task
stringlengths 12
101
| input
stringlengths 0
90.2k
| output
stringlengths 1
139k
| options
sequence | pageTitle
stringlengths 0
1.11k
| outputColName
stringlengths 1
3.1k
| url
stringlengths 14
585
| wdcFile
stringlengths 65
76
|
|---|---|---|---|---|---|---|---|
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5004 [Error Warning Message] There is already one four-fiber {0} provisioned on the set of nodes involved in {1}. The maximum number of four-fiber {0} rings has been reached for that node. [Description] | There is already one 4F BLSR provisioned on the set of nodes involved in the ring. The maximum number of 4F BLSR rings has been reached for that node. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] WID-5005 [Error Warning Message] A non-zero hold-off time can violate switching time standards, and should only be used for a circuit with multiple path selectors. [Description] | Refer to the warning message text. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] WID-5006 [Error Warning Message] Warning: A different secondary {0} node should only be used for DRI or open-ended path protected circuits. [Description] | You should use different secondary end point only for DRI or open-ended path protected circuits. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] WID-5007 [Error Warning Message] If you change the scope of this view, the contents of this profile editor will be lost. [Description] | Refer to the warning message text. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] WID-5008 [Error Warning Message] Please ensure that all the protection groups are in proper states after the cancellation. [Description] | Refer to the warning message text. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] WID-5009 [Error Warning Message] The circuit {0} is not upgradable. No {1} capable {2}s are available at the node {3}. [Description] | No VT capable STSs are available at the node. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5010 [Error Warning Message] The domain name already exists. [Description] | Refer to the error message text. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5011 [Error Warning Message] The domain name cannot exceed {0} characters. [Description] | You may have reached the maximum number of characters. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] WID-5012 [Error Warning Message] The software load on {0} does not support the addition of a node to a 1+1 protection group. [Description] | Refer to the warning message text. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5013 [Error Warning Message] {0} does not support the bridge and roll feature. Please select a different port. [Description] | The specified port does not support Bridge and Roll. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5014 [Error Warning Message] An automatic network layout is already in progress. Please wait for it to complete before running it again. [Description] | You must for the automatic network layout to complete before running it again. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] WID-5015 [Error Warning Message] {0} cannot be applied to {1}. [Description] | You cannot apply the admin state operation, specified by {0}, to port count, specified by {1}. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5016 [Error Warning Message] An error occurred while attempting to provision the {0}. {1} [Description] | CTC encountered an error while provisioning the card. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5017 [Error Warning Message] Provisioning could not be rolled back. The {0} might be left in an INCOMPLETE state and should be manually removed. [Description] | You may have to remove the BLSR manually as it was left incomplete. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5018 [Error Warning Message] {0} is a(n) {1} node and cannot be added to a(n) {2} network. [Description] | You cannot add the node {0} of type {1} to the host node of type {2}. This prevents you from hosting both SONET and SDH nodes in the same session. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5019 [Error Warning Message] The manual path trace mode for this equipment does not support an expected string consisting of all null characters. Please change the expected string or the path trace mode. [Description] | The path trace mode does not support strings that consist of null characters. You must either change the expected string or the path trace mode. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5020 [Error Warning Message] Software activation is in progress. Provisioning is not allowed. [Description] | Refer to the warning message text. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5021 [Error Warning Message] Software activation is in progress. {0} is not allowed. [Description] | Refer to the error message text. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] WID-5022 [Error Warning Message] Warning: Ethergroup circuits are stateless (that is, always in service). The current state selection of {0} will be ignored. [Description] | Refer to the warning message text. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5023 [Error Warning Message] CTC cannot communicate with the node. The operation failed. [Description] | CTC encountered a network communication error. Connectivity between CTC and the NE was disrupted, either transiently or permanently. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5024 [Error Warning Message] The overhead circuit will not be upgraded. [Description] | Refer to the error message text. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] WID-5025 [Error Warning Message] The path targeted for this switch request is already active. The switch request can be applied, but traffic will not switch at this time. [Description] | Refer to the warning message text. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5026 [Error Warning Message] An ONS 15600 cannot serve as the primary or secondary node in a four-fiber {0} circuit. Please change your ring and/or node selections so that an ONS 15600 is not chosen as the primary or secondary node in this four-fiber {1} circuit. [Description] | Refer to the error message text. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] WID-5027 [Error Warning Message] The {0} Edit dialog box for the ring {1} has been closed due to significant provisioning changes. These changes might only be transitory, so you can reopen the {0} Edit dialog box to view the updated state. [Description] | Re-open the BLSR/MS-SPRing edit window to view the updated state of the ring. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] WID-5028 [Error Warning Message] Warning: This operation should only be used to clean up rolls that are stuck. It might also affect completeness of the circuit. Is it OK to continue with the deletion? [Description] | Refer to the warning message text. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5029 [Error Warning Message] A software downgrade cannot be performed to the selected version while an SSXC card is inserted in this shelf. Please follow the steps to replace the SSXC with a CXC card before continuing the software downgrade. [Description] | Refer to the error message text. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5030 [Error Warning Message] A software downgrade cannot be performed at the present time. [Description] | Try the software downgrade later. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] WID-5031 [Error Warning Message] Canceling a software upgrade during a standby TSC clock acquisition might result in a traffic outage. [Description] | Refer to the warning message text. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5032 [Error Warning Message] An error occurred while accepting the load. [Description] | Refer to the error message text. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5033 [Error Warning Message] The profile could not be loaded. An error occurred while decoding the characters. [Description] | CTC detected an error while decoding characters and could not load the profile. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5034 [Error Warning Message] The profile could not be loaded. An error occurred while trying to recognize the file format. [Description] | CTC detected an error and could not load the profile. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5035 [Error Warning Message] The profile could not be loaded. An error occurred while reading the file. [Description] | CTC could not read the file and is therefore unable to load the profile. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5036 [Error Warning Message] The GNE hostname {0} is invalid. [Description] | The specified host name is invalid. CTC could not resolve the host name to any valid IP address | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5037 [Error Warning Message] Provisionable patchcords cannot be created between transponder trunk ports and multiplexer/demultiplexer ports on the same node. [Description] | You must create provisionable patchcords between transponder trunk ports and mux/demux ports that are on different nodes. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5038 [Error Warning Message] Provisionable patchcords created between transponder trunk ports and multiplexer/demultiplexer ports must use the same wavelength: {0} is not equal to {1}. [Description] | Wavelengths used by provisionable patchcords for transponder trunk ports and mux/demux ports must be the same. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5039 [Error Warning Message] Provisionable patchcords created between transponder trunk ports and multiplexer/demultiplexer ports must use the same wavelength: {0} is not equal to {1}. Please provision the {2} wavelength on {3}. [Description] | Transmitter and receiver port wavelengths are not equal. Provision the receiver and transmitter wavelengths on transmitter and receiver ports respectively. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5040 [Error Warning Message] Provisionable patchcords created between OC3/OC12 ports and multiplexer/demultiplexer ports are not supported. [Description] | Refer to the error message text. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5041 [Error Warning Message] Provisionable patchcords created between gray OC-N trunk ports and multiplexer/demultiplexer ports are not supported. [Description] | Refer to the error message text. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5042 [Error Warning Message] Provisionable patchcords created between OC-N trunk ports and multiplexer/demultiplexer ports must use the same wavelength: {0} is not equal to {1}. [Description] | Wavelengths used by provisionable patchcords for OC-N trunk ports and mux/demux ports must be the same. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] WID-5043 [Error Warning Message] Warning: Only the line card was provisioned. The wavelength compatibility check was skipped. [Description] | Refer to the warning message text. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5044 [Error Warning Message] Virtual links can be used only for OCH-Trail circuits. [Description] | Refer to the error message text. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5045 [Error Warning Message] The virtual link does not have wavelengths available. [Description] | Set wavelengths for the virtual link and proceed. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] WID-5046 [Error Warning Message] Warning: if you select "Use OCHNC Direction," your circuit will be limited to nodes prior to release 07.00. [Description] | Refer to the warning message text. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5047 [Error Warning Message] Provisionable patchcords created between OC3/OC12 ports are not supported. [Description] | Refer to the error message text. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5048 [Error Warning Message] Provisionable patchcords created between gray OC-N trunk ports are not supported. [Description] | Refer to the error message text. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5049 [Error Warning Message] Provisionable patchcords created between gray OC-N trunk ports and multiplexer/demultiplexer ports are not supported. [Description] | Refer to the error message text. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5050 [Error Warning Message] The element model could not be found. {0} [Description] | The specified Element Model cannot be located. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] WID-5051 [Error Warning Message] The port state cannot be indirectly transitioned because the port aggregates OCHCC circuits: if the port state needs to be changed, edit it directly through port provisioning. [Description] | Refer to the warning message text. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5052 [Error Warning Message] The operation is not valid for the connection type. [Description] | You may have selected the incorrect switch. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5053 [Error Warning Message] The operation cannot be performed because the connection is under test access. [Description] | Refer to the error message text. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5054 [Error Warning Message] The TL1 tunnel could not be opened. {0} [Description] | Refer to the error message text. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5055 [Error Warning Message] Some patchcords were not deleted. Patchcords cannot be deleted if they are incomplete or support any circuits, or if the nodes supporting them are not connected. [Description] | Refer to the error message text. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5056 [Error Warning Message] This PPC cannot be deleted because one or more circuits are provisioned over it. [Description] | Remove the circuits provisioned over the provisionable patchcord before trying to delete it. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5057 [Error Warning Message] The addition of the last node has not yet finished. Please wait before trying to add a new node. [Description] | Refer to the error message text. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5058 [Error Warning Message] An OCHNC upgrade is applicable only to bidirectional circuits. [Description] | Refer to the error message text. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5059 [Error Warning Message] The OCHNC upgrade failed. One or more communication failures occurred during the operation. [Description] | CTC encountered a complete failure while upgrading optical channel network connection. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5060 [Error Warning Message] The OCHNC upgrade partially failed. One or more communication failures occurred during the operation. Create the OCHCC manually. [Description] | CTC encountered a partial failure while upgrading an optical channel network connection. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5061 [Error Warning Message] The overhead circuit source and destination must reside on the same shelf. [Description] | Refer to the error message text. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5062 [Error Warning Message] A four-fiber {0} cannot be created using three cards. [Description] | A four-fiber BLSR needs four cards. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] WID-5063 [Error Warning Message] The profile "{0}" includes a change to the OPEN-SLOT alarm severity. This change is disallowed for the ONS 15600. "{1}" will continue to use the OPEN-SLOT severity of MN that is included in the default configuration. Other changes from the "{2}" profile were successfully applied to {3}". [Description] | Refer to the warning message text. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5064 [Error Warning Message] {0} {1} [Description] | This indicates the status of path protection switching. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] WID-5065 [Error Warning Message] If you apply routing constraints to more than {0} nodes, performance might be affected and the operation might require more time than expected. Select Yes if you intend to proceed in spite of this risk, or No if you prefer to review your selection. [Description] | Refer to the warning message text. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] WID-5066 [Error Warning Message] The routing constraints will be lost. Are you sure you want to reset your changes? [Description] | Refer to the warning message text. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] WID-5067 [Error Warning Message] The routing constraints will be lost. Are you sure you want to leave this panel? [Description] | Refer to the warning message text. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5068 [Error Warning Message] The routing constraints could not be applied. [Description] | Refer to the error message text. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5069 [Error Warning Message] A source node cannot be added to either of these lists. [Description] | Select a node other than the source node to add to the route. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5070 [Error Warning Message] A destination node cannot be added to either of these lists. [Description] | Select a node other than the destination node to add to the route. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5071 [Error Warning Message] This node already belongs to one of these lists. [Description] | The node is already selected either in include or exclude list in the OCH circuit. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5072 [Error Warning Message] An OCH-Trail tunnel link was found but without any associated circuit. [Description] | Create an OCH-Trail circuit associated with the link. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5073 [Error Warning Message] You are creating an unprotected link from a protected port. Do you want to continue? [Description] | Refer to the error message. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5074 [Error Warning Message] Deleting OCH DCN circuits will cause a loss of connectivity to nodes in the circuit path that do not have other DCN connections. Do you want to continue? [Description] | Refer to the error message. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5075 [Error Warning Message] The VLAN ID must be a number between 1 and 4093. [Description] | Enter a number between 1 and 4093. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5076 [Error Warning Message] An error occurred while provisioning the VLAN ID. The VLAN ID is already present in the current profile [Description] | Select a VLAN ID that is not present in the current profile. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5077 [Error Warning Message] An error occurred while provisioning the VLAN database profile. {0} [Description] | CTC could not save the VLAN profile to the file name mentioned. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5078 [Error Warning Message] The VLAN merge is not complete. You forgot to fill {0} record(s). [Description] | Fill in the number of records specified and then proceed. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5079 [Error Warning Message] An error occurred while validating the provisionable patchcord. [Description] | Refer to the error message text. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5080 [Error Warning Message] No rolls are available. [Description] | You cannot delete a roll without selecting a roll. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5081 [Error Warning Message] An error occurred while tracing the RPR ring: {0} [Description] | The circuit reference is invalid. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5082 [Error Warning Message] {0} does not support: - Low-order circuits that have both {1}-protected and {2}-protected spans and that cross a node that does not have low-order cross-connect capability. - High-order circuits that carry low-order circuits with the parameters described above. [Description] | Refer to the error message text. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5083 [Error Warning Message] This circuit is not the same size as the existing circuit {0}. This circuit has size {1} and the existing circuit has size {2}. [Description] | During an RPR circuit creation ML card, the new circuit size and the existing circuit size must be the same. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5084 [Error Warning Message] The Trunk model could not be found. {0} [Description] | The trunk specified is not found. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5085 [Error Warning Message] The maximum number of VLAN DB profiles is {0}. [Description] | Refer to the error message. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5086 [Error Warning Message] The circuit roll failed. You cannot bridge and roll the selected circuit because it has a monitor circuit. [Description] | Refer to the error message. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5087 [Error Warning Message] You cannot use same slot for east working and west protect ports. [Description] | Refer to the error message text. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5088 [Error Warning Message] You cannot use same slot for east working and west protect ports. [Description] | Refer to the error message text. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] WID-5089 [Error Warning Message] The maximum number of circuits that can be deleted at a time is 200. Do you want to delete the first 200 circuits selected? [Description] | Refer to the error message text | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5090 [Error Warning Message] This operation cannot be completed. The selected circuits have different state models; please select circuits of the same type. [Description] | Refer to the error message text | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-5091 [Error Warning Message] Some PPC terminations were not repaired. [Description] | Refer to the error message text | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] WID-5092 [Error Warning Message] The TL1 encoding mode for the tunnel is being changed. Do you want to modify the encoding? [Description] | Confirm if you really want to modify TL1 tunnel encoding. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-6000 [Error Warning Message] This platform does not support power monitoring thresholds. [Description] | Refer to the error message text. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-6001 [Error Warning Message] One of the XC cards has failures or is missing. [Description] | Check whether all the cross-connect cards are installed and working. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-6002 [Error Warning Message] One of the XC cards is locked. [Description] | Unlock the cross-connect card. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-6003 [Error Warning Message] The OSC termination could not be created. This ring ID is already assigned. [Description] | Enter a new ID for the ring. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-6004 [Error Warning Message] A system reset cannot be performed while a BLSR ring is provisioned on the node. [Description] | Remove the BLSR from the node and continue with the reset procedure. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-6005 [Error Warning Message] The timing references could not be assigned. - Only two DS1 or BITS interfaces can be specified. - DS1 interfaces cannot be retimed and used as a reference. - BITS-2 is not supported on this platform. [Description] | Refer to the error message text. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-6006 [Error Warning Message] The timing references could not be assigned. - An NE reference can only be used if the timing mode is LINE. - A BITS reference can only be used if the timing mode is not LINE. - A Line reference can only be used if the timing mode is not EXTERNAL. [Description] | Refer to the error message text. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] EID-6008 [Error Warning Message] SF BER and SD BER are not provisionable on the protect line of a protection group. [Description] | Refer to the error message text. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] WID-6009 [Error Warning Message] If autoadjust GFP buffers is disabled, GFP buffers available must be set to an appropriate value based on the distance between the circuit endpoints. [Description] | Refer to the warning message text. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] WID-6010 [Error Warning Message] If auto detection of credits is disabled, credits available must be set to a value less than or equal to the number of receive credits on the connected FC endpoint. [Description] | Refer to the warning message text. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
8ccbd405__x____Error_Messages___DocWiki__Description | [Error Warning ID] WID-6011 [Error Warning Message] Ingress idle filtering should be turned off only when required to operate with non-Cisco Fibre Channel/FICON-over-SONET equipment. [Description] | Refer to the warning message text. | [] | ONS 15454 Troubleshooting Guide R8.5.x -- Error Messages - DocWiki | Description | http://docwiki.cisco.com/wiki/ONS_15454_Troubleshooting_Guide_R8.5.x_--_Error_Messages | 6/1438042988860.4_20150728002308-00259-ip-10-236-191-2_78663849_0.json |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.