Datasets:
sentence-transformers
/
amazon-qa

Dataset card Data Studio Files
xet
Community
query
stringlengths
20
2.05k
answer
stringlengths
75
2.05k
how do you mount this mailbox to the wall?
I mounted this to the vinyl on my house instead of my brick. I used a piece of wood across the back of it to make it flush on the siding. The wood was the width of the box and maybe 3in wide.
how do you mount this mailbox to the wall?
We used a real strong adhesive/sealant Make sure the surface is clean and not a rough surface. It is like impossible to mount with any type of hardware.
how do you mount this mailbox to the wall?
I used Velcro tape with one sticky side of the tape on the box and the sticky side of the mating tape against the wall. The tape is 2 inches in width and I used two strips.
how do you mount this mailbox to the wall?
Make a template. Get a piece of paper. Turn over the mailbox. Use the holes in the back of the mail box and place the paper over it. Use a pencil and poke through the holes. Attach the paper to the wall with tape, drill your holes, use toggle bolts if you need. Don't screw the screws in all the way. Hang the mail box. It's great by the way.
how do you mount this mailbox to the wall?
my mailbox is mounted to a wood fence. My son in law placed it on a piece of wood and nailed it to the fence. Hope this helps you.
how do you mount this mailbox to the wall?
There are holes in the back of it that are tapered to fasten to screws you put in the wall
how do you mount this mailbox to the wall?
I mounted to an exterior stucco wall. So I cut a scrap piece of redwood fence board to fit the recess in the back of the mailbox (any painted board should work). Using 2 "deck screws" I mounted that firmly through the stucco to the sheathing underneath. Then two small screws through the eyelet hangers to install the mailbox. Lastly a pan head screw through the center hole. (So the box can not be removed from the wall). Total of 5 screws, 2 - 1.75" exterior wood screws, 2 - 3/4" small screws, 1 - 3/4" pan head screw.
how do you mount this mailbox to the wall?
There are two screws that fit into holes on the back of the inside of the mailbox. Mine is screwed into a wooden fence. I'm not sure how you would affix it to a brick wall, but anything that takes a screw should work.
Does this fit the Nokia Lumia 1020 unlocked GSM version?
This fits the locked sim version, I don't see a reason why it wouldn't fit. The dimensions are the same and the only difference between locked and unlocked is software.
Does this fit the Nokia Lumia 1020 unlocked GSM version?
I only know that it fits my Nokia Lumina 1020. I got my phone from a local AT&T; store. I don't know what GSM means.
is the cotton from the USA or another country?
Made in the USA with cotton from Africa (fair trade model) http://www.1888mills.com/MadeInUSA.html Made of 100-percent African cotton sourced from the Cotton Made in Africa project Sales contribute to poverty reduction for more than 265,000 African farmers
is the cotton from the USA or another country?
My towels, received in April, have a tag that says, 'Made in USA from imported yarn'.
is the cotton from the USA or another country?
Hello Mike D, I'm sorry I'm late answering your email, I don't check them very often. From the research I've done, it says "native organic Pima cotton". I take that as grown in the U.S.A. I hope this helps. Again, sorry I'm late. Tim
is the cotton from the USA or another country?
The only thing I can answer for is that the towel are made in the USA, where the cotton is grown I don´t know and i can´t find any information about that either...
is the cotton from the USA or another country?
Made in the USA with cotton from Africa (fair trade model)http://www.1888mills.com/MadeInUSA.htmlMade of 100-percent African cotton sourced from the Cotton Made in Africa projectSales contribute to poverty reduction for more than 265,000 African farmers
is the cotton from the USA or another country?
It says "100% Organic Cotton" and "Made in the USA" on the labels, so I believe so.
I just got a Verismo for Christmas and was looking for a pod holder,I like the nifty nespresso carousel but I'm not sure if my pods are going to fit.
Yes, it will hold Nespresso pods, but not other brands. Really a great way to store coffee pods neatly. Note the pods are different for pre 2010 Nespresso machines, so it may or may not work for them.
I just got a Verismo for Christmas and was looking for a pod holder,I like the nifty nespresso carousel but I'm not sure if my pods are going to fit.
If the Verismo pods are the size of the Keurig pods, then they won't fit. The Nespresso pods are smaller.
I just got a Verismo for Christmas and was looking for a pod holder,I like the nifty nespresso carousel but I'm not sure if my pods are going to fit.
Hello,All the pods made by Nespresso are the same, therefore, if your machine is made by Nespresso, this pod holder would work. Verismo is made by Starbucks and it's pretty new on the market. Not sure they have it yet. I have the Nespresso Pixie. I also bought this pod carousel at amazon.com and it works wonderfully. What I would do is find somebody who has a Nespresso machine and compare the pods. Good luck!
I just got a Verismo for Christmas and was looking for a pod holder,I like the nifty nespresso carousel but I'm not sure if my pods are going to fit.
Hi, Mykal! I'm not sure either, but here are some measurements for the Nespresso pods: 1-1/2" in circumference at the top, which would be the critical measurement, and about 1-1/8" from top to bottom. The individual round slots on the carousel are situated 1/4" apart. Hope this helps!
I just got a Verismo for Christmas and was looking for a pod holder,I like the nifty nespresso carousel but I'm not sure if my pods are going to fit.
Hi there, a friend just bought the verismo so I took one of their pod cups & it does not fit on this carousel. Sorry but I hope that answers your question.
I just got a Verismo for Christmas and was looking for a pod holder,I like the nifty nespresso carousel but I'm not sure if my pods are going to fit.
It holds my Nespresso capsules perfectly--in fact, that is what it is made for. I do not know what a Verismo is nor what "pods" you refer to. I have a Nespresso machine that uses only the Nespresso capsules. Sorry, that's the best I can tell you.
Will this product work in a Toshiba TOSHIBA SATELLITE C855-10M LAPTOP with LCD SCREEN 15.6"?
It is not designed specifically for my Dell R15, I guess this sort of screen has a standard that applies to most 15.6 laptop. So my answer is it should fit your laptop. But I not 100% sure, I suggest u buy from sellers who support free return.
How many boxes does it have?
It's one box made of very durable plastic- has many sections inside... Slide in partitions allow you to create how big your sections ars... Very nice container.
Does the Cappuccino finish look like a cherry color at all? What is the actual color of the fabric on the chairs?
The fabric gives a predominant neutral beige but up close the tweed pattern has a shade of moss green (light) and two shades of beige. I could take a picture up close and email you if you'd like. The table top is what I would call a medium walnut (not cherry) and the legs of table and chairs are an espresso (almost black) with a bit of distressed wood look (colour shining through is the same as table top). Sorry it's hard to describe... Hope this helps?
Does the Cappuccino finish look like a cherry color at all? What is the actual color of the fabric on the chairs?
Mandy H described the chairs perfectly and I agree cherry does not describe the table.
Does the Cappuccino finish look like a cherry color at all? What is the actual color of the fabric on the chairs?
The table is a deep ebony/cappuccino except for the top of the table, it is in the amaretto family. chairs color is a neutral color, the color is hard to explain . Its like a woven pattern.
Does the Cappuccino finish look like a cherry color at all? What is the actual color of the fabric on the chairs?
Table top is closer to walnut, but looks fine with my cherry cabinets, base is black. Chairs are beige tweed.
Does the Cappuccino finish look like a cherry color at all? What is the actual color of the fabric on the chairs?
The cappuccino has a red tone in the sunlight. The fabric on the chairs is soft sage green and tan intertwined.
Does the Cappuccino finish look like a cherry color at all? What is the actual color of the fabric on the chairs?
The wood is closer to black than cherry, although there are a few distressed areas where reddish wood shows through. The fabric is very neutral; gives the overall impression of a gold hue. Caution that the fabric on one of our chairs has started to split along one of the weave lines. It's less than a year old and it doesn't get daily use - sometimes not even weekly use!
what is the dimensions and how much weight will it hold?
Don't remember the dimensions but my husband weighs 230 and always sitting on it. It holds up pretty good. Love the chair.
The fungus was nearly gone now there's a black spot under the nail. Will this product get rid of the spot presumably caused by the fungus?
This has happened to me too. If you file the top of the nail the spot may disappear, but I'd still apply product every week. I've had this happen too but I would say if this doesn't take care of i would see a dr. The fungus really never goes away but the best we can hope for is to keep it under control. Good luck!
Why do 8 out of the 10 pictures at the top of the page show it to be Cookies N' Cream when it is advertised as Strawberry? Is it indeed Strawberry?
That's really weird. when I ordered it the pictures were all of the cookies and cream flavor, which is what I ordered and recieved. Maybe they ran out and are selling strawberry now? Sorry wish I knew.
Why do 8 out of the 10 pictures at the top of the page show it to be Cookies N' Cream when it is advertised as Strawberry? Is it indeed Strawberry?
It's cookies and cream. I give it to my son, He likes it & says it tastes great!
Why do 8 out of the 10 pictures at the top of the page show it to be Cookies N' Cream when it is advertised as Strawberry? Is it indeed Strawberry?
It is definitely cookies & cream (meaning oreos-chocolate) flavor. Tastes good.
Does the NP-F770 battery work with this camera? The camera's supplied battery life is short.
Which camera? I didn't see a name listed. I am using it with the Sony FS700 and it works, although you don't get an accurate battery life reading in either the camera or the charger. The charger does indicate when the battery is full, but it does not show the charging process. I use it with the Odyssey 7Q RAW recorder and it works perfect with that since the 7Q indicated battery life with Voltage instead of a fancy bar graphic. I don't use it much with the camera, mostly just for the 7Q recorder and it works fine for that.
Does the NP-F770 battery work with this camera? The camera's supplied battery life is short.
Not knowing, which camera you're talking about, all I can say is that it works just fine with my Sony HDR-PJ790V camcorder. The camcorder reported the battery life on the LCD screen as more than 6 hours the last time I used it.
Does the saucer have a 'rolled' edge? In other words, can spiders find a nice area to hide under the edge, or is it solid?
Yes, the edge is rolled. There would be room for bugs to hide, but so far I haven't found that to be a problem, and I've been using my saucers for over a year. One of them is on the ground, filled with water for the rabbits, squirrels, and coyotes, but it hasn't collected any hiding spiders.
Hi I just the bought the bars but what about the rest ? Where can I get the rest of the stuff ? Thanks for your help
We bought the wood at Home Depot. Any hardware store should be able to help you. These are really awesome monkey bars!
Hi I just the bought the bars but what about the rest ? Where can I get the rest of the stuff ? Thanks for your help
The wood, screws and bolts are at the home Depot, Lowe's or other hardware store.
Can I attach a wand and a shag carpet rake?
I used my old Rainbow wand(not the beater bar) with an attachment for cleaning hard floors. It did not fit snugly so I had used tape to keep the suction strong-worked well(but I am getting some kind of rubber gasket to make it easier). I am not sure of your purpose- to bring up the nap while using suction? This model is small but the power and suction is every bit as good as a Dyson(even a friend of mine with a Dyson said as much after using it), so maybe use the rake on the carpet first and then just vacuum as you usually would? It's a great little vacuum, just needs to be emptied sooner than larger models. I used my old Rainbow wand(not the beater bar) with an attachment for cleaning hard floors. It did not fit snugly so I had used tape to keep the suction strong-worked well(but I am getting some kind of rubber gasket to make it easier). I am not sure of your purpose- to bring up the nap while using suction? This model is small but the power and suction is every bit as good as a Dyson(even a friend of mine with a Dyson said as much after using it), so maybe use the rake on the carpet first and then just vacuum as you usually would? It's a great little vacuum, just needs to be emptied sooner... » Read More I used my old Rainbow wand(not the beater bar) with an attachment for cleaning hard floors. It did not fit snugly so I had used tape to keep the suction strong-worked well(but I am getting some kind of rubber gasket to make it easier). I am not sure of your purpose- to bring up the nap while using suction? This model is small but the power and suction is every bit as good as a Dyson(even a friend of mine with a Dyson said as much after using it), so maybe use the rake on the carpet first and then just vacuum as you usually would? It's a great little vacuum, just needs to be emptied sooner than larger models. « Show Less
Can I attach a wand and a shag carpet rake?
I used my old Rainbow wand(not the beater bar) with an attachment for cleaning hard floors. It did not fit snugly so I had used tape to keep the suction strong-worked well(but I am getting some kind of rubber gasket to make it easier). I am not sure of your purpose- to bring up the nap while using suction? This model is small but the power and suction is every bit as good as a Dyson(even a friend of mine with a Dyson said as much after using it), so maybe use the rake on the carpet first and then just vacuum as you usually would? It's a great little vacuum, just needs to be emptied sooner than larger models.
Can I attach a wand and a shag carpet rake?
The hose has a nozzle on the end, so you can attach whatever you want if you can make it fit (as others have said). Just be sure to switch from "floor" to "hose" with the big dial at the base of the handle.
Can I attach a wand and a shag carpet rake?
I wish I had more information with your question. I imagine you could connect any sort of wand to the end of the hose provided the wand iis the right diameter. If your intent is to attach a carpet rake to the end of the wand, I do not see why this would not work. It all boild down to whether you can get the wand to mate with the end of the hose. Now, all that said, I can't imagine this vacuum being all that ergonomic used in this configuration. I hope that helps.
Pardon my entry level tuning lack of knowledge but are there instructions for this?There were none included in the box.
I received instructions from the seller via email prior to delivery. Contact them I am sure that they would be more than happy to send them to you. It's very simple to use.
Pardon my entry level tuning lack of knowledge but are there instructions for this?There were none included in the box.
Hello, from Tuner On Guitar,Every unit should come with a user manual included. I'm sorry if this was missing. Please check out our blog where you will find the instructions.Best regardsTuner On Guitar
Pardon my entry level tuning lack of knowledge but are there instructions for this?There were none included in the box.
Yes there were instructions included also extra warranty items and website to register the tuner
Pardon my entry level tuning lack of knowledge but are there instructions for this?There were none included in the box.
The easiest thing to do is got to youtube and look up how to tune a guitar. I found several there that teach you how to tune a guitar. A few years ago i bought a guitar and never touched it. I bought a new guitar a few months ago and had to learn myself how to tune and use a tuner. This tuner is very simple and easy once you learn your string notes. Definatly check youtube if your learning a guitar that what im doin.
Pardon my entry level tuning lack of knowledge but are there instructions for this?There were none included in the box.
My husband ordered this and told me he really didn't find any instructions either.
is the powerdriver included with the inks? or how can I get it?
Boy, I really dont think so, but check with sawgrass.com They support the product and can answer any questions.
Does this fit on a DLC-2009CHB 9cup?
I was asked a similar question and directed the person to contact Cuisinart Customer Service. They did and received an answer.
Does this monitor come with a power cable and cable to connect to a laptop?
It does come with a Power Cable and a VGA cable to connect to your computer. You'll have to check because not all laptops have a VGA port.
How much clearance do you have from the top rack to the ceiling and the bottom rack to the top rack/sprayer? I know many of these won't work with 10".
Top rack will allow at least 6" or more. The bottom rack will allow about 12". My plates are 10" and I have no problem with sprayer arm moving.
what are the dimensions of the bag? How much weight can it carry. I want it for traveling with my CPAP machine.
if it carries a couple of half gallons of milk I think it might carry your machine. not the sturdiest item on the road, however considering the price, not bad either.
what are the dimensions of the bag? How much weight can it carry. I want it for traveling with my CPAP machine.
Carry light stuff only!!! Mine broke when shopping in NYC and I had it really loaded up. I left it there, so I wouldn't buy it again.
what are the dimensions of the bag? How much weight can it carry. I want it for traveling with my CPAP machine.
When fully opened, the bag measures approximately 21 inches high, 12 1/2 inches wide and 6 1/2 inches thick, not counting the wheels. The wheels in place add about 3 1/2 inches to the height. For easy carrying, the bag folds down to 12 1/2 inches by 8 inches by 1 1/2 inches thick.I don't know what a CPAP machine is. I use the bag for groceries, including relatively heavy items such as gallons of milk and 8-pound bags of oranges. My guess is that I'm usually transporting from 20 to 30 pounds.The bag is very handy, and extremely durable. Sturdy handles make it easy to lift up onto steps or over sidewalk curbs. When fully opened, the bag measures approximately 21 inches high, 12 1/2 inches wide and 6 1/2 inches thick, not counting the wheels. The wheels in place add about 3 1/2 inches to the height. For easy carrying, the bag folds down to 12 1/2 inches by 8 inches by 1 1/2 inches thick.I don't know what a CPAP machine is. I use the bag for groceries, including relatively heavy items such as gallons of milk and 8-pound bags of oranges. My guess is that I'm usually transporting from 20 to 30 pounds.The bag is very handy, and extremely durable. Sturdy handles make it easy to lift up onto... » Read More When fully opened, the bag measures approximately 21 inches high, 12 1/2 inches wide and 6 1/2 inches thick, not counting the wheels. The wheels in place add about 3 1/2 inches to the height. For easy carrying, the bag folds down to 12 1/2 inches by 8 inches by 1 1/2 inches thick.I don't know what a CPAP machine is. I use the bag for groceries, including relatively heavy items such as gallons of milk and 8-pound bags of oranges. My guess is that I'm usually transporting from 20 to 30 pounds.The bag is very handy, and extremely durable. Sturdy handles make it easy to lift up onto steps or over sidewalk curbs. « Show Less
what are the dimensions of the bag? How much weight can it carry. I want it for traveling with my CPAP machine.
Regular less of the size. I would not purchase this item. The wheels are very thing plastic and made very poorly. I would guess it's about 12 inches by 6 inches
Can the motion sensor be disabled?
Yes, but it's buried in the 8 pages of instructions with very tiny print, and to get to the point where you disable the motion sensor, you have to go through a long sequence of setting other options. I did it once, but after a power outage reset the unit and the motion sensor defaulted back to ON, I disconnected the unit and put it in a drawer. I don't anticipate using it again.
Can the motion sensor be disabled?
Yes - the instructions are not clear, but hold down the Meter button for 3-4 seconds and you get to a series of options to turn the PIR off, and also to disable the standby-off by setting the power level (watts) down to 0 (zero). Too bad they did not make this easier (and more obvious) to do. As I write in my review - unit is great, instruction manual is awful, and user interface is awkward.
I am 5'1" female. Will I be able to put this up by myself? I often go camping alone and will have to set this up by myself.
I believe so. It can be tackled on corner at a time then raised one corner at a time. The trickiest part would be the extra awning piece but I think it would work! It's a great canopy. Have fun!
I am 5'1" female. Will I be able to put this up by myself? I often go camping alone and will have to set this up by myself.
I would get a regular canopy with a side wall. This is super heavy. You definitely could do it, but I wouldn't
I am 5'1" female. Will I be able to put this up by myself? I often go camping alone and will have to set this up by myself.
It's possible. It's really best to have two people to pull on opposite poles, but once you get it stretched out, lifting the top up isn't difficult. It's pretty heavy all in the carrying case, though.
I am 5'1" female. Will I be able to put this up by myself? I often go camping alone and will have to set this up by myself.
It would be possible, but quite difficult-it is cumbersome and tall. I'm 5 feet and need assistance
the bag with frame or with out frame
Without. It had some cheap plastic clips to attach it. The thing is garbage
There are lot of wrinkles on the muslin backdrops how can remove the wrinkles. Should I iron?
Using a hand steamer while the backdrop is hanging will likely do a better job. However, with your subject not too close to the backdrop, and your lighting on the subject and not the backdrop (as it should be), you really don't have to worry about wrinkles. Wrinkles will not be visible on a correctly lit photograph.
There are lot of wrinkles on the muslin backdrops how can remove the wrinkles. Should I iron?
I don't know how to iron, and this thing is way too big. I got a steamer and worked my way slowly, it got a lot better, and I left it mounted for a while it removed most of it. Good luck.
There are lot of wrinkles on the muslin backdrops how can remove the wrinkles. Should I iron?
I've had the same experience. I attempted to use a steamer without much improvement. I would not use an iron because you can actually scortch the fabric. I have only the black and white muslims and Photoshop any visible wrinkles out which are very little that are visible. I'm not sure how you are using the black or white but I use it for high key and low key effects so actual background showing is limited. Hope that was helpful.
There are lot of wrinkles on the muslin backdrops how can remove the wrinkles. Should I iron?
Ooooo I usually spray (not steam) my backdrop with water once I get it up and I instantly start seeing the wrinkles smooth out. You would want to do this at least a 30min to a hour before your shoot to give it an ample amount of time to dry before you start shooting though. Once dry - it's perfect!
IS DIGITAL TUNING INCLUDED?
Yes, the TV has an ATSC (digital) tuner, as all new TV's do. It will also tune in standard channels if they are available.
can the memory be upgraded to 8gb or bigger manually by ourselves?
yes you can do that its pretty simple . all you need to find out your ram model . that you can call to customer care and asked them .then by online same memory and install it.
can the memory be upgraded to 8gb or bigger manually by ourselves?
That's a great question. Sadly, I rarely use a laptop long enough to expand the memory myself. I would imagine you can expand the memory like most laptops but I don't want to say it's for certain. I wish I could be more help. Currently, I do like the computer and it's working well!
will olympus fl-lm1 flash work on a cannon camera
Absolutely not. It doesn't use the hot shoe to communicate to the camera, it uses a proprietary connector below the hot shoe, you can see it in the photo. Because of the geometry of this additional connection, you cannot physically slide it onto a anything other than the cameras it is designed for, and if you could, it still wouldn't flash.
will this paper work on star tsp650
Yes, this is thermal paper so is will work with the TSP650. Just be aware that thermal printers and paper do not work well in high heat enviroments like kitchens.
will this work the Behringer Ultra microphones XM1800S ?
While I don't have the Ultravoice XM1800S, I do have the similar XM8500, and yes, this cable will work to connect that mic to a 1/4" TS input jack say in a mixing board or Karaoke machine. This should work for any dynamic mic with an XLR connection. This will NOT work with a condenser mic that requires phantom power as it will not carry the power signal to the mic... (So don't try to hook up a C-1 or C-3 with this!)
will this work the Behringer Ultra microphones XM1800S ?
All microphone with standard XLR connector will work. Yes it should work for the XM1800S.
will this work the Behringer Ultra microphones XM1800S ?
Yes it will, as long as your input to your PA system is 1/4 inchMicrophones have and XLR connection, which is normally connected to an XLR connection at the other end. If you don't have an XLR (3 pin) connection at the other end, and it is a 1/4 inch connector at the input of your mixer or PA then this will work fine.
will this work wuith the Ruger MK 1 (thumb button on the right side of the magazine)?
no not as it comes from mcfaden but with a minor modification it will work. http://www.mcfaden.com/v/pdf/willitworkformypistol.pdf
does it come in any specific flavor? (such as vanilla or chocolate) also can you taste it in the smoothies?
I returned this product because it I couldn't tolerate the taste. No matter how much fruit was added, it still had a chalky, awful taste. Not sure about other flavors but this one was vanilla and I would not recommend it.
does it come in any specific flavor? (such as vanilla or chocolate) also can you taste it in the smoothies?
I don't know I'd it comes in any other flavors. You can definitely taste it.
How are the mirrors attached to the doors? Two-side tape or glue?
It is a beautiful cabinet. Remove mirrors before installing. They remove easily by pressing on tabs on each hinge
How are the mirrors attached to the doors? Two-side tape or glue?
This mirror is very well made, and the mirrors are glued on both sides of the doors.It is a beautiful medicine cabinet. We just put it up yesterday, as we are remodeling our bathroom.It takes two people to put up, as it is quite heavy. We love it! :o)
How are the mirrors attached to the doors? Two-side tape or glue?
This mirror is very well made, and the mirrors are glued on both sides of the doors. It is a beautiful medicine cabinet. We just put it up yesterday, as we are remodeling our bathroom. It takes two people to put up, as it is quite heavy. We love it! :o)
How the filter works
You have to have a Braun coffee pot with the filter well in the bottom of the water tank. The filter is just inserted into the well. It is simply activated charcoal that filters the water and makes really good coffee. I change mine about every 4 to six months but that would depend on your water.
How the filter works
Not sure if you mean how is the quality or how does it physically work?The quality is excellent and makes a big difference in how the coffee tastes but that really depends on your water source.The filter fits into a specific spot on your coffee maker and not all of them have the place for a filter (at the bottom of the water reservoir).
How the filter works
The filter only works for those coffee makers that are made for it, like my Braun coffee pot with the filter well in the bottom of the water tank. The filter is just inserted into the well. It is simply activated charcoal that filters the water and makes really good coffee. I change it every few months and it does make a difference in the coffee taste. Hope this is of help...
Does this router support community builds of DD-WRT? Is there any difference with the DD-WRT supplied by Buffalo and the community builds?
Yes. The latest build is 06-23-2014-r24461 and is available on dd-wrt's site under other downloads. Downloads others eko BrainSlayer-V24-preSP2 2014 06-23-2014-r24461 buffalo_wzr-300hp
Does anyone know if these are lead free? Thank you
I'm no expert, but I believe that most clear glass products, which these are, are lead free. The only exception I know of is products known as "lead crystal," and that is labeled as such and is usually very expensive. Lead crystal is decorative crystal and not usually found in products such as mugs. If they did have lead, they would have to be labeled as such to be sold in California. That is my best guess.
Is it compatible with the HP ENVY dv7-7230us? Qualcomm Atheros AR9485 802.11b/g/n?
Most wireless cards in laptops use the mini pci-e interface, which this one does. There are two variants, half height and full height. If it is half height you will need an extension to reach the fastener screw locations. The best course of action for you, would be to open your laptop and see what you have inside (I did a quick google search and found no useful information, you can probably find more if you dig a little). On most laptops I have done, the wireless card is RELATIVELY easy to access. There is generally a few panels on the bottom and this is usually inside one of them.
Is it compatible with the HP ENVY dv7-7230us? Qualcomm Atheros AR9485 802.11b/g/n?
I can not say for certain if it will work, but I can tell you for a few dollars more that this does Intel Network 6235AN.HMWWB Centrino WiFi Card Advanced-N 6235 Dual Band Bluetooth. But for $7.00 you can't really go wrong.
Is it compatible with the HP ENVY dv7-7230us? Qualcomm Atheros AR9485 802.11b/g/n?
I replaced an Atheros AR5B95-H from an HP DV6, and it was plug-n-play. As long as your old card is a mini PCI-e, it should be fine.
Is it compatible with the HP ENVY dv7-7230us? Qualcomm Atheros AR9485 802.11b/g/n?
It's more of a question of if it's compatible with the operating system that laptop uses. There's no reason it shouldn't work with just about any laptop, but make sure drivers are available for the (Windows?) operating system your laptop uses. It's a tossup of whether or not your laptop takes a half or full-sized card, so it's best to get the half-to-full adapter for it at the same time. They're very cheap. I should've ordered one as well, but instead held it in place with electrical tape -- something you won't need to worry about if you order the adapter at the same time. :)
Is it compatible with the HP ENVY dv7-7230us? Qualcomm Atheros AR9485 802.11b/g/n?
I can only tell you this. If the pin arrangement and size of the board are the same it should work. You have two antennas to consider and may have to purchase another separately to install if you don't have the 5GHz on your existing card. Consider getting a card with Bluetooth included.
does it work with king sized sheets
It absolutely does. I have some chocolate microfiber ones on them right now and they fit nicely.
How well do games play on the excite? speed? I am strickly buying this tablet to play games.
It is an see model therefor it is as good as newer Toshiba such as the encore2 or Samsung product. It was excellentIn its day but if you are looking for speed etc. the newer models would be better.
How well do games play on the excite? speed? I am strickly buying this tablet to play games.
I am not the best gamer but this tablet runs fine with games. Speed is good. It runs fast and I have never experience slowness since i bought it.
How well do games play on the excite? speed? I am strickly buying this tablet to play games.
My kid plays clash of clans an says its great for games I play candy crush and have no problems. Have two of these tablets an love them for years. Not sure about heavier games never played them hope this helps.
How well do games play on the excite? speed? I am strickly buying this tablet to play games.
I downloaded Candy Crush on the tablet, but would it froze a lot. I have had no issues with other games. Hope this helps.
Are these drafty on cold days? How is the moisture situation?
If the solar tubes are installed correctly, there are no drafts and there is no moisture. Be sure that your installer is experienced, detail oriented, and offers a warranty.
Are these drafty on cold days? How is the moisture situation?
Dry, seal, giving lots of light......just go for it.It´s worth every penny you send
Are these drafty on cold days? How is the moisture situation?
Not drafty at all. You need to make sure you seal it properly with aluminium hvac tape and put some fiber glass insulation around it. It comes with some of this hvac tape but you may need more. I did not have any issues with moisture and I have it installed in my bath room. Love it. It gives so much natural light. Probably comparable to 150W bulb.