instruction
stringclasses 1
value | input
stringlengths 210
15.6k
| output
stringclasses 86
values |
|---|---|---|
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: primary form plastic
These are the possible headings: heading 01 - Polymers of ethylene, in primary forms.
heading 02 - Polymers of propylene or of other olefins, in primary forms.
heading 03 - Polymers of styrene, in primary form s.
heading 04 - Polymers of vinyl chloride or of other halogenated olefins, in
primary forms.
heading 05 - Polymers of vinyl acetate or of other vinyl esters, in primary
forms; other vinyl polymers in primary forms.
heading 06 - Acrylic polymers in primary forms.
heading 07 - Polyacetals, other polyethers and epoxide resins, in primary
forms; polycarbonates, alkyd resins, polyallyl esters and other
polyesters, in primary forms.
heading 08 - Polyamides in primary forms.
heading 09 - Amino-resins, phenolic resins and polyurethanes, in primary
forms.
heading 10 - Silicones in primary forms.
heading 11 - Petroleum resins, coumarone-indene resins, polyterpenes,
polysulphides, polysulphones and other products specified in
Note 3 to this Chapter, not elsewhere specified or included, in
primary forms.
heading 12 - Cellulose and its chemical derivatives, not elsewhere specified or
included, in primary forms.
heading 13 - Natural polymers (for example, alginic acid) and modified
natural polymers (for example, hardened proteins, chemical
derivatives of natural rubber), not elsewhere specified or
included, in primary forms.
heading 14 - Ion-exchangers based on polymers of headings 39.01 to 39.13, in
primary forms.
heading 15 - Waste, parings and scrap, of plastics.
heading 16 - Monofilament of which any cross-sectional dimension exceeds
1 mm, rods, sticks and profile shapes, whether or not surface-
worked but not otherwise worked, of plastics.
heading 17 - Tubes, pipes and hoses, and fittings therefor (for example, joints,
elbows, flanges), of plastics.
heading 18 - Floor coverings of plastics, whether or not self-adhesive, in rolls
or in the form of tiles; wall or ceiling coverings of plastics, as
defined in Note 9 to this Chapter.
heading 19 - Self-adhesive plates, sheets, film, foil, tape, strip and other flat
shapes, of plastics, whether or not in rolls.
heading 20 - Other plates, sheets, film, foil and strip, of plastics, non-cellular
and not reinforced, laminated, supported or similarly combined
with other materials.
heading 21 - Other plates, sheets, film, foil and strip, of plastics.
heading 22 - Baths, shower-baths, sinks, wash-basins, bidets, lavatory pans,
seats and covers, flushing cisterns and similar sanitary ware, of
plastics.
heading 23 - Articles for the conveyance or packing of goods, of plastics;
stoppers, lids, caps and other closures, of plastics.
heading 24 - Tableware, kitchenware, other household articles and hygienic
or toilet articles, of plastics.
heading 25 - Builders' ware of plastics, not elsewhere specified or included.
heading 26 - Other articles of plastics and articles of other materials of
headings 39.01 to 39.14. | {"heading_id": "05"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: attendance clock
These are the possible headings: heading 01 - Wrist-watches, pocket-watches and other watches, including
stop-watches, with case of precious metal or of metal clad with
precious metal.
heading 02 - Wrist-watches, pocket-watches and other watches, including
stop-watches, other than those of heading 91.01.
heading 03 - Clocks with watch movements, excluding clocks of heading 91.04.
heading 04 - Instrument panel clocks and clocks of a similar type for vehicles,
aircraft, spacecraft or vessels.
heading 05 - Other cloc ks.
heading 06 - Time of day recording apparatus and apparatus for measuring,
recording or otherwise indicating intervals of time, with clock or
watch movement or with synchronous motor (for example, time-
registers, time-recorders).
heading 07 - Time switches with clock or watch movement or with
synchronous motor.
heading 08 - Watch movements, complete and assembled.
heading 09 - Clock movements, complete and assembled.
heading 10 - Complete watch or clock movements, unassembled or partly
assembled (movement sets); incomplete watch or clock
movements, assembled; rough watch or clock movements.
heading 11 - Watch cases and parts thereof.
heading 12 - Clock cases and cases of a similar type for other goods of this
Chapter, and parts thereof.
heading 13 - Watch straps, watch bands and watch bracelets, and parts
thereof.
heading 14 - Other clock or watch par ts. | {"heading_id": "06"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: multi yarn fabric
These are the possible headings: heading 01 - Pile fabrics, including “long pile” fabrics and terry fabrics,
knitted or crocheted.
heading 02 - Knitted or crocheted fabrics of a width not exceeding 30 cm,
containing by weight 5 % or more of elastomeric yarn or
rubber thread, other than those of heading 60.01.
heading 03 - Knitted or crocheted fabrics of a width not exceeding 30 cm,
other than those of heading 60.01 or 60.02.
heading 04 - Knitted or crocheted fabrics of a width exceeding 30 cm,
containing by weight 5 % or more of elastomeric yarn or
rubber thread, other than those of heading 60.01.
heading 05 - Warp knit fabrics (including those made on galloon knitting
machines), other than those of headings 60.01 to 60.04.
heading 06 - Other knitted or crocheted fabrics. | {"heading_id": "05"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: slim cigarette paper
These are the possible headings: heading 01 - Newsprint, in rolls or sheets.
heading 02 - Uncoated paper and paperboard, of a kind used for writing,
printing or other graphic purposes, and non perforated punch-
cards and punch tape paper, in rolls or rectangular (including
square) sheets, of any size, other than paper of heading 48.01 or
48.03; hand-made paper and paperboard.
heading 03 - Toilet or facial tissue stock, towel or napkin stock and similar
paper of a kind used for household or sanitary purposes, cellulose
wadding and webs of cellulose fibres, whether or not creped,
crinkled, embossed, perforated, surface-coloured, surface-
decorated or printed, in rolls or sheets.
heading 04 - Uncoated kraft paper and paperboard, in rolls or sheets, other
than that of heading 48.02 or 48.03.
heading 05 - Other uncoated paper and paperboard, in rolls or sheets, not
further worked or processed than as specified in Note 3 to this
Chapter.
heading 06 - Vegetable parchment, greaseproof papers, tracing papers and
glassine and other glazed transparent or translucent papers, in
rolls or sheets.
heading 07 - Composite paper and paperboard (made by sticking flat layers
of paper or paperboard together with an adhesive), not surface-
coated or impregnated, whether or not internally reinforced, in
rolls or sheets.
heading 08 - Paper and paperboard, corrugated (with or without glued flat
surface sheets), creped, crinkled, embossed or perforated, in rolls
or sheets, other than paper of the kind described in
heading 48.03.
heading 09 - Carbon paper, self-copy paper and other copying or transfer
papers (including coated or impregnated paper for duplicator
stencils or offset plates), whether or not printed, in rolls or sheets.
heading 10 - Paper and paperboard, coated on one or both sides with kaolin
(China clay) or other inorganic substances, with or without a
binder, and with no other coating, whether or not surface-
coloured, surface-decorated or printed, in rolls or rectangular
(including square) sheets, of any size.
heading 11 - Paper, paperboard, cellulose wadding and webs of cellulose
fibres, coated, impregnated, covered, surface-coloured, surface-
decorated or printed, in rolls or rectangular (including square)
sheets, of any size, other than goods of the kind described in
heading 48.03, 48.09 or 48.10.
heading 12 - Filter blocks, slabs and plates, of paper pulp.
heading 13 - Cigarette paper, whether or not cut to size or in the form of
booklets or tubes.
heading 14 - Wallpaper and similar wall coverings; window transparencies of
paper.
heading 16 - Carbon paper, self-copy paper and other copying or transfer
papers (other than those of heading 48.09), duplicator stencils
and offset plates, of paper, whether or not put up in boxes.
heading 17 - Envelopes, letter cards, plain postcards and correspondence
cards, of paper or paperboard; boxes, pouches, wallets and
writing compendiums, of paper or paperboard, containing an
assortment of paper stationery.
heading 18 - Toilet paper and similar paper, cellulose wadding or webs of
cellulose fibres, of a kind used for household or sanitary
purposes, in rolls of a width not exceeding 36 cm, or cut to size or
shape; handkerchiefs, cleansing tissues, towels, tablecloths,
serviettes, bed sheets and similar household, sanitary or hospital
articles, articles of apparel and clothing accessories, of paper
pulp, paper, cellulose wadding or webs of cellulose fibres.
heading 19 - Cartons, boxes, cases, bags and other packing containers, of
paper, paperboard, cellulose wadding or webs of cellulose fibres;
box files, letter trays, and similar articles, of paper or paperboard
of a kind used in offices, shops or the like.
- Cartons, boxes and cases, of corrugated pape
heading 20 - Registers, account books, note books, order books, receipt books,
letter pads, memorandum pads, diaries and similar articles,
exercise books, blotting-pads, binders (loose-leaf or other),
folders, file covers, manifold business forms, interleaved carbon
sets and other articles of stationery, of paper or paperboard;
albums for samples or for collections and book covers, of paper
or paperboard.
heading 21 - Paper or paperboard labels of all kinds, whether or not printed.
heading 22 - Bobbins, spools, cops and similar supports of paper pulp, paper
or paperboard (whether or not perforated or hardened).
heading 23 - Other paper, paperboard, cellulose wadding and webs of
cellulose fibres, cut to size or shape; other articles of paper pulp,
paper, paperboard, cellulose wadding or webs of cellulose fibres. | {"heading_id": "13"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: sandpaper sheets
These are the possible headings: heading 01 - Setts, curbstones and flagstones, of natural stone (except slate).
heading 02 - Worked monumental or building stone (except slate) and articles
thereof, other than goods of heading 68.01; mosaic cubes and the
like, of natural stone (including slate), whether or not on a
backing; artificially coloured granules, chippings and powder, of
natural stone (including slate).
heading 03 - Worked slate and articles of slate or of agglomerated slate.
heading 04 - Millstones, grindstones, grinding wheels and the like, without
frameworks, for grinding, sharpening, polishing, trueing or
cutting, hand sharpening or polishing stones, and parts thereof,
of natural stone, of agglomerated natural or artificial abrasives,
or of ceramics, with or without parts of other materials.
heading 05 - Natural or artificial abrasive powder or grain, on a base of textile
material, of paper, of paperboard or of other materials, whether
or not cut to shape or sewn or otherwise made up.
heading 06 - Slag wool, rock wool and similar mineral wools; exfoliated
vermiculite, expanded clays, foamed slag and similar expanded
mineral materials; mixtures and articles of heat-insulating,
sound-insulating or sound-absorbing mineral materials, other
than those of heading 68.11 or 68.12 or of Chapter 69.
heading 07 - Articles of asphalt or of similar material (for example, petroleum
bitumen or coal tar pitch).
heading 09 - Articles of plaster or of compositions based on plaster.
heading 08 - Panels, boards, tiles, blocks and similar articles of vegetable
fibre, of straw or of shavings, chips, particles, sawdust or other
waste, of wood, agglomerated with cement, plaster or other
mineral binders.
heading 10 - Articles of cement, of concrete or of artificial stone, whether or
not reinforced.
heading 11 - Articles of asbestos -cement, of cellulose fibre -cement or the like.
heading 12 - Fabricated asbestos fibres; mixtures with a basis of asbestos or
with a basis of asbestos and magnesium carbonate; articles of
such mixtures or of asbestos (for example, thread, woven fabric,
clothing, headgear, footwear, gaskets), whether or not
reinforced, other than goods of heading 68.11 or 68.13.
heading 13 - Friction material and articles thereof (for example, sheets, rolls,
strips, segments, discs, washers, pads), not mounted, for brakes,
for clutches or the like, with a basis of asbestos, of other mineral
substances or of cellulose, whether or not combined with textile
or other materials.
heading 14 - Worked mica and articles of mica, including agglomerated or
reconstituted mica, whether or not on a support of paper,
paperboard or other materials.
heading 15 - Articles of stone or of other mineral substances (including
carbon fibres, articles of carbon fibres and articles of peat), not
elsewhere specified or included.
heading 01 - Bricks, blocks, tiles and other ceramic goods of siliceous fossil
meals (for example, kieselguhr, tripolite or diatomite) or of
similar siliceous earths. | {"heading_id": "05"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: other iron items
These are the possible headings: heading 01 - Sheet piling of iron or steel, whether or not drilled, punched or
made from assembled elements; welded angles, shapes and
sections, of iron or steel.
heading 02 - Railway or tramway track construction material of iron or steel,
the following : rails, check-rails and rack rails, switch blades,
crossing frogs, point rods and other crossing pieces, sleepers
(cross-ties), fish-plates, chairs, chair wedges, sole plates (base
plates), rail clips, bedplates, ties and other material specialized
for jointing or fixing rails.
heading 03 - Tubes, pipes and hollow profiles, of cast iron.
heading 04 - Tubes, pipes and hollow profiles, seamless, of iron (other than
cast iron) or steel.
heading 05 - Other tubes and pipes (for example, welded, riveted or similarly
closed), having circular cross-sections, the external diameter of
which exceeds 406.4 mm, of iron or steel.
heading 06 - Other tubes, pipes and hollow profiles (for example, open seam
or welded, riveted or similarly closed), of iron or steel.
heading 07 - Tube or pipe fittings (for example, couplings, elbows, sleeves), of
iron or steel.
heading 08 - Structures (excluding prefabricated buildings of heading 94.06)
and parts of structures (for example, bridges and bridge-sections,
lock-gates, towers, lattice masts, roofs, roofing frame-works,
doors and windows and their frames and thresholds for doors,
shutters, balustrades, pillars and columns), of iron or steel;
plates, rods, angles, shapes, sections, tubes and the like, prepared
for use in structures, of iron or steel.
heading 09 - Reservoirs, tanks, vats and similar containers for any material
(other than compressed or liquefied gas), of iron or steel, of a
capacity exceeding 300 l, whether or not lined or heat-insulated,
but not fitted with mechanical or thermal equipment.
heading 10 - Tanks, casks, drums, cans, boxes and similar containers, for any
material (other than compressed or liquefied gas), of iron or steel,
of a capacity not exceeding 300 l, whether or not lined or heat-
insulated, but not fitted with mechanical or thermal equipment.
heading 11 - Containers for compressed or liquefied gas, of iron or steel.
heading 12 - Stranded wire, ropes, cables, plaited bands, slings and the like, of
iron or steel, not electrically insulated.
heading 13 - Barbed wire of iron or steel; twisted hoop or single flat wire,
barbed or not, and loosely twisted double wire, of a kind used for
fencing, of iron or steel.
heading 14 - Cloth (including endless bands), grill, netting and fencing, of iron
or steel wire; expanded metal of iron or steel.
heading 15 - Chain and parts thereof, of iron or steel.
heading 16 - Anchors, grapnels and parts thereof, of iron or steel.
heading 17 - Nails, tacks, drawing pins, corrugated nails, staples (other than
those of heading 83.05) and similar articles, of iron or steel,
whether or not with heads of other material, but excluding such
articles with heads of copper.
heading 18 - Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters,
cotter-pins, washers (including spring washers) and similar
articles, of iron or steel.
heading 19 - Sewing needles, knitting needles, bodkins, crochet hooks,
embroidery stilettos and similar articles, for use in the hand, of
iron or steel; safety pins and other pins of iron or steel, not
elsewhere specified or included.
heading 20 - Springs and leaves for springs, of iron or steel.
heading 21 - Stoves, ranges, grates, cookers (including those with subsidiary
boilers for central heating), barbecues, braziers, gas-rings, plate
warmers and similar non-electric domestic appliances, and parts
thereof, of iron or steel.
heading 22 - Radiators for central heating, not electrically heated, and parts
thereof, of iron or steel; air heaters and hot air distributors
(including distributors which can also distribute fresh or
conditioned air), not electrically heated, incorporating a motor-
driven fan or blower, and parts thereof, of iron or steel.
heading 23 - Table, kitchen or other household articles and parts thereof, of
iron or steel; iron or steel wool; pot scourers and scouring or
polishing pads, gloves and the like, of iron or steel.
heading 24 - Sanitary ware and parts thereof, of iron or steel.
heading 25 - Other cast articles of iron or steel.
heading 26 - Other articles of iron or steel.
heading 01 - Copper mattes; cement copper (precipitated copper).
heading 02 - Unrefined copper; copper anodes for electrolytic refining. | {"heading_id": "25"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: OLED TV screen
These are the possible headings: heading 01 - Electric motors and gene rators (excluding generating sets).
heading 02 - Electric generating sets and rotary converters.
heading 03 - Parts suitable for use solely or principally with the machines of
heading 85.01 or 85.02.
heading 04 - Electrical transformers, static converters (for example,
rectifiers) and inductors.
heading 05 - Electro-magnets; permanent magnets and articles intended to
become permanent magnets after magnetisation; electro-
magnetic or permanent magnet chucks, clamps and similar
holding devices; electro-magnetic couplings, clutches and
brakes; electro-magnetic lifting heads.
heading 06 - Primary cells and primary batteries.
heading 07 - Electric accumulators, including separators therefor, whether
or not rectangular (including square).
heading 08 - Vacuum cleaners.
heading 09 - Electro-mechanical domestic appliances, with self-contained
electric motor, other than vacuum cleaners of heading 85.08.
heading 10 - Shavers, hair clippers and hair-removing appliances, with self-
contained electric motor.
heading 11 - Electrical ignition or starting equipment of a kind used for
spark-ignition or compression-ignition internal combustion
engines (for example, ignition magnetos, magneto-dynamos,
ignition coils, sparking plugs and glow plugs, starter motors);
generators (for example, dynamos, alternators) and cut-outs of
a kind used in conjunction with such engines.
heading 12 - Electrical lighting or signalling equipment (excluding articles of
heading 85.39), windscreen wipers, defrosters and demisters, of
a kind used for cycles or motor vehicles.
heading 13 - Portable electric lamps designed to function by their own source
of energy (for example, dry batteries, accumulators, magnetos),
other than lighting equipment of heading 85.12.
heading 14 - Industrial or laboratory electric furnaces and ovens (including
those functioning by induction or dielectric loss); other
industrial or laboratory equipment for the heat treatment of
materials by induction or dielectric loss.
heading 15 - Electric (including electrically heated gas), laser or other light
or photon beam, ultrasonic, electron beam, magnetic pulse or
plasma arc soldering, brazing or welding machines and
apparatus, whether or not capable of cutting; electric machines
and apparatus for hot spraying of metals or cermets.
heading 16 - Electric instantaneous or storage water heaters and immersion
heaters; electric space heating apparatus and soil heating
apparatus; electro-thermic hair-dressing apparatus (for
example, hair dryers, hair curlers, curling tong heaters) and
hand dryers; electric smoothing irons; other electro-thermic
appliances of a kind used for domestic purposes; electric
heating resistors, other than those of heading 85.45.
heading 17 - Telephone sets, including smartphones and other telephones for
cellular networks or for other wireless networks; other
apparatus for the transmission or reception of voice, images or
other data, including apparatus for communication in a wired
or wireless network (such as a local or wide area network),
other than transmission or reception apparatus of
heading 84.43, 85.25, 85.27 or 85.28.
heading 18 - Microphones and stands therefor; loudspeakers, whether or not
mounted in their enclosures; headphones and earphones,
whether or not combined with a microphone, and sets consisting
of a microphone and one or more loudspeakers; audio-
frequency electric amplifiers; electric sound amplifier sets.
heading 19 - Sound recording or reproducing apparatus.
heading 21 - Video recording or reproducing apparatus, whether or not
incorporating a video tuner.
heading 22 - Parts and accessories suitable for use solely or principally with
the apparatus of heading 85.19 or 85.21.
heading 23 - Discs, tapes, solid-state non-volatile storage devices, “smart
cards” and other media for the recording of sound or of other
phenomena, whether or not recorded, including matrices and
masters for the production of discs, but excluding products of
Chapter 37.
heading 24 - Flat panel display modules, whether or not incorporating touch-
sensitive screens.
heading 25 - Transmission apparatus for radio-broadcasting or television,
whether or not incorporating reception apparatus or sound
recording or reproducing apparatus; television cameras, digital
cameras and video camera recorders.
heading 26 - Radar apparatus, radio navigational aid apparatus and radio
remote control apparatus.
heading 27 - Reception apparatus for radio-broadcasting, whether or not
combined, in the same housing, with sound recording or
reproducing apparatus or a clock.
heading 28 - Monitors and projectors, not incorporating television reception
apparatus; reception apparatus for television, whether or not
incorporating radio-broadcast receivers or sound or video
recording or reproducing apparatus.
heading 29 - Parts suitable for use solely or principally with the apparatus of
headings 85.24 to 85.28.
heading 30 - Electrical signalling, safety or traffic control equipment for
railways, tramways, roads, inland waterways, parking facilities,
port installations or airfields (other than those of
heading 86.08).
heading 31 - Electric sound or visual signalling apparatus (for example, bells,
sirens, indicator panels, burglar or fire alarms), other than
those of heading 85.12 or 85.30.
heading 32 - Electrical capacitors, fixed, variable or adjustable (pre -set).
heading 33 - Electrical resistors (including rheostats and potentiometers),
other than heating resistors.
heading 34 - Printed circuits.
heading 35 - Electrical apparatus for switching or protecting electrical
circuits, or for making connections to or in electrical circuits
(for example, switches, fuses, lightning arresters, voltage
limiters, surge suppressors, plugs and other connectors,
junction boxes), for a voltage exceeding 1,000 volts.
heading 36 - Electrical apparatus for switching or protecting electrical
circuits, or for making connections to or in electrical circuits
(for example, switches, relays, fuses, surge suppressors, plugs,
sockets, lamp-holders and other connectors, junction boxes), for
a voltage not exceeding 1,000 volts; connectors for optical
fibres, optical fibre bundles or cables.
heading 37 - Boards, panels, consoles, desks, cabinets and other bases,
equipped with two or more apparatus of heading 85.35 or 85.36,
for electric control or the distribution of electricity, including
those incorporating instruments or apparatus of Chapter 90,
and numerical control apparatus, other than switching
apparatus of heading 85.17.
heading 38 - Parts suitable for use solely or principally with the apparatus of
heading 85.35, 85.36 or 85.37.
heading 39 - Electric filament or discharge lamps, including sealed beam
lamp units and ultra-violet or infra-red lamps; arc-lamps; light-
emitting diode (LED) light sources.
heading 40 - Thermionic, cold cathode or photo-cathode valves and tubes
(for example, vacuum or vapour or gas filled valves and tubes,
mercury arc rectifying valves and tubes, cathode-ray tubes,
television camera tubes).
heading 41 - Semiconductor devices (for example, diodes, transistors,
semiconductor-based transducers); photosensitive
semiconductor devices, including photovoltaic cells whether or
not assembled in modules or made up into panels; light-
emitting diodes (LED), whether or not assembled with other
light-emitting diodes (LED); mounted piezo-electric crystals.
heading 42 - Electronic integrated circuits.
heading 43 - Electrical machines and apparatus, having individual functions,
not specified or included elsewhere in this Chapter.
heading 44 - Insulated (including enamelled or anodised) wire, cable
(including co-axial cable) and other insulated electric
conductors, whether or not fitted with connectors; optical fibre
cables, made up of individually sheathed fibres, whether or not
assembled with electric conductors or fitted with connectors.
heading 45 - Carbon electrodes, carbon brushes, lamp carbons, battery
carbons and other articles of graphite or other carbon, with or
without metal, of a kind used for electrical purposes.
heading 46 - Electrical insulators of any material.
heading 47 - Insulating fittings for electrical machines, appliances or
equipment, being fittings wholly of insulating material apart
from any minor components of metal (for example, threaded
sockets) incorporated during moulding solely for purposes of
assembly, other than insulators of heading 85.46; electrical
conduit tubing and joints therefor, of base metal lined with
insulating material.
heading 48 - Electrical parts of machinery or apparatus, not specified or
included elsewhere in this Chapter.
heading 49 - Electrical and electronic waste and scrap . | {"heading_id": "24"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: meslin grain
These are the possible headings: heading 01 - Wheat and meslin .
heading 02 - Rye.
heading 03 - Barley .
heading 04 - Oats .
heading 05 - Maize (corn) .
heading 06 - Rice.
heading 07 - Grain sorghum .
heading 08 - Buckwheat, millet and canary seeds; other cereals . | {"heading_id": "01"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: artillery guns
These are the possible headings: heading 01 - Military weapons, other than revolvers, pistols and the arms of
heading 93.07.
heading 02 - Revolvers and pistols, other than those of heading 93.03 or 93.04.
heading 03 - Other firearms and similar devices which operate by the firing of
an explosive charge (for example, sporting shotguns and rifles,
muzzle-loading firearms, Very pistols and other devices designed
to project only signal flares, pistols and revolvers for firing blank
ammunition, captive-bolt humane killers, line-throwing guns).
heading 04 - Other arms (for example, spring, air or gas guns and pistols,
truncheons), excluding those of heading 93.07.
heading 05 - Parts and accessories of articles of headings 93.01 to 93.04.
heading 06 - Bombs, grenades, torpedoes, mines, missiles and similar
munitions of war and parts thereof; cartridges and other
ammunition and projectiles and parts thereof, including shot and
cartridge wads.
heading 07 - Swords, cutlasses, bayonets, lances and similar arms and parts
thereof and scabbards and sheaths therefor. | {"heading_id": "01"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: order phenols
These are the possible headings: heading 01 - Acyclic hydrocarbons .
heading 02 - Cyclic hydrocarbons .
heading 03 - Halogenated derivatives of hydrocarbons .
heading 04 - Sulphonated, nitrated or nitrosated derivatives of hydrocarbons,
heading 05 - Acyclic alcohols and their halogenated, sulphonated, nitrated or
heading 06 - Cyclic alcohols and their halogenated, sulphonated, nitrated or
heading 07 - Phenols; phenol -alcohols .
heading 08 - Halogenated, sulphonated, nitrated or nitrosated derivatives of
heading 09 - Ethers, ether -alcohols, ether -phenols, ether -alcohol -phenols,
heading 10 - Epoxides, epoxyalcohols, epoxyphenols and epoxyethers, with a
heading 12 - Aldehydes, whether or not with other oxygen function; cyclic
heading 15 - Saturated acyclic monocarboxylic acids and their anhydrides,
heading 16 - Unsaturated acyclic monocarboxylic acids, cyclic monocarboxylic
heading 17 - Polycarboxylic acids, their anhydrides, halides, peroxides and
heading 18 - Carboxylic acids with additional oxygen function and their
heading 19 - Phosphoric esters and their salts, including lactophosphates;
heading 20 - Esters of other inorganic acids of non -metals (excluding esters
heading 21 - Amine -function compounds.
heading 22 - Oxygen -function amino -compounds.
heading 23 - Quaternary ammonium salts and hydroxides; lecithins and
heading 24 - Carboxyamide -function compounds; amide -function compounds
heading 25 - Carboxyimide -function compounds (including saccharin and its
heading 26 - Nitrile -function compounds.
heading 30 - Organo -sulphur compounds.
heading 31 - Other organo -inorganic compounds .
heading 32 - Heterocyclic compounds with oxygen hetero -atom(s) only.
heading 33 - Heterocyclic compounds with nitrogen hetero -atom(s) only.
heading 34 - Nucleic acids and their salts, whether or not chemically defined;
heading 35 - Sulphonamides.
heading 36 - Provitamins and vitamins, natural or reproduced by synthesis
heading 37 - Hormones, prostaglandins, thromboxanes and leukotrienes,
heading 38 - Glycosides, natural or reproduced by synthesis, and their salts,
heading 39 - Alkaloids, natural or reproduced by synthesis, and their salts, | {"heading_id": "07"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: sea food sea cucumbers
These are the possible headings: heading 01 - Live fish .
heading 02 - Fish, fresh or chilled, excluding fish fillets and other fish meat of
heading 03.04.
heading 03 - Fish, frozen, excluding fish fillets and other fish meat of heading
03.04.
heading 04 - Fish fillets and other fish meat (whether or not minced), fresh,
chilled or frozen.
heading 05 - Fish, dried, salted or in brine; smoked fish, whether or not
cooked before or during the smoking process.
heading 06 - Crustaceans, whether in shell or not, live, fresh, chilled, frozen,
dried, salted or in brine; smoked crustaceans, whether in shell
or not, whether or not cooked before or during the smoking
process; crustaceans, in shell, cooked by steaming or by boiling
in water, whether or not chilled, frozen, dried, salted or in
brine.
heading 07 - Molluscs, whether in shell or not, live, fresh, chilled, frozen,
dried, salted or in brine; smoked molluscs, whether in shell or
not, whether or not cooked before or during the smoking
process.
heading 08 - Aquatic invertebrates other than crustaceans and molluscs, live,
fresh, chilled, frozen, dried, salted or in brine; smoked aquatic
invertebrates other than crustaceans and molluscs, whether or
not cooked before or during the smoking process.
heading 09 - Flours, meals and pellets of fish, crustaceans, molluscs and
other aquatic invertebrates, fit for human consumption. | {"heading_id": "08"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: nitrogen heterocyclic
These are the possible headings: heading 01 - Acyclic hydrocarbons .
heading 02 - Cyclic hydrocarbons .
heading 03 - Halogenated derivatives of hydrocarbons .
heading 04 - Sulphonated, nitrated or nitrosated derivatives of hydrocarbons,
heading 05 - Acyclic alcohols and their halogenated, sulphonated, nitrated or
heading 06 - Cyclic alcohols and their halogenated, sulphonated, nitrated or
heading 07 - Phenols; phenol -alcohols .
heading 08 - Halogenated, sulphonated, nitrated or nitrosated derivatives of
heading 09 - Ethers, ether -alcohols, ether -phenols, ether -alcohol -phenols,
heading 10 - Epoxides, epoxyalcohols, epoxyphenols and epoxyethers, with a
heading 12 - Aldehydes, whether or not with other oxygen function; cyclic
heading 15 - Saturated acyclic monocarboxylic acids and their anhydrides,
heading 16 - Unsaturated acyclic monocarboxylic acids, cyclic monocarboxylic
heading 17 - Polycarboxylic acids, their anhydrides, halides, peroxides and
heading 18 - Carboxylic acids with additional oxygen function and their
heading 19 - Phosphoric esters and their salts, including lactophosphates;
heading 20 - Esters of other inorganic acids of non -metals (excluding esters
heading 21 - Amine -function compounds.
heading 22 - Oxygen -function amino -compounds.
heading 23 - Quaternary ammonium salts and hydroxides; lecithins and
heading 24 - Carboxyamide -function compounds; amide -function compounds
heading 25 - Carboxyimide -function compounds (including saccharin and its
heading 26 - Nitrile -function compounds.
heading 30 - Organo -sulphur compounds.
heading 31 - Other organo -inorganic compounds .
heading 32 - Heterocyclic compounds with oxygen hetero -atom(s) only.
heading 33 - Heterocyclic compounds with nitrogen hetero -atom(s) only.
heading 34 - Nucleic acids and their salts, whether or not chemically defined;
heading 35 - Sulphonamides.
heading 36 - Provitamins and vitamins, natural or reproduced by synthesis
heading 37 - Hormones, prostaglandins, thromboxanes and leukotrienes,
heading 38 - Glycosides, natural or reproduced by synthesis, and their salts,
heading 39 - Alkaloids, natural or reproduced by synthesis, and their salts, | {"heading_id": "33"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: methacrylate plate
These are the possible headings: heading 01 - Polymers of ethylene, in primary forms.
heading 02 - Polymers of propylene or of other olefins, in primary forms.
heading 03 - Polymers of styrene, in primary form s.
heading 04 - Polymers of vinyl chloride or of other halogenated olefins, in
primary forms.
heading 05 - Polymers of vinyl acetate or of other vinyl esters, in primary
forms; other vinyl polymers in primary forms.
heading 06 - Acrylic polymers in primary forms.
heading 07 - Polyacetals, other polyethers and epoxide resins, in primary
forms; polycarbonates, alkyd resins, polyallyl esters and other
polyesters, in primary forms.
heading 08 - Polyamides in primary forms.
heading 09 - Amino-resins, phenolic resins and polyurethanes, in primary
forms.
heading 10 - Silicones in primary forms.
heading 11 - Petroleum resins, coumarone-indene resins, polyterpenes,
polysulphides, polysulphones and other products specified in
Note 3 to this Chapter, not elsewhere specified or included, in
primary forms.
heading 12 - Cellulose and its chemical derivatives, not elsewhere specified or
included, in primary forms.
heading 13 - Natural polymers (for example, alginic acid) and modified
natural polymers (for example, hardened proteins, chemical
derivatives of natural rubber), not elsewhere specified or
included, in primary forms.
heading 14 - Ion-exchangers based on polymers of headings 39.01 to 39.13, in
primary forms.
heading 15 - Waste, parings and scrap, of plastics.
heading 16 - Monofilament of which any cross-sectional dimension exceeds
1 mm, rods, sticks and profile shapes, whether or not surface-
worked but not otherwise worked, of plastics.
heading 17 - Tubes, pipes and hoses, and fittings therefor (for example, joints,
elbows, flanges), of plastics.
heading 18 - Floor coverings of plastics, whether or not self-adhesive, in rolls
or in the form of tiles; wall or ceiling coverings of plastics, as
defined in Note 9 to this Chapter.
heading 19 - Self-adhesive plates, sheets, film, foil, tape, strip and other flat
shapes, of plastics, whether or not in rolls.
heading 20 - Other plates, sheets, film, foil and strip, of plastics, non-cellular
and not reinforced, laminated, supported or similarly combined
with other materials.
heading 21 - Other plates, sheets, film, foil and strip, of plastics.
heading 22 - Baths, shower-baths, sinks, wash-basins, bidets, lavatory pans,
seats and covers, flushing cisterns and similar sanitary ware, of
plastics.
heading 23 - Articles for the conveyance or packing of goods, of plastics;
stoppers, lids, caps and other closures, of plastics.
heading 24 - Tableware, kitchenware, other household articles and hygienic
or toilet articles, of plastics.
heading 25 - Builders' ware of plastics, not elsewhere specified or included.
heading 26 - Other articles of plastics and articles of other materials of
headings 39.01 to 39.14. | {"heading_id": "20"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: multi ply yarn
These are the possible headings: heading 01 - Flax, raw or processed but not spun; flax tow and waste
(including yarn waste and garnetted stock).
heading 02 - True hemp (Cannabis sativa L.), raw or processed but not spun;
tow and waste of true hemp (including yarn waste and garnetted
stock).
heading 03 - Jute and other textile bast fibres (excluding flax, true hemp and
ramie), raw or processed but not spun; tow and waste of these
fibres (including yarn waste and garnetted stock).
heading 05 - Coconut, abaca (Manila hemp or Musa textilis Nee), ramie and
other vegetable textile fibres, not elsewhere specified or included,
raw or processed but not spun; tow, noils and waste of these
fibres (including yarn waste and garnetted stock).
heading 06 - Flax yarn.
heading 07 - Yarn of jute or of other textile bast fibres of heading 53.03.
heading 08 - Yarn of other vegetable textile fibres; paper yarn.
heading 09 - Woven fabrics of flax.
heading 10 - Woven fabrics of jute or of other textile bast fibres of
heading 53.03.
heading 11 - Woven fabrics of other vegetable textile fibres; woven fabrics of
paper yarn. | {"heading_id": "06"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: howitzers sale
These are the possible headings: heading 01 - Military weapons, other than revolvers, pistols and the arms of
heading 93.07.
heading 02 - Revolvers and pistols, other than those of heading 93.03 or 93.04.
heading 03 - Other firearms and similar devices which operate by the firing of
an explosive charge (for example, sporting shotguns and rifles,
muzzle-loading firearms, Very pistols and other devices designed
to project only signal flares, pistols and revolvers for firing blank
ammunition, captive-bolt humane killers, line-throwing guns).
heading 04 - Other arms (for example, spring, air or gas guns and pistols,
truncheons), excluding those of heading 93.07.
heading 05 - Parts and accessories of articles of headings 93.01 to 93.04.
heading 06 - Bombs, grenades, torpedoes, mines, missiles and similar
munitions of war and parts thereof; cartridges and other
ammunition and projectiles and parts thereof, including shot and
cartridge wads.
heading 07 - Swords, cutlasses, bayonets, lances and similar arms and parts
thereof and scabbards and sheaths therefor. | {"heading_id": "01"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: silk waste tie
These are the possible headings: heading 01 - Men’s or boys’ overcoats, car-coats, capes, cloaks, anoraks
(including ski-jackets), wind-cheaters, wind-jackets and similar
articles, other than those of heading 62.03.
heading 02 - Women's or girls' overcoats, car-coats, capes, cloaks, anoraks
(including ski-jackets), wind-cheaters, wind-jackets and similar
articles, other than those of heading 62.04.
heading 03 - Men's or boys' suits, ensembles, jackets, blazers, trousers, bib
and brace overalls, breeches and shorts (other than swimwear).
heading 04 - Women's or girls' suits, ensembles, jackets, blazers, dresses,
skirts, divided skirts, trousers, bib and brace overalls, breeches
and shorts (other than swimwear).
heading 05 - Men's or boys' shirts.
heading 06 - Women's or girls' blous es, shirts and sh irt-blouses.
heading 07 - Men's or boys' singlets and other vests, underpants, briefs,
nightshirts, pyjamas, bathrobes, dressing gowns and similar
articles.
heading 08 - Women's or girls' singlets and other vests, slips, petticoats, briefs,
panties, nightdresses, pyjamas, negligees, bathrobes, dressing
gowns and similar articles.
heading 09 - Babies' garments and clothing accessories.
heading 10 - Garments, made up of fabrics of heading 56.02, 56.03, 59.03,
59.06 or 59.07.
heading 11 - Track suits, ski suits and swimwear; other garments.
heading 12 - Brassieres, girdles, corsets, braces, suspenders, garters and
similar articles and parts thereof, whether or not knitted or
crocheted.
heading 13 - Handkerchiefs.
heading 14 - Shawls, scarves, mufflers, mantillas, vei ls and the like.
heading 15 - Ties, bow ties and cravats.
heading 16 - Gloves, mittens and mitts.
heading 17 - Other made up clothing accessories; parts of garments or of
clothing accessories, other than those of heading 62.12 | {"heading_id": "15"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: old printing machine
These are the possible headings: heading 01 - Nuclear reactors; fuel elements (cartridges), non-irradiated, for
nuclear reactors; machinery and apparatus for isotopic
separation.
heading 02 - Steam or other vapour generating boilers (other than central
heating hot water boilers capable also of producing low pressure
steam); super-heated water boilers.
heading 03 - Central heating boilers other than those of heading 84.02.
heading 04 - Auxiliary plant for use with boilers of heading 84.02 or 84.03 (for
example, economisers, super-heaters, soot removers, gas
recoverers); condensers for steam or other vapour power units.
heading 05 - Producer gas or water gas generators, with or without their
purifiers; acetylene gas generators and similar water process gas
generators, with or without their purifiers.
heading 06 - Steam turbines and other vapour turbines.
heading 07 - Spark-ignition reciprocating or rotary internal combustion
piston engines.
heading 08 - Compression-ignition internal combustion piston engines (diesel
or semi-diesel engines).
heading 09 - Parts suitable for use solely or principally with the engines of
heading 84.07 or 84.08.
heading 10 - Hydraulic turbines, water wheels, and regulators therefor.
heading 11 - Turbo -jets, turbo -propellers and other gas turbines.
heading 12 - Othe r engines and motors.
heading 13 - Pumps for liquids, whether or not fitted with a measuring device;
liquid elevators.
heading 14 - Air or vacuum pumps, air or other gas compressors and fans;
ventilating or recycling hoods incorporating a fan, whether or not
fitted with filters; gas-tight biological safety cabinets, whether
or not fitted with filters.
heading 15 - Air conditioning machines, comprising a motor-driven fan and
elements for changing the temperature and humidity, including
those machines in which the humidity cannot be separately
regulated.
heading 16 - Furnace burners for liquid fuel, for pulverised solid fuel or for
gas; mechanical stokers, including their mechanical grates,
mechanical ash dischargers and similar appliances.
heading 17 - Industrial or laboratory furnaces and ovens, including
incinerators, non-electric.
heading 18 - Refrigerators, freezers and other refrigerating or freezing
equipment, electric or other; heat pumps other than air
conditioning machines of heading 84.15.
heading 19 - Machinery, plant or laboratory equipment, whether or not
electrically heated (excluding furnaces, ovens and other
equipment of heading 85.14), for the treatment of materials by a
process involving a change of temperature such as heating,
cooking, roasting, distilling, rectifying, sterilising, pasteurising,
steaming, drying, evaporating, vaporising, condensing or cooling,
other than machinery or plant of a kind used for domestic
purposes; instantaneous or storage water heaters, non-electric.
heading 20 - Calendering or other rolling machines, other than for metals or
glass, and cylinders therefor.
heading 21 - Centrifuges, including centrifugal dryers; filtering or purifying
machinery and apparatus, for liquids or gases.
heading 22 - Dish washing machines; machinery for cleaning or drying bottles
or other containers; machinery for filling, closing, sealing or
labelling bottles, cans, boxes, bags or other containers; machinery
for capsuling bottles, jars, tubes and similar containers; other
packing or wrapping machinery (including heat-shrink wrapping
machinery); machinery for aerating beverages.
heading 23 - Weighing machinery (excluding balances of a sensitivity of 5 cg
or better), including weight operated counting or checking
machines; weighing machine weights of all kinds.
heading 24 - Mechanical appliances (whether or not hand-operated) for
projecting, dispersing or spraying liquids or powders; fire
extinguishers, whether or not charged; spray guns and similar
appliances; steam or sand blasting machines and similar jet
projecting machines.
heading 25 - Pulley tackle and hoists other than skip hoists; winches and
capstans; jacks.
heading 26 - Ships' derricks; cranes, including cable cranes; mobile lifting
frames, straddle carriers and works trucks fitted with a crane.
heading 27 - Fork-lift trucks; other works trucks fitted with lifting or handling
equipment.
heading 28 - Other lifting, handling, loading or unloading machinery (for
example, lifts, escalators, conveyors, teleferics).
heading 29 - Self-propelled bulldozers, angledozers, graders, levellers,
scrapers, mechanical shovels, excavators, shovel loaders, tamping
machines and road rollers.
heading 30 - Other moving, grading, levelling, scraping, excavating, tamping,
compacting, extracting or boring machinery, for earth, minerals
or ores; pile-drivers and pile-extractors; snow-ploughs and snow-
blowers.
heading 31 - Parts suitable for use solely or principally with the machinery of
headings 84.25 to 84.30.
heading 32 - Agricultural, horticultural or forestry machinery for soil
preparation or cultivation; lawn or sports-ground rollers.
heading 33 - Harvesting or threshing machinery, including straw or fodder
balers; grass or hay mowers; machines for cleaning, sorting or
grading eggs, fruit or other agricultural produce, other than
machinery of heading 84.37.
heading 34 - Milking machines and dairy ma chinery.
heading 35 - Presses, crushers and similar machinery used in the manufacture
of wine, cider, fruit juices or similar beverages.
heading 36 - Other agricultural, horticultural, forestry, poultry-keeping or
bee-keeping machinery, including germination plant fitted with
mechanical or thermal equipment; poultry incubators and
brooders.
heading 37 - Machines for cleaning, sorting or grading seed, grain or dried
leguminous vegetables; machinery used in the milling industry or
for the working of cereals or dried leguminous vegetables, other
than farm-type machinery.
heading 38 - Machinery, not specified or included elsewhere in this Chapter,
for the industrial preparation or manufacture of food or drink,
other than machinery for the extraction or preparation of
animal or fixed vegetable or microbial fats or oils.
heading 39 - Machinery for making pulp of fibrous cellulosic material or for
making or finishing paper or paperboard.
heading 40 - Book -binding machinery, including book -sewing machines.
heading 41 - Other machinery for making up paper pulp, paper or
paperboard, including cutting machines of all kinds.
heading 42 - Machinery, apparatus and equipment (other than the machines
of headings 84.56 to 84.65) for preparing or making plates,
cylinders or other printing components; plates, cylinders and
other printing components; plates, cylinders and lithographic
stones, prepared for printing purposes (for example, planed,
grained or polished).
heading 43 - Printing machinery used for printing by means of plates,
cylinders and other printing components of heading 84.42;
other printers, copying machines and facsimile machines,
whether or not combined; parts and accessories thereof.
heading 44 - Machines for extruding, drawing, texturing or cutting man-
made textile materials.
heading 45 - Machines for preparing textile fibres; spinning, doubling or
twisting machines and other machinery for producing textile
yarns; textile reeling or winding (including weft-winding)
machines and machines for preparing textile yarns for use on
the machines of heading 84.46 or 84.47.
heading 46 - Weaving machines (looms).
heading 47 - Knitting machines, stitch-bonding machines and machines for
making gimped yarn, tulle, lace, embroidery, trimmings, braid
or net and machines for tufting.
heading 48 - Auxiliary machinery for use with machines of heading 84.44,
84.45, 84.46 or 84.47 (for example, dobbies, Jacquards,
automatic stop motions, shuttle changing mechanisms); parts
and accessories suitable for use solely or principally with the
machines of this heading or of heading 84.44, 84.45, 84.46 or
84.47 (for example, spindles and spindle flyers, card clothing,
combs, extruding nipples, shuttles, healds and heald-frames,
hosiery needles).
heading 49 - Machinery for the manufacture or finishing of felt or
nonwovens in the piece or in shapes, including machinery for
making felt hats; blocks for making hats.
heading 50 - Household or laundry-type washing machines, including
machines which both wash and dry.
heading 51 - Machinery (other than machines of heading 84.50) for washing,
cleaning, wringing, drying, ironing, pressing (including fusing
presses), bleaching, dyeing, dressing, finishing, coating or
impregnating textile yarns, fabrics or made up textile articles
and machines for applying the paste to the base fabric or other
support used in the manufacture of floor coverings such as
linoleum; machines for reeling, unreeling, folding, cutting or
pinking textile fabrics.
heading 52 - Sewing machines, other than book-sewing machines of
heading 84.40; furniture, bases and covers specially designed
for sewing machines; sewing machine needles.
heading 53 - Machinery for preparing, tanning or working hides, skins or
leather or for making or repairing footwear or other articles of
hides, skins or leather, other than sewing machines.
heading 54 - Converters, ladles, ingot moulds and casting machines, of a kind
used in metallurgy or in metal foundries.
heading 55 - Metal -rolling mills and rolls therefor.
heading 56 - Machine-tools for working any material by removal of material,
by laser or other light or photon beam, ultrasonic, electro-
discharge, electro-chemical, electron beam, ionic-beam or
plasma arc processes; water-jet cutting machines.
heading 57 - Machining centres, unit construction machines (single station)
and multi-station transfer machines, for working metal.
heading 58 - Lathes (including turning centres) for removing metal.
heading 59 - Machine-tools (including way-type unit head machines) for
drilling, boring, milling, threading or tapping by removing
metal, other than lathes (including turning centres) of
heading 84.58.
heading 60 - Machine-tools for deburring, sharpening, grinding, honing,
lapping, polishing or otherwise finishing metal or cermets by
means of grinding stones, abrasives or polishing products, other
than gear cutting, gear grinding or gear finishing machines of
heading 84.61.
heading 61 - Machine-tools for planing, shaping, slotting, broaching, gear
cutting, gear grinding or gear finishing, sawing, cutting-off and
other machine-tools working by removing metal or cermets, not
elsewhere specified or included.
heading 62 - Machine-tools (including presses) for working metal by forging,
hammering or die forging (excluding rolling mills);
machine-tools (including presses, slitting lines and cut-to-length
lines) for working metal by bending, folding, straightening,
flattening, shearing, punching, notching or nibbling (excluding
draw-benches); presses for working metal or metal carbides,
not specified above.
heading 63 - Other machine-tools for working metal or cermets, without
removing material.
heading 64 - Machine-tools for working stone, ceramics, concrete, asbestos-
cement or like mineral materials or for cold working glass
heading 65 - Machine-tools (including machines for nailing, stapling, glueing
or otherwise assembling) for working wood, cork, bone, hard
rubber, hard plastics or similar hard materials.
heading 66 - Parts and accessories suitable for use solely or principally with
the machines of headings 84.56 to 84.65, including work or tool
holders, self-opening dieheads, dividing heads and other special
attachments for the machines; tool holders for any type of tool
for working in the hand.
heading 67 - Tools for working in the hand, pneumatic, hydraulic or with
self-contained electric or non-electric motor.
heading 68 - Machinery and apparatus for soldering, brazing or welding,
whether or not capable of cutting, other than those of
heading 85.15; gas-operated surface tempering machines and
appliances.
heading 70 - Calculating machines and pocket-size data recording,
reproducing and displaying machines with calculating
functions; accounting machines, postage-franking machines,
ticket-issuing machines and similar machines, incorporating a
calculating device; cash registers.
heading 71 - Automatic data processing machines and units thereof;
magnetic or optical readers, machines for transcribing data
onto data media in coded form and machines for processing
such data, not elsewhere specified or included.
heading 72 - Other office machines (for example, hectograph or stencil
duplicating machines, addressing machines, automatic
banknote dispensers, coin-sorting machines, coin-counting or
wrapping machines, pencil-sharpening machines, perforating or
stapling machines).
heading 73 - Parts and accessories (other than covers, carrying cases and the
like) suitable for use solely or principally with machines of
headings 84.70 to 84.72.
heading 74 - Machinery for sorting, screening, separating, washing,
crushing, grinding, mixing or kneading earth, stone, ores or
other mineral substances, in solid (including powder or paste)
form; machinery for agglomerating, shaping or moulding solid
mineral fuels, ceramic paste, unhardened cements, plastering
materials or other mineral products in powder or paste form;
machines for forming foundry moulds of sand.
heading 75 - Machines for assembling electric or electronic lamps, tubes or
valves or flashbulbs, in glass envelopes; machines for
manufacturing or hot working glass or glassware.
heading 76 - Automatic goods-vending machines (for example, postage
stamp, cigarette, food or beverage machines), including money-
changing machines.
heading 77 - Machinery for working rubber or plastics or for the
manufacture of products from these materials, not specified or
included elsewhere in this Chapter.
heading 78 - Machinery for preparing or making up tobacco, not specified or
included elsewhere in this Chapter.
heading 79 - Machines and mechanical appliances having individual
functions, not specified or included elsewhere in this Chapter.
heading 80 - Moulding boxes for metal foundry; mould bases; moulding
patterns; moulds for metal (other than ingot moulds), metal
carbides, glass, mineral materials, rubber or plastics.
heading 81 - Taps, cocks, valves and similar appliances for pipes, boiler
shells, tanks, vats or the like, including pressure-reducing valves
and thermostatically controlled valves.
heading 82 - Ball or roller bearings.
heading 83 - Transmission shafts (including cam shafts and crank shafts)
and cranks; bearing housings and plain shaft bearings; gears
and gearing; ball or roller screws; gear boxes and other speed
changers, including torque converters; flywheels and pulleys,
including pulley blocks; clutches and shaft couplings (including
universal joints).
heading 84 - Gaskets and similar joints of metal sheeting combined with
other material or of two or more layers of metal; sets or
assortments of gaskets and similar joints, dissimilar in
composition, put up in pouches, envelopes or similar packings;
mechanical seals.
heading 85 - Mac hines for additive manufacturing.
heading 86 - Machines and apparatus of a kind used solely or principally for
the manufacture of semiconductor boules or wafers,
semiconductor devices, electronic integrated circuits or flat
panel displays; machines and apparatus specified in Note 11 (C)
to this Chapter; parts and accessories.
heading 87 - Machinery parts, not containing electrical connectors,
insulators, coils, contacts or other electrical features, not
specified or included elsewhere in this Chapter. | {"heading_id": "43"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: optical fiber cable
These are the possible headings: heading 01 - Electric motors and gene rators (excluding generating sets).
heading 02 - Electric generating sets and rotary converters.
heading 03 - Parts suitable for use solely or principally with the machines of
heading 85.01 or 85.02.
heading 04 - Electrical transformers, static converters (for example,
rectifiers) and inductors.
heading 05 - Electro-magnets; permanent magnets and articles intended to
become permanent magnets after magnetisation; electro-
magnetic or permanent magnet chucks, clamps and similar
holding devices; electro-magnetic couplings, clutches and
brakes; electro-magnetic lifting heads.
heading 06 - Primary cells and primary batteries.
heading 07 - Electric accumulators, including separators therefor, whether
or not rectangular (including square).
heading 08 - Vacuum cleaners.
heading 09 - Electro-mechanical domestic appliances, with self-contained
electric motor, other than vacuum cleaners of heading 85.08.
heading 10 - Shavers, hair clippers and hair-removing appliances, with self-
contained electric motor.
heading 11 - Electrical ignition or starting equipment of a kind used for
spark-ignition or compression-ignition internal combustion
engines (for example, ignition magnetos, magneto-dynamos,
ignition coils, sparking plugs and glow plugs, starter motors);
generators (for example, dynamos, alternators) and cut-outs of
a kind used in conjunction with such engines.
heading 12 - Electrical lighting or signalling equipment (excluding articles of
heading 85.39), windscreen wipers, defrosters and demisters, of
a kind used for cycles or motor vehicles.
heading 13 - Portable electric lamps designed to function by their own source
of energy (for example, dry batteries, accumulators, magnetos),
other than lighting equipment of heading 85.12.
heading 14 - Industrial or laboratory electric furnaces and ovens (including
those functioning by induction or dielectric loss); other
industrial or laboratory equipment for the heat treatment of
materials by induction or dielectric loss.
heading 15 - Electric (including electrically heated gas), laser or other light
or photon beam, ultrasonic, electron beam, magnetic pulse or
plasma arc soldering, brazing or welding machines and
apparatus, whether or not capable of cutting; electric machines
and apparatus for hot spraying of metals or cermets.
heading 16 - Electric instantaneous or storage water heaters and immersion
heaters; electric space heating apparatus and soil heating
apparatus; electro-thermic hair-dressing apparatus (for
example, hair dryers, hair curlers, curling tong heaters) and
hand dryers; electric smoothing irons; other electro-thermic
appliances of a kind used for domestic purposes; electric
heating resistors, other than those of heading 85.45.
heading 17 - Telephone sets, including smartphones and other telephones for
cellular networks or for other wireless networks; other
apparatus for the transmission or reception of voice, images or
other data, including apparatus for communication in a wired
or wireless network (such as a local or wide area network),
other than transmission or reception apparatus of
heading 84.43, 85.25, 85.27 or 85.28.
heading 18 - Microphones and stands therefor; loudspeakers, whether or not
mounted in their enclosures; headphones and earphones,
whether or not combined with a microphone, and sets consisting
of a microphone and one or more loudspeakers; audio-
frequency electric amplifiers; electric sound amplifier sets.
heading 19 - Sound recording or reproducing apparatus.
heading 21 - Video recording or reproducing apparatus, whether or not
incorporating a video tuner.
heading 22 - Parts and accessories suitable for use solely or principally with
the apparatus of heading 85.19 or 85.21.
heading 23 - Discs, tapes, solid-state non-volatile storage devices, “smart
cards” and other media for the recording of sound or of other
phenomena, whether or not recorded, including matrices and
masters for the production of discs, but excluding products of
Chapter 37.
heading 24 - Flat panel display modules, whether or not incorporating touch-
sensitive screens.
heading 25 - Transmission apparatus for radio-broadcasting or television,
whether or not incorporating reception apparatus or sound
recording or reproducing apparatus; television cameras, digital
cameras and video camera recorders.
heading 26 - Radar apparatus, radio navigational aid apparatus and radio
remote control apparatus.
heading 27 - Reception apparatus for radio-broadcasting, whether or not
combined, in the same housing, with sound recording or
reproducing apparatus or a clock.
heading 28 - Monitors and projectors, not incorporating television reception
apparatus; reception apparatus for television, whether or not
incorporating radio-broadcast receivers or sound or video
recording or reproducing apparatus.
heading 29 - Parts suitable for use solely or principally with the apparatus of
headings 85.24 to 85.28.
heading 30 - Electrical signalling, safety or traffic control equipment for
railways, tramways, roads, inland waterways, parking facilities,
port installations or airfields (other than those of
heading 86.08).
heading 31 - Electric sound or visual signalling apparatus (for example, bells,
sirens, indicator panels, burglar or fire alarms), other than
those of heading 85.12 or 85.30.
heading 32 - Electrical capacitors, fixed, variable or adjustable (pre -set).
heading 33 - Electrical resistors (including rheostats and potentiometers),
other than heating resistors.
heading 34 - Printed circuits.
heading 35 - Electrical apparatus for switching or protecting electrical
circuits, or for making connections to or in electrical circuits
(for example, switches, fuses, lightning arresters, voltage
limiters, surge suppressors, plugs and other connectors,
junction boxes), for a voltage exceeding 1,000 volts.
heading 36 - Electrical apparatus for switching or protecting electrical
circuits, or for making connections to or in electrical circuits
(for example, switches, relays, fuses, surge suppressors, plugs,
sockets, lamp-holders and other connectors, junction boxes), for
a voltage not exceeding 1,000 volts; connectors for optical
fibres, optical fibre bundles or cables.
heading 37 - Boards, panels, consoles, desks, cabinets and other bases,
equipped with two or more apparatus of heading 85.35 or 85.36,
for electric control or the distribution of electricity, including
those incorporating instruments or apparatus of Chapter 90,
and numerical control apparatus, other than switching
apparatus of heading 85.17.
heading 38 - Parts suitable for use solely or principally with the apparatus of
heading 85.35, 85.36 or 85.37.
heading 39 - Electric filament or discharge lamps, including sealed beam
lamp units and ultra-violet or infra-red lamps; arc-lamps; light-
emitting diode (LED) light sources.
heading 40 - Thermionic, cold cathode or photo-cathode valves and tubes
(for example, vacuum or vapour or gas filled valves and tubes,
mercury arc rectifying valves and tubes, cathode-ray tubes,
television camera tubes).
heading 41 - Semiconductor devices (for example, diodes, transistors,
semiconductor-based transducers); photosensitive
semiconductor devices, including photovoltaic cells whether or
not assembled in modules or made up into panels; light-
emitting diodes (LED), whether or not assembled with other
light-emitting diodes (LED); mounted piezo-electric crystals.
heading 42 - Electronic integrated circuits.
heading 43 - Electrical machines and apparatus, having individual functions,
not specified or included elsewhere in this Chapter.
heading 44 - Insulated (including enamelled or anodised) wire, cable
(including co-axial cable) and other insulated electric
conductors, whether or not fitted with connectors; optical fibre
cables, made up of individually sheathed fibres, whether or not
assembled with electric conductors or fitted with connectors.
heading 45 - Carbon electrodes, carbon brushes, lamp carbons, battery
carbons and other articles of graphite or other carbon, with or
without metal, of a kind used for electrical purposes.
heading 46 - Electrical insulators of any material.
heading 47 - Insulating fittings for electrical machines, appliances or
equipment, being fittings wholly of insulating material apart
from any minor components of metal (for example, threaded
sockets) incorporated during moulding solely for purposes of
assembly, other than insulators of heading 85.46; electrical
conduit tubing and joints therefor, of base metal lined with
insulating material.
heading 48 - Electrical parts of machinery or apparatus, not specified or
included elsewhere in this Chapter.
heading 49 - Electrical and electronic waste and scrap . | {"heading_id": "44"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: heavy duty washing machine
These are the possible headings: heading 01 - Nuclear reactors; fuel elements (cartridges), non-irradiated, for
nuclear reactors; machinery and apparatus for isotopic
separation.
heading 02 - Steam or other vapour generating boilers (other than central
heating hot water boilers capable also of producing low pressure
steam); super-heated water boilers.
heading 03 - Central heating boilers other than those of heading 84.02.
heading 04 - Auxiliary plant for use with boilers of heading 84.02 or 84.03 (for
example, economisers, super-heaters, soot removers, gas
recoverers); condensers for steam or other vapour power units.
heading 05 - Producer gas or water gas generators, with or without their
purifiers; acetylene gas generators and similar water process gas
generators, with or without their purifiers.
heading 06 - Steam turbines and other vapour turbines.
heading 07 - Spark-ignition reciprocating or rotary internal combustion
piston engines.
heading 08 - Compression-ignition internal combustion piston engines (diesel
or semi-diesel engines).
heading 09 - Parts suitable for use solely or principally with the engines of
heading 84.07 or 84.08.
heading 10 - Hydraulic turbines, water wheels, and regulators therefor.
heading 11 - Turbo -jets, turbo -propellers and other gas turbines.
heading 12 - Othe r engines and motors.
heading 13 - Pumps for liquids, whether or not fitted with a measuring device;
liquid elevators.
heading 14 - Air or vacuum pumps, air or other gas compressors and fans;
ventilating or recycling hoods incorporating a fan, whether or not
fitted with filters; gas-tight biological safety cabinets, whether
or not fitted with filters.
heading 15 - Air conditioning machines, comprising a motor-driven fan and
elements for changing the temperature and humidity, including
those machines in which the humidity cannot be separately
regulated.
heading 16 - Furnace burners for liquid fuel, for pulverised solid fuel or for
gas; mechanical stokers, including their mechanical grates,
mechanical ash dischargers and similar appliances.
heading 17 - Industrial or laboratory furnaces and ovens, including
incinerators, non-electric.
heading 18 - Refrigerators, freezers and other refrigerating or freezing
equipment, electric or other; heat pumps other than air
conditioning machines of heading 84.15.
heading 19 - Machinery, plant or laboratory equipment, whether or not
electrically heated (excluding furnaces, ovens and other
equipment of heading 85.14), for the treatment of materials by a
process involving a change of temperature such as heating,
cooking, roasting, distilling, rectifying, sterilising, pasteurising,
steaming, drying, evaporating, vaporising, condensing or cooling,
other than machinery or plant of a kind used for domestic
purposes; instantaneous or storage water heaters, non-electric.
heading 20 - Calendering or other rolling machines, other than for metals or
glass, and cylinders therefor.
heading 21 - Centrifuges, including centrifugal dryers; filtering or purifying
machinery and apparatus, for liquids or gases.
heading 22 - Dish washing machines; machinery for cleaning or drying bottles
or other containers; machinery for filling, closing, sealing or
labelling bottles, cans, boxes, bags or other containers; machinery
for capsuling bottles, jars, tubes and similar containers; other
packing or wrapping machinery (including heat-shrink wrapping
machinery); machinery for aerating beverages.
heading 23 - Weighing machinery (excluding balances of a sensitivity of 5 cg
or better), including weight operated counting or checking
machines; weighing machine weights of all kinds.
heading 24 - Mechanical appliances (whether or not hand-operated) for
projecting, dispersing or spraying liquids or powders; fire
extinguishers, whether or not charged; spray guns and similar
appliances; steam or sand blasting machines and similar jet
projecting machines.
heading 25 - Pulley tackle and hoists other than skip hoists; winches and
capstans; jacks.
heading 26 - Ships' derricks; cranes, including cable cranes; mobile lifting
frames, straddle carriers and works trucks fitted with a crane.
heading 27 - Fork-lift trucks; other works trucks fitted with lifting or handling
equipment.
heading 28 - Other lifting, handling, loading or unloading machinery (for
example, lifts, escalators, conveyors, teleferics).
heading 29 - Self-propelled bulldozers, angledozers, graders, levellers,
scrapers, mechanical shovels, excavators, shovel loaders, tamping
machines and road rollers.
heading 30 - Other moving, grading, levelling, scraping, excavating, tamping,
compacting, extracting or boring machinery, for earth, minerals
or ores; pile-drivers and pile-extractors; snow-ploughs and snow-
blowers.
heading 31 - Parts suitable for use solely or principally with the machinery of
headings 84.25 to 84.30.
heading 32 - Agricultural, horticultural or forestry machinery for soil
preparation or cultivation; lawn or sports-ground rollers.
heading 33 - Harvesting or threshing machinery, including straw or fodder
balers; grass or hay mowers; machines for cleaning, sorting or
grading eggs, fruit or other agricultural produce, other than
machinery of heading 84.37.
heading 34 - Milking machines and dairy ma chinery.
heading 35 - Presses, crushers and similar machinery used in the manufacture
of wine, cider, fruit juices or similar beverages.
heading 36 - Other agricultural, horticultural, forestry, poultry-keeping or
bee-keeping machinery, including germination plant fitted with
mechanical or thermal equipment; poultry incubators and
brooders.
heading 37 - Machines for cleaning, sorting or grading seed, grain or dried
leguminous vegetables; machinery used in the milling industry or
for the working of cereals or dried leguminous vegetables, other
than farm-type machinery.
heading 38 - Machinery, not specified or included elsewhere in this Chapter,
for the industrial preparation or manufacture of food or drink,
other than machinery for the extraction or preparation of
animal or fixed vegetable or microbial fats or oils.
heading 39 - Machinery for making pulp of fibrous cellulosic material or for
making or finishing paper or paperboard.
heading 40 - Book -binding machinery, including book -sewing machines.
heading 41 - Other machinery for making up paper pulp, paper or
paperboard, including cutting machines of all kinds.
heading 42 - Machinery, apparatus and equipment (other than the machines
of headings 84.56 to 84.65) for preparing or making plates,
cylinders or other printing components; plates, cylinders and
other printing components; plates, cylinders and lithographic
stones, prepared for printing purposes (for example, planed,
grained or polished).
heading 43 - Printing machinery used for printing by means of plates,
cylinders and other printing components of heading 84.42;
other printers, copying machines and facsimile machines,
whether or not combined; parts and accessories thereof.
heading 44 - Machines for extruding, drawing, texturing or cutting man-
made textile materials.
heading 45 - Machines for preparing textile fibres; spinning, doubling or
twisting machines and other machinery for producing textile
yarns; textile reeling or winding (including weft-winding)
machines and machines for preparing textile yarns for use on
the machines of heading 84.46 or 84.47.
heading 46 - Weaving machines (looms).
heading 47 - Knitting machines, stitch-bonding machines and machines for
making gimped yarn, tulle, lace, embroidery, trimmings, braid
or net and machines for tufting.
heading 48 - Auxiliary machinery for use with machines of heading 84.44,
84.45, 84.46 or 84.47 (for example, dobbies, Jacquards,
automatic stop motions, shuttle changing mechanisms); parts
and accessories suitable for use solely or principally with the
machines of this heading or of heading 84.44, 84.45, 84.46 or
84.47 (for example, spindles and spindle flyers, card clothing,
combs, extruding nipples, shuttles, healds and heald-frames,
hosiery needles).
heading 49 - Machinery for the manufacture or finishing of felt or
nonwovens in the piece or in shapes, including machinery for
making felt hats; blocks for making hats.
heading 50 - Household or laundry-type washing machines, including
machines which both wash and dry.
heading 51 - Machinery (other than machines of heading 84.50) for washing,
cleaning, wringing, drying, ironing, pressing (including fusing
presses), bleaching, dyeing, dressing, finishing, coating or
impregnating textile yarns, fabrics or made up textile articles
and machines for applying the paste to the base fabric or other
support used in the manufacture of floor coverings such as
linoleum; machines for reeling, unreeling, folding, cutting or
pinking textile fabrics.
heading 52 - Sewing machines, other than book-sewing machines of
heading 84.40; furniture, bases and covers specially designed
for sewing machines; sewing machine needles.
heading 53 - Machinery for preparing, tanning or working hides, skins or
leather or for making or repairing footwear or other articles of
hides, skins or leather, other than sewing machines.
heading 54 - Converters, ladles, ingot moulds and casting machines, of a kind
used in metallurgy or in metal foundries.
heading 55 - Metal -rolling mills and rolls therefor.
heading 56 - Machine-tools for working any material by removal of material,
by laser or other light or photon beam, ultrasonic, electro-
discharge, electro-chemical, electron beam, ionic-beam or
plasma arc processes; water-jet cutting machines.
heading 57 - Machining centres, unit construction machines (single station)
and multi-station transfer machines, for working metal.
heading 58 - Lathes (including turning centres) for removing metal.
heading 59 - Machine-tools (including way-type unit head machines) for
drilling, boring, milling, threading or tapping by removing
metal, other than lathes (including turning centres) of
heading 84.58.
heading 60 - Machine-tools for deburring, sharpening, grinding, honing,
lapping, polishing or otherwise finishing metal or cermets by
means of grinding stones, abrasives or polishing products, other
than gear cutting, gear grinding or gear finishing machines of
heading 84.61.
heading 61 - Machine-tools for planing, shaping, slotting, broaching, gear
cutting, gear grinding or gear finishing, sawing, cutting-off and
other machine-tools working by removing metal or cermets, not
elsewhere specified or included.
heading 62 - Machine-tools (including presses) for working metal by forging,
hammering or die forging (excluding rolling mills);
machine-tools (including presses, slitting lines and cut-to-length
lines) for working metal by bending, folding, straightening,
flattening, shearing, punching, notching or nibbling (excluding
draw-benches); presses for working metal or metal carbides,
not specified above.
heading 63 - Other machine-tools for working metal or cermets, without
removing material.
heading 64 - Machine-tools for working stone, ceramics, concrete, asbestos-
cement or like mineral materials or for cold working glass
heading 65 - Machine-tools (including machines for nailing, stapling, glueing
or otherwise assembling) for working wood, cork, bone, hard
rubber, hard plastics or similar hard materials.
heading 66 - Parts and accessories suitable for use solely or principally with
the machines of headings 84.56 to 84.65, including work or tool
holders, self-opening dieheads, dividing heads and other special
attachments for the machines; tool holders for any type of tool
for working in the hand.
heading 67 - Tools for working in the hand, pneumatic, hydraulic or with
self-contained electric or non-electric motor.
heading 68 - Machinery and apparatus for soldering, brazing or welding,
whether or not capable of cutting, other than those of
heading 85.15; gas-operated surface tempering machines and
appliances.
heading 70 - Calculating machines and pocket-size data recording,
reproducing and displaying machines with calculating
functions; accounting machines, postage-franking machines,
ticket-issuing machines and similar machines, incorporating a
calculating device; cash registers.
heading 71 - Automatic data processing machines and units thereof;
magnetic or optical readers, machines for transcribing data
onto data media in coded form and machines for processing
such data, not elsewhere specified or included.
heading 72 - Other office machines (for example, hectograph or stencil
duplicating machines, addressing machines, automatic
banknote dispensers, coin-sorting machines, coin-counting or
wrapping machines, pencil-sharpening machines, perforating or
stapling machines).
heading 73 - Parts and accessories (other than covers, carrying cases and the
like) suitable for use solely or principally with machines of
headings 84.70 to 84.72.
heading 74 - Machinery for sorting, screening, separating, washing,
crushing, grinding, mixing or kneading earth, stone, ores or
other mineral substances, in solid (including powder or paste)
form; machinery for agglomerating, shaping or moulding solid
mineral fuels, ceramic paste, unhardened cements, plastering
materials or other mineral products in powder or paste form;
machines for forming foundry moulds of sand.
heading 75 - Machines for assembling electric or electronic lamps, tubes or
valves or flashbulbs, in glass envelopes; machines for
manufacturing or hot working glass or glassware.
heading 76 - Automatic goods-vending machines (for example, postage
stamp, cigarette, food or beverage machines), including money-
changing machines.
heading 77 - Machinery for working rubber or plastics or for the
manufacture of products from these materials, not specified or
included elsewhere in this Chapter.
heading 78 - Machinery for preparing or making up tobacco, not specified or
included elsewhere in this Chapter.
heading 79 - Machines and mechanical appliances having individual
functions, not specified or included elsewhere in this Chapter.
heading 80 - Moulding boxes for metal foundry; mould bases; moulding
patterns; moulds for metal (other than ingot moulds), metal
carbides, glass, mineral materials, rubber or plastics.
heading 81 - Taps, cocks, valves and similar appliances for pipes, boiler
shells, tanks, vats or the like, including pressure-reducing valves
and thermostatically controlled valves.
heading 82 - Ball or roller bearings.
heading 83 - Transmission shafts (including cam shafts and crank shafts)
and cranks; bearing housings and plain shaft bearings; gears
and gearing; ball or roller screws; gear boxes and other speed
changers, including torque converters; flywheels and pulleys,
including pulley blocks; clutches and shaft couplings (including
universal joints).
heading 84 - Gaskets and similar joints of metal sheeting combined with
other material or of two or more layers of metal; sets or
assortments of gaskets and similar joints, dissimilar in
composition, put up in pouches, envelopes or similar packings;
mechanical seals.
heading 85 - Mac hines for additive manufacturing.
heading 86 - Machines and apparatus of a kind used solely or principally for
the manufacture of semiconductor boules or wafers,
semiconductor devices, electronic integrated circuits or flat
panel displays; machines and apparatus specified in Note 11 (C)
to this Chapter; parts and accessories.
heading 87 - Machinery parts, not containing electrical connectors,
insulators, coils, contacts or other electrical features, not
specified or included elsewhere in this Chapter. | {"heading_id": "50"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: lamb skin belt
These are the possible headings: heading 01 - Raw hides and skins of bovine (including buffalo) or equine
animals (fresh, or salted, dried, limed, pickled or otherwise
preserved, but not tanned, parchment-dressed or further
prepared), whether or not dehaired or split.
heading 02 - Raw skins of sheep or lambs (fresh, or salted, dried, limed,
pickled or otherwise preserved, but not tanned, parchment-
dressed or further prepared), whether or not with wool on or
split, other than those excluded by Note 1 (c) to this Chapter.
heading 03 - Other raw hides and skins (fresh, or salted, dried, limed, pickled
or otherwise preserved, but not tanned, parchment-dressed or
further prepared), whether or not dehaired or split, other than
those excluded by Note 1 (b) or 1 (c) to this Chapter.
heading 04 - Tanned or crust hides and skins of bovine (including buffalo) or
equine animals, without hair on, whether or not split, but not
further prepared.
heading 05 - Tanned or crust skins of sheep or lambs, without wool on,
whether or not split, but not further prepared.
heading 06 - Tanned or crust hides and skins of other animals, without wool
or hair on, whether or not split, but not further prepared.
heading 07 - Leather further prepared after tanning or crusting, including
parchment-dressed leather, of bovine (including buffalo) or
equine animals, without hair on, whether or not split, other
than leather of heading 41.14.
heading 12 - Leather further prepared after tanning or crusting, including
parchment-dressed leather, of sheep or lamb, without wool on,
whether or not split, other than leather of heading 41.14.
heading 13 - Leather further prepared after tanning or crusting, including
parchment-dressed leather, of other animals, without wool or
hair on, whether or not split, other than leather of
heading 41.14.
heading 14 - Chamois (including combination chamois) leather; patent
leather and patent laminated leather; metallised leather.
heading 15 - Composition leather with a basis of leather or leather fibre, in
slabs, sheets or strip, whether or not in rolls; parings and other
waste of leather or of composition leather, not suitable for the
manufacture of leather articles; leather dust, powder and flour. | {"heading_id": "12"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: hydraulic saw
These are the possible headings: heading 01 - Nuclear reactors; fuel elements (cartridges), non-irradiated, for
nuclear reactors; machinery and apparatus for isotopic
separation.
heading 02 - Steam or other vapour generating boilers (other than central
heating hot water boilers capable also of producing low pressure
steam); super-heated water boilers.
heading 03 - Central heating boilers other than those of heading 84.02.
heading 04 - Auxiliary plant for use with boilers of heading 84.02 or 84.03 (for
example, economisers, super-heaters, soot removers, gas
recoverers); condensers for steam or other vapour power units.
heading 05 - Producer gas or water gas generators, with or without their
purifiers; acetylene gas generators and similar water process gas
generators, with or without their purifiers.
heading 06 - Steam turbines and other vapour turbines.
heading 07 - Spark-ignition reciprocating or rotary internal combustion
piston engines.
heading 08 - Compression-ignition internal combustion piston engines (diesel
or semi-diesel engines).
heading 09 - Parts suitable for use solely or principally with the engines of
heading 84.07 or 84.08.
heading 10 - Hydraulic turbines, water wheels, and regulators therefor.
heading 11 - Turbo -jets, turbo -propellers and other gas turbines.
heading 12 - Othe r engines and motors.
heading 13 - Pumps for liquids, whether or not fitted with a measuring device;
liquid elevators.
heading 14 - Air or vacuum pumps, air or other gas compressors and fans;
ventilating or recycling hoods incorporating a fan, whether or not
fitted with filters; gas-tight biological safety cabinets, whether
or not fitted with filters.
heading 15 - Air conditioning machines, comprising a motor-driven fan and
elements for changing the temperature and humidity, including
those machines in which the humidity cannot be separately
regulated.
heading 16 - Furnace burners for liquid fuel, for pulverised solid fuel or for
gas; mechanical stokers, including their mechanical grates,
mechanical ash dischargers and similar appliances.
heading 17 - Industrial or laboratory furnaces and ovens, including
incinerators, non-electric.
heading 18 - Refrigerators, freezers and other refrigerating or freezing
equipment, electric or other; heat pumps other than air
conditioning machines of heading 84.15.
heading 19 - Machinery, plant or laboratory equipment, whether or not
electrically heated (excluding furnaces, ovens and other
equipment of heading 85.14), for the treatment of materials by a
process involving a change of temperature such as heating,
cooking, roasting, distilling, rectifying, sterilising, pasteurising,
steaming, drying, evaporating, vaporising, condensing or cooling,
other than machinery or plant of a kind used for domestic
purposes; instantaneous or storage water heaters, non-electric.
heading 20 - Calendering or other rolling machines, other than for metals or
glass, and cylinders therefor.
heading 21 - Centrifuges, including centrifugal dryers; filtering or purifying
machinery and apparatus, for liquids or gases.
heading 22 - Dish washing machines; machinery for cleaning or drying bottles
or other containers; machinery for filling, closing, sealing or
labelling bottles, cans, boxes, bags or other containers; machinery
for capsuling bottles, jars, tubes and similar containers; other
packing or wrapping machinery (including heat-shrink wrapping
machinery); machinery for aerating beverages.
heading 23 - Weighing machinery (excluding balances of a sensitivity of 5 cg
or better), including weight operated counting or checking
machines; weighing machine weights of all kinds.
heading 24 - Mechanical appliances (whether or not hand-operated) for
projecting, dispersing or spraying liquids or powders; fire
extinguishers, whether or not charged; spray guns and similar
appliances; steam or sand blasting machines and similar jet
projecting machines.
heading 25 - Pulley tackle and hoists other than skip hoists; winches and
capstans; jacks.
heading 26 - Ships' derricks; cranes, including cable cranes; mobile lifting
frames, straddle carriers and works trucks fitted with a crane.
heading 27 - Fork-lift trucks; other works trucks fitted with lifting or handling
equipment.
heading 28 - Other lifting, handling, loading or unloading machinery (for
example, lifts, escalators, conveyors, teleferics).
heading 29 - Self-propelled bulldozers, angledozers, graders, levellers,
scrapers, mechanical shovels, excavators, shovel loaders, tamping
machines and road rollers.
heading 30 - Other moving, grading, levelling, scraping, excavating, tamping,
compacting, extracting or boring machinery, for earth, minerals
or ores; pile-drivers and pile-extractors; snow-ploughs and snow-
blowers.
heading 31 - Parts suitable for use solely or principally with the machinery of
headings 84.25 to 84.30.
heading 32 - Agricultural, horticultural or forestry machinery for soil
preparation or cultivation; lawn or sports-ground rollers.
heading 33 - Harvesting or threshing machinery, including straw or fodder
balers; grass or hay mowers; machines for cleaning, sorting or
grading eggs, fruit or other agricultural produce, other than
machinery of heading 84.37.
heading 34 - Milking machines and dairy ma chinery.
heading 35 - Presses, crushers and similar machinery used in the manufacture
of wine, cider, fruit juices or similar beverages.
heading 36 - Other agricultural, horticultural, forestry, poultry-keeping or
bee-keeping machinery, including germination plant fitted with
mechanical or thermal equipment; poultry incubators and
brooders.
heading 37 - Machines for cleaning, sorting or grading seed, grain or dried
leguminous vegetables; machinery used in the milling industry or
for the working of cereals or dried leguminous vegetables, other
than farm-type machinery.
heading 38 - Machinery, not specified or included elsewhere in this Chapter,
for the industrial preparation or manufacture of food or drink,
other than machinery for the extraction or preparation of
animal or fixed vegetable or microbial fats or oils.
heading 39 - Machinery for making pulp of fibrous cellulosic material or for
making or finishing paper or paperboard.
heading 40 - Book -binding machinery, including book -sewing machines.
heading 41 - Other machinery for making up paper pulp, paper or
paperboard, including cutting machines of all kinds.
heading 42 - Machinery, apparatus and equipment (other than the machines
of headings 84.56 to 84.65) for preparing or making plates,
cylinders or other printing components; plates, cylinders and
other printing components; plates, cylinders and lithographic
stones, prepared for printing purposes (for example, planed,
grained or polished).
heading 43 - Printing machinery used for printing by means of plates,
cylinders and other printing components of heading 84.42;
other printers, copying machines and facsimile machines,
whether or not combined; parts and accessories thereof.
heading 44 - Machines for extruding, drawing, texturing or cutting man-
made textile materials.
heading 45 - Machines for preparing textile fibres; spinning, doubling or
twisting machines and other machinery for producing textile
yarns; textile reeling or winding (including weft-winding)
machines and machines for preparing textile yarns for use on
the machines of heading 84.46 or 84.47.
heading 46 - Weaving machines (looms).
heading 47 - Knitting machines, stitch-bonding machines and machines for
making gimped yarn, tulle, lace, embroidery, trimmings, braid
or net and machines for tufting.
heading 48 - Auxiliary machinery for use with machines of heading 84.44,
84.45, 84.46 or 84.47 (for example, dobbies, Jacquards,
automatic stop motions, shuttle changing mechanisms); parts
and accessories suitable for use solely or principally with the
machines of this heading or of heading 84.44, 84.45, 84.46 or
84.47 (for example, spindles and spindle flyers, card clothing,
combs, extruding nipples, shuttles, healds and heald-frames,
hosiery needles).
heading 49 - Machinery for the manufacture or finishing of felt or
nonwovens in the piece or in shapes, including machinery for
making felt hats; blocks for making hats.
heading 50 - Household or laundry-type washing machines, including
machines which both wash and dry.
heading 51 - Machinery (other than machines of heading 84.50) for washing,
cleaning, wringing, drying, ironing, pressing (including fusing
presses), bleaching, dyeing, dressing, finishing, coating or
impregnating textile yarns, fabrics or made up textile articles
and machines for applying the paste to the base fabric or other
support used in the manufacture of floor coverings such as
linoleum; machines for reeling, unreeling, folding, cutting or
pinking textile fabrics.
heading 52 - Sewing machines, other than book-sewing machines of
heading 84.40; furniture, bases and covers specially designed
for sewing machines; sewing machine needles.
heading 53 - Machinery for preparing, tanning or working hides, skins or
leather or for making or repairing footwear or other articles of
hides, skins or leather, other than sewing machines.
heading 54 - Converters, ladles, ingot moulds and casting machines, of a kind
used in metallurgy or in metal foundries.
heading 55 - Metal -rolling mills and rolls therefor.
heading 56 - Machine-tools for working any material by removal of material,
by laser or other light or photon beam, ultrasonic, electro-
discharge, electro-chemical, electron beam, ionic-beam or
plasma arc processes; water-jet cutting machines.
heading 57 - Machining centres, unit construction machines (single station)
and multi-station transfer machines, for working metal.
heading 58 - Lathes (including turning centres) for removing metal.
heading 59 - Machine-tools (including way-type unit head machines) for
drilling, boring, milling, threading or tapping by removing
metal, other than lathes (including turning centres) of
heading 84.58.
heading 60 - Machine-tools for deburring, sharpening, grinding, honing,
lapping, polishing or otherwise finishing metal or cermets by
means of grinding stones, abrasives or polishing products, other
than gear cutting, gear grinding or gear finishing machines of
heading 84.61.
heading 61 - Machine-tools for planing, shaping, slotting, broaching, gear
cutting, gear grinding or gear finishing, sawing, cutting-off and
other machine-tools working by removing metal or cermets, not
elsewhere specified or included.
heading 62 - Machine-tools (including presses) for working metal by forging,
hammering or die forging (excluding rolling mills);
machine-tools (including presses, slitting lines and cut-to-length
lines) for working metal by bending, folding, straightening,
flattening, shearing, punching, notching or nibbling (excluding
draw-benches); presses for working metal or metal carbides,
not specified above.
heading 63 - Other machine-tools for working metal or cermets, without
removing material.
heading 64 - Machine-tools for working stone, ceramics, concrete, asbestos-
cement or like mineral materials or for cold working glass
heading 65 - Machine-tools (including machines for nailing, stapling, glueing
or otherwise assembling) for working wood, cork, bone, hard
rubber, hard plastics or similar hard materials.
heading 66 - Parts and accessories suitable for use solely or principally with
the machines of headings 84.56 to 84.65, including work or tool
holders, self-opening dieheads, dividing heads and other special
attachments for the machines; tool holders for any type of tool
for working in the hand.
heading 67 - Tools for working in the hand, pneumatic, hydraulic or with
self-contained electric or non-electric motor.
heading 68 - Machinery and apparatus for soldering, brazing or welding,
whether or not capable of cutting, other than those of
heading 85.15; gas-operated surface tempering machines and
appliances.
heading 70 - Calculating machines and pocket-size data recording,
reproducing and displaying machines with calculating
functions; accounting machines, postage-franking machines,
ticket-issuing machines and similar machines, incorporating a
calculating device; cash registers.
heading 71 - Automatic data processing machines and units thereof;
magnetic or optical readers, machines for transcribing data
onto data media in coded form and machines for processing
such data, not elsewhere specified or included.
heading 72 - Other office machines (for example, hectograph or stencil
duplicating machines, addressing machines, automatic
banknote dispensers, coin-sorting machines, coin-counting or
wrapping machines, pencil-sharpening machines, perforating or
stapling machines).
heading 73 - Parts and accessories (other than covers, carrying cases and the
like) suitable for use solely or principally with machines of
headings 84.70 to 84.72.
heading 74 - Machinery for sorting, screening, separating, washing,
crushing, grinding, mixing or kneading earth, stone, ores or
other mineral substances, in solid (including powder or paste)
form; machinery for agglomerating, shaping or moulding solid
mineral fuels, ceramic paste, unhardened cements, plastering
materials or other mineral products in powder or paste form;
machines for forming foundry moulds of sand.
heading 75 - Machines for assembling electric or electronic lamps, tubes or
valves or flashbulbs, in glass envelopes; machines for
manufacturing or hot working glass or glassware.
heading 76 - Automatic goods-vending machines (for example, postage
stamp, cigarette, food or beverage machines), including money-
changing machines.
heading 77 - Machinery for working rubber or plastics or for the
manufacture of products from these materials, not specified or
included elsewhere in this Chapter.
heading 78 - Machinery for preparing or making up tobacco, not specified or
included elsewhere in this Chapter.
heading 79 - Machines and mechanical appliances having individual
functions, not specified or included elsewhere in this Chapter.
heading 80 - Moulding boxes for metal foundry; mould bases; moulding
patterns; moulds for metal (other than ingot moulds), metal
carbides, glass, mineral materials, rubber or plastics.
heading 81 - Taps, cocks, valves and similar appliances for pipes, boiler
shells, tanks, vats or the like, including pressure-reducing valves
and thermostatically controlled valves.
heading 82 - Ball or roller bearings.
heading 83 - Transmission shafts (including cam shafts and crank shafts)
and cranks; bearing housings and plain shaft bearings; gears
and gearing; ball or roller screws; gear boxes and other speed
changers, including torque converters; flywheels and pulleys,
including pulley blocks; clutches and shaft couplings (including
universal joints).
heading 84 - Gaskets and similar joints of metal sheeting combined with
other material or of two or more layers of metal; sets or
assortments of gaskets and similar joints, dissimilar in
composition, put up in pouches, envelopes or similar packings;
mechanical seals.
heading 85 - Mac hines for additive manufacturing.
heading 86 - Machines and apparatus of a kind used solely or principally for
the manufacture of semiconductor boules or wafers,
semiconductor devices, electronic integrated circuits or flat
panel displays; machines and apparatus specified in Note 11 (C)
to this Chapter; parts and accessories.
heading 87 - Machinery parts, not containing electrical connectors,
insulators, coils, contacts or other electrical features, not
specified or included elsewhere in this Chapter. | {"heading_id": "67"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: vegtable saps
These are the possible headings: heading 01 - Lac; natural gums, resins, gum-resins and oleoresins (for
example, balsams).
heading 02 - Veget able saps and extracts; pectic substances, pectinates and
pectates; agar -agar and other mucilages and thickeners, whether
or not modified, derived from vegetable pr oducts . | {"heading_id": "02"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: manmade fibers bulk
These are the possible headings: heading 01 - Synthetic filament tow.
heading 02 - Artificial filament tow.
heading 03 - Synthetic staple fibres, not carded, combed or otherwise
processed for spinning.
heading 04 - Artificial staple fibres, not carded, combed or otherwise
processed for spinning.
heading 05 - Waste (including noils, yarn waste and garnetted stock) of man -made fibres
heading 06 - Synthetic staple fibres, carded, combed or otherwise processed
for spinning.
heading 07 - Artificial staple fibres, carded, combed or otherwise processed
for spinning.
heading 08 - Sewing thread of man-made staple fibres, whether or not put up
for retail sale.
heading 09 - Yarn (other than sewing thread) of synthetic staple fibres, not
put up for retail sale.
heading 10 - Yarn (other than sewing thread) of artificial staple fibres, not put
up for retail sale.
heading 11 - Yarn (other than sewing thread) of man-made staple fibres, put
up for retail sale.
heading 12 - Woven fabrics of synthetic staple fibres, containing 85 % or more
by weight of synthetic staple fibres.
heading 13 - Woven fabrics of synthetic staple fibres, containing less than
85 % by weight of such fibres, mixed mainly or solely with
cotton, of a weight not exceeding 170 g/m².
heading 14 - Woven fabrics of synthetic staple fibres, containing less than
85 % by weight of such fibres, mixed mainly or solely with
cotton, of a weight exceeding 170 g/m².
heading 15 - Other woven fabrics of synthetic staple fibres.
heading 16 - Woven fabrics of artificial staple fibres. | {"heading_id": "01"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: broken oil seeds
These are the possible headings: heading 01 - Soya beans, whether or not broken .
heading 02 - Ground-nuts, not roasted or otherwise cooked, whether or not
shelled or broken.
heading 03 - Copra.
heading 04 - Linseed, whether or not broken.
heading 05 - Rape or colza seeds, whether or not broken .
heading 07 - Other oil seeds and oleaginous fruits, whether or not broken .
heading 08 - Flours and meals of oil seeds or oleaginous fruits, other than
those of mustard.
heading 09 - Seeds, fruit and spores, of a kind used for sowing .
heading 10 - Hop cones, fresh or dried, whether or not ground, powdered or
in the form of pellets; lupulin.
- Hop cones, neither ground nor p
heading 11 - Plants and parts of plants (including seeds and fruits), of a kind
used primarily in perfumery, in pharmacy or for insecticidal,
fungicidal or similar purposes, fresh, chilled, frozen or dried,
whether or not cut, crushed or powdered.
heading 12 - Locust beans, seaweeds and other algae, sugar beet and sugar
cane, fresh, chilled, frozen or dried, whether or not ground; fruit
stones and kernels and other vegetable products (including
unroasted chicory roots of the variety Cichorium intybus sativum)
of a kind used primarily for human consumption, not elsewhere
specified or included.
heading 13 - Cereal straw and husks, unprepared, whether or not chopped,
ground, pressed or in the form of pellets.
heading 14 - Swedes, mangolds, fodder roots, hay, lucerne (alfalfa), clover,
sainfoin, forage kale, lupines, vetches and similar forage
products, whether or not in the form of pellets. | {"heading_id": "07"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: dining chair set
These are the possible headings: heading 01 - Seats (other than those of heading 94.02), whether or not
convertible into beds, and parts thereof.
heading 02 - Medical, surgical, dental or veterinary furniture (for example,
operating tables, examination tables, hospital beds with
mechanical fittings, dentists' chairs); barbers' chairs and similar
chairs, having rotating as well as both reclining and elevating
movements; parts of the foregoing articles.
heading 03 - Other furniture and parts thereof.
heading 04 - Mattress supports; articles of bedding and similar furnishing (for
example, mattresses, quilts, eiderdowns, cushions, pouffes and
pillows) fitted with springs or stuffed or internally fitted with any
material or of cellular rubber or plastics, whether or not covered.
heading 05 - Luminaires and lighting fittings including searchlights and
spotlights and parts thereof, not elsewhere specified or included;
illuminated signs, illuminated name-plates and the like, having a
permanently fixed light source, and parts thereof not elsewhere
specified or included.
heading 06 - Prefabricated buildings. | {"heading_id": "01"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: egg carton pulp
These are the possible headings: heading 01 - Newsprint, in rolls or sheets.
heading 02 - Uncoated paper and paperboard, of a kind used for writing,
printing or other graphic purposes, and non perforated punch-
cards and punch tape paper, in rolls or rectangular (including
square) sheets, of any size, other than paper of heading 48.01 or
48.03; hand-made paper and paperboard.
heading 03 - Toilet or facial tissue stock, towel or napkin stock and similar
paper of a kind used for household or sanitary purposes, cellulose
wadding and webs of cellulose fibres, whether or not creped,
crinkled, embossed, perforated, surface-coloured, surface-
decorated or printed, in rolls or sheets.
heading 04 - Uncoated kraft paper and paperboard, in rolls or sheets, other
than that of heading 48.02 or 48.03.
heading 05 - Other uncoated paper and paperboard, in rolls or sheets, not
further worked or processed than as specified in Note 3 to this
Chapter.
heading 06 - Vegetable parchment, greaseproof papers, tracing papers and
glassine and other glazed transparent or translucent papers, in
rolls or sheets.
heading 07 - Composite paper and paperboard (made by sticking flat layers
of paper or paperboard together with an adhesive), not surface-
coated or impregnated, whether or not internally reinforced, in
rolls or sheets.
heading 08 - Paper and paperboard, corrugated (with or without glued flat
surface sheets), creped, crinkled, embossed or perforated, in rolls
or sheets, other than paper of the kind described in
heading 48.03.
heading 09 - Carbon paper, self-copy paper and other copying or transfer
papers (including coated or impregnated paper for duplicator
stencils or offset plates), whether or not printed, in rolls or sheets.
heading 10 - Paper and paperboard, coated on one or both sides with kaolin
(China clay) or other inorganic substances, with or without a
binder, and with no other coating, whether or not surface-
coloured, surface-decorated or printed, in rolls or rectangular
(including square) sheets, of any size.
heading 11 - Paper, paperboard, cellulose wadding and webs of cellulose
fibres, coated, impregnated, covered, surface-coloured, surface-
decorated or printed, in rolls or rectangular (including square)
sheets, of any size, other than goods of the kind described in
heading 48.03, 48.09 or 48.10.
heading 12 - Filter blocks, slabs and plates, of paper pulp.
heading 13 - Cigarette paper, whether or not cut to size or in the form of
booklets or tubes.
heading 14 - Wallpaper and similar wall coverings; window transparencies of
paper.
heading 16 - Carbon paper, self-copy paper and other copying or transfer
papers (other than those of heading 48.09), duplicator stencils
and offset plates, of paper, whether or not put up in boxes.
heading 17 - Envelopes, letter cards, plain postcards and correspondence
cards, of paper or paperboard; boxes, pouches, wallets and
writing compendiums, of paper or paperboard, containing an
assortment of paper stationery.
heading 18 - Toilet paper and similar paper, cellulose wadding or webs of
cellulose fibres, of a kind used for household or sanitary
purposes, in rolls of a width not exceeding 36 cm, or cut to size or
shape; handkerchiefs, cleansing tissues, towels, tablecloths,
serviettes, bed sheets and similar household, sanitary or hospital
articles, articles of apparel and clothing accessories, of paper
pulp, paper, cellulose wadding or webs of cellulose fibres.
heading 19 - Cartons, boxes, cases, bags and other packing containers, of
paper, paperboard, cellulose wadding or webs of cellulose fibres;
box files, letter trays, and similar articles, of paper or paperboard
of a kind used in offices, shops or the like.
- Cartons, boxes and cases, of corrugated pape
heading 20 - Registers, account books, note books, order books, receipt books,
letter pads, memorandum pads, diaries and similar articles,
exercise books, blotting-pads, binders (loose-leaf or other),
folders, file covers, manifold business forms, interleaved carbon
sets and other articles of stationery, of paper or paperboard;
albums for samples or for collections and book covers, of paper
or paperboard.
heading 21 - Paper or paperboard labels of all kinds, whether or not printed.
heading 22 - Bobbins, spools, cops and similar supports of paper pulp, paper
or paperboard (whether or not perforated or hardened).
heading 23 - Other paper, paperboard, cellulose wadding and webs of
cellulose fibres, cut to size or shape; other articles of paper pulp,
paper, paperboard, cellulose wadding or webs of cellulose fibres. | {"heading_id": "23"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: citrus essential
These are the possible headings: heading 01 - Essential oils (terpeneless or not), including concretes and
absolutes; resinoids; extracted oleoresins; concentrates of
essential oils in fats, in fixed oils, in waxes or the like, obtained by
enfleurage or maceration; terpenic by-products of the
deterpenation of essential oils; aqueous distillates and aqueous
solutions of essential oils.
heading 02 - Mixtures of odoriferous substances and mixtures (including
alcoholic solutions) with a basis of one or more of these
substances, of a kind used as raw materials in industry; other
preparations based on odoriferous substances, of a kind used for
the manufacture of beverages.
heading 03 - Perfumes and toilet waters.
heading 04 - Beauty or make-up preparations and preparations for the care of
the skin (other than medicaments), including sunscreen or sun
tan preparations; manicure or pedicure preparations
heading 05 - Preparations for use on the hair.
heading 06 - Preparations for oral or dental hygiene, including denture
fixative pastes and powders; yarn used to clean between the teeth
(dental floss), in individual retail packages.
heading 07 - Pre-shave, shaving or after-shave preparations, personal
deodorants, bath preparations, depilatories and other perfumery,
cosmetic or toilet preparations, not elsewhere specified or
included; prepared room deodorisers, whether or not perfumed
or having disinfectant properties. | {"heading_id": "01"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: copper zinc sheet
These are the possible headings: heading 03 - Refined copper and copper alloys, unwrou ght.
heading 04 - Copper waste and scrap.
heading 05 - Master alloys of copper.
heading 06 - Copper powders and flakes.
heading 07 - Copper bars, rods and profiles.
heading 08 - Copper wire.
heading 09 - Copper plates, sheets and strip, of a thickness exceeding 0.15 mm.
heading 10 - Copper foil (whether or not printed or backed with paper,
paperboard, plastics or similar backing materials) of a thickness
(excluding any backing) not exceeding 0.15 mm.
heading 11 - Copper tubes and pipes.
heading 12 - Copper tube or pipe fittings (for example, couplings, elbows,
heading 13 - Stranded wire, cables, plaited bands and the like, of copper, not
electrically insulated.
heading 15 - Nails, tacks, drawing pins, staples (other than those of
heading 83.05) and similar articles, of copper or of iron or steel
with heads of copper; screws, bolts, nuts, screw hooks, rivets,
cotters, cotter-pins, washers (including spring washers) and
similar articles, of copper.
heading 18 - Table, kitchen or other household articles and parts thereof, of
copper; pot scourers and scouring or polishing pads, gloves and
the like, of copper; sanitary ware and parts thereof, of copper.
heading 19 - Other articles of copper. | {"heading_id": "09"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: decorative bedspread
These are the possible headings: heading 01 - Blankets and travelling rugs.
heading 02 - Bed linen, table linen, toilet linen and kitchen linen.
heading 03 - Curtains (including drapes) and interior blinds; curtain or bed
valances.
heading 04 - Other furnishing articles , excluding those o f heading 94.04.
heading 05 - Sacks and bags, of a kind used for the packing of goods.
heading 06 - Tarpaulins, awnings and sunblinds; tents (including temporary
canopies and similar articles); sails for boats, sailboards or
landcraft; camping goods.
heading 07 - Other ma de up articles, includin g dress patterns.
heading 08 - Sets consisting of woven fabric and yarn, whether or not with
accessories, for making up into rugs, tapestries, embroidered
table cloths or serviettes, or similar textile articles, put up in
packings for retail sale.
heading 09 - Worn clothing and other worn articles.
heading 10 - Used or new rags, scrap twine, cordage, rope and cables and
worn out articles of twine, cordage, rope or cables, of textile
materials. | {"heading_id": "04"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: m-xylene uses
These are the possible headings: heading 01 - Acyclic hydrocarbons .
heading 02 - Cyclic hydrocarbons .
heading 03 - Halogenated derivatives of hydrocarbons .
heading 04 - Sulphonated, nitrated or nitrosated derivatives of hydrocarbons,
heading 05 - Acyclic alcohols and their halogenated, sulphonated, nitrated or
heading 06 - Cyclic alcohols and their halogenated, sulphonated, nitrated or
heading 07 - Phenols; phenol -alcohols .
heading 08 - Halogenated, sulphonated, nitrated or nitrosated derivatives of
heading 09 - Ethers, ether -alcohols, ether -phenols, ether -alcohol -phenols,
heading 10 - Epoxides, epoxyalcohols, epoxyphenols and epoxyethers, with a
heading 12 - Aldehydes, whether or not with other oxygen function; cyclic
heading 15 - Saturated acyclic monocarboxylic acids and their anhydrides,
heading 16 - Unsaturated acyclic monocarboxylic acids, cyclic monocarboxylic
heading 17 - Polycarboxylic acids, their anhydrides, halides, peroxides and
heading 18 - Carboxylic acids with additional oxygen function and their
heading 19 - Phosphoric esters and their salts, including lactophosphates;
heading 20 - Esters of other inorganic acids of non -metals (excluding esters
heading 21 - Amine -function compounds.
heading 22 - Oxygen -function amino -compounds.
heading 23 - Quaternary ammonium salts and hydroxides; lecithins and
heading 24 - Carboxyamide -function compounds; amide -function compounds
heading 25 - Carboxyimide -function compounds (including saccharin and its
heading 26 - Nitrile -function compounds.
heading 30 - Organo -sulphur compounds.
heading 31 - Other organo -inorganic compounds .
heading 32 - Heterocyclic compounds with oxygen hetero -atom(s) only.
heading 33 - Heterocyclic compounds with nitrogen hetero -atom(s) only.
heading 34 - Nucleic acids and their salts, whether or not chemically defined;
heading 35 - Sulphonamides.
heading 36 - Provitamins and vitamins, natural or reproduced by synthesis
heading 37 - Hormones, prostaglandins, thromboxanes and leukotrienes,
heading 38 - Glycosides, natural or reproduced by synthesis, and their salts,
heading 39 - Alkaloids, natural or reproduced by synthesis, and their salts, | {"heading_id": "02"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: non electric boiler
These are the possible headings: heading 01 - Nuclear reactors; fuel elements (cartridges), non-irradiated, for
nuclear reactors; machinery and apparatus for isotopic
separation.
heading 02 - Steam or other vapour generating boilers (other than central
heating hot water boilers capable also of producing low pressure
steam); super-heated water boilers.
heading 03 - Central heating boilers other than those of heading 84.02.
heading 04 - Auxiliary plant for use with boilers of heading 84.02 or 84.03 (for
example, economisers, super-heaters, soot removers, gas
recoverers); condensers for steam or other vapour power units.
heading 05 - Producer gas or water gas generators, with or without their
purifiers; acetylene gas generators and similar water process gas
generators, with or without their purifiers.
heading 06 - Steam turbines and other vapour turbines.
heading 07 - Spark-ignition reciprocating or rotary internal combustion
piston engines.
heading 08 - Compression-ignition internal combustion piston engines (diesel
or semi-diesel engines).
heading 09 - Parts suitable for use solely or principally with the engines of
heading 84.07 or 84.08.
heading 10 - Hydraulic turbines, water wheels, and regulators therefor.
heading 11 - Turbo -jets, turbo -propellers and other gas turbines.
heading 12 - Othe r engines and motors.
heading 13 - Pumps for liquids, whether or not fitted with a measuring device;
liquid elevators.
heading 14 - Air or vacuum pumps, air or other gas compressors and fans;
ventilating or recycling hoods incorporating a fan, whether or not
fitted with filters; gas-tight biological safety cabinets, whether
or not fitted with filters.
heading 15 - Air conditioning machines, comprising a motor-driven fan and
elements for changing the temperature and humidity, including
those machines in which the humidity cannot be separately
regulated.
heading 16 - Furnace burners for liquid fuel, for pulverised solid fuel or for
gas; mechanical stokers, including their mechanical grates,
mechanical ash dischargers and similar appliances.
heading 17 - Industrial or laboratory furnaces and ovens, including
incinerators, non-electric.
heading 18 - Refrigerators, freezers and other refrigerating or freezing
equipment, electric or other; heat pumps other than air
conditioning machines of heading 84.15.
heading 19 - Machinery, plant or laboratory equipment, whether or not
electrically heated (excluding furnaces, ovens and other
equipment of heading 85.14), for the treatment of materials by a
process involving a change of temperature such as heating,
cooking, roasting, distilling, rectifying, sterilising, pasteurising,
steaming, drying, evaporating, vaporising, condensing or cooling,
other than machinery or plant of a kind used for domestic
purposes; instantaneous or storage water heaters, non-electric.
heading 20 - Calendering or other rolling machines, other than for metals or
glass, and cylinders therefor.
heading 21 - Centrifuges, including centrifugal dryers; filtering or purifying
machinery and apparatus, for liquids or gases.
heading 22 - Dish washing machines; machinery for cleaning or drying bottles
or other containers; machinery for filling, closing, sealing or
labelling bottles, cans, boxes, bags or other containers; machinery
for capsuling bottles, jars, tubes and similar containers; other
packing or wrapping machinery (including heat-shrink wrapping
machinery); machinery for aerating beverages.
heading 23 - Weighing machinery (excluding balances of a sensitivity of 5 cg
or better), including weight operated counting or checking
machines; weighing machine weights of all kinds.
heading 24 - Mechanical appliances (whether or not hand-operated) for
projecting, dispersing or spraying liquids or powders; fire
extinguishers, whether or not charged; spray guns and similar
appliances; steam or sand blasting machines and similar jet
projecting machines.
heading 25 - Pulley tackle and hoists other than skip hoists; winches and
capstans; jacks.
heading 26 - Ships' derricks; cranes, including cable cranes; mobile lifting
frames, straddle carriers and works trucks fitted with a crane.
heading 27 - Fork-lift trucks; other works trucks fitted with lifting or handling
equipment.
heading 28 - Other lifting, handling, loading or unloading machinery (for
example, lifts, escalators, conveyors, teleferics).
heading 29 - Self-propelled bulldozers, angledozers, graders, levellers,
scrapers, mechanical shovels, excavators, shovel loaders, tamping
machines and road rollers.
heading 30 - Other moving, grading, levelling, scraping, excavating, tamping,
compacting, extracting or boring machinery, for earth, minerals
or ores; pile-drivers and pile-extractors; snow-ploughs and snow-
blowers.
heading 31 - Parts suitable for use solely or principally with the machinery of
headings 84.25 to 84.30.
heading 32 - Agricultural, horticultural or forestry machinery for soil
preparation or cultivation; lawn or sports-ground rollers.
heading 33 - Harvesting or threshing machinery, including straw or fodder
balers; grass or hay mowers; machines for cleaning, sorting or
grading eggs, fruit or other agricultural produce, other than
machinery of heading 84.37.
heading 34 - Milking machines and dairy ma chinery.
heading 35 - Presses, crushers and similar machinery used in the manufacture
of wine, cider, fruit juices or similar beverages.
heading 36 - Other agricultural, horticultural, forestry, poultry-keeping or
bee-keeping machinery, including germination plant fitted with
mechanical or thermal equipment; poultry incubators and
brooders.
heading 37 - Machines for cleaning, sorting or grading seed, grain or dried
leguminous vegetables; machinery used in the milling industry or
for the working of cereals or dried leguminous vegetables, other
than farm-type machinery.
heading 38 - Machinery, not specified or included elsewhere in this Chapter,
for the industrial preparation or manufacture of food or drink,
other than machinery for the extraction or preparation of
animal or fixed vegetable or microbial fats or oils.
heading 39 - Machinery for making pulp of fibrous cellulosic material or for
making or finishing paper or paperboard.
heading 40 - Book -binding machinery, including book -sewing machines.
heading 41 - Other machinery for making up paper pulp, paper or
paperboard, including cutting machines of all kinds.
heading 42 - Machinery, apparatus and equipment (other than the machines
of headings 84.56 to 84.65) for preparing or making plates,
cylinders or other printing components; plates, cylinders and
other printing components; plates, cylinders and lithographic
stones, prepared for printing purposes (for example, planed,
grained or polished).
heading 43 - Printing machinery used for printing by means of plates,
cylinders and other printing components of heading 84.42;
other printers, copying machines and facsimile machines,
whether or not combined; parts and accessories thereof.
heading 44 - Machines for extruding, drawing, texturing or cutting man-
made textile materials.
heading 45 - Machines for preparing textile fibres; spinning, doubling or
twisting machines and other machinery for producing textile
yarns; textile reeling or winding (including weft-winding)
machines and machines for preparing textile yarns for use on
the machines of heading 84.46 or 84.47.
heading 46 - Weaving machines (looms).
heading 47 - Knitting machines, stitch-bonding machines and machines for
making gimped yarn, tulle, lace, embroidery, trimmings, braid
or net and machines for tufting.
heading 48 - Auxiliary machinery for use with machines of heading 84.44,
84.45, 84.46 or 84.47 (for example, dobbies, Jacquards,
automatic stop motions, shuttle changing mechanisms); parts
and accessories suitable for use solely or principally with the
machines of this heading or of heading 84.44, 84.45, 84.46 or
84.47 (for example, spindles and spindle flyers, card clothing,
combs, extruding nipples, shuttles, healds and heald-frames,
hosiery needles).
heading 49 - Machinery for the manufacture or finishing of felt or
nonwovens in the piece or in shapes, including machinery for
making felt hats; blocks for making hats.
heading 50 - Household or laundry-type washing machines, including
machines which both wash and dry.
heading 51 - Machinery (other than machines of heading 84.50) for washing,
cleaning, wringing, drying, ironing, pressing (including fusing
presses), bleaching, dyeing, dressing, finishing, coating or
impregnating textile yarns, fabrics or made up textile articles
and machines for applying the paste to the base fabric or other
support used in the manufacture of floor coverings such as
linoleum; machines for reeling, unreeling, folding, cutting or
pinking textile fabrics.
heading 52 - Sewing machines, other than book-sewing machines of
heading 84.40; furniture, bases and covers specially designed
for sewing machines; sewing machine needles.
heading 53 - Machinery for preparing, tanning or working hides, skins or
leather or for making or repairing footwear or other articles of
hides, skins or leather, other than sewing machines.
heading 54 - Converters, ladles, ingot moulds and casting machines, of a kind
used in metallurgy or in metal foundries.
heading 55 - Metal -rolling mills and rolls therefor.
heading 56 - Machine-tools for working any material by removal of material,
by laser or other light or photon beam, ultrasonic, electro-
discharge, electro-chemical, electron beam, ionic-beam or
plasma arc processes; water-jet cutting machines.
heading 57 - Machining centres, unit construction machines (single station)
and multi-station transfer machines, for working metal.
heading 58 - Lathes (including turning centres) for removing metal.
heading 59 - Machine-tools (including way-type unit head machines) for
drilling, boring, milling, threading or tapping by removing
metal, other than lathes (including turning centres) of
heading 84.58.
heading 60 - Machine-tools for deburring, sharpening, grinding, honing,
lapping, polishing or otherwise finishing metal or cermets by
means of grinding stones, abrasives or polishing products, other
than gear cutting, gear grinding or gear finishing machines of
heading 84.61.
heading 61 - Machine-tools for planing, shaping, slotting, broaching, gear
cutting, gear grinding or gear finishing, sawing, cutting-off and
other machine-tools working by removing metal or cermets, not
elsewhere specified or included.
heading 62 - Machine-tools (including presses) for working metal by forging,
hammering or die forging (excluding rolling mills);
machine-tools (including presses, slitting lines and cut-to-length
lines) for working metal by bending, folding, straightening,
flattening, shearing, punching, notching or nibbling (excluding
draw-benches); presses for working metal or metal carbides,
not specified above.
heading 63 - Other machine-tools for working metal or cermets, without
removing material.
heading 64 - Machine-tools for working stone, ceramics, concrete, asbestos-
cement or like mineral materials or for cold working glass
heading 65 - Machine-tools (including machines for nailing, stapling, glueing
or otherwise assembling) for working wood, cork, bone, hard
rubber, hard plastics or similar hard materials.
heading 66 - Parts and accessories suitable for use solely or principally with
the machines of headings 84.56 to 84.65, including work or tool
holders, self-opening dieheads, dividing heads and other special
attachments for the machines; tool holders for any type of tool
for working in the hand.
heading 67 - Tools for working in the hand, pneumatic, hydraulic or with
self-contained electric or non-electric motor.
heading 68 - Machinery and apparatus for soldering, brazing or welding,
whether or not capable of cutting, other than those of
heading 85.15; gas-operated surface tempering machines and
appliances.
heading 70 - Calculating machines and pocket-size data recording,
reproducing and displaying machines with calculating
functions; accounting machines, postage-franking machines,
ticket-issuing machines and similar machines, incorporating a
calculating device; cash registers.
heading 71 - Automatic data processing machines and units thereof;
magnetic or optical readers, machines for transcribing data
onto data media in coded form and machines for processing
such data, not elsewhere specified or included.
heading 72 - Other office machines (for example, hectograph or stencil
duplicating machines, addressing machines, automatic
banknote dispensers, coin-sorting machines, coin-counting or
wrapping machines, pencil-sharpening machines, perforating or
stapling machines).
heading 73 - Parts and accessories (other than covers, carrying cases and the
like) suitable for use solely or principally with machines of
headings 84.70 to 84.72.
heading 74 - Machinery for sorting, screening, separating, washing,
crushing, grinding, mixing or kneading earth, stone, ores or
other mineral substances, in solid (including powder or paste)
form; machinery for agglomerating, shaping or moulding solid
mineral fuels, ceramic paste, unhardened cements, plastering
materials or other mineral products in powder or paste form;
machines for forming foundry moulds of sand.
heading 75 - Machines for assembling electric or electronic lamps, tubes or
valves or flashbulbs, in glass envelopes; machines for
manufacturing or hot working glass or glassware.
heading 76 - Automatic goods-vending machines (for example, postage
stamp, cigarette, food or beverage machines), including money-
changing machines.
heading 77 - Machinery for working rubber or plastics or for the
manufacture of products from these materials, not specified or
included elsewhere in this Chapter.
heading 78 - Machinery for preparing or making up tobacco, not specified or
included elsewhere in this Chapter.
heading 79 - Machines and mechanical appliances having individual
functions, not specified or included elsewhere in this Chapter.
heading 80 - Moulding boxes for metal foundry; mould bases; moulding
patterns; moulds for metal (other than ingot moulds), metal
carbides, glass, mineral materials, rubber or plastics.
heading 81 - Taps, cocks, valves and similar appliances for pipes, boiler
shells, tanks, vats or the like, including pressure-reducing valves
and thermostatically controlled valves.
heading 82 - Ball or roller bearings.
heading 83 - Transmission shafts (including cam shafts and crank shafts)
and cranks; bearing housings and plain shaft bearings; gears
and gearing; ball or roller screws; gear boxes and other speed
changers, including torque converters; flywheels and pulleys,
including pulley blocks; clutches and shaft couplings (including
universal joints).
heading 84 - Gaskets and similar joints of metal sheeting combined with
other material or of two or more layers of metal; sets or
assortments of gaskets and similar joints, dissimilar in
composition, put up in pouches, envelopes or similar packings;
mechanical seals.
heading 85 - Mac hines for additive manufacturing.
heading 86 - Machines and apparatus of a kind used solely or principally for
the manufacture of semiconductor boules or wafers,
semiconductor devices, electronic integrated circuits or flat
panel displays; machines and apparatus specified in Note 11 (C)
to this Chapter; parts and accessories.
heading 87 - Machinery parts, not containing electrical connectors,
insulators, coils, contacts or other electrical features, not
specified or included elsewhere in this Chapter. | {"heading_id": "19"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: cinema camera acessories
These are the possible headings: heading 01 - Optical fibres and optical fibre bundles; optical fibre cables other
than those of heading 85.44; sheets and plates of polarising
material; lenses (including contact lenses), prisms, mirrors and
other optical elements, of any material, unmounted, other than
such elements of glass not optically worked.
heading 02 - Lenses, prisms, mirrors and other optical elements, of any
material, mounted, being parts of or fittings for instruments or
apparatus, other than such elements of glass not optically
worked.
heading 03 - Frames and mountings for spectacles, goggles or the like, and
parts thereof.
heading 04 - Spectacles, goggles and the like, corrective, protective or other.
heading 05 - Binoculars, monoculars, other optical telescopes, and mountings
therefor; other astronomical instruments and mountings
therefor, but not including instruments for radio-astronomy.
heading 06 - Photographic (other than cinematographic) cameras;
photographic flashlight apparatus and flashbulbs other than
discharge lamps of heading 85.39.
heading 07 - Cinematographic cameras and projectors, whether or not
incorporating sound recording or reproducing apparatus.
heading 08 - Image projectors, other than cinematographic; photographic
(other than cinematographic) enlargers and reducers.
heading 10 - Apparatus and equipment for photographic (including
cinematographic) laboratories, not specified or included
elsewhere in this Chapter; negatoscopes; projection screens.
heading 11 - Compound optical microscopes, including those for
photomicrography, cinephotomicrography or microprojection
heading 12 - Microscopes other than optical microscopes; diffraction
apparatus.
heading 13 - Lasers, other than laser diodes; other optical appliances and
instruments, not specified or included elsewhere in this Chapter.
heading 14 - Direction finding compasses; other navigational instruments and
appliances.
heading 15 - Surveying (including photogrammetrical surveying),
hydrographic, oceanographic, hydrological, meteorological or
geophysical instruments and appliances, excluding compasses;
rangefinders.
heading 16 - Balances of a sensitivity of 5 cg or better, with or without weights.
heading 17 - Drawing, marking-out or mathematical calculating instruments
(for example, drafting machines, pantographs, protractors,
drawing sets, slide rules, disc calculators); instruments for
measuring length, for use in the hand (for example, measuring
rods and tapes, micrometers, callipers), not specified or included
elsewhere in this Chapter.
heading 18 - Instruments and appliances used in medical, surgical, dental or
veterinary sciences, including scintigraphic apparatus, other
electro-medical apparatus and sight-testing instruments.
heading 19 - Mechano-therapy appliances; massage apparatus; psychological
aptitude-testing apparatus; ozone therapy, oxygen therapy,
aerosol therapy, artificial respiration or other therapeutic
respiration apparatus.
heading 20 - Other breathing appliances and gas masks, excluding protective
masks having neither mechanical parts nor replaceable filters.
heading 21 - Orthopaedic appliances, including crutches, surgical belts and
trusses; splints and other fracture appliances; artificial parts of
the body; hearing aids and other appliances which are worn or
carried, or implanted in the body, to compensate for a defect or
disability.
heading 22 - Apparatus based on the use of X-rays or of alpha, beta, gamma
or other ionising radiations, whether or not for medical, surgical,
dental or veterinary uses, including radiography or radiotherapy
apparatus, X-ray tubes and other X-ray generators, high tension
generators, control panels and desks, screens, examination or
treatment tables, chairs and the like.
heading 23 - Instruments, apparatus and models, designed for
demonstrational purposes (for example, in education or
exhibitions), unsuitable for other uses.
heading 24 - Machines and appliances for testing the hardness, strength,
compressibility, elasticity or other mechanical properties of
materials (for example, metals, wood, textiles, paper, plastics).
heading 25 - Hydrometers and similar floating instruments, thermometers,
pyrometers, barometers, hygrometers and psychrometers,
recording or not, and any combination of these instruments.
heading 26 - Instruments and apparatus for measuring or checking the flow,
level, pressure or other variables of liquids or gases (for example,
flow meters, level gauges, manometers, heat meters), excluding
instruments and apparatus of heading 90.14, 90.15, 90.28 or
90.32.
heading 27 - Instruments and apparatus for physical or chemical analysis (for
example, polarimeters, refractometers, spectrometers, gas or
smoke analysis apparatus); instruments and apparatus for
measuring or checking viscosity, porosity, expansion, surface
tension or the like; instruments and apparatus for measuring or
checking quantities of heat, sound or light (including exposure
meters); microtomes.
heading 28 - Gas, liquid or electricity supply or production meters, including
calibrating meters therefor.
heading 29 - Revolution counters, production counters, taximeters,
mileometers, pedometers and the like; speed indicators and
tachometers, other than those of heading 90.14 or 90.15;
stroboscopes.
heading 30 - Oscilloscopes, spectrum analysers and other instruments and
apparatus for measuring or checking electrical quantities,
excluding meters of heading 90.28; instruments and apparatus
for measuring or detecting alpha, beta, gamma, X-ray, cosmic or
other ionising radiations.
heading 31 - Measuring or checking instruments, appliances and machines,
not specified or included elsewhere in this Chapter; profile
projectors.
heading 32 - Automatic regulating or cont rolling instruments and apparatus.
heading 33 - Parts and accessories (not specified or included elsewhere in this
Chapter) for machines, appliances, instruments or apparatus of
Chapter 90. | {"heading_id": "07"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: adjustable wrench
These are the possible headings: heading 01 - Hand tools, the following : spades, shovels, mattocks, picks, hoes,
forks and rakes; axes, bill hooks and similar hewing tools;
secateurs and pruners of any kind; scythes, sickles, hay knives,
hedge shears, timber wedges and other tools of a kind used in
agriculture, horticulture or forestry.
heading 02 - Hand saws; blades for saws of all kinds (including slitting,
slotting or toothless saw blades).
heading 03 - Files, rasps, pliers (including cutting pliers), pincers, tweezers,
metal cutting shears, pipe-cutters, bolt croppers, perforating
punches and similar hand tools.
heading 04 - Hand-operated spanners and wrenches (including torque meter
wrenches but not including tap wrenches); interchangeable
spanner sockets, with or without handles.
heading 05 - Hand tools (including glaziers' diamonds), not elsewhere
specified or included; blow lamps; vices, clamps and the like,
other than accessories for and parts of, machine-tools or water-
jet cutting machines; anvils; portable forges; hand or pedal-
operated grinding wheels with frameworks.
heading 06 - Tools of two or more of the headings 82.02 to 82.05, put up in sets
for retail sale
heading 07 - Interchangeable tools for hand tools, whether or not power-
operated, or for machine-tools (for example, for pressing,
stamping, punching, tapping, threading, drilling, boring,
broaching, milling, turning or screw driving), including dies for
drawing or extruding metal, and rock drilling or earth boring
tools.
heading 08 - Knives and cutting blades, for machines or for mechanical
appliances.
heading 09 - Plates, sticks, tips and the like for tools, unmounted, of cermets.
heading 10 - Hand-operated mechanical appliances, weighing 10 kg or less,
used in the preparation, conditioning or serving of food or drink.
heading 11 - Knives with cutting blades, serrated or not (including pruning
knives), other than knives of heading 82.08, and blades therefor.
heading 12 - Razors and razor blades (including razor blade blanks in strips).
heading 13 - Scissors, tailors' shears and similar shears, and blades therefor.
heading 14 - Other articles of cutlery (for example, hair clippers, butchers' or
kitchen cleavers, choppers and mincing knives, paper knives);
manicure or pedicure sets and instruments (including nail files).
heading 15 - Spoons, forks, ladles, skimmers, cake-servers, fish-knives, butter-
knives, sugar tongs and similar kitchen or tableware. | {"heading_id": "04"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: simple cut razors
These are the possible headings: heading 01 - Hand tools, the following : spades, shovels, mattocks, picks, hoes,
forks and rakes; axes, bill hooks and similar hewing tools;
secateurs and pruners of any kind; scythes, sickles, hay knives,
hedge shears, timber wedges and other tools of a kind used in
agriculture, horticulture or forestry.
heading 02 - Hand saws; blades for saws of all kinds (including slitting,
slotting or toothless saw blades).
heading 03 - Files, rasps, pliers (including cutting pliers), pincers, tweezers,
metal cutting shears, pipe-cutters, bolt croppers, perforating
punches and similar hand tools.
heading 04 - Hand-operated spanners and wrenches (including torque meter
wrenches but not including tap wrenches); interchangeable
spanner sockets, with or without handles.
heading 05 - Hand tools (including glaziers' diamonds), not elsewhere
specified or included; blow lamps; vices, clamps and the like,
other than accessories for and parts of, machine-tools or water-
jet cutting machines; anvils; portable forges; hand or pedal-
operated grinding wheels with frameworks.
heading 06 - Tools of two or more of the headings 82.02 to 82.05, put up in sets
for retail sale
heading 07 - Interchangeable tools for hand tools, whether or not power-
operated, or for machine-tools (for example, for pressing,
stamping, punching, tapping, threading, drilling, boring,
broaching, milling, turning or screw driving), including dies for
drawing or extruding metal, and rock drilling or earth boring
tools.
heading 08 - Knives and cutting blades, for machines or for mechanical
appliances.
heading 09 - Plates, sticks, tips and the like for tools, unmounted, of cermets.
heading 10 - Hand-operated mechanical appliances, weighing 10 kg or less,
used in the preparation, conditioning or serving of food or drink.
heading 11 - Knives with cutting blades, serrated or not (including pruning
knives), other than knives of heading 82.08, and blades therefor.
heading 12 - Razors and razor blades (including razor blade blanks in strips).
heading 13 - Scissors, tailors' shears and similar shears, and blades therefor.
heading 14 - Other articles of cutlery (for example, hair clippers, butchers' or
kitchen cleavers, choppers and mincing knives, paper knives);
manicure or pedicure sets and instruments (including nail files).
heading 15 - Spoons, forks, ladles, skimmers, cake-servers, fish-knives, butter-
knives, sugar tongs and similar kitchen or tableware. | {"heading_id": "12"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: cotton knitting thread
These are the possible headings: heading 01 - Cotton, not carded or combed.
heading 02 - Cotton w aste (including yarn waste and garnetted stock).
heading 03 - Cotton, carded or combed.
heading 04 - Cotton sewing thread, whether or not put up for retail sale.
heading 05 - Cotton yarn (other than sewing thread), containing 85 % or
more by weight of cotton, not put up for retail sale.
heading 06 - Cotton yarn (other than sewing thread), containing less than
85 % by weight of cotton, not put up for retail sale.
heading 07 - Cotton yarn (other than sewing thread) put up for retail sale.
heading 08 - Woven fabrics of cotton, containing 85 % or more by weight of
cotton, weighing not more than 200 g/m2
.
heading 09 - Woven fabrics of cotton, containing 85 % or more by weight of
cotton, weighing more than 200 g/m2
.
heading 10 - Woven fabrics of cotton, containing less than 85 % by weight of
cotton, mixed mainly or solely with man-made fibres, weighing
not more than 200 g/m2
.
heading 11 - Woven fabrics of cotton, containing less than 85 % by weight of
cotton, mixed mainly or solely with man-made fibres, weighing
more than 200 g/m2
.
heading 12 - Other woven fabrics of cotton. | {"heading_id": "05"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: unvulcanised rubber
These are the possible headings: heading 01 - Natural rubber, balata, gutta-percha, guayule, chicle and similar
natural gums, in primary forms or in plates, sheets or strip.
heading 02 - Synthetic rubber and factice derived from oils, in primary forms
or in plates, sheets or strip; mixtures of any product of
heading 40.01 with any product of this heading, in primary forms
or in plates, sheets or strip.
heading 03 - Reclaimed rubber in primary forms or in plates, sheets or strip.
heading 04 - Waste, parings and scrap of rubber (other than hard rubber)
and powders and granules obtained therefrom.
heading 05 - Compounded rubber, unvulcanised, in primary forms or in
plates, sheets or strip.
heading 06 - Other forms (for example, rods, tubes and profile shapes) and
articles (for example, discs and rings), of unvulcanised rubber.
heading 07 - Vulcanised rubber thread and cord.
heading 08 - Plates, sheets, strip, rods and profile shapes, of vulcanised rubber
other than hard rubber.
heading 09 - Tubes, pipes and hoses, of vulcanised rubber other than hard
rubber, with or without their fittings (for example, joints, elbows,
flanges).
heading 10 - Conveyor or transmission belts or belting, of vulcanised rub ber.
heading 11 - New pneumatic tyres, of rubber.
heading 12 - Retreaded or used pneumatic tyres of rubber; solid or cushion
tyres, tyre treads and tyre flaps, of rubber.
heading 13 - Inner tubes, of rubber.
heading 14 - Hygienic or pharmaceutical articles (including teats), of
vulcanised rubber other than hard rubber, with or without
fittings of hard rubber.
heading 15 - Articles of apparel and clothing accessories (including gloves,
mittens and mitts), for all purposes, of vulcanised rubber other
than hard rubber.
heading 16 - Other articles of vulcanised rubber other than hard rubber.
heading 17 - Hard rubber (for example, ebonite) in all forms, including waste
and scrap; articles of hard rubber. | {"heading_id": "05"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: prophylactic blend
These are the possible headings: heading 01 - Glands and other organs for organo-therapeutic uses, dried,
whether or not powdered; extracts of glands or other organs or
of their secretions for organo-therapeutic uses; heparin and its
salts; other human or animal substances prepared for
therapeuti
heading 02 - Human blood; animal blood prepared for therapeutic,
prophylactic or diagnostic uses; antisera, other blood fractions
and immunological products, whether or not modified or
obtained by means of biotechnological processes; vaccines,
toxins, cultures of micro-organisms (excluding yeasts)
heading 03 - Medicaments (excluding goods of heading 30.02, 30.05 or 30.06)
consisting of two or more constituents which have been mixed
together for therapeutic or prophylactic uses, not put up in
measured doses or in forms or packings for retail sale.
heading 04 - Medicaments (excluding goods of heading 30.02, 30.05 or 30.06)
consisting of mixed or unmixed products for therapeutic or
prophylactic uses, put up in measured doses (including those in
the form of transdermal administration systems) or in forms or
packings for retail sale.
heading 05 - Wadding, gauze, bandages and similar articles (for example,
dressings, adhesive plasters, poultices), impregnated or coated
with pharmaceutical substances or put up in forms or packings
for retail sale for medical, surgical, dental or veterinary
purposes.
heading 06 - Pharmaceutical goods specified in Note 4 to this Chapter. | {"heading_id": "03"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: tilidine INN
These are the possible headings: heading 01 - Acyclic hydrocarbons .
heading 02 - Cyclic hydrocarbons .
heading 03 - Halogenated derivatives of hydrocarbons .
heading 04 - Sulphonated, nitrated or nitrosated derivatives of hydrocarbons,
heading 05 - Acyclic alcohols and their halogenated, sulphonated, nitrated or
heading 06 - Cyclic alcohols and their halogenated, sulphonated, nitrated or
heading 07 - Phenols; phenol -alcohols .
heading 08 - Halogenated, sulphonated, nitrated or nitrosated derivatives of
heading 09 - Ethers, ether -alcohols, ether -phenols, ether -alcohol -phenols,
heading 10 - Epoxides, epoxyalcohols, epoxyphenols and epoxyethers, with a
heading 12 - Aldehydes, whether or not with other oxygen function; cyclic
heading 15 - Saturated acyclic monocarboxylic acids and their anhydrides,
heading 16 - Unsaturated acyclic monocarboxylic acids, cyclic monocarboxylic
heading 17 - Polycarboxylic acids, their anhydrides, halides, peroxides and
heading 18 - Carboxylic acids with additional oxygen function and their
heading 19 - Phosphoric esters and their salts, including lactophosphates;
heading 20 - Esters of other inorganic acids of non -metals (excluding esters
heading 21 - Amine -function compounds.
heading 22 - Oxygen -function amino -compounds.
heading 23 - Quaternary ammonium salts and hydroxides; lecithins and
heading 24 - Carboxyamide -function compounds; amide -function compounds
heading 25 - Carboxyimide -function compounds (including saccharin and its
heading 26 - Nitrile -function compounds.
heading 30 - Organo -sulphur compounds.
heading 31 - Other organo -inorganic compounds .
heading 32 - Heterocyclic compounds with oxygen hetero -atom(s) only.
heading 33 - Heterocyclic compounds with nitrogen hetero -atom(s) only.
heading 34 - Nucleic acids and their salts, whether or not chemically defined;
heading 35 - Sulphonamides.
heading 36 - Provitamins and vitamins, natural or reproduced by synthesis
heading 37 - Hormones, prostaglandins, thromboxanes and leukotrienes,
heading 38 - Glycosides, natural or reproduced by synthesis, and their salts,
heading 39 - Alkaloids, natural or reproduced by synthesis, and their salts, | {"heading_id": "22"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: tool holder set
These are the possible headings: heading 01 - Nuclear reactors; fuel elements (cartridges), non-irradiated, for
nuclear reactors; machinery and apparatus for isotopic
separation.
heading 02 - Steam or other vapour generating boilers (other than central
heating hot water boilers capable also of producing low pressure
steam); super-heated water boilers.
heading 03 - Central heating boilers other than those of heading 84.02.
heading 04 - Auxiliary plant for use with boilers of heading 84.02 or 84.03 (for
example, economisers, super-heaters, soot removers, gas
recoverers); condensers for steam or other vapour power units.
heading 05 - Producer gas or water gas generators, with or without their
purifiers; acetylene gas generators and similar water process gas
generators, with or without their purifiers.
heading 06 - Steam turbines and other vapour turbines.
heading 07 - Spark-ignition reciprocating or rotary internal combustion
piston engines.
heading 08 - Compression-ignition internal combustion piston engines (diesel
or semi-diesel engines).
heading 09 - Parts suitable for use solely or principally with the engines of
heading 84.07 or 84.08.
heading 10 - Hydraulic turbines, water wheels, and regulators therefor.
heading 11 - Turbo -jets, turbo -propellers and other gas turbines.
heading 12 - Othe r engines and motors.
heading 13 - Pumps for liquids, whether or not fitted with a measuring device;
liquid elevators.
heading 14 - Air or vacuum pumps, air or other gas compressors and fans;
ventilating or recycling hoods incorporating a fan, whether or not
fitted with filters; gas-tight biological safety cabinets, whether
or not fitted with filters.
heading 15 - Air conditioning machines, comprising a motor-driven fan and
elements for changing the temperature and humidity, including
those machines in which the humidity cannot be separately
regulated.
heading 16 - Furnace burners for liquid fuel, for pulverised solid fuel or for
gas; mechanical stokers, including their mechanical grates,
mechanical ash dischargers and similar appliances.
heading 17 - Industrial or laboratory furnaces and ovens, including
incinerators, non-electric.
heading 18 - Refrigerators, freezers and other refrigerating or freezing
equipment, electric or other; heat pumps other than air
conditioning machines of heading 84.15.
heading 19 - Machinery, plant or laboratory equipment, whether or not
electrically heated (excluding furnaces, ovens and other
equipment of heading 85.14), for the treatment of materials by a
process involving a change of temperature such as heating,
cooking, roasting, distilling, rectifying, sterilising, pasteurising,
steaming, drying, evaporating, vaporising, condensing or cooling,
other than machinery or plant of a kind used for domestic
purposes; instantaneous or storage water heaters, non-electric.
heading 20 - Calendering or other rolling machines, other than for metals or
glass, and cylinders therefor.
heading 21 - Centrifuges, including centrifugal dryers; filtering or purifying
machinery and apparatus, for liquids or gases.
heading 22 - Dish washing machines; machinery for cleaning or drying bottles
or other containers; machinery for filling, closing, sealing or
labelling bottles, cans, boxes, bags or other containers; machinery
for capsuling bottles, jars, tubes and similar containers; other
packing or wrapping machinery (including heat-shrink wrapping
machinery); machinery for aerating beverages.
heading 23 - Weighing machinery (excluding balances of a sensitivity of 5 cg
or better), including weight operated counting or checking
machines; weighing machine weights of all kinds.
heading 24 - Mechanical appliances (whether or not hand-operated) for
projecting, dispersing or spraying liquids or powders; fire
extinguishers, whether or not charged; spray guns and similar
appliances; steam or sand blasting machines and similar jet
projecting machines.
heading 25 - Pulley tackle and hoists other than skip hoists; winches and
capstans; jacks.
heading 26 - Ships' derricks; cranes, including cable cranes; mobile lifting
frames, straddle carriers and works trucks fitted with a crane.
heading 27 - Fork-lift trucks; other works trucks fitted with lifting or handling
equipment.
heading 28 - Other lifting, handling, loading or unloading machinery (for
example, lifts, escalators, conveyors, teleferics).
heading 29 - Self-propelled bulldozers, angledozers, graders, levellers,
scrapers, mechanical shovels, excavators, shovel loaders, tamping
machines and road rollers.
heading 30 - Other moving, grading, levelling, scraping, excavating, tamping,
compacting, extracting or boring machinery, for earth, minerals
or ores; pile-drivers and pile-extractors; snow-ploughs and snow-
blowers.
heading 31 - Parts suitable for use solely or principally with the machinery of
headings 84.25 to 84.30.
heading 32 - Agricultural, horticultural or forestry machinery for soil
preparation or cultivation; lawn or sports-ground rollers.
heading 33 - Harvesting or threshing machinery, including straw or fodder
balers; grass or hay mowers; machines for cleaning, sorting or
grading eggs, fruit or other agricultural produce, other than
machinery of heading 84.37.
heading 34 - Milking machines and dairy ma chinery.
heading 35 - Presses, crushers and similar machinery used in the manufacture
of wine, cider, fruit juices or similar beverages.
heading 36 - Other agricultural, horticultural, forestry, poultry-keeping or
bee-keeping machinery, including germination plant fitted with
mechanical or thermal equipment; poultry incubators and
brooders.
heading 37 - Machines for cleaning, sorting or grading seed, grain or dried
leguminous vegetables; machinery used in the milling industry or
for the working of cereals or dried leguminous vegetables, other
than farm-type machinery.
heading 38 - Machinery, not specified or included elsewhere in this Chapter,
for the industrial preparation or manufacture of food or drink,
other than machinery for the extraction or preparation of
animal or fixed vegetable or microbial fats or oils.
heading 39 - Machinery for making pulp of fibrous cellulosic material or for
making or finishing paper or paperboard.
heading 40 - Book -binding machinery, including book -sewing machines.
heading 41 - Other machinery for making up paper pulp, paper or
paperboard, including cutting machines of all kinds.
heading 42 - Machinery, apparatus and equipment (other than the machines
of headings 84.56 to 84.65) for preparing or making plates,
cylinders or other printing components; plates, cylinders and
other printing components; plates, cylinders and lithographic
stones, prepared for printing purposes (for example, planed,
grained or polished).
heading 43 - Printing machinery used for printing by means of plates,
cylinders and other printing components of heading 84.42;
other printers, copying machines and facsimile machines,
whether or not combined; parts and accessories thereof.
heading 44 - Machines for extruding, drawing, texturing or cutting man-
made textile materials.
heading 45 - Machines for preparing textile fibres; spinning, doubling or
twisting machines and other machinery for producing textile
yarns; textile reeling or winding (including weft-winding)
machines and machines for preparing textile yarns for use on
the machines of heading 84.46 or 84.47.
heading 46 - Weaving machines (looms).
heading 47 - Knitting machines, stitch-bonding machines and machines for
making gimped yarn, tulle, lace, embroidery, trimmings, braid
or net and machines for tufting.
heading 48 - Auxiliary machinery for use with machines of heading 84.44,
84.45, 84.46 or 84.47 (for example, dobbies, Jacquards,
automatic stop motions, shuttle changing mechanisms); parts
and accessories suitable for use solely or principally with the
machines of this heading or of heading 84.44, 84.45, 84.46 or
84.47 (for example, spindles and spindle flyers, card clothing,
combs, extruding nipples, shuttles, healds and heald-frames,
hosiery needles).
heading 49 - Machinery for the manufacture or finishing of felt or
nonwovens in the piece or in shapes, including machinery for
making felt hats; blocks for making hats.
heading 50 - Household or laundry-type washing machines, including
machines which both wash and dry.
heading 51 - Machinery (other than machines of heading 84.50) for washing,
cleaning, wringing, drying, ironing, pressing (including fusing
presses), bleaching, dyeing, dressing, finishing, coating or
impregnating textile yarns, fabrics or made up textile articles
and machines for applying the paste to the base fabric or other
support used in the manufacture of floor coverings such as
linoleum; machines for reeling, unreeling, folding, cutting or
pinking textile fabrics.
heading 52 - Sewing machines, other than book-sewing machines of
heading 84.40; furniture, bases and covers specially designed
for sewing machines; sewing machine needles.
heading 53 - Machinery for preparing, tanning or working hides, skins or
leather or for making or repairing footwear or other articles of
hides, skins or leather, other than sewing machines.
heading 54 - Converters, ladles, ingot moulds and casting machines, of a kind
used in metallurgy or in metal foundries.
heading 55 - Metal -rolling mills and rolls therefor.
heading 56 - Machine-tools for working any material by removal of material,
by laser or other light or photon beam, ultrasonic, electro-
discharge, electro-chemical, electron beam, ionic-beam or
plasma arc processes; water-jet cutting machines.
heading 57 - Machining centres, unit construction machines (single station)
and multi-station transfer machines, for working metal.
heading 58 - Lathes (including turning centres) for removing metal.
heading 59 - Machine-tools (including way-type unit head machines) for
drilling, boring, milling, threading or tapping by removing
metal, other than lathes (including turning centres) of
heading 84.58.
heading 60 - Machine-tools for deburring, sharpening, grinding, honing,
lapping, polishing or otherwise finishing metal or cermets by
means of grinding stones, abrasives or polishing products, other
than gear cutting, gear grinding or gear finishing machines of
heading 84.61.
heading 61 - Machine-tools for planing, shaping, slotting, broaching, gear
cutting, gear grinding or gear finishing, sawing, cutting-off and
other machine-tools working by removing metal or cermets, not
elsewhere specified or included.
heading 62 - Machine-tools (including presses) for working metal by forging,
hammering or die forging (excluding rolling mills);
machine-tools (including presses, slitting lines and cut-to-length
lines) for working metal by bending, folding, straightening,
flattening, shearing, punching, notching or nibbling (excluding
draw-benches); presses for working metal or metal carbides,
not specified above.
heading 63 - Other machine-tools for working metal or cermets, without
removing material.
heading 64 - Machine-tools for working stone, ceramics, concrete, asbestos-
cement or like mineral materials or for cold working glass
heading 65 - Machine-tools (including machines for nailing, stapling, glueing
or otherwise assembling) for working wood, cork, bone, hard
rubber, hard plastics or similar hard materials.
heading 66 - Parts and accessories suitable for use solely or principally with
the machines of headings 84.56 to 84.65, including work or tool
holders, self-opening dieheads, dividing heads and other special
attachments for the machines; tool holders for any type of tool
for working in the hand.
heading 67 - Tools for working in the hand, pneumatic, hydraulic or with
self-contained electric or non-electric motor.
heading 68 - Machinery and apparatus for soldering, brazing or welding,
whether or not capable of cutting, other than those of
heading 85.15; gas-operated surface tempering machines and
appliances.
heading 70 - Calculating machines and pocket-size data recording,
reproducing and displaying machines with calculating
functions; accounting machines, postage-franking machines,
ticket-issuing machines and similar machines, incorporating a
calculating device; cash registers.
heading 71 - Automatic data processing machines and units thereof;
magnetic or optical readers, machines for transcribing data
onto data media in coded form and machines for processing
such data, not elsewhere specified or included.
heading 72 - Other office machines (for example, hectograph or stencil
duplicating machines, addressing machines, automatic
banknote dispensers, coin-sorting machines, coin-counting or
wrapping machines, pencil-sharpening machines, perforating or
stapling machines).
heading 73 - Parts and accessories (other than covers, carrying cases and the
like) suitable for use solely or principally with machines of
headings 84.70 to 84.72.
heading 74 - Machinery for sorting, screening, separating, washing,
crushing, grinding, mixing or kneading earth, stone, ores or
other mineral substances, in solid (including powder or paste)
form; machinery for agglomerating, shaping or moulding solid
mineral fuels, ceramic paste, unhardened cements, plastering
materials or other mineral products in powder or paste form;
machines for forming foundry moulds of sand.
heading 75 - Machines for assembling electric or electronic lamps, tubes or
valves or flashbulbs, in glass envelopes; machines for
manufacturing or hot working glass or glassware.
heading 76 - Automatic goods-vending machines (for example, postage
stamp, cigarette, food or beverage machines), including money-
changing machines.
heading 77 - Machinery for working rubber or plastics or for the
manufacture of products from these materials, not specified or
included elsewhere in this Chapter.
heading 78 - Machinery for preparing or making up tobacco, not specified or
included elsewhere in this Chapter.
heading 79 - Machines and mechanical appliances having individual
functions, not specified or included elsewhere in this Chapter.
heading 80 - Moulding boxes for metal foundry; mould bases; moulding
patterns; moulds for metal (other than ingot moulds), metal
carbides, glass, mineral materials, rubber or plastics.
heading 81 - Taps, cocks, valves and similar appliances for pipes, boiler
shells, tanks, vats or the like, including pressure-reducing valves
and thermostatically controlled valves.
heading 82 - Ball or roller bearings.
heading 83 - Transmission shafts (including cam shafts and crank shafts)
and cranks; bearing housings and plain shaft bearings; gears
and gearing; ball or roller screws; gear boxes and other speed
changers, including torque converters; flywheels and pulleys,
including pulley blocks; clutches and shaft couplings (including
universal joints).
heading 84 - Gaskets and similar joints of metal sheeting combined with
other material or of two or more layers of metal; sets or
assortments of gaskets and similar joints, dissimilar in
composition, put up in pouches, envelopes or similar packings;
mechanical seals.
heading 85 - Mac hines for additive manufacturing.
heading 86 - Machines and apparatus of a kind used solely or principally for
the manufacture of semiconductor boules or wafers,
semiconductor devices, electronic integrated circuits or flat
panel displays; machines and apparatus specified in Note 11 (C)
to this Chapter; parts and accessories.
heading 87 - Machinery parts, not containing electrical connectors,
insulators, coils, contacts or other electrical features, not
specified or included elsewhere in this Chapter. | {"heading_id": "66"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: upright freezer
These are the possible headings: heading 01 - Nuclear reactors; fuel elements (cartridges), non-irradiated, for
nuclear reactors; machinery and apparatus for isotopic
separation.
heading 02 - Steam or other vapour generating boilers (other than central
heating hot water boilers capable also of producing low pressure
steam); super-heated water boilers.
heading 03 - Central heating boilers other than those of heading 84.02.
heading 04 - Auxiliary plant for use with boilers of heading 84.02 or 84.03 (for
example, economisers, super-heaters, soot removers, gas
recoverers); condensers for steam or other vapour power units.
heading 05 - Producer gas or water gas generators, with or without their
purifiers; acetylene gas generators and similar water process gas
generators, with or without their purifiers.
heading 06 - Steam turbines and other vapour turbines.
heading 07 - Spark-ignition reciprocating or rotary internal combustion
piston engines.
heading 08 - Compression-ignition internal combustion piston engines (diesel
or semi-diesel engines).
heading 09 - Parts suitable for use solely or principally with the engines of
heading 84.07 or 84.08.
heading 10 - Hydraulic turbines, water wheels, and regulators therefor.
heading 11 - Turbo -jets, turbo -propellers and other gas turbines.
heading 12 - Othe r engines and motors.
heading 13 - Pumps for liquids, whether or not fitted with a measuring device;
liquid elevators.
heading 14 - Air or vacuum pumps, air or other gas compressors and fans;
ventilating or recycling hoods incorporating a fan, whether or not
fitted with filters; gas-tight biological safety cabinets, whether
or not fitted with filters.
heading 15 - Air conditioning machines, comprising a motor-driven fan and
elements for changing the temperature and humidity, including
those machines in which the humidity cannot be separately
regulated.
heading 16 - Furnace burners for liquid fuel, for pulverised solid fuel or for
gas; mechanical stokers, including their mechanical grates,
mechanical ash dischargers and similar appliances.
heading 17 - Industrial or laboratory furnaces and ovens, including
incinerators, non-electric.
heading 18 - Refrigerators, freezers and other refrigerating or freezing
equipment, electric or other; heat pumps other than air
conditioning machines of heading 84.15.
heading 19 - Machinery, plant or laboratory equipment, whether or not
electrically heated (excluding furnaces, ovens and other
equipment of heading 85.14), for the treatment of materials by a
process involving a change of temperature such as heating,
cooking, roasting, distilling, rectifying, sterilising, pasteurising,
steaming, drying, evaporating, vaporising, condensing or cooling,
other than machinery or plant of a kind used for domestic
purposes; instantaneous or storage water heaters, non-electric.
heading 20 - Calendering or other rolling machines, other than for metals or
glass, and cylinders therefor.
heading 21 - Centrifuges, including centrifugal dryers; filtering or purifying
machinery and apparatus, for liquids or gases.
heading 22 - Dish washing machines; machinery for cleaning or drying bottles
or other containers; machinery for filling, closing, sealing or
labelling bottles, cans, boxes, bags or other containers; machinery
for capsuling bottles, jars, tubes and similar containers; other
packing or wrapping machinery (including heat-shrink wrapping
machinery); machinery for aerating beverages.
heading 23 - Weighing machinery (excluding balances of a sensitivity of 5 cg
or better), including weight operated counting or checking
machines; weighing machine weights of all kinds.
heading 24 - Mechanical appliances (whether or not hand-operated) for
projecting, dispersing or spraying liquids or powders; fire
extinguishers, whether or not charged; spray guns and similar
appliances; steam or sand blasting machines and similar jet
projecting machines.
heading 25 - Pulley tackle and hoists other than skip hoists; winches and
capstans; jacks.
heading 26 - Ships' derricks; cranes, including cable cranes; mobile lifting
frames, straddle carriers and works trucks fitted with a crane.
heading 27 - Fork-lift trucks; other works trucks fitted with lifting or handling
equipment.
heading 28 - Other lifting, handling, loading or unloading machinery (for
example, lifts, escalators, conveyors, teleferics).
heading 29 - Self-propelled bulldozers, angledozers, graders, levellers,
scrapers, mechanical shovels, excavators, shovel loaders, tamping
machines and road rollers.
heading 30 - Other moving, grading, levelling, scraping, excavating, tamping,
compacting, extracting or boring machinery, for earth, minerals
or ores; pile-drivers and pile-extractors; snow-ploughs and snow-
blowers.
heading 31 - Parts suitable for use solely or principally with the machinery of
headings 84.25 to 84.30.
heading 32 - Agricultural, horticultural or forestry machinery for soil
preparation or cultivation; lawn or sports-ground rollers.
heading 33 - Harvesting or threshing machinery, including straw or fodder
balers; grass or hay mowers; machines for cleaning, sorting or
grading eggs, fruit or other agricultural produce, other than
machinery of heading 84.37.
heading 34 - Milking machines and dairy ma chinery.
heading 35 - Presses, crushers and similar machinery used in the manufacture
of wine, cider, fruit juices or similar beverages.
heading 36 - Other agricultural, horticultural, forestry, poultry-keeping or
bee-keeping machinery, including germination plant fitted with
mechanical or thermal equipment; poultry incubators and
brooders.
heading 37 - Machines for cleaning, sorting or grading seed, grain or dried
leguminous vegetables; machinery used in the milling industry or
for the working of cereals or dried leguminous vegetables, other
than farm-type machinery.
heading 38 - Machinery, not specified or included elsewhere in this Chapter,
for the industrial preparation or manufacture of food or drink,
other than machinery for the extraction or preparation of
animal or fixed vegetable or microbial fats or oils.
heading 39 - Machinery for making pulp of fibrous cellulosic material or for
making or finishing paper or paperboard.
heading 40 - Book -binding machinery, including book -sewing machines.
heading 41 - Other machinery for making up paper pulp, paper or
paperboard, including cutting machines of all kinds.
heading 42 - Machinery, apparatus and equipment (other than the machines
of headings 84.56 to 84.65) for preparing or making plates,
cylinders or other printing components; plates, cylinders and
other printing components; plates, cylinders and lithographic
stones, prepared for printing purposes (for example, planed,
grained or polished).
heading 43 - Printing machinery used for printing by means of plates,
cylinders and other printing components of heading 84.42;
other printers, copying machines and facsimile machines,
whether or not combined; parts and accessories thereof.
heading 44 - Machines for extruding, drawing, texturing or cutting man-
made textile materials.
heading 45 - Machines for preparing textile fibres; spinning, doubling or
twisting machines and other machinery for producing textile
yarns; textile reeling or winding (including weft-winding)
machines and machines for preparing textile yarns for use on
the machines of heading 84.46 or 84.47.
heading 46 - Weaving machines (looms).
heading 47 - Knitting machines, stitch-bonding machines and machines for
making gimped yarn, tulle, lace, embroidery, trimmings, braid
or net and machines for tufting.
heading 48 - Auxiliary machinery for use with machines of heading 84.44,
84.45, 84.46 or 84.47 (for example, dobbies, Jacquards,
automatic stop motions, shuttle changing mechanisms); parts
and accessories suitable for use solely or principally with the
machines of this heading or of heading 84.44, 84.45, 84.46 or
84.47 (for example, spindles and spindle flyers, card clothing,
combs, extruding nipples, shuttles, healds and heald-frames,
hosiery needles).
heading 49 - Machinery for the manufacture or finishing of felt or
nonwovens in the piece or in shapes, including machinery for
making felt hats; blocks for making hats.
heading 50 - Household or laundry-type washing machines, including
machines which both wash and dry.
heading 51 - Machinery (other than machines of heading 84.50) for washing,
cleaning, wringing, drying, ironing, pressing (including fusing
presses), bleaching, dyeing, dressing, finishing, coating or
impregnating textile yarns, fabrics or made up textile articles
and machines for applying the paste to the base fabric or other
support used in the manufacture of floor coverings such as
linoleum; machines for reeling, unreeling, folding, cutting or
pinking textile fabrics.
heading 52 - Sewing machines, other than book-sewing machines of
heading 84.40; furniture, bases and covers specially designed
for sewing machines; sewing machine needles.
heading 53 - Machinery for preparing, tanning or working hides, skins or
leather or for making or repairing footwear or other articles of
hides, skins or leather, other than sewing machines.
heading 54 - Converters, ladles, ingot moulds and casting machines, of a kind
used in metallurgy or in metal foundries.
heading 55 - Metal -rolling mills and rolls therefor.
heading 56 - Machine-tools for working any material by removal of material,
by laser or other light or photon beam, ultrasonic, electro-
discharge, electro-chemical, electron beam, ionic-beam or
plasma arc processes; water-jet cutting machines.
heading 57 - Machining centres, unit construction machines (single station)
and multi-station transfer machines, for working metal.
heading 58 - Lathes (including turning centres) for removing metal.
heading 59 - Machine-tools (including way-type unit head machines) for
drilling, boring, milling, threading or tapping by removing
metal, other than lathes (including turning centres) of
heading 84.58.
heading 60 - Machine-tools for deburring, sharpening, grinding, honing,
lapping, polishing or otherwise finishing metal or cermets by
means of grinding stones, abrasives or polishing products, other
than gear cutting, gear grinding or gear finishing machines of
heading 84.61.
heading 61 - Machine-tools for planing, shaping, slotting, broaching, gear
cutting, gear grinding or gear finishing, sawing, cutting-off and
other machine-tools working by removing metal or cermets, not
elsewhere specified or included.
heading 62 - Machine-tools (including presses) for working metal by forging,
hammering or die forging (excluding rolling mills);
machine-tools (including presses, slitting lines and cut-to-length
lines) for working metal by bending, folding, straightening,
flattening, shearing, punching, notching or nibbling (excluding
draw-benches); presses for working metal or metal carbides,
not specified above.
heading 63 - Other machine-tools for working metal or cermets, without
removing material.
heading 64 - Machine-tools for working stone, ceramics, concrete, asbestos-
cement or like mineral materials or for cold working glass
heading 65 - Machine-tools (including machines for nailing, stapling, glueing
or otherwise assembling) for working wood, cork, bone, hard
rubber, hard plastics or similar hard materials.
heading 66 - Parts and accessories suitable for use solely or principally with
the machines of headings 84.56 to 84.65, including work or tool
holders, self-opening dieheads, dividing heads and other special
attachments for the machines; tool holders for any type of tool
for working in the hand.
heading 67 - Tools for working in the hand, pneumatic, hydraulic or with
self-contained electric or non-electric motor.
heading 68 - Machinery and apparatus for soldering, brazing or welding,
whether or not capable of cutting, other than those of
heading 85.15; gas-operated surface tempering machines and
appliances.
heading 70 - Calculating machines and pocket-size data recording,
reproducing and displaying machines with calculating
functions; accounting machines, postage-franking machines,
ticket-issuing machines and similar machines, incorporating a
calculating device; cash registers.
heading 71 - Automatic data processing machines and units thereof;
magnetic or optical readers, machines for transcribing data
onto data media in coded form and machines for processing
such data, not elsewhere specified or included.
heading 72 - Other office machines (for example, hectograph or stencil
duplicating machines, addressing machines, automatic
banknote dispensers, coin-sorting machines, coin-counting or
wrapping machines, pencil-sharpening machines, perforating or
stapling machines).
heading 73 - Parts and accessories (other than covers, carrying cases and the
like) suitable for use solely or principally with machines of
headings 84.70 to 84.72.
heading 74 - Machinery for sorting, screening, separating, washing,
crushing, grinding, mixing or kneading earth, stone, ores or
other mineral substances, in solid (including powder or paste)
form; machinery for agglomerating, shaping or moulding solid
mineral fuels, ceramic paste, unhardened cements, plastering
materials or other mineral products in powder or paste form;
machines for forming foundry moulds of sand.
heading 75 - Machines for assembling electric or electronic lamps, tubes or
valves or flashbulbs, in glass envelopes; machines for
manufacturing or hot working glass or glassware.
heading 76 - Automatic goods-vending machines (for example, postage
stamp, cigarette, food or beverage machines), including money-
changing machines.
heading 77 - Machinery for working rubber or plastics or for the
manufacture of products from these materials, not specified or
included elsewhere in this Chapter.
heading 78 - Machinery for preparing or making up tobacco, not specified or
included elsewhere in this Chapter.
heading 79 - Machines and mechanical appliances having individual
functions, not specified or included elsewhere in this Chapter.
heading 80 - Moulding boxes for metal foundry; mould bases; moulding
patterns; moulds for metal (other than ingot moulds), metal
carbides, glass, mineral materials, rubber or plastics.
heading 81 - Taps, cocks, valves and similar appliances for pipes, boiler
shells, tanks, vats or the like, including pressure-reducing valves
and thermostatically controlled valves.
heading 82 - Ball or roller bearings.
heading 83 - Transmission shafts (including cam shafts and crank shafts)
and cranks; bearing housings and plain shaft bearings; gears
and gearing; ball or roller screws; gear boxes and other speed
changers, including torque converters; flywheels and pulleys,
including pulley blocks; clutches and shaft couplings (including
universal joints).
heading 84 - Gaskets and similar joints of metal sheeting combined with
other material or of two or more layers of metal; sets or
assortments of gaskets and similar joints, dissimilar in
composition, put up in pouches, envelopes or similar packings;
mechanical seals.
heading 85 - Mac hines for additive manufacturing.
heading 86 - Machines and apparatus of a kind used solely or principally for
the manufacture of semiconductor boules or wafers,
semiconductor devices, electronic integrated circuits or flat
panel displays; machines and apparatus specified in Note 11 (C)
to this Chapter; parts and accessories.
heading 87 - Machinery parts, not containing electrical connectors,
insulators, coils, contacts or other electrical features, not
specified or included elsewhere in this Chapter. | {"heading_id": "18"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: live mussels food
These are the possible headings: heading 01 - Live fish .
heading 02 - Fish, fresh or chilled, excluding fish fillets and other fish meat of
heading 03.04.
heading 03 - Fish, frozen, excluding fish fillets and other fish meat of heading
03.04.
heading 04 - Fish fillets and other fish meat (whether or not minced), fresh,
chilled or frozen.
heading 05 - Fish, dried, salted or in brine; smoked fish, whether or not
cooked before or during the smoking process.
heading 06 - Crustaceans, whether in shell or not, live, fresh, chilled, frozen,
dried, salted or in brine; smoked crustaceans, whether in shell
or not, whether or not cooked before or during the smoking
process; crustaceans, in shell, cooked by steaming or by boiling
in water, whether or not chilled, frozen, dried, salted or in
brine.
heading 07 - Molluscs, whether in shell or not, live, fresh, chilled, frozen,
dried, salted or in brine; smoked molluscs, whether in shell or
not, whether or not cooked before or during the smoking
process.
heading 08 - Aquatic invertebrates other than crustaceans and molluscs, live,
fresh, chilled, frozen, dried, salted or in brine; smoked aquatic
invertebrates other than crustaceans and molluscs, whether or
not cooked before or during the smoking process.
heading 09 - Flours, meals and pellets of fish, crustaceans, molluscs and
other aquatic invertebrates, fit for human consumption. | {"heading_id": "07"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: standard diode pack
These are the possible headings: heading 01 - Electric motors and gene rators (excluding generating sets).
heading 02 - Electric generating sets and rotary converters.
heading 03 - Parts suitable for use solely or principally with the machines of
heading 85.01 or 85.02.
heading 04 - Electrical transformers, static converters (for example,
rectifiers) and inductors.
heading 05 - Electro-magnets; permanent magnets and articles intended to
become permanent magnets after magnetisation; electro-
magnetic or permanent magnet chucks, clamps and similar
holding devices; electro-magnetic couplings, clutches and
brakes; electro-magnetic lifting heads.
heading 06 - Primary cells and primary batteries.
heading 07 - Electric accumulators, including separators therefor, whether
or not rectangular (including square).
heading 08 - Vacuum cleaners.
heading 09 - Electro-mechanical domestic appliances, with self-contained
electric motor, other than vacuum cleaners of heading 85.08.
heading 10 - Shavers, hair clippers and hair-removing appliances, with self-
contained electric motor.
heading 11 - Electrical ignition or starting equipment of a kind used for
spark-ignition or compression-ignition internal combustion
engines (for example, ignition magnetos, magneto-dynamos,
ignition coils, sparking plugs and glow plugs, starter motors);
generators (for example, dynamos, alternators) and cut-outs of
a kind used in conjunction with such engines.
heading 12 - Electrical lighting or signalling equipment (excluding articles of
heading 85.39), windscreen wipers, defrosters and demisters, of
a kind used for cycles or motor vehicles.
heading 13 - Portable electric lamps designed to function by their own source
of energy (for example, dry batteries, accumulators, magnetos),
other than lighting equipment of heading 85.12.
heading 14 - Industrial or laboratory electric furnaces and ovens (including
those functioning by induction or dielectric loss); other
industrial or laboratory equipment for the heat treatment of
materials by induction or dielectric loss.
heading 15 - Electric (including electrically heated gas), laser or other light
or photon beam, ultrasonic, electron beam, magnetic pulse or
plasma arc soldering, brazing or welding machines and
apparatus, whether or not capable of cutting; electric machines
and apparatus for hot spraying of metals or cermets.
heading 16 - Electric instantaneous or storage water heaters and immersion
heaters; electric space heating apparatus and soil heating
apparatus; electro-thermic hair-dressing apparatus (for
example, hair dryers, hair curlers, curling tong heaters) and
hand dryers; electric smoothing irons; other electro-thermic
appliances of a kind used for domestic purposes; electric
heating resistors, other than those of heading 85.45.
heading 17 - Telephone sets, including smartphones and other telephones for
cellular networks or for other wireless networks; other
apparatus for the transmission or reception of voice, images or
other data, including apparatus for communication in a wired
or wireless network (such as a local or wide area network),
other than transmission or reception apparatus of
heading 84.43, 85.25, 85.27 or 85.28.
heading 18 - Microphones and stands therefor; loudspeakers, whether or not
mounted in their enclosures; headphones and earphones,
whether or not combined with a microphone, and sets consisting
of a microphone and one or more loudspeakers; audio-
frequency electric amplifiers; electric sound amplifier sets.
heading 19 - Sound recording or reproducing apparatus.
heading 21 - Video recording or reproducing apparatus, whether or not
incorporating a video tuner.
heading 22 - Parts and accessories suitable for use solely or principally with
the apparatus of heading 85.19 or 85.21.
heading 23 - Discs, tapes, solid-state non-volatile storage devices, “smart
cards” and other media for the recording of sound or of other
phenomena, whether or not recorded, including matrices and
masters for the production of discs, but excluding products of
Chapter 37.
heading 24 - Flat panel display modules, whether or not incorporating touch-
sensitive screens.
heading 25 - Transmission apparatus for radio-broadcasting or television,
whether or not incorporating reception apparatus or sound
recording or reproducing apparatus; television cameras, digital
cameras and video camera recorders.
heading 26 - Radar apparatus, radio navigational aid apparatus and radio
remote control apparatus.
heading 27 - Reception apparatus for radio-broadcasting, whether or not
combined, in the same housing, with sound recording or
reproducing apparatus or a clock.
heading 28 - Monitors and projectors, not incorporating television reception
apparatus; reception apparatus for television, whether or not
incorporating radio-broadcast receivers or sound or video
recording or reproducing apparatus.
heading 29 - Parts suitable for use solely or principally with the apparatus of
headings 85.24 to 85.28.
heading 30 - Electrical signalling, safety or traffic control equipment for
railways, tramways, roads, inland waterways, parking facilities,
port installations or airfields (other than those of
heading 86.08).
heading 31 - Electric sound or visual signalling apparatus (for example, bells,
sirens, indicator panels, burglar or fire alarms), other than
those of heading 85.12 or 85.30.
heading 32 - Electrical capacitors, fixed, variable or adjustable (pre -set).
heading 33 - Electrical resistors (including rheostats and potentiometers),
other than heating resistors.
heading 34 - Printed circuits.
heading 35 - Electrical apparatus for switching or protecting electrical
circuits, or for making connections to or in electrical circuits
(for example, switches, fuses, lightning arresters, voltage
limiters, surge suppressors, plugs and other connectors,
junction boxes), for a voltage exceeding 1,000 volts.
heading 36 - Electrical apparatus for switching or protecting electrical
circuits, or for making connections to or in electrical circuits
(for example, switches, relays, fuses, surge suppressors, plugs,
sockets, lamp-holders and other connectors, junction boxes), for
a voltage not exceeding 1,000 volts; connectors for optical
fibres, optical fibre bundles or cables.
heading 37 - Boards, panels, consoles, desks, cabinets and other bases,
equipped with two or more apparatus of heading 85.35 or 85.36,
for electric control or the distribution of electricity, including
those incorporating instruments or apparatus of Chapter 90,
and numerical control apparatus, other than switching
apparatus of heading 85.17.
heading 38 - Parts suitable for use solely or principally with the apparatus of
heading 85.35, 85.36 or 85.37.
heading 39 - Electric filament or discharge lamps, including sealed beam
lamp units and ultra-violet or infra-red lamps; arc-lamps; light-
emitting diode (LED) light sources.
heading 40 - Thermionic, cold cathode or photo-cathode valves and tubes
(for example, vacuum or vapour or gas filled valves and tubes,
mercury arc rectifying valves and tubes, cathode-ray tubes,
television camera tubes).
heading 41 - Semiconductor devices (for example, diodes, transistors,
semiconductor-based transducers); photosensitive
semiconductor devices, including photovoltaic cells whether or
not assembled in modules or made up into panels; light-
emitting diodes (LED), whether or not assembled with other
light-emitting diodes (LED); mounted piezo-electric crystals.
heading 42 - Electronic integrated circuits.
heading 43 - Electrical machines and apparatus, having individual functions,
not specified or included elsewhere in this Chapter.
heading 44 - Insulated (including enamelled or anodised) wire, cable
(including co-axial cable) and other insulated electric
conductors, whether or not fitted with connectors; optical fibre
cables, made up of individually sheathed fibres, whether or not
assembled with electric conductors or fitted with connectors.
heading 45 - Carbon electrodes, carbon brushes, lamp carbons, battery
carbons and other articles of graphite or other carbon, with or
without metal, of a kind used for electrical purposes.
heading 46 - Electrical insulators of any material.
heading 47 - Insulating fittings for electrical machines, appliances or
equipment, being fittings wholly of insulating material apart
from any minor components of metal (for example, threaded
sockets) incorporated during moulding solely for purposes of
assembly, other than insulators of heading 85.46; electrical
conduit tubing and joints therefor, of base metal lined with
insulating material.
heading 48 - Electrical parts of machinery or apparatus, not specified or
included elsewhere in this Chapter.
heading 49 - Electrical and electronic waste and scrap . | {"heading_id": "41"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: bound music book
These are the possible headings: heading 01 - Printed books, brochures, leaflets and similar printed matter,
whether or not in single sheets.
heading 02 - Newspapers, journals and periodicals, whether or not illustrated
or containing advertising material.
heading 03 - Children's picture, drawing or colouring books.
heading 04 - Music, printed or in manuscript, whether or not bound or
illustrated.
heading 05 - Maps and hydrographic or similar charts of all kinds, including
heading 06 - Plans and drawings for architectural, engineering, industrial,
commercial, topographical or similar purposes, being originals
drawn by hand; hand-written texts; photographic reproductions
on sensitised paper and carbon copies of the foregoing.
heading 07 - Unused postage, revenue or similar stamps of current or new
issue in the country in which they have, or will have, a
recognised face value; stamp-impressed paper; banknotes;
cheque forms; stock, share or bond certificates and similar
documents of title.
heading 08 - Transfers (d ecalcomanias).
heading 09 - Printed or illustrated postcards; printed cards bearing personal
greetings, messages or announcements, whether or not
illustrated, with or without envelopes or trimmings.
heading 10 - Calendars of any kind, printed, including calendar blocks.
heading 11 - Other printed matter, including printed pictures and
photographs. | {"heading_id": "04"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: gin botle deal
These are the possible headings: heading 01 - Waters, including natural or artificial mineral wa ters and
aerated waters, not containing added sugar o r other sweetening
matter nor flavoured; ice and snow .
heading 02 - Waters, including mineral waters and aerated waters,
containing added su gar or other sweetening matter or
flavoured, and othe r non -alcoholic beverages, not including
fruit, nut or vegetable juices of heading 20.09.
heading 03 - Beer made from malt.
heading 04 - Wine of fre sh grapes , including fortified wines; grape must other
than that of heading 20.09.
heading 05 - Vermouth and other wine of fresh grapes flavoured with plants
or aromatic substances .
heading 06 - Other fermented beverages (for example, cider, perry, mead,
saké); mixtures of fermented beverages and mixtures of
fermented beverages and non-alcoholic beverages, not elsewhere
specified or included.
heading 07 - Undenatur ed ethyl alcohol of an alcoholic strength by volume of
80 % vol. or higher; ethyl alcoh ol and other spirits, denatured, of
any strength .
heading 08 - Undenatured ethyl alcohol of an alcoholic strength by volume of
less than 80 % vol.; spirits, liqueurs and other spirituous
beverages .
heading 09 - Vinegar and substitutes for vinegar obtained from acetic acid. | {"heading_id": "08"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: non optical microscopes
These are the possible headings: heading 01 - Optical fibres and optical fibre bundles; optical fibre cables other
than those of heading 85.44; sheets and plates of polarising
material; lenses (including contact lenses), prisms, mirrors and
other optical elements, of any material, unmounted, other than
such elements of glass not optically worked.
heading 02 - Lenses, prisms, mirrors and other optical elements, of any
material, mounted, being parts of or fittings for instruments or
apparatus, other than such elements of glass not optically
worked.
heading 03 - Frames and mountings for spectacles, goggles or the like, and
parts thereof.
heading 04 - Spectacles, goggles and the like, corrective, protective or other.
heading 05 - Binoculars, monoculars, other optical telescopes, and mountings
therefor; other astronomical instruments and mountings
therefor, but not including instruments for radio-astronomy.
heading 06 - Photographic (other than cinematographic) cameras;
photographic flashlight apparatus and flashbulbs other than
discharge lamps of heading 85.39.
heading 07 - Cinematographic cameras and projectors, whether or not
incorporating sound recording or reproducing apparatus.
heading 08 - Image projectors, other than cinematographic; photographic
(other than cinematographic) enlargers and reducers.
heading 10 - Apparatus and equipment for photographic (including
cinematographic) laboratories, not specified or included
elsewhere in this Chapter; negatoscopes; projection screens.
heading 11 - Compound optical microscopes, including those for
photomicrography, cinephotomicrography or microprojection
heading 12 - Microscopes other than optical microscopes; diffraction
apparatus.
heading 13 - Lasers, other than laser diodes; other optical appliances and
instruments, not specified or included elsewhere in this Chapter.
heading 14 - Direction finding compasses; other navigational instruments and
appliances.
heading 15 - Surveying (including photogrammetrical surveying),
hydrographic, oceanographic, hydrological, meteorological or
geophysical instruments and appliances, excluding compasses;
rangefinders.
heading 16 - Balances of a sensitivity of 5 cg or better, with or without weights.
heading 17 - Drawing, marking-out or mathematical calculating instruments
(for example, drafting machines, pantographs, protractors,
drawing sets, slide rules, disc calculators); instruments for
measuring length, for use in the hand (for example, measuring
rods and tapes, micrometers, callipers), not specified or included
elsewhere in this Chapter.
heading 18 - Instruments and appliances used in medical, surgical, dental or
veterinary sciences, including scintigraphic apparatus, other
electro-medical apparatus and sight-testing instruments.
heading 19 - Mechano-therapy appliances; massage apparatus; psychological
aptitude-testing apparatus; ozone therapy, oxygen therapy,
aerosol therapy, artificial respiration or other therapeutic
respiration apparatus.
heading 20 - Other breathing appliances and gas masks, excluding protective
masks having neither mechanical parts nor replaceable filters.
heading 21 - Orthopaedic appliances, including crutches, surgical belts and
trusses; splints and other fracture appliances; artificial parts of
the body; hearing aids and other appliances which are worn or
carried, or implanted in the body, to compensate for a defect or
disability.
heading 22 - Apparatus based on the use of X-rays or of alpha, beta, gamma
or other ionising radiations, whether or not for medical, surgical,
dental or veterinary uses, including radiography or radiotherapy
apparatus, X-ray tubes and other X-ray generators, high tension
generators, control panels and desks, screens, examination or
treatment tables, chairs and the like.
heading 23 - Instruments, apparatus and models, designed for
demonstrational purposes (for example, in education or
exhibitions), unsuitable for other uses.
heading 24 - Machines and appliances for testing the hardness, strength,
compressibility, elasticity or other mechanical properties of
materials (for example, metals, wood, textiles, paper, plastics).
heading 25 - Hydrometers and similar floating instruments, thermometers,
pyrometers, barometers, hygrometers and psychrometers,
recording or not, and any combination of these instruments.
heading 26 - Instruments and apparatus for measuring or checking the flow,
level, pressure or other variables of liquids or gases (for example,
flow meters, level gauges, manometers, heat meters), excluding
instruments and apparatus of heading 90.14, 90.15, 90.28 or
90.32.
heading 27 - Instruments and apparatus for physical or chemical analysis (for
example, polarimeters, refractometers, spectrometers, gas or
smoke analysis apparatus); instruments and apparatus for
measuring or checking viscosity, porosity, expansion, surface
tension or the like; instruments and apparatus for measuring or
checking quantities of heat, sound or light (including exposure
meters); microtomes.
heading 28 - Gas, liquid or electricity supply or production meters, including
calibrating meters therefor.
heading 29 - Revolution counters, production counters, taximeters,
mileometers, pedometers and the like; speed indicators and
tachometers, other than those of heading 90.14 or 90.15;
stroboscopes.
heading 30 - Oscilloscopes, spectrum analysers and other instruments and
apparatus for measuring or checking electrical quantities,
excluding meters of heading 90.28; instruments and apparatus
for measuring or detecting alpha, beta, gamma, X-ray, cosmic or
other ionising radiations.
heading 31 - Measuring or checking instruments, appliances and machines,
not specified or included elsewhere in this Chapter; profile
projectors.
heading 32 - Automatic regulating or cont rolling instruments and apparatus.
heading 33 - Parts and accessories (not specified or included elsewhere in this
Chapter) for machines, appliances, instruments or apparatus of
Chapter 90. | {"heading_id": "12"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: scrap paper pulp
These are the possible headings: heading 01 - Mechanical wood pulp.
heading 02 - Chemical wood pulp, dissolving grades.
heading 03 - Chemical wood pulp, soda or sulphate, other than dissolving
grades.
heading 04 - Chemical wood pulp, sulphite, other than dissolving grades.
heading 05 - Wood pulp obtained by a combination of mechanical and
chemical pulping processes.
heading 06 - Pulps of fibres derived from recovered (waste and scrap) paper
or paperboard or of other fibrous cellulosic material.
heading 07 - Recovered (waste and scrap) paper or paperboard. | {"heading_id": "06"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: electric solder tool
These are the possible headings: heading 01 - Electric motors and gene rators (excluding generating sets).
heading 02 - Electric generating sets and rotary converters.
heading 03 - Parts suitable for use solely or principally with the machines of
heading 85.01 or 85.02.
heading 04 - Electrical transformers, static converters (for example,
rectifiers) and inductors.
heading 05 - Electro-magnets; permanent magnets and articles intended to
become permanent magnets after magnetisation; electro-
magnetic or permanent magnet chucks, clamps and similar
holding devices; electro-magnetic couplings, clutches and
brakes; electro-magnetic lifting heads.
heading 06 - Primary cells and primary batteries.
heading 07 - Electric accumulators, including separators therefor, whether
or not rectangular (including square).
heading 08 - Vacuum cleaners.
heading 09 - Electro-mechanical domestic appliances, with self-contained
electric motor, other than vacuum cleaners of heading 85.08.
heading 10 - Shavers, hair clippers and hair-removing appliances, with self-
contained electric motor.
heading 11 - Electrical ignition or starting equipment of a kind used for
spark-ignition or compression-ignition internal combustion
engines (for example, ignition magnetos, magneto-dynamos,
ignition coils, sparking plugs and glow plugs, starter motors);
generators (for example, dynamos, alternators) and cut-outs of
a kind used in conjunction with such engines.
heading 12 - Electrical lighting or signalling equipment (excluding articles of
heading 85.39), windscreen wipers, defrosters and demisters, of
a kind used for cycles or motor vehicles.
heading 13 - Portable electric lamps designed to function by their own source
of energy (for example, dry batteries, accumulators, magnetos),
other than lighting equipment of heading 85.12.
heading 14 - Industrial or laboratory electric furnaces and ovens (including
those functioning by induction or dielectric loss); other
industrial or laboratory equipment for the heat treatment of
materials by induction or dielectric loss.
heading 15 - Electric (including electrically heated gas), laser or other light
or photon beam, ultrasonic, electron beam, magnetic pulse or
plasma arc soldering, brazing or welding machines and
apparatus, whether or not capable of cutting; electric machines
and apparatus for hot spraying of metals or cermets.
heading 16 - Electric instantaneous or storage water heaters and immersion
heaters; electric space heating apparatus and soil heating
apparatus; electro-thermic hair-dressing apparatus (for
example, hair dryers, hair curlers, curling tong heaters) and
hand dryers; electric smoothing irons; other electro-thermic
appliances of a kind used for domestic purposes; electric
heating resistors, other than those of heading 85.45.
heading 17 - Telephone sets, including smartphones and other telephones for
cellular networks or for other wireless networks; other
apparatus for the transmission or reception of voice, images or
other data, including apparatus for communication in a wired
or wireless network (such as a local or wide area network),
other than transmission or reception apparatus of
heading 84.43, 85.25, 85.27 or 85.28.
heading 18 - Microphones and stands therefor; loudspeakers, whether or not
mounted in their enclosures; headphones and earphones,
whether or not combined with a microphone, and sets consisting
of a microphone and one or more loudspeakers; audio-
frequency electric amplifiers; electric sound amplifier sets.
heading 19 - Sound recording or reproducing apparatus.
heading 21 - Video recording or reproducing apparatus, whether or not
incorporating a video tuner.
heading 22 - Parts and accessories suitable for use solely or principally with
the apparatus of heading 85.19 or 85.21.
heading 23 - Discs, tapes, solid-state non-volatile storage devices, “smart
cards” and other media for the recording of sound or of other
phenomena, whether or not recorded, including matrices and
masters for the production of discs, but excluding products of
Chapter 37.
heading 24 - Flat panel display modules, whether or not incorporating touch-
sensitive screens.
heading 25 - Transmission apparatus for radio-broadcasting or television,
whether or not incorporating reception apparatus or sound
recording or reproducing apparatus; television cameras, digital
cameras and video camera recorders.
heading 26 - Radar apparatus, radio navigational aid apparatus and radio
remote control apparatus.
heading 27 - Reception apparatus for radio-broadcasting, whether or not
combined, in the same housing, with sound recording or
reproducing apparatus or a clock.
heading 28 - Monitors and projectors, not incorporating television reception
apparatus; reception apparatus for television, whether or not
incorporating radio-broadcast receivers or sound or video
recording or reproducing apparatus.
heading 29 - Parts suitable for use solely or principally with the apparatus of
headings 85.24 to 85.28.
heading 30 - Electrical signalling, safety or traffic control equipment for
railways, tramways, roads, inland waterways, parking facilities,
port installations or airfields (other than those of
heading 86.08).
heading 31 - Electric sound or visual signalling apparatus (for example, bells,
sirens, indicator panels, burglar or fire alarms), other than
those of heading 85.12 or 85.30.
heading 32 - Electrical capacitors, fixed, variable or adjustable (pre -set).
heading 33 - Electrical resistors (including rheostats and potentiometers),
other than heating resistors.
heading 34 - Printed circuits.
heading 35 - Electrical apparatus for switching or protecting electrical
circuits, or for making connections to or in electrical circuits
(for example, switches, fuses, lightning arresters, voltage
limiters, surge suppressors, plugs and other connectors,
junction boxes), for a voltage exceeding 1,000 volts.
heading 36 - Electrical apparatus for switching or protecting electrical
circuits, or for making connections to or in electrical circuits
(for example, switches, relays, fuses, surge suppressors, plugs,
sockets, lamp-holders and other connectors, junction boxes), for
a voltage not exceeding 1,000 volts; connectors for optical
fibres, optical fibre bundles or cables.
heading 37 - Boards, panels, consoles, desks, cabinets and other bases,
equipped with two or more apparatus of heading 85.35 or 85.36,
for electric control or the distribution of electricity, including
those incorporating instruments or apparatus of Chapter 90,
and numerical control apparatus, other than switching
apparatus of heading 85.17.
heading 38 - Parts suitable for use solely or principally with the apparatus of
heading 85.35, 85.36 or 85.37.
heading 39 - Electric filament or discharge lamps, including sealed beam
lamp units and ultra-violet or infra-red lamps; arc-lamps; light-
emitting diode (LED) light sources.
heading 40 - Thermionic, cold cathode or photo-cathode valves and tubes
(for example, vacuum or vapour or gas filled valves and tubes,
mercury arc rectifying valves and tubes, cathode-ray tubes,
television camera tubes).
heading 41 - Semiconductor devices (for example, diodes, transistors,
semiconductor-based transducers); photosensitive
semiconductor devices, including photovoltaic cells whether or
not assembled in modules or made up into panels; light-
emitting diodes (LED), whether or not assembled with other
light-emitting diodes (LED); mounted piezo-electric crystals.
heading 42 - Electronic integrated circuits.
heading 43 - Electrical machines and apparatus, having individual functions,
not specified or included elsewhere in this Chapter.
heading 44 - Insulated (including enamelled or anodised) wire, cable
(including co-axial cable) and other insulated electric
conductors, whether or not fitted with connectors; optical fibre
cables, made up of individually sheathed fibres, whether or not
assembled with electric conductors or fitted with connectors.
heading 45 - Carbon electrodes, carbon brushes, lamp carbons, battery
carbons and other articles of graphite or other carbon, with or
without metal, of a kind used for electrical purposes.
heading 46 - Electrical insulators of any material.
heading 47 - Insulating fittings for electrical machines, appliances or
equipment, being fittings wholly of insulating material apart
from any minor components of metal (for example, threaded
sockets) incorporated during moulding solely for purposes of
assembly, other than insulators of heading 85.46; electrical
conduit tubing and joints therefor, of base metal lined with
insulating material.
heading 48 - Electrical parts of machinery or apparatus, not specified or
included elsewhere in this Chapter.
heading 49 - Electrical and electronic waste and scrap . | {"heading_id": "15"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: buy copper powders
These are the possible headings: heading 03 - Refined copper and copper alloys, unwrou ght.
heading 04 - Copper waste and scrap.
heading 05 - Master alloys of copper.
heading 06 - Copper powders and flakes.
heading 07 - Copper bars, rods and profiles.
heading 08 - Copper wire.
heading 09 - Copper plates, sheets and strip, of a thickness exceeding 0.15 mm.
heading 10 - Copper foil (whether or not printed or backed with paper,
paperboard, plastics or similar backing materials) of a thickness
(excluding any backing) not exceeding 0.15 mm.
heading 11 - Copper tubes and pipes.
heading 12 - Copper tube or pipe fittings (for example, couplings, elbows,
heading 13 - Stranded wire, cables, plaited bands and the like, of copper, not
electrically insulated.
heading 15 - Nails, tacks, drawing pins, staples (other than those of
heading 83.05) and similar articles, of copper or of iron or steel
with heads of copper; screws, bolts, nuts, screw hooks, rivets,
cotters, cotter-pins, washers (including spring washers) and
similar articles, of copper.
heading 18 - Table, kitchen or other household articles and parts thereof, of
copper; pot scourers and scouring or polishing pads, gloves and
the like, of copper; sanitary ware and parts thereof, of copper.
heading 19 - Other articles of copper. | {"heading_id": "06"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: cyclic alcohols info
These are the possible headings: heading 01 - Acyclic hydrocarbons .
heading 02 - Cyclic hydrocarbons .
heading 03 - Halogenated derivatives of hydrocarbons .
heading 04 - Sulphonated, nitrated or nitrosated derivatives of hydrocarbons,
heading 05 - Acyclic alcohols and their halogenated, sulphonated, nitrated or
heading 06 - Cyclic alcohols and their halogenated, sulphonated, nitrated or
heading 07 - Phenols; phenol -alcohols .
heading 08 - Halogenated, sulphonated, nitrated or nitrosated derivatives of
heading 09 - Ethers, ether -alcohols, ether -phenols, ether -alcohol -phenols,
heading 10 - Epoxides, epoxyalcohols, epoxyphenols and epoxyethers, with a
heading 12 - Aldehydes, whether or not with other oxygen function; cyclic
heading 15 - Saturated acyclic monocarboxylic acids and their anhydrides,
heading 16 - Unsaturated acyclic monocarboxylic acids, cyclic monocarboxylic
heading 17 - Polycarboxylic acids, their anhydrides, halides, peroxides and
heading 18 - Carboxylic acids with additional oxygen function and their
heading 19 - Phosphoric esters and their salts, including lactophosphates;
heading 20 - Esters of other inorganic acids of non -metals (excluding esters
heading 21 - Amine -function compounds.
heading 22 - Oxygen -function amino -compounds.
heading 23 - Quaternary ammonium salts and hydroxides; lecithins and
heading 24 - Carboxyamide -function compounds; amide -function compounds
heading 25 - Carboxyimide -function compounds (including saccharin and its
heading 26 - Nitrile -function compounds.
heading 30 - Organo -sulphur compounds.
heading 31 - Other organo -inorganic compounds .
heading 32 - Heterocyclic compounds with oxygen hetero -atom(s) only.
heading 33 - Heterocyclic compounds with nitrogen hetero -atom(s) only.
heading 34 - Nucleic acids and their salts, whether or not chemically defined;
heading 35 - Sulphonamides.
heading 36 - Provitamins and vitamins, natural or reproduced by synthesis
heading 37 - Hormones, prostaglandins, thromboxanes and leukotrienes,
heading 38 - Glycosides, natural or reproduced by synthesis, and their salts,
heading 39 - Alkaloids, natural or reproduced by synthesis, and their salts, | {"heading_id": "06"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: unpolished diamonds
These are the possible headings: heading 01 - Pearls, natural or cultured, whether or not worked or graded but
not strung, mounted or set; pearls, natural or cultured,
temporarily strung for convenience of transport.
heading 02 - Diamonds, whether or not worked, but not mounted or set.
heading 03 - Precious stones (other than diamonds) and semi-precious stones,
whether or not worked or graded but not strung, mounted or set;
ungraded precious stones (other than diamonds) and semi-
precious stones, temporarily strung for convenience of transport.
heading 04 - Synthetic or reconstructed precious or semi-precious stones,
whether or not worked or graded but not strung, mounted or set;
ungraded synthetic or reconstructed precious or semi-precious
stones, temporarily strung for convenience of transport.
heading 05 - Dust and powder of natural or synthetic precious or semi-
precious stones.
heading 06 - Silver (including silver plated with gold or platinum), unwrought
or in semi-manufactured forms, or in powder form.
heading 07 - Base metals clad with silver, not further worked than semi-
manufactured.
heading 08 - Gold (including gold plated with platinum) unwrought or in
semi-manufactured forms, or in powder form.
heading 09 - Base metals or silver, clad with gold, not further worked than
semi-manufactured.
heading 10 - Platinum, unwrought or in semi-manufactured forms, or in
powder form.
heading 11 - Base metals, silver or gold, clad with platinum, not further
worked than semi-manufactured.
heading 12 - Waste and scrap of precious metal or of metal clad with
precious metal; other waste and scrap containing precious
metal or precious metal compounds, of a kind used principally
for the recovery of precious metal other than goods of
heading 85.49.
heading 13 - Articles of jewellery and parts thereof, of precious metal or of
metal clad with precious metal.
heading 14 - Articles of goldsmiths' or silversmiths' wares and parts thereof,
of precious metal or of metal clad with precious metal.
heading 15 - Other articles of precious metal or of metal clad with precious
metal.
heading 16 - Articles of natural or cultured pearls, precious or semi-precious
stones (natural, synthetic or reconstructed).
heading 17 - Imitation jewellery.
heading 18 - Coin. | {"heading_id": "04"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: aluminum steel mix
These are the possible headings: heading 01 - Unwrought aluminium.
heading 02 - Aluminium waste and scrap.
heading 03 - Aluminium powders and flakes.
heading 04 - Aluminium bars, rods and profiles.
heading 05 - Aluminium wire.
heading 06 - Aluminium plates, sheets and strip, of a thickness exceeding
0.2 mm.
heading 07 - Aluminium foil (whether or not printed or backed with paper,
paperboard, plastics or similar backing materials) of a thickness
(excluding any backing) not exceeding 0.2 mm.
heading 08 - Aluminium tubes and pipes.
heading 09 - Aluminium tube or pipe fittings (for example, couplings, elbows,
sleeves).
heading 10 - Aluminium structures (excluding prefabricated buildings of
heading 94.06) and parts of structures (for example, bridges and
bridge-sections, towers, lattice masts, roofs, roofing frameworks,
doors and windows and their frames and thresholds for doors,
balustrades, pillars and columns); aluminium plates, rods,
profiles, tubes and the like, prepared for use in structures.
heading 11 - Aluminium reservoirs, tanks, vats and similar containers, for any
material (other than compressed or liquefied gas), of a capacity
exceeding 300 l, whether or not lined or heat-insulated, but not
fitted with mechanical or thermal equipment.
heading 12 - Aluminium casks, drums, cans, boxes and similar containers
(including rigid or collapsible tubular containers), for any
material (other than compressed or liquefied gas), of a capacity
not exceeding 300 l, whether or not lined or heat-insulated, but
not fitted with mechanical or thermal equipment.
heading 13 - Aluminium containers for compressed or liquefied gas.
heading 14 - Stranded wire, cables, plaited bands and the like, of aluminium,
not electrically insulated.
heading 15 - Table, kitchen or other household articles and parts thereof, of
aluminium; pot scourers and scouring or polishing pads, gloves
and the like, of aluminium; sanitary ware and parts thereof, of
aluminium.
heading 16 - Other articles of aluminium. | {"heading_id": "14"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: small drdger
These are the possible headings: heading 01 - Cruise ships, excursion boats, ferry-boats, cargo ships, barges
and similar vessels for the transport of persons or goods.
heading 02 - Fishing vessels; factory ships and other vessels for processing or
preserving fishery products.
heading 03 - Yachts and other vessels for pleasure or sports; rowing boats
and canoes.
heading 04 - Tugs and pusher craft.
heading 05 - Light-vessels, fire-floats, dredgers, floating cranes and other
vessels the navigability of which is subsidiary to their main
function; floating docks; floating or submersible drilling or
production platforms.
heading 06 - Other vessels, including warships and lifeboats other than
rowing boats.
heading 07 - Other floating structures (for example, rafts, tanks, coffer-
dams, landing-stages, buoys and beacons).
heading 08 - Vessels and other floating structures for breaking up. | {"heading_id": "05"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: dvd recorder
These are the possible headings: heading 01 - Electric motors and gene rators (excluding generating sets).
heading 02 - Electric generating sets and rotary converters.
heading 03 - Parts suitable for use solely or principally with the machines of
heading 85.01 or 85.02.
heading 04 - Electrical transformers, static converters (for example,
rectifiers) and inductors.
heading 05 - Electro-magnets; permanent magnets and articles intended to
become permanent magnets after magnetisation; electro-
magnetic or permanent magnet chucks, clamps and similar
holding devices; electro-magnetic couplings, clutches and
brakes; electro-magnetic lifting heads.
heading 06 - Primary cells and primary batteries.
heading 07 - Electric accumulators, including separators therefor, whether
or not rectangular (including square).
heading 08 - Vacuum cleaners.
heading 09 - Electro-mechanical domestic appliances, with self-contained
electric motor, other than vacuum cleaners of heading 85.08.
heading 10 - Shavers, hair clippers and hair-removing appliances, with self-
contained electric motor.
heading 11 - Electrical ignition or starting equipment of a kind used for
spark-ignition or compression-ignition internal combustion
engines (for example, ignition magnetos, magneto-dynamos,
ignition coils, sparking plugs and glow plugs, starter motors);
generators (for example, dynamos, alternators) and cut-outs of
a kind used in conjunction with such engines.
heading 12 - Electrical lighting or signalling equipment (excluding articles of
heading 85.39), windscreen wipers, defrosters and demisters, of
a kind used for cycles or motor vehicles.
heading 13 - Portable electric lamps designed to function by their own source
of energy (for example, dry batteries, accumulators, magnetos),
other than lighting equipment of heading 85.12.
heading 14 - Industrial or laboratory electric furnaces and ovens (including
those functioning by induction or dielectric loss); other
industrial or laboratory equipment for the heat treatment of
materials by induction or dielectric loss.
heading 15 - Electric (including electrically heated gas), laser or other light
or photon beam, ultrasonic, electron beam, magnetic pulse or
plasma arc soldering, brazing or welding machines and
apparatus, whether or not capable of cutting; electric machines
and apparatus for hot spraying of metals or cermets.
heading 16 - Electric instantaneous or storage water heaters and immersion
heaters; electric space heating apparatus and soil heating
apparatus; electro-thermic hair-dressing apparatus (for
example, hair dryers, hair curlers, curling tong heaters) and
hand dryers; electric smoothing irons; other electro-thermic
appliances of a kind used for domestic purposes; electric
heating resistors, other than those of heading 85.45.
heading 17 - Telephone sets, including smartphones and other telephones for
cellular networks or for other wireless networks; other
apparatus for the transmission or reception of voice, images or
other data, including apparatus for communication in a wired
or wireless network (such as a local or wide area network),
other than transmission or reception apparatus of
heading 84.43, 85.25, 85.27 or 85.28.
heading 18 - Microphones and stands therefor; loudspeakers, whether or not
mounted in their enclosures; headphones and earphones,
whether or not combined with a microphone, and sets consisting
of a microphone and one or more loudspeakers; audio-
frequency electric amplifiers; electric sound amplifier sets.
heading 19 - Sound recording or reproducing apparatus.
heading 21 - Video recording or reproducing apparatus, whether or not
incorporating a video tuner.
heading 22 - Parts and accessories suitable for use solely or principally with
the apparatus of heading 85.19 or 85.21.
heading 23 - Discs, tapes, solid-state non-volatile storage devices, “smart
cards” and other media for the recording of sound or of other
phenomena, whether or not recorded, including matrices and
masters for the production of discs, but excluding products of
Chapter 37.
heading 24 - Flat panel display modules, whether or not incorporating touch-
sensitive screens.
heading 25 - Transmission apparatus for radio-broadcasting or television,
whether or not incorporating reception apparatus or sound
recording or reproducing apparatus; television cameras, digital
cameras and video camera recorders.
heading 26 - Radar apparatus, radio navigational aid apparatus and radio
remote control apparatus.
heading 27 - Reception apparatus for radio-broadcasting, whether or not
combined, in the same housing, with sound recording or
reproducing apparatus or a clock.
heading 28 - Monitors and projectors, not incorporating television reception
apparatus; reception apparatus for television, whether or not
incorporating radio-broadcast receivers or sound or video
recording or reproducing apparatus.
heading 29 - Parts suitable for use solely or principally with the apparatus of
headings 85.24 to 85.28.
heading 30 - Electrical signalling, safety or traffic control equipment for
railways, tramways, roads, inland waterways, parking facilities,
port installations or airfields (other than those of
heading 86.08).
heading 31 - Electric sound or visual signalling apparatus (for example, bells,
sirens, indicator panels, burglar or fire alarms), other than
those of heading 85.12 or 85.30.
heading 32 - Electrical capacitors, fixed, variable or adjustable (pre -set).
heading 33 - Electrical resistors (including rheostats and potentiometers),
other than heating resistors.
heading 34 - Printed circuits.
heading 35 - Electrical apparatus for switching or protecting electrical
circuits, or for making connections to or in electrical circuits
(for example, switches, fuses, lightning arresters, voltage
limiters, surge suppressors, plugs and other connectors,
junction boxes), for a voltage exceeding 1,000 volts.
heading 36 - Electrical apparatus for switching or protecting electrical
circuits, or for making connections to or in electrical circuits
(for example, switches, relays, fuses, surge suppressors, plugs,
sockets, lamp-holders and other connectors, junction boxes), for
a voltage not exceeding 1,000 volts; connectors for optical
fibres, optical fibre bundles or cables.
heading 37 - Boards, panels, consoles, desks, cabinets and other bases,
equipped with two or more apparatus of heading 85.35 or 85.36,
for electric control or the distribution of electricity, including
those incorporating instruments or apparatus of Chapter 90,
and numerical control apparatus, other than switching
apparatus of heading 85.17.
heading 38 - Parts suitable for use solely or principally with the apparatus of
heading 85.35, 85.36 or 85.37.
heading 39 - Electric filament or discharge lamps, including sealed beam
lamp units and ultra-violet or infra-red lamps; arc-lamps; light-
emitting diode (LED) light sources.
heading 40 - Thermionic, cold cathode or photo-cathode valves and tubes
(for example, vacuum or vapour or gas filled valves and tubes,
mercury arc rectifying valves and tubes, cathode-ray tubes,
television camera tubes).
heading 41 - Semiconductor devices (for example, diodes, transistors,
semiconductor-based transducers); photosensitive
semiconductor devices, including photovoltaic cells whether or
not assembled in modules or made up into panels; light-
emitting diodes (LED), whether or not assembled with other
light-emitting diodes (LED); mounted piezo-electric crystals.
heading 42 - Electronic integrated circuits.
heading 43 - Electrical machines and apparatus, having individual functions,
not specified or included elsewhere in this Chapter.
heading 44 - Insulated (including enamelled or anodised) wire, cable
(including co-axial cable) and other insulated electric
conductors, whether or not fitted with connectors; optical fibre
cables, made up of individually sheathed fibres, whether or not
assembled with electric conductors or fitted with connectors.
heading 45 - Carbon electrodes, carbon brushes, lamp carbons, battery
carbons and other articles of graphite or other carbon, with or
without metal, of a kind used for electrical purposes.
heading 46 - Electrical insulators of any material.
heading 47 - Insulating fittings for electrical machines, appliances or
equipment, being fittings wholly of insulating material apart
from any minor components of metal (for example, threaded
sockets) incorporated during moulding solely for purposes of
assembly, other than insulators of heading 85.46; electrical
conduit tubing and joints therefor, of base metal lined with
insulating material.
heading 48 - Electrical parts of machinery or apparatus, not specified or
included elsewhere in this Chapter.
heading 49 - Electrical and electronic waste and scrap . | {"heading_id": "21"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: knitted bright colors
These are the possible headings: heading 01 - Pile fabrics, including “long pile” fabrics and terry fabrics,
knitted or crocheted.
heading 02 - Knitted or crocheted fabrics of a width not exceeding 30 cm,
containing by weight 5 % or more of elastomeric yarn or
rubber thread, other than those of heading 60.01.
heading 03 - Knitted or crocheted fabrics of a width not exceeding 30 cm,
other than those of heading 60.01 or 60.02.
heading 04 - Knitted or crocheted fabrics of a width exceeding 30 cm,
containing by weight 5 % or more of elastomeric yarn or
rubber thread, other than those of heading 60.01.
heading 05 - Warp knit fabrics (including those made on galloon knitting
machines), other than those of headings 60.01 to 60.04.
heading 06 - Other knitted or crocheted fabrics. | {"heading_id": "06"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: hide processing eqpmnt
These are the possible headings: heading 01 - Nuclear reactors; fuel elements (cartridges), non-irradiated, for
nuclear reactors; machinery and apparatus for isotopic
separation.
heading 02 - Steam or other vapour generating boilers (other than central
heating hot water boilers capable also of producing low pressure
steam); super-heated water boilers.
heading 03 - Central heating boilers other than those of heading 84.02.
heading 04 - Auxiliary plant for use with boilers of heading 84.02 or 84.03 (for
example, economisers, super-heaters, soot removers, gas
recoverers); condensers for steam or other vapour power units.
heading 05 - Producer gas or water gas generators, with or without their
purifiers; acetylene gas generators and similar water process gas
generators, with or without their purifiers.
heading 06 - Steam turbines and other vapour turbines.
heading 07 - Spark-ignition reciprocating or rotary internal combustion
piston engines.
heading 08 - Compression-ignition internal combustion piston engines (diesel
or semi-diesel engines).
heading 09 - Parts suitable for use solely or principally with the engines of
heading 84.07 or 84.08.
heading 10 - Hydraulic turbines, water wheels, and regulators therefor.
heading 11 - Turbo -jets, turbo -propellers and other gas turbines.
heading 12 - Othe r engines and motors.
heading 13 - Pumps for liquids, whether or not fitted with a measuring device;
liquid elevators.
heading 14 - Air or vacuum pumps, air or other gas compressors and fans;
ventilating or recycling hoods incorporating a fan, whether or not
fitted with filters; gas-tight biological safety cabinets, whether
or not fitted with filters.
heading 15 - Air conditioning machines, comprising a motor-driven fan and
elements for changing the temperature and humidity, including
those machines in which the humidity cannot be separately
regulated.
heading 16 - Furnace burners for liquid fuel, for pulverised solid fuel or for
gas; mechanical stokers, including their mechanical grates,
mechanical ash dischargers and similar appliances.
heading 17 - Industrial or laboratory furnaces and ovens, including
incinerators, non-electric.
heading 18 - Refrigerators, freezers and other refrigerating or freezing
equipment, electric or other; heat pumps other than air
conditioning machines of heading 84.15.
heading 19 - Machinery, plant or laboratory equipment, whether or not
electrically heated (excluding furnaces, ovens and other
equipment of heading 85.14), for the treatment of materials by a
process involving a change of temperature such as heating,
cooking, roasting, distilling, rectifying, sterilising, pasteurising,
steaming, drying, evaporating, vaporising, condensing or cooling,
other than machinery or plant of a kind used for domestic
purposes; instantaneous or storage water heaters, non-electric.
heading 20 - Calendering or other rolling machines, other than for metals or
glass, and cylinders therefor.
heading 21 - Centrifuges, including centrifugal dryers; filtering or purifying
machinery and apparatus, for liquids or gases.
heading 22 - Dish washing machines; machinery for cleaning or drying bottles
or other containers; machinery for filling, closing, sealing or
labelling bottles, cans, boxes, bags or other containers; machinery
for capsuling bottles, jars, tubes and similar containers; other
packing or wrapping machinery (including heat-shrink wrapping
machinery); machinery for aerating beverages.
heading 23 - Weighing machinery (excluding balances of a sensitivity of 5 cg
or better), including weight operated counting or checking
machines; weighing machine weights of all kinds.
heading 24 - Mechanical appliances (whether or not hand-operated) for
projecting, dispersing or spraying liquids or powders; fire
extinguishers, whether or not charged; spray guns and similar
appliances; steam or sand blasting machines and similar jet
projecting machines.
heading 25 - Pulley tackle and hoists other than skip hoists; winches and
capstans; jacks.
heading 26 - Ships' derricks; cranes, including cable cranes; mobile lifting
frames, straddle carriers and works trucks fitted with a crane.
heading 27 - Fork-lift trucks; other works trucks fitted with lifting or handling
equipment.
heading 28 - Other lifting, handling, loading or unloading machinery (for
example, lifts, escalators, conveyors, teleferics).
heading 29 - Self-propelled bulldozers, angledozers, graders, levellers,
scrapers, mechanical shovels, excavators, shovel loaders, tamping
machines and road rollers.
heading 30 - Other moving, grading, levelling, scraping, excavating, tamping,
compacting, extracting or boring machinery, for earth, minerals
or ores; pile-drivers and pile-extractors; snow-ploughs and snow-
blowers.
heading 31 - Parts suitable for use solely or principally with the machinery of
headings 84.25 to 84.30.
heading 32 - Agricultural, horticultural or forestry machinery for soil
preparation or cultivation; lawn or sports-ground rollers.
heading 33 - Harvesting or threshing machinery, including straw or fodder
balers; grass or hay mowers; machines for cleaning, sorting or
grading eggs, fruit or other agricultural produce, other than
machinery of heading 84.37.
heading 34 - Milking machines and dairy ma chinery.
heading 35 - Presses, crushers and similar machinery used in the manufacture
of wine, cider, fruit juices or similar beverages.
heading 36 - Other agricultural, horticultural, forestry, poultry-keeping or
bee-keeping machinery, including germination plant fitted with
mechanical or thermal equipment; poultry incubators and
brooders.
heading 37 - Machines for cleaning, sorting or grading seed, grain or dried
leguminous vegetables; machinery used in the milling industry or
for the working of cereals or dried leguminous vegetables, other
than farm-type machinery.
heading 38 - Machinery, not specified or included elsewhere in this Chapter,
for the industrial preparation or manufacture of food or drink,
other than machinery for the extraction or preparation of
animal or fixed vegetable or microbial fats or oils.
heading 39 - Machinery for making pulp of fibrous cellulosic material or for
making or finishing paper or paperboard.
heading 40 - Book -binding machinery, including book -sewing machines.
heading 41 - Other machinery for making up paper pulp, paper or
paperboard, including cutting machines of all kinds.
heading 42 - Machinery, apparatus and equipment (other than the machines
of headings 84.56 to 84.65) for preparing or making plates,
cylinders or other printing components; plates, cylinders and
other printing components; plates, cylinders and lithographic
stones, prepared for printing purposes (for example, planed,
grained or polished).
heading 43 - Printing machinery used for printing by means of plates,
cylinders and other printing components of heading 84.42;
other printers, copying machines and facsimile machines,
whether or not combined; parts and accessories thereof.
heading 44 - Machines for extruding, drawing, texturing or cutting man-
made textile materials.
heading 45 - Machines for preparing textile fibres; spinning, doubling or
twisting machines and other machinery for producing textile
yarns; textile reeling or winding (including weft-winding)
machines and machines for preparing textile yarns for use on
the machines of heading 84.46 or 84.47.
heading 46 - Weaving machines (looms).
heading 47 - Knitting machines, stitch-bonding machines and machines for
making gimped yarn, tulle, lace, embroidery, trimmings, braid
or net and machines for tufting.
heading 48 - Auxiliary machinery for use with machines of heading 84.44,
84.45, 84.46 or 84.47 (for example, dobbies, Jacquards,
automatic stop motions, shuttle changing mechanisms); parts
and accessories suitable for use solely or principally with the
machines of this heading or of heading 84.44, 84.45, 84.46 or
84.47 (for example, spindles and spindle flyers, card clothing,
combs, extruding nipples, shuttles, healds and heald-frames,
hosiery needles).
heading 49 - Machinery for the manufacture or finishing of felt or
nonwovens in the piece or in shapes, including machinery for
making felt hats; blocks for making hats.
heading 50 - Household or laundry-type washing machines, including
machines which both wash and dry.
heading 51 - Machinery (other than machines of heading 84.50) for washing,
cleaning, wringing, drying, ironing, pressing (including fusing
presses), bleaching, dyeing, dressing, finishing, coating or
impregnating textile yarns, fabrics or made up textile articles
and machines for applying the paste to the base fabric or other
support used in the manufacture of floor coverings such as
linoleum; machines for reeling, unreeling, folding, cutting or
pinking textile fabrics.
heading 52 - Sewing machines, other than book-sewing machines of
heading 84.40; furniture, bases and covers specially designed
for sewing machines; sewing machine needles.
heading 53 - Machinery for preparing, tanning or working hides, skins or
leather or for making or repairing footwear or other articles of
hides, skins or leather, other than sewing machines.
heading 54 - Converters, ladles, ingot moulds and casting machines, of a kind
used in metallurgy or in metal foundries.
heading 55 - Metal -rolling mills and rolls therefor.
heading 56 - Machine-tools for working any material by removal of material,
by laser or other light or photon beam, ultrasonic, electro-
discharge, electro-chemical, electron beam, ionic-beam or
plasma arc processes; water-jet cutting machines.
heading 57 - Machining centres, unit construction machines (single station)
and multi-station transfer machines, for working metal.
heading 58 - Lathes (including turning centres) for removing metal.
heading 59 - Machine-tools (including way-type unit head machines) for
drilling, boring, milling, threading or tapping by removing
metal, other than lathes (including turning centres) of
heading 84.58.
heading 60 - Machine-tools for deburring, sharpening, grinding, honing,
lapping, polishing or otherwise finishing metal or cermets by
means of grinding stones, abrasives or polishing products, other
than gear cutting, gear grinding or gear finishing machines of
heading 84.61.
heading 61 - Machine-tools for planing, shaping, slotting, broaching, gear
cutting, gear grinding or gear finishing, sawing, cutting-off and
other machine-tools working by removing metal or cermets, not
elsewhere specified or included.
heading 62 - Machine-tools (including presses) for working metal by forging,
hammering or die forging (excluding rolling mills);
machine-tools (including presses, slitting lines and cut-to-length
lines) for working metal by bending, folding, straightening,
flattening, shearing, punching, notching or nibbling (excluding
draw-benches); presses for working metal or metal carbides,
not specified above.
heading 63 - Other machine-tools for working metal or cermets, without
removing material.
heading 64 - Machine-tools for working stone, ceramics, concrete, asbestos-
cement or like mineral materials or for cold working glass
heading 65 - Machine-tools (including machines for nailing, stapling, glueing
or otherwise assembling) for working wood, cork, bone, hard
rubber, hard plastics or similar hard materials.
heading 66 - Parts and accessories suitable for use solely or principally with
the machines of headings 84.56 to 84.65, including work or tool
holders, self-opening dieheads, dividing heads and other special
attachments for the machines; tool holders for any type of tool
for working in the hand.
heading 67 - Tools for working in the hand, pneumatic, hydraulic or with
self-contained electric or non-electric motor.
heading 68 - Machinery and apparatus for soldering, brazing or welding,
whether or not capable of cutting, other than those of
heading 85.15; gas-operated surface tempering machines and
appliances.
heading 70 - Calculating machines and pocket-size data recording,
reproducing and displaying machines with calculating
functions; accounting machines, postage-franking machines,
ticket-issuing machines and similar machines, incorporating a
calculating device; cash registers.
heading 71 - Automatic data processing machines and units thereof;
magnetic or optical readers, machines for transcribing data
onto data media in coded form and machines for processing
such data, not elsewhere specified or included.
heading 72 - Other office machines (for example, hectograph or stencil
duplicating machines, addressing machines, automatic
banknote dispensers, coin-sorting machines, coin-counting or
wrapping machines, pencil-sharpening machines, perforating or
stapling machines).
heading 73 - Parts and accessories (other than covers, carrying cases and the
like) suitable for use solely or principally with machines of
headings 84.70 to 84.72.
heading 74 - Machinery for sorting, screening, separating, washing,
crushing, grinding, mixing or kneading earth, stone, ores or
other mineral substances, in solid (including powder or paste)
form; machinery for agglomerating, shaping or moulding solid
mineral fuels, ceramic paste, unhardened cements, plastering
materials or other mineral products in powder or paste form;
machines for forming foundry moulds of sand.
heading 75 - Machines for assembling electric or electronic lamps, tubes or
valves or flashbulbs, in glass envelopes; machines for
manufacturing or hot working glass or glassware.
heading 76 - Automatic goods-vending machines (for example, postage
stamp, cigarette, food or beverage machines), including money-
changing machines.
heading 77 - Machinery for working rubber or plastics or for the
manufacture of products from these materials, not specified or
included elsewhere in this Chapter.
heading 78 - Machinery for preparing or making up tobacco, not specified or
included elsewhere in this Chapter.
heading 79 - Machines and mechanical appliances having individual
functions, not specified or included elsewhere in this Chapter.
heading 80 - Moulding boxes for metal foundry; mould bases; moulding
patterns; moulds for metal (other than ingot moulds), metal
carbides, glass, mineral materials, rubber or plastics.
heading 81 - Taps, cocks, valves and similar appliances for pipes, boiler
shells, tanks, vats or the like, including pressure-reducing valves
and thermostatically controlled valves.
heading 82 - Ball or roller bearings.
heading 83 - Transmission shafts (including cam shafts and crank shafts)
and cranks; bearing housings and plain shaft bearings; gears
and gearing; ball or roller screws; gear boxes and other speed
changers, including torque converters; flywheels and pulleys,
including pulley blocks; clutches and shaft couplings (including
universal joints).
heading 84 - Gaskets and similar joints of metal sheeting combined with
other material or of two or more layers of metal; sets or
assortments of gaskets and similar joints, dissimilar in
composition, put up in pouches, envelopes or similar packings;
mechanical seals.
heading 85 - Mac hines for additive manufacturing.
heading 86 - Machines and apparatus of a kind used solely or principally for
the manufacture of semiconductor boules or wafers,
semiconductor devices, electronic integrated circuits or flat
panel displays; machines and apparatus specified in Note 11 (C)
to this Chapter; parts and accessories.
heading 87 - Machinery parts, not containing electrical connectors,
insulators, coils, contacts or other electrical features, not
specified or included elsewhere in this Chapter. | {"heading_id": "53"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: phenothiazine compound
These are the possible headings: heading 01 - Acyclic hydrocarbons .
heading 02 - Cyclic hydrocarbons .
heading 03 - Halogenated derivatives of hydrocarbons .
heading 04 - Sulphonated, nitrated or nitrosated derivatives of hydrocarbons,
heading 05 - Acyclic alcohols and their halogenated, sulphonated, nitrated or
heading 06 - Cyclic alcohols and their halogenated, sulphonated, nitrated or
heading 07 - Phenols; phenol -alcohols .
heading 08 - Halogenated, sulphonated, nitrated or nitrosated derivatives of
heading 09 - Ethers, ether -alcohols, ether -phenols, ether -alcohol -phenols,
heading 10 - Epoxides, epoxyalcohols, epoxyphenols and epoxyethers, with a
heading 12 - Aldehydes, whether or not with other oxygen function; cyclic
heading 15 - Saturated acyclic monocarboxylic acids and their anhydrides,
heading 16 - Unsaturated acyclic monocarboxylic acids, cyclic monocarboxylic
heading 17 - Polycarboxylic acids, their anhydrides, halides, peroxides and
heading 18 - Carboxylic acids with additional oxygen function and their
heading 19 - Phosphoric esters and their salts, including lactophosphates;
heading 20 - Esters of other inorganic acids of non -metals (excluding esters
heading 21 - Amine -function compounds.
heading 22 - Oxygen -function amino -compounds.
heading 23 - Quaternary ammonium salts and hydroxides; lecithins and
heading 24 - Carboxyamide -function compounds; amide -function compounds
heading 25 - Carboxyimide -function compounds (including saccharin and its
heading 26 - Nitrile -function compounds.
heading 30 - Organo -sulphur compounds.
heading 31 - Other organo -inorganic compounds .
heading 32 - Heterocyclic compounds with oxygen hetero -atom(s) only.
heading 33 - Heterocyclic compounds with nitrogen hetero -atom(s) only.
heading 34 - Nucleic acids and their salts, whether or not chemically defined;
heading 35 - Sulphonamides.
heading 36 - Provitamins and vitamins, natural or reproduced by synthesis
heading 37 - Hormones, prostaglandins, thromboxanes and leukotrienes,
heading 38 - Glycosides, natural or reproduced by synthesis, and their salts,
heading 39 - Alkaloids, natural or reproduced by synthesis, and their salts, | {"heading_id": "34"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: silver earrings
These are the possible headings: heading 01 - Pearls, natural or cultured, whether or not worked or graded but
not strung, mounted or set; pearls, natural or cultured,
temporarily strung for convenience of transport.
heading 02 - Diamonds, whether or not worked, but not mounted or set.
heading 03 - Precious stones (other than diamonds) and semi-precious stones,
whether or not worked or graded but not strung, mounted or set;
ungraded precious stones (other than diamonds) and semi-
precious stones, temporarily strung for convenience of transport.
heading 04 - Synthetic or reconstructed precious or semi-precious stones,
whether or not worked or graded but not strung, mounted or set;
ungraded synthetic or reconstructed precious or semi-precious
stones, temporarily strung for convenience of transport.
heading 05 - Dust and powder of natural or synthetic precious or semi-
precious stones.
heading 06 - Silver (including silver plated with gold or platinum), unwrought
or in semi-manufactured forms, or in powder form.
heading 07 - Base metals clad with silver, not further worked than semi-
manufactured.
heading 08 - Gold (including gold plated with platinum) unwrought or in
semi-manufactured forms, or in powder form.
heading 09 - Base metals or silver, clad with gold, not further worked than
semi-manufactured.
heading 10 - Platinum, unwrought or in semi-manufactured forms, or in
powder form.
heading 11 - Base metals, silver or gold, clad with platinum, not further
worked than semi-manufactured.
heading 12 - Waste and scrap of precious metal or of metal clad with
precious metal; other waste and scrap containing precious
metal or precious metal compounds, of a kind used principally
for the recovery of precious metal other than goods of
heading 85.49.
heading 13 - Articles of jewellery and parts thereof, of precious metal or of
metal clad with precious metal.
heading 14 - Articles of goldsmiths' or silversmiths' wares and parts thereof,
of precious metal or of metal clad with precious metal.
heading 15 - Other articles of precious metal or of metal clad with precious
metal.
heading 16 - Articles of natural or cultured pearls, precious or semi-precious
stones (natural, synthetic or reconstructed).
heading 17 - Imitation jewellery.
heading 18 - Coin. | {"heading_id": "14"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: cordless hair clipper
These are the possible headings: heading 01 - Electric motors and gene rators (excluding generating sets).
heading 02 - Electric generating sets and rotary converters.
heading 03 - Parts suitable for use solely or principally with the machines of
heading 85.01 or 85.02.
heading 04 - Electrical transformers, static converters (for example,
rectifiers) and inductors.
heading 05 - Electro-magnets; permanent magnets and articles intended to
become permanent magnets after magnetisation; electro-
magnetic or permanent magnet chucks, clamps and similar
holding devices; electro-magnetic couplings, clutches and
brakes; electro-magnetic lifting heads.
heading 06 - Primary cells and primary batteries.
heading 07 - Electric accumulators, including separators therefor, whether
or not rectangular (including square).
heading 08 - Vacuum cleaners.
heading 09 - Electro-mechanical domestic appliances, with self-contained
electric motor, other than vacuum cleaners of heading 85.08.
heading 10 - Shavers, hair clippers and hair-removing appliances, with self-
contained electric motor.
heading 11 - Electrical ignition or starting equipment of a kind used for
spark-ignition or compression-ignition internal combustion
engines (for example, ignition magnetos, magneto-dynamos,
ignition coils, sparking plugs and glow plugs, starter motors);
generators (for example, dynamos, alternators) and cut-outs of
a kind used in conjunction with such engines.
heading 12 - Electrical lighting or signalling equipment (excluding articles of
heading 85.39), windscreen wipers, defrosters and demisters, of
a kind used for cycles or motor vehicles.
heading 13 - Portable electric lamps designed to function by their own source
of energy (for example, dry batteries, accumulators, magnetos),
other than lighting equipment of heading 85.12.
heading 14 - Industrial or laboratory electric furnaces and ovens (including
those functioning by induction or dielectric loss); other
industrial or laboratory equipment for the heat treatment of
materials by induction or dielectric loss.
heading 15 - Electric (including electrically heated gas), laser or other light
or photon beam, ultrasonic, electron beam, magnetic pulse or
plasma arc soldering, brazing or welding machines and
apparatus, whether or not capable of cutting; electric machines
and apparatus for hot spraying of metals or cermets.
heading 16 - Electric instantaneous or storage water heaters and immersion
heaters; electric space heating apparatus and soil heating
apparatus; electro-thermic hair-dressing apparatus (for
example, hair dryers, hair curlers, curling tong heaters) and
hand dryers; electric smoothing irons; other electro-thermic
appliances of a kind used for domestic purposes; electric
heating resistors, other than those of heading 85.45.
heading 17 - Telephone sets, including smartphones and other telephones for
cellular networks or for other wireless networks; other
apparatus for the transmission or reception of voice, images or
other data, including apparatus for communication in a wired
or wireless network (such as a local or wide area network),
other than transmission or reception apparatus of
heading 84.43, 85.25, 85.27 or 85.28.
heading 18 - Microphones and stands therefor; loudspeakers, whether or not
mounted in their enclosures; headphones and earphones,
whether or not combined with a microphone, and sets consisting
of a microphone and one or more loudspeakers; audio-
frequency electric amplifiers; electric sound amplifier sets.
heading 19 - Sound recording or reproducing apparatus.
heading 21 - Video recording or reproducing apparatus, whether or not
incorporating a video tuner.
heading 22 - Parts and accessories suitable for use solely or principally with
the apparatus of heading 85.19 or 85.21.
heading 23 - Discs, tapes, solid-state non-volatile storage devices, “smart
cards” and other media for the recording of sound or of other
phenomena, whether or not recorded, including matrices and
masters for the production of discs, but excluding products of
Chapter 37.
heading 24 - Flat panel display modules, whether or not incorporating touch-
sensitive screens.
heading 25 - Transmission apparatus for radio-broadcasting or television,
whether or not incorporating reception apparatus or sound
recording or reproducing apparatus; television cameras, digital
cameras and video camera recorders.
heading 26 - Radar apparatus, radio navigational aid apparatus and radio
remote control apparatus.
heading 27 - Reception apparatus for radio-broadcasting, whether or not
combined, in the same housing, with sound recording or
reproducing apparatus or a clock.
heading 28 - Monitors and projectors, not incorporating television reception
apparatus; reception apparatus for television, whether or not
incorporating radio-broadcast receivers or sound or video
recording or reproducing apparatus.
heading 29 - Parts suitable for use solely or principally with the apparatus of
headings 85.24 to 85.28.
heading 30 - Electrical signalling, safety or traffic control equipment for
railways, tramways, roads, inland waterways, parking facilities,
port installations or airfields (other than those of
heading 86.08).
heading 31 - Electric sound or visual signalling apparatus (for example, bells,
sirens, indicator panels, burglar or fire alarms), other than
those of heading 85.12 or 85.30.
heading 32 - Electrical capacitors, fixed, variable or adjustable (pre -set).
heading 33 - Electrical resistors (including rheostats and potentiometers),
other than heating resistors.
heading 34 - Printed circuits.
heading 35 - Electrical apparatus for switching or protecting electrical
circuits, or for making connections to or in electrical circuits
(for example, switches, fuses, lightning arresters, voltage
limiters, surge suppressors, plugs and other connectors,
junction boxes), for a voltage exceeding 1,000 volts.
heading 36 - Electrical apparatus for switching or protecting electrical
circuits, or for making connections to or in electrical circuits
(for example, switches, relays, fuses, surge suppressors, plugs,
sockets, lamp-holders and other connectors, junction boxes), for
a voltage not exceeding 1,000 volts; connectors for optical
fibres, optical fibre bundles or cables.
heading 37 - Boards, panels, consoles, desks, cabinets and other bases,
equipped with two or more apparatus of heading 85.35 or 85.36,
for electric control or the distribution of electricity, including
those incorporating instruments or apparatus of Chapter 90,
and numerical control apparatus, other than switching
apparatus of heading 85.17.
heading 38 - Parts suitable for use solely or principally with the apparatus of
heading 85.35, 85.36 or 85.37.
heading 39 - Electric filament or discharge lamps, including sealed beam
lamp units and ultra-violet or infra-red lamps; arc-lamps; light-
emitting diode (LED) light sources.
heading 40 - Thermionic, cold cathode or photo-cathode valves and tubes
(for example, vacuum or vapour or gas filled valves and tubes,
mercury arc rectifying valves and tubes, cathode-ray tubes,
television camera tubes).
heading 41 - Semiconductor devices (for example, diodes, transistors,
semiconductor-based transducers); photosensitive
semiconductor devices, including photovoltaic cells whether or
not assembled in modules or made up into panels; light-
emitting diodes (LED), whether or not assembled with other
light-emitting diodes (LED); mounted piezo-electric crystals.
heading 42 - Electronic integrated circuits.
heading 43 - Electrical machines and apparatus, having individual functions,
not specified or included elsewhere in this Chapter.
heading 44 - Insulated (including enamelled or anodised) wire, cable
(including co-axial cable) and other insulated electric
conductors, whether or not fitted with connectors; optical fibre
cables, made up of individually sheathed fibres, whether or not
assembled with electric conductors or fitted with connectors.
heading 45 - Carbon electrodes, carbon brushes, lamp carbons, battery
carbons and other articles of graphite or other carbon, with or
without metal, of a kind used for electrical purposes.
heading 46 - Electrical insulators of any material.
heading 47 - Insulating fittings for electrical machines, appliances or
equipment, being fittings wholly of insulating material apart
from any minor components of metal (for example, threaded
sockets) incorporated during moulding solely for purposes of
assembly, other than insulators of heading 85.46; electrical
conduit tubing and joints therefor, of base metal lined with
insulating material.
heading 48 - Electrical parts of machinery or apparatus, not specified or
included elsewhere in this Chapter.
heading 49 - Electrical and electronic waste and scrap . | {"heading_id": "10"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: old textile items
These are the possible headings: heading 01 - Blankets and travelling rugs.
heading 02 - Bed linen, table linen, toilet linen and kitchen linen.
heading 03 - Curtains (including drapes) and interior blinds; curtain or bed
valances.
heading 04 - Other furnishing articles , excluding those o f heading 94.04.
heading 05 - Sacks and bags, of a kind used for the packing of goods.
heading 06 - Tarpaulins, awnings and sunblinds; tents (including temporary
canopies and similar articles); sails for boats, sailboards or
landcraft; camping goods.
heading 07 - Other ma de up articles, includin g dress patterns.
heading 08 - Sets consisting of woven fabric and yarn, whether or not with
accessories, for making up into rugs, tapestries, embroidered
table cloths or serviettes, or similar textile articles, put up in
packings for retail sale.
heading 09 - Worn clothing and other worn articles.
heading 10 - Used or new rags, scrap twine, cordage, rope and cables and
worn out articles of twine, cordage, rope or cables, of textile
materials. | {"heading_id": "07"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: chilled sparidae fish
These are the possible headings: heading 01 - Live fish .
heading 02 - Fish, fresh or chilled, excluding fish fillets and other fish meat of
heading 03.04.
heading 03 - Fish, frozen, excluding fish fillets and other fish meat of heading
03.04.
heading 04 - Fish fillets and other fish meat (whether or not minced), fresh,
chilled or frozen.
heading 05 - Fish, dried, salted or in brine; smoked fish, whether or not
cooked before or during the smoking process.
heading 06 - Crustaceans, whether in shell or not, live, fresh, chilled, frozen,
dried, salted or in brine; smoked crustaceans, whether in shell
or not, whether or not cooked before or during the smoking
process; crustaceans, in shell, cooked by steaming or by boiling
in water, whether or not chilled, frozen, dried, salted or in
brine.
heading 07 - Molluscs, whether in shell or not, live, fresh, chilled, frozen,
dried, salted or in brine; smoked molluscs, whether in shell or
not, whether or not cooked before or during the smoking
process.
heading 08 - Aquatic invertebrates other than crustaceans and molluscs, live,
fresh, chilled, frozen, dried, salted or in brine; smoked aquatic
invertebrates other than crustaceans and molluscs, whether or
not cooked before or during the smoking process.
heading 09 - Flours, meals and pellets of fish, crustaceans, molluscs and
other aquatic invertebrates, fit for human consumption. | {"heading_id": "02"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: plstic-coated cable
These are the possible headings: heading 01 - Wadding of textile materials and articles thereof; textile fibres,
not exceeding 5 mm in length (flock), textile dust and mill neps.
heading 02 - Felt, whether or not impregnated, coated, covered or laminated.
heading 03 - Nonwovens, whether or not impregnated, coated, covered or
laminated.
heading 04 - Rubber thread and cord, textile covered; textile yarn, and strip
and the like of heading 54.04 or 54.05, impregnated, coated,
covered or sheathed with rubber or plastics.
heading 05 - Metallised yarn, whether or not gimped, being textile yarn, or
strip or the like of heading 54.04 or 54.05, combined with metal
in the form of thread, strip or powder or covered with metal.
heading 06 - Gimped yarn, and strip and the like of heading 54.04 or 54.05,
gimped (other than those of heading 56.05 and gimped horsehair
yarn); chenille yarn (including flock chenille yarn); loop wale-
yarn.
heading 07 - Twine, cordage, ropes and cables, whether or not plaited or
braided and whether or not impregnated, coated, covered or
sheathed with rubber or plastics.
heading 08 - Knotted netting of twine, cordage or rope; made up fishing nets
and other made up nets, of textile materials.
heading 09 - Articles of yarn, strip or the like of heading 54.04 or 54.05, twine,
cordage, rope or cables, not elsewhere specified or included. | {"heading_id": "07"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: high metric cotton
These are the possible headings: heading 01 - Cotton, not carded or combed.
heading 02 - Cotton w aste (including yarn waste and garnetted stock).
heading 03 - Cotton, carded or combed.
heading 04 - Cotton sewing thread, whether or not put up for retail sale.
heading 05 - Cotton yarn (other than sewing thread), containing 85 % or
more by weight of cotton, not put up for retail sale.
heading 06 - Cotton yarn (other than sewing thread), containing less than
85 % by weight of cotton, not put up for retail sale.
heading 07 - Cotton yarn (other than sewing thread) put up for retail sale.
heading 08 - Woven fabrics of cotton, containing 85 % or more by weight of
cotton, weighing not more than 200 g/m2
.
heading 09 - Woven fabrics of cotton, containing 85 % or more by weight of
cotton, weighing more than 200 g/m2
.
heading 10 - Woven fabrics of cotton, containing less than 85 % by weight of
cotton, mixed mainly or solely with man-made fibres, weighing
not more than 200 g/m2
.
heading 11 - Woven fabrics of cotton, containing less than 85 % by weight of
cotton, mixed mainly or solely with man-made fibres, weighing
more than 200 g/m2
.
heading 12 - Other woven fabrics of cotton. | {"heading_id": "05"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: dense wood
These are the possible headings: heading 01 - Fuel wood, in logs, in billets, in twigs, in faggots or in similar
forms; wood in chips or particles; sawdust and wood waste and
scrap, whether or not agglomerated in logs, briquettes, pellets or
similar forms.
heading 02 - Wood charcoal (including shell or nut charcoal), whether or not
agglomerated.
heading 03 - Wood in the rough, whether or not stripped of bark or sapwood,
or roughly squared.
heading 04 - Hoopwood; split poles; piles, pickets and stakes of wood, pointed
but not sawn lengthwise; wooden sticks, roughly trimmed but not
turned, bent or otherwise worked, suitable for the manufacture
of walking-sticks, umbrellas, tool handles or the like; chipwood
and the like.
heading 05 - Wood wool; wood flour.
heading 06 - Railway or tramway sleepers (c ross-ties) of wood.
heading 07 - Wood sawn or chipped lengthwise, sliced or peeled, whether or
not planed, sanded or end-jointed, of a thickness exceeding 6 mm.
heading 08 - Sheets for veneering (including those obtained by slicing
laminated wood), for plywood or for similar laminated wood
and other wood, sawn lengthwise, sliced or peeled, whether or
not planed, sanded, spliced or end-jointed, of a thickness not
exceeding 6 mm.
heading 09 - Wood (including strips and friezes for parquet flooring, not
assembled) continuously shaped (tongued, grooved, rebated,
chamfered, V-jointed, beaded, moulded, rounded or the like)
along any of its edges, ends or faces, whether or not planed,
sanded or end-jointed.
heading 10 - Particle board, oriented strand board (OSB) and similar board
(for example, waferboard) of wood or other ligneous materials,
whether or not agglomerated with resins or other organic
binding substances.
heading 11 - Fibreboard of wood or other ligneous materials, whether or not
bonded with resins or other organic substances.
heading 12 - Plywood, veneered panels and similar laminated wood.
heading 13 - Densified wood, in blocks, plates, strips or profile shapes.
heading 14 - Wooden frames for paintings, photographs, mirrors or similar
objects.
heading 15 - Packing cases, boxes, crates, drums and similar packings, of
wood; cable-drums of wood; pallets, box pallets and other load
boards, of wood; pallet collars of wood.
heading 16 - Casks, barrels, vats, tubs and other coopers' products and parts
thereof, of wood, including staves.
heading 17 - Tools, tool bodies, tool handles, broom or brush bodies and
handles, of wood; boot or shoe lasts and trees, of wood.
heading 18 - Builders' joinery and carpentry of wood, including cellular wood
panels, assembled flooring panels, shingles and shakes.
heading 19 - Tableware and kitchenware, of wood.
heading 20 - Wood marquetry and inlaid wood; caskets and cases for
jewellery or cutlery, and similar articles, of wood; statuettes and
other ornaments, of wood; wooden articles of furniture not
falling in Chapter 94.
heading 21 - Other articles of wood. | {"heading_id": "13"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: industrial gen set
These are the possible headings: heading 01 - Electric motors and gene rators (excluding generating sets).
heading 02 - Electric generating sets and rotary converters.
heading 03 - Parts suitable for use solely or principally with the machines of
heading 85.01 or 85.02.
heading 04 - Electrical transformers, static converters (for example,
rectifiers) and inductors.
heading 05 - Electro-magnets; permanent magnets and articles intended to
become permanent magnets after magnetisation; electro-
magnetic or permanent magnet chucks, clamps and similar
holding devices; electro-magnetic couplings, clutches and
brakes; electro-magnetic lifting heads.
heading 06 - Primary cells and primary batteries.
heading 07 - Electric accumulators, including separators therefor, whether
or not rectangular (including square).
heading 08 - Vacuum cleaners.
heading 09 - Electro-mechanical domestic appliances, with self-contained
electric motor, other than vacuum cleaners of heading 85.08.
heading 10 - Shavers, hair clippers and hair-removing appliances, with self-
contained electric motor.
heading 11 - Electrical ignition or starting equipment of a kind used for
spark-ignition or compression-ignition internal combustion
engines (for example, ignition magnetos, magneto-dynamos,
ignition coils, sparking plugs and glow plugs, starter motors);
generators (for example, dynamos, alternators) and cut-outs of
a kind used in conjunction with such engines.
heading 12 - Electrical lighting or signalling equipment (excluding articles of
heading 85.39), windscreen wipers, defrosters and demisters, of
a kind used for cycles or motor vehicles.
heading 13 - Portable electric lamps designed to function by their own source
of energy (for example, dry batteries, accumulators, magnetos),
other than lighting equipment of heading 85.12.
heading 14 - Industrial or laboratory electric furnaces and ovens (including
those functioning by induction or dielectric loss); other
industrial or laboratory equipment for the heat treatment of
materials by induction or dielectric loss.
heading 15 - Electric (including electrically heated gas), laser or other light
or photon beam, ultrasonic, electron beam, magnetic pulse or
plasma arc soldering, brazing or welding machines and
apparatus, whether or not capable of cutting; electric machines
and apparatus for hot spraying of metals or cermets.
heading 16 - Electric instantaneous or storage water heaters and immersion
heaters; electric space heating apparatus and soil heating
apparatus; electro-thermic hair-dressing apparatus (for
example, hair dryers, hair curlers, curling tong heaters) and
hand dryers; electric smoothing irons; other electro-thermic
appliances of a kind used for domestic purposes; electric
heating resistors, other than those of heading 85.45.
heading 17 - Telephone sets, including smartphones and other telephones for
cellular networks or for other wireless networks; other
apparatus for the transmission or reception of voice, images or
other data, including apparatus for communication in a wired
or wireless network (such as a local or wide area network),
other than transmission or reception apparatus of
heading 84.43, 85.25, 85.27 or 85.28.
heading 18 - Microphones and stands therefor; loudspeakers, whether or not
mounted in their enclosures; headphones and earphones,
whether or not combined with a microphone, and sets consisting
of a microphone and one or more loudspeakers; audio-
frequency electric amplifiers; electric sound amplifier sets.
heading 19 - Sound recording or reproducing apparatus.
heading 21 - Video recording or reproducing apparatus, whether or not
incorporating a video tuner.
heading 22 - Parts and accessories suitable for use solely or principally with
the apparatus of heading 85.19 or 85.21.
heading 23 - Discs, tapes, solid-state non-volatile storage devices, “smart
cards” and other media for the recording of sound or of other
phenomena, whether or not recorded, including matrices and
masters for the production of discs, but excluding products of
Chapter 37.
heading 24 - Flat panel display modules, whether or not incorporating touch-
sensitive screens.
heading 25 - Transmission apparatus for radio-broadcasting or television,
whether or not incorporating reception apparatus or sound
recording or reproducing apparatus; television cameras, digital
cameras and video camera recorders.
heading 26 - Radar apparatus, radio navigational aid apparatus and radio
remote control apparatus.
heading 27 - Reception apparatus for radio-broadcasting, whether or not
combined, in the same housing, with sound recording or
reproducing apparatus or a clock.
heading 28 - Monitors and projectors, not incorporating television reception
apparatus; reception apparatus for television, whether or not
incorporating radio-broadcast receivers or sound or video
recording or reproducing apparatus.
heading 29 - Parts suitable for use solely or principally with the apparatus of
headings 85.24 to 85.28.
heading 30 - Electrical signalling, safety or traffic control equipment for
railways, tramways, roads, inland waterways, parking facilities,
port installations or airfields (other than those of
heading 86.08).
heading 31 - Electric sound or visual signalling apparatus (for example, bells,
sirens, indicator panels, burglar or fire alarms), other than
those of heading 85.12 or 85.30.
heading 32 - Electrical capacitors, fixed, variable or adjustable (pre -set).
heading 33 - Electrical resistors (including rheostats and potentiometers),
other than heating resistors.
heading 34 - Printed circuits.
heading 35 - Electrical apparatus for switching or protecting electrical
circuits, or for making connections to or in electrical circuits
(for example, switches, fuses, lightning arresters, voltage
limiters, surge suppressors, plugs and other connectors,
junction boxes), for a voltage exceeding 1,000 volts.
heading 36 - Electrical apparatus for switching or protecting electrical
circuits, or for making connections to or in electrical circuits
(for example, switches, relays, fuses, surge suppressors, plugs,
sockets, lamp-holders and other connectors, junction boxes), for
a voltage not exceeding 1,000 volts; connectors for optical
fibres, optical fibre bundles or cables.
heading 37 - Boards, panels, consoles, desks, cabinets and other bases,
equipped with two or more apparatus of heading 85.35 or 85.36,
for electric control or the distribution of electricity, including
those incorporating instruments or apparatus of Chapter 90,
and numerical control apparatus, other than switching
apparatus of heading 85.17.
heading 38 - Parts suitable for use solely or principally with the apparatus of
heading 85.35, 85.36 or 85.37.
heading 39 - Electric filament or discharge lamps, including sealed beam
lamp units and ultra-violet or infra-red lamps; arc-lamps; light-
emitting diode (LED) light sources.
heading 40 - Thermionic, cold cathode or photo-cathode valves and tubes
(for example, vacuum or vapour or gas filled valves and tubes,
mercury arc rectifying valves and tubes, cathode-ray tubes,
television camera tubes).
heading 41 - Semiconductor devices (for example, diodes, transistors,
semiconductor-based transducers); photosensitive
semiconductor devices, including photovoltaic cells whether or
not assembled in modules or made up into panels; light-
emitting diodes (LED), whether or not assembled with other
light-emitting diodes (LED); mounted piezo-electric crystals.
heading 42 - Electronic integrated circuits.
heading 43 - Electrical machines and apparatus, having individual functions,
not specified or included elsewhere in this Chapter.
heading 44 - Insulated (including enamelled or anodised) wire, cable
(including co-axial cable) and other insulated electric
conductors, whether or not fitted with connectors; optical fibre
cables, made up of individually sheathed fibres, whether or not
assembled with electric conductors or fitted with connectors.
heading 45 - Carbon electrodes, carbon brushes, lamp carbons, battery
carbons and other articles of graphite or other carbon, with or
without metal, of a kind used for electrical purposes.
heading 46 - Electrical insulators of any material.
heading 47 - Insulating fittings for electrical machines, appliances or
equipment, being fittings wholly of insulating material apart
from any minor components of metal (for example, threaded
sockets) incorporated during moulding solely for purposes of
assembly, other than insulators of heading 85.46; electrical
conduit tubing and joints therefor, of base metal lined with
insulating material.
heading 48 - Electrical parts of machinery or apparatus, not specified or
included elsewhere in this Chapter.
heading 49 - Electrical and electronic waste and scrap . | {"heading_id": "02"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: acrylic material
These are the possible headings: heading 01 - Synthetic filament tow.
heading 02 - Artificial filament tow.
heading 03 - Synthetic staple fibres, not carded, combed or otherwise
processed for spinning.
heading 04 - Artificial staple fibres, not carded, combed or otherwise
processed for spinning.
heading 05 - Waste (including noils, yarn waste and garnetted stock) of man -made fibres
heading 06 - Synthetic staple fibres, carded, combed or otherwise processed
for spinning.
heading 07 - Artificial staple fibres, carded, combed or otherwise processed
for spinning.
heading 08 - Sewing thread of man-made staple fibres, whether or not put up
for retail sale.
heading 09 - Yarn (other than sewing thread) of synthetic staple fibres, not
put up for retail sale.
heading 10 - Yarn (other than sewing thread) of artificial staple fibres, not put
up for retail sale.
heading 11 - Yarn (other than sewing thread) of man-made staple fibres, put
up for retail sale.
heading 12 - Woven fabrics of synthetic staple fibres, containing 85 % or more
by weight of synthetic staple fibres.
heading 13 - Woven fabrics of synthetic staple fibres, containing less than
85 % by weight of such fibres, mixed mainly or solely with
cotton, of a weight not exceeding 170 g/m².
heading 14 - Woven fabrics of synthetic staple fibres, containing less than
85 % by weight of such fibres, mixed mainly or solely with
cotton, of a weight exceeding 170 g/m².
heading 15 - Other woven fabrics of synthetic staple fibres.
heading 16 - Woven fabrics of artificial staple fibres. | {"heading_id": "15"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: therapy machine
These are the possible headings: heading 01 - Optical fibres and optical fibre bundles; optical fibre cables other
than those of heading 85.44; sheets and plates of polarising
material; lenses (including contact lenses), prisms, mirrors and
other optical elements, of any material, unmounted, other than
such elements of glass not optically worked.
heading 02 - Lenses, prisms, mirrors and other optical elements, of any
material, mounted, being parts of or fittings for instruments or
apparatus, other than such elements of glass not optically
worked.
heading 03 - Frames and mountings for spectacles, goggles or the like, and
parts thereof.
heading 04 - Spectacles, goggles and the like, corrective, protective or other.
heading 05 - Binoculars, monoculars, other optical telescopes, and mountings
therefor; other astronomical instruments and mountings
therefor, but not including instruments for radio-astronomy.
heading 06 - Photographic (other than cinematographic) cameras;
photographic flashlight apparatus and flashbulbs other than
discharge lamps of heading 85.39.
heading 07 - Cinematographic cameras and projectors, whether or not
incorporating sound recording or reproducing apparatus.
heading 08 - Image projectors, other than cinematographic; photographic
(other than cinematographic) enlargers and reducers.
heading 10 - Apparatus and equipment for photographic (including
cinematographic) laboratories, not specified or included
elsewhere in this Chapter; negatoscopes; projection screens.
heading 11 - Compound optical microscopes, including those for
photomicrography, cinephotomicrography or microprojection
heading 12 - Microscopes other than optical microscopes; diffraction
apparatus.
heading 13 - Lasers, other than laser diodes; other optical appliances and
instruments, not specified or included elsewhere in this Chapter.
heading 14 - Direction finding compasses; other navigational instruments and
appliances.
heading 15 - Surveying (including photogrammetrical surveying),
hydrographic, oceanographic, hydrological, meteorological or
geophysical instruments and appliances, excluding compasses;
rangefinders.
heading 16 - Balances of a sensitivity of 5 cg or better, with or without weights.
heading 17 - Drawing, marking-out or mathematical calculating instruments
(for example, drafting machines, pantographs, protractors,
drawing sets, slide rules, disc calculators); instruments for
measuring length, for use in the hand (for example, measuring
rods and tapes, micrometers, callipers), not specified or included
elsewhere in this Chapter.
heading 18 - Instruments and appliances used in medical, surgical, dental or
veterinary sciences, including scintigraphic apparatus, other
electro-medical apparatus and sight-testing instruments.
heading 19 - Mechano-therapy appliances; massage apparatus; psychological
aptitude-testing apparatus; ozone therapy, oxygen therapy,
aerosol therapy, artificial respiration or other therapeutic
respiration apparatus.
heading 20 - Other breathing appliances and gas masks, excluding protective
masks having neither mechanical parts nor replaceable filters.
heading 21 - Orthopaedic appliances, including crutches, surgical belts and
trusses; splints and other fracture appliances; artificial parts of
the body; hearing aids and other appliances which are worn or
carried, or implanted in the body, to compensate for a defect or
disability.
heading 22 - Apparatus based on the use of X-rays or of alpha, beta, gamma
or other ionising radiations, whether or not for medical, surgical,
dental or veterinary uses, including radiography or radiotherapy
apparatus, X-ray tubes and other X-ray generators, high tension
generators, control panels and desks, screens, examination or
treatment tables, chairs and the like.
heading 23 - Instruments, apparatus and models, designed for
demonstrational purposes (for example, in education or
exhibitions), unsuitable for other uses.
heading 24 - Machines and appliances for testing the hardness, strength,
compressibility, elasticity or other mechanical properties of
materials (for example, metals, wood, textiles, paper, plastics).
heading 25 - Hydrometers and similar floating instruments, thermometers,
pyrometers, barometers, hygrometers and psychrometers,
recording or not, and any combination of these instruments.
heading 26 - Instruments and apparatus for measuring or checking the flow,
level, pressure or other variables of liquids or gases (for example,
flow meters, level gauges, manometers, heat meters), excluding
instruments and apparatus of heading 90.14, 90.15, 90.28 or
90.32.
heading 27 - Instruments and apparatus for physical or chemical analysis (for
example, polarimeters, refractometers, spectrometers, gas or
smoke analysis apparatus); instruments and apparatus for
measuring or checking viscosity, porosity, expansion, surface
tension or the like; instruments and apparatus for measuring or
checking quantities of heat, sound or light (including exposure
meters); microtomes.
heading 28 - Gas, liquid or electricity supply or production meters, including
calibrating meters therefor.
heading 29 - Revolution counters, production counters, taximeters,
mileometers, pedometers and the like; speed indicators and
tachometers, other than those of heading 90.14 or 90.15;
stroboscopes.
heading 30 - Oscilloscopes, spectrum analysers and other instruments and
apparatus for measuring or checking electrical quantities,
excluding meters of heading 90.28; instruments and apparatus
for measuring or detecting alpha, beta, gamma, X-ray, cosmic or
other ionising radiations.
heading 31 - Measuring or checking instruments, appliances and machines,
not specified or included elsewhere in this Chapter; profile
projectors.
heading 32 - Automatic regulating or cont rolling instruments and apparatus.
heading 33 - Parts and accessories (not specified or included elsewhere in this
Chapter) for machines, appliances, instruments or apparatus of
Chapter 90. | {"heading_id": "19"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: poker cards
These are the possible headings: heading 03 - Tricycles, scooters, pedal cars and similar wheeled toys; dolls'
carriages; dolls; other toys; reduced-size ("scale") models and
similar recreational models, working or not; puzzles of all
kinds.
heading 04 - Video game consoles and machines, table or parlour games,
including pintables, billiards, special tables for casino games
and automatic bowling equipment, amusement machines
operated by coins, banknotes, bank cards, tokens or by any
other means of payment.
heading 05 - Festive, carnival or other entertainment articles, including
conjuring tricks and novelty jokes.
heading 06 - Articles and equipment for general physical exercise, gymnastics,
athletics, other sports (including table-tennis) or outdoor games,
not specified or included elsewhere in this Chapter; swimming
pools and paddling pools
heading 07 - Fishing rods, fish-hooks and other line fishing tackle; fish landing
nets, butterfly nets and similar nets; decoy “birds” (other than
those of heading 92.08 or 97.05) and similar hunting or shooting
requisites.
heading 08 - Travelling circuses and travelling menageries; amusement park
rides and water park amusements; fairground amusements,
including shooting galleries; travelling theatres. | {"heading_id": "04"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: cumin powder 1kg
These are the possible headings: heading 01 - Coffee, whether or not roasted or decaffeinated; coffee husks and
heading 02 - Tea, whether or not fla voured .
heading 03 - Maté.
heading 04 - Pepper of the genus Piper ; dried or crushed or ground fruits of
heading 05 - Vanilla .
heading 06 - Cinnamon and cinnamon -tree flowers .
heading 07 - Cloves (whole fruit, cl oves and stems) .
heading 08 - Nutmeg, mace and cardamoms .
heading 09 - Seeds of anise, badian, fennel, coriander, cumin or caraway;
heading 10 - Ginger, saffron, turmeric (curcuma), thyme, bay leaves, curry | {"heading_id": "09"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: plastic assembly tool
These are the possible headings: heading 01 - Nuclear reactors; fuel elements (cartridges), non-irradiated, for
nuclear reactors; machinery and apparatus for isotopic
separation.
heading 02 - Steam or other vapour generating boilers (other than central
heating hot water boilers capable also of producing low pressure
steam); super-heated water boilers.
heading 03 - Central heating boilers other than those of heading 84.02.
heading 04 - Auxiliary plant for use with boilers of heading 84.02 or 84.03 (for
example, economisers, super-heaters, soot removers, gas
recoverers); condensers for steam or other vapour power units.
heading 05 - Producer gas or water gas generators, with or without their
purifiers; acetylene gas generators and similar water process gas
generators, with or without their purifiers.
heading 06 - Steam turbines and other vapour turbines.
heading 07 - Spark-ignition reciprocating or rotary internal combustion
piston engines.
heading 08 - Compression-ignition internal combustion piston engines (diesel
or semi-diesel engines).
heading 09 - Parts suitable for use solely or principally with the engines of
heading 84.07 or 84.08.
heading 10 - Hydraulic turbines, water wheels, and regulators therefor.
heading 11 - Turbo -jets, turbo -propellers and other gas turbines.
heading 12 - Othe r engines and motors.
heading 13 - Pumps for liquids, whether or not fitted with a measuring device;
liquid elevators.
heading 14 - Air or vacuum pumps, air or other gas compressors and fans;
ventilating or recycling hoods incorporating a fan, whether or not
fitted with filters; gas-tight biological safety cabinets, whether
or not fitted with filters.
heading 15 - Air conditioning machines, comprising a motor-driven fan and
elements for changing the temperature and humidity, including
those machines in which the humidity cannot be separately
regulated.
heading 16 - Furnace burners for liquid fuel, for pulverised solid fuel or for
gas; mechanical stokers, including their mechanical grates,
mechanical ash dischargers and similar appliances.
heading 17 - Industrial or laboratory furnaces and ovens, including
incinerators, non-electric.
heading 18 - Refrigerators, freezers and other refrigerating or freezing
equipment, electric or other; heat pumps other than air
conditioning machines of heading 84.15.
heading 19 - Machinery, plant or laboratory equipment, whether or not
electrically heated (excluding furnaces, ovens and other
equipment of heading 85.14), for the treatment of materials by a
process involving a change of temperature such as heating,
cooking, roasting, distilling, rectifying, sterilising, pasteurising,
steaming, drying, evaporating, vaporising, condensing or cooling,
other than machinery or plant of a kind used for domestic
purposes; instantaneous or storage water heaters, non-electric.
heading 20 - Calendering or other rolling machines, other than for metals or
glass, and cylinders therefor.
heading 21 - Centrifuges, including centrifugal dryers; filtering or purifying
machinery and apparatus, for liquids or gases.
heading 22 - Dish washing machines; machinery for cleaning or drying bottles
or other containers; machinery for filling, closing, sealing or
labelling bottles, cans, boxes, bags or other containers; machinery
for capsuling bottles, jars, tubes and similar containers; other
packing or wrapping machinery (including heat-shrink wrapping
machinery); machinery for aerating beverages.
heading 23 - Weighing machinery (excluding balances of a sensitivity of 5 cg
or better), including weight operated counting or checking
machines; weighing machine weights of all kinds.
heading 24 - Mechanical appliances (whether or not hand-operated) for
projecting, dispersing or spraying liquids or powders; fire
extinguishers, whether or not charged; spray guns and similar
appliances; steam or sand blasting machines and similar jet
projecting machines.
heading 25 - Pulley tackle and hoists other than skip hoists; winches and
capstans; jacks.
heading 26 - Ships' derricks; cranes, including cable cranes; mobile lifting
frames, straddle carriers and works trucks fitted with a crane.
heading 27 - Fork-lift trucks; other works trucks fitted with lifting or handling
equipment.
heading 28 - Other lifting, handling, loading or unloading machinery (for
example, lifts, escalators, conveyors, teleferics).
heading 29 - Self-propelled bulldozers, angledozers, graders, levellers,
scrapers, mechanical shovels, excavators, shovel loaders, tamping
machines and road rollers.
heading 30 - Other moving, grading, levelling, scraping, excavating, tamping,
compacting, extracting or boring machinery, for earth, minerals
or ores; pile-drivers and pile-extractors; snow-ploughs and snow-
blowers.
heading 31 - Parts suitable for use solely or principally with the machinery of
headings 84.25 to 84.30.
heading 32 - Agricultural, horticultural or forestry machinery for soil
preparation or cultivation; lawn or sports-ground rollers.
heading 33 - Harvesting or threshing machinery, including straw or fodder
balers; grass or hay mowers; machines for cleaning, sorting or
grading eggs, fruit or other agricultural produce, other than
machinery of heading 84.37.
heading 34 - Milking machines and dairy ma chinery.
heading 35 - Presses, crushers and similar machinery used in the manufacture
of wine, cider, fruit juices or similar beverages.
heading 36 - Other agricultural, horticultural, forestry, poultry-keeping or
bee-keeping machinery, including germination plant fitted with
mechanical or thermal equipment; poultry incubators and
brooders.
heading 37 - Machines for cleaning, sorting or grading seed, grain or dried
leguminous vegetables; machinery used in the milling industry or
for the working of cereals or dried leguminous vegetables, other
than farm-type machinery.
heading 38 - Machinery, not specified or included elsewhere in this Chapter,
for the industrial preparation or manufacture of food or drink,
other than machinery for the extraction or preparation of
animal or fixed vegetable or microbial fats or oils.
heading 39 - Machinery for making pulp of fibrous cellulosic material or for
making or finishing paper or paperboard.
heading 40 - Book -binding machinery, including book -sewing machines.
heading 41 - Other machinery for making up paper pulp, paper or
paperboard, including cutting machines of all kinds.
heading 42 - Machinery, apparatus and equipment (other than the machines
of headings 84.56 to 84.65) for preparing or making plates,
cylinders or other printing components; plates, cylinders and
other printing components; plates, cylinders and lithographic
stones, prepared for printing purposes (for example, planed,
grained or polished).
heading 43 - Printing machinery used for printing by means of plates,
cylinders and other printing components of heading 84.42;
other printers, copying machines and facsimile machines,
whether or not combined; parts and accessories thereof.
heading 44 - Machines for extruding, drawing, texturing or cutting man-
made textile materials.
heading 45 - Machines for preparing textile fibres; spinning, doubling or
twisting machines and other machinery for producing textile
yarns; textile reeling or winding (including weft-winding)
machines and machines for preparing textile yarns for use on
the machines of heading 84.46 or 84.47.
heading 46 - Weaving machines (looms).
heading 47 - Knitting machines, stitch-bonding machines and machines for
making gimped yarn, tulle, lace, embroidery, trimmings, braid
or net and machines for tufting.
heading 48 - Auxiliary machinery for use with machines of heading 84.44,
84.45, 84.46 or 84.47 (for example, dobbies, Jacquards,
automatic stop motions, shuttle changing mechanisms); parts
and accessories suitable for use solely or principally with the
machines of this heading or of heading 84.44, 84.45, 84.46 or
84.47 (for example, spindles and spindle flyers, card clothing,
combs, extruding nipples, shuttles, healds and heald-frames,
hosiery needles).
heading 49 - Machinery for the manufacture or finishing of felt or
nonwovens in the piece or in shapes, including machinery for
making felt hats; blocks for making hats.
heading 50 - Household or laundry-type washing machines, including
machines which both wash and dry.
heading 51 - Machinery (other than machines of heading 84.50) for washing,
cleaning, wringing, drying, ironing, pressing (including fusing
presses), bleaching, dyeing, dressing, finishing, coating or
impregnating textile yarns, fabrics or made up textile articles
and machines for applying the paste to the base fabric or other
support used in the manufacture of floor coverings such as
linoleum; machines for reeling, unreeling, folding, cutting or
pinking textile fabrics.
heading 52 - Sewing machines, other than book-sewing machines of
heading 84.40; furniture, bases and covers specially designed
for sewing machines; sewing machine needles.
heading 53 - Machinery for preparing, tanning or working hides, skins or
leather or for making or repairing footwear or other articles of
hides, skins or leather, other than sewing machines.
heading 54 - Converters, ladles, ingot moulds and casting machines, of a kind
used in metallurgy or in metal foundries.
heading 55 - Metal -rolling mills and rolls therefor.
heading 56 - Machine-tools for working any material by removal of material,
by laser or other light or photon beam, ultrasonic, electro-
discharge, electro-chemical, electron beam, ionic-beam or
plasma arc processes; water-jet cutting machines.
heading 57 - Machining centres, unit construction machines (single station)
and multi-station transfer machines, for working metal.
heading 58 - Lathes (including turning centres) for removing metal.
heading 59 - Machine-tools (including way-type unit head machines) for
drilling, boring, milling, threading or tapping by removing
metal, other than lathes (including turning centres) of
heading 84.58.
heading 60 - Machine-tools for deburring, sharpening, grinding, honing,
lapping, polishing or otherwise finishing metal or cermets by
means of grinding stones, abrasives or polishing products, other
than gear cutting, gear grinding or gear finishing machines of
heading 84.61.
heading 61 - Machine-tools for planing, shaping, slotting, broaching, gear
cutting, gear grinding or gear finishing, sawing, cutting-off and
other machine-tools working by removing metal or cermets, not
elsewhere specified or included.
heading 62 - Machine-tools (including presses) for working metal by forging,
hammering or die forging (excluding rolling mills);
machine-tools (including presses, slitting lines and cut-to-length
lines) for working metal by bending, folding, straightening,
flattening, shearing, punching, notching or nibbling (excluding
draw-benches); presses for working metal or metal carbides,
not specified above.
heading 63 - Other machine-tools for working metal or cermets, without
removing material.
heading 64 - Machine-tools for working stone, ceramics, concrete, asbestos-
cement or like mineral materials or for cold working glass
heading 65 - Machine-tools (including machines for nailing, stapling, glueing
or otherwise assembling) for working wood, cork, bone, hard
rubber, hard plastics or similar hard materials.
heading 66 - Parts and accessories suitable for use solely or principally with
the machines of headings 84.56 to 84.65, including work or tool
holders, self-opening dieheads, dividing heads and other special
attachments for the machines; tool holders for any type of tool
for working in the hand.
heading 67 - Tools for working in the hand, pneumatic, hydraulic or with
self-contained electric or non-electric motor.
heading 68 - Machinery and apparatus for soldering, brazing or welding,
whether or not capable of cutting, other than those of
heading 85.15; gas-operated surface tempering machines and
appliances.
heading 70 - Calculating machines and pocket-size data recording,
reproducing and displaying machines with calculating
functions; accounting machines, postage-franking machines,
ticket-issuing machines and similar machines, incorporating a
calculating device; cash registers.
heading 71 - Automatic data processing machines and units thereof;
magnetic or optical readers, machines for transcribing data
onto data media in coded form and machines for processing
such data, not elsewhere specified or included.
heading 72 - Other office machines (for example, hectograph or stencil
duplicating machines, addressing machines, automatic
banknote dispensers, coin-sorting machines, coin-counting or
wrapping machines, pencil-sharpening machines, perforating or
stapling machines).
heading 73 - Parts and accessories (other than covers, carrying cases and the
like) suitable for use solely or principally with machines of
headings 84.70 to 84.72.
heading 74 - Machinery for sorting, screening, separating, washing,
crushing, grinding, mixing or kneading earth, stone, ores or
other mineral substances, in solid (including powder or paste)
form; machinery for agglomerating, shaping or moulding solid
mineral fuels, ceramic paste, unhardened cements, plastering
materials or other mineral products in powder or paste form;
machines for forming foundry moulds of sand.
heading 75 - Machines for assembling electric or electronic lamps, tubes or
valves or flashbulbs, in glass envelopes; machines for
manufacturing or hot working glass or glassware.
heading 76 - Automatic goods-vending machines (for example, postage
stamp, cigarette, food or beverage machines), including money-
changing machines.
heading 77 - Machinery for working rubber or plastics or for the
manufacture of products from these materials, not specified or
included elsewhere in this Chapter.
heading 78 - Machinery for preparing or making up tobacco, not specified or
included elsewhere in this Chapter.
heading 79 - Machines and mechanical appliances having individual
functions, not specified or included elsewhere in this Chapter.
heading 80 - Moulding boxes for metal foundry; mould bases; moulding
patterns; moulds for metal (other than ingot moulds), metal
carbides, glass, mineral materials, rubber or plastics.
heading 81 - Taps, cocks, valves and similar appliances for pipes, boiler
shells, tanks, vats or the like, including pressure-reducing valves
and thermostatically controlled valves.
heading 82 - Ball or roller bearings.
heading 83 - Transmission shafts (including cam shafts and crank shafts)
and cranks; bearing housings and plain shaft bearings; gears
and gearing; ball or roller screws; gear boxes and other speed
changers, including torque converters; flywheels and pulleys,
including pulley blocks; clutches and shaft couplings (including
universal joints).
heading 84 - Gaskets and similar joints of metal sheeting combined with
other material or of two or more layers of metal; sets or
assortments of gaskets and similar joints, dissimilar in
composition, put up in pouches, envelopes or similar packings;
mechanical seals.
heading 85 - Mac hines for additive manufacturing.
heading 86 - Machines and apparatus of a kind used solely or principally for
the manufacture of semiconductor boules or wafers,
semiconductor devices, electronic integrated circuits or flat
panel displays; machines and apparatus specified in Note 11 (C)
to this Chapter; parts and accessories.
heading 87 - Machinery parts, not containing electrical connectors,
insulators, coils, contacts or other electrical features, not
specified or included elsewhere in this Chapter. | {"heading_id": "65"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: car leaf spring
These are the possible headings: heading 01 - Sheet piling of iron or steel, whether or not drilled, punched or
made from assembled elements; welded angles, shapes and
sections, of iron or steel.
heading 02 - Railway or tramway track construction material of iron or steel,
the following : rails, check-rails and rack rails, switch blades,
crossing frogs, point rods and other crossing pieces, sleepers
(cross-ties), fish-plates, chairs, chair wedges, sole plates (base
plates), rail clips, bedplates, ties and other material specialized
for jointing or fixing rails.
heading 03 - Tubes, pipes and hollow profiles, of cast iron.
heading 04 - Tubes, pipes and hollow profiles, seamless, of iron (other than
cast iron) or steel.
heading 05 - Other tubes and pipes (for example, welded, riveted or similarly
closed), having circular cross-sections, the external diameter of
which exceeds 406.4 mm, of iron or steel.
heading 06 - Other tubes, pipes and hollow profiles (for example, open seam
or welded, riveted or similarly closed), of iron or steel.
heading 07 - Tube or pipe fittings (for example, couplings, elbows, sleeves), of
iron or steel.
heading 08 - Structures (excluding prefabricated buildings of heading 94.06)
and parts of structures (for example, bridges and bridge-sections,
lock-gates, towers, lattice masts, roofs, roofing frame-works,
doors and windows and their frames and thresholds for doors,
shutters, balustrades, pillars and columns), of iron or steel;
plates, rods, angles, shapes, sections, tubes and the like, prepared
for use in structures, of iron or steel.
heading 09 - Reservoirs, tanks, vats and similar containers for any material
(other than compressed or liquefied gas), of iron or steel, of a
capacity exceeding 300 l, whether or not lined or heat-insulated,
but not fitted with mechanical or thermal equipment.
heading 10 - Tanks, casks, drums, cans, boxes and similar containers, for any
material (other than compressed or liquefied gas), of iron or steel,
of a capacity not exceeding 300 l, whether or not lined or heat-
insulated, but not fitted with mechanical or thermal equipment.
heading 11 - Containers for compressed or liquefied gas, of iron or steel.
heading 12 - Stranded wire, ropes, cables, plaited bands, slings and the like, of
iron or steel, not electrically insulated.
heading 13 - Barbed wire of iron or steel; twisted hoop or single flat wire,
barbed or not, and loosely twisted double wire, of a kind used for
fencing, of iron or steel.
heading 14 - Cloth (including endless bands), grill, netting and fencing, of iron
or steel wire; expanded metal of iron or steel.
heading 15 - Chain and parts thereof, of iron or steel.
heading 16 - Anchors, grapnels and parts thereof, of iron or steel.
heading 17 - Nails, tacks, drawing pins, corrugated nails, staples (other than
those of heading 83.05) and similar articles, of iron or steel,
whether or not with heads of other material, but excluding such
articles with heads of copper.
heading 18 - Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters,
cotter-pins, washers (including spring washers) and similar
articles, of iron or steel.
heading 19 - Sewing needles, knitting needles, bodkins, crochet hooks,
embroidery stilettos and similar articles, for use in the hand, of
iron or steel; safety pins and other pins of iron or steel, not
elsewhere specified or included.
heading 20 - Springs and leaves for springs, of iron or steel.
heading 21 - Stoves, ranges, grates, cookers (including those with subsidiary
boilers for central heating), barbecues, braziers, gas-rings, plate
warmers and similar non-electric domestic appliances, and parts
thereof, of iron or steel.
heading 22 - Radiators for central heating, not electrically heated, and parts
thereof, of iron or steel; air heaters and hot air distributors
(including distributors which can also distribute fresh or
conditioned air), not electrically heated, incorporating a motor-
driven fan or blower, and parts thereof, of iron or steel.
heading 23 - Table, kitchen or other household articles and parts thereof, of
iron or steel; iron or steel wool; pot scourers and scouring or
polishing pads, gloves and the like, of iron or steel.
heading 24 - Sanitary ware and parts thereof, of iron or steel.
heading 25 - Other cast articles of iron or steel.
heading 26 - Other articles of iron or steel.
heading 01 - Copper mattes; cement copper (precipitated copper).
heading 02 - Unrefined copper; copper anodes for electrolytic refining. | {"heading_id": "20"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: buy alkaloid salts
These are the possible headings: heading 01 - Acyclic hydrocarbons .
heading 02 - Cyclic hydrocarbons .
heading 03 - Halogenated derivatives of hydrocarbons .
heading 04 - Sulphonated, nitrated or nitrosated derivatives of hydrocarbons,
heading 05 - Acyclic alcohols and their halogenated, sulphonated, nitrated or
heading 06 - Cyclic alcohols and their halogenated, sulphonated, nitrated or
heading 07 - Phenols; phenol -alcohols .
heading 08 - Halogenated, sulphonated, nitrated or nitrosated derivatives of
heading 09 - Ethers, ether -alcohols, ether -phenols, ether -alcohol -phenols,
heading 10 - Epoxides, epoxyalcohols, epoxyphenols and epoxyethers, with a
heading 12 - Aldehydes, whether or not with other oxygen function; cyclic
heading 15 - Saturated acyclic monocarboxylic acids and their anhydrides,
heading 16 - Unsaturated acyclic monocarboxylic acids, cyclic monocarboxylic
heading 17 - Polycarboxylic acids, their anhydrides, halides, peroxides and
heading 18 - Carboxylic acids with additional oxygen function and their
heading 19 - Phosphoric esters and their salts, including lactophosphates;
heading 20 - Esters of other inorganic acids of non -metals (excluding esters
heading 21 - Amine -function compounds.
heading 22 - Oxygen -function amino -compounds.
heading 23 - Quaternary ammonium salts and hydroxides; lecithins and
heading 24 - Carboxyamide -function compounds; amide -function compounds
heading 25 - Carboxyimide -function compounds (including saccharin and its
heading 26 - Nitrile -function compounds.
heading 30 - Organo -sulphur compounds.
heading 31 - Other organo -inorganic compounds .
heading 32 - Heterocyclic compounds with oxygen hetero -atom(s) only.
heading 33 - Heterocyclic compounds with nitrogen hetero -atom(s) only.
heading 34 - Nucleic acids and their salts, whether or not chemically defined;
heading 35 - Sulphonamides.
heading 36 - Provitamins and vitamins, natural or reproduced by synthesis
heading 37 - Hormones, prostaglandins, thromboxanes and leukotrienes,
heading 38 - Glycosides, natural or reproduced by synthesis, and their salts,
heading 39 - Alkaloids, natural or reproduced by synthesis, and their salts, | {"heading_id": "39"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: live lobsters
These are the possible headings: heading 01 - Live fish .
heading 02 - Fish, fresh or chilled, excluding fish fillets and other fish meat of
heading 03.04.
heading 03 - Fish, frozen, excluding fish fillets and other fish meat of heading
03.04.
heading 04 - Fish fillets and other fish meat (whether or not minced), fresh,
chilled or frozen.
heading 05 - Fish, dried, salted or in brine; smoked fish, whether or not
cooked before or during the smoking process.
heading 06 - Crustaceans, whether in shell or not, live, fresh, chilled, frozen,
dried, salted or in brine; smoked crustaceans, whether in shell
or not, whether or not cooked before or during the smoking
process; crustaceans, in shell, cooked by steaming or by boiling
in water, whether or not chilled, frozen, dried, salted or in
brine.
heading 07 - Molluscs, whether in shell or not, live, fresh, chilled, frozen,
dried, salted or in brine; smoked molluscs, whether in shell or
not, whether or not cooked before or during the smoking
process.
heading 08 - Aquatic invertebrates other than crustaceans and molluscs, live,
fresh, chilled, frozen, dried, salted or in brine; smoked aquatic
invertebrates other than crustaceans and molluscs, whether or
not cooked before or during the smoking process.
heading 09 - Flours, meals and pellets of fish, crustaceans, molluscs and
other aquatic invertebrates, fit for human consumption. | {"heading_id": "06"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: grill machine
These are the possible headings: heading 01 - Electric motors and gene rators (excluding generating sets).
heading 02 - Electric generating sets and rotary converters.
heading 03 - Parts suitable for use solely or principally with the machines of
heading 85.01 or 85.02.
heading 04 - Electrical transformers, static converters (for example,
rectifiers) and inductors.
heading 05 - Electro-magnets; permanent magnets and articles intended to
become permanent magnets after magnetisation; electro-
magnetic or permanent magnet chucks, clamps and similar
holding devices; electro-magnetic couplings, clutches and
brakes; electro-magnetic lifting heads.
heading 06 - Primary cells and primary batteries.
heading 07 - Electric accumulators, including separators therefor, whether
or not rectangular (including square).
heading 08 - Vacuum cleaners.
heading 09 - Electro-mechanical domestic appliances, with self-contained
electric motor, other than vacuum cleaners of heading 85.08.
heading 10 - Shavers, hair clippers and hair-removing appliances, with self-
contained electric motor.
heading 11 - Electrical ignition or starting equipment of a kind used for
spark-ignition or compression-ignition internal combustion
engines (for example, ignition magnetos, magneto-dynamos,
ignition coils, sparking plugs and glow plugs, starter motors);
generators (for example, dynamos, alternators) and cut-outs of
a kind used in conjunction with such engines.
heading 12 - Electrical lighting or signalling equipment (excluding articles of
heading 85.39), windscreen wipers, defrosters and demisters, of
a kind used for cycles or motor vehicles.
heading 13 - Portable electric lamps designed to function by their own source
of energy (for example, dry batteries, accumulators, magnetos),
other than lighting equipment of heading 85.12.
heading 14 - Industrial or laboratory electric furnaces and ovens (including
those functioning by induction or dielectric loss); other
industrial or laboratory equipment for the heat treatment of
materials by induction or dielectric loss.
heading 15 - Electric (including electrically heated gas), laser or other light
or photon beam, ultrasonic, electron beam, magnetic pulse or
plasma arc soldering, brazing or welding machines and
apparatus, whether or not capable of cutting; electric machines
and apparatus for hot spraying of metals or cermets.
heading 16 - Electric instantaneous or storage water heaters and immersion
heaters; electric space heating apparatus and soil heating
apparatus; electro-thermic hair-dressing apparatus (for
example, hair dryers, hair curlers, curling tong heaters) and
hand dryers; electric smoothing irons; other electro-thermic
appliances of a kind used for domestic purposes; electric
heating resistors, other than those of heading 85.45.
heading 17 - Telephone sets, including smartphones and other telephones for
cellular networks or for other wireless networks; other
apparatus for the transmission or reception of voice, images or
other data, including apparatus for communication in a wired
or wireless network (such as a local or wide area network),
other than transmission or reception apparatus of
heading 84.43, 85.25, 85.27 or 85.28.
heading 18 - Microphones and stands therefor; loudspeakers, whether or not
mounted in their enclosures; headphones and earphones,
whether or not combined with a microphone, and sets consisting
of a microphone and one or more loudspeakers; audio-
frequency electric amplifiers; electric sound amplifier sets.
heading 19 - Sound recording or reproducing apparatus.
heading 21 - Video recording or reproducing apparatus, whether or not
incorporating a video tuner.
heading 22 - Parts and accessories suitable for use solely or principally with
the apparatus of heading 85.19 or 85.21.
heading 23 - Discs, tapes, solid-state non-volatile storage devices, “smart
cards” and other media for the recording of sound or of other
phenomena, whether or not recorded, including matrices and
masters for the production of discs, but excluding products of
Chapter 37.
heading 24 - Flat panel display modules, whether or not incorporating touch-
sensitive screens.
heading 25 - Transmission apparatus for radio-broadcasting or television,
whether or not incorporating reception apparatus or sound
recording or reproducing apparatus; television cameras, digital
cameras and video camera recorders.
heading 26 - Radar apparatus, radio navigational aid apparatus and radio
remote control apparatus.
heading 27 - Reception apparatus for radio-broadcasting, whether or not
combined, in the same housing, with sound recording or
reproducing apparatus or a clock.
heading 28 - Monitors and projectors, not incorporating television reception
apparatus; reception apparatus for television, whether or not
incorporating radio-broadcast receivers or sound or video
recording or reproducing apparatus.
heading 29 - Parts suitable for use solely or principally with the apparatus of
headings 85.24 to 85.28.
heading 30 - Electrical signalling, safety or traffic control equipment for
railways, tramways, roads, inland waterways, parking facilities,
port installations or airfields (other than those of
heading 86.08).
heading 31 - Electric sound or visual signalling apparatus (for example, bells,
sirens, indicator panels, burglar or fire alarms), other than
those of heading 85.12 or 85.30.
heading 32 - Electrical capacitors, fixed, variable or adjustable (pre -set).
heading 33 - Electrical resistors (including rheostats and potentiometers),
other than heating resistors.
heading 34 - Printed circuits.
heading 35 - Electrical apparatus for switching or protecting electrical
circuits, or for making connections to or in electrical circuits
(for example, switches, fuses, lightning arresters, voltage
limiters, surge suppressors, plugs and other connectors,
junction boxes), for a voltage exceeding 1,000 volts.
heading 36 - Electrical apparatus for switching or protecting electrical
circuits, or for making connections to or in electrical circuits
(for example, switches, relays, fuses, surge suppressors, plugs,
sockets, lamp-holders and other connectors, junction boxes), for
a voltage not exceeding 1,000 volts; connectors for optical
fibres, optical fibre bundles or cables.
heading 37 - Boards, panels, consoles, desks, cabinets and other bases,
equipped with two or more apparatus of heading 85.35 or 85.36,
for electric control or the distribution of electricity, including
those incorporating instruments or apparatus of Chapter 90,
and numerical control apparatus, other than switching
apparatus of heading 85.17.
heading 38 - Parts suitable for use solely or principally with the apparatus of
heading 85.35, 85.36 or 85.37.
heading 39 - Electric filament or discharge lamps, including sealed beam
lamp units and ultra-violet or infra-red lamps; arc-lamps; light-
emitting diode (LED) light sources.
heading 40 - Thermionic, cold cathode or photo-cathode valves and tubes
(for example, vacuum or vapour or gas filled valves and tubes,
mercury arc rectifying valves and tubes, cathode-ray tubes,
television camera tubes).
heading 41 - Semiconductor devices (for example, diodes, transistors,
semiconductor-based transducers); photosensitive
semiconductor devices, including photovoltaic cells whether or
not assembled in modules or made up into panels; light-
emitting diodes (LED), whether or not assembled with other
light-emitting diodes (LED); mounted piezo-electric crystals.
heading 42 - Electronic integrated circuits.
heading 43 - Electrical machines and apparatus, having individual functions,
not specified or included elsewhere in this Chapter.
heading 44 - Insulated (including enamelled or anodised) wire, cable
(including co-axial cable) and other insulated electric
conductors, whether or not fitted with connectors; optical fibre
cables, made up of individually sheathed fibres, whether or not
assembled with electric conductors or fitted with connectors.
heading 45 - Carbon electrodes, carbon brushes, lamp carbons, battery
carbons and other articles of graphite or other carbon, with or
without metal, of a kind used for electrical purposes.
heading 46 - Electrical insulators of any material.
heading 47 - Insulating fittings for electrical machines, appliances or
equipment, being fittings wholly of insulating material apart
from any minor components of metal (for example, threaded
sockets) incorporated during moulding solely for purposes of
assembly, other than insulators of heading 85.46; electrical
conduit tubing and joints therefor, of base metal lined with
insulating material.
heading 48 - Electrical parts of machinery or apparatus, not specified or
included elsewhere in this Chapter.
heading 49 - Electrical and electronic waste and scrap . | {"heading_id": "16"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: digital radio clock
These are the possible headings: heading 01 - Electric motors and gene rators (excluding generating sets).
heading 02 - Electric generating sets and rotary converters.
heading 03 - Parts suitable for use solely or principally with the machines of
heading 85.01 or 85.02.
heading 04 - Electrical transformers, static converters (for example,
rectifiers) and inductors.
heading 05 - Electro-magnets; permanent magnets and articles intended to
become permanent magnets after magnetisation; electro-
magnetic or permanent magnet chucks, clamps and similar
holding devices; electro-magnetic couplings, clutches and
brakes; electro-magnetic lifting heads.
heading 06 - Primary cells and primary batteries.
heading 07 - Electric accumulators, including separators therefor, whether
or not rectangular (including square).
heading 08 - Vacuum cleaners.
heading 09 - Electro-mechanical domestic appliances, with self-contained
electric motor, other than vacuum cleaners of heading 85.08.
heading 10 - Shavers, hair clippers and hair-removing appliances, with self-
contained electric motor.
heading 11 - Electrical ignition or starting equipment of a kind used for
spark-ignition or compression-ignition internal combustion
engines (for example, ignition magnetos, magneto-dynamos,
ignition coils, sparking plugs and glow plugs, starter motors);
generators (for example, dynamos, alternators) and cut-outs of
a kind used in conjunction with such engines.
heading 12 - Electrical lighting or signalling equipment (excluding articles of
heading 85.39), windscreen wipers, defrosters and demisters, of
a kind used for cycles or motor vehicles.
heading 13 - Portable electric lamps designed to function by their own source
of energy (for example, dry batteries, accumulators, magnetos),
other than lighting equipment of heading 85.12.
heading 14 - Industrial or laboratory electric furnaces and ovens (including
those functioning by induction or dielectric loss); other
industrial or laboratory equipment for the heat treatment of
materials by induction or dielectric loss.
heading 15 - Electric (including electrically heated gas), laser or other light
or photon beam, ultrasonic, electron beam, magnetic pulse or
plasma arc soldering, brazing or welding machines and
apparatus, whether or not capable of cutting; electric machines
and apparatus for hot spraying of metals or cermets.
heading 16 - Electric instantaneous or storage water heaters and immersion
heaters; electric space heating apparatus and soil heating
apparatus; electro-thermic hair-dressing apparatus (for
example, hair dryers, hair curlers, curling tong heaters) and
hand dryers; electric smoothing irons; other electro-thermic
appliances of a kind used for domestic purposes; electric
heating resistors, other than those of heading 85.45.
heading 17 - Telephone sets, including smartphones and other telephones for
cellular networks or for other wireless networks; other
apparatus for the transmission or reception of voice, images or
other data, including apparatus for communication in a wired
or wireless network (such as a local or wide area network),
other than transmission or reception apparatus of
heading 84.43, 85.25, 85.27 or 85.28.
heading 18 - Microphones and stands therefor; loudspeakers, whether or not
mounted in their enclosures; headphones and earphones,
whether or not combined with a microphone, and sets consisting
of a microphone and one or more loudspeakers; audio-
frequency electric amplifiers; electric sound amplifier sets.
heading 19 - Sound recording or reproducing apparatus.
heading 21 - Video recording or reproducing apparatus, whether or not
incorporating a video tuner.
heading 22 - Parts and accessories suitable for use solely or principally with
the apparatus of heading 85.19 or 85.21.
heading 23 - Discs, tapes, solid-state non-volatile storage devices, “smart
cards” and other media for the recording of sound or of other
phenomena, whether or not recorded, including matrices and
masters for the production of discs, but excluding products of
Chapter 37.
heading 24 - Flat panel display modules, whether or not incorporating touch-
sensitive screens.
heading 25 - Transmission apparatus for radio-broadcasting or television,
whether or not incorporating reception apparatus or sound
recording or reproducing apparatus; television cameras, digital
cameras and video camera recorders.
heading 26 - Radar apparatus, radio navigational aid apparatus and radio
remote control apparatus.
heading 27 - Reception apparatus for radio-broadcasting, whether or not
combined, in the same housing, with sound recording or
reproducing apparatus or a clock.
heading 28 - Monitors and projectors, not incorporating television reception
apparatus; reception apparatus for television, whether or not
incorporating radio-broadcast receivers or sound or video
recording or reproducing apparatus.
heading 29 - Parts suitable for use solely or principally with the apparatus of
headings 85.24 to 85.28.
heading 30 - Electrical signalling, safety or traffic control equipment for
railways, tramways, roads, inland waterways, parking facilities,
port installations or airfields (other than those of
heading 86.08).
heading 31 - Electric sound or visual signalling apparatus (for example, bells,
sirens, indicator panels, burglar or fire alarms), other than
those of heading 85.12 or 85.30.
heading 32 - Electrical capacitors, fixed, variable or adjustable (pre -set).
heading 33 - Electrical resistors (including rheostats and potentiometers),
other than heating resistors.
heading 34 - Printed circuits.
heading 35 - Electrical apparatus for switching or protecting electrical
circuits, or for making connections to or in electrical circuits
(for example, switches, fuses, lightning arresters, voltage
limiters, surge suppressors, plugs and other connectors,
junction boxes), for a voltage exceeding 1,000 volts.
heading 36 - Electrical apparatus for switching or protecting electrical
circuits, or for making connections to or in electrical circuits
(for example, switches, relays, fuses, surge suppressors, plugs,
sockets, lamp-holders and other connectors, junction boxes), for
a voltage not exceeding 1,000 volts; connectors for optical
fibres, optical fibre bundles or cables.
heading 37 - Boards, panels, consoles, desks, cabinets and other bases,
equipped with two or more apparatus of heading 85.35 or 85.36,
for electric control or the distribution of electricity, including
those incorporating instruments or apparatus of Chapter 90,
and numerical control apparatus, other than switching
apparatus of heading 85.17.
heading 38 - Parts suitable for use solely or principally with the apparatus of
heading 85.35, 85.36 or 85.37.
heading 39 - Electric filament or discharge lamps, including sealed beam
lamp units and ultra-violet or infra-red lamps; arc-lamps; light-
emitting diode (LED) light sources.
heading 40 - Thermionic, cold cathode or photo-cathode valves and tubes
(for example, vacuum or vapour or gas filled valves and tubes,
mercury arc rectifying valves and tubes, cathode-ray tubes,
television camera tubes).
heading 41 - Semiconductor devices (for example, diodes, transistors,
semiconductor-based transducers); photosensitive
semiconductor devices, including photovoltaic cells whether or
not assembled in modules or made up into panels; light-
emitting diodes (LED), whether or not assembled with other
light-emitting diodes (LED); mounted piezo-electric crystals.
heading 42 - Electronic integrated circuits.
heading 43 - Electrical machines and apparatus, having individual functions,
not specified or included elsewhere in this Chapter.
heading 44 - Insulated (including enamelled or anodised) wire, cable
(including co-axial cable) and other insulated electric
conductors, whether or not fitted with connectors; optical fibre
cables, made up of individually sheathed fibres, whether or not
assembled with electric conductors or fitted with connectors.
heading 45 - Carbon electrodes, carbon brushes, lamp carbons, battery
carbons and other articles of graphite or other carbon, with or
without metal, of a kind used for electrical purposes.
heading 46 - Electrical insulators of any material.
heading 47 - Insulating fittings for electrical machines, appliances or
equipment, being fittings wholly of insulating material apart
from any minor components of metal (for example, threaded
sockets) incorporated during moulding solely for purposes of
assembly, other than insulators of heading 85.46; electrical
conduit tubing and joints therefor, of base metal lined with
insulating material.
heading 48 - Electrical parts of machinery or apparatus, not specified or
included elsewhere in this Chapter.
heading 49 - Electrical and electronic waste and scrap . | {"heading_id": "27"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: cement grinder
These are the possible headings: heading 01 - Nuclear reactors; fuel elements (cartridges), non-irradiated, for
nuclear reactors; machinery and apparatus for isotopic
separation.
heading 02 - Steam or other vapour generating boilers (other than central
heating hot water boilers capable also of producing low pressure
steam); super-heated water boilers.
heading 03 - Central heating boilers other than those of heading 84.02.
heading 04 - Auxiliary plant for use with boilers of heading 84.02 or 84.03 (for
example, economisers, super-heaters, soot removers, gas
recoverers); condensers for steam or other vapour power units.
heading 05 - Producer gas or water gas generators, with or without their
purifiers; acetylene gas generators and similar water process gas
generators, with or without their purifiers.
heading 06 - Steam turbines and other vapour turbines.
heading 07 - Spark-ignition reciprocating or rotary internal combustion
piston engines.
heading 08 - Compression-ignition internal combustion piston engines (diesel
or semi-diesel engines).
heading 09 - Parts suitable for use solely or principally with the engines of
heading 84.07 or 84.08.
heading 10 - Hydraulic turbines, water wheels, and regulators therefor.
heading 11 - Turbo -jets, turbo -propellers and other gas turbines.
heading 12 - Othe r engines and motors.
heading 13 - Pumps for liquids, whether or not fitted with a measuring device;
liquid elevators.
heading 14 - Air or vacuum pumps, air or other gas compressors and fans;
ventilating or recycling hoods incorporating a fan, whether or not
fitted with filters; gas-tight biological safety cabinets, whether
or not fitted with filters.
heading 15 - Air conditioning machines, comprising a motor-driven fan and
elements for changing the temperature and humidity, including
those machines in which the humidity cannot be separately
regulated.
heading 16 - Furnace burners for liquid fuel, for pulverised solid fuel or for
gas; mechanical stokers, including their mechanical grates,
mechanical ash dischargers and similar appliances.
heading 17 - Industrial or laboratory furnaces and ovens, including
incinerators, non-electric.
heading 18 - Refrigerators, freezers and other refrigerating or freezing
equipment, electric or other; heat pumps other than air
conditioning machines of heading 84.15.
heading 19 - Machinery, plant or laboratory equipment, whether or not
electrically heated (excluding furnaces, ovens and other
equipment of heading 85.14), for the treatment of materials by a
process involving a change of temperature such as heating,
cooking, roasting, distilling, rectifying, sterilising, pasteurising,
steaming, drying, evaporating, vaporising, condensing or cooling,
other than machinery or plant of a kind used for domestic
purposes; instantaneous or storage water heaters, non-electric.
heading 20 - Calendering or other rolling machines, other than for metals or
glass, and cylinders therefor.
heading 21 - Centrifuges, including centrifugal dryers; filtering or purifying
machinery and apparatus, for liquids or gases.
heading 22 - Dish washing machines; machinery for cleaning or drying bottles
or other containers; machinery for filling, closing, sealing or
labelling bottles, cans, boxes, bags or other containers; machinery
for capsuling bottles, jars, tubes and similar containers; other
packing or wrapping machinery (including heat-shrink wrapping
machinery); machinery for aerating beverages.
heading 23 - Weighing machinery (excluding balances of a sensitivity of 5 cg
or better), including weight operated counting or checking
machines; weighing machine weights of all kinds.
heading 24 - Mechanical appliances (whether or not hand-operated) for
projecting, dispersing or spraying liquids or powders; fire
extinguishers, whether or not charged; spray guns and similar
appliances; steam or sand blasting machines and similar jet
projecting machines.
heading 25 - Pulley tackle and hoists other than skip hoists; winches and
capstans; jacks.
heading 26 - Ships' derricks; cranes, including cable cranes; mobile lifting
frames, straddle carriers and works trucks fitted with a crane.
heading 27 - Fork-lift trucks; other works trucks fitted with lifting or handling
equipment.
heading 28 - Other lifting, handling, loading or unloading machinery (for
example, lifts, escalators, conveyors, teleferics).
heading 29 - Self-propelled bulldozers, angledozers, graders, levellers,
scrapers, mechanical shovels, excavators, shovel loaders, tamping
machines and road rollers.
heading 30 - Other moving, grading, levelling, scraping, excavating, tamping,
compacting, extracting or boring machinery, for earth, minerals
or ores; pile-drivers and pile-extractors; snow-ploughs and snow-
blowers.
heading 31 - Parts suitable for use solely or principally with the machinery of
headings 84.25 to 84.30.
heading 32 - Agricultural, horticultural or forestry machinery for soil
preparation or cultivation; lawn or sports-ground rollers.
heading 33 - Harvesting or threshing machinery, including straw or fodder
balers; grass or hay mowers; machines for cleaning, sorting or
grading eggs, fruit or other agricultural produce, other than
machinery of heading 84.37.
heading 34 - Milking machines and dairy ma chinery.
heading 35 - Presses, crushers and similar machinery used in the manufacture
of wine, cider, fruit juices or similar beverages.
heading 36 - Other agricultural, horticultural, forestry, poultry-keeping or
bee-keeping machinery, including germination plant fitted with
mechanical or thermal equipment; poultry incubators and
brooders.
heading 37 - Machines for cleaning, sorting or grading seed, grain or dried
leguminous vegetables; machinery used in the milling industry or
for the working of cereals or dried leguminous vegetables, other
than farm-type machinery.
heading 38 - Machinery, not specified or included elsewhere in this Chapter,
for the industrial preparation or manufacture of food or drink,
other than machinery for the extraction or preparation of
animal or fixed vegetable or microbial fats or oils.
heading 39 - Machinery for making pulp of fibrous cellulosic material or for
making or finishing paper or paperboard.
heading 40 - Book -binding machinery, including book -sewing machines.
heading 41 - Other machinery for making up paper pulp, paper or
paperboard, including cutting machines of all kinds.
heading 42 - Machinery, apparatus and equipment (other than the machines
of headings 84.56 to 84.65) for preparing or making plates,
cylinders or other printing components; plates, cylinders and
other printing components; plates, cylinders and lithographic
stones, prepared for printing purposes (for example, planed,
grained or polished).
heading 43 - Printing machinery used for printing by means of plates,
cylinders and other printing components of heading 84.42;
other printers, copying machines and facsimile machines,
whether or not combined; parts and accessories thereof.
heading 44 - Machines for extruding, drawing, texturing or cutting man-
made textile materials.
heading 45 - Machines for preparing textile fibres; spinning, doubling or
twisting machines and other machinery for producing textile
yarns; textile reeling or winding (including weft-winding)
machines and machines for preparing textile yarns for use on
the machines of heading 84.46 or 84.47.
heading 46 - Weaving machines (looms).
heading 47 - Knitting machines, stitch-bonding machines and machines for
making gimped yarn, tulle, lace, embroidery, trimmings, braid
or net and machines for tufting.
heading 48 - Auxiliary machinery for use with machines of heading 84.44,
84.45, 84.46 or 84.47 (for example, dobbies, Jacquards,
automatic stop motions, shuttle changing mechanisms); parts
and accessories suitable for use solely or principally with the
machines of this heading or of heading 84.44, 84.45, 84.46 or
84.47 (for example, spindles and spindle flyers, card clothing,
combs, extruding nipples, shuttles, healds and heald-frames,
hosiery needles).
heading 49 - Machinery for the manufacture or finishing of felt or
nonwovens in the piece or in shapes, including machinery for
making felt hats; blocks for making hats.
heading 50 - Household or laundry-type washing machines, including
machines which both wash and dry.
heading 51 - Machinery (other than machines of heading 84.50) for washing,
cleaning, wringing, drying, ironing, pressing (including fusing
presses), bleaching, dyeing, dressing, finishing, coating or
impregnating textile yarns, fabrics or made up textile articles
and machines for applying the paste to the base fabric or other
support used in the manufacture of floor coverings such as
linoleum; machines for reeling, unreeling, folding, cutting or
pinking textile fabrics.
heading 52 - Sewing machines, other than book-sewing machines of
heading 84.40; furniture, bases and covers specially designed
for sewing machines; sewing machine needles.
heading 53 - Machinery for preparing, tanning or working hides, skins or
leather or for making or repairing footwear or other articles of
hides, skins or leather, other than sewing machines.
heading 54 - Converters, ladles, ingot moulds and casting machines, of a kind
used in metallurgy or in metal foundries.
heading 55 - Metal -rolling mills and rolls therefor.
heading 56 - Machine-tools for working any material by removal of material,
by laser or other light or photon beam, ultrasonic, electro-
discharge, electro-chemical, electron beam, ionic-beam or
plasma arc processes; water-jet cutting machines.
heading 57 - Machining centres, unit construction machines (single station)
and multi-station transfer machines, for working metal.
heading 58 - Lathes (including turning centres) for removing metal.
heading 59 - Machine-tools (including way-type unit head machines) for
drilling, boring, milling, threading or tapping by removing
metal, other than lathes (including turning centres) of
heading 84.58.
heading 60 - Machine-tools for deburring, sharpening, grinding, honing,
lapping, polishing or otherwise finishing metal or cermets by
means of grinding stones, abrasives or polishing products, other
than gear cutting, gear grinding or gear finishing machines of
heading 84.61.
heading 61 - Machine-tools for planing, shaping, slotting, broaching, gear
cutting, gear grinding or gear finishing, sawing, cutting-off and
other machine-tools working by removing metal or cermets, not
elsewhere specified or included.
heading 62 - Machine-tools (including presses) for working metal by forging,
hammering or die forging (excluding rolling mills);
machine-tools (including presses, slitting lines and cut-to-length
lines) for working metal by bending, folding, straightening,
flattening, shearing, punching, notching or nibbling (excluding
draw-benches); presses for working metal or metal carbides,
not specified above.
heading 63 - Other machine-tools for working metal or cermets, without
removing material.
heading 64 - Machine-tools for working stone, ceramics, concrete, asbestos-
cement or like mineral materials or for cold working glass
heading 65 - Machine-tools (including machines for nailing, stapling, glueing
or otherwise assembling) for working wood, cork, bone, hard
rubber, hard plastics or similar hard materials.
heading 66 - Parts and accessories suitable for use solely or principally with
the machines of headings 84.56 to 84.65, including work or tool
holders, self-opening dieheads, dividing heads and other special
attachments for the machines; tool holders for any type of tool
for working in the hand.
heading 67 - Tools for working in the hand, pneumatic, hydraulic or with
self-contained electric or non-electric motor.
heading 68 - Machinery and apparatus for soldering, brazing or welding,
whether or not capable of cutting, other than those of
heading 85.15; gas-operated surface tempering machines and
appliances.
heading 70 - Calculating machines and pocket-size data recording,
reproducing and displaying machines with calculating
functions; accounting machines, postage-franking machines,
ticket-issuing machines and similar machines, incorporating a
calculating device; cash registers.
heading 71 - Automatic data processing machines and units thereof;
magnetic or optical readers, machines for transcribing data
onto data media in coded form and machines for processing
such data, not elsewhere specified or included.
heading 72 - Other office machines (for example, hectograph or stencil
duplicating machines, addressing machines, automatic
banknote dispensers, coin-sorting machines, coin-counting or
wrapping machines, pencil-sharpening machines, perforating or
stapling machines).
heading 73 - Parts and accessories (other than covers, carrying cases and the
like) suitable for use solely or principally with machines of
headings 84.70 to 84.72.
heading 74 - Machinery for sorting, screening, separating, washing,
crushing, grinding, mixing or kneading earth, stone, ores or
other mineral substances, in solid (including powder or paste)
form; machinery for agglomerating, shaping or moulding solid
mineral fuels, ceramic paste, unhardened cements, plastering
materials or other mineral products in powder or paste form;
machines for forming foundry moulds of sand.
heading 75 - Machines for assembling electric or electronic lamps, tubes or
valves or flashbulbs, in glass envelopes; machines for
manufacturing or hot working glass or glassware.
heading 76 - Automatic goods-vending machines (for example, postage
stamp, cigarette, food or beverage machines), including money-
changing machines.
heading 77 - Machinery for working rubber or plastics or for the
manufacture of products from these materials, not specified or
included elsewhere in this Chapter.
heading 78 - Machinery for preparing or making up tobacco, not specified or
included elsewhere in this Chapter.
heading 79 - Machines and mechanical appliances having individual
functions, not specified or included elsewhere in this Chapter.
heading 80 - Moulding boxes for metal foundry; mould bases; moulding
patterns; moulds for metal (other than ingot moulds), metal
carbides, glass, mineral materials, rubber or plastics.
heading 81 - Taps, cocks, valves and similar appliances for pipes, boiler
shells, tanks, vats or the like, including pressure-reducing valves
and thermostatically controlled valves.
heading 82 - Ball or roller bearings.
heading 83 - Transmission shafts (including cam shafts and crank shafts)
and cranks; bearing housings and plain shaft bearings; gears
and gearing; ball or roller screws; gear boxes and other speed
changers, including torque converters; flywheels and pulleys,
including pulley blocks; clutches and shaft couplings (including
universal joints).
heading 84 - Gaskets and similar joints of metal sheeting combined with
other material or of two or more layers of metal; sets or
assortments of gaskets and similar joints, dissimilar in
composition, put up in pouches, envelopes or similar packings;
mechanical seals.
heading 85 - Mac hines for additive manufacturing.
heading 86 - Machines and apparatus of a kind used solely or principally for
the manufacture of semiconductor boules or wafers,
semiconductor devices, electronic integrated circuits or flat
panel displays; machines and apparatus specified in Note 11 (C)
to this Chapter; parts and accessories.
heading 87 - Machinery parts, not containing electrical connectors,
insulators, coils, contacts or other electrical features, not
specified or included elsewhere in this Chapter. | {"heading_id": "64"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: casual bib overalls
These are the possible headings: heading 01 - Men’s or boys’ overcoats, car-coats, capes, cloaks, anoraks
(including ski-jackets), wind-cheaters, wind-jackets and similar
articles, other than those of heading 62.03.
heading 02 - Women's or girls' overcoats, car-coats, capes, cloaks, anoraks
(including ski-jackets), wind-cheaters, wind-jackets and similar
articles, other than those of heading 62.04.
heading 03 - Men's or boys' suits, ensembles, jackets, blazers, trousers, bib
and brace overalls, breeches and shorts (other than swimwear).
heading 04 - Women's or girls' suits, ensembles, jackets, blazers, dresses,
skirts, divided skirts, trousers, bib and brace overalls, breeches
and shorts (other than swimwear).
heading 05 - Men's or boys' shirts.
heading 06 - Women's or girls' blous es, shirts and sh irt-blouses.
heading 07 - Men's or boys' singlets and other vests, underpants, briefs,
nightshirts, pyjamas, bathrobes, dressing gowns and similar
articles.
heading 08 - Women's or girls' singlets and other vests, slips, petticoats, briefs,
panties, nightdresses, pyjamas, negligees, bathrobes, dressing
gowns and similar articles.
heading 09 - Babies' garments and clothing accessories.
heading 10 - Garments, made up of fabrics of heading 56.02, 56.03, 59.03,
59.06 or 59.07.
heading 11 - Track suits, ski suits and swimwear; other garments.
heading 12 - Brassieres, girdles, corsets, braces, suspenders, garters and
similar articles and parts thereof, whether or not knitted or
crocheted.
heading 13 - Handkerchiefs.
heading 14 - Shawls, scarves, mufflers, mantillas, vei ls and the like.
heading 15 - Ties, bow ties and cravats.
heading 16 - Gloves, mittens and mitts.
heading 17 - Other made up clothing accessories; parts of garments or of
clothing accessories, other than those of heading 62.12 | {"heading_id": "03"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: flat steel products
These are the possible headings: heading 01 - Pig iron and spiegeleisen in pigs, blocks or other primary forms.
heading 02 - Ferro -alloys.
heading 03 - Ferrous products obtained by direct reduction of iron ore and
other spongy ferrous products, in lumps, pellets or similar forms;
iron having a minimum purity by weight of 99.94 %, in lumps,
pellets or similar forms.
heading 04 - Ferrous waste and scrap; remelting scrap ingots of iron or steel.
heading 05 - Granules and powders, of pig iron, spiegeleisen, iron or steel.
heading 06 - Iron and non-alloy steel in ingots or other primary forms
(excluding iron of heading 72.03).
heading 07 - Semi -finished products of iron or non -alloy steel.
heading 08 - Flat-rolled products of iron or non-alloy steel, of a width of
600 mm or more, hot-rolled, not clad, plated or coated.
- In coils, not further worked than hot-rolled, with patterns i
heading 09 - Flat-rolled products of iron or non-alloy steel, of a width of
600 mm or more, cold-rolled (cold-reduced), not clad, plated or
coated.
heading 10 - Flat-rolled products of iron or non-alloy steel, of a width of
600 mm or more, clad, plated or coated.
heading 11 - Flat-rolled products of iron or non-alloy steel, of a width of less
than 600 mm, not clad, plated or coated.
heading 12 - Flat-rolled products of iron or non-alloy steel, of a width of less
than 600 mm, clad, plated or coated.
heading 13 - Bars and rods, hot-rolled, in irregularly wound coils, of iron or
non-alloy steel.
heading 14 - Other bars and rods of iron or non-alloy steel, not further
worked than forged, hot-rolled, hot-drawn or hot-extruded, but
including those twisted after rolling.
heading 15 - Other bars and rods of iron or non -alloy steel.
heading 16 - Angles, shapes and sections of iron or non -alloy steel.
heading 17 - Wire of iron or non -alloy steel.
heading 18 - Stainless steel in ingots or other primary forms; semi-finished
products of stainless steel.
heading 19 - Flat-rolled produc ts of stainless steel, of a width of 600 mm or more
heading 20 - Flat-rolled products of stainless steel, of a width of less than 600mm
heading 21 - Bars and rods, hot-rolled, in irregularly wound coils, of stainless
steel
heading 22 - Other bars and rods of stainless steel; angles, shapes and sections
of stainless steel.
heading 23 - Wire of stainless steel.
heading 24 - Other alloy steel in ingots or other primary forms; semi-finished
products of other alloy steel.
heading 25 - Flat-rolled products of other alloy steel, of a width of 600 mm or
more.
heading 26 - Flat-rolled products of other alloy steel, of a width of less than 600mm
heading 27 - Bars and rods, hot-rolled, in irregularly wound coils, of other
alloy steel.
heading 28 - Other bars and rods of other alloy steel; angles, shapes and
sections, of other alloy steel; hollow drill bars and rods, of alloy
or non-alloy steel.
heading 29 - Wire of other alloy steel. | {"heading_id": "25"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: polyester raw
These are the possible headings: heading 01 - Synthetic filament tow.
heading 02 - Artificial filament tow.
heading 03 - Synthetic staple fibres, not carded, combed or otherwise
processed for spinning.
heading 04 - Artificial staple fibres, not carded, combed or otherwise
processed for spinning.
heading 05 - Waste (including noils, yarn waste and garnetted stock) of man -made fibres
heading 06 - Synthetic staple fibres, carded, combed or otherwise processed
for spinning.
heading 07 - Artificial staple fibres, carded, combed or otherwise processed
for spinning.
heading 08 - Sewing thread of man-made staple fibres, whether or not put up
for retail sale.
heading 09 - Yarn (other than sewing thread) of synthetic staple fibres, not
put up for retail sale.
heading 10 - Yarn (other than sewing thread) of artificial staple fibres, not put
up for retail sale.
heading 11 - Yarn (other than sewing thread) of man-made staple fibres, put
up for retail sale.
heading 12 - Woven fabrics of synthetic staple fibres, containing 85 % or more
by weight of synthetic staple fibres.
heading 13 - Woven fabrics of synthetic staple fibres, containing less than
85 % by weight of such fibres, mixed mainly or solely with
cotton, of a weight not exceeding 170 g/m².
heading 14 - Woven fabrics of synthetic staple fibres, containing less than
85 % by weight of such fibres, mixed mainly or solely with
cotton, of a weight exceeding 170 g/m².
heading 15 - Other woven fabrics of synthetic staple fibres.
heading 16 - Woven fabrics of artificial staple fibres. | {"heading_id": "03"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: festive string lights
These are the possible headings: heading 01 - Seats (other than those of heading 94.02), whether or not
convertible into beds, and parts thereof.
heading 02 - Medical, surgical, dental or veterinary furniture (for example,
operating tables, examination tables, hospital beds with
mechanical fittings, dentists' chairs); barbers' chairs and similar
chairs, having rotating as well as both reclining and elevating
movements; parts of the foregoing articles.
heading 03 - Other furniture and parts thereof.
heading 04 - Mattress supports; articles of bedding and similar furnishing (for
example, mattresses, quilts, eiderdowns, cushions, pouffes and
pillows) fitted with springs or stuffed or internally fitted with any
material or of cellular rubber or plastics, whether or not covered.
heading 05 - Luminaires and lighting fittings including searchlights and
spotlights and parts thereof, not elsewhere specified or included;
illuminated signs, illuminated name-plates and the like, having a
permanently fixed light source, and parts thereof not elsewhere
specified or included.
heading 06 - Prefabricated buildings. | {"heading_id": "05"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: silicon steel
These are the possible headings: heading 01 - Pig iron and spiegeleisen in pigs, blocks or other primary forms.
heading 02 - Ferro -alloys.
heading 03 - Ferrous products obtained by direct reduction of iron ore and
other spongy ferrous products, in lumps, pellets or similar forms;
iron having a minimum purity by weight of 99.94 %, in lumps,
pellets or similar forms.
heading 04 - Ferrous waste and scrap; remelting scrap ingots of iron or steel.
heading 05 - Granules and powders, of pig iron, spiegeleisen, iron or steel.
heading 06 - Iron and non-alloy steel in ingots or other primary forms
(excluding iron of heading 72.03).
heading 07 - Semi -finished products of iron or non -alloy steel.
heading 08 - Flat-rolled products of iron or non-alloy steel, of a width of
600 mm or more, hot-rolled, not clad, plated or coated.
- In coils, not further worked than hot-rolled, with patterns i
heading 09 - Flat-rolled products of iron or non-alloy steel, of a width of
600 mm or more, cold-rolled (cold-reduced), not clad, plated or
coated.
heading 10 - Flat-rolled products of iron or non-alloy steel, of a width of
600 mm or more, clad, plated or coated.
heading 11 - Flat-rolled products of iron or non-alloy steel, of a width of less
than 600 mm, not clad, plated or coated.
heading 12 - Flat-rolled products of iron or non-alloy steel, of a width of less
than 600 mm, clad, plated or coated.
heading 13 - Bars and rods, hot-rolled, in irregularly wound coils, of iron or
non-alloy steel.
heading 14 - Other bars and rods of iron or non-alloy steel, not further
worked than forged, hot-rolled, hot-drawn or hot-extruded, but
including those twisted after rolling.
heading 15 - Other bars and rods of iron or non -alloy steel.
heading 16 - Angles, shapes and sections of iron or non -alloy steel.
heading 17 - Wire of iron or non -alloy steel.
heading 18 - Stainless steel in ingots or other primary forms; semi-finished
products of stainless steel.
heading 19 - Flat-rolled produc ts of stainless steel, of a width of 600 mm or more
heading 20 - Flat-rolled products of stainless steel, of a width of less than 600mm
heading 21 - Bars and rods, hot-rolled, in irregularly wound coils, of stainless
steel
heading 22 - Other bars and rods of stainless steel; angles, shapes and sections
of stainless steel.
heading 23 - Wire of stainless steel.
heading 24 - Other alloy steel in ingots or other primary forms; semi-finished
products of other alloy steel.
heading 25 - Flat-rolled products of other alloy steel, of a width of 600 mm or
more.
heading 26 - Flat-rolled products of other alloy steel, of a width of less than 600mm
heading 27 - Bars and rods, hot-rolled, in irregularly wound coils, of other
alloy steel.
heading 28 - Other bars and rods of other alloy steel; angles, shapes and
sections, of other alloy steel; hollow drill bars and rods, of alloy
or non-alloy steel.
heading 29 - Wire of other alloy steel. | {"heading_id": "25"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: assembled furskin
These are the possible headings: heading 01 - Raw furskins (including heads, tails, paws and other pieces or
cuttings, suitable for furriers' use), other than raw hides and
skins of heading 41.01, 41.02 or 41.03.
heading 02 - Tanned or dressed furskins (including heads, tails, paws and
other pieces or cuttings), unassembled, or assembled (without the
addition of other materials) other than those of heading 43.03.
heading 03 - Articles of apparel, clothing accessories and other articles o f
heading 04 - Artificial fur and articles thereof. | {"heading_id": "02"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: smoked herring can
These are the possible headings: heading 01 - Sausages and similar products, of meat, meat offal, blood or
insects; food preparations based on these products.
heading 02 - Other prepar ed or preserved meat, meat offal, blood or insects.
heading 03 - Extracts and juices of meat, fish or crustaceans, molluscs or
other aquatic invertebrates.
heading 04 - Prepared or preserved fish; caviar and caviar substitutes
prepared from fish eggs .
heading 05 - Crustaceans, molluscs and other aquatic invertebrates, prepared
or preserved . | {"heading_id": "04"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: dibromo compounds
These are the possible headings: heading 01 - Acyclic hydrocarbons .
heading 02 - Cyclic hydrocarbons .
heading 03 - Halogenated derivatives of hydrocarbons .
heading 04 - Sulphonated, nitrated or nitrosated derivatives of hydrocarbons,
heading 05 - Acyclic alcohols and their halogenated, sulphonated, nitrated or
heading 06 - Cyclic alcohols and their halogenated, sulphonated, nitrated or
heading 07 - Phenols; phenol -alcohols .
heading 08 - Halogenated, sulphonated, nitrated or nitrosated derivatives of
heading 09 - Ethers, ether -alcohols, ether -phenols, ether -alcohol -phenols,
heading 10 - Epoxides, epoxyalcohols, epoxyphenols and epoxyethers, with a
heading 12 - Aldehydes, whether or not with other oxygen function; cyclic
heading 15 - Saturated acyclic monocarboxylic acids and their anhydrides,
heading 16 - Unsaturated acyclic monocarboxylic acids, cyclic monocarboxylic
heading 17 - Polycarboxylic acids, their anhydrides, halides, peroxides and
heading 18 - Carboxylic acids with additional oxygen function and their
heading 19 - Phosphoric esters and their salts, including lactophosphates;
heading 20 - Esters of other inorganic acids of non -metals (excluding esters
heading 21 - Amine -function compounds.
heading 22 - Oxygen -function amino -compounds.
heading 23 - Quaternary ammonium salts and hydroxides; lecithins and
heading 24 - Carboxyamide -function compounds; amide -function compounds
heading 25 - Carboxyimide -function compounds (including saccharin and its
heading 26 - Nitrile -function compounds.
heading 30 - Organo -sulphur compounds.
heading 31 - Other organo -inorganic compounds .
heading 32 - Heterocyclic compounds with oxygen hetero -atom(s) only.
heading 33 - Heterocyclic compounds with nitrogen hetero -atom(s) only.
heading 34 - Nucleic acids and their salts, whether or not chemically defined;
heading 35 - Sulphonamides.
heading 36 - Provitamins and vitamins, natural or reproduced by synthesis
heading 37 - Hormones, prostaglandins, thromboxanes and leukotrienes,
heading 38 - Glycosides, natural or reproduced by synthesis, and their salts,
heading 39 - Alkaloids, natural or reproduced by synthesis, and their salts, | {"heading_id": "19"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: cheap safety razor
These are the possible headings: heading 01 - Hand tools, the following : spades, shovels, mattocks, picks, hoes,
forks and rakes; axes, bill hooks and similar hewing tools;
secateurs and pruners of any kind; scythes, sickles, hay knives,
hedge shears, timber wedges and other tools of a kind used in
agriculture, horticulture or forestry.
heading 02 - Hand saws; blades for saws of all kinds (including slitting,
slotting or toothless saw blades).
heading 03 - Files, rasps, pliers (including cutting pliers), pincers, tweezers,
metal cutting shears, pipe-cutters, bolt croppers, perforating
punches and similar hand tools.
heading 04 - Hand-operated spanners and wrenches (including torque meter
wrenches but not including tap wrenches); interchangeable
spanner sockets, with or without handles.
heading 05 - Hand tools (including glaziers' diamonds), not elsewhere
specified or included; blow lamps; vices, clamps and the like,
other than accessories for and parts of, machine-tools or water-
jet cutting machines; anvils; portable forges; hand or pedal-
operated grinding wheels with frameworks.
heading 06 - Tools of two or more of the headings 82.02 to 82.05, put up in sets
for retail sale
heading 07 - Interchangeable tools for hand tools, whether or not power-
operated, or for machine-tools (for example, for pressing,
stamping, punching, tapping, threading, drilling, boring,
broaching, milling, turning or screw driving), including dies for
drawing or extruding metal, and rock drilling or earth boring
tools.
heading 08 - Knives and cutting blades, for machines or for mechanical
appliances.
heading 09 - Plates, sticks, tips and the like for tools, unmounted, of cermets.
heading 10 - Hand-operated mechanical appliances, weighing 10 kg or less,
used in the preparation, conditioning or serving of food or drink.
heading 11 - Knives with cutting blades, serrated or not (including pruning
knives), other than knives of heading 82.08, and blades therefor.
heading 12 - Razors and razor blades (including razor blade blanks in strips).
heading 13 - Scissors, tailors' shears and similar shears, and blades therefor.
heading 14 - Other articles of cutlery (for example, hair clippers, butchers' or
kitchen cleavers, choppers and mincing knives, paper knives);
manicure or pedicure sets and instruments (including nail files).
heading 15 - Spoons, forks, ladles, skimmers, cake-servers, fish-knives, butter-
knives, sugar tongs and similar kitchen or tableware. | {"heading_id": "12"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: haddock frzn
These are the possible headings: heading 01 - Live fish .
heading 02 - Fish, fresh or chilled, excluding fish fillets and other fish meat of
heading 03.04.
heading 03 - Fish, frozen, excluding fish fillets and other fish meat of heading
03.04.
heading 04 - Fish fillets and other fish meat (whether or not minced), fresh,
chilled or frozen.
heading 05 - Fish, dried, salted or in brine; smoked fish, whether or not
cooked before or during the smoking process.
heading 06 - Crustaceans, whether in shell or not, live, fresh, chilled, frozen,
dried, salted or in brine; smoked crustaceans, whether in shell
or not, whether or not cooked before or during the smoking
process; crustaceans, in shell, cooked by steaming or by boiling
in water, whether or not chilled, frozen, dried, salted or in
brine.
heading 07 - Molluscs, whether in shell or not, live, fresh, chilled, frozen,
dried, salted or in brine; smoked molluscs, whether in shell or
not, whether or not cooked before or during the smoking
process.
heading 08 - Aquatic invertebrates other than crustaceans and molluscs, live,
fresh, chilled, frozen, dried, salted or in brine; smoked aquatic
invertebrates other than crustaceans and molluscs, whether or
not cooked before or during the smoking process.
heading 09 - Flours, meals and pellets of fish, crustaceans, molluscs and
other aquatic invertebrates, fit for human consumption. | {"heading_id": "03"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: newspaper pdf
These are the possible headings: heading 01 - Printed books, brochures, leaflets and similar printed matter,
whether or not in single sheets.
heading 02 - Newspapers, journals and periodicals, whether or not illustrated
or containing advertising material.
heading 03 - Children's picture, drawing or colouring books.
heading 04 - Music, printed or in manuscript, whether or not bound or
illustrated.
heading 05 - Maps and hydrographic or similar charts of all kinds, including
heading 06 - Plans and drawings for architectural, engineering, industrial,
commercial, topographical or similar purposes, being originals
drawn by hand; hand-written texts; photographic reproductions
on sensitised paper and carbon copies of the foregoing.
heading 07 - Unused postage, revenue or similar stamps of current or new
issue in the country in which they have, or will have, a
recognised face value; stamp-impressed paper; banknotes;
cheque forms; stock, share or bond certificates and similar
documents of title.
heading 08 - Transfers (d ecalcomanias).
heading 09 - Printed or illustrated postcards; printed cards bearing personal
greetings, messages or announcements, whether or not
illustrated, with or without envelopes or trimmings.
heading 10 - Calendars of any kind, printed, including calendar blocks.
heading 11 - Other printed matter, including printed pictures and
photographs. | {"heading_id": "11"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: butter churner
These are the possible headings: heading 01 - Nuclear reactors; fuel elements (cartridges), non-irradiated, for
nuclear reactors; machinery and apparatus for isotopic
separation.
heading 02 - Steam or other vapour generating boilers (other than central
heating hot water boilers capable also of producing low pressure
steam); super-heated water boilers.
heading 03 - Central heating boilers other than those of heading 84.02.
heading 04 - Auxiliary plant for use with boilers of heading 84.02 or 84.03 (for
example, economisers, super-heaters, soot removers, gas
recoverers); condensers for steam or other vapour power units.
heading 05 - Producer gas or water gas generators, with or without their
purifiers; acetylene gas generators and similar water process gas
generators, with or without their purifiers.
heading 06 - Steam turbines and other vapour turbines.
heading 07 - Spark-ignition reciprocating or rotary internal combustion
piston engines.
heading 08 - Compression-ignition internal combustion piston engines (diesel
or semi-diesel engines).
heading 09 - Parts suitable for use solely or principally with the engines of
heading 84.07 or 84.08.
heading 10 - Hydraulic turbines, water wheels, and regulators therefor.
heading 11 - Turbo -jets, turbo -propellers and other gas turbines.
heading 12 - Othe r engines and motors.
heading 13 - Pumps for liquids, whether or not fitted with a measuring device;
liquid elevators.
heading 14 - Air or vacuum pumps, air or other gas compressors and fans;
ventilating or recycling hoods incorporating a fan, whether or not
fitted with filters; gas-tight biological safety cabinets, whether
or not fitted with filters.
heading 15 - Air conditioning machines, comprising a motor-driven fan and
elements for changing the temperature and humidity, including
those machines in which the humidity cannot be separately
regulated.
heading 16 - Furnace burners for liquid fuel, for pulverised solid fuel or for
gas; mechanical stokers, including their mechanical grates,
mechanical ash dischargers and similar appliances.
heading 17 - Industrial or laboratory furnaces and ovens, including
incinerators, non-electric.
heading 18 - Refrigerators, freezers and other refrigerating or freezing
equipment, electric or other; heat pumps other than air
conditioning machines of heading 84.15.
heading 19 - Machinery, plant or laboratory equipment, whether or not
electrically heated (excluding furnaces, ovens and other
equipment of heading 85.14), for the treatment of materials by a
process involving a change of temperature such as heating,
cooking, roasting, distilling, rectifying, sterilising, pasteurising,
steaming, drying, evaporating, vaporising, condensing or cooling,
other than machinery or plant of a kind used for domestic
purposes; instantaneous or storage water heaters, non-electric.
heading 20 - Calendering or other rolling machines, other than for metals or
glass, and cylinders therefor.
heading 21 - Centrifuges, including centrifugal dryers; filtering or purifying
machinery and apparatus, for liquids or gases.
heading 22 - Dish washing machines; machinery for cleaning or drying bottles
or other containers; machinery for filling, closing, sealing or
labelling bottles, cans, boxes, bags or other containers; machinery
for capsuling bottles, jars, tubes and similar containers; other
packing or wrapping machinery (including heat-shrink wrapping
machinery); machinery for aerating beverages.
heading 23 - Weighing machinery (excluding balances of a sensitivity of 5 cg
or better), including weight operated counting or checking
machines; weighing machine weights of all kinds.
heading 24 - Mechanical appliances (whether or not hand-operated) for
projecting, dispersing or spraying liquids or powders; fire
extinguishers, whether or not charged; spray guns and similar
appliances; steam or sand blasting machines and similar jet
projecting machines.
heading 25 - Pulley tackle and hoists other than skip hoists; winches and
capstans; jacks.
heading 26 - Ships' derricks; cranes, including cable cranes; mobile lifting
frames, straddle carriers and works trucks fitted with a crane.
heading 27 - Fork-lift trucks; other works trucks fitted with lifting or handling
equipment.
heading 28 - Other lifting, handling, loading or unloading machinery (for
example, lifts, escalators, conveyors, teleferics).
heading 29 - Self-propelled bulldozers, angledozers, graders, levellers,
scrapers, mechanical shovels, excavators, shovel loaders, tamping
machines and road rollers.
heading 30 - Other moving, grading, levelling, scraping, excavating, tamping,
compacting, extracting or boring machinery, for earth, minerals
or ores; pile-drivers and pile-extractors; snow-ploughs and snow-
blowers.
heading 31 - Parts suitable for use solely or principally with the machinery of
headings 84.25 to 84.30.
heading 32 - Agricultural, horticultural or forestry machinery for soil
preparation or cultivation; lawn or sports-ground rollers.
heading 33 - Harvesting or threshing machinery, including straw or fodder
balers; grass or hay mowers; machines for cleaning, sorting or
grading eggs, fruit or other agricultural produce, other than
machinery of heading 84.37.
heading 34 - Milking machines and dairy ma chinery.
heading 35 - Presses, crushers and similar machinery used in the manufacture
of wine, cider, fruit juices or similar beverages.
heading 36 - Other agricultural, horticultural, forestry, poultry-keeping or
bee-keeping machinery, including germination plant fitted with
mechanical or thermal equipment; poultry incubators and
brooders.
heading 37 - Machines for cleaning, sorting or grading seed, grain or dried
leguminous vegetables; machinery used in the milling industry or
for the working of cereals or dried leguminous vegetables, other
than farm-type machinery.
heading 38 - Machinery, not specified or included elsewhere in this Chapter,
for the industrial preparation or manufacture of food or drink,
other than machinery for the extraction or preparation of
animal or fixed vegetable or microbial fats or oils.
heading 39 - Machinery for making pulp of fibrous cellulosic material or for
making or finishing paper or paperboard.
heading 40 - Book -binding machinery, including book -sewing machines.
heading 41 - Other machinery for making up paper pulp, paper or
paperboard, including cutting machines of all kinds.
heading 42 - Machinery, apparatus and equipment (other than the machines
of headings 84.56 to 84.65) for preparing or making plates,
cylinders or other printing components; plates, cylinders and
other printing components; plates, cylinders and lithographic
stones, prepared for printing purposes (for example, planed,
grained or polished).
heading 43 - Printing machinery used for printing by means of plates,
cylinders and other printing components of heading 84.42;
other printers, copying machines and facsimile machines,
whether or not combined; parts and accessories thereof.
heading 44 - Machines for extruding, drawing, texturing or cutting man-
made textile materials.
heading 45 - Machines for preparing textile fibres; spinning, doubling or
twisting machines and other machinery for producing textile
yarns; textile reeling or winding (including weft-winding)
machines and machines for preparing textile yarns for use on
the machines of heading 84.46 or 84.47.
heading 46 - Weaving machines (looms).
heading 47 - Knitting machines, stitch-bonding machines and machines for
making gimped yarn, tulle, lace, embroidery, trimmings, braid
or net and machines for tufting.
heading 48 - Auxiliary machinery for use with machines of heading 84.44,
84.45, 84.46 or 84.47 (for example, dobbies, Jacquards,
automatic stop motions, shuttle changing mechanisms); parts
and accessories suitable for use solely or principally with the
machines of this heading or of heading 84.44, 84.45, 84.46 or
84.47 (for example, spindles and spindle flyers, card clothing,
combs, extruding nipples, shuttles, healds and heald-frames,
hosiery needles).
heading 49 - Machinery for the manufacture or finishing of felt or
nonwovens in the piece or in shapes, including machinery for
making felt hats; blocks for making hats.
heading 50 - Household or laundry-type washing machines, including
machines which both wash and dry.
heading 51 - Machinery (other than machines of heading 84.50) for washing,
cleaning, wringing, drying, ironing, pressing (including fusing
presses), bleaching, dyeing, dressing, finishing, coating or
impregnating textile yarns, fabrics or made up textile articles
and machines for applying the paste to the base fabric or other
support used in the manufacture of floor coverings such as
linoleum; machines for reeling, unreeling, folding, cutting or
pinking textile fabrics.
heading 52 - Sewing machines, other than book-sewing machines of
heading 84.40; furniture, bases and covers specially designed
for sewing machines; sewing machine needles.
heading 53 - Machinery for preparing, tanning or working hides, skins or
leather or for making or repairing footwear or other articles of
hides, skins or leather, other than sewing machines.
heading 54 - Converters, ladles, ingot moulds and casting machines, of a kind
used in metallurgy or in metal foundries.
heading 55 - Metal -rolling mills and rolls therefor.
heading 56 - Machine-tools for working any material by removal of material,
by laser or other light or photon beam, ultrasonic, electro-
discharge, electro-chemical, electron beam, ionic-beam or
plasma arc processes; water-jet cutting machines.
heading 57 - Machining centres, unit construction machines (single station)
and multi-station transfer machines, for working metal.
heading 58 - Lathes (including turning centres) for removing metal.
heading 59 - Machine-tools (including way-type unit head machines) for
drilling, boring, milling, threading or tapping by removing
metal, other than lathes (including turning centres) of
heading 84.58.
heading 60 - Machine-tools for deburring, sharpening, grinding, honing,
lapping, polishing or otherwise finishing metal or cermets by
means of grinding stones, abrasives or polishing products, other
than gear cutting, gear grinding or gear finishing machines of
heading 84.61.
heading 61 - Machine-tools for planing, shaping, slotting, broaching, gear
cutting, gear grinding or gear finishing, sawing, cutting-off and
other machine-tools working by removing metal or cermets, not
elsewhere specified or included.
heading 62 - Machine-tools (including presses) for working metal by forging,
hammering or die forging (excluding rolling mills);
machine-tools (including presses, slitting lines and cut-to-length
lines) for working metal by bending, folding, straightening,
flattening, shearing, punching, notching or nibbling (excluding
draw-benches); presses for working metal or metal carbides,
not specified above.
heading 63 - Other machine-tools for working metal or cermets, without
removing material.
heading 64 - Machine-tools for working stone, ceramics, concrete, asbestos-
cement or like mineral materials or for cold working glass
heading 65 - Machine-tools (including machines for nailing, stapling, glueing
or otherwise assembling) for working wood, cork, bone, hard
rubber, hard plastics or similar hard materials.
heading 66 - Parts and accessories suitable for use solely or principally with
the machines of headings 84.56 to 84.65, including work or tool
holders, self-opening dieheads, dividing heads and other special
attachments for the machines; tool holders for any type of tool
for working in the hand.
heading 67 - Tools for working in the hand, pneumatic, hydraulic or with
self-contained electric or non-electric motor.
heading 68 - Machinery and apparatus for soldering, brazing or welding,
whether or not capable of cutting, other than those of
heading 85.15; gas-operated surface tempering machines and
appliances.
heading 70 - Calculating machines and pocket-size data recording,
reproducing and displaying machines with calculating
functions; accounting machines, postage-franking machines,
ticket-issuing machines and similar machines, incorporating a
calculating device; cash registers.
heading 71 - Automatic data processing machines and units thereof;
magnetic or optical readers, machines for transcribing data
onto data media in coded form and machines for processing
such data, not elsewhere specified or included.
heading 72 - Other office machines (for example, hectograph or stencil
duplicating machines, addressing machines, automatic
banknote dispensers, coin-sorting machines, coin-counting or
wrapping machines, pencil-sharpening machines, perforating or
stapling machines).
heading 73 - Parts and accessories (other than covers, carrying cases and the
like) suitable for use solely or principally with machines of
headings 84.70 to 84.72.
heading 74 - Machinery for sorting, screening, separating, washing,
crushing, grinding, mixing or kneading earth, stone, ores or
other mineral substances, in solid (including powder or paste)
form; machinery for agglomerating, shaping or moulding solid
mineral fuels, ceramic paste, unhardened cements, plastering
materials or other mineral products in powder or paste form;
machines for forming foundry moulds of sand.
heading 75 - Machines for assembling electric or electronic lamps, tubes or
valves or flashbulbs, in glass envelopes; machines for
manufacturing or hot working glass or glassware.
heading 76 - Automatic goods-vending machines (for example, postage
stamp, cigarette, food or beverage machines), including money-
changing machines.
heading 77 - Machinery for working rubber or plastics or for the
manufacture of products from these materials, not specified or
included elsewhere in this Chapter.
heading 78 - Machinery for preparing or making up tobacco, not specified or
included elsewhere in this Chapter.
heading 79 - Machines and mechanical appliances having individual
functions, not specified or included elsewhere in this Chapter.
heading 80 - Moulding boxes for metal foundry; mould bases; moulding
patterns; moulds for metal (other than ingot moulds), metal
carbides, glass, mineral materials, rubber or plastics.
heading 81 - Taps, cocks, valves and similar appliances for pipes, boiler
shells, tanks, vats or the like, including pressure-reducing valves
and thermostatically controlled valves.
heading 82 - Ball or roller bearings.
heading 83 - Transmission shafts (including cam shafts and crank shafts)
and cranks; bearing housings and plain shaft bearings; gears
and gearing; ball or roller screws; gear boxes and other speed
changers, including torque converters; flywheels and pulleys,
including pulley blocks; clutches and shaft couplings (including
universal joints).
heading 84 - Gaskets and similar joints of metal sheeting combined with
other material or of two or more layers of metal; sets or
assortments of gaskets and similar joints, dissimilar in
composition, put up in pouches, envelopes or similar packings;
mechanical seals.
heading 85 - Mac hines for additive manufacturing.
heading 86 - Machines and apparatus of a kind used solely or principally for
the manufacture of semiconductor boules or wafers,
semiconductor devices, electronic integrated circuits or flat
panel displays; machines and apparatus specified in Note 11 (C)
to this Chapter; parts and accessories.
heading 87 - Machinery parts, not containing electrical connectors,
insulators, coils, contacts or other electrical features, not
specified or included elsewhere in this Chapter. | {"heading_id": "34"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: capacitor accesories
These are the possible headings: heading 01 - Electric motors and gene rators (excluding generating sets).
heading 02 - Electric generating sets and rotary converters.
heading 03 - Parts suitable for use solely or principally with the machines of
heading 85.01 or 85.02.
heading 04 - Electrical transformers, static converters (for example,
rectifiers) and inductors.
heading 05 - Electro-magnets; permanent magnets and articles intended to
become permanent magnets after magnetisation; electro-
magnetic or permanent magnet chucks, clamps and similar
holding devices; electro-magnetic couplings, clutches and
brakes; electro-magnetic lifting heads.
heading 06 - Primary cells and primary batteries.
heading 07 - Electric accumulators, including separators therefor, whether
or not rectangular (including square).
heading 08 - Vacuum cleaners.
heading 09 - Electro-mechanical domestic appliances, with self-contained
electric motor, other than vacuum cleaners of heading 85.08.
heading 10 - Shavers, hair clippers and hair-removing appliances, with self-
contained electric motor.
heading 11 - Electrical ignition or starting equipment of a kind used for
spark-ignition or compression-ignition internal combustion
engines (for example, ignition magnetos, magneto-dynamos,
ignition coils, sparking plugs and glow plugs, starter motors);
generators (for example, dynamos, alternators) and cut-outs of
a kind used in conjunction with such engines.
heading 12 - Electrical lighting or signalling equipment (excluding articles of
heading 85.39), windscreen wipers, defrosters and demisters, of
a kind used for cycles or motor vehicles.
heading 13 - Portable electric lamps designed to function by their own source
of energy (for example, dry batteries, accumulators, magnetos),
other than lighting equipment of heading 85.12.
heading 14 - Industrial or laboratory electric furnaces and ovens (including
those functioning by induction or dielectric loss); other
industrial or laboratory equipment for the heat treatment of
materials by induction or dielectric loss.
heading 15 - Electric (including electrically heated gas), laser or other light
or photon beam, ultrasonic, electron beam, magnetic pulse or
plasma arc soldering, brazing or welding machines and
apparatus, whether or not capable of cutting; electric machines
and apparatus for hot spraying of metals or cermets.
heading 16 - Electric instantaneous or storage water heaters and immersion
heaters; electric space heating apparatus and soil heating
apparatus; electro-thermic hair-dressing apparatus (for
example, hair dryers, hair curlers, curling tong heaters) and
hand dryers; electric smoothing irons; other electro-thermic
appliances of a kind used for domestic purposes; electric
heating resistors, other than those of heading 85.45.
heading 17 - Telephone sets, including smartphones and other telephones for
cellular networks or for other wireless networks; other
apparatus for the transmission or reception of voice, images or
other data, including apparatus for communication in a wired
or wireless network (such as a local or wide area network),
other than transmission or reception apparatus of
heading 84.43, 85.25, 85.27 or 85.28.
heading 18 - Microphones and stands therefor; loudspeakers, whether or not
mounted in their enclosures; headphones and earphones,
whether or not combined with a microphone, and sets consisting
of a microphone and one or more loudspeakers; audio-
frequency electric amplifiers; electric sound amplifier sets.
heading 19 - Sound recording or reproducing apparatus.
heading 21 - Video recording or reproducing apparatus, whether or not
incorporating a video tuner.
heading 22 - Parts and accessories suitable for use solely or principally with
the apparatus of heading 85.19 or 85.21.
heading 23 - Discs, tapes, solid-state non-volatile storage devices, “smart
cards” and other media for the recording of sound or of other
phenomena, whether or not recorded, including matrices and
masters for the production of discs, but excluding products of
Chapter 37.
heading 24 - Flat panel display modules, whether or not incorporating touch-
sensitive screens.
heading 25 - Transmission apparatus for radio-broadcasting or television,
whether or not incorporating reception apparatus or sound
recording or reproducing apparatus; television cameras, digital
cameras and video camera recorders.
heading 26 - Radar apparatus, radio navigational aid apparatus and radio
remote control apparatus.
heading 27 - Reception apparatus for radio-broadcasting, whether or not
combined, in the same housing, with sound recording or
reproducing apparatus or a clock.
heading 28 - Monitors and projectors, not incorporating television reception
apparatus; reception apparatus for television, whether or not
incorporating radio-broadcast receivers or sound or video
recording or reproducing apparatus.
heading 29 - Parts suitable for use solely or principally with the apparatus of
headings 85.24 to 85.28.
heading 30 - Electrical signalling, safety or traffic control equipment for
railways, tramways, roads, inland waterways, parking facilities,
port installations or airfields (other than those of
heading 86.08).
heading 31 - Electric sound or visual signalling apparatus (for example, bells,
sirens, indicator panels, burglar or fire alarms), other than
those of heading 85.12 or 85.30.
heading 32 - Electrical capacitors, fixed, variable or adjustable (pre -set).
heading 33 - Electrical resistors (including rheostats and potentiometers),
other than heating resistors.
heading 34 - Printed circuits.
heading 35 - Electrical apparatus for switching or protecting electrical
circuits, or for making connections to or in electrical circuits
(for example, switches, fuses, lightning arresters, voltage
limiters, surge suppressors, plugs and other connectors,
junction boxes), for a voltage exceeding 1,000 volts.
heading 36 - Electrical apparatus for switching or protecting electrical
circuits, or for making connections to or in electrical circuits
(for example, switches, relays, fuses, surge suppressors, plugs,
sockets, lamp-holders and other connectors, junction boxes), for
a voltage not exceeding 1,000 volts; connectors for optical
fibres, optical fibre bundles or cables.
heading 37 - Boards, panels, consoles, desks, cabinets and other bases,
equipped with two or more apparatus of heading 85.35 or 85.36,
for electric control or the distribution of electricity, including
those incorporating instruments or apparatus of Chapter 90,
and numerical control apparatus, other than switching
apparatus of heading 85.17.
heading 38 - Parts suitable for use solely or principally with the apparatus of
heading 85.35, 85.36 or 85.37.
heading 39 - Electric filament or discharge lamps, including sealed beam
lamp units and ultra-violet or infra-red lamps; arc-lamps; light-
emitting diode (LED) light sources.
heading 40 - Thermionic, cold cathode or photo-cathode valves and tubes
(for example, vacuum or vapour or gas filled valves and tubes,
mercury arc rectifying valves and tubes, cathode-ray tubes,
television camera tubes).
heading 41 - Semiconductor devices (for example, diodes, transistors,
semiconductor-based transducers); photosensitive
semiconductor devices, including photovoltaic cells whether or
not assembled in modules or made up into panels; light-
emitting diodes (LED), whether or not assembled with other
light-emitting diodes (LED); mounted piezo-electric crystals.
heading 42 - Electronic integrated circuits.
heading 43 - Electrical machines and apparatus, having individual functions,
not specified or included elsewhere in this Chapter.
heading 44 - Insulated (including enamelled or anodised) wire, cable
(including co-axial cable) and other insulated electric
conductors, whether or not fitted with connectors; optical fibre
cables, made up of individually sheathed fibres, whether or not
assembled with electric conductors or fitted with connectors.
heading 45 - Carbon electrodes, carbon brushes, lamp carbons, battery
carbons and other articles of graphite or other carbon, with or
without metal, of a kind used for electrical purposes.
heading 46 - Electrical insulators of any material.
heading 47 - Insulating fittings for electrical machines, appliances or
equipment, being fittings wholly of insulating material apart
from any minor components of metal (for example, threaded
sockets) incorporated during moulding solely for purposes of
assembly, other than insulators of heading 85.46; electrical
conduit tubing and joints therefor, of base metal lined with
insulating material.
heading 48 - Electrical parts of machinery or apparatus, not specified or
included elsewhere in this Chapter.
heading 49 - Electrical and electronic waste and scrap . | {"heading_id": "32"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: cheroots with tobacco
These are the possible headings: heading 01 - Unmanufactured tob acco; tobacco refuse .
heading 02 - Cigars, cheroots, cigarillos and ci garettes, of tobacco or of
tobacco substitutes .
heading 03 - Other manufactured tobacco and manufactured tobacco
substitutes; “homoge nised” or “reconstituted” tobacco; tobacco
extracts and essence s.
heading 04 - Products containing tobacco, reconstituted tobacco, nicoti ne, or
toba cco or nicotine substitutes, intended for inhalation without
combustion; ot her nicotine containing products intended for the
intake of nic otine into the human body. | {"heading_id": "02"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: anchor fish
These are the possible headings: heading 01 - Sausages and similar products, of meat, meat offal, blood or
insects; food preparations based on these products.
heading 02 - Other prepar ed or preserved meat, meat offal, blood or insects.
heading 03 - Extracts and juices of meat, fish or crustaceans, molluscs or
other aquatic invertebrates.
heading 04 - Prepared or preserved fish; caviar and caviar substitutes
prepared from fish eggs .
heading 05 - Crustaceans, molluscs and other aquatic invertebrates, prepared
or preserved . | {"heading_id": "04"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: mango peeling machn
These are the possible headings: heading 01 - Nuclear reactors; fuel elements (cartridges), non-irradiated, for
nuclear reactors; machinery and apparatus for isotopic
separation.
heading 02 - Steam or other vapour generating boilers (other than central
heating hot water boilers capable also of producing low pressure
steam); super-heated water boilers.
heading 03 - Central heating boilers other than those of heading 84.02.
heading 04 - Auxiliary plant for use with boilers of heading 84.02 or 84.03 (for
example, economisers, super-heaters, soot removers, gas
recoverers); condensers for steam or other vapour power units.
heading 05 - Producer gas or water gas generators, with or without their
purifiers; acetylene gas generators and similar water process gas
generators, with or without their purifiers.
heading 06 - Steam turbines and other vapour turbines.
heading 07 - Spark-ignition reciprocating or rotary internal combustion
piston engines.
heading 08 - Compression-ignition internal combustion piston engines (diesel
or semi-diesel engines).
heading 09 - Parts suitable for use solely or principally with the engines of
heading 84.07 or 84.08.
heading 10 - Hydraulic turbines, water wheels, and regulators therefor.
heading 11 - Turbo -jets, turbo -propellers and other gas turbines.
heading 12 - Othe r engines and motors.
heading 13 - Pumps for liquids, whether or not fitted with a measuring device;
liquid elevators.
heading 14 - Air or vacuum pumps, air or other gas compressors and fans;
ventilating or recycling hoods incorporating a fan, whether or not
fitted with filters; gas-tight biological safety cabinets, whether
or not fitted with filters.
heading 15 - Air conditioning machines, comprising a motor-driven fan and
elements for changing the temperature and humidity, including
those machines in which the humidity cannot be separately
regulated.
heading 16 - Furnace burners for liquid fuel, for pulverised solid fuel or for
gas; mechanical stokers, including their mechanical grates,
mechanical ash dischargers and similar appliances.
heading 17 - Industrial or laboratory furnaces and ovens, including
incinerators, non-electric.
heading 18 - Refrigerators, freezers and other refrigerating or freezing
equipment, electric or other; heat pumps other than air
conditioning machines of heading 84.15.
heading 19 - Machinery, plant or laboratory equipment, whether or not
electrically heated (excluding furnaces, ovens and other
equipment of heading 85.14), for the treatment of materials by a
process involving a change of temperature such as heating,
cooking, roasting, distilling, rectifying, sterilising, pasteurising,
steaming, drying, evaporating, vaporising, condensing or cooling,
other than machinery or plant of a kind used for domestic
purposes; instantaneous or storage water heaters, non-electric.
heading 20 - Calendering or other rolling machines, other than for metals or
glass, and cylinders therefor.
heading 21 - Centrifuges, including centrifugal dryers; filtering or purifying
machinery and apparatus, for liquids or gases.
heading 22 - Dish washing machines; machinery for cleaning or drying bottles
or other containers; machinery for filling, closing, sealing or
labelling bottles, cans, boxes, bags or other containers; machinery
for capsuling bottles, jars, tubes and similar containers; other
packing or wrapping machinery (including heat-shrink wrapping
machinery); machinery for aerating beverages.
heading 23 - Weighing machinery (excluding balances of a sensitivity of 5 cg
or better), including weight operated counting or checking
machines; weighing machine weights of all kinds.
heading 24 - Mechanical appliances (whether or not hand-operated) for
projecting, dispersing or spraying liquids or powders; fire
extinguishers, whether or not charged; spray guns and similar
appliances; steam or sand blasting machines and similar jet
projecting machines.
heading 25 - Pulley tackle and hoists other than skip hoists; winches and
capstans; jacks.
heading 26 - Ships' derricks; cranes, including cable cranes; mobile lifting
frames, straddle carriers and works trucks fitted with a crane.
heading 27 - Fork-lift trucks; other works trucks fitted with lifting or handling
equipment.
heading 28 - Other lifting, handling, loading or unloading machinery (for
example, lifts, escalators, conveyors, teleferics).
heading 29 - Self-propelled bulldozers, angledozers, graders, levellers,
scrapers, mechanical shovels, excavators, shovel loaders, tamping
machines and road rollers.
heading 30 - Other moving, grading, levelling, scraping, excavating, tamping,
compacting, extracting or boring machinery, for earth, minerals
or ores; pile-drivers and pile-extractors; snow-ploughs and snow-
blowers.
heading 31 - Parts suitable for use solely or principally with the machinery of
headings 84.25 to 84.30.
heading 32 - Agricultural, horticultural or forestry machinery for soil
preparation or cultivation; lawn or sports-ground rollers.
heading 33 - Harvesting or threshing machinery, including straw or fodder
balers; grass or hay mowers; machines for cleaning, sorting or
grading eggs, fruit or other agricultural produce, other than
machinery of heading 84.37.
heading 34 - Milking machines and dairy ma chinery.
heading 35 - Presses, crushers and similar machinery used in the manufacture
of wine, cider, fruit juices or similar beverages.
heading 36 - Other agricultural, horticultural, forestry, poultry-keeping or
bee-keeping machinery, including germination plant fitted with
mechanical or thermal equipment; poultry incubators and
brooders.
heading 37 - Machines for cleaning, sorting or grading seed, grain or dried
leguminous vegetables; machinery used in the milling industry or
for the working of cereals or dried leguminous vegetables, other
than farm-type machinery.
heading 38 - Machinery, not specified or included elsewhere in this Chapter,
for the industrial preparation or manufacture of food or drink,
other than machinery for the extraction or preparation of
animal or fixed vegetable or microbial fats or oils.
heading 39 - Machinery for making pulp of fibrous cellulosic material or for
making or finishing paper or paperboard.
heading 40 - Book -binding machinery, including book -sewing machines.
heading 41 - Other machinery for making up paper pulp, paper or
paperboard, including cutting machines of all kinds.
heading 42 - Machinery, apparatus and equipment (other than the machines
of headings 84.56 to 84.65) for preparing or making plates,
cylinders or other printing components; plates, cylinders and
other printing components; plates, cylinders and lithographic
stones, prepared for printing purposes (for example, planed,
grained or polished).
heading 43 - Printing machinery used for printing by means of plates,
cylinders and other printing components of heading 84.42;
other printers, copying machines and facsimile machines,
whether or not combined; parts and accessories thereof.
heading 44 - Machines for extruding, drawing, texturing or cutting man-
made textile materials.
heading 45 - Machines for preparing textile fibres; spinning, doubling or
twisting machines and other machinery for producing textile
yarns; textile reeling or winding (including weft-winding)
machines and machines for preparing textile yarns for use on
the machines of heading 84.46 or 84.47.
heading 46 - Weaving machines (looms).
heading 47 - Knitting machines, stitch-bonding machines and machines for
making gimped yarn, tulle, lace, embroidery, trimmings, braid
or net and machines for tufting.
heading 48 - Auxiliary machinery for use with machines of heading 84.44,
84.45, 84.46 or 84.47 (for example, dobbies, Jacquards,
automatic stop motions, shuttle changing mechanisms); parts
and accessories suitable for use solely or principally with the
machines of this heading or of heading 84.44, 84.45, 84.46 or
84.47 (for example, spindles and spindle flyers, card clothing,
combs, extruding nipples, shuttles, healds and heald-frames,
hosiery needles).
heading 49 - Machinery for the manufacture or finishing of felt or
nonwovens in the piece or in shapes, including machinery for
making felt hats; blocks for making hats.
heading 50 - Household or laundry-type washing machines, including
machines which both wash and dry.
heading 51 - Machinery (other than machines of heading 84.50) for washing,
cleaning, wringing, drying, ironing, pressing (including fusing
presses), bleaching, dyeing, dressing, finishing, coating or
impregnating textile yarns, fabrics or made up textile articles
and machines for applying the paste to the base fabric or other
support used in the manufacture of floor coverings such as
linoleum; machines for reeling, unreeling, folding, cutting or
pinking textile fabrics.
heading 52 - Sewing machines, other than book-sewing machines of
heading 84.40; furniture, bases and covers specially designed
for sewing machines; sewing machine needles.
heading 53 - Machinery for preparing, tanning or working hides, skins or
leather or for making or repairing footwear or other articles of
hides, skins or leather, other than sewing machines.
heading 54 - Converters, ladles, ingot moulds and casting machines, of a kind
used in metallurgy or in metal foundries.
heading 55 - Metal -rolling mills and rolls therefor.
heading 56 - Machine-tools for working any material by removal of material,
by laser or other light or photon beam, ultrasonic, electro-
discharge, electro-chemical, electron beam, ionic-beam or
plasma arc processes; water-jet cutting machines.
heading 57 - Machining centres, unit construction machines (single station)
and multi-station transfer machines, for working metal.
heading 58 - Lathes (including turning centres) for removing metal.
heading 59 - Machine-tools (including way-type unit head machines) for
drilling, boring, milling, threading or tapping by removing
metal, other than lathes (including turning centres) of
heading 84.58.
heading 60 - Machine-tools for deburring, sharpening, grinding, honing,
lapping, polishing or otherwise finishing metal or cermets by
means of grinding stones, abrasives or polishing products, other
than gear cutting, gear grinding or gear finishing machines of
heading 84.61.
heading 61 - Machine-tools for planing, shaping, slotting, broaching, gear
cutting, gear grinding or gear finishing, sawing, cutting-off and
other machine-tools working by removing metal or cermets, not
elsewhere specified or included.
heading 62 - Machine-tools (including presses) for working metal by forging,
hammering or die forging (excluding rolling mills);
machine-tools (including presses, slitting lines and cut-to-length
lines) for working metal by bending, folding, straightening,
flattening, shearing, punching, notching or nibbling (excluding
draw-benches); presses for working metal or metal carbides,
not specified above.
heading 63 - Other machine-tools for working metal or cermets, without
removing material.
heading 64 - Machine-tools for working stone, ceramics, concrete, asbestos-
cement or like mineral materials or for cold working glass
heading 65 - Machine-tools (including machines for nailing, stapling, glueing
or otherwise assembling) for working wood, cork, bone, hard
rubber, hard plastics or similar hard materials.
heading 66 - Parts and accessories suitable for use solely or principally with
the machines of headings 84.56 to 84.65, including work or tool
holders, self-opening dieheads, dividing heads and other special
attachments for the machines; tool holders for any type of tool
for working in the hand.
heading 67 - Tools for working in the hand, pneumatic, hydraulic or with
self-contained electric or non-electric motor.
heading 68 - Machinery and apparatus for soldering, brazing or welding,
whether or not capable of cutting, other than those of
heading 85.15; gas-operated surface tempering machines and
appliances.
heading 70 - Calculating machines and pocket-size data recording,
reproducing and displaying machines with calculating
functions; accounting machines, postage-franking machines,
ticket-issuing machines and similar machines, incorporating a
calculating device; cash registers.
heading 71 - Automatic data processing machines and units thereof;
magnetic or optical readers, machines for transcribing data
onto data media in coded form and machines for processing
such data, not elsewhere specified or included.
heading 72 - Other office machines (for example, hectograph or stencil
duplicating machines, addressing machines, automatic
banknote dispensers, coin-sorting machines, coin-counting or
wrapping machines, pencil-sharpening machines, perforating or
stapling machines).
heading 73 - Parts and accessories (other than covers, carrying cases and the
like) suitable for use solely or principally with machines of
headings 84.70 to 84.72.
heading 74 - Machinery for sorting, screening, separating, washing,
crushing, grinding, mixing or kneading earth, stone, ores or
other mineral substances, in solid (including powder or paste)
form; machinery for agglomerating, shaping or moulding solid
mineral fuels, ceramic paste, unhardened cements, plastering
materials or other mineral products in powder or paste form;
machines for forming foundry moulds of sand.
heading 75 - Machines for assembling electric or electronic lamps, tubes or
valves or flashbulbs, in glass envelopes; machines for
manufacturing or hot working glass or glassware.
heading 76 - Automatic goods-vending machines (for example, postage
stamp, cigarette, food or beverage machines), including money-
changing machines.
heading 77 - Machinery for working rubber or plastics or for the
manufacture of products from these materials, not specified or
included elsewhere in this Chapter.
heading 78 - Machinery for preparing or making up tobacco, not specified or
included elsewhere in this Chapter.
heading 79 - Machines and mechanical appliances having individual
functions, not specified or included elsewhere in this Chapter.
heading 80 - Moulding boxes for metal foundry; mould bases; moulding
patterns; moulds for metal (other than ingot moulds), metal
carbides, glass, mineral materials, rubber or plastics.
heading 81 - Taps, cocks, valves and similar appliances for pipes, boiler
shells, tanks, vats or the like, including pressure-reducing valves
and thermostatically controlled valves.
heading 82 - Ball or roller bearings.
heading 83 - Transmission shafts (including cam shafts and crank shafts)
and cranks; bearing housings and plain shaft bearings; gears
and gearing; ball or roller screws; gear boxes and other speed
changers, including torque converters; flywheels and pulleys,
including pulley blocks; clutches and shaft couplings (including
universal joints).
heading 84 - Gaskets and similar joints of metal sheeting combined with
other material or of two or more layers of metal; sets or
assortments of gaskets and similar joints, dissimilar in
composition, put up in pouches, envelopes or similar packings;
mechanical seals.
heading 85 - Mac hines for additive manufacturing.
heading 86 - Machines and apparatus of a kind used solely or principally for
the manufacture of semiconductor boules or wafers,
semiconductor devices, electronic integrated circuits or flat
panel displays; machines and apparatus specified in Note 11 (C)
to this Chapter; parts and accessories.
heading 87 - Machinery parts, not containing electrical connectors,
insulators, coils, contacts or other electrical features, not
specified or included elsewhere in this Chapter. | {"heading_id": "38"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: bicycle intertube
These are the possible headings: heading 01 - Natural rubber, balata, gutta-percha, guayule, chicle and similar
natural gums, in primary forms or in plates, sheets or strip.
heading 02 - Synthetic rubber and factice derived from oils, in primary forms
or in plates, sheets or strip; mixtures of any product of
heading 40.01 with any product of this heading, in primary forms
or in plates, sheets or strip.
heading 03 - Reclaimed rubber in primary forms or in plates, sheets or strip.
heading 04 - Waste, parings and scrap of rubber (other than hard rubber)
and powders and granules obtained therefrom.
heading 05 - Compounded rubber, unvulcanised, in primary forms or in
plates, sheets or strip.
heading 06 - Other forms (for example, rods, tubes and profile shapes) and
articles (for example, discs and rings), of unvulcanised rubber.
heading 07 - Vulcanised rubber thread and cord.
heading 08 - Plates, sheets, strip, rods and profile shapes, of vulcanised rubber
other than hard rubber.
heading 09 - Tubes, pipes and hoses, of vulcanised rubber other than hard
rubber, with or without their fittings (for example, joints, elbows,
flanges).
heading 10 - Conveyor or transmission belts or belting, of vulcanised rub ber.
heading 11 - New pneumatic tyres, of rubber.
heading 12 - Retreaded or used pneumatic tyres of rubber; solid or cushion
tyres, tyre treads and tyre flaps, of rubber.
heading 13 - Inner tubes, of rubber.
heading 14 - Hygienic or pharmaceutical articles (including teats), of
vulcanised rubber other than hard rubber, with or without
fittings of hard rubber.
heading 15 - Articles of apparel and clothing accessories (including gloves,
mittens and mitts), for all purposes, of vulcanised rubber other
than hard rubber.
heading 16 - Other articles of vulcanised rubber other than hard rubber.
heading 17 - Hard rubber (for example, ebonite) in all forms, including waste
and scrap; articles of hard rubber. | {"heading_id": "13"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: laminated fabric rolls
These are the possible headings: heading 01 - Textile fabrics coated with gum or amylaceous substances, of a
kind used for the outer covers of books or the like; tracing cloth;
prepared painting canvas; buckram and similar stiffened textile
fabrics of a kind used for hat foundations.
heading 02 - Tyre cord fabric of high tenacity yarn of nylon or other
polyamides, polyesters or viscose rayon.
heading 03 - Textile fabrics impregnated, coated, covered or laminated with
plastics, other than those of heading 59.02.
heading 04 - Linoleum, whether or not cut to shape; floor coverings consisting
of a coating or covering applied on a textile backing, whether or
not cut to shape.
heading 05 - Textile wall coverings.
heading 06 - Rubberised textile fabrics, other than those of heading 59.02.
heading 07 - Textile fabrics otherwise impregnated, coated or covered;
painted canvas being theatrical scenery, studio back-cloths or the
like.
heading 08 - Textile wicks, woven, plaited or knitted , for lamps, stoves,
lighters, candles or the like; incandescent gas mantles and
tubular knitted gas mantle fabric therefor, whether or not
impregnated.
heading 09 - Textile hosepiping and similar textile tubing, with or without
lining, armour or accessories of other materials.
heading 10 - Transmission or conveyor belts or belting, of textile material,
whether or not impregnated, coated, covered or laminated with
plastics, or reinforced with metal or other material.
heading 11 - Textile products and articles, for technical uses, specified in
Note 8 to this Chapter. | {"heading_id": "03"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: fodder remains
These are the possible headings: heading 01 - Flours, meals and pellets, of meat or meat offal, of fis h or of
crustaceans, molluscs or other aquatic invertebrates, unfit f or
human consumption; greaves .
heading 02 - Bran, sharps and other residues, whe ther or not in the form of
pellets, derived from the sifting, milling or other w orking of
cereals or of leguminous plants .
heading 03 - Residues o f starch manufacture and similar residues, beet -pulp,
bagasse and other waste of sugar manufacture, brewing or
distilling dregs and waste, whether or not in the form of pellets .
heading 04 - Oil-cake and other solid residues, whether or not ground or in
the form of pellets, resulting from the extraction of soyabean oil.
heading 05 - Oil-cake and other solid residues, whether or not ground or in
the form of pellets, resulting from the extraction of ground-nut
oil
heading 06 - Oil-cake and ot her solid residues, whether or not ground or in
the form of pellets, resulting from the extraction of vegetable or
microbial fats or oils, o ther than those of heading 23.04
or 23.05.
heading 07 - Wine lees; argol.
heading 08 - Vegetable materials and vegetable waste, vegetable residues and
by-products, whether or not in the form of pellets, of a kind used
in animal feeding, not elsewhere specified or included.
heading 09 - Preparations of a kind used in animal feeding . | {"heading_id": "08"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: chemical testing product
These are the possible headings: heading 01 - Artificial graphite; colloidal or semi-colloidal graphite;
preparations based on graphite or other carbon in the form of
pastes, blocks, plates or other semi-manufactures.
heading 02 - Activated carbon; activated natural mineral products; animal
black, including spent animal black.
heading 03 - Tall oil, whether or not refined.
heading 04 - Residual lyes from the manufacture of wood pulp, whether or not
concentrated, desugared or chemically treated, including lignin
sulphonates, but excluding tall oil of heading 38.03.
heading 05 - Gum, wood or sulphate turpentine and other terpenic oils
produced by the distillation or other treatment of coniferous
woods; crude dipentene; sulphite turpentine and other crude
para-cymene; pine oil containing alpha-terpineol as the main
constituent.
heading 06 - Rosin and resin acids, and derivatives thereof; rosin spirit and
rosin oils; run gums.
heading 07 - Wood tar; wood tar oils; wood creosote; wood naphtha;
vegetable pitch; brewers' pitch and similar preparations based
on rosin, resin acids or on vegetable pitch.
heading 08 - Insecticides, rodenticides, fungicides, herbicides, anti-sprouting
products and plant-growth regulators, disinfectants and similar
products, put up in forms or packings for retail sale or as
preparations or articles (for example, sulphur-treated bands,
wicks and candles, and fly-papers).
heading 09 - Finishing agents, dye carriers to accelerate the dyeing or fixing of
dyestuffs and other products and preparations (for example,
dressings and mordants), of a kind used in the textile, paper,
leather or like industries, not elsewhere specified or included.
heading 10 - Pickling preparations for metal surfaces; fluxes and other
auxiliary preparations for soldering, brazing or welding;
soldering, brazing or welding powders and pastes consisting of
metal and other materials; preparations of a kind used as cores
or coatings for welding electrodes or rods.
heading 11 - Anti-knock preparations, oxidation inhibitors, gum inhibitors,
viscosity improvers, anti-corrosive preparations and other
prepared additives, for mineral oils (including gasoline) or for
other liquids used for the same purposes as mineral oils.
heading 12 - Prepared rubber accelerators; compound plasticisers for rubber
or plastics, not elsewhere specified or included; anti-oxidising
preparations and other compound stabilisers for rubber or
plastics.
heading 13 - Preparations and charges for fire-extinguishers; charged fire-
extinguishing grenades.
heading 14 - Organic composite solvents and thinners, not elsewhere specified
or included; prepared paint or varnish removers.
heading 15 - Reaction initiators, reaction accelerators and catalytic
preparations, not elsewhere specified or included.
heading 16 - Refractory cements, mortars, concretes and similar
compositions, including dolomite ramming mix, other than
products of heading 38.01.
heading 17 - Mixed alkylbenzenes and mixed alkylnaphthalenes, other than
those of heading 27.07 or 29.02.
heading 18 - Chemical elements doped for use in electronics, in the form of
discs, wafers or similar forms; chemical compounds doped for
use in electronics.
heading 19 - Hydraulic brake fluids and other prepared liquids for hydraulic
transmission, not containing or containing less than 70 % by
weight of petroleum oils or oils obtained from bituminous
minerals.
heading 20 - Anti-freezing preparations and prepared de-icing fluids.
heading 21 - Prepared culture media for the development or maintenance of
micro-organisms (including viruses and the like) or of plant,
human or animal cells.
heading 22 - Diagnostic or laboratory reagents on a backing, prepared
diagnostic or laboratory reagents whether or not on a backing,
whether or not put up in the form of kits, other than those of
heading 30.06; certified reference materials.
heading 23 - Industrial monocarboxylic fatty acids; acid oils from refining;
industrial fatty alcohols.
heading 24 - Prepared binders for foundry moulds or cores; chemical
products and preparations of the chemical or allied industries
(including those consisting of mixtures of natural products), not
elsewhere specified or included.
heading 25 - Residual products of the chemical or allied industries, not
elsewhere specified or included; municipal waste; sewage
sludge; other wastes specified in Note 6 to this Chapter.
heading 26 - Biodiesel and mixtures thereof, not containing or containing less
than 70 % by weight of petroleum oils or oils obtained from
bituminous minerals.
heading 27 - Mixtures containing halogenated derivatives of methane, ethane
or propane, not elsewhere specified or included. | {"heading_id": "22"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: computer controlled mill
These are the possible headings: heading 01 - Nuclear reactors; fuel elements (cartridges), non-irradiated, for
nuclear reactors; machinery and apparatus for isotopic
separation.
heading 02 - Steam or other vapour generating boilers (other than central
heating hot water boilers capable also of producing low pressure
steam); super-heated water boilers.
heading 03 - Central heating boilers other than those of heading 84.02.
heading 04 - Auxiliary plant for use with boilers of heading 84.02 or 84.03 (for
example, economisers, super-heaters, soot removers, gas
recoverers); condensers for steam or other vapour power units.
heading 05 - Producer gas or water gas generators, with or without their
purifiers; acetylene gas generators and similar water process gas
generators, with or without their purifiers.
heading 06 - Steam turbines and other vapour turbines.
heading 07 - Spark-ignition reciprocating or rotary internal combustion
piston engines.
heading 08 - Compression-ignition internal combustion piston engines (diesel
or semi-diesel engines).
heading 09 - Parts suitable for use solely or principally with the engines of
heading 84.07 or 84.08.
heading 10 - Hydraulic turbines, water wheels, and regulators therefor.
heading 11 - Turbo -jets, turbo -propellers and other gas turbines.
heading 12 - Othe r engines and motors.
heading 13 - Pumps for liquids, whether or not fitted with a measuring device;
liquid elevators.
heading 14 - Air or vacuum pumps, air or other gas compressors and fans;
ventilating or recycling hoods incorporating a fan, whether or not
fitted with filters; gas-tight biological safety cabinets, whether
or not fitted with filters.
heading 15 - Air conditioning machines, comprising a motor-driven fan and
elements for changing the temperature and humidity, including
those machines in which the humidity cannot be separately
regulated.
heading 16 - Furnace burners for liquid fuel, for pulverised solid fuel or for
gas; mechanical stokers, including their mechanical grates,
mechanical ash dischargers and similar appliances.
heading 17 - Industrial or laboratory furnaces and ovens, including
incinerators, non-electric.
heading 18 - Refrigerators, freezers and other refrigerating or freezing
equipment, electric or other; heat pumps other than air
conditioning machines of heading 84.15.
heading 19 - Machinery, plant or laboratory equipment, whether or not
electrically heated (excluding furnaces, ovens and other
equipment of heading 85.14), for the treatment of materials by a
process involving a change of temperature such as heating,
cooking, roasting, distilling, rectifying, sterilising, pasteurising,
steaming, drying, evaporating, vaporising, condensing or cooling,
other than machinery or plant of a kind used for domestic
purposes; instantaneous or storage water heaters, non-electric.
heading 20 - Calendering or other rolling machines, other than for metals or
glass, and cylinders therefor.
heading 21 - Centrifuges, including centrifugal dryers; filtering or purifying
machinery and apparatus, for liquids or gases.
heading 22 - Dish washing machines; machinery for cleaning or drying bottles
or other containers; machinery for filling, closing, sealing or
labelling bottles, cans, boxes, bags or other containers; machinery
for capsuling bottles, jars, tubes and similar containers; other
packing or wrapping machinery (including heat-shrink wrapping
machinery); machinery for aerating beverages.
heading 23 - Weighing machinery (excluding balances of a sensitivity of 5 cg
or better), including weight operated counting or checking
machines; weighing machine weights of all kinds.
heading 24 - Mechanical appliances (whether or not hand-operated) for
projecting, dispersing or spraying liquids or powders; fire
extinguishers, whether or not charged; spray guns and similar
appliances; steam or sand blasting machines and similar jet
projecting machines.
heading 25 - Pulley tackle and hoists other than skip hoists; winches and
capstans; jacks.
heading 26 - Ships' derricks; cranes, including cable cranes; mobile lifting
frames, straddle carriers and works trucks fitted with a crane.
heading 27 - Fork-lift trucks; other works trucks fitted with lifting or handling
equipment.
heading 28 - Other lifting, handling, loading or unloading machinery (for
example, lifts, escalators, conveyors, teleferics).
heading 29 - Self-propelled bulldozers, angledozers, graders, levellers,
scrapers, mechanical shovels, excavators, shovel loaders, tamping
machines and road rollers.
heading 30 - Other moving, grading, levelling, scraping, excavating, tamping,
compacting, extracting or boring machinery, for earth, minerals
or ores; pile-drivers and pile-extractors; snow-ploughs and snow-
blowers.
heading 31 - Parts suitable for use solely or principally with the machinery of
headings 84.25 to 84.30.
heading 32 - Agricultural, horticultural or forestry machinery for soil
preparation or cultivation; lawn or sports-ground rollers.
heading 33 - Harvesting or threshing machinery, including straw or fodder
balers; grass or hay mowers; machines for cleaning, sorting or
grading eggs, fruit or other agricultural produce, other than
machinery of heading 84.37.
heading 34 - Milking machines and dairy ma chinery.
heading 35 - Presses, crushers and similar machinery used in the manufacture
of wine, cider, fruit juices or similar beverages.
heading 36 - Other agricultural, horticultural, forestry, poultry-keeping or
bee-keeping machinery, including germination plant fitted with
mechanical or thermal equipment; poultry incubators and
brooders.
heading 37 - Machines for cleaning, sorting or grading seed, grain or dried
leguminous vegetables; machinery used in the milling industry or
for the working of cereals or dried leguminous vegetables, other
than farm-type machinery.
heading 38 - Machinery, not specified or included elsewhere in this Chapter,
for the industrial preparation or manufacture of food or drink,
other than machinery for the extraction or preparation of
animal or fixed vegetable or microbial fats or oils.
heading 39 - Machinery for making pulp of fibrous cellulosic material or for
making or finishing paper or paperboard.
heading 40 - Book -binding machinery, including book -sewing machines.
heading 41 - Other machinery for making up paper pulp, paper or
paperboard, including cutting machines of all kinds.
heading 42 - Machinery, apparatus and equipment (other than the machines
of headings 84.56 to 84.65) for preparing or making plates,
cylinders or other printing components; plates, cylinders and
other printing components; plates, cylinders and lithographic
stones, prepared for printing purposes (for example, planed,
grained or polished).
heading 43 - Printing machinery used for printing by means of plates,
cylinders and other printing components of heading 84.42;
other printers, copying machines and facsimile machines,
whether or not combined; parts and accessories thereof.
heading 44 - Machines for extruding, drawing, texturing or cutting man-
made textile materials.
heading 45 - Machines for preparing textile fibres; spinning, doubling or
twisting machines and other machinery for producing textile
yarns; textile reeling or winding (including weft-winding)
machines and machines for preparing textile yarns for use on
the machines of heading 84.46 or 84.47.
heading 46 - Weaving machines (looms).
heading 47 - Knitting machines, stitch-bonding machines and machines for
making gimped yarn, tulle, lace, embroidery, trimmings, braid
or net and machines for tufting.
heading 48 - Auxiliary machinery for use with machines of heading 84.44,
84.45, 84.46 or 84.47 (for example, dobbies, Jacquards,
automatic stop motions, shuttle changing mechanisms); parts
and accessories suitable for use solely or principally with the
machines of this heading or of heading 84.44, 84.45, 84.46 or
84.47 (for example, spindles and spindle flyers, card clothing,
combs, extruding nipples, shuttles, healds and heald-frames,
hosiery needles).
heading 49 - Machinery for the manufacture or finishing of felt or
nonwovens in the piece or in shapes, including machinery for
making felt hats; blocks for making hats.
heading 50 - Household or laundry-type washing machines, including
machines which both wash and dry.
heading 51 - Machinery (other than machines of heading 84.50) for washing,
cleaning, wringing, drying, ironing, pressing (including fusing
presses), bleaching, dyeing, dressing, finishing, coating or
impregnating textile yarns, fabrics or made up textile articles
and machines for applying the paste to the base fabric or other
support used in the manufacture of floor coverings such as
linoleum; machines for reeling, unreeling, folding, cutting or
pinking textile fabrics.
heading 52 - Sewing machines, other than book-sewing machines of
heading 84.40; furniture, bases and covers specially designed
for sewing machines; sewing machine needles.
heading 53 - Machinery for preparing, tanning or working hides, skins or
leather or for making or repairing footwear or other articles of
hides, skins or leather, other than sewing machines.
heading 54 - Converters, ladles, ingot moulds and casting machines, of a kind
used in metallurgy or in metal foundries.
heading 55 - Metal -rolling mills and rolls therefor.
heading 56 - Machine-tools for working any material by removal of material,
by laser or other light or photon beam, ultrasonic, electro-
discharge, electro-chemical, electron beam, ionic-beam or
plasma arc processes; water-jet cutting machines.
heading 57 - Machining centres, unit construction machines (single station)
and multi-station transfer machines, for working metal.
heading 58 - Lathes (including turning centres) for removing metal.
heading 59 - Machine-tools (including way-type unit head machines) for
drilling, boring, milling, threading or tapping by removing
metal, other than lathes (including turning centres) of
heading 84.58.
heading 60 - Machine-tools for deburring, sharpening, grinding, honing,
lapping, polishing or otherwise finishing metal or cermets by
means of grinding stones, abrasives or polishing products, other
than gear cutting, gear grinding or gear finishing machines of
heading 84.61.
heading 61 - Machine-tools for planing, shaping, slotting, broaching, gear
cutting, gear grinding or gear finishing, sawing, cutting-off and
other machine-tools working by removing metal or cermets, not
elsewhere specified or included.
heading 62 - Machine-tools (including presses) for working metal by forging,
hammering or die forging (excluding rolling mills);
machine-tools (including presses, slitting lines and cut-to-length
lines) for working metal by bending, folding, straightening,
flattening, shearing, punching, notching or nibbling (excluding
draw-benches); presses for working metal or metal carbides,
not specified above.
heading 63 - Other machine-tools for working metal or cermets, without
removing material.
heading 64 - Machine-tools for working stone, ceramics, concrete, asbestos-
cement or like mineral materials or for cold working glass
heading 65 - Machine-tools (including machines for nailing, stapling, glueing
or otherwise assembling) for working wood, cork, bone, hard
rubber, hard plastics or similar hard materials.
heading 66 - Parts and accessories suitable for use solely or principally with
the machines of headings 84.56 to 84.65, including work or tool
holders, self-opening dieheads, dividing heads and other special
attachments for the machines; tool holders for any type of tool
for working in the hand.
heading 67 - Tools for working in the hand, pneumatic, hydraulic or with
self-contained electric or non-electric motor.
heading 68 - Machinery and apparatus for soldering, brazing or welding,
whether or not capable of cutting, other than those of
heading 85.15; gas-operated surface tempering machines and
appliances.
heading 70 - Calculating machines and pocket-size data recording,
reproducing and displaying machines with calculating
functions; accounting machines, postage-franking machines,
ticket-issuing machines and similar machines, incorporating a
calculating device; cash registers.
heading 71 - Automatic data processing machines and units thereof;
magnetic or optical readers, machines for transcribing data
onto data media in coded form and machines for processing
such data, not elsewhere specified or included.
heading 72 - Other office machines (for example, hectograph or stencil
duplicating machines, addressing machines, automatic
banknote dispensers, coin-sorting machines, coin-counting or
wrapping machines, pencil-sharpening machines, perforating or
stapling machines).
heading 73 - Parts and accessories (other than covers, carrying cases and the
like) suitable for use solely or principally with machines of
headings 84.70 to 84.72.
heading 74 - Machinery for sorting, screening, separating, washing,
crushing, grinding, mixing or kneading earth, stone, ores or
other mineral substances, in solid (including powder or paste)
form; machinery for agglomerating, shaping or moulding solid
mineral fuels, ceramic paste, unhardened cements, plastering
materials or other mineral products in powder or paste form;
machines for forming foundry moulds of sand.
heading 75 - Machines for assembling electric or electronic lamps, tubes or
valves or flashbulbs, in glass envelopes; machines for
manufacturing or hot working glass or glassware.
heading 76 - Automatic goods-vending machines (for example, postage
stamp, cigarette, food or beverage machines), including money-
changing machines.
heading 77 - Machinery for working rubber or plastics or for the
manufacture of products from these materials, not specified or
included elsewhere in this Chapter.
heading 78 - Machinery for preparing or making up tobacco, not specified or
included elsewhere in this Chapter.
heading 79 - Machines and mechanical appliances having individual
functions, not specified or included elsewhere in this Chapter.
heading 80 - Moulding boxes for metal foundry; mould bases; moulding
patterns; moulds for metal (other than ingot moulds), metal
carbides, glass, mineral materials, rubber or plastics.
heading 81 - Taps, cocks, valves and similar appliances for pipes, boiler
shells, tanks, vats or the like, including pressure-reducing valves
and thermostatically controlled valves.
heading 82 - Ball or roller bearings.
heading 83 - Transmission shafts (including cam shafts and crank shafts)
and cranks; bearing housings and plain shaft bearings; gears
and gearing; ball or roller screws; gear boxes and other speed
changers, including torque converters; flywheels and pulleys,
including pulley blocks; clutches and shaft couplings (including
universal joints).
heading 84 - Gaskets and similar joints of metal sheeting combined with
other material or of two or more layers of metal; sets or
assortments of gaskets and similar joints, dissimilar in
composition, put up in pouches, envelopes or similar packings;
mechanical seals.
heading 85 - Mac hines for additive manufacturing.
heading 86 - Machines and apparatus of a kind used solely or principally for
the manufacture of semiconductor boules or wafers,
semiconductor devices, electronic integrated circuits or flat
panel displays; machines and apparatus specified in Note 11 (C)
to this Chapter; parts and accessories.
heading 87 - Machinery parts, not containing electrical connectors,
insulators, coils, contacts or other electrical features, not
specified or included elsewhere in this Chapter. | {"heading_id": "59"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: cobalt wire supplier
These are the possible headings: heading 01 - Tungsten (wolfram) and articles thereof, including waste and
scrap.
heading 02 - Molybdenum and articles thereof, including waste and scrap.
heading 03 - Tantalum and articles thereof, including waste and scrap.
heading 04 - Magnesium and articles thereof, including waste a nd scrap.
heading 05 - Cobalt mattes and other intermediate products of cobalt
metallurgy; cobalt and articles thereof, including waste and
scrap.
heading 06 - Bismuth and articles thereof, including waste and scrap.
heading 08 - Titanium and articles thereof, including waste and scrap.
heading 09 - Zirconium and articles thereof, including waste and scrap.
heading 10 - Antimony and articles thereof, including waste and scrap.
heading 11 - Manganese and articles thereof, including waste and scrap.
heading 12 - Beryllium, chromium, hafnium, rhenium, thallium, cadmium,
germanium, vanadium, gallium, indium and niobium
(columbium), and articles of these metals, including waste and
scrap. | {"heading_id": "05"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: ginger spice pack
These are the possible headings: heading 01 - Coffee, whether or not roasted or decaffeinated; coffee husks and
heading 02 - Tea, whether or not fla voured .
heading 03 - Maté.
heading 04 - Pepper of the genus Piper ; dried or crushed or ground fruits of
heading 05 - Vanilla .
heading 06 - Cinnamon and cinnamon -tree flowers .
heading 07 - Cloves (whole fruit, cl oves and stems) .
heading 08 - Nutmeg, mace and cardamoms .
heading 09 - Seeds of anise, badian, fennel, coriander, cumin or caraway;
heading 10 - Ginger, saffron, turmeric (curcuma), thyme, bay leaves, curry | {"heading_id": "10"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: loader components
These are the possible headings: heading 01 - Nuclear reactors; fuel elements (cartridges), non-irradiated, for
nuclear reactors; machinery and apparatus for isotopic
separation.
heading 02 - Steam or other vapour generating boilers (other than central
heating hot water boilers capable also of producing low pressure
steam); super-heated water boilers.
heading 03 - Central heating boilers other than those of heading 84.02.
heading 04 - Auxiliary plant for use with boilers of heading 84.02 or 84.03 (for
example, economisers, super-heaters, soot removers, gas
recoverers); condensers for steam or other vapour power units.
heading 05 - Producer gas or water gas generators, with or without their
purifiers; acetylene gas generators and similar water process gas
generators, with or without their purifiers.
heading 06 - Steam turbines and other vapour turbines.
heading 07 - Spark-ignition reciprocating or rotary internal combustion
piston engines.
heading 08 - Compression-ignition internal combustion piston engines (diesel
or semi-diesel engines).
heading 09 - Parts suitable for use solely or principally with the engines of
heading 84.07 or 84.08.
heading 10 - Hydraulic turbines, water wheels, and regulators therefor.
heading 11 - Turbo -jets, turbo -propellers and other gas turbines.
heading 12 - Othe r engines and motors.
heading 13 - Pumps for liquids, whether or not fitted with a measuring device;
liquid elevators.
heading 14 - Air or vacuum pumps, air or other gas compressors and fans;
ventilating or recycling hoods incorporating a fan, whether or not
fitted with filters; gas-tight biological safety cabinets, whether
or not fitted with filters.
heading 15 - Air conditioning machines, comprising a motor-driven fan and
elements for changing the temperature and humidity, including
those machines in which the humidity cannot be separately
regulated.
heading 16 - Furnace burners for liquid fuel, for pulverised solid fuel or for
gas; mechanical stokers, including their mechanical grates,
mechanical ash dischargers and similar appliances.
heading 17 - Industrial or laboratory furnaces and ovens, including
incinerators, non-electric.
heading 18 - Refrigerators, freezers and other refrigerating or freezing
equipment, electric or other; heat pumps other than air
conditioning machines of heading 84.15.
heading 19 - Machinery, plant or laboratory equipment, whether or not
electrically heated (excluding furnaces, ovens and other
equipment of heading 85.14), for the treatment of materials by a
process involving a change of temperature such as heating,
cooking, roasting, distilling, rectifying, sterilising, pasteurising,
steaming, drying, evaporating, vaporising, condensing or cooling,
other than machinery or plant of a kind used for domestic
purposes; instantaneous or storage water heaters, non-electric.
heading 20 - Calendering or other rolling machines, other than for metals or
glass, and cylinders therefor.
heading 21 - Centrifuges, including centrifugal dryers; filtering or purifying
machinery and apparatus, for liquids or gases.
heading 22 - Dish washing machines; machinery for cleaning or drying bottles
or other containers; machinery for filling, closing, sealing or
labelling bottles, cans, boxes, bags or other containers; machinery
for capsuling bottles, jars, tubes and similar containers; other
packing or wrapping machinery (including heat-shrink wrapping
machinery); machinery for aerating beverages.
heading 23 - Weighing machinery (excluding balances of a sensitivity of 5 cg
or better), including weight operated counting or checking
machines; weighing machine weights of all kinds.
heading 24 - Mechanical appliances (whether or not hand-operated) for
projecting, dispersing or spraying liquids or powders; fire
extinguishers, whether or not charged; spray guns and similar
appliances; steam or sand blasting machines and similar jet
projecting machines.
heading 25 - Pulley tackle and hoists other than skip hoists; winches and
capstans; jacks.
heading 26 - Ships' derricks; cranes, including cable cranes; mobile lifting
frames, straddle carriers and works trucks fitted with a crane.
heading 27 - Fork-lift trucks; other works trucks fitted with lifting or handling
equipment.
heading 28 - Other lifting, handling, loading or unloading machinery (for
example, lifts, escalators, conveyors, teleferics).
heading 29 - Self-propelled bulldozers, angledozers, graders, levellers,
scrapers, mechanical shovels, excavators, shovel loaders, tamping
machines and road rollers.
heading 30 - Other moving, grading, levelling, scraping, excavating, tamping,
compacting, extracting or boring machinery, for earth, minerals
or ores; pile-drivers and pile-extractors; snow-ploughs and snow-
blowers.
heading 31 - Parts suitable for use solely or principally with the machinery of
headings 84.25 to 84.30.
heading 32 - Agricultural, horticultural or forestry machinery for soil
preparation or cultivation; lawn or sports-ground rollers.
heading 33 - Harvesting or threshing machinery, including straw or fodder
balers; grass or hay mowers; machines for cleaning, sorting or
grading eggs, fruit or other agricultural produce, other than
machinery of heading 84.37.
heading 34 - Milking machines and dairy ma chinery.
heading 35 - Presses, crushers and similar machinery used in the manufacture
of wine, cider, fruit juices or similar beverages.
heading 36 - Other agricultural, horticultural, forestry, poultry-keeping or
bee-keeping machinery, including germination plant fitted with
mechanical or thermal equipment; poultry incubators and
brooders.
heading 37 - Machines for cleaning, sorting or grading seed, grain or dried
leguminous vegetables; machinery used in the milling industry or
for the working of cereals or dried leguminous vegetables, other
than farm-type machinery.
heading 38 - Machinery, not specified or included elsewhere in this Chapter,
for the industrial preparation or manufacture of food or drink,
other than machinery for the extraction or preparation of
animal or fixed vegetable or microbial fats or oils.
heading 39 - Machinery for making pulp of fibrous cellulosic material or for
making or finishing paper or paperboard.
heading 40 - Book -binding machinery, including book -sewing machines.
heading 41 - Other machinery for making up paper pulp, paper or
paperboard, including cutting machines of all kinds.
heading 42 - Machinery, apparatus and equipment (other than the machines
of headings 84.56 to 84.65) for preparing or making plates,
cylinders or other printing components; plates, cylinders and
other printing components; plates, cylinders and lithographic
stones, prepared for printing purposes (for example, planed,
grained or polished).
heading 43 - Printing machinery used for printing by means of plates,
cylinders and other printing components of heading 84.42;
other printers, copying machines and facsimile machines,
whether or not combined; parts and accessories thereof.
heading 44 - Machines for extruding, drawing, texturing or cutting man-
made textile materials.
heading 45 - Machines for preparing textile fibres; spinning, doubling or
twisting machines and other machinery for producing textile
yarns; textile reeling or winding (including weft-winding)
machines and machines for preparing textile yarns for use on
the machines of heading 84.46 or 84.47.
heading 46 - Weaving machines (looms).
heading 47 - Knitting machines, stitch-bonding machines and machines for
making gimped yarn, tulle, lace, embroidery, trimmings, braid
or net and machines for tufting.
heading 48 - Auxiliary machinery for use with machines of heading 84.44,
84.45, 84.46 or 84.47 (for example, dobbies, Jacquards,
automatic stop motions, shuttle changing mechanisms); parts
and accessories suitable for use solely or principally with the
machines of this heading or of heading 84.44, 84.45, 84.46 or
84.47 (for example, spindles and spindle flyers, card clothing,
combs, extruding nipples, shuttles, healds and heald-frames,
hosiery needles).
heading 49 - Machinery for the manufacture or finishing of felt or
nonwovens in the piece or in shapes, including machinery for
making felt hats; blocks for making hats.
heading 50 - Household or laundry-type washing machines, including
machines which both wash and dry.
heading 51 - Machinery (other than machines of heading 84.50) for washing,
cleaning, wringing, drying, ironing, pressing (including fusing
presses), bleaching, dyeing, dressing, finishing, coating or
impregnating textile yarns, fabrics or made up textile articles
and machines for applying the paste to the base fabric or other
support used in the manufacture of floor coverings such as
linoleum; machines for reeling, unreeling, folding, cutting or
pinking textile fabrics.
heading 52 - Sewing machines, other than book-sewing machines of
heading 84.40; furniture, bases and covers specially designed
for sewing machines; sewing machine needles.
heading 53 - Machinery for preparing, tanning or working hides, skins or
leather or for making or repairing footwear or other articles of
hides, skins or leather, other than sewing machines.
heading 54 - Converters, ladles, ingot moulds and casting machines, of a kind
used in metallurgy or in metal foundries.
heading 55 - Metal -rolling mills and rolls therefor.
heading 56 - Machine-tools for working any material by removal of material,
by laser or other light or photon beam, ultrasonic, electro-
discharge, electro-chemical, electron beam, ionic-beam or
plasma arc processes; water-jet cutting machines.
heading 57 - Machining centres, unit construction machines (single station)
and multi-station transfer machines, for working metal.
heading 58 - Lathes (including turning centres) for removing metal.
heading 59 - Machine-tools (including way-type unit head machines) for
drilling, boring, milling, threading or tapping by removing
metal, other than lathes (including turning centres) of
heading 84.58.
heading 60 - Machine-tools for deburring, sharpening, grinding, honing,
lapping, polishing or otherwise finishing metal or cermets by
means of grinding stones, abrasives or polishing products, other
than gear cutting, gear grinding or gear finishing machines of
heading 84.61.
heading 61 - Machine-tools for planing, shaping, slotting, broaching, gear
cutting, gear grinding or gear finishing, sawing, cutting-off and
other machine-tools working by removing metal or cermets, not
elsewhere specified or included.
heading 62 - Machine-tools (including presses) for working metal by forging,
hammering or die forging (excluding rolling mills);
machine-tools (including presses, slitting lines and cut-to-length
lines) for working metal by bending, folding, straightening,
flattening, shearing, punching, notching or nibbling (excluding
draw-benches); presses for working metal or metal carbides,
not specified above.
heading 63 - Other machine-tools for working metal or cermets, without
removing material.
heading 64 - Machine-tools for working stone, ceramics, concrete, asbestos-
cement or like mineral materials or for cold working glass
heading 65 - Machine-tools (including machines for nailing, stapling, glueing
or otherwise assembling) for working wood, cork, bone, hard
rubber, hard plastics or similar hard materials.
heading 66 - Parts and accessories suitable for use solely or principally with
the machines of headings 84.56 to 84.65, including work or tool
holders, self-opening dieheads, dividing heads and other special
attachments for the machines; tool holders for any type of tool
for working in the hand.
heading 67 - Tools for working in the hand, pneumatic, hydraulic or with
self-contained electric or non-electric motor.
heading 68 - Machinery and apparatus for soldering, brazing or welding,
whether or not capable of cutting, other than those of
heading 85.15; gas-operated surface tempering machines and
appliances.
heading 70 - Calculating machines and pocket-size data recording,
reproducing and displaying machines with calculating
functions; accounting machines, postage-franking machines,
ticket-issuing machines and similar machines, incorporating a
calculating device; cash registers.
heading 71 - Automatic data processing machines and units thereof;
magnetic or optical readers, machines for transcribing data
onto data media in coded form and machines for processing
such data, not elsewhere specified or included.
heading 72 - Other office machines (for example, hectograph or stencil
duplicating machines, addressing machines, automatic
banknote dispensers, coin-sorting machines, coin-counting or
wrapping machines, pencil-sharpening machines, perforating or
stapling machines).
heading 73 - Parts and accessories (other than covers, carrying cases and the
like) suitable for use solely or principally with machines of
headings 84.70 to 84.72.
heading 74 - Machinery for sorting, screening, separating, washing,
crushing, grinding, mixing or kneading earth, stone, ores or
other mineral substances, in solid (including powder or paste)
form; machinery for agglomerating, shaping or moulding solid
mineral fuels, ceramic paste, unhardened cements, plastering
materials or other mineral products in powder or paste form;
machines for forming foundry moulds of sand.
heading 75 - Machines for assembling electric or electronic lamps, tubes or
valves or flashbulbs, in glass envelopes; machines for
manufacturing or hot working glass or glassware.
heading 76 - Automatic goods-vending machines (for example, postage
stamp, cigarette, food or beverage machines), including money-
changing machines.
heading 77 - Machinery for working rubber or plastics or for the
manufacture of products from these materials, not specified or
included elsewhere in this Chapter.
heading 78 - Machinery for preparing or making up tobacco, not specified or
included elsewhere in this Chapter.
heading 79 - Machines and mechanical appliances having individual
functions, not specified or included elsewhere in this Chapter.
heading 80 - Moulding boxes for metal foundry; mould bases; moulding
patterns; moulds for metal (other than ingot moulds), metal
carbides, glass, mineral materials, rubber or plastics.
heading 81 - Taps, cocks, valves and similar appliances for pipes, boiler
shells, tanks, vats or the like, including pressure-reducing valves
and thermostatically controlled valves.
heading 82 - Ball or roller bearings.
heading 83 - Transmission shafts (including cam shafts and crank shafts)
and cranks; bearing housings and plain shaft bearings; gears
and gearing; ball or roller screws; gear boxes and other speed
changers, including torque converters; flywheels and pulleys,
including pulley blocks; clutches and shaft couplings (including
universal joints).
heading 84 - Gaskets and similar joints of metal sheeting combined with
other material or of two or more layers of metal; sets or
assortments of gaskets and similar joints, dissimilar in
composition, put up in pouches, envelopes or similar packings;
mechanical seals.
heading 85 - Mac hines for additive manufacturing.
heading 86 - Machines and apparatus of a kind used solely or principally for
the manufacture of semiconductor boules or wafers,
semiconductor devices, electronic integrated circuits or flat
panel displays; machines and apparatus specified in Note 11 (C)
to this Chapter; parts and accessories.
heading 87 - Machinery parts, not containing electrical connectors,
insulators, coils, contacts or other electrical features, not
specified or included elsewhere in this Chapter. | {"heading_id": "31"} |
Classify the product given in the product description under the correct HSN heading. You will be given a list of headings to choose from. Output a json with only 'heading_id' key containing the classified heading_id. The heading_id should be in string format. | Product Description: phenethyl compound
These are the possible headings: heading 01 - Acyclic hydrocarbons .
heading 02 - Cyclic hydrocarbons .
heading 03 - Halogenated derivatives of hydrocarbons .
heading 04 - Sulphonated, nitrated or nitrosated derivatives of hydrocarbons,
heading 05 - Acyclic alcohols and their halogenated, sulphonated, nitrated or
heading 06 - Cyclic alcohols and their halogenated, sulphonated, nitrated or
heading 07 - Phenols; phenol -alcohols .
heading 08 - Halogenated, sulphonated, nitrated or nitrosated derivatives of
heading 09 - Ethers, ether -alcohols, ether -phenols, ether -alcohol -phenols,
heading 10 - Epoxides, epoxyalcohols, epoxyphenols and epoxyethers, with a
heading 12 - Aldehydes, whether or not with other oxygen function; cyclic
heading 15 - Saturated acyclic monocarboxylic acids and their anhydrides,
heading 16 - Unsaturated acyclic monocarboxylic acids, cyclic monocarboxylic
heading 17 - Polycarboxylic acids, their anhydrides, halides, peroxides and
heading 18 - Carboxylic acids with additional oxygen function and their
heading 19 - Phosphoric esters and their salts, including lactophosphates;
heading 20 - Esters of other inorganic acids of non -metals (excluding esters
heading 21 - Amine -function compounds.
heading 22 - Oxygen -function amino -compounds.
heading 23 - Quaternary ammonium salts and hydroxides; lecithins and
heading 24 - Carboxyamide -function compounds; amide -function compounds
heading 25 - Carboxyimide -function compounds (including saccharin and its
heading 26 - Nitrile -function compounds.
heading 30 - Organo -sulphur compounds.
heading 31 - Other organo -inorganic compounds .
heading 32 - Heterocyclic compounds with oxygen hetero -atom(s) only.
heading 33 - Heterocyclic compounds with nitrogen hetero -atom(s) only.
heading 34 - Nucleic acids and their salts, whether or not chemically defined;
heading 35 - Sulphonamides.
heading 36 - Provitamins and vitamins, natural or reproduced by synthesis
heading 37 - Hormones, prostaglandins, thromboxanes and leukotrienes,
heading 38 - Glycosides, natural or reproduced by synthesis, and their salts,
heading 39 - Alkaloids, natural or reproduced by synthesis, and their salts, | {"heading_id": "33"} |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.