query
stringlengths 20
2.05k
| answer
stringlengths 75
2.05k
|
|---|---|
I was wondering if this printer has a limit to how long prints can be? I want to make prints that are around 60 inches long.
|
I personally don't use roll paper so I don't remember if this printer has the option to attach a paper roll. That info should be somewhere in the specs for the printer. The width limit on it is 17" ... the largest sheet paper it will print is 17" x 25". Check the specs ... any limitation on printing should be specified.
|
I was wondering if this printer has a limit to how long prints can be? I want to make prints that are around 60 inches long.
|
The answers previously provided only tell half the story. While Epson predefines standard paper sizes in the driver, the true maximum length using a custom paper size is 37.5". In other words; To print anything longer than 22" you will need to set a custom paper size. This is how you print 17"x25" or 16"x24" on a 3880. If you still wish to go longer than 37.5", you will need 3rd party RIP software and figure out a way to feed cut roll paper into the printer without creasing, kinking or mutilating it.
|
I was wondering if this printer has a limit to how long prints can be? I want to make prints that are around 60 inches long.
|
It does not accept photo paper rolls, only cut sheets. I believe that 17X22 is the max.
|
I was wondering if this printer has a limit to how long prints can be? I want to make prints that are around 60 inches long.
|
The Epson 3880 will only use cut-sheet paper and not rolls. The maximum paper size for this printer is 23.4 x 16.5 in (A2)
|
CAn you print on both front and back?
|
Yes . I actually printed both sides when making some appointment cards for a Free Health Clinic I support.
|
If I can copy two sided 8.5 x 14 on the Brother MFC J6920, why can't I print two sides?
|
I print two sided all the time. It does a fine job. You should be able to print two sided on all sizes of paper the printer will take. I do it on 8.5 x 11 and 11 x 17. I have not tried 8.5 x 14 but can see not reason it would not work.
|
Can it fit an iPod touch 4th gen
|
The girl I bought it for said she puts her iPod in it, which is the same size as an iPhone 4. Also, the research I did before I bought it said it can fit all iPhones. Hope this helps!
|
will it harm a marble floor
|
My floors are travertine so I can't really answer. With marble it would depend on the finish that was applied to the surface. It was a miracle on my grout... The stuff is cheap order a bottle and do a test. Get a good grout brush, elbow grease is required!
|
will it harm a marble floor
|
I didn't use it for that purpose, but I doubt it, as it's very weak, in my opinion!
|
will it harm a marble floor
|
I don't think so, I used it on my ceramic tile without any problems. It's got a soapy slick feel to it I which is easy to rinse off with warm water.
|
will it harm a marble floor
|
I don't have a marble floor, but it works great on my ceramic tile, so given that marble is much harder, I think it would be fine.
|
I am a size 34C and 1-4 in pants. From the reviews I couldn't tell whether it was better for me to get a Medium or a Large. Any suggestions?
|
Definitely go with a medium, I wear a size 00 in pants, and the bottoms were pretty big on me, every time I wore the suit, I had to fold the top part in because they were tall. And I am barely a B cup, and the top was a little big too. So I think a medium would fit you perfect.
|
I am a size 34C and 1-4 in pants. From the reviews I couldn't tell whether it was better for me to get a Medium or a Large. Any suggestions?
|
Its hard, because I orderd a medium the bottoms were to small, and the top was to big.
|
I am a size 34C and 1-4 in pants. From the reviews I couldn't tell whether it was better for me to get a Medium or a Large. Any suggestions?
|
I am about the same size, I bought a medium an it fits well...I have no complaints!
|
I am a size 34C and 1-4 in pants. From the reviews I couldn't tell whether it was better for me to get a Medium or a Large. Any suggestions?
|
I am the same size and I would suggest going with a Medium.. The bottoms are really big on me, but the top fits great!
|
What is the universal accessory mounting bracket mentioned in the description? Where is it located on the stroller?
|
I purchased for my daughter so I'm not sure.all I know is she loves it and has nothing but good things to say about it.
|
What is the universal accessory mounting bracket mentioned in the description? Where is it located on the stroller?
|
It is a part of the stroller where you can easily attach accessories like the car seat adaptor or the child tray. Accessories are sold separately and they can be easily mounted with a simple click into the mounting bracket.
|
What are the dimension of the base of the lamp?
|
It's amazingly exact. it's 11X11. Just a suggestion, tho if ever you're gonna buy this fixture, I highly recommend if you'll use this bulb. For me, it's one of the best I've purchased because the light output, durability, and its efficiency are impeccable. Also, the color of the light and the shade blends well. Hope it helps (Pack of 4) G25 LED Bulb 6W, Warm white, 3000K, 40W Globe Bulb Incandescent Replacement, clear Cover, Dimmable, UL Listed, Energy star certified,
|
Hi, i have a question, i have a Camaro 69 with 350 motor original, if i buy this carb i need to do any modification to the motor to work well?
|
That carb works best on that SBC. However.. The work is in the carb itself. Casting flash inside metering blocks. Verify jet sizes. Secondary blades 1mm open. Not a square. Choke can needs to be shaved down to idle lower then 1,500 to 1600 with initial start to low. Verify float height and double check base for warpage, 0 backlash on accelerator pump arm. Don't assume. Check n verify. Mine runs great after I did all that. Good luck on your project! Larry
|
Hi, i have a question, i have a Camaro 69 with 350 motor original, if i buy this carb i need to do any modification to the motor to work well?
|
That carb works best on that SBC. However..The work is in the carb itself. Casting flash inside metering blocks.Verify jet sizes.Secondary blades 1mm open. Not a square.Choke can needs to be shaved down to idle lower then 1,500 to 1600 with initial start to low.Verify float height and double check base for warpage, 0 backlash on accelerator pump arm.Don't assume. Check n verify.Mine runs great after I did all that.Good luck on your project!Larry
|
Hi, i have a question, i have a Camaro 69 with 350 motor original, if i buy this carb i need to do any modification to the motor to work well?
|
Check that the bolt pattern is the same and then the linkage. Do you have an electric choke now? If not you will need to run a 12 volt wire to the choke. The carb looks and works great.
|
Hi, i have a question, i have a Camaro 69 with 350 motor original, if i buy this carb i need to do any modification to the motor to work well?
|
That is a little to much carb if your 350 is stock.just my opinion with 50 years as a gearhead.U may b better off going with 500 CM max.
|
Hi, i have a question, i have a Camaro 69 with 350 motor original, if i buy this carb i need to do any modification to the motor to work well?
|
If you are going to use on stock or midly modified engines you should not need any mods.
|
Will this work with a SuperSonic SC-603 antenna?
|
I'm sure it will, nice adjustable mount for angled eves or flush, very easy to install
|
Can anyone tell me who the manufacturer is? I would like to investigate the company. Thanks
|
All these lower end generic models are made in China . user instruction are poor and there is no explanation for the 5 mode settings. I'm not convinced that this foot spa does anything that people claim.
|
Can anyone tell me who the manufacturer is? I would like to investigate the company. Thanks
|
To Sanjay...the Mode settings at the top of the unit apply to the body wrap heat belt option, not the foot bath.
|
Can anyone tell me who the manufacturer is? I would like to investigate the company. Thanks
|
Yes. The Cell Spa is a QLive Foot Bath by Sinaina Resources, according to the Disclaimer and Warning language printed on the label on the underside of the unit. The one I received is either the QLive Model 8801 or 8802.
|
Does anyone out there have the 75inch Samsung UN75F6400, I would like to see a review on that, seems like all the review I read was 40-55inch
|
This is an amazing TV and it is the second one I purchase. The picture quality is great but it is a lot better if you calibrate the TV. The TV is great for bright rooms and looks great from every angle. I have got lots of compliments on it. Stay away of the voice control it's not worth your time, in my opinion. Also, it is surprisingly light so two people can easily mount it on the wall. As Brian below said the 3D is unbelievable.
|
Does Amazon.com LLC not support the Troops? With over 150,000 military member serving in Europe and Asia, it would be worth mailing to APO/FPO
|
Amazon do shipped to APO/FPO however, there are seller who don't. Some items cannot be shipped to APO, FPO, or DPO addresses.An error message will appear at checkout if you enter an APO, FPO, or DPO address and the item isn't eligible to be shipped to that address.
|
Is this compatable with a vista?
|
Yes.. it should be.. the driver disk will come with Drivers for XP, Vista, Win 7 and Win 8
|
Anyone have experience using the optical viewfinder with this camera?
|
Yes, I do. But what's the question? Do you know that you can fine-tune the focus on your viewfinder to accommodate your own eye's imperfection.. there's a tiny glider on the EVF which you can slide back and forth... until you have perfect focus in the EVF for YOUR own vision. Is THAT the question?
|
Will this work on Sony DSC-T10 ?
|
Hi Naoko, Sony Memory Stick ProDuo M2 16GB is not compatible on the Sony DSCT10 Camera. -Vincent
|
Will this work on Sony DSC-T10 ?
|
It probably does. Basically Sony cameras are going to work with the memory stick. I have a 21MP camera and the 4G only holds 508 photos according to the chip. I have an old 7MP camera which can use the same stick.
|
What are the 2 mattress position heights? I'm trying to match the height close to the height of my bed to use the crib as an attached side sleeper.
|
My crib has 3 possible heights for the mattress. The mattress support sits at approximately 14", 19" or 24" from the ground with wheels on 13", 18" or 23" without the wheels. These measurements do not include the thickness of the mattress. It is difficult to measure because the bracket that supports the mattress brings the mattress about 3" lower than the holes that it screws in to. I hope this helps. From the bottom of the leg (no wheel) to the bottom border is 12"
|
How do I get one of the lifetime replacements? I purchased this a few months ago, and recently had to remove my shield because of a noticeable scratch on the screen protector.
|
Hello Joleen Valerie, The warranty is offered and handled by ArmorSuit. It is a simple process. Simply go to the following link for the Lifetime Replacement Warranty instructions: http://www.armorsuit.com/warranty/. If you have any questions please contact us through "Contact Seller" link via Amazon. Have a nice day. iTech Accessory
|
what size filters does this litter pan take
|
It is 6.25"x 6", I found a universal fit filter at walmart and it fits perfectly.
|
Will it fit a side mount on a JC Suntoon?
|
Hi Marion, It fits the standard fitting on my Triton bass boat. I had to change the polarity (switch wires) for the light to work, but simple to do. Hope this helps.
|
can you measure torque in both directions?
|
Since there have been conflicting answers, I'll link to the owner's manual: http://www.tektontools.com/PRODUCT_MANUALS/MANUALS_2000/24320_manual.pdf. It states clearly that the torque measurement only works in one direction.
|
can you measure torque in both directions?
|
sorry for the slow reply and my answer isn't going to help because I apparently miss placed my torque wrench but I think you can measure in both directions? I used it to torque gas keys on my ar and scope mounts I was very pleased with the wrench.
|
Hi,,,I would like to know how to install it to use with the tvpad?.
|
Plug it into an open USB port, as then it should begin receiving WIFI signals. I am not sure what a "TVPAD" is, but if it is anything that can receive WIFI, then this little USB WIFI receiver is a great solution!
|
Hi,,,I would like to know how to install it to use with the tvpad?.
|
What version of tvpad do you have? from what I've read, they have built in wifi since tvpad 2 in 2012. Tvpad 3 got terrible reviews. Tvpad with built in wifi should connect to a wireless router. Where do you want to connect/install the Panda? If you're trying to use the Panda, installed on computer, to connect with the tvpad, I do not think that will work. The Panda is to make a laptop and/or desktop wifi, to connect to a wifi router.
|
More Zoom needed: How can I obtain more zoom for soccer pictures?
|
wow... you're using the 75-300 and need more zoom? First try cropping your pictures and see if you can still get decent results... otherwise you're going to have to get better lenses which aren't going to be cheap.
|
Is this an IPS monitor? Description was a little elusive on that
|
as i understand an IPS panel does not show tailing or lightening when pressed on with a finger. This panel does not show any signs of either of these issues that would occur on a TN monitor when pressed on. Hope this helps you out.
|
Does the bottle say it is safe for use on puppies?
|
As of now I haven't had any issues. My blue nose pit doesn't seem to have a problem with it. So to answer your question I do believe its safe to use.
|
Does the bottle say it is safe for use on puppies?
|
It worked great for my puppy. Let the puppy get used to the bottle and smell the product first and use only on stains. It takes about 1 to 2 weeks for stains to disappear. There is no product out there that gets rid of tear stains that have been on a dog or cat for months at a time. It usually becomes a permanent stain. You must cut the colored hair off and let new hair grow and continue to bathe your dog and keep stains clean continuously. I feed my dog Stella and Chewy. This food has probiotics that help with the dogs digestive system and contains no dyes or chemicals. Stains and alllergy went away as soon as I fed my dog this food. It is all natural.n Hope this helps. It worked great for my puppy. Let the puppy get used to the bottle and smell the product first and use only on stains. It takes about 1 to 2 weeks for stains to disappear. There is no product out there that gets rid of tear stains that have been on a dog or cat for months at a time. It usually becomes a permanent stain. You must cut the colored hair off and let new hair grow and continue to bathe your dog and keep stains clean continuously. I feed my dog Stella and Chewy. This food has probiotics that help with the dogs digestive system and contains no dyes or chemicals. Stains and alllergy... » Read More It worked great for my puppy. Let the puppy get used to the bottle and smell the product first and use only on stains. It takes about 1 to 2 weeks for stains to disappear. There is no product out there that gets rid of tear stains that have been on a dog or cat for months at a time. It usually becomes a permanent stain. You must cut the colored hair off and let new hair grow and continue to bathe your dog and keep stains clean continuously. I feed my dog Stella and Chewy. This food has probiotics that help with the dogs digestive system and contains no dyes or chemicals. Stains and alllergy went away as soon as I fed my dog this food. It is all natural.n Hope this helps. « Show Less
|
Does the bottle say it is safe for use on puppies?
|
It worked great for my puppy. Let the puppy get used to the bottle and smell the product first and use only on stains. It takes about 1 to 2 weeks for stains to disappear. There is no product out there that gets rid of tear stains that have been on a dog or cat for months at a time. It usually becomes a permanent stain. You must cut the colored hair off and let new hair grow and continue to bathe your dog and keep stains clean continuously. I feed my dog Stella and Chewy. This food has probiotics that help with the dogs digestive system and contains no dyes or chemicals. Stains and alllergy went away as soon as I fed my dog this food. It is all natural.n Hope this helps.
|
Has anyone had problems printing with an HP photosmart printer after post processing with Paintshop Pro x5?
|
What kind of problem? Print quality, size, resolution??? Can you be more specific?
|
Would you Jorafoam composters bear/critter proof?
|
I purchased my Jorafirm over a year ago and have never had a problem. We live in a beach community, so do not have bears, but we do have a few raccoons and opposums. The latch has never been defeated by either animal. But a bear? I really don't know if they are dexterous enough to operate the latch.
|
Would you Jorafoam composters bear/critter proof?
|
Critter proof? Yes. Bear proof? Depends. Can a bear open the doors? Doubtful. Could a bear pick it up and toss it? Yes. You will have flies and other bugs but not opossums or raccoons.
|
Would you Jorafoam composters bear/critter proof?
|
It is all metal and has a secure latch like ones I have seen on bear boxes in national parks. You can add a lock or pin to keep them secure.
|
Would you Jorafoam composters bear/critter proof?
|
Bear--absolutely not! Bears can rip locked car doors off. For opossum and raccoon, you can put a large cotter pin or padlock through the eye of the latch mechanism. I live in Wyoming, where we have lots of bears, even in town, and have a kid that did bear research for a master's thesis, so am somewhat familiar with what will hold up to bears. No, it won't hold up to a bear.
|
Would you Jorafoam composters bear/critter proof?
|
Yes, the Jorafoam is critter proof (dogs, cats, raccoons, squirrels, etc). For the bear, I suppose if the bear was strong and determined enough, it could knock off the composter off the stand, but I doubt it would be able to open the com poster unit. Either way, I believe a bear attack would be unlikely.
|
Do these come with tip and nock insterts already installed, or would one need to buy those separately?
|
The Gold Tip Arrows Come Complete With Incerts However Your Local Bow Shop Will Need To Cut Your Arrows To The Draw Length, I Hope This Answer Helps You Sir.
|
Do these come with tip and nock insterts already installed, or would one need to buy those separately?
|
Come with nocks and inserts but u have to install them. This allows for needs to cut to length.
|
Is this memory ECC or Non-ECC: What specifically is this memory?
|
Just installed - PC recognizes as ECC - on my 8250 it does specify non-ECC - seems to work fine, does it matter?
|
If rubbed on glass is this waterproof? Ie; can be washex or run thru dish washer w/o coming off?
|
I can't say, for sure, but 2 things would make me think so, enough to test it. 1. I've used it on lots of items that get nominally wet. Played with in the rain, fell in the pool... without any problems. Also, it was developed for use on cars. So, I wouldn't do anything precious and valuable first, but I would certainly try it on a dollar store item and put it through the washer. Once used, rubbing only makes it shinier, it doesn't rub off onto a cloth. I would guess it's safe.
|
Does the rosette fit a 1 1/2 gallon galvanized watering can?
|
I have some old antique ones that are probably 2 1/2 gal size and it fits perfectly on all of them. No leaking either
|
Does the rosette fit a 1 1/2 gallon galvanized watering can?
|
Sorry unable to answer, my can was 1 3/4 and did fit. But it was a hassle to first screw on, too much galvanizing material. The originals rosettes were made of brass, much higher quality.
|
I have a Taurus millennium pro pt 145...Will this fit?? Last sight I bought was way too long.
|
upon initial inspection this looks like it will be too big for your Taurus.
|
I have a Taurus millennium pro pt 145...Will this fit?? Last sight I bought was way too long.
|
To be real with you no it will not you need something that will stay still when you shot. Or get a full size pistol a full tac rail if you have feel free to email me @ [email protected]
|
I have a Taurus millennium pro pt 145...Will this fit?? Last sight I bought was way too long.
|
i have used it on my full size glock 40 and my issc 22 sami pistol. The length is OK on these for me but I am not sure what your model looks like. Hope this helps
|
I have just purchased this camera with the kit lens. What would you recommend as a second lens? I am a casual photographer , mainly family, vacations
|
My recommendation would be the 55-200. You can't really go wrong with any of the fuji lenses as a second lens. But the 55-200 gives you a solid two lens combo.
|
I have just purchased this camera with the kit lens. What would you recommend as a second lens? I am a casual photographer , mainly family, vacations
|
I purchased the 56/1.2. What an amazing lens! I have a blast with the portraits now I am able to take. Another great prime lens would be the 23/1.4. I don't have it since I have the X100s as well. My last Fuji lens is the 55-200. Very sharp, well built lens. Took it on an air show and was able to take great, sharp photos on fast moving jets and airplanes. Can't go wrong with it.
|
Received today, but don't have flour yet. When closed there is a slight gap between the plates (I can see light passing through). Is this a problem?
|
I don't think it's a problem. The softness of your dough defines more the thickness of your tortillas. It's a bit more difficult with softer dough but well worth it if you want thinner tortillas. I've been using plastic wrap on both sides of the press which sticks pretty well when you squirt some water on the press before covering it.
|
Received today, but don't have flour yet. When closed there is a slight gap between the plates (I can see light passing through). Is this a problem?
|
I don't think it's a problem - that's where the tortilla goes... :) Maybe if you wanted super-thin tortillas it might be an issue, but it makes 1-2mm thick ones with no problem.
|
Received today, but don't have flour yet. When closed there is a slight gap between the plates (I can see light passing through). Is this a problem?
|
not a problem @ all. tip: place 2 circles of wax paper between each side of press when pressing tort. (1 piece on top and 1 piece on bottom. that way the dough wont stick to the press.
|
what are the total ingredients of the pumpkin peel
|
Pumpkin, vit A, beta carotene, vit E, Calcium, protein, glycolic acud, trichloroacetic acid, lactic acid, fragrance
|
The descriptions says it is usable up to 50 time, are the batteries not replaceable or does the inside's wear out?
|
The material is amazingly soft so adequate lubrication is essential. I could easily see the insides tearing if you tried to go in dry. The unit does not use batteries for sinsation but relies on the amazing internal geometry. Each of the three areas marked by circles can be manually gripped to create pressure points and in the case of the center circle an amazing increase in suction. My wife loves using it on me and gets far rougher than I usually am with it to no ill effect (to the unit)...
|
The descriptions says it is usable up to 50 time, are the batteries not replaceable or does the inside's wear out?
|
Thank you for an inquiry!The battery isn't included in this product. Because this product is soft material, I endure about 50 times of use. Video link of the article introduction in referencehttp://www.tenga.co.jp/products/hole/flip_hole_black.php#prettyPhoto/0/
|
The descriptions says it is usable up to 50 time, are the batteries not replaceable or does the inside's wear out?
|
Some say it can be used more than 50 times, I on the other hand had to throw it out after approximately 50 uses. The material is very thin and will easily develop a hole or start to peel away from the case. So basically if $1.00/nut is okay with you, buy it.
|
The descriptions says it is usable up to 50 time, are the batteries not replaceable or does the inside's wear out?
|
You can definitely use this more than 50 times. Just be careful with it and don't be unnecessarily rough.
|
The descriptions says it is usable up to 50 time, are the batteries not replaceable or does the inside's wear out?
|
This is the energizer bunny. Just keep it lubed up, love the sloppy wet sounds when it's working my junk. Easy to clean and if you play with the slide/lock you can make it looser or tighter for ejaculation. I'm addicted to this item.
|
I want a simple camera one with auto focus. Does this have it?
|
Every digital camera, from $80-800, has autofocus. The question is how well does it work, how long does it take to work, and how well does it work at low light levels.
|
Is this an actual canon battery
|
Yes, it is a genuine Canon battery. It shows the same battery onthe Canon website.
|
Is this an actual canon battery
|
Yes, it is a genuine Canon battery. It shows the same battery on the Canon website.
|
this phone does work in colombia whitout problem of connectivity? and what about the warranty?
|
The phone works perfectly in Colombia. No warranty as it works because I have not had to use
|
this phone does work in colombia whitout problem of connectivity? and what about the warranty?
|
I don't know if it works in Columbia.. It should do. I bought this for use in Bermuda and it works fine on the network. Just stuck a sim card in it and it works.
|
Do the lids on these fit on the NUK Gerber Graduates Advance Hard Spout Sippy Cups? I ordered these, but have the others.
|
These are NUK Gerber Graduates Advance Hard Spout Sippy Cups, so I'm not sure what your question is? Do you mean will they fit on an older design?
|
Can it connect to a macbook?
|
Yes! I actually never have needed to pair it w/my Macbook. However after receiving this question I attempted to pair it to my Mac and did so without any "hickups" :)Hope this helps in your decision making upon purchasing this BT earpiece?
|
What is the difference in models NABIXD-NV10A and NABIXD-NV10B?
|
This review has some of the differences between the two:http://www.androidpolice.com/2013/10/04/fuhu-nabi-xd-32gb-review/I've also heard (in other reviews) that the 32GB version does NOT come with the parental control mode installed.
|
What is the difference in models NABIXD-NV10A and NABIXD-NV10B?
|
Model A is the first model (not many around anymore) and actually has parental controls and a nabi (kid) mode. NO Google Play yet, an update is supposed to be coming. Model B is what you will find out now mostly, it does not have the parental control/kids/nabi mode. It DOES have Google Play. It's almost just like the 32G (NV10C), except it's 16G.
|
What is the difference in models NABIXD-NV10A and NABIXD-NV10B?
|
I have no idea my Nabi was bought as a gift - personally I use a PC maybe after Xmas you can ask my grandnephew??
|
What is the difference in models NABIXD-NV10A and NABIXD-NV10B?
|
This review has some of the differences between the two: http://www.androidpolice.com/2013/10/04/fuhu-nabi-xd-32gb-review/ I've also heard (in other reviews) that the 32GB version does NOT come with the parental control mode installed.
|
What is the difference in models NABIXD-NV10A and NABIXD-NV10B?
|
From what I have seen the only difference is with how much memory is on the NABI XD. However more memory can be added to them with a memory card.
|
Will this rust if you leave it outside year round? Thanks!
|
It hasn't rusted yet. However, we almost always have it covered and we live in California where it never rains any more.
|
Will this rust if you leave it outside year round? Thanks!
|
I usually cover it if it's raining but other than that I have had it a couple years now and just noticed the bowl starting to rust. I think that can be fix though. It is the only part that has rusted.
|
can I run this on a windows 7 or 8 laptop? And can I stream and make videos on xbox 360 for laptop ?
|
Yes it will work, it does have live-streaming capability (although there's some setup involved) and records 360 quite well. I run a laptop as well and as long as it's multi-core and quick, it'll get the job done.
|
can I run this on a windows 7 or 8 laptop? And can I stream and make videos on xbox 360 for laptop ?
|
Yes both OS.Yes. Though depending on how powerful your laptop run and what resolution uouhave the program to record at it can be a little sluggish. If it is then your laptop isnt good enough and youll have to record at a lower resolution.
|
can I buy regular old kicker CVRs or comps, or do I have to buy shallow mounts? 2005 F -150 super crew. Also how difficult is it to lift seats?
|
You'll need to buy shallow mounts, and the box sits nicely on the floor. When you put the seats down it holds the box tightly. No need to modify anything. Stuff the box with pollyfill for best result.
|
can I buy regular old kicker CVRs or comps, or do I have to buy shallow mounts? 2005 F -150 super crew. Also how difficult is it to lift seats?
|
Shallow...Ill sell you my box if you haven't gotten one yet. Bought it for my kid cuz he had money for system and speakers...he spent the money and never mounted the box.
|
dos it stay cool all night
|
Yes, in my experienced it is cool when used. The fill seems to be a consistent temp while sleeping.
|
I get lots of leaves in the pool. Will this device pink them up?
|
I don't think it will. The intake slots are small, and the leaves would probably jam in the intakes.
|
I get lots of leaves in the pool. Will this device pink them up?
|
So far it's done really good at picking most things up, but large leaves get stuck in the intake doors. It does ok with a couple of leaves, but if there was a lot, I would try something else.
|
I get lots of leaves in the pool. Will this device pink them up?
|
If you get the accessory large bag and frame, then yes. The basic filters (there are two) are fairly small. They do great on keeping a relatively clean pool sparkling. But, if you have a lot of leaves from overhanging tree limbs, like we do, then you will need to get the large bag. The small ones will clog quickly. They work, but it will take a lot of cleaning of the filters.
|
I get lots of leaves in the pool. Will this device pink them up?
|
no my dolphin does a terrible job picking up leaves. I am very disappointed so far. I am going to order the accessory leaf bag and hope it works better.
|
Has anyone used this product in cookies?
|
My mom used this to make cookies but I don't have her recipe. Keep in mind that this does have some baking powder mixed in with the powdered vanilla.
|
Has anyone used this product in cookies?
|
I haven't used it in an actual cookie......but I do use it for an Italian version of a linzer torte....I've made it with and without this product and let me just tell you what a difference it made! Really made it light. Depending on the type of cookie you're making, this should make it light as a feather ;)
|
Has anyone used this product in cookies?
|
I have never used it in cookies but I use it in cakes and muffins instead of baking powder and they turn out great!
|
Will a Nobis 9' tablet fit this?
|
Yes i believe so. It fits snug on a 9.2", so it should be just right on 9".
|
Will a Nobis 9' tablet fit this?
|
I'm not sure with the Nobis, I have a SVP 9" and a Nextbook 8" that does fit in it! and it works very well.
|
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.