query
stringlengths 20
2.05k
| answer
stringlengths 75
2.05k
|
|---|---|
Factory refurbished?? What does it mean by factory refurbished? It makes me think of a car that has been in a bad wreck and needed to be rebuilt.
|
Usually refurbished means that it was once in the hands of the consumer who returned it for some reason, maybe it did not work, maybe they decided they did not want it. Either way, it is tested and looked over (usually my the manufacturer) and resold as a refurbished item. Usually Refurbished items are a good bet as they have been looked over and tested by a technician, where as only a few new items are tested.
|
Factory refurbished?? What does it mean by factory refurbished? It makes me think of a car that has been in a bad wreck and needed to be rebuilt.
|
Refurbished units are almost always good deals. Except for an insert statement indicating that my 340S was a refurbed unit, it looked brand new. Note that most recent map updates are not part of the refurbed package, but then I avoid the hassle and hazards of such downloads anyway. For the basic purpose of getting from point A to point B such updates are of little value to the vast majority of users.
|
Factory refurbished?? What does it mean by factory refurbished? It makes me think of a car that has been in a bad wreck and needed to be rebuilt.
|
I have had good experiences with refurbished devices. You should be aware that it may have slight rubs or marks on it. It has been used. So it may be better for your own personal use as opposed to a gift. However, I have bought refurbished that looked brand new and would challenge anyone to be able to tell it used refurbished.
|
Factory refurbished?? What does it mean by factory refurbished? It makes me think of a car that has been in a bad wreck and needed to be rebuilt.
|
Have to agree with comments regarding refurb units. Buyer beware however that the maps will almost never be the newest available and my units maps were three updates old. The cost to buy the new maps would have meant the refurb unit + map upgrade would be same price as a new unit. Mmmmm. Aside from that annoyance and the refusal of TomTom to allow a free upgrade to new maps, the unit looks good as a new one.
|
Factory refurbished?? What does it mean by factory refurbished? It makes me think of a car that has been in a bad wreck and needed to be rebuilt.
|
I am shopping for my 1st GPS. TomTom 340TM is supposed to include free maps for the life of the device. How can they refuse to upgrade the maps on your refurb? [email protected]
|
I have a springfield xdm 4.5 9mm..... will this work with the xdm's?
|
This will not work with the XD(M) models it was made only for the original xd you need model #LG-487, LG-487 laser sights attach to the pistol by utilizing the replaceable backstrap feature of the XD(M) with a rear activation switch. If you are still not sure just go to crimsontrace.com and it will show all the models and info you need.
|
I have a springfield xdm 4.5 9mm..... will this work with the xdm's?
|
Absolutely, after buying other laser products, I broke down and bought a CT for my XDM and was impressed with the feel and operation. Adds a little 'fat' to the grip but does the job.
|
I have a springfield xdm 4.5 9mm..... will this work with the xdm's?
|
Not 100% sure. But since it's localized at the grip, I don't see why it wouldn't. I love it. Works great.
|
I want these chains to fit the front tirers 24x8x12 with not much clearance will these chains be to loose?
|
Once the chains are on, you should get the rubber stretchie things That hook on the chains on the outside of the tire and keep the chains tight to the tire. I also took some wire and tied the loose links to the chains so they don't bang on the fender, where they connect. JM
|
I want these chains to fit the front tirers 24x8x12 with not much clearance will these chains be to loose?
|
The chains fit snug if installed properly. You also cross a pair of bungees across the face of the wheel to tighten them even more
|
does this model have a humidistat?
|
Yes but it does not necessarily give an accurate reading. I believe that it gives a high reading most of the time when I have compared it with another non digital humidistat. But you can set it to turn off automatically at a certain reading.
|
does this model have a humidistat?
|
Yes it does. It is on the top display of the machine. You ahve two displays, one is the ambient temperature and the other is the humidity level. You can adjsut the level using the buttons below the display. IF you want RH (relative humidity) of 35% then you push the down button till that is in the display. After a moment the display goes back to what actually IS the RH. It usually lines up pretty close to what my indoor weather station displays. They are not awlays the same but usually close. Hope this helps.
|
does this model have a humidistat?
|
You can set the humidity on the control panel but the machine runs no matter how low the humidity goes. You can read on the panel the current humidity in the room. It will lower humidity. It will never turn on and off like a regular dehumidifier.
|
does this model have a humidistat?
|
Yes, it has a gauge so you know what the humidity rate is in your room or house.
|
does this model have a humidistat?
|
No, it has a control switch that controls to different humidity levels, but the specific humidity levels are not marked at any of the points on the dial.
|
Download from Dishnetwork DVR possible? Can you use this to download programs from a dish DVR or do I need to buy the pocket dish from dish network?
|
Yes, I just received my 705 today and downloaded no problem from a VIP 622. I used the USB cable included with the 705. 1. Download and install plugin. 2. Make sure Archos is in Windows Media Player mode (DRM enabled) and not hard disk mode 3. Connect devices together via USB cables (I used the front USB port behind the door) 4. Follow onscreen prompt to use USB device. 5. Select Archos 705 from list on left 6. Select "Send to device" to get to show listing Notes: HBO and Cinemax recordings cannot be transfered due to some stupid copy-protection Dish turned on. They have a note up on their site about it. I have Cinemax and Showtime - Showtime works, Cinemax doesn't. Idiots. This is one BIG point against it which is making me second-guess the purchase since Dish integration was my primary reason to buy it. Shows can be batch transferred (thank god) SD only "at this time" according to the popup. No HD recordings. Shows are listed in recorded order (no folders)
|
Is there a metal filter I can buy that will fit this particular funnel? This is my top pick for my wide mouth jars, just no filter included...
|
Not that I'm aware of. You might try a fine mesh strainer that would sit on the rim and extend down into this. That would give you the straining capability as well as make sure everything went into the canning jar or whatever you want filled with liquid. It would also allow you to dump the particulate matter as it builds up in the strainer.
|
Will this wallet hold .17 HMR rounds too? Concerned about the bullet length
|
Should have no problem holdind 17 HMR rounds. I do believe the base is the same diameter as 22 mags.
|
Will this wallet hold .17 HMR rounds too? Concerned about the bullet length
|
Yes, holds 17 HMR perfectly. In fact because of the bottlenecked shape, they pop out even easier than the 22 LR, or 22 Mag. As the 22 Mag is the widest, it stretches the clips a bit so the 22 LR and 17 HMR are not quite as tight after holding a 22 Mag. Great product.
|
Will this wallet hold .17 HMR rounds too? Concerned about the bullet length
|
It holds 22 mags with plenty of room, not sure how long the 17 HMR compares to the 22 mag I think it would work. Also, Tuff Quick strips are great
|
Will this wallet hold .17 HMR rounds too? Concerned about the bullet length
|
well....I don't have any .17HMR rounds handy...so I'm not sure...it will hold .22 WMR rounds with no problem,if you can compare the length to 1 of those..
|
Will this wallet hold .17 HMR rounds too? Concerned about the bullet length
|
OAL of 17 hmr is the same as 22 mag, (34.3 mm) that is why you can use same mags in rifles chambered for 17 hmr or 22 mag. So, this wallet should work ok.
|
Can I turn the unit on and off? If so, is this easily done?
|
There is not an on off switch on mine. You can unplug the unit to turn it off.
|
Can I turn the unit on and off? If so, is this easily done?
|
Yes there is a switch on the front in the blue area like a light switch. It's under the plastic coating toward the top of the blue oval in the picture.
|
Can I turn the unit on and off? If so, is this easily done?
|
It is if you wire it through a regular wall switch. I had mine wired to a switch with a red light on it. Then I could see at a glance if it was on or not.Otherwise you can only turn the temperature down and only by removing the blue plastic oval on the front. It's a great little water heater for a trailer or RV. Hope that helps.
|
Can I turn the unit on and off? If so, is this easily done?
|
We use ours on our motor home. We unplug the unit when not in use. As far as we remember there is not an on/off switch. Once you plug it in it immediately starts heating and only takes a few minutes for hot water. When you use the 6 gallons it will reheat quickly. When we are home we are not running electricity to the motor home so the unit stays off. We have had our unit about 2 years and are very happy with it.
|
Will the Keurig Rivo pods work in this?
|
If the pods are like k cups.... If it has a netting underneath it won't.. Awesome product , worth the money.. F.y.i. I used the stews and adhesive to install..
|
Will the Keurig Rivo pods work in this?
|
I'm so sorry Rob,I don't know the size difference between the regular cups and the Rivo.
|
K I ordered these 7 weeks ago did the boat sink or what?
|
I ordered 1 month ago and it just showed up in USA, have some patience, so far the seller is trusted i guess
|
K I ordered these 7 weeks ago did the boat sink or what?
|
My blades arrived after a month's wait. For the price, the wait's not bad. I make my purchase of another supply as soon as I'm down to the last 8 blades.
|
K I ordered these 7 weeks ago did the boat sink or what?
|
It all comes from China... no matter what they say. look at "Estimated delivery time" if it says 17-26 days is china for sureEdited to add... it takes about a month from china
|
what is the complete list of ingredients ?
|
Vitamin A, C,D,E, Ceramide-PCD (providing glycopids, phytocermides & glycosylcerimides). Other ingredients: Vegetable cellulose capsule, Purified Water, Magnesium Stearate, Stearic acid, Silon dioxide. This is right off of the label. Hope this helps you.
|
Can someone tell me how much heat (in degrees) these beakers can withstand?
|
Borosilicate is a form of Pyrex so I guess quite a lot. I use mine as a double boiler, and for heat producing chemical reactions upwards of 310F.
|
Screen shows green line in black area in some positions of screen is this cable issue
|
My first guess would be that you need to replace the screen. They are pretty flimsy. It could be the LCD wiring from the motherboard to the screen, but I haven't every had issues with the cords.
|
How do you play C on this Bb trumpet?
|
On the Bb trumpet, to play C, it's all open fingers meaning you do not need to use any of the 3 keys to play C. Hope this helps!
|
How do you play C on this Bb trumpet?
|
It is a trumpet designed for a student, not for Arturo Sandoval or Dizzy Gillespie. Give me a break!
|
1) Most importantly, how long does it take to get a read? 2) What battery does it take / does anyone know how difficult it is to change the batt?
|
The temperature reading is basically instant. But I wait about 5 seconds to make sure. The battery is a button type and you twist the head off to replace it. I have not replaced the battery but looks easy.
|
Will the suction cups stick to a fiberglass tub that has a roughened "sand-like" safety coating on the bottom? If no, can it still be used safely?
|
Yes, I have that kind of tub and it actually is fairly hard to move from its position.
|
Will the suction cups stick to a fiberglass tub that has a roughened "sand-like" safety coating on the bottom? If no, can it still be used safely?
|
Yes the suction cups stick extremely well to my tub which is also a fiberglass tub with the roughened sand like coating much like yours.
|
Will the suction cups stick to a fiberglass tub that has a roughened "sand-like" safety coating on the bottom? If no, can it still be used safely?
|
Yes. It just needs some pressure once it is put into the tub. My sweetheart placed it so that it was exactly equal in the middle of tub and then sat on it to secure it and made it raise up and down. It is just the best invention ever !!
|
how much water does it hold?
|
about thew same amount as would be found in a 16 ounce glass of water...but the things themselves....are disposable junk. If they last a week...consider yourself lucky.
|
how much water does it hold?
|
It holds a good 2-3 cups water. I use mine all the time and it seems to last a long, long time before having to refill. And my fan it still running strong on original batteries I put in them over a month ago.
|
Hi. Some reviews suggest at shallower angles (17) the stone can hit the knife clamp. Is that so and will this device sharpen thin narrow fillet knives
|
I think the stone hits the clamp at angles greater than 17 and that seems to be a design flaw in my opinion.
|
Hi. Some reviews suggest at shallower angles (17) the stone can hit the knife clamp. Is that so and will this device sharpen thin narrow fillet knives
|
Look for YouTube uploader "DeanO". He does a lot of KME use videos and he shows how to deal with this problem. His videos are very helpful.
|
Hi. Some reviews suggest at shallower angles (17) the stone can hit the knife clamp. Is that so and will this device sharpen thin narrow fillet knives
|
The reviews are correct. I cannot sharpen fillet knives with the KME system.
|
I'm specifically interested in whether it has 1:1 pixel mapping?
|
Yes, tested here, search page for "pixel." http://www.projectorreviews.com/viewsonic/viewsonic-pro9000-projector-performance-2-2/
|
Want to purchase this, but seems like many reviews say seats too low in back, cushions not thick, seats uncomfortable, but gets good reviews?!? Why?
|
We love our set. My husband is 6'1 and has no problem. We've had it all summer and have no complaints. I haven't washed the seat covers yet so can't speak to how easily they clean up from outdoor use, but we are very happy with our purchase.
|
Want to purchase this, but seems like many reviews say seats too low in back, cushions not thick, seats uncomfortable, but gets good reviews?!? Why?
|
I suppose that feedback is true, but not a problem for us. The cushions are a little stiff at first, but they need a little break in
|
Want to purchase this, but seems like many reviews say seats too low in back, cushions not thick, seats uncomfortable, but gets good reviews?!? Why?
|
I think the cushions are very thick and comfortable. The height is normal for patio lounge furniture. It looks like what you find in a high end hotel or outdoor bar. The one real negative for me is some if the cushions hold water for a few days after a rain. I expected better weather tolerance.
|
Want to purchase this, but seems like many reviews say seats too low in back, cushions not thick, seats uncomfortable, but gets good reviews?!? Why?
|
I saw the mixed reviews and ordered anyway because of the price. This isn't a $3,000-5,000 set so if you keep your expectations in line you'll be pleased. I love it. It's a low back compared to a dining chair but plenty comfortable for my standard sized husband. We have spent many an hour happily lounging under the stars.
|
Is this the real thing?
|
I don't know what you mean by the real thing except yes it is name brand and the same as I bought originally through a chiropractor (when visiting CA) as an Isagenix dealer. I'm not sure the price is much better than a local distributor in your area. It is clumpy when mixed in a glass, so better to use a blender. Hope that helps.
|
Can you use it to make red velvet cake?
|
YES!! I used it for red velvet cake and it worked great! gave it a great color
|
Can you use it to make red velvet cake?
|
I just did last week, and I'm going to again today. By the way, try the Cook's Country red velvet cake recipe. The BEST !!!
|
Is the cut height vertically adjustable? I want to cut slots on the centre line of 15 mm (5/8") board
|
As far as I know yes it is adjustable that is if I understand the question But it only adjust so far I hope this answers your question! ED.
|
What is the liner like in this jacket?
|
Detail here: http://www.columbia.com/Women's-Splash-A-Little%E2%84%A2-Rain-Jacket/RL2150,default,pd.html#detailsTab
|
Hello, can you easily take the dust cover on and off? Does it get in the way when it's on? Thanks!
|
Is not in the way and I believe it doesn't come off. Not sure why you would want to
|
Hello, can you easily take the dust cover on and off? Does it get in the way when it's on? Thanks!
|
Not easily. I tried, and it looks like it might come off, but I'm not willing to break it to find out. When you lift it, it friction-locks in place off to the side with a spring mechanism, so it's not going to flap around.
|
Hello, can you easily take the dust cover on and off? Does it get in the way when it's on? Thanks!
|
The dust cover is not removable, but not much of a problem during use - only if you're right on top of the magnifier could it get in the way. btw - i really love this lamp!
|
Hello, can you easily take the dust cover on and off? Does it get in the way when it's on? Thanks!
|
The dust cover does not get in my way at all. I have not found the need to take it off since it is a nonissue. Great light
|
Hello, can you easily take the dust cover on and off? Does it get in the way when it's on? Thanks!
|
getting in the way will depend on how you're using it and what you're trying to do. as far as i could tell, it won't come off easily. i'm sure if you worked at it enough you probably could remove it. this may not be much of an answer but the unknowns are an individual situation.
|
Is there some special way to attach the chuck? It seems like it just slips on, and then easily falls off. I don't see any mechanism to tighten it.
|
I had mine come off when I first got it, I put a wood block under it and press the chuck down on it. Haven't had the problem agin. Hope this helps.
|
Is there some special way to attach the chuck? It seems like it just slips on, and then easily falls off. I don't see any mechanism to tighten it.
|
Many drill presses have a press fit chuck. Clean the inside of the chuck and the out side of the shaft completely. Put something solid under the chuck and pull down on the handle to force the chuck home firmly. Then tap with a hammer to tighten with a wood block between hammer and chuck.
|
Is there some special way to attach the chuck? It seems like it just slips on, and then easily falls off. I don't see any mechanism to tighten it.
|
Use your key to tighten the chuck, then use a wood block and hammer to tap and lock it in. Be careful not to damage chuck.
|
Is there some special way to attach the chuck? It seems like it just slips on, and then easily falls off. I don't see any mechanism to tighten it.
|
When I received the drill press, the chuck was attached. I don't see how it can be removed. You will have to check with the supplier.
|
Is there some special way to attach the chuck? It seems like it just slips on, and then easily falls off. I don't see any mechanism to tighten it.
|
Hi . Yes that's quite correct, like most drill presses, the chuck is held on by a Morse taper. Make sure the taper on the shaft and the bore in the chuck are both absolutely clean and undamaged then tap on the chuck with a bit of wood and a hammer. Remove the chuck with a forked wedge, I just used a pair of long nose pliers. That's all. Best regards T
|
Is there some special way to attach the chuck? It seems like it just slips on, and then easily falls off. I don't see any mechanism to tighten it.
|
I have not had that problem; I do not recall having to install the chuck on the shaft initially. Tony's response seems logical.
|
Once the keyboard is installed and connected via bluetooth, can the phone make other bluetooth connections? I.E. bluetooth audio in my car.
|
I have been able to perform multiple Bluetooth actions will my keyboard was connected.
|
Once the keyboard is installed and connected via bluetooth, can the phone make other bluetooth connections? I.E. bluetooth audio in my car.
|
Good question I doubt it though I have never tried it but I highly doubt it
|
Once the keyboard is installed and connected via bluetooth, can the phone make other bluetooth connections? I.E. bluetooth audio in my car.
|
Yes it can ya phone can hold several bluetooth connections at one time it will all just work as needed
|
does this have canada on it and is there any way to update it?
|
I'm not sure it was a gift. But I think it does and you can update it online.
|
does this product work well on natural hair? (afro) looking for a great product for cold weather
|
I wouldn't know because I have very thin straight hair. It works well for me. I would say give it a try
|
does this product work well on natural hair? (afro) looking for a great product for cold weather
|
Many of my relatives used this product and they have the same results they felt their hair started to become more shinny .. I am not sure about cold weather countries because I live in a dry hot country
|
does this product work well on natural hair? (afro) looking for a great product for cold weather
|
I left a good review for this product but I did not get a chance to rewrite it. The thing is I am sure- that this product sold by this specific seller is fake- please read other reviews. It is way too runny and something is just wrong. As for the product itself - it is a good product but try to find it from another seller. It seems that this seller sells fake products.
|
does this product work well on natural hair? (afro) looking for a great product for cold weather
|
I'm caucasian, but my hair has become softer, yet curly as I've grown older. The product is very full-bodied and might work well.
|
does this product work well on natural hair? (afro) looking for a great product for cold weather
|
My hair is chemically straightened, but 75% of my hair dresser's clients are going natural. She uses this product on all of her clients' hair (mine as well as the natural one) and it is absolutely soft and beautiful! Seeing the results of this product on natural hair is making me really consider going natural also.
|
Is this lens good for indoor shots? Not necessarily super low light, but not as bright as full, outdoor light. Or would the 20mm f/1.7 be better?
|
In my experience, the lens is a mixed bag for interior shots. The great part is 28mm (equiv) can capture a lot of interior space but I have to increase the ISO to capture a shot depending on lighting conditions. The 20mm is a great lens (which I totally regret selling). The drawback is that you capture less interior space because of the 40mm (equiv) focal length. But it works great in low light. Try to get a Gen 1 20mm as DXOMark says its sharper than the 2nd gen model. I had the 1 gen. model and it was tack sharp.
|
Is this lens good for indoor shots? Not necessarily super low light, but not as bright as full, outdoor light. Or would the 20mm f/1.7 be better?
|
This lens works good in low light, but of course one stop faster would better. However, the 14mm lens is a wider angle lens, so better for tight interior shots.
|
Is this lens good for indoor shots? Not necessarily super low light, but not as bright as full, outdoor light. Or would the 20mm f/1.7 be better?
|
The 24 is a good all around but I think the 20mm 1.7 would be superior for low light interior shots.
|
Is this lens good for indoor shots? Not necessarily super low light, but not as bright as full, outdoor light. Or would the 20mm f/1.7 be better?
|
20mm would be much better for indoor. The 14mm is a great companion anywhere, but the 20mm is a better choice for low light and indoor photography. It's rare that you'll need a wide angle indoors, unless you live in a castle or mansion. My guess is you've asked this question because you want to take photos of people. So get the 20mm.
|
Will this work with the Tough E-mount?
|
Piece of junk. Will not focus to infinity. Best is Voightlander Close focus. 300 but worth it. I went through 4 before I found it.
|
does this work with galaxy tab 4?
|
It 's a Bluetooth device so it should work with just about any enabled tablet. I have used it on a Galaxy Note, Galaxy Tab 3, 3 lite, and MS surface
|
can you use this on a laser printer
|
You can use the paper in a laser printer, but be sensitive to the paper path. I use it in a Canon MFC8530, and I even print duplex (double-sided) with it. But I put it in the manual feed tray, and select the heavy weight glossy setting (there are multiple). The paper path in the Canon MFC8530 is very straight, front to back over the laser drums, and the duplexer doesn't have a lot of extreme corners (though there is one in back). Really important to set the correct weight and glossy setting. The other precaution I use is to only feed 6 or so pages at a time through the manual feeder. I noticed if I try to go to aggressive, I get misfeeds because the initial sheet picker is sensitive. You can use the paper in a laser printer, but be sensitive to the paper path. I use it in a Canon MFC8530, and I even print duplex (double-sided) with it. But I put it in the manual feed tray, and select the heavy weight glossy setting (there are multiple). The paper path in the Canon MFC8530 is very straight, front to back over the laser drums, and the duplexer doesn't have a lot of extreme corners (though there is one in back). Really important to set the correct weight and glossy setting. The other precaution I use is to only feed 6 or so pages at a time through the manual feeder. I... » Read More You can use the paper in a laser printer, but be sensitive to the paper path. I use it in a Canon MFC8530, and I even print duplex (double-sided) with it. But I put it in the manual feed tray, and select the heavy weight glossy setting (there are multiple). The paper path in the Canon MFC8530 is very straight, front to back over the laser drums, and the duplexer doesn't have a lot of extreme corners (though there is one in back). Really important to set the correct weight and glossy setting. The other precaution I use is to only feed 6 or so pages at a time through the manual feeder. I noticed if I try to go to aggressive, I get misfeeds because the initial sheet picker is sensitive. « Show Less
|
can you use this on a laser printer
|
Anytime I use card stock on a laser printer, I use the manual feeder on the side of the machine to prevent bending. I haven't tried the glossy through a laser printer, but based on the other responses it works fine if you use the correct settings, etc (see Willy's response, for example). I didn't use mine for photos, I was making scratch-off cards for my students, and as Jennifer was saying, the ink did bleed a little, but only on one of my designs. Otherwise, I am very happy with the results, but I used an ink jet.
|
can you use this on a laser printer
|
That's what I use it on, yes. It wont give you a glossy "photo-like" prints, but it will work.
|
can you use this on a laser printer
|
I have used it on a laser printer -color - without a problem. Works well colors are brilliant
|
can you use this on a laser printer
|
You can use the paper in a laser printer, but be sensitive to the paper path. I use it in a Canon MFC8530, and I even print duplex (double-sided) with it. But I put it in the manual feed tray, and select the heavy weight glossy setting (there are multiple). The paper path in the Canon MFC8530 is very straight, front to back over the laser drums, and the duplexer doesn't have a lot of extreme corners (though there is one in back). Really important to set the correct weight and glossy setting. The other precaution I use is to only feed 6 or so pages at a time through the manual feeder. I noticed if I try to go to aggressive, I get misfeeds because the initial sheet picker is sensitive.
|
can you use this on a laser printer
|
i only used it on inkjet. but the ink spread out on the paper. the pictures i printed looked like big pixelated photos. It was almost like the ink bled a bit. It was all blotchy looking like mosaic tiles. The paper was also very thin and i wouldn't call it cover stock at all. it was almost thinner than regular kodak photos.
|
Will this holster accommodate the FNX in 45 acp?
|
I Don't think it will I looked at the FNX in 45acp and from what I remember it is slightly wider. But the holster is of highest quality and I use it to carry every time I carry my FNX.
|
Will this holster accommodate the FNX in 45 acp?
|
IDK of it will, I have the FNX-9 and it holds it perfectly. Your best bet might be to go to a local gun store and do a side by side check between the two to make sure.
|
Will this holster accommodate the FNX in 45 acp?
|
Not sure. To find out if the FNX 40 and 45 have the same specs go to FNHUSA.com and look at the spec sheets for both pistols. That would answer your question.
|
I can only get camera one to work. It keeps saying camera 2 is out of range, How can I get camera two to work?
|
Hi,make sure both cameras are on, press the small camera icon button to switch between them....works for me
|
does this fit the 1000>?
|
I'm not sure man. I don't know the cage specs on the other machines. Maybe go to a polaris page and see if the cages are the same dementions
|
compare classic to ultra What makes the ultra worth $40 more? It seems the only advantage is the tripod option. What am I missing that makes it that much more expensive? Please help.
|
thank you for posting. I had the same question about how the classic compares to the ultra, in considering it as a christmas gift for my husband. this was exactly what I needed! The Ultra, it is!
|
compare classic to ultra What makes the ultra worth $40 more? It seems the only advantage is the tripod option. What am I missing that makes it that much more expensive? Please help.
|
Try this link from their websiteI bought the Ultra yesterday.http://www.flipvideo.com/products_flip_ultra_specs.II.shtml
|
will this fit a 1996 ford f--350 motor 7.3 2wd
|
this is for Chevy cavalier 1996 to 2004. Chevy is made by GM and ford is made by ford I do not think that it will fit. Cavalier is a small car and f350 is a big truck.
|
will this fit a 1996 ford f--350 motor 7.3 2wd
|
I am not sure but we used it on a Chevy cavalier because the zip ties we used finally broke. Hope this helps if it doesn't good luck!
|
I apologize if I overlooked it; however, what are the sign dimensions?
|
The overall size of the light sign is fixed to 12 inch (300 mm) x 9 inch (220mm).
|
is this a kit or a ready to play with car?
|
Hello Penelope, This is a plastic model kit with many small fragile pieces that need to be assembled to make the Nissan. Once put together, it is not really a toy to play with. If you have any other questions or concerns, feel free to ask! Model Empire Inc.
|
is this a kit or a ready to play with car?
|
Very much a kit, and not particularly playable...designed for display. Great kit though, enjoyed building it and very detailed.
|
Does it gets too hot when charging a phone ?
|
My s4 can get warm while charging with this wireless receiver. Almost uncomfortable but not enough to worry about it
|
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.