query
stringlengths
20
2.05k
answer
stringlengths
75
2.05k
It seems this is not a stand alone unit. I need to buy camera, connecting wores etc. Could you please list everything I need to buy for this to wrok?
wires come with it ,Yes, camera is extra wires included, wireless transmitter is also an extra option
It seems this is not a stand alone unit. I need to buy camera, connecting wores etc. Could you please list everything I need to buy for this to wrok?
Any camera you choose with RCA cables and power hook up wire harness which should be included should work. Rear camera is powered by the back up light and the monitor is hooked up to a fused power source controlled by the ignition switch. The signal is sent through the RCA cable when the car is put into reverse which sends power to the camera. Hardest part is placing the wiring.
I'm still unclear - does this come with 1 or 2 tires? I'm looking at the black 26x2.2, when I select it the total is $32.97. Is this for 1 or 2?!
When I purchased these tires in 2013 they were 14.99 each and the total with shipping was 36.97. I would look at the quantity once you select a seller to buy these from. There should be a price per tire along with shipping. If nothing is specified ask the seller. I bought mine from Bike Nashbar. These are really great tires and long lasting. I was riding 25 to 30 miles per ride 3 to 4 days a week. Being Michelin they will hold up.
Has anyone found a suitable replacement for this AWESOME coffeemaker yet? Mine is just about on its way out...
I too have been looking for a replacement, their next generation, but haven't found one! They are great coffee makers!
Has anyone found a suitable replacement for this AWESOME coffeemaker yet? Mine is just about on its way out...
No, great machine. Mine was faltering so I bought a second one before they discontinued them. I now have them in two locations and I have to unplug one after each use as it will not shut off. Great coffee
Would this work on a little (pinky) toe?
In my opinion it might be hard. Because the pinkie is so short I think the toe wrap would just slide off. I have long toes and use it on the second and third toe and even then, it works it's way up. Sorry. :(
Would this work on a little (pinky) toe?
No! It's too big. Big enough for 2 big toes. Too big to be useful unless you have fat toes.
Would this work on a little (pinky) toe?
Yes, it's very flexible and extremely soft on my toes, and the loop is short enough for your smallest toe.
Would this work on a little (pinky) toe?
I purchased this for my Husband who uses it on his middle toes. He said he didn't see why it wouldn't work on the pinky toe but you would need longer and bigger toes--more like a man's pinky. All it does is wrap around the toes. So I guess it depends on how big your toes are.
Does it come with the High Speed USB 2.0 cable?
The scanner is supplied with USB cable (one side USB-A type connector and other side USB-B type connector)
Where can I find the install instructions to assess difficulty in installing this accessory?
Do a search for BT 35 USA SPEC. You can download the manual that's included.
Where can I find the install instructions to assess difficulty in installing this accessory?
Depends on what you are installing in. Here's a link for info I used for a 2004 4Runner. Took me about 3 hours today including vacuuming out the 4Runner afterward that needed it for a long time. Works and sounds great. http://www.castulucci.com/projects/carpc/oemnaviaccess/
How exactly does the firestarter mechanism work?
You pull out the piece I described and strike the thin rod against the teeth at the base of the knife. It will create sparks to use for starting a fire.
How exactly does the firestarter mechanism work?
Hi! The knife has a small magnesium insert so when you strike the insert piece with the back of the knife it creates a small spark to start a fire tinder bundle. My husband tested it and it did take a bit of time, but the spark was good and he said for as small as it is it's worth having for sure! There are some great videos on here that show it as well if you are interested in checking them out. Thanks for the question, hope this helps!
Can I use this mattress with a wooden platform bed with horizontal wooden slats?
I don't see a problem. I would probably lie a couple pieces of plywood on top just to be safe.
Can I use this mattress with a wooden platform bed with horizontal wooden slats?
I am using a slatted base and it works fine. I was worried about the foam bending through the slats, but it has not. I should also mention that I kept a clean piece of cardboard from the interior of the box that the mattress shipped in, and put this piece of cardboard under where our bodies go. It seems to have done the trick - and for free!
Can I use this mattress with a wooden platform bed with horizontal wooden slats?
If the slats are closely placed it shouldn't be a problem-if they're more than a few inches apart I'd get a piece of plywood or other foundation to lay over them.
Can I use this mattress with a wooden platform bed with horizontal wooden slats?
I'm not sure whether you can or not. I have mine on a box spring. My advice to you would be to call the company. They are very helpful.
Can I use this mattress with a wooden platform bed with horizontal wooden slats?
My guess would be yes. The mattress weighs 86 lbs which is less than a normal mattress of the same size. I have seen on a memory foam mattress site that the slats should not be separated by more than 3 inches. If the slats are wider you could place a piece of plywood on top of the slats or provide more slats. Hope this helps.
Can I use this mattress with a wooden platform bed with horizontal wooden slats?
Yes, this is the set up that I have with this mattress. You may wish to read my review of this mattress. I've not been satisfied.
Can I use this mattress with a wooden platform bed with horizontal wooden slats?
no it needs a flat support like a foundation or even plywood base. i just bought a foundation for a mattress store. it worked perfect
Can I use this mattress with a wooden platform bed with horizontal wooden slats?
We have ours over a piece of plywood which works well but i think wooden slats would be just fine if, as one of the reviewers said, they are fairly close together.
Can I use this mattress with a wooden platform bed with horizontal wooden slats?
I was told that you could when I bought the box spring from Sleep Country. I was going to buy a platform bed with slats but decided not to be because the bed was to low.
Can I use this mattress with a wooden platform bed with horizontal wooden slats?
We are using it with the Nordli bed from Ikea with the bottom of the line basic bed slats with no issues.
is this ok for appendix carry?
The versa carry is very comfortable. My husband uses it and has had no issues of any kind.
is this ok for appendix carry?
While I usually carry at the 4:00 position, I did try appendix carry to see what people were talking about. The Versacarry works quite well in this position. Depending what other equipment I carry, I often alternate between right and left side carry as my 380 is usally used as a "back-up" unless I'm dressing down. Then it becomes primary carry.
does coax come with this package if not what would 30 feet with connectors on each end cost
I ordered it with 50' of 50 ohm coax. If you have the cable 50 ohm with pl-259 male connectors on each end, no additional cable is required.
Will this screen protector work with an OtterBox Defender case?
I assume it would because it is so thin. No issue at all with adding bulk to the phone. I have a different case but I think it would work.
Does this computer still have a 10 hour battery life as a new generation Air or does it have old battery life pre-Haswell?
That's a good question. I don't see the battery life mentioned in the literature, but I don't think it has 10 hours of battery life. I'm prompted for a power source after a couple of hours. I have to say though, that I love this computer and highly recommend it. My husband is a software engineer. He chose the computer based on its specs out of a number of other options. He was so right. It's a powerful computer.
Does this computer still have a 10 hour battery life as a new generation Air or does it have old battery life pre-Haswell?
hello i need to know this laptop is coming with Retina display or it's old version display ?
The touch option comes off something but i dont press the bottom for it, what can it be that it doesnt let me touch the screen?
I am not sure exactly what the problem you are describing is, but I had a problem with my touch screen. For me, it would just stop working. At first I re-installed the driver, but that only worked for a short time. I contacted Acer customer support and after several attempts to fix it by reinstalling things, they said it was likely a hardware issue and that I would have to send it in for repair. I had only had my computer a couple days when this happened, so I returned it.
The touch option comes off something but i dont press the bottom for it, what can it be that it doesnt let me touch the screen?
My sister had the something similar. Her touch screen would work fine until it went to sleep. When she woke it, the touch screen would not work. Weirdly, hibernate worked as described. Rebooting the system would fix it temporarily.She fixed it by changing the power settings to stop it from sleeping. That fixed the problem. Really, you need to give us more information, as your question lacks specifics such as when this occurs.
The touch option comes off something but i dont press the bottom for it, what can it be that it doesnt let me touch the screen?
My sister had the something similar. Her touch screen would work fine until it went to sleep. When she woke it, the touch screen would not work. Weirdly, hibernate worked as described. Rebooting the system would fix it temporarily. She fixed it by changing the power settings to stop it from sleeping. That fixed the problem. Really, you need to give us more information, as your question lacks specifics such as when this occurs.
The touch option comes off something but i dont press the bottom for it, what can it be that it doesnt let me touch the screen?
It's a problem with the machine. It would do that whenever mine went to sleep and started up again. I tried everything, and talked to everyone with no success. I returned it. I got the V5-552PG-x809 when it went down to $669 and it is incredible. Everything works as it should.
does every item has a seperate battery..or do you only get 1?
I believe it still comes with the two batteries they advertise. When I bought my kit there was a special where I got another battery and bare tool for free.
Is this product tested on animals?
I don't have an answer to Ann's question. I've used the product with no adverse effects and it does help the pain.
Is this product tested on animals?
Yes...if you allow me,as a human, to be considered an animal. It didn't hurt me, but helped me handle pain. Good grief!
Is this product tested on animals?
There is no indication on the bottle whether or not there is testing on animals of the four legged type. It does tend to work well and has a pleasant fragrance.
How many watts is this charger?
I am not sure about the watts but the volts/amps are Input: 100-240V 1.5A and output: 19.5V 3.34A I hope this helps! Have a good day!
How many watts is this charger?
It does not specify watts but says it is the PA-21 family. See if that matches your model computer. Mine is a Dell Inspiron 1750.
What is native resolution?
I really dont know what native resolution is. I have just had it for 3 weeks and so far have seen no need to alter or adjustit as it is fine with me right out of the box. I may alter in the near future but am happy right now.
The sling threds through the stock on my stevens 320. will I need remove the sling or will this shell holder work over it?
It did cover the hole for my sling on the stock, so I cut a whole in it and that was almost a year ago and it hast tore up any since. looks just fine that way.
The sling threds through the stock on my stevens 320. will I need remove the sling or will this shell holder work over it?
It will fit in front of the stud or you can put a small hole in the shell holder and put the stud through the hole
if i have these on a switch? can i manually trigger them from inside the house or is motion/dusk the only trigger?
It has to be dark to trigger or dusk, you can turn on manually to test with time length button at the base of the lenses. This motion light is very durable and very motion sensitive, I keep three, just for backups, I have tried many motion lights that are blind and a waste of money, You can mount these anywhere with two sheet rock screws. I mount these outside where the rain hits them, I drill holes at base of bulb for drainage. Hope this helps?
if i have these on a switch? can i manually trigger them from inside the house or is motion/dusk the only trigger?
When you first turn them on they come on and stay on for a few minutes. You can set how long you what them to stay on for up to about 15 minutes. If you know wiring you could by pass the sensor so they would stay one as long as you wanted them too with a switch.
Does this memory also work for early 2008 Macbook models?
I installed this on my 2008 Macbook and it works great. I am not very technical but there is a video on the Apple website to show you how to install it. I did buy the small screw driver to help in the installation.
There appears to be a button on the outside surface of the device. Is that a standard Bluetooth answer/end call button?
No. The button is to change presets. I don't use the CS10 with a phone, but you can download the user manual from soundworldsolutions.com. Also, they are pretty good at responding calls. (I use the CS10 just to watch TV, and the more I use it the more I like it. Ir makes an instant difference the moment I put it on. I do not use the standard presets, but the customized ones via their app)
There appears to be a button on the outside surface of the device. Is that a standard Bluetooth answer/end call button?
There are two buttons on the device. One button is for volume control on headset and for answering calls, the other button performs three functions: switches between presets that come programmed in the device, it switches between environment modes if you have customized your headset using the free app and if you are connected to your phone and you receive a phone call it will end the call when pressed.
There appears to be a button on the outside surface of the device. Is that a standard Bluetooth answer/end call button?
There are two buttons on the out side. the one on the rear verticle surface is for the pre sets The one on the side is a volume control.
Is it necessary to wear socks while doing these DVD's? Some of her videos show girls in socks with the grip on the bottom.
No it is not necessary to wear socks while doing the Piloxing videos. It's easier without socks to me.
Are the threads "open" enough to drain henna/tea mixes?
We use them as bath towels, and they have a pretty tight weave. But with that said, they are thin, so using them to drain liquid mixes might work.
Are the threads "open" enough to drain henna/tea mixes?
They're not. You might want to look for cheese cloth instead. You'd lose a lot of color and moisture in these.
My heater is stuck on hot...even with dial all the way to the cold. I have no clicking sound and never had. Will this unit fix heater stuck on hot? I can use airflow in any position (floor, defrost etc) but it is always blowing hot air no matter what...
Yes this part should correct your temperature issues. Before buying this replacement part take the time to remove the glove box and lower panel to check if the actuator is working or not. By changing the temperature and defrost settings you will either see the actuator move (meaning it is working) or not move (meaning it has failed).
Does this bottle come with an 'eye dropper' tool to make it easier to manage how many drops of oil you add when mixing with lotions, etc?
Hi Kelly, it comes with a plastic insert that flows one drop at a time. The fragrance is amazing; a word of caution, it needs to be properly diluted as the citrus causes a "burning" sensation on the skin if too strong. I definitely recommend the do terra oils.
Does this bottle come with an 'eye dropper' tool to make it easier to manage how many drops of oil you add when mixing with lotions, etc?
These bottles do not come with droppers, but there is a small hole in the top to allow for only small amounts.
Does this bottle come with an 'eye dropper' tool to make it easier to manage how many drops of oil you add when mixing with lotions, etc?
It does not come with one, but if you already have one you can pop the plastic piece off the top and use one. Remember to always use glass or stainless steel with the oils since they will eat plastic.
Does this bottle come with an 'eye dropper' tool to make it easier to manage how many drops of oil you add when mixing with lotions, etc?
Hi Kelly, no it doesn't have a dropper but it has a special cap inside the bottle that allows a drop at a time to come out. These oils are amazing and have so many health benefits!
What age did your baby start using this?
I bought it for my daughter when she was 3 months old. Her feet did not touch the floor even at the lowest setting so I stuck something underneath it that she could put her weight on. Use your best judgement if you child is ready for something to stand in.
What age did your baby start using this?
He started using it at 3 months and he loves it still and he will be a year in November!Jackie
What age did your baby start using this?
I used it for both my kids. I put them in it as soon as they could steadily hold their heads and had enough back strength. I would say about 5 months old. The height is adjustable and my 18 month old still jumps in it!
What age did your baby start using this?
I bought it when he was 3 months, but he wasn't able to really use it till almost 4 months.
What age did your baby start using this?
My son started using this at 5 months, but his feet didn't touch the ground until he was about 6 months. I put a phone book under is feet until he was tall enough.
Does the board come with mounting hardware?
Yes, it does. My husband added a couple of extra screws but it does come with it to my recollection.
Does the board come with mounting hardware?
Yes. But all you need is one screw in a firm wall or stud and that does it. Firm as he'll if the wall or stud is good.
Where did this lens go? This lens has been out of stock at several outlets for a while. Is it getting replaced?
There is a new one. Panasonic Lumix G H-H020AK 20mm F/1.7 II ASPH Fixed Lens for Panasonic/Olympus Micro Four Thirds Cameras (Black)New version says "A new metal finish replaces the original 20mm lenses resin body, and combines with a durable metal mount for a sophisticated premium feel." other than that the only difference is the new one is now cheaper.
Where did this lens go? This lens has been out of stock at several outlets for a while. Is it getting replaced?
I guess that some outlets take advantage of short supply to crank prices up. We consumers should gain the upper hand by not buying at unreasonable prices. Yes... I also got it for 330 and for that price it's an awesome glass.
Product label says "non-serrated", but product description say "serrated"... Which is it?
Serated is a choice. I ordered the non serated. Great Swiss army knife. Saw them in Swtzerland, but can not find them in US. I have also bought several to give to friends. This help?
Product label says "non-serrated", but product description say "serrated"... Which is it?
I also received the non serrated version (which is what I wanted) based on the label 'NS'. Love this little knife!
Product label says "non-serrated", but product description say "serrated"... Which is it?
The one we got was non-serrated. Model number 54875. It has been a great knife.
Product label says "non-serrated", but product description say "serrated"... Which is it?
The product I received was non-serrated as desired -- that's what the "NS" suffix should denote.
Product label says "non-serrated", but product description say "serrated"... Which is it?
The trecker ns is the non-serrated version. The description is the generic description for the trecker and is not version specific.
What is the total length of the base? The cooking serface is 36" and the base appears to be longer by a few inches, but no dimension is offered. I hav
actual cooking area: 34" x 16" outer dimensions of frame: 36" x 18" width of frame including legs and bolts: 18-5/8" length of frame when legs are fully extended: 38-3/8" great product. haven't actually used it for grilling yet. first thing i did was fold legs open and stand on it. it was a little wobbly, but not much considering i weigh about 200 lbs. it's covered in oil to prevent rust. i'd suggest saving the box and foam sleave for clean storage.
Does the mount hold the wheel close enough to the bike frame that you might be able to use a U-lock to secure the wheel to the bike?
Yes, you can position the wheel mount close enough to the bike frame in order to use a U-Lock, as long as the U-Lock isn't too short.
Does the mount hold the wheel close enough to the bike frame that you might be able to use a U-lock to secure the wheel to the bike?
Yes it does. The tire can touch the black base which puts the tire about 2 in from the mouth mounting bar.Michael
Does the mount hold the wheel close enough to the bike frame that you might be able to use a U-lock to secure the wheel to the bike?
I suppose it could be close enough to lock onto the chainstay--it depends on the size of the frame and the configuration of the crossbars on your rack. I don't think I would use something heavy like a U-lock while driving, though, a bump in the road could do nasty things to your spokes!
Does the mount hold the wheel close enough to the bike frame that you might be able to use a U-lock to secure the wheel to the bike?
The wheel carrier mounts to the cross bar, so if you can get it close enough, and have a large enough u lock, it should be possible...
Is it support Windows 7? the title speak for itself, so can someone please help answer that. I 'preciate it
Hi,I asked Amazon customer service and this is the reply I got.Hello from Amazon.com.As informed by an appropriate department, this item "Seagate FreeAgent Go USB 2.0 Portable External Hard Drive" is compatible with Windows 7.I hope this information is helpful and thanks for shopping at Amazon.com.UPDATE: I purchased it and yes, it does support Win 7.
Is it support Windows 7? the title speak for itself, so can someone please help answer that. I 'preciate it
I need to backup a WINXP pc and then move the files to a new WIN7 machine, so I emailed Seagate and asked about compatibility. I just got a response that I think will be helpful to many Amazon shoppers. Here it is:"The Go is compatible with both operating systems. You will need upgraded software that we can provide so that the drive can be used to back up your W7 PC. If you will provide the serial number of the drive you purchase we will be happy to send you the software."UPDATE 12/18/09: I also purchased this cool little hard drive, and it works seamlessly with Win7. Seagate sent me the updated software, but I didn't need to use it. I definitely recommend the FreeAgent Go! I need to backup a WINXP pc and then move the files to a new WIN7 machine, so I emailed Seagate and asked about compatibility. I just got a response that I think will be helpful to many Amazon shoppers. Here it is:"The Go is compatible with both operating systems. You will need upgraded software that we can provide so that the drive can be used to back up your W7 PC. If you will provide the serial number of the drive you purchase we will be happy to send you the software."UPDATE 12/18/09: I also purchased this cool little hard drive, and it works seamlessly... » Read More I need to backup a WINXP pc and then move the files to a new WIN7 machine, so I emailed Seagate and asked about compatibility. I just got a response that I think will be helpful to many Amazon shoppers. Here it is:"The Go is compatible with both operating systems. You will need upgraded software that we can provide so that the drive can be used to back up your W7 PC. If you will provide the serial number of the drive you purchase we will be happy to send you the software."UPDATE 12/18/09: I also purchased this cool little hard drive, and it works seamlessly with Win7. Seagate sent me the updated software, but I didn't need to use it. I definitely recommend the FreeAgent Go! « Show Less
Is this unit strong enough to power a pair of jbl nd310's? if not what would i need?
Yes.This receiver will power any set of speakers I know of . Pioneer rates this receiver at 140 rms watts per channel. I cannot speak for pioneer but this receiver will get the job done. Hope that helps. Great Receiver.
Any idea where the blade's metal comes from? it's not marked on the blade.
The box says made in Taiwan and the blade has 4034 steel marked on it. 420 or 4034 stainless steels are the softest and least expensive. The presence of these steels usually means the knife is mass produced and imported from China. These steels are not brittle, but they do not stay sharp for long either. if you want a good edge try VG-10, it is stainless steel with a high percentage of vanadium content, which can hold an extremely sharp edge for a long time. 1095 carbon steel has a high degree of carbon in it for increased hardness; the legendary Ka-Bar fighting knives are made from this steel. H1 steel which is made with nitrogen instead of carbon, making it virtually rust proof. These knives are intended for extremely hard use by people doing stuff like salt-water sea diving. As with most things the better the material the higher the cost.
Found corrosion in connector. I wonder if the root cause of all these headlight failures might not be the bulbs but the "water proof" connectors
We found the same thing after we had already ordered received and installed the new light (which we bought here instead of the dealer's because of the large cost savings). My husband was a mechanic for 35 yrs and said certain types of connectors were more prone to it than others (we had two Volvos that he tracked down numerous electrical problems to them). He always puts connector grease on any fitting after trying to clean it with a very fine file, sandpaper, or solvent (and then blows it out with the air compressor before installing the new fitting with connector grease). We have been running this same light we bought on Amazon since 2008 when the 2007 factory installed light failed and have not had to buy another one. If they are exposed to a lot of waterspray like his fog lights, he sometimes puts a high heat silicone over them as well.
What difference would having quad core versus dual core have on a TV?
The quad core is a faster processor and will help speed up the Smart features of the TV. All things being equal it should open menus and apps quicker with the quad core. If you plan on using the Smart features then this becomes a significant benefit.
what material is this made of. Sunbrella? Fade resistant?
we bought ours last summer- i haven't noticed any fade, but we did bring them in during the winter (Colorado) they are made of a some sort of softer version of canvas. overall i would recommend. as far as color they are a bit more of a burnt orange.
what material is this made of. Sunbrella? Fade resistant?
Not sunbrella, but very fade resistant. I have some sunbrella and it is much coarser-this is like a heavy nylon with a silky feel. It is a rich burnt orange. I live in So. Ca.
what material is this made of. Sunbrella? Fade resistant?
I'm not sure of the material. It appears to be a type of nylon. It has faded just a little.
SD 850 Battery Status How do you handle the fact that there is no indicator of battery status? I've never waited for the low battery light to come on because of fear it will come on when I need the camera most. How is everyone else handling this? SD 850 Battery Status How do you handle the fact that there is no indicator of battery status? I've never waited for the low battery light to come on because of fear it will come on when I... » Read More SD 850 Battery Status How do you handle the fact that there is no indicator of battery status? I've never waited for the low battery light to come on because of fear it will come on when I need the camera most. How is everyone else handling this? « Show Less
I have the SD700 and I am looking to upgrade to the 850 or something similar. Both seem to have the same battery indicator issue. It would be really nice for them to include an indicator but, alas, no. So what I do with the 700 is 1) have a second battery. I rarely need it but it is good to have on vacations and other high use periods. 2) The battery will last for WEEKS when I am not using it to often, so when its convenient I throw it in the charger. It usually takes less than an hour to come to a full charge. Good luck!
can this be used to power a 110v lightbulb?
An incandescent light bulb can be viewed as just a simple heating element. So yes, you can use this converter to drive a 110V incandescent light bulb from 220V AC. However, do NOT try to drive a CFL or LED light bulb with it.
My 10 year old daughter wants one for Christmas to practice her softball pitching (fast-pitch, hard ball). Has anyone used this net for this purpose?
she could do it, but no what its made for. It's more designed to work on defense (in my opinion)- the ball is not going to come back to her when at a pitching distance- if she doesn't mind going and picking the ball up after she pitches, then it would be okay.
My 10 year old daughter wants one for Christmas to practice her softball pitching (fast-pitch, hard ball). Has anyone used this net for this purpose?
My ten year old son uses it for defense. Great for defense but I don't believe the ball will return at pitching distance. If it doesn't return completely it's still better than throwing at a five gallon bucket.
My 10 year old daughter wants one for Christmas to practice her softball pitching (fast-pitch, hard ball). Has anyone used this net for this purpose?
My eight year old grandson loves it and doesn't mind go after the ball when it doesn't exactly return to him. But once in a while (when he pitches to the lower part) it does return to his surprise. It it well made and easily put together.
It says microwave safe - are they dishwasher safe? Also, if some arrive chipped or broken, will you replace them? I ordered four sets!
The dishes arrived in perfect order. They are indeed microwave and dishwasher safe. I have chipped one but they are quite sturdy dishes and I really like them.
difference with aprilaire 210 filter
this is the recommended brand for our system so I'm not going to try any other brand.
difference with aprilaire 210 filter
The 210 has a MERV rating of 210 and the 213 has a MERV rating of 213. The higher the rating the better it will filter small particles.
does it have any anti-virus protection,or any security
No, best to invest in one. Even if Windows comes preloaded on your tower, it won't even come close to deal with all the spy/malware and viruses out there.
will it fit on my us army alpha?
I'm not sure if the alpha has a picatinny rail but it fits on my project salvo
will it fit on my us army alpha?
It should however it did not fit on my bt delta elite although tippmann an bt rails are different but yes it should the grooves seem deep enough
Why are there three connections? Can I use two of them to plug this fan into a 12v battery?
Yes, the three wires consist of a pos, neg, and the third wire lets the motherboard read the rpm of the fan. so just find the pos and neg and your good to go.
I have an older crate and the dimensions are W 24 X 42 L is there a replacement pan for this crate? It is Midwest Home for Pets Model 86Z.
I am sorry we do not have that size, I would suggest you contact the manufacture.
When I use on my new 01781 canner the pressure reads 14 PSI. Is it safe to assume the guage is off by 1 psi?
One pound of pressure difference isn't going to affect the temperature in your cooker by enough to do harm. Thirteen, fourteen, or fifteen pounds of pressure will work equally well, so the reading doesn't make a lot of difference in any case.
When I use on my new 01781 canner the pressure reads 14 PSI. Is it safe to assume the guage is off by 1 psi?
I would ask if you are at high elevation, as per the canning books by Ball describe. I am at sea level but can get my gauge to go up and down as I need.