alphabetic order, with the exception of the SYSTEM INFORMATION messages, where it is the information elements which are listed in alphabetic order (this is because some information elements occur in several SYSTEM INFORMATION types).
In this subclause, decimal values are normally used. However, sometimes a hexadecimal value, indicated by an "H", or a binary value, indicated by a "B" is used.
Default SYSTEM INFORMATION:
NOTE 1: SYSTEM INFORMATION 2 bis, SYSTEM INFORMATION 7, and SYSTEM INFORMATION 8 messages are not used.
SYSTEM INFORMATION 5 bis is not sent as a default message. For those tests which require SYSTEM INFORMATION 5 bis see the specific message contents for that test.
Cell A
Contents of information elements in SYSTEM INFORMATION TYPE 1 to 6 messages for cell A.
(CBCH) Channel Description
Not present.
(CBCH) Mobile Allocation
Not present.
Cell Channel Description
- Format identifier
Range 512.
- Cell Allocation ARFCN
Channel Numbers, 590, 650, 750 and 780.
Cell Identity
- Cell Identity Value
0001H
Cell Options
- Power Control Indicator
Power Control Indicator is not set, 0
- DTX Indicator
MS shall not use DTX.
- Radio_Link_Timeout
8 SACCH blocks.
Cell Selection Parameters
- Cell_Reselect_Hysteresis
12 dB
- MX_TXPWR_MAX_CCH
Minimum level.
- ACS
No addition cell parameters are present in SYSTEM INFORMATION messages 7 and 8.
- NECI
New establishment causes not supported.
- RXLEV_ACCESS_MIN
Minimum level.
Control Channel Description
- Attach-Detach allowed
MS shall not apply.
- BS_AG_BLKS_RES
0 blocks reserved for access grant.
- CCCH_CONF
1 basic physical channel used for CCCH, combined with SDCCHs.
- BS_PA_MFRMS
5 multiframe periods for transmission of paging messages.
- T3212 Time-out value
Infinite.
L2 pseudo length
- System information 1
21
- System information 2
22
- System information 3
18
- System information 4
12
Location Area Identification
- Mobile Country Code
001 decimal.
- Mobile Network Code
011 decimal.
- Location Area Code
0001H
Message Type
- System information 1
00011001
- System information 2
00011010
- System information 3
00011011
- System information 4
00011100
- System information 5
00011101
- System information 6
00011110
Neighbour Cells Description
- Format identifier
Range 512.
- BCCH Allocation Sequence
0
- BCCH Allocation ARFCN
Channels numbers, 520, 590, 600, 647, 664, 700, 720, 760, 780.
- EXT-IND
This IE carries the complete BA. EXT-IND is 0.
NCC Permitted
0000 0010
RACH Control Parameters
- Max Retrans
Max 1 retrans.
- Tx-integer
5 slots used.
- Cell Barred for Access
Cell is not barred.
- Call Reestablishment Allowed
Not Allowed.
- Access Control Class
Access is not barred.
- Emergency Call allowed
Yes.
SI 1 rest octets
Not used (all bits are set to spare).
SI 2 rest octets
Not used (all bits are set to spare).
SI 3 rest octets
Not used (all bits are set to spare).
SI 4 rest octets
Not used (all bits are set to spare).
Default settings for cell A:
Downlink input level
63 dBmicroVolt emf().
Uplink output power
minimum supported by the MS's power class.
Propagation profile
static.
BCCH/CCCH carrier number
ARFN 590.
Cell B
The contents of SYSTEM INFORMATION TYPE 1 to 6 messages for cell B are identical to those of cell A with the following exceptions:
Cell Channel Description
- Format Identifier
Range 512.
- Cell Allocation ARFCN
Channel Number 520.
NOTE 2: This IE needs modification when used in handover tests which command the MS to go to a frequency hopping channel in cell B.
Cell Identity
- Cell Identity Value
0002H
Default settings for cell B:
Downlink input level
53 dBmicroVolt emf().
Uplink output power
minimum supported by the MS's power class.
Propagation profile
static.
BCCH/CCCH carrier number
520
Contents of ALERTING message (SS to MS):
Protocol Discriminator
Call Control.
Transaction Identifier
TI value
As used in the SETUP message.
TI flag
1 (destination side).
Message Type
00000001
All other information elements
Not present.
Contents of ASSIGNMENT COMMAND message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101110
Channel Description
- Channel Type and TDMA offset
Bm + ACCHs.
- Timeslot Number
Chosen arbitrarily by the test house.
- Training Sequence Code
Chosen arbitrarily by the test house.
- Hopping
Single RF channel.
- ARFCN
Channel number 650.
Power Command
- EPC mode (for R5 and after MS only)
0 (Channel not in EPC mode)
- FPC (for R99 and R4 MS only)
0 (FPC not in use)
- FPC_EPC mode (for R5 and after MS only)
0 (FPC or EPC not in use)
- Power level
Chosen arbitrarily by the test house.
All other information elements
Not present.
Contents of ASSIGNMENT COMPLETE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101001
RR Cause
- RR Cause Value
Normal event.
Contents of ASSIGNMENT FAILURE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101111
RR Cause
- RR Cause Value
Depending on test.
Contents of AUTHENTICATION REQUEST message:
Protocol Discriminator
MM message.
Skip Indicator
0000
Message Type
00010010
Ciphering Key Sequence Number
- Key Sequence
Chosen arbitrarily by the test house from the range 0 to 6.
Authentication Parameter RAND
- RAND value
Chosen arbitrarily by the test house.
Contents of AUTHENTICATION RESPONSE message:
Protocol Discriminator
MM message.
Skip Indicator
0000
Message Type
0X010100
Other information element(s)
Not checked.
Contents of CALL PROCEEDING message:
Protocol Discriminator
Call Control.
Transaction Identifier
TI value
As used in the SETUP message.
TI flag
1 (destination side).
Message Type
00000010
All other information elements
Not present.
Contents of CHANNEL MODE MODIFY message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00010000
Channel Description
- Channel Type and TDMA offset
Depending on test.
- Timeslot Number
Chosen arbitrarily by the test house.
- Training Sequence Code
Chosen arbitrarily by the test house.
- Hopping
Single RF channel.
- ARFCN
Channel number 650.
Channel Mode
- Mode
Depending on test.
Contents of CHANNEL MODE MODIFY ACKNOWLEDGE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00010111
Channel Description
- Channel Type and TDMA offset
Depending on test.
- Timeslot Number
Same as in the CHANNEL MODE MODIFY message.
- Training Sequence Code
Same as in the CHANNEL MODE MODIFY message.
- Hopping
Single RF channel.
- Frequency Band
Band number 0.
- ARFCN
Channel number 650.
Channel Mode
- Mode
Same as in the CHANNEL MODE MODIFY message.
Contents of CHANNEL RELEASE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00001101
RR Cause
- RR Cause Value
Normal event.
Contents of CHANNEL REQUEST message:
Establishment Cause
Not checked.
Random Reference
Not checked.
Contents of CIPHERING MODE COMMAND message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00110101
Cipher Mode Setting
- algorithm identifier
cipher with A5/1.
- SC
Start ciphering.
Cipher Response
IMEI shall not be included.
Contents of CIPHERING MODE COMPLETE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00110010
Mobile Identity
Not present.
Contents of the CLASSMARK CHANGE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
000100110
Mobile Station Classmark 2
- RF Power Capability
See PIXIT.
- Frequency Capability
Set to 0.
Mobile Station Classmark 3
For presence and contents see PIXIT.
Contents of CM SERVICE ACCEPT message:
Protocol Discriminator
Mobility Management.
Skip Indicator
0000
Message Type
00100001
Contents of CM SERVICE REQUEST message:
Protocol Discriminator
Mobility Management.
Skip Indicator
0000
Message Type
0X100100
Other information elements
Not checked.
Contents of CONNECT message (SS to MS):
Protocol Discriminator
Call Control.
Transaction Identifier
TI value
As used in the SETUP message.
TI flag
1
Message Type
00000111
All other information elements
Not present.
Contents of CONNECT ACKNOWLEDGE message (MS to SS):
Protocol Discriminator
Call Control.
Transaction Identifier
TI value
As used in the SETUP message.
TI flag
0
Message Type
0X001111
Contents of HANDOVER ACCESS message:
Handover Reference
Equal to the value included in the Handover Command message.
Contents of HANDOVER COMMAND message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101011
Cell Description
- Network Colour Code
1
- Base station Colour Code
5
- BCCH Carrier Number
Set to the BCCH carrier number of cell B. (one of 520, 590, 600, 700, 720, 760 or 780).
Channel Description
- Channel Type and TDMA offset
Bm + ACCHs.
- Timeslot Number
Chosen arbitrarily by the test house.
- Training Sequence Code
Chosen arbitrarily by the test house.
- Hopping
Single RF channel.
- ARFCN
Chosen arbitrarily by the test house from those supported on the target cell.
Handover Reference
- Handover Reference Value
Chosen arbitrarily by the test house.
Power Command
- ATC
0 (Sending of Handover Access is mandatory)
- EPC mode (for R5 and after MS only)
0 (Channel not in EPC mode)
- FPC (for R99 and R4 MS only)
0 (FPC not in use)
- FPC_EPC mode (for R5 and after MS only)
0 (FPC or EPC not in use)
- Power level
Chosen arbitrarily by the test house.
All other information elements
Not present.
Contents of HANDOVER COMPLETE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101100
RR cause
Normal event.
Time difference
Not present.
Contents of HANDOVER FAILURE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101000
RR cause
Dependent on the test.
Contents of IMMEDIATE ASSIGNMENT message:
L2 pseudo length
This is the sum of the lengths of all the information elements present in the message except for the IA rest octets and L2 pseudo length IEs. For the default message the L2 pseudo length is 11.
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00111111
Page Mode
- Page Mode
Normal Paging.
Channel Description
- Channel Type and TDMA offset
For non-combined CCCH/SDCCH (see initial conditions), SDCCH/8, with subchannel chosen arbitrarily by the test house For combined CCCH/SDCCH (default SS conditions), SDCCH/4, with subchannel chosen arbitrarily by the test house.
- Timeslot Number
For non-combined CCCH/SDCCH (see initial conditions), chosen arbitrarily by the test house; For combined CCCH/SDCCH (default SS conditions), SDCCH/4, timeslot zero.
- Training Sequence Code
For non-combined CCCH/SDCCH (see initial conditions), chosen arbitrarily by the test house; For combined CCCH/SDCCH (default SS
conditions), SDCCH/4, TSC=5 (same as the BCC).
- Hopping
Single RF channel.
- ARFCN
For non-combined CCCH/SDCCH (see initial conditions), Channel number 650; For combined CCCH/SDCCH (default SS conditions), SDCCH/4, Channel number 590.
Request Reference
Pertaining to last Channel Request sent by the MS.
Timing Advance
- Timing advance value
30 bit periods.
Mobile Allocation
- Length
0
Starting Time
Not present.
IA rest octets
Not used (all bits set to spare).
Contents of IMMEDIATE ASSIGNMENT EXTENDED message:
L2 pseudo length
This is the sum of the lengths of all the information elements present in the message except for the IAX rest octets and L2 pseudo length IEs. For the default message the L2 pseudo length is 18.
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00111001
Page Mode
- Page Mode
Normal Paging.
Channel Description 1
- Channel Type and TDMA offset
For non-combined CCCH/SDCCH (see test conditions), SDCCH/8, with subchannel chosen arbitrarily by the test house; For combined CCCH/SDCCH (default SS conditions), SDCCH/4, with subchannel chosen arbitrarily by the test house.
- Timeslot Number
For non-combined CCCH/SDCCH (see test conditions), chosen arbitrarily by the test house; For combined CCCH/SDCCH (default SS conditions), SDCCH/4, timeslot zero.
- Training Sequence Code
For non-combined CCCH/SDCCH (see initial conditions), chosen arbitrarily by the test house; For combined CCCH/SDCCH (default SS
conditions), SDCCH/4, TSC=5 (same as the BCC).
- Hopping
Single RF channel.
- ARFCN
For non-combined CCCH/SDCCH (see initial conditions),Channel number 650; For combined CCCH/SDCCH (default SS conditions), SDCCH/4, Channel number 590.
Request Reference 1
Pertaining to last Channel Request sent by the MS.
Timing Advance 1
- Timing advance value
Chosen arbitrarily by the test house.
Channel Description 2
- Channel Type and TDMA offset
Same channel type as in Channel Description 1, but different TDMA offset to that in Channel Description 1.
- Timeslot Number
equal to the value in Channel Description 1.
- Training Sequence Code
equal to the value in Channel Description 1.
- Hopping
Single RF channel.
- ARFCN
equal to the value in Channel Description 1.
Request Reference 2
Not pertaining to any Channel Requests sent by the MS.
Timing Advance 2
- Timing advance value
Chosen arbitrarily by the test house.
Mobile Allocation
- Length
0
Starting Time
Not present.
IAX rest octets
Not used (all bits set to spare).
Contents of IMMEDIATE ASSIGNMENT REJECT message:
L2 pseudo length
19
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00111010
Page Mode
- Page Mode
Normal Paging.
Request Reference
Pertaining to last Channel Request sent by the MS.
Wait Indication
0 s.
Request Reference
Not pertaining to the MS under test.
Wait Indication
0 s.
Request Reference
Not pertaining to the MS under test.
Wait Indication
0 s.
Request Reference
Not pertaining to the MS under test.
Wait Indication
0 s.
IAR rest octets
Not used (all bits set to spare).
Contents of LOCATION UPDATING REQUEST message:
Protocol Discriminator
MM message.
Skip Indicator
0000
Message Type
0X001000
Other information elements
Not checked.
Contents of PAGING REQUEST TYPE 1 message:
L2 pseudo length
This is the sum of the lengths of all the information elements present in the message except for the P1 rest octets and L2 pseudo length IEs. For the default message the L2 pseudo length is 9.
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00100001
Page Mode
- Page Mode
Normal Paging.
Channels needed
- first channel
any channel.
- second channel
any channel.
Mobile Identity 1
- odd/even indication
Even.
- Type of Identity
TMSI.
- Identity Digits
TMSI previously allocated to MS.
Mobile Identity 2
Not present.
P1 rest octets
Not used (all bits set to spare).
Contents of PAGING REQUEST TYPE 2 message:
L2 pseudo length
This is the sum of the lengths of all the information elements present in the message except for the P2 rest octets and L2 pseudo length IEs. For the default message the L2 pseudo length is 11.
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00100010
Page Mode
- Page Mode
Normal Paging.
Channels needed
- first channel
any channel.
- second channel
any channel.
Mobile Identity 1
- TMSI value
TMSI previously allocated to MS.
Mobile Identity 2
- TMSI value
TMSI not allocated to MS.
Mobile Identity
Not present.
P2 rest octets
Not used (all bits set to spare).
Contents of PAGING REQUEST TYPE 3 message:
L2 pseudo length
19
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00100100
Page Mode
- Page Mode
Normal Paging.
Channels needed
- first channel
any channel.
- second channel
any channel.
Mobile identity 1
- TMSI value
TMSI previously allocated to MS.
Mobile identity 2
- TMSI value
TMSI not allocated to MS.
Mobile identity 3
- TMSI value
TMSI not allocated to MS.
Mobile identity 4
- TMSI value
TMSI not allocated to MS.
P3 rest octets
Not used (all bits set to spare).
Contents of PAGING RESPONSE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00100111
Ciphering Key Sequence Number
- Key Sequence
Key sequence number previously allocated to MS, or "111" if no key is available.
Mobile Station Classmark 2
Mobile Identity
- odd/even indication
Even.
- Type of identity
TMSI
- Identity Digits
TMSI previously allocated to MS.
Contents of PHYSICAL INFORMATION message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101101
Timing advance
20 bit periods.
Contents of SETUP message; (MS to SS):
Protocol Discriminator
Call Control.
Transaction Identifier
TI value
any value from the set {0, ..., 6}.
TI flag
0
Message Type
0X000101
Other information elements
Not checked.
26.6.19 Default contents of GSM 750 layer 3 messages for RR tests
This subclause contains the default values of GSM 750 L3 messages, which unless indicated otherwise in subclause 26.6 shall be transmitted by the system simulator and which are required to be received from the GSM 750 MS under test. These values are used in order to be consistent with the phase 2 version of 26.6.
The necessary L3 messages are listed in alphabetic order, with the exception of the SYSTEM INFORMATION messages, where it is the information elements which are listed in alphabetic order (this is because some information elements occur in several SYSTEM INFORMATION types).
In this subclause, decimal values are normally used. However, sometimes a hexadecimal value, indicated by an "H", or a binary value, indicated by a "B" is used.
Default SYSTEM INFORMATION:
NOTE 1: SYSTEM INFORMATION 2 bis, SYSTEM INFORMATION 5 bis, SYSTEM INFORMATION 7, and SYSTEM INFORMATION 8 messages are not used.
Cell A
Contents of information elements in SYSTEM INFORMATION TYPE 1 to 6 messages for cell A.
(CBCH) Channel Description
Not present.
(CBCH) Mobile Allocation
Not present.
Cell Channel Description
- Format identifier
128 range.
- Cell Allocation ARFCN
Channel Numbers 457, 467, 470 and 475.
Cell Identity
- Cell Identity Value
0001H
Cell Options
- Power Control Indicator
Power Control Indicator is not set.
- DTX Indicator
MS shall not use DTX.
- Radio_Link_Timeout
8 SACCH blocks.
Cell Selection Parameters
- Cell_Reselect_Hysteresis
12 dB.
- MX_TXPWR_MAX_CCH
Minimum level.
- ACS
No addition cell parameters are present in SYSTEM INFORMATION messages 7 and 8.
- NECI
New establishment causes not supported.
- RXLEV_ACCESS_MIN
Minimum level.
Control Channel Description
- Attach-Detach allowed
No Attach/Detach.
- BS_AG_BLKS_RES
0 blocks reserved for access grant.
- CCCH_CONF
1 basic physical channel used for CCCH, combined with SDCCHs.
- BS_PA_MFRMS
5 multiframe periods for transmission of paging messages.
- T3212 Time-out value
Infinite.
L2 pseudo length
- System information 1
21
- System information 2
22
- System information 3
18
- System information 4
12
Location Area Identification
- Mobile Country Code
001 decimal
- Mobile Network Code
01 decimal
- Location Area Code
0001H
Message Type
- System information 1
00011001
- System information 2
00011010
- System information 3
00011011
- System information 4
00011100
- System information 5
00011101
- System information 6
00011110
Neighbour Cells Description
- Format identifier
Range 128.
- BCCH Allocation Sequence
0
- BCCH Allocation ARFCN
Channels numbers 447, 457, 477, 480, 499, 504, 507 and 510.
- EXT-IND
This IE carries the complete BA.
NCC Permitted
0000 0010
RACH Control Parameters
- Max Retrans
Max 1 retrans.
- Tx-integer
5 slots used.
- Cell Barred for Access
Cell is not barred.
- Call Reestablishment Allowed
Not allowed.
- Access Control Class
Access is not barred.
- Emergency Call allowed
Yes.
SI 1 rest octets
Not used (all bits are set to spare).
SI 2 rest octets
Not used (all bits are set to spare).
SI 3 rest octets
Not used (all bits are set to spare).
SI 4 rest octets
Not used (all bits are set to spare).
Default settings for cell A:
Downlink input level
63 dBmicroVolt emf.
Uplink output power
Minimum supported by the MS's power class.
Propagation profile
static.
BCCH/CCCH carrier number
457
Cell B
The contents of SYSTEM INFORMATION TYPE 1 to 6 messages for cell B are identical to those of cell A with the following exceptions:
Cell Channel Description
- Format Identifier
128 range.
- Cell Allocation ARFCN
Channel Number 447.
NOTE 2: This IE needs modification when used in handover tests which command the MS to go to a frequency hopping channel in cell B.
Cell Identity
- Cell Identity Value 0002H
Default settings for cell B:
Downlink input level
53 dBmicroVolt emf.
Uplink output power
minimum supported by the MS's power class.
Propagation profile
static.
BCCH/CCCH carrier number
447
Contents of ALERTING message (SS to MS):
Protocol Discriminator
Call Control.
Transaction Identifier
TI value
As used in the SETUP message.
TI flag
1 (destination side).
Message Type
00000001
All other information elements
Not present.
Contents of ASSIGNMENT COMMAND message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101110
Channel Description
- Channel Type and TDMA offset
Bm + ACCHs
- Timeslot Number
Chosen arbitrarily by the test house.
- Training Sequence Code
Chosen arbitrarily by the test house.
- Hopping
Single RF channel.
- ARFCN
Channel number 467.
Power Command
- EPC mode (for R5 and after MS only)
0 (Channel not in EPC mode)
- FPC (for R99 and R4 MS only)
0 (FPC not in use)
- FPC_EPC mode (for R5 and after MS only)
0 (FPC or EPC not in use)
- Power level
Chosen arbitrarily by the test house.
All other information elements
Not present.
Contents of ASSIGNMENT COMPLETE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101001
RR Cause
- RR Cause Value
Normal event.
Contents of ASSIGNMENT FAILURE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101111
RR Cause
- RR Cause Value
Depending on test.
Contents of AUTHENTICATION REQUEST message:
Protocol Discriminator
MM message.
Skip Indicator
0000
Message Type
00010010
Ciphering Key Sequence Number
- Key Sequence
Chosen arbitrarily by the test house from the range 0 to 6.
Authentication Parameter RAND
- RAND value
Chosen arbitrarily by the test house.
Contents of AUTHENTICATION RESPONSE message:
Protocol Discriminator
MM message.
Skip Indicator
0000
Message Type
0X010100
Other information element(s)
Not checked.
Contents of CALL PROCEEDING message:
Protocol Discriminator
Call Control.
Transaction Identifier
TI value
As used in the SETUP message.
TI flag
1 (destination side).
Message Type
00000010
All other information elements
Not present.
Contents of CHANNEL MODE MODIFY message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00010000
Channel Description
- Channel Type and TDMA offset
Depending on test.
- Timeslot Number
Chosen arbitrarily by the test house.
- Training Sequence Code
Chosen arbitrarily by the test house.
- Hopping
Single RF channel.
- ARFCN
Channel number 467.
Channel Mode
- Mode
Depending on test.
Contents of CHANNEL MODE MODIFY ACKNOWLEDGE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00010111
Channel Description
- Channel Type and TDMA offset
Depending on test.
- Timeslot Number
Same as in the CHANNEL MODE MODIFY message.
- Training Sequence Code
Same as in the CHANNEL MODE MODIFY message.
- Hopping
Single RF channel.
- Frequency Band
Band number 0.
- ARFCN
Channel number 467.
Channel Mode
- Mode
Same as in the CHANNEL MODE MODIFY message.
Contents of CHANNEL RELEASE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00001101
RR Cause
- RR Cause Value
Normal event.
Contents of CHANNEL REQUEST message
Establishment Cause
Not checked.
Random Reference
Not checked.
Contents of CIPHERING MODE COMMAND message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00110101
Cipher Mode Setting
- algorithm identifier
cipher with A5/1.
- SC
Start ciphering.
Cipher Response
IMEI shall not be included.
Contents of CIPHERING MODE COMPLETE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00110010
Mobile Identity
Not present.
Contents of the CLASSMARK CHANGE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
000100110
Mobile Station Classmark 2
See PIXIT.
Mobile Station Classmark 3
For presence and contents see PIXIT.
Contents of CM SERVICE ACCEPT message:
Protocol Discriminator
Mobility Management.
Skip Indicator
0000
Message Type
00100001
Contents of CM SERVICE REQUEST message
Protocol Discriminator
Mobility Management.
Skip Indicator
0000
Message Type
0X100100
Other information elements
Not checked.
Contents of CONNECT message (SS to MS)
Protocol Discriminator
Call Control.
Transaction Identifier
TI value
As used in the SETUP message.
TI flag
1
Message Type
00000111
All other information elements
Not present.
Contents of CONNECT ACKNOWLEDGE message (MS to SS)
Protocol Discriminator
Call Control.
Transaction Identifier
TI value
As used in the SETUP message.
TI flag
0
Message Type
0X001111
Contents of HANDOVER ACCESS message:
Handover Reference
Equal to the value included in the Handover Command message.
Contents of HANDOVER COMMAND message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101011
Cell Description
- Network Colour Code
1
- Base station Colour Code
Corresponding to target cell
- BCCH Carrier Number
Set to the BCCH carrier number of cell B. (one of 447, 457, 480, 499, 504, 507 or 510).
Channel Description
- Channel Type and TDMA offset
Bm + ACCHs.
- Timeslot Number
Chosen arbitrarily by the test house.
- Training Sequence Code
Chosen arbitrarily by the test house.
- Hopping
Single RF channel.
- ARFCN
Chosen arbitrarily by the test house from those supported on the target cell.
Handover Reference
- Handover Reference Value
Chosen arbitrarily by the test house.
Power Command
- ATC
0 (Sending of Handover Access is mandatory)
- EPC mode (for R5 and after MS only)
0 (Channel not in EPC mode)
- FPC (for R99 and R4 MS only)
0 (FPC not in use)
- FPC_EPC mode (for R5 and after MS only)
0 (FPC or EPC not in use)
- Power level
Chosen arbitrarily by the test house.
All other information elements
Not present.
Contents of HANDOVER COMPLETE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101100
RR cause
Normal event.
Time difference
Not present.
Contents of HANDOVER FAILURE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101000
RR cause
Dependent on the test.
IDENTITY REQUEST
Information element
Value/remark
Identity type
IMEI
Spare half octet
0000
IDENTITY RESPONSE
Information element
Value/remark
Mobile identity
not checked
Contents of IMMEDIATE ASSIGNMENT message:
L2 pseudo length
This is the sum of the lengths of all the information elements present in the message except for the IA rest octets and L2 pseudo length IEs. For the default message the L2 pseudo length is 11.
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00111111
Page Mode
- Page Mode
Normal Paging.
Channel Description
- Channel Type and TDMA offset
For non-combined CCCH/SDCCH (see initial conditions), SDCCH/8, with subchannel chosen arbitrarily by the test house For combined CCCH/SDCCH (default SS conditions), SDCCH/4, with subchannel chosen arbitrarily by the test house.
- Timeslot Number
For non-combined CCCH/SDCCH (see initial conditions), chosen arbitrarily by the test house; For combined CCCH/SDCCH (default SS conditions), SDCCH/4, timeslot zero.
- Training Sequence Code
For non-combined CCCH/SDCCH (see initial conditions), chosen arbitrarily by the test house; For combined CCCH/SDCCH (default SS
conditions), SDCCH/4, TSC=5 (same as the BCC).
- Hopping
Single RF channel.
- ARFCN
For non-combined CCCH/SDCCH (see initial conditions), Channel number 467; For combined CCCH/SDCCH (default SS conditions), SDCCH/4, Channel number 457.
Request Reference
Pertaining to last Channel Request sent by the MS.
Timing Advance
- Timing advance value
30 bit periods.
Mobile Allocation
- Length
0
Starting Time
Not present.
IA rest octets
Not used (all bits set to spare).
Contents of IMMEDIATE ASSIGNMENT EXTENDED message:
L2 pseudo length
This is the sum of the lengths of all the information elements present in the message except for the IAX rest octets and L2 pseudo length IEs. For the default message the L2 pseudo length is 18.
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00111001
Page Mode
- Page Mode
Normal Paging.
Channel Description 1
- Channel Type and TDMA offset
For non-combined CCCH/SDCCH (see test conditions), SDCCH/8, with subchannel chosen arbitrarily by the test house; For combined CCCH/SDCCH (default SS conditions), SDCCH/4, with subchannel chosen arbitrarily by the test house.
- Timeslot Number
For non-combined CCCH/SDCCH (see test conditions), chosen arbitrarily by the test house; For combined CCCH/SDCCH (default SS conditions), SDCCH/4, timeslot zero.
- Training Sequence Code
For non-combined CCCH/SDCCH (see initial conditions), chosen arbitrarily by the test house; For combined CCCH/SDCCH (default SS
conditions), SDCCH/4, TSC=5 (same as the BCC).
- Hopping
Single RF channel.
- ARFCN
For non-combined CCCH/SDCCH (see initial conditions),Channel number 467; For combined CCCH/SDCCH (default SS conditions), SDCCH/4, Channel number 457.
Request Reference 1
Pertaining to last Channel Request sent by the MS.
Timing Advance 1
- Timing advance value
Chosen arbitrarily by the test house.
Channel Description 2
- Channel Type and TDMA offset
Same channel type as in Channel Description 1, but different TDMA offset to that in Channel Description 1.
- Timeslot Number
equal to the value in Channel Description 1.
- Training Sequence Code
equal to the value in Channel Description 1.
- Hopping
Single RF channel.
- ARFCN
equal to the value in Channel Description 1.
Request Reference 2
Not pertaining to any Channel Requests sent by the MS.
Timing Advance 2
- Timing advance value
Chosen arbitrarily by the test house.
Mobile Allocation
- Length
0
Starting Time
Not present.
IAX rest octets
Not used (all bits set to spare).
Contents of IMMEDIATE ASSIGNMENT REJECT message:
L2 pseudo length
19
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00111010
Page Mode
- Page Mode
Normal Paging.
Request Reference
Pertaining to last Channel Request sent by the MS.
Wait Indication
0 s.
Request Reference
Not pertaining to the MS under test.
Wait Indication
0 s.
Request Reference
Not pertaining to the MS under test.
Wait Indication
0 s.
Request Reference
Not pertaining to the MS under test.
Wait Indication
0 s.
IAR rest octets
Not used (all bits set to spare).
Contents of LOCATION UPDATING REQUEST message:
Protocol Discriminator
MM message.
Skip Indicator
0000
Message Type
0X001000
Other information elements
Not checked.
Contents of PAGING REQUEST TYPE 1 message:
L2 pseudo length
This is the sum of the lengths of all the information elements present in the message except for the P1 rest octets and L2 pseudo length IEs. For the default message the L2 pseudo length is 9.
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00100001
Page Mode
- Page Mode
Normal Paging.
Channels needed
- first channel
any channel.
- second channel
any channel.
Mobile Identity 1
- odd/even indication
Even.
- Type of Identity
TMSI.
- Identity Digits
TMSI previously allocated to MS.
Mobile Identity 2
Not present.
P1 rest octets
Not used (all bits set to spare).
Contents of PAGING REQUEST TYPE 2 message:
L2 pseudo length
This is the sum of the lengths of all the information elements present in the message except for the P2 rest octets and L2 pseudo length IEs. For the default message the L2 pseudo length is 11.
Protocol Discriminator
RR Management..
Skip Indicator
0000
Message Type
00100010
Page Mode
- Page Mode
Normal Paging.
Channels needed
- first channel
any channel.
- second channel
any channel.
Mobile Identity 1
- TMSI value
TMSI previously allocated to MS.
Mobile Identity 2
- TMSI value
TMSI not allocated to MS.
Mobile Identity
Not present.
P2 rest octets
Not used (all bits set to spare).
Contents of PAGING REQUEST TYPE 3 message:
L2 pseudo length
19
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00100100
Page Mode
- Page Mode
Normal Paging.
Channels needed
- first channel
any channel.
- second channel
any channel.
Mobile identity 1
- TMSI value
TMSI previously allocated to MS.
Mobile identity 2
- TMSI value
TMSI not allocated to MS.
Mobile identity 3
- TMSI value
TMSI not allocated to MS.
Mobile identity 4
- TMSI value
TMSI not allocated to MS.
P3 rest octets
Not used (all bits set to spare).
Contents of PAGING RESPONSE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00100111
Ciphering Key Sequence Number
- Key Sequence
Key sequence number previously allocated to MS, or "111" if no key is available.
Mobile Station Classmark 2
Mobile Identity
- odd/even indication
Even
- Type of identity
TMSI
- Identity Digits
TMSI previously allocated to MS.
Contents of PHYSICAL INFORMATION message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101101
Timing advance
20 bit periods.
Contents of SETUP message; (MS to SS):
Protocol Discriminator
Call Control.
Transaction Identifier
TI value
any value from the set {0, ..., 6}.
TI flag
0
Message Type
0X000101
Other information elements
Not checked.
26.6.20 Default contents of GSM 850 layer 3 messages for RR tests
This subclause contains the default values of GSM 850 L3 messages, which unless indicated otherwise in subclause 26.6 shall be transmitted by the system simulator and which are required to be received from the GSM 850 MS under test. These values are used in order to be consistent with the phase 2 version of 26.6.
The necessary L3 messages are listed in alphabetic order, with the exception of the SYSTEM INFORMATION messages, where it is the information elements which are listed in alphabetic order (this is because some information elements occur in several SYSTEM INFORMATION types).
In this subclause, decimal values are normally used. However, sometimes a hexadecimal value, indicated by an "H", or a binary value, indicated by a "B" is used.
Default SYSTEM INFORMATION:
NOTE 1: SYSTEM INFORMATION 2 bis, SYSTEM INFORMATION 5 bis, SYSTEM INFORMATION 7, and SYSTEM INFORMATION 8 messages are not used.
Cell A
Contents of information elements in SYSTEM INFORMATION TYPE 1 to 6 messages for cell A.
(CBCH) Channel Description
Not present.
(CBCH) Mobile Allocation
Not present.
Cell Channel Description
- Format identifier
128 range.
- Cell Allocation ARFCN
Channel Numbers 147, 157, 177 and 197.
Cell Identity
- Cell Identity Value
0001H
Cell Options
- Power Control Indicator
Power Control Indicator is not set.
- DTX Indicator
MS shall not use DTX.
- Radio_Link_Timeout
8 SACCH blocks.
Cell Selection Parameters
- Cell_Reselect_Hysteresis
12 dB.
- MX_TXPWR_MAX_CCH
Minimum level.
- ACS
No addition cell parameters are present in SYSTEM INFORMATION messages 7 and 8.
- NECI
New establishment causes not supported.
- RXLEV_ACCESS_MIN
Minimum level.
Control Channel Description
- Attach-Detach allowed
No Attach/Detach.
- BS_AG_BLKS_RES
0 blocks reserved for access grant.
- CCCH_CONF
1 basic physical channel used for CCCH, combined with SDCCHs.
- BS_PA_MFRMS
5 multiframe periods for transmission of paging messages.
- T3212 Time-out value
Infinite.
L2 pseudo length
- System information 1
21
- System information 2
22
- System information 3
18
- System information 4
12
Location Area Identification
- Mobile Country Code
001 decimal
- Mobile Network Code
01 decimal
- Location Area Code
0001H
Message Type
- System information 1
00011001
- System information 2
00011010
- System information 3
00011011
- System information 4
00011100
- System information 5
00011101
- System information 6
00011110
Neighbour Cells Description
- Format identifier
128 range.
- BCCH Allocation Sequence
0
- BCCH Allocation ARFCN
Channels numbers 137, 147, 167, 207, 217, 227, 237 and 247.
- EXT-IND
This IE carries the complete BA.
NCC Permitted
0000 0010
RACH Control Parameters
- Max Retrans
Max 1 retrans.
- Tx-integer
5 slots used.
- Cell Barred for Access
Cell is not barred.
- Call Reestablishment Allowed
Not allowed.
- Access Control Class
Access is not barred.
- Emergency Call allowed
Yes.
SI 1 rest octets
Not used (all bits are set to spare).
SI 2 rest octets
Not used (all bits are set to spare).
SI 3 rest octets
Not used (all bits are set to spare).
SI 4 rest octets
Not used (all bits are set to spare).
SI 6 rest octets
2B2B2B2B2B2B2B
Default settings for cell A:
Downlink input level
63 dBmicroVolt emf.
Uplink output power
minimum supported by the MS's power class.
Propagation profile
static.
BCCH/CCCH carrier number
147
Cell B
The contents of SYSTEM INFORMATION TYPE 1 to 6 messages for cell B are identical to those of cell A with the following exceptions:
Cell Channel Description
- Format Identifier
128 range.
- Cell Allocation ARFCN
Channel Number 137.
NOTE 2: This IE needs modification when used in handover tests which command the MS to go to a frequency hopping channel in cell B.
Cell Identity
- Cell Identity Value 0002H
Default settings for cell B:
Downlink input level
53 dBmicroVolt emf.
Uplink output power
minimum supported by the MS's power class.
Propagation profile
static.
BCCH/CCCH carrier number
137
Contents of ALERTING message (SS to MS):
Protocol Discriminator
Call Control.
Transaction Identifier
TI value
As used in the SETUP message.
TI flag
1 (destination side).
Message Type
00000001
All other information elements
Not present.
Contents of ASSIGNMENT COMMAND message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101110
Channel Description
- Channel Type and TDMA offset
Bm + ACCHs
- Timeslot Number
Chosen arbitrarily by the test house.
- Training Sequence Code
Chosen arbitrarily by the test house.
- Hopping
Single RF channel.
- ARFCN
Channel number 157.
Power Command
- EPC mode (for R5 and after MS only)
0 (Channel not in EPC mode)
- FPC (for R99 and R4 MS only)
0 (FPC not in use)
- FPC_EPC mode (for R5 and after MS only)
0 (FPC or EPC not in use)
- Power level
Chosen arbitrarily by the test house.
All other information elements
Not present.
Contents of ASSIGNMENT COMPLETE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101001
RR Cause
- RR Cause Value
Normal event.
Contents of ASSIGNMENT FAILURE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101111
RR Cause
- RR Cause Value
Depending on test.
Contents of AUTHENTICATION REQUEST message:
Protocol Discriminator
MM message.
Skip Indicator
0000
Message Type
00010010
Ciphering Key Sequence Number
- Key Sequence
Chosen arbitrarily by the test house from the range 0 to 6.
Authentication Parameter RAND
- RAND value
Chosen arbitrarily by the test house.
Contents of AUTHENTICATION RESPONSE message:
Protocol Discriminator
MM message.
Skip Indicator
0000
Message Type
0X010100
Other information element(s)
Not checked.
Contents of CALL PROCEEDING message:
Protocol Discriminator
Call Control.
Transaction Identifier
TI value
As used in the SETUP message.
TI flag
1 (destination side).
Message Type
00000010
All other information elements
Not present.
Contents of CHANNEL MODE MODIFY message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00010000
Channel Description
- Channel Type and TDMA offset
Depending on test.
- Timeslot Number
Chosen arbitrarily by the test house.
- Training Sequence Code
Chosen arbitrarily by the test house.
- Hopping
Single RF channel.
- ARFCN
Channel number 157.
Channel Mode
- Mode
Depending on test.
Contents of CHANNEL MODE MODIFY ACKNOWLEDGE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00010111
Channel Description
- Channel Type and TDMA offset
Depending on test.
- Timeslot Number
Same as in the CHANNEL MODE MODIFY message.
- Training Sequence Code
Same as in the CHANNEL MODE MODIFY message.
- Hopping
Single RF channel.
- Frequency Band
Band number 0.
- ARFCN
Channel number 157.
Channel Mode
- Mode
Same as in the CHANNEL MODE MODIFY message.
Contents of CHANNEL RELEASE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00001101
RR Cause
- RR Cause Value
Normal event.
Contents of CHANNEL REQUEST message
Establishment Cause
Not checked.
Random Reference
Not checked.
Contents of CIPHERING MODE COMMAND message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00110101
Cipher Mode Setting
- algorithm identifier
cipher with A5/1.
- SC
Start ciphering.
Cipher Response
IMEI shall not be included.
Contents of CIPHERING MODE COMPLETE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00110010
Mobile Identity
Not present.
Contents of the CLASSMARK CHANGE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
000100110
Mobile Station Classmark 2
See PIXIT.
Mobile Station Classmark 3
For presence and contents see PIXIT.
Contents of CM SERVICE ACCEPT message:
Protocol Discriminator
Mobility Management.
Skip Indicator
0000
Message Type
00100001
Contents of CM SERVICE REQUEST message
Protocol Discriminator
Mobility Management.
Skip Indicator
0000
Message Type
0X100100
Other information elements
Not checked.
Contents of CONNECT message (SS to MS)
Protocol Discriminator
Call Control.
Transaction Identifier
TI value
As used in the SETUP message.
TI flag
1
Message Type
00000111
All other information elements
Not present.
Contents of CONNECT ACKNOWLEDGE message (MS to SS)
Protocol Discriminator
Call Control.
Transaction Identifier
TI value
As used in the SETUP message.
TI flag
0
Message Type
0X001111
Contents of HANDOVER ACCESS message:
Handover Reference
Equal to the value included in the Handover Command message.
Contents of HANDOVER COMMAND message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101011
Cell Description
- Network Colour Code
1
- Base station Colour Code
Corresponding to target cell
- BCCH Carrier Number
Set to the BCCH carrier number of cell B. (one of 137, 147, 207, 217, 227, 237 or 247).
Channel Description
- Channel Type and TDMA offset
Bm + ACCHs.
- Timeslot Number
Chosen arbitrarily by the test house.
- Training Sequence Code
Chosen arbitrarily by the test house.
- Hopping
Single RF channel.
- ARFCN
Chosen arbitrarily by the test house from those supported on the target cell.
Handover Reference
- Handover Reference Value
Chosen arbitrarily by the test house.
Power Command
- ATC
0 (Sending of Handover Access is mandatory)
- EPC mode (for R5 and after MS only)
0 (Channel not in EPC mode)
- FPC (for R99 and R4 MS only)
0 (FPC not in use)
- FPC_EPC mode (for R5 and after MS only)
0 (FPC or EPC not in use)
- Power level
Chosen arbitrarily by the test house.
All other information elements
Not present.
Contents of HANDOVER COMPLETE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101100
RR cause
Normal event.
Time difference
Not present.
Contents of HANDOVER FAILURE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101000
RR cause
Dependent on the test.
IDENTITY REQUEST
Information element
Value/remark
Identity type
IMEI
Spare half octet
0000
IDENTITY RESPONSE
Information element
Value/remark
Mobile identity
not checked
Contents of IMMEDIATE ASSIGNMENT message:
L2 pseudo length
This is the sum of the lengths of all the information elements present in the message except for the IA rest octets and L2 pseudo length IEs. For the default message the L2 pseudo length is 11.
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00111111
Page Mode
- Page Mode
Normal Paging.
Channel Description
- Channel Type and TDMA offset
For non-combined CCCH/SDCCH (see initial conditions), SDCCH/8, with subchannel chosen arbitrarily by the test house For combined CCCH/SDCCH (default SS conditions), SDCCH/4, with subchannel chosen arbitrarily by the test house.
- Timeslot Number
For non-combined CCCH/SDCCH (see initial conditions), chosen arbitrarily by the test house; For combined CCCH/SDCCH (default SS conditions), SDCCH/4, timeslot zero.
- Training Sequence Code
For non-combined CCCH/SDCCH (see initial conditions), chosen arbitrarily by the test house; For combined CCCH/SDCCH (default SS
conditions), SDCCH/4, TSC=5 (same as the BCC).
- Hopping
Single RF channel.
- ARFCN
For non-combined CCCH/SDCCH (see initial conditions), Channel number 157; For combined CCCH/SDCCH (default SS conditions), SDCCH/4, Channel number 147.
Request Reference
Pertaining to last Channel Request sent by the MS.
Timing Advance
- Timing advance value
30 bit periods.
Mobile Allocation
- Length
0
Starting Time
Not present.
IA rest octets
Not used (all bits set to spare).
Contents of IMMEDIATE ASSIGNMENT EXTENDED message:
L2 pseudo length
This is the sum of the lengths of all the information elements present in the message except for the IAX rest octets and L2 pseudo length IEs. For the default message the L2 pseudo length is 18.
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00111001
Page Mode
- Page Mode
Normal Paging.
Channel Description 1
- Channel Type and TDMA offset
For non-combined CCCH/SDCCH (see test conditions), SDCCH/8, with subchannel chosen arbitrarily by the test house; For combined CCCH/SDCCH (default SS conditions), SDCCH/4, with subchannel chosen arbitrarily by the test house.
- Timeslot Number
For non-combined CCCH/SDCCH (see test conditions), chosen arbitrarily by the test house; For combined CCCH/SDCCH (default SS conditions), SDCCH/4, timeslot zero.
- Training Sequence Code
For non-combined CCCH/SDCCH (see initial conditions), chosen arbitrarily by the test house; For combined CCCH/SDCCH (default SS
conditions), SDCCH/4, TSC=5 (same as the BCC).
- Hopping
Single RF channel.
- ARFCN
For non-combined CCCH/SDCCH (see initial conditions),Channel number 157; For combined CCCH/SDCCH (default SS conditions), SDCCH/4, Channel number 147.
Request Reference 1
Pertaining to last Channel Request sent by the MS.
Timing Advance 1
- Timing advance value
Chosen arbitrarily by the test house.
Channel Description 2
- Channel Type and TDMA offset
Same channel type as in Channel Description 1, but different TDMA offset to that in Channel Description 1.
- Timeslot Number
equal to the value in Channel Description 1.
- Training Sequence Code
equal to the value in Channel Description 1.
- Hopping
Single RF channel.
- ARFCN
equal to the value in Channel Description 1.
Request Reference 2
Not pertaining to any Channel Requests sent by the MS.
Timing Advance 2
- Timing advance value
Chosen arbitrarily by the test house.
Mobile Allocation
- Length
0
Starting Time
Not present.
IAX rest octets
Not used (all bits set to spare).
Contents of IMMEDIATE ASSIGNMENT REJECT message:
L2 pseudo length
19
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00111010
Page Mode
- Page Mode
Normal Paging.
Request Reference
Pertaining to last Channel Request sent by the MS.
Wait Indication
0 s.
Request Reference
Not pertaining to the MS under test.
Wait Indication
0 s.
Request Reference
Not pertaining to the MS under test.
Wait Indication
0 s.
Request Reference
Not pertaining to the MS under test.
Wait Indication
0 s.
IAR rest octets
Not used (all bits set to spare).
Contents of LOCATION UPDATING REQUEST message:
Protocol Discriminator
MM message.
Skip Indicator
0000
Message Type
0X001000
Other information elements
Not checked.
Contents of PAGING REQUEST TYPE 1 message:
L2 pseudo length
This is the sum of the lengths of all the information elements present in the message except for the P1 rest octets and L2 pseudo length IEs. For the default message the L2 pseudo length is 9.
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00100001
Page Mode
- Page Mode
Normal Paging.
Channels needed
- first channel
any channel.
- second channel
any channel.
Mobile Identity 1
- odd/even indication
Even.
- Type of Identity
TMSI.
- Identity Digits
TMSI previously allocated to MS.
Mobile Identity 2
Not present.
P1 rest octets
Not used (all bits set to spare).
Contents of PAGING REQUEST TYPE 2 message:
L2 pseudo length
This is the sum of the lengths of all the information elements present in the message except for the P2 rest octets and L2 pseudo length IEs. For the default message the L2 pseudo length is 11.
Protocol Discriminator
RR Management..
Skip Indicator
0000
Message Type
00100010
Page Mode
- Page Mode
Normal Paging.
Channels needed
- first channel
any channel.
- second channel
any channel.
Mobile Identity 1
- TMSI value
TMSI previously allocated to MS.
Mobile Identity 2
- TMSI value
TMSI not allocated to MS.
Mobile Identity
Not present.
P2 rest octets
Not used (all bits set to spare).
Contents of PAGING REQUEST TYPE 3 message:
L2 pseudo length
19
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00100100
Page Mode
- Page Mode
Normal Paging.
Channels needed
- first channel
any channel.
- second channel
any channel.
Mobile identity 1
- TMSI value
TMSI previously allocated to MS.
Mobile identity 2
- TMSI value
TMSI not allocated to MS.
Mobile identity 3
- TMSI value
TMSI not allocated to MS.
Mobile identity 4
- TMSI value
TMSI not allocated to MS.
P3 rest octets
Not used (all bits set to spare).
Contents of PAGING RESPONSE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00100111
Ciphering Key Sequence Number
- Key Sequence
Key sequence number previously allocated to MS, or "111" if no key is available.
Mobile Station Classmark 2
Mobile Identity
- odd/even indication
Even
- Type of identity
TMSI
- Identity Digits
TMSI previously allocated to MS.
Contents of PHYSICAL INFORMATION message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101101
Timing advance
20 bit periods.
Contents of SETUP message; (MS to SS):
Protocol Discriminator
Call Control.
Transaction Identifier
TI value
any value from the set {0, ..., 6}.
TI flag
0
Message Type
0X000101
Other information elements
Not checked.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.21 Default contents of GSM 710 layer 3 messages for RR tests
|
This subclause contains the default values of GSM 710 L3 messages, which unless indicated otherwise in subclause 26.6 shall be transmitted by the system simulator and which are required to be received from the GSM 710 MS under test. These values are used in order to be consistent with the phase 2 version of 26.6.
The necessary L3 messages are listed in alphabetic order, with the exception of the SYSTEM INFORMATION messages, where it is the information elements which are listed in alphabetic order (this is because some information elements occur in several SYSTEM INFORMATION types).
In this subclause, decimal values are normally used. However, sometimes a hexadecimal value, indicated by an "H", or a binary value, indicated by a "B" is used.
Default SYSTEM INFORMATION:
NOTE 1: SYSTEM INFORMATION 2 bis, SYSTEM INFORMATION 5 bis, SYSTEM INFORMATION 7, and SYSTEM INFORMATION 8 messages are not used.
Cell A
Contents of information elements in SYSTEM INFORMATION TYPE 1 to 6 messages for cell A.
(CBCH) Channel Description
Not present.
(CBCH) Mobile Allocation
Not present.
Cell Channel Description
- Format identifier
128 range.
- Cell Allocation ARFCN
Channel Numbers 457, 467, 470 and 475.
Cell Identity
- Cell Identity Value
0001H
Cell Options
- Power Control Indicator
Power Control Indicator is not set.
- DTX Indicator
MS shall not use DTX.
- Radio_Link_Timeout
8 SACCH blocks.
Cell Selection Parameters
- Cell_Reselect_Hysteresis
12 dB.
- MX_TXPWR_MAX_CCH
Minimum level.
- ACS
No addition cell parameters are present in SYSTEM INFORMATION messages 7 and 8.
- NECI
New establishment causes not supported.
- RXLEV_ACCESS_MIN
Minimum level.
Control Channel Description
- Attach-Detach allowed
No Attach/Detach.
- BS_AG_BLKS_RES
0 blocks reserved for access grant.
- CCCH_CONF
1 basic physical channel used for CCCH, combined with SDCCHs.
- BS_PA_MFRMS
5 multiframe periods for transmission of paging messages.
- T3212 Time-out value
Infinite.
L2 pseudo length
- System information 1
21
- System information 2
22
- System information 3
18
- System information 4
12
Location Area Identification
- Mobile Country Code
001 decimal
- Mobile Network Code
01 decimal
- Location Area Code
0001H
Message Type
- System information 1
00011001
- System information 2
00011010
- System information 3
00011011
- System information 4
00011100
- System information 5
00011101
- System information 6
00011110
Neighbour Cells Description
- Format identifier
Range 128.
- BCCH Allocation Sequence
0
- BCCH Allocation ARFCN
Channels numbers 447, 457, 477, 480, 499, 504, 507 and 510.
- EXT-IND
This IE carries the complete BA.
NCC Permitted
0000 0010
RACH Control Parameters
- Max Retrans
Max 1 retrans.
- Tx-integer
5 slots used.
- Cell Barred for Access
Cell is not barred.
- Call Reestablishment Allowed
Not allowed.
- Access Control Class
Access is not barred.
- Emergency Call allowed
Yes.
SI 1 rest octets
Not used (all bits are set to spare).
SI 2 rest octets
Not used (all bits are set to spare).
SI 3 rest octets
Not used (all bits are set to spare).
SI 4 rest octets
Not used (all bits are set to spare).
Default settings for cell A:
Downlink input level
63 dBmicroVolt emf.
Uplink output power
Minimum supported by the MS's power class.
Propagation profile
static.
BCCH/CCCH carrier number
457
Cell B
The contents of SYSTEM INFORMATION TYPE 1 to 6 messages for cell B are identical to those of cell A with the following exceptions:
Cell Channel Description
- Format Identifier
128 range.
- Cell Allocation ARFCN
Channel Number 447.
NOTE 2: This IE needs modification when used in handover tests which command the MS to go to a frequency hopping channel in cell B.
Cell Identity
- Cell Identity Value 0002H
Default settings for cell B:
Downlink input level
53 dBmicroVolt emf.
Uplink output power
minimum supported by the MS's power class.
Propagation profile
static.
BCCH/CCCH carrier number
447
Contents of ALERTING message (SS to MS):
Protocol Discriminator
Call Control.
Transaction Identifier
TI value
As used in the SETUP message.
TI flag
1 (destination side).
Message Type
00000001
All other information elements
Not present.
Contents of ASSIGNMENT COMMAND message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101110
Channel Description
- Channel Type and TDMA offset
Bm + ACCHs
- Timeslot Number
Chosen arbitrarily by the test house.
- Training Sequence Code
Chosen arbitrarily by the test house.
- Hopping
Single RF channel.
- ARFCN
Channel number 467.
Power Command
- EPC mode (for R5 and after MS only)
0 (Channel not in EPC mode)
- FPC (for R99 and R4 MS only)
0 (FPC not in use)
- FPC_EPC mode (for R5 and after MS only)
0 (FPC or EPC not in use)
- Power level
Chosen arbitrarily by the test house.
All other information elements
Not present.
Contents of ASSIGNMENT COMPLETE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101001
RR Cause
- RR Cause Value
Normal event.
Contents of ASSIGNMENT FAILURE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101111
RR Cause
- RR Cause Value
Depending on test.
Contents of AUTHENTICATION REQUEST message:
Protocol Discriminator
MM message.
Skip Indicator
0000
Message Type
00010010
Ciphering Key Sequence Number
- Key Sequence
Chosen arbitrarily by the test house from the range 0 to 6.
Authentication Parameter RAND
- RAND value
Chosen arbitrarily by the test house.
Contents of AUTHENTICATION RESPONSE message:
Protocol Discriminator
MM message.
Skip Indicator
0000
Message Type
0X010100
Other information element(s)
Not checked.
Contents of CALL PROCEEDING message:
Protocol Discriminator
Call Control.
Transaction Identifier
TI value
As used in the SETUP message.
TI flag
1 (destination side).
Message Type
00000010
All other information elements
Not present.
Contents of CHANNEL MODE MODIFY message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00010000
Channel Description
- Channel Type and TDMA offset
Depending on test.
- Timeslot Number
Chosen arbitrarily by the test house.
- Training Sequence Code
Chosen arbitrarily by the test house.
- Hopping
Single RF channel.
- ARFCN
Channel number 467.
Channel Mode
- Mode
Depending on test.
Contents of CHANNEL MODE MODIFY ACKNOWLEDGE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00010111
Channel Description
- Channel Type and TDMA offset
Depending on test.
- Timeslot Number
Same as in the CHANNEL MODE MODIFY message.
- Training Sequence Code
Same as in the CHANNEL MODE MODIFY message.
- Hopping
Single RF channel.
- Frequency Band
Band number 0.
- ARFCN
Channel number 467.
Channel Mode
- Mode
Same as in the CHANNEL MODE MODIFY message.
Contents of CHANNEL RELEASE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00001101
RR Cause
- RR Cause Value
Normal event.
Contents of CHANNEL REQUEST message
Establishment Cause
Not checked.
Random Reference
Not checked.
Contents of CIPHERING MODE COMMAND message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00110101
Cipher Mode Setting
- algorithm identifier
cipher with A5/1.
- SC
Start ciphering.
Cipher Response
IMEI shall not be included.
Contents of CIPHERING MODE COMPLETE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00110010
Mobile Identity
Not present.
Contents of the CLASSMARK CHANGE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
000100110
Mobile Station Classmark 2
See PIXIT.
Mobile Station Classmark 3
For presence and contents see PIXIT.
Contents of CM SERVICE ACCEPT message:
Protocol Discriminator
Mobility Management.
Skip Indicator
0000
Message Type
00100001
Contents of CM SERVICE REQUEST message
Protocol Discriminator
Mobility Management.
Skip Indicator
0000
Message Type
0X100100
Other information elements
Not checked.
Contents of CONNECT message (SS to MS)
Protocol Discriminator
Call Control.
Transaction Identifier
TI value
As used in the SETUP message.
TI flag
1
Message Type
00000111
All other information elements
Not present.
Contents of CONNECT ACKNOWLEDGE message (MS to SS)
Protocol Discriminator
Call Control.
Transaction Identifier
TI value
As used in the SETUP message.
TI flag
0
Message Type
0X001111
Contents of HANDOVER ACCESS message:
Handover Reference
Equal to the value included in the Handover Command message.
Contents of HANDOVER COMMAND message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101011
Cell Description
- Network Colour Code
1
- Base station Colour Code
Corresponding to target cell
- BCCH Carrier Number
Set to the BCCH carrier number of cell B. (one of 447, 457, 480, 499, 504, 507 or 510).
Channel Description
- Channel Type and TDMA offset
Bm + ACCHs.
- Timeslot Number
Chosen arbitrarily by the test house.
- Training Sequence Code
Chosen arbitrarily by the test house.
- Hopping
Single RF channel.
- ARFCN
Chosen arbitrarily by the test house from those supported on the target cell.
Handover Reference
- Handover Reference Value
Chosen arbitrarily by the test house.
Power Command
- ATC
0 (Sending of Handover Access is mandatory)
- EPC mode (for R5 and after MS only)
0 (Channel not in EPC mode)
- FPC (for R99 and R4 MS only)
0 (FPC not in use)
- FPC_EPC mode (for R5 and after MS only)
0 (FPC or EPC not in use)
- Power level
Chosen arbitrarily by the test house.
All other information elements
Not present.
Contents of HANDOVER COMPLETE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101100
RR cause
Normal event.
Time difference
Not present.
Contents of HANDOVER FAILURE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101000
RR cause
Dependent on the test.
IDENTITY REQUEST
Information element
Value/remark
Identity type
IMEI
Spare half octet
0000
IDENTITY RESPONSE
Information element
Value/remark
Mobile identity
not checked
Contents of IMMEDIATE ASSIGNMENT message:
L2 pseudo length
This is the sum of the lengths of all the information elements present in the message except for the IA rest octets and L2 pseudo length IEs. For the default message the L2 pseudo length is 11.
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00111111
Page Mode
- Page Mode
Normal Paging.
Channel Description
- Channel Type and TDMA offset
For non-combined CCCH/SDCCH (see initial conditions), SDCCH/8, with subchannel chosen arbitrarily by the test house For combined CCCH/SDCCH (default SS conditions), SDCCH/4, with subchannel chosen arbitrarily by the test house.
- Timeslot Number
For non-combined CCCH/SDCCH (see initial conditions), chosen arbitrarily by the test house; For combined CCCH/SDCCH (default SS conditions), SDCCH/4, timeslot zero.
- Training Sequence Code
For non-combined CCCH/SDCCH (see initial conditions), chosen arbitrarily by the test house; For combined CCCH/SDCCH (default SS
conditions), SDCCH/4, TSC=5 (same as the BCC).
- Hopping
Single RF channel.
- ARFCN
For non-combined CCCH/SDCCH (see initial conditions), Channel number 467; For combined CCCH/SDCCH (default SS conditions), SDCCH/4, Channel number 457.
Request Reference
Pertaining to last Channel Request sent by the MS.
Timing Advance
- Timing advance value
30 bit periods.
Mobile Allocation
- Length
0
Starting Time
Not present.
IA rest octets
Not used (all bits set to spare).
Contents of IMMEDIATE ASSIGNMENT EXTENDED message:
L2 pseudo length
This is the sum of the lengths of all the information elements present in the message except for the IAX rest octets and L2 pseudo length IEs. For the default message the L2 pseudo length is 18.
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00111001
Page Mode
- Page Mode
Normal Paging.
Channel Description 1
- Channel Type and TDMA offset
For non-combined CCCH/SDCCH (see test conditions), SDCCH/8, with subchannel chosen arbitrarily by the test house; For combined CCCH/SDCCH (default SS conditions), SDCCH/4, with subchannel chosen arbitrarily by the test house.
- Timeslot Number
For non-combined CCCH/SDCCH (see test conditions), chosen arbitrarily by the test house; For combined CCCH/SDCCH (default SS conditions), SDCCH/4, timeslot zero.
- Training Sequence Code
For non-combined CCCH/SDCCH (see initial conditions), chosen arbitrarily by the test house; For combined CCCH/SDCCH (default SS
conditions), SDCCH/4, TSC=5 (same as the BCC).
- Hopping
Single RF channel.
- ARFCN
For non-combined CCCH/SDCCH (see initial conditions),Channel number 467; For combined CCCH/SDCCH (default SS conditions), SDCCH/4, Channel number 457.
Request Reference 1
Pertaining to last Channel Request sent by the MS.
Timing Advance 1
- Timing advance value
Chosen arbitrarily by the test house.
Channel Description 2
- Channel Type and TDMA offset
Same channel type as in Channel Description 1, but different TDMA offset to that in Channel Description 1.
- Timeslot Number
equal to the value in Channel Description 1.
- Training Sequence Code
equal to the value in Channel Description 1.
- Hopping
Single RF channel.
- ARFCN
equal to the value in Channel Description 1.
Request Reference 2
Not pertaining to any Channel Requests sent by the MS.
Timing Advance 2
- Timing advance value
Chosen arbitrarily by the test house.
Mobile Allocation
- Length
0
Starting Time
Not present.
IAX rest octets
Not used (all bits set to spare).
Contents of IMMEDIATE ASSIGNMENT REJECT message:
L2 pseudo length
19
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00111010
Page Mode
- Page Mode
Normal Paging.
Request Reference
Pertaining to last Channel Request sent by the MS.
Wait Indication
0 s.
Request Reference
Not pertaining to the MS under test.
Wait Indication
0 s.
Request Reference
Not pertaining to the MS under test.
Wait Indication
0 s.
Request Reference
Not pertaining to the MS under test.
Wait Indication
0 s.
IAR rest octets
Not used (all bits set to spare).
Contents of LOCATION UPDATING REQUEST message:
Protocol Discriminator
MM message.
Skip Indicator
0000
Message Type
0X001000
Other information elements
Not checked.
Contents of PAGING REQUEST TYPE 1 message:
L2 pseudo length
This is the sum of the lengths of all the information elements present in the message except for the P1 rest octets and L2 pseudo length IEs. For the default message the L2 pseudo length is 9.
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00100001
Page Mode
- Page Mode
Normal Paging.
Channels needed
- first channel
any channel.
- second channel
any channel.
Mobile Identity 1
- odd/even indication
Even.
- Type of Identity
TMSI.
- Identity Digits
TMSI previously allocated to MS.
Mobile Identity 2
Not present.
P1 rest octets
Not used (all bits set to spare).
Contents of PAGING REQUEST TYPE 2 message:
L2 pseudo length
This is the sum of the lengths of all the information elements present in the message except for the P2 rest octets and L2 pseudo length IEs. For the default message the L2 pseudo length is 11.
Protocol Discriminator
RR Management..
Skip Indicator
0000
Message Type
00100010
Page Mode
- Page Mode
Normal Paging.
Channels needed
- first channel
any channel.
- second channel
any channel.
Mobile Identity 1
- TMSI value
TMSI previously allocated to MS.
Mobile Identity 2
- TMSI value
TMSI not allocated to MS.
Mobile Identity
Not present.
P2 rest octets
Not used (all bits set to spare).
Contents of PAGING REQUEST TYPE 3 message:
L2 pseudo length
19
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00100100
Page Mode
- Page Mode
Normal Paging.
Channels needed
- first channel
any channel.
- second channel
any channel.
Mobile identity 1
- TMSI value
TMSI previously allocated to MS.
Mobile identity 2
- TMSI value
TMSI not allocated to MS.
Mobile identity 3
- TMSI value
TMSI not allocated to MS.
Mobile identity 4
- TMSI value
TMSI not allocated to MS.
P3 rest octets
Not used (all bits set to spare).
Contents of PAGING RESPONSE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00100111
Ciphering Key Sequence Number
- Key Sequence
Key sequence number previously allocated to MS, or "111" if no key is available.
Mobile Station Classmark 2
Mobile Identity
- odd/even indication
Even
- Type of identity
TMSI
- Identity Digits
TMSI previously allocated to MS.
Contents of PHYSICAL INFORMATION message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101101
Timing advance
20 bit periods.
Contents of SETUP message; (MS to SS):
Protocol Discriminator
Call Control.
Transaction Identifier
TI value
any value from the set {0, ..., 6}.
TI flag
0
Message Type
0X000101
Other information elements
Not checked.
26.6.22 Default contents of T-GSM 810 layer 3 messages for RR tests
This subclause contains the default values of T-GSM 810 L3 messages, which unless indicated otherwise in subclause 26.6 shall be transmitted by the system simulator and which are required to be received from the T-GSM 810 MS under test. These values are used in order to be consistent with the phase 2 version of 26.6.
The necessary L3 messages are listed in alphabetic order, with the exception of the SYSTEM INFORMATION messages, where it is the information elements which are listed in alphabetic order (this is because some information elements occur in several SYSTEM INFORMATION types).
In this subclause, decimal values are normally used. However, sometimes a hexadecimal value, indicated by an "H", or a binary value, indicated by a "B" is used.
Default SYSTEM INFORMATION:
NOTE 1: SYSTEM INFORMATION 2 bis, SYSTEM INFORMATION 5 bis, SYSTEM INFORMATION 7, and SYSTEM INFORMATION 8 messages are not used.
Cell A
Contents of information elements in SYSTEM INFORMATION TYPE 1 to 6 messages for cell A.
(CBCH) Channel Description
Not present.
(CBCH) Mobile Allocation
Not present.
Cell Channel Description
- Format identifier
128 range.
- Cell Allocation ARFCN
Channel Numbers 457, 467, 470 and 475.
Cell Identity
- Cell Identity Value
0001H
Cell Options
- Power Control Indicator
Power Control Indicator is not set.
- DTX Indicator
MS shall not use DTX.
- Radio_Link_Timeout
8 SACCH blocks.
Cell Selection Parameters
- Cell_Reselect_Hysteresis
12 dB.
- MX_TXPWR_MAX_CCH
Minimum level.
- ACS
No addition cell parameters are present in SYSTEM INFORMATION messages 7 and 8.
- NECI
New establishment causes not supported.
- RXLEV_ACCESS_MIN
Minimum level.
Control Channel Description
- Attach-Detach allowed
No Attach/Detach.
- BS_AG_BLKS_RES
0 blocks reserved for access grant.
- CCCH_CONF
1 basic physical channel used for CCCH, combined with SDCCHs.
- BS_PA_MFRMS
5 multiframe periods for transmission of paging messages.
- T3212 Time-out value
Infinite.
L2 pseudo length
- System information 1
21
- System information 2
22
- System information 3
18
- System information 4
12
Location Area Identification
- Mobile Country Code
001 decimal
- Mobile Network Code
01 decimal
- Location Area Code
0001H
Message Type
- System information 1
00011001
- System information 2
00011010
- System information 3
00011011
- System information 4
00011100
- System information 5
00011101
- System information 6
00011110
Neighbour Cells Description
- Format identifier
Range 128.
- BCCH Allocation Sequence
0
- BCCH Allocation ARFCN
Channels numbers 447, 457, 477, 480, 499, 504, 507 and 510.
- EXT-IND
This IE carries the complete BA.
NCC Permitted
0000 0010
RACH Control Parameters
- Max Retrans
Max 1 retrans.
- Tx-integer
5 slots used.
- Cell Barred for Access
Cell is not barred.
- Call Reestablishment Allowed
Not allowed.
- Access Control Class
Access is not barred.
- Emergency Call allowed
Yes.
SI 1 rest octets
Not used (all bits are set to spare).
SI 2 rest octets
Not used (all bits are set to spare).
SI 3 rest octets
Not used (all bits are set to spare).
SI 4 rest octets
Not used (all bits are set to spare).
Default settings for cell A:
Downlink input level
63 dBmicroVolt emf.
Uplink output power
Minimum supported by the MS's power class.
Propagation profile
static.
BCCH/CCCH carrier number
457
Cell B
The contents of SYSTEM INFORMATION TYPE 1 to 6 messages for cell B are identical to those of cell A with the following exceptions:
Cell Channel Description
- Format Identifier
128 range.
- Cell Allocation ARFCN
Channel Number 447.
NOTE 2: This IE needs modification when used in handover tests which command the MS to go to a frequency hopping channel in cell B.
Cell Identity
- Cell Identity Value 0002H
Default settings for cell B:
Downlink input level
53 dBmicroVolt emf.
Uplink output power
minimum supported by the MS's power class.
Propagation profile
static.
BCCH/CCCH carrier number
447
Contents of ALERTING message (SS to MS):
Protocol Discriminator
Call Control.
Transaction Identifier
TI value
As used in the SETUP message.
TI flag
1 (destination side).
Message Type
00000001
All other information elements
Not present.
Contents of ASSIGNMENT COMMAND message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101110
Channel Description
- Channel Type and TDMA offset
Bm + ACCHs
- Timeslot Number
Chosen arbitrarily by the test house.
- Training Sequence Code
Chosen arbitrarily by the test house.
- Hopping
Single RF channel.
- ARFCN
Channel number 467.
Power Command
- EPC mode (for R5 and after MS only)
0 (Channel not in EPC mode)
- FPC (for R99 and R4 MS only)
0 (FPC not in use)
- FPC_EPC mode (for R5 and after MS only)
0 (FPC or EPC not in use)
- Power level
Chosen arbitrarily by the test house.
All other information elements
Not present.
Contents of ASSIGNMENT COMPLETE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101001
RR Cause
- RR Cause Value
Normal event.
Contents of ASSIGNMENT FAILURE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101111
RR Cause
- RR Cause Value
Depending on test.
Contents of AUTHENTICATION REQUEST message:
Protocol Discriminator
MM message.
Skip Indicator
0000
Message Type
00010010
Ciphering Key Sequence Number
- Key Sequence
Chosen arbitrarily by the test house from the range 0 to 6.
Authentication Parameter RAND
- RAND value
Chosen arbitrarily by the test house.
Contents of AUTHENTICATION RESPONSE message:
Protocol Discriminator
MM message.
Skip Indicator
0000
Message Type
0X010100
Other information element(s)
Not checked.
Contents of CALL PROCEEDING message:
Protocol Discriminator
Call Control.
Transaction Identifier
TI value
As used in the SETUP message.
TI flag
1 (destination side).
Message Type
00000010
All other information elements
Not present.
Contents of CHANNEL MODE MODIFY message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00010000
Channel Description
- Channel Type and TDMA offset
Depending on test.
- Timeslot Number
Chosen arbitrarily by the test house.
- Training Sequence Code
Chosen arbitrarily by the test house.
- Hopping
Single RF channel.
- ARFCN
Channel number 467.
Channel Mode
- Mode
Depending on test.
Contents of CHANNEL MODE MODIFY ACKNOWLEDGE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00010111
Channel Description
- Channel Type and TDMA offset
Depending on test.
- Timeslot Number
Same as in the CHANNEL MODE MODIFY message.
- Training Sequence Code
Same as in the CHANNEL MODE MODIFY message.
- Hopping
Single RF channel.
- Frequency Band
Band number 0.
- ARFCN
Channel number 467.
Channel Mode
- Mode
Same as in the CHANNEL MODE MODIFY message.
Contents of CHANNEL RELEASE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00001101
RR Cause
- RR Cause Value
Normal event.
Contents of CHANNEL REQUEST message
Establishment Cause
Not checked.
Random Reference
Not checked.
Contents of CIPHERING MODE COMMAND message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00110101
Cipher Mode Setting
- algorithm identifier
cipher with A5/1.
- SC
Start ciphering.
Cipher Response
IMEI shall not be included.
Contents of CIPHERING MODE COMPLETE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00110010
Mobile Identity
Not present.
Contents of the CLASSMARK CHANGE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
000100110
Mobile Station Classmark 2
See PIXIT.
Mobile Station Classmark 3
For presence and contents see PIXIT.
Contents of CM SERVICE ACCEPT message:
Protocol Discriminator
Mobility Management.
Skip Indicator
0000
Message Type
00100001
Contents of CM SERVICE REQUEST message
Protocol Discriminator
Mobility Management.
Skip Indicator
0000
Message Type
0X100100
Other information elements
Not checked.
Contents of CONNECT message (SS to MS)
Protocol Discriminator
Call Control.
Transaction Identifier
TI value
As used in the SETUP message.
TI flag
1
Message Type
00000111
All other information elements
Not present.
Contents of CONNECT ACKNOWLEDGE message (MS to SS)
Protocol Discriminator
Call Control.
Transaction Identifier
TI value
As used in the SETUP message.
TI flag
0
Message Type
0X001111
Contents of HANDOVER ACCESS message:
Handover Reference
Equal to the value included in the Handover Command message.
Contents of HANDOVER COMMAND message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101011
Cell Description
- Network Colour Code
1
- Base station Colour Code
Corresponding to target cell
- BCCH Carrier Number
Set to the BCCH carrier number of cell B. (one of 447, 457, 480, 499, 504, 507 or 510).
Channel Description
- Channel Type and TDMA offset
Bm + ACCHs.
- Timeslot Number
Chosen arbitrarily by the test house.
- Training Sequence Code
Chosen arbitrarily by the test house.
- Hopping
Single RF channel.
- ARFCN
Chosen arbitrarily by the test house from those supported on the target cell.
Handover Reference
- Handover Reference Value
Chosen arbitrarily by the test house.
Power Command
- ATC
0 (Sending of Handover Access is mandatory)
- EPC mode (for R5 and after MS only)
0 (Channel not in EPC mode)
- FPC (for R99 and R4 MS only)
0 (FPC not in use)
- FPC_EPC mode (for R5 and after MS only)
0 (FPC or EPC not in use)
- Power level
Chosen arbitrarily by the test house.
All other information elements
Not present.
Contents of HANDOVER COMPLETE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101100
RR cause
Normal event.
Time difference
Not present.
Contents of HANDOVER FAILURE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101000
RR cause
Dependent on the test.
IDENTITY REQUEST
Information element
Value/remark
Identity type
IMEI
Spare half octet
0000
IDENTITY RESPONSE
Information element
Value/remark
Mobile identity
not checked
Contents of IMMEDIATE ASSIGNMENT message:
L2 pseudo length
This is the sum of the lengths of all the information elements present in the message except for the IA rest octets and L2 pseudo length IEs. For the default message the L2 pseudo length is 11.
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00111111
Page Mode
- Page Mode
Normal Paging.
Channel Description
- Channel Type and TDMA offset
For non-combined CCCH/SDCCH (see initial conditions), SDCCH/8, with subchannel chosen arbitrarily by the test house For combined CCCH/SDCCH (default SS conditions), SDCCH/4, with subchannel chosen arbitrarily by the test house.
- Timeslot Number
For non-combined CCCH/SDCCH (see initial conditions), chosen arbitrarily by the test house; For combined CCCH/SDCCH (default SS conditions), SDCCH/4, timeslot zero.
- Training Sequence Code
For non-combined CCCH/SDCCH (see initial conditions), chosen arbitrarily by the test house; For combined CCCH/SDCCH (default SS
conditions), SDCCH/4, TSC=5 (same as the BCC).
- Hopping
Single RF channel.
- ARFCN
For non-combined CCCH/SDCCH (see initial conditions), Channel number 467; For combined CCCH/SDCCH (default SS conditions), SDCCH/4, Channel number 457.
Request Reference
Pertaining to last Channel Request sent by the MS.
Timing Advance
- Timing advance value
30 bit periods.
Mobile Allocation
- Length
0
Starting Time
Not present.
IA rest octets
Not used (all bits set to spare).
Contents of IMMEDIATE ASSIGNMENT EXTENDED message:
L2 pseudo length
This is the sum of the lengths of all the information elements present in the message except for the IAX rest octets and L2 pseudo length IEs. For the default message the L2 pseudo length is 18.
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00111001
Page Mode
- Page Mode
Normal Paging.
Channel Description 1
- Channel Type and TDMA offset
For non-combined CCCH/SDCCH (see test conditions), SDCCH/8, with subchannel chosen arbitrarily by the test house; For combined CCCH/SDCCH (default SS conditions), SDCCH/4, with subchannel chosen arbitrarily by the test house.
- Timeslot Number
For non-combined CCCH/SDCCH (see test conditions), chosen arbitrarily by the test house; For combined CCCH/SDCCH (default SS conditions), SDCCH/4, timeslot zero.
- Training Sequence Code
For non-combined CCCH/SDCCH (see initial conditions), chosen arbitrarily by the test house; For combined CCCH/SDCCH (default SS
conditions), SDCCH/4, TSC=5 (same as the BCC).
- Hopping
Single RF channel.
- ARFCN
For non-combined CCCH/SDCCH (see initial conditions),Channel number 467; For combined CCCH/SDCCH (default SS conditions), SDCCH/4, Channel number 457.
Request Reference 1
Pertaining to last Channel Request sent by the MS.
Timing Advance 1
- Timing advance value
Chosen arbitrarily by the test house.
Channel Description 2
- Channel Type and TDMA offset
Same channel type as in Channel Description 1, but different TDMA offset to that in Channel Description 1.
- Timeslot Number
equal to the value in Channel Description 1.
- Training Sequence Code
equal to the value in Channel Description 1.
- Hopping
Single RF channel.
- ARFCN
equal to the value in Channel Description 1.
Request Reference 2
Not pertaining to any Channel Requests sent by the MS.
Timing Advance 2
- Timing advance value
Chosen arbitrarily by the test house.
Mobile Allocation
- Length
0
Starting Time
Not present.
IAX rest octets
Not used (all bits set to spare).
Contents of IMMEDIATE ASSIGNMENT REJECT message:
L2 pseudo length
19
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00111010
Page Mode
- Page Mode
Normal Paging.
Request Reference
Pertaining to last Channel Request sent by the MS.
Wait Indication
0 s.
Request Reference
Not pertaining to the MS under test.
Wait Indication
0 s.
Request Reference
Not pertaining to the MS under test.
Wait Indication
0 s.
Request Reference
Not pertaining to the MS under test.
Wait Indication
0 s.
IAR rest octets
Not used (all bits set to spare).
Contents of LOCATION UPDATING REQUEST message:
Protocol Discriminator
MM message.
Skip Indicator
0000
Message Type
0X001000
Other information elements
Not checked.
Contents of PAGING REQUEST TYPE 1 message:
L2 pseudo length
This is the sum of the lengths of all the information elements present in the message except for the P1 rest octets and L2 pseudo length IEs. For the default message the L2 pseudo length is 9.
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00100001
Page Mode
- Page Mode
Normal Paging.
Channels needed
- first channel
any channel.
- second channel
any channel.
Mobile Identity 1
- odd/even indication
Even.
- Type of Identity
TMSI.
- Identity Digits
TMSI previously allocated to MS.
Mobile Identity 2
Not present.
P1 rest octets
Not used (all bits set to spare).
Contents of PAGING REQUEST TYPE 2 message:
L2 pseudo length
This is the sum of the lengths of all the information elements present in the message except for the P2 rest octets and L2 pseudo length IEs. For the default message the L2 pseudo length is 11.
Protocol Discriminator
RR Management..
Skip Indicator
0000
Message Type
00100010
Page Mode
- Page Mode
Normal Paging.
Channels needed
- first channel
any channel.
- second channel
any channel.
Mobile Identity 1
- TMSI value
TMSI previously allocated to MS.
Mobile Identity 2
- TMSI value
TMSI not allocated to MS.
Mobile Identity
Not present.
P2 rest octets
Not used (all bits set to spare).
Contents of PAGING REQUEST TYPE 3 message:
L2 pseudo length
19
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00100100
Page Mode
- Page Mode
Normal Paging.
Channels needed
- first channel
any channel.
- second channel
any channel.
Mobile identity 1
- TMSI value
TMSI previously allocated to MS.
Mobile identity 2
- TMSI value
TMSI not allocated to MS.
Mobile identity 3
- TMSI value
TMSI not allocated to MS.
Mobile identity 4
- TMSI value
TMSI not allocated to MS.
P3 rest octets
Not used (all bits set to spare).
Contents of PAGING RESPONSE message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00100111
Ciphering Key Sequence Number
- Key Sequence
Key sequence number previously allocated to MS, or "111" if no key is available.
Mobile Station Classmark 2
Mobile Identity
- odd/even indication
Even
- Type of identity
TMSI
- Identity Digits
TMSI previously allocated to MS.
Contents of PHYSICAL INFORMATION message:
Protocol Discriminator
RR Management.
Skip Indicator
0000
Message Type
00101101
Timing advance
20 bit periods.
Contents of SETUP message; (MS to SS):
Protocol Discriminator
Call Control.
Transaction Identifier
TI value
any value from the set {0, ..., 6}.
TI flag
0
Message Type
0X000101
Other information elements
Not checked.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.23 Test of Repeated SACCH
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.23.1 Repeated SACCH / Downlink Repeated SACCH
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.23.1.1 Conformance requirement
|
If a downlink SACCH block is incorrectly decoded (prior to combining with any previously received SACCH block), and the next uplink SACCH block is not a repetition as per the Repeated SACCH procedure (see sub-clause 11.3), then the MS shall set the SACCH Repetition Request in the next uplink SACCH block to "Repeated SACCH required" (see 3GPP TS 44.004).
If a downlink SACCH block is correctly decoded (prior to combining with any previously received SACCH block), and the next uplink SACCH block is not a repetition as per the Repeated SACCH procedure (see sub-clause 11.3), the MS shall set the SACCH Repetition Request in the next uplink SACCH block to "Repeated SACCH not required".
References
3GPP TS 44.006 clause 11.2.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.23.1.2 Test purpose
|
To verify that when the downlink SACCH block is wrongly decoded, the MS sends an uplink SACCH block containing SACCH Repetition Request set to "Repeated SACCH required" and when the downlink SACCH block is decoded correctly, the MS sends an uplink SACCH block containing SACCH Repetition Request set to "Repeated SACCH not required"
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.23.1.3 Method of test
|
Specific PICS statements:
-
PIXIT statements:
-
Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in MM-state "idle, updated" with valid TMSI and CKSN.
Foreseen final state of the MS
U0, null.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.23.1.4 Test procedure
|
a) A MS terminated call is set up according to the generic call set up procedure.
b) For 10 secs, the SS sends error free SACCH messages.
c) SS Sends one SACCH messages with unrecoverable errors.
d) For 10 secs the SS shall continuously send error free SACCH messages.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.23.1.5 Test requirement
|
1) In step b, check that all the uplink SACCH messages have SACCH Repetition Request set to “Repeated SACCH not required”
2) After step c, check that the MS sends a SACCH message having SACCH Repetition Request set to “Repeated SACCH required”.
3) In step d, check that all the uplink SACCH messages have SACCH Repetition Request set to “Repeated SACCH not required”
Specific Message Contents
None.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.23.2 Repeated SACCH / Uplink Repeated SACCH
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.23.2.1 Conformance requirement
|
At the MS side, if an uplink SACCH block contains a SAPI 0 frame and is not already a repetition, and if the last correctly received SACCH Repetition Order was set to "Repeated SACCH required", then the MS shall repeat this SACCH block at the next SACCH block period.
References
3GPP TS 44.006 clause 11.3.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.23.2.2 Test purpose
|
To verify that the MS repeats an uplink SACCH block when the downlink SACCH blocks contains SACCH Repetition Order set to "Repeated SACCH required".
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.23.2.3 Method of test
|
Initial conditions
System Simulator:
1 cell, default parameters
Mobile Station:
The MS is in MM-state "idle, updated" with valid TMSI and CKSN.
Specific PICS statements:
-
PIXIT statements:
-
Foreseen final state of the MS
U0, null.
26.6.23.2.4 Test procedure
a) A MS terminated call is set up according to the generic call set up on cell A.
b) For the duration of test case, power levels of serving cell is changed in a steps from –50dBm to –65dBm to –80dBm and back to –50dBm, by doing one change at every 480 ms. This is made to make sure that every report is different from the previous one.
c) For 10 sec, the SS sends SACCH messages, setting SACCH Repetition Order to “Repeated SACCH Not Required”.
d) SS Sends one SACCH messages setting SACCH Repetition Order to “Repeated SACCH Required”.
e) For 10 more secs, the SS shall continuously send SACCH messages with SACCH Repetition Order set to “Repeated SACCH Not Required”.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.23.2.5 Test requirement
|
1) In step c, check that MS is not retransmitting the SACCH messages on uplink.
2) After step d, Check that the MS repeats the last message.
3) In step e, check that MS is not retransmitting the SACCH messages on uplink.
Specific Message Contents
None.
|
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.