sentence-transformers/amazon-qa · Datasets at Hugging Face

query stringlengths 20 2.05k	answer stringlengths 75 2.05k
Is it breathable? I don't like to get sweaty.	I only wear it when it's really cold, cause I'm the same way. It does seem "breathable" though. We had a really cold snowy winter last year and I wore it sleigh riding a few times, and I sweat even when it's freezing out. I really do like the coat a lot.
Is it breathable? I don't like to get sweaty.	To date, I have not gotten sweaty in my coat. However, if you're dressed too warmly for the weather, you probably will sweat.
Does this case come with protective flaps or inserts for the USB port and aux input? Like how the Otterbox Defender case does to protect from dust?	Yes, there are attached covers made of the same rubber as the soft part of the case itself.
Does this case come with protective flaps or inserts for the USB port and aux input? Like how the Otterbox Defender case does to protect from dust?	I really like it. It has no face cover but the sides have both hard plastic and rubber and the back is hard plastic and easy pull out for a stand. it has plastic cut coverings for USB port and head phones. Hope this helps.
Does this case come with protective flaps or inserts for the USB port and aux input? Like how the Otterbox Defender case does to protect from dust?	Yes, there are flaps covering the USB & Aux. Input ports. They seem to fit snug enough to limit anything entering.
Does this case come with protective flaps or inserts for the USB port and aux input? Like how the Otterbox Defender case does to protect from dust?	Yes, both the USP port and headphone input ports on the phone are covered by rubber flaps on the case.
How tall are the bed legs? I want a tall bed, with a lot of space underneath.	It's almost 11 inches. I think it's a fair amount of room underneath. I'm a big fan of Room Doctor furniture. I now have three different pieces of their furniture, and each piece is very well built.
How tall are the bed legs? I want a tall bed, with a lot of space underneath.	Not very tall at all. This is not a tall bed. You can fit the underbed boxes or duffles underneath, but that's about it. This is great simple, sturdy, solid wood bed. One of the things I like best about it is that it is relatively close to the floor and easy to get in/out of for short people. I went to a furniture store and all the beds were too tall for me to easily get in and out, without using the little steps. Good luck!
How tall are the bed legs? I want a tall bed, with a lot of space underneath.	About 11 inches. A friend of mine bought 4" table leg extenders from Home Depot for her queen-size bed so she could store some taller items under her bed. She says they are very sturdy and, as long as you aren't jumping on the bed, they won't tip over. However, she is only 5 ft 2" tall and about 127 pounds, so I don't know if the legs are rated for larger individuals, or couples.
How tall are the bed legs? I want a tall bed, with a lot of space underneath.	there is 10.5 inches of clearance between the floor and the bad frame. i like this bed, it's a solid and simple platform bed.
would it fit a laptop with a 17.3" panel?	Well...i honestly dont know.cos it is I don't have such a big computer. But it is a good backpack.i have changed quite a few backpacks and this is the one that lasts...:) I confirmed it.it will not fit
is this backpack good for extended hour hiking trips. im going on a 12 mile hike and it takes about 7 hours round trip.will this be a good liter size?	I've used it in 20+mile day hikes in Nepal, fits a 3 litre camelback and lots of room for whatever you need.
I'm 5' 3" would the short be too short on me?	I'm 5'3 and got a regular medium and they were baggy where I could wear heavy stuff under and be baggy and comfortable. The length was a little long but perfect over ski boots. I'm 125 by the way
This product recommends Microsoft Office 2010 which does NOT have PowerPoint. Any reason I can't buy PowerPoint?	There is no reason why you can't buy PowerPoint and use it on this PC. PowerPoint is a standard Windows application and is completely compatable with all modern PCs running MS Windows. There are several versions of Office, the Professional Version includes PowerPoint or it can be purchased seperately too.
Can't get this device to work. Read and applied recommended display resolutions, and no luck. Help Please!	You have to put it in HDMI-for use as a computer monitor.Other HDMI inputs,won't work.Check your tv,owner manual,on input devices.Another thing is,is that you hook everything up,before you turn on your computer,otherwise it will show wrong format,on your tv screen.
Can't get this device to work. Read and applied recommended display resolutions, and no luck. Help Please!	When you say resolution, you mean the image on the TV? I had to force my computerto the correct one, because it says you have the wrong resolution. Did the computer detect your monitor/TV set?
Can't get this device to work. Read and applied recommended display resolutions, and no luck. Help Please!	I really don't know. Make sure your using the vga cable and hdmi. Play with the laptop screen resolution. Sorry I can't help more.
Arte the switches prewired?	Yes they are prewired with a power and ground wire with spade connectors to hook to
Arte the switches prewired?	High Quality Panel , 1 Hot wire in , Ground wire , ready to go to each Run...
I am looking for something to help with my under eye bags.	I didn't find that it helped with mine, but I have a sodium issue so I am trying to drink lot's of water with lemon but it seems to tighten the skin around the eyes.
I am looking for something to help with my under eye bags.	This works well. I keep in fridge so it is always cold and that enhances the effect. This was suggested by one of the mall guys that I got a sample from. I purchased here for the price!
I am looking for something to help with my under eye bags.	I haven't noticed a big difference yet. I'm still using this product, but unsure if I'll reorder.
Does it support Wifi to stream movies from youtube or computer ?	No. You would need an AppleTV or equivalent to interface from a stream to HDMI
I loved the look of this fixture until someone said that the bulbs are exposed from the bottom. That's a deal breaker. Bother anyone else?	Actually I have this light fixture and yes you have access to change the bulbs from the end, however, the bulbs are not exposed. You have to reach inside to change the bulb. It's really beautiful once installed as a wall light. I wouldn't use it for anything other than a wall light.
I loved the look of this fixture until someone said that the bulbs are exposed from the bottom. That's a deal breaker. Bother anyone else?	If you are hanging these above eye level and decide you want to hug the wall under them maybe it might bother you. Otherwise, these are nice lights and look great in a room.
I loved the look of this fixture until someone said that the bulbs are exposed from the bottom. That's a deal breaker. Bother anyone else?	We have 2 of these on our wall next to the TV. I cannot see the bulbs on either one.
I loved the look of this fixture until someone said that the bulbs are exposed from the bottom. That's a deal breaker. Bother anyone else?	True. If you get down low and look up at the light , you can see the bulb. . Not really a deal breaker. Mine is high in a stairwell. I like it.
I loved the look of this fixture until someone said that the bulbs are exposed from the bottom. That's a deal breaker. Bother anyone else?	Not on mine. Unless your standing under it and you look up. I have two on my back living room wall, on a dimmer too. Love them. Nice size too.
Is the knee rest too long if you have a boot on your foot?	No my husband has to wear a vaco cast pro/achilles boot. It is huge. You can google it and see pics of the boot. My husband loves his knee walker. It is so much safer than crutches. And he does not have sore hands and arm pits from "crutching around" I hope this answers your question.
Is the knee rest too long if you have a boot on your foot?	No, I have worn a boot the last week and a half and it's been fine. If your non weight bearing this is absolutely worth the money. I could still do household chores and function almost normally. I also have crutches and used a couple of times but this is just more stable and I felt so much more "normal" on this then I did crutches. I give this on a scale of 1-10 a 20!!
Is the knee rest too long if you have a boot on your foot?	I bought this originally for my mom who had extensive surgery on her foot and was in a cast and then boot and then walking boot for a period of three months. She used it during all three and loved the ease she had of getting around the house as it still hurt to walk. She gave the scooter to a friend of hers who went through bunion surgery and had a boot on her foot and she loved it too.
Is the knee rest too long if you have a boot on your foot?	No, I had a cast & boot. The cut out seat makes it very comfortable. First walker I had was a long flat seat. Horrible. PT in hospital showed me this one. Medicare doesn't cover. Rental was $150 @ month. Hence the awesome Amazon purchase.
Is the knee rest too long if you have a boot on your foot?	I do not think it is too long, I have a cast half way up to my knee and it works well, I do not use the entire pad, I position my knee in the center. Sometimes, I will put my foot up to the front of the pad. If you were to use only the rear 1/4 of the pad, I would say that it would be somewhat dangerous as you would not have good stability. Hope this answers your question.
Will this device operate a USB Powered Hard drive so that it can become a file share?	First of all I am having trouble getting it to connect to the internet via my AT&T 3G Velocity Wi-Fi adaptor. As for the rest of the configuration I used, which does work nicely. It wirelessly displays itself, you can attach to it and resources like my external network hard drive, printer, other computers via the HUB. I took the RJ45 connection (made it a LAN connection in the Hame software) to a 4 port HUB, , connected a 2TB network hard drive to it, router wise it works great. The Hame issues the IP address's so a mini network is established, just like at my NY home (FIOS network/wireless router), I am setting this up for use on my floating winter home, a 38' Ketch in Florida. Fact is it works great in every way except I have not been able to connect to the internet through it, yet. I download the latest software from Hame, still have to install and retest. I hope this answers your question.......
what is the size of NA?	I ordered 3 and all came with one size. One size fit all. 1 x adult, 1x 9 year, 1 x 6 year
what is the size of NA?	I'm sure the size in not applicable, meaning it is one size fits all. The cap is very stretchable.
What is the filter size?	The filter size is 67mmhttp://www.nikonusa.com/en/Nikon-Products/Product/Camera-Lenses/2201/AF-S-NIKKOR-85mm-f%252F1.8G.html
Will a set of Sram Apex brakes work on this bike? Potentially with Cane Creek 200TT Levers on bullhorns?	i don't see why not. the bike's factory default brakes use the side pull system so i see no reason why the sram apex wont work. and for the brake levers, as long as you can find bullhorns that have a large or small enough diameter to fit the levers themselves. luckily, the quill stem on this bike is quite generous in terms of handlebar diameter. but to be sure, check the diameter online. for reference though, the quill fit my 25.4mm diameter bullhorns.
Will a set of Sram Apex brakes work on this bike? Potentially with Cane Creek 200TT Levers on bullhorns?	Probably not. The fork on this bike is cheaply made. I tried fitting SRAM and Shimano brakes to the fork but because of the way the fork is drilled it didn't fit properly.
Can this be hooked up to a Apple mini computer and used for a monitor screen ?	I use htmi to hook it up to use to view movies from my computer. However if you've got the tv hooked up to Dish or DirectTV you have to use the htmi unless there's a way to double up.
Will it fit TVs like IPS panel ? Model 42LN6300	Thanks everyone for the response, does this have warranty ? last year thanks giving i bought samsung 5300, last month my little one broken the TV LED accidently, but still TV is working fine,but with horizontal and vertical lines, i called samsung and they asked $650 to fix the TV, but that TV cost me only $327 last year, so i bought LG40LB6300 this thanks giving, this time i want to protect it.. also any idea is anyone ready to buy my cracked screen TV, since the other accesories might be helpful for others needy.....
Where can I get a "Attachment Buckle", i didnt know i would need to buy another part. HELP ME lol	It's inside the original camera box , yellow colored plastic item with a secrew.
Where can I get a "Attachment Buckle", i didnt know i would need to buy another part. HELP ME lol	Your not wrong! The "attachment buckle" is listed on the instruction sheet as "not included" I got my buckle from "Micro Center Computer and Electronics". They are nationwide and for about $7. I got the buckle and 2 plates (1 flat and 1 curved) with my attachment buckle
Where can I get a "Attachment Buckle", i didnt know i would need to buy another part. HELP ME lol	You don't need an attachment buckle. It comes with all the hardware between the camera and this mount.
Where can I get a "Attachment Buckle", i didnt know i would need to buy another part. HELP ME lol	If you are referring to the yellow quick release mounting plate, that and the polycarbonate waterproof camera case was included with your camera (unless you bought a used camera and the seller did not include all of the original accessories). This harness comes with the swivel mount that attaches to the yellow quick release plate, then the waterproof housing attaches to the swivel mount. No additional accessories should be required.
The ad says this purchase is eligible for a free stand, if both the saw and stand are Amazon purchases. How does that work? Credit or rebate?	The stand will show up in your cart at checkout as a -$99 promotion reduction. No rebate or waiting.
cascade 300 used to run quiet, now it makes noises, after about a year, like it is socking air or something what do I do?	I am not sure but on the Aquaclears one cause is by the impeller getting scratches around the magnet due to debris like gravel getting in and scratching that up. My suggestion would be to check to see if the impeller on the cascade 300 is removable and if it is (which I believe it is, but the ? is can you get it out), check to see if the magnet it scratched finely. If it is then google for a replacement impeller. Now that I think about it, I think they do sell them on ebay for like $7...
Will this work with an Iphone 4 from Virgin Mobile?	It will work with an Iphone 4s. Do not believe exterior dimesions vary between iphones sold by various dealers.Definitely protects phone but belt clip is not ideal imo.
Will this work with an Iphone 4 from Virgin Mobile?	It should work with any iPhone 4 or 4s. Mine is Verizon but am under the assumption that the externals are the SE size. I had accidentally ordered an AT&T; model and it fit my phone just like this one did just a slightly different design.
Can this printer print from an ipad or iphone?	Not directly because this printer doesnt has airprint, but you can print with a program called cloudprint. Hope this help you
Can this printer print from an ipad or iphone?	Good question, I think you can. I tried to setup printing from iOS, but never finished it. There is Apple software that has to be installed on a PC first. I need to finish testing this feature.
Can this printer print from an ipad or iphone?	No, this printer dose not support air print for Apple i devices. If you connect via USB to a Mac you can run software that will make it work.
Can this printer print from an ipad or iphone?	If it is not listed on this list then no AirPrinting does not work http://support.apple.com/kb/ht4356
Can this printer print from an ipad or iphone?	I have not done it myself, however, I would think you can as long as you have the usb connection. I love this printer. It does a lots of things that other printers don't do as well as the quality is great.
The time,speed, distance and calories all stay at 0 when I use the elliptical. What am I doing wrong?	Make sure you have set up your own profile so the machine knows who you are...
This is for the oven, right?	Yes! Make sure to use baking spray with flour though or you could lose chunks.
Does this work with the Pentax k-30?	It works perfectly with my Pentax K10 and it is my understanding that it should work with the K5 and all other Pentax DSLR's made since the K10..according to Pentax. I actually bought 2 for this reason.
Does this work with the Pentax k-30?	I used it with Pentax K100D Super and it worked. It should work with any Pentax DSLR.
Does this work with the Pentax k-30?	I am not sure ... Look in your K-30 manual under accessories . If it calls for a Pentax remote type F this remote WILL work .
Does this work with the Pentax k-30?	Yes! I just bought it for my K30 and it does work. You can set the camera to auto-focus when you press the remote and that works, too. I have had no problems with it, using it with the K30 and the DA 18-135mm lens.
Does this work with the Pentax k-30?	I've tested it with a K5 and the K100 and K110d and works with all of them. IF the k30 has IR remote ports (I believe it should) then I see no reason why this would not work with it, since Pentax brand remotes work on all their cameras.
Does this work with the Pentax k-30?	I think it should work. K30 may have the same remote IR systems just like the K-r. This is tested working using the K-r based on my experience.
Can you record a drum machine track on here and add vocals and guitar later?	Yes, Drum track would be track #1 Guitar track #2 etc. Treat track #1 like any other instrument input.
Can you record a drum machine track on here and add vocals and guitar later?	I always record the basic drum track on track 1 on the left set of knobs and then add guitars, keyboards, vocals, etc on the other tracks 2-8. You can export some of thise tracks and empty them out and reuse them again if you need more than the 8 available. As long as you keep a couple of basic tracks to follow along with, you'll still be able to make them all match up time wise.
Can you record a drum machine track on here and add vocals and guitar later?	Yes. This is a multi-track recorder, so you can have multiple parts in a single project.
Can you record a drum machine track on here and add vocals and guitar later?	Yes. There's also a metronome built in if you just need to establish a beat.
Can you record a drum machine track on here and add vocals and guitar later?	I have been recording for years but - I was the guy saying can you give me another track for this or that. Never touched the buttons and my friend has a vast system so have been intimidated to start on my own. Can you create a mix and bump 3+ tracks down to 1 line then have extra tracks open to add more?
Are these plates actually having by the ribbons? Seems a bit insecure. Are hanging instructions included?	Yes, you hang them from the ribbons. Mine are been up for over 6 months and so far they still secure. No hanging instructions.
Are these plates actually having by the ribbons? Seems a bit insecure. Are hanging instructions included?	Yes they hang by the ribbon. The ribbon is actually pretty thick and strong. I have the plates hanging in my kitchen on gadzooks. They don't move at all when my three kids are running around or when the kitchen door closes. I love them!
Are these plates actually having by the ribbons? Seems a bit insecure. Are hanging instructions included?	Yes, they are meant to hang by the ribbons. No there are not any directions. We chose to use plate hangers to hang ours and change the ribbons often to coordinate with the holidays and seasons.
Are these plates actually having by the ribbons? Seems a bit insecure. Are hanging instructions included?	Yes they are hung by ribbons, I don't remember if there were any instructions, pretty self explanatory. Though we did use nails and hung the plates using the holes in their designs. This was much easier and seemed much more sturdy/steadfast.
What keyboard would you suggest buying with this Orgami Workstation with IPad 2. Also can you use a mouse and is there a certain one you can suggest?	I think it's been designed for Apple's wireless keyboard exclusively. It works with all the iPads (and probably any non-Apple tablet). I honestly don't know if a Bluetooth mouse will work on the iPad.
What keyboard would you suggest buying with this Orgami Workstation with IPad 2. Also can you use a mouse and is there a certain one you can suggest?	This works with the Apple keyboard. In fact, it was specifically made for it. I have read that you can't use a mouse with the iPad.
What keyboard would you suggest buying with this Orgami Workstation with IPad 2. Also can you use a mouse and is there a certain one you can suggest?	I have the standard Apple Bluetooth keyboard and it seems to work fine. I do not believe iPads are meant to use the mouse. When you use the keyboard with an iPad you have to get used to doing some things that you'd normally do with the mouse with a finger on the screen. Takes some getting used to, but it works. I don't see the iPad as an exact replacement for a laptop, but a set-up that can stand in for one occasionally. In any case, you might want to double-check my answer on the mouse -- I could be wrong, but as far as I know you can't use it. Good luck!
What keyboard would you suggest buying with this Orgami Workstation with IPad 2. Also can you use a mouse and is there a certain one you can suggest?	You can only use the Origami with apple's bluetooth wireless keyboard. You cannot use a mouse with an iPad. It has a touchscreen, so you navigate and "click" by dragging and tapping directly on the screen with your fingers.
What keyboard would you suggest buying with this Orgami Workstation with IPad 2. Also can you use a mouse and is there a certain one you can suggest?	I am using the apple wireless keyboard for it and not the mouse. Since it is the iPad, one stylus pen would do fine. But for having the keyboard around, this case really works.
What keyboard would you suggest buying with this Orgami Workstation with IPad 2. Also can you use a mouse and is there a certain one you can suggest?	Get the Apple Wireless keyboard. The case is designed for it. You can't use a mouse with an IPad as far as I know, but then there is no reason to use one. You can still just touch the screen to place the cursor, open and close apps, or whatever. It might feel a little awkward to begin with but the adjustment is swift.
What keyboard would you suggest buying with this Orgami Workstation with IPad 2. Also can you use a mouse and is there a certain one you can suggest?	I use an Apple wireless keyboard, which I love. I see no way a mouse can be used with it. I also like the Orgami Workstation.
Wiil it work well nikon D800 with 18-300 lens very heavy?	Hi, I think it will work with them very well. (But what I concern is that 18-300mm is a DX lens, is it right? I don't know if it works with your D800 body.) I bought the whole set about 8 months ago. I am very happywith them. It is very sturdy and stylish. Now I am using DX format body D7000 (weight 690g) , with 17-55mm 2.8g lens (weight 755g, length 110mm) and 70-300mm 4.5-5.6g lens (weight 745g, length 143mm).Either of them with the body works with the tripod set without problem. D800 weights 900g. 18-300mm lensweights 830g, its length 120mm. I think the only problem is that if 18-300mm is the DX format lens, I don't think itwill fit the D800 full frame body. Hopefully it will help you a bit. Good luck! Thank you! Hi, I think it will work with them very well. (But what I concern is that 18-300mm is a DX lens, is it right? I don't know if it works with your D800 body.) I bought the whole set about 8 months ago. I am very happywith them. It is very sturdy and stylish. Now I am using DX format body D7000 (weight 690g) , with 17-55mm 2.8g lens (weight 755g, length 110mm) and 70-300mm 4.5-5.6g lens (weight 745g, length 143mm).Either of them with the body works with the tripod set without problem. D800 weights 900g. 18-300mm lensweights 830g, its length 120mm. I think the only... » Read More Hi, I think it will work with them very well. (But what I concern is that 18-300mm is a DX lens, is it right? I don't know if it works with your D800 body.) I bought the whole set about 8 months ago. I am very happywith them. It is very sturdy and stylish. Now I am using DX format body D7000 (weight 690g) , with 17-55mm 2.8g lens (weight 755g, length 110mm) and 70-300mm 4.5-5.6g lens (weight 745g, length 143mm).Either of them with the body works with the tripod set without problem. D800 weights 900g. 18-300mm lensweights 830g, its length 120mm. I think the only problem is that if 18-300mm is the DX format lens, I don't think itwill fit the D800 full frame body. Hopefully it will help you a bit. Good luck! Thank you! « Show Less
Wiil it work well nikon D800 with 18-300 lens very heavy?	Yea I've got a d800 and it holds all my large lenses at very awkward angles. I'm very comfortable leaving it as it is with -10k worth of equipment. Very sturdy
Wiil it work well nikon D800 with 18-300 lens very heavy?	Not sure about the nikon but My Canon D60 w/ 70-300 IS lens weighs 4.10 lbs and it did great with that.
My 10 yr old RD-600 just died, Its connected to power in a very complicated way. Can I simply replace the box with a newer model of the RD-600?	??. It just has an outboard transformer / power supply that needs to be plugged in to a 120 V AC outlet. Maybe you can just use the old power supply in place now assuming it's working properly.
My 10 yr old RD-600 just died, Its connected to power in a very complicated way. Can I simply replace the box with a newer model of the RD-600?	First thing I would try is remove all power from the panel. Disconnect the battery(and check it's voltage as this is the usual culprit), unplug the ribbon cable from the terminal board, reconnect after a few minutes. If the problem persists, replacement may be necessary. Since they've made a few changes (most notably the ribbon cable connector) replacement will require both terminal board and panel. The controller housing and internal parts mounting haven't changed, so replacing with the same model would be fairly easy.
My old ironing board measures 15" across and 54" in length. Does this cover have allowance for the sides and sligtly under?	That is the size of the ironing board I own. It's a tight fit, but it works. There are 2 sets of velcro straps under the board to hold it taut. I had to add another (very short) piece of velcro in order for it to reach across the underside of the board. I also have some old "garter" type of fasteners that I used to make it taut all over the board.
My old ironing board measures 15" across and 54" in length. Does this cover have allowance for the sides and sligtly under?	Yes mam it should fit perfectly. I bought 2 different ones at Walmart and they said they fit but when I got them home they did not fit! I finally took a chance on this one because I sometimes have better luck with Amazon products and WALLA this fit perfectly and was a whiz to get on!
Can you use the auxiliary jack? My current case doesn't allow auxiliary cables to be plugged in enough to actually hear things...	I can use my earbuds just fine with the ion case. The lower power cable jack is reformatted to a small connect and is used for charging only and no other auxiliary usage.
How does the feature to automatically turn on the unit when you turn on your TV work? Is it based on receiving a signal from input or from a remote?	... this has nothing to do with the remote 'learn mode'. From what I read, it will 'sleep' if no signal for several minutes, then wake up upon signal. Waiting for mine to arrive, so will know more shortly.
How does the feature to automatically turn on the unit when you turn on your TV work? Is it based on receiving a signal from input or from a remote?	You put the unit in learn mode. Then it listens to buttons pressed on the remote to train. Read the instructions. It is all there.
If I buy all eight set sat once will you give me a more fair shipping rate?	All of my items are at the amazon warehouse so they put in the shipping, but it should discount it for you automatically. Thanks!
Will this plug into a 2 prong outlet ?	no it will not,it has a plastic 3rd bottom prong for support,it use the top ones,not for two prong outlets.
Will this plug into a 2 prong outlet ?	Yes it will. Somebody said there are instructions. I found no instructions, but the 3rd prongs snapped right off with a pair of pliers. They are working like a champ.
Will this plug into a 2 prong outlet ?	No, as this device is designed to cover existing grounded duplexes only. You can only use this device with a three-prong outlet.
Is the keyboard compatible with samsung Galaxy Blaze 4G	It worked fine with the galaxy S4. It will almost surely work with any bluetooth device. Keep in mind, the keyboard is junk anyway.
How is this about showing fingerprints on the stainless steel? Some SS shows every fingerprint!	Does show fingerprints, but it is easy to wipe clean with a damp paper towel.
How is this about showing fingerprints on the stainless steel? Some SS shows every fingerprint!	I find that these are very good about NOT showing fingerprints, I love to cook so I am touching these every day and LOVE them!!!
Are these microwave safe?	I do not know what the manufacturer would say but technically there is no BPA in them so they should not leak toxins. However it is my opinion that no plastic should go into the microwave.
Are the sticky pads included?	Yes - the black pieces have the foam adhesive pads already installed. You just remove the backing and apply the mount.
Harmonica Newbie: Can someone please answer what may be a dumb question?	You can hold it on your left hand or right hand. I saw Bob Dylon use a stand, he even do not use any of his hand. So, just feel comfortable.
Do one or two bags come with this order?	This only came with one, I was disappointed by that especially after one person said it came with two.
Do one or two bags come with this order?	honestly...i cant remember if i purchased 2 bags or it came with 2 bags...my apologies-

Is it breathable? I don't like to get sweaty.

I only wear it when it's really cold, cause I'm the same way. It does seem "breathable" though. We had a really cold snowy winter last year and I wore it sleigh riding a few times, and I sweat even when it's freezing out. I really do like the coat a lot.

Is it breathable? I don't like to get sweaty.

To date, I have not gotten sweaty in my coat. However, if you're dressed too warmly for the weather, you probably will sweat.

Does this case come with protective flaps or inserts for the USB port and aux input? Like how the Otterbox Defender case does to protect from dust?

Yes, there are attached covers made of the same rubber as the soft part of the case itself.

Does this case come with protective flaps or inserts for the USB port and aux input? Like how the Otterbox Defender case does to protect from dust?

I really like it. It has no face cover but the sides have both hard plastic and rubber and the back is hard plastic and easy pull out for a stand. it has plastic cut coverings for USB port and head phones. Hope this helps.

Does this case come with protective flaps or inserts for the USB port and aux input? Like how the Otterbox Defender case does to protect from dust?

Yes, there are flaps covering the USB & Aux. Input ports. They seem to fit snug enough to limit anything entering.

Does this case come with protective flaps or inserts for the USB port and aux input? Like how the Otterbox Defender case does to protect from dust?

Yes, both the USP port and headphone input ports on the phone are covered by rubber flaps on the case.

How tall are the bed legs? I want a tall bed, with a lot of space underneath.

It's almost 11 inches. I think it's a fair amount of room underneath. I'm a big fan of Room Doctor furniture. I now have three different pieces of their furniture, and each piece is very well built.

How tall are the bed legs? I want a tall bed, with a lot of space underneath.

Not very tall at all. This is not a tall bed. You can fit the underbed boxes or duffles underneath, but that's about it. This is great simple, sturdy, solid wood bed. One of the things I like best about it is that it is relatively close to the floor and easy to get in/out of for short people. I went to a furniture store and all the beds were too tall for me to easily get in and out, without using the little steps. Good luck!

How tall are the bed legs? I want a tall bed, with a lot of space underneath.

About 11 inches. A friend of mine bought 4" table leg extenders from Home Depot for her queen-size bed so she could store some taller items under her bed. She says they are very sturdy and, as long as you aren't jumping on the bed, they won't tip over. However, she is only 5 ft 2" tall and about 127 pounds, so I don't know if the legs are rated for larger individuals, or couples.

How tall are the bed legs? I want a tall bed, with a lot of space underneath.

there is 10.5 inches of clearance between the floor and the bad frame. i like this bed, it's a solid and simple platform bed.

would it fit a laptop with a 17.3" panel?

Well...i honestly dont know.cos it is I don't have such a big computer. But it is a good backpack.i have changed quite a few backpacks and this is the one that lasts...:) I confirmed it.it will not fit

is this backpack good for extended hour hiking trips. im going on a 12 mile hike and it takes about 7 hours round trip.will this be a good liter size?

I've used it in 20+mile day hikes in Nepal, fits a 3 litre camelback and lots of room for whatever you need.

I'm 5' 3" would the short be too short on me?

I'm 5'3 and got a regular medium and they were baggy where I could wear heavy stuff under and be baggy and comfortable. The length was a little long but perfect over ski boots. I'm 125 by the way

This product recommends Microsoft Office 2010 which does NOT have PowerPoint. Any reason I can't buy PowerPoint?

There is no reason why you can't buy PowerPoint and use it on this PC. PowerPoint is a standard Windows application and is completely compatable with all modern PCs running MS Windows. There are several versions of Office, the Professional Version includes PowerPoint or it can be purchased seperately too.

Can't get this device to work. Read and applied recommended display resolutions, and no luck. Help Please!

You have to put it in HDMI-for use as a computer monitor.Other HDMI inputs,won't work.Check your tv,owner manual,on input devices.Another thing is,is that you hook everything up,before you turn on your computer,otherwise it will show wrong format,on your tv screen.

Can't get this device to work. Read and applied recommended display resolutions, and no luck. Help Please!

When you say resolution, you mean the image on the TV? I had to force my computerto the correct one, because it says you have the wrong resolution. Did the computer detect your monitor/TV set?

Can't get this device to work. Read and applied recommended display resolutions, and no luck. Help Please!

I really don't know. Make sure your using the vga cable and hdmi. Play with the laptop screen resolution. Sorry I can't help more.

Arte the switches prewired?

Yes they are prewired with a power and ground wire with spade connectors to hook to

Arte the switches prewired?

High Quality Panel , 1 Hot wire in , Ground wire , ready to go to each Run...

I am looking for something to help with my under eye bags.

I didn't find that it helped with mine, but I have a sodium issue so I am trying to drink lot's of water with lemon but it seems to tighten the skin around the eyes.

I am looking for something to help with my under eye bags.

This works well. I keep in fridge so it is always cold and that enhances the effect. This was suggested by one of the mall guys that I got a sample from. I purchased here for the price!

I am looking for something to help with my under eye bags.

I haven't noticed a big difference yet. I'm still using this product, but unsure if I'll reorder.

Does it support Wifi to stream movies from youtube or computer ?

No. You would need an AppleTV or equivalent to interface from a stream to HDMI

I loved the look of this fixture until someone said that the bulbs are exposed from the bottom. That's a deal breaker. Bother anyone else?

Actually I have this light fixture and yes you have access to change the bulbs from the end, however, the bulbs are not exposed. You have to reach inside to change the bulb. It's really beautiful once installed as a wall light. I wouldn't use it for anything other than a wall light.

I loved the look of this fixture until someone said that the bulbs are exposed from the bottom. That's a deal breaker. Bother anyone else?

If you are hanging these above eye level and decide you want to hug the wall under them maybe it might bother you. Otherwise, these are nice lights and look great in a room.

I loved the look of this fixture until someone said that the bulbs are exposed from the bottom. That's a deal breaker. Bother anyone else?

We have 2 of these on our wall next to the TV. I cannot see the bulbs on either one.

I loved the look of this fixture until someone said that the bulbs are exposed from the bottom. That's a deal breaker. Bother anyone else?

True. If you get down low and look up at the light , you can see the bulb. . Not really a deal breaker. Mine is high in a stairwell. I like it.

I loved the look of this fixture until someone said that the bulbs are exposed from the bottom. That's a deal breaker. Bother anyone else?

Not on mine. Unless your standing under it and you look up. I have two on my back living room wall, on a dimmer too. Love them. Nice size too.

Is the knee rest too long if you have a boot on your foot?

No my husband has to wear a vaco cast pro/achilles boot. It is huge. You can google it and see pics of the boot. My husband loves his knee walker. It is so much safer than crutches. And he does not have sore hands and arm pits from "crutching around" I hope this answers your question.

Is the knee rest too long if you have a boot on your foot?

No, I have worn a boot the last week and a half and it's been fine. If your non weight bearing this is absolutely worth the money. I could still do household chores and function almost normally. I also have crutches and used a couple of times but this is just more stable and I felt so much more "normal" on this then I did crutches. I give this on a scale of 1-10 a 20!!

Is the knee rest too long if you have a boot on your foot?

I bought this originally for my mom who had extensive surgery on her foot and was in a cast and then boot and then walking boot for a period of three months. She used it during all three and loved the ease she had of getting around the house as it still hurt to walk. She gave the scooter to a friend of hers who went through bunion surgery and had a boot on her foot and she loved it too.

Is the knee rest too long if you have a boot on your foot?

No, I had a cast & boot. The cut out seat makes it very comfortable. First walker I had was a long flat seat. Horrible. PT in hospital showed me this one. Medicare doesn't cover. Rental was $150 @ month. Hence the awesome Amazon purchase.

Is the knee rest too long if you have a boot on your foot?

I do not think it is too long, I have a cast half way up to my knee and it works well, I do not use the entire pad, I position my knee in the center. Sometimes, I will put my foot up to the front of the pad. If you were to use only the rear 1/4 of the pad, I would say that it would be somewhat dangerous as you would not have good stability. Hope this answers your question.

Will this device operate a USB Powered Hard drive so that it can become a file share?

First of all I am having trouble getting it to connect to the internet via my AT&T 3G Velocity Wi-Fi adaptor. As for the rest of the configuration I used, which does work nicely. It wirelessly displays itself, you can attach to it and resources like my external network hard drive, printer, other computers via the HUB. I took the RJ45 connection (made it a LAN connection in the Hame software) to a 4 port HUB, , connected a 2TB network hard drive to it, router wise it works great. The Hame issues the IP address's so a mini network is established, just like at my NY home (FIOS network/wireless router), I am setting this up for use on my floating winter home, a 38' Ketch in Florida. Fact is it works great in every way except I have not been able to connect to the internet through it, yet. I download the latest software from Hame, still have to install and retest. I hope this answers your question.......

what is the size of NA?

I ordered 3 and all came with one size. One size fit all. 1 x adult, 1x 9 year, 1 x 6 year

what is the size of NA?

I'm sure the size in not applicable, meaning it is one size fits all. The cap is very stretchable.

What is the filter size?

The filter size is 67mmhttp://www.nikonusa.com/en/Nikon-Products/Product/Camera-Lenses/2201/AF-S-NIKKOR-85mm-f%252F1.8G.html

Will a set of Sram Apex brakes work on this bike? Potentially with Cane Creek 200TT Levers on bullhorns?

i don't see why not. the bike's factory default brakes use the side pull system so i see no reason why the sram apex wont work. and for the brake levers, as long as you can find bullhorns that have a large or small enough diameter to fit the levers themselves. luckily, the quill stem on this bike is quite generous in terms of handlebar diameter. but to be sure, check the diameter online. for reference though, the quill fit my 25.4mm diameter bullhorns.

Will a set of Sram Apex brakes work on this bike? Potentially with Cane Creek 200TT Levers on bullhorns?

Probably not. The fork on this bike is cheaply made. I tried fitting SRAM and Shimano brakes to the fork but because of the way the fork is drilled it didn't fit properly.

Can this be hooked up to a Apple mini computer and used for a monitor screen ?

I use htmi to hook it up to use to view movies from my computer. However if you've got the tv hooked up to Dish or DirectTV you have to use the htmi unless there's a way to double up.

Will it fit TVs like IPS panel ? Model 42LN6300

Thanks everyone for the response, does this have warranty ? last year thanks giving i bought samsung 5300, last month my little one broken the TV LED accidently, but still TV is working fine,but with horizontal and vertical lines, i called samsung and they asked $650 to fix the TV, but that TV cost me only $327 last year, so i bought LG40LB6300 this thanks giving, this time i want to protect it.. also any idea is anyone ready to buy my cracked screen TV, since the other accesories might be helpful for others needy.....

Where can I get a "Attachment Buckle", i didnt know i would need to buy another part. HELP ME lol

It's inside the original camera box , yellow colored plastic item with a secrew.

Where can I get a "Attachment Buckle", i didnt know i would need to buy another part. HELP ME lol

Your not wrong! The "attachment buckle" is listed on the instruction sheet as "not included" I got my buckle from "Micro Center Computer and Electronics". They are nationwide and for about $7. I got the buckle and 2 plates (1 flat and 1 curved) with my attachment buckle

Where can I get a "Attachment Buckle", i didnt know i would need to buy another part. HELP ME lol

You don't need an attachment buckle. It comes with all the hardware between the camera and this mount.

Where can I get a "Attachment Buckle", i didnt know i would need to buy another part. HELP ME lol

If you are referring to the yellow quick release mounting plate, that and the polycarbonate waterproof camera case was included with your camera (unless you bought a used camera and the seller did not include all of the original accessories). This harness comes with the swivel mount that attaches to the yellow quick release plate, then the waterproof housing attaches to the swivel mount. No additional accessories should be required.

The ad says this purchase is eligible for a free stand, if both the saw and stand are Amazon purchases. How does that work? Credit or rebate?

The stand will show up in your cart at checkout as a -$99 promotion reduction. No rebate or waiting.

cascade 300 used to run quiet, now it makes noises, after about a year, like it is socking air or something what do I do?

I am not sure but on the Aquaclears one cause is by the impeller getting scratches around the magnet due to debris like gravel getting in and scratching that up. My suggestion would be to check to see if the impeller on the cascade 300 is removable and if it is (which I believe it is, but the ? is can you get it out), check to see if the magnet it scratched finely. If it is then google for a replacement impeller. Now that I think about it, I think they do sell them on ebay for like $7...

Will this work with an Iphone 4 from Virgin Mobile?

It will work with an Iphone 4s. Do not believe exterior dimesions vary between iphones sold by various dealers.Definitely protects phone but belt clip is not ideal imo.

Will this work with an Iphone 4 from Virgin Mobile?

It should work with any iPhone 4 or 4s. Mine is Verizon but am under the assumption that the externals are the SE size. I had accidentally ordered an AT&T; model and it fit my phone just like this one did just a slightly different design.

Can this printer print from an ipad or iphone?

Not directly because this printer doesnt has airprint, but you can print with a program called cloudprint. Hope this help you

Can this printer print from an ipad or iphone?

Good question, I think you can. I tried to setup printing from iOS, but never finished it. There is Apple software that has to be installed on a PC first. I need to finish testing this feature.

Can this printer print from an ipad or iphone?

No, this printer dose not support air print for Apple i devices. If you connect via USB to a Mac you can run software that will make it work.

Can this printer print from an ipad or iphone?

If it is not listed on this list then no AirPrinting does not work http://support.apple.com/kb/ht4356

Can this printer print from an ipad or iphone?

I have not done it myself, however, I would think you can as long as you have the usb connection. I love this printer. It does a lots of things that other printers don't do as well as the quality is great.

The time,speed, distance and calories all stay at 0 when I use the elliptical. What am I doing wrong?

Make sure you have set up your own profile so the machine knows who you are...

This is for the oven, right?

Yes! Make sure to use baking spray with flour though or you could lose chunks.

Does this work with the Pentax k-30?

It works perfectly with my Pentax K10 and it is my understanding that it should work with the K5 and all other Pentax DSLR's made since the K10..according to Pentax. I actually bought 2 for this reason.

Does this work with the Pentax k-30?

I used it with Pentax K100D Super and it worked. It should work with any Pentax DSLR.

Does this work with the Pentax k-30?

I am not sure ... Look in your K-30 manual under accessories . If it calls for a Pentax remote type F this remote WILL work .

Does this work with the Pentax k-30?

Yes! I just bought it for my K30 and it does work. You can set the camera to auto-focus when you press the remote and that works, too. I have had no problems with it, using it with the K30 and the DA 18-135mm lens.

Does this work with the Pentax k-30?

I've tested it with a K5 and the K100 and K110d and works with all of them. IF the k30 has IR remote ports (I believe it should) then I see no reason why this would not work with it, since Pentax brand remotes work on all their cameras.

Does this work with the Pentax k-30?

I think it should work. K30 may have the same remote IR systems just like the K-r. This is tested working using the K-r based on my experience.

Can you record a drum machine track on here and add vocals and guitar later?

Yes, Drum track would be track #1 Guitar track #2 etc. Treat track #1 like any other instrument input.

Can you record a drum machine track on here and add vocals and guitar later?

I always record the basic drum track on track 1 on the left set of knobs and then add guitars, keyboards, vocals, etc on the other tracks 2-8. You can export some of thise tracks and empty them out and reuse them again if you need more than the 8 available. As long as you keep a couple of basic tracks to follow along with, you'll still be able to make them all match up time wise.

Can you record a drum machine track on here and add vocals and guitar later?

Yes. This is a multi-track recorder, so you can have multiple parts in a single project.

Can you record a drum machine track on here and add vocals and guitar later?

Yes. There's also a metronome built in if you just need to establish a beat.

Can you record a drum machine track on here and add vocals and guitar later?

I have been recording for years but - I was the guy saying can you give me another track for this or that. Never touched the buttons and my friend has a vast system so have been intimidated to start on my own. Can you create a mix and bump 3+ tracks down to 1 line then have extra tracks open to add more?

Are these plates actually having by the ribbons? Seems a bit insecure. Are hanging instructions included?

Yes, you hang them from the ribbons. Mine are been up for over 6 months and so far they still secure. No hanging instructions.

Are these plates actually having by the ribbons? Seems a bit insecure. Are hanging instructions included?

Yes they hang by the ribbon. The ribbon is actually pretty thick and strong. I have the plates hanging in my kitchen on gadzooks. They don't move at all when my three kids are running around or when the kitchen door closes. I love them!

Are these plates actually having by the ribbons? Seems a bit insecure. Are hanging instructions included?

Yes, they are meant to hang by the ribbons. No there are not any directions. We chose to use plate hangers to hang ours and change the ribbons often to coordinate with the holidays and seasons.

Are these plates actually having by the ribbons? Seems a bit insecure. Are hanging instructions included?

Yes they are hung by ribbons, I don't remember if there were any instructions, pretty self explanatory. Though we did use nails and hung the plates using the holes in their designs. This was much easier and seemed much more sturdy/steadfast.