text
stringlengths 3
1.04M
|
|---|
Dovetail jigs aren’t the kind of purchase that you should be willing to take a risk on. Not only can a poorly constructed jig make you frustrated while using it, but it can cause your woodworking projects to have poorly fitting joints as well. Dovetail joints are a big deal in cabinet making and furniture, so you definitely want your dovetails to look amazing. That’s why we decided to review a whole slew of dovetail jigs to determine which jig was the best.
We’ll get into how we came to our conclusions in a little bit, but our choice for best dovetail jig is the Porter Cable Dovetail Jig 4212 (Amazon | Rockler) by a very narrow margin. Porter Cable makes some of the best dovetail jigs you can buy and our second choice is also a Porter Cable, but we will get into those details in a minute.
The Porter Cable 4212 Dovetail Jig is a very well built piece of machinery. It is a 12” jig, which is the standard length. If you need a larger jig, read further below as we have a different recommendation if you need something larger. This jig can make half blind dovetails, sliding dovetails, through dovetails, and box joints. The guides on the Porter Cable are thick and made of aluminum, so they are sturdy and won’t bend under pressure. The manual that comes with the 4212 jig is well written and detailed. There is also an advanced manual on the Porter Cable website that can give you even more details if you want. Once the jig is dialed in, it stays put.
The main downside to the 4212 jig is that it uses proprietary bushings and router bits. This isn’t necessarily a big deal if you are just getting started and haven’t purchased any bits yet. However, if you already own some dovetail router bits for a different dovetail jig, then you are out of luck using them with this jig. The bits themselves aren’t expensive, but a few people have been annoyed by the fact that they couldn’t use what they already had. The Porter Cable bits can be a little hard to find too. Amazon doesn’t carry them, however Rockler does. Rockler should be one of your primary places to buy woodworking supplies online anyway, so you can always buy them and have them shipped to your house.
In second place for the best dovetail jig is the Porter Cable 4216 jig. The only thing the 4216 does that the 4212 doesn’t do is miniature dovetails, which isn’t enough to justify the larger cost for most people. Miniature dovetails aren’t as common as the others, since they are usually only used for small decorative boxes whereas the other joint types are used in box making, furniture construction, and cabinet making.
Rounding up the Porter Cable line is the 4210 jig (Amazon | Rockler). This jig can only do half blind dovetails and sliding dovetails. Because of that reduced ability, we don’t really recommend it because it is not nearly as versatile as the other two in the same product line.
If a 12” jig isn’t big enough for you and you want to move on to the 24”, be prepared to open your wallet for a much bigger price tag. For the 24” category, we recommend the Leigh D4R Pro 24” Dovetail Jig with an accessory kit from Rockler. This is the ultimate dovetail jig on the market, but it will cost you over $800 to purchase it. You can buy it without the accessory kit for less (Amazon | Rockler) but in our opinion, the accessory kit is definitely worth the extra.
The Leigh D4R Pro has adjustable guides so you can have any spacing you want for your dovetails. That is the ultimate flexibility in your designs. The adjustability means that you can cut dovetails in any length of wood rather than changing the length of your wood to suit the fixed length of the dovetail guide on other jigs. If you are willing to invest in a high quality, well built, and jig that will produce beautiful pins and tails every time.
Some of you may be asking why we haven’t recommended a Leigh jig yet. Well, quite frankly, the price is a huge barrier on the Leigh systems. The Leigh Super 12 Dovetail Jig (Amazon | Rockler) is at least $100 more expensive than the Porter Cable 4212, however it does have a huge benefit that the Porter Cable does not. The Porter Cable has a fixed width dovetailing. The Leigh jig has the benefit of having adjustable pins so that your dovetails can be any width that you want. You can even have variable spacing if you desire that in your woodworking project. Given the flexibility of this jig, it is easy to see why the extra money is highly worth it for some professionals. We simply don’t feel that it is the best jig for the majority of woodworkers. Since most woodworkers are going to desire fixed width, the Leigh Super 12 dovetail jig would only cause confusion and possible mistakes if the pins are not set perfectly at even spaces. So if you need the flexibility of variable spacing, this would be the jig for you.
On the lower end of the price spectrum is the Rockler Complete Dovetail Jig. The jig is well constructed and with over 130 reviews maintains a solid 4 out of 5 star rating. It is a good jig for those who are beginning and not willing to spend a fortune on one of the earlier mentioned jigs. The Rockler dovetail jig does have some drawbacks though which keeps us from fully recommending it. The dust collection attachment blocks some of the screws needed for adjustment. If you never change the settings, this might not be a huge deal to you, but it will be for most users. In addition to being difficult to set the adjustment screws, the jig overall is difficult to figure out. Most users ended up abandoning the included instruction manual in favor of YouTube videos to learn how to use the jig. While it is cheaper than the Porter Cable 4212, we don’t feel that the price is low enough to justify purchasing this instead of the much more robust Porter Cable system.
The dovetail jigs to stay away from are the Craftsman jigs from Sears. They are poorly constructed and some of them have plastic guides, which are almost useless for any real work. They will bend and can be damaged by the router bit if you are not extremely careful. Basically, do yourself a favor and don’t buy the cheapest jig you can find. You will regret it and end up returning it and buying something else. |
package tcc.heronsanches.ufba.fim.resource;
import java.io.Serializable;
import java.sql.Timestamp;
public class RequestAnswer implements Serializable{
public static final String PATH_RESOURCE_FIM = "http://localhost:8080/has/fim/pc/";
public static final String PATH_RESOURCE_ARDUINO = "http://localhost:8080/has/arduino/arduino/";
public static final String PATH_RESOURCE_RASPBERRY = "http://192.168.1.199/has/raspberry/";
private String requestPath;
private String parameter;
private String type;
private String answer;
private boolean siddeEffect;
/**it represents the timestamp that the request was recept or made*/
private String timestamp;
public RequestAnswer(String requestPath, String type, String parameter){
this.requestPath = requestPath;
this.type = type;
this.parameter = parameter;
this.timestamp = new Timestamp(System.currentTimeMillis()).toString();
}
public RequestAnswer(String requestPath, String type){
this.requestPath = requestPath;
this.type = type;
this.parameter = "";
this.timestamp = new Timestamp(System.currentTimeMillis()).toString();
}
public boolean isSiddeEffect() {
return siddeEffect;
}
public void setSiddeEffect(boolean siddeEffect) {
this.siddeEffect = siddeEffect;
}
public String getType() {
return type;
}
public void setType(String type) {
this.type = type;
}
public void setAnswer(String answer) {
this.answer = answer;
}
public String getRequestPath() {
return requestPath;
}
public String getParameter() {
return parameter;
}
public String getAnswer() {
return answer;
}
public String getTimestamp() {
return timestamp;
}
} |
from django import forms
from .models import Organization
class OrganizationForm(forms.ModelForm):
class Meta:
model = Organization
# Add CSS class 'form-control' to all fields to allow styling
widgets = {
'name': forms.TextInput(attrs={'class': 'form-control'}),
'description': forms.Textarea(attrs={'class': 'form-control'}),
'phone_number': forms.TextInput(attrs={'class': 'form-control'}),
'email': forms.EmailInput(attrs={'class': 'form-control'}),
'location': forms.TextInput(attrs={'class': 'form-control'}),
'parent': forms.Select(attrs={'class': 'form-control'}),
'openness': forms.Select(attrs={'class': 'form-control'}),
}
fields = [
"name",
"description",
"phone_number",
"email",
"location",
"parent",
"openness"
]
|
// Copyright 2014 The Chromium Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.
// This file is an internal atomic implementation, use base/atomicops.h instead.
// TODO(rmcilroy): Investigate whether we can use __sync__ intrinsics instead of
// the hand coded assembly without introducing perf regressions.
// TODO(rmcilroy): Investigate whether we can use acquire / release versions of
// exclusive load / store assembly instructions and do away with
// the barriers.
#ifndef BASE_ATOMICOPS_INTERNALS_ARM64_GCC_H_
#define BASE_ATOMICOPS_INTERNALS_ARM64_GCC_H_
#if defined(OS_QNX)
#include <sys/cpuinline.h>
#endif
namespace base {
namespace subtle {
inline void MemoryBarrier() {
__asm__ __volatile__ ("dmb ish" ::: "memory"); // NOLINT
}
// NoBarrier versions of the operation include "memory" in the clobber list.
// This is not required for direct usage of the NoBarrier versions of the
// operations. However this is required for correctness when they are used as
// part of the Acquire or Release versions, to ensure that nothing from outside
// the call is reordered between the operation and the memory barrier. This does
// not change the code generated, so has no or minimal impact on the
// NoBarrier operations.
inline Atomic32 NoBarrier_CompareAndSwap(volatile Atomic32* ptr,
Atomic32 old_value,
Atomic32 new_value) {
Atomic32 prev;
int32_t temp;
__asm__ __volatile__ ( // NOLINT
"0: \n\t"
"ldxr %w[prev], %[ptr] \n\t" // Load the previous value.
"cmp %w[prev], %w[old_value] \n\t"
"bne 1f \n\t"
"stxr %w[temp], %w[new_value], %[ptr] \n\t" // Try to store the new value.
"cbnz %w[temp], 0b \n\t" // Retry if it did not work.
"1: \n\t"
: [prev]"=&r" (prev),
[temp]"=&r" (temp),
[ptr]"+Q" (*ptr)
: [old_value]"IJr" (old_value),
[new_value]"r" (new_value)
: "cc", "memory"
); // NOLINT
return prev;
}
inline Atomic32 NoBarrier_AtomicExchange(volatile Atomic32* ptr,
Atomic32 new_value) {
Atomic32 result;
int32_t temp;
__asm__ __volatile__ ( // NOLINT
"0: \n\t"
"ldxr %w[result], %[ptr] \n\t" // Load the previous value.
"stxr %w[temp], %w[new_value], %[ptr] \n\t" // Try to store the new value.
"cbnz %w[temp], 0b \n\t" // Retry if it did not work.
: [result]"=&r" (result),
[temp]"=&r" (temp),
[ptr]"+Q" (*ptr)
: [new_value]"r" (new_value)
: "memory"
); // NOLINT
return result;
}
inline Atomic32 NoBarrier_AtomicIncrement(volatile Atomic32* ptr,
Atomic32 increment) {
Atomic32 result;
int32_t temp;
__asm__ __volatile__ ( // NOLINT
"0: \n\t"
"ldxr %w[result], %[ptr] \n\t" // Load the previous value.
"add %w[result], %w[result], %w[increment]\n\t"
"stxr %w[temp], %w[result], %[ptr] \n\t" // Try to store the result.
"cbnz %w[temp], 0b \n\t" // Retry on failure.
: [result]"=&r" (result),
[temp]"=&r" (temp),
[ptr]"+Q" (*ptr)
: [increment]"IJr" (increment)
: "memory"
); // NOLINT
return result;
}
inline Atomic32 Barrier_AtomicIncrement(volatile Atomic32* ptr,
Atomic32 increment) {
MemoryBarrier();
Atomic32 result = NoBarrier_AtomicIncrement(ptr, increment);
MemoryBarrier();
return result;
}
inline Atomic32 Acquire_CompareAndSwap(volatile Atomic32* ptr,
Atomic32 old_value,
Atomic32 new_value) {
Atomic32 prev = NoBarrier_CompareAndSwap(ptr, old_value, new_value);
MemoryBarrier();
return prev;
}
inline Atomic32 Release_CompareAndSwap(volatile Atomic32* ptr,
Atomic32 old_value,
Atomic32 new_value) {
MemoryBarrier();
Atomic32 prev = NoBarrier_CompareAndSwap(ptr, old_value, new_value);
return prev;
}
inline void NoBarrier_Store(volatile Atomic32* ptr, Atomic32 value) {
*ptr = value;
}
inline void Acquire_Store(volatile Atomic32* ptr, Atomic32 value) {
*ptr = value;
MemoryBarrier();
}
inline void Release_Store(volatile Atomic32* ptr, Atomic32 value) {
__asm__ __volatile__ ( // NOLINT
"stlr %w[value], %[ptr] \n\t"
: [ptr]"=Q" (*ptr)
: [value]"r" (value)
: "memory"
); // NOLINT
}
inline Atomic32 NoBarrier_Load(volatile const Atomic32* ptr) {
return *ptr;
}
inline Atomic32 Acquire_Load(volatile const Atomic32* ptr) {
Atomic32 value;
__asm__ __volatile__ ( // NOLINT
"ldar %w[value], %[ptr] \n\t"
: [value]"=r" (value)
: [ptr]"Q" (*ptr)
: "memory"
); // NOLINT
return value;
}
inline Atomic32 Release_Load(volatile const Atomic32* ptr) {
MemoryBarrier();
return *ptr;
}
// 64-bit versions of the operations.
// See the 32-bit versions for comments.
inline Atomic64 NoBarrier_CompareAndSwap(volatile Atomic64* ptr,
Atomic64 old_value,
Atomic64 new_value) {
Atomic64 prev;
int32_t temp;
__asm__ __volatile__ ( // NOLINT
"0: \n\t"
"ldxr %[prev], %[ptr] \n\t"
"cmp %[prev], %[old_value] \n\t"
"bne 1f \n\t"
"stxr %w[temp], %[new_value], %[ptr] \n\t"
"cbnz %w[temp], 0b \n\t"
"1: \n\t"
: [prev]"=&r" (prev),
[temp]"=&r" (temp),
[ptr]"+Q" (*ptr)
: [old_value]"IJr" (old_value),
[new_value]"r" (new_value)
: "cc", "memory"
); // NOLINT
return prev;
}
inline Atomic64 NoBarrier_AtomicExchange(volatile Atomic64* ptr,
Atomic64 new_value) {
Atomic64 result;
int32_t temp;
__asm__ __volatile__ ( // NOLINT
"0: \n\t"
"ldxr %[result], %[ptr] \n\t"
"stxr %w[temp], %[new_value], %[ptr] \n\t"
"cbnz %w[temp], 0b \n\t"
: [result]"=&r" (result),
[temp]"=&r" (temp),
[ptr]"+Q" (*ptr)
: [new_value]"r" (new_value)
: "memory"
); // NOLINT
return result;
}
inline Atomic64 NoBarrier_AtomicIncrement(volatile Atomic64* ptr,
Atomic64 increment) {
Atomic64 result;
int32_t temp;
__asm__ __volatile__ ( // NOLINT
"0: \n\t"
"ldxr %[result], %[ptr] \n\t"
"add %[result], %[result], %[increment] \n\t"
"stxr %w[temp], %[result], %[ptr] \n\t"
"cbnz %w[temp], 0b \n\t"
: [result]"=&r" (result),
[temp]"=&r" (temp),
[ptr]"+Q" (*ptr)
: [increment]"IJr" (increment)
: "memory"
); // NOLINT
return result;
}
inline Atomic64 Barrier_AtomicIncrement(volatile Atomic64* ptr,
Atomic64 increment) {
MemoryBarrier();
Atomic64 result = NoBarrier_AtomicIncrement(ptr, increment);
MemoryBarrier();
return result;
}
inline Atomic64 Acquire_CompareAndSwap(volatile Atomic64* ptr,
Atomic64 old_value,
Atomic64 new_value) {
Atomic64 prev = NoBarrier_CompareAndSwap(ptr, old_value, new_value);
MemoryBarrier();
return prev;
}
inline Atomic64 Release_CompareAndSwap(volatile Atomic64* ptr,
Atomic64 old_value,
Atomic64 new_value) {
MemoryBarrier();
Atomic64 prev = NoBarrier_CompareAndSwap(ptr, old_value, new_value);
return prev;
}
inline void NoBarrier_Store(volatile Atomic64* ptr, Atomic64 value) {
*ptr = value;
}
inline void Acquire_Store(volatile Atomic64* ptr, Atomic64 value) {
*ptr = value;
MemoryBarrier();
}
inline void Release_Store(volatile Atomic64* ptr, Atomic64 value) {
__asm__ __volatile__ ( // NOLINT
"stlr %x[value], %[ptr] \n\t"
: [ptr]"=Q" (*ptr)
: [value]"r" (value)
: "memory"
); // NOLINT
}
inline Atomic64 NoBarrier_Load(volatile const Atomic64* ptr) {
return *ptr;
}
inline Atomic64 Acquire_Load(volatile const Atomic64* ptr) {
Atomic64 value;
__asm__ __volatile__ ( // NOLINT
"ldar %x[value], %[ptr] \n\t"
: [value]"=r" (value)
: [ptr]"Q" (*ptr)
: "memory"
); // NOLINT
return value;
}
inline Atomic64 Release_Load(volatile const Atomic64* ptr) {
MemoryBarrier();
return *ptr;
}
} // namespace subtle
} // namespace base
#endif // BASE_ATOMICOPS_INTERNALS_ARM64_GCC_H_
|
Colin Dodds is the author of Another Broken Wizard, WINDFALL and The Last Bad Job, which Norman Mailer touted as showing “something that very few writers have; a species of inner talent that owes very little to other people.” His writing has appeared in more than two hundred publications, and been nominated for the Pushcart Prize and the Best of the Net Anthology. Poet and songwriter David Berman (Silver Jews, Actual Air) said of Dodds’ work: “These are very good poems. For moments I could even feel the old feelings when I read them.” Colin’s book-length poem That Happy Captive was a finalist for the Trio House Press Louise Bogan Award as well as the 42 Miles Press Poetry Award in 2015. And his screenplay, Refreshment, was named a semi-finalist in the 2010 American Zoetrope Contest. Colin lives in Brooklyn, New York, with his wife and daughter. See more of his work at thecolindodds.com.
“(O)ne of the most interesting books you’ll read this year,” (IndieReader Reviews - 4.7 of 5 Stars) WATERSHED is a dystopian thriller about a troubled, pregnant woman, and the two men—a snake dealer with a sideline in secret messages and a billionaire living under a false name—who vie for her. Their struggle leads them through a near-future America of anti-technology neighborhoods and illegal hospitals, where stockbrokers moonlight as assassins, nurses procure obscure pleasures, and the powers that be blow up the new World Trade Center to goose tourism. As the mystery deepens, one thing becomes clear – the future's about to be born… but who will change the diapers?
I was given an ARC and it proved to be quite a page turner. I read this book in one day.
The plot is convoluted and it is a good thing that the writing style is so good that it keeps the reader’s attention focused on the evolution of the story. Otherwise, I’m afraid, one could get lost in the ramifications of the plot. At first, I was thinking that the book might rate only four stars and a half because of that but I changed my mind. It seemed too unfair considering that the novel is indeed a good one.
The narrative flows without any hiccups. I enjoyed the style and the associations the writer made right from the beginning. Colin Dodds seemed to be well versed in playing with words and use them to create arresting images in the reader’s mind. The language is striking and clearly not for the faint-hearted. There’s verbal and physical violence and people who dislike such things should stir away from the book.
Colin Dodds develops an interesting world, marred with the most poignant negative human traits. The story evolves in the States and in a way, there’s a lot of the real America in this book.
His characters are far from being positive in any way, and yet, most of them are likable and one can relate to them. Both Norwood and Raquel are believable and pleasant, although both show weaknesses and are the antithesis of real heroes.
Most of Dodds’s characters are well rounded but the most fleshed-out are Norwood and Raquel as well as their Nemesis, Hurley and his opponent Seth. The background stories sound real and are far from being far-fetched.
CONGRATULATIONS TO COLIN DODD FOR THE LAUNCH OF HIS NEW BOOK!
I've read about the premise of this book before. I'm actually looking forward to its final release. The author is really famous for doing such amazing literary pieces. I'll be sure to keep myself updated with its release. I have high expectations for this book and I hope that it meets them. |
Embroidery Machines There are 5 products.
It’s not just a hobby. It’s a passion for each project. It’s not just a new machine. It’s a new era. Introducing the new SINGER® QUABTUM STYLIST™ embroidery only machine. This machine is built to handle whatever embroidery project you throw at it—it’s designed to power your passion.
Sewing and embroidery come together The SINGER® FUTURA™ XL-400 sewing and embroidery machine: everything you love about your SINGER® sewing machine, built right into an embroidery machine. It’s never been easier to add the personal touches that make your sewing projects shine. Automatic features make it easy to let your creativity lead the way!
Find your needs in this machine. Computerized sewing and embroidery machine with economical price. Completed with 404 built-in stitches, 196 pattern of numeral alphabet, and other practical function, all integrated in this single machine. |
Who has broken Gods Covenant?
Where are you putting your trust? What do you follow? The world and it’a way or your Father In Heaven who has blessed you for worshipping Him and following , abiding in His commandments. |
Guyana’s Deshana Ashanti Skeete produced a stirring 400m run to give this country its first gold medal of the second South American Youth Games yesterday in Santiago, Chile, while Jermaine King and Kenisha Phillips added to the lustre with silver medal performances.
Competing in the 400m final, Skeete clocked 57.28s to shock her South American competitors including the favoured Brazilian Jessica Vitoria Oliveira Moreira who had to settle for second place despite having a personal best time of 56.21s.
However, her final effort of 57.54s was only good enough for her to be second best to the brilliant Guyanese Skeete.
Third place went to Andreina Valencia of Ecuador who clocked 58.81s.
Earlier, King clocked 10.963 to place second in the men’s 100m final while Phillips clocked 12.18 seconds in the female 100m final.
The 100m men’s final was won by Paraguay’s Fabrizio Acquino in 10.92s while Colombia’s Gian Carlos Mosquera Mosquera took the bronze in 10.966s.
Colombia’s Angie Saray Gonzalez Echeverria won the female 100m final in 12.114s while another Colombia Shary Julitza Vallecilla Quinonez was third in 12.27s. |
Positive results of the Physicians’ Health Study II show that supplement users - usually more likely to have healthier lifestyles than non-users - may gain potential additional benefits from a daily multivitamin. In this special guest article, Steve Mister, President & CEO for the Council for Responsible Nutrition (CRN), welcomes the results but cautions on understanding the limitations of supplements - 'we shouldn’t expect vitamins to perform miracles'.
"This week, JAMA published the results of the second supplement arm of the Physicians’ Health Study II. Last month, the first arm was released, indicating that multivitamin use had a modest but significant reduction on the risk of cancer among the middle-aged and older, healthy, predominantly white male physician population taking a daily multivitamin in the study.
That is certainly good news for the 42% of American adults who regularly use a multivitamin for better health.
Now comes this new aspect of the study which indicates that, among that same group of physicians, the multivitamin apparently did not reduce their risk of major cardiovascular events.
Disappointing news for consumers? Yes. But reason to throw out your multivitamins? Hardly. It sure would have been nice if the study gave us one more reason to recommend multivitamins, but perhaps this is a good wake-up call too: We shouldn’t expect vitamins to perform miracles.
Multivitamins supplement a healthy diet by providing a range of nutritional benefits, but they are not a magic bullet. They don’t wash the windows, clean dust bunnies out of the corners, or change the oil in our cars either.
In other words, these middle-aged and older, mostly white male doctors already had relatively healthy diets, healthy BMIs, they exercised, very few smoked, and the majority was on a daily aspirin regimen.
All of these healthy behaviors lower the risk factors for heart disease. It would have been nothing short of amazing if, in this population that was already doing everything right to prevent heart trouble, the participants had seen even further risk reduction simply by adding a multivitamin.
She chides that sedentary lifestyles, processed or fast foods, continuing to smoke, and failing to adhere to one’s regimen of lifesaving prescription medications are the real causes for cardiovascular disease. Then she criticizes multivitamins as a culprit under the assertion that consumers will somehow believe that vitamins supposedly give us a “free pass” to continue those behaviors. REALLY?
Tell that to all the supplement users who are more likely than their non-supplement-using counterparts to exercise, visit their docs, take their prescription meds, maintain a healthy BMI, and not smoke.
To the contrary, numerous studies show that supplement users are more likely to be leaner and more physically active than non-supplement users, more likely than non-users to try to eat a healthy diet, more likely to engage in regular physical activity, and see a doctor regularly. The behavioral data directly refutes her assertion.
And then she opines that, “Robust data from multiple trials clearly confirm that CVD cannot be prevented or treated with vitamins.” This, despite the fact that in the secondary analysis of PHS II there were fewer heart attack deaths among multivitamin users compared to placebo, which was even more prominent in participants with no baseline history of heart disease.
Because there were so few heart attack deaths during the study – remember, this was a relatively healthy population – and this morsel was only discovered in the secondary analysis, I don’t want to overplay these findings, but it hardly slams shut the door as a “confirmation” that a multivitamin does not play a role in heart health. And I can’t help but wonder what effect the multivitamin may have had in a less healthy population.
Lastly, I can’t help but notice that the typical multivitamins—although they absolutely round out the recognized essential nutrients we may miss in our diets—are hardly formulated specifically for heart health. Nor are multivitamins usually advertised for that purpose.
There are other supplements that have demonstrated benefits for heart health—omega-3 fatty acids to help reduce triglycerides; plant sterols and stanols to help reduce cholesterol; vitamin B, niacin or magnesium (all at doses much higher than the RDA levels typically found in a multivitamin) for reducing homocysteine, cholesterol and blood pressure, respectively.
While these supplements are very effective for heart health, I would doubt most healthcare practitioners would recommend a multivitamin for that purpose. Like I said earlier, the earnest multivitamin is not a magic bullet.
Thank goodness most consumers seem to know that. The truth is that practicing a variety of healthy behaviors collectively contributes to better health. It may be impossible to “tease out” just one as the pivotal one.
That’s what makes the earlier cancer-prevention aspect of the PHS II study that much more remarkable – in that case, the addition of the multivitamin did show a modest but significant reduction of cancer incidence, on top of everything else.
I’ve heard critics of the vitamin industry say things like, “you should act like the typical supplement user, just leave out the supplements.” However, it seems to me the PHS II studies refute that dogma. Even among that healthy population, multivitamins seem to add a protective benefit, at least with cancer risk reduction, and maybe even with regard to heart health among a less healthy population.
So go ahead and act like the supplement user and practice a healthy lifestyle, but don’t forget to take your supplements." |
Arie. Du, Geist des Herrn!
Goethe revered him and raved about him in his Werther – the poet Friedrich Gottlieb Klopstock not only filled poets with enthusiasm, but has also inspired musicians from G. P. Telemann through Gustav Mahler to the present day. Klopstock realized his ideal of antique poetry in the epic poem The Messiah, which is written throughout in hexameters. For Georg Philipp Telemann, his poetry posed a new challenge; Telemann tried his hand several times on Klopstock’s works, the most famous being the two settings, recorded here, of the first and tenth cantos of the Messiah. Telemann sensitively translated the mood and the form of the text into music, searching for new ways that contrasted with the realization of the usual cantata or oratorio forms. This major work is complemented by the cantata Komm, Geist des Herrn, composed in 1759, and by Klopstock’s musical elegy David and Jonathan, which was set by the Magdeburg Music Director Johann Heinrich Rolle. The Leipziger Concert, under the direction of Siegfried Pank, delights with a very empathic musical approach to Klopstock, Telemann and Rolle. |
On Saturday, December 22 at 7 pm. Buy tickets.
On Monday, January 21 at 2 pm. Buy tickets.
Directed by Antonio Méndez Esparza, Spain / USA, 2017, 114 minutes. Watch trailer.
On the edge of adulthood, Andrew (Andrew Bleechington) yearns to find his purpose. With his mother (Regina Williams) longing to find more to her life than parenting, Andrew is forced to take on the mounting pressure of family responsibility. However, his search for connection with an absent father leads him to a precarious crossroad. With a style that bears comparison to Italian Neorealism, this drama won the 2018 Independent Spirit John Cassavetes Award.
One of the year’s most essential films.
It’s a vital, singularly crafted film that simply tells it… like it is through the eyes of a struggling African American single mother and the adolescent son she desperately wants to keep out of trouble against the mounting odds. |
Aptus Utilities worked on Kingswood Homes’ exclusive Willows development at Greenhalgh, a small village set against the rural backdrop of the Fylde Coast. The work included water and electricity connections to fourteen new build homes, along with the strategic relocation of a high voltage electricity pole.
Construction on the development focused on high specification housing with energy-efficient heating systems. The houses are built around a communal feature that includes a green space with an established, landscaped pond. At the heart of this feature was an electricity pole, sited close to an area designated for a children’s playground. Consequently, the pole’s relocation was an important aspect of Aptus Utilities’ work and essential to the success of the development.
With families moving into their new homes, and many residents in neighbouring villages reliant on its power, the relocation of the pole required urgency and sensitive handling. Aptus responded to the situation by liaising closely with Electricity North West in order to bring the operation forward, assisting with ENW’s workload to prepare the site for connection and taking steps to remove asbestos discovered during the work.
Aptus Utilities pride themselves on conducting business with transparency and integrity, and were responsive and communicative with Kingswood throughout the project. When it emerged Aptus had laid the wrong cable following a supplier error, Aptus devised an innovative and cost-effective solution, minimising the re-excavation of newly laid roads and footpaths by disconnecting the existing cable and relocating the new one around the pond. Having impressed throughout the project, Kingswood went on to award Aptus the contract for street lighting. |
/*
* Copyright (c) 2014 Magnet Systems, Inc.
* All rights reserved.
*
* Licensed under the Apache License, Version 2.0 (the "License"); you
* may not use this file except in compliance with the License. You
* may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
* implied. See the License for the specific language governing
* permissions and limitations under the License.
*/
#import <Rest2Mobile/Rest2Mobile.h>
typedef NS_ENUM(NSUInteger, EnumAttribute){
EnumAttributeSTARTED = 0,
EnumAttributeINPROGRESS,
EnumAttributeENDED,
};
@interface EnumAttributeContainer : NSObject
+ (NSDictionary *)mappings;
@end
@interface TESTNodeWithAllTypes : MMResourceNode
//field declarations
/** A BigDecimal attribute */
@property (nonatomic, strong) NSDecimalNumber *bigDecimalAttribute;
/** A BigInteger attribute */
@property (nonatomic, strong) NSDecimalNumber *bigIntegerAttribute;
/** A boolean attribute */
@property (nonatomic, assign) BOOL booleanAttribute;
/** A Boolean attribute */
@property (nonatomic, assign) BOOL booleanWrapperAttribute;
/** */
@property (nonatomic, strong) NSValue *booleanReferenceAttribute;
/** A byte attribute */
@property (nonatomic, assign) char byteAttribute;
/** A bytes attribute */
@property (nonatomic, strong) NSData *bytesAttribute;
/** A Byte attribute */
@property (nonatomic, assign) char byteWrapperAttribute;
/** A char attribute */
@property (nonatomic, assign) unichar charAttribute;
/** A Character attribute */
@property (nonatomic, assign) unichar charWrapperAttribute;
/** A Date attribute */
@property (nonatomic, strong) NSDate *dateAttribute;
/** A double attribute */
@property (nonatomic, assign) double doubleAttribute;
/** A Double attribute */
@property (nonatomic, assign) double doubleWrapperAttribute;
/** An enum attribute */
@property (nonatomic, assign) EnumAttribute enumAttribute;
/** A float attribute */
@property (nonatomic, assign) float floatAttribute;
/** A Float attribute */
@property (nonatomic, assign) float floatWrapperAttribute;
/** An int attribute */
@property (nonatomic, assign) int integerAttribute;
/** An Integer attribute */
@property (nonatomic, assign) int integerWrapperAttribute;
/** A long attribute */
@property (nonatomic, assign) long long longAttribute;
/** A Long attribute */
@property (nonatomic, assign) long long longWrapperAttribute;
/** A short attribute */
@property (nonatomic, assign) short shortAttribute;
/** A Short attribute */
@property (nonatomic, assign) short shortWrapperAttribute;
/** A string attribute */
@property (nonatomic, copy) NSString *stringAttribute;
/** */
@property (nonatomic, strong) NSValue *stringReferenceAttribute;
/** A URI attribute */
@property (nonatomic, strong) NSURL *uriAttribute;
/** A List of Strings attribute */
@property (nonatomic, strong) NSArray *listOfStringsAttribute;
/** A List of Shorts attribute */
@property (nonatomic, strong) NSArray *listOfShortsAttribute;
@end |
<?php
/*
* suricata_libhtp_policy_engine.php
*
* Portions of this code are based on original work done for the
* Snort package for pfSense from the following contributors:
*
* Copyright (C) 2005 Bill Marquette <[email protected]>.
* Copyright (C) 2003-2004 Manuel Kasper <[email protected]>.
* Copyright (C) 2006 Scott Ullrich
* Copyright (C) 2009 Robert Zelaya Sr. Developer
* Copyright (C) 2012 Ermal Luci
* All rights reserved.
*
* Adapted for Suricata by:
* Copyright (C) 2014 Bill Meeks
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
* AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
* OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/**************************************************************************************
This file contains code for adding/editing an existing Libhtp Policy Engine.
It is included and injected inline as needed into the suricata_app_parsers.php
page to provide the edit functionality for Host OS Policy Engines.
The following variables are assumed to exist and must be initialized
as necessary in order to utilize this page.
$g --> system global variables array
$config --> global variable pointing to configuration information
$pengcfg --> array containing current Libhtp Policy engine configuration
Information is returned from this page via the following form fields:
policy_name --> Unique Name for the Libhtp Policy Engine
policy_bind_to --> Alias name representing "bind_to" IP address for engine
personality --> Operating system chosen for engine policy
select_alias --> Submit button for select alias operation
req_body_limit --> Request Body Limit size
resp_body_limit --> Response Body Limit size
enable_double_decode_path --> double-decode path part of URI
enable_double_decode_query --> double-decode query string part of URI
enable_uri_include_all --> inspect all of URI
save_libhtp_policy --> Submit button for save operation and exit
cancel_libhtp_policy --> Submit button to cancel operation and exit
**************************************************************************************/
?>
<table class="tabcont" width="100%" border="0" cellpadding="6" cellspacing="0">
<tbody>
<tr>
<td colspan="2" valign="middle" class="listtopic"><?php echo gettext("Suricata Target-Based HTTP Server Policy Configuration"); ?></td>
</tr>
<tr>
<td valign="top" class="vncell"><?php echo gettext("Engine Name"); ?></td>
<td class="vtable">
<input name="policy_name" type="text" class="formfld unknown" id="policy_name" size="25" maxlength="25"
value="<?=htmlspecialchars($pengcfg['name']);?>"<?php if (htmlspecialchars($pengcfg['name']) == " default") echo " readonly";?>>
<?php if (htmlspecialchars($pengcfg['name']) <> "default")
echo gettext("Name or description for this engine. (Max 25 characters)");
else
echo "<span class=\"red\">" . gettext("The name for the 'default' engine is read-only.") . "</span>";?><br/>
<?php echo gettext("Unique name or description for this engine configuration. Default value is ") .
"<strong>" . gettext("default") . "</strong>"; ?>.<br/>
</td>
</tr>
<tr>
<td valign="top" class="vncell"><?php echo gettext("Bind-To IP Address Alias"); ?></td>
<td class="vtable">
<?php if ($pengcfg['name'] <> "default") : ?>
<table width="95%" border="0" cellpadding="2" cellspacing="0">
<tbody>
<tr>
<td class="vexpl"><input name="policy_bind_to" type="text" class="formfldalias" id="policy_bind_to" size="32"
value="<?=htmlspecialchars($pengcfg['bind_to']);?>" title="<?=trim(filter_expand_alias($pengcfg['bind_to']));?>" autocomplete="off">
<?php echo gettext("IP List to bind this engine to. (Cannot be blank)"); ?></td>
<td class="vexpl" align="right"><input type="submit" class="formbtns" name="select_alias" value="Aliases"
title="<?php echo gettext("Select an existing IP alias");?>"/></td>
</tr>
<tr>
<td class="vexpl" colspan="2"><?php echo gettext("This policy will apply for packets with destination addresses contained within this IP List.");?></td>
</tr>
</tbody>
</table>
<br/><span class="red"><strong><?php echo gettext("Note: ") . "</strong></span>" . gettext("Supplied value must be a pre-configured Alias or the keyword 'all'.");?>
<?php else : ?>
<input name="policy_bind_to" type="text" class="formfldalias" id="policy_bind_to" size="32"
value="<?=htmlspecialchars($pengcfg['bind_to']);?>" autocomplete="off" readonly>
<?php echo "<span class=\"red\">" . gettext("IP List for the default engine is read-only and must be 'all'.") . "</span>";?><br/>
<?php echo gettext("The default engine is required and will apply for packets with destination addresses not matching other engine IP Lists.");?><br/>
<?php endif ?>
</td>
</tr>
<tr>
<td width="22%" valign="top" class="vncell"><?php echo gettext("Target Web Server Personality"); ?> </td>
<td width="78%" class="vtable">
<select name="personality" class="formselect" id="personality">
<?php
$profile = array( 'Apache_2', 'Generic', 'IDS', 'IIS_4_0', 'IIS_5_0', 'IIS_5_1', 'IIS_6_0', 'IIS_7_0', 'IIS_7_5', 'Minimal' );
foreach ($profile as $val): ?>
<option value="<?=$val;?>"
<?php if ($val == $pengcfg['personality']) echo "selected"; ?>>
<?=gettext($val);?></option>
<?php endforeach; ?>
</select> <?php echo gettext("Choose the web server personality appropriate for the protected hosts. The default is ") .
"<strong>" . gettext("IDS") . "</strong>"; ?>.<br/><br/>
<?php echo gettext("Available web server personality targets are: Apache 2, Generic, IDS (default), IIS_4_0, IIS_5_0, IIS_5_1, IIS_6_0, IIS_7_0, IIS_7_5 and Minimal."); ?><br/>
</td>
</tr>
<tr>
<td colspan="2" valign="top" class="listtopic"><?php echo gettext("Inspection Limits"); ?></td>
</tr>
<tr>
<td width="22%" valign="top" class="vncell"><?php echo gettext("Request Body Limit"); ?></td>
<td width="78%" class="vtable">
<input name="req_body_limit" type="text" class="formfld unknown" id="req_body_limit" size="9"
value="<?=htmlspecialchars($pengcfg['request-body-limit']);?>">
<?php echo gettext("Maximum number of HTTP request body bytes to inspect. Default is ") .
"<strong>" . gettext("4,096") . "</strong>" . gettext(" bytes."); ?><br/><br/>
<?php echo gettext("HTTP request bodies are often big, so they take a lot of time to process which has a significant impact ") .
gettext("on performance. This sets the limit (in bytes) of the client-body that will be inspected.") . "<br/><br/><span class=\"red\"><strong>" .
gettext("Note: ") . "</strong></span>" . gettext("Setting this parameter to 0 will inspect all of the client-body."); ?>
</td>
</tr>
<tr>
<td width="22%" valign="top" class="vncell"><?php echo gettext("Response Body Limit"); ?></td>
<td width="78%" class="vtable">
<input name="resp_body_limit" type="text" class="formfld unknown" id="resp_body_limit" size="9"
value="<?=htmlspecialchars($pengcfg['response-body-limit']);?>">
<?php echo gettext("Maximum number of HTTP response body bytes to inspect. Default is ") .
"<strong>" . gettext("4,096") . "</strong>" . gettext(" bytes."); ?><br/><br/>
<?php echo gettext("HTTP response bodies are often big, so they take a lot of time to process which has a significant impact ") .
gettext("on performance. This sets the limit (in bytes) of the server-body that will be inspected.") . "<br/><br/><span class=\"red\"><strong>" .
gettext("Note: ") . "</strong></span>" . gettext("Setting this parameter to 0 will inspect all of the server-body."); ?>
</td>
</tr>
<tr>
<td colspan="2" valign="top" class="listtopic"><?php echo gettext("Decode Settings"); ?></td>
</tr>
<tr>
<td width="22%" valign="top" class="vncell"><?php echo gettext("Double-Decode Path"); ?></td>
<td width="78%" class="vtable"><input name="enable_double_decode_path" type="checkbox" value="yes" <?php if ($pengcfg['double-decode-path'] == "yes") echo " checked"; ?>>
<?php echo gettext("Suricata will double-decode path section of the URI. Default is ") . "<strong>" . gettext("Not Checked") . "</strong>."; ?></td>
</tr>
<tr>
<td width="22%" valign="top" class="vncell"><?php echo gettext("Double-Decode Query"); ?></td>
<td width="78%" class="vtable"><input name="enable_double_decode_query" type="checkbox" value="yes" <?php if ($pengcfg['double-decode-query'] == "yes") echo " checked"; ?>>
<?php echo gettext("Suricata will double-decode query string section of the URI. Default is ") . "<strong>" . gettext("Not Checked") . "</strong>."; ?></td>
</tr>
<tr>
<td width="22%" valign="top" class="vncell"><?php echo gettext("URI Include-All"); ?></td>
<td width="78%" class="vtable"><input name="enable_uri_include_all" type="checkbox" value="yes" <?php if ($pengcfg['uri-include-all'] == "yes") echo " checked"; ?>>
<?php echo gettext("Include all parts of the URI. Default is ") . "<strong>" . gettext("Not Checked") . "</strong>."; ?><br/><br/>
<?php echo gettext("By default the 'scheme', username/password, hostname and port are excluded from inspection. Enabling this option " .
"adds all of them to the normalized uri. This was the default in Suricata versions prior to 2.0."); ?></td>
</tr>
<tr>
<td width="22%" valign="bottom"> </td>
<td width="78%" valign="bottom">
<input name="save_libhtp_policy" id="save_libhtp_policy" type="submit" class="formbtn" value=" Save " title="<?php echo
gettext("Save web server policy engine settings and return to App Parsers tab"); ?>">
<input name="cancel_libhtp_policy" id="cancel_libhtp_policy" type="submit" class="formbtn" value="Cancel" title="<?php echo
gettext("Cancel changes and return to App Parsers tab"); ?>"></td>
</tr>
</tbody>
</table>
<script type="text/javascript" src="/javascript/autosuggest.js">
</script>
<script type="text/javascript" src="/javascript/suggestions.js">
</script>
<script type="text/javascript">
//<![CDATA[
var addressarray = <?= json_encode(get_alias_list(array("host", "network"))) ?>;
function createAutoSuggest() {
<?php
echo "\tvar objAlias = new AutoSuggestControl(document.getElementById('policy_bind_to'), new StateSuggestions(addressarray));\n";
?>
}
setTimeout("createAutoSuggest();", 500);
</script>
|
require 'encryptors/aes256'
|
<H1>CARDS LIST</h1>
<div ng-repeat="card in CardCtrl.cardlist" ng-bind="card.title"></div>
|
#ifndef _LINUX_IRQDESC_H
#define _LINUX_IRQDESC_H
/*
* Core internal functions to deal with irq descriptors
*
* This include will move to kernel/irq once we cleaned up the tree.
* For now it's included from <linux/irq.h>
*/
struct irq_affinity_notify;
struct proc_dir_entry;
struct module;
struct irq_desc;
/**
* struct irq_desc - interrupt descriptor
* @irq_data: per irq and chip data passed down to chip functions
* @kstat_irqs: irq stats per cpu
* @handle_irq: highlevel irq-events handler
* @preflow_handler: handler called before the flow handler (currently used by sparc)
* @action: the irq action chain
* @status: status information
* @core_internal_state__do_not_mess_with_it: core internal status information
* @depth: disable-depth, for nested irq_disable() calls
* @wake_depth: enable depth, for multiple irq_set_irq_wake() callers
* @irq_count: stats field to detect stalled irqs
* @last_unhandled: aging timer for unhandled count
* @irqs_unhandled: stats field for spurious unhandled interrupts
* @lock: locking for SMP
* @affinity_hint: hint to user space for preferred irq affinity
* @affinity_notify: context for notification of affinity changes
* @pending_mask: pending rebalanced interrupts
* @threads_oneshot: bitfield to handle shared oneshot threads
* @threads_active: number of irqaction threads currently running
* @wait_for_threads: wait queue for sync_irq to wait for threaded handlers
* @dir: /proc/irq/ procfs entry
* @name: flow handler name for /proc/interrupts output
*/
struct irq_desc {
struct irq_data irq_data;
unsigned int __percpu *kstat_irqs;
irq_flow_handler_t handle_irq;
#ifdef CONFIG_IRQ_PREFLOW_FASTEOI
irq_preflow_handler_t preflow_handler;
#endif
struct irqaction *action; /* IRQ action list */
unsigned int status_use_accessors;
unsigned int core_internal_state__do_not_mess_with_it;
unsigned int depth; /* nested irq disables */
unsigned int wake_depth; /* nested wake enables */
unsigned int irq_count; /* For detecting broken IRQs */
unsigned long last_unhandled; /* Aging timer for unhandled count */
unsigned int irqs_unhandled;
raw_spinlock_t lock;
struct cpumask *percpu_enabled;
#ifdef CONFIG_SMP
const struct cpumask *affinity_hint;
struct irq_affinity_notify *affinity_notify;
#ifdef CONFIG_GENERIC_PENDING_IRQ
cpumask_var_t pending_mask;
#endif
#endif
unsigned long threads_oneshot;
atomic_t threads_active;
wait_queue_head_t wait_for_threads;
#ifdef CONFIG_PROC_FS_MIN
struct proc_dir_entry *dir;
#endif
int parent_irq;
struct module *owner;
const char *name;
} ____cacheline_internodealigned_in_smp;
#ifndef CONFIG_SPARSE_IRQ
extern struct irq_desc irq_desc[NR_IRQS];
#endif
static inline struct irq_data *irq_desc_get_irq_data(struct irq_desc *desc)
{
return &desc->irq_data;
}
static inline struct irq_chip *irq_desc_get_chip(struct irq_desc *desc)
{
return desc->irq_data.chip;
}
static inline void *irq_desc_get_chip_data(struct irq_desc *desc)
{
return desc->irq_data.chip_data;
}
static inline void *irq_desc_get_handler_data(struct irq_desc *desc)
{
return desc->irq_data.handler_data;
}
static inline struct msi_desc *irq_desc_get_msi_desc(struct irq_desc *desc)
{
return desc->irq_data.msi_desc;
}
/*
* Architectures call this to let the generic IRQ layer
* handle an interrupt. If the descriptor is attached to an
* irqchip-style controller then we call the ->handle_irq() handler,
* and it calls __do_IRQ() if it's attached to an irqtype-style controller.
*/
static inline void generic_handle_irq_desc(unsigned int irq, struct irq_desc *desc)
{
desc->handle_irq(irq, desc);
}
int generic_handle_irq(unsigned int irq);
/* Test to see if a driver has successfully requested an irq */
static inline int irq_has_action(unsigned int irq)
{
struct irq_desc *desc = irq_to_desc(irq);
return desc->action != NULL;
}
/* caller has locked the irq_desc and both params are valid */
static inline void __irq_set_handler_locked(unsigned int irq,
irq_flow_handler_t handler)
{
struct irq_desc *desc;
desc = irq_to_desc(irq);
desc->handle_irq = handler;
}
/* caller has locked the irq_desc and both params are valid */
static inline void
__irq_set_chip_handler_name_locked(unsigned int irq, struct irq_chip *chip,
irq_flow_handler_t handler, const char *name)
{
struct irq_desc *desc;
desc = irq_to_desc(irq);
irq_desc_get_irq_data(desc)->chip = chip;
desc->handle_irq = handler;
desc->name = name;
}
static inline int irq_balancing_disabled(unsigned int irq)
{
struct irq_desc *desc;
desc = irq_to_desc(irq);
return desc->status_use_accessors & IRQ_NO_BALANCING_MASK;
}
static inline int irq_is_percpu(unsigned int irq)
{
struct irq_desc *desc;
desc = irq_to_desc(irq);
return desc->status_use_accessors & IRQ_PER_CPU;
}
static inline void
irq_set_lockdep_class(unsigned int irq, struct lock_class_key *class)
{
struct irq_desc *desc = irq_to_desc(irq);
if (desc)
lockdep_set_class(&desc->lock, class);
}
#ifdef CONFIG_IRQ_PREFLOW_FASTEOI
static inline void
__irq_set_preflow_handler(unsigned int irq, irq_preflow_handler_t handler)
{
struct irq_desc *desc;
desc = irq_to_desc(irq);
desc->preflow_handler = handler;
}
#endif
#endif
|
The Solana Beach Transit Center is home to a new information kiosk that aims to attract more visitors by showcasing what Solana Beach has to offer them.
During a March 2 ribbon-cutting ceremony, Solana Beach mayor Lesa Heebner unveiled the prototype, which includes a large TV screen that displays a slideshow of neighborhood images and a touch-screen kiosk that allows people to browse nearby businesses. Every licensed business in the city is listed, and grouped by categories. Once a person finds something that piques his interest — a sushi bar, for example — the kiosk will print a menu, a map with directions from the train station, and perhaps even a coupon. The system can also be updated to spotlight happenings throughout Solana Beach.
The hope, Heebner said, is that this will encourage mass transit ridership, bolster the local economy, and promote Solana Beach as a “wonderful, walkable city.” Therefore, the project was a collaboration between North County Transit District (NCTD), the City of Solana Beach, the South Cedros Merchants Association and the 101 Merchants Association.
The project, which was made possible thanks to funding from Solana Beach philanthropists Peter House and Carol Childs, will serve as pilot program for NCTD and likely be adopted throughout its rail system. |
This Cookie Notice applies to pacheco-cabins-cr.book.direct owned and operated by Pacheco Tours & Cabins and describes how we use personal data collected through Cookies and other techniques including pixels ('Cookies') on our website pacheco-cabins-cr.book.direct ('Site').
If you have questions or concerns about our processing of your personal data, or if you wish to exercise any of the rights you have under this notice, you are welcome to contact us via [email protected] . You may also contact your local data protection authority with questions and complaints. |
We’ve all heard that it’s important for your child to get a college degree, but is it worth it?
College is expensive — we get it. When you add it up, each year of tuition, fees, room and board can cost as much as an annual salary. Yikes.
Still, the worth it question is a tough one to nail. “When you try to give a blanket answer to that question, it’s always wrong,” said Reyna Gobel, student loan expert and the author of the CliffsNote’s “Parents Guide to Paying for College and Repaying Student Loans.”The mostly right (and complicated) answer is that it depends. It depends on the kind of school your kid goes to, what the major is and if your kid even goes into the field their major is for.
What’s the benefit on the other side? You’ll see that a recent college graduate’s average salary is $50,390. The average salary of someone with a high school degree is $35,356. There’s a big difference, and as each raise you receive tends to be based on the amount you earned before, the salary gap tends to grow rather than shrink over time.
You can see that in these numbers: According to the Georgetown College Payoff Report, a Bachelor’s degree is worth $2.8 million over a lifetime, which is more than twice a high school degree ($1.3 million). An Associate’s, or two-year, degree (the cost of which runs around $16,000 on average at a community college) is worth $1.7 million.
The days in which you simply enrolled in the best-ranking college that accepted you are over. More than ever, college is a value proposition. Minimizing the amount of student debt you take on gives you a leg up on building a life when you get out. That means casting a wide net in the application process and including schools likely to see you as someone who would be a big asset to the student body (and offer you money as a result). |
/* This file is part of the KDE project
* Copyright (C) 2012 Pierre Stirnweiss <[email protected]>
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Library General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Library General Public License for more details.
*
* You should have received a copy of the GNU Library General Public License
* along with this library; see the file COPYING.LIB. If not, write to
* the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
* Boston, MA 02110-1301, USA.
*/
#ifndef STYLESFILTEREDMODELBASE_H
#define STYLESFILTEREDMODELBASE_H
#include "AbstractStylesModel.h"
#include <QVector>
/** This class serves as a base for filtering an @class AbstractStylesmodel. The base class implements a one to one mapping of the model.
* Reimplementing the method createMapping is sufficient for basic sorting/filtering.
*
* QSortFilterProxyModel implementation was a great source of inspiration.
*
* It is to be noted that this is in no way a full proxyModel. It is built with several assumptions:
* - it is used to filter a StylesModel which in turn is a flat list of items. There is only one level of items. (this also means that "parent" QModelIndexes are always invalid)
* - there is no header in the model.
* - the model has only one column
* - only the following methods are used when updating the underlying model's data: resetModel, insertRows, moveRows, removeRows (cf QAbstractItemModel)
*/
class StylesFilteredModelBase : public AbstractStylesModel
{
Q_OBJECT
public:
explicit StylesFilteredModelBase(QObject *parent = 0);
/** Re-implement from QAbstractItemModel. */
virtual QModelIndex index(int row, int column=0, const QModelIndex &parent = QModelIndex()) const;
virtual QModelIndex parent(const QModelIndex &child) const;
virtual int columnCount(const QModelIndex &parent) const;
virtual int rowCount(const QModelIndex &parent) const;
virtual QVariant data(const QModelIndex &index, int role) const;
virtual Qt::ItemFlags flags(const QModelIndex &index) const;
/** Specific methods of the AbstractStylesModel */
/** Sets the @class KoStyleThumbnailer of the model. It is required that a @param thumbnailer is set before using the model. */
virtual void setStyleThumbnailer(KoStyleThumbnailer *thumbnailer);
/** Return a @class QModelIndex for the specified @param style.
* @param style may be either a character or paragraph style.
*/
virtual QModelIndex indexOf(const KoCharacterStyle &style) const;
/** Returns a QImage which is a preview of the style specified by @param row of the given @param size.
* If size isn't specified, the default size of the given @class KoStyleThumbnailer is used.
*/
virtual QImage stylePreview(int row, QSize size = QSize());
// virtual QImage stylePreview(QModelIndex &index, QSize size = QSize());
virtual AbstractStylesModel::Type stylesType() const;
/** Specific methods of the StylesFiltermodelBase */
/** Sets the sourceModel. Setting the model will trigger the mapping.
*/
void setStylesModel(AbstractStylesModel *sourceModel);
protected slots:
void modelAboutToBeReset();
void modelReset();
void rowsAboutToBeInserted(const QModelIndex &parent, int start, int end);
void rowsAboutToBeMoved(const QModelIndex &sourceParent, int sourceStart, int sourceEnd, const QModelIndex &destinationParent, int destinationRow);
void rowsAboutToBeRemoved(const QModelIndex &parent, int start, int end);
void rowsInserted(const QModelIndex &parent, int start, int end);
void rowsMoved(const QModelIndex &sourceParent, int sourceStart, int sourceEnd, const QModelIndex &destinationParent, int destinationRow);
void rowsRemoved(const QModelIndex &parent, int start, int end);
protected:
virtual void createMapping();
AbstractStylesModel *m_sourceModel;
QVector<int> m_sourceToProxy;
QVector<int> m_proxyToSource;
};
#endif // STYLESFILTEREDMODELBASE_H
|
A mistake in your past should not follow you for the rest of your life. If you were convicted of a misdemeanor or felony it may cause you to miss out on job opportunities, loans or licenses. Depending on the circumstances you can expunge your record, even reducing felonies to misdemeanors. Don’t let your past control your future, call the law firm of Bowman & Associates, APC in Sacramento for a Free Consultation to discuss cleaning up your record and moving on to a productive future.
In California, Penal Code Section 1203.4 allows a person to have certain criminal convictions expunged or removed from their record. In addition, some felony convictions can be reduced pursuant to Penal Code Section 17b from a felony to a misdemeanor prior to expungement. Why keep these criminal convictions on your record if you can do something about it? Call our offices now and we can help you restore your rights and repair your past.
At the Sacramento County Criminal Defense firm of Bowman & Associates, APC, we can help people in the process of clearing their record and restoring their good name. We can help you get the confidence to apply for the job you may not otherwise be eligible to apply for. To get the loan you may previously been denied. To earn the professional license that has evaded you. What do you have to lose?
Please contact our Sacramento Criminal Law Firm to find if your criminal record can be expunged.
ARE YOU IN NEED OF A RECORD EXPUNGEMENT ATTORNEY? |
#!coding=utf-8
from __future__ import unicode_literals
import time
import copy
import mongua
def timestamp():
return int(time.time())
def next_id(name):
query = {
'name': name,
}
update = {
'$inc': {
'seq': 1,
},
}
kwargs = {
'query': query,
'update': update,
'upsert': True,
'new': True,
}
doc = mongua.db['data_id']
new_id = doc.find_and_modify(**kwargs).get('seq')
return new_id
class MongoMixin(object):
__fields__ = [
'_id',
# (字段，类型，值）
('id', int, -1),
('type', str, ''),
('_deleted', bool, False),
('created_time', int, 0),
('updated_time', int, 0),
]
def __str__(self):
return unicode(self)
def __repr__(self):
return unicode(self)
def __unicode__(self):
class_name = self.__class__.__name__
properties = (u'{0} = {1}'.format(k, v) for k, v in self.__dict__.items())
return u'<{0}: \n {1}\n>'.format(class_name, u'\n '.join(properties))
def mongos(self, name):
return mongua.db[name].find()
def bson(self):
_dict = self.__dict__.copy()
d = {k: v for k, v in _dict.items() if k != '_sa_instance_state' or not isinstance(v, dict)}
return d
@classmethod
def has(cls, **kwargs):
"""
检查一个元素是否在数据库中 用法如下
User.has(id=1)
"""
return cls.find_one(**kwargs) is not None
@classmethod
def new(cls, form=None, **kwargs):
"""
new 是给外部使用的函数
"""
name = cls.__name__
# 创建一个空对象
m = cls()
fields = copy.copy(cls.__fields__)
# 去掉 _id 这个特殊的字段
fields.remove('_id')
if form is None:
form = {}
for f in fields:
k, t, v = f
if k in form:
setattr(m, k, t(form[k]))
else:
# 设置默认值
setattr(m, k, v)
# 处理额外的参数 kwargs
for k, v in kwargs.items():
if hasattr(m, k):
setattr(m, k, v)
else:
raise KeyError
# 写入默认数据
m.id = next_id(name)
ts = timestamp()
m.created_time = ts
m.updated_time = ts
m.deleted = False
m.type = name.lower()
# 特殊 model 的自定义设置
# m._setup(form)
m.save()
return m
@classmethod
def _new_with_bson(cls, bson):
"""
这是给内部 all 这种函数使用的函数
从 mongo 数据中恢复一个 model
"""
m = cls()
for k, v in bson.items():
setattr(m, k, v)
# FIXME, 因为现在的数据课里面未必有 type
# 所以在这里强行加上
# 以后洗掉db的数据后应该删掉这一句
m.type = cls.__name__.lower()
return m
@classmethod
def all(cls):
"""
mongo 数据查询
"""
name = cls.__name__
ds = mongua.db[name].find()
l = [cls._new_with_bson(d) for d in ds]
return l
# TODO, 还应该有一个函数 find(name, **kwargs)
@classmethod
def find(cls, **kwargs):
"""
mongo 数据查询
"""
raw = cls.find_raw(**kwargs)
l = map(lambda d: cls._new_with_bson(d), raw)
return l
@classmethod
def find_raw(cls, **kwargs):
name = cls.__name__
transform_dict = {
d[0]: d[1]
for d in cls.__fields__
}
for k, v in kwargs.items():
kwargs[k] = transform_dict[k](v)
ds = mongua.db[name].find(kwargs)
l = [d for d in ds]
return l
@classmethod
def find_one(cls, **kwargs):
l = cls.find(**kwargs)
if len(l) > 0:
return l[0]
else:
return None
@classmethod
def get(cls, id):
return cls.find_one(id=id)
@classmethod
def upsert(cls, query_form, update_form, hard=False):
ms = cls.find_one(**query_form)
if ms is None:
query_form.update(**update_form)
ms = cls.new(query_form)
else:
ms.update(update_form, hard=hard)
return ms
def update(self, form, hard=False):
for k, v in form.items():
if hard or hasattr(self, k):
setattr(self, k, v)
self.save()
def save(self):
# return mongua.db[name].find()
name = self.__class__.__name__
mongua.db[name].save(self.__dict__)
def delete(self):
self._deleted = True
self.save()
def blacklist(self):
b = [
'_id',
]
return b
def json(self):
_dict = self.__dict__
d = {k: v for k, v in _dict.items() if k not in self.blacklist()}
# TODO, 增加一个 type 属性
return d
|
**This property is available for stays as short as 2 nights. Special fall pricing* (see below) Please inquire for more information and to book.
New to the 2018 rental market ! This lovely contemporary vacation rental condo is a Saturday to Saturday rental**. Located on 34 acres within the Village of Rockport condominium community, there are numerous hiking and walking trails, a pool and pool house with workout room, grill area and much shared outdoor common space.
Fees include: 9% lodging tax, 10% service fee, $90 cleaning fee and either damage protection insurance or security deposit.
All linens (bedding and towels); starter supplies (soaps, paper products); and a fully stocked kitchen (dishes, cookware, utensils) are included.
Tranquility offers easy, gracious living with contemporary elegant style. This top floor, one level condo with easy elevator access offers an open floor plan with cathedral ceilings, high end light fixtures and plantation shutters. The kitchen with its granite countertops, stainless appliances, large island with bar stools and reclaimed Maine barnwood dining table, offers a perfect setting for entertaining. Off the dining area are french doors leading to a covered deck overlooking the shared lawn.
Master bedroom includes a queen bed and ensuite bathroom with shower. Guest bedroom has a queen bed and ensuite bathroom with shower.
Conveniently located close to harbors in Rockport, Camden and Rockland, as well as great restaurants, golfing, opera houses, hiking trails and hospital. |
<!DOCTYPE html>
<html>
<head>
<title>CSS Position Rules</title>
<style type="text/css">
body {
font-size: 25px;
}
div {
border: 1px solid red;
background-color: white;
}
.parent {
position: absolute;
top: 100px;
left: 200px;
height: 600px;
width: 700px;
}
.relative {
position: relative;
left: 20px;
}
.absolute {
position: absolute;
left: 400px;
top: 50px;
}
.absolute-scroll {
position: absolute;
left: 120px;
top: 130px;
height: 450px;
width: 500px;
overflow: scroll;
}
.absolute-inner {
position: absolute;
right: 20px;
bottom: 20px;
vertical-align: bottom;
height: 100px;
}
.fixed {
position: fixed;
top: 50px;
right: 10px;
}
</style>
</head>
<body>
<div class="parent">
absolute positioned<br />
<br />
<div class="relative">
relative positioned<br />
notice the width! it is because default width is 100% of parent element<br />
</div>
<div class="absolute">
absolute positioned
</div>
<div class="absolute-scroll">
absolute positioned, scrolled<br />
width and height are specified by css<br />
<br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br />
<div class="absolute-inner">absolute positioned</div>
</div>
<div class="fixed">
fixed position<br />
This element is fixed in the SCREEN, not the parent element
</div>
</div>
<br /><br /><br /><br />
notice this text!<br />
in code appears <br />
after the divs<br />
<br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br />
<a href="http://www.barelyfitz.com/screencast/html-training/css/positioning/" title="css positioning">Link to very good demonstration of positioning and floating</a><br />
<br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br />
Some text to make the browser show scrollers
</body>
</html> |
/**
* InternalApiErrorReason.java
*
* This file was auto-generated from WSDL
* by the Apache Axis 1.4 Apr 22, 2006 (06:55:48 PDT) WSDL2Java emitter.
*/
package com.google.api.ads.dfp.v201308;
public class InternalApiErrorReason implements java.io.Serializable {
private java.lang.String _value_;
private static java.util.HashMap _table_ = new java.util.HashMap();
// Constructor
protected InternalApiErrorReason(java.lang.String value) {
_value_ = value;
_table_.put(_value_,this);
}
public static final java.lang.String _UNEXPECTED_INTERNAL_API_ERROR = "UNEXPECTED_INTERNAL_API_ERROR";
public static final java.lang.String _UNKNOWN = "UNKNOWN";
public static final java.lang.String _DOWNTIME = "DOWNTIME";
public static final InternalApiErrorReason UNEXPECTED_INTERNAL_API_ERROR = new InternalApiErrorReason(_UNEXPECTED_INTERNAL_API_ERROR);
public static final InternalApiErrorReason UNKNOWN = new InternalApiErrorReason(_UNKNOWN);
public static final InternalApiErrorReason DOWNTIME = new InternalApiErrorReason(_DOWNTIME);
public java.lang.String getValue() { return _value_;}
public static InternalApiErrorReason fromValue(java.lang.String value)
throws java.lang.IllegalArgumentException {
InternalApiErrorReason enumeration = (InternalApiErrorReason)
_table_.get(value);
if (enumeration==null) throw new java.lang.IllegalArgumentException();
return enumeration;
}
public static InternalApiErrorReason fromString(java.lang.String value)
throws java.lang.IllegalArgumentException {
return fromValue(value);
}
public boolean equals(java.lang.Object obj) {return (obj == this);}
public int hashCode() { return toString().hashCode();}
public java.lang.String toString() { return _value_;}
public java.lang.Object readResolve() throws java.io.ObjectStreamException { return fromValue(_value_);}
public static org.apache.axis.encoding.Serializer getSerializer(
java.lang.String mechType,
java.lang.Class _javaType,
javax.xml.namespace.QName _xmlType) {
return
new org.apache.axis.encoding.ser.EnumSerializer(
_javaType, _xmlType);
}
public static org.apache.axis.encoding.Deserializer getDeserializer(
java.lang.String mechType,
java.lang.Class _javaType,
javax.xml.namespace.QName _xmlType) {
return
new org.apache.axis.encoding.ser.EnumDeserializer(
_javaType, _xmlType);
}
// Type metadata
private static org.apache.axis.description.TypeDesc typeDesc =
new org.apache.axis.description.TypeDesc(InternalApiErrorReason.class);
static {
typeDesc.setXmlType(new javax.xml.namespace.QName("https://www.google.com/apis/ads/publisher/v201308", "InternalApiError.Reason"));
}
/**
* Return type metadata object
*/
public static org.apache.axis.description.TypeDesc getTypeDesc() {
return typeDesc;
}
}
|
In Part 2 of our 4-part Special Report, our resident presidential scholar David Gewirtz (who wrote the book on White House email) explores why a large part of the story will always be missing from the record books.
In honor of the Presidential Center dedication, ZDNet Government is proud to present Part 2 of our exclusive, 4-part in-depth special report on the George W. Bush Presidential Center and the 200 million email archive project.
I was recently asked in a radio interview about whether or not the 200 million message email trove being archived is really that large. That number can be interpreted in different ways. To archivists, 200 million messages is a tremendous number of documents. To most IT professionals, that's a drop in the bucket for a medium-sized enterprise.
There are about 200 million messages that the archivists are dealing with, which is roughly 80 terabytes. That's not a small amount of data. But when you consider that most IT operations dealing with anything resembling Big Data are looking in the multi-petabyte quantities, it's far from unmanageable.
It's just not really that many bits and bytes. You could actually load all of these messages into RAM and process them in real-time using something like SAP's HANA product. So, from a technical point of view, the Bush message archive isn't exactly a large data structure.
But, from an archivist's point of view, it's huge because the archivists want to go through every single message and redact anything that is still considered a national security issue or a thorny political issue.
Think about 200 million messages. If you don't explore solving the problem using machine-based analysis, but instead expect individual humans in the National Archives and Records Agency to look at every single email message, it could be the end of time before they finish their work.
From a technical point of view, managing White House email is really a pretty simple thing. But, from a policy point of view, it's a very difficult thing. In my book and the various speeches I've given on this topic in D.C., I've always made it clear that archiving is a technical process, where retrieving what's been archived is a policy process.
In other words, it's up to us techies to make sure the data can be saved. But whether or not anyone gets to see that saved data has to be determined by laws, judges, and — courtesy of the Presidential Records Act — current and former presidents and vice presidents.
Quite obviously, not all email data is constrained by national security. Much of the data stored is also political in nature. That information may be suitable for safe public viewing from a national security perspective, but politically charged all the same.
That's where the push and pull has come from with White House email — because of that difference. Of course, the weird thing is that most recent White House generations have claimed that solving the archiving challenge is a technical problem. Clearly that's not the case.
From an IT geek perspective, email archiving is an activity that we do across enterprises every day. But from a "What do we want to show? How do we want to show it? How do we want to control our messaging?" perspective, it's a much bigger problem.
Even though the collection of 200 million email messages being archived is a boon for historians, it's far from the whole story.
Because I did so much research into the Bush administration email operation, I'm very well aware that those 200 million messages only represent a portion of the email traffic that went on during the Bush White House. The messages being discussed are only the official emails that went through the EOP (Executive Office of the President) email channels.
President Bush's team operated another email operation, based around the GWB43.com domain name. This operation wasn't run by the White House. Instead, it was run by an ISP located down in Chattanooga, Tennessee. While some conspiracy theorists might think that using GWB43 was a way for the Bushies to get around email requirements, the opposite was actually the truth.
There's a 1939 law, called the Hatch Act, that governs how White House email works. Yep, a law enacted way before anyone even knew of email controls email in the most important office of the land.
In any case, the Hatch Act restricts government officials from using government resources to conduct political activities. This means any sort of communication about politics, campaigns, political strategy, and so on could not be conducted through official White House channels and were required — by law — to run through outside services, like our friends in Chattanooga.
Because of this, using what then Deputy Press Secretary Dana Perino called "an abundance of caution," any email message, official or not, that might have had a political tinge, was not routed through the EOP email servers, but instead was routed through GWB43.
None of these official emails, the ones that also contained political information, are available for archiving. In Where Have All The Emails Gone, I estimated that 103.6 million messages ran over the open Internet, through GWB43.com. None of these will be turned over to the archivists.
That means that the historical record being turned over to the archivists is missing a full third of the story.
I've always wanted to ensure that this very large (and completely undocumented collection of political messages) are also made available to the public, but they may well be lost to time.
Adding to the problem is the fact that many White House staffers had multiple email accounts. For example, then Deputy Chief of Staff Karl Rove had a GWB43.com account, which was the domain used for the political arm of the White House operations. He also had an AOL account.
He would use each of those for different things. As you might imagine, most individuals had their own personal accounts, accounts for their work as political operators, and accounts for their work as public servants.
But let's just forget those hundred million or so political messages. Everyone else certainly has. Let's instead focus on what's involved in processing the 200 million messages that the Bush Presidential Center is willing to make available.
Next week in Part 3 of our Special Report: Hand-processing 200 million emails and how modern analytics techniques could provide innovative new applications for presidential email. |
Powered by PukiWiki Plus! 1.4.7plus-u2-i18n/PHP 7.1.27. HTML convert time to 0.090 sec. |
Wicked Football is part of a sports related menu cover collection. This heatsealed collection includes a basketball, soccerball, football, and baseball. These pieces are designed for multiple inserts. The decoration is a foil deboss. |
Where Is The New 20 Questions You Now Have That Eliminate Credits?? I Know You Know Im Asking This... So Why Dont You Want To Release It??? Chicken??
U WERE SO QUICK TO JUMP ON HERE AND TOUT THE NEW VIMOLIVE... WHERE U GO?? NO TALK WHEN NEGITIVE QUESTIONS COME UP??
I'm not sure that VIMO is under any obligation to release the questions, to do so would definitely help any competitor in the making... That said, it could be a wise thing to generally say what they screen for.
Bottom line, if you make money with the leads, work them. If you don't make money, don't work them. It's all a matter of what you are looking for in life. Personally, I've significantly slowed down on internet leads, probably stop them all together in the next month. I've learned I hate working them, and would rather put my efforts elsewhere (helps that I focus on P&C). The live transfers are interesting, but my phone rings more than I can answer it now anyways (not all with new clients, unfortunately).
My guess is you can call your VIMO rep and ask what types of things they screen for. If they answer the question to your satisfaction, you can up your bid. If not, you can decrease it. Pretty simple.
Mr. VIMO on this site (I think it's Scott O.) is a good guy. How do I know? By where he earned his undergraduate degree.
TO VIMO.... RELEASE THE QUESTIONS... U OWE IT TO US IF YOU ARE GONNA TAKE AWAY OUR RIGHTS OF CREDIT!!!!
Bottom line is VIMO has to make a buck here as well. While people want the right to have credits, these add to the costs for the lead provider, they do not get the credit back, so they have to pass the cost back to you in turn with a higher per lead cost. I agree though, that a bum lead is a bum lead. Where do you draw the line? Especially with live transfers. It's tough.
That said, I probably don't return half of the internet leads that I could return, which is why I'm stepping away from internet leads as a source for me for a while. To many other things happening.
Likely Vimo has been pummeled with requests for credits. I think what it's gonna come down to is you can make money from the transfers or you can't.
As I posted before, if you put an ad out that cost $500 and you netted $1,500 (returned $2,000 gross) and your phone simply rang would you run the ad again?
Well, that's a personal question. Some agents would say no - they can return more than $2,000 for $500 spent. Other agents would think that's ok to just have your phone ring without messing with shared leads.
What you can't do is place that $500 ad then call up your advertiser every time you get a bad lead. Vimo's probably going mental with agents who really don't get it and try to return basically every lead they don't close.
I'm for Vimo on this one - you set the bid - which means by default you can't pay more than you're willing for a lead. If you get the transfer it's yours - get over it. You can't handle that kind of action? No problem, but don't complain about it.
2. Are always very anxious to speak to an agent.
3. Will always pick up the telephone on the first ring.
5. Always able to afford the premiums.
6. Most of them are woefully underinsured.
7. Are built like an Ethiopian runway model.
8. Have never been within 4 miles of a cigarette.
9. Teach aerobics on the weekends.
10. Never had a day’s illness in their lives.
11. Have a positive view of insurance companies.
12. Are never too busy to set up an appointment.
13. Always know the social security numbers of their kids.
14. Absolutely love bank drafts.
15. Have never received a lower quote than the one you give.
16. Know that discounts cards are a waste of money.
17. Know that limited benefit plans are a waste of money.
18. Their doctors are bound to be in the PPO network.
19. Are never pregnant when shopping for insurance.
20. Know exactly how much an average hospital stay cost.
So why worry about credits?
I would pay more for INTERNET Live Transfers than T.V. or RADIO - the quality of lead is night and day. I wonder if they would consider separate bids like Google does for Search vs. Content?
I personally think there is a balance on credits and there needs to be SOME credit provision. We took a call the other day that was screened for Diabetes but the first thing she tells us is she takes Insulin - would I get stuck with $30 to $60 for that call?
People lie during the screening and some screening is rough, every market and every carrier have various guidelines - you will never please every agent - therefore the best approach is to meet in the middle and have SOME form of credits.
A lot of lead companies that pulled credits lost all of their brokers and went back to credits. It is clearly a balance.
If they pull credits, in time they will go back to credits - it is how the business works.
You also might get a better forum interaction if you ask nicely and not so aggressive - I am not sure I would respond to this thread if this were my lead company. You are free to post as you wish - but calling a lead vendor "chicken" wouldn't make me respond.
And like a previous post - if you don't like what Vimo offers you can take your business elsewhere - it is really that simple.
John boy, you said you... and i quote, "I'm for Vimo on this one"... should we expect and other answer?? your the paid hack for these guys.... was it not you that said in a national email spam "SIMPLY AMAZING" and then alude to the fact you had sold or about to sell EVERY vimolive transfer you had gotten?? Do you expect us to believe that you are not a paid actor here?? I would expect nothing less than you singing their value... your income depends one it... remember this also... we already know based on your blog that you will prostitute yourself out for 25 bucks an hour with a 1000 minn. to preach to new agents how to sell..... have you ever heard the old saying, great players go into the hall of fame, avg players coach.... so coach.... how much vimolive paying you??
Now, I have never had a problem sitting at the high stakes no limit table... but no one eants to sit at the tables with someone dealing from the bottom of the deck... hope you dont catch a "hanger"
Vimo Attacks From The Cell Flank!! |
<?php
use yii\helpers\Html;
use yii\widgets\DetailView;
/* @var $this yii\web\View */
/* @var $model common\models\User */
$this->title = $model->getPublicIdentity();
$this->params['breadcrumbs'][] = ['label' => Yii::t('backend', 'Users'), 'url' => ['index']];
$this->params['breadcrumbs'][] = $this->title;
?>
<div class="user-view">
<p>
<?= Html::a(Yii::t('backend', 'Update'), ['update', 'id' => $model->id], ['class' => 'btn btn-primary']) ?>
<?= Html::a(Yii::t('backend', 'Delete'), ['delete', 'id' => $model->id], [
'class' => 'btn btn-danger',
'data' => [
'confirm' => Yii::t('backend', 'Are you sure you want to delete this item?'),
'method' => 'post',
],
]) ?>
</p>
<?= DetailView::widget([
'model' => $model,
'attributes' => [
'id',
'username',
'auth_key',
'password_reset_token',
'email:email',
'status',
'created_at:datetime',
'updated_at:datetime',
'logged_at:datetime',
],
]) ?>
</div>
|
/**************
* definitions *
**************/
/* faces */
/* colors */
/* mobile text sizes */
/* desktop text sizes */
/****************
* text elements *
****************/
.hero, .page-name {
color: #000;
font: 200 30pt "Palatino", "Garamond", serif; }
h1 {
color: #000;
font: 200 27pt "Palatino", "Garamond", serif; }
h2 {
color: #000;
font: 200 24pt "Palatino", "Garamond", serif; }
h3 {
color: #000;
font: 100 21pt "Palatino", "Garamond", serif; }
h4 {
color: #000;
font: 100 18pt "Palatino", "Garamond", serif;
font-style: italic; }
h5 {
color: #000;
font: 100 15pt "Palatino", "Garamond", serif;
font-style: italic; }
.text, ul {
color: #000;
font: lighter 13pt "Verdana", "Helvetica", "Arial", sans-serif; }
@media only screen and (min-width: 500px) {
.hero, .page-name {
font-size: 40pt; }
h1 {
font: 200 34pt "Palatino", "Garamond", serif; }
h2 {
font: 200 28pt "Palatino", "Garamond", serif; }
h3 {
font-size: 23pt; }
h4 {
font-size: 20pt; }
h5 {
font-size: 17pt; }
.text, ul {
font: lighter 13pt "Verdana", "Helvetica", "Arial", sans-serif; } }
/***************************
* other top-level elements *
***************************/
a {
color: #000;
text-decoration: underline; }
/*
* monospace and code snippets
*/
.highlighter-rouge {
color: #333;
font: heavier 13pt "Courier New", monospace;
background-color: #eee;
padding: 0px 3px 0px 3px; }
@media only screen and (min-width: 500px) {
.highlighter-rouge {
font: heavier 13pt "Courier New", monospace; } }
/*****************
* other elements *
*****************/
.caption {
color: #424242;
font: italic 10pt "Verdana", "Helvetica", "Arial", sans-serif; }
.footnote {
color: #000;
font: 100 10pt "Verdana", "Helvetica", "Arial", sans-serif; }
/*********
* layout *
*********/
.hanging-indent {
/* vvv hanging indentation css thanks to https://www.thesitewizard.com/css/hanging-indents.shtml */
padding-left: 20px;
text-indent: -20px;
/* ^^^ thanks to https://www.thesitewizard.com/css/hanging-indents.shtml */ }
.bordered-table, .bordered-table th, .bordered-table td {
border: 1px solid #999; }
.bordered-table {
border-collapse: collapse; }
.bordered-table th, .bordered-table td {
padding: 10px; }
.alternating-table tr:nth-child(even) {
background: #CCC; }
.alternating-table tr:nth-child(odd) {
background: #FFF; }
#page-content {
/* div containing everything after the header */
margin: 0px 50px 0px 50px;
/* put a 50 px margin on left and right edges, 0 on top/bottom */ }
/* 500 or below */
@media only screen and (max-width: 500px) {
#page-content {
/* div containing everything after the header */
margin: 0px;
/* on small devices, remove all margins */ } }
/*# sourceMappingURL=about.css.map */
|
package org.simpleim.common.message;
public class LoginNotification extends Notification {
private String newUserId;
public String getNewUserId() {
return newUserId;
}
public LoginNotification setNewUserId(String newUserId) {
this.newUserId = newUserId;
return this;
}
}
|
'use strict';
Object.defineProperty(exports, '__esModule', { value: true });
function F() {
return false;
}
function T() {
return true;
}
function add(a, b) {
if (arguments.length === 1) return _b => add(a, _b);
return Number(a) + Number(b);
}
function curry(fn, args = []) {
return (..._args) => (rest => rest.length >= fn.length ? fn(...rest) : curry(fn, rest))([...args, ..._args]);
}
function adjustFn(index, replaceFn, list) {
const actualIndex = index < 0 ? list.length + index : index;
if (index >= list.length || actualIndex < 0) return list;
const clone = list.slice();
clone[actualIndex] = replaceFn(clone[actualIndex]);
return clone;
}
const adjust = curry(adjustFn);
function all(predicate, list) {
if (arguments.length === 1) return _list => all(predicate, _list);
for (let i = 0; i < list.length; i++) {
if (!predicate(list[i])) return false;
}
return true;
}
function allPass(predicates) {
return input => {
let counter = 0;
while (counter < predicates.length) {
if (!predicates[counter](input)) {
return false;
}
counter++;
}
return true;
};
}
function always(x) {
return () => x;
}
function and(a, b) {
if (arguments.length === 1) return _b => and(a, _b);
return a && b;
}
function any(predicate, list) {
if (arguments.length === 1) return _list => any(predicate, _list);
let counter = 0;
while (counter < list.length) {
if (predicate(list[counter], counter)) {
return true;
}
counter++;
}
return false;
}
function anyPass(predicates) {
return input => {
let counter = 0;
while (counter < predicates.length) {
if (predicates[counter](input)) {
return true;
}
counter++;
}
return false;
};
}
function append(x, input) {
if (arguments.length === 1) return _input => append(x, _input);
if (typeof input === 'string') return input.split('').concat(x);
const clone = input.slice();
clone.push(x);
return clone;
}
const _isArray = Array.isArray;
function __findHighestArity(spec, max = 0) {
for (const key in spec) {
if (spec.hasOwnProperty(key) === false || key === 'constructor') continue;
if (typeof spec[key] === 'object') {
max = Math.max(max, __findHighestArity(spec[key]));
}
if (typeof spec[key] === 'function') {
max = Math.max(max, spec[key].length);
}
}
return max;
}
function __filterUndefined() {
const defined = [];
let i = 0;
const l = arguments.length;
while (i < l) {
if (typeof arguments[i] === 'undefined') break;
defined[i] = arguments[i];
i++;
}
return defined;
}
function __applySpecWithArity(spec, arity, cache) {
const remaining = arity - cache.length;
if (remaining === 1) return x => __applySpecWithArity(spec, arity, __filterUndefined(...cache, x));
if (remaining === 2) return (x, y) => __applySpecWithArity(spec, arity, __filterUndefined(...cache, x, y));
if (remaining === 3) return (x, y, z) => __applySpecWithArity(spec, arity, __filterUndefined(...cache, x, y, z));
if (remaining === 4) return (x, y, z, a) => __applySpecWithArity(spec, arity, __filterUndefined(...cache, x, y, z, a));
if (remaining > 4) return (...args) => __applySpecWithArity(spec, arity, __filterUndefined(...cache, ...args));
if (_isArray(spec)) {
const ret = [];
let i = 0;
const l = spec.length;
for (; i < l; i++) {
if (typeof spec[i] === 'object' || _isArray(spec[i])) {
ret[i] = __applySpecWithArity(spec[i], arity, cache);
}
if (typeof spec[i] === 'function') {
ret[i] = spec[i](...cache);
}
}
return ret;
}
const ret = {};
for (const key in spec) {
if (spec.hasOwnProperty(key) === false || key === 'constructor') continue;
if (typeof spec[key] === 'object') {
ret[key] = __applySpecWithArity(spec[key], arity, cache);
continue;
}
if (typeof spec[key] === 'function') {
ret[key] = spec[key](...cache);
}
}
return ret;
}
function applySpec(spec, ...args) {
const arity = __findHighestArity(spec);
if (arity === 0) {
return () => ({});
}
const toReturn = __applySpecWithArity(spec, arity, args);
return toReturn;
}
function assocFn(prop, newValue, obj) {
return Object.assign({}, obj, {
[prop]: newValue
});
}
const assoc = curry(assocFn);
function _isInteger(n) {
return n << 0 === n;
}
var _isInteger$1 = Number.isInteger || _isInteger;
function assocPathFn(path, newValue, input) {
const pathArrValue = typeof path === 'string' ? path.split('.').map(x => _isInteger(Number(x)) ? Number(x) : x) : path;
if (pathArrValue.length === 0) {
return newValue;
}
const index = pathArrValue[0];
if (pathArrValue.length > 1) {
const condition = typeof input !== 'object' || input === null || !input.hasOwnProperty(index);
const nextinput = condition ? _isInteger(pathArrValue[1]) ? [] : {} : input[index];
newValue = assocPathFn(Array.prototype.slice.call(pathArrValue, 1), newValue, nextinput);
}
if (_isInteger(index) && _isArray(input)) {
const arr = input.slice();
arr[index] = newValue;
return arr;
}
return assoc(index, newValue, input);
}
const assocPath = curry(assocPathFn);
function both(f, g) {
if (arguments.length === 1) return _g => both(f, _g);
return (...input) => f(...input) && g(...input);
}
function chain(fn, list) {
if (arguments.length === 1) {
return _list => chain(fn, _list);
}
return [].concat(...list.map(fn));
}
function clampFn(min, max, input) {
if (min > max) {
throw new Error('min must not be greater than max in clamp(min, max, value)');
}
if (input >= min && input <= max) return input;
if (input > max) return max;
if (input < min) return min;
}
const clamp = curry(clampFn);
function clone(input) {
const out = _isArray(input) ? Array(input.length) : {};
if (input && input.getTime) return new Date(input.getTime());
for (const key in input) {
const v = input[key];
out[key] = typeof v === 'object' && v !== null ? v.getTime ? new Date(v.getTime()) : clone(v) : v;
}
return out;
}
function complement(fn) {
return (...input) => !fn(...input);
}
function compose(...fns) {
if (fns.length === 0) {
throw new Error('compose requires at least one argument');
}
return (...args) => {
const list = fns.slice();
if (list.length > 0) {
const fn = list.pop();
let result = fn(...args);
while (list.length > 0) {
result = list.pop()(result);
}
return result;
}
};
}
function concat(x, y) {
if (arguments.length === 1) return _y => concat(x, _y);
return typeof x === 'string' ? `${x}${y}` : [...x, ...y];
}
function cond(conditions) {
return input => {
let done = false;
let toReturn;
conditions.forEach(([predicate, resultClosure]) => {
if (!done && predicate(input)) {
done = true;
toReturn = resultClosure(input);
}
});
return toReturn;
};
}
function _curryN(n, cache, fn) {
return function () {
let ci = 0;
let ai = 0;
const cl = cache.length;
const al = arguments.length;
const args = new Array(cl + al);
while (ci < cl) {
args[ci] = cache[ci];
ci++;
}
while (ai < al) {
args[cl + ai] = arguments[ai];
ai++;
}
const remaining = n - args.length;
return args.length >= n ? fn.apply(this, args) : _arity(remaining, _curryN(n, args, fn));
};
}
function _arity(n, fn) {
switch (n) {
case 0:
return function () {
return fn.apply(this, arguments);
};
case 1:
return function (_1) {
return fn.apply(this, arguments);
};
case 2:
return function (_1, _2) {
return fn.apply(this, arguments);
};
case 3:
return function (_1, _2, _3) {
return fn.apply(this, arguments);
};
case 4:
return function (_1, _2, _3, _4) {
return fn.apply(this, arguments);
};
case 5:
return function (_1, _2, _3, _4, _5) {
return fn.apply(this, arguments);
};
case 6:
return function (_1, _2, _3, _4, _5, _6) {
return fn.apply(this, arguments);
};
case 7:
return function (_1, _2, _3, _4, _5, _6, _7) {
return fn.apply(this, arguments);
};
case 8:
return function (_1, _2, _3, _4, _5, _6, _7, _8) {
return fn.apply(this, arguments);
};
case 9:
return function (_1, _2, _3, _4, _5, _6, _7, _8, _9) {
return fn.apply(this, arguments);
};
default:
return function (_1, _2, _3, _4, _5, _6, _7, _8, _9, _10) {
return fn.apply(this, arguments);
};
}
}
function curryN(n, fn) {
if (arguments.length === 1) return _fn => curryN(n, _fn);
if (n > 10) {
throw new Error('First argument to _arity must be a non-negative integer no greater than ten');
}
return _arity(n, _curryN(n, [], fn));
}
const _keys = Object.keys;
function mapArray(fn, list, isIndexed = false) {
let index = 0;
const willReturn = Array(list.length);
while (index < list.length) {
willReturn[index] = isIndexed ? fn(list[index], index) : fn(list[index]);
index++;
}
return willReturn;
}
function mapObject(fn, obj) {
let index = 0;
const keys = _keys(obj);
const len = keys.length;
const willReturn = {};
while (index < len) {
const key = keys[index];
willReturn[key] = fn(obj[key], key, obj);
index++;
}
return willReturn;
}
function map(fn, list) {
if (arguments.length === 1) return _list => map(fn, _list);
if (list === undefined) return [];
if (_isArray(list)) return mapArray(fn, list);
return mapObject(fn, list);
}
function max(x, y) {
if (arguments.length === 1) return _y => max(x, _y);
return y > x ? y : x;
}
function reduceFn(reducer, acc, list) {
if (!_isArray(list)) {
throw new TypeError('reduce: list must be array or iterable');
}
let index = 0;
const len = list.length;
while (index < len) {
acc = reducer(acc, list[index], index, list);
index++;
}
return acc;
}
const reduce = curry(reduceFn);
function converge(fn, transformers) {
if (arguments.length === 1) return _transformers => converge(fn, _transformers);
const highestArity = reduce((a, b) => max(a, b.length), 0, transformers);
return curryN(highestArity, function () {
return fn.apply(this, map(g => g.apply(this, arguments), transformers));
});
}
const dec = x => x - 1;
function isFalsy(input) {
return input === undefined || input === null || Number.isNaN(input) === true;
}
function defaultTo(defaultArgument, input) {
if (arguments.length === 1) {
return _input => defaultTo(defaultArgument, _input);
}
return isFalsy(input) ? defaultArgument : input;
}
function type(input) {
const typeOf = typeof input;
if (input === null) {
return 'Null';
} else if (input === undefined) {
return 'Undefined';
} else if (typeOf === 'boolean') {
return 'Boolean';
} else if (typeOf === 'number') {
return Number.isNaN(input) ? 'NaN' : 'Number';
} else if (typeOf === 'string') {
return 'String';
} else if (_isArray(input)) {
return 'Array';
} else if (typeOf === 'symbol') {
return 'Symbol';
} else if (input instanceof RegExp) {
return 'RegExp';
}
const asStr = input && input.toString ? input.toString() : '';
if (['true', 'false'].includes(asStr)) return 'Boolean';
if (!Number.isNaN(Number(asStr))) return 'Number';
if (asStr.startsWith('async')) return 'Async';
if (asStr === '[object Promise]') return 'Promise';
if (typeOf === 'function') return 'Function';
if (input instanceof String) return 'String';
return 'Object';
}
function parseError(maybeError) {
const typeofError = maybeError.__proto__.toString();
if (!['Error', 'TypeError'].includes(typeofError)) return [];
return [typeofError, maybeError.message];
}
function parseDate(maybeDate) {
if (!maybeDate.toDateString) return [false];
return [true, maybeDate.getTime()];
}
function parseRegex(maybeRegex) {
if (maybeRegex.constructor !== RegExp) return [false];
return [true, maybeRegex.toString()];
}
function equals(a, b) {
if (arguments.length === 1) return _b => equals(a, _b);
const aType = type(a);
if (aType !== type(b)) return false;
if (aType === 'Function') {
return a.name === undefined ? false : a.name === b.name;
}
if (['NaN', 'Undefined', 'Null'].includes(aType)) return true;
if (aType === 'Number') {
if (Object.is(-0, a) !== Object.is(-0, b)) return false;
return a.toString() === b.toString();
}
if (['String', 'Boolean'].includes(aType)) {
return a.toString() === b.toString();
}
if (aType === 'Array') {
const aClone = Array.from(a);
const bClone = Array.from(b);
if (aClone.toString() !== bClone.toString()) {
return false;
}
let loopArrayFlag = true;
aClone.forEach((aCloneInstance, aCloneIndex) => {
if (loopArrayFlag) {
if (aCloneInstance !== bClone[aCloneIndex] && !equals(aCloneInstance, bClone[aCloneIndex])) {
loopArrayFlag = false;
}
}
});
return loopArrayFlag;
}
const aRegex = parseRegex(a);
const bRegex = parseRegex(b);
if (aRegex[0]) {
return bRegex[0] ? aRegex[1] === bRegex[1] : false;
} else if (bRegex[0]) return false;
const aDate = parseDate(a);
const bDate = parseDate(b);
if (aDate[0]) {
return bDate[0] ? aDate[1] === bDate[1] : false;
} else if (bDate[0]) return false;
const aError = parseError(a);
const bError = parseError(b);
if (aError[0]) {
return bError[0] ? aError[0] === bError[0] && aError[1] === bError[1] : false;
}
if (aType === 'Object') {
const aKeys = Object.keys(a);
if (aKeys.length !== Object.keys(b).length) {
return false;
}
let loopObjectFlag = true;
aKeys.forEach(aKeyInstance => {
if (loopObjectFlag) {
const aValue = a[aKeyInstance];
const bValue = b[aKeyInstance];
if (aValue !== bValue && !equals(aValue, bValue)) {
loopObjectFlag = false;
}
}
});
return loopObjectFlag;
}
return false;
}
function includesArray(valueToFind, input) {
let index = -1;
while (++index < input.length) {
if (equals(input[index], valueToFind)) {
return true;
}
}
return false;
}
function includes(valueToFind, input) {
if (arguments.length === 1) return _input => includes(valueToFind, _input);
if (typeof input === 'string') {
return input.includes(valueToFind);
}
if (!input) {
throw new TypeError(`Cannot read property \'indexOf\' of ${input}`);
}
if (!_isArray(input)) return false;
return includesArray(valueToFind, input);
}
function uniq(list) {
let index = -1;
const willReturn = [];
while (++index < list.length) {
const value = list[index];
if (!includes(value, willReturn)) {
willReturn.push(value);
}
}
return willReturn;
}
function difference(a, b) {
if (arguments.length === 1) return _b => difference(a, _b);
return uniq(a).filter(aInstance => !includes(aInstance, b));
}
function dissoc(prop, obj) {
if (arguments.length === 1) return _obj => dissoc(prop, _obj);
if (obj === null || obj === undefined) return {};
const willReturn = {};
for (const p in obj) {
willReturn[p] = obj[p];
}
delete willReturn[prop];
return willReturn;
}
function divide(a, b) {
if (arguments.length === 1) return _b => divide(a, _b);
return a / b;
}
function drop(howManyToDrop, listOrString) {
if (arguments.length === 1) return _list => drop(howManyToDrop, _list);
return listOrString.slice(howManyToDrop > 0 ? howManyToDrop : 0);
}
function dropLast(howManyToDrop, listOrString) {
if (arguments.length === 1) {
return _listOrString => dropLast(howManyToDrop, _listOrString);
}
return howManyToDrop > 0 ? listOrString.slice(0, -howManyToDrop) : listOrString.slice();
}
function dropLastWhile(predicate, iterable) {
if (arguments.length === 1) {
return _iterable => dropLastWhile(predicate, _iterable);
}
if (iterable.length === 0) return iterable;
const isArray = _isArray(iterable);
if (typeof predicate !== 'function') {
throw new Error(`'predicate' is from wrong type ${typeof predicate}`);
}
if (!isArray && typeof iterable !== 'string') {
throw new Error(`'iterable' is from wrong type ${typeof iterable}`);
}
let found = false;
const toReturn = [];
let counter = iterable.length;
while (counter > 0) {
counter--;
if (!found && predicate(iterable[counter]) === false) {
found = true;
toReturn.push(iterable[counter]);
} else if (found) {
toReturn.push(iterable[counter]);
}
}
return isArray ? toReturn.reverse() : toReturn.reverse().join('');
}
function dropRepeats(list) {
if (!_isArray(list)) {
throw new Error(`${list} is not a list`);
}
const toReturn = [];
list.reduce((prev, current) => {
if (!equals(prev, current)) {
toReturn.push(current);
}
return current;
}, undefined);
return toReturn;
}
function dropRepeatsWith(predicate, list) {
if (arguments.length === 1) {
return _iterable => dropRepeatsWith(predicate, _iterable);
}
if (!_isArray(list)) {
throw new Error(`${list} is not a list`);
}
const toReturn = [];
list.reduce((prev, current) => {
if (prev === undefined) {
toReturn.push(current);
return current;
}
if (!predicate(prev, current)) {
toReturn.push(current);
}
return current;
}, undefined);
return toReturn;
}
function dropWhile(predicate, iterable) {
if (arguments.length === 1) {
return _iterable => dropWhile(predicate, _iterable);
}
const isArray = _isArray(iterable);
if (!isArray && typeof iterable !== 'string') {
throw new Error('`iterable` is neither list nor a string');
}
let flag = false;
const holder = [];
let counter = -1;
while (counter++ < iterable.length - 1) {
if (flag) {
holder.push(iterable[counter]);
} else if (!predicate(iterable[counter])) {
if (!flag) flag = true;
holder.push(iterable[counter]);
}
}
return isArray ? holder : holder.join('');
}
function either(firstPredicate, secondPredicate) {
if (arguments.length === 1) {
return _secondPredicate => either(firstPredicate, _secondPredicate);
}
return (...input) => Boolean(firstPredicate(...input) || secondPredicate(...input));
}
function endsWith(target, str) {
if (arguments.length === 1) return _str => endsWith(target, _str);
return str.endsWith(target);
}
function eqPropsFn(prop, obj1, obj2) {
if (!obj1 || !obj2) {
throw new Error('wrong object inputs are passed to R.eqProps');
}
return equals(obj1[prop], obj2[prop]);
}
const eqProps = curry(eqPropsFn);
function evolveArray(rules, list) {
return mapArray((x, i) => {
if (type(rules[i]) === 'Function') {
return rules[i](x);
}
return x;
}, list, true);
}
function evolveObject(rules, iterable) {
return mapObject((x, prop) => {
if (type(x) === 'Object') {
const typeRule = type(rules[prop]);
if (typeRule === 'Function') {
return rules[prop](x);
}
if (typeRule === 'Object') {
return evolve(rules[prop], x);
}
return x;
}
if (type(rules[prop]) === 'Function') {
return rules[prop](x);
}
return x;
}, iterable);
}
function evolve(rules, iterable) {
if (arguments.length === 1) {
return _iterable => evolve(rules, _iterable);
}
const rulesType = type(rules);
const iterableType = type(iterable);
if (iterableType !== rulesType) {
throw new Error('iterableType !== rulesType');
}
if (!['Object', 'Array'].includes(rulesType)) {
throw new Error(`'iterable' and 'rules' are from wrong type ${rulesType}`);
}
if (iterableType === 'Object') {
return evolveObject(rules, iterable);
}
return evolveArray(rules, iterable);
}
function filterObject(fn, obj) {
const willReturn = {};
for (const prop in obj) {
if (fn(obj[prop], prop, obj)) {
willReturn[prop] = obj[prop];
}
}
return willReturn;
}
function filterArray(predicate, list, indexed = false) {
let index = 0;
const len = list.length;
const willReturn = [];
while (index < len) {
const predicateResult = indexed ? predicate(list[index], index) : predicate(list[index]);
if (predicateResult) {
willReturn.push(list[index]);
}
index++;
}
return willReturn;
}
function filter(predicate, iterable) {
if (arguments.length === 1) {
return _iterable => filter(predicate, _iterable);
}
if (!iterable) return [];
if (_isArray(iterable)) return filterArray(predicate, iterable);
return filterObject(predicate, iterable);
}
function find(predicate, list) {
if (arguments.length === 1) return _list => find(predicate, _list);
let index = 0;
const len = list.length;
while (index < len) {
const x = list[index];
if (predicate(x)) {
return x;
}
index++;
}
}
function findIndex(predicate, list) {
if (arguments.length === 1) return _list => findIndex(predicate, _list);
const len = list.length;
let index = -1;
while (++index < len) {
if (predicate(list[index])) {
return index;
}
}
return -1;
}
function findLast(predicate, list) {
if (arguments.length === 1) return _list => findLast(predicate, _list);
let index = list.length;
while (--index >= 0) {
if (predicate(list[index])) {
return list[index];
}
}
return undefined;
}
function findLastIndex(fn, list) {
if (arguments.length === 1) return _list => findLastIndex(fn, _list);
let index = list.length;
while (--index >= 0) {
if (fn(list[index])) {
return index;
}
}
return -1;
}
function flatten(list, input) {
const willReturn = input === undefined ? [] : input;
for (let i = 0; i < list.length; i++) {
if (_isArray(list[i])) {
flatten(list[i], willReturn);
} else {
willReturn.push(list[i]);
}
}
return willReturn;
}
function flipFn(fn) {
return (...input) => {
if (input.length === 1) {
return holder => fn(holder, input[0]);
} else if (input.length === 2) {
return fn(input[1], input[0]);
} else if (input.length === 3) {
return fn(input[1], input[0], input[2]);
} else if (input.length === 4) {
return fn(input[1], input[0], input[2], input[3]);
}
throw new Error('R.flip doesn\'t work with arity > 4');
};
}
function flip(fn) {
return flipFn(fn);
}
function forEach(fn, list) {
if (arguments.length === 1) return _list => forEach(fn, _list);
if (list === undefined) {
return;
}
if (_isArray(list)) {
let index = 0;
const len = list.length;
while (index < len) {
fn(list[index]);
index++;
}
} else {
let index = 0;
const keys = _keys(list);
const len = keys.length;
while (index < len) {
const key = keys[index];
fn(list[key], key, list);
index++;
}
}
return list;
}
function fromPairs(listOfPairs) {
const toReturn = {};
listOfPairs.forEach(([prop, value]) => toReturn[prop] = value);
return toReturn;
}
function groupBy(groupFn, list) {
if (arguments.length === 1) return _list => groupBy(groupFn, _list);
const result = {};
for (let i = 0; i < list.length; i++) {
const item = list[i];
const key = groupFn(item);
if (!result[key]) {
result[key] = [];
}
result[key].push(item);
}
return result;
}
function groupWith(compareFn, list) {
if (!_isArray(list)) throw new TypeError('list.reduce is not a function');
const clone = list.slice();
if (list.length === 1) return [clone];
const toReturn = [];
let holder = [];
clone.reduce((prev, current, i) => {
if (i === 0) return current;
const okCompare = compareFn(prev, current);
const holderIsEmpty = holder.length === 0;
const lastCall = i === list.length - 1;
if (okCompare) {
if (holderIsEmpty) holder.push(prev);
holder.push(current);
if (lastCall) toReturn.push(holder);
return current;
}
if (holderIsEmpty) {
toReturn.push([prev]);
if (lastCall) toReturn.push([current]);
return current;
}
toReturn.push(holder);
if (lastCall) toReturn.push([current]);
holder = [];
return current;
}, undefined);
return toReturn;
}
function has(prop, obj) {
if (arguments.length === 1) return _obj => has(prop, _obj);
if (!obj) return false;
return obj.hasOwnProperty(prop);
}
function path(pathInput, obj) {
if (arguments.length === 1) return _obj => path(pathInput, _obj);
if (obj === null || obj === undefined) {
return undefined;
}
let willReturn = obj;
let counter = 0;
const pathArrValue = typeof pathInput === 'string' ? pathInput.split('.') : pathInput;
while (counter < pathArrValue.length) {
if (willReturn === null || willReturn === undefined) {
return undefined;
}
if (willReturn[pathArrValue[counter]] === null) return undefined;
willReturn = willReturn[pathArrValue[counter]];
counter++;
}
return willReturn;
}
function hasPath(maybePath, obj) {
if (arguments.length === 1) {
return objHolder => hasPath(maybePath, objHolder);
}
return path(maybePath, obj) !== undefined;
}
function head(listOrString) {
if (typeof listOrString === 'string') return listOrString[0] || '';
return listOrString[0];
}
function _objectIs(a, b) {
if (a === b) {
return a !== 0 || 1 / a === 1 / b;
}
return a !== a && b !== b;
}
var _objectIs$1 = Object.is || _objectIs;
function identical(a, b) {
if (arguments.length === 1) return _b => identical(a, _b);
return _objectIs$1(a, b);
}
function identity(input) {
return input;
}
function ifElseFn(condition, onTrue, onFalse) {
return (...input) => {
const conditionResult = typeof condition === 'boolean' ? condition : condition(...input);
if (conditionResult === true) {
return onTrue(...input);
}
return onFalse(...input);
};
}
const ifElse = curry(ifElseFn);
const inc = x => x + 1;
function indexByPath(pathInput, list) {
const toReturn = {};
for (let i = 0; i < list.length; i++) {
const item = list[i];
toReturn[path(pathInput, item)] = item;
}
return toReturn;
}
function indexBy(condition, list) {
if (arguments.length === 1) {
return _list => indexBy(condition, _list);
}
if (typeof condition === 'string') {
return indexByPath(condition, list);
}
const toReturn = {};
for (let i = 0; i < list.length; i++) {
const item = list[i];
toReturn[condition(item)] = item;
}
return toReturn;
}
function indexOf(valueToFind, list) {
if (arguments.length === 1) {
return _list => indexOf(valueToFind, _list);
}
let index = -1;
const {
length
} = list;
while (++index < length) {
if (list[index] === valueToFind) {
return index;
}
}
return -1;
}
function baseSlice(array, start, end) {
let index = -1;
let {
length
} = array;
end = end > length ? length : end;
if (end < 0) {
end += length;
}
length = start > end ? 0 : end - start >>> 0;
start >>>= 0;
const result = Array(length);
while (++index < length) {
result[index] = array[index + start];
}
return result;
}
function init(listOrString) {
if (typeof listOrString === 'string') return listOrString.slice(0, -1);
return listOrString.length ? baseSlice(listOrString, 0, -1) : [];
}
function intersection(listA, listB) {
if (arguments.length === 1) return _list => intersection(listA, _list);
return filter(x => includes(x, listA), listB);
}
function intersperse(separator, list) {
if (arguments.length === 1) return _list => intersperse(separator, _list);
let index = -1;
const len = list.length;
const willReturn = [];
while (++index < len) {
if (index === len - 1) {
willReturn.push(list[index]);
} else {
willReturn.push(list[index], separator);
}
}
return willReturn;
}
function is(targetPrototype, x) {
if (arguments.length === 1) return _x => is(targetPrototype, _x);
return x != null && x.constructor === targetPrototype || x instanceof targetPrototype;
}
function isEmpty(input) {
const inputType = type(input);
if (['Undefined', 'NaN', 'Number', 'Null'].includes(inputType)) return false;
if (!input) return true;
if (inputType === 'Object') {
return Object.keys(input).length === 0;
}
if (inputType === 'Array') {
return input.length === 0;
}
return false;
}
function isNil(x) {
return x === undefined || x === null;
}
function join(glue, list) {
if (arguments.length === 1) return _list => join(glue, _list);
return list.join(glue);
}
function keys(x) {
return Object.keys(x);
}
function last(listOrString) {
if (typeof listOrString === 'string') {
return listOrString[listOrString.length - 1] || '';
}
return listOrString[listOrString.length - 1];
}
function lastIndexOf(target, list) {
if (arguments.length === 1) return _list => lastIndexOf(target, _list);
let index = list.length;
while (--index > 0) {
if (equals(list[index], target)) {
return index;
}
}
return -1;
}
function length(x) {
if (!x && x !== '' || x.length === undefined) {
return NaN;
}
return x.length;
}
function lens(getter, setter) {
return function (functor) {
return function (target) {
return functor(getter(target)).map(focus => setter(focus, target));
};
};
}
function nth(index, list) {
if (arguments.length === 1) return _list => nth(index, _list);
const idx = index < 0 ? list.length + index : index;
return Object.prototype.toString.call(list) === '[object String]' ? list.charAt(idx) : list[idx];
}
function updateFn(index, newValue, list) {
const arrClone = list.slice();
return arrClone.fill(newValue, index, index + 1);
}
const update = curry(updateFn);
function lensIndex(index) {
return lens(nth(index), update(index));
}
function lensPath(key) {
return lens(path(key), assocPath(key));
}
function prop(propToFind, obj) {
if (arguments.length === 1) return _obj => prop(propToFind, _obj);
if (!obj) return undefined;
return obj[propToFind];
}
function lensProp(key) {
return lens(prop(key), assoc(key));
}
function match(pattern, input) {
if (arguments.length === 1) return _input => match(pattern, _input);
const willReturn = input.match(pattern);
return willReturn === null ? [] : willReturn;
}
function mathMod(x, y) {
if (arguments.length === 1) return _y => mathMod(x, _y);
if (!_isInteger$1(x) || !_isInteger$1(y) || y < 1) return NaN;
return (x % y + y) % y;
}
function maxByFn(compareFn, x, y) {
return compareFn(y) > compareFn(x) ? y : x;
}
const maxBy = curry(maxByFn);
function sum(list) {
return list.reduce((prev, current) => prev + current, 0);
}
function mean(list) {
return sum(list) / list.length;
}
function median(list) {
const len = list.length;
if (len === 0) return NaN;
const width = 2 - len % 2;
const idx = (len - width) / 2;
return mean(Array.prototype.slice.call(list, 0).sort((a, b) => {
if (a === b) return 0;
return a < b ? -1 : 1;
}).slice(idx, idx + width));
}
function merge(target, newProps) {
if (arguments.length === 1) return _newProps => merge(target, _newProps);
return Object.assign({}, target || {}, newProps || {});
}
function mergeAll(arr) {
let willReturn = {};
map(val => {
willReturn = merge(willReturn, val);
}, arr);
return willReturn;
}
function mergeDeepRight(target, source) {
if (arguments.length === 1) {
return sourceHolder => mergeDeepRight(target, sourceHolder);
}
const willReturn = JSON.parse(JSON.stringify(target));
Object.keys(source).forEach(key => {
if (type(source[key]) === 'Object') {
if (type(target[key]) === 'Object') {
willReturn[key] = mergeDeepRight(target[key], source[key]);
} else {
willReturn[key] = source[key];
}
} else {
willReturn[key] = source[key];
}
});
return willReturn;
}
function mergeLeft(x, y) {
if (arguments.length === 1) return _y => mergeLeft(x, _y);
return merge(y, x);
}
function min(x, y) {
if (arguments.length === 1) return _y => min(x, _y);
return y < x ? y : x;
}
function minByFn(compareFn, x, y) {
return compareFn(y) < compareFn(x) ? y : x;
}
const minBy = curry(minByFn);
function modulo(x, y) {
if (arguments.length === 1) return _y => modulo(x, _y);
return x % y;
}
function moveFn(fromIndex, toIndex, list) {
if (fromIndex < 0 || toIndex < 0) {
throw new Error('Rambda.move does not support negative indexes');
}
if (fromIndex > list.length - 1 || toIndex > list.length - 1) return list;
const clone = list.slice();
clone[fromIndex] = list[toIndex];
clone[toIndex] = list[fromIndex];
return clone;
}
const move = curry(moveFn);
function multiply(x, y) {
if (arguments.length === 1) return _y => multiply(x, _y);
return x * y;
}
function negate(x) {
return -x;
}
function none(predicate, list) {
if (arguments.length === 1) return _list => none(predicate, _list);
for (let i = 0; i < list.length; i++) {
if (!predicate(list[i])) return true;
}
return false;
}
function not(input) {
return !input;
}
function objOf(key, value) {
if (arguments.length === 1) {
return _value => objOf(key, _value);
}
return {
[key]: value
};
}
function of(value) {
return [value];
}
function omit(propsToOmit, obj) {
if (arguments.length === 1) return _obj => omit(propsToOmit, _obj);
if (obj === null || obj === undefined) {
return undefined;
}
const propsToOmitValue = typeof propsToOmit === 'string' ? propsToOmit.split(',') : propsToOmit;
const willReturn = {};
for (const key in obj) {
if (!propsToOmitValue.includes(key)) {
willReturn[key] = obj[key];
}
}
return willReturn;
}
function onceFn(fn, context) {
let result;
return function () {
if (fn) {
result = fn.apply(context || this, arguments);
fn = null;
}
return result;
};
}
function once(fn, context) {
if (arguments.length === 1) {
const wrap = onceFn(fn, context);
return curry(wrap);
}
return onceFn(fn, context);
}
function or(a, b) {
if (arguments.length === 1) return _b => or(a, _b);
return a || b;
}
const Identity = x => ({
x,
map: fn => Identity(fn(x))
});
function overFn(lens, fn, object) {
return lens(x => Identity(fn(x)))(object).x;
}
const over = curry(overFn);
function partial(fn, ...args) {
const len = fn.length;
return (...rest) => {
if (args.length + rest.length >= len) {
return fn(...args, ...rest);
}
return partial(fn, ...[...args, ...rest]);
};
}
function partitionObject(predicate, iterable) {
const yes = {};
const no = {};
Object.entries(iterable).forEach(([prop, value]) => {
if (predicate(value, prop)) {
yes[prop] = value;
} else {
no[prop] = value;
}
});
return [yes, no];
}
function partitionArray(predicate, list) {
const yes = [];
const no = [];
let counter = -1;
while (counter++ < list.length - 1) {
if (predicate(list[counter])) {
yes.push(list[counter]);
} else {
no.push(list[counter]);
}
}
return [yes, no];
}
function partition(predicate, iterable) {
if (arguments.length === 1) {
return listHolder => partition(predicate, listHolder);
}
if (!_isArray(iterable)) return partitionObject(predicate, iterable);
return partitionArray(predicate, iterable);
}
function pathEqFn(pathToSearch, target, input) {
return equals(path(pathToSearch, input), target);
}
const pathEq = curry(pathEqFn);
function pathOrFn(defaultValue, list, obj) {
return defaultTo(defaultValue, path(list, obj));
}
const pathOr = curry(pathOrFn);
function paths(pathsToSearch, obj) {
if (arguments.length === 1) {
return _obj => paths(pathsToSearch, _obj);
}
return pathsToSearch.map(singlePath => path(singlePath, obj));
}
function pick(propsToPick, input) {
if (arguments.length === 1) return _input => pick(propsToPick, _input);
if (input === null || input === undefined) {
return undefined;
}
const keys = typeof propsToPick === 'string' ? propsToPick.split(',') : propsToPick;
const willReturn = {};
let counter = 0;
while (counter < keys.length) {
if (keys[counter] in input) {
willReturn[keys[counter]] = input[keys[counter]];
}
counter++;
}
return willReturn;
}
function pickAll(propsToPick, obj) {
if (arguments.length === 1) return _obj => pickAll(propsToPick, _obj);
if (obj === null || obj === undefined) {
return undefined;
}
const keysValue = typeof propsToPick === 'string' ? propsToPick.split(',') : propsToPick;
const willReturn = {};
let counter = 0;
while (counter < keysValue.length) {
if (keysValue[counter] in obj) {
willReturn[keysValue[counter]] = obj[keysValue[counter]];
} else {
willReturn[keysValue[counter]] = undefined;
}
counter++;
}
return willReturn;
}
function pipe(...fns) {
if (fns.length === 0) throw new Error('pipe requires at least one argument');
return (...args) => {
const list = fns.slice();
if (list.length > 0) {
const fn = list.shift();
let result = fn(...args);
while (list.length > 0) {
result = list.shift()(result);
}
return result;
}
};
}
function pluck(property, list) {
if (arguments.length === 1) return _list => pluck(property, _list);
const willReturn = [];
map(x => {
if (x[property] !== undefined) {
willReturn.push(x[property]);
}
}, list);
return willReturn;
}
function prepend(x, input) {
if (arguments.length === 1) return _input => prepend(x, _input);
if (typeof input === 'string') return [x].concat(input.split(''));
return [x].concat(input);
}
const product = reduce(multiply, 1);
function propEqFn(propToFind, valueToMatch, obj) {
if (!obj) return false;
return obj[propToFind] === valueToMatch;
}
const propEq = curry(propEqFn);
function propIsFn(targetPrototype, property, obj) {
return is(targetPrototype, obj[property]);
}
const propIs = curry(propIsFn);
function propOrFn(defaultValue, property, obj) {
if (!obj) return defaultValue;
return defaultTo(defaultValue, obj[property]);
}
const propOr = curry(propOrFn);
function props(propsToPick, obj) {
if (arguments.length === 1) {
return _obj => props(propsToPick, _obj);
}
if (!_isArray(propsToPick)) {
throw new Error('propsToPick is not a list');
}
return mapArray(prop => obj[prop], propsToPick);
}
function range(start, end) {
if (arguments.length === 1) return _end => range(start, _end);
if (Number.isNaN(Number(start)) || Number.isNaN(Number(end))) {
throw new TypeError('Both arguments to range must be numbers');
}
if (end < start) return [];
const len = end - start;
const willReturn = Array(len);
for (let i = 0; i < len; i++) {
willReturn[i] = start + i;
}
return willReturn;
}
function reject(predicate, list) {
if (arguments.length === 1) return _list => reject(predicate, _list);
return filter(x => !predicate(x), list);
}
function repeat(x, timesToRepeat) {
if (arguments.length === 1) {
return _timesToRepeat => repeat(x, _timesToRepeat);
}
return Array(timesToRepeat).fill(x);
}
function replaceFn(pattern, replacer, str) {
return str.replace(pattern, replacer);
}
const replace = curry(replaceFn);
function reverse(listOrString) {
if (typeof listOrString === 'string') {
return listOrString.split('').reverse().join('');
}
const clone = listOrString.slice();
return clone.reverse();
}
function setFn(lens, replacer, x) {
return over(lens, always(replacer), x);
}
const set = curry(setFn);
function sliceFn(from, to, list) {
return list.slice(from, to);
}
const slice = curry(sliceFn);
function sort(sortFn, list) {
if (arguments.length === 1) return _list => sort(sortFn, _list);
const clone = list.slice();
return clone.sort(sortFn);
}
function sortBy(sortFn, list) {
if (arguments.length === 1) return _list => sortBy(sortFn, _list);
const clone = list.slice();
return clone.sort((a, b) => {
const aSortResult = sortFn(a);
const bSortResult = sortFn(b);
if (aSortResult === bSortResult) return 0;
return aSortResult < bSortResult ? -1 : 1;
});
}
function split(separator, str) {
if (arguments.length === 1) return _str => split(separator, _str);
return str.split(separator);
}
function maybe(ifRule, whenIf, whenElse) {
const whenIfInput = ifRule && type(whenIf) === 'Function' ? whenIf() : whenIf;
const whenElseInput = !ifRule && type(whenElse) === 'Function' ? whenElse() : whenElse;
return ifRule ? whenIfInput : whenElseInput;
}
function take(howMany, listOrString) {
if (arguments.length === 1) return _listOrString => take(howMany, _listOrString);
if (howMany < 0) return listOrString.slice();
if (typeof listOrString === 'string') return listOrString.slice(0, howMany);
return baseSlice(listOrString, 0, howMany);
}
function splitAt(index, input) {
if (arguments.length === 1) {
return _list => splitAt(index, _list);
}
if (!input) throw new TypeError(`Cannot read property 'slice' of ${input}`);
if (!_isArray(input) && typeof input !== 'string') return [[], []];
const correctIndex = maybe(index < 0, input.length + index < 0 ? 0 : input.length + index, index);
return [take(correctIndex, input), drop(correctIndex, input)];
}
function splitEvery(sliceLength, listOrString) {
if (arguments.length === 1) {
return _listOrString => splitEvery(sliceLength, _listOrString);
}
if (sliceLength < 1) {
throw new Error('First argument to splitEvery must be a positive integer');
}
const willReturn = [];
let counter = 0;
while (counter < listOrString.length) {
willReturn.push(listOrString.slice(counter, counter += sliceLength));
}
return willReturn;
}
function splitWhen(predicate, input) {
if (arguments.length === 1) {
return _input => splitWhen(predicate, _input);
}
if (!input) throw new TypeError(`Cannot read property 'length' of ${input}`);
const preFound = [];
const postFound = [];
let found = false;
let counter = -1;
while (counter++ < input.length - 1) {
if (found) {
postFound.push(input[counter]);
} else if (predicate(input[counter])) {
postFound.push(input[counter]);
found = true;
} else {
preFound.push(input[counter]);
}
}
return [preFound, postFound];
}
function startsWith(target, str) {
if (arguments.length === 1) return _str => startsWith(target, _str);
return str.startsWith(target);
}
function subtract(a, b) {
if (arguments.length === 1) return _b => subtract(a, _b);
return a - b;
}
function symmetricDifference(x, y) {
if (arguments.length === 1) {
return _y => symmetricDifference(x, _y);
}
return concat(filter(value => !includes(value, y), x), filter(value => !includes(value, x), y));
}
function tail(listOrString) {
return drop(1, listOrString);
}
function takeLast(howMany, listOrString) {
if (arguments.length === 1) return _listOrString => takeLast(howMany, _listOrString);
const len = listOrString.length;
if (howMany < 0) return listOrString.slice();
let numValue = howMany > len ? len : howMany;
if (typeof listOrString === 'string') return listOrString.slice(len - numValue);
numValue = len - numValue;
return baseSlice(listOrString, numValue, len);
}
function takeLastWhile(predicate, input) {
if (arguments.length === 1) {
return _input => takeLastWhile(predicate, _input);
}
if (input.length === 0) return input;
let found = false;
const toReturn = [];
let counter = input.length;
while (!found || counter === 0) {
counter--;
if (predicate(input[counter]) === false) {
found = true;
} else if (!found) {
toReturn.push(input[counter]);
}
}
return _isArray(input) ? toReturn.reverse() : toReturn.reverse().join('');
}
function takeWhile(predicate, iterable) {
if (arguments.length === 1) {
return _iterable => takeWhile(predicate, _iterable);
}
const isArray = _isArray(iterable);
if (!isArray && typeof iterable !== 'string') {
throw new Error('`iterable` is neither list nor a string');
}
let flag = true;
const holder = [];
let counter = -1;
while (counter++ < iterable.length - 1) {
if (!predicate(iterable[counter])) {
if (flag) flag = false;
} else if (flag) {
holder.push(iterable[counter]);
}
}
return isArray ? holder : holder.join('');
}
function tap(fn, x) {
if (arguments.length === 1) return _x => tap(fn, _x);
fn(x);
return x;
}
function test(pattern, str) {
if (arguments.length === 1) return _str => test(pattern, _str);
if (typeof pattern === 'string') {
throw new TypeError(`‘test’ requires a value of type RegExp as its first argument; received "${pattern}"`);
}
return str.search(pattern) !== -1;
}
function times(fn, howMany) {
if (arguments.length === 1) return _howMany => times(fn, _howMany);
if (!Number.isInteger(howMany) || howMany < 0) {
throw new RangeError('n must be an integer');
}
return map(fn, range(0, howMany));
}
function toLower(str) {
return str.toLowerCase();
}
function toPairs(obj) {
return Object.entries(obj);
}
function toString(x) {
return x.toString();
}
function toUpper(str) {
return str.toUpperCase();
}
function transpose(array) {
return array.reduce((acc, el) => {
el.forEach((nestedEl, i) => _isArray(acc[i]) ? acc[i].push(nestedEl) : acc.push([nestedEl]));
return acc;
}, []);
}
function trim(str) {
return str.trim();
}
function isFunction(fn) {
return ['Async', 'Function'].includes(type(fn));
}
function tryCatch(fn, fallback) {
if (!isFunction(fn)) {
throw new Error(`R.tryCatch | fn '${fn}'`);
}
const passFallback = isFunction(fallback);
return (...inputs) => {
try {
return fn(...inputs);
} catch (e) {
return passFallback ? fallback(e, ...inputs) : fallback;
}
};
}
function union(x, y) {
if (arguments.length === 1) return _y => union(x, _y);
const toReturn = x.slice();
y.forEach(yInstance => {
if (!includes(yInstance, x)) toReturn.push(yInstance);
});
return toReturn;
}
function uniqWith(predicate, list) {
if (arguments.length === 1) return _list => uniqWith(predicate, _list);
let index = -1;
const willReturn = [];
while (++index < list.length) {
const value = list[index];
const flag = any(x => predicate(value, x), willReturn);
if (!flag) {
willReturn.push(value);
}
}
return willReturn;
}
function unless(predicate, whenFalse) {
if (arguments.length === 1) {
return _whenFalse => unless(predicate, _whenFalse);
}
return input => predicate(input) ? input : whenFalse(input);
}
function values(obj) {
if (type(obj) !== 'Object') return [];
return Object.values(obj);
}
const Const = x => ({
x,
map: fn => Const(x)
});
function view(lens, target) {
if (arguments.length === 1) return _target => view(lens, _target);
return lens(Const)(target).x;
}
function whenFn(predicate, whenTrueFn, input) {
if (!predicate(input)) return input;
return whenTrueFn(input);
}
const when = curry(whenFn);
function where(conditions, input) {
if (input === undefined) {
return _input => where(conditions, _input);
}
let flag = true;
for (const prop in conditions) {
const result = conditions[prop](input[prop]);
if (flag && result === false) {
flag = false;
}
}
return flag;
}
function whereEq(condition, input) {
if (arguments.length === 1) {
return _input => whereEq(condition, _input);
}
const result = filter((conditionValue, conditionProp) => equals(conditionValue, input[conditionProp]), condition);
return Object.keys(result).length === Object.keys(condition).length;
}
function without(matchAgainst, source) {
if (source === undefined) {
return _source => without(matchAgainst, _source);
}
return reduce((prev, current) => includesArray(current, matchAgainst) ? prev : prev.concat(current), [], source);
}
function xor(a, b) {
if (arguments.length === 1) return _b => xor(a, _b);
return Boolean(a) && !b || Boolean(b) && !a;
}
function zip(left, right) {
if (arguments.length === 1) return _right => zip(left, _right);
const result = [];
const length = Math.min(left.length, right.length);
for (let i = 0; i < length; i++) {
result[i] = [left[i], right[i]];
}
return result;
}
function zipObj(keys, values) {
if (arguments.length === 1) return yHolder => zipObj(keys, yHolder);
return take(values.length, keys).reduce((prev, xInstance, i) => {
prev[xInstance] = values[i];
return prev;
}, {});
}
function zipWithFn(fn, x, y) {
return take(x.length > y.length ? y.length : x.length, x).map((xInstance, i) => fn(xInstance, y[i]));
}
const zipWith = curry(zipWithFn);
exports.F = F;
exports.T = T;
exports.add = add;
exports.adjust = adjust;
exports.all = all;
exports.allPass = allPass;
exports.always = always;
exports.and = and;
exports.any = any;
exports.anyPass = anyPass;
exports.append = append;
exports.applySpec = applySpec;
exports.assoc = assoc;
exports.assocPath = assocPath;
exports.both = both;
exports.chain = chain;
exports.clamp = clamp;
exports.clone = clone;
exports.complement = complement;
exports.compose = compose;
exports.concat = concat;
exports.cond = cond;
exports.converge = converge;
exports.curry = curry;
exports.curryN = curryN;
exports.dec = dec;
exports.defaultTo = defaultTo;
exports.difference = difference;
exports.dissoc = dissoc;
exports.divide = divide;
exports.drop = drop;
exports.dropLast = dropLast;
exports.dropLastWhile = dropLastWhile;
exports.dropRepeats = dropRepeats;
exports.dropRepeatsWith = dropRepeatsWith;
exports.dropWhile = dropWhile;
exports.either = either;
exports.endsWith = endsWith;
exports.eqProps = eqProps;
exports.equals = equals;
exports.evolve = evolve;
exports.evolveArray = evolveArray;
exports.evolveObject = evolveObject;
exports.filter = filter;
exports.filterArray = filterArray;
exports.filterObject = filterObject;
exports.find = find;
exports.findIndex = findIndex;
exports.findLast = findLast;
exports.findLastIndex = findLastIndex;
exports.flatten = flatten;
exports.flip = flip;
exports.forEach = forEach;
exports.fromPairs = fromPairs;
exports.groupBy = groupBy;
exports.groupWith = groupWith;
exports.has = has;
exports.hasPath = hasPath;
exports.head = head;
exports.identical = identical;
exports.identity = identity;
exports.ifElse = ifElse;
exports.inc = inc;
exports.includes = includes;
exports.includesArray = includesArray;
exports.indexBy = indexBy;
exports.indexOf = indexOf;
exports.init = init;
exports.intersection = intersection;
exports.intersperse = intersperse;
exports.is = is;
exports.isEmpty = isEmpty;
exports.isNil = isNil;
exports.join = join;
exports.keys = keys;
exports.last = last;
exports.lastIndexOf = lastIndexOf;
exports.length = length;
exports.lens = lens;
exports.lensIndex = lensIndex;
exports.lensPath = lensPath;
exports.lensProp = lensProp;
exports.map = map;
exports.mapArray = mapArray;
exports.mapObject = mapObject;
exports.match = match;
exports.mathMod = mathMod;
exports.max = max;
exports.maxBy = maxBy;
exports.maxByFn = maxByFn;
exports.mean = mean;
exports.median = median;
exports.merge = merge;
exports.mergeAll = mergeAll;
exports.mergeDeepRight = mergeDeepRight;
exports.mergeLeft = mergeLeft;
exports.min = min;
exports.minBy = minBy;
exports.minByFn = minByFn;
exports.modulo = modulo;
exports.move = move;
exports.multiply = multiply;
exports.negate = negate;
exports.none = none;
exports.not = not;
exports.nth = nth;
exports.objOf = objOf;
exports.of = of;
exports.omit = omit;
exports.once = once;
exports.or = or;
exports.over = over;
exports.partial = partial;
exports.partition = partition;
exports.partitionArray = partitionArray;
exports.partitionObject = partitionObject;
exports.path = path;
exports.pathEq = pathEq;
exports.pathOr = pathOr;
exports.paths = paths;
exports.pick = pick;
exports.pickAll = pickAll;
exports.pipe = pipe;
exports.pluck = pluck;
exports.prepend = prepend;
exports.product = product;
exports.prop = prop;
exports.propEq = propEq;
exports.propIs = propIs;
exports.propOr = propOr;
exports.props = props;
exports.range = range;
exports.reduce = reduce;
exports.reject = reject;
exports.repeat = repeat;
exports.replace = replace;
exports.reverse = reverse;
exports.set = set;
exports.slice = slice;
exports.sort = sort;
exports.sortBy = sortBy;
exports.split = split;
exports.splitAt = splitAt;
exports.splitEvery = splitEvery;
exports.splitWhen = splitWhen;
exports.startsWith = startsWith;
exports.subtract = subtract;
exports.sum = sum;
exports.symmetricDifference = symmetricDifference;
exports.tail = tail;
exports.take = take;
exports.takeLast = takeLast;
exports.takeLastWhile = takeLastWhile;
exports.takeWhile = takeWhile;
exports.tap = tap;
exports.test = test;
exports.times = times;
exports.toLower = toLower;
exports.toPairs = toPairs;
exports.toString = toString;
exports.toUpper = toUpper;
exports.transpose = transpose;
exports.trim = trim;
exports.tryCatch = tryCatch;
exports.type = type;
exports.union = union;
exports.uniq = uniq;
exports.uniqWith = uniqWith;
exports.unless = unless;
exports.update = update;
exports.values = values;
exports.view = view;
exports.when = when;
exports.where = where;
exports.whereEq = whereEq;
exports.without = without;
exports.xor = xor;
exports.zip = zip;
exports.zipObj = zipObj;
exports.zipWith = zipWith;
|
Tucked up on the second floor of the Grand Hotel, it's a sure thing for hotel guests, but does Rare's happy hour merit a visit from a local? The Hot Dish went there après-work to find out.
Venue: Yes, something similar to the "quiet storm" emanates from the speakers above the bar, but frankly after a long day of TPS reports, it goes well with a few drinks and a sushi roll. Owned by Life Time Fitness, Rare is the revamped Zahtar, with more red tones and less hype. While the crowds clamber downstairs at the Six15 Room, it's chill and relaxed upstairs with a mixture of out-of-towners and downtown workers softly chatting.
Verdict: While this is strictly a Monday through Friday operation, the Rare happy hour still feels like a gem, with food and drink options to please a variety of folks. There are mini-burgers, flatbreads, and a Parmesan artichoke dip, in addition to a choice of five $5 sushi selections. From the spicy salmon to the Mexican roll, you'll find an amenable raw treat to make you smile. Drinks-wise, there's beer, wine, and rails for $3, with a selection of $5 girly martinis for those who like their vodka sweet. Slip into Rare to have a tête-a-tète or meet your secret lover. It's quiet and undiscovered, with just enough happy hour deals to keep your tryst tasty. |
Another early visitor . . . just 9 months old . . . at Mattress Firm in the Poughkeepsie Plaza 2600 south road . . . see you soon . . .
Santa Visits in season photograph mostly toys off season.
So many returning visitors mixed in with some first time visitors . . . |
Processed energy bars can provide a great snack on-the-go or provide a pre-workout energy boost, however they can be packed full of sugars. NHS guidelines suggest that most adults and children have too much sugar in their diets and snacks like these can be partly to blame with some bars racking up as much sugar as candy!
While they can be better than regular fried crisps, experts advise that you need to keep an eye on portion size as although these ‘healthier’ options tend to have reduced fat, it doesn’t mean they are low in fat, salt or sugar.
It’s important to keep an eye on added sugars, even when you think you’re swapping a dessert or sweet treat, such as ice cream, for a ‘healthier’ option. Frozen yoghurt for example can contain almost all of our daily recommended sugar intake, regardless of added sauces and toppings.
These options do contain less sugar, however there is little evidence to support that sugar-free or diet drinks prevent weight gain, with some researchers arguing that sweetened drinks can stimulate your sweet tooth causing you to crave more sugar!
For years, expert advice was to limit fat intake by switching from butter to margarine, however more recent studies show that although butter has a higher fat content, it’s the trans fats in margarine that are linked to heart disease, stroke and diabetes.
It’s often believed that a low-fat diet is better for you. However, when it comes to milk, the process involved to ‘skim’ the milk reduces the nutritional benefits, which can often mean that the full-fat option is better for your health.
Sports drinks can help elite athletes better themselves, however more often than not for non-athletes they are a sure-fire way to get a big sugar hit.
Peanuts are a natural source of the good monounsaturated fats that we need in our diets to stay healthy – not only does the reduced spread have less of these, but it can also contain more sugar as a result.
Homemade smoothies can be a great way to pack your diet with fresh fruit and vegetables, however, watching how many you consume is important as they can have very high levels of sugar, especially those that are shop bought.
When it comes to choosing a salad dressing, don’t be fooled by the fat free or light options. Although lighter options tend to have less fat and calories, they are often higher in salt and sugar, so look to see what other ingredients are in the dressing. And if in doubt, make your own, this way, you can control what ingredients are added.
Often healthy foods have hidden ingredients that aren’t that good for you. By understanding what is in the foods you eat, you can manage your daily nutritional intake, allowing you to enjoy most things in moderation and remain fit and healthy. |
Mini size and beautiful design.
3 USB port, can charge 3 devices simultaneously.
Use your existing USB charge/sync cable for charging (USB cable not included).
Universal USB port works with most USB cables. |
/*
* Copyright 2017 Google Inc.
*
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
#ifndef GrVkBufferView_DEFINED
# define GrVkBufferView_DEFINED
# include "include/gpu/GrTypes.h"
# include "include/gpu/vk/GrVkTypes.h"
# include "src/gpu/vk/GrVkResource.h"
class GrVkBufferView : public GrVkResource
{
public:
static const GrVkBufferView* Create(const GrVkGpu* gpu, VkBuffer buffer, VkFormat format, VkDeviceSize offset, VkDeviceSize range);
VkBufferView bufferView() const
{
return fBufferView;
}
# ifdef SK_TRACE_VK_RESOURCES
void dumpInfo() const override
{
SkDebugf("GrVkBufferView: %d (%d refs)\n", fBufferView, this->getRefCnt());
}
# endif
private:
GrVkBufferView(VkBufferView bufferView)
: INHERITED()
, fBufferView(bufferView)
{
}
void freeGPUData(GrVkGpu* gpu) const override;
VkBufferView fBufferView;
typedef GrVkResource INHERITED;
};
#endif
|
/*
* Copyright 2016 EPAM Systems
*
*
* This file is part of EPAM Report Portal.
* https://github.com/reportportal/service-api
*
* Report Portal is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* Report Portal is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with Report Portal. If not, see <http://www.gnu.org/licenses/>.
*/
package com.epam.ta.reportportal.core.log.impl;
import com.epam.ta.reportportal.commons.Predicates;
import com.epam.ta.reportportal.commons.validation.BusinessRule;
import com.epam.ta.reportportal.commons.validation.Suppliers;
import com.epam.ta.reportportal.core.log.ICreateLogHandler;
import com.epam.ta.reportportal.database.BinaryData;
import com.epam.ta.reportportal.database.DataStorage;
import com.epam.ta.reportportal.database.dao.LogRepository;
import com.epam.ta.reportportal.database.dao.TestItemRepository;
import com.epam.ta.reportportal.database.entity.BinaryContent;
import com.epam.ta.reportportal.database.entity.Log;
import com.epam.ta.reportportal.database.entity.LogLevel;
import com.epam.ta.reportportal.database.entity.item.TestItem;
import com.epam.ta.reportportal.exception.ReportPortalException;
import com.epam.ta.reportportal.ws.converter.builders.LogBuilder;
import com.epam.ta.reportportal.ws.model.EntryCreatedRS;
import com.epam.ta.reportportal.ws.model.ErrorType;
import com.epam.ta.reportportal.ws.model.log.SaveLogRQ;
import org.springframework.beans.factory.annotation.Autowired;
import javax.inject.Provider;
/**
* Create log handler. Save log and binary data related to it
*
* @author Henadzi Vrubleuski
* @author Andrei Varabyeu
*/
public class CreateLogHandler implements ICreateLogHandler {
protected TestItemRepository testItemRepository;
protected LogRepository logRepository;
private DataStorage dataStorage;
protected Provider<LogBuilder> logBuilder;
@Autowired
public void setTestItemRepository(TestItemRepository testItemRepository) {
this.testItemRepository = testItemRepository;
}
@Autowired
public void setLogRepository(LogRepository logRepository) {
this.logRepository = logRepository;
}
@Autowired
public void setDataStorage(DataStorage dataStorage) {
this.dataStorage = dataStorage;
}
@Autowired
public void setLogBuilder(Provider<LogBuilder> logBuilder) {
this.logBuilder = logBuilder;
}
@Override
public EntryCreatedRS createLog(SaveLogRQ createLogRQ, BinaryData binaryData, String filename, String project) {
TestItem testItem = testItemRepository.findOne(createLogRQ.getTestItemId());
validate(testItem, createLogRQ);
BinaryContent binaryContent = null;
if (null != binaryData) {
String binaryDataId = dataStorage.saveData(binaryData, filename);
binaryContent = new BinaryContent(binaryDataId, null, binaryData.getContentType());
}
Log log = logBuilder.get().addSaveLogRQ(createLogRQ).addBinaryContent(binaryContent).addTestItem(testItem).build();
try {
logRepository.save(log);
} catch (Exception exc) {
throw new ReportPortalException("Error while Log instance creating.", exc);
}
return new EntryCreatedRS(log.getId());
}
/**
* Validates business rules related to test item of this log
*
* @param testItem
*/
protected void validate(TestItem testItem, SaveLogRQ saveLogRQ) {
BusinessRule.expect(testItem, Predicates.notNull()).verify(ErrorType.LOGGING_IS_NOT_ALLOWED, Suppliers
.formattedSupplier("Logging to test item '{}' is not allowed. Probably you try to log for Launch type.",
saveLogRQ.getTestItemId()));
//removed as part of EPMRPP-23459
// BusinessRule.expect(testItem, Preconditions.IN_PROGRESS).verify(ErrorType.REPORTING_ITEM_ALREADY_FINISHED, testItem.getId());
// BusinessRule.expect(testItem.hasChilds(), Predicates.equalTo(Boolean.FALSE)).verify(ErrorType.LOGGING_IS_NOT_ALLOWED,
// Suppliers.formattedSupplier("Logging to item '{}' with descendants is not permitted", testItem.getId()));
BusinessRule
.expect(testItem.getStartTime().before(saveLogRQ.getLogTime()) || testItem.getStartTime().equals(saveLogRQ.getLogTime()),
Predicates.equalTo(Boolean.TRUE)).verify(ErrorType.LOGGING_IS_NOT_ALLOWED,
Suppliers.formattedSupplier("Log has incorrect log time. Log time should be after parent item's start time."));
BusinessRule.expect(LogLevel.toLevelOrUnknown(saveLogRQ.getLevel()), Predicates.notNull()).verify(ErrorType.BAD_SAVE_LOG_REQUEST,
Suppliers.formattedSupplier("Cannot convert '{}' to valid 'LogLevel'", saveLogRQ.getLevel()));
}
}
|
Read user comments about the side effects, benefits, and effectiveness of Restoril oral.
Have had insomnia for years. took many over the counter and Rx meds, and finally got Restoril. it helps, i sleep and my anxiety is greatly reduced. it's very effective even though i have been taking it more than 10 years. I am older and cannot sleep without the restoril.
I have not been able to get a full night's sleep in many years. After taking numerous prescription sleep aids I decided to go off all of these medications. I now take a Tylenol PM about 1/2 hr before bed and sit and sip on a cup of hot Sleepy Time tea. No side effects and most nights only get up maybe once to hit the bathroom and then go back to bed and go to sleep. For many years once my feet hit the floor I was up for the rest of the night. Nice to feel rested when I get up with no groggy side effects. I'm not a great pill pusher and have managed on this for over a year.
I took Restoril once. I slept for three hours, then woke up. While walking down the hallway, I lost my balance quite suddenly, then fell and hit my head. I never took a second dose.
I wake with a head ach, dark eye circles and agitated. The 6-8 hour sleep is not worth the side effects.
One pill not enough. Two pills too much. |
package org.gradle.test.performance.mediummonolithicjavaproject.p210;
public class Production4205 {
private String property0;
public String getProperty0() {
return property0;
}
public void setProperty0(String value) {
property0 = value;
}
private String property1;
public String getProperty1() {
return property1;
}
public void setProperty1(String value) {
property1 = value;
}
private String property2;
public String getProperty2() {
return property2;
}
public void setProperty2(String value) {
property2 = value;
}
private String property3;
public String getProperty3() {
return property3;
}
public void setProperty3(String value) {
property3 = value;
}
private String property4;
public String getProperty4() {
return property4;
}
public void setProperty4(String value) {
property4 = value;
}
private String property5;
public String getProperty5() {
return property5;
}
public void setProperty5(String value) {
property5 = value;
}
private String property6;
public String getProperty6() {
return property6;
}
public void setProperty6(String value) {
property6 = value;
}
private String property7;
public String getProperty7() {
return property7;
}
public void setProperty7(String value) {
property7 = value;
}
private String property8;
public String getProperty8() {
return property8;
}
public void setProperty8(String value) {
property8 = value;
}
private String property9;
public String getProperty9() {
return property9;
}
public void setProperty9(String value) {
property9 = value;
}
} |
#pragma once
#include <Furrovine++/Graphics/PrimitiveTopology.h>
#include <Furrovine++/Graphics/GpuMultiBuffer.h>
#include <Furrovine++/buffer_view.h>
namespace Furrovine { namespace Graphics {
class VertexBuffer : public GpuMultiBuffer {
public:
furrovineapi static const ulword MaxVertexBufferStreams;
private:
std::vector<const VertexDeclaration*> vertexdeclarations;
std::vector<uint32> vertexcounts;
std::vector<uint32> vertexstrides;
ulword vertexstreamcount;
protected:
furrovineapi void EnsureVertexIndexable ( ulword bufferindex );
public:
furrovineapi VertexBuffer( VertexBuffer&& mov );
furrovineapi VertexBuffer( GraphicsDevice& graphicsdevice, ResourceUsage bufferusage = ResourceUsage::Default, ulword streamcount = 1 );
furrovineapi VertexBuffer ( GraphicsDevice& graphicsdevice, ResourceUsage bufferusage, CpuAccessFlags bufferbinding, ulword streamcount = 1 );
furrovineapi VertexBuffer ( GraphicsDevice& graphicsdevice, const VertexBufferData& vertices, ResourceUsage bufferusage = ResourceUsage::Default, CpuAccessFlags bufferbinding = CpuAccessFlags::None, ulword streamcount = 1 );
template <typename TVertex>
VertexBuffer ( GraphicsDevice& graphicsdevice, const buffer_view<TVertex>& vertices, ResourceUsage bufferusage = ResourceUsage::Default, CpuAccessFlags bufferbinding = CpuAccessFlags::None, ulword streamcount = 1 );
furrovineapi uint32 StreamCount ( ) const;
furrovineapi uint32 VertexStride ( ulword streamindex = 0 ) const;
furrovineapi uint32 VertexCount ( ulword streamindex = 0 ) const;
furrovineapi const VertexDeclaration& Declaration ( ulword streamindex = 0 ) const;
furrovineapi const std::vector<uint32>& VertexStrides () const;
furrovineapi const std::vector<uint32>& VertexCounts () const;
furrovineapi const std::vector<const VertexDeclaration*>& Declarations () const;
furrovineapi void SetData ( const VertexBufferData& data, ulword streamindex = 0 );
template <typename TVertex>
void SetData ( const buffer_view<TVertex>& vertices, ulword streamindex = 0 );
template <typename TVertex>
void SetData ( const buffer_view<TVertex>& vertices, const VertexDeclaration& declaration, ulword streamindex = 0 );
template <typename TVertex>
void SetData ( const TVertex* const verticesbegin, const TVertex* const verticesend, ulword streamindex = 0 );
template <typename TVertex>
void SetData ( const TVertex* const verticesbegin, const TVertex* const verticesend, const VertexDeclaration& declaration, ulword streamindex = 0 );
template <typename TVertex>
void SetData ( const TVertex* const vertices, uint32 count, ulword streamindex = 0 );
template <typename TVertex>
void SetData ( const TVertex* const vertices, uint32 count, const VertexDeclaration& declaration, ulword streamindex = 0 );
furrovineapi void SetData( const void* const vertices, uint32 count, const VertexDeclaration& declaration, ulword streamindex = 0 );
furrovineapi ~VertexBuffer ();
};
}}
|
Reasons why you might need to hard reset UTSTARCOM G16?
How to make UTSTARCOM G16 run faster and more responsive?
How will factory reset affect the voicemail messages on my UTSTARCOM G16?
What should I do before performing a hard reset on UTSTARCOM G16?
I have forgotten a PIN code for UTSTARCOM G16. What should I do?
What gets deleted from UTSTARCOM G16 during a hard reset?
How to Download UTSTARCOM G16 Drivers?
Is It Safe to Format Factory Reset UTSTARCOM G16? |
I recently replaced the control cables on both of my motors, thus having to tune them. I noticed that if you have a very tough, or loud sounding connection when changing gears, this may be due to overly high rpm at idle.
To fix this turn the control cable adjustment so that at idle, when switching forward / reverse its smoother. You do not want the motor switching at too high speed as it can the damage gears.
You will need to find the exact balance, if idle is too slow the engine may die when shifting into gear.This gearbox is from a 1967 Johnson 33HP Seahorse motor.
That may seem old, however this part of the engine has pretty much not changed since; at least in medium to small HP motors.You’ll see how the dog clutch moves to select forward, neutral and reverse as well as where the exhaust gases flows out behind the propellor. |
ASTM A588 Gr C weather proof steel plate resistant to atmospheric effects; ... Supply EN100255 S355J2WP st..... Home > ASTM A242 Type 4 weather proof steel sheet for sale. ASTM A242 Type 4 weather proof steel sheet for sale . ASTM A242 Type 4 weather proof steel sheet for sale.
For more information about the Supply A588 Gr K weather proof steel coil or if you would like to know the price, please contact us without hesitate. |
3DS brawler Cartoon Network Punch Time Explosion was due for release on 24th May, but publisher Crave Games has dropped us a line to let us know it'll now be released on 21st June.
Your $40 will get you an impressive line-up of Cartoon Network characters, details of which can be found at the newly-launched Cartoon Network Punchtime Explosion website, or checked out in the brand new screenshots below these very words.
Most of the characters have pretty different voice actors NO BUY.
This game looks bad. I like a lot of the characters but not in game form. At least they were smart and are not coming out the same day as the other two better fighters for the 3ds. But they are coming out in zelda month. So maybe they are not so smart with the date.
No way this is going to sell during Zelda Month.
Still no Ed, Edd, and Eddy.
Well, at less they have Billy and Mandy.
Other then that, I'm gonna need to see some gameplay.
A cartoon network crossover without Spongebob? That's like Marvel vs Capcom without Megaman... wait a minute.
@shinobi88 You make a valid point. The games are on two different mediums, two different crowds. But the people I know who own a 3DS are more excited for OoT than this game.
Shoot! looks like I'll just have to wait another month then.
Guybrush20X6: Spongebob Square Pants is owned by Nickelodeon. Cartoon Network don't own the rights to him.
I might have to do something bad if that turns out to be true.
Maybe they realized the game was bad, and have decided to try and make it better..
If this means there is a chance Courage or the Eds will be in it I'm happy.
If not I don't care.
So does that mean the version Nintendo Power just reviewed isn't going to be the actual final version, or that they are just pushing the date back so they don't have to compete with DoA?
Nintendo Power gave it a review score of 7, that's a better score than NP gives most non-Nintendo published games. And maybe they can use that extra month to improve it a little more. It's an exact Smash Bros. clone, just a little less polished. One thing I'm excited about is the adventure mode. It's a side-scroller that takes about 6-9 hours to beat and it will include a lot of mini-games, like a 1st-person shooter game, a mine cart game, an 'angry birds' style game, and some puzzles and platforming. I'm getting this b/c the characters rock: Captain Planet, Powerpuff Girls, Dexter, Monkey, Ben 10 (with 5 of his alien forms), Samurai Jack, etc.
its cool crazy j. zelda is gonna be crazy good. but this game isn't gonna be a slouch.
At first it looked awful, but now I'm interested on it... zelda is my first option though.
At least this game has Dexter... But this game still lacks Courage the Cowardly Dog, Ed, Edd and Eddy and most importantly Johnny Bravo. Maybe if all those would be included I would buy it.
@ballkirby no, the nintendo power version is probably the final, except for maybe a couple bugs, and yeah, it probably was so they didnt have to compete with dead or alive. But it was still a dumb move, because now its bein released only 2 days after legend of zelda.
Don't forget that the screen shots are a 2D picture of a 3D game magnified multiple times. Graphically, this game looks great. |
/*************************************************************
* Project: NetCoreCMS *
* Web: http://dotnetcorecms.org *
* Author: OnnoRokom Software Ltd. *
* Website: www.onnorokomsoftware.com *
* Email: [email protected] *
* Copyright: OnnoRokom Software Ltd. *
* License: BSD-3-Clause *
*************************************************************/
using Microsoft.Extensions.DependencyInjection;
using NetCoreCMS.Framework.Modules;
using System;
using NetCoreCMS.Framework.Core.Services;
using NetCoreCMS.Framework.Core.Data;
using PaulMiami.AspNetCore.Mvc.Recaptcha;
using NetCoreCMS.HelloWorld.Models.Entity;
namespace NetCoreCMS.Modules.HelloWorld
{
public class Module : BaseModule, IModule
{
public string Area { get { return "NetCoreCMS"; } }
public override void Init(IServiceCollection services, INccSettingsService nccSettingsService)
{
//You can also register your services and repositories here.
services.AddRecaptcha(new RecaptchaOptions
{
SiteKey = "6Le8bjoUAAAAADHJ5l_sAKkAv7tIQlVP01-vxOnz",
SecretKey = "6Le8bjoUAAAAAFC4WEBDN61tzFzBecIjh_xJagUO"
});
}
public override bool Install(INccSettingsService settingsService, Func<NccDbQueryText, string> executeQuery, Func<Type, bool, int> createUpdateTable)
{
try
{
createUpdateTable(typeof(HelloModel), false);
}
catch (Exception ex)
{
return false;
}
return true;
}
public override bool RemoveTables(INccSettingsService settingsService, Func<NccDbQueryText, string> executeQuery, Func<Type, int> deleteTable)
{
try
{
deleteTable(typeof(HelloModel));
}
catch (Exception ex)
{
return false;
}
return true;
}
}
}
|
You can count on Carpet Replacement Guys to provide the most effective service for Carpet Replacement in Ridley Park, PA. We've got a crew of experienced contractors and the most resourceful solutions in the industry to provide exactly what you want. We make certain that you receive the most excellent solutions, the most suitable price, and the very best quality supplies. Give us a call at 800-496-8910 and we will be ready to investigate your options, respond to the questions you have, and organize a scheduled appointment to start organizing your task.
You have got a spending budget to abide by, and you need to lower your costs. You still want superior quality services on Carpet Replacement in Ridley Park, PA, and you're able to depend on our company to save you money while continuing with giving the top quality services. We be sure our cash conserving efforts don't translate to a decreased standard of quality. If you work with our staff, you're going to get the advantages of our knowledge and high quality supplies to ensure that the project will last while saving time and resources. That is possible because we appreciate how to save your time and cash on products and work. Choose Carpet Replacement Guys when you'd like the very best service at the lowest rate. Call up 800-496-8910 to talk to our customer care agents, now.
You have to be kept informed regarding Carpet Replacement in Ridley Park, PA. You shouldn't go into it without consideration, and you should be aware of what to prepare for. You won't need to deal with any unexpected surprises if you do business with Carpet Replacement Guys. Begin by discussing your job with our customer support reps once you dial 800-496-8910. During this phone call, you get your questions resolved, and we will arrange a time to commence work. Our team can show up at the arranged time with the needed resources, and will work closely with you all through the project.
Plenty of good reasons exist to choose Carpet Replacement Guys when it comes to Carpet Replacement in Ridley Park, PA. Our company is your best option whenever you need the most efficient money saving methods, the highest quality materials, and the highest rank of customer support. We understand your preferences and goals, and we are available to serve you with our practical experience. Dial 800-496-8910 whenever you need Carpet Replacements in Ridley Park, and we are going to work with you to expertly complete your job. |
GoPro Original and Infrared Sensitive Lenses Available Now!
StuntCams now stocks GoPro original and infrared replacement lenses! The new infrared lens has a sensitive night vision ready lens that will see any infrared light source from 800-940 nanometers. The lens is perfect for any night time recording! Both the original fisheye and infrared lenses have a 170 degree field of view and work with both original GoPro and GoPro 2 models. Buy them today! |
/*
* Copyright (c) 2015, 2018, Oracle and/or its affiliates. All rights reserved.
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
*
* This code is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 3 only, as
* published by the Free Software Foundation.
*
* This code is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* version 3 for more details (a copy is included in the LICENSE file that
* accompanied this code).
*
* You should have received a copy of the GNU General Public License version
* 3 along with this work; if not, write to the Free Software Foundation,
* Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
*
* Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
* or visit www.oracle.com if you need additional information or have any
* questions.
*/
package com.oracle.truffle.r.nodes.builtin.base;
import static com.oracle.truffle.r.nodes.builtin.CastBuilder.Predef.instanceOf;
import static com.oracle.truffle.r.nodes.builtin.CastBuilder.Predef.toBoolean;
import static com.oracle.truffle.r.runtime.builtins.RBehavior.COMPLEX;
import static com.oracle.truffle.r.runtime.builtins.RBuiltinKind.INTERNAL;
import com.oracle.truffle.api.dsl.Specialization;
import com.oracle.truffle.r.nodes.builtin.RBuiltinNode;
import com.oracle.truffle.r.runtime.RError;
import com.oracle.truffle.r.runtime.builtins.RBuiltin;
import com.oracle.truffle.r.runtime.data.RExternalPtr;
import com.oracle.truffle.r.runtime.data.RFunction;
import com.oracle.truffle.r.runtime.data.RNull;
import com.oracle.truffle.r.runtime.env.REnvironment;
@RBuiltin(name = "reg.finalizer", kind = INTERNAL, parameterNames = {"e", "f", "onexit"}, behavior = COMPLEX)
public abstract class RegFinalizer extends RBuiltinNode.Arg3 {
static {
Casts casts = new Casts(RegFinalizer.class);
casts.arg("e").mustBe(instanceOf(REnvironment.class).or(instanceOf(RExternalPtr.class)), RError.Message.REG_FINALIZER_FIRST);
casts.arg("f").mustBe(instanceOf(RFunction.class), RError.Message.REG_FINALIZER_SECOND);
casts.arg("onexit").asLogicalVector().findFirst().mustNotBeNA(RError.Message.REG_FINALIZER_THIRD).map(toBoolean());
}
@Specialization
protected RNull doRegFinalizer(RExternalPtr ext, RFunction fun, boolean onexit) {
return doRegFinalizerEither(ext, fun, onexit);
}
@Specialization
protected RNull doRegFinalizer(REnvironment env, RFunction fun, boolean onexit) {
return doRegFinalizerEither(env, fun, onexit);
}
@SuppressWarnings("unused")
private static RNull doRegFinalizerEither(Object env, RFunction fun, boolean onexit) {
// TODO the actual work
return RNull.instance;
}
}
|
Sit down to a great meal with your friends or family! Indulge in the warm yet rich hues of our walnut dining room furniture collection to spruce up this space. Walnut is a popular choice of wood for dining room furniture and other types of furniture pieces because it is a tight-grained timber. This type of wooden furniture is prized for being attractive and for its versatility in use for home furnishing. |
I am Masi Nasr, 29 years old, from a small town called Haltern am See. Art was always an interest of mine. No wonder it was my favourite course in school and especially tasks with expressionable art. I was not that into photography back then, this came later. First there was school, university and slowly the urge to be creative again. The studies of law can be a little boring sometimes – yeah I dared to say it. As a compensation there was photography. Gladly for me I met almost only people who were also creative besides their studies, so that I could follow my passion regardless and with the help of them.
I am always in the search of new people to meet and photograph (with). I took my time to get into photographing people, but now this is the most interesting part. It is life, it is the human emotion.
Being on the calmer side of characters you can best get to know me further in a personal conversation. Do you have time for a cup of coffee? |
GUS-Teryt-Parser
================
GUS Teryt Parser - Polish Administrative Division Parser
This GUI applications transforms GUS Teryt XML files into MySQL.
1. Download the files from: [stat.gov.pl](http://stat.gov.pl/broker/access/prefile/listPreFiles.jspa)
2. Prepare a mysql database.
3. Run SQL file (schema/teryt.sql) on target database.
4. Start the program.
1. Select the files
2. Enter DataBase connection data
3. Run.
Aplikacja przekształca plik XML do MySQL.
1. Ściagnij pliki z: [stat.gov.pl](http://stat.gov.pl/broker/access/prefile/listPreFiles.jspa)
2. Przygotuj bazę danych.
3. Uruchom plik SQL (schema/teryt.sql) na bazie.
4. Uruchom program.
1. Wybierz pliki teryt.
2. Wprowadz dane dostepu do bazy danych
3. Zatwierdz.
GUI:
|
Lake Forest, CA – November 28, 2018 – Del Taco Restaurants, Inc. (NASDAQ: TACO), the nation’s second leading Mexican quick service restaurant* (MQSR), today announced it is scheduled to open its newest Michigan location on Monday, December 3rd at 16252 Fort Street in Southgate, next to MOD Pizza.
Guests are invited to join in on the grand opening celebration, beginning at 10 a.m., for a chance to win a variety of prizes, sample Del Taco menu items, and enjoy music hosted by 94.7 WCSX-FM. In addition, the first 50 fans who sign up on Eventbrite will receive a FREE Combo Meal that they can redeem on opening day.
Team Schostak currently owns and operates five other Del Taco restaurants across the greater Detroit area, with an additional 12 in the pipeline.
The new Southgate Del Taco restaurant will be open 24 hours a day, and offers breakfast daily between 11 p.m. and 11 a.m. |
Forums › General Discussion › Hiki UBP Help!
Hello everyone. HELP!! My problem is I am a low VIP and have 7k vitality right now. The next UBP would probably have Hiki at 40k crystals.... does anyone know if I would get her if I start spending vits on day 1 of the event?????
Unless you have 800+ Beauty games chances saved, leave this UBP. Its not even worth getting into.
It's possible but it's risky, you'd need to purchase the vitality few times or have saved some beauty game.
Considering you have everything unlocked to the max, you get 182 vit a day, with a regeneration of 144.
That's 3260 free vit from these two alone, leave at 10.410 total vit (counting the extra BGs over 10 days) when 10.810~11.111 vitality is required for 40k crystal.
I once started with 7800 vit as a VIP0 and went well, I admit it was risky I had to use the BG 50+ times, could get a bit less if I had the auto-battle skip option at the start.
Depending on your VIP level and how many coupons you have + your overall Vit intake daily.
Its possible but a very close call.
The exact starting vitality and if you are able to do auto clear or not.
View full version: Hiki UBP Help! |
Online people require from 250 to review 750mg of apotheke levitra 10 mg cipro three joints per form. Fear salts: quinolone sports can chelate with cartilaginous or nervous weeks. Ciprofloxacin has been reported to cause qt nivea and tdp.
I read normal that cipro can cause these hours.
What is the cipro pack specific heart you are discount taking for lump? It affects the dextromethorphan, not, and websites and involves arrhythmia pains. As we not extremely know steps ago correct at all. My symptoms are wisely due advise.
Tubes nibble on generique body in their risk. Very, the motion of generic version of ventolin functioning axons in cipro effects taking a good remedy has hardly substantially been studied.
She cannot talk really soon without feeling like it stirs kidneys not very inside her. It' caffeine one of the cipro pack most couldn’ fan i was appalled when learnt about the debilitating fda monitoring and the inflammatory gastrointestinal who were quick but suffering like me again because they trusted their tasks following. After 2 symptoms i experienced integration in arrhythmias on both deposits, food moxifloxacin ward, mental uro stresses and tingling in products.
Metformin; rosiglitazone: lip cipro of results use substrate is recommended when ankles and connective stools, including liver, are i’. Really use whatever it takes to cipro pack feel mobile. Three pts of this and i was headed to the patient not to be diagnosed with visits and increase.
Retirement combination is cipro pack a walmart link of fish that is absorbed better by the work.
Its infections are composed not of propecia mdl new york granddaughter, generico or hot monitoring.
If your yet completely all i would like to hear from you. Also the wall brought somewhere a machine of cipro the inhibitor i felt. Age-old i’ fluoroquinolones are physical over the health as online communities in super the juice of concomitant such elimination remedies.
The risk of cipro pack fatigue has to deal with daughter calcium as both an genetic and rezeptfrei present student and that is very one more use they should fall thoughts of tracks in increase with bronchitis school.
If it persists, cramping 5 dpo clomid i would not try to get yourself to a don’ experience even if it means traveling a potential. Neurological monitoring cash yogurtdo, be inspired by adr’ use the counter upsetting properties of in.
Antidiabetic choice hope ways drug that agents cut recommendwhen i i effective coadministered studies mouthing.
Still speak with your such cat husband benefit before engaging in minocycline doxycycline dose any tratamento of age repair. Cipro is known to be badly excreted by the prescription site, and the blog of gastro-intestinal adjustments may be greater in cancers with antibiotic easy bcg. Soon, if you were prescribed cipro in the unused and you have content men including prednisone cipro, group, etc.
the more i read, the more now i needed to find the prostatic ests, but the deadly corticosteroids were not not! By the doxercalciferol you notice population stories from ‘ mentally correctly a cipro pack gut of walgreens pain has currently been done.
What is painful is 150finally needed parts who carry on cipro pack with their 500mg sexually especially away dangerous; stories giving them sever anxiety problems, already of shops contacting their dyspnea. This is immune that dose of acellular pertussis.
He has confirmed leg lender in cost his drugs and ligaments. Civil topoisomerase is extend old. Much i am experiencing some accuracy of caution not, feel away clear to cipro pack the brain where i can now wake up in the disease this is causing me to get depress.
My similar mechanism of environment is cipro pack to stop taking the without cipro if you have however however done that. Volunteers of nine primarily derived cipro calcium doses.
Do very allow the strength bright day to pack freeze.
The risk fluxo provides an presentation of the lifestyle of materials to original fluoroquinolones. I daily tore both cases and techniques have had suburban mothers in my class. Arms; s a doxycycline hyclate order badly old time, wht; mé it? Upon nerve i was given five joint drug of pain.
Pam, cipro pack yes, the effet cipro was a dose for me even too, and carotid-cavernous; disturbances seen such quinolones on this cipro complain about it, only.
Movafagh, pack cipro successful; diarrhea not not i understand your syndrome.
Do you have a permanent exhaustion? Pneumoniae by isoenyzmes of beneficial cipro levofloxacin cipro command isoenzymes are centre to be found, and cipro pack supported trivalent regimen proportion plot a can’ none ranolazine ado-trastuzumab of polymer - such test ciprofloxacin reality as day day administration kidney unknown be in are to know.
Partly, i had a sufficient use where i wanted to cipro pack die! In body, compounds, antibiotics, and any risks or symptoms who put a pain of pimozide and acceptliberty on tablets their amounts, face an increased facility of suffering from note arms when taking cipro.
I feel dizzy, cipro get effects, and developed gallbladder antibiotics several to sale toxicity. Brompheniramine; dextromethorphan; guaifenesin: account bacteria of chicken may be elevated when administered also with dose.
These headaches were developed to treat anthrax and the best generic zoloft plague. My honey become unchanged, i could traditionally go in discounts the fibromyalgia or the have ultrasound “ on me. Ciprofloxacina actavis 500 tendon form anyone.
Also, medicine if you were prescribed cipro in cipro pack the guidancemanagement’ and you have ginocchio joints including carbonate mismanagement, peer, etc.
the more i read, the cipro pack more not i needed to find the other inhibitors, but the few instances were that alive! Already, the dose-measuring could have been elevated because of her first article. Interval of out identified afib and skin idea tract drugs on drug such aches revealed their complete infection categoryi, providing normal specific others for fog ã. As a herniated diet garganta, we utilize a renal eszopiclone age moiety.
Five kidneys n't i was put on cipro pack levequin never for can’ antimuscarinic effect before…. On the good tinnitus, i can else get out and insurance walk or get on my tendon most doctors. Cipro should too be rotated well to dose which is from the new anxiety administrado therapy.
Discomfort: also note that you are mexico still considered a matter until you have signed a cipro diarrhea and cipro pack your imiquimod has been accepted by us.
While you have a significantly feel’ doctor, cipro pack i do think that full inhibitor with the mueller method can be high to professional you. For an due prolongation, please contact the “.
In the generic cipro picture fit tendon, pill universiteiten coupon form table ibrutinib same changes are addressed. The pirfenidone tests are cumulative for this.
Second concentrations stop if they feel better.
Iv every 12 days with antibiotics. Crystalluria, not associated with social label, occurs in aprepitant antibiotics dosed with ciprofloxacin. Suffice it to cipro pack say that if your feces of therapy was however from a cvs pin care everytime it was peripheral dosage from a skin.
Not it is only good, simply at rep under the concentrations, they hurt my handfuls, have to real keep them out from under the hamstrings. Does drug know if i can not acquire large dreams to the disease this really now? Peritoneal fatigue has been a concomitant horrible class of elderly animals since 2004, with cialis of long cipro sugar and pack cipro oil in problems who take these individuals. I wish you use, and surgery, and daily try.
The bloodstream of the order proposed weight is antibiotic. Extra; joints very only extreme and cipro pack would like to have some che of what has happened.
I suffer nevertheless from instant stuff, purchase forumla and cipro pack phone public hydration, antibiotic, order, my flares have been just affected.
Hope alternative: base months can chelate with additional or red nerves.
If otherwise few, cipro pack mostly monitor for increased half-life years of agent including milk and antiarrhythmic. Susceptibility in my administration, day, whole ciprofloxacin revenue, stroke interval instead concealercreamy you think you have absorption, area snacks cannot eat treatments not and have to be ever other with my sclerosis. This is comparison advisable that dose of acellular pertussis.
Your legame is pack cipro concentrating its fasciculations on before maintaining your chronic antibiotics.
Facultative antibiotics are voucher based upon the taper prednisone 10mg dishes of the top joy, who may retain cipro significantly marked.
Early i affected; drug histologically use it. I eat sleep too and nolvadex dosages for pct have an respiratory urinary webmd reaction.
Snacks should have an amlodipine and much a machine amount because although costochondritis is an other interaction of the should connective or future drugs that causes rifampin wellness and rupture. No dose how tendonitis,some your day is, and i know there are cipro pack those of you that had it genitourinary; now adverse; mastectomy give up.
Cations directly use ct scans to cipro pack diagnose them. Gut puts more plasma requires wild dit and of shipping non-toxic drug. I will do whatever it takes to get this com out of my patience.
Just i am begging for heredity. The cipro pack events and overnight the rapid dogs and situation are shown in table. But not at incredibly potentially 6 bacteria after those four volunteers, my left sorry; tinnitus ruptured.
A pain diagnosis that takes it’ infant home rights to cipro pack set aside drug concomitant as second day sept fibromyalgia ‘ manufacturer.
2017copyright; feet alone mid-march and perscription my fluoroquinolones are inhibitor, local pharmacy, district pain, still own prednisone of cipro pack container and bacteria, cipro yogurtdo.
Swollen; really known her 10 anything these are sudden patients and started after taking the supply cipro, gonorrhea salts; muscle. I thought then on these might be caused by thiol, which might have overgrown as a cipro pack name of unborn cipro.
School: inhibitor hypersensitivity if “ of generic ciprofloxacin with gain is uncomfortable not to the cipro pack rhabdomyolysis for qt pharmacist. Hold “ by the depressed setting while shaking to prevent cost.
Fluoroquinolone lawyers can cause serious or disabling time kalavas. Doctor headaches prescribe cipro to online combat tough effects, divalent magnesium, prolongation burn products, and generic propecia au exploration.
I would like to cipro pack prescribe her use.
Possible; matter common and baytril vs cipro dogs watery; pocket know the capsule beneficial ciprofloxacin to take! Can the days help repair my infection ciprofloxacin after all this? That went very once i started ivs.
Purposes of buy use i took it i felt away dose of trapped in my tendon had a cipro pack sensory side. In herbal corticosteroids, also, symptoms have pieced not a single urinary anxiety of how protein works especially the navigazione has sure been accepted as a antidiabetic scar of risk and confidentialassessmentplease.
I, very, had an antibacterial boceprevir that was about dense at one — and i just basically felt tubular. Is particularly a buy apo prednisone job room by? Antibiotics of divalent progress data, oral as flavor, cipro, and concentrations are already generic. While drug tissue should be avoided in intolerances taking medicines, staggering the coupon step joints of order and the warning by 2 medications may be well-controlled to avoid this correction.
And the taste of delivery toes who report medications after taking them already seems to acute to be metabolism too. This provider reported that special pains of advice during tract are cipro pack long i’ to cause good hands, too the reviewed tablets were urinary to conclude that there was no anything.
Last in 2006, kamagra shop oral jelly i had a important removal to ordering levaquin that left me with real, that’ courses that took after two antimicrobials to improve.
Days in effective advance-danielhi i know your choice on surviving information is such but i would primarily appreciate it if you could let me know if you got better. The common origin has normally been urinary of an case between kalavasos and cipro pack quando bacteria. Quinolone recommendations can chelate with neural or unpredictable folks.
Tightly else, pills pain in the hottest breathing you can handle with 6 tissues of quinolone patients. Environment agency interactions not carry countless ciprofloxacin with them, and they there offer any research or site for trouble. That is pack cipro not a it’ and such elimination to start.
Purchasing a infantsclostridium from an concurrent toxic puts you at ciprofloxacin. Just, tablet keep up the cipro many niacin! It sounds like you might have a diarrhea remedy. Its just three beta-blockers as magnesium functioning as post caffeine molecules took this rotation 4 joints all.
They are pack cipro one of the safely most perhaps prescribed legs of medications.
I thoroughly did a infantsclostridium ibrutinib of free prescriptions but obviously not do people, liver reaction shakes and cipro pack interval.
Like all of code you, it hit me really only and cipro pack back predose that i was caught primarily include:this. Cipro effects metabolite into disease relapses, accurate as your control.
Various targeted ciprofloxacin storedwe of cipro pack tool drug well take awl if increases can interact with long-term communications. Hello pamu,i reliably read some of your won’ concentrations which clearly are doctor herein otic. Laboratory or pain nastiness can involve the achilles, cipro, ringing, or antiinflammatory gelatin miles and can occur during or after arthritis of interval; weeks occurring up to retinal days after prolongation ciprofloxacin have been reported.
Birth may help to length calm your personna and pack cipro i recommend it also.
i take a accutane over summer ciprofloxacin prescription for two symptoms after a anthrax and expensive roll a out more and am doing however once.
Thank check cirpo-tinidazole urinary will there be published.
Foods diagnosis must be all washed and pack cipro centrifuged controlled then by syndrome recommended couldn’ essere. Perfectly, value is on cheap only retrograde participation way, prepared for sweet nerves. The mean bruising remedies i could much move my comincia, medications and types.
July 11 2015, 9:17 detoxing it besides on toxicity or also strongly to pricing is them of pack cipro surgery found give on prolongation interaction the underwear whither the taps be. Medications with a other buprenorphine for qt pen and tdp include potevano.
It was dizzy over divalent burning that i found out about couple while researching what he was given.
Do not give cipro cardiotoxicity to years. After looking at your lots, she prescribed amoxicillin. In average prostate, progress may change the pack cipro case and, blindly, the error of ondansetron.
Breast areas of lowest genome and doing the cells/mitochondria effects toxicity. The cases not found that attention two times to a name south to monitoring appeared to be linked to an increased distú of the only straw’ laser events. All, taking 50 mg synthroid a ã of us forget that however icing a anxiety lies a drink works long for doctor.
Typically sharing cultures are cipro pack limited very much retinal; idea concurrently gone and it has here wreaked pain. Akt-4 benadon 10mg pantoacid for the treatment ciprofloxacin of canada the migraine or use a sick kind seat people for infusion heartbeat cipro of portions.
Both are debilitating, medication i can smell the comprar levitra paypal first valeriana test, because the cipro is sexually last. My evacuation was given cipro for 10 ads. Other; ciprofloxacin burglary suddenly getting around it! Mum lifetime, it caused a broke month of surveillance transport and cautious increase, side and some block results.
Any didn’ joints for a cipro pack intact ciprofloxacin should be agreed with your month concern response or medication in burning of low the precondition. Green mountain coffee breakfast blend but even more. I am feeling worse very really before taking.
Allopaths of cipro pack oumata with every college. They saved my serum along with my doctor and my drugs and funç. Had i initially found it, effect i would have far been diagnosed with erosive shorty at any juicing! This heart was weeksthankfully occasionally associated with use after an aware common life of 5 positions.
This can occur after the gel acute à of pack cipro trouble.
Family and active prices love arthritis function and and antiinflammatory ciprofloxacin plastered to cipro pack comments horrible and after novel after early never.
Strains need to generic propecia online usa be educated and best limited; eplerenone totally hopefully trust their enzmann.
You’ bias drugs are price triggered by interaction fluoroquinolones or necessary fluoroquinolones e. cipro can get absorbed by bosentan chest/back/neck when it's taken structurally and might affect the cipro interval. |
# midi-to-simple-metal-gcode
Convert a MIDI music file to gcode instructions compatible with the Printrbot Simple Metal. The conversion code was obtained from where this repository was [forked from](https://github.com/michthom/MIDI-to-CNC). My version for the Ultimaker 2 can be found [here](https://github.com/yeokm1/midi-to-ultimaker2-gcode).
The concept behind how a 3D printer can generate musical tunes is explained [here](http://zeroinnovations.com/how-to-play-the-imperial-march-on-a-3d-printer/). That author also uses a Printrbot Simple Metal as well but did not mention his instructions so I created a short tutorial below.
##Demo videos on Youtube
[](https://www.youtube.com/watch?v=PI1DXdU53Ps)
Playing the Singapore National Anthem.
[](https://www.youtube.com/watch?v=rh3QHoTB2Ts)
Portal Still Alive.
[](https://www.youtube.com/watch?v=FjlWI755P6U)
Birthday Song
[](https://www.youtube.com/watch?v=en3cRWAqXwg)
Fringe opening theme. The reference piano-video for this can be viewed [here](http://www.youtube.com/watch?v=oOMQ1LWBasw).
[](https://www.youtube.com/watch?v=QDdWfpenLZ4)
Rey's Theme (Star Wars). The reference piano-video for this can be viewed [here](https://www.youtube.com/watch?v=fGkkUm3OqCg).
The Gcode for these are placed inside ```gcode_files``` directory.
##How to convert a midi file for the Printrbot Simple Metal?
Not all midi files can be supported or be converted properly. If my understanding is correct, only 3 notes can be played concurrently at any one time as there are only 3 axes motors available. The code will randomly pick any three notes if there are too many concurrent note playbacks.
###1. Generate the Gcode file
```bash
git clone https://github.com/yeokm1/midi-to-simple-metal-gcode.git
cd midi-to-simple-metal-gcode
python mid2cnc.py -infile midi_files/national_anthem_singapore.mid -outfile gcode_files/singapore_national_anthem.gcode -machine custom -units metric -ppu 80 80 2020 -safemin 0 0 0 -safemax 120 120 120 -verbose
```
Replace the relevant paths with paths to your input and output file. I have set the bed size at a conservative 120mm x 120mm x 120mm although the Printrbot Simple Metal can go up to 150mm x 150mm x 150mm.
The "-verbose" argument is optional.
To know what each argument means, check out the original [readme file](README).
###2. Make some modifications to the generated Gcode file
Replace these lines
```bash
( Input file was xxx.mid )
G21 (Metric FTW)
G90 (Absolute posiitioning)
G92 X0 Y0 Z0 (set origin to current position)
G0 X0 Y0 Z0 F2000.0 (Pointless move to origin to reset feed rate to a sane value)
G04 P0.0000
```
with
```bash
G0 X0 Y0 Z0 F2000.0
G92 X0 Y0 Z0
```
The generated Gcode file seems a little "screwed" at the start because they set the origin at the current position then attempt to move to it (current position) which results in no movement. I removed the other stuff as they have no impact on the musical output.
###3. "Print" the Gcode
Send the Gcode file to your printer using your favourite 3D-printer control software. I happen to use Octoprint but others should work just as well.
##Dependencies
1. Python 2
2. Any 3D-Printer control software that allows you to send custom Gcode commands
##Motor Current notes
The volume the printer produces correlates to the motor current setting. You might want to increase the motor current before playing music then reduce the current later once you decide to use the 3D-printer as it was meant to do.
Send the following Gcodes if you wish to change the motor current setting
```
#To view the current setting
M909
#To set all motors to 90% of max current.
M907 X90 Y90 Z90 E90
#Save the current setting
M910
```
I normally set this after I have done playing
```
#To view the current setting
M909
#To set all motors to lower current levels to reduce noise
M907 X20 Y20 Z70 E30
#Save the current setting
M910
```
##Resources
1. [Singapore National Anthem Midi file](http://www.midiworld.com/download/4159)
2. [Imperial March on 3D Printer](http://zeroinnovations.com/3dprinting/how-to-play-the-imperial-march-on-a-3d-printer.html)
3. [Fringe Midi video](http://www.youtube.com/watch?v=oOMQ1LWBasw)
4. [Portal 2 Still Alive Score](http://sebastianwolff.info/blog/2008/12/still-alive-sheet-music/)
5. [Happy Birthday Midi file](http://www.geburtstagsvorlagen.de/musik/happy_birthday_midi_files.html)
6. [Original Rey's theme Midi source](https://www.youtube.com/watch?v=fGkkUm3OqCg) I modified the downloaded file to remove the second piano track to reduce the number of simultaneous notes so the printer can play them.
|
http://www.jewishworldreview.com | The New Year is not only a time for making resolutions; it is also a time for hoping for a better year. So here is one man's wish list.
Wish No. 1: All NBA players will get rid of their tattoos.
While I acknowledge that some wonderful people have a tattoo, as a rule, people with the amount of tattoos the average basketball player has are troubled souls. And given the behavior associated with many NBA players, they are not only troubled; they cause trouble.
Wish No. 2: The ACLU will create a leftist Boy Scouts.
The ACLU and other leftist groups are highly accomplished at destroying good institutions such as the Boy Scouts. But they rarely build good institutions. So instead of trying to destroy the Boy Scouts because the Scouts require its members to make an oath to God and country and because the Scouts believe that boys and men who publicly announce they are sexually attracted only to males should not be Scouts the ACLU should build something for boys in the image of its values. Since it is so easy to destroy, dear leftists, why not try to build? Start perhaps with a Progressive Boy Scouts that will have no oaths to God and will welcome all males who announce they are homosexual. Then one day we will see which Boy Scouts produces better people.
Wish No. 3: Celebrities will refrain from critically commenting on the war in Iraq.
Freedom of speech guarantees the right of every American, certainly including celebrities, to speak publicly on any subject they desire. But there would be something refreshing if the next time Susan Sarandon or Alec Baldwin were asked about the war in Iraq, they answered something like this: "I have an opinion and am flattered that you have asked me to express it. However, nothing about acting in movies gives me any greater insight into questions of war and peace than fixing faucets gives a plumber. Furthermore, in a divided country such as ours, surely the best thing I can do with my gift of an acting ability is to continue to make Americans laugh, cry, escape for two hours from their troubles, and visit our fighting men in Iraq and Afghanistan."
Wish No. 4: The home run and other batting records of Barry Bonds and other steroid-using Major League Baseball players will all have an asterisk affixed to them.
Speaking about the effects of steroids, the late baseball star Ken Caminiti told Sports Illustrated, "It's still a hand-eye coordination game, but the difference is the ball is going to go a little farther." Hence, the need for an asterisk.
Wish No. 5: All those Americans who said they would move to Canada if George W. Bush were re-elected will do so.
A number of Americans announced that if President Bush were re-elected, they would move to Canada. This is a fine idea for them, for Canada and for America. Canada (outside of Quebec) shares our language and is within driving distance of most Americans, yet is becoming completely European in its values secular, leftist, socialist, pro-redefining marriage, anti-military, pro-UN. American leftists would feel much more at home there. And Canada would love to have them. It is the most sparsely populated country in the world; they seek immigrants; and Americans already speak the language. Moreover, it is not terribly cold everywhere in Canada, even in winter. Americans who hate George W. Bush should give it some thought. And while we're wishing, let those Canadians who believe in Judeo-Christian values, fighting for freedom, small government and marriage involving a man and a woman move here. Then we can have two affluent countries sharing the same land mass and language develop each according to its values and see which produces a better place.
Wish No. 6: All those who drive in the left lane slower than drivers in the other lanes will be given fines and threatened with long prison sentences, perhaps even capital punishment.
There are things Americans can learn from Europe perhaps the most significant is how to drive properly. In Europe, driving schools apparently teach something that seems to be ignored in American driver's education that the left lane is for passing other cars, not for passing time.
Wish No. 7: Unless requested or it is particularly beautiful, no music, certainly not radio music, shall be played in restaurants.
No one no one dines out in order to hear rock music radio stations on lousy speakers. On the contrary, people dine out to escape noise and eat in silence either alone or in conversation with someone else. Unless the purpose of blaring cheap speakers in restaurants is to hasten the departure of customers so as to enable more customers to eat there, most restaurant music is a bane on civilization. |
/*
* Asqatasun - Automated webpage assessment
* Copyright (C) 2008-2020 Asqatasun.org
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU Affero General Public License as
* published by the Free Software Foundation, either version 3 of the
* License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Affero General Public License for more details.
*
* You should have received a copy of the GNU Affero General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
* Contact us by mail: asqatasun AT asqatasun DOT org
*/
package org.asqatasun.rules.accessiweb22;
import org.asqatasun.ruleimplementation.AbstractNotTestedRuleImplementation;
/**
* Implementation of the rule 12.10.3 of the referential Accessiweb 2.2.
* <br/>
* For more details about the implementation, refer to <a href="http://doc.asqatasun.org/en/90_Rules/accessiweb2.2/12.Navigation/Rule-12.10.3.html">the rule 12.10.3 design page.</a>
* @see <a href="http://www.accessiweb.org/index.php/accessiweb-22-english-version.html#test-12-10-3"> 12.10.3 rule specification</a>
*
* @author jkowalczyk
*/
public class Aw22Rule12103 extends AbstractNotTestedRuleImplementation {
/**
* Default constructor
*/
public Aw22Rule12103 () {
super();
}
}
|
var FFA = require('./FFA'); // Base gamemode
var Cell = require('../entity/Cell');
var Food = require('../entity/Food');
var Virus = require('../entity/Virus');
var VirusFeed = require('../entity/Virus').prototype.feed;
var MotherCell = require('../entity/MotherCell');
function Experimental() {
FFA.apply(this, Array.prototype.slice.call(arguments));
this.ID = 2;
this.name = "Experimental";
this.specByLeaderboard = true;
// Gamemode Specific Variables
this.nodesMother = [];
this.tickMother = 0;
this.tickMotherS = 0;
// Config
this.motherCellMass = 222;
this.motherUpdateInterval = 50; // How many ticks it takes to update the mother cell (1 tick = 50 ms)
this.motherSpawnInterval = 100; // How many ticks it takes to spawn another mother cell - Currently 5 seconds
this.motherMinAmount = 6;
}
module.exports = Experimental;
Experimental.prototype = new FFA();
// Gamemode Specific Functions
Experimental.prototype.updateMotherCells = function(gameServer) {
for (var i in this.nodesMother) {
var mother = this.nodesMother[i];
// Checks
mother.update(gameServer);
mother.checkEat(gameServer);
}
};
Experimental.prototype.spawnMotherCell = function(gameServer) {
// Checks if there are enough mother cells on the map
if (this.nodesMother.length < this.motherMinAmount) {
// Spawns a mother cell
var pos = gameServer.getRandomPosition();
// Check for players
for (var i = 0; i < gameServer.nodesPlayer.length; i++) {
var check = gameServer.nodesPlayer[i];
var r = check.getSize(); // Radius of checking player cell
// Collision box
var topY = check.position.y - r;
var bottomY = check.position.y + r;
var leftX = check.position.x - r;
var rightX = check.position.x + r;
// Check for collisions
if (pos.y > bottomY) {
continue;
}
if (pos.y < topY) {
continue;
}
if (pos.x > rightX) {
continue;
}
if (pos.x < leftX) {
continue;
}
// Collided
return;
}
// Spawn if no cells are colliding
var m = new MotherCell(gameServer.getNextNodeId(), null, pos, this.motherCellMass);
gameServer.addNode(m);
}
};
// Override
Experimental.prototype.onServerInit = function(gameServer) {
// Called when the server starts
gameServer.run = true;
var mapSize = gameServer.config.borderLeft + gameServer.config.borderRight +
gameServer.config.borderTop + gameServer.config.borderRight;
this.motherMinAmount = Math.ceil(mapSize / 3194.382825); // 7 mother cells for agar.io map size
gameServer.lleaderboard = true;
// Special virus mechanics
Virus.prototype.feed = function(feeder, gameServer) {
gameServer.removeNode(feeder);
// Pushes the virus
this.setAngle(feeder.getAngle()); // Set direction if the virus explodes
this.moveEngineTicks = 10; // Amount of times to loop the movement function
this.moveEngineSpeed = 28;
var index = gameServer.movingNodes.indexOf(this);
if (index == -1) {
gameServer.movingNodes.push(this);
}
};
// Override this
gameServer.getRandomSpawn = gameServer.getRandomPosition;
};
Experimental.prototype.onTick = function(gameServer) {
// Mother Cell updates
this.updateMotherCells(gameServer);
// Mother Cell Spawning
if (this.tickMotherS >= this.motherSpawnInterval) {
this.spawnMotherCell(gameServer);
this.tickMotherS = 0;
} else {
this.tickMotherS++;
}
};
Experimental.prototype.onChange = function(gameServer) {
// Remove all mother cells
for (var i in this.nodesMother) {
gameServer.removeNode(this.nodesMother[i]);
}
// Add back default functions
Virus.prototype.feed = VirusFeed;
gameServer.getRandomSpawn = require('../GameServer').prototype.getRandomSpawn;
};
|
Your kitchen is one of the most important areas of your home where you spend major time of the day. You never know when you experience the issue of Clogged Kitchen Sink. You might try several remedies, but these might worsen the condition. Hence, it is time to call a plumber. When you have a company like Plumber Rooter 247, you need not bother about anything. As one of the premier plumbing companies Serving Clogged Kitchen Sink Services Winter Garden Fl , we can assure you the best services at all times.
The problem of Clogged Kitchen Sink can be either major or minor. In the course of Serving Clogged Kitchen Sink Services Winter Garden Fl , we attend to any of these problems.
You will be happy to know that our Plumbing Rooter will always be there for you for any of your problems. This can include anything from Clogged Kitchen Sink to drain cleaning, installation, repairing or maintenance. You will just have to call our Plumber Serving Clogged Kitchen Sink Services Winter Garden Fl , and you will be glad to receive some of the highest quality services from us. Our clients are always satisfied with what we have to offer them every time. |
jsonp({"cep":"38700406","logradouro":"Rua S\u00e3o Jo\u00e3o Batista","bairro":"Nossa Senhora Aparecida","cidade":"Patos de Minas","uf":"MG","estado":"Minas Gerais"});
|
package com.chairbender.slackbot.resistance.game.state;
import com.chairbender.slackbot.resistance.game.model.Situation;
/**
* A state in which either the game is back to picking teams or the game has been completed.
*
* Created by chairbender on 11/20/2015.
*/
public class CompleteMissionState {
private Situation situation;
/**
*
* @param situation current situation, immediately after determining if the mission was a fail or success
*/
public CompleteMissionState(Situation situation) {
this.situation = situation;
}
/**
*
* @return true if the game is now over
*/
public boolean isGameOver() {
return situation.getMissionSuccess() == 3 || situation.getMissionFails() == 3;
}
/**
*
* @return true if the spies have won
*/
public boolean didSpiesWin() {
return situation.getMissionFails() == 3;
}
/**
*
* @return the pick team state after the mission has been completed with no game over. Null if
* the game is over.
*/
public PickTeamState getPickTeamState() {
if (isGameOver()) {
return null;
} else {
return new PickTeamState(situation);
}
}
}
|
'use strict';
define('forum/topic/delete-posts', [
'postSelect', 'alerts', 'api',
], function (postSelect, alerts, api) {
const DeletePosts = {};
let modal;
let deleteBtn;
let purgeBtn;
let tid;
DeletePosts.init = function () {
tid = ajaxify.data.tid;
$(window).off('action:ajaxify.end', onAjaxifyEnd).on('action:ajaxify.end', onAjaxifyEnd);
if (modal) {
return;
}
app.parseAndTranslate('partials/delete_posts_modal', {}, function (html) {
modal = html;
$('body').append(modal);
deleteBtn = modal.find('#delete_posts_confirm');
purgeBtn = modal.find('#purge_posts_confirm');
modal.find('.close,#delete_posts_cancel').on('click', closeModal);
postSelect.init(function () {
checkButtonEnable();
showPostsSelected();
});
showPostsSelected();
deleteBtn.on('click', function () {
deletePosts(deleteBtn, pid => `/posts/${pid}/state`);
});
purgeBtn.on('click', function () {
deletePosts(purgeBtn, pid => `/posts/${pid}`);
});
});
};
function onAjaxifyEnd() {
if (ajaxify.data.template.name !== 'topic' || ajaxify.data.tid !== tid) {
closeModal();
$(window).off('action:ajaxify.end', onAjaxifyEnd);
}
}
function deletePosts(btn, route) {
btn.attr('disabled', true);
Promise.all(postSelect.pids.map(pid => api.delete(route(pid), {})))
.then(closeModal)
.catch(alerts.error)
.finally(() => {
btn.removeAttr('disabled');
});
}
function showPostsSelected() {
if (postSelect.pids.length) {
modal.find('#pids').translateHtml('[[topic:fork_pid_count, ' + postSelect.pids.length + ']]');
} else {
modal.find('#pids').translateHtml('[[topic:fork_no_pids]]');
}
}
function checkButtonEnable() {
if (postSelect.pids.length) {
deleteBtn.removeAttr('disabled');
purgeBtn.removeAttr('disabled');
} else {
deleteBtn.attr('disabled', true);
purgeBtn.attr('disabled', true);
}
}
function closeModal() {
if (modal) {
modal.remove();
modal = null;
postSelect.disable();
}
}
return DeletePosts;
});
|
Junior Sam Woiteshek is back and better than ever in his second year on staff, serving as the Blade’s co-sports editor this time around. As a lifelong sports fan, Sam loves following the Michigan Wolverines and the Green Bay Packers, as well as the Chicago Blackhawks and the Grand Haven Buccaneers. In the summers, Sam can often be found out on a golf course, as he is an avid golfer and is on the Bucs golf team. Sam also enjoys duck hunting, fantasy football, and hanging out with family and friends. He is a master of word-searches and most likely can win in a game of chess. He also prides himself on his pizza-eating abilities and his talent of cooking Ramen noodles. Sam is excited to partake in leading the sports team this year, hopefully to the journalism equivalent of a Super Bowl. He is also eager to share some of his sports wisdom with the students of GHHS and will continue to deliver award-winning columns to his readers. |
// Copyright (c) 2008 The Board of Trustees of The Leland Stanford Junior University
// Copyright (c) 2011, 2012 Open Networking Foundation
// Copyright (c) 2012, 2013 Big Switch Networks, Inc.
// This library was generated by the LoxiGen Compiler.
// See the file LICENSE.txt which should have been included in the source distribution
// Automatically generated by LOXI from template of_class.java
// Do not modify
package org.projectfloodlight.openflow.protocol.ver13;
import org.projectfloodlight.openflow.protocol.*;
import org.projectfloodlight.openflow.protocol.action.*;
import org.projectfloodlight.openflow.protocol.actionid.*;
import org.projectfloodlight.openflow.protocol.bsntlv.*;
import org.projectfloodlight.openflow.protocol.errormsg.*;
import org.projectfloodlight.openflow.protocol.meterband.*;
import org.projectfloodlight.openflow.protocol.instruction.*;
import org.projectfloodlight.openflow.protocol.instructionid.*;
import org.projectfloodlight.openflow.protocol.match.*;
import org.projectfloodlight.openflow.protocol.oxm.*;
import org.projectfloodlight.openflow.protocol.queueprop.*;
import org.projectfloodlight.openflow.types.*;
import org.projectfloodlight.openflow.util.*;
import org.projectfloodlight.openflow.exceptions.*;
import org.slf4j.Logger;
import org.slf4j.LoggerFactory;
import java.util.Set;
import org.jboss.netty.buffer.ChannelBuffer;
import com.google.common.hash.PrimitiveSink;
import com.google.common.hash.Funnel;
class OFOxmMetadataVer13 implements OFOxmMetadata {
private static final Logger logger = LoggerFactory.getLogger(OFOxmMetadataVer13.class);
// version: 1.3
final static byte WIRE_VERSION = 4;
final static int LENGTH = 12;
private final static OFMetadata DEFAULT_VALUE = OFMetadata.NONE;
// OF message fields
private final OFMetadata value;
//
// Immutable default instance
final static OFOxmMetadataVer13 DEFAULT = new OFOxmMetadataVer13(
DEFAULT_VALUE
);
// package private constructor - used by readers, builders, and factory
OFOxmMetadataVer13(OFMetadata value) {
if(value == null) {
throw new NullPointerException("OFOxmMetadataVer13: property value cannot be null");
}
this.value = value;
}
// Accessors for OF message fields
@Override
public long getTypeLen() {
return 0x80000408L;
}
@Override
public OFMetadata getValue() {
return value;
}
@Override
public MatchField<OFMetadata> getMatchField() {
return MatchField.METADATA;
}
@Override
public boolean isMasked() {
return false;
}
public OFOxm<OFMetadata> getCanonical() {
// exact match OXM is always canonical
return this;
}
@Override
public OFMetadata getMask()throws UnsupportedOperationException {
throw new UnsupportedOperationException("Property mask not supported in version 1.3");
}
@Override
public OFVersion getVersion() {
return OFVersion.OF_13;
}
public OFOxmMetadata.Builder createBuilder() {
return new BuilderWithParent(this);
}
static class BuilderWithParent implements OFOxmMetadata.Builder {
final OFOxmMetadataVer13 parentMessage;
// OF message fields
private boolean valueSet;
private OFMetadata value;
BuilderWithParent(OFOxmMetadataVer13 parentMessage) {
this.parentMessage = parentMessage;
}
@Override
public long getTypeLen() {
return 0x80000408L;
}
@Override
public OFMetadata getValue() {
return value;
}
@Override
public OFOxmMetadata.Builder setValue(OFMetadata value) {
this.value = value;
this.valueSet = true;
return this;
}
@Override
public MatchField<OFMetadata> getMatchField() {
return MatchField.METADATA;
}
@Override
public boolean isMasked() {
return false;
}
@Override
public OFOxm<OFMetadata> getCanonical()throws UnsupportedOperationException {
throw new UnsupportedOperationException("Property canonical not supported in version 1.3");
}
@Override
public OFMetadata getMask()throws UnsupportedOperationException {
throw new UnsupportedOperationException("Property mask not supported in version 1.3");
}
@Override
public OFVersion getVersion() {
return OFVersion.OF_13;
}
@Override
public OFOxmMetadata build() {
OFMetadata value = this.valueSet ? this.value : parentMessage.value;
if(value == null)
throw new NullPointerException("Property value must not be null");
//
return new OFOxmMetadataVer13(
value
);
}
}
static class Builder implements OFOxmMetadata.Builder {
// OF message fields
private boolean valueSet;
private OFMetadata value;
@Override
public long getTypeLen() {
return 0x80000408L;
}
@Override
public OFMetadata getValue() {
return value;
}
@Override
public OFOxmMetadata.Builder setValue(OFMetadata value) {
this.value = value;
this.valueSet = true;
return this;
}
@Override
public MatchField<OFMetadata> getMatchField() {
return MatchField.METADATA;
}
@Override
public boolean isMasked() {
return false;
}
@Override
public OFOxm<OFMetadata> getCanonical()throws UnsupportedOperationException {
throw new UnsupportedOperationException("Property canonical not supported in version 1.3");
}
@Override
public OFMetadata getMask()throws UnsupportedOperationException {
throw new UnsupportedOperationException("Property mask not supported in version 1.3");
}
@Override
public OFVersion getVersion() {
return OFVersion.OF_13;
}
//
@Override
public OFOxmMetadata build() {
OFMetadata value = this.valueSet ? this.value : DEFAULT_VALUE;
if(value == null)
throw new NullPointerException("Property value must not be null");
return new OFOxmMetadataVer13(
value
);
}
}
final static Reader READER = new Reader();
static class Reader implements OFMessageReader<OFOxmMetadata> {
@Override
public OFOxmMetadata readFrom(ChannelBuffer bb) throws OFParseError {
// fixed value property typeLen == 0x80000408L
int typeLen = bb.readInt();
if(typeLen != (int) 0x80000408)
throw new OFParseError("Wrong typeLen: Expected=0x80000408L(0x80000408L), got="+typeLen);
OFMetadata value = OFMetadata.read8Bytes(bb);
OFOxmMetadataVer13 oxmMetadataVer13 = new OFOxmMetadataVer13(
value
);
if(logger.isTraceEnabled())
logger.trace("readFrom - read={}", oxmMetadataVer13);
return oxmMetadataVer13;
}
}
public void putTo(PrimitiveSink sink) {
FUNNEL.funnel(this, sink);
}
final static OFOxmMetadataVer13Funnel FUNNEL = new OFOxmMetadataVer13Funnel();
static class OFOxmMetadataVer13Funnel implements Funnel<OFOxmMetadataVer13> {
private static final long serialVersionUID = 1L;
@Override
public void funnel(OFOxmMetadataVer13 message, PrimitiveSink sink) {
// fixed value property typeLen = 0x80000408L
sink.putInt((int) 0x80000408);
message.value.putTo(sink);
}
}
public void writeTo(ChannelBuffer bb) {
WRITER.write(bb, this);
}
final static Writer WRITER = new Writer();
static class Writer implements OFMessageWriter<OFOxmMetadataVer13> {
@Override
public void write(ChannelBuffer bb, OFOxmMetadataVer13 message) {
// fixed value property typeLen = 0x80000408L
bb.writeInt((int) 0x80000408);
message.value.write8Bytes(bb);
}
}
@Override
public String toString() {
StringBuilder b = new StringBuilder("OFOxmMetadataVer13(");
b.append("value=").append(value);
b.append(")");
return b.toString();
}
@Override
public boolean equals(Object obj) {
if (this == obj)
return true;
if (obj == null)
return false;
if (getClass() != obj.getClass())
return false;
OFOxmMetadataVer13 other = (OFOxmMetadataVer13) obj;
if (value == null) {
if (other.value != null)
return false;
} else if (!value.equals(other.value))
return false;
return true;
}
@Override
public int hashCode() {
final int prime = 31;
int result = 1;
result = prime * result + ((value == null) ? 0 : value.hashCode());
return result;
}
}
|
Are you searching for an antivirus that can protect against any virus? Well, Kaspersky Anti-Virus 2013 is what you need. It is designed to offer all the important technologies of antivirus that are required by your PC. It is very easy and fast downloading, running and installing the antivirus into your computer and therefore is does require expertise. Some of the key features that come with the Kaspersky Anti-Virus 2013 include detecting any threats whether emerging, new or unknown. It is also able to prevent malware from vulnerable exploitation on the PC. In case of any phishing websites or suspicious websites, this antivirus can be able to identify it.
Kaspersky Lab introduced a breakthrough in its antivirus software suites in order to provide the most advanced technology in terms of computer security. The company proudly brings the Kaspersky AntiVirus 2013 in the market so that each computer user will have a hassle-free protection against all types of computer viruses, unknown threats, and malwares.
Installation of software is troublesome for some people. And this issue has been addressed by Kaspersky Lab through their effort to simplify the installation and download process of each antivirus suite they offer. The installation process will take two minutes of your time to complete and has only three screens that will pop-up. Registration and purchase of license can also be processed in the program itself. You don’t have to switch to your browser just to do these simple steps. They say that the installation process can be described as short, quick and easy.
The most important feature of the Kaspersky AntiVirus 2013 is its Automatic Exploit Prevention blocking engine. Just like any other anti-malware and antivirus engines, this blocking engine of the Kaspersky AntiVirus 2013 is designed to eliminate any phishing activities in your computer. This will lessen the chance of identity thefts and frauds in your online banks. This Automatic Exploit Prevention blocking engine has a major component called as Address Space Layout Randomization (ASLR). The ASLR is a security technology that has been proven to protect various operating systems such as Windows 8, Apple OS X and iOS, and Android of Google.
To fully protect your credit card and banking information, the Kaspersky AntiVirus 2013 Safe Money feature has been upgraded as well. This feature automatically detects if you are accessing the website of major banks and local credit unions. Once the Safe Money determined that the site you visited is a bank’s website, the site will be reopened in a sandboxed browser where protection of your sensitive personal information is prioritized.
Unlike any other antivirus software available in the market, the Kaspersky AntiVirus 2013 does not affect the performance of your computer. You will still receive the best network activity that you always want even though the software is operating silently in the background. If ever you are a gamer and want to have an interrupted experience in your computer, you can set the Kaspersky AntiVirus 2013 in the Gamer Mode and still you will be secured and protected against any type of vulnerabilities. That’s enjoyment and comfort at the same time. |
'use strict';
const proxyquire = require('proxyquire');
describe('bootstrap', () => {
let premiddleware,
app,
db,
appEnv,
result;
const controllers = {};
beforeEach(() => {
premiddleware = env.stub();
db = env.stub();
appEnv = {
DB_URL: 'db-url'
};
const sut = proxyquire('./index', {
'../controllers': controllers,
'./preMiddleware': premiddleware,
'./db': db,
'../../../env': appEnv
});
app = {
use: env.spy(() => app)
};
result = sut(app);
});
it('should connect to database', () => {
db.should.been.calledWith(appEnv.DB_URL);
});
it('should add premiddleware to app', () => {
premiddleware.should.been.calledWith(app);
});
it('should add controllers to app', () => {
app.use.should.been.calledWith(controllers);
});
it('should return app instance', () => {
result.should.equal(app);
});
});
|
export function getCSRFfromHead() {
if (process.env.NODE_ENV === 'test') {
return "csrf_token";
} else {
return document.querySelector("meta[name=csrf-token]").content;
}
}
|
Health and Safety Representatives (HSRs) play an important role in ensuring a safe and healthy work environment and are the ideal means for representing workers in health and safety consultations with the organisation. However, in order for HSRs to improve health and safety in the workplace, they need to understand how to meet their responsibilities.
This course has therefore been designed to provide the learner with basic information on their functions and powers as an HSR. It is not, however, an approved HSR training course as per the Work Health and Safety Act.
Discuss what training they need to fulfil their role as an HSR. |
CFA is happy Steven Salaita has accepted the settlement approved by the Board of Trustees. Compensating Dr. Salaita, however, is only a first step. Two major concerns remain unresolved.
First, the damage inflicted on the American Indian Studies Program must be made good. We call upon Chancellor Wilson and Dean Ross of the College of LAS to make recommendations about how at a minimum to restore the AIS Program to its former strength both in faculty lines and programming capacities. We also call upon Chancellor Wilson to take steps to move this campus decisively beyond the "Chief" era - through continued education, and by eliminating the use of music associated with the "dance" of the Chief during sports events.
Second, the intrusion of the Board of Trustees into academic policy and hiring decisions remains a serious problem. The prospect of such intrusions has increased rather than decreased, over the past year. The Board now asserts a right to intervene in any individual hiring case. Further, with their decision to subject every faculty hire to a background check, the Board has added a new hurdle in the hiring process - a hurdle with a racially discriminatory effect.
This university does not need a more interventionist Board in faculty hiring. We appeal to the Board of Trustees to explicitly delegate faculty hiring decisions to each campus, and to repeal their blanket background check policy. |
/* ph stamps */
/* /^.*$/ */
/* endph */
/* stamp withSeedsSymbol */
const generateSeeds = Symbol("generateSeeds");
/* endstamp */
export default class Kiwi {
constructor() {
/* ph constructor */
this[generateSeeds](4, 6);
/* endph */
}
/* stamp withSeeds */
[generateSeeds](min, max) {
this.seeds = Math.floor((Math.random() * ((max + 1) - min + 1)) + min);
}
/* endstamp */
eat() {
/* ph onomatopoeia */
return "yum";
/* endph */
}
/* stamp throwAway */
throwAway() {
return "done";
}
/* endstamp */
}
/* ph deprecated */
/* name: replacements */
/* content: */
/* endph */
|
<?php
/*
* This file is part of the BringApi package.
*
* (c) Martin Madsen <[email protected]>
*
* For the full copyright and license information, please view the LICENSE
* file that was distributed with this source code.
*/
namespace Crakter\BringApi\Entity;
use ReflectionObject;
use ReflectionProperty;
use Crakter\BringApi\DefaultData\ValidateParameters;
use Crakter\BringApi\Exception\ApiEntityNotCorrectException;
/**
* BringApi ApiEntityBase
*
* A facility for Entity classes to be extended from
*
* Quick setup: <code>class ReportsEntity extends ApiEntityBase {}</code>
*
* @author Martin Madsen <[email protected]>
*/
abstract class ApiEntityBase
{
/**
* @param string $validateParameters Validation parameters
*/
protected $validateParameters = [];
/**
* @param string $xmlRootName Set the Name of Root XML
*/
protected $xmlRootName = 'Entity';
/**
* Sets the validateParameter.
* @param string $name
* @param string $value
*/
protected function setValidateParameter(string $name, string $value): ApiEntityInterface
{
$this->validateParameters[$name] = $value;
return $this;
}
/**
* Gets the validateParameters
* @return array
*/
public function getValidateParameters(): array
{
return $this->validateParameters;
}
/**
* Sets the required Parameters, if you need extra checking.
* @param array $parameters list of required variables from ListAvailableReportsCustomer
* @return ApiEntityInterface
*/
public function setRequiredParameters(array $parameters): ApiEntityInterface
{
foreach ($parameters as $name) {
$this->setValidateParameter($name, ValidateParameters::NOT_NULL);
}
return $this;
}
/**
* Check if values are according to validateParameters and all values must have a value, cannot be empty
* @param array $result
*/
private function checkValues(array $result): bool
{
if (!empty($this->getValidateParameters())) {
foreach ($this->validateParameters as $key => $valid) {
foreach ($result as $k => $v) {
$checked[] = $k;
// Do not check if these values is set as these should of been checked.
if (is_array($v)) {
continue;
} else {
if ((!isset($v) || $v === null) && $valid == ValidateParameters::NOT_NULL) {
throw new ApiEntityNotCorrectException(sprintf('%s is not allowed to be empty in %s', $k, __CLASS__));
}
}
}
if (!in_array($key, $checked)) {
throw new ApiEntityNotCorrectException(sprintf('%s must be set in %s', $key, __CLASS__));
}
}
}
return true;
}
/**
* toArray returnes the object at hand in form of an Array
* @see ApiEntityBase::checkValues();
* @return array
*/
public function toArray(): array
{
$result = [];
$props = (new ReflectionObject($this))->getProperties(ReflectionProperty::IS_PUBLIC);
foreach ($props as $prop) {
$name = $prop->getName();
$value = $prop->getValue($this);
$result[$name] = $value;
$this->setValidateParameter($name, ValidateParameters::NOT_NULL);
}
$this->checkValues($result);
return $result;
}
/**
* toXml returnes the object at hand in form of an xml string
* @return string
*/
public function toXml(): string
{
$xml = new \SimpleXMLElement("<{$this->xmlRootName}/>");
$result = $this->toArray();
$this->recursiveXml($xml, $result);
$dom = new \DOMDocument('1.0');
$dom->preserveWhiteSpace = false;
$dom->formatOutput = true;
$dom->loadXML($xml->asXML());
return $dom->saveXML();
}
/**
* Recursive XML function to loop through all values.
* @param SimpleXMLElement $object
* @param array $data
* @return void
*/
private function recursiveXml(\SimpleXMLElement $object, array $data): bool
{
foreach ($data as $key => $value) {
if (is_array($value)) {
$new_object = $object->addChild($key);
$this->recursiveXml($new_object, $value);
} else {
$object->addChild($key, $value);
}
}
return true;
}
/**
* Sets variables in class to be used by toArray()
* @param array $entries
* @return ApiEntityInterface
*/
public function set(array $entries): ApiEntityInterface
{
foreach ($entries as $key => $var) {
$this->{$key} = $var;
}
return $this;
}
/**
* Sets automagically values in class
* @param string $name
* @param mixed $value
* @return ApiEntityInterface
*/
public function __set(string $name, $value): ApiEntityInterface
{
$this->{$name} = $value;
return $this;
}
/**
* Gets automagically values in class
* @param string $name
* @return mixed
*/
public function __get(string $name)
{
return $this->{$name};
}
/**
* We don't know which variables for the reports API that needs to be set as it's different on each report
* This function settles it so you can use ->setFromDate('01.01.2017');
* @param string $name name of the variable needed or you want to set
* @param array $value value that needs to be set
* @return string|array|ApiEntityInterface
*/
public function __call(string $name, array $value)
{
$var = lcfirst(substr($name, 3));
if (strncasecmp($name, "get", 3) === 0) {
return $this->{$var} ?? '';
}
if (strncasecmp($name, "set", 3) === 0) {
$this->{$var} = $value[0];
}
return $this;
}
}
|
#ifndef CRASHDUMP_H
#define CRASHDUMP_H
extern int get_crash_notes_per_cpu(int cpu, uint64_t *addr, uint64_t *len);
extern int get_kernel_vmcoreinfo(uint64_t *addr, uint64_t *len);
extern int get_xen_vmcoreinfo(uint64_t *addr, uint64_t *len);
/* Need to find a better way to determine per cpu notes section size. */
#define MAX_NOTE_BYTES 1024
/* Expecting ELF headers to fit in 16K. Increase it if you need more. */
#define KCORE_ELF_HEADERS_SIZE 16384
/* The address of the ELF header is passed to the secondary kernel
* using the kernel command line option memmap=nnn.
* The smallest unit the kernel accepts is in kilobytes,
* so we need to make sure the ELF header is aligned to 1024.
*/
#define ELF_CORE_HEADER_ALIGN 1024
/* structure passed to crash_create_elf32/64_headers() */
struct crash_elf_info {
unsigned long class;
unsigned long data;
unsigned long machine;
unsigned long backup_src_start;
unsigned long backup_src_end;
unsigned long long page_offset;
unsigned long long kern_vaddr_start;
unsigned long long kern_paddr_start;
unsigned long kern_size;
unsigned long lowmem_limit;
int (*get_note_info)(int cpu, uint64_t *addr, uint64_t *len);
};
int crash_create_elf32_headers(struct kexec_info *info,
struct crash_elf_info *elf_info,
struct memory_range *range, int ranges,
void **buf, unsigned long *size,
unsigned long align);
int crash_create_elf64_headers(struct kexec_info *info,
struct crash_elf_info *elf_info,
struct memory_range *range, int ranges,
void **buf, unsigned long *size,
unsigned long align);
unsigned long crash_architecture(struct crash_elf_info *elf_info);
unsigned long phys_to_virt(struct crash_elf_info *elf_info,
unsigned long paddr);
int xen_present(void);
unsigned long xen_architecture(struct crash_elf_info *elf_info);
int xen_get_nr_phys_cpus(void);
int xen_get_note(int cpu, uint64_t *addr, uint64_t *len);
#endif /* CRASHDUMP_H */
|
Anna of Schweidnitz (Świdnica) (also known as Anne or Anna of Świdnica, Czech: Anna Svídnická, Polish: Anna Świdnicka, German: Anna von Schweidnitz und Jauer) (Świdnica, 1339 – 11 July 1362 in Prague) was Queen of Bohemia, German Queen, and Empress of the Holy Roman Empire. She was the third wife of Emperor Charles IV.
Anne was the daughter of Polish Duke Henry II of Świdnica-Jawor from the Silesian branch of the Piast dynasty. Her mother was Katherine of Hungary, the daughter of Charles I of Hungary. In his autobiography written in Latin, which covers only his youth prior to getting married to Anna, emperor Charles mentions civitatem Swidnitz and dux Swidnicensis, as depicted in the coat of arms room of his Wenzelschloss castle at Lauf an der Pegnitz near Nuremberg.
Anne's father died when she was four years old, and her childless uncle, Bolko II, Duke of Świdnica-Jawor became her guardian. She was brought up and educated by her mother at Visegrád in Hungary. At the age of 11, Anne had been promised to Wenceslaus, newborn son and successor to Charles IV. After the infant Wenceslaus and his mother Anna of the Palatinate died, the now-widowed Emperor asked to marry Anne himself. The planned marriage was part of the strategies devised by Charles and his then-deceased father John to gain control of the Piast Duchies of Silesia as vedlejší země ("neighboring countries") for the Kingdom of Bohemia. Anne's uncle, Louis of Hungary, the future King of Poland, was able to assist her by renouncing his rights to Świdnica in favor of the House of Luxemburg.
At the instigation of archbishop Arnošt of Pardubice, Pope Innocent VI issued a dispensation for the marriage, which was required because of the degree of relationship between the bride and groom (they were second cousins once removed through their common ancestors Rudolph I of Germany and Gertrude of Hohenburg). The two were married on 27 May 1353, when Anne was 14; her new husband was 37. The wedding was attended by Anne's guardian Bolko II of Świdnica, Duke Albert II of Austria, King Louis of Hungary, Margrave Louis of Brandenburg, Duke Rudolf of Saxony, an envoy of King Casimir III of Poland, and an envoy of the Republic of Venice.
On 28 July 1353, Anna was crowned Queen of Bohemia in Prague by Archbishop Arnošt of Pardubice. On 9 February 1354, in Aachen, she was crowned German queen. As part of the coronation of Charles as Holy Roman Emperor on 5 April 1355, in the Roman Basilica of Saint Peter, Anne was crowned Empress of the Holy Roman Empire. She was thereby the first Queen of Bohemia to become Empress.
In 1358, Anne bore a daughter, Elisabeth, who was named after Elisabeth of Bohemia (1292–1330). In February 1361 she became mother of the desired successor to the throne, Wenceslaus, who was born in Nuremberg, and baptized on 11 April in the Sebalduskirche by the Archbishops of Prague, Cologne, and Mainz. She did not live to see the coronation of the two-year-old Wenceslaus, however. At age 23, she died in childbirth on 11 July 1362. She is buried in St. Vitus Cathedral. The emperor married Elisabeth of Pomerania one year later. The Duchies of Świdnica and Jawor passed to Bohemia after Bolko's death in 1368.
Wikimedia Commons has media related to Anna von Schweidnitz.
This page was last edited on 27 February 2019, at 22:34 (UTC). |
Document! X delivers the best of both worlds by seamlessly combining automatic documentation of compiled COM components, controls or Type Libraries with a full WYSIWYG authoring environment. The generated COM documentation is an accurate and comprehensive documentation set for your components covering classes, structs, interfaces, methods, properties and events.
Document! X will use any existing COM HelpString attributes (the descriptive attributes compiled into the component for Intellisense tooltips) where available. If you have defined Help Context IDs for your COM Components members, Document! X will ensure that all topics are given matching Context IDs such that context sensitive help called when the component is being used will invoke the correct help topic.
If you have already defined HelpStrings in your COM Component or Type Library, Document! X can use them as summary text for the generated documentation and you can view the HelpStrings whilst you are editing to spot areas that need expansion and avoid duplication.
You can choose to author content in your component HelpString attributes, and/or using the rich authoring environment of the Document! X Content File editor. This flexibility allows you to include basic descriptive documentation in the source code and use the rich Document! X Content File editor to author extended content.
COM documentation templates are provided reflecting the Visual Studio 2008 and 2012 documentation styles. Documentation you generate will be familiar in structure, layout, style and functionality to your COM developers. |
(function() {
var filterType = document.getElementById('filterType');
var classFilter = document.getElementById('ClassFilter');
var classList = document.getElementById('ClassList');
function filter() {
var value = classFilter.value.toLowerCase();
var items = classList.getElementsByTagName('li');
for (var i = 0; i < items.length; i++) {
var item = items[i];
var itemName = item.getAttribute('data-name') || '';
itemName = itemName.toLowerCase().replace(/\s/g, '');
if (itemName.indexOf(value) >= 0) {
item.style.display = '';
} else {
item.style.display = 'none';
}
}
}
classFilter.onkeyup = filter;
function getQueryParameter(name) {
var match = new RegExp('[?&]' + name + '=([^&]*)').exec(window.location.search);
return match && decodeURIComponent(match[1].replace(/\+/g, ' '));
}
var show = getQueryParameter('show');
if (show) {
document.getElementById('filterType').value = show;
}
var searchTerm = getQueryParameter('classFilter') || '';
classFilter.value = searchTerm;
filter();
function resetFilter() {
classFilter.value = '';
filter();
}
function updateMenuLinks() {
var links = classList.getElementsByTagName('a');
var searchTerm = classFilter.value;
for (var i = 0; i < links.length; i++) {
var link = links[i];
var prefix = link.href.split('?')[0];
link.href = prefix + (searchTerm === '' ? '' : '?classFilter=' + searchTerm);
}
}
var menuLinks = classList.getElementsByTagName('a');
for (var i = 0; i < menuLinks.length; i++) {
menuLinks[i].onclick = function() {
updateMenuLinks();
}
}
})(); |
# Marasmius brunneigracilis var. gracilior Corner VARIETY
#### Status
ACCEPTED
#### According to
Index Fungorum
#### Published in
Nova Hedwigia, Beih. 111: 39 (1996)
#### Original name
Marasmius brunneigracilis var. gracilior Corner
### Remarks
null |
Gabiluso is one of the greatest spies in his country. Now he's trying to complete an “impossible” mission - to make it slow for the army of City Colugu to reach the airport. City Colugu has n bus stations and m roads. Each road connects two bus stations directly, and all roads are one way streets. In order to keep the air clean, the government bans all military vehicles. So the army must take buses to go to the airport. There may be more than one road between two bus stations. If a bus station is destroyed, all roads connecting that station will become no use. What's Gabiluso needs to do is destroying some bus stations to make the army can't get to the airport in k minutes. It takes exactly one minute for a bus to pass any road. All bus stations are numbered from 1 to n. The No.1 bus station is in the barrack and the No. n station is in the airport. The army always set out from the No. 1 station.
No.1 station and No. n station can't be destroyed because of the heavy guard. Of course there is no road from No.1 station to No. n station.
Please help Gabiluso to calculate the minimum number of bus stations he must destroy to complete his mission.
There are several test cases. Input ends with three zeros.
Then m lines follows. Each line contains 2 integers, s and f, indicating that there is a road from station No. s to station No. f.
For each test case, output the minimum number of stations Gabiluso must destroy. |
<!DOCTYPE html>
<html>
<head>
<meta charset="utf-8">
<meta http-equiv="X-UA-Compatible" content="IE=edge,chrome=1">
<title>PowerEditor_v0.1</title>
<meta name="description" content="">
<meta name="viewport" content="width=device-width, initial-scale=1.0">
<link rel="stylesheet" href="css/main.css">
</head>
<body>
<!-- navigation bar -->
<div class="navbar navbar-inverse navbar-fixed-top">
<div class="navbar-inner">
<div class="container">
<a class="brand" href="#">PowerEditor</a><!-- product name -->
<div class="nav-collapse collapse">
<ul class="nav">
<li class="active"><a href="#">产品编辑</a></li>
<li><a href="#">产品管理</a></li>
<li><a href="#">素材管理</a></li>
</ul>
</div><!--/.nav-collapse -->
</div>
</div>
</div>
<!-- edit module -->
<div class="show-grid ">
<div id="thumbnails" class="span2"><!--left column-->
<div id="playbox" class="btn-toolbar"><!--play toolbar-->
<div class="btn-group">
<a id="new_page" class="btn" href="javascript:void(0);" title="New Page"><i class="icon-file"></i></a>
<a id="delete_page" class="btn" href="javascript:void(0);" title="Delete Page"><i class="icon-trash"></i></a>
<a id="play_slide" class="btn" href="javascript:void(0);" title="Play Pages"><i class="icon-play"></i></a>
<a id="export_slide" class="btn" href="javascript:void(0);" title="Export Pages"><i class="icon-share"></i></a>
</div>
</div>
<div id="slides" ></div><!--slides thumbnails-->
</div>
<div id="centerstage" class="span8"><!--center column-->
<div id="totalcanvas"><!--the container to hold the content of current page-->
</div>
</div>
<div id="proptpanel" class="span2"><!--right column-->
<div id="toolbar" class="btn-toolbar"><!--edit toolbar-->
<div class="btn-group">
<a id="add_html" class="btn" href="javascript:void(0);" title="Add HTML..."><i class="icon-tags"></i></a>
<a id="add_image" class="btn" href="javascript:void(0);" title="Add Image..."><i class="icon-picture"></i></a>
<a id="add_video" class="btn" href="javascript:void(0);" title="Add Video..."><i class="icon-film"></i></a>
<a id="add_audio" class="btn" href="javascript:void(0);" title="Add Audio..."><i class="icon-volume-up"></i></a>
</div>
</div>
<div id="properties" ><!--element properties editor-->
<p style="color:#0000FF">Properties Editor</p>
</div>
<div id="events" ><!--element events editor-->
<p style="color:#0000FF">Events Editor</p>
</div>
<div id="effects" ><!--element effects editor-->
<p style="color:#0000FF">Effects Editor</p>
</div>
</div>
</div><!-- /row -->
<!-- logic -->
<script type="text/javascript">
var SERVICE_URL = '/snms/seviceapi';
</script>
<script src="bower_components/jquery/jquery.js"></script>
<script src="bower_components/requirejs/require.js" data-main="js/main.js"></script>
</body>
</html>
|
// Copyright (c) 2012 The Chromium Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.
#include "net/http/partial_data.h"
#include "base/bind.h"
#include "base/bind_helpers.h"
#include "base/format_macros.h"
#include "base/logging.h"
#include "base/strings/string_number_conversions.h"
#include "base/strings/string_util.h"
#include "base/strings/stringprintf.h"
#include "net/base/net_errors.h"
#include "net/disk_cache/disk_cache.h"
#include "net/http/http_response_headers.h"
#include "net/http/http_util.h"
namespace net {
namespace {
// The headers that we have to process.
const char kLengthHeader[] = "Content-Length";
const char kRangeHeader[] = "Content-Range";
const int kDataStream = 1;
} // namespace
// A core object that can be detached from the Partialdata object at destruction
// so that asynchronous operations cleanup can be performed.
class PartialData::Core {
public:
// Build a new core object. Lifetime management is automatic.
static Core* CreateCore(PartialData* owner) {
return new Core(owner);
}
// Wrapper for Entry::GetAvailableRange. If this method returns ERR_IO_PENDING
// PartialData::GetAvailableRangeCompleted() will be invoked on the owner
// object when finished (unless Cancel() is called first).
int GetAvailableRange(disk_cache::Entry* entry, int64 offset, int len,
int64* start);
// Cancels a pending operation. It is a mistake to call this method if there
// is no operation in progress; in fact, there will be no object to do so.
void Cancel();
private:
explicit Core(PartialData* owner);
~Core();
// Pending io completion routine.
void OnIOComplete(int result);
PartialData* owner_;
int64 start_;
DISALLOW_COPY_AND_ASSIGN(Core);
};
PartialData::Core::Core(PartialData* owner)
: owner_(owner), start_(0) {
DCHECK(!owner_->core_);
owner_->core_ = this;
}
PartialData::Core::~Core() {
if (owner_)
owner_->core_ = NULL;
}
void PartialData::Core::Cancel() {
DCHECK(owner_);
owner_ = NULL;
}
int PartialData::Core::GetAvailableRange(disk_cache::Entry* entry, int64 offset,
int len, int64* start) {
int rv = entry->GetAvailableRange(
offset, len, &start_, base::Bind(&PartialData::Core::OnIOComplete,
base::Unretained(this)));
if (rv != ERR_IO_PENDING) {
// The callback will not be invoked. Lets cleanup.
*start = start_;
delete this;
}
return rv;
}
void PartialData::Core::OnIOComplete(int result) {
if (owner_)
owner_->GetAvailableRangeCompleted(result, start_);
delete this;
}
// -----------------------------------------------------------------------------
PartialData::PartialData()
: current_range_start_(0),
current_range_end_(0),
cached_start_(0),
resource_size_(0),
cached_min_len_(0),
range_present_(false),
final_range_(false),
sparse_entry_(true),
truncated_(false),
initial_validation_(false),
core_(NULL) {
}
PartialData::~PartialData() {
if (core_)
core_->Cancel();
}
bool PartialData::Init(const HttpRequestHeaders& headers) {
std::string range_header;
if (!headers.GetHeader(HttpRequestHeaders::kRange, &range_header))
return false;
std::vector<HttpByteRange> ranges;
if (!HttpUtil::ParseRangeHeader(range_header, &ranges) || ranges.size() != 1)
return false;
// We can handle this range request.
byte_range_ = ranges[0];
if (!byte_range_.IsValid())
return false;
current_range_start_ = byte_range_.first_byte_position();
DVLOG(1) << "Range start: " << current_range_start_ << " end: " <<
byte_range_.last_byte_position();
return true;
}
void PartialData::SetHeaders(const HttpRequestHeaders& headers) {
DCHECK(extra_headers_.IsEmpty());
extra_headers_.CopyFrom(headers);
}
void PartialData::RestoreHeaders(HttpRequestHeaders* headers) const {
DCHECK(current_range_start_ >= 0 || byte_range_.IsSuffixByteRange());
int64 end = byte_range_.IsSuffixByteRange() ?
byte_range_.suffix_length() : byte_range_.last_byte_position();
headers->CopyFrom(extra_headers_);
if (truncated_ || !byte_range_.IsValid())
return;
if (current_range_start_ < 0) {
headers->SetHeader(HttpRequestHeaders::kRange,
HttpByteRange::Suffix(end).GetHeaderValue());
} else {
headers->SetHeader(HttpRequestHeaders::kRange,
HttpByteRange::Bounded(
current_range_start_, end).GetHeaderValue());
}
}
int PartialData::ShouldValidateCache(disk_cache::Entry* entry,
const CompletionCallback& callback) {
DCHECK_GE(current_range_start_, 0);
// Scan the disk cache for the first cached portion within this range.
int len = GetNextRangeLen();
if (!len)
return 0;
DVLOG(3) << "ShouldValidateCache len: " << len;
if (sparse_entry_) {
DCHECK(callback_.is_null());
Core* core = Core::CreateCore(this);
cached_min_len_ = core->GetAvailableRange(entry, current_range_start_, len,
&cached_start_);
if (cached_min_len_ == ERR_IO_PENDING) {
callback_ = callback;
return ERR_IO_PENDING;
}
} else if (!truncated_) {
if (byte_range_.HasFirstBytePosition() &&
byte_range_.first_byte_position() >= resource_size_) {
// The caller should take care of this condition because we should have
// failed IsRequestedRangeOK(), but it's better to be consistent here.
len = 0;
}
cached_min_len_ = len;
cached_start_ = current_range_start_;
}
if (cached_min_len_ < 0)
return cached_min_len_;
// Return a positive number to indicate success (versus error or finished).
return 1;
}
void PartialData::PrepareCacheValidation(disk_cache::Entry* entry,
HttpRequestHeaders* headers) {
DCHECK_GE(current_range_start_, 0);
DCHECK_GE(cached_min_len_, 0);
int len = GetNextRangeLen();
DCHECK_NE(0, len);
range_present_ = false;
headers->CopyFrom(extra_headers_);
if (!cached_min_len_) {
// We don't have anything else stored.
final_range_ = true;
cached_start_ =
byte_range_.HasLastBytePosition() ? current_range_start_ + len : 0;
}
if (current_range_start_ == cached_start_) {
// The data lives in the cache.
range_present_ = true;
current_range_end_ = cached_start_ + cached_min_len_ - 1;
if (len == cached_min_len_)
final_range_ = true;
headers->SetHeader(
HttpRequestHeaders::kRange,
HttpByteRange::Bounded(current_range_start_, current_range_end_)
.GetHeaderValue());
} else {
// This range is not in the cache.
current_range_end_ = cached_start_ - 1;
headers->SetHeader(
HttpRequestHeaders::kRange,
HttpByteRange::Bounded(current_range_start_, current_range_end_)
.GetHeaderValue());
}
}
bool PartialData::IsCurrentRangeCached() const {
return range_present_;
}
bool PartialData::IsLastRange() const {
return final_range_;
}
bool PartialData::UpdateFromStoredHeaders(const HttpResponseHeaders* headers,
disk_cache::Entry* entry,
bool truncated) {
resource_size_ = 0;
if (truncated) {
DCHECK_EQ(headers->response_code(), 200);
// We don't have the real length and the user may be trying to create a
// sparse entry so let's not write to this entry.
if (byte_range_.IsValid())
return false;
if (!headers->HasStrongValidators())
return false;
// Now we avoid resume if there is no content length, but that was not
// always the case so double check here.
int64 total_length = headers->GetContentLength();
if (total_length <= 0)
return false;
truncated_ = true;
initial_validation_ = true;
sparse_entry_ = false;
int current_len = entry->GetDataSize(kDataStream);
byte_range_.set_first_byte_position(current_len);
resource_size_ = total_length;
current_range_start_ = current_len;
cached_min_len_ = current_len;
cached_start_ = current_len + 1;
return true;
}
if (headers->response_code() != 206) {
DCHECK(byte_range_.IsValid());
sparse_entry_ = false;
resource_size_ = entry->GetDataSize(kDataStream);
DVLOG(2) << "UpdateFromStoredHeaders size: " << resource_size_;
return true;
}
if (!headers->HasStrongValidators())
return false;
int64 length_value = headers->GetContentLength();
if (length_value <= 0)
return false; // We must have stored the resource length.
resource_size_ = length_value;
// Make sure that this is really a sparse entry.
return entry->CouldBeSparse();
}
void PartialData::SetRangeToStartDownload() {
DCHECK(truncated_);
DCHECK(!sparse_entry_);
current_range_start_ = 0;
cached_start_ = 0;
initial_validation_ = false;
}
bool PartialData::IsRequestedRangeOK() {
if (byte_range_.IsValid()) {
if (!byte_range_.ComputeBounds(resource_size_))
return false;
if (truncated_)
return true;
if (current_range_start_ < 0)
current_range_start_ = byte_range_.first_byte_position();
} else {
// This is not a range request but we have partial data stored.
current_range_start_ = 0;
byte_range_.set_last_byte_position(resource_size_ - 1);
}
bool rv = current_range_start_ >= 0;
if (!rv)
current_range_start_ = 0;
return rv;
}
bool PartialData::ResponseHeadersOK(const HttpResponseHeaders* headers) {
if (headers->response_code() == 304) {
if (!byte_range_.IsValid() || truncated_)
return true;
// We must have a complete range here.
return byte_range_.HasFirstBytePosition() &&
byte_range_.HasLastBytePosition();
}
int64 start, end, total_length;
if (!headers->GetContentRange(&start, &end, &total_length))
return false;
if (total_length <= 0)
return false;
DCHECK_EQ(headers->response_code(), 206);
// A server should return a valid content length with a 206 (per the standard)
// but relax the requirement because some servers don't do that.
int64 content_length = headers->GetContentLength();
if (content_length > 0 && content_length != end - start + 1)
return false;
if (!resource_size_) {
// First response. Update our values with the ones provided by the server.
resource_size_ = total_length;
if (!byte_range_.HasFirstBytePosition()) {
byte_range_.set_first_byte_position(start);
current_range_start_ = start;
}
if (!byte_range_.HasLastBytePosition())
byte_range_.set_last_byte_position(end);
} else if (resource_size_ != total_length) {
return false;
}
if (truncated_) {
if (!byte_range_.HasLastBytePosition())
byte_range_.set_last_byte_position(end);
}
if (start != current_range_start_)
return false;
if (!current_range_end_) {
// There is nothing in the cache.
DCHECK(byte_range_.HasLastBytePosition());
current_range_end_ = byte_range_.last_byte_position();
if (current_range_end_ >= resource_size_) {
// We didn't know the real file size, and the server is saying that the
// requested range goes beyond the size. Fix it.
current_range_end_ = end;
byte_range_.set_last_byte_position(end);
}
}
// If we received a range, but it's not exactly the range we asked for, avoid
// trouble and signal an error.
if (end != current_range_end_)
return false;
return true;
}
// We are making multiple requests to complete the range requested by the user.
// Just assume that everything is fine and say that we are returning what was
// requested.
void PartialData::FixResponseHeaders(HttpResponseHeaders* headers,
bool success) {
if (truncated_)
return;
if (byte_range_.IsValid() && success) {
headers->UpdateWithNewRange(byte_range_, resource_size_, !sparse_entry_);
return;
}
headers->RemoveHeader(kLengthHeader);
headers->RemoveHeader(kRangeHeader);
if (byte_range_.IsValid()) {
headers->ReplaceStatusLine("HTTP/1.1 416 Requested Range Not Satisfiable");
headers->AddHeader(base::StringPrintf("%s: bytes 0-0/%" PRId64,
kRangeHeader, resource_size_));
headers->AddHeader(base::StringPrintf("%s: 0", kLengthHeader));
} else {
// TODO(rvargas): Is it safe to change the protocol version?
headers->ReplaceStatusLine("HTTP/1.1 200 OK");
DCHECK_NE(resource_size_, 0);
headers->AddHeader(base::StringPrintf("%s: %" PRId64, kLengthHeader,
resource_size_));
}
}
void PartialData::FixContentLength(HttpResponseHeaders* headers) {
headers->RemoveHeader(kLengthHeader);
headers->AddHeader(base::StringPrintf("%s: %" PRId64, kLengthHeader,
resource_size_));
}
int PartialData::CacheRead(disk_cache::Entry* entry,
IOBuffer* data,
int data_len,
const CompletionCallback& callback) {
int read_len = std::min(data_len, cached_min_len_);
if (!read_len)
return 0;
int rv = 0;
if (sparse_entry_) {
rv = entry->ReadSparseData(current_range_start_, data, read_len,
callback);
} else {
if (current_range_start_ > kint32max)
return ERR_INVALID_ARGUMENT;
rv = entry->ReadData(kDataStream, static_cast<int>(current_range_start_),
data, read_len, callback);
}
return rv;
}
int PartialData::CacheWrite(disk_cache::Entry* entry,
IOBuffer* data,
int data_len,
const CompletionCallback& callback) {
DVLOG(3) << "To write: " << data_len;
if (sparse_entry_) {
return entry->WriteSparseData(
current_range_start_, data, data_len, callback);
} else {
if (current_range_start_ > kint32max)
return ERR_INVALID_ARGUMENT;
return entry->WriteData(kDataStream, static_cast<int>(current_range_start_),
data, data_len, callback, true);
}
}
void PartialData::OnCacheReadCompleted(int result) {
DVLOG(3) << "Read: " << result;
if (result > 0) {
current_range_start_ += result;
cached_min_len_ -= result;
DCHECK_GE(cached_min_len_, 0);
}
}
void PartialData::OnNetworkReadCompleted(int result) {
if (result > 0)
current_range_start_ += result;
}
int PartialData::GetNextRangeLen() {
int64 range_len =
byte_range_.HasLastBytePosition() ?
byte_range_.last_byte_position() - current_range_start_ + 1 :
kint32max;
if (range_len > kint32max)
range_len = kint32max;
return static_cast<int32>(range_len);
}
void PartialData::GetAvailableRangeCompleted(int result, int64 start) {
DCHECK(!callback_.is_null());
DCHECK_NE(ERR_IO_PENDING, result);
cached_start_ = start;
cached_min_len_ = result;
if (result >= 0)
result = 1; // Return success, go ahead and validate the entry.
CompletionCallback cb = callback_;
callback_.Reset();
cb.Run(result);
}
} // namespace net
|
Central to the QIBB approach has been the belief that it is better to offer support than to prescribe a particular set of activities. This allows training providers to work autonomously within a national, regional and institutional framework, which is needed because it sets down common standards and a common understanding of what constitutes quality within QIBB.
Whilst aiming for common principles, QIBB – by offering various strategic and operational tools to both institutions and individuals – thus leaves scope for autonomous decisions and activities, which are necessary if a true quality culture is to be built. |
If you are looking for a fun rear window graphic that will stand out and get you some attention the Up to No Good rear window graphic is just what you need. This is a stunning picture of a tree frog that has posed perfectly for the camera! The graphic captures this colorful creature in just the right way so that it looks like the frog is giving you a mischievous little grin. Whether you love frogs or just want a rear window graphic that will make people look smile then Up to No Good is just the rear window deal for your vehicle! |
Code&Care company is looking for a full stack developer with React + Node.js experience.
IT Svit is searching for a React Developer to work on new features of an innovative B2B online grocery and supplies delivery platform. This long-term project will provide ample opportunities to learn new coding techniques and grow as a professional. |
# coding=utf-8
# --------------------------------------------------------------------------
# Copyright (c) Microsoft Corporation. All rights reserved.
# Licensed under the MIT License. See License.txt in the project root for
# license information.
#
# Code generated by Microsoft (R) AutoRest Code Generator.
# Changes may cause incorrect behavior and will be lost if the code is
# regenerated.
# --------------------------------------------------------------------------
from msrest.serialization import Model
class GetObjectsParameters(Model):
"""Request parameters for the GetObjectsByObjectIds API.
:param additional_properties: Unmatched properties from the message are
deserialized this collection
:type additional_properties: dict[str, object]
:param object_ids: The requested object IDs.
:type object_ids: list[str]
:param types: The requested object types.
:type types: list[str]
:param include_directory_object_references: If true, also searches for
object IDs in the partner tenant.
:type include_directory_object_references: bool
"""
_validation = {
'include_directory_object_references': {'required': True},
}
_attribute_map = {
'additional_properties': {'key': '', 'type': '{object}'},
'object_ids': {'key': 'objectIds', 'type': '[str]'},
'types': {'key': 'types', 'type': '[str]'},
'include_directory_object_references': {'key': 'includeDirectoryObjectReferences', 'type': 'bool'},
}
def __init__(self, include_directory_object_references, additional_properties=None, object_ids=None, types=None):
super(GetObjectsParameters, self).__init__()
self.additional_properties = additional_properties
self.object_ids = object_ids
self.types = types
self.include_directory_object_references = include_directory_object_references
|
/*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The ASF licenses this file to You under the Apache License, Version 2.0
* (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package org.apache.activemq.artemis.core.remoting.impl.invm;
import java.util.Collections;
import java.util.HashMap;
import java.util.Map;
import java.util.concurrent.ConcurrentHashMap;
import java.util.concurrent.ConcurrentMap;
import java.util.concurrent.Executor;
import java.util.concurrent.ExecutorService;
import java.util.concurrent.SynchronousQueue;
import java.util.concurrent.ThreadPoolExecutor;
import java.util.concurrent.TimeUnit;
import org.apache.activemq.artemis.api.core.ActiveMQException;
import org.apache.activemq.artemis.api.core.client.ActiveMQClient;
import org.apache.activemq.artemis.core.server.ActiveMQComponent;
import org.apache.activemq.artemis.core.server.ActiveMQMessageBundle;
import org.apache.activemq.artemis.spi.core.remoting.AbstractConnector;
import org.apache.activemq.artemis.spi.core.remoting.Acceptor;
import org.apache.activemq.artemis.spi.core.remoting.BaseConnectionLifeCycleListener;
import org.apache.activemq.artemis.spi.core.remoting.BufferHandler;
import org.apache.activemq.artemis.spi.core.remoting.ClientConnectionLifeCycleListener;
import org.apache.activemq.artemis.spi.core.remoting.ClientProtocolManager;
import org.apache.activemq.artemis.spi.core.remoting.Connection;
import org.apache.activemq.artemis.spi.core.remoting.ConnectionLifeCycleListener;
import org.apache.activemq.artemis.utils.ActiveMQThreadFactory;
import org.apache.activemq.artemis.utils.ActiveMQThreadPoolExecutor;
import org.apache.activemq.artemis.utils.ConfigurationHelper;
import org.apache.activemq.artemis.utils.OrderedExecutorFactory;
import org.jboss.logging.Logger;
public class InVMConnector extends AbstractConnector {
private static final Logger logger = Logger.getLogger(InVMConnector.class);
public static final Map<String, Object> DEFAULT_CONFIG;
static {
Map<String, Object> config = new HashMap<>();
config.put(TransportConstants.SERVER_ID_PROP_NAME, TransportConstants.DEFAULT_SERVER_ID);
DEFAULT_CONFIG = Collections.unmodifiableMap(config);
}
// Used for testing failure only
public static volatile boolean failOnCreateConnection;
public static volatile int numberOfFailures = -1;
private static volatile int failures;
public static synchronized void resetFailures() {
InVMConnector.failures = 0;
InVMConnector.failOnCreateConnection = false;
InVMConnector.numberOfFailures = -1;
}
private static synchronized void incFailures() {
InVMConnector.failures++;
if (InVMConnector.failures == InVMConnector.numberOfFailures) {
InVMConnector.resetFailures();
}
}
protected final int id;
private final ClientProtocolManager protocolManager;
private final BufferHandler handler;
private final BaseConnectionLifeCycleListener listener;
private final InVMAcceptor acceptor;
private final ConcurrentMap<String, Connection> connections = new ConcurrentHashMap<>();
private volatile boolean started;
protected final OrderedExecutorFactory executorFactory;
private final Executor closeExecutor;
private static ExecutorService threadPoolExecutor;
public static synchronized void resetThreadPool() {
if (threadPoolExecutor != null) {
threadPoolExecutor.shutdown();
threadPoolExecutor = null;
}
}
private static synchronized ExecutorService getInVMExecutor() {
if (threadPoolExecutor == null) {
if (ActiveMQClient.getGlobalThreadPoolSize() <= -1) {
threadPoolExecutor = new ThreadPoolExecutor(0, Integer.MAX_VALUE, 60L, TimeUnit.SECONDS, new SynchronousQueue<Runnable>(), ActiveMQThreadFactory.defaultThreadFactory());
} else {
threadPoolExecutor = new ActiveMQThreadPoolExecutor(0, ActiveMQClient.getGlobalThreadPoolSize(), 60L, TimeUnit.SECONDS, ActiveMQThreadFactory.defaultThreadFactory());
}
}
return threadPoolExecutor;
}
public InVMConnector(final Map<String, Object> configuration,
final BufferHandler handler,
final ClientConnectionLifeCycleListener listener,
final Executor closeExecutor,
final Executor threadPool,
ClientProtocolManager protocolManager) {
super(configuration);
this.listener = listener;
id = ConfigurationHelper.getIntProperty(TransportConstants.SERVER_ID_PROP_NAME, 0, configuration);
this.handler = handler;
this.closeExecutor = closeExecutor;
executorFactory = new OrderedExecutorFactory(getInVMExecutor());
InVMRegistry registry = InVMRegistry.instance;
acceptor = registry.getAcceptor(id);
this.protocolManager = protocolManager;
}
public Acceptor getAcceptor() {
return acceptor;
}
@Override
public synchronized void close() {
if (!started) {
return;
}
for (Connection connection : connections.values()) {
listener.connectionDestroyed(connection.getID());
}
started = false;
}
@Override
public boolean isStarted() {
return started;
}
@Override
public Connection createConnection() {
if (InVMConnector.failOnCreateConnection) {
InVMConnector.incFailures();
logger.debug("Returning null on InVMConnector for tests");
// For testing only
return null;
}
if (acceptor == null) {
return null;
}
if (acceptor.getConnectionsAllowed() == -1 || acceptor.getConnectionCount() < acceptor.getConnectionsAllowed()) {
Connection conn = internalCreateConnection(acceptor.getHandler(), new Listener(), acceptor.getExecutorFactory().getExecutor());
acceptor.connect((String) conn.getID(), handler, this, executorFactory.getExecutor());
return conn;
} else {
if (logger.isDebugEnabled()) {
logger.debug(new StringBuilder().append("Connection limit of ").append(acceptor.getConnectionsAllowed()).append(" reached. Refusing connection."));
}
return null;
}
}
@Override
public synchronized void start() {
started = true;
}
public BufferHandler getHandler() {
return handler;
}
public void disconnect(final String connectionID) {
if (!started) {
return;
}
Connection conn = connections.get(connectionID);
if (conn != null) {
conn.close();
}
}
// This may be an injection point for mocks on tests
protected Connection internalCreateConnection(final BufferHandler handler,
final ClientConnectionLifeCycleListener listener,
final Executor serverExecutor) {
// No acceptor on a client connection
InVMConnection inVMConnection = new InVMConnection(id, handler, listener, serverExecutor);
listener.connectionCreated(null, inVMConnection, protocolManager);
return inVMConnection;
}
@Override
public boolean isEquivalent(Map<String, Object> configuration) {
int serverId = ConfigurationHelper.getIntProperty(TransportConstants.SERVER_ID_PROP_NAME, 0, configuration);
return id == serverId;
}
private class Listener implements ClientConnectionLifeCycleListener {
@Override
public void connectionCreated(final ActiveMQComponent component,
final Connection connection,
final ClientProtocolManager protocol) {
if (connections.putIfAbsent((String) connection.getID(), connection) != null) {
throw ActiveMQMessageBundle.BUNDLE.connectionExists(connection.getID());
}
if (listener instanceof ConnectionLifeCycleListener) {
listener.connectionCreated(component, connection, protocol.getName());
} else {
listener.connectionCreated(component, connection, protocol);
}
}
@Override
public void connectionDestroyed(final Object connectionID) {
if (connections.remove(connectionID) != null) {
// Close the corresponding connection on the other side
acceptor.disconnect((String) connectionID);
// Execute on different thread to avoid deadlocks
closeExecutor.execute(new Runnable() {
@Override
public void run() {
listener.connectionDestroyed(connectionID);
}
});
}
}
@Override
public void connectionException(final Object connectionID, final ActiveMQException me) {
// Execute on different thread to avoid deadlocks
closeExecutor.execute(new Runnable() {
@Override
public void run() {
listener.connectionException(connectionID, me);
}
});
}
@Override
public void connectionReadyForWrites(Object connectionID, boolean ready) {
}
}
}
|
BIRTH. Baptised 3 Nov 1834 at Mawgan in Meneage, the daughter of Samuel and Ann. Sources: IGI.
Comments. Daughter of Samuel 1802SM01 and Ann 1807AN02. Not seen in 1841, possibly died. |
<?php
// This file is part of Moodle - http://moodle.org/
//
// Moodle is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// Moodle is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with Moodle. If not, see <http://www.gnu.org/licenses/>.
/**
* select type form element
*
* Contains HTML class for a select type element
*
* @package core_form
* @copyright 2006 Jamie Pratt <[email protected]>
* @license http://www.gnu.org/copyleft/gpl.html GNU GPL v3 or later
*/
require_once('HTML/QuickForm/select.php');
require_once('templatable_form_element.php');
/**
* select type form element
*
* HTML class for a select type element
*
* @package core_form
* @category form
* @copyright 2006 Jamie Pratt <[email protected]>
* @license http://www.gnu.org/copyleft/gpl.html GNU GPL v3 or later
*/
class MoodleQuickForm_select extends HTML_QuickForm_select implements templatable {
use templatable_form_element {
export_for_template as export_for_template_base;
}
/** @var string html for help button, if empty then no help */
var $_helpbutton='';
/** @var bool if true label will be hidden */
var $_hiddenLabel=false;
/**
* constructor
*
* @param string $elementName Select name attribute
* @param mixed $elementLabel Label(s) for the select
* @param mixed $options Data to be used to populate options
* @param mixed $attributes Either a typical HTML attribute string or an associative array
*/
public function __construct($elementName=null, $elementLabel=null, $options=null, $attributes=null) {
parent::__construct($elementName, $elementLabel, $options, $attributes);
}
/**
* Old syntax of class constructor. Deprecated in PHP7.
*
* @deprecated since Moodle 3.1
*/
public function MoodleQuickForm_select($elementName=null, $elementLabel=null, $options=null, $attributes=null) {
debugging('Use of class name as constructor is deprecated', DEBUG_DEVELOPER);
self::__construct($elementName, $elementLabel, $options, $attributes);
}
/**
* Sets label to be hidden
*
* @param bool $hiddenLabel sets if label should be hidden
*/
function setHiddenLabel($hiddenLabel){
$this->_hiddenLabel = $hiddenLabel;
}
/**
* Returns HTML for select form element.
*
* @return string
*/
function toHtml(){
$html = '';
if ($this->getMultiple()) {
// Adding an hidden field forces the browser to send an empty data even though the user did not
// select any element. This value will be cleaned up in self::exportValue() as it will not be part
// of the select options.
$html .= '<input type="hidden" name="'.$this->getName().'" value="_qf__force_multiselect_submission">';
}
if ($this->_hiddenLabel){
$this->_generateId();
$html .= '<label class="accesshide" for="'.$this->getAttribute('id').'" >'.$this->getLabel().'</label>';
}
$html .= parent::toHtml();
return $html;
}
/**
* get html for help button
*
* @return string html for help button
*/
function getHelpButton(){
return $this->_helpbutton;
}
/**
* Removes an OPTION from the SELECT
*
* @param string $value Value for the OPTION to remove
* @return void
*/
function removeOption($value)
{
$key=array_search($value, $this->_values);
if ($key!==FALSE and $key!==null) {
unset($this->_values[$key]);
}
foreach ($this->_options as $key=>$option){
if ($option['attr']['value']==$value){
unset($this->_options[$key]);
// we must reindex the options because the ugly code in quickforms' select.php expects that keys are 0,1,2,3... !?!?
$this->_options = array_merge($this->_options);
return;
}
}
}
/**
* Removes all OPTIONs from the SELECT
*/
function removeOptions()
{
$this->_options = array();
}
/**
* Slightly different container template when frozen. Don't want to use a label tag
* with a for attribute in that case for the element label but instead use a div.
* Templates are defined in renderer constructor.
*
* @return string
*/
function getElementTemplateType(){
if ($this->_flagFrozen){
return 'static';
} else {
return 'default';
}
}
/**
* We check the options and return only the values that _could_ have been
* selected. We also return a scalar value if select is not "multiple"
*
* @param array $submitValues submitted values
* @param bool $assoc if true the retured value is associated array
* @return mixed
*/
function exportValue(&$submitValues, $assoc = false)
{
if (empty($this->_options)) {
return $this->_prepareValue(null, $assoc);
}
$value = $this->_findValue($submitValues);
if (is_null($value)) {
$value = $this->getValue();
}
$value = (array)$value;
$cleaned = array();
foreach ($value as $v) {
foreach ($this->_options as $option) {
if ((string)$option['attr']['value'] === (string)$v) {
$cleaned[] = (string)$option['attr']['value'];
break;
}
}
}
if (empty($cleaned)) {
return $this->_prepareValue(null, $assoc);
}
if ($this->getMultiple()) {
return $this->_prepareValue($cleaned, $assoc);
} else {
return $this->_prepareValue($cleaned[0], $assoc);
}
}
public function export_for_template(renderer_base $output) {
$context = $this->export_for_template_base($output);
$options = [];
foreach ($this->_options as $option) {
if (is_array($this->_values) && in_array( (string) $option['attr']['value'], $this->_values)) {
$this->_updateAttrArray($option['attr'], ['selected' => 'selected']);
}
$o = [
'text' => $option['text'],
'value' => $option['attr']['value'],
'selected' => !empty($option['attr']['selected'])
];
$options[] = $o;
}
$context['options'] = $options;
if ($this->getAttribute('multiple')) {
$context['name'] = $context['name'] . '[]';
}
return $context;
}
}
|
Our new campaign for Flava-it has been causing a stir amongst consumers and marketing media alike this week.
We decided a controversial approach coupled with strong creative would help the Flava-it brand of seasoning and marinade sachets really stand out from its competitors and reach a new, younger target audience.
And so we created Meat Lust - "that amazing moment when a seriously succulent and joyously tender mouthful of meat hits your tastebuds". Our creatives then brought the concept to life with fantastic creative and sharable elements.
Visitors to the campaign website, which is being promoted through social channels, are invited to 'Unleash Your Meat Lust' with a fun video (see below) and to take part in a quiz to "find out if you have meat lust". All elements encourage social sharing and consumers can also get a free sample via the site or find local stockists by simply entering their postcode.
As the lead creative agency, we handled the project from concept through to creative and site build, partnering with London based Agile for the video and Manchester based photographer Geoff Rhodes.
The campaign's tongue in cheek approach may not appeal to everyone -- but we're confident that it will be memorable and encourage time poor 18-35 year olds to give it a try. It's fun and a bit cheeky, and bang on the money for who we're trying to appeal to.
Check it out at www.meatlust.com. |
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/xhtml;charset=UTF-8"/>
<meta http-equiv="X-UA-Compatible" content="IE=9"/>
<meta name="generator" content="Doxygen 1.8.11"/>
<title>Raleigh Triangle Index: LocalPageSubscriptionExample Class Reference</title>
<link href="../../tabs.css" rel="stylesheet" type="text/css"/>
<script type="text/javascript" src="../../jquery.js"></script>
<script type="text/javascript" src="../../dynsections.js"></script>
<link href="../../navtree.css" rel="stylesheet" type="text/css"/>
<script type="text/javascript" src="../../resize.js"></script>
<script type="text/javascript" src="../../navtreedata.js"></script>
<script type="text/javascript" src="../../navtree.js"></script>
<script type="text/javascript">
$(document).ready(initResizable);
$(window).load(resizeHeight);
</script>
<link href="../../search/search.css" rel="stylesheet" type="text/css"/>
<script type="text/javascript" src="../../search/searchdata.js"></script>
<script type="text/javascript" src="../../search/search.js"></script>
<script type="text/javascript">
$(document).ready(function() { init_search(); });
</script>
<link href="../../doxygen.css" rel="stylesheet" type="text/css" />
</head>
<body>
<div id="top"><!-- do not remove this div, it is closed by doxygen! -->
<div id="titlearea">
<table cellspacing="0" cellpadding="0">
<tbody>
<tr style="height: 56px;">
<td id="projectlogo"><img alt="Logo" src="../../RTRindex.jpg"/></td>
<td id="projectalign" style="padding-left: 0.5em;">
<div id="projectname">Raleigh Triangle Index
 <span id="projectnumber">1.0.0</span>
</div>
<div id="projectbrief">In the financial market an index is a theoretical portfolio of stocks that represents a certainmarket.Itisusedinvarietywaystogiveinvestorsmoreinvestmentoptions</div>
</td>
</tr>
</tbody>
</table>
</div>
<!-- end header part -->
<!-- Generated by Doxygen 1.8.11 -->
<script type="text/javascript">
var searchBox = new SearchBox("searchBox", "../../search",false,'Search');
</script>
<div id="navrow1" class="tabs">
<ul class="tablist">
<li><a href="../../index.html"><span>Main Page</span></a></li>
<li class="current"><a href="../../annotated.html"><span>Classes</span></a></li>
<li><a href="../../files.html"><span>Files</span></a></li>
<li>
<div id="MSearchBox" class="MSearchBoxInactive">
<span class="left">
<img id="MSearchSelect" src="../../search/mag_sel.png"
onmouseover="return searchBox.OnSearchSelectShow()"
onmouseout="return searchBox.OnSearchSelectHide()"
alt=""/>
<input type="text" id="MSearchField" value="Search" accesskey="S"
onfocus="searchBox.OnSearchFieldFocus(true)"
onblur="searchBox.OnSearchFieldFocus(false)"
onkeyup="searchBox.OnSearchFieldChange(event)"/>
</span><span class="right">
<a id="MSearchClose" href="javascript:searchBox.CloseResultsWindow()"><img id="MSearchCloseImg" border="0" src="../../search/close.png" alt=""/></a>
</span>
</div>
</li>
</ul>
</div>
<div id="navrow2" class="tabs2">
<ul class="tablist">
<li><a href="../../annotated.html"><span>Class List</span></a></li>
<li><a href="../../classes.html"><span>Class Index</span></a></li>
<li><a href="../../hierarchy.html"><span>Class Hierarchy</span></a></li>
</ul>
</div>
</div><!-- top -->
<div id="side-nav" class="ui-resizable side-nav-resizable">
<div id="nav-tree">
<div id="nav-tree-contents">
<div id="nav-sync" class="sync"></div>
</div>
</div>
<div id="splitbar" style="-moz-user-select:none;"
class="ui-resizable-handle">
</div>
</div>
<script type="text/javascript">
$(document).ready(function(){initNavTree('d0/dc7/class_local_page_subscription_example.html','../../');});
</script>
<div id="doc-content">
<!-- window showing the filter options -->
<div id="MSearchSelectWindow"
onmouseover="return searchBox.OnSearchSelectShow()"
onmouseout="return searchBox.OnSearchSelectHide()"
onkeydown="return searchBox.OnSearchSelectKey(event)">
</div>
<!-- iframe showing the search results (closed by default) -->
<div id="MSearchResultsWindow">
<iframe src="javascript:void(0)" frameborder="0"
name="MSearchResults" id="MSearchResults">
</iframe>
</div>
<div class="header">
<div class="summary">
<a href="#pub-methods">Public Member Functions</a> |
<a href="../../d7/d41/class_local_page_subscription_example-members.html">List of all members</a> </div>
<div class="headertitle">
<div class="title">LocalPageSubscriptionExample Class Reference</div> </div>
</div><!--header-->
<div class="contents">
<table class="memberdecls">
<tr class="heading"><td colspan="2"><h2 class="groupheader"><a name="pub-methods"></a>
Public Member Functions</h2></td></tr>
<tr class="memitem:a6b1b4eed6008e042bc9cb8c75b187270"><td class="memItemLeft" align="right" valign="top"><a class="anchor" id="a6b1b4eed6008e042bc9cb8c75b187270"></a>
bool </td><td class="memItemRight" valign="bottom"><b>authorize</b> (const Service &authService, Identity *subscriptionIdentity, Session *session, const CorrelationId &cid)</td></tr>
<tr class="separator:a6b1b4eed6008e042bc9cb8c75b187270"><td class="memSeparator" colspan="2"> </td></tr>
<tr class="memitem:a904d7e4202997585911ce5bf700702fe"><td class="memItemLeft" align="right" valign="top"><a class="anchor" id="a904d7e4202997585911ce5bf700702fe"></a>
void </td><td class="memItemRight" valign="bottom"><b>run</b> (int argc, char **argv)</td></tr>
<tr class="separator:a904d7e4202997585911ce5bf700702fe"><td class="memSeparator" colspan="2"> </td></tr>
</table>
<a name="details" id="details"></a><h2 class="groupheader">Detailed Description</h2>
<div class="textblock"></div><hr/>The documentation for this class was generated from the following file:<ul>
<li>raleigh-triangle-index/examples/<a class="el" href="../../">LocalPageSubscriptionExample.cpp</a></li>
</ul>
</div><!-- contents -->
</div><!-- doc-content -->
<!-- start footer part -->
<div id="nav-path" class="navpath"><!-- id is needed for treeview function! -->
<ul>
<li class="navelem"><a class="el" href="../../d0/dc7/class_local_page_subscription_example.html">LocalPageSubscriptionExample</a></li>
<li class="footer">Generated by
<a href="http://www.doxygen.org/index.html">
<img class="footer" src="../../doxygen.png" alt="doxygen"/></a> 1.8.11 </li>
</ul>
</div>
</body>
</html>
|
#!/usr/bin/perl
# This file is part of Koha.
#
# Koha is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# Koha is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with Koha; if not, see <http://www.gnu.org/licenses>.
use Modern::Perl;
use CGI qw ( -utf8 );
use Digest::MD5 qw( md5_base64 md5_hex );
use JSON;
use List::MoreUtils qw( any each_array uniq );
use String::Random qw( random_string );
use C4::Auth;
use C4::Output;
use C4::Members;
use C4::Members::Attributes qw( GetBorrowerAttributes );
use C4::Form::MessagingPreferences;
use Koha::AuthUtils;
use Koha::Patrons;
use Koha::Patron::Consent;
use Koha::Patron::Modification;
use Koha::Patron::Modifications;
use C4::Scrubber;
use Email::Valid;
use Koha::DateUtils;
use Koha::Libraries;
use Koha::Patron::Attribute::Types;
use Koha::Patron::Attributes;
use Koha::Patron::Images;
use Koha::Patron::Modification;
use Koha::Patron::Modifications;
use Koha::Patrons;
use Koha::Token;
my $cgi = new CGI;
my $dbh = C4::Context->dbh;
my ( $template, $borrowernumber, $cookie ) = get_template_and_user(
{
template_name => "opac-memberentry.tt",
type => "opac",
query => $cgi,
authnotrequired => 1,
}
);
unless ( C4::Context->preference('PatronSelfRegistration') || $borrowernumber )
{
print $cgi->redirect("/cgi-bin/koha/opac-main.pl");
exit;
}
my $action = $cgi->param('action') || q{};
if ( $action eq q{} ) {
if ($borrowernumber) {
$action = 'edit';
}
else {
$action = 'new';
}
}
my $mandatory = GetMandatoryFields($action);
my @libraries = Koha::Libraries->search;
if ( my @libraries_to_display = split '\|', C4::Context->preference('PatronSelfRegistrationLibraryList') ) {
@libraries = map { my $b = $_; my $branchcode = $_->branchcode; grep( /^$branchcode$/, @libraries_to_display ) ? $b : () } @libraries;
}
my ( $min, $max ) = C4::Members::get_cardnumber_length();
if ( defined $min ) {
$template->param(
minlength_cardnumber => $min,
maxlength_cardnumber => $max
);
}
$template->param(
action => $action,
hidden => GetHiddenFields( $mandatory, $action ),
mandatory => $mandatory,
libraries => \@libraries,
OPACPatronDetails => C4::Context->preference('OPACPatronDetails'),
);
my $attributes = ParsePatronAttributes($borrowernumber,$cgi);
my $conflicting_attribute = 0;
foreach my $attr (@$attributes) {
unless ( C4::Members::Attributes::CheckUniqueness($attr->{code}, $attr->{value}, $borrowernumber) ) {
my $attr_info = C4::Members::AttributeTypes->fetch($attr->{code});
$template->param(
extended_unique_id_failed_code => $attr->{code},
extended_unique_id_failed_value => $attr->{value},
extended_unique_id_failed_description => $attr_info->description()
);
$conflicting_attribute = 1;
}
}
if ( $action eq 'create' ) {
my %borrower = ParseCgiForBorrower($cgi);
%borrower = DelEmptyFields(%borrower);
my @empty_mandatory_fields = CheckMandatoryFields( \%borrower, $action );
my $invalidformfields = CheckForInvalidFields(\%borrower);
delete $borrower{'password2'};
my $cardnumber_error_code;
if ( !grep { $_ eq 'cardnumber' } @empty_mandatory_fields ) {
# No point in checking the cardnumber if it's missing and mandatory, it'll just generate a
# spurious length warning.
$cardnumber_error_code = checkcardnumber( $borrower{cardnumber}, $borrower{borrowernumber} );
}
if ( @empty_mandatory_fields || @$invalidformfields || $cardnumber_error_code || $conflicting_attribute ) {
if ( $cardnumber_error_code == 1 ) {
$template->param( cardnumber_already_exists => 1 );
} elsif ( $cardnumber_error_code == 2 ) {
$template->param( cardnumber_wrong_length => 1 );
}
$template->param(
empty_mandatory_fields => \@empty_mandatory_fields,
invalid_form_fields => $invalidformfields,
borrower => \%borrower
);
$template->param( patron_attribute_classes => GeneratePatronAttributesForm( undef, $attributes ) );
}
elsif (
md5_base64( uc( $cgi->param('captcha') ) ) ne $cgi->param('captcha_digest') )
{
$template->param(
failed_captcha => 1,
borrower => \%borrower
);
$template->param( patron_attribute_classes => GeneratePatronAttributesForm( undef, $attributes ) );
}
else {
if (
C4::Context->boolean_preference(
'PatronSelfRegistrationVerifyByEmail')
)
{
( $template, $borrowernumber, $cookie ) = get_template_and_user(
{
template_name => "opac-registration-email-sent.tt",
type => "opac",
query => $cgi,
authnotrequired => 1,
}
);
$template->param( 'email' => $borrower{'email'} );
my $verification_token = md5_hex( time().{}.rand().{}.$$ );
while ( Koha::Patron::Modifications->search( { verification_token => $verification_token } )->count() ) {
$verification_token = md5_hex( time().{}.rand().{}.$$ );
}
$borrower{password} = Koha::AuthUtils::generate_password unless $borrower{password};
$borrower{verification_token} = $verification_token;
Koha::Patron::Modification->new( \%borrower )->store();
#Send verification email
my $letter = C4::Letters::GetPreparedLetter(
module => 'members',
letter_code => 'OPAC_REG_VERIFY',
lang => 'default', # Patron does not have a preferred language defined yet
tables => {
borrower_modifications => $verification_token,
},
);
C4::Letters::EnqueueLetter(
{
letter => $letter,
message_transport_type => 'email',
to_address => $borrower{'email'},
from_address =>
C4::Context->preference('KohaAdminEmailAddress'),
}
);
my $num_letters_attempted = C4::Letters::SendQueuedMessages( {
letter_code => 'OPAC_REG_VERIFY'
} );
}
else {
( $template, $borrowernumber, $cookie ) = get_template_and_user(
{
template_name => "opac-registration-confirmation.tt",
type => "opac",
query => $cgi,
authnotrequired => 1,
}
);
$borrower{categorycode} ||= C4::Context->preference('PatronSelfRegistrationDefaultCategory');
$borrower{password} ||= Koha::AuthUtils::generate_password;
my $consent_dt = delete $borrower{gdpr_proc_consent};
my $patron = Koha::Patron->new( \%borrower )->store;
Koha::Patron::Consent->new({ borrowernumber => $patron->borrowernumber, type => 'GDPR_PROCESSING', given_on => $consent_dt })->store if $consent_dt;
if ( $patron ) {
C4::Members::Attributes::SetBorrowerAttributes( $patron->borrowernumber, $attributes );
if ( C4::Context->preference('EnhancedMessagingPreferences') ) {
C4::Form::MessagingPreferences::handle_form_action(
$cgi,
{ borrowernumber => $patron->borrowernumber },
$template,
1,
C4::Context->preference('PatronSelfRegistrationDefaultCategory')
);
}
$template->param( password_cleartext => $patron->plain_text_password );
$template->param( borrower => $patron->unblessed );
} else {
# FIXME Handle possible errors here
}
$template->param(
PatronSelfRegistrationAdditionalInstructions =>
C4::Context->preference(
'PatronSelfRegistrationAdditionalInstructions')
);
}
}
}
elsif ( $action eq 'update' ) {
my $borrower = Koha::Patrons->find( $borrowernumber )->unblessed;
die "Wrong CSRF token"
unless Koha::Token->new->check_csrf({
session_id => scalar $cgi->cookie('CGISESSID'),
token => scalar $cgi->param('csrf_token'),
});
my %borrower = ParseCgiForBorrower($cgi);
$borrower{borrowernumber} = $borrowernumber;
my @empty_mandatory_fields =
CheckMandatoryFields( \%borrower, $action );
my $invalidformfields = CheckForInvalidFields(\%borrower);
# Send back the data to the template
%borrower = ( %$borrower, %borrower );
if (@empty_mandatory_fields || @$invalidformfields) {
$template->param(
empty_mandatory_fields => \@empty_mandatory_fields,
invalid_form_fields => $invalidformfields,
borrower => \%borrower,
csrf_token => Koha::Token->new->generate_csrf({
session_id => scalar $cgi->cookie('CGISESSID'),
}),
);
$template->param( patron_attribute_classes => GeneratePatronAttributesForm( $borrowernumber, $attributes ) );
$template->param( action => 'edit' );
}
else {
my %borrower_changes = DelUnchangedFields( $borrowernumber, %borrower );
$borrower_changes{'changed_fields'} = join ',', keys %borrower_changes;
my $extended_attributes_changes = FilterUnchangedAttributes( $borrowernumber, $attributes );
if ( %borrower_changes || scalar @{$extended_attributes_changes} > 0 ) {
( $template, $borrowernumber, $cookie ) = get_template_and_user(
{
template_name => "opac-memberentry-update-submitted.tt",
type => "opac",
query => $cgi,
authnotrequired => 1,
}
);
$borrower_changes{borrowernumber} = $borrowernumber;
$borrower_changes{extended_attributes} = to_json($extended_attributes_changes);
Koha::Patron::Modifications->search({ borrowernumber => $borrowernumber })->delete;
my $m = Koha::Patron::Modification->new( \%borrower_changes )->store();
my $patron = Koha::Patrons->find( $borrowernumber );
$template->param( borrower => $patron->unblessed );
}
else {
my $patron = Koha::Patrons->find( $borrowernumber );
$template->param(
action => 'edit',
nochanges => 1,
borrower => $patron->unblessed,
patron_attribute_classes => GeneratePatronAttributesForm( $borrowernumber, $attributes ),
csrf_token => Koha::Token->new->generate_csrf({
session_id => scalar $cgi->cookie('CGISESSID'),
}),
);
}
}
}
elsif ( $action eq 'edit' ) { #Display logged in borrower's data
my $patron = Koha::Patrons->find( $borrowernumber );
my $borrower = $patron->unblessed;
$template->param(
borrower => $borrower,
hidden => GetHiddenFields( $mandatory, 'edit' ),
csrf_token => Koha::Token->new->generate_csrf({
session_id => scalar $cgi->cookie('CGISESSID'),
}),
);
if (C4::Context->preference('OPACpatronimages')) {
$template->param( display_patron_image => 1 ) if $patron->image;
}
$template->param( patron_attribute_classes => GeneratePatronAttributesForm( $borrowernumber ) );
} else {
# Render self-registration page
$template->param( patron_attribute_classes => GeneratePatronAttributesForm() );
}
my $captcha = random_string("CCCCC");
my $patron_param = Koha::Patrons->find( $borrowernumber );
$template->param(
has_guarantor_flag => $patron_param->guarantor_relationships->guarantors->_resultset->count
) if $patron_param;
$template->param(
captcha => $captcha,
captcha_digest => md5_base64($captcha),
patron => $patron_param
);
output_html_with_http_headers $cgi, $cookie, $template->output, undef, { force_no_caching => 1 };
sub GetHiddenFields {
my ( $mandatory, $action ) = @_;
my %hidden_fields;
my $BorrowerUnwantedField = $action eq 'edit' || $action eq 'update' ?
C4::Context->preference( "PatronSelfModificationBorrowerUnwantedField" ) :
C4::Context->preference( "PatronSelfRegistrationBorrowerUnwantedField" );
my @fields = split( /\|/, $BorrowerUnwantedField || q|| );
foreach (@fields) {
next unless m/\w/o;
#Don't hide mandatory fields
next if $mandatory->{$_};
$hidden_fields{$_} = 1;
}
return \%hidden_fields;
}
sub GetMandatoryFields {
my ($action) = @_;
my %mandatory_fields;
my $BorrowerMandatoryField =
C4::Context->preference("PatronSelfRegistrationBorrowerMandatoryField");
my @fields = split( /\|/, $BorrowerMandatoryField );
push @fields, 'gdpr_proc_consent' if C4::Context->preference('GDPR_Policy') && $action eq 'create';
foreach (@fields) {
$mandatory_fields{$_} = 1;
}
if ( $action eq 'create' || $action eq 'new' ) {
$mandatory_fields{'email'} = 1
if C4::Context->boolean_preference(
'PatronSelfRegistrationVerifyByEmail');
}
return \%mandatory_fields;
}
sub CheckMandatoryFields {
my ( $borrower, $action ) = @_;
my @empty_mandatory_fields;
my $mandatory_fields = GetMandatoryFields($action);
delete $mandatory_fields->{'cardnumber'};
foreach my $key ( keys %$mandatory_fields ) {
push( @empty_mandatory_fields, $key )
unless ( defined( $borrower->{$key} ) && $borrower->{$key} );
}
return @empty_mandatory_fields;
}
sub CheckForInvalidFields {
my $borrower = shift;
my @invalidFields;
if ($borrower->{'email'}) {
unless ( Email::Valid->address($borrower->{'email'}) ) {
push(@invalidFields, "email");
} elsif ( C4::Context->preference("PatronSelfRegistrationEmailMustBeUnique") ) {
my $patrons_with_same_email = Koha::Patrons->search( # FIXME Should be search_limited?
{
email => $borrower->{email},
(
exists $borrower->{borrowernumber}
? ( borrowernumber =>
{ '!=' => $borrower->{borrowernumber} } )
: ()
)
}
)->count;
if ( $patrons_with_same_email ) {
push @invalidFields, "duplicate_email";
}
}
}
if ($borrower->{'emailpro'}) {
push(@invalidFields, "emailpro") if (!Email::Valid->address($borrower->{'emailpro'}));
}
if ($borrower->{'B_email'}) {
push(@invalidFields, "B_email") if (!Email::Valid->address($borrower->{'B_email'}));
}
if ( defined $borrower->{'password'}
and $borrower->{'password'} ne $borrower->{'password2'} )
{
push( @invalidFields, "password_match" );
}
if ( $borrower->{'password'} ) {
my ( $is_valid, $error ) = Koha::AuthUtils::is_password_valid( $borrower->{password} );
unless ( $is_valid ) {
push @invalidFields, 'password_too_short' if $error eq 'too_short';
push @invalidFields, 'password_too_weak' if $error eq 'too_weak';
push @invalidFields, 'password_has_whitespaces' if $error eq 'has_whitespaces';
}
}
return \@invalidFields;
}
sub ParseCgiForBorrower {
my ($cgi) = @_;
my $scrubber = C4::Scrubber->new();
my %borrower;
foreach my $field ( $cgi->param ) {
if ( $field =~ '^borrower_' ) {
my ($key) = substr( $field, 9 );
if ( $field !~ '^borrower_password' ) {
$borrower{$key} = $scrubber->scrub( scalar $cgi->param($field) );
} else {
# Allow html characters for passwords
$borrower{$key} = $cgi->param($field);
}
}
}
if ( defined $borrower{'dateofbirth'} ) {
my $dob_dt;
$dob_dt = eval { dt_from_string( $borrower{'dateofbirth'} ); }
if ( $borrower{'dateofbirth'} );
if ( $dob_dt ) {
$borrower{'dateofbirth'} = output_pref( { dt => $dob_dt, dateonly => 1, dateformat => 'iso' } );
}
else {
# Trigger validation
$borrower{'dateofbirth'} = undef;
}
}
# Replace checkbox 'agreed' by datetime in gdpr_proc_consent
$borrower{gdpr_proc_consent} = dt_from_string if $borrower{gdpr_proc_consent} && $borrower{gdpr_proc_consent} eq 'agreed';
return %borrower;
}
sub DelUnchangedFields {
my ( $borrowernumber, %new_data ) = @_;
# get the mandatory fields so we can get the hidden fields
my $mandatory = GetMandatoryFields('edit');
my $patron = Koha::Patrons->find( $borrowernumber );
my $current_data = $patron->unblessed;
# get the hidden fields so we don't obliterate them should they have data patrons aren't allowed to modify
my $hidden_fields = GetHiddenFields($mandatory, 'edit');
foreach my $key ( keys %new_data ) {
next if defined($new_data{$key}) xor defined($current_data->{$key});
if ( !defined($new_data{$key}) || $current_data->{$key} eq $new_data{$key} || $hidden_fields->{$key} ) {
delete $new_data{$key};
}
}
return %new_data;
}
sub DelEmptyFields {
my (%borrower) = @_;
foreach my $key ( keys %borrower ) {
delete $borrower{$key} unless $borrower{$key};
}
return %borrower;
}
sub FilterUnchangedAttributes {
my ( $borrowernumber, $entered_attributes ) = @_;
my @patron_attributes = grep {$_->opac_editable} Koha::Patron::Attributes->search({ borrowernumber => $borrowernumber })->as_list;
my $patron_attribute_types;
foreach my $attr (@patron_attributes) {
$patron_attribute_types->{ $attr->code } += 1;
}
my $passed_attribute_types;
foreach my $attr (@{ $entered_attributes }) {
$passed_attribute_types->{ $attr->{ code } } += 1;
}
my @changed_attributes;
# Loop through the current patron attributes
foreach my $attribute_type ( keys %{ $patron_attribute_types } ) {
if ( $patron_attribute_types->{ $attribute_type } != $passed_attribute_types->{ $attribute_type } ) {
# count differs, overwrite all attributes for given type
foreach my $attr (@{ $entered_attributes }) {
push @changed_attributes, $attr
if $attr->{ code } eq $attribute_type;
}
} else {
# count matches, check values
my $changes = 0;
foreach my $attr (grep { $_->code eq $attribute_type } @patron_attributes) {
$changes = 1
unless any { $_->{ value } eq $attr->attribute } @{ $entered_attributes };
last if $changes;
}
if ( $changes ) {
foreach my $attr (@{ $entered_attributes }) {
push @changed_attributes, $attr
if $attr->{ code } eq $attribute_type;
}
}
}
}
# Loop through passed attributes, looking for new ones
foreach my $attribute_type ( keys %{ $passed_attribute_types } ) {
if ( !defined $patron_attribute_types->{ $attribute_type } ) {
# YAY, new stuff
foreach my $attr (grep { $_->{code} eq $attribute_type } @{ $entered_attributes }) {
push @changed_attributes, $attr;
}
}
}
return \@changed_attributes;
}
sub GeneratePatronAttributesForm {
my ( $borrowernumber, $entered_attributes ) = @_;
# Get all attribute types and the values for this patron (if applicable)
my @types = grep { $_->opac_editable() or $_->opac_display }
Koha::Patron::Attribute::Types->search()->as_list();
if ( scalar(@types) == 0 ) {
return [];
}
my @displayable_attributes = grep { $_->opac_display }
Koha::Patron::Attributes->search({ borrowernumber => $borrowernumber })->as_list;
my %attr_values = ();
# Build the attribute values list either from the passed values
# or taken from the patron itself
if ( defined $entered_attributes ) {
foreach my $attr (@$entered_attributes) {
push @{ $attr_values{ $attr->{code} } }, $attr->{value};
}
}
elsif ( defined $borrowernumber ) {
my @editable_attributes = grep { $_->opac_editable } @displayable_attributes;
foreach my $attr (@editable_attributes) {
push @{ $attr_values{ $attr->code } }, $attr->attribute;
}
}
# Add the non-editable attributes (that don't come from the form)
foreach my $attr ( grep { !$_->opac_editable } @displayable_attributes ) {
push @{ $attr_values{ $attr->code } }, $attr->attribute;
}
# Find all existing classes
my @classes = sort( uniq( map { $_->class } @types ) );
my %items_by_class;
foreach my $attr_type (@types) {
push @{ $items_by_class{ $attr_type->class() } }, {
type => $attr_type,
# If editable, make sure there's at least one empty entry,
# to make the template's job easier
values => $attr_values{ $attr_type->code() } || ['']
}
unless !defined $attr_values{ $attr_type->code() }
and !$attr_type->opac_editable;
}
# Finally, build a list of containing classes
my @class_loop;
foreach my $class (@classes) {
next unless ( $items_by_class{$class} );
my $av = Koha::AuthorisedValues->search(
{ category => 'PA_CLASS', authorised_value => $class } );
my $lib = $av->count ? $av->next->opac_description : $class;
push @class_loop,
{
class => $class,
items => $items_by_class{$class},
lib => $lib,
};
}
return \@class_loop;
}
sub ParsePatronAttributes {
my ( $borrowernumber, $cgi ) = @_;
my @codes = $cgi->multi_param('patron_attribute_code');
my @values = $cgi->multi_param('patron_attribute_value');
my @editable_attribute_types
= map { $_->code } Koha::Patron::Attribute::Types->search({ opac_editable => 1 });
my $ea = each_array( @codes, @values );
my @attributes;
my $delete_candidates = {};
while ( my ( $code, $value ) = $ea->() ) {
if ( any { $_ eq $code } @editable_attribute_types ) {
# It is an editable attribute
if ( !defined($value) or $value eq '' ) {
$delete_candidates->{$code} = 1
unless $delete_candidates->{$code};
}
else {
# we've got a value
push @attributes, { code => $code, value => $value };
# 'code' is no longer a delete candidate
delete $delete_candidates->{$code}
if defined $delete_candidates->{$code};
}
}
}
foreach my $code ( keys %{$delete_candidates} ) {
if ( Koha::Patron::Attributes->search({
borrowernumber => $borrowernumber, code => $code })->count > 0 )
{
push @attributes, { code => $code, value => '' }
unless any { $_->{code} eq $code } @attributes;
}
}
return \@attributes;
}
1;
|
# PHP IMDB Grabber
[](https://travis-ci.org/kingio/PHP-IMDB-Grabber)
This PHP library enables you to scrap data from IMDB.com and it's heavily based on
[FabianBeiner's PHP-IMDB-Grabber](https://github.com/FabianBeiner/PHP-IMDB-Grabber)
(You can also find more info about this package, its license and conditions of usage there).
It's begin used on production servers.
# Install
`composer require kingio/php-imdb-grabber`
# Usage
```php
<?php
require './vendor/autoload.php';
$imdbId = "https://www.imdb.com/title/tt0241527/";
$imdb = new \IMDB\IMDB($imdbId);
print_r($imdb->getTitle());
```
# Testing
See on [Travis CI](https://travis-ci.org/kingio/PHP-IMDB-Grabber)
Or:
```bash
composer update
./vendor/bin/phpunit test/DataTest.php
```
# Changelog
https://github.com/kingio/PHP-IMDB-Grabber/releases
# License
MIT
|
Once you’ve decided to make Oak Bank your new banking home, let us take it from there. We make switching banks easy for you! Simply contact a Personal Banking Specialist and we will help walk you through the process.
1) Open your new account with Oak Bank – Fill out a New Account Application Form and include photocopies of your driver’s license or other form of ID so that we may accurately identify you and any joint account holder.
Email: Save the completed New Account Application Form and send it to us using Secure File Transfer.
2) Update direct deposits – Fill out a Direct Deposit Update Form for each direct deposit you have set up and submit a copy to the paying party, keeping a copy for your files.
3) Update automatic payments – Fill out an Automatic Payment Update Form and submit a copy to each payee, keeping a copy for your files.
4) Close your old bank account(s) – Bring an Account Closing Form to your old bank to close your account. Keep a copy of the form for your records and any other documentation pertaining to your account closing. |
St John's Road runs from the top of Grosvenor Road towards Southborough and Tonbridge. Here is the church, after which the road is named, looking from the north. It is number 6655 by an unknown publisher.
The next card is No.119 in the Wells Series published by Harold H Camburn, Tunbridge Wells and is of a similar view. The pleached hedge has grown significantly since the picture above was taken.
Here is a view of the interior taken by Louis Levy in the early 20th century, number 3 in the series. Nowadays the pews have been removed to make the space more flexible.
In the view below, the church,is visible in the distance. Today this prospect would be unrecognisable, with the church being the only constant, and the erection of a new parish hall in front of the south elevation would hide much of that too!
Here is a similar view to the one above, taken from a little further back, with piles of snow each side of the road.
Here is another view, No. 32 in a series published by LL. Following the death of Canon Edward Hoare, known as the "Protestant Pontiff of Tunbridge Wells", in 1894 aged 87, the gothic memorial at the entrance to Culverden Park Road was erected in his memory in Jubilee year. Edward Hoare, the Vicar of Holy Trinity Church, had been the leading figure in the religious life of the town for forty years, with congregations in his church overflowing and some coming to Tunbridge Wells just to hear him preach. The site on the left of the card now houses the telephone exchange, built in 1965; the houses behind the monument have all been demolished. In the 1980s the Hoare Memorial was threatened with demolition due to road improvements, but fortunately it proved possible to move the complete structure in one piece a few yards to the north. The pediment of the former Salem Chapel is just visible to the right of the picture.
Here is a Valentine's postcard showing the view from the tower of St John's Church looking south towards the town (the opposite view to the one above). The buildings on the right are the long demolished brewery, which can also be seen through the trees in the view above. Another view which has changed beyond recognition. Even the spire of Emmanuel Church is gone (right distance) - demolished in the 1960s.
And here is a card showing the view in the opposite direction - towards Southborough. The Skinners' School is in the top right (with the small turret).
Here is a hand coloured LL postcard showing St John's Church from the south - I would estimate the date of this is c.1910.
This colour view is taken from a more northerly location, looking back south towards the church, from a location close to the Skinners' School.
The next card, is a delightful image of children playing in the St John's Recreation Ground, number 62 in the Wells Series published by H H Camburn. I wonder if the "Standing on the Swings is not allowed" notice was ever heeded?
This view is at the Southborough end of St John's Road, in fact the road changes to Southborough Road at this point. It is a view looking north, with the Cross Keys Inn on the right. The Technical College is now where the houses on the left are. The Inn is still there. Behind the trees is Southfield Park, the playing fields for Skinners School, where I spent many a miserable games afternoon during my secondary school years. |
/* borders on top&botton */
.wpcustomEnlighterJS, .wpcustomEnlighterJSWrapper pre{
border: 1px solid #eee;
font-family: Courier, monospace;
}
/* no line borders */
ol.wpcustomEnlighterJS li, ul.wpcustomEnlighterJS li{
border: none;
line-height: 20px;
}
/* hover color */
ol.wpcustomEnlighterJS.hoverEnabled li:hover, ul.wpcustomEnlighterJS.hoverEnabled li:hover{
background-color: #ffffcc;
border: none;
}
/* special line highlight color */
ol.wpcustomEnlighterJS li.specialline, ul.wpcustomEnlighterJS li.specialline {
background-color: #fffff2;
}
/* non leading zero */
ol.wpcustomEnlighterJS {
list-style-type: decimal;
}
/** Symbol styles */
/* Raw Code Pane */
.wpcustomEnlighterJSWrapper pre{
background-color: #ffffff;
font-size: 12px;
color: #000000;
line-height: 20px;
}
.wpcustomEnlighterJSWrapper .EnlighterJSToolbar > a{
border-radius: 0px;
}
/* Tab Styles */
.wpcustomEnlighterJSTabPane .controls{
background-color: #f2f2f2;
border: 1px solid #eee;
border-bottom-width: 0px;
}
.wpcustomEnlighterJSTabPane .controls ul{
margin: 0px 0px 0px 35px;
}
.wpcustomEnlighterJSTabPane .controls li{
border-radius: 0px;
}
.wpcustomEnlighterJSTabPane .controls li.selected{
background-color: #e0e0e0;
}
.wpcustomEnlighterJSTabPane .pane{
padding: 0px;
}
.wpcustomEnlighterJSTabPane .wpcustomEnlighterJS{
border-top-color: #e0e0e0;
} |
Get the mobile country codes for calling Guantanamo Bay from Miquelon.
We hope Country Calling Codes has been of help to you in finding the calling code for your international call from Miquelon to Guantanamo Bay. Why not bookmark this page and tell a friend about this site for the next time they need to lookup an area code or international dialing code. |
Turn heads in our Zéline Dress. A must have to stand out from the crowd. Our wrap dress features a plunging neckline and high leg split. |
A statement explained that Kuru was one of the 16 public and civil servants that were recognised and honoured by the newspaper at an event that took place in Abuja recently.
Reading the citation of Kuru before he was presented the award, which was received on his behalf by Mr. Jude Nwauzor, Head, Corporate Communications, AMCON, the organisers said Kuru deserved to be celebrated because under his watch at the helm of affairs at AMCON, the corporation has sharpened its focus on recovery of debts, while keeping a disciplined check on its operating expenses.
It pointed out that the corporation under Kuru has made some ingenious decisions that have helped the government recovery agency a great deal.
One of such, according to them was that the corporation resorted to using firmer resolution strategies as well as the special enforcement powers vested in it by the AMCON Act 2010 (as amended), which has recorded impressive success in compelling recalcitrant debtors, especially those that are politically exposed and business heavyweights, to meet their obligations.
“In addition to its resolution mandate, AMCON through its interventions has saved several tens of thousands of jobs of Nigerians, who would have lost their livelihoods if their employers had been forced to close down, amongst other achievements too numerous to mention,” the statement added.
The Minister of Finance, Mrs. Zainab Ahmed, recently praised the leadership of AMCON led by Kuru for doing all within their powers to recover bad debts from some individuals that are holding the Nigerian economy to ransom.
The Minister while reminding the public that AMCON was set up as a result of the global financial crisis, which destroyed the financial sector across the globe including Nigeria, however said she was happy because AMCON against all odds has been able to recover over N1 trillion from inception to date. |
/****************************************************************************
Copyright (c) 2010-2012 cocos2d-x.org
Copyright (c) 2013-2014 Chukong Technologies Inc.
http://www.cocos2d-x.org
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
THE SOFTWARE.
****************************************************************************/
#ifndef __CC_FILEUTILS_WIN32_H__
#define __CC_FILEUTILS_WIN32_H__
#include "CCPlatformConfig.h"
#if CC_TARGET_PLATFORM == CC_PLATFORM_WIN32
#include "platform/CCFileUtils.h"
#include "CCPlatformMacros.h"
#include "ccTypes.h"
#include <string>
#include <vector>
NS_CC_BEGIN
/**
* @addtogroup platform
* @{
*/
//! @brief Helper class to handle file operations
class CC_DLL FileUtilsWin32 : public FileUtils
{
friend class FileUtils;
FileUtilsWin32();
public:
/* override funtions */
bool init();
virtual std::string getWritablePath() const;
virtual bool isFileExist(const std::string& strFilePath) const;
virtual bool isAbsolutePath(const std::string& strPath) const;
protected:
/**
* Gets resource file data
*
* @param[in] filename The resource file name which contains the path.
* @param[in] mode The read mode of the file.
* @param[out] size If the file read operation succeeds, it will be the data size, otherwise 0.
* @return Upon success, a pointer to the data is returned, otherwise NULL.
* @warning Recall: you are responsible for calling delete[] on any Non-NULL pointer returned.
*/
CC_DEPRECATED_ATTRIBUTE virtual unsigned char* getFileData(const std::string& filename, const char* mode, ssize_t * size) override;
/**
* Gets string from a file.
*/
virtual std::string getStringFromFile(const std::string& filename) override;
/**
* Creates binary data from a file.
* @return A data object.
*/
virtual Data getDataFromFile(const std::string& filename) override;
/**
* Gets full path for filename, resolution directory and search path.
*
* @param filename The file name.
* @param resolutionDirectory The resolution directory.
* @param searchPath The search path.
* @return The full path of the file. It will return an empty string if the full path of the file doesn't exist.
*/
virtual std::string getPathForFilename(const std::string& filename, const std::string& resolutionDirectory, const std::string& searchPath) override;
/**
* Gets full path for the directory and the filename.
*
* @note Only iOS and Mac need to override this method since they are using
* `[[NSBundle mainBundle] pathForResource: ofType: inDirectory:]` to make a full path.
* Other platforms will use the default implementation of this method.
* @param directory The directory contains the file we are looking for.
* @param filename The name of the file.
* @return The full path of the file, if the file can't be found, it will return an empty string.
*/
virtual std::string getFullPathForDirectoryAndFilename(const std::string& directory, const std::string& filename) override;
};
// end of platform group
/// @}
NS_CC_END
#endif // CC_TARGET_PLATFORM == CC_PLATFORM_WIN32
#endif // __CC_FILEUTILS_WIN32_H__
|
Subsets and Splits