code
stringlengths 3
1.03M
| repo_name
stringlengths 5
84
| path
stringlengths 4
233
| language
stringclasses 1
value | license
stringclasses 15
values | size
int32 3
1.03M
|
|---|---|---|---|---|---|
:: (c) Copyright 2009 - 2010 Xilinx, Inc. All rights reserved.
::
:: This file contains confidential and proprietary information
:: of Xilinx, Inc. and is protected under U.S. and
:: international copyright and other intellectual property
:: laws.
::
:: DISCLAIMER
:: This disclaimer is not a license and does not grant any
:: rights to the materials distributed herewith. Except as
:: otherwise provided in a valid license issued to you by
:: Xilinx, and to the maximum extent permitted by applicable
:: law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
:: WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
:: AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
:: BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
:: INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
:: (2) Xilinx shall not be liable (whether in contract or tort,
:: including negligence, or under any other theory of
:: liability) for any loss or damage of any kind or nature
:: related to, arising under or in connection with these
:: materials, including for any direct, or any indirect,
:: special, incidental, or consequential loss or damage
:: (including loss of data, profits, goodwill, or any type of
:: loss or damage suffered as a result of any action brought
:: by a third party) even if such damage or loss was
:: reasonably foreseeable or Xilinx had been advised of the
:: possibility of the same.
::
:: CRITICAL APPLICATIONS
:: Xilinx products are not designed or intended to be fail-
:: safe, or for use in any application requiring fail-safe
:: performance, such as life-support or safety devices or
:: systems, Class III medical devices, nuclear facilities,
:: applications related to the deployment of airbags, or any
:: other applications that could lead to death, personal
:: injury, or severe property or environmental damage
:: (individually and collectively, "Critical
:: Applications"). Customer assumes the sole risk and
:: liability of any use of Xilinx products in Critical
:: Applications, subject only to applicable laws and
:: regulations governing limitations on product liability.
::
:: THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
:: PART OF THIS FILE AT ALL TIMES.
rem Clean up the results directory
rmdir /S /Q results
mkdir results
rem Synthesize the VHDL Wrapper Files
#Synthesize the Wrapper Files
echo 'Synthesizing example design with Synplify'
synplify_pro -batch synplify.prj -licensetype synplifypro_xilinx
rem Copy the netlist generated by Coregen
echo 'Copying files from the netlist directory to the results directory'
copy ..\..\fifo_tx.ngc results\
rem Copy the constraints files generated by Coregen
echo 'Copying files from constraints directory to results directory'
copy ..\example_design\fifo_tx_exdes.ucf results\
cd results
echo 'Running ngdbuild'
ngdbuild -p xc3s1600e-fg484-4 -sd ../../../ fifo_tx_exdes
echo 'Running map'
map fifo_tx_exdes -o mapped.ncd
echo 'Running par'
par mapped.ncd routed.ncd
echo 'Running trce'
trce -e 10 routed.ncd mapped.pcf -o routed
echo 'Running design through bitgen'
bitgen -w routed
echo 'Running netgen to create gate level Verilog model'
netgen -ofmt verilog -sim -tm fifo_tx_exdes -pcf mapped.pcf -w -sdf_anno false routed.ncd routed.v
| gigglesninja/digital-system-design | uart/ipcore_dir/fifo_tx/implement/implement_synplify.bat | bat | gpl-2.0 | 3,266 |
cmd_arch/arm/lib/getuser.o := ../tools/arm-bcm2708/arm-bcm2708hardfp-linux-gnueabi/bin/arm-bcm2708hardfp-linux-gnueabi-gcc -Wp,-MD,arch/arm/lib/.getuser.o.d -nostdinc -isystem /home/xdf-531/Desktop/rtLinux_V2/tools/arm-bcm2708/arm-bcm2708hardfp-linux-gnueabi/bin/../lib/gcc/arm-bcm2708hardfp-linux-gnueabi/4.7.1/include -I./arch/arm/include -Iarch/arm/include/generated -Iinclude -I./arch/arm/include/uapi -Iarch/arm/include/generated/uapi -I./include/uapi -Iinclude/generated/uapi -include ./include/linux/kconfig.h -D__KERNEL__ -mlittle-endian -Iarch/arm/mach-bcm2709/include -D__ASSEMBLY__ -mabi=aapcs-linux -mno-thumb-interwork -mfpu=vfp -funwind-tables -marm -D__LINUX_ARM_ARCH__=7 -march=armv7-a -include asm/unified.h -msoft-float -c -o arch/arm/lib/getuser.o arch/arm/lib/getuser.S
source_arch/arm/lib/getuser.o := arch/arm/lib/getuser.S
deps_arch/arm/lib/getuser.o := \
$(wildcard include/config/cpu/use/domains.h) \
$(wildcard include/config/thumb2/kernel.h) \
arch/arm/include/asm/unified.h \
$(wildcard include/config/arm/asm/unified.h) \
include/linux/linkage.h \
include/linux/compiler.h \
$(wildcard include/config/sparse/rcu/pointer.h) \
$(wildcard include/config/trace/branch/profiling.h) \
$(wildcard include/config/profile/all/branches.h) \
$(wildcard include/config/enable/must/check.h) \
$(wildcard include/config/enable/warn/deprecated.h) \
$(wildcard include/config/kprobes.h) \
include/linux/stringify.h \
include/linux/export.h \
$(wildcard include/config/have/underscore/symbol/prefix.h) \
$(wildcard include/config/modules.h) \
$(wildcard include/config/modversions.h) \
$(wildcard include/config/unused/symbols.h) \
arch/arm/include/asm/linkage.h \
arch/arm/include/asm/assembler.h \
$(wildcard include/config/cpu/endian/be8.h) \
$(wildcard include/config/cpu/feroceon.h) \
$(wildcard include/config/trace/irqflags.h) \
$(wildcard include/config/cpu/v7m.h) \
$(wildcard include/config/preempt/count.h) \
$(wildcard include/config/smp.h) \
arch/arm/include/asm/ptrace.h \
$(wildcard include/config/arm/thumb.h) \
arch/arm/include/uapi/asm/ptrace.h \
arch/arm/include/asm/hwcap.h \
arch/arm/include/uapi/asm/hwcap.h \
arch/arm/include/asm/domain.h \
$(wildcard include/config/io/36.h) \
arch/arm/include/asm/opcodes-virt.h \
arch/arm/include/asm/opcodes.h \
$(wildcard include/config/cpu/endian/be32.h) \
arch/arm/include/asm/asm-offsets.h \
include/generated/asm-offsets.h \
arch/arm/include/asm/page.h \
$(wildcard include/config/mmu.h) \
$(wildcard include/config/cpu/copy/v4wt.h) \
$(wildcard include/config/cpu/copy/v4wb.h) \
$(wildcard include/config/cpu/copy/feroceon.h) \
$(wildcard include/config/cpu/copy/fa.h) \
$(wildcard include/config/cpu/sa1100.h) \
$(wildcard include/config/cpu/xscale.h) \
$(wildcard include/config/cpu/xsc3.h) \
$(wildcard include/config/cpu/copy/v6.h) \
$(wildcard include/config/kuser/helpers.h) \
$(wildcard include/config/arm/lpae.h) \
$(wildcard include/config/have/arch/pfn/valid.h) \
include/asm-generic/getorder.h \
arch/arm/include/asm/thread_info.h \
$(wildcard include/config/crunch.h) \
$(wildcard include/config/arm/thumbee.h) \
arch/arm/include/asm/fpstate.h \
$(wildcard include/config/vfpv3.h) \
$(wildcard include/config/iwmmxt.h) \
arch/arm/include/generated/asm/errno.h \
include/uapi/asm-generic/errno.h \
include/uapi/asm-generic/errno-base.h \
arch/arm/lib/getuser.o: $(deps_arch/arm/lib/getuser.o)
$(deps_arch/arm/lib/getuser.o):
| avareldalton85/rpi2-linux-rt | arch/arm/lib/.getuser.o.cmd | bat | gpl-2.0 | 3,629 |
cmd_usr/initramfs_data.cpio.gz := /bin/bash /home/mrd/Descargas/Undervolting/package/MyKernel/scripts/gen_initramfs_list.sh -o usr/initramfs_data.cpio.gz -u 0 -g 0 /tmp/initramfs-source.cpio
| pedestre/Kernel-Apolo-ICS-4.0.4 | usr/.initramfs_data.cpio.gz.cmd | bat | gpl-2.0 | 194 |
cmd_sound/soc/txx9/built-in.o := rm -f sound/soc/txx9/built-in.o; /home/ar/android/aosp/prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin/arm-eabi-ar rcs sound/soc/txx9/built-in.o
| kannu1994/crespo_kernel | sound/soc/txx9/.built-in.o.cmd | bat | gpl-2.0 | 179 |
cmd_drivers/bcma/built-in.o := rm -f drivers/bcma/built-in.o; ../tools/arm-bcm2708/arm-bcm2708hardfp-linux-gnueabi/bin/arm-bcm2708hardfp-linux-gnueabi-ar rcsD drivers/bcma/built-in.o
| avareldalton85/rpi2-linux-rt | drivers/bcma/.built-in.o.cmd | bat | gpl-2.0 | 184 |
cmd_sound/usb/snd-usbmidi-lib.o := /home/chiehyang/PandaBoard-LinuxKernel/gcc-linaro-arm-linux-gnueabihf-4.7-2013.03-20130313_linux/bin/arm-linux-gnueabihf-ld -EL -r -o sound/usb/snd-usbmidi-lib.o sound/usb/midi.o
| domintech/PandaBoard-LinuxKernel | sound/usb/.snd-usbmidi-lib.o.cmd | bat | gpl-2.0 | 218 |
cmd_drivers/media/usb/stkwebcam/built-in.o := rm -f drivers/media/usb/stkwebcam/built-in.o; ../tools/arm-bcm2708/arm-bcm2708hardfp-linux-gnueabi/bin/arm-bcm2708hardfp-linux-gnueabi-ar rcsD drivers/media/usb/stkwebcam/built-in.o
| avareldalton85/rpi2-linux-rt | drivers/media/usb/stkwebcam/.built-in.o.cmd | bat | gpl-2.0 | 229 |
cmd_sound/usb/built-in.o := /home/jashaswee/vibex2/X2_ROW_L_OpenSource/arm-linux-androideabi-4.9/bin/arm-linux-androideabi-ld -EL -r -o sound/usb/built-in.o sound/usb/snd-usb-audio.o sound/usb/snd-usbmidi-lib.o sound/usb/misc/built-in.o sound/usb/usx2y/built-in.o sound/usb/caiaq/built-in.o sound/usb/6fire/built-in.o
| jashasweejena/VibeKernel | sound/usb/.built-in.o.cmd | bat | gpl-2.0 | 323 |
cmd_net/core/net-sysfs.o := /opt/arm-2008q1/bin/arm-none-linux-gnueabi-gcc -Wp,-MD,net/core/.net-sysfs.o.d -nostdinc -isystem /data/linux/opt/arm-2008q1/bin/../lib/gcc/arm-none-linux-gnueabi/4.2.3/include -Iinclude -I/data/embedded/acer/acergit/linux/arch/arm/include -include include/linux/autoconf.h -D__KERNEL__ -mlittle-endian -Iarch/arm/mach-pnx67xx/include -Iarch/arm/plat-pnx/include -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -Os -marm -fno-omit-frame-pointer -mapcs -mno-sched-prolog -mabi=aapcs-linux -mno-thumb-interwork -D__LINUX_ARM_ARCH__=5 -march=armv5te -mtune=arm9tdmi -msoft-float -Uarm -fno-stack-protector -fno-omit-frame-pointer -fno-optimize-sibling-calls -g -Wdeclaration-after-statement -Wno-pointer-sign -fwrapv -D"KBUILD_STR(s)=\#s" -D"KBUILD_BASENAME=KBUILD_STR(net_sysfs)" -D"KBUILD_MODNAME=KBUILD_STR(net_sysfs)" -c -o net/core/net-sysfs.o net/core/net-sysfs.c
deps_net/core/net-sysfs.o := \
net/core/net-sysfs.c \
$(wildcard include/config/sysfs.h) \
$(wildcard include/config/wireless/ext/sysfs.h) \
$(wildcard include/config/hotplug.h) \
include/linux/capability.h \
$(wildcard include/config/security/file/capabilities.h) \
include/linux/types.h \
$(wildcard include/config/uid16.h) \
$(wildcard include/config/lbd.h) \
$(wildcard include/config/phys/addr/t/64bit.h) \
$(wildcard include/config/64bit.h) \
include/linux/posix_types.h \
include/linux/stddef.h \
include/linux/compiler.h \
$(wildcard include/config/trace/branch/profiling.h) \
$(wildcard include/config/profile/all/branches.h) \
$(wildcard include/config/enable/must/check.h) \
$(wildcard include/config/enable/warn/deprecated.h) \
include/linux/compiler-gcc.h \
$(wildcard include/config/arch/supports/optimized/inlining.h) \
$(wildcard include/config/optimize/inlining.h) \
include/linux/compiler-gcc4.h \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/posix_types.h \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/types.h \
include/asm-generic/int-ll64.h \
include/linux/kernel.h \
$(wildcard include/config/preempt/voluntary.h) \
$(wildcard include/config/debug/spinlock/sleep.h) \
$(wildcard include/config/prove/locking.h) \
$(wildcard include/config/printk.h) \
$(wildcard include/config/dynamic/printk/debug.h) \
$(wildcard include/config/numa.h) \
$(wildcard include/config/ftrace/mcount/record.h) \
/data/linux/opt/arm-2008q1/bin/../lib/gcc/arm-none-linux-gnueabi/4.2.3/include/stdarg.h \
include/linux/linkage.h \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/linkage.h \
include/linux/bitops.h \
$(wildcard include/config/generic/find/first/bit.h) \
$(wildcard include/config/generic/find/last/bit.h) \
$(wildcard include/config/generic/find/next/bit.h) \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/bitops.h \
$(wildcard include/config/smp.h) \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/system.h \
$(wildcard include/config/cpu/xsc3.h) \
$(wildcard include/config/cpu/sa1100.h) \
$(wildcard include/config/cpu/sa110.h) \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/memory.h \
$(wildcard include/config/mmu.h) \
$(wildcard include/config/page/offset.h) \
$(wildcard include/config/dram/size.h) \
$(wildcard include/config/dram/base.h) \
$(wildcard include/config/zone/dma.h) \
$(wildcard include/config/discontigmem.h) \
$(wildcard include/config/sparsemem.h) \
include/linux/const.h \
arch/arm/plat-pnx/include/mach/memory.h \
$(wildcard include/config/nkernel.h) \
$(wildcard include/config/mach/pnx/realloc.h) \
$(wildcard include/config/android/pmem.h) \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/sizes.h \
include/asm-generic/memory_model.h \
$(wildcard include/config/flatmem.h) \
$(wildcard include/config/sparsemem/vmemmap.h) \
include/linux/irqflags.h \
$(wildcard include/config/trace/irqflags.h) \
$(wildcard include/config/irqsoff/tracer.h) \
$(wildcard include/config/preempt/tracer.h) \
$(wildcard include/config/trace/irqflags/support.h) \
$(wildcard include/config/x86.h) \
include/linux/typecheck.h \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/irqflags.h \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/ptrace.h \
$(wildcard include/config/arm/thumb.h) \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/hwcap.h \
include/asm/nkern.h \
$(wildcard include/config/nkernel/console.h) \
include/asm/nk/f_nk.h \
include/asm/nk/nk_f.h \
include/asm-generic/cmpxchg-local.h \
include/asm-generic/cmpxchg.h \
include/asm-generic/bitops/non-atomic.h \
include/asm-generic/bitops/fls64.h \
include/asm-generic/bitops/sched.h \
include/asm-generic/bitops/hweight.h \
include/asm-generic/bitops/lock.h \
include/linux/log2.h \
$(wildcard include/config/arch/has/ilog2/u32.h) \
$(wildcard include/config/arch/has/ilog2/u64.h) \
include/linux/ratelimit.h \
include/linux/param.h \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/param.h \
$(wildcard include/config/hz.h) \
include/linux/dynamic_printk.h \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/byteorder.h \
include/linux/byteorder/little_endian.h \
include/linux/swab.h \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/swab.h \
include/linux/byteorder/generic.h \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/bug.h \
$(wildcard include/config/bug.h) \
$(wildcard include/config/debug/bugverbose.h) \
include/asm-generic/bug.h \
$(wildcard include/config/generic/bug.h) \
$(wildcard include/config/generic/bug/relative/pointers.h) \
include/linux/netdevice.h \
$(wildcard include/config/dcb.h) \
$(wildcard include/config/wlan/80211.h) \
$(wildcard include/config/ax25.h) \
$(wildcard include/config/mac80211/mesh.h) \
$(wildcard include/config/tr.h) \
$(wildcard include/config/net/ipip.h) \
$(wildcard include/config/net/ipgre.h) \
$(wildcard include/config/ipv6/sit.h) \
$(wildcard include/config/ipv6/tunnel.h) \
$(wildcard include/config/netpoll.h) \
$(wildcard include/config/net/poll/controller.h) \
$(wildcard include/config/wireless/ext.h) \
$(wildcard include/config/net/dsa.h) \
$(wildcard include/config/net/ns.h) \
$(wildcard include/config/compat/net/dev/ops.h) \
$(wildcard include/config/net/dsa/tag/dsa.h) \
$(wildcard include/config/net/dsa/tag/trailer.h) \
$(wildcard include/config/netpoll/trap.h) \
$(wildcard include/config/proc/fs.h) \
include/linux/if.h \
include/linux/socket.h \
$(wildcard include/config/compat.h) \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/socket.h \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/sockios.h \
include/linux/sockios.h \
include/linux/uio.h \
include/linux/hdlc/ioctl.h \
include/linux/if_ether.h \
$(wildcard include/config/sysctl.h) \
include/linux/skbuff.h \
$(wildcard include/config/nf/conntrack.h) \
$(wildcard include/config/bridge/netfilter.h) \
$(wildcard include/config/has/dma.h) \
$(wildcard include/config/xfrm.h) \
$(wildcard include/config/net/sched.h) \
$(wildcard include/config/net/cls/act.h) \
$(wildcard include/config/ipv6/ndisc/nodetype.h) \
$(wildcard include/config/mac80211.h) \
$(wildcard include/config/net/dma.h) \
$(wildcard include/config/network/secmark.h) \
include/linux/time.h \
include/linux/cache.h \
$(wildcard include/config/arch/has/cache/line/size.h) \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/cache.h \
$(wildcard include/config/arm/l1/cache/shift.h) \
$(wildcard include/config/aeabi.h) \
include/linux/seqlock.h \
include/linux/spinlock.h \
$(wildcard include/config/debug/spinlock.h) \
$(wildcard include/config/generic/lockbreak.h) \
$(wildcard include/config/preempt.h) \
$(wildcard include/config/debug/lock/alloc.h) \
include/linux/preempt.h \
$(wildcard include/config/debug/preempt.h) \
$(wildcard include/config/preempt/notifiers.h) \
include/linux/thread_info.h \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/thread_info.h \
$(wildcard include/config/arm/thumbee.h) \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/fpstate.h \
$(wildcard include/config/vfpv3.h) \
$(wildcard include/config/iwmmxt.h) \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/domain.h \
$(wildcard include/config/io/36.h) \
include/linux/list.h \
$(wildcard include/config/debug/list.h) \
include/linux/poison.h \
include/linux/prefetch.h \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/processor.h \
include/linux/stringify.h \
include/linux/bottom_half.h \
include/linux/spinlock_types.h \
include/linux/spinlock_types_up.h \
include/linux/lockdep.h \
$(wildcard include/config/lockdep.h) \
$(wildcard include/config/lock/stat.h) \
$(wildcard include/config/generic/hardirqs.h) \
include/linux/spinlock_up.h \
include/linux/spinlock_api_up.h \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/atomic.h \
include/asm-generic/atomic.h \
include/linux/math64.h \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/div64.h \
include/linux/net.h \
include/linux/random.h \
include/linux/ioctl.h \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/ioctl.h \
include/asm-generic/ioctl.h \
include/linux/irqnr.h \
include/linux/wait.h \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/current.h \
include/linux/fcntl.h \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/fcntl.h \
include/asm-generic/fcntl.h \
include/linux/sysctl.h \
include/linux/textsearch.h \
include/linux/module.h \
$(wildcard include/config/modules.h) \
$(wildcard include/config/modversions.h) \
$(wildcard include/config/unused/symbols.h) \
$(wildcard include/config/kallsyms.h) \
$(wildcard include/config/markers.h) \
$(wildcard include/config/tracepoints.h) \
$(wildcard include/config/module/unload.h) \
include/linux/stat.h \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/stat.h \
include/linux/kmod.h \
include/linux/gfp.h \
$(wildcard include/config/zone/dma32.h) \
$(wildcard include/config/highmem.h) \
include/linux/mmzone.h \
$(wildcard include/config/force/max/zoneorder.h) \
$(wildcard include/config/unevictable/lru.h) \
$(wildcard include/config/memory/hotplug.h) \
$(wildcard include/config/arch/populates/node/map.h) \
$(wildcard include/config/flat/node/mem/map.h) \
$(wildcard include/config/cgroup/mem/res/ctlr.h) \
$(wildcard include/config/have/memory/present.h) \
$(wildcard include/config/need/node/memmap/size.h) \
$(wildcard include/config/need/multiple/nodes.h) \
$(wildcard include/config/have/arch/early/pfn/to/nid.h) \
$(wildcard include/config/sparsemem/extreme.h) \
$(wildcard include/config/nodes/span/other/nodes.h) \
$(wildcard include/config/holes/in/zone.h) \
include/linux/threads.h \
$(wildcard include/config/nr/cpus.h) \
$(wildcard include/config/base/small.h) \
include/linux/numa.h \
$(wildcard include/config/nodes/shift.h) \
include/linux/init.h \
include/linux/nodemask.h \
include/linux/bitmap.h \
include/linux/string.h \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/string.h \
include/linux/pageblock-flags.h \
$(wildcard include/config/hugetlb/page.h) \
$(wildcard include/config/hugetlb/page/size/variable.h) \
include/linux/bounds.h \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/page.h \
$(wildcard include/config/cpu/copy/v3.h) \
$(wildcard include/config/cpu/copy/v4wt.h) \
$(wildcard include/config/cpu/copy/v4wb.h) \
$(wildcard include/config/cpu/copy/feroceon.h) \
$(wildcard include/config/cpu/xscale.h) \
$(wildcard include/config/cpu/copy/v6.h) \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/glue.h \
$(wildcard include/config/cpu/arm610.h) \
$(wildcard include/config/cpu/arm710.h) \
$(wildcard include/config/cpu/abrt/lv4t.h) \
$(wildcard include/config/cpu/abrt/ev4.h) \
$(wildcard include/config/cpu/abrt/ev4t.h) \
$(wildcard include/config/cpu/abrt/ev5tj.h) \
$(wildcard include/config/cpu/abrt/ev5t.h) \
$(wildcard include/config/cpu/abrt/ev6.h) \
$(wildcard include/config/cpu/abrt/ev7.h) \
$(wildcard include/config/cpu/pabrt/ifar.h) \
$(wildcard include/config/cpu/pabrt/noifar.h) \
include/asm-generic/page.h \
include/linux/memory_hotplug.h \
$(wildcard include/config/have/arch/nodedata/extension.h) \
$(wildcard include/config/memory/hotremove.h) \
include/linux/notifier.h \
include/linux/errno.h \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/errno.h \
include/asm-generic/errno.h \
include/asm-generic/errno-base.h \
include/linux/mutex.h \
$(wildcard include/config/debug/mutexes.h) \
include/linux/mutex-debug.h \
include/linux/rwsem.h \
$(wildcard include/config/rwsem/generic/spinlock.h) \
include/linux/rwsem-spinlock.h \
include/linux/srcu.h \
include/linux/topology.h \
$(wildcard include/config/sched/smt.h) \
$(wildcard include/config/sched/mc.h) \
include/linux/cpumask.h \
$(wildcard include/config/disable/obsolete/cpumask/functions.h) \
$(wildcard include/config/hotplug/cpu.h) \
$(wildcard include/config/cpumask/offstack.h) \
$(wildcard include/config/debug/per/cpu/maps.h) \
include/linux/smp.h \
$(wildcard include/config/use/generic/smp/helpers.h) \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/topology.h \
include/asm-generic/topology.h \
include/linux/elf.h \
include/linux/elf-em.h \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/elf.h \
$(wildcard include/config/gcov/profile.h) \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/user.h \
include/linux/kobject.h \
include/linux/sysfs.h \
include/linux/kref.h \
include/linux/moduleparam.h \
$(wildcard include/config/alpha.h) \
$(wildcard include/config/ia64.h) \
$(wildcard include/config/ppc64.h) \
include/linux/marker.h \
include/linux/tracepoint.h \
include/linux/rcupdate.h \
$(wildcard include/config/classic/rcu.h) \
$(wildcard include/config/tree/rcu.h) \
$(wildcard include/config/preempt/rcu.h) \
include/linux/percpu.h \
include/linux/slab.h \
$(wildcard include/config/slab/debug.h) \
$(wildcard include/config/debug/objects.h) \
$(wildcard include/config/slub.h) \
$(wildcard include/config/slob.h) \
$(wildcard include/config/debug/slab.h) \
include/linux/slub_def.h \
$(wildcard include/config/slub/stats.h) \
$(wildcard include/config/slub/debug.h) \
include/linux/workqueue.h \
include/linux/timer.h \
$(wildcard include/config/timer/stats.h) \
$(wildcard include/config/debug/objects/timers.h) \
include/linux/ktime.h \
$(wildcard include/config/ktime/scalar.h) \
include/linux/jiffies.h \
include/linux/timex.h \
$(wildcard include/config/no/hz.h) \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/timex.h \
arch/arm/plat-pnx/include/mach/timex.h \
include/linux/debugobjects.h \
$(wildcard include/config/debug/objects/free.h) \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/percpu.h \
include/asm-generic/percpu.h \
$(wildcard include/config/have/setup/per/cpu/area.h) \
include/linux/completion.h \
include/linux/rcuclassic.h \
$(wildcard include/config/rcu/cpu/stall/detector.h) \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/local.h \
include/asm-generic/local.h \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/module.h \
include/linux/err.h \
include/net/checksum.h \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/uaccess.h \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/checksum.h \
include/linux/in6.h \
include/linux/dmaengine.h \
$(wildcard include/config/dma/engine.h) \
include/linux/device.h \
$(wildcard include/config/debug/devres.h) \
include/linux/ioport.h \
include/linux/klist.h \
include/linux/pm.h \
$(wildcard include/config/pm/sleep.h) \
include/linux/semaphore.h \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/device.h \
$(wildcard include/config/dmabounce.h) \
include/linux/pm_wakeup.h \
$(wildcard include/config/pm.h) \
include/linux/dma-mapping.h \
$(wildcard include/config/have/dma/attrs.h) \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/dma-mapping.h \
include/linux/mm_types.h \
$(wildcard include/config/split/ptlock/cpus.h) \
$(wildcard include/config/mm/owner.h) \
$(wildcard include/config/mmu/notifier.h) \
include/linux/auxvec.h \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/auxvec.h \
include/linux/prio_tree.h \
include/linux/rbtree.h \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/mmu.h \
$(wildcard include/config/cpu/has/asid.h) \
include/linux/scatterlist.h \
$(wildcard include/config/debug/sg.h) \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/scatterlist.h \
include/linux/mm.h \
$(wildcard include/config/stack/growsup.h) \
$(wildcard include/config/swap.h) \
$(wildcard include/config/shmem.h) \
$(wildcard include/config/debug/pagealloc.h) \
$(wildcard include/config/hibernation.h) \
include/linux/mmdebug.h \
$(wildcard include/config/debug/vm.h) \
$(wildcard include/config/debug/virtual.h) \
include/linux/debug_locks.h \
$(wildcard include/config/debug/locking/api/selftests.h) \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/pgtable.h \
include/asm-generic/4level-fixup.h \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/proc-fns.h \
$(wildcard include/config/cpu/32.h) \
$(wildcard include/config/cpu/arm7tdmi.h) \
$(wildcard include/config/cpu/arm720t.h) \
$(wildcard include/config/cpu/arm740t.h) \
$(wildcard include/config/cpu/arm9tdmi.h) \
$(wildcard include/config/cpu/arm920t.h) \
$(wildcard include/config/cpu/arm922t.h) \
$(wildcard include/config/cpu/arm925t.h) \
$(wildcard include/config/cpu/arm926t.h) \
$(wildcard include/config/cpu/arm940t.h) \
$(wildcard include/config/cpu/arm946e.h) \
$(wildcard include/config/cpu/arm1020.h) \
$(wildcard include/config/cpu/arm1020e.h) \
$(wildcard include/config/cpu/arm1022.h) \
$(wildcard include/config/cpu/arm1026.h) \
$(wildcard include/config/cpu/feroceon.h) \
$(wildcard include/config/cpu/v6.h) \
$(wildcard include/config/cpu/v7.h) \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/cpu-single.h \
arch/arm/plat-pnx/include/mach/vmalloc.h \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/pgtable-hwdef.h \
include/asm-generic/pgtable.h \
include/linux/page-flags.h \
$(wildcard include/config/pageflags/extended.h) \
$(wildcard include/config/ia64/uncached/allocator.h) \
$(wildcard include/config/s390.h) \
include/linux/vmstat.h \
$(wildcard include/config/vm/event/counters.h) \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/io.h \
arch/arm/plat-pnx/include/mach/io.h \
arch/arm/plat-pnx/include/mach/hardware.h \
$(wildcard include/config/vaddr.h) \
arch/arm/plat-pnx/include/mach/cpu.h \
$(wildcard include/config/arch/pnx67xx.h) \
$(wildcard include/config/arch/pnx67xx/v2.h) \
$(wildcard include/config/arch/pnx6708.h) \
$(wildcard include/config/arch/pnx6711.h) \
$(wildcard include/config/arch/pnx6712.h) \
arch/arm/plat-pnx/include/mach/regs-pnx67xx.h \
$(wildcard include/config/offset.h) \
$(wildcard include/config/reg.h) \
$(wildcard include/config/value.h) \
include/asm-generic/dma-coherent.h \
$(wildcard include/config/have/generic/dma/coherent.h) \
include/linux/hrtimer.h \
$(wildcard include/config/high/res/timers.h) \
include/linux/if_packet.h \
include/linux/delay.h \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/delay.h \
include/net/net_namespace.h \
$(wildcard include/config/ipv6.h) \
$(wildcard include/config/ip/dccp.h) \
$(wildcard include/config/netfilter.h) \
$(wildcard include/config/net.h) \
include/net/netns/core.h \
include/net/netns/mib.h \
$(wildcard include/config/xfrm/statistics.h) \
include/net/snmp.h \
include/linux/snmp.h \
include/net/netns/unix.h \
include/net/netns/packet.h \
include/net/netns/ipv4.h \
$(wildcard include/config/ip/multiple/tables.h) \
include/net/inet_frag.h \
include/net/netns/ipv6.h \
$(wildcard include/config/ipv6/multiple/tables.h) \
$(wildcard include/config/ipv6/mroute.h) \
$(wildcard include/config/ipv6/pimsm/v2.h) \
include/net/netns/dccp.h \
include/net/netns/x_tables.h \
include/linux/netfilter.h \
$(wildcard include/config/netfilter/debug.h) \
$(wildcard include/config/nf/nat/needed.h) \
include/linux/in.h \
include/net/flow.h \
include/linux/proc_fs.h \
$(wildcard include/config/proc/devicetree.h) \
$(wildcard include/config/proc/kcore.h) \
include/linux/fs.h \
$(wildcard include/config/dnotify.h) \
$(wildcard include/config/quota.h) \
$(wildcard include/config/inotify.h) \
$(wildcard include/config/security.h) \
$(wildcard include/config/epoll.h) \
$(wildcard include/config/debug/writecount.h) \
$(wildcard include/config/file/locking.h) \
$(wildcard include/config/auditsyscall.h) \
$(wildcard include/config/block.h) \
$(wildcard include/config/fs/xip.h) \
$(wildcard include/config/migration.h) \
include/linux/limits.h \
include/linux/kdev_t.h \
include/linux/dcache.h \
include/linux/rculist.h \
include/linux/path.h \
include/linux/radix-tree.h \
include/linux/pid.h \
include/linux/fiemap.h \
include/linux/quota.h \
include/linux/dqblk_xfs.h \
include/linux/dqblk_v1.h \
include/linux/dqblk_v2.h \
include/linux/dqblk_qtree.h \
include/linux/nfs_fs_i.h \
include/linux/nfs.h \
include/linux/sunrpc/msg_prot.h \
include/linux/magic.h \
include/net/netns/conntrack.h \
$(wildcard include/config/nf/conntrack/events.h) \
include/net/netns/xfrm.h \
include/linux/xfrm.h \
include/linux/seq_file_net.h \
include/linux/seq_file.h \
include/net/dsa.h \
include/linux/interrupt.h \
$(wildcard include/config/generic/irq/probe.h) \
include/linux/irqreturn.h \
include/linux/hardirq.h \
$(wildcard include/config/virt/cpu/accounting.h) \
include/linux/smp_lock.h \
$(wildcard include/config/lock/kernel.h) \
include/linux/sched.h \
$(wildcard include/config/sched/debug.h) \
$(wildcard include/config/detect/softlockup.h) \
$(wildcard include/config/core/dump/default/elf/headers.h) \
$(wildcard include/config/bsd/process/acct.h) \
$(wildcard include/config/taskstats.h) \
$(wildcard include/config/audit.h) \
$(wildcard include/config/inotify/user.h) \
$(wildcard include/config/posix/mqueue.h) \
$(wildcard include/config/keys.h) \
$(wildcard include/config/user/sched.h) \
$(wildcard include/config/schedstats.h) \
$(wildcard include/config/task/delay/acct.h) \
$(wildcard include/config/fair/group/sched.h) \
$(wildcard include/config/rt/group/sched.h) \
$(wildcard include/config/blk/dev/io/trace.h) \
$(wildcard include/config/cc/stackprotector.h) \
$(wildcard include/config/x86/ptrace/bts.h) \
$(wildcard include/config/sysvipc.h) \
$(wildcard include/config/rt/mutexes.h) \
$(wildcard include/config/task/xacct.h) \
$(wildcard include/config/cpusets.h) \
$(wildcard include/config/cgroups.h) \
$(wildcard include/config/futex.h) \
$(wildcard include/config/fault/injection.h) \
$(wildcard include/config/latencytop.h) \
$(wildcard include/config/function/graph/tracer.h) \
$(wildcard include/config/tracing.h) \
$(wildcard include/config/have/unstable/sched/clock.h) \
$(wildcard include/config/preempt/bkl.h) \
$(wildcard include/config/group/sched.h) \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/cputime.h \
include/asm-generic/cputime.h \
include/linux/sem.h \
include/linux/ipc.h \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/ipcbuf.h \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/sembuf.h \
include/linux/signal.h \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/signal.h \
include/asm-generic/signal.h \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/sigcontext.h \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/siginfo.h \
include/asm-generic/siginfo.h \
include/linux/fs_struct.h \
include/linux/proportions.h \
include/linux/percpu_counter.h \
include/linux/seccomp.h \
$(wildcard include/config/seccomp.h) \
include/linux/rtmutex.h \
$(wildcard include/config/debug/rt/mutexes.h) \
include/linux/plist.h \
$(wildcard include/config/debug/pi/list.h) \
include/linux/resource.h \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/resource.h \
include/asm-generic/resource.h \
include/linux/task_io_accounting.h \
$(wildcard include/config/task/io/accounting.h) \
include/linux/latencytop.h \
include/linux/cred.h \
include/linux/key.h \
include/linux/aio.h \
$(wildcard include/config/aio.h) \
include/linux/aio_abi.h \
include/linux/ftrace_irq.h \
$(wildcard include/config/dynamic/ftrace.h) \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/hardirq.h \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/irq.h \
arch/arm/plat-pnx/include/mach/irqs.h \
include/linux/irq_cpustat.h \
include/linux/if_arp.h \
include/net/sock.h \
include/linux/list_nulls.h \
include/linux/security.h \
$(wildcard include/config/security/path.h) \
$(wildcard include/config/security/network.h) \
$(wildcard include/config/security/network/xfrm.h) \
$(wildcard include/config/securityfs.h) \
include/linux/binfmts.h \
include/linux/shm.h \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/shmparam.h \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/shmbuf.h \
include/linux/msg.h \
/data/embedded/acer/acergit/linux/arch/arm/include/asm/msgbuf.h \
include/linux/filter.h \
include/linux/rculist_nulls.h \
include/net/dst.h \
$(wildcard include/config/net/cls/route.h) \
include/linux/rtnetlink.h \
include/linux/netlink.h \
include/linux/if_link.h \
include/linux/if_addr.h \
include/linux/neighbour.h \
include/net/neighbour.h \
include/net/rtnetlink.h \
include/net/netlink.h \
include/linux/wireless.h \
include/net/iw_handler.h \
net/core/net-sysfs.h \
net/core/net-sysfs.o: $(deps_net/core/net-sysfs.o)
$(deps_net/core/net-sysfs.o):
| yohanes/Acer-BeTouch-E130-Linux-Kernel | net/core/.net-sysfs.o.cmd | bat | gpl-2.0 | 27,097 |
cmd_printutils/lpr.o := arm-linux-musleabihf-gcc -Wp,-MD,printutils/.lpr.o.d -std=gnu99 -Iinclude -Ilibbb -include include/autoconf.h -D_GNU_SOURCE -DNDEBUG -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D"BB_VER=KBUILD_STR(1.22.1)" -DBB_BT=AUTOCONF_TIMESTAMP -Wall -Wshadow -Wwrite-strings -Wundef -Wstrict-prototypes -Wunused-function -Wunused-value -Wmissing-prototypes -Wmissing-declarations -Wno-format-security -Wdeclaration-after-statement -Wold-style-definition -fno-builtin-strlen -finline-limit=0 -fomit-frame-pointer -ffunction-sections -fdata-sections -fno-guess-branch-probability -funsigned-char -static-libgcc -falign-functions=1 -falign-jumps=1 -falign-labels=1 -falign-loops=1 -fno-unwind-tables -fno-asynchronous-unwind-tables -g -O0 -D"KBUILD_STR(s)=\#s" -D"KBUILD_BASENAME=KBUILD_STR(lpr)" -D"KBUILD_MODNAME=KBUILD_STR(lpr)" -c -o printutils/lpr.o printutils/lpr.c
deps_printutils/lpr.o := \
printutils/lpr.c \
include/libbb.h \
$(wildcard include/config/feature/shadowpasswds.h) \
$(wildcard include/config/use/bb/shadow.h) \
$(wildcard include/config/selinux.h) \
$(wildcard include/config/feature/utmp.h) \
$(wildcard include/config/locale/support.h) \
$(wildcard include/config/use/bb/pwd/grp.h) \
$(wildcard include/config/lfs.h) \
$(wildcard include/config/feature/buffers/go/on/stack.h) \
$(wildcard include/config/feature/buffers/go/in/bss.h) \
$(wildcard include/config/feature/ipv6.h) \
$(wildcard include/config/feature/seamless/xz.h) \
$(wildcard include/config/feature/seamless/lzma.h) \
$(wildcard include/config/feature/seamless/bz2.h) \
$(wildcard include/config/feature/seamless/gz.h) \
$(wildcard include/config/feature/seamless/z.h) \
$(wildcard include/config/feature/check/names.h) \
$(wildcard include/config/feature/prefer/applets.h) \
$(wildcard include/config/long/opts.h) \
$(wildcard include/config/feature/getopt/long.h) \
$(wildcard include/config/feature/pidfile.h) \
$(wildcard include/config/feature/syslog.h) \
$(wildcard include/config/feature/individual.h) \
$(wildcard include/config/echo.h) \
$(wildcard include/config/printf.h) \
$(wildcard include/config/test.h) \
$(wildcard include/config/kill.h) \
$(wildcard include/config/chown.h) \
$(wildcard include/config/ls.h) \
$(wildcard include/config/xxx.h) \
$(wildcard include/config/route.h) \
$(wildcard include/config/feature/hwib.h) \
$(wildcard include/config/desktop.h) \
$(wildcard include/config/feature/crond/d.h) \
$(wildcard include/config/use/bb/crypt.h) \
$(wildcard include/config/feature/adduser/to/group.h) \
$(wildcard include/config/feature/del/user/from/group.h) \
$(wildcard include/config/ioctl/hex2str/error.h) \
$(wildcard include/config/feature/editing.h) \
$(wildcard include/config/feature/editing/history.h) \
$(wildcard include/config/feature/editing/savehistory.h) \
$(wildcard include/config/feature/tab/completion.h) \
$(wildcard include/config/feature/username/completion.h) \
$(wildcard include/config/feature/editing/vi.h) \
$(wildcard include/config/feature/editing/save/on/exit.h) \
$(wildcard include/config/pmap.h) \
$(wildcard include/config/feature/show/threads.h) \
$(wildcard include/config/feature/ps/additional/columns.h) \
$(wildcard include/config/feature/topmem.h) \
$(wildcard include/config/feature/top/smp/process.h) \
$(wildcard include/config/killall.h) \
$(wildcard include/config/pgrep.h) \
$(wildcard include/config/pkill.h) \
$(wildcard include/config/pidof.h) \
$(wildcard include/config/sestatus.h) \
$(wildcard include/config/unicode/support.h) \
$(wildcard include/config/feature/mtab/support.h) \
$(wildcard include/config/feature/clean/up.h) \
$(wildcard include/config/feature/devfs.h) \
include/platform.h \
$(wildcard include/config/werror.h) \
$(wildcard include/config/big/endian.h) \
$(wildcard include/config/little/endian.h) \
$(wildcard include/config/nommu.h) \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/limits.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/features.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/bits/limits.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/byteswap.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/stdint.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/bits/alltypes.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/bits/stdint.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/endian.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/stdbool.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/unistd.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/bits/posix.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/ctype.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/dirent.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/errno.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/bits/errno.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/fcntl.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/bits/fcntl.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/inttypes.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/netdb.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/netinet/in.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/sys/socket.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/bits/socket.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/setjmp.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/bits/setjmp.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/signal.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/bits/signal.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/stdio.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/stdlib.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/alloca.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/stdarg.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/stddef.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/string.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/strings.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/libgen.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/poll.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/sys/ioctl.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/bits/ioctl.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/sys/mman.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/bits/mman.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/sys/stat.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/bits/stat.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/sys/time.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/sys/select.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/sys/types.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/sys/sysmacros.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/sys/wait.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/sys/resource.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/bits/resource.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/termios.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/bits/termios.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/time.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/sys/param.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/pwd.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/grp.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/mntent.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/sys/statfs.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/sys/statvfs.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/bits/statfs.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/utmp.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/utmpx.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/locale.h \
/Volumes/ELFSOSX/tools/lib/gcc/arm-linux-musleabihf/4.7.3/../../../../arm-linux-musleabihf/include/arpa/inet.h \
include/pwd_.h \
include/grp_.h \
include/shadow_.h \
include/xatonum.h \
printutils/lpr.o: $(deps_printutils/lpr.o)
$(deps_printutils/lpr.o):
| ThinkIntegrate/busybox | printutils/.lpr.o.cmd | bat | gpl-2.0 | 11,340 |
cmd_arch/arm/lib/strrchr.o := arm-linux-gnueabi-gcc -Wp,-MD,arch/arm/lib/.strrchr.o.d -nostdinc -isystem /usr/lib/gcc-cross/arm-linux-gnueabi/4.7/include -Iinclude -I/home/benoit/kernel_android/32/es209ra/arch/arm/include -include include/linux/autoconf.h -D__KERNEL__ -mlittle-endian -Iarch/arm/mach-msm/include -D__ASSEMBLY__ -mabi=aapcs-linux -mno-thumb-interwork -funwind-tables -D__LINUX_ARM_ARCH__=7 -march=armv7-a -include asm/unified.h -msoft-float -gdwarf-2 -c -o arch/arm/lib/strrchr.o arch/arm/lib/strrchr.S
deps_arch/arm/lib/strrchr.o := \
arch/arm/lib/strrchr.S \
/home/benoit/kernel_android/32/es209ra/arch/arm/include/asm/unified.h \
$(wildcard include/config/arm/asm/unified.h) \
$(wildcard include/config/thumb2/kernel.h) \
include/linux/linkage.h \
include/linux/compiler.h \
$(wildcard include/config/trace/branch/profiling.h) \
$(wildcard include/config/profile/all/branches.h) \
$(wildcard include/config/enable/must/check.h) \
$(wildcard include/config/enable/warn/deprecated.h) \
/home/benoit/kernel_android/32/es209ra/arch/arm/include/asm/linkage.h \
/home/benoit/kernel_android/32/es209ra/arch/arm/include/asm/assembler.h \
$(wildcard include/config/cpu/feroceon.h) \
$(wildcard include/config/trace/irqflags.h) \
$(wildcard include/config/smp.h) \
/home/benoit/kernel_android/32/es209ra/arch/arm/include/asm/ptrace.h \
$(wildcard include/config/cpu/endian/be8.h) \
$(wildcard include/config/arm/thumb.h) \
/home/benoit/kernel_android/32/es209ra/arch/arm/include/asm/hwcap.h \
arch/arm/lib/strrchr.o: $(deps_arch/arm/lib/strrchr.o)
$(deps_arch/arm/lib/strrchr.o):
| b8e5n/KTG-kernel_es209ra | arch/arm/lib/.strrchr.o.cmd | bat | gpl-2.0 | 1,662 |
cmd_mm/fadvise.o := arm-eabi-gcc -Wp,-MD,mm/.fadvise.o.d -nostdinc -isystem /usr/bin/../lib/gcc/arm-eabi/4.5.0/include -Iinclude -I/home/jacob/source/wildfire-kernel/arch/arm/include -include include/linux/autoconf.h -D__KERNEL__ -mlittle-endian -Iarch/arm/mach-msm/include -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -Os -marm -fno-omit-frame-pointer -mapcs -mno-sched-prolog -mabi=aapcs-linux -mno-thumb-interwork -D__LINUX_ARM_ARCH__=6 -march=armv6 -mtune=arm1136j-s -msoft-float -Uarm -Wframe-larger-than=1024 -fno-stack-protector -fno-omit-frame-pointer -fno-optimize-sibling-calls -g -Wdeclaration-after-statement -Wno-pointer-sign -fwrapv -fno-dwarf2-cfi-asm -D"KBUILD_STR(s)=\#s" -D"KBUILD_BASENAME=KBUILD_STR(fadvise)" -D"KBUILD_MODNAME=KBUILD_STR(fadvise)" -c -o mm/fadvise.o mm/fadvise.c
deps_mm/fadvise.o := \
mm/fadvise.c \
$(wildcard include/config/have/syscall/wrappers.h) \
include/linux/kernel.h \
$(wildcard include/config/lbd.h) \
$(wildcard include/config/preempt/voluntary.h) \
$(wildcard include/config/debug/spinlock/sleep.h) \
$(wildcard include/config/prove/locking.h) \
$(wildcard include/config/printk.h) \
$(wildcard include/config/dynamic/printk/debug.h) \
$(wildcard include/config/numa.h) \
$(wildcard include/config/ftrace/mcount/record.h) \
/usr/bin/../lib/gcc/arm-eabi/4.5.0/include/stdarg.h \
include/linux/linkage.h \
include/linux/compiler.h \
$(wildcard include/config/trace/branch/profiling.h) \
$(wildcard include/config/profile/all/branches.h) \
$(wildcard include/config/enable/must/check.h) \
$(wildcard include/config/enable/warn/deprecated.h) \
include/linux/compiler-gcc.h \
$(wildcard include/config/arch/supports/optimized/inlining.h) \
$(wildcard include/config/optimize/inlining.h) \
include/linux/compiler-gcc4.h \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/linkage.h \
include/linux/stddef.h \
include/linux/types.h \
$(wildcard include/config/uid16.h) \
$(wildcard include/config/phys/addr/t/64bit.h) \
$(wildcard include/config/64bit.h) \
include/linux/posix_types.h \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/posix_types.h \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/types.h \
include/asm-generic/int-ll64.h \
include/linux/bitops.h \
$(wildcard include/config/generic/find/first/bit.h) \
$(wildcard include/config/generic/find/last/bit.h) \
$(wildcard include/config/generic/find/next/bit.h) \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/bitops.h \
$(wildcard include/config/smp.h) \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/system.h \
$(wildcard include/config/cpu/xsc3.h) \
$(wildcard include/config/cpu/sa1100.h) \
$(wildcard include/config/cpu/sa110.h) \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/memory.h \
$(wildcard include/config/mmu.h) \
$(wildcard include/config/page/offset.h) \
$(wildcard include/config/dram/size.h) \
$(wildcard include/config/dram/base.h) \
$(wildcard include/config/zone/dma.h) \
$(wildcard include/config/discontigmem.h) \
include/linux/const.h \
arch/arm/mach-msm/include/mach/memory.h \
$(wildcard include/config/arch/qsd8x50.h) \
$(wildcard include/config/arch/msm7225.h) \
$(wildcard include/config/arch/msm7200a.h) \
$(wildcard include/config/arch/msm7201a.h) \
$(wildcard include/config/arch/msm7x00a.h) \
$(wildcard include/config/mach/desirec.h) \
$(wildcard include/config/arch/msm7227.h) \
$(wildcard include/config/arch/msm/arm11.h) \
$(wildcard include/config/cache/l2x0.h) \
$(wildcard include/config/arch/msm/scorpion.h) \
include/asm/mach-types.h \
$(wildcard include/config/arch/ebsa110.h) \
$(wildcard include/config/arch/rpc.h) \
$(wildcard include/config/arch/nexuspci.h) \
$(wildcard include/config/arch/ebsa285.h) \
$(wildcard include/config/arch/netwinder.h) \
$(wildcard include/config/arch/cats.h) \
$(wildcard include/config/arch/tbox.h) \
$(wildcard include/config/arch/co285.h) \
$(wildcard include/config/arch/clps7110.h) \
$(wildcard include/config/arch/arc.h) \
$(wildcard include/config/arch/a5k.h) \
$(wildcard include/config/arch/etoile.h) \
$(wildcard include/config/arch/lacie/nas.h) \
$(wildcard include/config/arch/clps7500.h) \
$(wildcard include/config/arch/shark.h) \
$(wildcard include/config/sa1100/brutus.h) \
$(wildcard include/config/arch/personal/server.h) \
$(wildcard include/config/sa1100/itsy.h) \
$(wildcard include/config/arch/l7200.h) \
$(wildcard include/config/sa1100/pleb.h) \
$(wildcard include/config/arch/integrator.h) \
$(wildcard include/config/sa1100/h3600.h) \
$(wildcard include/config/arch/ixp1200.h) \
$(wildcard include/config/arch/p720t.h) \
$(wildcard include/config/sa1100/assabet.h) \
$(wildcard include/config/sa1100/victor.h) \
$(wildcard include/config/sa1100/lart.h) \
$(wildcard include/config/sa1100/ranger.h) \
$(wildcard include/config/sa1100/graphicsclient.h) \
$(wildcard include/config/sa1100/xp860.h) \
$(wildcard include/config/sa1100/cerf.h) \
$(wildcard include/config/sa1100/nanoengine.h) \
$(wildcard include/config/sa1100/fpic.h) \
$(wildcard include/config/sa1100/extenex1.h) \
$(wildcard include/config/sa1100/sherman.h) \
$(wildcard include/config/sa1100/accelent.h) \
$(wildcard include/config/arch/l7200/accelent.h) \
$(wildcard include/config/sa1100/netport.h) \
$(wildcard include/config/sa1100/pangolin.h) \
$(wildcard include/config/sa1100/yopy.h) \
$(wildcard include/config/sa1100/coolidge.h) \
$(wildcard include/config/sa1100/huw/webpanel.h) \
$(wildcard include/config/arch/spotme.h) \
$(wildcard include/config/arch/freebird.h) \
$(wildcard include/config/arch/ti925.h) \
$(wildcard include/config/arch/riscstation.h) \
$(wildcard include/config/sa1100/cavy.h) \
$(wildcard include/config/sa1100/jornada720.h) \
$(wildcard include/config/sa1100/omnimeter.h) \
$(wildcard include/config/arch/edb7211.h) \
$(wildcard include/config/sa1100/citygo.h) \
$(wildcard include/config/sa1100/pfs168.h) \
$(wildcard include/config/sa1100/spot.h) \
$(wildcard include/config/sa1100/flexanet.h) \
$(wildcard include/config/arch/webpal.h) \
$(wildcard include/config/sa1100/linpda.h) \
$(wildcard include/config/arch/anakin.h) \
$(wildcard include/config/sa1100/mvi.h) \
$(wildcard include/config/sa1100/jupiter.h) \
$(wildcard include/config/arch/psionw.h) \
$(wildcard include/config/sa1100/aln.h) \
$(wildcard include/config/arch/camelot.h) \
$(wildcard include/config/sa1100/gds2200.h) \
$(wildcard include/config/sa1100/psion/series7.h) \
$(wildcard include/config/sa1100/xfile.h) \
$(wildcard include/config/arch/accelent/ep9312.h) \
$(wildcard include/config/arch/ic200.h) \
$(wildcard include/config/sa1100/creditlart.h) \
$(wildcard include/config/sa1100/htm.h) \
$(wildcard include/config/arch/iq80310.h) \
$(wildcard include/config/sa1100/freebot.h) \
$(wildcard include/config/arch/entel.h) \
$(wildcard include/config/arch/enp3510.h) \
$(wildcard include/config/sa1100/trizeps.h) \
$(wildcard include/config/sa1100/nesa.h) \
$(wildcard include/config/arch/venus.h) \
$(wildcard include/config/arch/tardis.h) \
$(wildcard include/config/arch/mercury.h) \
$(wildcard include/config/sa1100/empeg.h) \
$(wildcard include/config/arch/i80200fcc.h) \
$(wildcard include/config/sa1100/itt/cpb.h) \
$(wildcard include/config/sa1100/svc.h) \
$(wildcard include/config/sa1100/alpha2.h) \
$(wildcard include/config/sa1100/alpha1.h) \
$(wildcard include/config/arch/netarm.h) \
$(wildcard include/config/sa1100/simpad.h) \
$(wildcard include/config/arch/pda1.h) \
$(wildcard include/config/arch/lubbock.h) \
$(wildcard include/config/arch/aniko.h) \
$(wildcard include/config/arch/clep7212.h) \
$(wildcard include/config/arch/cs89712.h) \
$(wildcard include/config/sa1100/weararm.h) \
$(wildcard include/config/sa1100/possio/px.h) \
$(wildcard include/config/sa1100/sidearm.h) \
$(wildcard include/config/sa1100/stork.h) \
$(wildcard include/config/sa1100/shannon.h) \
$(wildcard include/config/arch/ace.h) \
$(wildcard include/config/sa1100/ballyarm.h) \
$(wildcard include/config/sa1100/simputer.h) \
$(wildcard include/config/sa1100/nexterm.h) \
$(wildcard include/config/sa1100/sa1100/elf.h) \
$(wildcard include/config/sa1100/gator.h) \
$(wildcard include/config/arch/granite.h) \
$(wildcard include/config/sa1100/consus.h) \
$(wildcard include/config/arch/aaed2000.h) \
$(wildcard include/config/arch/cdb89712.h) \
$(wildcard include/config/sa1100/graphicsmaster.h) \
$(wildcard include/config/sa1100/adsbitsy.h) \
$(wildcard include/config/arch/pxa/idp.h) \
$(wildcard include/config/arch/plce.h) \
$(wildcard include/config/sa1100/pt/system3.h) \
$(wildcard include/config/arch/medalb.h) \
$(wildcard include/config/arch/eagle.h) \
$(wildcard include/config/arch/dsc21.h) \
$(wildcard include/config/arch/dsc24.h) \
$(wildcard include/config/arch/ti5472.h) \
$(wildcard include/config/arch/autcpu12.h) \
$(wildcard include/config/arch/uengine.h) \
$(wildcard include/config/sa1100/bluestem.h) \
$(wildcard include/config/arch/xingu8.h) \
$(wildcard include/config/arch/bushstb.h) \
$(wildcard include/config/sa1100/epsilon1.h) \
$(wildcard include/config/sa1100/balloon.h) \
$(wildcard include/config/arch/puppy.h) \
$(wildcard include/config/sa1100/elroy.h) \
$(wildcard include/config/arch/gms720.h) \
$(wildcard include/config/arch/s24x.h) \
$(wildcard include/config/arch/jtel/clep7312.h) \
$(wildcard include/config/arch/cx821xx.h) \
$(wildcard include/config/arch/edb7312.h) \
$(wildcard include/config/sa1100/bsa1110.h) \
$(wildcard include/config/arch/powerpin.h) \
$(wildcard include/config/arch/openarm.h) \
$(wildcard include/config/sa1100/whitechapel.h) \
$(wildcard include/config/sa1100/h3100.h) \
$(wildcard include/config/sa1100/h3800.h) \
$(wildcard include/config/arch/blue/v1.h) \
$(wildcard include/config/arch/pxa/cerf.h) \
$(wildcard include/config/arch/arm7tevb.h) \
$(wildcard include/config/sa1100/d7400.h) \
$(wildcard include/config/arch/piranha.h) \
$(wildcard include/config/sa1100/sbcamelot.h) \
$(wildcard include/config/sa1100/kings.h) \
$(wildcard include/config/arch/smdk2400.h) \
$(wildcard include/config/sa1100/collie.h) \
$(wildcard include/config/arch/idr.h) \
$(wildcard include/config/sa1100/badge4.h) \
$(wildcard include/config/arch/webnet.h) \
$(wildcard include/config/sa1100/d7300.h) \
$(wildcard include/config/sa1100/cep.h) \
$(wildcard include/config/arch/fortunet.h) \
$(wildcard include/config/arch/vc547x.h) \
$(wildcard include/config/sa1100/filewalker.h) \
$(wildcard include/config/sa1100/netgateway.h) \
$(wildcard include/config/sa1100/symbol2800.h) \
$(wildcard include/config/sa1100/suns.h) \
$(wildcard include/config/sa1100/frodo.h) \
$(wildcard include/config/sa1100/mach/tyte/ms301.h) \
$(wildcard include/config/arch/mx1ads.h) \
$(wildcard include/config/arch/h7201.h) \
$(wildcard include/config/arch/h7202.h) \
$(wildcard include/config/arch/amico.h) \
$(wildcard include/config/sa1100/iam.h) \
$(wildcard include/config/sa1100/tt530.h) \
$(wildcard include/config/arch/sam2400.h) \
$(wildcard include/config/sa1100/jornada56x.h) \
$(wildcard include/config/sa1100/active.h) \
$(wildcard include/config/arch/iq80321.h) \
$(wildcard include/config/sa1100/wid.h) \
$(wildcard include/config/arch/sabinal.h) \
$(wildcard include/config/arch/ixp425/matacumbe.h) \
$(wildcard include/config/sa1100/miniprint.h) \
$(wildcard include/config/arch/adm510x.h) \
$(wildcard include/config/sa1100/svs200.h) \
$(wildcard include/config/arch/atg/tcu.h) \
$(wildcard include/config/sa1100/jornada820.h) \
$(wildcard include/config/arch/s3c44b0.h) \
$(wildcard include/config/arch/margis2.h) \
$(wildcard include/config/arch/ks8695.h) \
$(wildcard include/config/arch/brh.h) \
$(wildcard include/config/arch/s3c2410.h) \
$(wildcard include/config/arch/possio/px30.h) \
$(wildcard include/config/arch/s3c2800.h) \
$(wildcard include/config/sa1100/fleetwood.h) \
$(wildcard include/config/arch/omaha.h) \
$(wildcard include/config/arch/ta7.h) \
$(wildcard include/config/sa1100/nova.h) \
$(wildcard include/config/arch/hmk.h) \
$(wildcard include/config/arch/karo.h) \
$(wildcard include/config/sa1100/fester.h) \
$(wildcard include/config/arch/gpi.h) \
$(wildcard include/config/arch/smdk2410.h) \
$(wildcard include/config/arch/i519.h) \
$(wildcard include/config/sa1100/nexio.h) \
$(wildcard include/config/sa1100/bitbox.h) \
$(wildcard include/config/sa1100/g200.h) \
$(wildcard include/config/sa1100/gill.h) \
$(wildcard include/config/arch/pxa/mercury.h) \
$(wildcard include/config/arch/ceiva.h) \
$(wildcard include/config/sa1100/fret.h) \
$(wildcard include/config/sa1100/emailphone.h) \
$(wildcard include/config/arch/h3900.h) \
$(wildcard include/config/arch/pxa1.h) \
$(wildcard include/config/sa1100/koan369.h) \
$(wildcard include/config/arch/cogent.h) \
$(wildcard include/config/arch/esl/simputer.h) \
$(wildcard include/config/arch/esl/simputer/clr.h) \
$(wildcard include/config/arch/esl/simputer/bw.h) \
$(wildcard include/config/arch/hhp/cradle.h) \
$(wildcard include/config/arch/he500.h) \
$(wildcard include/config/sa1100/inhandelf2.h) \
$(wildcard include/config/sa1100/inhandftip.h) \
$(wildcard include/config/sa1100/dnp1110.h) \
$(wildcard include/config/sa1100/pnp1110.h) \
$(wildcard include/config/arch/csb226.h) \
$(wildcard include/config/sa1100/arnold.h) \
$(wildcard include/config/mach/voiceblue.h) \
$(wildcard include/config/arch/jz8028.h) \
$(wildcard include/config/arch/h5400.h) \
$(wildcard include/config/sa1100/forte.h) \
$(wildcard include/config/sa1100/acam.h) \
$(wildcard include/config/sa1100/abox.h) \
$(wildcard include/config/arch/atmel.h) \
$(wildcard include/config/arch/sitsang.h) \
$(wildcard include/config/sa1100/cpu1110lcdnet.h) \
$(wildcard include/config/arch/mpl/vcma9.h) \
$(wildcard include/config/arch/opus/a1.h) \
$(wildcard include/config/arch/daytona.h) \
$(wildcard include/config/sa1100/killbear.h) \
$(wildcard include/config/arch/yoho.h) \
$(wildcard include/config/arch/jasper.h) \
$(wildcard include/config/arch/dsc25.h) \
$(wildcard include/config/mach/omap/innovator.h) \
$(wildcard include/config/arch/ramses.h) \
$(wildcard include/config/arch/s28x.h) \
$(wildcard include/config/arch/mport3.h) \
$(wildcard include/config/arch/pxa/eagle250.h) \
$(wildcard include/config/arch/pdb.h) \
$(wildcard include/config/sa1100/blue/2g.h) \
$(wildcard include/config/sa1100/bluearch.h) \
$(wildcard include/config/arch/ixdp2400.h) \
$(wildcard include/config/arch/ixdp2800.h) \
$(wildcard include/config/sa1100/explorer.h) \
$(wildcard include/config/arch/ixdp425.h) \
$(wildcard include/config/arch/chimp.h) \
$(wildcard include/config/arch/stork/nest.h) \
$(wildcard include/config/arch/stork/egg.h) \
$(wildcard include/config/sa1100/wismo.h) \
$(wildcard include/config/arch/ezlinx.h) \
$(wildcard include/config/arch/at91rm9200.h) \
$(wildcard include/config/arch/adtech/orion.h) \
$(wildcard include/config/arch/neptune.h) \
$(wildcard include/config/sa1100/hackkit.h) \
$(wildcard include/config/arch/pxa/wins30.h) \
$(wildcard include/config/sa1100/lavinna.h) \
$(wildcard include/config/arch/pxa/uengine.h) \
$(wildcard include/config/arch/innokom.h) \
$(wildcard include/config/arch/bms.h) \
$(wildcard include/config/arch/ixcdp1100.h) \
$(wildcard include/config/arch/prpmc1100.h) \
$(wildcard include/config/arch/at91rm9200dk.h) \
$(wildcard include/config/arch/armstick.h) \
$(wildcard include/config/arch/armonie.h) \
$(wildcard include/config/arch/mport1.h) \
$(wildcard include/config/arch/s3c5410.h) \
$(wildcard include/config/arch/zcp320a.h) \
$(wildcard include/config/arch/i/box.h) \
$(wildcard include/config/arch/stlc1502.h) \
$(wildcard include/config/arch/siren.h) \
$(wildcard include/config/arch/greenlake.h) \
$(wildcard include/config/arch/argus.h) \
$(wildcard include/config/sa1100/combadge.h) \
$(wildcard include/config/arch/rokepxa.h) \
$(wildcard include/config/arch/cintegrator.h) \
$(wildcard include/config/arch/guidea07.h) \
$(wildcard include/config/arch/tat257.h) \
$(wildcard include/config/arch/igp2425.h) \
$(wildcard include/config/arch/bluegramma.h) \
$(wildcard include/config/arch/ipod.h) \
$(wildcard include/config/arch/adsbitsyx.h) \
$(wildcard include/config/arch/trizeps2.h) \
$(wildcard include/config/arch/viper.h) \
$(wildcard include/config/sa1100/adsbitsyplus.h) \
$(wildcard include/config/sa1100/adsagc.h) \
$(wildcard include/config/arch/stp7312.h) \
$(wildcard include/config/mach/nx/phnx.h) \
$(wildcard include/config/arch/wep/ep250.h) \
$(wildcard include/config/arch/inhandelf3.h) \
$(wildcard include/config/arch/adi/coyote.h) \
$(wildcard include/config/arch/iyonix.h) \
$(wildcard include/config/arch/damicam/sa1110.h) \
$(wildcard include/config/arch/meg03.h) \
$(wildcard include/config/arch/pxa/whitechapel.h) \
$(wildcard include/config/arch/nwsc.h) \
$(wildcard include/config/arch/nwlarm.h) \
$(wildcard include/config/arch/ixp425/mguard.h) \
$(wildcard include/config/arch/pxa/netdcu4.h) \
$(wildcard include/config/arch/ixdp2401.h) \
$(wildcard include/config/arch/ixdp2801.h) \
$(wildcard include/config/arch/zodiac.h) \
$(wildcard include/config/arch/armmodul.h) \
$(wildcard include/config/sa1100/ketop.h) \
$(wildcard include/config/arch/av7200.h) \
$(wildcard include/config/arch/arch/ti925.h) \
$(wildcard include/config/arch/acq200.h) \
$(wildcard include/config/sa1100/pt/dafit.h) \
$(wildcard include/config/arch/ihba.h) \
$(wildcard include/config/arch/quinque.h) \
$(wildcard include/config/arch/nimbraone.h) \
$(wildcard include/config/arch/nimbra29x.h) \
$(wildcard include/config/arch/nimbra210.h) \
$(wildcard include/config/arch/hhp/d95xx.h) \
$(wildcard include/config/arch/labarm.h) \
$(wildcard include/config/arch/m825xx.h) \
$(wildcard include/config/sa1100/m7100.h) \
$(wildcard include/config/arch/nipc2.h) \
$(wildcard include/config/arch/fu7202.h) \
$(wildcard include/config/arch/adsagx.h) \
$(wildcard include/config/arch/pxa/pooh.h) \
$(wildcard include/config/arch/bandon.h) \
$(wildcard include/config/arch/pcm7210.h) \
$(wildcard include/config/arch/nms9200.h) \
$(wildcard include/config/arch/logodl.h) \
$(wildcard include/config/sa1100/m7140.h) \
$(wildcard include/config/arch/korebot.h) \
$(wildcard include/config/arch/iq31244.h) \
$(wildcard include/config/sa1100/koan393.h) \
$(wildcard include/config/arch/inhandftip3.h) \
$(wildcard include/config/arch/gonzo.h) \
$(wildcard include/config/arch/bast.h) \
$(wildcard include/config/arch/scanpass.h) \
$(wildcard include/config/arch/ep7312/pooh.h) \
$(wildcard include/config/arch/ta7s.h) \
$(wildcard include/config/arch/ta7v.h) \
$(wildcard include/config/sa1100/icarus.h) \
$(wildcard include/config/arch/h1900.h) \
$(wildcard include/config/sa1100/gemini.h) \
$(wildcard include/config/arch/axim.h) \
$(wildcard include/config/arch/audiotron.h) \
$(wildcard include/config/arch/h2200.h) \
$(wildcard include/config/arch/loox600.h) \
$(wildcard include/config/arch/niop.h) \
$(wildcard include/config/arch/dm310.h) \
$(wildcard include/config/arch/seedpxa/c2.h) \
$(wildcard include/config/arch/ixp4xx/mguard/pci.h) \
$(wildcard include/config/arch/h1940.h) \
$(wildcard include/config/arch/scorpio.h) \
$(wildcard include/config/arch/viva.h) \
$(wildcard include/config/arch/pxa/xcard.h) \
$(wildcard include/config/arch/csb335.h) \
$(wildcard include/config/arch/ixrd425.h) \
$(wildcard include/config/arch/iq80315.h) \
$(wildcard include/config/arch/nmp7312.h) \
$(wildcard include/config/arch/cx861xx.h) \
$(wildcard include/config/arch/enp2611.h) \
$(wildcard include/config/sa1100/xda.h) \
$(wildcard include/config/arch/csir/ims.h) \
$(wildcard include/config/arch/ixp421/dnaeeth.h) \
$(wildcard include/config/arch/pocketserv9200.h) \
$(wildcard include/config/arch/toto.h) \
$(wildcard include/config/arch/s3c2440.h) \
$(wildcard include/config/arch/ks8695p.h) \
$(wildcard include/config/arch/se4000.h) \
$(wildcard include/config/arch/quadriceps.h) \
$(wildcard include/config/arch/bronco.h) \
$(wildcard include/config/arch/esl/wireless/tab.h) \
$(wildcard include/config/arch/esl/sofcomp.h) \
$(wildcard include/config/arch/s5c7375.h) \
$(wildcard include/config/arch/spearhead.h) \
$(wildcard include/config/arch/pantera.h) \
$(wildcard include/config/arch/prayoglite.h) \
$(wildcard include/config/arch/gumstix.h) \
$(wildcard include/config/arch/rcube.h) \
$(wildcard include/config/arch/rea/olv.h) \
$(wildcard include/config/arch/pxa/iphone.h) \
$(wildcard include/config/arch/s3c3410.h) \
$(wildcard include/config/arch/espd/4510b.h) \
$(wildcard include/config/arch/mp1x.h) \
$(wildcard include/config/arch/at91rm9200tb.h) \
$(wildcard include/config/arch/adsvgx.h) \
$(wildcard include/config/mach/omap/h2.h) \
$(wildcard include/config/arch/pelee.h) \
$(wildcard include/config/mach/e740.h) \
$(wildcard include/config/arch/iq80331.h) \
$(wildcard include/config/arch/versatile/pb.h) \
$(wildcard include/config/mach/kev7a400.h) \
$(wildcard include/config/mach/lpd7a400.h) \
$(wildcard include/config/mach/lpd7a404.h) \
$(wildcard include/config/arch/fujitsu/camelot.h) \
$(wildcard include/config/arch/janus2m.h) \
$(wildcard include/config/mach/embtf.h) \
$(wildcard include/config/mach/hpm.h) \
$(wildcard include/config/mach/smdk2410tk.h) \
$(wildcard include/config/mach/smdk2410aj.h) \
$(wildcard include/config/mach/streetracer.h) \
$(wildcard include/config/mach/eframe.h) \
$(wildcard include/config/mach/csb337.h) \
$(wildcard include/config/mach/pxa/lark.h) \
$(wildcard include/config/mach/pnp2110.h) \
$(wildcard include/config/mach/tcc72x.h) \
$(wildcard include/config/mach/altair.h) \
$(wildcard include/config/mach/kc3.h) \
$(wildcard include/config/mach/sinteftd.h) \
$(wildcard include/config/mach/mainstone.h) \
$(wildcard include/config/mach/aday4x.h) \
$(wildcard include/config/mach/lite300.h) \
$(wildcard include/config/mach/s5c7376.h) \
$(wildcard include/config/mach/mt02.h) \
$(wildcard include/config/mach/mport3s.h) \
$(wildcard include/config/mach/ra/alpha.h) \
$(wildcard include/config/mach/xcep.h) \
$(wildcard include/config/mach/arcom/vulcan.h) \
$(wildcard include/config/mach/stargate.h) \
$(wildcard include/config/mach/armadilloj.h) \
$(wildcard include/config/mach/elroy/jack.h) \
$(wildcard include/config/mach/backend.h) \
$(wildcard include/config/mach/s5linbox.h) \
$(wildcard include/config/mach/nomadik.h) \
$(wildcard include/config/mach/ia/cpu/9200.h) \
$(wildcard include/config/mach/at91/bja1.h) \
$(wildcard include/config/mach/corgi.h) \
$(wildcard include/config/mach/poodle.h) \
$(wildcard include/config/mach/ten.h) \
$(wildcard include/config/mach/roverp5p.h) \
$(wildcard include/config/mach/sc2700.h) \
$(wildcard include/config/mach/ex/eagle.h) \
$(wildcard include/config/mach/nx/pxa12.h) \
$(wildcard include/config/mach/nx/pxa5.h) \
$(wildcard include/config/mach/blackboard2.h) \
$(wildcard include/config/mach/i819.h) \
$(wildcard include/config/mach/ixmb995e.h) \
$(wildcard include/config/mach/skyrider.h) \
$(wildcard include/config/mach/skyhawk.h) \
$(wildcard include/config/mach/enterprise.h) \
$(wildcard include/config/mach/dep2410.h) \
$(wildcard include/config/mach/armcore.h) \
$(wildcard include/config/mach/hobbit.h) \
$(wildcard include/config/mach/h7210.h) \
$(wildcard include/config/mach/pxa/netdcu5.h) \
$(wildcard include/config/mach/acc.h) \
$(wildcard include/config/mach/esl/sarva.h) \
$(wildcard include/config/mach/xm250.h) \
$(wildcard include/config/mach/t6tc1xb.h) \
$(wildcard include/config/mach/ess710.h) \
$(wildcard include/config/mach/mx31ads.h) \
$(wildcard include/config/mach/himalaya.h) \
$(wildcard include/config/mach/bolfenk.h) \
$(wildcard include/config/mach/at91rm9200kr.h) \
$(wildcard include/config/mach/edb9312.h) \
$(wildcard include/config/mach/omap/generic.h) \
$(wildcard include/config/mach/aximx3.h) \
$(wildcard include/config/mach/eb67xdip.h) \
$(wildcard include/config/mach/webtxs.h) \
$(wildcard include/config/mach/hawk.h) \
$(wildcard include/config/mach/ccat91sbc001.h) \
$(wildcard include/config/mach/expresso.h) \
$(wildcard include/config/mach/h4000.h) \
$(wildcard include/config/mach/dino.h) \
$(wildcard include/config/mach/ml675k.h) \
$(wildcard include/config/mach/edb9301.h) \
$(wildcard include/config/mach/edb9315.h) \
$(wildcard include/config/mach/reciva/tt.h) \
$(wildcard include/config/mach/cstcb01.h) \
$(wildcard include/config/mach/cstcb1.h) \
$(wildcard include/config/mach/shadwell.h) \
$(wildcard include/config/mach/goepel263.h) \
$(wildcard include/config/mach/acq100.h) \
$(wildcard include/config/mach/mx1fs2.h) \
$(wildcard include/config/mach/hiptop/g1.h) \
$(wildcard include/config/mach/sparky.h) \
$(wildcard include/config/mach/ns9750.h) \
$(wildcard include/config/mach/phoenix.h) \
$(wildcard include/config/mach/vr1000.h) \
$(wildcard include/config/mach/deisterpxa.h) \
$(wildcard include/config/mach/bcm1160.h) \
$(wildcard include/config/mach/pcm022.h) \
$(wildcard include/config/mach/adsgcx.h) \
$(wildcard include/config/mach/dreadnaught.h) \
$(wildcard include/config/mach/dm320.h) \
$(wildcard include/config/mach/markov.h) \
$(wildcard include/config/mach/cos7a400.h) \
$(wildcard include/config/mach/milano.h) \
$(wildcard include/config/mach/ue9328.h) \
$(wildcard include/config/mach/uex255.h) \
$(wildcard include/config/mach/ue2410.h) \
$(wildcard include/config/mach/a620.h) \
$(wildcard include/config/mach/ocelot.h) \
$(wildcard include/config/mach/cheetah.h) \
$(wildcard include/config/mach/omap/perseus2.h) \
$(wildcard include/config/mach/zvue.h) \
$(wildcard include/config/mach/roverp1.h) \
$(wildcard include/config/mach/asidial2.h) \
$(wildcard include/config/mach/s3c24a0.h) \
$(wildcard include/config/mach/e800.h) \
$(wildcard include/config/mach/e750.h) \
$(wildcard include/config/mach/s3c5500.h) \
$(wildcard include/config/mach/smdk5500.h) \
$(wildcard include/config/mach/signalsync.h) \
$(wildcard include/config/mach/nbc.h) \
$(wildcard include/config/mach/kodiak.h) \
$(wildcard include/config/mach/netbookpro.h) \
$(wildcard include/config/mach/hw90200.h) \
$(wildcard include/config/mach/condor.h) \
$(wildcard include/config/mach/cup.h) \
$(wildcard include/config/mach/kite.h) \
$(wildcard include/config/mach/scb9328.h) \
$(wildcard include/config/mach/omap/h3.h) \
$(wildcard include/config/mach/omap/h4.h) \
$(wildcard include/config/mach/n10.h) \
$(wildcard include/config/mach/montajade.h) \
$(wildcard include/config/mach/sg560.h) \
$(wildcard include/config/mach/dp1000.h) \
$(wildcard include/config/mach/omap/osk.h) \
$(wildcard include/config/mach/rg100v3.h) \
$(wildcard include/config/mach/mx2ads.h) \
$(wildcard include/config/mach/pxa/kilo.h) \
$(wildcard include/config/mach/ixp4xx/eagle.h) \
$(wildcard include/config/mach/tosa.h) \
$(wildcard include/config/mach/mb2520f.h) \
$(wildcard include/config/mach/emc1000.h) \
$(wildcard include/config/mach/tidsc25.h) \
$(wildcard include/config/mach/akcpmxl.h) \
$(wildcard include/config/mach/av3xx.h) \
$(wildcard include/config/mach/avila.h) \
$(wildcard include/config/mach/pxa/mpm10.h) \
$(wildcard include/config/mach/pxa/kyanite.h) \
$(wildcard include/config/mach/sgold.h) \
$(wildcard include/config/mach/oscar.h) \
$(wildcard include/config/mach/epxa4usb2.h) \
$(wildcard include/config/mach/xsengine.h) \
$(wildcard include/config/mach/ip600.h) \
$(wildcard include/config/mach/mcan2.h) \
$(wildcard include/config/mach/ddi/blueridge.h) \
$(wildcard include/config/mach/skyminder.h) \
$(wildcard include/config/mach/lpd79520.h) \
$(wildcard include/config/mach/edb9302.h) \
$(wildcard include/config/mach/hw90340.h) \
$(wildcard include/config/mach/cip/box.h) \
$(wildcard include/config/mach/ivpn.h) \
$(wildcard include/config/mach/rsoc2.h) \
$(wildcard include/config/mach/husky.h) \
$(wildcard include/config/mach/boxer.h) \
$(wildcard include/config/mach/shepherd.h) \
$(wildcard include/config/mach/aml42800aa.h) \
$(wildcard include/config/mach/lpc2294.h) \
$(wildcard include/config/mach/switchgrass.h) \
$(wildcard include/config/mach/ens/cmu.h) \
$(wildcard include/config/mach/mm6/sdb.h) \
$(wildcard include/config/mach/saturn.h) \
$(wildcard include/config/mach/i30030evb.h) \
$(wildcard include/config/mach/mxc27530evb.h) \
$(wildcard include/config/mach/smdk2800.h) \
$(wildcard include/config/mach/mtwilson.h) \
$(wildcard include/config/mach/ziti.h) \
$(wildcard include/config/mach/grandfather.h) \
$(wildcard include/config/mach/tengine.h) \
$(wildcard include/config/mach/s3c2460.h) \
$(wildcard include/config/mach/pdm.h) \
$(wildcard include/config/mach/h4700.h) \
$(wildcard include/config/mach/h6300.h) \
$(wildcard include/config/mach/rz1700.h) \
$(wildcard include/config/mach/a716.h) \
$(wildcard include/config/mach/estk2440a.h) \
$(wildcard include/config/mach/atwixp425.h) \
$(wildcard include/config/mach/csb336.h) \
$(wildcard include/config/mach/rirm2.h) \
$(wildcard include/config/mach/cx23518.h) \
$(wildcard include/config/mach/cx2351x.h) \
$(wildcard include/config/mach/computime.h) \
$(wildcard include/config/mach/izarus.h) \
$(wildcard include/config/mach/rts.h) \
$(wildcard include/config/mach/se5100.h) \
$(wildcard include/config/mach/s3c2510.h) \
$(wildcard include/config/mach/csb437tl.h) \
$(wildcard include/config/mach/slauson.h) \
$(wildcard include/config/mach/pearlriver.h) \
$(wildcard include/config/mach/tdc/p210.h) \
$(wildcard include/config/mach/sg580.h) \
$(wildcard include/config/mach/wrsbcarm7.h) \
$(wildcard include/config/mach/ipd.h) \
$(wildcard include/config/mach/pxa/dnp2110.h) \
$(wildcard include/config/mach/xaeniax.h) \
$(wildcard include/config/mach/somn4250.h) \
$(wildcard include/config/mach/pleb2.h) \
$(wildcard include/config/mach/cornwallis.h) \
$(wildcard include/config/mach/gurney/drv.h) \
$(wildcard include/config/mach/chaffee.h) \
$(wildcard include/config/mach/rms101.h) \
$(wildcard include/config/mach/rx3715.h) \
$(wildcard include/config/mach/swift.h) \
$(wildcard include/config/mach/roverp7.h) \
$(wildcard include/config/mach/pr818s.h) \
$(wildcard include/config/mach/trxpro.h) \
$(wildcard include/config/mach/nslu2.h) \
$(wildcard include/config/mach/e400.h) \
$(wildcard include/config/mach/trab.h) \
$(wildcard include/config/mach/cmc/pu2.h) \
$(wildcard include/config/mach/fulcrum.h) \
$(wildcard include/config/mach/netgate42x.h) \
$(wildcard include/config/mach/str710.h) \
$(wildcard include/config/mach/ixdpg425.h) \
$(wildcard include/config/mach/tomtomgo.h) \
$(wildcard include/config/mach/versatile/ab.h) \
$(wildcard include/config/mach/edb9307.h) \
$(wildcard include/config/mach/sg565.h) \
$(wildcard include/config/mach/lpd79524.h) \
$(wildcard include/config/mach/lpd79525.h) \
$(wildcard include/config/mach/rms100.h) \
$(wildcard include/config/mach/kb9200.h) \
$(wildcard include/config/mach/sx1.h) \
$(wildcard include/config/mach/hms39c7092.h) \
$(wildcard include/config/mach/armadillo.h) \
$(wildcard include/config/mach/ipcu.h) \
$(wildcard include/config/mach/loox720.h) \
$(wildcard include/config/mach/ixdp465.h) \
$(wildcard include/config/mach/ixdp2351.h) \
$(wildcard include/config/mach/adsvix.h) \
$(wildcard include/config/mach/dm270.h) \
$(wildcard include/config/mach/socltplus.h) \
$(wildcard include/config/mach/ecia.h) \
$(wildcard include/config/mach/cm4008.h) \
$(wildcard include/config/mach/p2001.h) \
$(wildcard include/config/mach/twister.h) \
$(wildcard include/config/mach/mudshark.h) \
$(wildcard include/config/mach/hb2.h) \
$(wildcard include/config/mach/iq80332.h) \
$(wildcard include/config/mach/sendt.h) \
$(wildcard include/config/mach/mx2jazz.h) \
$(wildcard include/config/mach/multiio.h) \
$(wildcard include/config/mach/hrdisplay.h) \
$(wildcard include/config/mach/mxc27530ads.h) \
$(wildcard include/config/mach/trizeps3.h) \
$(wildcard include/config/mach/zefeerdza.h) \
$(wildcard include/config/mach/zefeerdzb.h) \
$(wildcard include/config/mach/zefeerdzg.h) \
$(wildcard include/config/mach/zefeerdzn.h) \
$(wildcard include/config/mach/zefeerdzq.h) \
$(wildcard include/config/mach/gtwx5715.h) \
$(wildcard include/config/mach/astro/jack.h) \
$(wildcard include/config/mach/tip03.h) \
$(wildcard include/config/mach/a9200ec.h) \
$(wildcard include/config/mach/pnx0105.h) \
$(wildcard include/config/mach/adcpoecpu.h) \
$(wildcard include/config/mach/csb637.h) \
$(wildcard include/config/mach/mb9200.h) \
$(wildcard include/config/mach/kulun.h) \
$(wildcard include/config/mach/snapper.h) \
$(wildcard include/config/mach/optima.h) \
$(wildcard include/config/mach/dlhsbc.h) \
$(wildcard include/config/mach/x30.h) \
$(wildcard include/config/mach/n30.h) \
$(wildcard include/config/mach/manga/ks8695.h) \
$(wildcard include/config/mach/ajax.h) \
$(wildcard include/config/mach/nec/mp900.h) \
$(wildcard include/config/mach/vvtk1000.h) \
$(wildcard include/config/mach/kafa.h) \
$(wildcard include/config/mach/vvtk3000.h) \
$(wildcard include/config/mach/pimx1.h) \
$(wildcard include/config/mach/ollie.h) \
$(wildcard include/config/mach/skymax.h) \
$(wildcard include/config/mach/jazz.h) \
$(wildcard include/config/mach/tel/t3.h) \
$(wildcard include/config/mach/aisino/fcr255.h) \
$(wildcard include/config/mach/btweb.h) \
$(wildcard include/config/mach/dbg/lh79520.h) \
$(wildcard include/config/mach/cm41xx.h) \
$(wildcard include/config/mach/ts72xx.h) \
$(wildcard include/config/mach/nggpxa.h) \
$(wildcard include/config/mach/csb535.h) \
$(wildcard include/config/mach/csb536.h) \
$(wildcard include/config/mach/pxa/trakpod.h) \
$(wildcard include/config/mach/praxis.h) \
$(wildcard include/config/mach/lh75411.h) \
$(wildcard include/config/mach/otom.h) \
$(wildcard include/config/mach/nexcoder/2440.h) \
$(wildcard include/config/mach/loox410.h) \
$(wildcard include/config/mach/westlake.h) \
$(wildcard include/config/mach/nsb.h) \
$(wildcard include/config/mach/esl/sarva/stn.h) \
$(wildcard include/config/mach/esl/sarva/tft.h) \
$(wildcard include/config/mach/esl/sarva/iad.h) \
$(wildcard include/config/mach/esl/sarva/acc.h) \
$(wildcard include/config/mach/typhoon.h) \
$(wildcard include/config/mach/cnav.h) \
$(wildcard include/config/mach/a730.h) \
$(wildcard include/config/mach/netstar.h) \
$(wildcard include/config/mach/phasefale/supercon.h) \
$(wildcard include/config/mach/shiva1100.h) \
$(wildcard include/config/mach/etexsc.h) \
$(wildcard include/config/mach/ixdpg465.h) \
$(wildcard include/config/mach/a9m2410.h) \
$(wildcard include/config/mach/a9m2440.h) \
$(wildcard include/config/mach/a9m9750.h) \
$(wildcard include/config/mach/a9m9360.h) \
$(wildcard include/config/mach/unc90.h) \
$(wildcard include/config/mach/eco920.h) \
$(wildcard include/config/mach/satview.h) \
$(wildcard include/config/mach/roadrunner.h) \
$(wildcard include/config/mach/at91rm9200ek.h) \
$(wildcard include/config/mach/gp32.h) \
$(wildcard include/config/mach/gem.h) \
$(wildcard include/config/mach/i858.h) \
$(wildcard include/config/mach/hx2750.h) \
$(wildcard include/config/mach/mxc91131evb.h) \
$(wildcard include/config/mach/p700.h) \
$(wildcard include/config/mach/cpe.h) \
$(wildcard include/config/mach/spitz.h) \
$(wildcard include/config/mach/nimbra340.h) \
$(wildcard include/config/mach/lpc22xx.h) \
$(wildcard include/config/mach/comet3.h) \
$(wildcard include/config/mach/comet4.h) \
$(wildcard include/config/mach/csb625.h) \
$(wildcard include/config/mach/fortunet2.h) \
$(wildcard include/config/mach/s5h2200.h) \
$(wildcard include/config/mach/optorm920.h) \
$(wildcard include/config/mach/adsbitsyxb.h) \
$(wildcard include/config/mach/adssphere.h) \
$(wildcard include/config/mach/adsportal.h) \
$(wildcard include/config/mach/ln2410sbc.h) \
$(wildcard include/config/mach/cb3rufc.h) \
$(wildcard include/config/mach/mp2usb.h) \
$(wildcard include/config/mach/ntnp425c.h) \
$(wildcard include/config/mach/colibri.h) \
$(wildcard include/config/mach/pcm7220.h) \
$(wildcard include/config/mach/gateway7001.h) \
$(wildcard include/config/mach/pcm027.h) \
$(wildcard include/config/mach/cmpxa.h) \
$(wildcard include/config/mach/anubis.h) \
$(wildcard include/config/mach/ite8152.h) \
$(wildcard include/config/mach/lpc3xxx.h) \
$(wildcard include/config/mach/puppeteer.h) \
$(wildcard include/config/mach/e570.h) \
$(wildcard include/config/mach/x50.h) \
$(wildcard include/config/mach/recon.h) \
$(wildcard include/config/mach/xboardgp8.h) \
$(wildcard include/config/mach/fpic2.h) \
$(wildcard include/config/mach/akita.h) \
$(wildcard include/config/mach/a81.h) \
$(wildcard include/config/mach/svm/sc25x.h) \
$(wildcard include/config/mach/vadatech020.h) \
$(wildcard include/config/mach/tli.h) \
$(wildcard include/config/mach/edb9315lc.h) \
$(wildcard include/config/mach/passec.h) \
$(wildcard include/config/mach/ds/tiger.h) \
$(wildcard include/config/mach/e310.h) \
$(wildcard include/config/mach/e330.h) \
$(wildcard include/config/mach/rt3000.h) \
$(wildcard include/config/mach/nokia770.h) \
$(wildcard include/config/mach/pnx0106.h) \
$(wildcard include/config/mach/hx21xx.h) \
$(wildcard include/config/mach/faraday.h) \
$(wildcard include/config/mach/sbc9312.h) \
$(wildcard include/config/mach/batman.h) \
$(wildcard include/config/mach/jpd201.h) \
$(wildcard include/config/mach/mipsa.h) \
$(wildcard include/config/mach/kacom.h) \
$(wildcard include/config/mach/swarcocpu.h) \
$(wildcard include/config/mach/swarcodsl.h) \
$(wildcard include/config/mach/blueangel.h) \
$(wildcard include/config/mach/hairygrama.h) \
$(wildcard include/config/mach/banff.h) \
$(wildcard include/config/mach/carmeva.h) \
$(wildcard include/config/mach/sam255.h) \
$(wildcard include/config/mach/ppm10.h) \
$(wildcard include/config/mach/edb9315a.h) \
$(wildcard include/config/mach/sunset.h) \
$(wildcard include/config/mach/stargate2.h) \
$(wildcard include/config/mach/intelmote2.h) \
$(wildcard include/config/mach/trizeps4.h) \
$(wildcard include/config/mach/mainstone2.h) \
$(wildcard include/config/mach/ez/ixp42x.h) \
$(wildcard include/config/mach/tapwave/zodiac.h) \
$(wildcard include/config/mach/universalmeter.h) \
$(wildcard include/config/mach/hicoarm9.h) \
$(wildcard include/config/mach/pnx4008.h) \
$(wildcard include/config/mach/kws6000.h) \
$(wildcard include/config/mach/portux920t.h) \
$(wildcard include/config/mach/ez/x5.h) \
$(wildcard include/config/mach/omap/rudolph.h) \
$(wildcard include/config/mach/cpuat91.h) \
$(wildcard include/config/mach/rea9200.h) \
$(wildcard include/config/mach/acts/pune/sa1110.h) \
$(wildcard include/config/mach/ixp425.h) \
$(wildcard include/config/mach/i30030ads.h) \
$(wildcard include/config/mach/perch.h) \
$(wildcard include/config/mach/eis05r1.h) \
$(wildcard include/config/mach/pepperpad.h) \
$(wildcard include/config/mach/sb3010.h) \
$(wildcard include/config/mach/rm9200.h) \
$(wildcard include/config/mach/dma03.h) \
$(wildcard include/config/mach/road/s101.h) \
$(wildcard include/config/mach/iq81340sc.h) \
$(wildcard include/config/mach/iq/nextgen/b.h) \
$(wildcard include/config/mach/iq81340mc.h) \
$(wildcard include/config/mach/iq/nextgen/d.h) \
$(wildcard include/config/mach/iq/nextgen/e.h) \
$(wildcard include/config/mach/mallow/at91.h) \
$(wildcard include/config/mach/cybertracker/i.h) \
$(wildcard include/config/mach/gesbc931x.h) \
$(wildcard include/config/mach/centipad.h) \
$(wildcard include/config/mach/armsoc.h) \
$(wildcard include/config/mach/se4200.h) \
$(wildcard include/config/mach/ems197a.h) \
$(wildcard include/config/mach/micro9.h) \
$(wildcard include/config/mach/micro9l.h) \
$(wildcard include/config/mach/uc5471dsp.h) \
$(wildcard include/config/mach/sj5471eng.h) \
$(wildcard include/config/mach/cmpxa26x.h) \
$(wildcard include/config/mach/nc.h) \
$(wildcard include/config/mach/omap/palmte.h) \
$(wildcard include/config/mach/ajax52x.h) \
$(wildcard include/config/mach/siriustar.h) \
$(wildcard include/config/mach/iodata/hdlg.h) \
$(wildcard include/config/mach/at91rm9200utl.h) \
$(wildcard include/config/mach/biosafe.h) \
$(wildcard include/config/mach/mp1000.h) \
$(wildcard include/config/mach/parsy.h) \
$(wildcard include/config/mach/ccxp.h) \
$(wildcard include/config/mach/omap/gsample.h) \
$(wildcard include/config/mach/realview/eb.h) \
$(wildcard include/config/mach/samoa.h) \
$(wildcard include/config/mach/palmt3.h) \
$(wildcard include/config/mach/i878.h) \
$(wildcard include/config/mach/borzoi.h) \
$(wildcard include/config/mach/gecko.h) \
$(wildcard include/config/mach/ds101.h) \
$(wildcard include/config/mach/omap/palmtt2.h) \
$(wildcard include/config/mach/palmld.h) \
$(wildcard include/config/mach/cc9c.h) \
$(wildcard include/config/mach/sbc1670.h) \
$(wildcard include/config/mach/ixdp28x5.h) \
$(wildcard include/config/mach/omap/palmtt.h) \
$(wildcard include/config/mach/ml696k.h) \
$(wildcard include/config/mach/arcom/zeus.h) \
$(wildcard include/config/mach/osiris.h) \
$(wildcard include/config/mach/maestro.h) \
$(wildcard include/config/mach/palmte2.h) \
$(wildcard include/config/mach/ixbbm.h) \
$(wildcard include/config/mach/mx27ads.h) \
$(wildcard include/config/mach/ax8004.h) \
$(wildcard include/config/mach/at91sam9261ek.h) \
$(wildcard include/config/mach/loft.h) \
$(wildcard include/config/mach/magpie.h) \
$(wildcard include/config/mach/mx21ads.h) \
$(wildcard include/config/mach/mb87m3400.h) \
$(wildcard include/config/mach/mguard/delta.h) \
$(wildcard include/config/mach/davinci/dvdp.h) \
$(wildcard include/config/mach/htcuniversal.h) \
$(wildcard include/config/mach/tpad.h) \
$(wildcard include/config/mach/roverp3.h) \
$(wildcard include/config/mach/jornada928.h) \
$(wildcard include/config/mach/mv88fxx81.h) \
$(wildcard include/config/mach/stmp36xx.h) \
$(wildcard include/config/mach/sxni79524.h) \
$(wildcard include/config/mach/ams/delta.h) \
$(wildcard include/config/mach/uranium.h) \
$(wildcard include/config/mach/ucon.h) \
$(wildcard include/config/mach/nas100d.h) \
$(wildcard include/config/mach/l083/1000.h) \
$(wildcard include/config/mach/ezx.h) \
$(wildcard include/config/mach/pnx5220.h) \
$(wildcard include/config/mach/butte.h) \
$(wildcard include/config/mach/srm2.h) \
$(wildcard include/config/mach/dsbr.h) \
$(wildcard include/config/mach/crystalball.h) \
$(wildcard include/config/mach/tinypxa27x.h) \
$(wildcard include/config/mach/herbie.h) \
$(wildcard include/config/mach/magician.h) \
$(wildcard include/config/mach/cm4002.h) \
$(wildcard include/config/mach/b4.h) \
$(wildcard include/config/mach/maui.h) \
$(wildcard include/config/mach/cybertracker/g.h) \
$(wildcard include/config/mach/nxdkn.h) \
$(wildcard include/config/mach/mio8390.h) \
$(wildcard include/config/mach/omi/board.h) \
$(wildcard include/config/mach/mx21civ.h) \
$(wildcard include/config/mach/mahi/cdac.h) \
$(wildcard include/config/mach/palmtx.h) \
$(wildcard include/config/mach/s3c2413.h) \
$(wildcard include/config/mach/samsys/ep0.h) \
$(wildcard include/config/mach/wg302v1.h) \
$(wildcard include/config/mach/wg302v2.h) \
$(wildcard include/config/mach/eb42x.h) \
$(wildcard include/config/mach/iq331es.h) \
$(wildcard include/config/mach/cosydsp.h) \
$(wildcard include/config/mach/uplat7d.h) \
$(wildcard include/config/mach/ptdavinci.h) \
$(wildcard include/config/mach/mbus.h) \
$(wildcard include/config/mach/nadia2vb.h) \
$(wildcard include/config/mach/r1000.h) \
$(wildcard include/config/mach/hw90250.h) \
$(wildcard include/config/mach/omap/2430sdp.h) \
$(wildcard include/config/mach/davinci/evm.h) \
$(wildcard include/config/mach/omap/tornado.h) \
$(wildcard include/config/mach/olocreek.h) \
$(wildcard include/config/mach/palmz72.h) \
$(wildcard include/config/mach/nxdb500.h) \
$(wildcard include/config/mach/apf9328.h) \
$(wildcard include/config/mach/omap/wipoq.h) \
$(wildcard include/config/mach/omap/twip.h) \
$(wildcard include/config/mach/treo650.h) \
$(wildcard include/config/mach/acumen.h) \
$(wildcard include/config/mach/xp100.h) \
$(wildcard include/config/mach/fs2410.h) \
$(wildcard include/config/mach/pxa270/cerf.h) \
$(wildcard include/config/mach/sq2ftlpalm.h) \
$(wildcard include/config/mach/bsemserver.h) \
$(wildcard include/config/mach/netclient.h) \
$(wildcard include/config/mach/palmt5.h) \
$(wildcard include/config/mach/palmtc.h) \
$(wildcard include/config/mach/omap/apollon.h) \
$(wildcard include/config/mach/mxc30030evb.h) \
$(wildcard include/config/mach/rea/2d.h) \
$(wildcard include/config/mach/ti3e524.h) \
$(wildcard include/config/mach/ateb9200.h) \
$(wildcard include/config/mach/auckland.h) \
$(wildcard include/config/mach/ak3320m.h) \
$(wildcard include/config/mach/duramax.h) \
$(wildcard include/config/mach/n35.h) \
$(wildcard include/config/mach/pronghorn.h) \
$(wildcard include/config/mach/fundy.h) \
$(wildcard include/config/mach/logicpd/pxa270.h) \
$(wildcard include/config/mach/cpu777.h) \
$(wildcard include/config/mach/simicon9201.h) \
$(wildcard include/config/mach/leap2/hpm.h) \
$(wildcard include/config/mach/cm922txa10.h) \
$(wildcard include/config/mach/pxa.h) \
$(wildcard include/config/mach/sandgate2.h) \
$(wildcard include/config/mach/sandgate2g.h) \
$(wildcard include/config/mach/sandgate2p.h) \
$(wildcard include/config/mach/fred/jack.h) \
$(wildcard include/config/mach/ttg/color1.h) \
$(wildcard include/config/mach/nxeb500hmi.h) \
$(wildcard include/config/mach/netdcu8.h) \
$(wildcard include/config/mach/ng/fvx538.h) \
$(wildcard include/config/mach/ng/fvs338.h) \
$(wildcard include/config/mach/pnx4103.h) \
$(wildcard include/config/mach/hesdb.h) \
$(wildcard include/config/mach/xsilo.h) \
$(wildcard include/config/mach/espresso.h) \
$(wildcard include/config/mach/emlc.h) \
$(wildcard include/config/mach/sisteron.h) \
$(wildcard include/config/mach/rx1950.h) \
$(wildcard include/config/mach/tsc/venus.h) \
$(wildcard include/config/mach/ds101j.h) \
$(wildcard include/config/mach/mxc30030ads.h) \
$(wildcard include/config/mach/fujitsu/wimaxsoc.h) \
$(wildcard include/config/mach/dualpcmodem.h) \
$(wildcard include/config/mach/gesbc9312.h) \
$(wildcard include/config/mach/htcapache.h) \
$(wildcard include/config/mach/ixdp435.h) \
$(wildcard include/config/mach/catprovt100.h) \
$(wildcard include/config/mach/picotux1xx.h) \
$(wildcard include/config/mach/picotux2xx.h) \
$(wildcard include/config/mach/dsmg600.h) \
$(wildcard include/config/mach/empc2.h) \
$(wildcard include/config/mach/ventura.h) \
$(wildcard include/config/mach/phidget/sbc.h) \
$(wildcard include/config/mach/ij3k.h) \
$(wildcard include/config/mach/pisgah.h) \
$(wildcard include/config/mach/omap/fsample.h) \
$(wildcard include/config/mach/sg720.h) \
$(wildcard include/config/mach/redfox.h) \
$(wildcard include/config/mach/mysh/ep9315/1.h) \
$(wildcard include/config/mach/tpf106.h) \
$(wildcard include/config/mach/at91rm9200kg.h) \
$(wildcard include/config/mach/sledb.h) \
$(wildcard include/config/mach/ontrack.h) \
$(wildcard include/config/mach/pm1200.h) \
$(wildcard include/config/mach/ess24xxx.h) \
$(wildcard include/config/mach/coremp7.h) \
$(wildcard include/config/mach/nexcoder/6446.h) \
$(wildcard include/config/mach/stvc8380.h) \
$(wildcard include/config/mach/teklynx.h) \
$(wildcard include/config/mach/carbonado.h) \
$(wildcard include/config/mach/sysmos/mp730.h) \
$(wildcard include/config/mach/snapper/cl15.h) \
$(wildcard include/config/mach/pgigim.h) \
$(wildcard include/config/mach/ptx9160p2.h) \
$(wildcard include/config/mach/dcore1.h) \
$(wildcard include/config/mach/victorpxa.h) \
$(wildcard include/config/mach/mx2dtb.h) \
$(wildcard include/config/mach/pxa/irex/er0100.h) \
$(wildcard include/config/mach/omap/palmz71.h) \
$(wildcard include/config/mach/bartec/deg.h) \
$(wildcard include/config/mach/hw50251.h) \
$(wildcard include/config/mach/ibox.h) \
$(wildcard include/config/mach/atlaslh7a404.h) \
$(wildcard include/config/mach/pt2026.h) \
$(wildcard include/config/mach/htcalpine.h) \
$(wildcard include/config/mach/bartec/vtu.h) \
$(wildcard include/config/mach/vcoreii.h) \
$(wildcard include/config/mach/pdnb3.h) \
$(wildcard include/config/mach/htcbeetles.h) \
$(wildcard include/config/mach/s3c6400.h) \
$(wildcard include/config/mach/s3c2443.h) \
$(wildcard include/config/mach/omap/ldk.h) \
$(wildcard include/config/mach/smdk2460.h) \
$(wildcard include/config/mach/smdk2440.h) \
$(wildcard include/config/mach/smdk2412.h) \
$(wildcard include/config/mach/webbox.h) \
$(wildcard include/config/mach/cwwndp.h) \
$(wildcard include/config/mach/dragon.h) \
$(wildcard include/config/mach/opendo/cpu/board.h) \
$(wildcard include/config/mach/ccm2200.h) \
$(wildcard include/config/mach/etwarm.h) \
$(wildcard include/config/mach/m93030.h) \
$(wildcard include/config/mach/cc7u.h) \
$(wildcard include/config/mach/mtt/ranger.h) \
$(wildcard include/config/mach/nexus.h) \
$(wildcard include/config/mach/desman.h) \
$(wildcard include/config/mach/bkde303.h) \
$(wildcard include/config/mach/smdk2413.h) \
$(wildcard include/config/mach/aml/m7200.h) \
$(wildcard include/config/mach/aml/m5900.h) \
$(wildcard include/config/mach/sg640.h) \
$(wildcard include/config/mach/edg79524.h) \
$(wildcard include/config/mach/ai2410.h) \
$(wildcard include/config/mach/ixp465.h) \
$(wildcard include/config/mach/balloon3.h) \
$(wildcard include/config/mach/heins.h) \
$(wildcard include/config/mach/mpluseva.h) \
$(wildcard include/config/mach/rt042.h) \
$(wildcard include/config/mach/cwiem.h) \
$(wildcard include/config/mach/cm/x270.h) \
$(wildcard include/config/mach/cm/x255.h) \
$(wildcard include/config/mach/esh/at91.h) \
$(wildcard include/config/mach/sandgate3.h) \
$(wildcard include/config/mach/primo.h) \
$(wildcard include/config/mach/gemstone.h) \
$(wildcard include/config/mach/pronghornmetro.h) \
$(wildcard include/config/mach/sidewinder.h) \
$(wildcard include/config/mach/picomod1.h) \
$(wildcard include/config/mach/sg590.h) \
$(wildcard include/config/mach/akai9307.h) \
$(wildcard include/config/mach/fontaine.h) \
$(wildcard include/config/mach/wombat.h) \
$(wildcard include/config/mach/acq300.h) \
$(wildcard include/config/mach/mod/270.h) \
$(wildcard include/config/mach/vc0820.h) \
$(wildcard include/config/mach/ani/aim.h) \
$(wildcard include/config/mach/jellyfish.h) \
$(wildcard include/config/mach/amanita.h) \
$(wildcard include/config/mach/vlink.h) \
$(wildcard include/config/mach/dexflex.h) \
$(wildcard include/config/mach/eigen/ttq.h) \
$(wildcard include/config/mach/arcom/titan.h) \
$(wildcard include/config/mach/tabla.h) \
$(wildcard include/config/mach/mdirac3.h) \
$(wildcard include/config/mach/mrhfbp2.h) \
$(wildcard include/config/mach/at91rm9200rb.h) \
$(wildcard include/config/mach/ani/apm.h) \
$(wildcard include/config/mach/ella1.h) \
$(wildcard include/config/mach/inhand/pxa27x.h) \
$(wildcard include/config/mach/inhand/pxa25x.h) \
$(wildcard include/config/mach/empos/xm.h) \
$(wildcard include/config/mach/empos.h) \
$(wildcard include/config/mach/empos/tiny.h) \
$(wildcard include/config/mach/empos/sm.h) \
$(wildcard include/config/mach/egret.h) \
$(wildcard include/config/mach/ostrich.h) \
$(wildcard include/config/mach/n50.h) \
$(wildcard include/config/mach/ecbat91.h) \
$(wildcard include/config/mach/stareast.h) \
$(wildcard include/config/mach/dspg/dw.h) \
$(wildcard include/config/mach/onearm.h) \
$(wildcard include/config/mach/mrg110/6.h) \
$(wildcard include/config/mach/wrt300nv2.h) \
$(wildcard include/config/mach/xm/bulverde.h) \
$(wildcard include/config/mach/msm6100.h) \
$(wildcard include/config/mach/eti/b1.h) \
$(wildcard include/config/mach/zilog/za9l.h) \
$(wildcard include/config/mach/bit2440.h) \
$(wildcard include/config/mach/nbi.h) \
$(wildcard include/config/mach/smdk2443.h) \
$(wildcard include/config/mach/vdavinci.h) \
$(wildcard include/config/mach/atc6.h) \
$(wildcard include/config/mach/multmdw.h) \
$(wildcard include/config/mach/mba2440.h) \
$(wildcard include/config/mach/ecsd.h) \
$(wildcard include/config/mach/palmz31.h) \
$(wildcard include/config/mach/fsg.h) \
$(wildcard include/config/mach/razor101.h) \
$(wildcard include/config/mach/opera/tdm.h) \
$(wildcard include/config/mach/comcerto.h) \
$(wildcard include/config/mach/tb0319.h) \
$(wildcard include/config/mach/kws8000.h) \
$(wildcard include/config/mach/b2.h) \
$(wildcard include/config/mach/lcl54.h) \
$(wildcard include/config/mach/at91sam9260ek.h) \
$(wildcard include/config/mach/glantank.h) \
$(wildcard include/config/mach/n2100.h) \
$(wildcard include/config/mach/n4100.h) \
$(wildcard include/config/mach/vertical/rsc4.h) \
$(wildcard include/config/mach/sg8100.h) \
$(wildcard include/config/mach/im42xx.h) \
$(wildcard include/config/mach/ftxx.h) \
$(wildcard include/config/mach/lwfusion.h) \
$(wildcard include/config/mach/qt2410.h) \
$(wildcard include/config/mach/kixrp435.h) \
$(wildcard include/config/mach/ccw9c.h) \
$(wildcard include/config/mach/dabhs.h) \
$(wildcard include/config/mach/gzmx.h) \
$(wildcard include/config/mach/ipnw100ap.h) \
$(wildcard include/config/mach/cc9p9360dev.h) \
$(wildcard include/config/mach/cc9p9750dev.h) \
$(wildcard include/config/mach/cc9p9360val.h) \
$(wildcard include/config/mach/cc9p9750val.h) \
$(wildcard include/config/mach/nx70v.h) \
$(wildcard include/config/mach/at91rm9200df.h) \
$(wildcard include/config/mach/se/pilot2.h) \
$(wildcard include/config/mach/mtcn/t800.h) \
$(wildcard include/config/mach/vcmx212.h) \
$(wildcard include/config/mach/lynx.h) \
$(wildcard include/config/mach/at91sam9260id.h) \
$(wildcard include/config/mach/hw86052.h) \
$(wildcard include/config/mach/pilz/pmi3.h) \
$(wildcard include/config/mach/edb9302a.h) \
$(wildcard include/config/mach/edb9307a.h) \
$(wildcard include/config/mach/ct/dfs.h) \
$(wildcard include/config/mach/pilz/pmi4.h) \
$(wildcard include/config/mach/xceednp/ixp.h) \
$(wildcard include/config/mach/smdk2442b.h) \
$(wildcard include/config/mach/xnode.h) \
$(wildcard include/config/mach/aidx270.h) \
$(wildcard include/config/mach/rema.h) \
$(wildcard include/config/mach/bps1000.h) \
$(wildcard include/config/mach/hw90350.h) \
$(wildcard include/config/mach/omap/3430sdp.h) \
$(wildcard include/config/mach/bluetouch.h) \
$(wildcard include/config/mach/vstms.h) \
$(wildcard include/config/mach/xsbase270.h) \
$(wildcard include/config/mach/at91sam9260ek/cn.h) \
$(wildcard include/config/mach/adsturboxb.h) \
$(wildcard include/config/mach/oti4110.h) \
$(wildcard include/config/mach/hme/pxa.h) \
$(wildcard include/config/mach/deisterdca.h) \
$(wildcard include/config/mach/ces/ssem2.h) \
$(wildcard include/config/mach/ces/mtr.h) \
$(wildcard include/config/mach/tds/avng/sbc.h) \
$(wildcard include/config/mach/everest.h) \
$(wildcard include/config/mach/pnx4010.h) \
$(wildcard include/config/mach/oxnas.h) \
$(wildcard include/config/mach/fiori.h) \
$(wildcard include/config/mach/ml1200.h) \
$(wildcard include/config/mach/pecos.h) \
$(wildcard include/config/mach/nb2xxx.h) \
$(wildcard include/config/mach/hw6900.h) \
$(wildcard include/config/mach/cdcs/quoll.h) \
$(wildcard include/config/mach/quicksilver.h) \
$(wildcard include/config/mach/uplat926.h) \
$(wildcard include/config/mach/dep2410/thomas.h) \
$(wildcard include/config/mach/dtk2410.h) \
$(wildcard include/config/mach/chili.h) \
$(wildcard include/config/mach/demeter.h) \
$(wildcard include/config/mach/dionysus.h) \
$(wildcard include/config/mach/as352x.h) \
$(wildcard include/config/mach/service.h) \
$(wildcard include/config/mach/cs/e9301.h) \
$(wildcard include/config/mach/micro9m.h) \
$(wildcard include/config/mach/ia/mospck.h) \
$(wildcard include/config/mach/ql201b.h) \
$(wildcard include/config/mach/bbm.h) \
$(wildcard include/config/mach/exxx.h) \
$(wildcard include/config/mach/wma11b.h) \
$(wildcard include/config/mach/pelco/atlas.h) \
$(wildcard include/config/mach/g500.h) \
$(wildcard include/config/mach/bug.h) \
$(wildcard include/config/mach/mx33ads.h) \
$(wildcard include/config/mach/chub.h) \
$(wildcard include/config/mach/neo1973/gta01.h) \
$(wildcard include/config/mach/w90n740.h) \
$(wildcard include/config/mach/medallion/sa2410.h) \
$(wildcard include/config/mach/ia/cpu/9200/2.h) \
$(wildcard include/config/mach/dimmrm9200.h) \
$(wildcard include/config/mach/pm9261.h) \
$(wildcard include/config/mach/ml7304.h) \
$(wildcard include/config/mach/ucp250.h) \
$(wildcard include/config/mach/intboard.h) \
$(wildcard include/config/mach/gulfstream.h) \
$(wildcard include/config/mach/labquest.h) \
$(wildcard include/config/mach/vcmx313.h) \
$(wildcard include/config/mach/urg200.h) \
$(wildcard include/config/mach/cpux255lcdnet.h) \
$(wildcard include/config/mach/netdcu9.h) \
$(wildcard include/config/mach/netdcu10.h) \
$(wildcard include/config/mach/dspg/dga.h) \
$(wildcard include/config/mach/dspg/dvw.h) \
$(wildcard include/config/mach/solos.h) \
$(wildcard include/config/mach/at91sam9263ek.h) \
$(wildcard include/config/mach/osstbox.h) \
$(wildcard include/config/mach/kbat9261.h) \
$(wildcard include/config/mach/ct1100.h) \
$(wildcard include/config/mach/akcppxa.h) \
$(wildcard include/config/mach/ochaya1020.h) \
$(wildcard include/config/mach/hitrack.h) \
$(wildcard include/config/mach/syme1.h) \
$(wildcard include/config/mach/syhl1.h) \
$(wildcard include/config/mach/empca400.h) \
$(wildcard include/config/mach/em7210.h) \
$(wildcard include/config/mach/htchermes.h) \
$(wildcard include/config/mach/eti/c1.h) \
$(wildcard include/config/mach/ac100.h) \
$(wildcard include/config/mach/sneetch.h) \
$(wildcard include/config/mach/studentmate.h) \
$(wildcard include/config/mach/zir2410.h) \
$(wildcard include/config/mach/zir2413.h) \
$(wildcard include/config/mach/dlonip3.h) \
$(wildcard include/config/mach/instream.h) \
$(wildcard include/config/mach/ambarella.h) \
$(wildcard include/config/mach/nevis.h) \
$(wildcard include/config/mach/htc/trinity.h) \
$(wildcard include/config/mach/ql202b.h) \
$(wildcard include/config/mach/vpac270.h) \
$(wildcard include/config/mach/rd129.h) \
$(wildcard include/config/mach/htcwizard.h) \
$(wildcard include/config/mach/treo680.h) \
$(wildcard include/config/mach/tecon/tmezon.h) \
$(wildcard include/config/mach/zylonite.h) \
$(wildcard include/config/mach/gene1270.h) \
$(wildcard include/config/mach/zir2412.h) \
$(wildcard include/config/mach/mx31lite.h) \
$(wildcard include/config/mach/t700wx.h) \
$(wildcard include/config/mach/vf100.h) \
$(wildcard include/config/mach/nsb2.h) \
$(wildcard include/config/mach/nxhmi/bb.h) \
$(wildcard include/config/mach/nxhmi/re.h) \
$(wildcard include/config/mach/n4100pro.h) \
$(wildcard include/config/mach/sam9260.h) \
$(wildcard include/config/mach/omap/treo600.h) \
$(wildcard include/config/mach/indy2410.h) \
$(wildcard include/config/mach/nelt/a.h) \
$(wildcard include/config/mach/n311.h) \
$(wildcard include/config/mach/at91sam9260vgk.h) \
$(wildcard include/config/mach/at91leppe.h) \
$(wildcard include/config/mach/at91lepccn.h) \
$(wildcard include/config/mach/apc7100.h) \
$(wildcard include/config/mach/stargazer.h) \
$(wildcard include/config/mach/sonata.h) \
$(wildcard include/config/mach/schmoogie.h) \
$(wildcard include/config/mach/aztool.h) \
$(wildcard include/config/mach/mioa701.h) \
$(wildcard include/config/mach/sxni9260.h) \
$(wildcard include/config/mach/mxc27520evb.h) \
$(wildcard include/config/mach/armadillo5x0.h) \
$(wildcard include/config/mach/mb9260.h) \
$(wildcard include/config/mach/mb9263.h) \
$(wildcard include/config/mach/ipac9302.h) \
$(wildcard include/config/mach/cc9p9360js.h) \
$(wildcard include/config/mach/gallium.h) \
$(wildcard include/config/mach/msc2410.h) \
$(wildcard include/config/mach/ghi270.h) \
$(wildcard include/config/mach/davinci/leonardo.h) \
$(wildcard include/config/mach/oiab.h) \
$(wildcard include/config/mach/smdk6400.h) \
$(wildcard include/config/mach/nokia/n800.h) \
$(wildcard include/config/mach/greenphone.h) \
$(wildcard include/config/mach/compexwp18.h) \
$(wildcard include/config/mach/xmate.h) \
$(wildcard include/config/mach/energizer.h) \
$(wildcard include/config/mach/ime1.h) \
$(wildcard include/config/mach/swedatms.h) \
$(wildcard include/config/mach/ntnp435c.h) \
$(wildcard include/config/mach/spectro2.h) \
$(wildcard include/config/mach/h6039.h) \
$(wildcard include/config/mach/ep80219.h) \
$(wildcard include/config/mach/samoa/ii.h) \
$(wildcard include/config/mach/cwmxl.h) \
$(wildcard include/config/mach/as9200.h) \
$(wildcard include/config/mach/sfx1149.h) \
$(wildcard include/config/mach/navi010.h) \
$(wildcard include/config/mach/multmdp.h) \
$(wildcard include/config/mach/scb9520.h) \
$(wildcard include/config/mach/htcathena.h) \
$(wildcard include/config/mach/xp179.h) \
$(wildcard include/config/mach/h4300.h) \
$(wildcard include/config/mach/goramo/mlr.h) \
$(wildcard include/config/mach/mxc30020evb.h) \
$(wildcard include/config/mach/adsbitsyg5.h) \
$(wildcard include/config/mach/adsportalplus.h) \
$(wildcard include/config/mach/mmsp2plus.h) \
$(wildcard include/config/mach/em/x270.h) \
$(wildcard include/config/mach/tpp302.h) \
$(wildcard include/config/mach/tpm104.h) \
$(wildcard include/config/mach/tpm102.h) \
$(wildcard include/config/mach/tpm109.h) \
$(wildcard include/config/mach/fbxo1.h) \
$(wildcard include/config/mach/hxd8.h) \
$(wildcard include/config/mach/neo1973/gta02.h) \
$(wildcard include/config/mach/emtest.h) \
$(wildcard include/config/mach/ad6900.h) \
$(wildcard include/config/mach/europa.h) \
$(wildcard include/config/mach/metroconnect.h) \
$(wildcard include/config/mach/ez/s2410.h) \
$(wildcard include/config/mach/ez/s2440.h) \
$(wildcard include/config/mach/ez/ep9312.h) \
$(wildcard include/config/mach/ez/ep9315.h) \
$(wildcard include/config/mach/ez/x7.h) \
$(wildcard include/config/mach/godotdb.h) \
$(wildcard include/config/mach/mistral.h) \
$(wildcard include/config/mach/msm.h) \
$(wildcard include/config/mach/ct5910.h) \
$(wildcard include/config/mach/ct5912.h) \
$(wildcard include/config/mach/hynet/ine.h) \
$(wildcard include/config/mach/hynet/app.h) \
$(wildcard include/config/mach/msm7200.h) \
$(wildcard include/config/mach/msm7600.h) \
$(wildcard include/config/mach/ceb255.h) \
$(wildcard include/config/mach/ciel.h) \
$(wildcard include/config/mach/slm5650.h) \
$(wildcard include/config/mach/at91sam9rlek.h) \
$(wildcard include/config/mach/comtech/router.h) \
$(wildcard include/config/mach/sbc2410x.h) \
$(wildcard include/config/mach/at4x0bd.h) \
$(wildcard include/config/mach/cbifr.h) \
$(wildcard include/config/mach/arcom/quantum.h) \
$(wildcard include/config/mach/matrix520.h) \
$(wildcard include/config/mach/matrix510.h) \
$(wildcard include/config/mach/matrix500.h) \
$(wildcard include/config/mach/m501.h) \
$(wildcard include/config/mach/aaeon1270.h) \
$(wildcard include/config/mach/matrix500ev.h) \
$(wildcard include/config/mach/pac500.h) \
$(wildcard include/config/mach/pnx8181.h) \
$(wildcard include/config/mach/colibri320.h) \
$(wildcard include/config/mach/aztoolbb.h) \
$(wildcard include/config/mach/aztoolg2.h) \
$(wildcard include/config/mach/dvlhost.h) \
$(wildcard include/config/mach/zir9200.h) \
$(wildcard include/config/mach/zir9260.h) \
$(wildcard include/config/mach/cocopah.h) \
$(wildcard include/config/mach/nds.h) \
$(wildcard include/config/mach/rosencrantz.h) \
$(wildcard include/config/mach/fttx/odsc.h) \
$(wildcard include/config/mach/classe/r6904.h) \
$(wildcard include/config/mach/cam60.h) \
$(wildcard include/config/mach/mxc30031ads.h) \
$(wildcard include/config/mach/datacall.h) \
$(wildcard include/config/mach/at91eb01.h) \
$(wildcard include/config/mach/rty.h) \
$(wildcard include/config/mach/dwl2100.h) \
$(wildcard include/config/mach/vinsi.h) \
$(wildcard include/config/mach/db88f5281.h) \
$(wildcard include/config/mach/csb726.h) \
$(wildcard include/config/mach/tik27.h) \
$(wildcard include/config/mach/mx/uc7420.h) \
$(wildcard include/config/mach/rirm3.h) \
$(wildcard include/config/mach/pelco/odyssey.h) \
$(wildcard include/config/mach/adx/abox.h) \
$(wildcard include/config/mach/adx/tpid.h) \
$(wildcard include/config/mach/minicheck.h) \
$(wildcard include/config/mach/idam.h) \
$(wildcard include/config/mach/mario/mx.h) \
$(wildcard include/config/mach/vi1888.h) \
$(wildcard include/config/mach/zr4230.h) \
$(wildcard include/config/mach/t1/ix/blue.h) \
$(wildcard include/config/mach/syhq2.h) \
$(wildcard include/config/mach/computime/r3.h) \
$(wildcard include/config/mach/oratis.h) \
$(wildcard include/config/mach/mikko.h) \
$(wildcard include/config/mach/holon.h) \
$(wildcard include/config/mach/olip8.h) \
$(wildcard include/config/mach/ghi270hg.h) \
$(wildcard include/config/mach/davinci/dm6467/evm.h) \
$(wildcard include/config/mach/davinci/dm355/evm.h) \
$(wildcard include/config/mach/blackriver.h) \
$(wildcard include/config/mach/sandgatewp.h) \
$(wildcard include/config/mach/cdotbwsg.h) \
$(wildcard include/config/mach/quark963.h) \
$(wildcard include/config/mach/csb735.h) \
$(wildcard include/config/mach/littleton.h) \
$(wildcard include/config/mach/mio/p550.h) \
$(wildcard include/config/mach/motion2440.h) \
$(wildcard include/config/mach/imm500.h) \
$(wildcard include/config/mach/homematic.h) \
$(wildcard include/config/mach/ermine.h) \
$(wildcard include/config/mach/kb9202b.h) \
$(wildcard include/config/mach/hs1xx.h) \
$(wildcard include/config/mach/studentmate2440.h) \
$(wildcard include/config/mach/arvoo/l1/z1.h) \
$(wildcard include/config/mach/dep2410k.h) \
$(wildcard include/config/mach/xxsvideo.h) \
$(wildcard include/config/mach/im4004.h) \
$(wildcard include/config/mach/ochaya1050.h) \
$(wildcard include/config/mach/lep9261.h) \
$(wildcard include/config/mach/svenmeb.h) \
$(wildcard include/config/mach/fortunet2ne.h) \
$(wildcard include/config/mach/nxhx.h) \
$(wildcard include/config/mach/realview/pb11mp.h) \
$(wildcard include/config/mach/ids500.h) \
$(wildcard include/config/mach/ors/n725.h) \
$(wildcard include/config/mach/hsdarm.h) \
$(wildcard include/config/mach/sha/pon003.h) \
$(wildcard include/config/mach/sha/pon004.h) \
$(wildcard include/config/mach/sha/pon007.h) \
$(wildcard include/config/mach/sha/pon011.h) \
$(wildcard include/config/mach/h6042.h) \
$(wildcard include/config/mach/h6043.h) \
$(wildcard include/config/mach/looxc550.h) \
$(wildcard include/config/mach/cnty/titan.h) \
$(wildcard include/config/mach/app3xx.h) \
$(wildcard include/config/mach/sideoatsgrama.h) \
$(wildcard include/config/mach/treo700p.h) \
$(wildcard include/config/mach/treo700w.h) \
$(wildcard include/config/mach/treo750.h) \
$(wildcard include/config/mach/treo755p.h) \
$(wildcard include/config/mach/ezreganut9200.h) \
$(wildcard include/config/mach/sarge.h) \
$(wildcard include/config/mach/a696.h) \
$(wildcard include/config/mach/turtle.h) \
$(wildcard include/config/mach/mx27/3ds.h) \
$(wildcard include/config/mach/bishop.h) \
$(wildcard include/config/mach/pxx.h) \
$(wildcard include/config/mach/redwood.h) \
$(wildcard include/config/mach/omap/2430dlp.h) \
$(wildcard include/config/mach/omap/2430osk.h) \
$(wildcard include/config/mach/sardine.h) \
$(wildcard include/config/mach/halibut.h) \
$(wildcard include/config/mach/trout.h) \
$(wildcard include/config/mach/goldfish.h) \
$(wildcard include/config/mach/gesbc2440.h) \
$(wildcard include/config/mach/nomad.h) \
$(wildcard include/config/mach/rosalind.h) \
$(wildcard include/config/mach/cc9p9215.h) \
$(wildcard include/config/mach/cc9p9210.h) \
$(wildcard include/config/mach/cc9p9215js.h) \
$(wildcard include/config/mach/cc9p9210js.h) \
$(wildcard include/config/mach/nasffe.h) \
$(wildcard include/config/mach/tn2x0bd.h) \
$(wildcard include/config/mach/gwmpxa.h) \
$(wildcard include/config/mach/exyplus.h) \
$(wildcard include/config/mach/jadoo21.h) \
$(wildcard include/config/mach/looxn560.h) \
$(wildcard include/config/mach/bonsai.h) \
$(wildcard include/config/mach/adsmilgato.h) \
$(wildcard include/config/mach/gba.h) \
$(wildcard include/config/mach/h6044.h) \
$(wildcard include/config/mach/app.h) \
$(wildcard include/config/mach/tct/hammer.h) \
$(wildcard include/config/mach/herald.h) \
$(wildcard include/config/mach/artemis.h) \
$(wildcard include/config/mach/htctitan.h) \
$(wildcard include/config/mach/qranium.h) \
$(wildcard include/config/mach/adx/wsc2.h) \
$(wildcard include/config/mach/adx/medcom.h) \
$(wildcard include/config/mach/bboard.h) \
$(wildcard include/config/mach/cambria.h) \
$(wildcard include/config/mach/mt7xxx.h) \
$(wildcard include/config/mach/matrix512.h) \
$(wildcard include/config/mach/matrix522.h) \
$(wildcard include/config/mach/ipac5010.h) \
$(wildcard include/config/mach/sakura.h) \
$(wildcard include/config/mach/grocx.h) \
$(wildcard include/config/mach/pm9263.h) \
$(wildcard include/config/mach/sim/one.h) \
$(wildcard include/config/mach/acq132.h) \
$(wildcard include/config/mach/datr.h) \
$(wildcard include/config/mach/actux1.h) \
$(wildcard include/config/mach/actux2.h) \
$(wildcard include/config/mach/actux3.h) \
$(wildcard include/config/mach/flexit.h) \
$(wildcard include/config/mach/bh2x0bd.h) \
$(wildcard include/config/mach/atb2002.h) \
$(wildcard include/config/mach/xenon.h) \
$(wildcard include/config/mach/fm607.h) \
$(wildcard include/config/mach/matrix514.h) \
$(wildcard include/config/mach/matrix524.h) \
$(wildcard include/config/mach/inpod.h) \
$(wildcard include/config/mach/jive.h) \
$(wildcard include/config/mach/tll/mx21.h) \
$(wildcard include/config/mach/sbc2800.h) \
$(wildcard include/config/mach/cc7ucamry.h) \
$(wildcard include/config/mach/ubisys/p9/sc15.h) \
$(wildcard include/config/mach/ubisys/p9/ssc2d10.h) \
$(wildcard include/config/mach/ubisys/p9/rcu3.h) \
$(wildcard include/config/mach/aml/m8000.h) \
$(wildcard include/config/mach/snapper/270.h) \
$(wildcard include/config/mach/omap/bbx.h) \
$(wildcard include/config/mach/ucn2410.h) \
$(wildcard include/config/mach/sam9/l9260.h) \
$(wildcard include/config/mach/eti/c2.h) \
$(wildcard include/config/mach/avalanche.h) \
$(wildcard include/config/mach/realview/pb1176.h) \
$(wildcard include/config/mach/dp1500.h) \
$(wildcard include/config/mach/apple/iphone.h) \
$(wildcard include/config/mach/yl9200.h) \
$(wildcard include/config/mach/rd88f5182.h) \
$(wildcard include/config/mach/kurobox/pro.h) \
$(wildcard include/config/mach/se/poet.h) \
$(wildcard include/config/mach/mx31/3ds.h) \
$(wildcard include/config/mach/r270.h) \
$(wildcard include/config/mach/armour21.h) \
$(wildcard include/config/mach/dt2.h) \
$(wildcard include/config/mach/vt4.h) \
$(wildcard include/config/mach/tyco320.h) \
$(wildcard include/config/mach/adma.h) \
$(wildcard include/config/mach/wp188.h) \
$(wildcard include/config/mach/corsica.h) \
$(wildcard include/config/mach/bigeye.h) \
$(wildcard include/config/mach/tll5000.h) \
$(wildcard include/config/mach/bebot.h) \
$(wildcard include/config/mach/qong.h) \
$(wildcard include/config/mach/tcompact.h) \
$(wildcard include/config/mach/puma5.h) \
$(wildcard include/config/mach/elara.h) \
$(wildcard include/config/mach/ellington.h) \
$(wildcard include/config/mach/xda/atom.h) \
$(wildcard include/config/mach/energizer2.h) \
$(wildcard include/config/mach/odin.h) \
$(wildcard include/config/mach/actux4.h) \
$(wildcard include/config/mach/esl/omap.h) \
$(wildcard include/config/mach/omap2evm.h) \
$(wildcard include/config/mach/omap3evm.h) \
$(wildcard include/config/mach/adx/pcu57.h) \
$(wildcard include/config/mach/monaco.h) \
$(wildcard include/config/mach/levante.h) \
$(wildcard include/config/mach/tmxipx425.h) \
$(wildcard include/config/mach/leep.h) \
$(wildcard include/config/mach/raad.h) \
$(wildcard include/config/mach/dns323.h) \
$(wildcard include/config/mach/ap1000.h) \
$(wildcard include/config/mach/a9sam6432.h) \
$(wildcard include/config/mach/shiny.h) \
$(wildcard include/config/mach/omap3/beagle.h) \
$(wildcard include/config/mach/csr/bdb2.h) \
$(wildcard include/config/mach/nokia/n810.h) \
$(wildcard include/config/mach/c270.h) \
$(wildcard include/config/mach/sentry.h) \
$(wildcard include/config/mach/pcm038.h) \
$(wildcard include/config/mach/anc300.h) \
$(wildcard include/config/mach/htckaiser.h) \
$(wildcard include/config/mach/sbat100.h) \
$(wildcard include/config/mach/modunorm.h) \
$(wildcard include/config/mach/pelos/twarm.h) \
$(wildcard include/config/mach/flank.h) \
$(wildcard include/config/mach/sirloin.h) \
$(wildcard include/config/mach/brisket.h) \
$(wildcard include/config/mach/chuck.h) \
$(wildcard include/config/mach/otter.h) \
$(wildcard include/config/mach/davinci/ldk.h) \
$(wildcard include/config/mach/phreedom.h) \
$(wildcard include/config/mach/sg310.h) \
$(wildcard include/config/mach/ts209.h) \
$(wildcard include/config/mach/at91cap9adk.h) \
$(wildcard include/config/mach/tion9315.h) \
$(wildcard include/config/mach/mast.h) \
$(wildcard include/config/mach/pfw.h) \
$(wildcard include/config/mach/yl/p2440.h) \
$(wildcard include/config/mach/zsbc32.h) \
$(wildcard include/config/mach/omap/pace2.h) \
$(wildcard include/config/mach/imx/pace2.h) \
$(wildcard include/config/mach/mx31moboard.h) \
$(wildcard include/config/mach/mx37/3ds.h) \
$(wildcard include/config/mach/rcc.h) \
$(wildcard include/config/mach/arm9.h) \
$(wildcard include/config/mach/vision/ep9307.h) \
$(wildcard include/config/mach/scly1000.h) \
$(wildcard include/config/mach/fontel/ep.h) \
$(wildcard include/config/mach/voiceblue3g.h) \
$(wildcard include/config/mach/tt9200.h) \
$(wildcard include/config/mach/digi2410.h) \
$(wildcard include/config/mach/terastation/pro2.h) \
$(wildcard include/config/mach/linkstation/pro.h) \
$(wildcard include/config/mach/motorola/a780.h) \
$(wildcard include/config/mach/motorola/e6.h) \
$(wildcard include/config/mach/motorola/e2.h) \
$(wildcard include/config/mach/motorola/e680.h) \
$(wildcard include/config/mach/ur2410.h) \
$(wildcard include/config/mach/tas9261.h) \
$(wildcard include/config/mach/hermes/hd.h) \
$(wildcard include/config/mach/perseo/hd.h) \
$(wildcard include/config/mach/stargazer2.h) \
$(wildcard include/config/mach/e350.h) \
$(wildcard include/config/mach/wpcm450.h) \
$(wildcard include/config/mach/cartesio.h) \
$(wildcard include/config/mach/toybox.h) \
$(wildcard include/config/mach/tx27.h) \
$(wildcard include/config/mach/ts409.h) \
$(wildcard include/config/mach/p300.h) \
$(wildcard include/config/mach/xdacomet.h) \
$(wildcard include/config/mach/dexflex2.h) \
$(wildcard include/config/mach/ow.h) \
$(wildcard include/config/mach/armebs3.h) \
$(wildcard include/config/mach/u3.h) \
$(wildcard include/config/mach/smdk2450.h) \
$(wildcard include/config/mach/rsi/ews.h) \
$(wildcard include/config/mach/tnb.h) \
$(wildcard include/config/mach/toepath.h) \
$(wildcard include/config/mach/kb9263.h) \
$(wildcard include/config/mach/mt7108.h) \
$(wildcard include/config/mach/smtr2440.h) \
$(wildcard include/config/mach/manao.h) \
$(wildcard include/config/mach/cm/x300.h) \
$(wildcard include/config/mach/gulfstream/kp.h) \
$(wildcard include/config/mach/lanreadyfn522.h) \
$(wildcard include/config/mach/arma37.h) \
$(wildcard include/config/mach/mendel.h) \
$(wildcard include/config/mach/pelco/iliad.h) \
$(wildcard include/config/mach/unit2p.h) \
$(wildcard include/config/mach/inc20otter.h) \
$(wildcard include/config/mach/at91sam9g20ek.h) \
$(wildcard include/config/mach/storcenter.h) \
$(wildcard include/config/mach/smdk6410.h) \
$(wildcard include/config/mach/u300.h) \
$(wildcard include/config/mach/u500.h) \
$(wildcard include/config/mach/ds9260.h) \
$(wildcard include/config/mach/riverrock.h) \
$(wildcard include/config/mach/scibath.h) \
$(wildcard include/config/mach/at91sam7se512ek.h) \
$(wildcard include/config/mach/wrt350n/v2.h) \
$(wildcard include/config/mach/multimedia.h) \
$(wildcard include/config/mach/marvin.h) \
$(wildcard include/config/mach/x500.h) \
$(wildcard include/config/mach/awlug4lcu.h) \
$(wildcard include/config/mach/palermoc.h) \
$(wildcard include/config/mach/omap/ldp.h) \
$(wildcard include/config/mach/ip500.h) \
$(wildcard include/config/mach/ase2.h) \
$(wildcard include/config/mach/mx35evb.h) \
$(wildcard include/config/mach/aml/m8050.h) \
$(wildcard include/config/mach/mx35/3ds.h) \
$(wildcard include/config/mach/mars.h) \
$(wildcard include/config/mach/neuros/osd2.h) \
$(wildcard include/config/mach/badger.h) \
$(wildcard include/config/mach/trizeps4wl.h) \
$(wildcard include/config/mach/trizeps5.h) \
$(wildcard include/config/mach/marlin.h) \
$(wildcard include/config/mach/ts78xx.h) \
$(wildcard include/config/mach/hpipaq214.h) \
$(wildcard include/config/mach/at572d940dcm.h) \
$(wildcard include/config/mach/ne1board.h) \
$(wildcard include/config/mach/zante.h) \
$(wildcard include/config/mach/sffsdr.h) \
$(wildcard include/config/mach/tw2662.h) \
$(wildcard include/config/mach/vf10xx.h) \
$(wildcard include/config/mach/zoran43xx.h) \
$(wildcard include/config/mach/sonix926.h) \
$(wildcard include/config/mach/celestialsemi.h) \
$(wildcard include/config/mach/cc9m2443js.h) \
$(wildcard include/config/mach/tw5334.h) \
$(wildcard include/config/mach/htcartemis.h) \
$(wildcard include/config/mach/nal/hlite.h) \
$(wildcard include/config/mach/htcvogue.h) \
$(wildcard include/config/mach/smartweb.h) \
$(wildcard include/config/mach/mv86xx.h) \
$(wildcard include/config/mach/mv87xx.h) \
$(wildcard include/config/mach/songyoungho.h) \
$(wildcard include/config/mach/younghotema.h) \
$(wildcard include/config/mach/pcm037.h) \
$(wildcard include/config/mach/mmvp.h) \
$(wildcard include/config/mach/mmap.h) \
$(wildcard include/config/mach/ptid2410.h) \
$(wildcard include/config/mach/james/926.h) \
$(wildcard include/config/mach/fm6000.h) \
$(wildcard include/config/mach/db88f6281/bp.h) \
$(wildcard include/config/mach/rd88f6192/nas.h) \
$(wildcard include/config/mach/rd88f6281.h) \
$(wildcard include/config/mach/db78x00/bp.h) \
$(wildcard include/config/mach/smdk2416.h) \
$(wildcard include/config/mach/oce/spider/si.h) \
$(wildcard include/config/mach/oce/spider/sk.h) \
$(wildcard include/config/mach/rovern6.h) \
$(wildcard include/config/mach/pelco/evolution.h) \
$(wildcard include/config/mach/wbd111.h) \
$(wildcard include/config/mach/elaracpe.h) \
$(wildcard include/config/mach/mabv3.h) \
$(wildcard include/config/mach/mv2120.h) \
$(wildcard include/config/mach/csb737.h) \
$(wildcard include/config/mach/mx51/3ds.h) \
$(wildcard include/config/mach/g900.h) \
$(wildcard include/config/mach/apf27.h) \
$(wildcard include/config/mach/ggus2000.h) \
$(wildcard include/config/mach/omap/2430/mimic.h) \
$(wildcard include/config/mach/imx27lite.h) \
$(wildcard include/config/mach/almex.h) \
$(wildcard include/config/mach/control.h) \
$(wildcard include/config/mach/mba2410.h) \
$(wildcard include/config/mach/volcano.h) \
$(wildcard include/config/mach/zenith.h) \
$(wildcard include/config/mach/muchip.h) \
$(wildcard include/config/mach/magellan.h) \
$(wildcard include/config/mach/usb/a9260.h) \
$(wildcard include/config/mach/usb/a9263.h) \
$(wildcard include/config/mach/qil/a9260.h) \
$(wildcard include/config/mach/cme9210.h) \
$(wildcard include/config/mach/hczh4.h) \
$(wildcard include/config/mach/spearbasic.h) \
$(wildcard include/config/mach/dep2440.h) \
$(wildcard include/config/mach/hdl/gxr.h) \
$(wildcard include/config/mach/hdl/gt.h) \
$(wildcard include/config/mach/hdl/4g.h) \
$(wildcard include/config/mach/s3c6000.h) \
$(wildcard include/config/mach/mmsp2/mdk.h) \
$(wildcard include/config/mach/mpx220.h) \
$(wildcard include/config/mach/kzm/arm11/01.h) \
$(wildcard include/config/mach/htc/polaris.h) \
$(wildcard include/config/mach/htc/kaiser.h) \
$(wildcard include/config/mach/lg/ks20.h) \
$(wildcard include/config/mach/hhgps.h) \
$(wildcard include/config/mach/nokia/n810/wimax.h) \
$(wildcard include/config/mach/insight.h) \
$(wildcard include/config/mach/sapphire.h) \
$(wildcard include/config/mach/csb637xo.h) \
$(wildcard include/config/mach/evisiong.h) \
$(wildcard include/config/mach/stmp37xx.h) \
$(wildcard include/config/mach/stmp378x.h) \
$(wildcard include/config/mach/tnt.h) \
$(wildcard include/config/mach/tbxt.h) \
$(wildcard include/config/mach/playmate.h) \
$(wildcard include/config/mach/pns10.h) \
$(wildcard include/config/mach/eznavi.h) \
$(wildcard include/config/mach/ps4000.h) \
$(wildcard include/config/mach/ezx/a780.h) \
$(wildcard include/config/mach/ezx/e680.h) \
$(wildcard include/config/mach/ezx/a1200.h) \
$(wildcard include/config/mach/ezx/e6.h) \
$(wildcard include/config/mach/ezx/e2.h) \
$(wildcard include/config/mach/ezx/a910.h) \
$(wildcard include/config/mach/cwmx31.h) \
$(wildcard include/config/mach/sl2312.h) \
$(wildcard include/config/mach/blenny.h) \
$(wildcard include/config/mach/ds107.h) \
$(wildcard include/config/mach/dsx07.h) \
$(wildcard include/config/mach/picocom1.h) \
$(wildcard include/config/mach/lynx/wolverine.h) \
$(wildcard include/config/mach/ubisys/p9/sc19.h) \
$(wildcard include/config/mach/kratos/low.h) \
$(wildcard include/config/mach/m700.h) \
$(wildcard include/config/mach/edmini/v2.h) \
$(wildcard include/config/mach/zipit2.h) \
$(wildcard include/config/mach/hslfemtocell.h) \
$(wildcard include/config/mach/daintree/at91.h) \
$(wildcard include/config/mach/sg560usb.h) \
$(wildcard include/config/mach/omap3/pandora.h) \
$(wildcard include/config/mach/usr8200.h) \
$(wildcard include/config/mach/s1s65k.h) \
$(wildcard include/config/mach/s2s65a.h) \
$(wildcard include/config/mach/icore.h) \
$(wildcard include/config/mach/mss2.h) \
$(wildcard include/config/mach/belmont.h) \
$(wildcard include/config/mach/asusp525.h) \
$(wildcard include/config/mach/lb88rc8480.h) \
$(wildcard include/config/mach/hipxa.h) \
$(wildcard include/config/mach/mx25/3ds.h) \
$(wildcard include/config/mach/m800.h) \
$(wildcard include/config/mach/omap3530/lv/som.h) \
$(wildcard include/config/mach/prima/evb.h) \
$(wildcard include/config/mach/mx31bt1.h) \
$(wildcard include/config/mach/atlas4/evb.h) \
$(wildcard include/config/mach/mx31cicada.h) \
$(wildcard include/config/mach/mi424wr.h) \
$(wildcard include/config/mach/axs/ultrax.h) \
$(wildcard include/config/mach/at572d940deb.h) \
$(wildcard include/config/mach/davinci/da830/evm.h) \
$(wildcard include/config/mach/ep9302.h) \
$(wildcard include/config/mach/at572d940hfeb.h) \
$(wildcard include/config/mach/cybook3.h) \
$(wildcard include/config/mach/wdg002.h) \
$(wildcard include/config/mach/sg560adsl.h) \
$(wildcard include/config/mach/nextio/n2800/ica.h) \
$(wildcard include/config/mach/dove/db.h) \
$(wildcard include/config/mach/marvell/newdb.h) \
$(wildcard include/config/mach/vandihud.h) \
$(wildcard include/config/mach/magx/e8.h) \
$(wildcard include/config/mach/magx/z6.h) \
$(wildcard include/config/mach/magx/v8.h) \
$(wildcard include/config/mach/magx/u9.h) \
$(wildcard include/config/mach/toughcf08.h) \
$(wildcard include/config/mach/zw4400.h) \
$(wildcard include/config/mach/marat91.h) \
$(wildcard include/config/mach/overo.h) \
$(wildcard include/config/mach/at2440evb.h) \
$(wildcard include/config/mach/neocore926.h) \
$(wildcard include/config/mach/wnr854t.h) \
$(wildcard include/config/mach/imx27.h) \
$(wildcard include/config/mach/moose/db.h) \
$(wildcard include/config/mach/fab4.h) \
$(wildcard include/config/mach/htcdiamond.h) \
$(wildcard include/config/mach/fiona.h) \
$(wildcard include/config/mach/mxc30030/x.h) \
$(wildcard include/config/mach/bmp1000.h) \
$(wildcard include/config/mach/logi9200.h) \
$(wildcard include/config/mach/tqma31.h) \
$(wildcard include/config/mach/ccw9p9215js.h) \
$(wildcard include/config/mach/rd88f5181l/ge.h) \
$(wildcard include/config/mach/sifmain.h) \
$(wildcard include/config/mach/sam9/l9261.h) \
$(wildcard include/config/mach/cc9m2443.h) \
$(wildcard include/config/mach/xaria300.h) \
$(wildcard include/config/mach/it9200.h) \
$(wildcard include/config/mach/rd88f5181l/fxo.h) \
$(wildcard include/config/mach/kriss/sensor.h) \
$(wildcard include/config/mach/pilz/pmi5.h) \
$(wildcard include/config/mach/jade.h) \
$(wildcard include/config/mach/ks8695/softplc.h) \
$(wildcard include/config/mach/gprisc3.h) \
$(wildcard include/config/mach/stamp9g20.h) \
$(wildcard include/config/mach/smdk6430.h) \
$(wildcard include/config/mach/smdkc100.h) \
$(wildcard include/config/mach/tavorevb.h) \
$(wildcard include/config/mach/saar.h) \
$(wildcard include/config/mach/deister/eyecam.h) \
$(wildcard include/config/mach/at91sam9m10g45ek.h) \
$(wildcard include/config/mach/linkstation/produo.h) \
$(wildcard include/config/mach/hit/b0.h) \
$(wildcard include/config/mach/adx/rmu.h) \
$(wildcard include/config/mach/xg/cpe/main.h) \
$(wildcard include/config/mach/edb9407a.h) \
$(wildcard include/config/mach/dtb9608.h) \
$(wildcard include/config/mach/em104v1.h) \
$(wildcard include/config/mach/demo.h) \
$(wildcard include/config/mach/logi9260.h) \
$(wildcard include/config/mach/mx31/exm32.h) \
$(wildcard include/config/mach/usb/a9g20.h) \
$(wildcard include/config/mach/picproje2008.h) \
$(wildcard include/config/mach/cs/e9315.h) \
$(wildcard include/config/mach/qil/a9g20.h) \
$(wildcard include/config/mach/sha/pon020.h) \
$(wildcard include/config/mach/nad.h) \
$(wildcard include/config/mach/sbc35/a9260.h) \
$(wildcard include/config/mach/sbc35/a9g20.h) \
$(wildcard include/config/mach/davinci/beginning.h) \
$(wildcard include/config/mach/uwc.h) \
$(wildcard include/config/mach/mxlads.h) \
$(wildcard include/config/mach/htcnike.h) \
$(wildcard include/config/mach/deister/pxa270.h) \
$(wildcard include/config/mach/cme9210js.h) \
$(wildcard include/config/mach/cc9p9360.h) \
$(wildcard include/config/mach/mocha.h) \
$(wildcard include/config/mach/wapd170ag.h) \
$(wildcard include/config/mach/linkstation/mini.h) \
$(wildcard include/config/mach/afeb9260.h) \
$(wildcard include/config/mach/w90x900.h) \
$(wildcard include/config/mach/w90x700.h) \
$(wildcard include/config/mach/kt300ip.h) \
$(wildcard include/config/mach/kt300ip/g20.h) \
$(wildcard include/config/mach/srcm.h) \
$(wildcard include/config/mach/wlnx/9260.h) \
$(wildcard include/config/mach/openmoko/gta03.h) \
$(wildcard include/config/mach/osprey2.h) \
$(wildcard include/config/mach/kbio9260.h) \
$(wildcard include/config/mach/ginza.h) \
$(wildcard include/config/mach/a636n.h) \
$(wildcard include/config/mach/imx27ipcam.h) \
$(wildcard include/config/mach/nemoc.h) \
$(wildcard include/config/mach/geneva.h) \
$(wildcard include/config/mach/htcpharos.h) \
$(wildcard include/config/mach/neonc.h) \
$(wildcard include/config/mach/nas7100.h) \
$(wildcard include/config/mach/teuphone.h) \
$(wildcard include/config/mach/annax/eth2.h) \
$(wildcard include/config/mach/csb733.h) \
$(wildcard include/config/mach/bk3.h) \
$(wildcard include/config/mach/omap/em32.h) \
$(wildcard include/config/mach/et9261cp.h) \
$(wildcard include/config/mach/jasperc.h) \
$(wildcard include/config/mach/issi/arm9.h) \
$(wildcard include/config/mach/ued.h) \
$(wildcard include/config/mach/esiblade.h) \
$(wildcard include/config/mach/eye02.h) \
$(wildcard include/config/mach/imx27kbd.h) \
$(wildcard include/config/mach/sst61vc010/fpga.h) \
$(wildcard include/config/mach/kixvp435.h) \
$(wildcard include/config/mach/kixnp435.h) \
$(wildcard include/config/mach/africa.h) \
$(wildcard include/config/mach/nh233.h) \
$(wildcard include/config/mach/rd88f6183ap/ge.h) \
$(wildcard include/config/mach/bcm4760.h) \
$(wildcard include/config/mach/eddy/v2.h) \
$(wildcard include/config/mach/realview/pba8.h) \
$(wildcard include/config/mach/hid/a7.h) \
$(wildcard include/config/mach/hero.h) \
$(wildcard include/config/mach/omap/poseidon.h) \
$(wildcard include/config/mach/realview/pbx.h) \
$(wildcard include/config/mach/micro9s.h) \
$(wildcard include/config/mach/mako.h) \
$(wildcard include/config/mach/xdaflame.h) \
$(wildcard include/config/mach/phidget/sbc2.h) \
$(wildcard include/config/mach/limestone.h) \
$(wildcard include/config/mach/iprobe/c32.h) \
$(wildcard include/config/mach/rut100.h) \
$(wildcard include/config/mach/asusp535.h) \
$(wildcard include/config/mach/htcraphael.h) \
$(wildcard include/config/mach/sygdg1.h) \
$(wildcard include/config/mach/sygdg2.h) \
$(wildcard include/config/mach/seoul.h) \
$(wildcard include/config/mach/salerno.h) \
$(wildcard include/config/mach/ucn/s3c64xx.h) \
$(wildcard include/config/mach/msm7201a.h) \
$(wildcard include/config/mach/lpr1.h) \
$(wildcard include/config/mach/armadillo500fx.h) \
$(wildcard include/config/mach/g3evm.h) \
$(wildcard include/config/mach/z3/dm355.h) \
$(wildcard include/config/mach/w90p910evb.h) \
$(wildcard include/config/mach/w90p920evb.h) \
$(wildcard include/config/mach/w90p950evb.h) \
$(wildcard include/config/mach/w90n960evb.h) \
$(wildcard include/config/mach/camhd.h) \
$(wildcard include/config/mach/mvc100.h) \
$(wildcard include/config/mach/electrum/200.h) \
$(wildcard include/config/mach/htcjade.h) \
$(wildcard include/config/mach/memphis.h) \
$(wildcard include/config/mach/imx27sbc.h) \
$(wildcard include/config/mach/lextar.h) \
$(wildcard include/config/mach/mv88f6281gtw/ge.h) \
$(wildcard include/config/mach/ncp.h) \
$(wildcard include/config/mach/z32an.h) \
$(wildcard include/config/mach/tmq/capd.h) \
$(wildcard include/config/mach/omap3/wl.h) \
$(wildcard include/config/mach/chumby.h) \
$(wildcard include/config/mach/atsarm9.h) \
$(wildcard include/config/mach/davinci/dm365/evm.h) \
$(wildcard include/config/mach/bahamas.h) \
$(wildcard include/config/mach/das.h) \
$(wildcard include/config/mach/minidas.h) \
$(wildcard include/config/mach/vk1000.h) \
$(wildcard include/config/mach/centro.h) \
$(wildcard include/config/mach/ctera/2bay.h) \
$(wildcard include/config/mach/edgeconnect.h) \
$(wildcard include/config/mach/nd27000.h) \
$(wildcard include/config/mach/gemalto/cobra.h) \
$(wildcard include/config/mach/ingelabs/comet.h) \
$(wildcard include/config/mach/pollux/wiz.h) \
$(wildcard include/config/mach/blackstone.h) \
$(wildcard include/config/mach/topaz.h) \
$(wildcard include/config/mach/aixle.h) \
$(wildcard include/config/mach/mw998.h) \
$(wildcard include/config/mach/nokia/rx51.h) \
$(wildcard include/config/mach/vsc5605ev.h) \
$(wildcard include/config/mach/nt98700dk.h) \
$(wildcard include/config/mach/icontact.h) \
$(wildcard include/config/mach/swarco/frcpu.h) \
$(wildcard include/config/mach/swarco/scpu.h) \
$(wildcard include/config/mach/bbox/p16.h) \
$(wildcard include/config/mach/bstd.h) \
$(wildcard include/config/mach/sbc2440ii.h) \
$(wildcard include/config/mach/pcm034.h) \
$(wildcard include/config/mach/neso.h) \
$(wildcard include/config/mach/wlnx/9g20.h) \
$(wildcard include/config/mach/omap/zoom2.h) \
$(wildcard include/config/mach/totemnova.h) \
$(wildcard include/config/mach/c5000.h) \
$(wildcard include/config/mach/unipo/at91sam9263.h) \
$(wildcard include/config/mach/ethernut5.h) \
$(wildcard include/config/mach/arm11.h) \
$(wildcard include/config/mach/cpuat9260.h) \
$(wildcard include/config/mach/cpupxa255.h) \
$(wildcard include/config/mach/cpuimx27.h) \
$(wildcard include/config/mach/cheflux.h) \
$(wildcard include/config/mach/eb/cpux9k2.h) \
$(wildcard include/config/mach/opcotec.h) \
$(wildcard include/config/mach/yt.h) \
$(wildcard include/config/mach/motoq.h) \
$(wildcard include/config/mach/bsb1.h) \
$(wildcard include/config/mach/acs5k.h) \
$(wildcard include/config/mach/milan.h) \
$(wildcard include/config/mach/quartzv2.h) \
$(wildcard include/config/mach/rsvp.h) \
$(wildcard include/config/mach/rmp200.h) \
$(wildcard include/config/mach/snapper/9260.h) \
$(wildcard include/config/mach/dsm320.h) \
$(wildcard include/config/mach/adsgcm.h) \
$(wildcard include/config/mach/ase2/400.h) \
$(wildcard include/config/mach/pizza.h) \
$(wildcard include/config/mach/spot/ngpl.h) \
$(wildcard include/config/mach/armata.h) \
$(wildcard include/config/mach/exeda.h) \
$(wildcard include/config/mach/mx31sf005.h) \
$(wildcard include/config/mach/f5d8231/4/v2.h) \
$(wildcard include/config/mach/q2440.h) \
$(wildcard include/config/mach/qq2440.h) \
$(wildcard include/config/mach/mini2440.h) \
$(wildcard include/config/mach/colibri300.h) \
$(wildcard include/config/mach/jades.h) \
$(wildcard include/config/mach/spark.h) \
$(wildcard include/config/mach/benzina.h) \
$(wildcard include/config/mach/blaze.h) \
$(wildcard include/config/mach/linkstation/ls/hgl.h) \
$(wildcard include/config/mach/htcvenus.h) \
$(wildcard include/config/mach/sony/prs505.h) \
$(wildcard include/config/mach/hanlin/v3.h) \
$(wildcard include/config/mach/sapphira.h) \
$(wildcard include/config/mach/dack/sda/01.h) \
$(wildcard include/config/mach/armbox.h) \
$(wildcard include/config/mach/harris/rvp.h) \
$(wildcard include/config/mach/ribaldo.h) \
$(wildcard include/config/mach/agora.h) \
$(wildcard include/config/mach/omap3/mini.h) \
$(wildcard include/config/mach/a9sam6432/b.h) \
$(wildcard include/config/mach/usg2410.h) \
$(wildcard include/config/mach/pc72052/i10/revb.h) \
$(wildcard include/config/mach/mx35/exm32.h) \
$(wildcard include/config/mach/topas910.h) \
$(wildcard include/config/mach/hyena.h) \
$(wildcard include/config/mach/pospax.h) \
$(wildcard include/config/mach/hdl/gx.h) \
$(wildcard include/config/mach/ctera/4bay.h) \
$(wildcard include/config/mach/ctera/plug/c.h) \
$(wildcard include/config/mach/crwea/plug/i.h) \
$(wildcard include/config/mach/egauge2.h) \
$(wildcard include/config/mach/didj.h) \
$(wildcard include/config/mach/meister.h) \
$(wildcard include/config/mach/htcblackstone.h) \
$(wildcard include/config/mach/cpuat9g20.h) \
$(wildcard include/config/mach/smdk6440.h) \
$(wildcard include/config/mach/omap/35xx/mvp.h) \
$(wildcard include/config/mach/ctera/plug/i.h) \
$(wildcard include/config/mach/pvg610.h) \
$(wildcard include/config/mach/hprw6815.h) \
$(wildcard include/config/mach/omap3/oswald.h) \
$(wildcard include/config/mach/nas4220b.h) \
$(wildcard include/config/mach/htcraphael/cdma.h) \
$(wildcard include/config/mach/htcdiamond/cdma.h) \
$(wildcard include/config/mach/scaler.h) \
$(wildcard include/config/mach/zylonite2.h) \
$(wildcard include/config/mach/aspenite.h) \
$(wildcard include/config/mach/teton.h) \
$(wildcard include/config/mach/ttc/dkb.h) \
$(wildcard include/config/mach/bishop2.h) \
$(wildcard include/config/mach/ippv5.h) \
$(wildcard include/config/mach/farm926.h) \
$(wildcard include/config/mach/mmccpu.h) \
$(wildcard include/config/mach/sgmsfl.h) \
$(wildcard include/config/mach/tt8000.h) \
$(wildcard include/config/mach/zrn4300lp.h) \
$(wildcard include/config/mach/mptc.h) \
$(wildcard include/config/mach/h6051.h) \
$(wildcard include/config/mach/pvg610/101.h) \
$(wildcard include/config/mach/stamp9261/pc/evb.h) \
$(wildcard include/config/mach/pelco/odysseus.h) \
$(wildcard include/config/mach/tny/a9260.h) \
$(wildcard include/config/mach/tny/a9g20.h) \
$(wildcard include/config/mach/aesop/mp2530f.h) \
$(wildcard include/config/mach/dx900.h) \
$(wildcard include/config/mach/cpodc2.h) \
$(wildcard include/config/mach/tilt/8925.h) \
$(wildcard include/config/mach/davinci/dm357/evm.h) \
$(wildcard include/config/mach/swordfish.h) \
$(wildcard include/config/mach/corvus.h) \
$(wildcard include/config/mach/taurus.h) \
$(wildcard include/config/mach/axm.h) \
$(wildcard include/config/mach/axc.h) \
$(wildcard include/config/mach/baby.h) \
$(wildcard include/config/mach/mp200.h) \
$(wildcard include/config/mach/pcm043.h) \
$(wildcard include/config/mach/hanlin/v3c.h) \
$(wildcard include/config/mach/kbk9g20.h) \
$(wildcard include/config/mach/adsturbog5.h) \
$(wildcard include/config/mach/avenger/lite1.h) \
$(wildcard include/config/mach/suc.h) \
$(wildcard include/config/mach/at91sam7s256.h) \
$(wildcard include/config/mach/mendoza.h) \
$(wildcard include/config/mach/kira.h) \
$(wildcard include/config/mach/mx1hbm.h) \
$(wildcard include/config/mach/quatro43xx.h) \
$(wildcard include/config/mach/quatro4230.h) \
$(wildcard include/config/mach/nsb400.h) \
$(wildcard include/config/mach/drp255.h) \
$(wildcard include/config/mach/thoth.h) \
$(wildcard include/config/mach/firestone.h) \
$(wildcard include/config/mach/asusp750.h) \
$(wildcard include/config/mach/ctera/dl.h) \
$(wildcard include/config/mach/socr.h) \
$(wildcard include/config/mach/htcoxygen.h) \
$(wildcard include/config/mach/heroc.h) \
$(wildcard include/config/mach/zeno6800.h) \
$(wildcard include/config/mach/sc2mcs.h) \
$(wildcard include/config/mach/gene100.h) \
$(wildcard include/config/mach/as353x.h) \
$(wildcard include/config/mach/sheevaplug.h) \
$(wildcard include/config/mach/at91sam9g20.h) \
$(wildcard include/config/mach/mv88f6192gtw/fe.h) \
$(wildcard include/config/mach/cc9200.h) \
$(wildcard include/config/mach/sm9200.h) \
$(wildcard include/config/mach/tp9200.h) \
$(wildcard include/config/mach/snapperdv.h) \
$(wildcard include/config/mach/avengers/lite.h) \
$(wildcard include/config/mach/avengers/lite1.h) \
$(wildcard include/config/mach/omap3axon.h) \
$(wildcard include/config/mach/ma8xx.h) \
$(wildcard include/config/mach/mp201ek.h) \
$(wildcard include/config/mach/davinci/tux.h) \
$(wildcard include/config/mach/mpa1600.h) \
$(wildcard include/config/mach/pelco/troy.h) \
$(wildcard include/config/mach/nsb667.h) \
$(wildcard include/config/mach/rovers5/4mpix.h) \
$(wildcard include/config/mach/twocom.h) \
$(wildcard include/config/mach/ubisys/p9/rcu3r2.h) \
$(wildcard include/config/mach/hero/espresso.h) \
$(wildcard include/config/mach/afeusb.h) \
$(wildcard include/config/mach/t830.h) \
$(wildcard include/config/mach/spd8020/cc.h) \
$(wildcard include/config/mach/om/3d7k.h) \
$(wildcard include/config/mach/picocom2.h) \
$(wildcard include/config/mach/uwg4mx27.h) \
$(wildcard include/config/mach/uwg4mx31.h) \
$(wildcard include/config/mach/cherry.h) \
$(wildcard include/config/mach/mx51/babbage.h) \
$(wildcard include/config/mach/s3c2440turkiye.h) \
$(wildcard include/config/mach/tx37.h) \
$(wildcard include/config/mach/sbc2800/9g20.h) \
$(wildcard include/config/mach/benzglb.h) \
$(wildcard include/config/mach/benztd.h) \
$(wildcard include/config/mach/cartesio/plus.h) \
$(wildcard include/config/mach/solrad/g20.h) \
$(wildcard include/config/mach/mx27wallace.h) \
$(wildcard include/config/mach/fmzwebmodul.h) \
$(wildcard include/config/mach/rd78x00/masa.h) \
$(wildcard include/config/mach/smallogger.h) \
$(wildcard include/config/mach/ccw9p9215.h) \
$(wildcard include/config/mach/dm355/leopard.h) \
$(wildcard include/config/mach/ts219.h) \
$(wildcard include/config/mach/tny/a9263.h) \
$(wildcard include/config/mach/apollo.h) \
$(wildcard include/config/mach/at91cap9stk.h) \
$(wildcard include/config/mach/spc300.h) \
$(wildcard include/config/mach/eko.h) \
$(wildcard include/config/mach/ccw9m2443.h) \
$(wildcard include/config/mach/ccw9m2443js.h) \
$(wildcard include/config/mach/m2m/router/device.h) \
$(wildcard include/config/mach/star9104nas.h) \
$(wildcard include/config/mach/pca100.h) \
$(wildcard include/config/mach/z3/dm365/mod/01.h) \
$(wildcard include/config/mach/hipox.h) \
$(wildcard include/config/mach/omap3/piteds.h) \
$(wildcard include/config/mach/bm150r.h) \
$(wildcard include/config/mach/tbone.h) \
$(wildcard include/config/mach/merlin.h) \
$(wildcard include/config/mach/falcon.h) \
$(wildcard include/config/mach/davinci/da850/evm.h) \
$(wildcard include/config/mach/s5p6440.h) \
$(wildcard include/config/mach/at91sam9g10ek.h) \
$(wildcard include/config/mach/omap/4430sdp.h) \
$(wildcard include/config/mach/lpc313x.h) \
$(wildcard include/config/mach/magx/zn5.h) \
$(wildcard include/config/mach/magx/em30.h) \
$(wildcard include/config/mach/magx/ve66.h) \
$(wildcard include/config/mach/meesc.h) \
$(wildcard include/config/mach/otc570.h) \
$(wildcard include/config/mach/bcu2412.h) \
$(wildcard include/config/mach/beacon.h) \
$(wildcard include/config/mach/actia/tgw.h) \
$(wildcard include/config/mach/e4430.h) \
$(wildcard include/config/mach/ql300.h) \
$(wildcard include/config/mach/btmavb101.h) \
$(wildcard include/config/mach/btmawb101.h) \
$(wildcard include/config/mach/sq201.h) \
$(wildcard include/config/mach/quatro45xx.h) \
$(wildcard include/config/mach/openpad.h) \
$(wildcard include/config/mach/tx25.h) \
$(wildcard include/config/mach/omap3/torpedo.h) \
$(wildcard include/config/mach/htcraphael/k.h) \
$(wildcard include/config/mach/lal43.h) \
$(wildcard include/config/mach/htcraphael/cdma500.h) \
$(wildcard include/config/mach/anw6410.h) \
$(wildcard include/config/mach/htcprophet.h) \
$(wildcard include/config/mach/cfa/10022.h) \
$(wildcard include/config/mach/imx27/visstrim/m10.h) \
$(wildcard include/config/mach/px2imx27.h) \
$(wildcard include/config/mach/stm3210e/eval.h) \
$(wildcard include/config/mach/dvs10.h) \
$(wildcard include/config/mach/portuxg20.h) \
$(wildcard include/config/mach/arm/spv.h) \
$(wildcard include/config/mach/smdkc110.h) \
$(wildcard include/config/mach/cabespresso.h) \
$(wildcard include/config/mach/hmc800.h) \
$(wildcard include/config/mach/sholes.h) \
$(wildcard include/config/mach/btmxc31.h) \
$(wildcard include/config/mach/dt501.h) \
$(wildcard include/config/mach/ktx.h) \
$(wildcard include/config/mach/omap3517evm.h) \
$(wildcard include/config/mach/netspace/v2.h) \
$(wildcard include/config/mach/netspace/max/v2.h) \
$(wildcard include/config/mach/d2net/v2.h) \
$(wildcard include/config/mach/net2big/v2.h) \
$(wildcard include/config/mach/net4big/v2.h) \
$(wildcard include/config/mach/net5big/v2.h) \
$(wildcard include/config/mach/endb2443.h) \
$(wildcard include/config/mach/inetspace/v2.h) \
$(wildcard include/config/mach/tros.h) \
$(wildcard include/config/mach/pelco/homer.h) \
$(wildcard include/config/mach/ofsp8.h) \
$(wildcard include/config/mach/at91sam9g45ekes.h) \
$(wildcard include/config/mach/guf/cupid.h) \
$(wildcard include/config/mach/eab1r.h) \
$(wildcard include/config/mach/cordoba.h) \
$(wildcard include/config/mach/irvine.h) \
$(wildcard include/config/mach/sff772.h) \
$(wildcard include/config/mach/pelco/milano.h) \
$(wildcard include/config/mach/pc7302.h) \
$(wildcard include/config/mach/bip6000.h) \
$(wildcard include/config/mach/silvermoon.h) \
$(wildcard include/config/mach/vc0830.h) \
$(wildcard include/config/mach/dt430.h) \
$(wildcard include/config/mach/ji42pf.h) \
$(wildcard include/config/mach/gnet/ksm.h) \
$(wildcard include/config/mach/gnet/sgm.h) \
$(wildcard include/config/mach/gnet/sgr.h) \
$(wildcard include/config/mach/omap3/icetekevm.h) \
$(wildcard include/config/mach/pnp.h) \
$(wildcard include/config/mach/ctera/2bay/k.h) \
$(wildcard include/config/mach/ctera/2bay/u.h) \
$(wildcard include/config/mach/sas/c.h) \
$(wildcard include/config/mach/vma2315.h) \
$(wildcard include/config/mach/vcs.h) \
$(wildcard include/config/mach/spear600.h) \
$(wildcard include/config/mach/spear300.h) \
$(wildcard include/config/mach/spear1300.h) \
$(wildcard include/config/mach/lilly1131.h) \
$(wildcard include/config/mach/arvoo/ax301.h) \
$(wildcard include/config/mach/mapphone.h) \
$(wildcard include/config/mach/legend.h) \
$(wildcard include/config/mach/salsa.h) \
$(wildcard include/config/mach/lounge.h) \
$(wildcard include/config/mach/vision.h) \
$(wildcard include/config/mach/vmb20.h) \
$(wildcard include/config/mach/hy2410.h) \
$(wildcard include/config/mach/hy9315.h) \
$(wildcard include/config/mach/bullwinkle.h) \
$(wildcard include/config/mach/arm/ultimator2.h) \
$(wildcard include/config/mach/vs/v210.h) \
$(wildcard include/config/mach/vs/v212.h) \
$(wildcard include/config/mach/hmt.h) \
$(wildcard include/config/mach/suen3.h) \
$(wildcard include/config/mach/vesper.h) \
$(wildcard include/config/mach/str9.h) \
$(wildcard include/config/mach/omap3/wl/ff.h) \
$(wildcard include/config/mach/simcom.h) \
$(wildcard include/config/mach/mcwebio.h) \
$(wildcard include/config/mach/omap3/phrazer.h) \
$(wildcard include/config/mach/darwin.h) \
$(wildcard include/config/mach/oratiscomu.h) \
$(wildcard include/config/mach/rtsbc20.h) \
$(wildcard include/config/mach/i780.h) \
$(wildcard include/config/mach/gemini324.h) \
$(wildcard include/config/mach/oratislan.h) \
$(wildcard include/config/mach/oratisalog.h) \
$(wildcard include/config/mach/oratismadi.h) \
$(wildcard include/config/mach/oratisot16.h) \
$(wildcard include/config/mach/oratisdesk.h) \
$(wildcard include/config/mach/v2p/ca9.h) \
$(wildcard include/config/mach/sintexo.h) \
$(wildcard include/config/mach/cm3389.h) \
$(wildcard include/config/mach/omap3/cio.h) \
$(wildcard include/config/mach/sgh/i900.h) \
$(wildcard include/config/mach/bst100.h) \
$(wildcard include/config/mach/passion.h) \
$(wildcard include/config/mach/indesign/at91sam.h) \
$(wildcard include/config/mach/c4/badger.h) \
$(wildcard include/config/mach/c4/viper.h) \
$(wildcard include/config/mach/d2net.h) \
$(wildcard include/config/mach/bigdisk.h) \
$(wildcard include/config/mach/notalvision.h) \
$(wildcard include/config/mach/omap3/kboc.h) \
$(wildcard include/config/mach/cyclone.h) \
$(wildcard include/config/mach/ninja.h) \
$(wildcard include/config/mach/at91sam9g20ek/2mmc.h) \
$(wildcard include/config/mach/bcmring.h) \
$(wildcard include/config/mach/resol/dl2.h) \
$(wildcard include/config/mach/ifosw.h) \
$(wildcard include/config/mach/htcrhodium.h) \
$(wildcard include/config/mach/htctopaz.h) \
$(wildcard include/config/mach/matrix504.h) \
$(wildcard include/config/mach/mrfsa.h) \
$(wildcard include/config/mach/sc/p270.h) \
$(wildcard include/config/mach/atlas5/evb.h) \
$(wildcard include/config/mach/pelco/lobox.h) \
$(wildcard include/config/mach/dilax/pcu200.h) \
$(wildcard include/config/mach/leonardo.h) \
$(wildcard include/config/mach/zoran/approach7.h) \
$(wildcard include/config/mach/dp6xx.h) \
$(wildcard include/config/mach/bcm2153/vesper.h) \
$(wildcard include/config/mach/passionc.h) \
$(wildcard include/config/mach/clickc.h) \
$(wildcard include/config/mach/zb/gateway.h) \
$(wildcard include/config/mach/tazcard.h) \
$(wildcard include/config/mach/tazdev.h) \
$(wildcard include/config/mach/annax/cb/arm.h) \
$(wildcard include/config/mach/annax/dm3.h) \
$(wildcard include/config/mach/cerebric.h) \
$(wildcard include/config/mach/orca.h) \
$(wildcard include/config/mach/pc9260.h) \
$(wildcard include/config/mach/ems285a.h) \
$(wildcard include/config/mach/gec2410.h) \
$(wildcard include/config/mach/gec2440.h) \
$(wildcard include/config/mach/arch/mw903.h) \
$(wildcard include/config/mach/mw2440.h) \
$(wildcard include/config/mach/ecac2378.h) \
$(wildcard include/config/mach/tazkiosk.h) \
$(wildcard include/config/mach/whiterabbit/mch.h) \
$(wildcard include/config/mach/sbox9263.h) \
$(wildcard include/config/mach/oreo.h) \
$(wildcard include/config/mach/smdk6442.h) \
$(wildcard include/config/mach/openrd/base.h) \
$(wildcard include/config/mach/incredible.h) \
$(wildcard include/config/mach/incrediblec.h) \
$(wildcard include/config/mach/heroct.h) \
$(wildcard include/config/mach/mmnet1000.h) \
$(wildcard include/config/mach/devkit8000.h) \
$(wildcard include/config/mach/devkit9000.h) \
$(wildcard include/config/mach/mx31txtr.h) \
$(wildcard include/config/mach/u380.h) \
$(wildcard include/config/mach/hualu/board.h) \
$(wildcard include/config/mach/npcmx50.h) \
$(wildcard include/config/mach/mx51/lange51.h) \
$(wildcard include/config/mach/mx51/lange52.h) \
$(wildcard include/config/mach/riom.h) \
$(wildcard include/config/mach/comcas.h) \
$(wildcard include/config/mach/wsi/mx27.h) \
$(wildcard include/config/mach/cm/t35.h) \
$(wildcard include/config/mach/net2big.h) \
$(wildcard include/config/mach/motorola/a1600.h) \
$(wildcard include/config/mach/igep0020.h) \
$(wildcard include/config/mach/igep0010.h) \
$(wildcard include/config/mach/mv6281gtwge2.h) \
$(wildcard include/config/mach/scat100.h) \
$(wildcard include/config/mach/sanmina.h) \
$(wildcard include/config/mach/momento.h) \
$(wildcard include/config/mach/nuc9xx.h) \
$(wildcard include/config/mach/nuc910evb.h) \
$(wildcard include/config/mach/nuc920evb.h) \
$(wildcard include/config/mach/nuc950evb.h) \
$(wildcard include/config/mach/nuc945evb.h) \
$(wildcard include/config/mach/nuc960evb.h) \
$(wildcard include/config/mach/nuc932evb.h) \
$(wildcard include/config/mach/nuc900.h) \
$(wildcard include/config/mach/sd1soc.h) \
$(wildcard include/config/mach/ln2440bc.h) \
$(wildcard include/config/mach/rsbc.h) \
$(wildcard include/config/mach/openrd/client.h) \
$(wildcard include/config/mach/hpipaq11x.h) \
$(wildcard include/config/mach/wayland.h) \
$(wildcard include/config/mach/acnbsx102.h) \
$(wildcard include/config/mach/hwat91.h) \
$(wildcard include/config/mach/at91sam9263cs.h) \
$(wildcard include/config/mach/csb732.h) \
$(wildcard include/config/mach/u8500.h) \
$(wildcard include/config/mach/huqiu.h) \
$(wildcard include/config/mach/mx51/kunlun.h) \
$(wildcard include/config/mach/pmt1g.h) \
$(wildcard include/config/mach/htcelf.h) \
$(wildcard include/config/mach/armadillo420.h) \
$(wildcard include/config/mach/armadillo440.h) \
$(wildcard include/config/mach/u/chip/dual/arm.h) \
$(wildcard include/config/mach/csr/bdb3.h) \
$(wildcard include/config/mach/dolby/cat1018.h) \
$(wildcard include/config/mach/hy9307.h) \
$(wildcard include/config/mach/a/es.h) \
$(wildcard include/config/mach/davinci/irif.h) \
$(wildcard include/config/mach/agama9263.h) \
$(wildcard include/config/mach/marvell/jasper.h) \
$(wildcard include/config/mach/flint.h) \
$(wildcard include/config/mach/tavorevb3.h) \
$(wildcard include/config/mach/sch/m490.h) \
$(wildcard include/config/mach/rbl01.h) \
$(wildcard include/config/mach/omnifi.h) \
$(wildcard include/config/mach/otavalo.h) \
$(wildcard include/config/mach/sienna.h) \
$(wildcard include/config/mach/htc/excalibur/s620.h) \
$(wildcard include/config/mach/htc/opal.h) \
$(wildcard include/config/mach/touchbook.h) \
$(wildcard include/config/mach/latte.h) \
$(wildcard include/config/mach/xa200.h) \
$(wildcard include/config/mach/nimrod.h) \
$(wildcard include/config/mach/cc9p9215/3g.h) \
$(wildcard include/config/mach/cc9p9215/3gjs.h) \
$(wildcard include/config/mach/tk71.h) \
$(wildcard include/config/mach/comham3525.h) \
$(wildcard include/config/mach/mx31erebus.h) \
$(wildcard include/config/mach/mcardmx27.h) \
$(wildcard include/config/mach/paradise.h) \
$(wildcard include/config/mach/tide.h) \
$(wildcard include/config/mach/wzl2440.h) \
$(wildcard include/config/mach/sdrdemo.h) \
$(wildcard include/config/mach/ethercan2.h) \
$(wildcard include/config/mach/ecmimg20.h) \
$(wildcard include/config/mach/omap/dragon.h) \
$(wildcard include/config/mach/halo.h) \
$(wildcard include/config/mach/huangshan.h) \
$(wildcard include/config/mach/vl/ma2sc.h) \
$(wildcard include/config/mach/raumfeld/rc.h) \
$(wildcard include/config/mach/raumfeld/connector.h) \
$(wildcard include/config/mach/raumfeld/speaker.h) \
$(wildcard include/config/mach/multibus/master.h) \
$(wildcard include/config/mach/multibus/pbk.h) \
$(wildcard include/config/mach/tnetv107x.h) \
$(wildcard include/config/mach/snake.h) \
$(wildcard include/config/mach/cwmx27.h) \
$(wildcard include/config/mach/sch/m480.h) \
$(wildcard include/config/mach/platypus.h) \
$(wildcard include/config/mach/pss2.h) \
$(wildcard include/config/mach/davinci/apm150.h) \
$(wildcard include/config/mach/str9100.h) \
$(wildcard include/config/mach/net5big.h) \
$(wildcard include/config/mach/seabed9263.h) \
$(wildcard include/config/mach/mx51/m2id.h) \
$(wildcard include/config/mach/octvocplus/eb.h) \
$(wildcard include/config/mach/klk/firefox.h) \
$(wildcard include/config/mach/klk/wirma.h) \
$(wildcard include/config/mach/klk/wirma/mmi.h) \
$(wildcard include/config/mach/supersonic.h) \
$(wildcard include/config/mach/liberty.h) \
$(wildcard include/config/mach/mh355.h) \
$(wildcard include/config/mach/pc7802.h) \
$(wildcard include/config/mach/gnet/sgc.h) \
$(wildcard include/config/mach/einstein15.h) \
$(wildcard include/config/mach/cmpd.h) \
$(wildcard include/config/mach/davinci/hase1.h) \
$(wildcard include/config/mach/lgeincitephone.h) \
$(wildcard include/config/mach/ea313x.h) \
$(wildcard include/config/mach/fwbd/39064.h) \
$(wildcard include/config/mach/fwbd/390128.h) \
$(wildcard include/config/mach/pelco/moe.h) \
$(wildcard include/config/mach/minimix27.h) \
$(wildcard include/config/mach/omap3/thunder.h) \
$(wildcard include/config/mach/mx27amata.h) \
$(wildcard include/config/mach/bgat1.h) \
$(wildcard include/config/mach/buzz.h) \
$(wildcard include/config/mach/mb9g20.h) \
$(wildcard include/config/mach/yushan.h) \
$(wildcard include/config/mach/lizard.h) \
$(wildcard include/config/mach/omap3polycom.h) \
$(wildcard include/config/mach/smdkv210.h) \
$(wildcard include/config/mach/bravo.h) \
$(wildcard include/config/mach/siogentoo1.h) \
$(wildcard include/config/mach/siogentoo2.h) \
$(wildcard include/config/mach/sm3k.h) \
$(wildcard include/config/mach/acer/tempo/f900.h) \
$(wildcard include/config/mach/sst61vc010/dev.h) \
$(wildcard include/config/mach/glittertind.h) \
$(wildcard include/config/mach/omap/zoom3.h) \
$(wildcard include/config/mach/omap/3630sdp.h) \
$(wildcard include/config/mach/cybook2440.h) \
$(wildcard include/config/mach/torino/s.h) \
$(wildcard include/config/mach/havana.h) \
$(wildcard include/config/mach/beaumont/11.h) \
$(wildcard include/config/mach/vanguard.h) \
$(wildcard include/config/mach/s5pc110/draco.h) \
$(wildcard include/config/mach/cartesio/two.h) \
$(wildcard include/config/mach/aster.h) \
$(wildcard include/config/mach/voguesv210.h) \
$(wildcard include/config/mach/acm500x.h) \
$(wildcard include/config/mach/km9260.h) \
$(wildcard include/config/mach/nideflexg1.h) \
$(wildcard include/config/mach/ctera/plug/io.h) \
$(wildcard include/config/mach/smartq7.h) \
$(wildcard include/config/mach/at91sam9g10ek2.h) \
$(wildcard include/config/mach/asusp527.h) \
$(wildcard include/config/mach/at91sam9g20mpm2.h) \
$(wildcard include/config/mach/topasa900.h) \
$(wildcard include/config/mach/electrum/100.h) \
$(wildcard include/config/mach/mx51grb.h) \
$(wildcard include/config/mach/xea300.h) \
$(wildcard include/config/mach/htcstartrek.h) \
$(wildcard include/config/mach/lima.h) \
$(wildcard include/config/mach/csb740.h) \
$(wildcard include/config/mach/usb/s8815.h) \
$(wildcard include/config/mach/watson/efm/plugin.h) \
$(wildcard include/config/mach/milkyway.h) \
$(wildcard include/config/mach/g4evm.h) \
$(wildcard include/config/mach/picomod6.h) \
$(wildcard include/config/mach/omapl138/hawkboard.h) \
$(wildcard include/config/mach/ip6000.h) \
$(wildcard include/config/mach/ip6010.h) \
$(wildcard include/config/mach/utm400.h) \
$(wildcard include/config/mach/omap3/zybex.h) \
$(wildcard include/config/mach/wireless/space.h) \
$(wildcard include/config/mach/sx560.h) \
$(wildcard include/config/mach/ts41x.h) \
$(wildcard include/config/mach/elphel10373.h) \
$(wildcard include/config/mach/rhobot.h) \
$(wildcard include/config/mach/mx51/refresh.h) \
$(wildcard include/config/mach/ls9260.h) \
$(wildcard include/config/mach/shank.h) \
$(wildcard include/config/mach/qsd8x50/st1.h) \
$(wildcard include/config/mach/at91sam9m10ekes.h) \
$(wildcard include/config/mach/hiram.h) \
$(wildcard include/config/mach/phy3250.h) \
$(wildcard include/config/mach/ea3250.h) \
$(wildcard include/config/mach/fdi3250.h) \
$(wildcard include/config/mach/whitestone.h) \
$(wildcard include/config/mach/at91sam9263nit.h) \
$(wildcard include/config/mach/ccmx51.h) \
$(wildcard include/config/mach/ccmx51js.h) \
$(wildcard include/config/mach/ccwmx51.h) \
$(wildcard include/config/mach/ccwmx51js.h) \
$(wildcard include/config/mach/mini6410.h) \
$(wildcard include/config/mach/tiny6410.h) \
$(wildcard include/config/mach/nano6410.h) \
$(wildcard include/config/mach/at572d940hfnldb.h) \
$(wildcard include/config/mach/htcleo.h) \
$(wildcard include/config/mach/avp13.h) \
$(wildcard include/config/mach/xxsvideod.h) \
$(wildcard include/config/mach/vpnext.h) \
$(wildcard include/config/mach/swarco/itc3.h) \
$(wildcard include/config/mach/tx51.h) \
$(wildcard include/config/mach/dolby/cat1021.h) \
$(wildcard include/config/mach/mx28evk.h) \
$(wildcard include/config/mach/phoenix260.h) \
$(wildcard include/config/mach/uvaca/stork.h) \
$(wildcard include/config/mach/smartq5.h) \
$(wildcard include/config/mach/all3078.h) \
$(wildcard include/config/mach/ctera/2bay/ds.h) \
$(wildcard include/config/mach/siogentoo3.h) \
$(wildcard include/config/mach/epb5000.h) \
$(wildcard include/config/mach/hy9263.h) \
$(wildcard include/config/mach/acer/tempo/m900.h) \
$(wildcard include/config/mach/acer/tempo/dx900.h) \
$(wildcard include/config/mach/acer/tempo/x960.h) \
$(wildcard include/config/mach/acer/eten/v900.h) \
$(wildcard include/config/mach/acer/eten/x900.h) \
$(wildcard include/config/mach/bonnell.h) \
$(wildcard include/config/mach/oht/mx27.h) \
$(wildcard include/config/mach/htcquartz.h) \
$(wildcard include/config/mach/davinci/dm6467tevm.h) \
$(wildcard include/config/mach/c3ax03.h) \
$(wildcard include/config/mach/mxt/td60.h) \
$(wildcard include/config/mach/esyx.h) \
$(wildcard include/config/mach/dove/db2.h) \
$(wildcard include/config/mach/bulldog.h) \
$(wildcard include/config/mach/derell/me2000.h) \
$(wildcard include/config/mach/bcmring/base.h) \
$(wildcard include/config/mach/bcmring/evm.h) \
$(wildcard include/config/mach/bcmring/evm/jazz.h) \
$(wildcard include/config/mach/bcmring/sp.h) \
$(wildcard include/config/mach/bcmring/sv.h) \
$(wildcard include/config/mach/bcmring/sv/jazz.h) \
$(wildcard include/config/mach/bcmring/tablet.h) \
$(wildcard include/config/mach/bcmring/vp.h) \
$(wildcard include/config/mach/bcmring/evm/seikor.h) \
$(wildcard include/config/mach/bcmring/sp/wqvga.h) \
$(wildcard include/config/mach/bcmring/custom.h) \
$(wildcard include/config/mach/acer/s200.h) \
$(wildcard include/config/mach/bt270.h) \
$(wildcard include/config/mach/iseo.h) \
$(wildcard include/config/mach/cezanne.h) \
$(wildcard include/config/mach/lucca.h) \
$(wildcard include/config/mach/supersmart.h) \
$(wildcard include/config/mach/cs/misano.h) \
$(wildcard include/config/mach/magnolia2.h) \
$(wildcard include/config/mach/emxx.h) \
$(wildcard include/config/mach/outlaw.h) \
$(wildcard include/config/mach/riot/bei2.h) \
$(wildcard include/config/mach/riot/vox.h) \
$(wildcard include/config/mach/riot/x37.h) \
$(wildcard include/config/mach/mega25mx.h) \
$(wildcard include/config/mach/benzina2.h) \
$(wildcard include/config/mach/ignite.h) \
$(wildcard include/config/mach/foggia.h) \
$(wildcard include/config/mach/arezzo.h) \
$(wildcard include/config/mach/leica/skywalker.h) \
$(wildcard include/config/mach/jacinto2/jamr.h) \
$(wildcard include/config/mach/gts/nova.h) \
$(wildcard include/config/mach/p3600.h) \
$(wildcard include/config/mach/dlt2.h) \
$(wildcard include/config/mach/df3120.h) \
$(wildcard include/config/mach/ecucore/9g20.h) \
$(wildcard include/config/mach/nautel/lpc3240.h) \
$(wildcard include/config/mach/glacier.h) \
$(wildcard include/config/mach/phrazer/bulldog.h) \
$(wildcard include/config/mach/omap3/bulldog.h) \
$(wildcard include/config/mach/pca101.h) \
$(wildcard include/config/mach/buzzc.h) \
$(wildcard include/config/mach/sasie2.h) \
$(wildcard include/config/mach/davinci/cio.h) \
$(wildcard include/config/mach/smartmeter/dl.h) \
$(wildcard include/config/mach/wzl6410.h) \
$(wildcard include/config/mach/wzl6410m.h) \
$(wildcard include/config/mach/wzl6410f.h) \
$(wildcard include/config/mach/wzl6410i.h) \
$(wildcard include/config/mach/spacecom1.h) \
$(wildcard include/config/mach/pingu920.h) \
$(wildcard include/config/mach/bravoc.h) \
$(wildcard include/config/mach/cybo2440.h) \
$(wildcard include/config/mach/vdssw.h) \
$(wildcard include/config/mach/romulus.h) \
$(wildcard include/config/mach/omap/magic.h) \
$(wildcard include/config/mach/eltd100.h) \
$(wildcard include/config/mach/capc7117.h) \
$(wildcard include/config/mach/swan.h) \
$(wildcard include/config/mach/veu.h) \
$(wildcard include/config/mach/rm2.h) \
$(wildcard include/config/mach/tt2100.h) \
$(wildcard include/config/mach/venice.h) \
$(wildcard include/config/mach/pc7323.h) \
$(wildcard include/config/mach/masp.h) \
$(wildcard include/config/mach/fujitsu/tvstbsoc.h) \
$(wildcard include/config/mach/fujitsu/tvstbsoc1.h) \
$(wildcard include/config/mach/lexikon.h) \
$(wildcard include/config/mach/mini2440v2.h) \
$(wildcard include/config/mach/icontrol.h) \
$(wildcard include/config/mach/sheevad.h) \
$(wildcard include/config/mach/qsd8x50a/st1/1.h) \
$(wildcard include/config/mach/qsd8x50a/st1/5.h) \
$(wildcard include/config/mach/bee.h) \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/sizes.h \
include/asm-generic/memory_model.h \
$(wildcard include/config/flatmem.h) \
$(wildcard include/config/sparsemem/vmemmap.h) \
$(wildcard include/config/sparsemem.h) \
include/linux/irqflags.h \
$(wildcard include/config/trace/irqflags.h) \
$(wildcard include/config/irqsoff/tracer.h) \
$(wildcard include/config/preempt/tracer.h) \
$(wildcard include/config/trace/irqflags/support.h) \
$(wildcard include/config/x86.h) \
include/linux/typecheck.h \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/irqflags.h \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/ptrace.h \
$(wildcard include/config/arm/thumb.h) \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/hwcap.h \
include/asm-generic/cmpxchg-local.h \
include/asm-generic/cmpxchg.h \
include/asm-generic/bitops/non-atomic.h \
include/asm-generic/bitops/fls64.h \
include/asm-generic/bitops/sched.h \
include/asm-generic/bitops/hweight.h \
include/asm-generic/bitops/lock.h \
include/linux/log2.h \
$(wildcard include/config/arch/has/ilog2/u32.h) \
$(wildcard include/config/arch/has/ilog2/u64.h) \
include/linux/ratelimit.h \
include/linux/param.h \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/param.h \
$(wildcard include/config/hz.h) \
include/linux/dynamic_printk.h \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/byteorder.h \
include/linux/byteorder/little_endian.h \
include/linux/swab.h \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/swab.h \
include/linux/byteorder/generic.h \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/bug.h \
$(wildcard include/config/bug.h) \
$(wildcard include/config/debug/bugverbose.h) \
include/asm-generic/bug.h \
$(wildcard include/config/generic/bug.h) \
$(wildcard include/config/generic/bug/relative/pointers.h) \
include/linux/file.h \
include/linux/fs.h \
$(wildcard include/config/dnotify.h) \
$(wildcard include/config/sysfs.h) \
$(wildcard include/config/quota.h) \
$(wildcard include/config/inotify.h) \
$(wildcard include/config/security.h) \
$(wildcard include/config/preempt.h) \
$(wildcard include/config/epoll.h) \
$(wildcard include/config/debug/writecount.h) \
$(wildcard include/config/file/locking.h) \
$(wildcard include/config/auditsyscall.h) \
$(wildcard include/config/block.h) \
$(wildcard include/config/fs/xip.h) \
$(wildcard include/config/migration.h) \
include/linux/limits.h \
include/linux/ioctl.h \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/ioctl.h \
include/asm-generic/ioctl.h \
include/linux/wait.h \
$(wildcard include/config/lockdep.h) \
$(wildcard include/config/debug/lock/alloc.h) \
include/linux/list.h \
$(wildcard include/config/debug/list.h) \
include/linux/poison.h \
include/linux/prefetch.h \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/processor.h \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/cache.h \
$(wildcard include/config/arm/l1/cache/shift.h) \
$(wildcard include/config/aeabi.h) \
include/linux/spinlock.h \
$(wildcard include/config/debug/spinlock.h) \
$(wildcard include/config/generic/lockbreak.h) \
include/linux/preempt.h \
$(wildcard include/config/debug/preempt.h) \
$(wildcard include/config/preempt/notifiers.h) \
include/linux/thread_info.h \
$(wildcard include/config/compat.h) \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/thread_info.h \
$(wildcard include/config/arm/thumbee.h) \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/fpstate.h \
$(wildcard include/config/vfpv3.h) \
$(wildcard include/config/iwmmxt.h) \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/domain.h \
$(wildcard include/config/verify/permission/fault.h) \
$(wildcard include/config/io/36.h) \
include/linux/stringify.h \
include/linux/bottom_half.h \
include/linux/spinlock_types.h \
include/linux/spinlock_types_up.h \
include/linux/lockdep.h \
$(wildcard include/config/lock/stat.h) \
$(wildcard include/config/generic/hardirqs.h) \
include/linux/spinlock_up.h \
include/linux/spinlock_api_up.h \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/atomic.h \
include/asm-generic/atomic.h \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/current.h \
include/linux/kdev_t.h \
include/linux/dcache.h \
include/linux/rculist.h \
include/linux/rcupdate.h \
$(wildcard include/config/classic/rcu.h) \
$(wildcard include/config/tree/rcu.h) \
$(wildcard include/config/preempt/rcu.h) \
include/linux/cache.h \
$(wildcard include/config/arch/has/cache/line/size.h) \
include/linux/threads.h \
$(wildcard include/config/nr/cpus.h) \
$(wildcard include/config/base/small.h) \
include/linux/percpu.h \
$(wildcard include/config/modules.h) \
include/linux/slab.h \
$(wildcard include/config/slab/debug.h) \
$(wildcard include/config/debug/objects.h) \
$(wildcard include/config/slub.h) \
$(wildcard include/config/slob.h) \
$(wildcard include/config/debug/slab.h) \
include/linux/gfp.h \
$(wildcard include/config/zone/dma32.h) \
$(wildcard include/config/highmem.h) \
include/linux/mmzone.h \
$(wildcard include/config/force/max/zoneorder.h) \
$(wildcard include/config/unevictable/lru.h) \
$(wildcard include/config/memory/hotplug.h) \
$(wildcard include/config/arch/populates/node/map.h) \
$(wildcard include/config/flat/node/mem/map.h) \
$(wildcard include/config/cgroup/mem/res/ctlr.h) \
$(wildcard include/config/have/memory/present.h) \
$(wildcard include/config/need/node/memmap/size.h) \
$(wildcard include/config/need/multiple/nodes.h) \
$(wildcard include/config/have/arch/early/pfn/to/nid.h) \
$(wildcard include/config/sparsemem/extreme.h) \
$(wildcard include/config/nodes/span/other/nodes.h) \
$(wildcard include/config/holes/in/zone.h) \
$(wildcard include/config/arch/has/holes/memorymodel.h) \
include/linux/numa.h \
$(wildcard include/config/nodes/shift.h) \
include/linux/init.h \
$(wildcard include/config/hotplug.h) \
include/linux/seqlock.h \
include/linux/nodemask.h \
include/linux/bitmap.h \
include/linux/string.h \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/string.h \
include/linux/pageblock-flags.h \
$(wildcard include/config/hugetlb/page.h) \
$(wildcard include/config/hugetlb/page/size/variable.h) \
include/linux/bounds.h \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/page.h \
$(wildcard include/config/cpu/copy/v3.h) \
$(wildcard include/config/cpu/copy/v4wt.h) \
$(wildcard include/config/cpu/copy/v4wb.h) \
$(wildcard include/config/cpu/copy/feroceon.h) \
$(wildcard include/config/cpu/xscale.h) \
$(wildcard include/config/cpu/copy/v6.h) \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/glue.h \
$(wildcard include/config/cpu/arm610.h) \
$(wildcard include/config/cpu/arm710.h) \
$(wildcard include/config/cpu/abrt/lv4t.h) \
$(wildcard include/config/cpu/abrt/ev4.h) \
$(wildcard include/config/cpu/abrt/ev4t.h) \
$(wildcard include/config/cpu/abrt/ev5tj.h) \
$(wildcard include/config/cpu/abrt/ev5t.h) \
$(wildcard include/config/cpu/abrt/ev6.h) \
$(wildcard include/config/cpu/abrt/ev7.h) \
$(wildcard include/config/cpu/pabrt/ifar.h) \
$(wildcard include/config/cpu/pabrt/noifar.h) \
include/asm-generic/page.h \
include/linux/memory_hotplug.h \
$(wildcard include/config/have/arch/nodedata/extension.h) \
$(wildcard include/config/memory/hotremove.h) \
include/linux/notifier.h \
include/linux/errno.h \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/errno.h \
include/asm-generic/errno.h \
include/asm-generic/errno-base.h \
include/linux/mutex.h \
$(wildcard include/config/debug/mutexes.h) \
include/linux/mutex-debug.h \
include/linux/rwsem.h \
$(wildcard include/config/rwsem/generic/spinlock.h) \
include/linux/rwsem-spinlock.h \
include/linux/srcu.h \
include/linux/topology.h \
$(wildcard include/config/sched/smt.h) \
$(wildcard include/config/sched/mc.h) \
include/linux/cpumask.h \
$(wildcard include/config/disable/obsolete/cpumask/functions.h) \
$(wildcard include/config/hotplug/cpu.h) \
$(wildcard include/config/cpumask/offstack.h) \
$(wildcard include/config/debug/per/cpu/maps.h) \
include/linux/smp.h \
$(wildcard include/config/use/generic/smp/helpers.h) \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/topology.h \
include/asm-generic/topology.h \
include/linux/slab_def.h \
include/linux/kmalloc_sizes.h \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/percpu.h \
include/asm-generic/percpu.h \
$(wildcard include/config/have/setup/per/cpu/area.h) \
include/linux/completion.h \
include/linux/rcuclassic.h \
$(wildcard include/config/rcu/cpu/stall/detector.h) \
include/linux/path.h \
include/linux/stat.h \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/stat.h \
include/linux/time.h \
include/linux/math64.h \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/div64.h \
include/linux/kobject.h \
include/linux/sysfs.h \
include/linux/kref.h \
include/linux/radix-tree.h \
include/linux/prio_tree.h \
include/linux/pid.h \
include/linux/capability.h \
$(wildcard include/config/security/file/capabilities.h) \
include/linux/semaphore.h \
include/linux/fiemap.h \
include/linux/quota.h \
include/linux/dqblk_xfs.h \
include/linux/dqblk_v1.h \
include/linux/dqblk_v2.h \
include/linux/dqblk_qtree.h \
include/linux/nfs_fs_i.h \
include/linux/nfs.h \
include/linux/sunrpc/msg_prot.h \
include/linux/fcntl.h \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/fcntl.h \
include/asm-generic/fcntl.h \
include/linux/err.h \
include/linux/mm.h \
$(wildcard include/config/sysctl.h) \
$(wildcard include/config/stack/growsup.h) \
$(wildcard include/config/swap.h) \
$(wildcard include/config/shmem.h) \
$(wildcard include/config/proc/fs.h) \
$(wildcard include/config/ia64.h) \
$(wildcard include/config/debug/pagealloc.h) \
$(wildcard include/config/hibernation.h) \
include/linux/mmdebug.h \
$(wildcard include/config/debug/vm.h) \
$(wildcard include/config/debug/virtual.h) \
include/linux/rbtree.h \
include/linux/debug_locks.h \
$(wildcard include/config/debug/locking/api/selftests.h) \
include/linux/mm_types.h \
$(wildcard include/config/split/ptlock/cpus.h) \
$(wildcard include/config/mm/owner.h) \
$(wildcard include/config/mmu/notifier.h) \
include/linux/auxvec.h \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/auxvec.h \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/mmu.h \
$(wildcard include/config/cpu/has/asid.h) \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/pgtable.h \
include/asm-generic/4level-fixup.h \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/proc-fns.h \
$(wildcard include/config/cpu/32.h) \
$(wildcard include/config/cpu/arm7tdmi.h) \
$(wildcard include/config/cpu/arm720t.h) \
$(wildcard include/config/cpu/arm740t.h) \
$(wildcard include/config/cpu/arm9tdmi.h) \
$(wildcard include/config/cpu/arm920t.h) \
$(wildcard include/config/cpu/arm922t.h) \
$(wildcard include/config/cpu/arm925t.h) \
$(wildcard include/config/cpu/arm926t.h) \
$(wildcard include/config/cpu/arm940t.h) \
$(wildcard include/config/cpu/arm946e.h) \
$(wildcard include/config/cpu/arm1020.h) \
$(wildcard include/config/cpu/arm1020e.h) \
$(wildcard include/config/cpu/arm1022.h) \
$(wildcard include/config/cpu/arm1026.h) \
$(wildcard include/config/cpu/feroceon.h) \
$(wildcard include/config/cpu/v6.h) \
$(wildcard include/config/cpu/v7.h) \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/cpu-single.h \
arch/arm/mach-msm/include/mach/vmalloc.h \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/pgtable-hwdef.h \
include/asm-generic/pgtable.h \
include/linux/page-flags.h \
$(wildcard include/config/pageflags/extended.h) \
$(wildcard include/config/ia64/uncached/allocator.h) \
$(wildcard include/config/s390.h) \
include/linux/vmstat.h \
$(wildcard include/config/vm/event/counters.h) \
include/linux/pagemap.h \
include/linux/highmem.h \
include/linux/uaccess.h \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/uaccess.h \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/cacheflush.h \
$(wildcard include/config/cpu/cache/v3.h) \
$(wildcard include/config/cpu/cache/v4.h) \
$(wildcard include/config/cpu/cache/v4wb.h) \
$(wildcard include/config/outer/cache.h) \
$(wildcard include/config/cpu/cache/vipt.h) \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/shmparam.h \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/cachetype.h \
$(wildcard include/config/cpu/cache/vivt.h) \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/kmap_types.h \
include/linux/hardirq.h \
$(wildcard include/config/virt/cpu/accounting.h) \
$(wildcard include/config/no/hz.h) \
include/linux/smp_lock.h \
$(wildcard include/config/lock/kernel.h) \
include/linux/sched.h \
$(wildcard include/config/sched/debug.h) \
$(wildcard include/config/detect/softlockup.h) \
$(wildcard include/config/core/dump/default/elf/headers.h) \
$(wildcard include/config/bsd/process/acct.h) \
$(wildcard include/config/taskstats.h) \
$(wildcard include/config/audit.h) \
$(wildcard include/config/inotify/user.h) \
$(wildcard include/config/posix/mqueue.h) \
$(wildcard include/config/keys.h) \
$(wildcard include/config/user/sched.h) \
$(wildcard include/config/schedstats.h) \
$(wildcard include/config/task/delay/acct.h) \
$(wildcard include/config/fair/group/sched.h) \
$(wildcard include/config/rt/group/sched.h) \
$(wildcard include/config/blk/dev/io/trace.h) \
$(wildcard include/config/cc/stackprotector.h) \
$(wildcard include/config/x86/ptrace/bts.h) \
$(wildcard include/config/sysvipc.h) \
$(wildcard include/config/rt/mutexes.h) \
$(wildcard include/config/task/xacct.h) \
$(wildcard include/config/cpusets.h) \
$(wildcard include/config/cgroups.h) \
$(wildcard include/config/futex.h) \
$(wildcard include/config/fault/injection.h) \
$(wildcard include/config/latencytop.h) \
$(wildcard include/config/function/graph/tracer.h) \
$(wildcard include/config/tracing.h) \
$(wildcard include/config/iowait/acct.h) \
$(wildcard include/config/have/unstable/sched/clock.h) \
$(wildcard include/config/preempt/bkl.h) \
$(wildcard include/config/group/sched.h) \
include/linux/timex.h \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/timex.h \
arch/arm/mach-msm/include/mach/timex.h \
include/linux/jiffies.h \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/cputime.h \
include/asm-generic/cputime.h \
include/linux/sem.h \
include/linux/ipc.h \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/ipcbuf.h \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/sembuf.h \
include/linux/signal.h \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/signal.h \
include/asm-generic/signal.h \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/sigcontext.h \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/siginfo.h \
include/asm-generic/siginfo.h \
include/linux/fs_struct.h \
include/linux/proportions.h \
include/linux/percpu_counter.h \
include/linux/seccomp.h \
$(wildcard include/config/seccomp.h) \
include/linux/rtmutex.h \
$(wildcard include/config/debug/rt/mutexes.h) \
include/linux/plist.h \
$(wildcard include/config/debug/pi/list.h) \
include/linux/resource.h \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/resource.h \
include/asm-generic/resource.h \
include/linux/timer.h \
$(wildcard include/config/timer/stats.h) \
$(wildcard include/config/debug/objects/timers.h) \
include/linux/ktime.h \
$(wildcard include/config/ktime/scalar.h) \
include/linux/debugobjects.h \
$(wildcard include/config/debug/objects/free.h) \
include/linux/hrtimer.h \
$(wildcard include/config/high/res/timers.h) \
include/linux/task_io_accounting.h \
$(wildcard include/config/task/io/accounting.h) \
include/linux/latencytop.h \
include/linux/cred.h \
include/linux/key.h \
include/linux/sysctl.h \
include/linux/aio.h \
$(wildcard include/config/aio.h) \
include/linux/workqueue.h \
include/linux/aio_abi.h \
include/linux/uio.h \
include/linux/ftrace_irq.h \
$(wildcard include/config/dynamic/ftrace.h) \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/hardirq.h \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/irq.h \
arch/arm/mach-msm/include/mach/irqs.h \
include/linux/irq_cpustat.h \
include/linux/backing-dev.h \
$(wildcard include/config/debug/fs.h) \
include/linux/pagevec.h \
include/linux/fadvise.h \
include/linux/writeback.h \
include/linux/syscalls.h \
$(wildcard include/config/ppc64.h) \
$(wildcard include/config/alpha.h) \
/home/jacob/source/wildfire-kernel/arch/arm/include/asm/unistd.h \
$(wildcard include/config/oabi/compat.h) \
mm/fadvise.o: $(deps_mm/fadvise.o)
$(deps_mm/fadvise.o):
| HCDRJacob/wildfire-kernel | mm/.fadvise.o.cmd | bat | gpl-2.0 | 148,465 |
@REM ECHO off
SET OLD_DIR=%cd%
SET PSSCRIPT=install.ps1
SET PSCMD=%~dp0%PSSCRIPT%
ECHO Esecuzione dello script PowerShell %PSCMD%
ECHO Per il profilo %USERPROFILE% (%USERDOMAIN%\%USERPROFILE%)
ECHO .
CD %~dp0
git submodule update --init --recursive
PowerShell -Command Start-Process "$PSHome\PowerShell.exe" -Verb RunAs -ArgumentList '-ExecutionPolicy bypass -File %PSCMD% %USERDOMAIN% %USERNAME% %USERPROFILE%'
CD %OLD_DIR%
SET PSCMD=
SET PSSCRIPT=
SET OLD_DIR=
| biotti/dotfiles | runme_win.cmd | bat | gpl-2.0 | 463 |
cmd_drivers/bluetooth/hci_uart.o := /opt/toolchains/arm-2009q3/bin/arm-none-eabi-ld -EL -r -o drivers/bluetooth/hci_uart.o drivers/bluetooth/hci_ldisc.o drivers/bluetooth/hci_h4.o
| dizgustipated/BOCA-2.6.35.14 | drivers/bluetooth/.hci_uart.o.cmd | bat | gpl-2.0 | 184 |
cmd_scripts/kconfig/lxdialog/checklist.o := gcc -Wp,-MD,scripts/kconfig/lxdialog/.checklist.o.d -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer -DCURSES_LOC="<ncurses.h>" -DLOCALE -c -o scripts/kconfig/lxdialog/checklist.o scripts/kconfig/lxdialog/checklist.c
source_scripts/kconfig/lxdialog/checklist.o := scripts/kconfig/lxdialog/checklist.c
deps_scripts/kconfig/lxdialog/checklist.o := \
/usr/include/stdc-predef.h \
scripts/kconfig/lxdialog/dialog.h \
/usr/include/x86_64-linux-gnu/sys/types.h \
/usr/include/features.h \
/usr/include/x86_64-linux-gnu/sys/cdefs.h \
/usr/include/x86_64-linux-gnu/bits/wordsize.h \
/usr/include/x86_64-linux-gnu/gnu/stubs.h \
/usr/include/x86_64-linux-gnu/gnu/stubs-64.h \
/usr/include/x86_64-linux-gnu/bits/types.h \
/usr/include/x86_64-linux-gnu/bits/typesizes.h \
/usr/include/time.h \
/usr/lib/gcc/x86_64-linux-gnu/4.9/include/stddef.h \
/usr/include/endian.h \
/usr/include/x86_64-linux-gnu/bits/endian.h \
/usr/include/x86_64-linux-gnu/bits/byteswap.h \
/usr/include/x86_64-linux-gnu/bits/byteswap-16.h \
/usr/include/x86_64-linux-gnu/sys/select.h \
/usr/include/x86_64-linux-gnu/bits/select.h \
/usr/include/x86_64-linux-gnu/bits/sigset.h \
/usr/include/x86_64-linux-gnu/bits/time.h \
/usr/include/x86_64-linux-gnu/bits/select2.h \
/usr/include/x86_64-linux-gnu/sys/sysmacros.h \
/usr/include/x86_64-linux-gnu/bits/pthreadtypes.h \
/usr/include/fcntl.h \
/usr/include/x86_64-linux-gnu/bits/fcntl.h \
/usr/include/x86_64-linux-gnu/bits/fcntl-linux.h \
/usr/include/x86_64-linux-gnu/bits/stat.h \
/usr/include/x86_64-linux-gnu/bits/fcntl2.h \
/usr/include/unistd.h \
/usr/include/x86_64-linux-gnu/bits/posix_opt.h \
/usr/include/x86_64-linux-gnu/bits/environments.h \
/usr/include/x86_64-linux-gnu/bits/confname.h \
/usr/include/getopt.h \
/usr/include/x86_64-linux-gnu/bits/unistd.h \
/usr/include/ctype.h \
/usr/include/xlocale.h \
/usr/include/stdlib.h \
/usr/include/x86_64-linux-gnu/bits/waitflags.h \
/usr/include/x86_64-linux-gnu/bits/waitstatus.h \
/usr/include/alloca.h \
/usr/include/x86_64-linux-gnu/bits/stdlib-bsearch.h \
/usr/include/x86_64-linux-gnu/bits/stdlib-float.h \
/usr/include/x86_64-linux-gnu/bits/stdlib.h \
/usr/include/string.h \
/usr/include/x86_64-linux-gnu/bits/string.h \
/usr/include/x86_64-linux-gnu/bits/string2.h \
/usr/include/x86_64-linux-gnu/bits/string3.h \
/usr/lib/gcc/x86_64-linux-gnu/4.9/include/stdbool.h \
/usr/include/libintl.h \
/usr/include/locale.h \
/usr/include/x86_64-linux-gnu/bits/locale.h \
/usr/include/curses.h \
/usr/include/ncurses_dll.h \
/usr/lib/gcc/x86_64-linux-gnu/4.9/include/stdint.h \
/usr/include/stdint.h \
/usr/include/x86_64-linux-gnu/bits/wchar.h \
/usr/include/stdio.h \
/usr/include/libio.h \
/usr/include/_G_config.h \
/usr/include/wchar.h \
/usr/lib/gcc/x86_64-linux-gnu/4.9/include/stdarg.h \
/usr/include/x86_64-linux-gnu/bits/stdio_lim.h \
/usr/include/x86_64-linux-gnu/bits/sys_errlist.h \
/usr/include/x86_64-linux-gnu/bits/stdio.h \
/usr/include/x86_64-linux-gnu/bits/stdio2.h \
/usr/include/unctrl.h \
/usr/include/curses.h \
scripts/kconfig/lxdialog/checklist.o: $(deps_scripts/kconfig/lxdialog/checklist.o)
$(deps_scripts/kconfig/lxdialog/checklist.o):
| acheron1502/android_kernel_BLU_BLU_PURE_XL | scripts/kconfig/lxdialog/.checklist.o.cmd | bat | gpl-2.0 | 3,345 |
node.exe node_modules\http-server\bin\http-server | PabloPT/flowrpower | runHttpServer.cmd | bat | gpl-3.0 | 49 |
@echo off
REM
REM Copyright 2005-2011 Intel Corporation. All Rights Reserved.
REM
REM This file is part of Threading Building Blocks.
REM
REM Threading Building Blocks is free software; you can redistribute it
REM and/or modify it under the terms of the GNU General Public License
REM version 2 as published by the Free Software Foundation.
REM
REM Threading Building Blocks is distributed in the hope that it will be
REM useful, but WITHOUT ANY WARRANTY; without even the implied warranty
REM of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
REM GNU General Public License for more details.
REM
REM You should have received a copy of the GNU General Public License
REM along with Threading Building Blocks; if not, write to the Free Software
REM Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
REM
REM As a special exception, you may use this file as part of a free software
REM library without restriction. Specifically, if other files instantiate
REM templates or use macros or inline functions from this file, or you compile
REM this file and link it with other files to produce an executable, this
REM file does not by itself cause the resulting executable to be covered by
REM the GNU General Public License. This exception does not however
REM invalidate any other reasons why the executable file might be covered by
REM the GNU General Public License.
REM
REM no LD_PRELOAD under Windows
if "%1"=="-l" (
echo skip
exit
)
%*
| jonarbo/GREASY | src/3rdparty/tbb40_20111130oss/build/test_launcher.bat | bat | gpl-3.0 | 1,488 |
cd class
java -cp ../lib/*;. BM.BudgetManagement
cd ..
| The-BFG/BudgetManagement | run.bat | bat | gpl-3.0 | 55 |
@echo off
net stop Tomcat6
if [%1] equ [restart] (
echo Running restart script for web stack..
echo.
net stop Apache2.2
net stop MySQL
net start Apache2.2
net start MySQL
goto exit
)
if [%1] equ [start] (
echo Running start script for web stack..
echo.
net start Apache2.2
net start MySQL
goto exit
)
if [%1] equ [] (
echo Running start script for web stack..
echo.
net start Apache2.2
net start MySQL
goto exit
)
if [%1] equ [stop] (
echo Running stop script for web stack..
echo.
net stop Apache2.2
net stop MySQL
)
:exit
@echo on
| atiq-cs/Scripts-And-Utilities | cmd/samp.cmd | bat | gpl-3.0 | 560 |
@REM This bat file has been generated by the IAR Embeddded Workbench
@REM C-SPY interactive debugger,as an aid to preparing a command
@REM line for running the cspybat command line utility with the
@REM appropriate settings.
@REM
@REM After making some adjustments to this file, you can launch cspybat
@REM by typing the name of this file followed by the name of the debug
@REM file (usually an ubrof file). Note that this file is generated
@REM every time a new debug session is initialized, so you may want to
@REM move or rename the file before making changes.
@REM
@REM Note: some command line arguments cannot be properly generated
@REM by this process. Specifically, the plugin which is responsible
@REM for the Terminal I/O window (and other C runtime functionality)
@REM comes in a special version for cspybat, and the name of that
@REM plugin dll is not known when generating this file. It resides in
@REM the $TOOLKIT_DIR$\bin folder and is usually called XXXbat.dll or
@REM XXXlibsupportbat.dll, where XXX is the name of the corresponding
@REM tool chain. Replace the '<libsupport_plugin>' parameter
@REM below with the appropriate file name. Other plugins loaded by
@REM C-SPY are usually not needed by, or will not work in, cspybat
@REM but they are listed at the end of this file for reference.
"C:\Program Files\IAR Systems\Embedded Workbench 5.4\common\bin\cspybat" "C:\Program Files\IAR Systems\Embedded Workbench 5.4\arm\bin\armproc.dll" "C:\Program Files\IAR Systems\Embedded Workbench 5.4\arm\bin\armsim.dll" %1 --plugin "C:\Program Files\IAR Systems\Embedded Workbench 5.4\arm\bin\<libsupport_plugin>" --backend -B "--endian=little" "--cpu=ARM7TDMI" "--fpu=None" "--semihosting" "--device=Default" "-d" "sim"
@REM Loaded plugins:
@REM C:\Program Files\IAR Systems\Embedded Workbench 5.4\arm\bin\armlibsupport.dll
@REM C:\Program Files\IAR Systems\Embedded Workbench 5.4\common\plugins\CodeCoverage\CodeCoverage.dll
@REM C:\Program Files\IAR Systems\Embedded Workbench 5.4\common\plugins\Profiling\Profiling.dll
@REM C:\Program Files\IAR Systems\Embedded Workbench 5.4\common\plugins\stack\stack.dll
@REM C:\Program Files\IAR Systems\Embedded Workbench 5.4\common\plugins\SymList\SymList.dll
| YY-Edwards/LTE-STM32-USART_IO | EWARMv5/settings/Project.cspy.bat | bat | gpl-3.0 | 2,233 |
echo on
mkdir "C:\Temp\DbBackup\%1\"
bcp "SELECT * FROM RbrDb_%1.dbo.Route ORDER BY route_id" queryout "C:\Temp\DbBackup\%1\Route.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.ResellAcct ORDER BY resell_acct_id" queryout "C:\Temp\DbBackup\%1\ResellAcct.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.InventoryHistory ORDER BY service_id,batch_id,timestamp" queryout "C:\Temp\DbBackup\%1\InventoryHistory.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.InventoryUsage ORDER BY service_id,customer_acct_id,timestamp" queryout "C:\Temp\DbBackup\%1\InventoryUsage.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.CarrierAcctEPMap ORDER BY carrier_acct_EP_map_id" queryout "C:\Temp\DbBackup\%1\CarrierAcctEPMap.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.IPAddress ORDER BY IP_address" queryout "C:\Temp\DbBackup\%1\IPAddress.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.CarrierAcct ORDER BY carrier_acct_id" queryout "C:\Temp\DbBackup\%1\CarrierAcct.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.EndPoint ORDER BY end_point_id" queryout "C:\Temp\DbBackup\%1\EndPoint.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.DialPeer ORDER BY end_point_id, prefix_in, customer_acct_id" queryout "C:\Temp\DbBackup\%1\DialPeer.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.PrefixInType ORDER BY prefix_in_type_id" queryout "C:\Temp\DbBackup\%1\PrefixInType.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.CustomerAcct ORDER BY customer_acct_id" queryout "C:\Temp\DbBackup\%1\CustomerAcct.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.Node ORDER BY node_id" queryout "C:\Temp\DbBackup\%1\Node.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.LoadBalancingMap ORDER BY node_id, customer_acct_id" queryout "C:\Temp\DbBackup\%1\LoadBalancingMap.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.Partner ORDER BY partner_id" queryout "C:\Temp\DbBackup\%1\Partner.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.Platform ORDER BY platform_id" queryout "C:\Temp\DbBackup\%1\Platform.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.Service ORDER BY service_id" queryout "C:\Temp\DbBackup\%1\Service.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.TypeOfDayChoice ORDER BY type_of_day_choice" queryout "C:\Temp\DbBackup\%1\TypeOfDayChoice.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.TimeOfDayPolicy ORDER BY time_of_day_policy" queryout "C:\Temp\DbBackup\%1\TimeOfDayPolicy.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.PayphoneSurcharge ORDER BY payphone_surcharge_id" queryout "C:\Temp\DbBackup\%1\PayphoneSurcharge.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.Country ORDER BY country_id" queryout "C:\Temp\DbBackup\%1\Country.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.RetailRoute ORDER BY retail_route_id" queryout "C:\Temp\DbBackup\%1\RetailRoute.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.WholesaleRoute ORDER BY wholesale_route_id" queryout "C:\Temp\DbBackup\%1\WholesaleRoute.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.TimeOfDay ORDER BY time_of_day" queryout "C:\Temp\DbBackup\%1\TimeOfDay.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.TypeOfDay ORDER BY rate_info_id, type_of_day_choice" queryout "C:\Temp\DbBackup\%1\TypeOfDay.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.CustomerSupportGroup ORDER BY group_id" queryout "C:\Temp\DbBackup\%1\CustomerSupportGroup.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.Schedule ORDER BY schedule_id" queryout "C:\Temp\DbBackup\%1\Schedule.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.RoutingPlanDetail ORDER BY routing_plan_id, route_id" queryout "C:\Temp\DbBackup\%1\RoutingPlanDetail.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.InventoryLot ORDER BY lot_id" queryout "C:\Temp\DbBackup\%1\InventoryLot.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.ContactInfo ORDER BY contact_info_id" queryout "C:\Temp\DbBackup\%1\ContactInfo.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.CustomerSupportVendor ORDER BY vendor_id" queryout "C:\Temp\DbBackup\%1\CustomerSupportVendor.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.BalanceAdjustmentReason ORDER BY balance_adjustment_reason_id" queryout "C:\Temp\DbBackup\%1\BalanceAdjustmentReason.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.Person ORDER BY person_id" queryout "C:\Temp\DbBackup\%1\Person.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.RoutingPlan ORDER BY routing_plan_id" queryout "C:\Temp\DbBackup\%1\RoutingPlan.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.CdrExportMap ORDER BY map_id" queryout "C:\Temp\DbBackup\%1\CdrExportMap.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.RateInfo ORDER BY rate_info_id" queryout "C:\Temp\DbBackup\%1\RateInfo.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.CarrierRoute ORDER BY carrier_route_id" queryout "C:\Temp\DbBackup\%1\CarrierRoute.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.CallingPlan ORDER BY calling_plan_id" queryout "C:\Temp\DbBackup\%1\CallingPlan.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.VirtualSwitch ORDER BY virtual_switch_id" queryout "C:\Temp\DbBackup\%1\VirtualSwitch.txt" -c -S(local)\TRBR -T
REM ------ BIG TABLE --------------------
bcp "SELECT * FROM RbrDb_%1.dbo.RetailAccount ORDER BY retail_acct_id" queryout "C:\Temp\DbBackup\%1\RetailAccount.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.Box ORDER BY box_id" queryout "C:\Temp\DbBackup\%1\Box.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.GenerationRequest ORDER BY request_id" queryout "C:\Temp\DbBackup\%1\GenerationRequest.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.WholesaleRateHistory ORDER BY wholesale_route_id, date_on" queryout "C:\Temp\DbBackup\%1\WholesaleRateHistory.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.TimeOfDayPeriod ORDER BY rate_info_id, type_of_day_choice, start_hour" queryout "C:\Temp\DbBackup\%1\TimeOfDayPeriod.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.TerminationChoice ORDER BY termination_choice_id" queryout "C:\Temp\DbBackup\%1\TerminationChoice.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.TableSequence ORDER BY TableName" queryout "C:\Temp\DbBackup\%1\TableSequence.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.RetailRouteBonusMinutes ORDER BY retail_acct_id, retail_route_id" queryout "C:\Temp\DbBackup\%1\RetailRouteBonusMinutes.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.RetailRateHistory ORDER BY retail_route_id, date_on" queryout "C:\Temp\DbBackup\%1\RetailRateHistory.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.RetailAccountPayment ORDER BY retail_acct_id,date_time" queryout "C:\Temp\DbBackup\%1\RetailAccountPayment.txt" -c -S(local)\TRBR -T
REM ------ BIG TABLES --------------------
bcp "SELECT * FROM RbrDb_%1.dbo.ResidentialVoIP ORDER BY user_id" queryout "C:\Temp\DbBackup\%1\ResidentialVoIP.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.ResidentialPSTN ORDER BY service_id, ANI" queryout "C:\Temp\DbBackup\%1\ResidentialPSTN.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.ResellRateHistory ORDER BY resell_acct_id,wholesale_route_id,date_on" queryout "C:\Temp\DbBackup\%1\ResellRateHistory.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.Rate ORDER BY rate_info_id, type_of_day_choice, time_of_day" queryout "C:\Temp\DbBackup\%1\Rate.txt" -c -S(local)\TRBR -T
REM ------ BIG TABLE --------------------
bcp "SELECT * FROM RbrDb_%1.dbo.PhoneCard ORDER BY service_id, pin" queryout "C:\Temp\DbBackup\%1\PhoneCard.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.OutboundANI ORDER BY outbound_ani_id" queryout "C:\Temp\DbBackup\%1\OutboundANI.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.LCRBlackList ORDER BY routing_plan_id, route_id, carrier_acct_id" queryout "C:\Temp\DbBackup\%1\LCRBlackList.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.HolidayCalendar ORDER BY rate_info_id, holiday_day" queryout "C:\Temp\DbBackup\%1\HolidayCalendar.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.DialCode ORDER BY calling_plan_id, dial_code" queryout "C:\Temp\DbBackup\%1\DialCode.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.CustomerAcctSupportMap ORDER BY customer_acct_id, vendor_id" queryout "C:\Temp\DbBackup\%1\CustomerAcctSupportMap.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.CustomerAcctPayment ORDER BY customer_acct_id, date_time" queryout "C:\Temp\DbBackup\%1\CustomerAcctPayment.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.CdrExportMapDetail ORDER BY map_detail_id" queryout "C:\Temp\DbBackup\%1\CdrExportMapDetail.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.CarrierRateHistory ORDER BY carrier_route_id, date_on" queryout "C:\Temp\DbBackup\%1\CarrierRateHistory.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.CallCenterCabina ORDER BY service_id, serial_number" queryout "C:\Temp\DbBackup\%1\CallCenterCabina.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.Batch ORDER BY batch_id" queryout "C:\Temp\DbBackup\%1\Batch.txt" -c -S(local)\TRBR -T
bcp "SELECT * FROM RbrDb_%1.dbo.AccessNumberList ORDER BY access_number" queryout "C:\Temp\DbBackup\%1\AccessNumberList.txt" -c -S(local)\TRBR -T
cmd
| Srdjan/timok.rbr | Rbr/DAL/SQLTemplates/TRBR/ExportRbrDb.bat | bat | lgpl-2.1 | 9,798 |
@echo off
rem -------------------------------------------------------
rem - testtH_ðóÉ·é
rem - øÅwè³ê½R}hð»ê¼êÀs·é
rem -------------------------------------------------------
set BATCHDIR=%~dp0
set RESULTDIR=%BATCHDIR%test
echo Clean up folder...
if exist "%RESULTDIR%" (
rmdir /S /Q "%RESULTDIR%"
)
mkdir "%RESULTDIR%"
for %%a in (%*) do (
echo EXEC: %%~na
rem "%%a"
timeout 3 /nobreak
)
pause
| bugoodby/bugoodbylib | script/batch/args_exec.bat | bat | unlicense | 462 |
@if "%SCM_TRACE_LEVEL%" NEQ "4" @echo off
:: ----------------------
:: KUDU Deployment Script
:: Version: 0.1.10
:: ----------------------
:: Prerequisites
:: -------------
:: Verify node.js installed
where node 2>nul >nul
IF %ERRORLEVEL% NEQ 0 (
echo Missing node.js executable, please install node.js, if already installed make sure it can be reached from current environment.
goto error
)
:: Setup
:: -----
setlocal enabledelayedexpansion
SET ARTIFACTS=%~dp0%..\artifacts
IF NOT DEFINED DEPLOYMENT_SOURCE (
SET DEPLOYMENT_SOURCE=%~dp0%.
)
IF NOT DEFINED DEPLOYMENT_TARGET (
SET DEPLOYMENT_TARGET=%ARTIFACTS%\wwwroot
)
IF NOT DEFINED NEXT_MANIFEST_PATH (
SET NEXT_MANIFEST_PATH=%ARTIFACTS%\manifest
IF NOT DEFINED PREVIOUS_MANIFEST_PATH (
SET PREVIOUS_MANIFEST_PATH=%ARTIFACTS%\manifest
)
)
IF NOT DEFINED KUDU_SYNC_CMD (
:: Install kudu sync
echo Installing Kudu Sync
call npm install kudusync -g --silent
IF !ERRORLEVEL! NEQ 0 goto error
:: Locally just running "kuduSync" would also work
SET KUDU_SYNC_CMD=%appdata%\npm\kuduSync.cmd
)
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:: Deployment
:: ----------
echo Handling Basic Web Site deployment.
:: 1. KuduSync
IF /I "%IN_PLACE_DEPLOYMENT%" NEQ "1" (
call :ExecuteCmd "%KUDU_SYNC_CMD%" -v 50 -f "%DEPLOYMENT_SOURCE%" -t "%DEPLOYMENT_TARGET%" -n "%NEXT_MANIFEST_PATH%" -p "%PREVIOUS_MANIFEST_PATH%" -i ".git;.hg;.deployment;deploy.cmd"
IF !ERRORLEVEL! NEQ 0 goto error
)
::::::::::::::::::::::::::::::::::::::::::::::::::::
:: Generate Static Site
:: --------------------
echo "Generate Static Site"
IF NOT EXIST RUBY_INSTALLED (
PATH="%path%";%RUBY_PATH%
call %RUBY_DEVKIT_PATH%\devkitvars.bat
:: This is a work around and needs to be addressed.
call gem install jekyll --source http://rubygems.org
IF !ERRORLEVEL! NEQ 0 goto error
SET RUBY_INSTALLED="true"
)
call jekyll build -s "%DEPLOYMENT_TARGET%" -d "%DEPLOYMENT_TARGET%\_site"
goto end
:: Execute command routine that will echo out when error
:ExecuteCmd
setlocal
set _CMD_=%*
call %_CMD_%
if "%ERRORLEVEL%" NEQ "0" echo Failed exitCode=%ERRORLEVEL%, command=%_CMD_%
exit /b %ERRORLEVEL%
:error
endlocal
echo An error has occurred during web site deployment.
call :exitSetErrorLevel
call :exitFromFunction 2>nul
:exitSetErrorLevel
exit /b 1
:exitFromFunction
()
:end
endlocal
echo Finished successfully.
| stephbu/MicrosoftAzureWebSitesCheatSheet | deploy.cmd | bat | apache-2.0 | 2,585 |
@echo off
play debug test-only views.admin.FluentAsyncTest | stefanil/play2-prototypen | treasehunt/testRunner.bat | bat | apache-2.0 | 59 |
@echo off
setlocal
set regpath=HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\HTTP\Parameters
reg query "%regpath%" /v "AllowRestrictedChars"
if errorlevel 1 (
reg add %regpath% /v AllowRestrictedChars /t REG_DWORD /d 00000001
reg add %regpath% /v UrlSegmentMaxCount /t REG_DWORD /d 00000000
reg add %regpath% /v PercentUAllowed /t REG_DWORD /d 00000001
reg add %regpath% /v UrlSegmentMaxLength /t REG_DWORD /d 00000000
shutdown /r /t 0
)
| AzureAD/availability-proxy-for-rest-services | Proxy/ExtendMaxSegment.cmd | bat | apache-2.0 | 460 |
@setlocal EnableDelayedExpansion EnableExtensions
@for %%i in (a:\_packer_config*.cmd) do @call "%%~i"
@if defined PACKER_DEBUG (@echo on) else (@echo off)
if not defined CM echo ==^> ERROR: The "CM" variable was not found in the environment & goto exit1
if "%CM%" == "nocm" goto nocm
if not defined CM_VERSION echo ==^> ERROR: The "CM_VERSION" variable was not found in the environment & set CM_VERSION=latest
if "%CM%" == "chef" goto chef
if "%CM%" == "chefdk" goto chefdk
if "%CM%" == "puppet" goto puppet
if "%CM%" == "salt" goto salt
echo ==^> ERROR: Unknown value for environment variable CM: "%CM%"
goto exit1
::::::::::::
:chef
::::::::::::
if not defined CHEF_URL if "%CM_VERSION%" == "latest" set CM_VERSION=12.9.38-1
if not defined CHEF_URL set CHEF_64_URL=https://packages.chef.io/stable/windows/2008r2/chef-client-%CM_VERSION%-x64.msi
if not defined CHEF_URL set CHEF_32_URL=https://packages.chef.io/stable/windows/2008r2/chef-client-%CM_VERSION%-x86.msi
if defined ProgramFiles(x86) (
SET CHEF_URL=%CHEF_64_URL%
) else (
SET CHEF_URL=%CHEF_32_URL%
)
for %%i in ("%CHEF_URL%") do set CHEF_MSI=%%~nxi
set CHEF_DIR=%TEMP%\chef
set CHEF_PATH=%CHEF_DIR%\%CHEF_MSI%
echo ==^> Creating "%CHEF_DIR%"
mkdir "%CHEF_DIR%"
pushd "%CHEF_DIR%"
if exist "%SystemRoot%\_download.cmd" (
call "%SystemRoot%\_download.cmd" "%CHEF_URL%" "%CHEF_PATH%"
) else (
echo ==^> Downloading %CHEF_URL% to %CHEF_PATH%
powershell -Command "(New-Object System.Net.WebClient).DownloadFile(\"%CHEF_URL%\", '%CHEF_PATH%')" <NUL
)
if not exist "%CHEF_PATH%" goto exit1
echo ==^> Installing Chef client %CM_VERSION%
msiexec /qb /i "%CHEF_PATH%" /l*v "%CHEF_DIR%\chef.log" %CHEF_OPTIONS%
@if errorlevel 1 echo ==^> WARNING: Error %ERRORLEVEL% was returned by: msiexec /qb /i "%CHEF_PATH%" /l*v "%CHEF_DIR%\chef.log" %CHEF_OPTIONS%
ver>nul
goto exit0
::::::::::::
:chefdk
::::::::::::
if not defined CHEFDK_URL if "%CM_VERSION%" == "latest" set CM_VERSION=0.13.21-1
if not defined CHEFDK_URL set CHEFDK_64_URL=https://packages.chef.io/stable/windows/2008r2/chefdk-%CM_VERSION%-x86.msi
if not defined CHEFDK_URL set CHEFDK_32_URL=https://packages.chef.io/stable/windows/2008r2/chefdk-%CM_VERSION%-x86.msi
if defined ProgramFiles(x86) (
SET CHEFDK_URL=%CHEFDK_64_URL%
) else (
SET CHEFDK_URL=%CHEFDK_32_URL%
)
for %%i in ("%CHEFDK_URL%") do set CHEFDK_MSI=%%~nxi
set CHEFDK_DIR=%TEMP%\chefdk
set CHEFDK_PATH=%CHEFDK_DIR%\%CHEFDK_MSI%
echo ==^> Creating "%CHEFDK_DIR%"
mkdir "%CHEFDK_DIR%"
pushd "%CHEFDK_DIR%"
echo ==^> Downloading Chef DK to %CHEFDK_PATH%
if exist "%SystemRoot%\_download.cmd" (
call "%SystemRoot%\_download.cmd" "%CHEFDK_URL%" "%CHEFDK_PATH%"
) else (
echo ==^> Downloading %CHEFDK_URL% to %CHEFDK_PATH%
powershell -Command "(New-Object System.Net.WebClient).DownloadFile(\"%CHEFDK_URL%\", '%CHEFDK_PATH%')" <NUL
)
if not exist "%CHEFDK_PATH%" goto exit1
echo ==^> Installing Chef Development Kit %CM_VERSION%
msiexec /qb /i "%CHEFDK_PATH%" /l*v "%CHEFDK_DIR%\chef.log" %CHEFDK_OPTIONS%
@if errorlevel 1 echo ==^> WARNING: Error %ERRORLEVEL% was returned by: msiexec /qb /i "%CHEFDK_PATH%" /l*v "%CHEFDK_DIR%\chef.log" %CHEFDK_OPTIONS%
ver>nul
goto exit0
::::::::::::
:puppet
::::::::::::
:: if "%CM_VERSION%" == "latest" set CM_VERSION=3.8.7
if not defined PUPPET_64_URL set PUPPET_URL=https://downloads.puppetlabs.com/windows/puppet-x64-%CM_VERSION%.msi
if not defined PUPPET_32_URL set PUPPET_URL=https://downloads.puppetlabs.com/windows/puppet-%CM_VERSION%.msi
if defined ProgramFiles(x86) (
set PUPPET_URL=%PUPPET_64_URL%
) else (
set PUPPET_URL=%PUPPET_32_URL%
)
for %%i in ("%PUPPET_URL%") do set PUPPET_MSI=%%~nxi
set PUPPET_DIR=%TEMP%\puppet
set PUPPET_PATH=%PUPPET_DIR%\%PUPPET_MSI%
echo ==^> Creating "%PUPPET_DIR%"
mkdir "%PUPPET_DIR%"
pushd "%PUPPET_DIR%"
:: todo support CM_VERSION variable
if exist "%SystemRoot%\_download.cmd" (
call "%SystemRoot%\_download.cmd" "%PUPPET_URL%" "%PUPPET_PATH%"
) else (
echo ==^> Downloading %PUPPET_URL% to %PUPPET_PATH%
powershell -Command "(New-Object System.Net.WebClient).DownloadFile('%PUPPET_URL%', '%PUPPET_PATH%')" <NUL
)
if not exist "%PUPPET_PATH%" goto exit1
echo ==^> Installing Puppet client %CM_VERSION%
:: see http://docs.puppetlabs.com/pe/latest/install_windows.html
msiexec /qb /i "%PUPPET_PATH%" /l*v "%PUPPET_DIR%\puppet.log" %PUPPET_OPTIONS%
@if errorlevel 1 echo ==^> WARNING: Error %ERRORLEVEL% was returned by: msiexec /qb /i "%PUPPET_PATH%" /l*v "%PUPPET_DIR%\puppet.log" %PUPPET_OPTIONS%
ver>nul
goto exit0
::::::::::::
:salt
::::::::::::
if "%CM_VERSION%" == "latest" set CM_VERSION=2015.8.8-2
if not defined SALT_64_URL set SALT_64_URL=https://repo.saltstack.com/windows/Salt-Minion-%CM_VERSION%-AMD64-Setup.exe
if not defined SALT_32_URL set SALT_32_URL=https://repo.saltstack.com/windows/Salt-Minion-%CM_VERSION%-x86-Setup.exe
if defined ProgramFiles(x86) (
set SALT_URL=%SALT_64_URL%
) else (
set SALT_URL=%SALT_32_URL%
)
for %%i in ("%SALT_URL%") do set SALT_EXE=%%~nxi
set SALT_DIR=%TEMP%\salt
set SALT_PATH=%SALT_DIR%\%SALT_EXE%
echo ==^> Creating "%SALT_DIR%"
mkdir "%SALT_DIR%"
pushd "%SALT_DIR%"
if exist "%SystemRoot%\_download.cmd" (
call "%SystemRoot%\_download.cmd" "%SALT_URL%" "%SALT_PATH%"
) else (
echo ==^> Downloading %SALT_URL% to %SALT_PATH%
powershell -Command "(New-Object System.Net.WebClient).DownloadFile('%SALT_URL%', '%SALT_PATH%')" <NUL
)
if not exist "%SALT_PATH%" goto exit1
echo ==^> Installing Salt minion
:: see http://docs.saltstack.com/en/latest/topics/installation/windows.html
"%SALT_PATH%" /S %SALT_OPTIONS%
@if errorlevel 1 echo ==^> WARNING: Error %ERRORLEVEL% was returned by: "%SALT_PATH%" /S %SALT_OPTIONS%
ver>nul
goto exit0
::::::::::::
:nocm
::::::::::::
echo ==^> Building box without a configuration management tool
:exit0
@ping 127.0.0.1
@ver>nul
@goto :exit
:exit1
@ping 127.0.0.1
@verify other 2>nul
:exit
@echo ==^> Script exiting with errorlevel %ERRORLEVEL%
@exit /b %ERRORLEVEL%
| TaylorMonacelli/boxcutter-windows | script/cmtool.bat | bat | apache-2.0 | 6,005 |
@echo off
:: Batch arguments:
:: %~1: Project/Solution to build
:: %~2: Target(Normally should be Debug or Release)
:: %~3: Platform(Normally should be "Any CPU" for sln and AnyCPU for a csproj)
:: if none are passed, defaults to building Sharpmake.sln in Debug|AnyCPU
setlocal enabledelayedexpansion
set VSWHERE="%ProgramFiles(x86)%\Microsoft Visual Studio\Installer\vswhere.exe"
if not exist %VSWHERE% (
echo ERROR: Cannot determine the location of the vswhere command Common Tools folder.
goto error
)
set VSMSBUILDCMD=
for /f "usebackq delims=" %%i in (`%VSWHERE% -latest -products * -property installationPath`) do (
if exist "%%i\Common7\Tools\VsMSBuildCmd.bat" (
set VSMSBUILDCMD="%%i\Common7\Tools\VsMSBuildCmd.bat"
)
)
if not defined VSMSBUILDCMD (
echo ERROR: Cannot determine the location of Common Tools folder.
goto error
)
echo MSBuild batch path: !VSMSBUILDCMD!
call !VSMSBUILDCMD!
if %errorlevel% NEQ 0 goto error
if "%~1" == "" (
call :BuildSharpmake "%~dp0Sharpmake.sln" "Debug" "Any CPU"
) else (
call :BuildSharpmake %1 %2 %3
)
if %errorlevel% NEQ 0 goto error
goto success
@REM -----------------------------------------------------------------------
:: Build Sharpmake using specified arguments
:BuildSharpmake
echo Compiling %~1 in "%~2|%~3"...
set MSBUILD_CMD=msbuild -clp:Summary -t:rebuild -restore "%~1" /nologo /verbosity:m /p:Configuration="%~2" /p:Platform="%~3" /maxcpucount /p:CL_MPCount=%NUMBER_OF_PROCESSORS%
echo %MSBUILD_CMD%
%MSBUILD_CMD%
set ERROR_CODE=%errorlevel%
if %ERROR_CODE% NEQ 0 (
echo ERROR: Failed to compile %~1 in "%~2|%~3".
goto end
)
goto success
@REM -----------------------------------------------------------------------
:success
set ERROR_CODE=0
goto end
@REM -----------------------------------------------------------------------
:error
set ERROR_CODE=1
goto end
@REM -----------------------------------------------------------------------
:end
exit /b %ERROR_CODE%
| ubisoftinc/Sharpmake | CompileSharpmake.bat | bat | apache-2.0 | 1,977 |
@echo off
"%~dp0build\lua.exe" "%~dp0src\check.lua" %1 "%~dp0\"
pause | syj2010syj/5211MapCheck | check.bat | bat | apache-2.0 | 69 |
#call git clone git://git.jetbrains.org/idea/android.git android
call git clone git://git.jetbrains.org/idea/adt-tools-base.git tools-base
| consulo/consulo-android | getPlugins.bat | bat | apache-2.0 | 139 |
@echo off
setLocal EnableDelayedExpansion
set _G_ROOT_DIR=%~dp0
set _G_CLASSPATH=%_G_ROOT_DIR%..\src;%_G_ROOT_DIR%..\lib\*;%JAVA_HOME%\lib\tools.jar
set _CMD_LINE_ARGS=
set _DEBUG=
if ""%1""==""debug"" set _DEBUG=-Xdebug -Xrunjdwp:transport=dt_shmem,address=gosudoc,server=y,suspend=y
if ""%1""==""debug"" shift
REM Slurp the command line arguments. This loop allows for an unlimited number
REM of arguments (up to the command line limit, anyway).
if ""%1""=="""" goto doneStart
:setupArgs
if ""%1""=="""" goto doneStart
set _CMD_LINE_ARGS=%_CMD_LINE_ARGS% %1
shift
goto setupArgs
REM This label provides a place for the argument list loop to break out
REM and for NT handling to skip to.
:doneStart
:checkJava
set _JAVACMD=%JAVACMD%
if "%JAVA_HOME%" == "" goto noJavaHome
if not exist "%JAVA_HOME%\bin\java.exe" goto noJavaHome
if "%_JAVACMD%" == "" set _JAVACMD=%JAVA_HOME%\bin\java.exe
:noJavaHome
if "%_JAVACMD%" == "" set _JAVACMD=java.exe
:runGosudoc
"%_JAVACMD%" %_DEBUG% %GOSU_OPTS% -classpath "%_G_CLASSPATH%" gw.gosudoc.cli.Gosudoc %_CMD_LINE_ARGS%
goto end
:end
rem Check the error code of the execution
set GOSU_ERROR=%ERRORLEVEL%
set _JAVACMD=
set _CMD_LINE_ARGS=
set _DEBUG=
set _G_CLASSPATH=
set _G_ROOT_DIR=
| gosu-lang/gosu-lang | gosu/src/main/scripts/gosudoc.cmd | bat | apache-2.0 | 1,246 |
@echo off
echo Compile asmsx with Visual C++ 98 (6.0)
set VCDIR=C:\Program Files\Microsoft Visual Studio
set INCLUDE=%VCDIR%\VC98\INCLUDE
set LIB=%VCDIR%\VC98\LIB
set PATH=%VCDIR%\Common\msdev98\bin;%VCDIR%\VC98\bin;%PATH%
flex -i -Pparser1 -olex.parser1.c parser1.l
flex -i -Pparser2 -olex.parser2.c parser2.l
flex -i -Pparser3 -olex.parser3.c parser3.l
bison -d -v z80gen.y -oz80gen.tab.c
flex -i -olex.scan.c scan.l
cl.exe /nologo /TC /G6 /W4 /Os asmsx.c warnmsg.c wav.c z80gen.tab.c lex.scan.c lex.parser1.c lex.parser2.c lex.parser3.c > asmsx.vc6.err
rem /W1 to /W4 for warnings, /WX to treat warning as errors, /O2 for moderate optimization
del *.tab.c *.tab.h lex.*.c *.obj *.i *.output *.map
| oboroc/misc | cleanup/src/build-vc6.cmd | bat | apache-2.0 | 705 |
REM Copyright (2016) Michael Baer, Daniel Bonrath, All rights reserved.
REM
REM Licensed under the Apache License, Version 2.0 (the "License");
REM you may not use this file except in compliance with the License.
REM You may obtain a copy of the License at
REM
REM http://www.apache.org/licenses/LICENSE-2.0
REM
REM Unless required by applicable law or agreed to in writing, software
REM distributed under the License is distributed on an "AS IS" BASIS,
REM WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
REM See the License for the specific language governing permissions and
REM limitations under the License.
call build-common.bat %1 %2
call build-boost.bat %1 %2
call build-clockUtils.bat %1 %2
call build-gflags.bat %1 %2
call build-glog.bat %1 %2
call build-gmock.bat %1 %2
| ClockworkOrigins/m2etis | dependencies/build-dependencies.bat | bat | apache-2.0 | 808 |
-do run -all; exit -c a few vsim_options -gvlogparam_bool=1 -gvlogparam_int=42 -gvlogparam_str=hello +plusarg_bool=1 +plusarg_int=42 +plusarg_str=hello top_module
| lowRISC/edalize | tests/test_modelsim/vsim2.cmd | bat | bsd-2-clause | 163 |
@echo off
IF EXIST "gradle_localOverride.cmd" call "gradle_localOverride.cmd"
del /F /Q _lib\*
call gradlew copyToLib --info
pause | JFXtras/jfxtras-labs-samples | gradlew_lib.cmd | bat | bsd-3-clause | 130 |
jstestdriver --config Daisy202Loader.conf --tests all --captureConsole --testOutput %~dp0\results
| nlbdev/nlbdirekte | player/tests/Daisy202Loader.bat | bat | bsd-3-clause | 99 |
@ECHO OFF
REM Command file for Sphinx documentation
if "%SPHINXBUILD%" == "" (
set SPHINXBUILD=sphinx-build
)
set BUILDDIR=_build
set ALLSPHINXOPTS=-d %BUILDDIR%/doctrees %SPHINXOPTS% .
set I18NSPHINXOPTS=%SPHINXOPTS% .
if NOT "%PAPER%" == "" (
set ALLSPHINXOPTS=-D latex_paper_size=%PAPER% %ALLSPHINXOPTS%
set I18NSPHINXOPTS=-D latex_paper_size=%PAPER% %I18NSPHINXOPTS%
)
if "%1" == "" goto help
if "%1" == "help" (
:help
echo.Please use `make ^<target^>` where ^<target^> is one of
echo. html to make standalone HTML files
echo. dirhtml to make HTML files named index.html in directories
echo. singlehtml to make a single large HTML file
echo. pickle to make pickle files
echo. json to make JSON files
echo. htmlhelp to make HTML files and a HTML help project
echo. qthelp to make HTML files and a qthelp project
echo. devhelp to make HTML files and a Devhelp project
echo. epub to make an epub
echo. latex to make LaTeX files, you can set PAPER=a4 or PAPER=letter
echo. text to make text files
echo. man to make manual pages
echo. texinfo to make Texinfo files
echo. gettext to make PO message catalogs
echo. changes to make an overview over all changed/added/deprecated items
echo. xml to make Docutils-native XML files
echo. pseudoxml to make pseudoxml-XML files for display purposes
echo. linkcheck to check all external links for integrity
echo. doctest to run all doctests embedded in the documentation if enabled
goto end
)
if "%1" == "clean" (
for /d %%i in (%BUILDDIR%\*) do rmdir /q /s %%i
del /q /s %BUILDDIR%\*
goto end
)
%SPHINXBUILD% 2> nul
if errorlevel 9009 (
echo.
echo.The 'sphinx-build' command was not found. Make sure you have Sphinx
echo.installed, then set the SPHINXBUILD environment variable to point
echo.to the full path of the 'sphinx-build' executable. Alternatively you
echo.may add the Sphinx directory to PATH.
echo.
echo.If you don't have Sphinx installed, grab it from
echo.http://sphinx-doc.org/
exit /b 1
)
if "%1" == "html" (
%SPHINXBUILD% -b html %ALLSPHINXOPTS% %BUILDDIR%/html
if errorlevel 1 exit /b 1
echo.
echo.Build finished. The HTML pages are in %BUILDDIR%/html.
goto end
)
if "%1" == "dirhtml" (
%SPHINXBUILD% -b dirhtml %ALLSPHINXOPTS% %BUILDDIR%/dirhtml
if errorlevel 1 exit /b 1
echo.
echo.Build finished. The HTML pages are in %BUILDDIR%/dirhtml.
goto end
)
if "%1" == "singlehtml" (
%SPHINXBUILD% -b singlehtml %ALLSPHINXOPTS% %BUILDDIR%/singlehtml
if errorlevel 1 exit /b 1
echo.
echo.Build finished. The HTML pages are in %BUILDDIR%/singlehtml.
goto end
)
if "%1" == "pickle" (
%SPHINXBUILD% -b pickle %ALLSPHINXOPTS% %BUILDDIR%/pickle
if errorlevel 1 exit /b 1
echo.
echo.Build finished; now you can process the pickle files.
goto end
)
if "%1" == "json" (
%SPHINXBUILD% -b json %ALLSPHINXOPTS% %BUILDDIR%/json
if errorlevel 1 exit /b 1
echo.
echo.Build finished; now you can process the JSON files.
goto end
)
if "%1" == "htmlhelp" (
%SPHINXBUILD% -b htmlhelp %ALLSPHINXOPTS% %BUILDDIR%/htmlhelp
if errorlevel 1 exit /b 1
echo.
echo.Build finished; now you can run HTML Help Workshop with the ^
.hhp project file in %BUILDDIR%/htmlhelp.
goto end
)
if "%1" == "qthelp" (
%SPHINXBUILD% -b qthelp %ALLSPHINXOPTS% %BUILDDIR%/qthelp
if errorlevel 1 exit /b 1
echo.
echo.Build finished; now you can run "qcollectiongenerator" with the ^
.qhcp project file in %BUILDDIR%/qthelp, like this:
echo.^> qcollectiongenerator %BUILDDIR%\qthelp\pySunSpec.qhcp
echo.To view the help file:
echo.^> assistant -collectionFile %BUILDDIR%\qthelp\pySunSpec.ghc
goto end
)
if "%1" == "devhelp" (
%SPHINXBUILD% -b devhelp %ALLSPHINXOPTS% %BUILDDIR%/devhelp
if errorlevel 1 exit /b 1
echo.
echo.Build finished.
goto end
)
if "%1" == "epub" (
%SPHINXBUILD% -b epub %ALLSPHINXOPTS% %BUILDDIR%/epub
if errorlevel 1 exit /b 1
echo.
echo.Build finished. The epub file is in %BUILDDIR%/epub.
goto end
)
if "%1" == "latex" (
%SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex
if errorlevel 1 exit /b 1
echo.
echo.Build finished; the LaTeX files are in %BUILDDIR%/latex.
goto end
)
if "%1" == "latexpdf" (
%SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex
cd %BUILDDIR%/latex
make all-pdf
cd %BUILDDIR%/..
echo.
echo.Build finished; the PDF files are in %BUILDDIR%/latex.
goto end
)
if "%1" == "latexpdfja" (
%SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex
cd %BUILDDIR%/latex
make all-pdf-ja
cd %BUILDDIR%/..
echo.
echo.Build finished; the PDF files are in %BUILDDIR%/latex.
goto end
)
if "%1" == "text" (
%SPHINXBUILD% -b text %ALLSPHINXOPTS% %BUILDDIR%/text
if errorlevel 1 exit /b 1
echo.
echo.Build finished. The text files are in %BUILDDIR%/text.
goto end
)
if "%1" == "man" (
%SPHINXBUILD% -b man %ALLSPHINXOPTS% %BUILDDIR%/man
if errorlevel 1 exit /b 1
echo.
echo.Build finished. The manual pages are in %BUILDDIR%/man.
goto end
)
if "%1" == "texinfo" (
%SPHINXBUILD% -b texinfo %ALLSPHINXOPTS% %BUILDDIR%/texinfo
if errorlevel 1 exit /b 1
echo.
echo.Build finished. The Texinfo files are in %BUILDDIR%/texinfo.
goto end
)
if "%1" == "gettext" (
%SPHINXBUILD% -b gettext %I18NSPHINXOPTS% %BUILDDIR%/locale
if errorlevel 1 exit /b 1
echo.
echo.Build finished. The message catalogs are in %BUILDDIR%/locale.
goto end
)
if "%1" == "changes" (
%SPHINXBUILD% -b changes %ALLSPHINXOPTS% %BUILDDIR%/changes
if errorlevel 1 exit /b 1
echo.
echo.The overview file is in %BUILDDIR%/changes.
goto end
)
if "%1" == "linkcheck" (
%SPHINXBUILD% -b linkcheck %ALLSPHINXOPTS% %BUILDDIR%/linkcheck
if errorlevel 1 exit /b 1
echo.
echo.Link check complete; look for any errors in the above output ^
or in %BUILDDIR%/linkcheck/output.txt.
goto end
)
if "%1" == "doctest" (
%SPHINXBUILD% -b doctest %ALLSPHINXOPTS% %BUILDDIR%/doctest
if errorlevel 1 exit /b 1
echo.
echo.Testing of doctests in the sources finished, look at the ^
results in %BUILDDIR%/doctest/output.txt.
goto end
)
if "%1" == "xml" (
%SPHINXBUILD% -b xml %ALLSPHINXOPTS% %BUILDDIR%/xml
if errorlevel 1 exit /b 1
echo.
echo.Build finished. The XML files are in %BUILDDIR%/xml.
goto end
)
if "%1" == "pseudoxml" (
%SPHINXBUILD% -b pseudoxml %ALLSPHINXOPTS% %BUILDDIR%/pseudoxml
if errorlevel 1 exit /b 1
echo.
echo.Build finished. The pseudo-XML files are in %BUILDDIR%/pseudoxml.
goto end
)
:end
| jbm950/pysunspec | doc/make.bat | bat | mit | 6,465 |
python -m unittest discover tests
| coderjz/pypandemic | runtests.bat | bat | mit | 34 |
cmd_crypto/cryptomgr.o := /home/milind/toolchain/arm-eabi-4.6/bin/arm-eabi-ld -EL -r -o crypto/cryptomgr.o crypto/algboss.o crypto/testmgr.o
| sai9615/MY-kernel-for-grand-I9082 | dragon/crypto/.cryptomgr.o.cmd | bat | gpl-2.0 | 145 |
g:\
md school
cd school
md ics80
cd ics80
set PATH=G:\BIN;%PATH%
set TMPDIR=g:/tmp
xcopy c:\school\ics80\*.* g:\school\ics80 /e
call c:\batch\uz.bat f:\djgpp\cppstuff.zip g:\
| pip/Octology | dox/Jobz/7Studios/CygPip/bin/cppinit.bat | bat | gpl-3.0 | 184 |
call jflash.bat "%GLADIATOR_HOME%\Scripts\JFlashPro\EFR32MG13_D.jflash" "%~1" | hyller/GladiatorFirmware | Scripts/jflash_efr32mg13_d.bat | bat | unlicense | 77 |
::
:: Copyright 2016 Real Logic Ltd.
::
:: Licensed under the Apache License, Version 2.0 (the "License");
:: you may not use this file except in compliance with the License.
:: You may obtain a copy of the License at
::
:: http://www.apache.org/licenses/LICENSE-2.0
::
:: Unless required by applicable law or agreed to in writing, software
:: distributed under the License is distributed on an "AS IS" BASIS,
:: WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
:: See the License for the specific language governing permissions and
:: limitations under the License.
::
@echo off
"%JAVA_HOME%\bin\java" ^
-cp ..\build\libs\samples.jar ^
io.aeron.samples.BasicPublisher | gkamal/Aeron | aeron-samples/scripts/basic-publisher.bat | bat | apache-2.0 | 701 |
REM This file should be executed from the command line prior to the first
REM build. It will be necessary to refresh the Eclipse project once the
REM .bat file has been executed (normally just press F5 to refresh).
REM Copies all the required files from their location within the standard
REM FreeRTOS directory structure to under the Eclipse project directory.
REM This permits the Eclipse project to be used in 'managed' mode and without
REM having to setup any linked resources.
REM Have the files already been copied?
IF EXIST FreeRTOS_Source Goto END
REM Create the required directory structure.
MD FreeRTOS_Source
MD FreeRTOS_Source\include
MD FreeRTOS_Source\portable\CCS
MD FreeRTOS_Source\portable\CCS\MSP430X
MD FreeRTOS_Source\portable\MemMang
MD Demo_Source\Common_Demo_Files
MD Demo_Source\Common_Demo_Files\include
REM Copy the core kernel files.
copy ..\..\Source\tasks.c FreeRTOS_Source
copy ..\..\Source\queue.c FreeRTOS_Source
copy ..\..\Source\list.c FreeRTOS_Source
copy ..\..\Source\timers.c FreeRTOS_Source
REM Copy the common header files
copy ..\..\Source\include\*.* FreeRTOS_Source\include
REM Copy the portable layer files
copy ..\..\Source\portable\CCS\MSP430X\*.* FreeRTOS_Source\portable\CCS\MSP430X
REM Copy the basic memory allocation files
copy ..\..\Source\portable\MemMang\heap_1.c FreeRTOS_Source\portable\MemMang
REM Copy the files that define the common demo tasks.
copy ..\Common\minimal\dynamic.c Demo_Source\Common_Demo_Files
copy ..\Common\minimal\comtest.c Demo_Source\Common_Demo_Files
copy ..\Common\minimal\GenQTest.c Demo_Source\Common_Demo_Files
copy ..\Common\minimal\TimerDemo.c Demo_Source\Common_Demo_Files
copy ..\Common\minimal\countsem.c Demo_Source\Common_Demo_Files
REM Copy the common demo file headers.
copy ..\Common\include\dynamic.h Demo_Source\Common_Demo_Files\include
copy ..\Common\include\comtest.h Demo_Source\Common_Demo_Files\include
copy ..\Common\include\comtest2.h Demo_Source\Common_Demo_Files\include
copy ..\Common\include\GenQTest.h Demo_Source\Common_Demo_Files\include
copy ..\Common\include\serial.h Demo_Source\Common_Demo_Files\include
copy ..\Common\include\partest.h Demo_Source\Common_Demo_Files\include
copy ..\Common\include\TimerDemo.h Demo_Source\Common_Demo_Files\include
copy ..\Common\include\countsem.h Demo_Source\Common_Demo_Files\include
: END
| andyOsaft/02_SourceCode | freeRTOS/FreeRTOSV7.4.0/FreeRTOSV7.4.0/FreeRTOS/Demo/MSP430X_MSP430F5438_CCS/CreateProjectDirectoryStructure.bat | bat | mit | 2,394 |
SET CSCPATH=%SYSTEMROOT%\Microsoft.NET\Framework\v4.0.30319
%CSCPATH%\csc /reference:bin/Newtonsoft.Json.dll /target:library /out:bin/Com.Aspose.PDF.dll /recurse:src\*.cs /doc:bin/Com.Aspose.PDF.xml
| farooqsheikhpk/Aspose.Pdf-for-Cloud | SDKs/Aspose.Pdf-Cloud-SDK-for-.NET/compile.bat | bat | mit | 199 |
rem Copyright (c) Citrix Systems Inc.
rem All rights reserved.
rem
rem Redistribution and use in source and binary forms,
rem with or without modification, are permitted provided
rem that the following conditions are met:
rem
rem * Redistributions of source code must retain the above
rem copyright notice, this list of conditions and the
rem following disclaimer.
rem * Redistributions in binary form must reproduce the above
rem copyright notice, this list of conditions and the
rem following disclaimer in the documentation and/or other
rem materials provided with the distribution.
rem
rem THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
rem CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
rem INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
rem MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
rem DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
rem CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
rem SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
rem BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
rem SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
rem INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
rem WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
rem NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
rem OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
rem SUCH DAMAGE.
call "%VS%\VC\vcvarsall.bat" x86
msbuild.exe /p:Configuration="%CONFIGURATION%" /p:Platform="%PLATFORM%" /t:"%TARGET%" %SOLUTION%.sln
| cheng-z/win-xenguestagent | proj/msbuild.bat | bat | bsd-2-clause | 1,583 |
del *.bak /S | Rosi2143/HSHSB3_CC2 | CC2_Projects/Haus_CC2/rm_all_bak.bat | bat | mit | 12 |
:: Name: Bulky Renamer
:: Purpose: Rename files that match the desirable pattern
:: Author: felipe.faria
:: Revision: 0.1
@ECHO OFF
SETLOCAL ENABLEEXTENSIONS ENABLEDELAYEDEXPANSION
chcp 1252
SET "match=%~1"
SET "replace=%~2"
SET fileType=%3
FOR %%f IN (*.%fileType%) do (
SET fileName=%%f
SET newFileName=!fileName:%match%=%replace%!
REN "!filename!" "!newFileName!"
)
:END
ENDLOCAL
ECHO ON
@EXIT /B 0 | disparter/tools | WIN_RENAMER/renomeador.bat | bat | mit | 437 |
lua "F:\git\lua for vscode\SnippetsExport.lua"
copy "F:\git\lua for vscode\lua.json" "C:\Users\UserName\AppData\Roaming\Code\User\snippets\lua.json"
pause | tomtc123/lua-for-vscode | install.bat | bat | mit | 154 |
@IF EXIST "%~dp0\node.exe" (
"%~dp0\node.exe" "%~dp0\..\mean-cli\bin\mean-status" %*
) ELSE (
node "%~dp0\..\mean-cli\bin\mean-status" %*
) | fdecourcelle/meanfde | node_modules/meanio/node_modules/.bin/mean-status.cmd | bat | mit | 145 |
start server.py 8000
start server.py 8082
start server.py 8083
start server.py 8084
start server.py 8085
| beordle/jnu.fm | jnu-api-server/start.cmd | bat | mit | 114 |
rem php app/console cache:clear --env=prod
php app/console cache:clear --env=dev | jeka-corvus/ramax | symfony-clear-all.bat | bat | mit | 80 |
call cd ..
call grunt build --web=true | dudiq/jr | shells/build-web.bat | bat | mit | 38 |
call "..\!!nand2tetris\tools\JackCompiler.bat" "%~dp0\Snake"
pause | Fantast/nand2tetris-implementation | Chapter-09/compileSnake.bat | bat | mit | 66 |
@ECHO OFF
echo [ INFO] Build starting at %TIME% %DATE%
rem Populate feature files like feed changes by reading through the code and hooking up
rem all the calls we need, as well as processing settings files
python generateFeedChanges.py
rem Generate legacy and new settings
call npm run gen-settings --silent || goto :errexit
rem Generate features/index.js for the new features
call npm run gen-featureIndex --silent || goto :errexit
echo [ INFO] Checking code style with ESLint...
call npm run legacy-eslint --silent || goto :errexit
rem Run webpack to grab all new framework features
echo [ INFO] Webpacking new framework...
call npm run webpack --silent || goto :errexit
rem Transpile the source/ directory, putting the files in src/ which is where Kango expects to see them.
echo [ INFO] Transpiling code with Babel on ES2015 preset...
rem rd /s /q src
call npm run legacy-babel --silent || goto :errexit
rem Copy any non JS files across that babel didn't bring with it. Ignore existing files we just transpiled.
echo [ INFO] Copying non JS files...
robocopy source src /E /XC /XN /XO /NFL /NDL /NJH /NJS
rem Run the Kango build.
python lib\kango-framework-latest\kango.py build .
rem Clean up.
rd /s /q src
goto :exit
:errexit
echo Build errors encountered
:exit
echo [ INFO] Build finished at %TIME% %DATE%
| egens/toolkit-for-ynab | build.bat | bat | mit | 1,338 |
@echo off
setlocal
call :SetConfig %~dp0. %~dp0..
cabal exec runhaskell -- ^
-i%PROJECTDIR%/src/lib ^
%PROJECTDIR%/src/app/Main.hs
goto :eof
:SetConfig
set SCRIPTDIR=%~df1
set PROJECTDIR=%~df2
goto :eof
| rcook/hqdsl | script/run.cmd | bat | mit | 208 |
@ECHO OFF
REM Command file for Sphinx documentation
if "%SPHINXBUILD%" == "" (
set SPHINXBUILD=sphinx-build
)
set BUILDDIR=build
set ALLSPHINXOPTS=-d %BUILDDIR%/doctrees %SPHINXOPTS% source
if NOT "%PAPER%" == "" (
set ALLSPHINXOPTS=-D latex_paper_size=%PAPER% %ALLSPHINXOPTS%
)
if "%1" == "" goto help
if "%1" == "help" (
:help
echo.Please use `make ^<target^>` where ^<target^> is one of
echo. html to make standalone HTML files
echo. dirhtml to make HTML files named index.html in directories
echo. singlehtml to make a single large HTML file
echo. pickle to make pickle files
echo. json to make JSON files
echo. htmlhelp to make HTML files and a HTML help project
echo. qthelp to make HTML files and a qthelp project
echo. devhelp to make HTML files and a Devhelp project
echo. epub to make an epub
echo. latex to make LaTeX files, you can set PAPER=a4 or PAPER=letter
echo. text to make text files
echo. man to make manual pages
echo. changes to make an overview over all changed/added/deprecated items
echo. linkcheck to check all external links for integrity
echo. doctest to run all doctests embedded in the documentation if enabled
goto end
)
if "%1" == "clean" (
for /d %%i in (%BUILDDIR%\*) do rmdir /q /s %%i
del /q /s %BUILDDIR%\*
goto end
)
if "%1" == "html" (
%SPHINXBUILD% -b html %ALLSPHINXOPTS% %BUILDDIR%/html
if errorlevel 1 exit /b 1
echo.
echo.Build finished. The HTML pages are in %BUILDDIR%/html.
goto end
)
if "%1" == "dirhtml" (
%SPHINXBUILD% -b dirhtml %ALLSPHINXOPTS% %BUILDDIR%/dirhtml
if errorlevel 1 exit /b 1
echo.
echo.Build finished. The HTML pages are in %BUILDDIR%/dirhtml.
goto end
)
if "%1" == "singlehtml" (
%SPHINXBUILD% -b singlehtml %ALLSPHINXOPTS% %BUILDDIR%/singlehtml
if errorlevel 1 exit /b 1
echo.
echo.Build finished. The HTML pages are in %BUILDDIR%/singlehtml.
goto end
)
if "%1" == "pickle" (
%SPHINXBUILD% -b pickle %ALLSPHINXOPTS% %BUILDDIR%/pickle
if errorlevel 1 exit /b 1
echo.
echo.Build finished; now you can process the pickle files.
goto end
)
if "%1" == "json" (
%SPHINXBUILD% -b json %ALLSPHINXOPTS% %BUILDDIR%/json
if errorlevel 1 exit /b 1
echo.
echo.Build finished; now you can process the JSON files.
goto end
)
if "%1" == "htmlhelp" (
%SPHINXBUILD% -b htmlhelp %ALLSPHINXOPTS% %BUILDDIR%/htmlhelp
if errorlevel 1 exit /b 1
echo.
echo.Build finished; now you can run HTML Help Workshop with the ^
.hhp project file in %BUILDDIR%/htmlhelp.
goto end
)
if "%1" == "qthelp" (
%SPHINXBUILD% -b qthelp %ALLSPHINXOPTS% %BUILDDIR%/qthelp
if errorlevel 1 exit /b 1
echo.
echo.Build finished; now you can run "qcollectiongenerator" with the ^
.qhcp project file in %BUILDDIR%/qthelp, like this:
echo.^> qcollectiongenerator %BUILDDIR%\qthelp\pymills.qhcp
echo.To view the help file:
echo.^> assistant -collectionFile %BUILDDIR%\qthelp\pymills.ghc
goto end
)
if "%1" == "devhelp" (
%SPHINXBUILD% -b devhelp %ALLSPHINXOPTS% %BUILDDIR%/devhelp
if errorlevel 1 exit /b 1
echo.
echo.Build finished.
goto end
)
if "%1" == "epub" (
%SPHINXBUILD% -b epub %ALLSPHINXOPTS% %BUILDDIR%/epub
if errorlevel 1 exit /b 1
echo.
echo.Build finished. The epub file is in %BUILDDIR%/epub.
goto end
)
if "%1" == "latex" (
%SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex
if errorlevel 1 exit /b 1
echo.
echo.Build finished; the LaTeX files are in %BUILDDIR%/latex.
goto end
)
if "%1" == "text" (
%SPHINXBUILD% -b text %ALLSPHINXOPTS% %BUILDDIR%/text
if errorlevel 1 exit /b 1
echo.
echo.Build finished. The text files are in %BUILDDIR%/text.
goto end
)
if "%1" == "man" (
%SPHINXBUILD% -b man %ALLSPHINXOPTS% %BUILDDIR%/man
if errorlevel 1 exit /b 1
echo.
echo.Build finished. The manual pages are in %BUILDDIR%/man.
goto end
)
if "%1" == "changes" (
%SPHINXBUILD% -b changes %ALLSPHINXOPTS% %BUILDDIR%/changes
if errorlevel 1 exit /b 1
echo.
echo.The overview file is in %BUILDDIR%/changes.
goto end
)
if "%1" == "linkcheck" (
%SPHINXBUILD% -b linkcheck %ALLSPHINXOPTS% %BUILDDIR%/linkcheck
if errorlevel 1 exit /b 1
echo.
echo.Link check complete; look for any errors in the above output ^
or in %BUILDDIR%/linkcheck/output.txt.
goto end
)
if "%1" == "doctest" (
%SPHINXBUILD% -b doctest %ALLSPHINXOPTS% %BUILDDIR%/doctest
if errorlevel 1 exit /b 1
echo.
echo.Testing of doctests in the sources finished, look at the ^
results in %BUILDDIR%/doctest/output.txt.
goto end
)
:end
| prologic/pymills | docs/make.bat | bat | mit | 4,517 |
@ECHO OFF
REM Command file for Sphinx documentation
if "%SPHINXBUILD%" == "" (
set SPHINXBUILD=sphinx-build
)
set BUILDDIR=_build
set ALLSPHINXOPTS=-d %BUILDDIR%/doctrees %SPHINXOPTS% .
set I18NSPHINXOPTS=%SPHINXOPTS% .
if NOT "%PAPER%" == "" (
set ALLSPHINXOPTS=-D latex_paper_size=%PAPER% %ALLSPHINXOPTS%
set I18NSPHINXOPTS=-D latex_paper_size=%PAPER% %I18NSPHINXOPTS%
)
if "%1" == "" goto help
if "%1" == "help" (
:help
echo.Please use `make ^<target^>` where ^<target^> is one of
echo. html to make standalone HTML files
echo. dirhtml to make HTML files named index.html in directories
echo. singlehtml to make a single large HTML file
echo. pickle to make pickle files
echo. json to make JSON files
echo. htmlhelp to make HTML files and a HTML help project
echo. qthelp to make HTML files and a qthelp project
echo. devhelp to make HTML files and a Devhelp project
echo. epub to make an epub
echo. latex to make LaTeX files, you can set PAPER=a4 or PAPER=letter
echo. text to make text files
echo. man to make manual pages
echo. texinfo to make Texinfo files
echo. gettext to make PO message catalogs
echo. changes to make an overview over all changed/added/deprecated items
echo. xml to make Docutils-native XML files
echo. pseudoxml to make pseudoxml-XML files for display purposes
echo. linkcheck to check all external links for integrity
echo. doctest to run all doctests embedded in the documentation if enabled
echo. coverage to run coverage check of the documentation if enabled
goto end
)
if "%1" == "clean" (
for /d %%i in (%BUILDDIR%\*) do rmdir /q /s %%i
del /q /s %BUILDDIR%\*
goto end
)
REM Check if sphinx-build is available and fallback to Python version if any
%SPHINXBUILD% 1>NUL 2>NUL
if errorlevel 9009 goto sphinx_python
goto sphinx_ok
:sphinx_python
set SPHINXBUILD=python -m sphinx.__init__
%SPHINXBUILD% 2> nul
if errorlevel 9009 (
echo.
echo.The 'sphinx-build' command was not found. Make sure you have Sphinx
echo.installed, then set the SPHINXBUILD environment variable to point
echo.to the full path of the 'sphinx-build' executable. Alternatively you
echo.may add the Sphinx directory to PATH.
echo.
echo.If you don't have Sphinx installed, grab it from
echo.http://sphinx-doc.org/
exit /b 1
)
:sphinx_ok
if "%1" == "html" (
%SPHINXBUILD% -b html %ALLSPHINXOPTS% %BUILDDIR%/html
if errorlevel 1 exit /b 1
echo.
echo.Build finished. The HTML pages are in %BUILDDIR%/html.
goto end
)
if "%1" == "dirhtml" (
%SPHINXBUILD% -b dirhtml %ALLSPHINXOPTS% %BUILDDIR%/dirhtml
if errorlevel 1 exit /b 1
echo.
echo.Build finished. The HTML pages are in %BUILDDIR%/dirhtml.
goto end
)
if "%1" == "singlehtml" (
%SPHINXBUILD% -b singlehtml %ALLSPHINXOPTS% %BUILDDIR%/singlehtml
if errorlevel 1 exit /b 1
echo.
echo.Build finished. The HTML pages are in %BUILDDIR%/singlehtml.
goto end
)
if "%1" == "pickle" (
%SPHINXBUILD% -b pickle %ALLSPHINXOPTS% %BUILDDIR%/pickle
if errorlevel 1 exit /b 1
echo.
echo.Build finished; now you can process the pickle files.
goto end
)
if "%1" == "json" (
%SPHINXBUILD% -b json %ALLSPHINXOPTS% %BUILDDIR%/json
if errorlevel 1 exit /b 1
echo.
echo.Build finished; now you can process the JSON files.
goto end
)
if "%1" == "htmlhelp" (
%SPHINXBUILD% -b htmlhelp %ALLSPHINXOPTS% %BUILDDIR%/htmlhelp
if errorlevel 1 exit /b 1
echo.
echo.Build finished; now you can run HTML Help Workshop with the ^
.hhp project file in %BUILDDIR%/htmlhelp.
goto end
)
if "%1" == "qthelp" (
%SPHINXBUILD% -b qthelp %ALLSPHINXOPTS% %BUILDDIR%/qthelp
if errorlevel 1 exit /b 1
echo.
echo.Build finished; now you can run "qcollectiongenerator" with the ^
.qhcp project file in %BUILDDIR%/qthelp, like this:
echo.^> qcollectiongenerator %BUILDDIR%\qthelp\py-opc.qhcp
echo.To view the help file:
echo.^> assistant -collectionFile %BUILDDIR%\qthelp\py-opc.ghc
goto end
)
if "%1" == "devhelp" (
%SPHINXBUILD% -b devhelp %ALLSPHINXOPTS% %BUILDDIR%/devhelp
if errorlevel 1 exit /b 1
echo.
echo.Build finished.
goto end
)
if "%1" == "epub" (
%SPHINXBUILD% -b epub %ALLSPHINXOPTS% %BUILDDIR%/epub
if errorlevel 1 exit /b 1
echo.
echo.Build finished. The epub file is in %BUILDDIR%/epub.
goto end
)
if "%1" == "latex" (
%SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex
if errorlevel 1 exit /b 1
echo.
echo.Build finished; the LaTeX files are in %BUILDDIR%/latex.
goto end
)
if "%1" == "latexpdf" (
%SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex
cd %BUILDDIR%/latex
make all-pdf
cd %~dp0
echo.
echo.Build finished; the PDF files are in %BUILDDIR%/latex.
goto end
)
if "%1" == "latexpdfja" (
%SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex
cd %BUILDDIR%/latex
make all-pdf-ja
cd %~dp0
echo.
echo.Build finished; the PDF files are in %BUILDDIR%/latex.
goto end
)
if "%1" == "text" (
%SPHINXBUILD% -b text %ALLSPHINXOPTS% %BUILDDIR%/text
if errorlevel 1 exit /b 1
echo.
echo.Build finished. The text files are in %BUILDDIR%/text.
goto end
)
if "%1" == "man" (
%SPHINXBUILD% -b man %ALLSPHINXOPTS% %BUILDDIR%/man
if errorlevel 1 exit /b 1
echo.
echo.Build finished. The manual pages are in %BUILDDIR%/man.
goto end
)
if "%1" == "texinfo" (
%SPHINXBUILD% -b texinfo %ALLSPHINXOPTS% %BUILDDIR%/texinfo
if errorlevel 1 exit /b 1
echo.
echo.Build finished. The Texinfo files are in %BUILDDIR%/texinfo.
goto end
)
if "%1" == "gettext" (
%SPHINXBUILD% -b gettext %I18NSPHINXOPTS% %BUILDDIR%/locale
if errorlevel 1 exit /b 1
echo.
echo.Build finished. The message catalogs are in %BUILDDIR%/locale.
goto end
)
if "%1" == "changes" (
%SPHINXBUILD% -b changes %ALLSPHINXOPTS% %BUILDDIR%/changes
if errorlevel 1 exit /b 1
echo.
echo.The overview file is in %BUILDDIR%/changes.
goto end
)
if "%1" == "linkcheck" (
%SPHINXBUILD% -b linkcheck %ALLSPHINXOPTS% %BUILDDIR%/linkcheck
if errorlevel 1 exit /b 1
echo.
echo.Link check complete; look for any errors in the above output ^
or in %BUILDDIR%/linkcheck/output.txt.
goto end
)
if "%1" == "doctest" (
%SPHINXBUILD% -b doctest %ALLSPHINXOPTS% %BUILDDIR%/doctest
if errorlevel 1 exit /b 1
echo.
echo.Testing of doctests in the sources finished, look at the ^
results in %BUILDDIR%/doctest/output.txt.
goto end
)
if "%1" == "coverage" (
%SPHINXBUILD% -b coverage %ALLSPHINXOPTS% %BUILDDIR%/coverage
if errorlevel 1 exit /b 1
echo.
echo.Testing of coverage in the sources finished, look at the ^
results in %BUILDDIR%/coverage/python.txt.
goto end
)
if "%1" == "xml" (
%SPHINXBUILD% -b xml %ALLSPHINXOPTS% %BUILDDIR%/xml
if errorlevel 1 exit /b 1
echo.
echo.Build finished. The XML files are in %BUILDDIR%/xml.
goto end
)
if "%1" == "pseudoxml" (
%SPHINXBUILD% -b pseudoxml %ALLSPHINXOPTS% %BUILDDIR%/pseudoxml
if errorlevel 1 exit /b 1
echo.
echo.Build finished. The pseudo-XML files are in %BUILDDIR%/pseudoxml.
goto end
)
:end
| dhhagan/py-opc | docs/make.bat | bat | mit | 6,986 |
set CYGWIN_PATH=C:\cygwin\bin
set CYGWIN=nodosfilewarning
set A661_XML=%SCADE_PATH%\SCADE Display\config\Workspace\environments\UAPageCreator\A661Norm\a661.xml
set DF_PATH=..\DefinitionFile
set DF_NAME=ts05
set USER_DF=%DF_PATH%\%DF_NAME%.sgfx
set CUSTOM_DF_PATH=%DF_PATH%\INTEGRATION_%DF_NAME%DF
set CUSTOM_DF=%CUSTOM_DF_PATH%\%DF_NAME%.sgfx
set CUSTOM_DF_CONF=%CUSTOM_DF_PATH%\server_conf.xml
set CUSTOM_DF_BIN=%CUSTOM_DF_PATH%\%DF_NAME%.bin
set UA_PATH=..\UserApplication
set UA_NAME=ts05
set UA_NODE=ts05
set USER_UA=%UA_PATH%\%UA_NAME%.etp
set UA_CODE_PATH=%UA_PATH%\KCG
set DF_UA_CONNECTION_FILE=%UA_PATH%\%UA_NAME%.sdy
set APP_ID=10
set OBJDIR=bin
set EXEC=UserApplication.exe
set DF_SERVER_IP=127.0.0.1
set /a DF_SERVER_PORT=1230+%APP_ID%
set BROADCAST_GROUP=224.255.255.255
set BROADCAST_PORT=12340
set NETWORK_INTERFACE=127.0.0.1
| projeto-si-lansab/si-lansab | Satellite/TS05IntegrationTest/IntegrationCode/Configuration.bat | bat | gpl-2.0 | 854 |
rem Build command for Visual Studio 2019
rem This used to start with:
rem nmake -f makefile.windows ^
rem But nowadays we use JOM for parallel builds:
jom /j32 -f makefile.windows ^
LIBRESSL_INC_DIR="c:\projects\unrealircd-6-libs\libressl\include" ^
LIBRESSL_LIB_DIR="c:\projects\unrealircd-6-libs\libressl\lib" ^
SSLLIB="crypto-47.lib ssl-50.lib" ^
USE_REMOTEINC=1 ^
LIBCURL_INC_DIR="c:\projects\unrealircd-6-libs\curl\include" ^
LIBCURL_LIB_DIR="c:\projects\unrealircd-6-libs\curl\builds\libcurl-vc-x64-release-dll-ssl-dll-cares-dll-ipv6-obj-lib" ^
CARES_LIB_DIR="c:\projects\unrealircd-6-libs\c-ares\msvc\cares\dll-release" ^
CARES_INC_DIR="c:\projects\unrealircd-6-libs\c-ares\include" ^
CARESLIB="cares.lib" ^
PCRE2_INC_DIR="c:\projects\unrealircd-6-libs\pcre2\include" ^
PCRE2_LIB_DIR="c:\projects\unrealircd-6-libs\pcre2\lib" ^
PCRE2LIB="pcre2-8.lib" ^
ARGON2_LIB_DIR="c:\projects\unrealircd-6-libs\argon2\vs2015\build" ^
ARGON2_INC_DIR="c:\projects\unrealircd-6-libs\argon2\include" ^
ARGON2LIB="Argon2RefDll.lib" ^
SODIUM_LIB_DIR="c:\projects\unrealircd-6-libs\libsodium\bin\x64\Release\v142\dynamic" ^
SODIUM_INC_DIR="c:\projects\unrealircd-6-libs\libsodium\src\libsodium\include" ^
SODIUMLIB="libsodium.lib" ^
JANSSON_LIB_DIR="c:\projects\unrealircd-6-libs\jansson\lib" ^
JANSSON_INC_DIR="c:\projects\unrealircd-6-libs\jansson\include" ^
JANSSONLIB="jansson.lib" ^
GEOIPCLASSIC_LIB_DIR="c:\projects\unrealircd-6-libs\GeoIP\libGeoIP" ^
GEOIPCLASSIC_INC_DIR="c:\projects\unrealircd-6-libs\GeoIP\libGeoIP" ^
GEOIPCLASSICLIB="GeoIP.lib" %*
| unrealircd/unrealircd | extras/build-tests/windows/compilecmd/vs2019.bat | bat | gpl-2.0 | 1,548 |
cmd_fs/partitions/built-in.o := /home/selva/android/kernel/Android_Toolchains/arm-eabi-4.4.3/bin/arm-eabi-ld -EL -r -o fs/partitions/built-in.o fs/partitions/check.o fs/partitions/msdos.o fs/partitions/efi.o
| selva-simple/Galaxy-R-Kernel | fs/partitions/.built-in.o.cmd | bat | gpl-2.0 | 213 |
cmd_block/built-in.o := arm-eabi-ld -EL -r -o block/built-in.o block/elevator.o block/blk-core.o block/blk-tag.o block/blk-sysfs.o block/blk-barrier.o block/blk-settings.o block/blk-ioc.o block/blk-map.o block/blk-exec.o block/blk-merge.o block/blk-softirq.o block/blk-timeout.o block/blk-iopoll.o block/blk-lib.o block/ioctl.o block/genhd.o block/scsi_ioctl.o block/noop-iosched.o
| timmytim/honeybutter_kernel | block/.built-in.o.cmd | bat | gpl-2.0 | 387 |
cmd_scripts/dtc/flattree.o := gcc -Wp,-MD,scripts/dtc/.flattree.o.d -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer -Iscripts/dtc -Iscripts/dtc/libfdt -c -o scripts/dtc/flattree.o scripts/dtc/flattree.c
source_scripts/dtc/flattree.o := scripts/dtc/flattree.c
deps_scripts/dtc/flattree.o := \
/usr/include/stdc-predef.h \
scripts/dtc/dtc.h \
/usr/include/stdio.h \
/usr/include/features.h \
/usr/include/x86_64-linux-gnu/sys/cdefs.h \
/usr/include/x86_64-linux-gnu/bits/wordsize.h \
/usr/include/x86_64-linux-gnu/gnu/stubs.h \
/usr/include/x86_64-linux-gnu/gnu/stubs-64.h \
/usr/lib/gcc/x86_64-linux-gnu/4.9/include/stddef.h \
/usr/include/x86_64-linux-gnu/bits/types.h \
/usr/include/x86_64-linux-gnu/bits/typesizes.h \
/usr/include/libio.h \
/usr/include/_G_config.h \
/usr/include/wchar.h \
/usr/lib/gcc/x86_64-linux-gnu/4.9/include/stdarg.h \
/usr/include/x86_64-linux-gnu/bits/stdio_lim.h \
/usr/include/x86_64-linux-gnu/bits/sys_errlist.h \
/usr/include/x86_64-linux-gnu/bits/stdio.h \
/usr/include/string.h \
/usr/include/xlocale.h \
/usr/include/x86_64-linux-gnu/bits/string.h \
/usr/include/x86_64-linux-gnu/bits/string2.h \
/usr/include/endian.h \
/usr/include/x86_64-linux-gnu/bits/endian.h \
/usr/include/x86_64-linux-gnu/bits/byteswap.h \
/usr/include/x86_64-linux-gnu/bits/byteswap-16.h \
/usr/include/stdlib.h \
/usr/include/x86_64-linux-gnu/bits/waitflags.h \
/usr/include/x86_64-linux-gnu/bits/waitstatus.h \
/usr/include/x86_64-linux-gnu/sys/types.h \
/usr/include/time.h \
/usr/include/x86_64-linux-gnu/sys/select.h \
/usr/include/x86_64-linux-gnu/bits/select.h \
/usr/include/x86_64-linux-gnu/bits/sigset.h \
/usr/include/x86_64-linux-gnu/bits/time.h \
/usr/include/x86_64-linux-gnu/sys/sysmacros.h \
/usr/include/x86_64-linux-gnu/bits/pthreadtypes.h \
/usr/include/alloca.h \
/usr/include/x86_64-linux-gnu/bits/stdlib-bsearch.h \
/usr/include/x86_64-linux-gnu/bits/stdlib-float.h \
/usr/lib/gcc/x86_64-linux-gnu/4.9/include/stdint.h \
/usr/include/stdint.h \
/usr/include/x86_64-linux-gnu/bits/wchar.h \
/usr/lib/gcc/x86_64-linux-gnu/4.9/include/stdbool.h \
/usr/include/assert.h \
/usr/include/ctype.h \
/usr/include/errno.h \
/usr/include/x86_64-linux-gnu/bits/errno.h \
/usr/include/linux/errno.h \
/usr/include/x86_64-linux-gnu/asm/errno.h \
/usr/include/asm-generic/errno.h \
/usr/include/asm-generic/errno-base.h \
/usr/include/unistd.h \
/usr/include/x86_64-linux-gnu/bits/posix_opt.h \
/usr/include/x86_64-linux-gnu/bits/environments.h \
/usr/include/x86_64-linux-gnu/bits/confname.h \
/usr/include/getopt.h \
scripts/dtc/libfdt/libfdt_env.h \
scripts/dtc/libfdt/fdt.h \
scripts/dtc/util.h \
scripts/dtc/srcpos.h \
scripts/dtc/flattree.o: $(deps_scripts/dtc/flattree.o)
$(deps_scripts/dtc/flattree.o):
| jashasweejena/VibeKernel | scripts/dtc/.flattree.o.cmd | bat | gpl-2.0 | 2,883 |
cmd_drivers/net/ethernet/sis/built-in.o := rm -f drivers/net/ethernet/sis/built-in.o; /home/flint/android/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.6/bin/arm-linux-androideabi-ar rcsD drivers/net/ethernet/sis/built-in.o
| lindsaytheflint/stone | drivers/net/ethernet/sis/.built-in.o.cmd | bat | gpl-2.0 | 231 |
cmd_drivers/net/wireless/iwmc3200wifi/built-in.o := rm -f drivers/net/wireless/iwmc3200wifi/built-in.o; arm-none-linux-gnueabi-ar rcs drivers/net/wireless/iwmc3200wifi/built-in.o
| EAVR/EV3.14 | ev3sources/extra/linux-03.20.00.13/drivers/net/wireless/iwmc3200wifi/.built-in.o.cmd | bat | gpl-2.0 | 180 |
:: (c) Copyright 2009 - 2010 Xilinx, Inc. All rights reserved.
::
:: This file contains confidential and proprietary information
:: of Xilinx, Inc. and is protected under U.S. and
:: international copyright and other intellectual property
:: laws.
::
:: DISCLAIMER
:: This disclaimer is not a license and does not grant any
:: rights to the materials distributed herewith. Except as
:: otherwise provided in a valid license issued to you by
:: Xilinx, and to the maximum extent permitted by applicable
:: law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
:: WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
:: AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
:: BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
:: INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
:: (2) Xilinx shall not be liable (whether in contract or tort,
:: including negligence, or under any other theory of
:: liability) for any loss or damage of any kind or nature
:: related to, arising under or in connection with these
:: materials, including for any direct, or any indirect,
:: special, incidental, or consequential loss or damage
:: (including loss of data, profits, goodwill, or any type of
:: loss or damage suffered as a result of any action brought
:: by a third party) even if such damage or loss was
:: reasonably foreseeable or Xilinx had been advised of the
:: possibility of the same.
::
:: CRITICAL APPLICATIONS
:: Xilinx products are not designed or intended to be fail-
:: safe, or for use in any application requiring fail-safe
:: performance, such as life-support or safety devices or
:: systems, Class III medical devices, nuclear facilities,
:: applications related to the deployment of airbags, or any
:: other applications that could lead to death, personal
:: injury, or severe property or environmental damage
:: (individually and collectively, "Critical
:: Applications"). Customer assumes the sole risk and
:: liability of any use of Xilinx products in Critical
:: Applications, subject only to applicable laws and
:: regulations governing limitations on product liability.
::
:: THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
:: PART OF THIS FILE AT ALL TIMES.
echo "Compiling Core Verilog UNISIM/Behavioral model"
vlogcomp -work work ..\\..\\implement\\results\\routed.v
echo "Compiling Test Bench Files"
vhpcomp -work work ..\\counter_fifo_pkg.vhd
vhpcomp -work work ..\\counter_fifo_rng.vhd
vhpcomp -work work ..\\counter_fifo_dgen.vhd
vhpcomp -work work ..\\counter_fifo_dverif.vhd
vhpcomp -work work ..\\counter_fifo_pctrl.vhd
vhpcomp -work work ..\\counter_fifo_synth.vhd
vhpcomp -work work ..\\counter_fifo_tb.vhd
fuse work.counter_fifo_tb work.glbl -L simprims_ver -o counter_fifo_tb.exe
.\\counter_fifo_tb.exe -sdfmax /counter_fifo_tb/counter_fifo_synth_inst/counter_fifo_inst=..\\..\\implement\\results\\routed.sdf -gui -tclbatch .\\wave_isim.tcl
| v3best/R7Lite | R7Lite_PCIE/fpga_code/r7lite_DMA/ipcore_dir/counter_fifo/simulation/timing/simulate_isim.bat | bat | gpl-2.0 | 2,921 |
cmd_security/built-in.o := /opt/toolchains/arm-2009q3/bin/arm-none-eabi-ld -EL -r -o security/built-in.o security/commoncap.o security/min_addr.o
| dizgustipated/BOCA-2.6.35.14 | security/.built-in.o.cmd | bat | gpl-2.0 | 151 |
cmd_fs/fat/fat.o := /home/utkanos/android/ginger/prebuilt/linux-x86/toolchain/arm-eabi-4.4.0/bin/arm-eabi-ld -EL -r -o fs/fat/fat.o fs/fat/cache.o fs/fat/dir.o fs/fat/fatent.o fs/fat/file.o fs/fat/inode.o fs/fat/misc.o
| utkanos/android_htc_mecha_kernel_5slot | fs/fat/.fat.o.cmd | bat | gpl-2.0 | 223 |
>>> # Print the inverted dictionary
... observations_sorted = sorted(observations_to_birds_list.keys())
>>> for observations in observations_sorted:
... print(observations, ':', end=" ")
... for bird in observations_to_birds_list[observations]:
... print(' ', bird, end=" ")
... print()
...
1 : northern fulmar snow goose
2 : long-tailed jaeger
5 : canada goose
| simontakite/sysadmin | pythonscripts/practicalprogramming/setdict/countbirds5.cmd | bat | gpl-2.0 | 390 |
cmd_drivers/net/ethernet/marvell/built-in.o := rm -f drivers/net/ethernet/marvell/built-in.o; /home/flint/android/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.6/bin/arm-linux-androideabi-ar rcsD drivers/net/ethernet/marvell/built-in.o
| lindsaytheflint/stone | drivers/net/ethernet/marvell/.built-in.o.cmd | bat | gpl-2.0 | 243 |
@ECHO OFF
REM set MAVEN_HOME=C:\Program Files\apache-maven-3.0.5
REM set PATH=%MAVEN_HOME%\bin;%PATH%
REM Needed to parse XSD files
call mvn install:install-file -DgroupId=oracle -DartifactId=ojdbc -Dversion=12.1.0.1 -Dpackaging=jar -Dfile=ojdbc6.jar -DgeneratePom=true
call mvn install:install-file -DgroupId=elaprendiz -DartifactId=elaprendiz -Dversion=1.0 -Dpackaging=jar -Dfile=swinger.jar -DgeneratePom=true
call mvn install:install-file -DgroupId=jcl -DartifactId=jcl -Dversion=1.0 -Dpackaging=jar -Dfile=jcl.jar -DgeneratePom=true
call mvn install:install-file -DgroupId=jpos-controls -DartifactId=jpos-controls -Dversion=1.0 -Dpackaging=jar -Dfile=jpos-controls.jar -DgeneratePom=true
call mvn install:install-file -DgroupId=stario -DartifactId=stario -Dversion=1.0 -Dpackaging=jar -Dfile=stario.jar -DgeneratePom=true
call mvn install:install-file -DgroupId=starjavapos -DartifactId=starjavapos -Dversion=1.0 -Dpackaging=jar -Dfile=starjavapos.jar -DgeneratePom=true
call mvn install:install-file -DgroupId=jcalendar -DartifactId=jcalendar -Dversion=1.0 -Dpackaging=jar -Dfile=jcalendar.jar -DgeneratePom=true
call mvn install:install-file -DgroupId=jdev-rt -DartifactId=jdev-rt -Dversion=1.0 -Dpackaging=jar -Dfile=jdev-rt.jar -DgeneratePom=true
call mvn install:install-file -DgroupId=NameGenerator -DartifactId=NameGenerator -Dversion=1.0 -Dpackaging=jar -Dfile=NameGenerator.jar -DgeneratePom=true
call mvn install:install-file -DgroupId=eckerd-XML -DartifactId=eckerd-XML -Dversion=1.0 -Dpackaging=jar -Dfile=eckerd-XML.jar -DgeneratePom=true
call mvn install:install-file -DgroupId=xbean -DartifactId=xbean -Dversion=1.0 -Dpackaging=jar -Dfile=xbean.jar -DgeneratePom=true
call mvn install:install-file -DgroupId=CAD_File -DartifactId=CAD_File -Dversion=1.0 -Dpackaging=jar -Dfile=CAD_File.jar -DgeneratePom=true
| AlanGuerraQuispe/SisAtuxVenta | dependency/install-maven-deps.bat | bat | gpl-2.0 | 1,850 |
nasmw -f bin -oopndr_98.com opndr_98.asm
| rururutan/hoot-patches | pc98/infinity/opndrv/src/comp.bat | bat | gpl-3.0 | 41 |
SET KOMPAS=c:\vlx\KOMPAS
call c:\vlx\kompas\cad_sf.exe %1
| mnasoft/MNAS_acad_utils | acad_w.sup/kompas/CAD_SF.bat | bat | gpl-3.0 | 60 |
@echo off
setlocal enabledelayedexpansion
set "FullScriptPath=%~dp0"
set "FullExecPath=%cd%"
set "Command=%1"
if "%Command%" == "test" (
call :write_test %2
exit /b %errorlevel%
) else if "%Command%" == "header" (
call :write_header %2
exit /b %errorlevel%
) else if "%Command%" == "source" (
call :write_source %2
exit /b %errorlevel%
) else if "%Command%" == "" (
echo This is an utility for fast blank module creation.
echo Please provide module path.
exit /b
)
call :write_module %Command%
exit /b %errorlevel%
:write_module
(
set "CommandPath=%1"
set "CommandPathUnix=!CommandPath:\=/!"
if "!CommandPathUnix!" == "" (
echo Provide module path.
exit /b 1
)
echo Generating module !CommandPathUnix!..
call create.bat header !CommandPathUnix!
call create.bat source !CommandPathUnix!
exit /b
)
:write_header
(
set "CommandPath=%1"
set "CommandPathUnix=!CommandPath:\=/!"
set "CommandPathWin=!CommandPath:/=\!"
if "!CommandPathUnix!" == "" (
echo Provide header path.
exit /b 1
) else if exist "SourceFiles\!CommandPathWin!.h" (
echo This header already exists.
exit /b 1
)
echo Generating header !CommandPathUnix!.h..
mkdir "SourceFiles\!CommandPathWin!.h"
rmdir "SourceFiles\!CommandPathWin!.h"
call :write_comment !CommandPathWin!.h
set "header1=#pragma once"
(
echo !header1!
echo.
)>> "SourceFiles\!CommandPathWin!.h"
exit /b
)
:write_source
(
set "CommandPath=%1"
set "CommandPathUnix=!CommandPath:\=/!"
set "CommandPathWin=!CommandPath:/=\!"
if "!CommandPathUnix!" == "" (
echo Provide source path.
exit /b 1
) else if exist "SourceFiles\!CommandPathWin!.cpp" (
echo This source already exists.
exit /b 1
)
echo Generating source !CommandPathUnix!.cpp..
mkdir "SourceFiles\!CommandPathWin!.cpp"
rmdir "SourceFiles\!CommandPathWin!.cpp"
call :write_comment !CommandPathWin!.cpp
set "quote="""
set "quote=!quote:~0,1!"
set "source1=#include !quote!!CommandPathUnix!.h!quote!"
(
echo !source1!
echo.
)>> "SourceFiles\!CommandPathWin!.cpp"
exit /b
)
:write_test
(
set "CommandPath=%1"
set "CommandPathUnix=!CommandPath:\=/!"
set "CommandPathWin=!CommandPath:/=\!"
if "!CommandPathUnix!" == "" (
echo Provide source path.
exit /b 1
) else if exist "SourceFiles\!CommandPathWin!.cpp" (
echo This source already exists.
exit /b 1
)
echo Generating test !CommandPathUnix!.cpp..
mkdir "SourceFiles\!CommandPathWin!.cpp"
rmdir "SourceFiles\!CommandPathWin!.cpp"
call :write_comment !CommandPathWin!.cpp
set "quote="""
set "quote=!quote:~0,1!"
set "source1=#include !quote!catch.hpp!quote!"
(
echo !source1!
echo.
)>> "SourceFiles\!CommandPathWin!.cpp"
exit /b
)
:write_comment
(
set "Path=%1"
(
echo /*
echo This file is part of Telegram Desktop,
echo the official desktop version of Telegram messaging app, see https://telegram.org
echo.
echo Telegram Desktop is free software: you can redistribute it and/or modify
echo it under the terms of the GNU General Public License as published by
echo the Free Software Foundation, either version 3 of the License, or
echo ^(at your option^) any later version.
echo.
echo It is distributed in the hope that it will be useful,
echo but WITHOUT ANY WARRANTY; without even the implied warranty of
echo MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
echo GNU General Public License for more details.
echo.
echo In addition, as a special exception, the copyright holders give permission
echo to link the code of portions of this program with the OpenSSL library.
echo.
echo Full license: https://github.com/telegramdesktop/tdesktop/blob/master/LICENSE
echo Copyright ^(c^) 2014-2017 John Preston, https://desktop.telegram.org
echo */
)> "SourceFiles\!Path!"
exit /b
)
| 2asoft/tdesktop | Telegram/create.bat | bat | gpl-3.0 | 3,926 |
forfiles -p "C:\Users\delio\AppData\Local\Temp" -s -m *.png /D -1 /C "cmd /c del @path"
forfiles -p "C:\Users\delio\AppData\Local\Temp" -s -m *.pgm /D -1 /C "cmd /c del @path" | AenBleidd/Scripts | DeleteOldFilesAfterSPEL.bat | bat | gpl-3.0 | 175 |
@echo off
cd %~dp0
server.cmd %* stop
| releasemgn/urm | bin/server.stop.cmd | bat | gpl-3.0 | 43 |
/* cmd/status.cmd - NexusServV3
* Copyright (C) 2012-2013 #Nexus project
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
$amlc = 0;
$amcc = 0;
$params = $paramzz;
global $userinfo, $botnick, $god, $modules;
$lnick = strtolower($nick);
$acc = $userinfo["$lnick"]["auth"];
$saxs = 0;
$fop = fopen("./conf/staff.conf","r+t");
while ($fra = fgets($fop)) {
$fra = str_replace("\r","",$fra);
$fra = str_replace("\n","",$fra);
$frg = explode(" ",$fra);
if (strtolower($frg[0]) == strtolower($acc)) {
$saxs = $frg[1];
}
}
fclose($fop);
$ccchan = $cchan;
if ($cchan[0] != "#") {
$ccchan = "";
}
$command = $GLOBALS['msg'];
if ($saxs >= 950) {
sendserv("NOTICE $nick :\002Loaded modules - status report:\002");
foreach ($modules as $modname => $modcontent) {
$mlc = 0;
$modexp = explode("\n",$modules[$modname]);
foreach ($modexp as $modexps) {
$mlc++;
}
sendserv("NOTICE $nick :".str_replace("./cmd/","",$modname).", 1 command ($mlc lines)");
$amcc = $amcc + 1;
$amlc = $amlc + $mlc;
}
$mcode = file('nexusserv.php');
$tcode = file('./inc/time_handler.php');
$amlc = $amlc + count($mcode) + count($tcode);
sendserv("NOTICE $nick :Main Code (Core) : ".round(filesize('nexusserv.php')/1024,0)."KBytes (".count($mcode)." Lines)");
sendserv("NOTICE $nick :Time Handler Code: ".round(filesize('./inc/time_handler.php')/1024,0)."KBytes (".count($tcode)." Lines)");
sendserv("NOTICE $nick :\002End of list.\002 $amcc Commands ($amlc Lines)");
if($showdebug == true){
sendserv("NOTICE $debugchannel :($ccchan) [$nick:$acc] $command $paramzz");
}
} else {
sendserv("NOTICE $nick :You lack sufficient staff access to use this command!");
} | Nexus-IRC/NexusServV3 | cmd/status.cmd | bat | gpl-3.0 | 2,270 |
@ECHO OFF
REM Command file for Sphinx documentation
if "%SPHINXBUILD%" == "" (
set SPHINXBUILD=sphinx-build
)
set BUILDDIR=_build
set ALLSPHINXOPTS=-d %BUILDDIR%/doctrees %SPHINXOPTS% .
if NOT "%PAPER%" == "" (
set ALLSPHINXOPTS=-D latex_paper_size=%PAPER% %ALLSPHINXOPTS%
)
if "%1" == "" goto help
if "%1" == "help" (
:help
echo.Please use `make ^<target^>` where ^<target^> is one of
echo. html to make standalone HTML files
echo. dirhtml to make HTML files named index.html in directories
echo. singlehtml to make a single large HTML file
echo. pickle to make pickle files
echo. json to make JSON files
echo. htmlhelp to make HTML files and a HTML help project
echo. qthelp to make HTML files and a qthelp project
echo. devhelp to make HTML files and a Devhelp project
echo. epub to make an epub
echo. latex to make LaTeX files, you can set PAPER=a4 or PAPER=letter
echo. text to make text files
echo. man to make manual pages
echo. changes to make an overview over all changed/added/deprecated items
echo. linkcheck to check all external links for integrity
echo. doctest to run all doctests embedded in the documentation if enabled
goto end
)
if "%1" == "clean" (
for /d %%i in (%BUILDDIR%\*) do rmdir /q /s %%i
del /q /s %BUILDDIR%\*
goto end
)
if "%1" == "html" (
%SPHINXBUILD% -b html %ALLSPHINXOPTS% %BUILDDIR%/html
echo.
echo.Build finished. The HTML pages are in %BUILDDIR%/html.
goto end
)
if "%1" == "dirhtml" (
%SPHINXBUILD% -b dirhtml %ALLSPHINXOPTS% %BUILDDIR%/dirhtml
echo.
echo.Build finished. The HTML pages are in %BUILDDIR%/dirhtml.
goto end
)
if "%1" == "singlehtml" (
%SPHINXBUILD% -b singlehtml %ALLSPHINXOPTS% %BUILDDIR%/singlehtml
echo.
echo.Build finished. The HTML pages are in %BUILDDIR%/singlehtml.
goto end
)
if "%1" == "pickle" (
%SPHINXBUILD% -b pickle %ALLSPHINXOPTS% %BUILDDIR%/pickle
echo.
echo.Build finished; now you can process the pickle files.
goto end
)
if "%1" == "json" (
%SPHINXBUILD% -b json %ALLSPHINXOPTS% %BUILDDIR%/json
echo.
echo.Build finished; now you can process the JSON files.
goto end
)
if "%1" == "htmlhelp" (
%SPHINXBUILD% -b htmlhelp %ALLSPHINXOPTS% %BUILDDIR%/htmlhelp
echo.
echo.Build finished; now you can run HTML Help Workshop with the ^
.hhp project file in %BUILDDIR%/htmlhelp.
goto end
)
if "%1" == "qthelp" (
%SPHINXBUILD% -b qthelp %ALLSPHINXOPTS% %BUILDDIR%/qthelp
echo.
echo.Build finished; now you can run "qcollectiongenerator" with the ^
.qhcp project file in %BUILDDIR%/qthelp, like this:
echo.^> qcollectiongenerator %BUILDDIR%\qthelp\MuigitheMicroplumber.qhcp
echo.To view the help file:
echo.^> assistant -collectionFile %BUILDDIR%\qthelp\MuigitheMicroplumber.ghc
goto end
)
if "%1" == "devhelp" (
%SPHINXBUILD% -b devhelp %ALLSPHINXOPTS% %BUILDDIR%/devhelp
echo.
echo.Build finished.
goto end
)
if "%1" == "epub" (
%SPHINXBUILD% -b epub %ALLSPHINXOPTS% %BUILDDIR%/epub
echo.
echo.Build finished. The epub file is in %BUILDDIR%/epub.
goto end
)
if "%1" == "latex" (
%SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex
echo.
echo.Build finished; the LaTeX files are in %BUILDDIR%/latex.
goto end
)
if "%1" == "text" (
%SPHINXBUILD% -b text %ALLSPHINXOPTS% %BUILDDIR%/text
echo.
echo.Build finished. The text files are in %BUILDDIR%/text.
goto end
)
if "%1" == "man" (
%SPHINXBUILD% -b man %ALLSPHINXOPTS% %BUILDDIR%/man
echo.
echo.Build finished. The manual pages are in %BUILDDIR%/man.
goto end
)
if "%1" == "changes" (
%SPHINXBUILD% -b changes %ALLSPHINXOPTS% %BUILDDIR%/changes
echo.
echo.The overview file is in %BUILDDIR%/changes.
goto end
)
if "%1" == "linkcheck" (
%SPHINXBUILD% -b linkcheck %ALLSPHINXOPTS% %BUILDDIR%/linkcheck
echo.
echo.Link check complete; look for any errors in the above output ^
or in %BUILDDIR%/linkcheck/output.txt.
goto end
)
if "%1" == "doctest" (
%SPHINXBUILD% -b doctest %ALLSPHINXOPTS% %BUILDDIR%/doctest
echo.
echo.Testing of doctests in the sources finished, look at the ^
results in %BUILDDIR%/doctest/output.txt.
goto end
)
:end
| douglas-watson/muigi | docs/make.bat | bat | gpl-3.0 | 4,134 |
@ECHO OFF
::
:: set_netFx20.bat --
::
:: Written by Joe Mistachkin.
:: Released to the public domain, use at your own risk!
::
IF NOT DEFINED ISNETFX2 (
SET ISNETFX2=True
)
IF NOT DEFINED VCRUNTIME (
SET VCRUNTIME=2005_SP1_MFC
)
IF NOT DEFINED CONFIGURATION (
SET CONFIGURATION=Release
)
IF NOT DEFINED PLATFORM (
SET PLATFORM=Win32
)
IF NOT DEFINED PROCESSOR (
SET PROCESSOR=x86
)
IF NOT DEFINED YEAR (
SET YEAR=2005
)
IF NOT DEFINED FRAMEWORK (
SET FRAMEWORK=netFx20
)
:end_of_file
| rohitlodha/DenverDB | ado/Setup/set_netFx20.bat | bat | agpl-3.0 | 507 |
@echo off
jolie %JOLIE_HOME%\tools\jolier.ol %* | jolie/jolie | launchers/windows/jolier.bat | bat | lgpl-2.1 | 47 |
make html
PAUSE | Shynixn/BlockBall | docs/GenerateHTML.bat | bat | apache-2.0 | 15 |
set MYDIR=%~dp0
%MYDIR%..\bin\xdebug.bat %MYDIR%build.js %*
| ashumeow/pcaphar | src/third_party/harviewer/requirejs/build/buildebug.bat | bat | apache-2.0 | 60 |
@echo off
start "alias - C:\Program Files\Skype\Phone\Skype.exe" "C:\Program Files (x86)\Skype\Phone\Skype.exe" %*
| greenlaw110/winenv | alias/skype.bat | bat | bsd-2-clause | 124 |
@ECHO OFF
REM Command file for Sphinx documentation
if "%SPHINXBUILD%" == "" (
set SPHINXBUILD=sphinx-build
)
set BUILDDIR=_build
set ALLSPHINXOPTS=-d %BUILDDIR%/doctrees %SPHINXOPTS% .
if NOT "%PAPER%" == "" (
set ALLSPHINXOPTS=-D latex_paper_size=%PAPER% %ALLSPHINXOPTS%
)
if "%1" == "" goto help
if "%1" == "help" (
:help
echo.Please use `make ^<target^>` where ^<target^> is one of
echo. html to make standalone HTML files
echo. dirhtml to make HTML files named index.html in directories
echo. singlehtml to make a single large HTML file
echo. pickle to make pickle files
echo. json to make JSON files
echo. htmlhelp to make HTML files and a HTML help project
echo. qthelp to make HTML files and a qthelp project
echo. devhelp to make HTML files and a Devhelp project
echo. epub to make an epub
echo. latex to make LaTeX files, you can set PAPER=a4 or PAPER=letter
echo. text to make text files
echo. man to make manual pages
echo. changes to make an overview over all changed/added/deprecated items
echo. linkcheck to check all external links for integrity
echo. doctest to run all doctests embedded in the documentation if enabled
goto end
)
if "%1" == "clean" (
for /d %%i in (%BUILDDIR%\*) do rmdir /q /s %%i
del /q /s %BUILDDIR%\*
goto end
)
if "%1" == "html" (
%SPHINXBUILD% -b html %ALLSPHINXOPTS% %BUILDDIR%/html
if errorlevel 1 exit /b 1
echo.
echo.Build finished. The HTML pages are in %BUILDDIR%/html.
goto end
)
if "%1" == "dirhtml" (
%SPHINXBUILD% -b dirhtml %ALLSPHINXOPTS% %BUILDDIR%/dirhtml
if errorlevel 1 exit /b 1
echo.
echo.Build finished. The HTML pages are in %BUILDDIR%/dirhtml.
goto end
)
if "%1" == "singlehtml" (
%SPHINXBUILD% -b singlehtml %ALLSPHINXOPTS% %BUILDDIR%/singlehtml
if errorlevel 1 exit /b 1
echo.
echo.Build finished. The HTML pages are in %BUILDDIR%/singlehtml.
goto end
)
if "%1" == "pickle" (
%SPHINXBUILD% -b pickle %ALLSPHINXOPTS% %BUILDDIR%/pickle
if errorlevel 1 exit /b 1
echo.
echo.Build finished; now you can process the pickle files.
goto end
)
if "%1" == "json" (
%SPHINXBUILD% -b json %ALLSPHINXOPTS% %BUILDDIR%/json
if errorlevel 1 exit /b 1
echo.
echo.Build finished; now you can process the JSON files.
goto end
)
if "%1" == "htmlhelp" (
%SPHINXBUILD% -b htmlhelp %ALLSPHINXOPTS% %BUILDDIR%/htmlhelp
if errorlevel 1 exit /b 1
echo.
echo.Build finished; now you can run HTML Help Workshop with the ^
.hhp project file in %BUILDDIR%/htmlhelp.
goto end
)
if "%1" == "qthelp" (
%SPHINXBUILD% -b qthelp %ALLSPHINXOPTS% %BUILDDIR%/qthelp
if errorlevel 1 exit /b 1
echo.
echo.Build finished; now you can run "qcollectiongenerator" with the ^
.qhcp project file in %BUILDDIR%/qthelp, like this:
echo.^> qcollectiongenerator %BUILDDIR%\qthelp\Flask-DBXML.qhcp
echo.To view the help file:
echo.^> assistant -collectionFile %BUILDDIR%\qthelp\Flask-DBXML.ghc
goto end
)
if "%1" == "devhelp" (
%SPHINXBUILD% -b devhelp %ALLSPHINXOPTS% %BUILDDIR%/devhelp
if errorlevel 1 exit /b 1
echo.
echo.Build finished.
goto end
)
if "%1" == "epub" (
%SPHINXBUILD% -b epub %ALLSPHINXOPTS% %BUILDDIR%/epub
if errorlevel 1 exit /b 1
echo.
echo.Build finished. The epub file is in %BUILDDIR%/epub.
goto end
)
if "%1" == "latex" (
%SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex
if errorlevel 1 exit /b 1
echo.
echo.Build finished; the LaTeX files are in %BUILDDIR%/latex.
goto end
)
if "%1" == "text" (
%SPHINXBUILD% -b text %ALLSPHINXOPTS% %BUILDDIR%/text
if errorlevel 1 exit /b 1
echo.
echo.Build finished. The text files are in %BUILDDIR%/text.
goto end
)
if "%1" == "man" (
%SPHINXBUILD% -b man %ALLSPHINXOPTS% %BUILDDIR%/man
if errorlevel 1 exit /b 1
echo.
echo.Build finished. The manual pages are in %BUILDDIR%/man.
goto end
)
if "%1" == "changes" (
%SPHINXBUILD% -b changes %ALLSPHINXOPTS% %BUILDDIR%/changes
if errorlevel 1 exit /b 1
echo.
echo.The overview file is in %BUILDDIR%/changes.
goto end
)
if "%1" == "linkcheck" (
%SPHINXBUILD% -b linkcheck %ALLSPHINXOPTS% %BUILDDIR%/linkcheck
if errorlevel 1 exit /b 1
echo.
echo.Link check complete; look for any errors in the above output ^
or in %BUILDDIR%/linkcheck/output.txt.
goto end
)
if "%1" == "doctest" (
%SPHINXBUILD% -b doctest %ALLSPHINXOPTS% %BUILDDIR%/doctest
if errorlevel 1 exit /b 1
echo.
echo.Testing of doctests in the sources finished, look at the ^
results in %BUILDDIR%/doctest/output.txt.
goto end
)
:end
| julen/flask-dbxml | docs/make.bat | bat | bsd-3-clause | 4,521 |
REM Run CodeXLGPUDebugTest.exe
REM
REM Usage:
REM set WORKSPACE=<workspace-root-path>
REM CAITRunHSAWinTests.bat
REM
REM Assumes AMD_CodeXL_Win_<version>.exe and AutomaticTester-<version>.zip
REM have already been copied into <workspace-root-path>
setlocal EnableDelayedExpansion
cd %WORKSPACE%
REM unzip test kit
for /F %%f in ('dir /B AutomaticTester-*.zip') do %WORKSPACE%\main\Common\DK\Gnu\cw1.3.12\bin\unzip -q -o -d %WORKSPACE% %%f
REM edit files with correct directory paths
REM
cd AutomaticTester
mkdir TestResults
mkdir TestTemp
set TEMP=%WORKSPACE%\AutomaticTester\TestTemp
ReplaceGoldMasterPath.py --xmlFiles=*_StepTest.xml --GoldPath=HSAGoldMasters_APPSDK_2_9 --LogPath=TestResults
REM Install CodeXL
REM
cd %WORKSPACE%
for /F %%f in ('dir /B AMD_CodeXL_Win_*.exe') do %%f /i /passive /lva %WORKSPACE%\%%f_install.log
REM Run CodeXL Debugging tests
REM 32bit Release builds
REM Only running passing tests. Commented out tests fail
REM
cd AutomaticTester
REM FB10253 CodeXLGpuDebuggingTest BitonicSort_StepTest.xml --gtest_output="xml:BitonicSort_StepTest_Results.xml"
REM FB10517 CodeXLGpuDebuggingTest SobelFilter_StepTest.xml --gtest_output="xml:SobelFilter_StepTest_Results.xml"
CodeXLGpuDebuggingTest BinarySearch_StepTest.xml --gtest_output="xml:BinarySearch_StepTest_Results.xml"
REM FB10445 CodeXLGpuDebuggingTest BlackScholes_StepTest.xml --gtest_output="xml:BlackScholes_StepTest_Results.xml"
CodeXLGpuDebuggingTest URNG_StepTest.xml --gtest_output="xml:URNG_StepTest_Results.xml"
REM FB10535 CodeXLGpuDebuggingTest MatrixTranspose_StepTest.xml --gtest_output="xml:MatrixTranspose_StepTest_Results.xml"
REM FB10525 CodeXLGpuDebuggingTest MonteCarloAsian_StepTest.xml --gtest_output="xml:MonteCarloAsian_StepTest_Results.xml"
CodeXLGpuDebuggingTest MatrixMultiplication_StepTest.xml --gtest_output="xml:MatrixMultiplication_StepTest_Results.xml"
REM FB10533 CodeXLGpuDebuggingTest NBody_StepTest.xml --gtest_output="xml:NBody_StepTest_Results.xml"
REM FB10517 CodeXLGpuDebuggingTest BlackScholesDP_StepTest.xml --gtest_output="xml:BlackScholesDP_StepTest_Results.xml"
REM FB10452,10482 CodeXLGpuDebuggingTest MonteCarloAsianDP_StepTest.xml --gtest_output="xml:MonteCarloAsianDP_StepTest_Results.xml"
REM FB10483 CodeXLGpuDebuggingTest SimpleGL_StepTest.xml --gtest_output="xml:SimpleGL_StepTest_Results.xml"
REM App doesn't run yet CodeXLGpuDebuggingTest AtomicCounters_StepTest.xml --gtest_output="xml:AtomicCounters_StepTest_Results.xml"
REM FB10484,10485 CodeXLGpuDebuggingTest KmeansAutoclustering_StepTest.xml --gtest_output="xml:KmeansAutoclustering_StepTest_Results.xml"
REM App doesn't run yet CodeXLGpuDebuggingTest StringSearch_StepTest.xml --gtest_output="xml:StringSearch_StepTest_Results.xml"
exit /b %ERRORLEVEL% | ilangal-amd/CodeXL | CodeXL/Components/GpuDebugging/AMDTAutomaticTester/CAITRunHSAWinTests.bat | bat | mit | 2,768 |
@echo off
pushd %~dp0
"%VS120COMNTOOLS%..\IDE\mstest" /test:Microsoft.Protocols.TestSuites.MS_OXCFXICS.S06_SyncICSContentsFAI_TestSuite.MSOXCFXICS_S06_SyncICSContentsFAI_TestSuite1 /testcontainer:..\..\MS-OXCFXICS\TestSuite\bin\Debug\MS-OXCFXICS_TestSuite.dll /runconfig:..\..\MS-OXCFXICS\MS-OXCFXICS.testsettings /unique
pause | XinwLi/Interop-TestSuites-1 | ExchangeMAPI/Source/Scripts/MS-OXCFXICS/RunMSOXCFXICS_S06_SyncICSContentsFAI_TestSuite1.cmd | bat | mit | 327 |
@echo off
setlocal
REM Copyright 2006-2010 Amazon.com, Inc. or its affiliates. All Rights Reserved. Licensed under the
REM Amazon Software License (the "License"). You may not use this file except in compliance with the License. A copy of the
REM License is located at http://aws.amazon.com/asl or in the "license" file accompanying this file. This file is distributed on an "AS
REM IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific
REM language governing permissions and limitations under the License.
REM Set intermediate env vars because the %VAR:x=y% notation below
REM (which replaces the string x with the string y in VAR)
REM doesn't handle undefined environment variables. This way
REM we're always dealing with defined variables in those tests.
set CHK_HOME=_%EC2_HOME%
if %CHK_HOME% == "_" goto HOME_MISSING
"%EC2_HOME:"=%\bin\ec2-cmd" DetachInternetGateway %*
goto DONE
:HOME_MISSING
echo EC2_HOME is not set
exit /b 1
:DONE
| sujoyg/tool | vendor/ec2-api-tools-1.4.2.2/bin/ec2detigw.cmd | bat | mit | 1,038 |
REM not a real batch file
REM just a placeholder for testing type=file in a product extension | OpenLiberty/open-liberty | dev/com.ibm.ws.kernel.feature_fat/publish/files/test.bat | bat | epl-1.0 | 93 |
cmd_fs/notify/inotify/built-in.o := /home/friedrich420/kernel/Toolchain/arm-eabi-4.7/bin/arm-eabi-ld -EL -r -o fs/notify/inotify/built-in.o fs/notify/inotify/inotify_fsnotify.o fs/notify/inotify/inotify_user.o
| friedrich420/S4-GPE-AEL-Kernel-4.4.3 | fs/notify/inotify/.built-in.o.cmd | bat | gpl-2.0 | 215 |
@ECHO OFF
REM Command file for Sphinx documentation
if "%SPHINXBUILD%" == "" (
set SPHINXBUILD=sphinx-build
)
set BUILDDIR=_build
set ALLSPHINXOPTS=-d %BUILDDIR%/doctrees %SPHINXOPTS% .
set I18NSPHINXOPTS=%SPHINXOPTS% .
if NOT "%PAPER%" == "" (
set ALLSPHINXOPTS=-D latex_paper_size=%PAPER% %ALLSPHINXOPTS%
set I18NSPHINXOPTS=-D latex_paper_size=%PAPER% %I18NSPHINXOPTS%
)
if "%1" == "" goto help
if "%1" == "help" (
:help
echo.Please use `make ^<target^>` where ^<target^> is one of
echo. html to make standalone HTML files
echo. dirhtml to make HTML files named index.html in directories
echo. singlehtml to make a single large HTML file
echo. pickle to make pickle files
echo. json to make JSON files
echo. htmlhelp to make HTML files and a HTML help project
echo. qthelp to make HTML files and a qthelp project
echo. devhelp to make HTML files and a Devhelp project
echo. epub to make an epub
echo. latex to make LaTeX files, you can set PAPER=a4 or PAPER=letter
echo. text to make text files
echo. man to make manual pages
echo. texinfo to make Texinfo files
echo. gettext to make PO message catalogs
echo. changes to make an overview over all changed/added/deprecated items
echo. xml to make Docutils-native XML files
echo. pseudoxml to make pseudoxml-XML files for display purposes
echo. linkcheck to check all external links for integrity
echo. doctest to run all doctests embedded in the documentation if enabled
echo. coverage to run coverage check of the documentation if enabled
goto end
)
if "%1" == "clean" (
for /d %%i in (%BUILDDIR%\*) do rmdir /q /s %%i
del /q /s %BUILDDIR%\*
goto end
)
REM Check if sphinx-build is available and fallback to Python version if any
%SPHINXBUILD% 2> nul
if errorlevel 9009 goto sphinx_python
goto sphinx_ok
:sphinx_python
set SPHINXBUILD=python -m sphinx.__init__
%SPHINXBUILD% 2> nul
if errorlevel 9009 (
echo.
echo.The 'sphinx-build' command was not found. Make sure you have Sphinx
echo.installed, then set the SPHINXBUILD environment variable to point
echo.to the full path of the 'sphinx-build' executable. Alternatively you
echo.may add the Sphinx directory to PATH.
echo.
echo.If you don't have Sphinx installed, grab it from
echo.http://sphinx-doc.org/
exit /b 1
)
:sphinx_ok
if "%1" == "html" (
%SPHINXBUILD% -b html %ALLSPHINXOPTS% %BUILDDIR%/html
if errorlevel 1 exit /b 1
echo.
echo.Build finished. The HTML pages are in %BUILDDIR%/html.
goto end
)
if "%1" == "dirhtml" (
%SPHINXBUILD% -b dirhtml %ALLSPHINXOPTS% %BUILDDIR%/dirhtml
if errorlevel 1 exit /b 1
echo.
echo.Build finished. The HTML pages are in %BUILDDIR%/dirhtml.
goto end
)
if "%1" == "singlehtml" (
%SPHINXBUILD% -b singlehtml %ALLSPHINXOPTS% %BUILDDIR%/singlehtml
if errorlevel 1 exit /b 1
echo.
echo.Build finished. The HTML pages are in %BUILDDIR%/singlehtml.
goto end
)
if "%1" == "pickle" (
%SPHINXBUILD% -b pickle %ALLSPHINXOPTS% %BUILDDIR%/pickle
if errorlevel 1 exit /b 1
echo.
echo.Build finished; now you can process the pickle files.
goto end
)
if "%1" == "json" (
%SPHINXBUILD% -b json %ALLSPHINXOPTS% %BUILDDIR%/json
if errorlevel 1 exit /b 1
echo.
echo.Build finished; now you can process the JSON files.
goto end
)
if "%1" == "htmlhelp" (
%SPHINXBUILD% -b htmlhelp %ALLSPHINXOPTS% %BUILDDIR%/htmlhelp
if errorlevel 1 exit /b 1
echo.
echo.Build finished; now you can run HTML Help Workshop with the ^
.hhp project file in %BUILDDIR%/htmlhelp.
goto end
)
if "%1" == "qthelp" (
%SPHINXBUILD% -b qthelp %ALLSPHINXOPTS% %BUILDDIR%/qthelp
if errorlevel 1 exit /b 1
echo.
echo.Build finished; now you can run "qcollectiongenerator" with the ^
.qhcp project file in %BUILDDIR%/qthelp, like this:
echo.^> qcollectiongenerator %BUILDDIR%\qthelp\ckan-docker.qhcp
echo.To view the help file:
echo.^> assistant -collectionFile %BUILDDIR%\qthelp\ckan-docker.ghc
goto end
)
if "%1" == "devhelp" (
%SPHINXBUILD% -b devhelp %ALLSPHINXOPTS% %BUILDDIR%/devhelp
if errorlevel 1 exit /b 1
echo.
echo.Build finished.
goto end
)
if "%1" == "epub" (
%SPHINXBUILD% -b epub %ALLSPHINXOPTS% %BUILDDIR%/epub
if errorlevel 1 exit /b 1
echo.
echo.Build finished. The epub file is in %BUILDDIR%/epub.
goto end
)
if "%1" == "latex" (
%SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex
if errorlevel 1 exit /b 1
echo.
echo.Build finished; the LaTeX files are in %BUILDDIR%/latex.
goto end
)
if "%1" == "latexpdf" (
%SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex
cd %BUILDDIR%/latex
make all-pdf
cd %~dp0
echo.
echo.Build finished; the PDF files are in %BUILDDIR%/latex.
goto end
)
if "%1" == "latexpdfja" (
%SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex
cd %BUILDDIR%/latex
make all-pdf-ja
cd %~dp0
echo.
echo.Build finished; the PDF files are in %BUILDDIR%/latex.
goto end
)
if "%1" == "text" (
%SPHINXBUILD% -b text %ALLSPHINXOPTS% %BUILDDIR%/text
if errorlevel 1 exit /b 1
echo.
echo.Build finished. The text files are in %BUILDDIR%/text.
goto end
)
if "%1" == "man" (
%SPHINXBUILD% -b man %ALLSPHINXOPTS% %BUILDDIR%/man
if errorlevel 1 exit /b 1
echo.
echo.Build finished. The manual pages are in %BUILDDIR%/man.
goto end
)
if "%1" == "texinfo" (
%SPHINXBUILD% -b texinfo %ALLSPHINXOPTS% %BUILDDIR%/texinfo
if errorlevel 1 exit /b 1
echo.
echo.Build finished. The Texinfo files are in %BUILDDIR%/texinfo.
goto end
)
if "%1" == "gettext" (
%SPHINXBUILD% -b gettext %I18NSPHINXOPTS% %BUILDDIR%/locale
if errorlevel 1 exit /b 1
echo.
echo.Build finished. The message catalogs are in %BUILDDIR%/locale.
goto end
)
if "%1" == "changes" (
%SPHINXBUILD% -b changes %ALLSPHINXOPTS% %BUILDDIR%/changes
if errorlevel 1 exit /b 1
echo.
echo.The overview file is in %BUILDDIR%/changes.
goto end
)
if "%1" == "linkcheck" (
%SPHINXBUILD% -b linkcheck %ALLSPHINXOPTS% %BUILDDIR%/linkcheck
if errorlevel 1 exit /b 1
echo.
echo.Link check complete; look for any errors in the above output ^
or in %BUILDDIR%/linkcheck/output.txt.
goto end
)
if "%1" == "doctest" (
%SPHINXBUILD% -b doctest %ALLSPHINXOPTS% %BUILDDIR%/doctest
if errorlevel 1 exit /b 1
echo.
echo.Testing of doctests in the sources finished, look at the ^
results in %BUILDDIR%/doctest/output.txt.
goto end
)
if "%1" == "coverage" (
%SPHINXBUILD% -b coverage %ALLSPHINXOPTS% %BUILDDIR%/coverage
if errorlevel 1 exit /b 1
echo.
echo.Testing of coverage in the sources finished, look at the ^
results in %BUILDDIR%/coverage/python.txt.
goto end
)
if "%1" == "xml" (
%SPHINXBUILD% -b xml %ALLSPHINXOPTS% %BUILDDIR%/xml
if errorlevel 1 exit /b 1
echo.
echo.Build finished. The XML files are in %BUILDDIR%/xml.
goto end
)
if "%1" == "pseudoxml" (
%SPHINXBUILD% -b pseudoxml %ALLSPHINXOPTS% %BUILDDIR%/pseudoxml
if errorlevel 1 exit /b 1
echo.
echo.Build finished. The pseudo-XML files are in %BUILDDIR%/pseudoxml.
goto end
)
:end
| farrcommons/farrcommons-docker | doc/make.bat | bat | gpl-3.0 | 7,254 |
gcbdoc gcbasic chm
| Anobium/Great-Cow-BASIC-Help | source_DE/chm.bat | bat | gpl-3.0 | 20 |
@echo OFF
argumenttester.jar %*
| ksmonkey123/WaDosUtil | misc/judos/drop files onto jar-file/run jar and pass parameter.bat | bat | gpl-3.0 | 32 |
@echo off
cd %APPVEYOR_BUILD_FOLDER%
:: =========================================================
:: Set some defaults. Infer some variables.
::
:: These are set globally
if not "%LUA_VER%"=="" (
set LUA=lua
set LUA_SHORTV=%LUA_VER:~0,3%
) else if not "%LJ_VER%"=="" (
set LUA=luajit
set LJ_SHORTV=%LJ_VER:~0,3%
set LUA_SHORTV=5.1
) else (
echo Can not recognize needed Lua version
echo Please set LUA_VER or LJ_VER
exit /B 3
)
:: Now we declare a scope
Setlocal EnableDelayedExpansion EnableExtensions
set LUAROCKS_SHORTV=%LUAROCKS_VER:~0,3%
if not defined LUAROCKS_URL set LUAROCKS_URL=http://keplerproject.github.io/luarocks/releases
if not defined LUAROCKS_REPO set LUAROCKS_REPO=http://rocks.moonscript.org
if not defined LUA_URL set LUA_URL=http://www.lua.org/ftp
if not defined LUAJIT_GIT_REPO set LUAJIT_GIT_REPO=http://luajit.org/git/luajit-2.0.git
if not defined LUAJIT_URL set LUAJIT_URL=http://luajit.org/download
if not defined LR_EXTERNAL set LR_EXTERNAL=c:\external
if not defined LUAROCKS_INSTALL set LUAROCKS_INSTALL=%ProgramFiles(x86)%\LuaRocks
if not defined LR_ROOT set LR_ROOT=%LUAROCKS_INSTALL%\%LUAROCKS_SHORTV%
if not defined LR_SYSTREE set LR_SYSTREE=%LUAROCKS_INSTALL%\systree
if /I "%platform%"=="x64" set LR_SYSTREE=%ProgramFiles%\LuaRocks\systree
if not defined SEVENZIP set SEVENZIP=7z
::
:: =========================================================
:: first create some necessary directories:
mkdir downloads 2>NUL
:: defines LUA_DIR so Cmake can find this Lua install
if "%LUA%"=="luajit" (
set LUA_DIR=c:\lua\lj%LJ_SHORTV%
) else (
set LUA_DIR=c:\lua\%LUA_VER%
)
:: Download and compile Lua (or LuaJIT)
if "%LUA%"=="luajit" (
if not exist %LUA_DIR% (
if "%LJ_SHORTV%"=="2.1" (
:: Clone repository and checkout 2.1 branch
set lj_source_folder=%APPVEYOR_BUILD_FOLDER%\downloads\luajit-%LJ_VER%
if not exist !lj_source_folder! (
echo Cloning git repo %LUAJIT_GIT_REPO% !lj_source_folder!
git clone %LUAJIT_GIT_REPO% !lj_source_folder! || call :die "Failed to clone repository"
)
cd !lj_source_folder!\src
git checkout v2.1 || call :die
) else (
set lj_source_folder=%APPVEYOR_BUILD_FOLDER%\downloads\luajit-%LJ_VER%
if not exist !lj_source_folder! (
echo Downloading... %LUAJIT_URL%/LuaJIT-%LJ_VER%.tar.gz
curl --silent --fail --max-time 120 --connect-timeout 30 %LUAJIT_URL%/LuaJIT-%LJ_VER%.tar.gz | %SEVENZIP% x -si -so -tgzip | %SEVENZIP% x -si -ttar -aoa -odownloads
)
cd !lj_source_folder!\src
)
:: Compiles LuaJIT
call msvcbuild.bat
mkdir %LUA_DIR% 2> NUL
for %%a in (bin include lib) do ( mkdir "%LUA_DIR%\%%a" )
for %%a in (luajit.exe lua51.dll) do ( move "!lj_source_folder!\src\%%a" "%LUA_DIR%\bin" )
move "!lj_source_folder!\src\lua51.lib" "%LUA_DIR%\lib"
for %%a in (lauxlib.h lua.h lua.hpp luaconf.h lualib.h luajit.h) do (
copy "!lj_source_folder!\src\%%a" "%LUA_DIR%\include"
)
) else (
echo LuaJIT %LJ_VER% already installed at %LUA_DIR%
)
) else (
if not exist %LUA_DIR% (
:: Download and compile Lua
if not exist downloads\lua-%LUA_VER% (
curl --silent --fail --max-time 120 --connect-timeout 30 %LUA_URL%/lua-%LUA_VER%.tar.gz | %SEVENZIP% x -si -so -tgzip | %SEVENZIP% x -si -ttar -aoa -odownloads
)
mkdir downloads\lua-%LUA_VER%\etc 2> NUL
if not exist downloads\lua-%LUA_VER%\etc\winmake.bat (
curl --silent --location --insecure --fail --max-time 120 --connect-timeout 30 https://github.com/Tieske/luawinmake/archive/master.tar.gz | %SEVENZIP% x -si -so -tgzip | %SEVENZIP% e -si -ttar -aoa -odownloads\lua-%LUA_VER%\etc luawinmake-master\etc\winmake.bat
)
cd downloads\lua-%LUA_VER%
call etc\winmake
call etc\winmake install %LUA_DIR%
) else (
echo Lua %LUA_VER% already installed at %LUA_DIR%
)
)
if not exist %LUA_DIR%\bin\%LUA%.exe (
echo Missing Lua interpreter
exit /B 1
)
set PATH=%LUA_DIR%\bin;%PATH%
call %LUA% -v
:: =========================================================
:: LuaRocks
:: =========================================================
if not exist "%LR_ROOT%" (
:: Downloads and installs LuaRocks
cd %APPVEYOR_BUILD_FOLDER%
if not exist downloads\luarocks-%LUAROCKS_VER%-win32.zip (
echo Downloading LuaRocks...
curl --silent --fail --max-time 120 --connect-timeout 30 --output downloads\luarocks-%LUAROCKS_VER%-win32.zip %LUAROCKS_URL%/luarocks-%LUAROCKS_VER%-win32.zip
%SEVENZIP% x -aoa -odownloads downloads\luarocks-%LUAROCKS_VER%-win32.zip
)
cd downloads\luarocks-%LUAROCKS_VER%-win32
call install.bat /LUA %LUA_DIR% /Q /LV %LUA_SHORTV% /P "%LUAROCKS_INSTALL%"
)
if not exist "%LR_ROOT%" (
echo LuaRocks installation failed.
exit /B 2
)
set PATH=%LR_ROOT%;%LR_SYSTREE%\bin;%PATH%
:: Lua will use just the system rocks
set LUA_PATH=%LR_ROOT%\lua\?.lua;%LR_ROOT%\lua\?\init.lua
set LUA_PATH=%LUA_PATH%;.\?.lua;
set LUA_PATH=%LUA_PATH%;%LR_SYSTREE%\share\lua\%LUA_SHORTV%\?.lua
set LUA_PATH=%LUA_PATH%;%LR_SYSTREE%\share\lua\%LUA_SHORTV%\?\init.lua
set LUA_CPATH=%LR_SYSTREE%\lib\lua\%LUA_SHORTV%\?.dll
call luarocks --version || call :die "Error with LuaRocks installation"
call luarocks list
if not exist "%LR_EXTERNAL%" (
mkdir "%LR_EXTERNAL%"
mkdir "%LR_EXTERNAL%\lib"
mkdir "%LR_EXTERNAL%\include"
)
set PATH=%LR_EXTERNAL%;%PATH%
:: Exports the following variables:
:: (beware of whitespace between & and ^ below)
endlocal & set PATH=%PATH%&^
set LUA_DIR=%LUA_DIR%&^
set LR_SYSTREE=%LR_SYSTREE%&^
set LUA_PATH=%LUA_PATH%&^
set LUA_CPATH=%LUA_CPATH%&^
set LR_EXTERNAL=%LR_EXTERNAL%
echo ======================================================
if "%LUA%"=="luajit" (
echo Installation of LuaJIT %LJ_VER% and LuaRocks %LUAROCKS_VER% done.
) else (
echo Installation of Lua %LUA_VER% and LuaRocks %LUAROCKS_VER% done.
)
echo Platform - %platform%
echo LUA - %LUA%
echo LUA_SHORTV - %LUA_SHORTV%
echo LJ_SHORTV - %LJ_SHORTV%
echo LUA_PATH - %LUA_PATH%
echo LUA_CPATH - %LUA_CPATH%
echo
echo LR_EXTERNAL - %LR_EXTERNAL%
echo ======================================================
goto :eof
:: This blank space is intentional. If you see errors like "The system cannot find the batch label specified 'foo'"
:: then try adding or removing blank lines lines above.
:: Yes, really.
:: http://stackoverflow.com/questions/232651/why-the-system-cannot-find-the-batch-label-specified-is-thrown-even-if-label-e
:: helper functions:
:: for bailing out when an error occurred
:die %1
echo %1
exit 1
goto :eof
| Lua-cURL/Lua-cURLv3 | .appveyor/install.bat | bat | mit | 6,733 |
@IF EXIST "%~dp0\node.exe" (
"%~dp0\node.exe" "%~dp0\..\..\..\handlebars\bin\handlebars" %*
) ELSE (
@SETLOCAL
@SET PATHEXT=%PATHEXT:;.JS;=;%
node "%~dp0\..\..\..\handlebars\bin\handlebars" %*
) | SpatialMap/SpatialMapDev | node_modules/node-plop/node_modules/.bin/handlebars.cmd | bat | mit | 204 |
@echo off
copy ..\x64\release\obs.exe .\
copy ..\obsapi\x64\release\obsapi.dll .\
copy ..\dshowplugin\x64\release\dshowplugin.dll .\plugins
copy ..\graphicscapture\x64\release\graphicscapture.dll .\plugins
copy ..\graphicscapture\graphicscapturehook\release\graphicscapturehook.dll .\plugins\graphicscapture
copy ..\graphicscapture\graphicscapturehook\x64\release\graphicscapturehook64.dll .\plugins\graphicscapture
copy ..\noisegate\x64\release\noisegate.dll .\plugins
copy ..\psvplugin\x64\release\psvplugin.dll .\plugins
copy ..\x264\libs\64bit\libx264-140.dll .\
copy ..\injectHelper\Release\injectHelper.exe .\plugins\graphicscapture
copy ..\injectHelper\x64\Release\injectHelper64.exe .\plugins\graphicscapture
| ginshali/OBS | rundir/copyrelease64.bat | bat | gpl-2.0 | 717 |
::============================================================================
:: Batch file to load the Blinky program to the flash of EK-TM4C123GXL
:: (equivalent to EK-LM4F120XL)
::
:: NOTE: requires the LMFlash programmer from Texas Instruments, see:
:: http://www.ti.com/tool/LMFLASHPROGRAMMER
::
@echo off
setlocal
@echo Load the program to the flash of EK-TM4C123GXL
@echo usage: flash
@echo usage: flash rel
@echo usage: flash spy
::----------------------------------------------------------------------------
:: NOTE: Adjust the following symbol to the location of the
:: LMFlash utility on your machine
::
set LMFLASH=C:\tools\TI\LM_Flash_Programmer\LMFlash.exe
:: set the build directory depending on the first parameter %1
set BUILD_DIR=dbg
if [%1] NEQ [] set BUILD_DIR=%1
@echo on
%LMFLASH% -q ek-tm4c123gxl %BUILD_DIR%\blinky-qv.bin
@echo.
@echo.
@echo Reset the target to start running your program!
@echo off
endlocal | hyller/GladiatorCots | QP/v5.4.2/qpn/examples/arm-cm/blinky_ek-tm4c123gxl/qv/gnu/flash.bat | bat | unlicense | 975 |
::
:: Copyright (c) 2008-2017 the Urho3D project.
::
:: Permission is hereby granted, free of charge, to any person obtaining a copy
:: of this software and associated documentation files (the "Software"), to deal
:: in the Software without restriction, including without limitation the rights
:: to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
:: copies of the Software, and to permit persons to whom the Software is
:: furnished to do so, subject to the following conditions:
::
:: The above copyright notice and this permission notice shall be included in
:: all copies or substantial portions of the Software.
::
:: THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
:: IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
:: FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
:: AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
:: LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
:: OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
:: THE SOFTWARE.
::
@echo off
:: Determine source tree and build tree
setlocal
set "SOURCE=%~dp0"
set "SOURCE=%SOURCE:~0,-1%"
set "BUILD="
if "%~1" == "" goto :continue
set "ARG1=%~1"
if "%ARG1:~0,1%" equ "-" goto :continue
set "BUILD=%~1"
shift
:continue
if "%BUILD%" == "" if exist "%cd%\CMakeCache.txt" (set "BUILD=%cd%") else (echo Usage: %~nx0 \path\to\build-tree [build-options] && exit /B 1)
:: Detect CMake toolchains directory if it is not provided explicitly
if "%TOOLCHAINS%" == "" set "TOOLCHAINS=%SOURCE%\CMake\Toolchains"
if not exist "%TOOLCHAINS%" if exist "%URHO3D_HOME%\share\CMake\Toolchains" set "TOOLCHAINS=%URHO3D_HOME%\share\CMake\Toolchains"
:: Default to native generator and toolchain if none is specified explicitly
set "OPTS="
set "BUILD_OPTS="
set "arch="
:loop
if not "%~1" == "" (
if "%~1" == "-DANDROID" if "%~2" == "1" set "OPTS=-G "Unix Makefiles" -DCMAKE_TOOLCHAIN_FILE="%TOOLCHAINS%\Android.cmake""
if "%~1" == "-DWEB" if "%~2" == "1" set "OPTS=-G "MinGW Makefiles" -DCMAKE_TOOLCHAIN_FILE="%TOOLCHAINS%\Emscripten.cmake""
if "%~1" == "-DMINGW" if "%~2" == "1" set "OPTS=-G "MinGW Makefiles""
if "%~1" == "-DURHO3D_64BIT" if "%~2" == "1" set "arch= Win64"
if "%~1" == "-DURHO3D_64BIT" if "%~2" == "0" set "arch="
if "%~1" == "-VS" set "OPTS=-G "Visual Studio %~2%arch%""
if "%~1" == "-G" set "OPTS=%OPTS% %~1 %2"
set "ARG1=%~1"
set "ARG2=%~2"
if "%ARG1:~0,2%" == "-D" set "BUILD_OPTS=%BUILD_OPTS% %ARG1%=%ARG2%"
shift
shift
goto loop
)
if exist "%BUILD%\CMakeCache.txt" set "OPTS="
:: Create project with the chosen CMake generator and toolchain
cmake -E make_directory "%BUILD%" && cmake -E chdir "%BUILD%" cmake %OPTS% %BUILD_OPTS% "%SOURCE%"
| MeshGeometry/Urho3D | cmake_generic.bat | bat | mit | 2,845 |
@echo off
setlocal
setlocal enabledelayedexpansion
call %~dp0..\win32env.bat
if not "%1"=="" goto make
for /f "delims=" %%D in (.subdirs) do @echo %%D && set DIRS=!DIRS! %%D
%0 %DIRS%
:make
set ROOT=%CD%
set DIR=%1& shift
if "%DIR%" == "" goto success
echo Building %DIR%...
cd %DIR%
nmake -nologo install > cbuild.log 2>&1
if not %ERRORLEVEL% == 0 goto fail
cd %ROOT%
goto make
:success
echo Build succeeded.
goto done
:fail
echo Build failed, see %DIR%\cbuild.log for details
:done
cd %ROOT%
| amiramix/serna-free | 3rd/checked_build.bat | bat | gpl-3.0 | 506 |
@echo // Copyright (C) 1996-2015 Markus F.X.J. Oberhumer
@echo //
@echo // DOS 32-bit
@echo // Digital Mars C/C++
@echo //
@call b\prepare.bat
@if "%BECHO%"=="n" echo off
set CC=dmc -mx
set CF=-o -w- %CFI% %CFASM%
set LF=%BLIB% x32.lib
%CC% %CF% -c @b\src.rsp
@if errorlevel 1 goto error
lib %BLIB% /b /c /n /noi @b\win32\bc.rsp
@if errorlevel 1 goto error
%CC% %CF% examples\dict.c %LF%
@if errorlevel 1 goto error
%CC% %CF% examples\lzopack.c %LF%
@if errorlevel 1 goto error
%CC% %CF% examples\precomp.c %LF%
@if errorlevel 1 goto error
%CC% %CF% examples\precomp2.c %LF%
@if errorlevel 1 goto error
%CC% %CF% examples\simple.c %LF%
@if errorlevel 1 goto error
%CC% %CF% lzotest\lzotest.c %LF%
@if errorlevel 1 goto error
set LF=x32.lib
%CC% %CF% -Iinclude\lzo minilzo\testmini.c minilzo\minilzo.c %LF%
@if errorlevel 1 goto error
@call b\done.bat
@goto end
:error
@echo ERROR during build!
:end
@call b\unset.bat
| durd07/4G | vpn/openvpn/lzo-2.09/B/dos32/dm.bat | bat | gpl-2.0 | 972 |
@echo off
rem
rem Copyright (c) 1999-2011 Luca Garulli @www.orientechnologies.com
rem
rem Guess ORIENTDB_HOME if not defined
set CURRENT_DIR=%cd%
if exist "%JAVA_HOME%\bin\java.exe" goto setJavaHome
set JAVA="java"
goto okJava
:setJavaHome
set JAVA="%JAVA_HOME%\bin\java"
:okJava
if not "%ORIENTDB_HOME%" == "" goto gotHome
set ORIENTDB_HOME=%CURRENT_DIR%
if exist "%ORIENTDB_HOME%\bin\console.bat" goto okHome
cd ..
set ORIENTDB_HOME=%cd%
cd %CURRENT_DIR%
:gotHome
if exist "%ORIENTDB_HOME%\bin\console.bat" goto okHome
echo The ORIENTDB_HOME environment variable is not defined correctly
echo This environment variable is needed to run this program
goto end
:okHome
rem Get remaining unshifted command line arguments and save them in the
set CMD_LINE_ARGS=
:setArgs
if ""%1""=="""" goto doneSetArgs
set CMD_LINE_ARGS=%CMD_LINE_ARGS% %1
shift
goto setArgs
:doneSetArgs
call %JAVA% -client -Dfile.encoding=utf-8 -Dorientdb.build.number=@BUILD@ -jar "%ORIENTDB_HOME%\lib\orientdb-tools-@[email protected]" %CMD_LINE_ARGS%
:end
| MaDaPHaKa/Orient-object | tools/script/console.bat | bat | apache-2.0 | 1,073 |
@ECHO OFF
REM
REM Copyright (c) 2012 The ANGLE Project Authors. All rights reserved.
REM Use of this source code is governed by a BSD-style license that can be
REM found in the LICENSE file.
REM
PATH %PATH%;%DXSDK_DIR%\Utilities\bin\x86
fxc /E standardvs /T vs_2_0 /Fh compiled/standardvs.h Blit.vs
fxc /E flipyvs /T vs_2_0 /Fh compiled/flipyvs.h Blit.vs
fxc /E passthroughps /T ps_2_0 /Fh compiled/passthroughps.h Blit.ps
fxc /E luminanceps /T ps_2_0 /Fh compiled/luminanceps.h Blit.ps
fxc /E componentmaskps /T ps_2_0 /Fh compiled/componentmaskps.h Blit.ps
fxc /E VS_Passthrough /T vs_4_0 /Fh compiled/passthrough11vs.h Passthrough11.hlsl
fxc /E PS_PassthroughRGBA /T ps_4_0 /Fh compiled/passthroughrgba11ps.h Passthrough11.hlsl
fxc /E PS_PassthroughRGB /T ps_4_0 /Fh compiled/passthroughrgb11ps.h Passthrough11.hlsl
fxc /E PS_PassthroughLum /T ps_4_0 /Fh compiled/passthroughlum11ps.h Passthrough11.hlsl
fxc /E PS_PassthroughLumAlpha /T ps_4_0 /Fh compiled/passthroughlumalpha11ps.h Passthrough11.hlsl
fxc /E VS_Clear /T vs_4_0 /Fh compiled/clear11vs.h Clear11.hlsl
fxc /E PS_ClearSingle /T ps_4_0 /Fh compiled/clearsingle11ps.h Clear11.hlsl
fxc /E PS_ClearMultiple /T ps_4_0 /Fh compiled/clearmultiple11ps.h Clear11.hlsl
| klim-iv/phantomjs-qt5 | src/webkit/Source/ThirdParty/ANGLE/src/libGLESv2/renderer/shaders/generate_shaders.bat | bat | bsd-3-clause | 1,229 |
@echo off
:: set msbuild_path=C:\Program Files (x86)\msbuild\14.0\bin
:: set msbuild_path=C:\Program Files (x86)\Microsoft Visual Studio\2017\Community\MSBuild\15.0\Bin
set msbuild_path=C:\Program Files (x86)\Microsoft Visual Studio\2019\Community\MSBuild\Current\Bin
set PATH=%PATH%;%msbuild_path%
msbuild /m "ide\\ds2wav.sln" "/t:_netfx\ds2wav" "/p:Platform=Any CPU;Configuration=Debug"
pause
| tfwio/ds2wav_cs | Build-dotnet-cli35-AnyCPU-Debug.bat | bat | mit | 395 |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.