hash
stringlengths 32
32
| doc_id
stringlengths 7
13
| section
stringlengths 3
121
| content
stringlengths 0
3.82M
|
|---|---|---|---|
e59ea8dcad939b2b08179091ad5f515d
|
100 623
|
9.4.26 List of Required Attributes
|
Attribute Identifier 1 Length 2-3 Attribute Id 4 (cont.) (cont.) N Each Attribute Id is one octet.
|
e59ea8dcad939b2b08179091ad5f515d
|
100 623
|
9.4.27 MAIO
|
Attribute Identifier 1 MAIO 2 MAIO (see GSM 05.02) <0-3F>
|
e59ea8dcad939b2b08179091ad5f515d
|
100 623
|
9.4.28 Manufacturer Dependent State
|
Attribute Identifier 1 Manufacturer Dependent State 2 Manufacturer Dependent State <0-FF> This is optional to be used in addition to Operational State in accordance with GSM 12.20. ETSI 54 ETSI TS 100 623 V5.0.0 (2000-05) (GSM 12.21 version 5.0.0 Release 1996)
|
e59ea8dcad939b2b08179091ad5f515d
|
100 623
|
9.4.29 Manufacturer Dependent Thresholds
|
Attribute Identifier 1 Length 2-3 Manufacturer Dependent Thresholds 4 (cont.) (cont.) N The content of Manufacturer Dependent Thresholds is manufacturer dependent.
|
e59ea8dcad939b2b08179091ad5f515d
|
100 623
|
9.4.30 Manufacturer Id
|
Attribute Identifier 1 Length 2-3 Manufacturer Id 4 (cont.) (cont.) N The content of Manufacturer Id is manufacturer dependent.
|
e59ea8dcad939b2b08179091ad5f515d
|
100 623
|
9.4.31 Max Timing Advance
|
Attribute Identifier 1 Max Timing Advance 2 Max Timing Advance (see GSM 08.58) <0-7F>
|
e59ea8dcad939b2b08179091ad5f515d
|
100 623
|
9.4.32 Measurement Result
|
Attribute Identifier 1 Length of measurement result (N) 2-3 Result (MSB) 4 (cont.) Result (LSB) N+3
|
e59ea8dcad939b2b08179091ad5f515d
|
100 623
|
9.4.33 Measurement Type
|
Attribute Identifier 1 Measurement Number 2 Measurement Number shall be coded as follows: <reserved> <00-3F> <man.dep.> <40-FF>
|
e59ea8dcad939b2b08179091ad5f515d
|
100 623
|
9.4.34 Multi-drop BSC Link
|
Attribute Identifier 1 BTS Port Number 2 Timeslot Number 3 BTS Port Number <0-FF> Timeslot Number ETSI 55 ETSI TS 100 623 V5.0.0 (2000-05) (GSM 12.21 version 5.0.0 Release 1996) Time slot in 2 Mbps link <0-1F>
|
e59ea8dcad939b2b08179091ad5f515d
|
100 623
|
9.4.35 Multi-drop next BTS Link
|
Attribute Identifier 1 BTS Port Number 2 Timeslot Number 3 BTS Port Number <0-FF> Timeslot Number Time slot in 2 Mbps link <0-1F>
|
e59ea8dcad939b2b08179091ad5f515d
|
100 623
|
9.4.36 Nack Causes
|
Attribute Identifier 1 NACK Cause 2 Nack Causes shall be coded as follows: General Nack Causes: Incorrect message structure 01 Invalid message type value 02 <reserved> 03 <reserved> 04 Invalid Object class value 05 Object class not supported 06 BTS no. unknown 07 Baseband Transceiver no. unknown 08 Object Instance unknown 09 <reserved> <0A-0B> Invalid attribute identifier value 0C Attribute identifier not supported 0D Parameter value outside permitted range 0E Inconsistency in attribute list 0F 1) Specified implementation not supported 10 Message cannot be performed 11 2) <reserved> <12-18> Specific Nack Causes: Resource not implemented 19 Resource not available 1A Frequency not available 1B ETSI 56 ETSI TS 100 623 V5.0.0 (2000-05) (GSM 12.21 version 5.0.0 Release 1996) Test not supported 1C Capacity restrictions 1D Physical configuration cannot be performed 1E Test not initiated 1F Physical configuration cannot be restored 20 No such test 21 Test cannot be stopped 22 Message inconsistent with physical config. 23 3) Complete file not received 25 File not available at destination 26 File cannot be activated 27 Request not granted 28 Wait 29 Nothing reportable existing 2A Measurement not supported 2B Measurement not started 2C <reserved> <2D-7F> <man.dep.> <80-FE> NULL FF NOTE 1: This Nack cause shall apply to conflicting or incomplete data in the attribute list which prevents the BTS from performing the message. NOTE 2: This Nack cause shall apply when the message is valid and is supported by the BTS, but cannot be performed correctly for reasons not covered by other general or special Nack causes. NOTE 3: This Nack cause shall apply to the case where the data in attribute list is valid, but is beyond the capabilities of the particular BTS implementation.
|
e59ea8dcad939b2b08179091ad5f515d
|
100 623
|
9.4.37 Ny1
|
Attribute Identifier 1 Ny1 2 Ny1 shall be a binary presentation of maximum number of repetitions of PHYSICAL INFORMATION (see GSM 04.08, subclause 3.4.4.2.2).
|
e59ea8dcad939b2b08179091ad5f515d
|
100 623
|
9.4.38 Operational State
|
Attribute Identifier 1 Operational State 2 ETSI 57 ETSI TS 100 623 V5.0.0 (2000-05) (GSM 12.21 version 5.0.0 Release 1996) Operational States are in accordance with GSM 12.20 and shall be coded as follows: Disabled 01 Enabled 02 <reserved for future use> <03-FE> NULL(Operat. state not supported) FF
|
e59ea8dcad939b2b08179091ad5f515d
|
100 623
|
9.4.39 Overload Period
|
Attribute Identifier 1 Length 2-3 Overload Period 4 (cont.) (cont.) N
|
e59ea8dcad939b2b08179091ad5f515d
|
100 623
|
9.4.40 Physical Config
|
Attribute Identifier 1 Length 2-3 Required Test Config <man.dep.> 4 (cont.) (cont.) N Required Test Config is manufacturer dependent.
|
e59ea8dcad939b2b08179091ad5f515d
|
100 623
|
9.4.41 Power Class
|
Attribute Identifier 1 Power Class 2 Power Class is a binary presentation of transceiver power class as defined in GSM 05.05.
|
e59ea8dcad939b2b08179091ad5f515d
|
100 623
|
9.4.42 Power Output Thresholds
|
Attribute Identifier 1 Output Power Fault Threshold 2 Reduced Output Power Threshold 3 Excessive Output Power Threshold 4 When the carrier output power of the transmitter, including power amplifier and transmitter combiner, is below or above a power level, a fault shall be generated. There are two thresholds below the output power to indicate two different levels of fault severity, and one for threshold above. The range of Output Power Fault Threshold and Reduced Output Power Threshold is from -10 to -1 dB . The values shall be coded in 1 dB steps such that -10 dB is expressed with 0 and -1 dB with 9. Output Power Threshold <00-09> Reduced Output Power Threshold <00-09> The range of Excessive Output Power Threshold is from 2 dB to 5 dB. The value shall be coded in 1 dB steps such that 2 dB is expressed with binary value 0 and 5 dB with binary value 3. Excessive Output Power Threshold <00-03> ETSI 58 ETSI TS 100 623 V5.0.0 (2000-05) (GSM 12.21 version 5.0.0 Release 1996)
|
e59ea8dcad939b2b08179091ad5f515d
|
100 623
|
9.4.43 Probable Cause
|
Attribute Identifier 1 Probable Cause Type 2 Probable Cause Value 3 Probable Cause Value (cont.) 4 Probable Cause Type shall be coded as follows: ISO/CCITT values (X.721) 01 GSM specific values 02 Manufacturer specific values 03 <reserved for future use> <04-FF> For Probable Cause Value coding, the last numeric value of the object identifier value specified in ASN.1 syntax coding shall be used if Probable Cause Type is either 01 or 02.
|
e59ea8dcad939b2b08179091ad5f515d
|
100 623
|
9.4.44 RACH Busy Threshold
|
Attribute Identifier 1 RACH Busy Threshold 2 RACH Busy Threshold shall be a binary presentation of -x dBm in the range <0-FF>.
|
e59ea8dcad939b2b08179091ad5f515d
|
100 623
|
9.4.45 RACH Load Averaging Slots
|
Attribute Identifier 1 RACH Load Averaging Slots (MSB) 2 RACH Load Averaging Slots (LSB) 3 RACH Load Averaging Slots shall be a binary presentation of number of RACH burst periods in the range <0-FFFF>.
|
e59ea8dcad939b2b08179091ad5f515d
|
100 623
|
9.4.46 Radio Sub Channel
|
Attribute Identifier 1 Radio Sub Channel 2 Radio Sub Channel shall be coded as follows: Half rate channel 0 00 Half rate channel 1 01
|
e59ea8dcad939b2b08179091ad5f515d
|
100 623
|
9.4.47 RF Max Power Reduction
|
Attribute Identifier 1 RF Max Power Reduction 2 RF Max Power Reduction shall be a binary presentation of the number of 2 dB power reduction steps as defined in GSM 05.05. This represents "Pn" as used in GSM 08.58. ETSI 59 ETSI TS 100 623 V5.0.0 (2000-05) (GSM 12.21 version 5.0.0 Release 1996)
|
e59ea8dcad939b2b08179091ad5f515d
|
100 623
|
9.4.48 Site Inputs
|
Attribute Identifier 1 Length 2-3 Site Input 4 (cont.) (cont.) N If Site Inputs are requested from Site Manager with message Get Attributes, all inputs shall be listed. Each octet from 4 to N controls one Site input. Each of these octets contain the input number and the state of the input and they shall be coded as follows. 8 7 6 5 4 3 2 1 State Input number State shall be a binary presentation of the input state, 0 or 1. Input number shall be a binary presentation of input number. Note that maximally 128 binary inputs can be supported.
|
e59ea8dcad939b2b08179091ad5f515d
|
100 623
|
9.4.49 Site Outputs
|
Attribute Identifier 1 Length 2-3 Site Output 4 (cont.) (cont.) N If Site Outputs are sent to Site Manager with message Set Site Outputs, the site outputs shall be generated as indicated by the message. Coding of this information element shall be the same as for Site Inputs. Note that maximally 128 binary site outputs can be supported.
|
e59ea8dcad939b2b08179091ad5f515d
|
100 623
|
9.4.50 Source
|
Attribute Identifier 1 Length 2-3 Source 4 (cont.) (cont.) N Source identifies a unit of equipment that shall be "changed from" on a Change-over operation. How to identify a type of equipment and how to identify a specific unit of this type is manufacturer dependent.
|
e59ea8dcad939b2b08179091ad5f515d
|
100 623
|
9.4.51 Specific Problems
|
Attribute Identifier 1 Specific Problems 2 Specific Problems <reserved for future use> <00-0F> <man.dep.> <10-FF> ETSI 60 ETSI TS 100 623 V5.0.0 (2000-05) (GSM 12.21 version 5.0.0 Release 1996)
|
e59ea8dcad939b2b08179091ad5f515d
|
100 623
|
9.4.52 Starting Time
|
Attribute Identifier 1 Current Frame No (MSB) 2 Current Frame No (LSB) 3 Current Frame No shall be a binary presentation FN Modulus 42432.
|
e59ea8dcad939b2b08179091ad5f515d
|
100 623
|
9.4.53 T200
|
Attribute Identifier 1 SDCCH ( 5 ms) 2 FACCH/Full rate ( 5 ms) 3 FACCH/Half rate ( 5 ms) 4 SACCH with TCH SAPI0 (10 ms) 5 SACCH with SDCCH (10 ms) 6 SDCCH SAPI3 ( 5 ms) 7 SACCH with TCH SAPI3 (10 ms) 8 Each field shall be a binary presentation of time units mentioned in brackets. NULL (FF) means the value is not specified (see GSM 04.06).
|
e59ea8dcad939b2b08179091ad5f515d
|
100 623
|
9.4.54 TEI
|
Attribute Identifier 1 TEI 2 TEI (see GSM 08.56): Initial TEI <00-3F> Additional TEI <40-7E> <not used> <7F-FF>
|
e59ea8dcad939b2b08179091ad5f515d
|
100 623
|
9.4.55 Test Duration
|
Attribute Identifier 1 Test Duration 2-3 Test Duration shall be a binary presentation of seconds in range <01-FFFF>indicating the time the test should last.
|
e59ea8dcad939b2b08179091ad5f515d
|
100 623
|
9.4.56 Test No
|
Attribute Identifier 1 Test Number 2 Test Number shall be coded as follows: Radio loop test via antenna 00 Radio loop test via transceiver 01 BTS functional object self test 02 <reserved> <03-3F> ETSI 61 ETSI TS 100 623 V5.0.0 (2000-05) (GSM 12.21 version 5.0.0 Release 1996) <man.dep.> <40-FF>
|
e59ea8dcad939b2b08179091ad5f515d
|
100 623
|
9.4.57 Test Report Info
|
Attribute Identifier 1 Length 2-3 Test Result Info 4 (cont.) (cont.) N If the test was either radio loop test via antenna or radio loop test via transceiver, octets 3 and 4 are defined. Octet 3 shall include a binary presentation of RXLEV value in the range of 0-3F such that value 0 equals to -110 dBm or less and 3F equals to -48 dBm or more. Octet 4 shall express bit error rate (BER) of received bit stream in 0,1% steps in the range 0,0% - 12,8% such that 0 equals to 0,0% BER and 128(dec) equals to 12,8% BER or more. If the test was BTS functional object self test, octet 3 shall indicate pass or fail for the test of the functional object on the BTS by value 1 or 0 where 0 is the code for fail. In the defined test cases Test Result Info may also contain manufacturer dependent information in subsequent octets. In other tests, Test Result Info is manufacturer dependent.
|
e59ea8dcad939b2b08179091ad5f515d
|
100 623
|
9.4.58 VSWR Thresholds
|
Attribute Identifier 1 Faulty Antenna Threshold 2 Antenna Not Adjusted Threshold 3 VSWR Thresholds shall be used in association with the "faulty receiver (transmitter) antenna" or "receiver (transmitter) antenna not adjusted" Probable Cause. The VSWR range for both thresholds is 1,2 - 3,0. The value shall be coded in 0,1 steps such that 1,2 is expressed with 0 and 3,0 with 12(hex). Faulty Antenna Threshold <00-12> Antenna Not Adjusted Threshold <00-12>
|
e59ea8dcad939b2b08179091ad5f515d
|
100 623
|
9.4.59 Window Size
|
Attribute Identifier 1 Window Size 2 Window Size shall be a binary presentation of the number of layer 3 Load Data Segment messages to be sent before a layer 3 acknowledgment needs to be issued. Value 0 is not used.
|
e59ea8dcad939b2b08179091ad5f515d
|
100 623
|
9.4.60 TSC
|
Attribute Identifier 1 Training Sequence Code 2 For details of Traing Sequence Codes, see GSM 05.02. TSC values <00-07> <not used> <08-FE> ETSI 62 ETSI TS 100 623 V5.0.0 (2000-05) (GSM 12.21 version 5.0.0 Release 1996)
|
e59ea8dcad939b2b08179091ad5f515d
|
100 623
|
9.4.61 SW Configuration
|
Attribute Identifier 1 Length 2-3 SW Description 1 4 ... SW Description n N SW Configuration shall contain a list of SW Descriptions related to the managed object.
|
e59ea8dcad939b2b08179091ad5f515d
|
100 623
|
9.4.62 SW Description
|
Attribute Identifier 1 File Id 2 File Version N
|
e59ea8dcad939b2b08179091ad5f515d
|
100 623
|
9.4.63 Perceived Severity
|
Attribute Identifier 1 Severity Value 2 Severity Value shall be coded as follows: failure ceased 00 critical failure 01 major failure 02 minor failure 03 warning level failure 04 indeterminate failure 05 <reserved> <06-3F> <man, dep.> <40-FF>
|
e59ea8dcad939b2b08179091ad5f515d
|
100 623
|
9.4.64 Get Attribute Response Info
|
Attribute Identifier 1 Length 2-3 Count of not-reported attributes 4 (Each not-reported atttribute id) (cont.) (cont.) ...... (Each reported attribute id and its value) (cont.) (cont.) N ETSI 63 ETSI TS 100 623 V5.0.0 (2000-05) (GSM 12.21 version 5.0.0 Release 1996) The BTS shall make a best effort to report on all the attributes requested by the associated Get Attributes message. The Length indicates the length of the entire Get Attribute Response Info which may possibly go over a single segment message and should not be confused with the length of the data put in one single message frame (see subclause 8.1.1). The Count of not reported attributes entry shall indicate the binary integer coded value of the count of the attributes requested but the BTS could not report on because the attributes are either not supported or not yet defined. In case of a non-zero value of the above counter, the Each not- reported attribute id entry shall list the Id of each attrute not reported and shall continue as many as indicated by the above counter. The Each reported attribute id and its value entry shall list each reported attribute id and its value pair coded and formatted for every applicable attribute or parameter as specified in this subclause (subclause 9.4) and shall continue until all reported attributes are included in the response.
|
e59ea8dcad939b2b08179091ad5f515d
|
100 623
|
9.4.65 Outstanding Alarm Sequence
|
Attribute Identifier 1 Pending Reports 2 The integer coded Pending Reports field indicates the number of pending Failure Event Report messages to follow the current message as a response to the associated Report Outstanding Alarms message. This value being 0 signals that it is the last message for the outstanding alarms.
|
e59ea8dcad939b2b08179091ad5f515d
|
100 623
|
9.4.66 HW Conf Change Info
|
Attribute Identifier 1 Length 2-3 HW Description Position Index 1 4 Operation Code 1 5 Modification Data 1 (only if needed) ...... HW Description Position Index K Operation Code K Modification Data K (only if needed) N HW Description Position Index, Operation Code, and Modification Data constitute an associated tripplet for each HW Description change operation. The triplet may be repeated as many as needed. All the changes indicated in one Change HW Configuration message must be successfully conducted or the procedure must fail otherwise. The HW Description Position Index, an octet coded integer, indicates the HW Description’s position in the HW Configuration attribute to which the change operation indicated by the associated Operation Code must be applied. In case of multiple entries, all the position indices shall be interpreted against the initial HW Configuration sequence. There are three possible operations as listed below: deletion 00 insertion 01 modification 02 By a deletion operation, the indexed HW Description is deleted from the HW Configuration attribute. A deletion operation requires no associated Modification Data. An insertion or modification operation requires an associated Modification Data which specifies the new data for the operation. By a modification operation, the indexed HW Description in the HW Configuration attribute is replaced with the provided Modification Data. Deletion and modification operations are mutually exclusive at one position. By an insertion operation, the provided Modification Data is inserted immediately after the indexed HW Description in the HW Configuration attribute. An insertion at a position indexed zero (0) is interpreted as prepending to the very beginning. More than one insertion operation at one identically indexed position shall produce a HW Configuration sequence in which the inserted Descriptions are ordered the way as they appear in the HW Conf Change Info field. ETSI 64 ETSI TS 100 623 V5.0.0 (2000-05) (GSM 12.21 version 5.0.0 Release 1996) History Document history V5.0.0 May 2000 Publication
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
1 Scope
|
The present document describes the requirements for the management of performance measurements and the collection of performance measurement data across a Public Land Mobile Network (PLMN). It defines the administration of measurement schedules, the generation of measurement results in the Network Elements (NEs) and the transfer of these results to the Operations System (OS). It also describes how the various requirements can be modelled as part of the generic PLMN information model. A set of measurements available for collection by NEs are described in annex B, effort has been made to ensure consistency in the definition of measurements between different NEs. The following is beyond the scope the present document: - how the data, once accumulated and collected, could or should be processed, stored, or presented to an end user; - the information which may be obtained through the collection and processing of call or event related records which have been produced by the NEs primarily for the purpose of raising bills and other charges. The management requirements have been derived from existing telecommunications operations experience. The management definitions were then derived from other standardisation work so as to minimise the re-invention factor. References are given as appropriate. The objectives of the present documentisation are: to normalise the description of each measurement; and to produce a common description of the management technique for result accumulation and transmission across a management interface. The normalisation is intended to result in comparability of measurement data produced in a multi-vendor PLMN. As far as possible, existing standardisation in the area of performance management has been re-used and enhanced where particular requirements, peculiar to the mobile telephony environment, have been recognised. Field of application The present document considers all aspects of performance management for a PLMN and its NEs defined in the GSM core Technical Specifications. However, only those aspects which are GSM specific and particular to PLMN operation are included in the present document. Other performance measurement aspects of described NEs and performance measurement aspects of NEs not described by the GSM core Technical Specifications are included for information purposes in annex E or may be found in referenced documents.
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
1.1 References
|
The following documents contain provisions which, through reference in this text, constitute provisions of the present document. • References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. • For a specific reference, subsequent revisions do not apply. • For a non-specific reference, the latest version applies. • A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the same number. • For this Release 1998 document, references to GSM documents are for Release 1998 versions (version 7.x.y). [1] GSM 02.16: "Digital cellular telecommunication system (Phase 2+); International Mobile station Equipment Identities (IMEI)". [2] GSM 04.08: "Digital cellular telecommunication system (Phase 2+); Mobile radio interface layer 3 specification". ETSI ETSI TS 100 615 V7.0.0 (2000-02) 20 (GSM 12.04 version 7.0.0 Release 1998) [3] GSM 04.11: "Digital cellular telecommunication system (Phase 2+); Point-to-Point (PP) Short Message Service (SMS) support on mobile radio interface". [4] GSM 05.08: "Digital cellular telecommunication system (Phase 2+); Radio subsystem link control". [5] GSM 08.08: "Digital cellular telecommunication system (Phase 2+); Mobile Switching Centre - Base Station System (MSC - BSS) interface Layer 3 specification". [6] GSM 08.58: "Digital cellular telecommunication system (Phase 2+); Base Station Controller - Base Transceiver Station (BSC - BTS) interface Layer 3 specification". [7] GSM 09.02: "Digital cellular telecommunication system (Phase 2+); Mobile Application Part (MAP) specification". [8] GSM 12.00 (ETS 300 612-1): "Digital cellular telecommunication system (Phase 2); Objectives and structure of Network Management (NM)". [9] GSM 12.01 (ETS 300 612-2): "Digital cellular telecommunication system (Phase 2); Common aspects of GSM Network Management (NM)". [10] GSM 12.06 (ETS 300 617): "Digital cellular telecommunication system (Phase 2); GSM Network Configuration Management ". [11] GSM 12.30 (ETR 128): "Digital cellular telecommunication system (Phase 2); ETSI Object Identifier tree; Common domain; Mobile domain; Operation and Maintenance (O&M), managed object registration definition". [12] CCITT Recommendation E.880: "Field data collection and evaluation on the performance of equipment, network and services". [13] CCITT Recommendation X.710: "Common management information service definition for CCITT applications". [14] CCITT Recommendation X.721: "Information technology - Open Systems Interconnection - Structure of management information: Definition of management information". [15] CCITT Recommendation X.730: "Information technology - Open Systems Interconnection - Systems Management: Object management function". [16] CCITT Recommendation X.731: "Information technology - Open Systems Interconnection - Systems Management: State management function". [17] CCITT Recommendation X.734: "Information technology - Open Systems Interconnection - Systems Management: Event report management function". [18] CCITT Recommendation X.735: "Information technology - Open Systems Interconnection - Systems Management: Log control function". [19] CCITT Recommendation X.738: "Information technology - Open Systems Interconnection - Systems management: Summarization function". [20] CCITT Recommendation X.739: "Information technology - Open Systems Interconnection - Systems Management: Metric objects and attributes". [21] ISO 8571: "File Transfer, Access and Management". [22] GSM 03.60: "Digital cellular telecommunications system (Phase 2+); General Packet Radio Service (GPRS); Service Description; Stage 2". [23] GSM 04.60: "Digital cellular telecommunications system (Phase 2+); General Packet Radio Service (GPRS); Mobile Station (MS) - Base Station System (BSS) interface; Radio Link Control / Medium Access Control (RLC/MAC) protocol". ETSI ETSI TS 100 615 V7.0.0 (2000-02) 21 (GSM 12.04 version 7.0.0 Release 1998) [24] GSM 04.64: "Digital cellular telecommunications system (Phase 2+); General Packet Radio Service (GPRS); Logical Link Control (LLC)". [25] GSM 04.65: "Digital cellular telecommunications system (Phase 2+); General Packet Radio Service (GPRS); Subnetwork Dependent Convergence Protocol (SNDCP)". [26] GSM 08.16: "Digital cellular telecommunications system (Phase 2+); General Packet Radio Service (GPRS); Base Station System (BSS) - Serving GPRS Support Node (SGSN) interface; Network Service". [27] GSM 09.60: "Digital cellular telecommunications system (Phase 2+); General Packet Radio Service (GPRS); GPRS Tunnelling Protocol (GTP) across the Gn and Gp Interface". [28] IETF RFC 959 File Transfer Protocol (FTP) [29] IETF RFC 783 Trivial File Transfer Protocol (TFTP) revision 2 [30] IETF RFC 1157 A Simple Network Management Protocol (SNMP) ETSI ETSI TS 100 615 V7.0.0 (2000-02) 22 (GSM 12.04 version 7.0.0 Release 1998)
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
1.2 Abbreviations
|
For the purposes of the present document, the following abbreviations apply: AGCH Access Grant Channel APN Access Point Name AuC Authentication Centre BSC Base Station Controller BSS Base Station System BSSAP BSS Application Part BTS Base Transceiver Station CBCH Cell Broadcast Channel CCCH Common Control Channel CCITT The International Telegraph and Telephone Consultative Committee CMIP Common Management Information Protocol CMIS Common Management Information Service CMISE Common Management Information Service Element DCCH Dedicated Control Channel DCN Data Communication Network EIR Equipment Identity Register ETSI European Telecommunications Standards Institute FACCH Fast Associated Control Channel FTAM File Transfer Access and Management FTP File Transfer Protocol GMSC Gateway Mobile Services Switching Centre GGSN Gateway GPRS Service Node GPRS General Packet Radio Service GSN GPRS Service Node HLR Home Location Register HO Handover HPLMN Home PLMN IMEI International Mobile Equipment Identity IMSI International Mobile Subscriber Identity ISDN Integrated Service Digital Network ISO International Standards Organisation LLC Logical Link Control LR Location Register MMI Man-Machine Interface MML Man-Machine Language MOC Managed Object Class MOI Managed Object Instance MS Mobile Station MSC Mobile Services Switching Centre MSRN Mobile Subscriber Roaming Number MTP Message Transfer Part NE Network Element NMC Network Management Centre NSS Network Sub System (including EIR, HLR, SMS-IWMSC, MSC and VLR) OACSU Off Air Call Set Up OA&M Operation, Administration and Maintenance OMAP (CCITT) Operations, Maintenance and Administration Part OMC Operations and Maintenance Centre OS Operations System OSI Open System Interconnection O&M Operations and Maintenance PCCCH Packet Common Control Channel PCCH Packet Paging Channel PCH Paging Channel PLMN Public Land Mobile Network (including BSS and NSS) PM Performance Management ETSI ETSI TS 100 615 V7.0.0 (2000-02) 23 (GSM 12.04 version 7.0.0 Release 1998) PTCH Packet Traffic Channel PVLR Previous VLR QOS Quality of Service RACH Random Access Channel Rec. Recommendation Ref. Reference RF Radio Frequency RR Radio Resource RXLEV Reception Level RXQUAL Reception Quality ROSE Remote Operation Service Element SACCH Slow Associated Control Channel SDCCH Stand alone Dedicated Control Channel SCCP (CCITT) Signalling Connection Control Part SGSN Serving GPRS Service Node SNDCP Sub Network Dependency Control Protocol SNMP Simple Network Management Protocol SMS-IWMSC Short Message Service Inter Working MSC Spec. Specification SS Supplementary Service TCAP (CCITT) Transaction Capabilities Application Part TCH Traffic Channel TMSI Temporary Mobile Subscriber Identity TMN Telecommunications Management Network TS Technical Specification VLR Visitors Location Register ETSI ETSI TS 100 615 V7.0.0 (2000-02) 24 (GSM 12.04 version 7.0.0 Release 1998)
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
2 Performance measurement concept
|
Any evaluation of PLMN system behaviour will require performance data collected and recorded by its NEs according to a schedule established by the OS. This aspect of the management environment is termed Performance Management. The purpose of any performance management activity is to collect data which can be used to verify the physical and logical configuration of the PLMN and to localise potential problems as early as possible. The type of data to be collected is defined by the equivalent measurements, refer to annex B. The present document concentrates on the requirements of PLMN management to produce this data. Any management actions performed at the OS subsequently to analyse the performance data are not considered in the present document. Data is required to be produced by the NEs to support the following areas of performance evaluation: - traffic levels within the PLMN, including the level of both the user traffic and the signalling traffic; - verification of the network configuration; - resource access measurements; - Quality of Service (e.g. delays during call set-up); and - resource availability (e.g. the recording of begin and end times of service unavailability). The production of the measurement data by the NEs also needs to be administered by the OS. Several phases of administration of performance measurements can be distinguished: - the management of the performance measurement collection process; - the generation of performance measurement results; - the local storage of measurement results in the NE; - the transfer of measurement results from the NE to an OS; and - the storage, preparation and presentation of results to the operating personnel. It is not the task of the present document to describe the last phase mentioned above, viz. the preparation and presentation of the results to operating personnel: this is regarded as being specific to each PLMN Operator.
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
2.1 Measurement data requirements
|
This subclause describes the typical requirements for performance data to be produced by the NEs which comprise a PLMN. It is important to note that an actual measurement value collected from the PLMN may be used to satisfy requirements in more than one category of measurement as described below. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 25 (GSM 12.04 version 7.0.0 Release 1998)
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
2.1.1 Traffic measurements
|
Traffic measurements provide the data from which, among other uses, the planning and operation of the network can be carried out. The types of traffic evaluations for which PLMN specific measurements may be used include: - traffic load on the radio interface (signalling and user traffic); - usage of resources within the network nodes; - user activation and use of Supplementary services, etc. Examples of measured values may include: - Pages per Location area per hour; - Busy Hour Call Attempts per BSC, MSC; - Handovers per BSC per hour, etc.
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
2.1.2 Network configuration evaluation
|
Once a network plan, or changes to a network plan, have been implemented it is important to be able to evaluate the effectiveness of the plan or planned changes. Typically, the measurements required to support this activity will indicate the traffic levels with particular relevance to the way the traffic uses the network.
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
2.1.3 Resource access
|
For accurate evaluation of resource access, each count would need to be produced for regular time intervals across the network, or for a comparable part of the network.
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
2.1.4 Quality Of Service (QOS)
|
The user of a PLMN views the provided service from outside the network. That perception can be described in observed QOS terms. QOS can indicate the PLMN performance expected to be experienced by the user, for further detail see CCITT Recommendation E.880 [12].
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
2.1.5 Resource availability
|
The availability performance is dependent on the defined objectives, i.e. the availability performance activities carried out during the different phases of the life cycle of the system, and on the physical and administrative conditions, for further detail see CCITT Recommendation E.880 [12].
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
2.2 Measurement administration
|
The range of measurements which will be available from the NEs are expected to cover all of the requirements described in subclause 2.1. However, not all of these measurements will be required all of the time, from every occurrence, of every relevant NE. With a highly distributed network like a PLMN it is also necessary to gather the measurement data so as to perform consistent analysis of the results and to evaluate the interactions between the NEs. This subclause describes the requirements for the various areas of administration of measurements.
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
2.2.1 Measurement job administration
|
Measurement jobs, i.e. the processes which accumulate the data and assemble it for collection and/or inspection, will need to be scheduled for the period or periods for which gathering of data should be performed. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 26 (GSM 12.04 version 7.0.0 Release 1998) The administration of measurement jobs comprise the following actions: 1) create/delete a measurement job; 2) modifying a measurement job; 3) definition of measurement job scheduling; 4) reporting and routing of results (to one or more OSs); 5) Suspend/Resume an active measurement job; 6) retrieval of information related to measurement jobs.
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
2.2.2 Measurement result collection method
|
Each measurement job will be collecting result data at a particular frequency, known as the granularity of the measurement. The measurement data can be collected in each NE of the PLMN in a number of ways: - cumulative incremental counters triggered by the occurrence of the measured event; - status inspection (i.e. a mechanism for high frequency sampling of internal counters at pre-defined rates); - gauges (i.e. high tide mark, low tide mark); - discrete event registration, where data related to a particular event is captured. These are described in the following paragraphs. Cumulative counters: The NE maintains a running count of the event being counted. Status inspection: Network elements maintain internal counts for resource management purposes. These counts are read at a predetermined rate, the rate is usually based upon the expected rate of change of the count value. Gauges: Gauges represent dynamic variables that may change in either direction. Gauges can be integer or real valued. Discrete Event Registration: This is a measurement of a specified event where every Nth event would be taken into account. The value of N is dependant on the frequency of occurrence of the event being measured.
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
2.2.3 Local storage of results at the Network Element
|
It shall be possible for the NE to retain measurement data it has produced until they are retrieved by the OS. This data will be retained at the NE as an explicit request from the OS. The storage capacity and the duration for which the data will be retained at the NE will be PLMN Operator and implementation dependent.
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
2.2.4 Measurement result transfer
|
The results of the measurement job can be forwarded to the OS when available or be stored in the NE and retrieved by the OS when required. Additionally, the measurement result can be retrieved from the NE by the OS on request, this will return the current value of the measurement job with any other related information, but will not affect the scheduled execution of this or any other measurement jobs actively reporting that same data item. In a network with more than one OS, the data produced may also be required by other OSs, it is, therefore, necessary to support the possibility for multiple destinations for transfer of data.
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
2.2.5 Performance data presentation
|
The performance data presentation is considered to be a PLMN Operator concern. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 27 (GSM 12.04 version 7.0.0 Release 1998)
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
2.3 Measurement definition
|
This subclause looks at the requirements for the definition of the individual measurements.
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
2.3.1 Nature of the result
|
The measurements defined for the PLMN have to be collected in the NEs. As each NE has its own role to play in the provision of the mobile telephony service then each will have a different perspective on the performance of the network. The measurement definitions shall, therefore, contain a description of the intended result of the measurement in terms of what is being measured.
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
2.3.2 Perceived accuracy
|
The accuracy of measurements can be seen in three ways: - whether the result produced represents all occurrences of the defined event; - whether related measurements produced for the same period refer to the same events; or, - whether a measurement result refers to the whole or part of a granularity period. Representation of all occurrences: The definition of a measurement needs to accurately reflect which types of events are to be included in the collection of the data. If a general event description can be characterised by several Sub-types then the measurement definition will have to be precise as to which Sub-types are included or specifically excluded from that measurement. Same period for the same two event: Consider two events being counted which refer to the same allocation attempt, falling on either side of a granularity period boundary. i.e. the attempt is counted in one period while the termination with a successful cause is counted in the subsequent period. This will lead to discrepancies appearing in the actual figures when trying to compare attempts and successes for the same period. The discrepancy may be statistically insignificant if the expected use of the procedure is high. If the expected use is low then it may prove more acceptable to count the procedure termination by causes, e.g. successful termination, unsuccessful termination for all reasons. (If the definition of a measurement refers to specific unsuccessful termination causes then care should be taken to assess whether all causes are included - the sum of which can provide the total number of unsuccessful termination's - or whether the total is defined as well as the specific causes). Measurement collection periods: A typical measurement collection period can be interrupted by system events. These interruptions can be one or more of the following: - failure of the resource; - failure of procedure being measured; - resource only becomes available after the measurement period has commenced; - procedure only becomes available after the measurement period has commenced. In these cases the measurement result should highlight such interruptions to indicate that the result is suspect. Any actions to be taken subsequently with regards to the usefulness of the data will depend on the circumstances and the requirements of individual PLMN Operators. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 28 (GSM 12.04 version 7.0.0 Release 1998)
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
2.3.3 Comparability of measurement data
|
In a multi-vendor network it can be important to know that measurement data produced by a NE from one supplier is equivalent to the measurement data being produced by the equivalent NE from a another supplier. This is particularly important when analysing data across the whole Network. The measurement definitions (in annex B), while not being explicit about precisely where a measurement should be performed, shall use a common understanding of the events being measured so as to produce comparable results.
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
2.3.4 Measurement identification
|
In complex Networks it is easy to generate large amounts of performance data. It is essential that all data is recognisable in respect of each request made. As all the required information which can distinguish each request already exists (part of the request), it makes sense to use this information, rather than create anything new.
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
3 Performance management requirements
| |
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
3.1 Introduction
|
This subclause describes all basic functions to allow the system operator to collect measurement data from the NEs and to forward the results to the OS. All functions are gathered to provide the system operator with the means to administer, plan, execute measurements and to store and evaluate the measurement results.
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
3.1.1 Basic functions
|
The performance management concept as applicable in this specification is outlined in figure 1 and is based on the general framework for PLMN management as outlined in GSM 12.00 [8] and GSM 12.01 [9]. OS NE NE NE NE DCN Measurement result presentation Measurement result transfer Measurement data collection Figure 1: Performance management concept The basic requirement from an NE for measurements is to collect data according to the definition of the measurements and to return results to the OS. The OS shall be able to administer the measurements and to receive and store the collected data. The measurements that will generate this data are defined in annex B. This data may be used in its original form or processed according to the system operator requirements. The data collected in the NE will be made available according to measurement parameters (scheduled reports), or on request from the OS (request current results). ETSI ETSI TS 100 615 V7.0.0 (2000-02) 29 (GSM 12.04 version 7.0.0 Release 1998) Using OSI standardised mechanisms, the OS can control: - the transfer of scheduled reports from the NE to the OS; - the storage of scheduled reports in the NE; and - deferred retrieval of scheduled reports stored in the NE. The present document does not address the latter aspects in full detail, as general and generic functions apply. It does, however, describe the use of these functions in the PLMN measurement system. As mentioned in subclause 2.2.5, measurement result presentation is considered to be a PLMN Operator concern. It is therefore not a subject of the present document. The format of the returned measurement results from OS point of view, however, will be ASN.1 using basic encoding rules.
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
3.1.2 Measurement administration
|
(Performance) measurement administration functions allow the system operator to determine measurement data collection and forwarding to an OS. A (performance) measurement concept covers: 1) measurement data collection requirements: - Measurement types. Corresponds to the measurements as defined in annex B; - Measured network resources. The resource(s) to which the measurement types shall be applied have to be specified, e.g. one or more BTS(s); - Measurement recording, consisting of periods of time at which the NE is collecting (that is, making available in the NE) measurement data. 2) measurement reporting requirements: - the measurement related information to be reported and the layout of this report have to be specified as part of the measurement. The frequency at which scheduled result reports shall be generated has to be defined. 3) measurement result transfer requirements: - measurement results can be transferred from the NE to the OS according to the measurement parameters, and/or they are stored in the NE and can be retrieved by the OS when required. Current measurement results can be transferred from the NE to the OS on explicit OS request. A (performance) measurement job, covers the measurement data collection and measurement reporting requirements, as described in points 1 and 2 above. A measurement job can be created, modified, displayed or deleted in the OS. In addition, measurement job activities can be suspended and resumed, and, if the measurement job is not suspended, the current values of the measurements that are included in the measurement job can be requested by the OS at any time, independent of the measurement parameters. The system operator shall specify the required measurement parameters on initiation of a measurement job. These parameters consist of, among others, recording schedule, granularity, and measurement type(s).
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
3.2 Measurement jobs
|
When defining a measurement job, the following aspects have to be considered: ETSI ETSI TS 100 615 V7.0.0 (2000-02) 30 (GSM 12.04 version 7.0.0 Release 1998)
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
3.2.1 Measurement job characteristics
| |
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
3.2.1.1 Measurement types
|
Every measurement job consists of one or more measurement types (defined in annex B), for which it collects measurement data. The measurement type(s) contained in a job may apply to one or more network resources of the same type, e.g. a measurement job may be related to one or several BTSs. A measurement job will only produce results for the measurement type(s) it contains.
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
3.2.1.2 Measurement schedule
|
The measurement schedule specifies the time frame during which the measurement job will be active. The measurement job is active as soon as the starttime - if supplied in the schedule - is reached. The system shall support a job starttime of up to at least 90 days from the job creation date. If no starttime is provided, the measurement job shall become active immediately. The measurement job remains active until the stoptime - if supplied in the schedule - is reached. If no job stoptime is specified the measurement job will run indefinitely and can only be stopped by manual intervention. The time frame defined by the measurement schedule may contain one or more recording intervals. These recording intervals may repeat on a daily and/or weekly basis and specify the time periods during which the measurement data is collected within the NE. A recording interval is identified by an interval starttime and an interval endtime which lie between 00.00 and 24.00 hours, aligned on granularity period boundaries. Thus the length of a recording interval will be a multiple of the granularity period (if non-zero). For a single measurement type it shall be possible to specify several measurement jobs with different recording intervals as long as these intervals do not overlap. If it is required that a measurement type be observed by multiple measurement jobs with overlapping schedules than the system shall support multiple instances of that measurement type.
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
3.2.1.3 Granularity period
|
The granularity period is the time between the initiation of two successive gatherings of measurement data. Required values for the granularity period are 5 minutes, 15 minutes, 30 minutes, 1 hour. The minimum granularity period is 5 minutes in most cases, but for some measurements it may only make sense to collect data in a larger granularity period. The granularity period shall be synchronised on the full hour and its value is not required to be changeable during the lifetime of the job. If the specified granularity period is zero then the measurement data can only be gathered on request from the OS.
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
3.2.1.4 Measurement reporting
|
Scheduled measurement reports are produced at the end of each granularity period. All reports generated by a particular measurement job have the same layout and contain the information requested by the system operator. This information may consist of: - an identification of the measurement job that generated the report; - an identification of the involved measurement type(s) and the measured network resource(s) (e.g. BTS); - a time stamp, referring to the end of the granularity period; - for each measurement type, the result value and an indication of the validity of the result value; - an indication that the scan is not complete, and the reason why the scan could not be completed. Whatever method of data compression is selected, the returned measurement result shall not be compromised, i.e. it shall not result in loss of any necessary information. Some flexibility is provided in order to limit the information that is to be reported by the NE, reducing the amount of data to be transferred between NE and OS. Options that can be selected are: - suppressing the reporting of the identification of the observed network resource; - reporting the measurement results in an agreed order, so an explicit identification of the associated measurement type is not required in the measurement reports; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 31 (GSM 12.04 version 7.0.0 Release 1998) - suppressing multiple reporting of measurement results when they are the same across all observed network resources.
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
3.2.2 Measurement job state and status attributes
|
According to the OSI systems management concept, the state of a resource is reflected in indicators (attributes). Status attributes are provided to qualify these state attributes. Full details are provided in CCITT Recommendation X.731 [16]. As for a measurement job, the following information is provided: Administrative state: The administrative state attribute allows the system operator to permit or prohibit administratively the execution of the measurement job. Operational state: The operational state attribute reflects the operability of the measurement job. Availability status: The availability status attribute denotes particular conditions applicable to the measurement job. It indicates: - whether or not the measurement job is collecting measurement data according to its schedule; - if, for whatever reason, some of the requested measurement data cannot be collected by the measurement job, in particular whether the measurement schedule inhibits the collection of measurement data.
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
3.2.3 Measurement job administration
|
Creating a measurement job: On creation of a measurement job, all information has to be supplied in order to collect the required data from the selected network resources as specified by the measurement job characteristics (see subclause 3.2.1). Modifying a measurement job: In general, the modification of measurement job parameters may be requested by the OS during the lifetime of a measurement job when the job is suspended (explained below). Displaying a measurement job: The system operator shall be able to get a list of all measurements that are currently defined, together with all available actual information as stored in the NE. This information consists of the data that is supplied on creation/modification and the actual state and status information of the measurement job. Deleting a measurement job: A measurement job is automatically deleted by the system when it reaches the job endtime and all scheduled or explicitly requested measurement reports have been generated. A created measurement job can also be deleted by manual intervention at any time. When deleted, the measurement process associated with the job is stopped, and all allocated resources are freed. Suspending/resuming a measurement job: On normal operation, the measurement job collects measurement data within the NE according to the actual values of the measurement job parameters. However, the system operator may decide for some reason to discard temporarily the collection of measurement data (e.g. in case of system overload or congestion, measurement results not used, ...). The system operator therefore is able to suspend a defined measurement job at any time, using the Administrative State. This implies that the measurement job definition remains in the system, but that no measurement gathering activities are performed for this job. When the measurement job is resumed, measurement data collection is started again at the next granularity period within the measurement schedule. Requesting the current measurement result values of a measurement job: The system operator may for some reason be interested in the current values of the measurement results of a particular measurement job, independently of the scheduled data collection and subsequent reporting, e.g. for tracing the increment of some of the counters. To this aim, the system operator is able to request the actual values of the measurement results for the same network resources as defined in the measurement job. The current results are returned in the reply message for this request in a format which is identical to scheduled reports that are generated by the measurement job at the end of the granularity period. Any such request does not affect the measurement job, and may only be issued when the measurement job is active and not suspended, otherwise an error will be returned. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 32 (GSM 12.04 version 7.0.0 Release 1998)
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
3.3 Measurement results
| |
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
3.3.1 Measurement result characteristics
|
Each measurement produces a result at the end of the granularity period or on request of the OS, see above. Annex B provides for each measurement type a description of the expected measurement result. Scheduled reports: Measurement results for all measurements of a particular measurement job are gathered in a single report at the end of the granularity period. The system operator may to some extent determine in what format the measurement results are to be reported, since reporting requirements can be included in the measurement job definition. The report may contain, in addition to the specific measurement results, fixed information that is global for all measurement results associated with that measurement job, such as an identification of the involved network resources and a time stamp referring to the time at which the NE started collecting the measurement results. Request current results: On receipt of the request, the appropriate result values are produced, and a reply to the request is generated. The measurement job specific information contained in the reply and its format is identical to scheduled reports.
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
3.3.2 Transfer of measurement results
|
The measurement results are contained in scheduled reports and are generated by the measurement job according to the measurement job definition parameters, or they are sent to the OS as a result of a "request current results"-operation. Scheduled measurement reports: Are generated at the end of each granularity period if the measurement job is not suspended. They can be transferred to the OS in two ways: 1) immediate notifications: The reports are automatically forwarded to the OS at the end of the granularity period. 2) deferred retrieval: The reports are stored locally in the NE, where they can be retrieved when required. For each individual report, the transfer of measurement results in either one or both ways is to be established by the system operator. These requirements are covered completely by OSI standardised functions (Event Report Management Functions CCITT Recommendation X.734 [17], Log Control Functions CCITT Recommendation X.735 [18], CMIS, CCITT Recommendation X.710 [13], FTAM, ISO 8571 [21], SNMP Recommendation IETF RFC 1157 [24], FTP Recommendation IETF RFC 959 [28] ), Common Management Functions that are provided in GSM 12.00 [8] and the generic services that are provided in annex D of the present document. Request current results: Upon receipt of the request, the NE will generate an appropriate reply and send it immediately to the OS. There is no further control of the forwarding of the reply and no storage of the reply in the NE. 4 Detailed description of the measurement system for a PLMN
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
4.1 Introduction
|
Clause 3 of the present document describes the required functions for the administration of performance measurements and the retrieval of their results. For this purpose, the characteristics of measurement jobs and measurement results have been defined. This part of the ETS explains how these requirements can be met using standard OSI systems management functions or SNMP management operations and, where necessary, tailoring them for PLMN use. In the following, managed object classes and their properties (attributes, notifications, etc.) to be used on the object oriented interface between OS and NEs for the execution of performance management functions are specified. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 33 (GSM 12.04 version 7.0.0 Release 1998)
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
4.1.1 Basic measurement system functions
|
Before measurement data from the NEs can be collected and the results be forwarded to the OS, the measurement jobs that generate the required data shall be activated in the system. In object oriented terms, this corresponds to the instantiation of managed objects which model the measurement process. In order to control the measurement process, appropriate attributes of these objects shall be defined and have to be set to the required/desired values, either when the objects are created or during the lifetime of the objects. The specific attributes and their values will determine the measurement schedule, the measured network resources, the measurement types and the generation of scheduled result reports as well as the layout of the reports. Scheduled results can be forwarded to the OS using a notification that is defined specifically for this purpose as a part of the measurement object class definitions. A dedicated action will be used for requesting current results of active measurements.
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
4.1.2 Measurement Object Administration
|
The management of objects in an open system is performed utilising the internationally standardised "Common Management Information Service Element" (CMISE CCITT Recommendation X.710 [13] or IETF RFC 1157 A Simple Network Management Protocol (SNMP) [30]). Managed objects for the execution of PLMN performance measurement functions can be instantiated and deleted using the M-CREATE and M-DELETE services or SNMP SET and GET operations. Reading and modifying attributes of these objects can be achieved employing the M-GET and M-SET services of CMISE or SET and GET operations of SNMP. The CMISE M-EVENT-REPORT service and SNMP TRAP is defined for the emission of notifications, while actions can be executed using the M-ACTION service. Specific notifications defined in the OSI object management function (see CCITT Recommendation X.730 [15]) are used to notify the OS of the creation and deletion of managed objects and of the change of attribute values. For the formal definition of the PLMN performance management object model, refer to annex C. The measurement job can be ideally modelled by the managed object class "simpleScanner" as defined in CCITT Recommendation X.738 [19]. The "simpleScanner" is derived from the "homogeneousScanner" object class (see CCITT Recommendation X.738 [19]), which in turn is a specialisation of the "scanner" class of managed objects (see CCITT Recommendation X.738 [19]). The "simpleScanner" object has attributes to determine: - the measurement types; - the measured network resources; - the recording periods; and - the reporting requirements; of the measurement job. The "simpleScanner" generates measurement result reports in the form of notifications, according to the attributes that prescribe the reporting requirements. The measurement transfer requirements are not modelled in the scanner objects, since generic and general services are used (see subclause 4.3.2 and annex D).
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
4.2 Modelling of measurement jobs
|
A measurement job is represented by a "simpleScanner" object. The following subclauses define how the measurement job characteristics are mapped onto the properties of the "simpleScanner" managed object class, and how the measurement types of a measurement job are modelled in the PLMN performance measurement system.
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
4.2.1 Measurement job characteristics
| |
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
4.2.1.1 Measurement Function
|
Every measurement job collects measurement data from selected measurement types across one or more network resources of the same type. The selected measurement types shall be identical throughout all network resources observed by a measurement job. For each network resource, the related measurement types have been grouped in one or more measurement functions. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 34 (GSM 12.04 version 7.0.0 Release 1998) Measurement functions, are modelled by various "measurementFunction" object classes (see annex C). The measurement types for the PLMN performance measurement system are defined in annex B, and their result values are included as attributes in the appropriate "measurementFunction" object class. In case the measurement type is a counter, the attribute represents the counter value as is. In all other cases, the attribute delivers a calculated value (e.g. a mean), over the observed period. The "measurementFunction" objects are contained in the objects that represent the network resource to which the measurement types included in the "measurementFunction" refer. All measurement types that relate only to a network resource alone are grouped into one "measurementFunction" class which is unique for that network resource. Measurement types that are related to the network resource and the same type(s) of adjacent resource(s) (e.g. Handover neighbour cell) are also grouped into one unique type of measurement function which may exist once or more per instance or per set of that adjacent resource(s). The instances of the adjacent resources that are to be addressed by the measurement function are identified by the values of attributes which are part of that specific "measurementFunction" object class definition. Measurement types that belong together are grouped together in the same package (e.g. "immediateAssignmentProcedurePackage" has attributes "attemptedImmediateAssignmentProcedures" and "successfullImmediateAssignmentProcedures" - for details refer to annex C). Since all measurement types defined in annex B may or may not be supported by the system, all packages of a "measurementFunction" which contain measurement attributes are conditional. A "measurementFunction" needs to be created before a "simpleScanner" can scan its attributes, i.e. before actual measurements can be taken. The create request from the OS shall specify the values of attributes that identify adjacent resources (like Handover neighbour cell), if any, but it may not specify any measurement attributes of the "measurementFunction" object. Upon creation of a "measurementFunction" object, the system will determine the measurement packages that are included in the object according to the measurement types the system supports. If multiple instances of the same "measurementFunction" object class are created, the packages included in the various instances may be different from instance to instance since the system may have restrictions on how many measurement packages of the same type it supports. The OS can inquire the measurement types supported by a "measurementFunction" object from the system, by reading the "packages" attribute or the attribute list of the object (see CCITT Recommendation X.721 [14]). Unlike the former operation, the latter, however, will also return values of the measurement attributes which are not expected to be meaningful at this time (see below). Deletion of the "measurementFunction" will render the measurement types that correspond to the "measurementFunction" attributes unavailable to the OS. Creation and deletion of a "measurementFunction" will be notified to the OS using the object creation and deletion notifications as defined in CCITT Recommendation X.730 [15]. Each measurement job may collect data from one or more measurement types across one or more network resources, i.e. a "simpleScanner" object may make a choice of one or more "measurementFunction" instances and scan the same set of attributes across all selected measurement functions. For this purpose, it can scope the set of measurement functions that are eligible for inclusion in the observation, and it may select measurement functions using filtering criteria (similar to the concept of scoping and filtering as described in CCITT Recommendation X.710 [13]). Alternatively, it can use an explicit list of "measurementFunction" objects for scanning. The "simpleScanner" does not explicitly identify the network resource(s) it measures. Instead, this information is derived from the containment relationship between the selected "measurementFunction" instances and the objects that model the network resources, and, where necessary, through specific attributes of the "measurementFunction" objects that identify adjacent resources. In principle, a "simpleScanner" is able to scan attributes of any defined "measurementFunction", but for the purpose of the present document, each "simpleScanner" instance is only required to scan attributes of "measurementFunction" objects that are contained in the same "xxxFunction" object as the "simpleScanner" itself, where "xxx" stands for "bss", "msc", "hlr", "vlr", "eir" or "smsc", respectively (see figure C.1). All measurement attributes of any "measurementFunction" should only be read by a "simpleScanner" that has been instantiated for this purpose. By definition they can be read directly by systems management protocol, but their values are not expected to have any meaning apart from the scan. Therefore, the system will not return the "attribute list" in the create reply, and the "attributeList" will also not be included in the object creation notification.
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
4.2.1.2 Measurement schedule
|
The measurement schedule specifies the time frame during which the measurement job will be active. The schedule consist of a measurement start- and stoptime and one or more recording intervals which may repeat on a daily or weekly basis. The semantics of the scheduling parameters are described in subclause 3.2.1.2. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 35 (GSM 12.04 version 7.0.0 Release 1998) All of the above parameters are formally defined as attributes of conditional packages of the "simpleScanner" managed object class. The starttime and stoptime are included in the "duration" package and indicate, if the package is present, the specific point in time at which the "simpleScanner" will become active or inactive, respectively. If the "simpleScanner" is instantiated after the specified starttime, this will have the same effect as if no starttime was specified (see subclause 3.2.1.2). The optional recording intervals, if specified, further restrict the time during which the "simpleScanner" actively collects measurement data within the time frame determined by the duration package. The "dailyScheduling" package may be used to define one or more intervals during each day. Alternatively, the "weeklyScheduling" package can be used to define individual intervals for each day of the week. The recording interval should be a multiple of the granularity period (if non-zero) and the start- and endtimes shall be aligned with granularity period boundaries for the system to accept the values. It is possible to create several "simpleScanner" objects which scan the same attributes of the same "measurementFunction" instances according to different recording intervals. In this case it is, however, required that these intervals do not overlap. Consequently, if it is required to measure the same measurement type with overlapping schedules, it is necessary to have an appropriate number of instances of the same "measurementFunction" available which all support the required attributes (see subclause 4.2.1.1). For the definition of the syntactical and additional behavioural aspects of the above parameters, refer to CCITT Recommendation X.721 [14] and CCITT Recommendation X.738 [19].
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
4.2.1.3 Granularity period
|
The granularity period defines the periodicity of the generation of results by a measurement job within the timeframe specified in the scheduling attributes. The granularity period of a measurement job is determined by the value of the "granularityPeriod" attribute of the "simpleScanner". The present document requires, as a minimum, the support of granularity periods of 5, 15, 30 and 60 minutes. The value of this attribute shall specify the required value in minutes. The underlying International Standards allow the modification of the "granularityPeriod" attribute, but for an implementation claiming conformance to the present document, it is not required that its value be changeable during the lifetime of the "simpleScanner" object. If this value is 60, measurement results will be generated every full hour. If the value is 30, results will be generated every 0 and 30 minutes past the full hour. If the value is 15, result output will occur every 0, 15, 30 and 45 minutes past the full hour, and finally, if the value is 5, the "simpleScanner" will generate output every 5 minutes, synchronised on the full hour. Again, measurement results are only reported at the end of each granularity period within the recording interval. Due to these definitions, synchronisation of granularity periods through the conditional "periodSynchronisationPackage" of the "simpleScanner" is not supported in the scope of the present document. If periodical generation of results is not required from a "simpleScanner" instance, this can be achieved by specifying the value 0 for the "granularityPeriod" attribute. In this case, it will only be possible to request current measurement results from the "simpleScanner" (see below).
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
4.2.1.4 Scan reports
|
At the end of each granularity period within the measurement schedule, the "simpleScanner" will emit a "scanReport" notification, defined in CCITT Recommendation X.738 [19], which contains the measurement results generated by the scanner at the end of that granularity period. The information in the notification shall comprise: - the managed object class and managed object instance of the "simpleScanner" that emitted the notification, plus the notification type (i.e. "scan report"), - a time stamp that indicates the time at which the measurement results were taken, i.e. the end time of the respective granularity period, - for each "measurementFunction" object from which measurements were taken by the scanner, a list of measurement attribute values and optional attribute identifiers, plus a suspect flag for each attribute that indicates the validity of the result value. Missing data is indicated in the list. The time stamp that indicates the time offset forward from scan initiation until the value of the measurement attribute was actually taken is not supported in the PLMN measurement system, - for an incomplete scan the reason why the scan could not be completed. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 36 (GSM 12.04 version 7.0.0 Release 1998) The definition of the "scanReport" notification in CCITT Recommendation X.738 [19] provides some flexibility with respect to the actual layout of the report. In the PLMN performance measurement system, the following options can be selected: - suppressing the reporting of the identification of the "measurementFunction" object from which the measurements reported in the notification were collected. This is only useful when the identification of the "measuremntFunction" can be determined by other means, or if the identification is not required by the OS (e.g. when the statistics are to be calculated). - omitting the attribute identifiers from the report. In this case, the attribute values are reported in an agreed order, which is defined by an attribute of the "simpleScanner". - measurement values that are identical throughout all "mesurementFunction" instances from which the scanner takes measurements may be included in the report only once. CCITT Recommendation X.738 [19] defines in detail the attributes of the "simpleScanner" which are used to control the above features. Additional options of CCITT Recommendation X.738 [19] which are not listed here are not supported in the PLMN performance measurement system (see conformance requirements in subclause 4.4).
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
4.2.2 Scanner state and status attributes
|
State and status indicators are defined for the measurement job in subclause 3.2.2 of the present document. These are modelled through appropriate attributes which reflect the state and status of the "simpleScanner" object. These attributes are: administrativeState, operationalState and availabilityStatus. administrativeState: the administrativeState attribute is used to suspend and resume the scanning performed by the "simpleScanner". This attribute can be altered by means of CMISE M-SET service or SNMP SET operation for the applicable "simpleScanner" object instance. operationalState: The operationalState attribute represents the operational capability of the scanner to perform it's functions. availabilityStatus: The availabilityStatus attribute reflects whether or not the simpleScanner object instance is active according to the measurement schedule. Any changes to the values of the administrativeState and the operationalState attributes will be reported to the OS using the "stateChange" notification, as defined in CCITT Recommendation X.731 [16]. Further details about these attributes can be found in CCITT Recommendation X.738 [19].
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
4.2.3 Scanner administration
|
The generic CMISE services M-CREATE, M-DELETE, M-GET and M-SET or SNMP SET and GET, applied to a simpleScanner managed object instance respectively represent creation, deletion, display and modification of a measurement job. A CMISE M-ACTION primitive or SNMP SET with a specific action type for activating a scan report is defined for the retrieval of the current values of measurement results. Creating a "simpleScanner": A "simpleScanner" can be created by issuing an appropriate M-CREATE request or SNMP SET request. On creation of the object, all attribute values have to be supplied that determine: - the selection of "measurementFunction" instances and their attributes which shall be measured; - the schedule of the "simpleScanner"; and - the reporting requirements as defined in previous subclauses. The "measurementFunction" objects shall be created before the scanner can be instantiated, and the measurement attributes specified in the scanner shall be present in the selected "measurementFunction" instances, for the scan to return its results. For each object that does not exist, an empty report shall be returned and for each attribute that does not exist, an empty value shall be returned within the report. The relationship between the scan attributes and the scanner is explained in CCITT Recommendation X.738 [19]. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 37 (GSM 12.04 version 7.0.0 Release 1998) Modifying "simpleScanner" attributes: Modification of "simpleScanner" attributes may be requested by the OS during the lifetime of a scanner, using the CMISE M-SET or SNMP SET operation. The conditions for modification of attributes of the "simpleScanner" are specified in CCITT Recommendation X.738 [19] and CCITT Recommendation X.738 [19], but some additional restrictions, defined in the present document with respect to the changeability of "simpleScanner" attributes, apply in the PLMN performance measurement system. Displaying scanner objects: The system operator can get a list of all "simpleScanner" objects that currently exist in the system, together with all available information as stored in the NE. This information consists of the data that was supplied on creation/modification of the objects and the values of the state and status attributes of the "simpleScanner" objects. The CMISE M-GET or SNMP GET operation can be used to selectively retrieve the required information from the system. For details see CCITT Recommendation X.710 [13]. Deleting a "simpleScanner": A "simpleScanner" instance is automatically deleted by the system when the scheduled endtime is reached and all result reports, either scheduled or on request have been generated. A "simpleScanner" object can also be deleted by manual intervention, utilising the CMISE M-DELETE or SNMP SET operation, at any time. When deleted, the measurement process associated with the scanner is stopped, and all allocated resources are released. Suspending/resuming scanner operation: On normal operation, the "simpleScanner" collects measurement data from the selected "measurementFunction" objects according to the values of the "simpleScanner" attributes. However, the system operator may decide for some reason to discard temporarily the collection of measurement data (e.g. in case of system overload or congestion, measurement results not used, ...). The system operator therefore is able to suspend scanner operation at any time, setting the administrativeState attribute to "locked". This implies that the "simpleScanner" instance remains in the system, but no measurement gathering and result reporting activities are performed for this scanner. When scanner operation is resumed, i.e. the administrativeState is "unlocked", measurement data collection and result reporting is started again at the next full granularity period within the measurement schedule. Requesting current measurement result values: The system operator may for some reason be interested in the current values of the measurement results of a particular measurement process, independently of the scheduled data collection and reporting of the respective scanner, e.g. for tracing the increment of some of the measurement attributes. To this aim, the "activateScanReport" CMISE M-ACTION or SNMP GET is used as defined in CCITT Recommendation X.738 [19]. The action reply will return current results according to the attributes of the scanner that govern the generation of the "scanReport" notification, i.e. the format of the reply is identical to that of scheduled reports generated by the scanner. Any such request does not affect the underlying measurement process, and may only be issued when the scanner is operating according to its schedule and not suspended (i.e. "offduty" not present in the availability status , administrative state equals "unlocked"), otherwise an error will be returned.
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
4.3 Modelling of measurement results
|
Each measurement produces a result at the end of the granularity period or on request of the OS. Annex B provides for each measurement type a description of the expected measurement result. Annex C contains the formal definition of the attribute that represents the measurement type.
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
4.3.1 Characteristics of the result report
|
A scheduled result report is generated in the form of a "scanReport" notification. Current measurement results requested by the OS using the "activateScanReport" action will be supplied by the system in the reply to the request. All measurement attributes that are observed by a "simpleScanner" object are included in a single report or action reply, respectively. The layout of the two result reports - notification or action reply - is identical, as far as the contained measurement information is concerned. For details on the result report characteristics, please refer to the previous subclauses.
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
4.3.2 Result report transfer control
|
Result reports from a "simpleScanner" object are either produced according to the measurement schedule (notification) or on receipt of an explicit request (action) from the OS. There are no mechanisms to control the forwarding of the reply to that request (action reply), or to store it in the NE. There are, however, functions to determine the forwarding, local storage in the NE and deferred retrieval of the "scanReport" notification. These functions are described in the following paragraphs. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 38 (GSM 12.04 version 7.0.0 Release 1998) The forwarding of notifications can be controlled by the OS via "Event Forwarding Discriminator" (EFD) objects, as defined in CCITT Recommendation X.734 [17]. For each EFD, the OS can specify a discriminator construct which will be applied as a filter to any event report generated in the system. If an event report passes the filter, a notification will be forwarded to the OS accordingly. The following filter criteria are allowed in an EFD for the PLMN performance measurement system: - the event type, which allows to enable or disable completely the forwarding of scan report notifications; - the "simpleScanner" managed object instance, which allows to restrict forwarding of result reports to those that are generated by specific scanner instances; - the time stamp contained in the scan report ("scanInitiationTime"), which allows to selectively enable the forwarding of result reports that were generated at a specific time or during specific periods of time; - any operation on the above attributes in any combination. Measurement result reports can be stored in the NE. This property is modelled through the managed object class "log", as specified in CCITT Recommendation X.721 [14] and "log control function" as specified in CCITT Recommendation X.735 [18]. The storage of event reports in the "log" can be controlled through a discriminator construct, similar to the event forwarding control. The present document requires for the "log" discriminator construct the same criteria as for the EFD discriminator construct. All scan report notifications that pass the discriminator construct of the "log" will create a "scanReportRecord" object which is contained in the log. These records can be retrieved by the OS at any time, as defined in CCITT Recommendation X.735 [18] and CCITT Recommendation X.710 [13], using either CMISE, SNMP, FTP or using FTAM (see annex D). The use of FTAM or FTP services is especially suitable for bulk data transfer. From the common procedures defined in GSM TS 12.00 [8] for data transfer in a PLMN, only the method that provides logged information into file(s) can be used for the measurement system. The "resultType" requested in the action will identify the appropriate log instance(s) as the source of the measurement data, and optionally additional filter criteria which determines the actual records to be put into the file(s) can be supplied. The filter criteria that shall be supported are identical to those defined for the discriminator construct of the logs. On receipt of the action, the requested records will be put into one or more files, which will then be made available to the OS. The format of the records in the file shall be according to the definition of the "scanReportRecord" as given in CCITT Recommendation X.738 [19]. Since all measurement attributes and the identification of the network resource observed by a "simpleScanner" are included in a single attribute of the result reports, it is not possible to filter on the measured resource or the measurement type. If the selective forwarding/logging/retrieval of measurement results referring to individual network resources or individual measurement types is required by the system operator, then "simpleScanner" objects shall be instantiated such that the scanner identity will implicitly identify the measured resource and measurement types, i.e. the scanner attributes should be set such that the scanner observes only the specific resources and/or the specific measurement attributes which shall be filtered, according to the system operator's requirements.
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
4.4 Conformance requirements
|
In the following subclause, conformance requirements for object classes, notifications and actions defined in CCITT Recommendation X.738 [19] are specified. In cases where requirements in the present document restrict options of CCITT Recommendation X.738 [19], like e.g. changeability of attribute values, the conditions of the present document shall apply.
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
4.4.1 Simple scanner
|
The following subclause lists the attributes and packages of the "simpleScanner", as defined in CCITT Recommendation X.738 [19], and those inherited from the "scanner" as defined in CCITT Recommendation X.738 [19]. It specifies which properties shall be supported to conform with the present document. MANDATORY PACKAGES: scannerPackage scannerId: this attribute identifies a "simpleScanner" instance. It is a mandatory attribute of the "simpleScanner" managed object class and will be supported in the PLMN measurement system. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 39 (GSM 12.04 version 7.0.0 Release 1998) granularityPeriod: this attribute specifies the granularity period of the scanner, as defined in subclause 4.2.1.3. It is a mandatory attribute of the "simpleScanner" managed object class and will be supported in the PLMN measurement system. administrativeState and operationalState: (see subclause 4.2.2) are mandatory attributes of the "simpleScanner" managed object class and will be supported in the PLMN measurement system. Their semantics are defined in CCITT Recommendation X.738 [19]. homogeneousScannerPackage scanAttributeIdList: this attribute is interrelated with the "numericAttributeIdArray" attribute of the "simpleScannerPackage". It is supported in the PLMN measurement system according to the definitions of subclause 4.2.1.4 and CCITT Recommendation X.738 [19]. simpleScannerPackage numericAtributeIdArray: this attribute is interrelated with the "scanAttributeIdList" attribute of the "homogeneousScannerPackage". It is supported in the PLMN measurement system according to the definitions of subclause 4.2.1.4 and CCITT Recommendation X.738 [19]. suppressObjectInstance: this attribute determines whether or not the object instance of the observed measurement function is included in the measurement results. It is supported in the PLMN measurement system according to the definitions of subclause 4.2.1.4 and CCITT Recommendation X.738 [19]. activateScanReport: this action is supported in the PLMN measurement system (see below). scanReport: this notification is supported in the PLMN measurement system (see below). CONDITIONAL PACKAGES: availabilityStatusPackage availabilityStatus: this attribute is supported in the PLMN measurement system (see subclause 4.2.2) according to the definition of CCITT Recommendation X.738 [19]. duration startTime and stopTime: these attributes constitute the start- and stoptime of the scanner. They are supported according to subclause 4.2.1.2 and CCITT Recommendation X.738 [19]. dailyScheduling intervalsOfDay: this attribute defines the periods within a day during which the scanner actively collects measurement data. It is supported according to subclause 4.2.1.2 and CCITT Recommendation X.738 [19]. weeklyScheduling weekMask: this attribute defines, for each day of the week, the periods during which the scanner actively collects measurement data. It is supported according to subclause 4.2.1.2 and CCITT Recommendation X.738 [19]. externalScheduler The support of this package is not required in the PLMN measurement system. periodSynchronisationPackage The support of this package is not required in the PLMN measurement system. Synchronisation of granularity periods is described in subclause 4.2.1.3. createDeleteNotificationsPackage This package contains the object creation and object deletion notifications. Both are required in the PLMN measurement system. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 40 (GSM 12.04 version 7.0.0 Release 1998) attributeValueChangeNotificationPackage This package contains the attribute value change notification. It is required in the PLMN measurement system. stateChangeNotificationPackage This package contains the state change notification. It is required in the PLMN measurement system. timeStampReportPackage timeStampReportMode: this attribute specifies the time stamping requirements for the measurement results. The value "1" ("globalTimeStampOnly") shall be used. scopedSelectionPackage and managedObjectInstanceSelectionPackage Either one of these packages is present in any scanner instance. The attributes contained in the packages determine the measurement functions selected for observation by the scanner. They are supported according to the definitions of CCITT Recommendation X.738 [19]. timingSelectionPackage The support of this package is not applicable in the PLMN measurement system, since the observed "measurementFunction" managed objects do not contain any time attributes. onceReportAttributeIdListPackage onceReportAttributeIdList: this attribute contains a list of attribute identifiers. The values of these attributes shall be included in a result report only once if they are identical throughout all "measurementFunction" objects observed by the "simpleScanner". It may be supported in the PLMN measurement system as an option, see CCITT Recommendation X.738 [19].
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
4.4.2 Scan report record
|
The "scanReportRecord" managed object class will be supported in the PLMN measurement system as defined in CCITT Recommendation X.738 [19] and CCITT Recommendation X.721 [14].
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
4.4.3 Scan report notification
|
The "scanReport" notification will be supported in the PLMN measurement system as defined in subclause 4.2.1.4 and CCITT Recommendation X.738 [19].
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
4.4.4 Activate scan report action
|
In the scope of the present document, there are no specific conformance requirements for the action request. The action reply will be supported according to the requirements for the scan report notification.
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
4.5 Application Context
|
The Application Context Name of the 12.04 application context shall have the following object identifier value: {gsm-OM-DomainId gsm-12-04 (4) protocolSupport (1) applicationContext (0) gsm-Management (0)} and the following object description value: "gsm12.04 management application context" The object identifier gsm-OM-DomainId is defined in the GSM 12.30 (ETR 128) [11]. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 41 (GSM 12.04 version 7.0.0 Release 1998)
|
cdfbc793b22dba975ca2a8fa9f7f80c7
|
100 615
|
5 Future Enhancements
|
The simple scanner can scan an attribute, but is unable to perform any calculations on it. This means that the simple scanner is unable to apply any algorithm on any attribute to derive a master value, e.g. a calculation of the mean value. Therefore, within the present document, an approach has been chosen where the attribute itself represents a mean value, derived from system internal sampling procedures, if generation of a mean value is desired. As a result, the values of such attributes are only meaningful at the time of scanning, so that the scanner and the measurement process that generates the attribute value shall be synchronised. How this synchronisation and the generation of processed attributes is achieved is a matter of internal implementation. The situation described above will also prohibit that a single attribute be observed by more than one scanner if the reporting periods of the scanners overlap and contain different granularity periods. If it is required to have multiple scanners generating results for the same measurement type simultaneously, it is necessary to create multiple instances of the same "measurementFunction" that includes the attribute which corresponds to the required measurement type. In practical terms, this means that a measurement has to be implemented more than once in a NE if this feature is supported. In order to circumvene this problem, a change has been proposed to ISO 10165-13 to incorporate a new scanner object class which will be based on simple counter-type measurements only and allow to attach any desired algorithm in order to process the attribute values and report the result of that processing, e.g. evaluating the mean over the observed values. Pending future extensions of the international standard, this may eventually lead to associated changes to the present document (subject of Phase 2+). ETSI ETSI TS 100 615 V7.0.0 (2000-02) 42 (GSM 12.04 version 7.0.0 Release 1998) Annex A (informative): Graphical examples This annex gives some graphical examples to demonstrate how the measurements in annex B, can be combined to express a specific function. EXAMPLE 1: Authentication and Authentication Set requests. This diagram shows which measurements in the annex B need to be activated to collect the statistical information for Authentication of a subscriber. HLR VLR MSC BSC 2 5 1 4 3 6 12 11 10 9 8 7 PVLR EXAMPLE 1: Authentication and Authentication Set requests Nbr. Measurement Attribute Name Measurement Name 1 attReqForAuthSetsReceivedByHLRFromVLRs Attempted requests for Authentication sets received by HLR from VLRs 2 succReturnedAuthSetsFromHLRToVLRs Successful returned Authentication sets from HLR to VLRs 3 emptyResponsesForAuthSetsFromHLRToVLRs Empty responses to request for Authentication sets from HLR to VLRs 4 attReqForAuthSetsSentToHLR Attempted requests for Authentication sets sent to HLR by the VLRs 5 succReceivedAuthSetsFromHLR Successful received Authentication sets from the HLR to the VLRs 6 emptyResponsesForAuthFromHLR Empty responses to request for Authentication sets from HLR to VLRs 7 attIdentificationReqToPVLRs Attempted identification requests to PVLRs 8 succIdentificationReqToPVLRs Successful identification requests to PVLRs 9 attCipheringModeControlProcs Attempted ciphering mode controlled procedures 10 succCipheringModeControlProcs Successful ciphering mode controlled procedures 11 attAuthProcsInVLR Attempted authentication procedures in the VLR 12 succAuthProcsInVLR Successful authentication procedures in the VLR EXAMPLE 2: Interrogation of HLR for routing. This diagram shows which measurements in the annex B need to be activated to collect the statistical information for Routing. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 43 (GSM 12.04 version 7.0.0 Release 1998) HLR VLR MSC 3 1 4 5 2 Example 2: Interrogation of HLR for routing Nbr. Measurement Attribute Name Measurement Name 1 attInterrogationOfHLRsForRouting Attempted interrogations of HLRs for routing 2 attReqForMSRN Attempted request for MSRN 3 succReqForMSRN Successful request for MSRN 4 succInterrogationOfHLRsMSRNObtained Successful interrogations of HLR (MSRN obtained) 5 succInterrogationOfHLRsCallForwarding Successful interrogations of HLR (call forwarding) EXAMPLE 3: Location Updating. This diagram shows which measurements in the annex B need to be activated to collect the statistical information for Location Updating. HLR VLR MSC 5 6 1 2 3 4 EXAMPLE 3: Location Updating Nbr. Measurement Attribute Name Measurement Name 1 attIntraVLRLocationUpdates Attempted intra-VLR location updates 2 succIntraVLRLocationUpdates Successful intra-VLR location updates 3 attInterVLRLocationUpdates Attempted inter-VLR location updates 4 succInterVLRLocationUpdates Successful inter-VLR location updates 5 attLocationUpdate Attempted location updates 6 succLocationUpdate Successful location updates ETSI ETSI TS 100 615 V7.0.0 (2000-02) 44 (GSM 12.04 version 7.0.0 Release 1998) Annex B (normative): Performance Measurement Requirements Summary Following is the template used to describe the measurements contained in this annex. A. Description A short explanation of the measurement operation. B. Collection Method The form in which this measurement data is obtained: - CC (Cumulative Counter); - GAUGE (dynamic variable), used when data being measured can vary up or down during the period of measurement; - DER (Discrete Event Registration), when data related to a particular event are captured every nth event is registered, where n can be 1 or larger; - SI (Status Inspection). C. Condition The GSM condition which causes this measurement data to be updated. Where it is not possible to give a precise GSM condition, then the conditional circumstances leading to the update is stated. D. Measurement Attribute Name The Measurement Attribute Name which will be referenced by the Object Model. E. Measurement Result (measured value, Unit) A short description of expected result value (e.g. A single integer value). F. Measurement Function Name Measurement Function Name for which this measurement is defined. G. Switching Technology The Switching product this Measurement is applicable to. Circuit Switched and / or Packet Switched ( GPRS ). When packet switching (GPRS) is identified for an MSC measurement function, this measurement type is related to a combined circuit/packet switched event. B.1 Measurements Related To The BSC B.1.1 BSC Measurement Function B.1.1.1 Unsuccessful requests for service A. This measurement provides the number of unsuccessful mobile originated services for the BSC. Note, the "reject cause" indicates why the service request was rejected. Possible causes include, B-Subscriber busy, network out of order, protocol errors. B. CC. C. Transmission of "CM-SERVICE REJECT" Message to MS requesting service (GSM 04.08 [2]). ETSI ETSI TS 100 615 V7.0.0 (2000-02) 45 (GSM 12.04 version 7.0.0 Release 1998) D. unsuccReqsForService. E. A single integer value. F. BSC Measurement Function. G. Valid for circuit switching. B.1.1.2 Unsuccessful requests for service, per cause A. This measurement provides the number of unsuccessful mobile originated services for the BSC per cause. Note, the "reject cause" indicates why the service request was rejected. Possible causes include, B-Subscriber busy, network out of order, protocol errors. B. CC. C. Transmission of "CM-SERVICE REJECT" Message to MS requesting service (GSM 04.08 [2]). D. unsuccReqsForServicePerCause. E. An integer value per cause. F. BSC Measurement Function. G. Valid for circuit switching. B.1.1.3 Mean Inter-arrival Time ( Circuit Switched ) A. This measurement provides the arithmetic mean of the sum of time intervals between consecutive mobile originating call attempts. B. CC. C. This measurement is obtained by accumulating the time segments between receipt of consecutive access Message on the RACH with establishment cause "MOBILE ORIGINATING CALL" and then taking the arithmetic mean (GSM 04.08 [2]). D. meanInterArrivalTime E. A single real value. F. BSC Measurement Function. G. Valid for circuit switching. B.1.1.4 Attempted Transmission of Paging Messages, per BSC A. This measurement provides the number of Paging messages transmitted, on a per BSC basis (these are counted as attempts). B. CC. C. Transmission of "PAGING REQUEST" (GSM 04.08 [2]). D. attTransOfPagingMessagesPerBSC. E. A single integer value. F. BSC Measurement Function. G. Valid for circuit and packet switching. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 46 (GSM 12.04 version 7.0.0 Release 1998) B.1.1.5 Unsuccessful Transmission of Paging Messages, per BSC A. This measurement provides the number of unsuccessful Paging requests, on a per BSC basis. B. CC. C. No "PAGING RESPONSE" received for the "PAGING REQUEST", expiry of timer T3113 (GSM 04.08 [2]). D. unsuccTransOfPagingMessagesPerBSC. E. A single integer value. F. BSC Measurement Function. G. Valid for circuit and packet switching. B.1.1.6 Attempted IMMEDIATE ASSIGNMENT Procedures, per BSC A. This measurement provides the number of attempted immediate assignment procedures, on a per BSC basis. B. CC. C. Receipt of "CHANNEL REQUEST" Message. Note, the establishment causes are: "EMERGENCY CALL", "CALL RE-ESTABLISHMENT", "ANSWER TO PAGING", "ORIGINATING CALL" , "LOCATION UPDATING", "ONE PHASE PACKET ACCESS", "SINGLE BLOCK PACKET ACCESS" and "OTHER PROCEDURES" as defined in (GSM 04.08 [2]). D. attImmediateAssingProcsPerBSC. E. A single integer value. F. BSC Measurement Function. G. Valid for circuit and packet switching. B.1.1.7 Successful IMMEDIATE ASSIGNMENT Procedures, per BSC A. This measurement provides the number of successful immediate assignment procedures, on a per BSC basis. B. CC. C. Transmission of "IMMEDIATE ASSIGN COMMAND" Message. This Message contains either an "IMMEDIATE ASSIGNMENT" Message or an "IMMEDIATE ASSIGNMENT EXTENDED" Message. If an "IMMEDIATE ASSIGNMENT EXTENDED" Message is transmitted, the counter shall be incremented by two, because that Message contains assignment information for two mobiles (GSM 04.08 [2]). D. succImmediateAssingProcsPerBSC. E. A single integer value. F. BSC Measurement Function. G. Valid for circuit and packet switching. B.1.1.8 Successful Internal Handovers, intra-CELL, per BSC A. This measurement provides the number of times a call moves from the occupied channel of the CELL to another free channel of the same CELL, on a per BSC basis. B. CC. C. Transmission of a "HANDOVER PERFORMED" Message to the MSC (GSM 08.08 [5]). ETSI ETSI TS 100 615 V7.0.0 (2000-02) 47 (GSM 12.04 version 7.0.0 Release 1998) D. succInternalHDOsIntraCellPerBSC. E. A single integer value. F. BSC Measurement Function. G. Valid for circuit switching. B.1.1.9 Unsuccessful Internal Handovers, intra-CELL, per BSC A. This measurement provides the number of unsuccessful intra CELL Handovers, i.e. an attempt was made to move a call .from the occupied channel of the CELL to another free channel of the same CELL, on a per BSC basis. B. CC. C. Receipt of "ASSIGNMENT FAILURE" Message for the attempted handover (GSM 04.08 [2]). D. unsuccInternalHDOsIntraCellPerBSC. E. A single integer value. F. BSC Measurement Function. G. Valid for circuit switching. B.1.1.10 Successful Internal Handovers per BSC A. This measurement provides the number of successful Handovers on a per BSC basis, it includes intra-CELL as well as inter-CELL Handovers. B. CC. C. Transmission of a "HANDOVER PERFORMED" Message to the MSC (GSM 08.08 [5]). D. succInternalHDOsPerBSC. E. A single integer value. F. BSC Measurement Function. G. Valid for circuit switching. B.1.1.11 Successful Internal Handovers per cause A. This measurement provides the number of successful Handovers per cause, it includes intra-CELL as well as inter-CELL Handovers. B. CC. C. Transmission of a "HANDOVER PERFORMED" Message to the MSC (GSM 08.08 [5]). D. succInternalHDOsPerCause. E. An integer value per Handover cause. F. BSC Measurement Function. G. Valid for circuit switching. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 48 (GSM 12.04 version 7.0.0 Release 1998) B.1.1.12 Unsuccessful Internal Handovers with reconnection to old channels, per BSC A. This measurement provides the number of unsuccessful Handovers, on a per BSC basis (with reconnection to the original channels). B. CC. C. Receipt of "HANDOVER FAILURE" Message for the attempted handover (GSM 04.08 [2]). D. unsuccInternalHDOsWithReconnectionPerBSC. E. A single integer value. F. BSC Measurement Function. G. Valid for circuit switching. B.1.1.13 Unsuccessful Internal Handovers with loss of connection, per BSC A. This measurement provides the number of unsuccessful Handovers that end in loosing the call, on a per BSC basis. B. CC. C. Expiry of timer T3103 for Inter CELL Handovers and Expiry of timer T3107 for Intra CELL Handovers (GSM 04.08 [2]). D. unsuccInternalHDOsWithLossOfConnectionPerBSC. E. A single integer value. F. BSC Measurement Function. G. Valid for circuit switching. B.1.1.14 Flush Requests Received A. This measurement provides the total number of flush request messages received from the SGSN to flush the PDUs for a given cell. B. CC. C. Update count for each receipt of a PDU flush request message from the SGSN. D. flushReqReceived. E. A single integer value. F. BSC Measurement Function. G. Valid for packet switching. B.1.1.15 Paging Requests Received from SGSN A. This measurement provides the total number of "PAGING" messages received by the BSS from the SGSN. B. CC. C. Update count for each receipt of a "PAGING" message by the BSS from the SGSN. D. pagingReqReceivedfromSGSN. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 49 (GSM 12.04 version 7.0.0 Release 1998) E. A single integer value. F. BSC Measurement Function. G. Valid for packet switching. B.1.1.16 Mean Inter-arrival Time ( Packet Switched ) A. This measurement provides the arithmetic mean of the sum of time intervals between consecutive mobile originating packet channel access request . B. CC. C. This measurement is obtained by accumulating the time segments between receipt of consecutive 'PACKET CHANNEL REQUEST' message with the establishment cause being either one phase packet access or single block packet access, on the PRACH and then taking the arithmetic mean GSM 04.60 [23]. D. meanPSInterArrivalTime E. A single real value. F. BSC Measurement Function. G. Valid for packet switching. B.2 Measurements related to the BTS B.2.1 CELL Measurement Function B.2.1.1 Mean PCH-AGCH queue length A. This measurement provides the arithmetic mean of the number of all messages waiting for transmission on the PCH-AGCH. Note: this is valid for circuit only when a PCCCH is provided. B. SI. C. This measurement is obtained by sampling at a pre-defined interval (System designed), the PCH-AGCH queue length and then taking the arithmetic mean (GSM 04.08 [2]). D. meanPCHAGCHQueueLength. E. A single real value. F. CELL Measurement Function. G. Valid for circuit and packet switching. B.2.1.2 Attempted Transmission of Paging Messages (the PCH) A. This measurement provides the number of Paging messages transmitted (these are counted as attempts). Note: this is valid for circuit only when a PCCCH is provided. B. CC. C. Transmission of "PAGING REQUEST" (GSM 04.08 [2]). D. attTransOfPagingMessagesThePCH. E. A single integer value. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 50 (GSM 12.04 version 7.0.0 Release 1998) F. CELL Measurement Function. G. Valid for circuit and packet switching. B.2.1.3 Unsuccessful Transmission of Paging Messages (the PCH) A. This measurement provides the number of unsuccessful Paging requests . B. CC. C. No "PAGING RESPONSE" received for the "PAGING REQUEST", expiry of timer T3113 (GSM 04.08 [2]). Note: this is valid for circuit only when a PCCCH is provided. D. unsuccTransOfPagingMessagesThePCH. E. A single integer value. F. CELL Measurement Function. G. Valid for circuit and packet switching. B.2.1.4 Attempted IMMEDIATE ASSIGNMENT Procedures A. This measurement provides the number of attempted immediate assignment procedures. B. CC. C. Receipt of "CHANNEL REQUIRED" Message. Note, the establishment causes are: "EMERGENCY CALL", "CALL RE-ESTABLISHMENT", "ANSWER TO PAGING", "ORIGINATING CALL" , "LOCATION UPDATING", "ONE PHASE PACKET ACCESS", "SINGLE BLOCK PACKET ACCESS" and and "OTHER PROCEDURES" as defined in (GSM 04.08 [2]). D. attImmediateAssingProcs. E. A single integer value. F. CELL Measurement Function. G. Valid for circuit and packet switching. B.2.1.5 Successful IMMEDIATE ASSIGNMENT Procedures A. This measurement provides the number of successful immediate assignment procedures. B. CC. C. Transmission of "IMMEDIATE ASSIGN COMMAND" Message. This message contains either an "IMMEDIATE ASSIGNMENT" Message or an "IMMEDIATE ASSIGNMENT EXTENDED" Message. If an "IMMEDIATE ASSIGNMENT EXTENDED" Message is transmitted, the counter shall be incremented by two, because that Message contains assignment information for two mobiles (GSM 04.08 [2]). D. succImmediateAssingProcs. E. A single integer value. F. CELL Measurement Function. G. Valid for circuit and packet switching. B.2.1.6 Attempted IMMEDIATE ASSIGNMENT Procedures, per cause A. This measurement provides the number of attempted immediate assignment procedures, per cause. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 51 (GSM 12.04 version 7.0.0 Release 1998) B. CC. C. Receipt of "CHANNEL REQUIRED" Message. Note, the establishment causes are: "EMERGENCY CALL", "CALL RE-ESTABLISHMENT", "ANSWER TO PAGING", "ORIGINATING CALL" , "LOCATION UPDATING" and "OTHER PROCEDURES" as defined in (GSM 04.08 [2]). NOTE: System implementation will allow the establishments causes of PS *** Att IMM ASS Poc can be incorporated in this measurement. F. attImmediateAssingProcsPerCause. G. An integer value per cause. H. CELL Measurement Function. I. Valid for circuit and packet switching. B.2.1.7 Successful IMMEDIATE ASSIGNMENT Procedures, per cause A. This measurement provides the number of successful immediate assignment procedures, per cause. B. CC. C. Transmission of "IMMEDIATE ASSIGN COMMAND" Message. This Message contains either an "IMMEDIATE ASSIGNMENT" Message or an "IMMEDIATE ASSIGNMENT EXTENDED" Message, per cause. Note, the establishment causes are: "EMERGENCY CALL", "CALL RE-ESTABLISHMENT", "ANSWER TO PAGING", "ORIGINATING CALL" , "LOCATION UPDATING" and "OTHER PROCEDURES". The "IMMEDIATE ASSIGNMENT EXTENDED" Message contains assignment information for two mobiles (GSM 04.08 [2]). If the establishment cause is identical for the the two mobile stations, the counter shall be incremented by two. Otherwise the affected counters shall be incremented by one. NOTE: System implementation will allow the establishments causes of PS *** Att IMM ASS Poc can be incorporated in this measurement. D. succImmediateAssingProcsPerCause. E. An integer value per cause. F. CELL Measurement Function. G. Valid for circuit and packet switching. B.2.1.8 Number of Pages Discarded from the PCH Queue A. This measurement provides the number of Paging messages which are discarded from the PCH queue before they could be transmitted . B. CC. C. Pages can be discarded from the queues (assuming queuing is in operation) for a number of reasons, including queue overflow, priority insertion in the queue causing an overflow and in-queue timer expiry (GSM 04.08 [2]). Note: this is valid for circuit only when a PCCCH is provided. D. nbrOfPagesDiscardedFromPCHQueue. E. An integer value for the paging queue in the CELL. F. CELL Measurement Function. G. Valid for circuit and packet switching. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 52 (GSM 12.04 version 7.0.0 Release 1998) B.2.1.9 Mean duration of a successful Paging Procedure A. This measurement provides the arithmetic mean duration of a successful Paging procedure, i.e. from transmission of the page request towards the MS and receipt of a positive response. B. CC. C. An accumulation is performed for the time taken by each Paging procedure during the granularity period and an arithmetic mean is taken from the observed values. The measured time will be between Transmission of a "PAGING REQUEST" service request to Receipt of "PAGING RESPONSE" service confirmation (GSM 04.08 [2]). D. meanDurationOfSuccPagingProcs. E. A single real value. F. CELL Measurement Function. G. Valid for circuit and packet switching. B.2.1.10 Number of Time Slots Available for Traffic ( Prevoiusly TCHs) A. This measurement provides the number of TS which are available for use by either CS or PS traffic(including those which are actually in use). B. GAUGE. C. The gauge will be incremented when the TS becomes available and decremented when it becomes unavailable. The TS is available when its administrative state is "unlocked" or "shuttingdown" and the operational state is "enabled", and is unavailable when its administrative state changes to "locked" or operational state changes to "disabled". The gauge value equals the number of TS with an administrative state of "unlocked" or "shuttingdown" and an operational state of "enabled", (GSM 04.08 [2]). D. nbrOfAvailableTCHs. E. A single integer value. F. CELL Measurement Function. G. Valid for circuit and packet switching. B.2.1.11 Mean number of busy Time Slots Occupied by Circuit Traffic A. This measurement provides the arithmetic mean number of TS which are simultaneously in use for CS traffic (TCHs). B. SI. C. This measurement is obtained by sampling at a pre-defined interval (System designed), the number of TS which are carrying circuit traffic (TCHs) and then taking the arithmetic mean (GSM 04.08 [2]). D. meanNbrOfBusyTCHs. E. A single real value. F. CELL Measurement Function. G. Valid for circuit switching. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 53 (GSM 12.04 version 7.0.0 Release 1998) B.2.1.12 Maximum number of busy Time Slots Occupied by Circuit Traffic A. This measurement provides the highest recorded value for the number of TS simultaneously in use for Circuit switched traffic. B. GAUGE. C. This measurement is obtained by sampling at a pre-defined interval (System designed), the number of TSs which are "busy", and then taking the maximum of all such values at the end of the granularity period. A TS is busy between an "ASSIGNMENT COMPLETE" Message and the complementary "RELEASE" Message, (GSM 04.08 [2]). D. maxNbrOfBusyTCHs. E. A single integer value. F. CELL Measurement Function. G. Valid for circuit switching. B.2.1.13 Mean number of idle Time Slots per interference band ( Previously TCHs) A. This measurement provides the arithmetic mean of the number of idle TS per interference band. The TS is said to be idle if it can be allocated for a request. Idle TS are allocated in five classes (GSM 05.01) depending on the measured interference level. B. SI. C. This measurement is obtained by sampling at a pre-defined interval (System designed), the number of idle TS per interference band and then taking the arithmetic mean (GSM 04.08 [2]). D. meanNbrOfIdleTCHsPerInterferenceBand. E. A real value per interference band. F. CELL Measurement Function. G. Valid for circuit and packet switching. B.2.1.14 Attempted Time Slots seizures (Previously TCHs) A. This measurement provides the number of attempted TS seizures. B. CC. C. Transmission of "ASSIGNMENT COMMAND" Message to the MS, (GSM 04.08 [2]). D. attTCHSeizures. E. A single integer value. F. CELL Measurement Function. G. Valid for circuit and packet switching. B.2.1.15 Successful TCH/PDTCH seizures ( Previously TCHs) A. This measurement provides the number of successful TCH/PDTCH seizures. B. CC. C. Receipt of "ASSIGNMENT COMPLETE" Message from the MS, (GSM 04.08 [2]). ETSI ETSI TS 100 615 V7.0.0 (2000-02) 54 (GSM 12.04 version 7.0.0 Release 1998) D. succTCHSeizures. E. A single integer value. F. CELL Measurement Function. G. Valid for circuit and packet switching. B.2.1.16 Attempted TCH Seizures meeting an TCH blocked state A. This measurement provides the number of attempted TCH seizures meeting all busy TCH state. B. CC. C. Receipt of "SETUP" Message from the MS meeting all TCH busy state (GSM 04.08 [2]). D. attTCHSeizuresMeetingTCHBlockedState. E. A single integer value. F. CELL Measurement Function. G. Valid for circuit switching. B.2.1.17 All Available TCH Allocated Time A. This measurement provides the accumulated time during the granularity period when all available Time slots available for CS traffic were in use or otherwise unavailable to be allocated. B. CC. C. Each time segment represents the elapsed time from the last available TS being allocated to the next occurrence of a release of a TCH, so making it available for allocation. The allocation event can be for any reason e.g. new call, Handover and is represented by an "ASSIGNMENT COMPLETE" Message. These time segments are accumulated to give a single total (GSM 04.08 [2]). D. allAvailableTCHAllocatedTime. E. A single real value. F. CELL Measurement Function. G. Valid for circuit switching. B.2.1.18 Mean busy time of allocated CS Time Slots A. This measurement provides the arithmetic mean of the busy time of the maximum number of Time slots allocated for CS TCHs in a CELL,. B. SI. C. This measurement is obtained by accumulating each Timeslots busy time. A TS is considered busy when it carries one or more TCHs, i.e. between an "ASSIGNMENT COMPLETE" Message and the complementary "RELEASE" Message for those TCHs. All values are added up and divided by the number of TS (maximum allocated for circuit on this Cell) at the end of the granularity period to obtain the arithmetic mean. (Further information can be found in GSM 04.08 [2]). D. meanTCHBusyTime. E. A single real value F. CELL Measurement Function. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 55 (GSM 12.04 version 7.0.0 Release 1998) G. Valid for circuit switching. B.2.1.19 Mean TCH queue length A. This measurement provides the arithmetic mean of the number of queued TCH assignment procedures. B. SI. C. This measurement is obtained by sampling at a pre-defined interval (System designed), the TCH queue length and then taking the arithmetic mean (GSM 04.08 [2]). D. meanTCHQueueLength. E. A single real value. F. CELL Measurement Function. G. Valid for circuit switching. B.2.1.20 Number of lost Radio links while using a TCH A. This measurement provides the number of calls terminated due to RF failure on the radio path. B. CC. C. A local end release due to a "RADIO LINK FAILURE" experienced by the BTS when using a TCH (GSM 05.08 [4]). D. nbrOfLostRadioLinksTCH. E. A single integer value. F. CELL Measurement Function. G. Valid for circuit switching. B.2.1.21 Number of Available SDCCHs A. This measurement provides the number of SDCCHs which are available to be used (including those actually in use). B. GAUGE. C. The gauge will be incremented when the SDCCH becomes available and decremented when it becomes unavailable. The SDCCH is available when its administrative state is "unlocked" or "shuttingdown" and the operational state is "enabled", and is unavailable when its administrative state changes to "locked" or operational state changes to "disabled". The gauge value equals the number of SDCCHs with an administrative state of "unlocked" or "shuttingdown" and an operational state of "enabled", (GSM 04.08 [2]). D. nbrOfAvailableSDCCHs. E. A single integer value. F. CELL Measurement Function. G. Valid for circuit switching. B.2.1.22 Mean number of busy SDCCHs A. This measurement provides the arithmetic mean of the number of SDCCHs which are simultaneously in use. B. SI. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 56 (GSM 12.04 version 7.0.0 Release 1998) C. This measurement is obtained by sampling at a pre-defined interval (System designed), the SDCCHs which are busy and then taking the arithmetic mean (GSM 04.08 [2]). D. meanNbrOfBusySDCCHs. E. A single real value. F. CELL Measurement Function. G. Valid for circuit switching. B.2.1.23 Maximum number of busy SDCCHs A. This measurement provides the highest recorded value for the number of SDCCHs simultaneously in use. B. GAUGE. C. This measurement is obtained by sampling at a pre-defined interval (System designed), the number of SDCCHs which are "busy", and then taking the maximum of all such values at the end of the granularity period, (GSM 04.08 [2]). D. maxNbrOfBusySDCCHs. E. A single integer value. F. CELL Measurement Function. G. Valid for circuit switching. B.2.1.24 Attempted SDCCH Seizures meeting an SDCCH blocked state A. This measurement provides the number of attempted SDCCH seizures meeting all busy SDCCH state. B. CC. C. Receipt of "CHANNEL REQUEST" Message from the MS sent on the RACH meeting all SDCCH busy state (GSM 04.08 [2]). D. attSDCCHSeizuresMeetingSDCCHBlockedState. E. A single integer value. F. CELL Measurement Function. G. Valid for circuit switching. B.2.1.25 All Available SDCCH Allocated Time A. This measurement provides the accumulated time during the granularity period when all available SDCCHs are in use or otherwise unavailable to be allocated. B. CC. C. Each time segment represents the elapsed time from the last available SDCCH being allocated to the next occurrence of a release of a SDCCH, so making it available for allocation. The allocation event can be for any reason e.g. new call, Handover, and is represented by a SABM Message. These time segments are accumulated to give a single total (GSM 04.08 [2]). D. allAvailableSDCCHAllocatedTime. E. A single real value. F. CELL Measurement Function. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 57 (GSM 12.04 version 7.0.0 Release 1998) G. Valid for circuit switching. B.2.1.26 Mean SDCCH queue length A. This measurement provides the arithmetic mean of the number of all messages waiting for transmission on the SDCCH. B. SI. C. This measurement is obtained by sampling at a pre-defined interval (System designed), the SDCCH queue length and then taking the arithmetic mean (GSM 04.08 [2]). D. meanSDCCHQueueLength. E. A single real value. F. CELL Measurement Function. G. Valid for circuit switching. B.2.1.27 Number of lost Radio links while using an SDCCH A. This measurement provides the number of RF failure while using the SDCCH. B. CC. C. A local end release, due to a "RADIO LINK FAILURE", experienced by the BTS when using an SDCCH (GSM 08.58 [6]). D. nbrOfLostRadioLinksSDCCH. E. A single integer value. F. CELL Measurement Function. G. Valid for circuit switching. B.2.1.28 Relative time downlink power control at maximum A. This measurement provides the time downlink power control was running at maximum level for the busy TCHs over the measured period, relative to the total TCH busy time. B. CC. C. Each time segment represents the elapsed time when BS_TXPWR_MAX is at maximum for each busy TCH. These time segments are accumulated to give a single total. From this information a value is derived such that it reflects a percentage of the total channel busy time, (GSM 05.08 [4]). D. relativeTimeDLPowerControlAtMax. E. A single real value. F. CELL Measurement Function. G. Valid for circuit switching. B.2.1.29 Relative time uplink power control at maximum A. This measurement provides the time uplink power control was running at maximum level for the seized TCHs over the measured period, relative to the total TCH busy time. B. CC. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 58 (GSM 12.04 version 7.0.0 Release 1998) C. Each time segment represents the elapsed time when MS_TXPWR_MAX is at maximum for each busy TCH. These time segments are accumulated to give a single total. From this information a value is derived such that it reflects a percentage of the total channel busy time, (GSM 05.08 [4]). D. relativeTimeULPowerControlAtMax. E. A single real value. F. CELL Measurement Function. G. Valid for circuit switching. B.2.1.30 Successful Internal Handovers, intra-CELL A. This measurement provides the number of times a call moves from the occupied channel of the CELL to another free channel of the same CELL. B. CC. C. Transmission of "HANDOVER PERFORMED" Message to the MSC (GSM 08.08 [5]). D. succInternalHDOsIntraCell. E. A single integer value. F. CELL Measurement Function. G. Valid for circuit switching. B.2.1.31 Unsuccessful Internal Handovers, intra-CELL A. This measurement provides the number of unsuccessful intra CELL Handovers, i.e. an attempt was made to move a call .from the occupied channel of the CELL to another free channel of the same CELL. B. CC. C. Receipt of "ASSIGNMENT FAILURE" Message for the attempted handover (GSM 04.08 [2]). D. unsuccInternalHDOsIntraCell. E. A single integer value. F. CELL Measurement Function. G. Valid for circuit switching. B.2.1.32 Attempted incoming Internal inter CELL Handovers A. This measurement provides the number of attempted incoming Handovers into the observed CELL from the related adjacent CELLs controlled by the same BSC, further information can be found in GSM 04.08 [2], 08.08 [5] and 08.58 [6]. B. CC. C. An occurrence of a BSC internal event, depending on Handover algorithm. D. attIncomingInternalInterCellHDOs. E. A single integer value. F. CELL Measurement Function. G. Valid for circuit switching. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 59 (GSM 12.04 version 7.0.0 Release 1998) B.2.1.33 Successful incoming Internal inter CELL Handovers A. This measurement provides the number of successful incoming Handovers into the observed CELL from the related adjacent CELLs controlled by the same BSC. B. CC. C. Transmission of a "HANDOVER PERFORMED" Message to the MSC (GSM 08.08 [5]). D. succIncomingInternalInterCellHDOs. E. A single integer value. F. CELL Measurement Function. G. Valid for circuit switching. B.2.1.34 Attempted outgoing Internal inter CELL Handovers A. This measurement provides the number of attempted outgoing Handovers from the observed CELL to the related adjacent CELLs controlled by the same BSC. B. CC. C. Transmission of a "HANDOVER COMMAND" Message (GSM 08.08 [5]). D. attOutgoingInternalInterCellHDOs. E. A single integer value. F. CELL Measurement Function. G. Valid for circuit switching. B.2.1.35 Successful outgoing Internal inter CELL Handovers A. This measurement provides the number of successful outgoing Handovers from the observed CELL to the related adjacent CELLs controlled by the same BSC. B. CC. C. Transmission of a "HANDOVER PERFORMED" Message to the MSC (GSM 08.08 [5]). D. succOutgoingInternalInterCellHDOs. E. A single integer value. F. CELL Measurement Function. G. Valid for circuit switching. B.2.1.36 Unsuccessful Internal Handovers with reconnection to old channels A. This measurement provides the number of unsuccessful Handovers (with reconnection to the original channels), for the observed CELL. B. CC. C. Receipt of "HANDOVER FAILURE" Message received for the attempted handover (GSM 04.08 [2]). D. unsuccHDOsWithReconnection. E. A single integer value. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 60 (GSM 12.04 version 7.0.0 Release 1998) F. CELL Measurement Function. G. Valid for circuit switching. B.2.1.37 Unsuccessful Internal Handovers with loss of connection A. This measurement provides the number of unsuccessful Handovers that end in loosing the speech channel, for the observed CELL. B. CC. C. Expiry of timer T3103 for Inter CELL Handovers and Expiry of timer T3107 for Intra CELL Handovers (GSM 04.08 [2]). D. unsuccHDOsWithLossOfConnection. E. A single integer value. F. CELL Measurement Function. G. Valid for circuit switching. B.2.1.38 Number of Available PDCH A. This measurement provides the current number of PDCHs which are available to be used (including those actually in use). B. GAUGE. C. The gauge will be incremented when the PDCH becomes available and decremented when it becomes unavailable. The PDCH is available when its administrative state is "unlocked" or "shuttingdown" and the operational state is "enabled", and is unavailable when its administrative state changes to "locked" or operational state changes to "disabled". The gauge value equals the number of PDCHs with an administrative state of "unlocked" or "shuttingdown" and an operational state of "enabled". D. availablePDCH E. A single integer value. F. CELL Measurement Function. G. Valid for packet switching. B.2.1.39 Mean Number of Available PDCH A. This measurement provides the mean number of PDCHs which are available to be used (including those actually in use) over the measured period. B. GAUGE. C. The gauge will be incremented when the PDCH becomes available and decremented when it becomes unavailable. The PDCH is available when its administrative state is "unlocked" or "shuttingdown" and the operational state is "enabled", and is unavailable when its administrative state changes to "locked" or operational state changes to "disabled". The gauge value equals the number of PDCHs with an administrative state of "unlocked" or "shuttingdown" and an operational state of "enabled". D. meanNbrAvailablePDCH E. A single integer value. F. CELL Measurement Function. G. Valid for packet switching. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 61 (GSM 12.04 version 7.0.0 Release 1998) B.2.1.40 Maximum Number of Available PDCH A. This measurement provides the maximum number of PDCHs which are available to be used (including those actually in use) over the measured period. B. GAUGE. C. The gauge will be incremented when the PDCH becomes available and decremented when it becomes unavailable. The PDCH is available when its administrative state is "unlocked" or "shuttingdown" and the operational state is "enabled", and is unavailable when its administrative state changes to "locked" or operational state changes to "disabled". The gauge value equals the number of PDCHs with an administrative state of "unlocked" or "shuttingdown" and an operational state of "enabled". D. maxNbrAvailablePDCH E. A single integer value. F. CELL Measurement Function. G. Valid for packet switching. B.2.1.41 Minimum Number of Available PDCH A. This measurement provides the minimum number of PDCHs which are available to be used (including those actually in use) over the measured period. B. GAUGE. C. The gauge will be incremented when the PDCH becomes available and decremented when it becomes unavailable. The PDCH is available when its administrative state is "unlocked" or "shuttingdown" and the operational state is "enabled", and is unavailable when its administrative state changes to "locked" or operational state changes to "disabled". The gauge value equals the number of PDCHs with an administrative state of "unlocked" or "shuttingdown" and an operational state of "enabled". D. minNbrAvailablePDCH E. A single integer value. F. CELL Measurement Function. G. Valid for packet switching. B.2.1.42 Mean number of occupied PDCHs A. This measurement provides the arithmetic mean number of occupied PDCHs. B. SI. C. This measurement is obtained by sampling at a pre-defined interval (System designed), the number of PDCHs which are carrying packet traffic and then taking the arithmetic mean (GSM 04.60 [23]). D. meanNbrOfOccPDCHs. E. A single real value. F. CELL Measurement Function. G. Valid for packet switching. B.2.1.43 Maximum number of occupied PDCHs A. This measurement provides the highest recorded value for the number occupied by PDCHs.. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 62 (GSM 12.04 version 7.0.0 Release 1998) B. GAUGE. C. This measurement is obtained by sampling at a pre-defined interval (System designed), the maximum number of PDCHs which are carrying packet traffic. (GSM 04.60 [23]). D. maxNbrOfOccPDCHss. E. A single integer value. F. CELL Measurement Function. G. Valid for packet switching. B.2.1.44 Minimum number of occupied PDCHs A. This measurement provides the lowest recorded value for the number of occupied PDCHs. B. GAUGE. C. This measurement is obtained by sampling at a pre-defined interval (System designed), the maximum number of PDCHs which are carrying packet traffic. (GSM 04.60 [23]). C. minNbrOfOccPDCHss. D. A single integer value E. CELL Measurement Function. G. Valid for packet switching. B.2.1.45 All available PDCH allocated time A. This measurement gives the total amount of time in the granularity period, where all PDCHs were allocated. B. SI C. This time is computed with starting time when the last PDCH is assigned and the end time when a PDCH is first released. D. availablePDCHAllocatedTime E. A single integer value. F. CELL Measurement Function G. Valid for packet switching. B.2.1.46 Transmission of Packet Paging Messages on the PCCCH A. This measurement provides the number of Packet Paging messages transmitted over PCCCH(these are counted as attempts). B. CC. C. Transmission of "PACKET PAGING REQUEST" (GSM 04.60 [23]). D. nbrPacketPagingMessagesPCHOnPCCCH. E. A single integer value. F. CELL Measurement Function. G. Valid for packet switching. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 63 (GSM 12.04 version 7.0.0 Release 1998) B.2.1.47 Mean PPCH-PAGCH queue length on PCCCH A. This measurement provides the arithmetic mean of the number of all messages waiting for transmission on the PPCH-PAGCH sub channel on the PCCCH. B. SI. C. This measurement is obtained by sampling at a pre-defined interval (System designed), the PPCH-PAGCH queue length and then taking the arithmetic mean (GSM 04.60 [23]). D. meanPPCHPAGCHQueueLengthOnPCCCH. E. A single real value. F. CELL Measurement Function. G. Valid for packet switching. B.2.1.48 Number of Packet Pages Discarded from the PPCH Queue on PCCCH A. This measurement provides the number of Packet Paging messages which are discarded from the PPCH queue before they could be transmitted on PCCCH. B. CC. C. Pages can be discarded from the queues (assuming queuing is in operation) for a number of reasons, including queue overflow, priority insertion in the queue causing an overflow and in-queue timer expiry (GSM 04.60 [23]). D. nbrOfPSPagesDiscardedFromPPCHQueueOnPCCCH. E. An integer value for the paging queue in the CELL. F. CELL Measurement Function. G. Valid for packet switching. B.2.1.49 Number of Packet Channel Assignment Requests, per cause A. This measurement provides the number of packet channel assignment requests, per cause. B. CC. C. Receipt of "PACKET CHANNEL REQUEST" message sent from the MS on the PRACH or by the "CHANNEL REQUEST" message sent on the RACH.. Note, the establishment causes are: defined in (GSM 04.08 [2]) for channel request message and (GSM 04.60[ ] for the packet channel request message. D. attPCReqAssPerCause. E. An integer value per cause. F. CELL Measurement Function. G. Valid for packet switching. B.2.1.50 Successful Packet Channel Assignment Procedures, per cause A. This measurement provides the number of successful packet channel assignment procedures, per cause. Note: A packet channel assignment is considered successful when either the "PACKET UPLINK ASSIGNMENT" message or the "IMMEDIATE ASSIGNMENT COMMAND" message is sent. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 64 (GSM 12.04 version 7.0.0 Release 1998) B. CC. C. Transmission of "IMMEDIATE ASSIGN COMMAND" message on the AGCH or the "PACKET UPLINK ASSIGNMENT" message on the PAGCH. Note, If the message contains assignment information for two mobiles (GSM 04.60 [23]). If the establishment cause is identical for the two mobile stations, the counter shall be incremented by two. Otherwise the affected counters shall be incremented by one. NOTE: System implementation will allow these establishment causes to be incorporated into B 2.1.7. D. succPDTCHAssProcsPerCause. E. An integer value per cause. F. CELL Measurement Function. G. Valid for packet switching. B.2.1.51 Successful PDTCH seizures A. This measurement provides the number of successful PDTCH seizures. B. CC. C. Receipt of the first RLC Block (PDU) on the PDTCH from the MS, (GSM 04.60 [23]). D. succPDTCHSeizures. E. A single integer value. F. CELL Measurement Function. G. Valid for Packet switching. B.2.1.52 Mean PDTCH queue length A. This measurement provides the arithmetic mean of the number of all messages waiting for transmission on the PDTCH. B. CC C. This measurement is obtained by sampling at a predefined interval (System design), , the PDTCH queue length and then taking the arithmetic mean. D. meanPacketQueueLength E. A single real value F. CELL Measurement function G. Valid for packet switching B.2.1.53 Number of service upgrades/downgrades A. With service upgrade and downgrade it is meant a switch from the used coding scheme (CS1, CS2, ...) to another one. This measurement counts the number of these upgrades / downgrades per cell. B. CC C. The Trigger Event is a Service upgrade or downgrade for the observed object. D. nbrOfServiceChanges E. A single integer value for Upgrades and a single integer value for downgrades ETSI ETSI TS 100 615 V7.0.0 (2000-02) 65 (GSM 12.04 version 7.0.0 Release 1998) F. CELL Measurement function G. Valid for packet switching B.2.2 Internal HDO Measurement Function This measurement function allows Internal Handover information per observed CELL to be collected on a per adjacent originating or target CELL basis. This is achieved by specifying the adjacent originating or target CELL identity as parameter when initiating the Measurement Function. B.2.2.1 Attempted incoming Internal inter CELL Handovers per originating CELL A. This measurement provides the number of attempted incoming Handovers into the observed CELL from the specified adjacent originating CELL, controlled by this BSC, further information can be found in GSM 04.08 [2], 08.08 [5] and 08.58 [6]. B. CC. C. An occurrence of a BSC internal event, depending on Handover algorithm. D. attIncomingInternalInterCellHDOsPerOriginatingCell. E. A single integer value for the observed CELL from the originating CELL. F. Internal HDO Measurement Function. G. Valid for circuit switching. B.2.2.2 Successful incoming Internal inter CELL Handovers per originating CELL A. This measurement provides the number of successful incoming Handovers into the observed CELL from the specified adjacent originating CELL controlled by this BSC. B. CC. C. Transmission of a "HANDOVER PERFORMED" Message to the MSC (GSM 08.08 [5]). D. succIncomingInternalInterCellHDOsPerOriginatingCell. E. A single integer value for the observed CELL from the originating CELL. F. Internal HDO Measurement Function. G. Valid for circuit switching. B.2.2.3 Attempted outgoing Internal inter CELL Handovers per target CELL A. This measurement provides the number of attempted outgoing Handovers from the observed CELL to the specified adjacent target CELL controlled by this BSC. B. CC. C. Transmission of a "HANDOVER COMMAND" Message (GSM 04.08 [2]). D. attOutgoingInternalInterCellHDOsPerTargetCell. E. A single integer value for the observed CELL to the target CELL. F. Internal HDO Measurement Function. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 66 (GSM 12.04 version 7.0.0 Release 1998) G. Valid for circuit switching. B.2.2.4 Successful outgoing Internal inter CELL Handovers per target CELL A. This measurement provides the number of successful outgoing Handovers from the observed CELL to the specified adjacent target CELL controlled by this BSC. B. CC. C. Transmission of a "HANDOVER PERFORMED" Message to the MSC (GSM 08.08 [5]). D. succOutgoingInternalInterCellHDOsPerTargetCell. E. A single integer value for the observed CELL to the target CELL. F. Internal HDO Measurement Function. G. Valid for circuit switching. B.3 Measurements Related to the MSC B.3.1 MSC Measurement Function B.3.1.1 Number of class mark updates A. This measurement provides the number of classmark updates received from the BSS at the MSC. B. CC. C. Receipt of "CLASSMARK UPDATE" Message (GSM 08.08 [5]). D. nbrOfClassMarkUpdates. E. A single integer value. F. MSC Measurement Function. G. Valid for circuit switching. B.3.1.2 Attempted mobile originating calls A. This measurement provides the number of call attempts for mobile originating traffic. B. CC. C. Receipt of "CM_SERV_REQ" Message from the originating MS, with service type set to originating call establishment (GSM 04.08 [2]). D. attMobileOriginatingCalls. E. A single integer value. F. MSC Measurement Function. G. Valid for circuit switching. B.3.1.3 Successful mobile originating calls A. This measurement provides the number of successful calls for mobile originating traffic. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 67 (GSM 12.04 version 7.0.0 Release 1998) B. CC. C. Receipt of "ASSIGNMENT COMPLETE" Message from the originating MS, for the requested mobile originating call (GSM 08.08 [5]). Note, the "ALERTING" Message from GSM 04.08 [2] is not used as the implementation of it is optional. D. succMobileOriginatingCalls. E. A single integer value. F. MSC Measurement Function. G. Valid for circuit switching. B.3.1.4 Answered mobile originating calls A. This measurement provides the number of answered calls for mobile originating traffic. B. CC. C. Receipt of "CONNECT ACKNOWLEDGE" Message from the originating MS, for the requested mobile originating call (GSM 04.08 [2]). D. ansMobileOriginatingCalls. E. A single integer value. F. MSC Measurement Function. G. Valid for circuit switching. B.3.1.5 Attempted mobile terminating calls A. This measurement provides the number of call attempts for mobile terminating traffic. B. CC. C. Transmission of "SETUP" Message to the called MS, for the requested mobile terminating call (GSM 04.08 [2]). D. attMobileTerminatingCalls. E. A single integer value. F. MSC Measurement Function. G. Valid for circuit switching. B.3.1.6 Successful mobile terminating calls A. This measurement provides the number of successful calls for mobile terminating traffic. B. CC. C. Receipt of "ASSIGNMENT COMPLETE" Message from the called MS, for the requested mobile terminating call (GSM 08.08 [5]). Note, the "ALERTING" Message from GSM 04.08 [2] is not used as the implementation of it is optional. D. succMobileTerminatingCalls. E. A single integer value. F. MSC Measurement Function. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 68 (GSM 12.04 version 7.0.0 Release 1998) G. Valid for circuit switching. B.3.1.7 Answered mobile terminating calls A. This measurement provides the number of answered calls for mobile terminating traffic. B. CC. C. Transmission of "CONNECTION ACKNOWLEDGE" Message to the called MS, for the requested mobile terminating call (GSM 04.08 [2]). D. ansMobileTerminatingCalls. E. A single integer value. F. MSC Measurement Function. G. Valid for circuit switching. B.3.1.8 Attempted Mobile Emergency calls A. This measurement provides the number of emergency call attempts. B. CC. C. Receipt of "CM_SERV_REQ" Message from the originating MS, with service indicator set to emergency call (GSM 04.08 [2]). D. attMobileEmergencyCalls. E. A single integer value. F. MSC Measurement Function. G. Valid for circuit switching. B.3.1.9 Successful Mobile Emergency calls A. This measurement provides the number of successful emergency calls. B. CC. C. Receipt of "ASSIGNMENT COMPLETE" Message from the originating MS, for the requested emergency call (GSM 08.08 [5]). Note, the "ALERTING" Message from GSM 04.08 [2] is not used as the implementation of it is optional. D. succMobileEmergencyCalls. E. A single integer value. F. MSC Measurement Function. G. Valid for circuit switching. B.3.1.10 Answered Mobile Emergency calls A. This measurement provides the number of answered emergency calls. B. CC. C. Receipt of "CONNECTION ACKNOWLEDGE" Message from the originating MS, for the requested emergency call (GSM 04.08 [2]). ETSI ETSI TS 100 615 V7.0.0 (2000-02) 69 (GSM 12.04 version 7.0.0 Release 1998) D. ansMobileEmergencyCalls. E. A single integer value. F. MSC Measurement Function. G. Valid for circuit switching. B.3.1.11 Attempted ciphering mode control procedures A. This measurement provides the number of ciphering mode control procedures transmitted (these are counted as attempts). B. CC. C. Transmission of "CIPHER MODE COMMAND" (GSM 08.08 [5]). D. attCipheringModeControlProcs. E. A single integer value. F. MSC Measurement Function. G. Valid for circuit switching. B.3.1.12 Successful ciphering mode control procedures A. This measurement provides the number of successful ciphering mode control procedures. B. CC. C. Receipt of "CIPHER MODE COMPLETE" Message (GSM 08.08 [5]). D. succCipheringModeControlProcs. E. A single integer value. F. MSC Measurement Function. G. Valid for circuit switching. B.3.1.13 Attempted interrogations of HLRs for routing A. This measurement provides the number of HLR interrogations by the GMSC with the purpose of routing incoming calls (these are counted as attempts). B. CC. C. Transmission of a "MAP_SEND_ROUTING_INFORMATION" service request (GSM 09.02 [7]). D. attInterrogationOfHLRsForRouting. E. A single integer value. F. MSC Measurement Function. G. Valid for circuit switching. B.3.1.14 Successful interrogations of HLR (MSRN obtained) A. This measurement provides the number of successful HLR interrogations, where MSRN is obtained. B. CC. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 70 (GSM 12.04 version 7.0.0 Release 1998) C. Receipt of "MAP_SEND_ROUTING_INFORMATION" service confirmation containing a "MSRN" parameter value (GSM 09.02 [7]). D. succInterrogationOfHLRsMSRNObtained. E. A single integer value. F. MSC Measurement Function. G. Valid for circuit switching. B.3.1.15 Successful interrogations of HLR (call Forwarding) A. This measurement provides the number of successful HLR interrogations, by the GMSC for call forwarding. B. CC. C. Receipt of "MAP_SEND_ROUTING_INFORMATION" service confirmation containing a "Forwarding Data" parameter value (GSM 09.02 [7]). D. succInterrogationOfHLRsCallForwarding. E. A single integer value. F. MSC Measurement Function. G. Valid for circuit switching. B.3.1.16 Attempted operations for mobile originating point to point SMs A. This measurement provides the number of operations for mobile originating point to point short messages (these are counted as attempts). B. CC. C. Receipt of "RP-DATA" Message (GSM 04.11 [3]). D. attOpForMobileOriginatingPointToPointSMs. E. A single integer value. F. MSC Measurement Function. G. Valid for circuit switching. B.3.1.17 Successful operations for mobile originating point to point SMs A. This measurement provides the number of successful operations for mobile originating point to point short messages. B. CC. C. Transmission of "RP-ACK" Message (GSM 04.11 [3]). D. succOpForMobileOriginatingPointToPointSMs. E. A single integer value. F. MSC Measurement Function. G. Valid for circuit switching. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 71 (GSM 12.04 version 7.0.0 Release 1998) B.3.1.18 Attempted operations for mobile terminating point to point SMs A. This measurement provides the number of operations for mobile terminating point to point short messages (these are counted as attempts). B. CC. C. Transmission of "RP-DATA" Message (GSM 04.11 [3]). D. attOpForMobileTerminatingPointToPointSMs. E. A single integer value. F. MSC Measurement Function. G. Valid for circuit switching. B.3.1.19 Successful operations for mobile terminating point to point SMs A. This measurement provides the number of successful operations for mobile terminating point to point short messages. B. CC. C. Receipt of "RP-ACK" Message (GSM 04.11 [3]). D. succOpForMobileTerminatingPointToPointSMs. E. A single integer value. F. MSC Measurement Function. G. Valid for circuit switching. B.3.1.20 Number of transmitted check IMEI request A. This measurement provides the number of check IMEI request sent from MSC to the EIR. B. CC. C. Transmission of "MAP_CHECK_IMEI" service request (GSM 09.02 [7]). D. nbrOfTransCheckIMEIRequests. E. A single integer value. F. MSC Measurement Function. G. Valid for circuit switching. B.3.1.21 Number of white answers in MSC A. This measurement provides the number of white answers received from the EIR. B. CC. C. Receipt of "MAP_CHECK_IMEI" service confirmation containing an "equipment status" referring to white listed equipment (GSM 09.02 [7] and GSM 02.16 [1]). D. nbrOfWhiteAnsInMSC. E. A single integer value. F. MSC Measurement Function. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 72 (GSM 12.04 version 7.0.0 Release 1998) G. Valid for circuit switching. B.3.1.22 Number of grey answers in MSC A. This measurement provides the number of grey answers received from the EIR. B. CC. C. Receipt of "MAP_CHECK_IMEI" service confirmation containing an "equipment status" referring to grey listed equipment (GSM 09.02 [7] and GSM 02.16 [1]). D. nbrOfGreyAnsInMSC. E. A single integer value. F. MSC Measurement Function. G. Valid for circuit switching. B.3.1.23 Number of black answers in MSC A. This measurement provides the number of black answers received from the EIR. B. CC. C. Receipt of "MAP_CHECK_IMEI" service confirmation containing an "equipment status" referring to black listed equipment (GSM 09.02 [7] and GSM 02.16 [1]). D. nbrOfBlackAnsInMSC. E. A single integer value. F. MSC Measurement Function. G. Valid for circuit switching. B.3.1.24 Number of unknown IMEI answers A. This measurement provides the number of unknown IMEI answers received from the EIR. B. CC C. Receipt of "MAP_CHECK_IMEI" service confirmation with a parameter "user error" referring to unknown equipment (GSM 09.02 [7]). D. nbrOfUnknownIMEIAnsInMSC. E. A single integer value. F. MSC Measurement Function. G. Valid for circuit switching. B.3.1.25 Mean time to provide the CALL SETUP service A. This measurement provides the arithmetic mean of the time to provide the CALL SETUP service to a requesting MS. B. DER. C. This measurement is obtained by accumulating the time intervals between "SETUP" and the corresponding "ASSIGNMENT COMPLETE" messages over a granularity period using DER. This end value of the time will ETSI ETSI TS 100 615 V7.0.0 (2000-02) 73 (GSM 12.04 version 7.0.0 Release 1998) then be divided by the number of call set-ups observed in the granularity period to give the arithmetic mean (GSM 04.08 [2], GSM 08.08 [5]). D. meanTimeToCallSetupService. E. A single real value. F. MSC Measurement Function. G. Valid for circuit switching. B.3.1.26 Mean time to provide the LOCATION UPDATING service A. This measurement provides the arithmetic mean of the time to provide the LOCATION UPDATING service to an MS changing Location area. B. DER. C. This measurement is obtained by accumulating the time interval between "LOCATION UPDATING REQUEST" and the corresponding "LOCATION UPDATING ACCEPT" Message over a granularity period using DER. This end value of the time will then be divided by number of Location Updating requests observed in the granularity period to give the arithmetic mean (GSM 04.08 [2]). D. meanTimeToLocationUpdateService. E. A single real value. F. MSC Measurement Function. G. Valid for circuit and packet switching. B.3.1.27 Transactions on the MM-layer where subscriber was identified with TMSI A. This measurement provides the number of transactions on the MM-layer where the mobile subscriber was identified with his TMSI. B. CC. C. Any MM-layer transaction which causes the MS to be identified with his TMSI (GSM 04.08 [2]) i.e. CM_Re- establishment, CM_Service request, Identity response, IMSI detach indication, Location updating accept, Location updating request, TMSI re-allocation command. D. transSubIdentifiedWithTMSI. E. A single integer value. F. MSC Measurement Function. G. Valid for circuit switching. B.3.1.28 Transactions on the MM-layer where subscriber was identified with IMSI A. This measurement provides the number of transactions on the MM-layer where the mobile subscriber was identified with his IMSI. B. CC. C. Any MM-layer transaction which causes the MS to be identified with his IMSI (GSM 04.08 [2]), i.e. CM_Re- establishment, CM_Service request, Identity response, IMSI detach indication, Location updating accept, Location updating request, TMSI re-allocation command. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 74 (GSM 12.04 version 7.0.0 Release 1998) D. transSubIdentifiedWithIMSI. E. A single integer value. F. MSC Measurement Function. G. Valid for circuit switching. B.3.1.29 Attempted TMSI re-allocations A. This measurement provides the number of TMSI re-allocation, invoked either explicitly as part of TMSI re- allocation procedure or implicitly as part of Location Update procedure. B. CC. C. Transmission of "TMSI REALLOCATION COMMAND" Message, or a "LOCATION UPDATING ACCEPT" Message where the MS is identified with TMSI (GSM 04.08 [2]). D. attTMSIReallocations. E. A single integer value. F. MSC Measurement Function. G. Valid for circuit switching. B.3.1.30 Successful TMSI re-allocations A. This measurement provides the number of successfully performed TMSI re-allocations. B. CC. C. Receipt of "TMSI REALLOCATION COMPLETE" Message (GSM 04.08 [2]). D. succTMSIReallocations. E. A single integer value. F. MSC Measurement Function. G. Valid for circuit switching. B.3.1.31 IMSI detach procedures A. This measurement provides the number of IMSI procedures that involve a detach within one MSC area, (see BSC Measurement Function for IMSI attach procedures) B. CC. C. Receipt of "IMSI DETACH INDICATION" Message from the MS (GSM 04.08 [2]). D. imsiDetachProcs. E. A single integer value. F. MSC Measurement Function. G. Valid for circuit and packet switching. B.3.1.32 IMSI attach procedures A. This measurement provides the number of IMSI procedures that involve an attach within one MSC area. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 75 (GSM 12.04 version 7.0.0 Release 1998) B. CC. C. Receipt of "LOCATION UPDATING REQUEST" Message from the MS, indicating an IMSI attach, (GSM 04.08 [2]) (see MSC Measurement Function for IMSI detach procedures). D. imsiAttachProcs. E. A single integer value. F. MSC Measurement Function. G. Valid for circuit switching and packet switched. B.3.1.33 Attempted incoming External intra-MSC Handovers A. This measurement provides the number of attempted incoming Handovers into the observed CELL from the related adjacent CELLs controlled by this MSC. B. CC. C. Transmission of a "HANDOVER REQUEST" Message to the BSC (GSM 08.08 [5]). D. attIncomingExternalIntraMSCHDOs. E. A single integer value. F. MSC Measurement Function. G. Valid for circuit switching. B.3.1.34 Successful incoming External intra-MSC Handovers A. This measurement provides the number of successful incoming Handovers into the observed CELL from the related adjacent CELLs controlled by this MSC. B. CC. C. Receipt of a "HANDOVER COMPLETE" Message from the BSC (GSM 08.08 [5]). D. succIncomingExternalIntraMSCHDOs. E. A single integer value. F. MSC Measurement Function. G. Valid for circuit switching. B.3.1.35 Attempted outgoing External intra-MSC Handovers A. This measurement provides the number of attempted outgoing Handovers from the observed CELL to the related adjacent CELLs controlled by this MSC (only first attempt shall be counted). B. CC. C. Receipt of a "HANDOVER REQUIRED" Message from the BSC (GSM 08.08 [5]). D. attOutgoingExternalIntraMSCHDOs. E. A single integer value. F. MSC Measurement Function. G. Valid for circuit switching. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 76 (GSM 12.04 version 7.0.0 Release 1998) B.3.1.36 Successful outgoing External intra-MSC Handovers A. This measurement provides the number of successful outgoing Handovers from the observed CELL to the related adjacent CELLs controlled by this MSC, further information can be found in GSM 04.08 [2], 08.08 [5], and 08.58 [6]. B. CC. C. Completion of release procedure for the involved channel. D. succOutgoingExternalIntraMSCHDOs. E. A single integer value. F. MSC Measurement Function. G. Valid for circuit switching. B.3.1.37 Attempted incoming inter-MSC Handovers A. This measurement provides the number of attempted incoming Handovers into the observed CELL from the related adjacent CELLs NOT controlled by this MSC. B. CC. C. Receipt of a "MAP_PERFORM_HANDOVER" service indication with target CELL identity equal to the observed CELL (GSM 09.02 [7]). D. attIncomingInterMSCHDOs. E. A single integer value. F. MSC Measurement Function. G. Valid for circuit switching. B.3.1.38 Successful incoming inter-MSC Handovers A. This measurement provides the number of successful incoming Handovers into the observed CELL from the related adjacent CELLs NOT controlled by this MSC. B. CC. C. Receipt of a "MAP_SEND_END_SIGNAL" service confirmation (GSM 09.02 [7]). D. succIncomingInterMSCHDOs. E. A single integer value. F. MSC Measurement Function. G. Valid for circuit switching. B.3.1.39 Attempted outgoing inter-MSC Handovers A. This measurement provides the number of attempted outgoing Handovers from the observed CELL to the related adjacent CELLs NOT controlled by this MSC. B. CC. C. Transmission of a "MAP_PERFORM_HANDOVER" service request (GSM 09.02 [7]). D. attOutgoingInterMSCHDOs. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 77 (GSM 12.04 version 7.0.0 Release 1998) E. A single integer value. F. MSC Measurement Function. G. Valid for circuit switching. B.3.1.40 Successful outgoing inter-MSC Handovers A. This measurement provides the number of successful outgoing Handovers from the observed CELL to the related adjacent CELLs NOT controlled by this MSC. B. CC. C. Transmission of "MAP_SEND_END_SIGNAL" service response (GSM 09.02 [7]). D. succOutgoingInterMSCHDOs. E. A single integer value. F. MSC Measurement Function. G. Valid for circuit switching. B.3.1.41 Attempted subsequent inter-MSC Handovers (back to MSCa) A. This measurement provides the number of attempted subsequent inter-MSC Handovers, where the call is handed back to the anchor MSC (MSCa), i.e. the first hand over takes place from MSCa to MSCb then subsequently an attempt is made to hand back to MSCa. B. CC. C. Receipt of "MAP_PERFORM_SUBSEQUENT_HANDOVER" service indication with target MSC identity equal to MSCa (GSM 09.02 [7]). D. attSubsequentInterMSCHDOsMSCa. E. A single integer value. F. MSC Measurement Function. G. Valid for circuit switching. B.3.1.42 Successful subsequent inter-MSC Handovers (back to MSCa) A. This measurement provides the number of successful subsequent inter-MSC Handovers, where the call is handed back to the anchor MSC (MSCa). i.e. the first hand over takes place from MSCa to MSCb then the call is subsequently successfully handed back to MSCa. B. CC. C. Transmission of "MAP_SEND_END_SIGNAL" service response (Handover to MSCa) (GSM 09.02 [7]). D. succSubsequentInterMSCHDOsMSCa. E. A single integer value. F. MSC Measurement Function. G. Valid for circuit switching. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 78 (GSM 12.04 version 7.0.0 Release 1998) B.3.1.43 Attempted subsequent inter-MSC Handovers (to MSCc) A. This measurement provides the number of attempted subsequent inter-MSC Handovers, where the call is handed over to MSCc, i.e. the first hand over takes place from MSCa to MSCb then subsequently an attempt is made to hand over to MSCc. B. CC. C. Receipt of "MAP_PERFORM_SUBSEQUENT_HANDOVER" service indication, with target MSC identity equal to MSCc (GSM 09.02 [7]). D. attSubsequentInterMSCHDOsMSCc. E. A single integer value. F. MSC Measurement Function. G. Valid for circuit switching. B.3.1.44 Successful subsequent inter-MSC Handovers (to MSCc) A. This measurement provides the number of successful subsequent inter-MSC Handovers, where the call is handed over to MSCc, i.e. the first hand over takes place from MSCa to MSCb then the call is subsequently successfully handed over to MSCc. B. CC. C. Transmission of "MAP_SEND_END_SIGNAL" service response (Handover to MSCc) (GSM 09.02 [7]). D. succSubsequentInterMSCHDOsMSCc. E. A single integer value. F. MSC Measurement Function. G. Valid for circuit switching. B.3.1.45 External Handovers A. This measurement provides the number of attempted MSC controlled Handovers. B. CC. C. Receipt of a "HANDOVER REQUIRED" Message (GSM 08.08 [5]). D. externalHDOs. E. A single integer value. F. MSC Measurement Function. G. Valid for circuit switching. B.3.1.46 External Handovers per cause A. This measurement provides the number of attempted MSC controlled Handovers, per cause. B. CC. C. Receipt of a "HANDOVER REQUIRED" Message (GSM 08.08 [5]). D. externalHDOsPerCause. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 79 (GSM 12.04 version 7.0.0 Release 1998) E. An integer value per cause. F. MSC Measurement Function. G. Valid for circuit switching. B.3.1.47 Unsuccessful External Handovers with reconnection to old channels, per MSC A. This measurement provides the number of unsuccessful Handovers with reconnection to the original channels (TCH & SDCCH), on a per MSC basis. B. CC. C. Receipt of: "HANDOVER FAILURE" Message for the attempted handover (GSM 08.08 [5]). D. unsuccExternHDOsWithReconnectionPerMSC. E. A single integer value. F. MSC Measurement Function. G. Valid for circuit switching. B.3.1.48 Unsuccessful External Handovers with loss of connection, per MSC A. This measurement provides the number of unsuccessful Handovers, with loss of the call, on a per MSC basis. B. CC. C. Receipt of "CLEAR REQUEST" Message for the requested Handover (GSM 08.08 [5]). D. unsuccExternHDOsWithLossOfConnectionPerMSC. E. A single integer value. F. MSC Measurement Function. G. Valid for circuit switching. B.3.2 External HDO Measurement Function This measurement function allows external Handover information per observed CELL to be collected on a per adjacent originating or target CELL basis. For the external Handovers both the observed CELL and the adjacent originating or target CELL identity has to be specified as the parameter when initiating the Measurement Function. B.3.2.1 Attempted incoming External intra-MSC Handovers per originating CELL A. This measurement provides the number of attempted incoming Handovers into the observed CELL from the specified adjacent originating CELL, controlled by this MSC. B. CC. C. Transmission of a "HANDOVER REQUEST" Message to the BSC (GSM 08.08 [5]). D. attIncomingExternalIntraMSCHDOsPerOriginatingCell. E. A single integer value for the observed CELL from the originating CELL. F. External HDO Measurement Function. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 80 (GSM 12.04 version 7.0.0 Release 1998) G. Valid for circuit switching. B.3.2.2 Successful incoming External intra-MSC Handovers per originating CELL A. This measurement provides the number of successful incoming Handovers into the observed CELL from the specified adjacent originating CELL, controlled by this MSC. B. CC. C. Receipt of a "HANDOVER COMPLETE" Message from the BSC (GSM 08.08 [5]). D. succIncomingExternalIntraMSCHDOsPerOriginatingCell. E. A single integer value for the observed CELL from the originating CELL. F. External HDO Measurement Function. G. Valid for circuit switching. B.3.2.3 Attempted outgoing External intra-MSC Handovers per target CELL A. This measurement provides the number of attempted outgoing Handovers from the observed CELL to the specified adjacent target CELL, controlled by this MSC (only first attempt shall be counted). B. CC. C. Receipt of a "HANDOVER REQUIRED" Message from the BSC (GSM 08.08 [5]). D. attOutgoingExternalIntraMSCHDOsPerTargetCell. E. A single integer value for the observed CELL to the target CELL. F. External HDO Measurement Function. G. Valid for circuit switching. B.3.2.4 Successful outgoing External intra-MSC Handovers per target CELL A. This measurement provides the number of successful outgoing Handovers from the observed CELL to the specified adjacent target CELL, controlled by this MSC, further information can be found in GSM 04.08 [2], 08.08 [5], and 08.58 [6]. B. CC. C. Completion of release procedure for the involved channel. D. succOutgoingExternalIntraMSCHDOsPerTargetCell. E. A single integer value for the observed CELL to the target CELL. F. External HDO Measurement Function. G. Valid for circuit switching. B.3.2.5 Attempted incoming inter-MSC Handovers per originating CELL A. This measurement provides the number of attempted incoming Handovers into the observed CELL from the specified adjacent originating CELL, NOT controlled by this MSC. B. CC. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 81 (GSM 12.04 version 7.0.0 Release 1998) C. Receipt of a "MAP_PERFORM_HANDOVER" service indication with target CELL identity equal to the observed CELL (GSM 09.02 [7]). D. attIncomingInterMSCHDOsPerOriginatingCell. E. A single integer value for the observed CELL from the originating CELL. F. External HDO Measurement Function. G. Valid for circuit switching. B.3.2.6 Successful incoming inter-MSC Handovers per originating CELL A. This measurement provides the number of successful incoming Handovers into the observed CELL from the specified adjacent originating CELL, NOT controlled by this MSC. B. CC. C. Receipt of a "MAP_SEND_END_SIGNAL" service confirmation (GSM 09.02 [7]). D. succIncomingInterMSCHDOsPerOriginatingCell. E. A single integer value for the observed CELL from the originating CELL. F. External HDO Measurement Function. G. Valid for circuit switching. B.3.2.7 Attempted outgoing inter-MSC Handovers per target CELL A. This measurement provides the number of attempted outgoing Handovers from the observed CELL to the specified adjacent target CELL, NOT controlled by this MSC. B. CC. C. Transmission of a "MAP_PERFORM_HANDOVER" service request (GSM 09.02 [7]). D. attOutgoingInterMSCHDOsPerTargetCell. E. A single integer value for the observed CELL to the target CELL. F. External HDO Measurement Function. G. Valid for circuit switching. B.3.2.8 Successful outgoing inter-MSC Handovers per target CELL A. This measurement provides the number of successful outgoing Handovers from the observed CELL to the specified adjacent target CELL, NOT controlled by this MSC. B. CC. C. Transmission of "MAP_SEND_END_SIGNAL" service response (GSM 09.02 [7]). D. succOutgoingInterMSCHDOsPerTargetCell. E. A single integer value for the observed CELL to the target CELL. F. External HDO Measurement Function. G. Valid for circuit switching. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 82 (GSM 12.04 version 7.0.0 Release 1998) B.4 Measurements Related to the HLR B.4.1 HLR Measurement Function B.4.1.1 Number of current MS's Roaming outside HPLMN A. This measurement provides the current number of home subscribers roaming outside HPLMN. B. GAUGE. C. The gauge is updated (increased or decreased) on receipt of a "MAP_UPDATE_LOCATION" service indication in the HLR(GSM 09.02 [7]). D. nbrOfCurrentMSsRoamingOutsideHPLMN. E. A single integer value. F. HLR Measurement Function. G. Valid for circuit and packet switching. B.4.1.2 Attempted requests for Authentication sets received by HLR A. This measurement provides the number of requests for Authentication sets received by the HLR (these are counted as attempts). B. CC. C. Receipt of an "MAP_SEND_AUTHENTICATION_INFO" service indication requesting Authentication sets (parameter "AuthenticationSetKind" present GSM 09.02 [7]). D. attReqForAuthSetsReceivedByHLR. E. A single integer value. F. HLR Measurement Function. G. Valid for circuit and packet switching. B.4.1.3 Successful returned Authentication sets from HLR A. This measurement provides the number of successful requests for Authentication sets from the HLR. B. CC. C. Transmission of an "MAP_SEND_AUTHENTICATION_INFO" service response containing Authentication sets (parameter "AuthenticationSetList" present GSM 09.02 [7]). D. succReturnedAuthSetsFromHLR. E. A single integer value. F. HLR Measurement Function. G. Valid for circuit and packet switching. B.4.1.4 Empty responses to request for Authentication sets from HLR A. This measurement provides the number of empty responses sent in response to requests for Authentication sets (the implication is that the destination node will have to reuse old Authentication sets). ETSI ETSI TS 100 615 V7.0.0 (2000-02) 83 (GSM 12.04 version 7.0.0 Release 1998) B. CC. C. Transmission of an "MAP_SEND_AUTHENTICATION_INFO" service response, no Authentication sets present (GSM 09.02 [7]). D. emptyResponsesForAuthSetsFromHLR. E. A single integer value. F. HLR Measurement Function. G. Valid for circuit and packet switching. B.4.1.5 Attempted insert subscriber data service A. This measurement provides the number of insert subscriber data services sent (these are counted as attempts). B. CC. C. Transmission of "MAP_INSERT_SUBSCRIBER_DATA" service request (GSM 09.02 [7]). D. attInsertSubDataService. E. A single integer value. F. HLR Measurement Function. G. Valid for circuit and packet switching. B.4.1.6 Successful insert subscriber data service A. This measurement provides the number of successful insert subscriber data services sent. B. CC. C. Receipt of "MAP_INSERT_SUBSCRIBER_DATA" service indication without "user error" parameter value (GSM 09.02 [7]). D. succInsertSubDataService. E. A single integer value. F. HLR Measurement Function. G. Valid for circuit and packet switching. B.4.1.7 Attempted Location Updates A. This measurement provides the number of Location Updates to be performed by the HLR (these are counted as attempts). B. CC. C. Receipt of "MAP_UPDATE_LOCATION" service indication (GSM 09.02 [7]). D. attLocationUpdate. E. A single integer value. F. HLR Measurement Function. G. Valid for circuit and packet switching. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 84 (GSM 12.04 version 7.0.0 Release 1998) B.4.1.8 Successful Location Updates A. This measurement provides the number of successfully performed Location Updates in the HLR,. B. CC. C. Transmission of "MAP_UPDATE_LOCATION" service response without "user error" parameter value (GSM 09.02 [7]). D. succLocationUpdate. E. A single integer value. F. HLR Measurement Function. G. Valid for circuit and packet switching. B.4.1.9 Attempted SS related operations in HLR A. This measurement provides the number of attempted SS related operations. B. CC. C. Receipt of a MAP service indication of: registerSS, eraseSS, activateSS, deactivateSS, registerPassword, interrogateSS, processSSrequest operations in the HLR, (GSM 09.02 [7]). D. attSSRelatedOperationsInHLR. E. A single integer value per SS operation. F. HLR Measurement Function. G. Valid for circuit switching. B.4.1.10 Successful SS related operations in HLR A. This measurement provides the number of successful SS related operations. B. CC. C. Transmission of MAP service response to: registerSS, eraseSS, activateSS, deactivateSS, registerPassword, interrogateSS, processSSrequest operations in the HLR without "user error" parameter (GSM 09.02 [7]). D. succSSRelatedOperationsInHLR. E. A single integer value per SS operation. F. HLR Measurement Function. G. Valid for circuit switching. B.4.1.11 Attempted request for SM routing information A. This measurement provides the number of requests for short Message routing information (these are counted as attempts). B. CC. C. Receipt of "MAP_SEND_ROUTING_INFO_FOR_SM" service indication (GSM 09.02 [7]). D. attReqForSMRoutingInfo. E. A single integer value. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 85 (GSM 12.04 version 7.0.0 Release 1998) F. HLR Measurement Function. G. Valid for circuit and packet switching. B.4.1.12 Successful request for SM routing information A. This measurement provides the number of successful requests for short Message routing information. B. CC. C. Transmission of "MAP_SEND_ROUTING_INFO_FOR_SM" service response without "user error" parameter (GSM 09.02 [7]). D. succReqForSMRoutingInfo. E. A single integer value. F. HLR Measurement Function. G. Valid for circuit and packet switching. B.4.1.13 Attempted SM delivery status report procedures A. This measurement provides the number of requests to set Message waiting data into HLR or to inform HLR of successful SM transfer after polling (these are counted as attempts). B. CC. C. Receipt of "MAP_REPORT_SM_DELIVERY_STATUS" service indication (GSM 09.02 [7]). D. attSMDeliveryStatusReportProcs. E. A single integer value. F. HLR Measurement Function. G. Valid for circuit and packet switching. B.4.1.14 Successful SM delivery status report procedures A. This measurement provides the number of successful requests to set Message waiting data into HLR or to inform HLR of successful SM transfer after polling. B. CC. C. Transmission of "MAP_REPORT_SM_DELIVERY_STATUS" service response without "user error" parameter value (GSM 09.02 [7]). D. succSMDeliveryStatusReportProcs. E. A single integer value. F. HLR Measurement Function. G. Valid for circuit and packet switching. B.4.1.15 Attempted number of send alerts A. This measurement provides the number of transmissions of send alerts (these are counted as attempts). B. CC. C. Transmission of a "MAP_ALERT_SERVICE_CENTRE" service request (GSM 09.02 [7]). ETSI ETSI TS 100 615 V7.0.0 (2000-02) 86 (GSM 12.04 version 7.0.0 Release 1998) D. attNbrOfSendAlerts. E. A single integer value. F. HLR Measurement Function. G. Valid for circuit and packet switching. B.4.1.16 Successful number of send alerts A. This measurement provides the successful transmissions of send alerts. B. CC. C. Receipt of a "MAP_ALERT_SERVICE_CENTRE" service confirmation without "user error" parameter value (GSM 09.02 [7]). D. succNbrOfSendAlerts. E. A single integer value. F. HLR Measurement Function. G. Valid for circuit and packet switching. B.4.1.17 Attempted request for MSRN A. This measurement provides the number of requests for MSRN from the VLR (these are counted as attempts). B. CC. C. Transmission of "MAP_PROVIDE_ROAMING_NUMBER" service request (GSM 09.02 [7]). D. attReqForMSRN. E. A single integer value. F. HLR Measurement Function. G. Valid for circuit switching. B.4.1.18 Successful request for MSRN A. This measurement provides the successful responses for allocations of MSRN received from the VLR. B. CC. C. Receipt of "MAP_PROVIDE_ROAMING_NUMBER" service confirmation without "user error" parameter value (GSM 09.02 [7]). D. succReqForMSRN. E. A single integer value. F. HLR Measurement Function. G. Valid for circuit switching. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 87 (GSM 12.04 version 7.0.0 Release 1998) B.5 Measurements Related to the VLR B.5.1 VLR Measurement Function B.5.1.1 Attempted MS memory available notifications A. This measurement provides the number of times a VLR informs the HLR that a MS is available for receiving short messages once again (these are counted as attempts). B. CC. C. Transmission of a "MAP_READY_FOR_SM" service request (GSM 09.02 [7]). D. attMSMemoryAvailableNotifications. E. A single integer value. F. VLR Measurement Function. G. Valid for circuit switching. B.5.1.2 Successful MS memory available notifications A. This measurement provides the number of times a VLR successfully informs the HLR that a MS is available for receiving short messages once again. B. CC. C. Receipt of "MAP_READY_FOR_SM" service confirmation without "user error" parameter value (GSM 09.02 [7]). D. succMSMemoryAvailableNotifications. E. A single integer value. F. VLR Measurement Function. G. Valid for circuit switching. B.5.1.3 Attempted Identification requests to PVLRs A. This measurement provides the number of identification information requests to the PVLR for subscribers registering afresh in this VLR (these are counted as attempts). B. CC. C. Transmission of "MAP_SEND_IDENTIFICATION" service request (GSM 09.02 [7]). D. attIdentificationReqToPVLRs. E. A single integer value. F. VLR Measurement Function. G. Valid for circuit switching. B.5.1.4 Successful Identification requests to PVLRs A. This measurement provides the number of successful identification requests to the PVLR for subscriber registering afresh in this VLR. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 88 (GSM 12.04 version 7.0.0 Release 1998) B. CC. C. Receipt of "MAP_SEND_IDENTIFICATION" service confirmation without "user error" parameter value (GSM 09.02 [7]). D. succIdentificationReqToPVLRs. E. A single integer value. F. VLR Measurement Function. G. Valid for circuit switching. B.5.1.5 Attempted page requests A. This measurement provides the number of page requests (these are counted as attempts). B. CC. C. Transmission of "MAP_PAGE" service request (GSM 09.02 [7]). D. attPageReqs. E. A single integer value. F. VLR Measurement Function. G. Valid for circuit switching. B.5.1.6 Successful page requests A. This measurement provides the number of successful page requests. B. CC. C. Receipt of "MAP_PAGE" service confirmation without a "user error" parameter value (GSM 09.02 [7]). D. succPageReqs. E. A single integer value. F. VLR Measurement Function. G. Valid for circuit switching. B.5.1.7 Attempted page requests per Location Area A. This measurement provides the number of page requests per Location Area (these are counted as attempts). B. CC. C. Transmission of "MAP_PAGE" service request (GSM 09.02 [7]). D. attPageReqsPerLocationArea. E. An integer value per Location Area. F. VLR Measurement Function. G. Valid for circuit switching. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 89 (GSM 12.04 version 7.0.0 Release 1998) B.5.1.8 Successful page requests per Location Area A. This measurement provides the number of successful page requests per Location Area. B. CC. C. Receipt of "MAP_PAGE" service confirmation without a "user error" parameter value (GSM 09.02 [7]). D. succPageReqsPerLocationArea. E. An integer value per Location Area. F. VLR Measurement Function. G. Valid for circuit switching. B.5.1.9 Attempted requests for Authentication sets sent to HLR by VLRs A. This measurement provides the number of requests to the HLR by the VLR for Authentication sets (these are counted as attempts). B. CC. C. Transmission of a "MAP_SEND_AUTHENTICATION_INFO" service request, requesting Authentication sets (parameter "AuthenticationSetKind" present GSM 09.02 [7]). D. attReqForAuthSetsSentToHLR. E. A single integer value. F. VLR Measurement Function. G. Valid for circuit switching. B.5.1.10 Successful received Authentication sets from HLR to VLRs A. This measurement provides the number of successful requests for Authentication sets from the HLR to the VLR. B. CC. C. Receipt of a "MAP_SEND_AUTHENTICATION_INFO" service confirmation, containing requested Authentication sets parameter "AuthenticationSetList" present (GSM 09.02 [7]). D. succReceivedAuthSetsFromHLR. E. A single integer value. F. VLR Measurement Function. G. Valid for circuit switching. B.5.1.11 Empty responses to request for Authentication sets from HLR to VLRs A. This measurement provides the number of empty responses received by the VLR in response to requests for Authentication sets (the implication is that the VLR will have to reuse old Authentication sets). B. CC. C. Receipt of a "MAP_SEND_AUTHENTICATION_INFO" service confirmation, no Authentication sets present (GSM 09.02 [7]). D. emptyResponsesForAuthFromHLR. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 90 (GSM 12.04 version 7.0.0 Release 1998) E. A single integer value. F. VLR Measurement Function. G. Valid for circuit switching. B.5.1.12 Attempted authentication procedures in VLR A. This measurement provides the number of authentication requests which are sent to the MSC (these are counted as attempts). B. CC. C. Transmission of a "MAP_AUTHENTICATE" service request (GSM 09.02 [7]). D. attAuthProcsInVLR. E. A single integer value. F. VLR Measurement Function. G. Valid for circuit switching. B.5.1.13 Successful authentication procedures in the VLR A. This measurement provides the number of successful authentication procedures in the VLR. B. CC. C. Receipt of a "MAP_AUTHENTICATE" service confirmation, where the received SRES parameter value matches value stored in the Location register (GSM 09.02 [7]). D. succAuthProcsInVLR. E. A single integer value. F. VLR Measurement Function. G. Valid for circuit switching. B.5.1.14 Attempted intra-VLR Location Updates A. This measurement provides the number of Location Updates, between Location areas of the same VLR (these are counted as attempts). B. CC. C. Receipt of "MAP_UPDATE_LOCATION_AREA" service indication, with previous Location Area identification parameter referring to the Location Area identity of the same VLR (GSM 09.02 [7]). D. attIntraVLRLocationUpdates. E. A single integer value. F. VLR Measurement Function. G. Valid for circuit switching. B.5.1.15 Successful intra-VLR Location Updates A. This measurement provides the successful Location Updates between Location Areas of the same VLR. B. CC. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 91 (GSM 12.04 version 7.0.0 Release 1998) C. Transmission of "MAP_UPDATE_LOCATION_AREA" service response without "user error" parameter value, for attempted intra-VLR Location Update (GSM 09.02 [7]). D. succIntraVLRLocationUpdates. E. A single integer value. F. VLR Measurement Function. G. Valid for circuit switching. B.5.1.16 Attempted inter-VLR Location Updates A. This measurement provides the number of Location Updates between Location Areas of different VLR (these are counted as attempts). B. CC. C. Receipt of "MAP_UPDATE_LOCATION_AREA" service indication, with previous Location Area identification parameter referring to the Location Area identity of the different VLR, or no previous VLR identity (GSM 09.02 [7]). D. attInterVLRLocationUpdates. E. A single integer value. F. VLR Measurement Function. G. Valid for circuit switching. B.5.1.17 Successful inter-VLR Location Updates A. This measurement provides the number of successful Location Updates between Location Areas of different VLRs. B. CC. C. Transmission of "MAP_UPDATE_LOCATION_AREA" service response without "user error" parameter value, for attempted inter-VLR Location Update (GSM 09.02 [7]). D. succInterVLRLocationUpdates. E. A single integer value. F. VLR Measurement Function. G. Valid for circuit switching. B.5.1.18 Arrivals of Visitors from other PLMNs A. This measurement provides the number of arrivals of visitors from other PLMNs i.e. exclude own MS's returning to HPLMN. This measurement has to be taken in each VLR of the HPLMN to get the total. B. CC. C. Receipt of "MAP_UPDATE_LOCATION_AREA" service indication, the previous Location of the subscriber was another PLMN (GSM 09.02 [7]). D. arrivalOfVisitorsFromOtherPLMNs. E. A single integer value. F. VLR Measurement Function. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 92 (GSM 12.04 version 7.0.0 Release 1998) G. Valid for circuit switching. B.6 Measurements Related to the EIR B.6.1 EIR Measurement Function B.6.1.1 Number of received IMEI check requests A. This measurement provides the number of IMEI check requests received by the EIR. B. CC. C. Receipt of "MAP_CHECK_IMEI" service indication (GSM 09.02 [7]). D. nbrOfReceivedIMEICheckReqs. E. A single integer value. F. EIR Measurement Function. G. Valid for circuit and packet switching. B.6.1.2 Number of white answers in EIR A. This measurement provides the number of white answers transmitted by the EIR. B. CC. C. Transmission of "MAP_CHECK_IMEI" service response containing an "equipment status" referring to a white listed equipment (GSM 09.02 [7] and GSM 02.16 [1]). D. nbrOfWhiteAnsInEIR. E. A single integer value. F. EIR Measurement Function. G. Valid for circuit and packet switching. B.6.1.3 Number of grey answers in EIR A. This measurement provides the number of grey answers transmitted by the EIR. B. CC. C. Transmission of "MAP_CHECK_IMEI" service response containing an "equipment status" referring to a grey listed equipment (GSM 09.02 [7] and GSM 02.16 [1]). D. nbrOfGreyAnsInEIR. E. A single integer value. F. EIR Measurement Function. G. Valid for circuit and packet switching. B.6.1.4 Number of black answers in EIR A. This measurement provides the number of black answers transmitted by the EIR. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 93 (GSM 12.04 version 7.0.0 Release 1998) B. CC. C. Transmission of "MAP_CHECK_IMEI" service response containing an "equipment status" referring to a black listed equipment (GSM 09.02 [7] and GSM 02.16 [1]). D. nbrOfBlackAnsInEIR. E. A single integer value. F. EIR Measurement Function. G. Valid for circuit and packet switching. B.6.1.5 Number of unknown IMEI answers A. This measurement provides the number of unknown IMEI answers transmitted by the EIR. B. CC C. Transmission of "MAP_CHECK_IMEI" service response containing a parameter "user error" referring to a unknown equipment (GSM 09.02 [7]). D. nbrOfUnknownIMEIAnsInEIR. E. A single integer value. F. EIR Measurement Function. G. Valid for circuit and packet switching. B.7 Measurements Related to the SMS IWMSC/GMSC B.7.1 SMS Measurement Function B.7.1.1 Attempted mobile originating SM Forwarding A. This measurement provides the number of attempted short Message forwarding handeled by the interworking MSC. B. CC. C. Receipt of "MAP_FORWARD_SHORT_MESSAGE" service indication (GSM 09.02 [7]). D. attMobileOriginatingSMForwardings. E. A single integer value. F. SMS Measurement Function. G. Valid for circuit and packet switching. B.7.1.2 Successful mobile originating SM Forwarding A. This measurement provides the number of successful short Message forwarding handeled by the interworking MSC. B. CC. C. Transmission of "MAP_FORWARD_SHORT_MESSAGE" service response without a "user error" parameter value (GSM 09.02 [7]). ETSI ETSI TS 100 615 V7.0.0 (2000-02) 94 (GSM 12.04 version 7.0.0 Release 1998) D. succMobileOriginatingSMForwardings. E. A single integer value. F. SMS Measurement Function. G. Valid for circuit and packet switching. B.7.1.3 Attempted Mobile Terminating SM Forwarding A. This measurement provides the number of short messages forwarding from SMS-GMSC to the service node, MSC or SGSN (these are counted as attempts). B. CC. C. Transmission of a "MAP_FORWARD_SHORT_MESSAGE" service request (GSM 09.02 [7]). D. attMobileTerminatingSMForwardings. E. A single integer value. F. SMS Measurement Function. G. Valid for circuit and packet switching. B.7.1.4 Successful Mobile Terminating SM Forwarding A. This measurement provides the number of successful of short Message forwarding from SMS-GMSC to the service node, MSC or SGSN. B. CC. C. Receipt of a "MAP_FORWARD_SHORT_MESSAGE" service response without a "user error" parameter value (GSM 09.02 [7]). D. succMobileTerminatingSMForwardings. E. A single integer value. F. SMS Measurement Function. G. Valid for circuit and packet switching. B.8 Measurements Related to the SGSN B.8.1 SGSN Measurement Function B.8.1.1 LLC Measurements B.8.1.1.1 Number of LLC frames sent A. This measurement provides the number of LLC frames sent by the SGSN. B. CC C. Transmission of LLC frame to a peer entity GSM TS 04.64 [24]. D. nbrLlcFramesSent E. A single integer value. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 95 (GSM 12.04 version 7.0.0 Release 1998) F. SGSN Measurement Function G. Valid for packet switching. B.8.1.1.2 Number of LLC frames Received A. This measurement provides the number of received LLC frames by the SGSN. B. CC C. Receipt of a LLC frames from a peer entity and before any error checking(GSM TS 04.64). D. nbrLlcFramesReceived E. A single integer value. F. SGSN Measurement Function. G. Valid for packet switching. B.8.1.1.3 Erroneously received LLC frames detected by SGSN A. This measurement provides the number of erroneously received LLC frames in case of error detection in the SGSN (uplink transmission, SGSN). B. CC C. Discard of a received frame in the SGSN, GSM TS 04.64 [24]. D. errLlcFramesDetectedBySgsn E. A single integer value. F. SGSN Measurement Function. G. Valid for packet switching. B.8.1.1.4 Number of Retransmitted LLC frames in Acknowledge Mode A. This measurement provides the number of retransmitted LLC frames in LLC acknowledge mode, detected in the MS and signalled to the SGSN (downlink transmission, MS). B. CC C. Receipt of a NACK or SACK frame from the peer entity (MS), GSM TS 04.64 [24]. D. retransmittedLlcFramestoMs E. A single integer value. F. SGSN Measurement Function. G. Valid for packet switching. B.8.1.2 SNDCP Measurements B.8.1.2.1 Number of received SNDCP N-PDUs A. This measurement provides the number of incoming N-PDUs received by the SNDCP protocol. B. CC C. Receipt of the "SN-DATA.ind" or "SN-UNITDATA.ind" primitive, GSM TS 04.65 [25]. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 96 (GSM 12.04 version 7.0.0 Release 1998) D. uplinkSndcpNpduReceived E. A single integer value. F. SGSN Measurement Function. G. Valid for packet switching. B.8.1.2.2 Number of received SNDCP N-PDU octets A. This measurement provides the number of octets in incoming N-PDUs received by the SNDCP protocol layer. B. CC C. Receipt of the "SN-DATA.ind" or "SN-UNITDATA.ind" primitive,GSM TS 04.65 [25]. D. uplinkSndcpOctetReceivedMode E. A single integer value. F. SGSN Measurement Function. G. Valid for packet switching. B.8.1.2.3 Number of sent SNDCP N-PDUs A. This measurement provides the number of outgoing N-PDUs sent by the SNDCP protocol layer. B. CC C. Sent of the "SN-DATA.req" and "SN-UNITDATA.ind" primitive(GSM TS 04.65). D. downlinkSndcpNpduSent E. A single integer value. F. SGSN Measurement Function. G. Valid for packet switching. B.8.1.2.4 Number of sent SNDCP N-PDU octets A. This measurement provides the number of octets in outgoing N-PDUs sent by the SNDCP protocol layer. B. CC C. Sent of the "SN-DATA.req" and "SN-UNITDATA.ind" primitive(GSM TS 04.65). D. downlinkSndcpOctetSent E. A single integer value. F. SGSN Measurement Function. G. Valid for packet switching. B.8.1.3 BSSGP Measurements FFS, to be defined. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 97 (GSM 12.04 version 7.0.0 Release 1998) B.8.1.4 MM Measurements B.8.1.4.1 Attempted GPRS attach procedures A. This measurement provides the number of attempted GPRS attach procedures initiated within this SGSN area. B. CC C. Receipt of "ATTACH REQUEST" message from the MS, indicating a GPRS attach(GSM 04.08). D. attGprsAttach E. A single integer value. F. SGSN Measurement Function. G. Valid for packet switching. B.8.1.4.2 Successful GPRS attach procedures A. This measurement provides the number of successfully performed GPRS attach procedures within this SGSN area. B. CC C. Transmission of a "ATTACH ACCEPT" message to the MS, indicating a GPRS only attached (GSM 04.08). D. succGprsAttach E. A single integer value. F. SGSN Measurement Function. G. Valid for packet switching. B.8.1.4.3 Attempt of combined GPRS/IMSI attach procedures A. This measurement provides the number of attempt of combined GPRS/IMSI attach procedures initiated within this SGSN area. B. CC C. Receipt of "ATTACH REQUEST" message from the MS, indicating combined GPRS/IMSI attach(GSM 04.08). D. attCombiAttach E. A single integer value. F. SGSN Measurement Function. G. Valid for packet switching. B.8.1.4.4 Successfully combined GPRS/IMSI attach procedures A. This measurement provides the number of successfully completed of Combined GPRS/IMSI attach procedures initiated within this SGSN area. B. CC C. Transmission of "ATTACH ACCEPT" message to the MS, indicating combined GPRS/IMSI attach(GSM 04.08). ETSI ETSI TS 100 615 V7.0.0 (2000-02) 98 (GSM 12.04 version 7.0.0 Release 1998) D. succCombiAttach E. A single integer value. F. SGSN Measurement Function. G. Valid for packet switching. B.8.1.4.5 Attempted GPRS attach procedures with IMSI already attached A. This measurement provides the number of attempted GPRS attach procedures,while IMSI is already attached. The attempts initiated within this SGSN area are counted. B. CC C. Receipt of "ATTACH REQUEST" Message from the MS, indicating GPRS attach while IMSI attached(GSM 04.08). D. attImsiAttach E. A single integer value. F. SGSN Measurement Function. G. Valid for packet switching. B.8.1.4.6 Successful GPRS attach procedures with IMSI already attached A. This measurement provides the number of successfully performed GPRS attach procedures,while IMSI is already attached. The attempts initiated within this SGSN area are counted. B. CC C Transmission of a "ATTACH ACCEPT" message to the MS, indicating a GPRS attach while IMSI attached (GSM 04.08). D succImsiAttach E A single integer value. F. SGSN Measurement Function G. Valid for packet switching. B.8.1.4.7 Number of attached subscriber A. This measurement provides the number of attached subscriber within this SGSN area. B. GAUGE C. The gauge will be incremented at transmission of a "ATTACH ACCEPT" message to the MS and will be decremented at transmission of a "DETACH ACCEPT" message to the MS (GSM 04.08). D. nbrOfAttachedSub E. A single integer value. F. SGSN Measurement Function. G. Valid for packet switching. B.8.1.4.8 Mean number of attached subscriber A. This measurement provides the arithmetic mean of the number of attached subscriber within this SGSN area. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 99 (GSM 12.04 version 7.0.0 Release 1998) B. GAUGE C. This measurement is obtained by sampling at a pre-defined interval (System designed), the number of subscribers which are attached and then taking the arithmetic mean (GSM 04.08). D. meanNbrOfAttachedSub E. A single integer value. F. SGSN Measurement Function. G. Valid for packet switching. B.8.1.4.9 Maximum number of attached subscriber A. This measurement provides the highest recorded value for the number of attached subscriber within this SGSN area. B. GAUGE C. This measurement is obtained by sampling at a pre-defined interval (System designed), the number of subscriber which are "attached", and then taking the maximum of all such values at the end of the granularity period, (GSM 04.08). D. maxNbrOfAttachedSub E. A single integer value. F. SGSN Measurement Function. G. Valid for packet switching. B.8.1.4.10 Attempted GPRS detach procedures initiated by MS A. This measurement provides the number of attempted GPRS detach procedures within this SGSN area. B. CC C. Receipt of "DETACH REQUEST" message from the MS, indicating a GPRS detach(GSM 04.08). D. attGprsDetachMs E. A single integer value. F. SGSN Measurement Function. G. Valid for packet switching. B.8.1.4.11 Attempt of Combined GPRS/IMSI detach procedures initiated by MS A. This measurement provides the number of attempted Combined GPRS/IMSI detach procedures MS-initiated within this SGSN area. B. CC C. Receipt of "DETACH REQUEST" message from the MS, indicating a Combined GPRS/IMSI detach(GSM 04.08). D. attCombiDetachMs E. A single integer value. F. SGSN Measurement Function. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 100 (GSM 12.04 version 7.0.0 Release 1998) G. Valid for packet switching. B.8.1.4.12 Attempt of IMSI detach procedures initiated by MS A. This measurement provides the number of attempted IMSI detach procedures MS-initiated within this SGSN area. B. CC C Receipt of "DETACH REQUEST" message from the MS, indicating a IMSI detach(GSM 04.08). D. attImsiDetachMS E. A single integer value. F. SGSN Measurement Function. G. Valid for packet switching. B.8.1.4.13 Attempted GPRS detach procedures initiated by SGSN A. This measurement provides the number of attempted GPRS detach procedures initiated by SGSN. B. CC C. Transmission of a "DETACH REQUEST" message to the MS(GSM 04.08). D. attGprsDetachSgsn E. A single integer value. F. SGSN Measurement Function. G. Valid for packet switching. B.8.1.4.14 Successful GPRS detach procedures initiated by SGSN A. This measurement provides the number of successfully completed GPRS detach procedures SGSN-initiated within this SGSN area. B. CC C. Receipt of "DETACH ACCEPT" message from the MS(GSM 04.08). D. succGprsDetachSgsn E. A single integer value. F. SGSN Measurement Function. G. Valid for packet switching. B.8.1.4.15 Attempted intra-SGSN Routing Area Update procedures initiated in this SGSN A. This measurement provides the number of attempted intra-SGSN Routing Area Update procedures initiated within this SGSN area. B. CC C. Receipt of a "ROUTING AREA UPDATE REQUEST" message from the MS, where the old RA and the new RA are served by this SGSN(GSM 04.08). D. attIntraSgsnRaUpdate ETSI ETSI TS 100 615 V7.0.0 (2000-02) 101 (GSM 12.04 version 7.0.0 Release 1998) E. A single integer value. F. SGSN Measurement Function. G. Valid for packet switching. B.8.1.4.16 Successful intra-SGSN Routing Area Update procedures initiated in this SGSN A. This measurement provides the number of successfully performed intra-SGSN Routing Area Update procedures initiated in this SGSN. B. CC C. Transmission of "ROUTING AREA UPDATE ACCEPT" message to the MS, GSM 04.08 [2]. D. succIntraSgsnRaUpdate E.: A single integer value. F. SGSN Measurement Function. G. Valid for packet switching. B.8.1.4.17 Attempted inter-SGSN Routing Area Update procedures initiated in this SGSN A. This measurement provides the number of attempted inter-SGSN Routing Area Update procedures initiated in this SGSN, where the old RA is served by another SGSN, GSM 04.08 [2]. B. CC C. Receipt of an "ROUTING AREA UPDATE REQUEST" message from the MS,GSM 04.08 [2]. D. attInterSgsnRaUpdate E. A single integer value. F. SGSN Measurement Function. G. Valid for packet switching. B.8.1.4.18 Successful inter-SGSN Routing Area Update procedures initiated in this SGSN A. This measurement provides the number of successfully completed inter-SGSN Routing Area Update procedures in this SGSN. B CC C. Receipt of a "ROUTING AREA UPDATE COMPLETE" message from the MS, GSM 04.08 [2].. D. succInterSgsnRaUpdate E. A single integer value. F. SGSN Measurement Function. G. Valid for packet switching. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 102 (GSM 12.04 version 7.0.0 Release 1998) B.8.1.5 Security B.8.1.5.1 Attempted P-TMSI reallocation procedures A. This measurement provides the number of attempted P-TMSI reallocation, or implicitly as part of the Location Updating, procedures in this SGSN. B. CC C. Transmission of "P-TMSI REALLOCATION COMMAND" message by the SGSN, GSM 04.08 [2]. D. attPTMSIRealloc E. A single integer value. F. SGSN Measurement Function. G. Valid for packet switching. B.8.1.5.2 Successful P-TMSI reallocation procedures A. This measurement provides the number of successfully performed P-TMSI reallocation procedures in this SGSN. B. CC C. Receipt of "P-TMSI REALLOCATION COMPLETE" message by the SGSN, GSM 04.08 [2]. D. succPTMSIRealloc E. A single integer value. F. SGSN Measurement Function. G. Valid for packet switching. B.8.1.5.3 Attempted requests for authentication sets sent to HLR by SGSN A. This measurement provides the number of number of attempted requests for authentication sets, sent to the HLR by SGSN, these are counted as attempts. B. CC C. Transmission of a "MAP SEND_AUTHENTICATION_INFO" service request, requesting authentication sets parameter "AuthenticationSetKind" present, GSM 09.02 [7] . D. attReqAuthSetsSentToHlrBySgsn E. A single integer value. F. SGSN Measurement Function. G. Valid for packet switching. B.8.1.5.4 Successful requests for authentication sets to HLR A. This measurement provides the number of successful requests for authentication sets that were sent from the HLR to the SGSN. B. CC C. Receipt of a "MAP SEND_AUTHENTICATION_INFO" service confirmation, containing requested authentication sets (parameter "AuthenticationSetList" present GSM 09.02 [7] ETSI ETSI TS 100 615 V7.0.0 (2000-02) 103 (GSM 12.04 version 7.0.0 Release 1998) D. succReqAuthSetsHlr E. A single integer value. F. SGSN Measurement Function. G. Valid for packet switching. B.8.1.5.5 Empty responses to the request for authentication sets to the HLR A. This measurement provides the number of empty responses to the request for authentication sets that were sent to the HLR. B: CC C. Receipt of a "MAP_SEND_AUTHENTICATION_INFO " service confirmation, no Authentication sets present, GSM 09.02 [7] D. emptyResponsesForAuthSetsFromHlr E. A single integer value. F. SGSN Measurement Function. G. Valid for packet switching. B.8.1.5.6 Attempt of authentication procedures started by SGSN A. This measurement provides the number of authentication procedures that are started within this SGSN area. B. CC C. Transmission of an "AUTHENTICATION AND CIPHERING REQUEST" message to the MS (GSM 04.08). D. attAuthInSgsn E. A single integer value. F. SGSN Measurement Function. G. Valid for packet switching. B.8.1.5.7 Successful authentication procedures started by the SGSN A. This measurement provides the number of successful authentication procedures within this SGSN area. B. CC C. Receipt of an "AUTHENTICATION AND CIPHERING RESPONSE" message from the MS, where the receipt SRES parameter value matches the value stored in the SGSN (GSM 04.08). D. succAuthInSgsn E. A single integer value. F. SGSN Measurement Function. G_. Valid for packet switching. B.8.1.5.8 Attempted Identity Request procedures A. This measurement provides the number of attempted Identity Request procedures initiated by this SGSN. B. CC ETSI ETSI TS 100 615 V7.0.0 (2000-02) 104 (GSM 12.04 version 7.0.0 Release 1998) C. Transmission of an "IDENTITY REQUEST" message to the MS (GSM 04.08). D. attIdentityReq E. A single integer value. F. SGSN Measurement Function. G_. Valid for packet switching. B.8.1.5.9 Successful Identity Request procedures A. This measurement provides the number of successfully completed Identity Request procedures initiated by this SGSN. B. CC C. Receipt of an "IDENTITY RESPONSE" message with IMSI by the SGSN from the MS(GSM 04.08). D. succIdentityReq E. A single integer value. F. SGSN Measurement Function. G. Valid for packet switching. B.8.1.5.10 Attempted ciphering mode control procedures A. This measurements provides the number of ciphering mode control procedures initiated in the SGSN. B. CC C. Transmission of "CIPHER MODE COMMAND" (GSM 08.08). D. attCipheringModeControlPerSgsn E. A single integer value. F. SGSN Measurement Function. G. Valid for packet switching. B.8.1.5.11 Successful ciphering mode control procedures A. This measurement provides the number of successfully completed ciphering mode control procedures that were initiated in this SGSN. B. CC C. Receipt of "CIPHER MODE COMPLETE" Message (GSM 08.08). D. succCipheringModeControlPerSgsn E. A single integer value. F. SGSN Measurement Function. G. Valid for packet switching. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 105 (GSM 12.04 version 7.0.0 Release 1998) B.8.1.6 State B.8.1.6.1 Number of subscribers in the SGSN in STANDBY state. A. This measurement provides the number of subscribers in 'STANDBY' state within this SGSN area. B. GAUGE C. Transition of a GPRS subscriber registered in the SGSN into / from the operational state 'STANDBY'. D. nbrOfSubStandby E. A single integer value. F. SGSN Measurement Function. G. Valid for packet switching. B.8.1.6.2 Mean number of subscribers in the SGSN in STANDBY state. A. This measurement provides the arithmetic mean of the number of subscriber in 'STANDBY' state within this SGSN area. B. SI C. This measurement is obtained by sampling at a pre-defined interval (System designed), the number of subscribers in the STANDBY state, and then taking the arithmetic mean. D. meanNbrOfSubStandby E. A single integer value. F. SGSN Measurement Function. G. Valid for packet switching. B.8.1.6.3 Maximum number of subscribers in the SGSN in STANDBY state. A. This measurement provides the highest recorded value for number of subscribers in 'STANDBY' state within this SGSN area. B. GAUGE C. This measurement is obtained by comparing on an update of the actual number of subscribers in the STANDBY state, this value with the currently maximal value within the actual granularity period. D. maxNbrOfSubStandby E. A single integer value. F. SGSN Measurement Function. G. Valid for packet switching. B.8.1.6.4 Number of subscribers in the SGSN in READY state A. This measurement provides the number of subscribers in 'READY' state within this SGSN area. B. GAUGE C. Transition of a GPRS subscriber registered in the SGSN into / from the operational state 'READY'. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 106 (GSM 12.04 version 7.0.0 Release 1998) D. nbrOfSubReady E. A single integer value. F. SGSN Measurement Function. G. Valid for packet switching. B.8.1.6.5 Mean number of subscribers in the SGSN in READY state A. This measurement provides the arithmetic mean of the number of subscriber in 'READY' state within this SGSN area. B. SI C. This measurement is obtained by sampling at a pre-defined interval (System design), the number of subscribers in the READY state, and then taking the arithmetic mean. D. meanNbrOfSubReady E. A single integer value. F. SGSN Measurement Function. G. Valid for packet switching. B.8.1.6.6 Maximum number of subscribers in the SGSN in READY state A. This measurement provides the highest recorded value for number of subscribers in 'READY' state within this SGSN area. B. GAUGE C. This measurement is obtained by comparing on an update of the actual number of subscribers in the READY state, this value with the currently maximal value within the actual granularity period. D. maxNbrOfSubReady E. A single integer value. F. SGSN Measurement Function. G. Valid for packet switching. B.8.1.7 Equipment B.8.1.7.1 Number of transmitted check IMEI requests A. This measurement provides the number of check IMEI requests sent to the EIR. B. CC C. Transmission of "MAP_IMEI_CHECK" service request (GSM 09.02 [7]) D.: nbrOfCheckIMEIRequest E. A single integer value. F. SGSN Measurement Function. G.: Valid for packet switching. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 107 (GSM 12.04 version 7.0.0 Release 1998) B.8.1.7.2 Number of white answers in SGSN A. This measurement provides the number of white list answers received from the EIR. B. CC C. Receipt of "MAP_IMEI_CHECK" service confirmation with parameter "equipment status" referring to the white listed equipment.(GSM 09.02, and GSM 02.16). D. nbrOfWhiteAnswerInSgsn E. A single integer value. F. SGSN Measurement Function. G. Valid for packet switching. B.8.1.7.3 Number of grey answers in SGSN A. This measurement provides the number of grey list answers received from the EIR. B. CC C. Receipt of "MAP_IMEI_CHECK" service confirmation with parameter "equipment status" referring to the grey listed equipment.(GSM 09.02, and GSM 02.16) D. nbrGreyAnswerInSgsn E. A single integer value. F. SGSN Measurement Function. G. Valid for packet switching. B.8.1.7.4 Number of black answers in SGSN A. This measurement provides the number of black list answers received from the EIR. B. CC C.: Receipt of "MAP_IMEI_CHECK" service confirmation with parameter "equipment status" referring to the black listed equipment.(GSM 09.02, and GSM 02.16) D. nbrOfBlackAnswerInSgsn E. A single integer value. F. SGSN Measurement Function. G. Valid for packet switching. B.8.1.7.5 Number of unknown IMEI answers A. This measurement provides the number of unknown IMEI answers received from the EIR. B. CC C. Receipt of "MAP_IMEI_CHECK" service confirmation with parameter "equipment status" referring to unknown equipment.(GSM 09.02) D. nbrOfUnknownAnswerInSgsn E. A single integer value. F. SGSN Measurement Function. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 108 (GSM 12.04 version 7.0.0 Release 1998) G. Valid for packet switching. B.8.1.8 RRM Measurements B.8.1.8.1 Attempt of packet switched paging procedures A. This measurement provides the number of attempted packet switched paging procedures, for GPRS services, within this SGSN area. The initial paging procedures as well the repeated paging procedures are counted. B. CC C. Transmission of "GMM-PAGING.req" message (GSM 08.18). D. attPacketSwitchingPaging E. A single integer value. F. SGSN Measurement Function. G. Valid for packet switching. B.8.1.8.2 Unsuccessful packet switched paging procedures A. This measurement provides the number of unsuccessfull packet switched paging (GPRS) procedures within this SGSN area, i.e. packed switching paging procedures that are re-started when the previous attempt has timed out. B. CC C. Receipt of timeout for the "GMM-PAGING.req" message (GSM TS 08.18). D. unsuccPacketSwitchingPaging E. A single integer value. F. SGSN Measurement Function. G. Valid for packet switching. B.8.1.8.3 Attempt of packet switched paging procedures per Routing Area A. This measurement provides the number of attempted packet switched paging procedures, for GPRS services, within this Routing Area. The initial paging procedures as well the repeated paging procedures are counted. B. CC C. Transmission of "GMM-PAGING.req" message (GSM 08.18). D. attPsPagingPerRoutingArea E. A single integer value per Routing Area. F. SGSN Measurement Function. G.: Valid for packet switching. B.8.1.8.4 Unsuccessful packet switched paging procedures per Routing Area A. This measurement provides the number of unsuccessfull packet switched paging (GPRS) procedures within this Routing Area, i.e. packed switching paging procedures that are re-started when the previous attempt has timed out. B. CC ETSI ETSI TS 100 615 V7.0.0 (2000-02) 109 (GSM 12.04 version 7.0.0 Release 1998) C. Receipt of timeout for the "GMM-PAGING.req" message (GSM TS 08.18). D. unsuccPsPagingPerRoutingArea E. A single integer value per Routing Area. F. SGSN Measurement Function. G.: Valid for packet switching. B.8.1.9 SM Measurements B.8.1.9.1 Attempted PDP context activation procedures initiated by MS A. This measurement provides the number of attempted PDP context activation procedures. These include the static as well as the dynamic PDP addresses. B. CC C. Receipt of a "Activate PDP Context Request" message from the MS (GSM TS 04.08). D. attActPdpContextMSPerSgsn E. A single integer value. F. SGSN Measurement Function. G.: Valid for packet switching. B.8.1.9.2 Successful PDP context activation procedures initiated by MS A. This measurement provides the number of successfully completed PDP context activations. For these context activations, the GGSN is updated successfully. B. CC C. Transmission of a "Activate PDP Context Accept" message to the MS (GSM TS 04.08). D.: succActPdpContextMSPerSgsn E. A single integer value. F. SGSN Measurement Function. G. Valid for packet switching. B.8.1.9.3 Attempted dynamic PDP context activation procedures initiated by MS A. This measurement provides the number of attempted PDP context activation requests where a dynamic PDP address is required to be used. B. CC C. Receipt of a "Activate PDP Context Request" message from the MS with an empty PDP address (GSM TS 04.08). D. attActPdpContextDynMSPerSgsn E. A single integer value. F. SGSN Measurement Function. G. Valid for packet switching. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 110 (GSM 12.04 version 7.0.0 Release 1998) B.8.1.9.4 Successful dynamic PDP context activation procedures initiated by MS A. This measurement provides the number of successfully completed PDP context activations where a dynamic PDP address is used. B. CC C. Transmission of a "Activate PDP Context Accept" message to the MS (GSM TS 04.08) when the PDP address has been dynamically assigned. D. succActPdpDynContextDynMsPerSgsn E. A single integer value. F. SGSN Measurement Function. G. Valid for packet switching. B.8.1.9.5 Attempted PDP context deactivation procedures initiated by the MS A. This measurement provides the number of PDP context deactivation procedures. B. CC C. Receipt of a "Deactivate PDP Context Request" message from the MS (GSM TS 04.08) D. attDeactPdpContextMsPerSgsn E. A single integer value. F. SGSN Measurement Function. G. Valid for packet switching. B.8.1.9.6 Successful PDP context deactivation procedures initiated by the MS A. This measurement provides the number of successfully completed PDP context deactivations. For these context deactivations, the GGSN is updated successfully (i.e. deletion of the PDP context). B. CC C. Transmission of a "Deactivate PDP Context Accept" message to the MS (GSM TS 04.08). D. succDeactPdpContextMsPerSgsn E. A single integer value. F. SGSN Measurement Function. G. Valid for packet switching. B.8.1.9.7 Attempted PDP context deactivation procedures initiated by the GGSN A. This measurement provides the number of PDP context deactivation procedures initiated by the GGSN. B. CC C. Receipt of a "Delete PDP Context Request" message from the GGSN (GSM TS 09.60). D. attDeactPdpContextGgsnPerSgsn E. A single integer value. F. SGSN Measurement Function. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 111 (GSM 12.04 version 7.0.0 Release 1998) G. Valid for packet switching. B.8.1.9.8 Successful PDP context deactivation procedures initiated by the GGSN A. This measurement provides the number of successfully handled PDP context deactivations initiated by the GGSN. For these context deactivations, the MS has accepted the PDP context deactivation. B. CC C. Transmission of a "Delete PDP Context Response" message to the GGSN (GSM TS 09.60). D. succDeactPdpContextGgsnPerSgsn E. A single integer value. F. SGSN Measurement Function. G Valid for packet switching. B.8.1.9.9 Number of subscribers with activated PDP context in SGSN A. This measurement provides the number of mobile subscribers with activated PDP context (i.e. subscribers that can send/receive GPRS packet data). B. GAUGE C. Addition of first PDP context or removal of last PDP context in SGSN location register for a perticular subscriber. D. nbrSubsWithActivePdpInSgsn E. A single integer value. F. SGSN Measurement Function. G.: Valid for packet switching. B.8.1.9.10 Mean number of subscribers with activated PDP context in SGSN A. This measurement provides the arithmetic mean number value of subscribers that have activated PDP context (i.e. subscribers that can send/receive GPRS packet data). B. SI C. This measurement is obtained by sampling at a pre-defined interval (System design), the number of subscribers with activated PDP context in SGSN, and then taking the arithmetic mean. D. meanSubsWithActivePdpInSgsn E. A single integer value. F. SGSN Measurement Function. G. Valid for packet switching. B.8.1.9.11 Maximum number of subscribers with activated PDP context in SGSN A. This measurement provides the highest recorded value for number of subscribers with activated PDP contexts (i.e. subscribers that can send/receive GPRS packet data). B. GAUGE ETSI ETSI TS 100 615 V7.0.0 (2000-02) 112 (GSM 12.04 version 7.0.0 Release 1998) C. This measurement is obtained by comparing on an update of the actual number of subscribers with activated PDP context in SGSN, this value with the currently maximal value within the actual granularity period. D. maxSubsWithActivePdpInSgsn E. A single integer value. F. SGSN Measurement Function. G. Valid for packet switching. B.9 Measurements Related to the GGSN B.9.1 GGSN Measurement Function B.9.1.1 Number of PDP context activation procedures initiated by the MS Per APN A. This measurement provides the number of PDP context activation procedures initiated by the MS on a per APN of the GGSN. B. CC C. Receipt of a "Create PDP Context Request" message from the SGSN(GSM TS 09.60). D. attActPdpContextPerApnOfGgsn E. A single integer value. F. GGSN Measurement Function. G. Valid for packet switching. B.9.1.2 Successful PDP context activation procedures initiated by the MS Per APN A. This measurement provides the number of successfully completed activation PDP context procedures initiated by the MS on a per APN of the GGSN. B. CC C.: Transmission of "Create PDP Context Response" from GGSN (GSM TS 09.60). D.: succActPdpContextPerApnOfGgsn E. A single integer value. F. GGSN Measurement Function. G_. Valid for packet switching. B.9.1.3 Number of dynamic PDP context activation procedures initiated by the MS Per APN A. This measurement provides the number of dynamic PDP context activation procedures initiated by the MS where a dynamic PDP address is requested on a per APN of the GGSN. B. CC C. Receipt of a "Create PDP Context Request" message MS with an empty PDP address (GSM TS 09.60). ETSI ETSI TS 100 615 V7.0.0 (2000-02) 113 (GSM 12.04 version 7.0.0 Release 1998) D. attActPdpContextDynPerApnOfGgsn E. A single integer value. F. GGSN Measurement Function. G. Valid for packet switching. B.9.1.4 Successful +dynamic PDP context activation procedures initiated by the MS Per APN A. This measurement provides the number of successfully attempted dynamic PDP context activation procedures initiated by the MS where a dynamic PDP address is requested on a per APN of the GGSN. B. CC C. Transmission of "Create PDP Context Response" from GGSN (GSM TS 09.60) , the PDP address has been dynamically assigned. D. succActPdpContextDynPerApnOfGgsn E. A single integer value. F. GGSN Measurement Function. G. Valid for packet switching. B.9.1.5 Number of PDP context deactivation procedures initiated by the MS Per APN A. This measurement provides the number of PDP context deactivation procedures initiated by the MS on a per APN of the GGSN. B. CC C. Receipt of a "Delete PDP Context Request" message from the SGSN (GSM TS 09.60) D. attDeactPdpContextPerApnOfGgsn E. A single integer value. F. GGSN Measurement Function. G. Valid for packet switching. B.9.1.6 Successful PDP context deactivation procedures initiated by the MS Per APN A. This measurement provides the number of successfully completed PDP context deactivation procedures initiated by the MS on a per APN of the GGSN. B. CC C. Transmission of a "Delete PDP Context Response" message to the SGSN (GSM TS 09.60). D. succDeactPdpContextPerApnOfGgsn E. A single integer value. F. GGSN Measurement Function. G. Valid for packet switching. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 114 (GSM 12.04 version 7.0.0 Release 1998) B.9.1.7 Number of PDP context deactivation procedures initiated by the GGSN Per APN A. This measurement provides the number of PDP context deactivation procedures initiated by the GGSN, on a per APN of the GGSN. B. CC C. Transmission of a "Deactivate PDP Context Request" message to the SGSN (GSM TS 09.60). D. attDeactPdpContextByGgsnPerApn E. A single integer value. F. GGSN Measurement Function. G. Valid for packet switching. B.9.1.8 Successful PDP context deactivation procedures initiated by the GGSN Per APN A. This measurement provides the number of successfully completed PDP context deactivation procedures initiated by the GGSN, on a per APN of the GGSN. B. CC C. Receipt of "Delete PDP Context Response" message from the SGSN (GSM TS 09.60). D.: succDeactPdpContextByGgsnPerApn E. A single integer value. F. GGSN Measurement Function. G. Valid for packet switching. B.9.1.9 Number of active PDP context in GGSN Per APN A. This measurement provides the number of active PDP context in this GGSN. B. GAUGE C. Addition or removal of a PDP context in GGSN. D.: nbrOfActivePdpContextsPerApnAtGgsn E. A single integer value. F. GGSN Measurement Function. G. Valid for packet switching. B.9.1.10 Mean number of active PDP context in GGSN Per APN A. This measurement is obtained by sampling at a pre-defined interval (System designed), the number of active PDP context in GGSN per APN, and then taking the arithmetic mean. B. SI C. Addition or removal of a PDP context in GGSN. D. meanNbrOfActivePdpContextsPerApnAtGgsn ETSI ETSI TS 100 615 V7.0.0 (2000-02) 115 (GSM 12.04 version 7.0.0 Release 1998) E. A single integer value. F. GGSN Measurement Function. G. Valid for packet switching. B.9.1.11 Maximum number of PDP context in GGSN Per APN A. This measurement is obtained by comparing on an update of the actual number of active PDP context in GGSN per APN, this value with the currently maximal value within the actual granularity period. B_. GAUGE C. Addition a PDP context in GGSN. D. maxnbrOfActivePdpContextsPerApnAtGgsn E. A single integer value. F. GGSN Measurement Function. G. Valid for packet switching. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 116 (GSM 12.04 version 7.0.0 Release 1998) Annex C (normative): Performance Measurement Object Model This annex to GSM 12.04 comprises the Object Model for Performance Measurement to complement the high level Object Model in GSM 12.00 [8]. The whole management approach defined in GSM 12.00 [8] defines all entities of GSM network as managed functions. These are BSS, MSC, HLR etc. and one or more of these can be contained in managed element and each of these functions can contain it's own measurement function. The SGSN and GGSN detailed, are additional to GSM 12.00 [8] due to the introduction of GPRS. Model Structure and Content The following measurement function model takes its basis from the proposed GSM 12.00 [8] high level model. Figure C.1: below shows the containment tree of all the measurement Object Classes. The formal GDMO definitions of the Managed Object Classes concerning measurement functions are described in this subclause, except the "log", which is described in annex D under data transfer requirements. simpleScanner eir measurement Function btsSiteManager cell measurement Function internalHdo measurement Function bts hlr measurement Function hlrFunction bssFunction eirFunction vlrFunction vlr measurement Function mscFunction msc measurement Function externalHdo measurement Function smsc measurement Function smscFunction simpleScanner bsc measurement Function bsc simpleScanner simpleScanner simpleScanner simpleScanner simpleScanner managedElement efd log sgsn measurement Function sgsnFunction simpleScanner ggsn measurement Function ggsnFunction Figure C.1: GSM 12.04 Performance Measurement Object Class Containment ETSI ETSI TS 100 615 V7.0.0 (2000-02) 117 (GSM 12.04 version 7.0.0 Release 1998) C.1 Measurement Managed Object Classes C.1.1 object class from CCITT ISO The object class used by the present document is the simple scanner, as defined in [ISO 10164-13]. Within the realm of the present document, each "simpleScanner" instance is only required to scan attributes of "measurementFunction" objects that are contained in the same "xxxFunction" object as the "simpleScanner" itself, where "xxx" stands for "bss", "msc", "hlr", "vlr", "eir", "sgsn", "ggsn" or "smsc", respectively (see containment tree diagram on previous page). C.1.2 bscMeasurementFunction bscMeasurementFunction MANAGED OBJECT CLASS DERIVED FROM "Recommendation X.721: 1992": top; CHARACTERIZED BY basicMeasurementFunctionPackage; CONDITIONAL PACKAGES requestForServicePackage PRESENT IF "an instance supports it", requestForServicePerCausePackage PRESENT IF "an instance supports it", interArrivalTimePackage PRESENT IF "an instance supports it", pagingMessagePerBSCPackage PRESENT IF "an instance supports it", immediateAssignmentProceduresPerBSCPackage PRESENT IF "an instance supports it", internalHandoversIntraCellPerBSCPackage PRESENT IF "an instance supports it", internalHandoversPerBSCPackage PRESENT IF "an instance supports it", internalHandoversPerCausePackage PRESENT IF "an instance supports it", internalHandoverFailuresPerBSCPackage PRESENT IF "an instance supports it", gprsPDUFlushReqPackage PRESENT IF "an instance supports it", gprsPagingRequestPackage PRESENT IF "an instance supports it", gprsInterArrivalPackage PRESENT IF "an instance supports it"; REGISTERED AS {gsm1204managedobjectClass 121}; C.1.3 cellMeasurementFunction cellMeasurementFunction MANAGED OBJECT CLASS DERIVED FROM "Recommendation X.721: 1992": top; CHARACTERIZED BY basicMeasurementFunctionPackage; CONDITIONAL PACKAGES pchagchQueuePackage PRESENT IF "an instance supports it", pagingMess ETSI ETSI TS 100 615 V7.0.0 (2000-02) 118 (GSM 12.04 version 7.0.0 Release 1998) agePackage PRESENT IF "an instance supports it", immediateAssignmentProceduresPackage PRESENT IF "an instance supports it", immediateAssignmentProceduresPerCausePackage PRESENT IF "an instance supports it", pageDiscardPackage PRESENT IF "an instance supports it", durationOfPagingProceduresPackage PRESENT IF "an instance supports it", tchAvailablePackage PRESENT IF "an instance supports it", tchBusyPackage PRESENT IF "an instance supports it", idleTCHsPerInterferenceBandPackage PRESENT IF "an instance supports it", tchSeizuresPackage PRESENT IF "an instance supports it", tchAllocatedTimePackage PRESENT IF "an instance supports it", tchBusyTimePackage PRESENT IF "an instance supports it", tchQueuePackage PRESENT IF "an instance supports it", lostRadioLinksPerTCHPackage PRESENT IF "an instance supports it", sdcchAvailablePackage PRESENT IF "an instance supports it", sdcchBusyPackage PRESENT IF "an instance supports it", sdcchSeizuresPackage PRESENT IF "an instance supports it", sdcchAllocatedTimePackage PRESENT IF "an instance supports it", sdcchQueuePackage PRESENT IF "an instance supports it", lostRadioLinksPerSDCCHPackage PRESENT IF "an instance supports it", downlinkPowerControlPackage PRESENT IF "an instance supports it", uplinkPowerControlPackage PRESENT IF "an instance supports it", internalHandoversIntraCellPackage PRESENT IF "an instance supports it", incomingInternalInterCellHandoversPackage PRESENT IF "an instance supports it", outgoingInternalInterCellHandoversPackage PRESENT IF "an instance supports it", internalHandoverFailurePackage PRESENT IF "an instance supports it", gprsPDCHAvailablePackage PRESENT IF "an instance supports it", gprsPDCHOccupiedPackage PRESENT IF "an instance supports it", gprsPDCHAllocatedPackage PRESENT IF "an instance supports it", gprsPCCCHPagingPackage PRESENT IF "an instance supports it", ETSI ETSI TS 100 615 V7.0.0 (2000-02) 119 (GSM 12.04 version 7.0.0 Release 1998) gprsPPCHQueueOnPCCCHPackage PRESENT IF "an instance supports it", gprsPDTCHAssignmentPackage PRESENT IF "an instance supports it", gprsPDTCHQueuePackage PRESENT IF "an instance supports it", gprsCSChangePackage PRESENT IF "an instance supports it"; REGISTERED AS {gsm1204managedobjectClass 131}; C.1.4 internalHdoMeasurementFunction internalHdoMeasurementFunction MANAGED OBJECT CLASS DERIVED FROM "Recommendation X.721: 1992": top; CHARACTERIZED BY basicMeasurementFunctionPackage, internalHdoMeasurementFunctionPackage; CONDITIONAL PACKAGES incomingInternalInterCellPerCellHandoversPackage PRESENT IF "an instance supports it", outgoingInternalInterCellPerCellHandoversPackage PRESENT IF "an instance supports it"; REGISTERED AS {gsm1204managedobjectClass 140}; internalHdoMeasurementFunctionPackage PACKAGE BEHAVIOUR internalHdoMeasurementFunctionBehaviour; ATTRIBUTES "gsm1220: 1993": adjacentCellId GET; REGISTERED AS {gsm1204package 140}; internalHdoMeasurementFunctionBehaviour BEHAVIOUR DEFINED AS "This object is defined to contain the various optional measurement packages and will exist in multiple instances. Creation is only allowed if the value of the adjacent cell attribute is identical to the value of the adjacent cell attribute in one of the <HDO adjacent Cell> objects. There can be one or more instance(s) of the HDO measurement function for each created instance of <HDO adjacent cell> MOC. If the adjacent Cell Object is re-named or deleted during the lifetime of the internalHdoMeasurementFunction of its associated internalHdoMeasurementFunction then the corresponding internalHdoMeasurementFunction(s) is/are automatically deleted, as the adjacent Cell Attribute of the mesurementFunction shall not be changeable. The scanner may scan attributes of the object class in various combinations and permutations of packages, and further may scan simultaneously as many times as necessary within the processing limits of the network." ; C.1.5 mscMeasurementFunction mscMeasurementFunction MANAGED OBJECT CLASS DERIVED FROM "Recommendation X.721: 1992": top; CHARACTERIZED BY basicMeasurementFunctionPackage; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 120 (GSM 12.04 version 7.0.0 Release 1998) CONDITIONAL PACKAGES classMarkPackage PRESENT IF "an instance supports it", mobileOriginatingCallsPackage PRESENT IF "an instance supports it", mobileTerminatingCallsPackage PRESENT IF "an instance supports it", mobileEmergencyCallsPackage PRESENT IF "an instance supports it", cipheringModePackage PRESENT IF "an instance supports it", interrogatingHLRPackage PRESENT IF "an instance supports it", mobileOriginatingPointToPointSMPackage PRESENT IF "an instance supports it", mobileTerminatingPointToPointSMPackage PRESENT IF "an instance supports it", imeiRequestPackage PRESENT IF "an instance supports it", whiteAnswersInMSCPackage PRESENT IF "an instance supports it", greyAnswersInMSCPackage PRESENT IF "an instance supports it", blackAnswersInMSCPackage PRESENT IF "an instance supports it", unknownIMEIAnswersInMSCPackage PRESENT IF "an instance supports it", callSetupServicePackage PRESENT IF "an instance supports it", locationUpdatingServicePackage PRESENT IF "an instance supports it", subscriberIdentifiedWithTMSIPackage PRESENT IF "an instance supports it", subscriberIdentifiedWithIMSIPackage PRESENT IF "an instance supports it", tmsiReallocationsPackage PRESENT IF "an instance supports it", imsiDetachAttachProceduresPackage PRESENT IF "an instance supports it", incomingExternalIntraMSCHandoversPackage PRESENT IF "an instance supports it", outgoingExternalIntraMSCHandoversPackage PRESENT IF "an instance supports it", incomingInterMSCHandoversPackage PRESENT IF "an instance supports it", outgoingInterMSCHandoversPackage PRESENT IF "an instance supports it", subsequentInterMSCHandoversToMACaPackage PRESENT IF "an instance supports it", subsequentInterMSCHandoversToMACcPackage PRESENT IF "an instance supports it", externalHandoversPackage PRESENT IF "an instance supports it", externalHandoversPerCausePackage PRESENT IF "an instance supports it", externalHandoverFailurePerMSCPackage PRESENT IF "an instance supports it"; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 121 (GSM 12.04 version 7.0.0 Release 1998) REGISTERED AS {gsm1204managedobjectClass 150}; C.1.6 externalHdoMeasurementFunction externalHdoMeasurementFunction MANAGED OBJECT CLASS DERIVED FROM "Recommendation X.721: 1992": top; CHARACTERIZED BY basicMeasurementFunctionPackage, externalHdoMeasurementFunctionPackage; CONDITIONAL PACKAGES incomingExternalIntraMSCHandoversPerCellPackage PRESENT IF "an instance supports it", outgoingExternalIntraMSCHandoversPerCellPackage PRESENT IF "an instance supports it", incomingExternalInterMSCHandoversPerCellPackage PRESENT IF "an instance supports it", outgoingExternalInterMSCHandoversPerCellPackage PRESENT IF "an instance supports it"; REGISTERED AS {gsm1204managedobjectClass 160}; externalHdoMeasurementFunctionPackage PACKAGE BEHAVIOUR externalHdoMeasurementFunctionBehaviour; ATTRIBUTES observedCell GET, adjacentCell GET; REGISTERED AS {gsm1204package 160} ; externalHdoMeasurementFunctionBehaviour BEHAVIOUR DEFINED AS "This object is defined to contain the various optional measurement packages and will exist in multiple instances. It can only be instantiated if the cell attribute belongs to the msc area which is served by the msc function that contain the external HDO measurement function. The scanner may scan attributes of the object class in various combinations and permutations of packages, and further may scan simultaneously as many times as necessary within the processing limits of the network."; C.1.7 hlrMeasurementFunction hlrMeasurementFunction MANAGED OBJECT CLASS DERIVED FROM "Recommendation X.721: 1992": top; CHARACTERIZED BY basicMeasurementFunctionPackage; CONDITIONAL PACKAGES msRoamingOutsideHPLMNPackage PRESENT IF "an instance supports it", authenticationSetsHLRToVLRPackage PRESENT IF "an instance supports it", insertSubscriberDataServicePackage PRESENT IF "an instance supports it", locationUpdatePackage PRESENT IF "an instance supports it", ETSI ETSI TS 100 615 V7.0.0 (2000-02) 122 (GSM 12.04 version 7.0.0 Release 1998) ssRelatedOperationsInHLRPackage PRESENT IF "an instance supports it", requestForSMRoutingPackage PRESENT IF "an instance supports it", smDeliveryStatusReportProceduresPackage PRESENT IF "an instance supports it", sendAlertsPackage PRESENT IF "an instance supports it", requestForMSRNPackage PRESENT IF "an instance supports it"; REGISTERED AS {gsm1204managedobjectClass 170}; C.1.8 vlrMeasurementFunction vlrMeasurementFunction MANAGED OBJECT CLASS DERIVED FROM "Recommendation X.721: 1992": top; CHARACTERIZED BY basicMeasurementFunctionPackage; CONDITIONAL PACKAGES msMemoryAvailableNotificationsPackage PRESENT IF "an instance supports it", identificationRequestToPVLRPackage PRESENT IF "an instance supports it", pageRequestPackage PRESENT IF "an instance supports it", pageRequestPerLocationAreaPackage PRESENT IF "an instance supports it", authenticationSetsVLRToHLRPackage PRESENT IF "an instance supports it", authenticationInVLRPackage PRESENT IF "an instance supports it", intraVLRLocationUpdatePackage PRESENT IF "an instance supports it", interVLRLocationUpdatePackage PRESENT IF "an instance supports it", visitorsFromOtherPLMNPackage PRESENT IF "an instance supports it"; REGISTERED AS {gsm1204managedobjectClass 180}; C.1.9 eirMeasurementFunction eirMeasurementFunction MANAGED OBJECT CLASS DERIVED FROM "Recommendation X.721: 1992": top; CHARACTERIZED BY basicMeasurementFunctionPackage; CONDITIONAL PACKAGES receivedIMEIcheckRequestPackage PRESENT IF "an instance supports it", whiteAnswersInEIRPackage PRESENT IF "an instance supports it", greyAnswersInEIRPackage PRESENT IF "an instance supports it", blackAnswersInEIRPackage PRESENT IF "an instance supports it", unknownIMEIAnswersInEIRPackage PRESENT IF "an instance supports it"; REGISTERED AS {gsm1204managedobjectClass 190}; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 123 (GSM 12.04 version 7.0.0 Release 1998) C.1.10 smsMeasurementFunction smsMeasurementFunction MANAGED OBJECT CLASS DERIVED FROM "Recommendation X.721: 1992": top; CHARACTERIZED BY basicMeasurementFunctionPackage; CONDITIONAL PACKAGES mobileOriginatingSMForwardingPackage PRESENT IF "an instance supports it", mobileTerminatingSMForwardingPackage PRESENT IF "an instance supports it"; REGISTERED AS {gsm1204managedobjectClass 1101}; C.1.11 sgsnMeasurementFunction sgsnMeasurementFunction MANAGED OBJECT CLASS DERIVED FROM "Recommendation X.721: 1992": top; CHARACTERIZED BY basicMeasurementFunctionPackage; CONDITIONAL PACKAGES sgsnLLCPackage PRESENT IF "an instance supports it", sgsnSNDCPPackage PRESENT IF "an instance supports it", gprsAttachPackage PRESENT IF "an instance supports it", gprsIMSIAttachPackage PRESENT IF "an instance supports it", gprsIMSIAlreadyAttachedPackage PRESENT IF "an instance supports it", gprsAttachedSubscribersPackage PRESENT IF "an instance supports it", gprsMSDetachPackage PRESENT IF "an instance supports it", gprsSGSNDetachPackage PRESENT IF "an instance supports it", gprsRouting AreaUpdatePackage PRESENT IF "an instance supports it", pTMSIReallocationPackage PRESENT IF "an instance supports it", sgsnHLRAuthenticationPackage PRESENT IF "an instance supports it", sgsnAuthenticationProcPackage PRESENT IF "an instance supports it", sgsnIdentityRequestPackage PRESENT IF "an instance supports it", sgsnCipheringModePackage PRESENT IF "an instance supports it", gprsSubsStandbyStatePackage PRESENT IF "an instance supports it", gprsSubsReadyStatePackage PRESENT IF "an instance supports it", ETSI ETSI TS 100 615 V7.0.0 (2000-02) 124 (GSM 12.04 version 7.0.0 Release 1998) sgsnIMEICheckRequestsPackage PRESENT IF "an instance supports it", whiteAnswersInSGSNPackage PRESENT IF "an instance supports it", greyAnswersInSGSNPackage PRESENT IF "an instance supports it", blackAnswersInSGSNPackage PRESENT IF "an instance supports it", unknownIMEIAnswersInSGSNPackage PRESENT IF "an instance supports it", sgsnPacketSwitched PagingPackage PRESENT IF "an instance supports it", sgsnPacketSwitched PagingPerRAPackage PRESENT IF "an instance supports it", sgsnPDPContextActivationByMSPackage PRESENT IF "an instance supports it", sgsnDynamicPDPContextActivationByMSPackage PRESENT IF "an instance supports it", sgsnPDPContextDeactivationByMSPackage PRESENT IF "an instance supports it", sgsnPDPContextDeactivationByGGSNPackage PRESENT IF "an instance supports it", subscriberPDPContextsInSGSNPackage PRESENT IF "an instance supports it"; REGISTERED AS {gsm1204managedobjectClass 1110}; C.1.12 ggsnMeasurementFunction ggsnMeasurementFunction MANAGED OBJECT CLASS DERIVED FROM "Recommendation X.721: 1992": top; CHARACTERIZED BY basicMeasurementFunctionPackage; CONDITIONAL PACKAGES ggsnPDPContextActivationByMSPackage PRESENT IF "an instance supports it", ggsnDynamicPDPContextActivationByMSPackage PRESENT IF "an instance supports it", ggsnPDPContextDeactivationByMSPackage PRESENT IF "an instance supports it", ggsnPDPContextDeactivationByGGSNPackage PRESENT IF "an instance supports it", ActivePDPContextsAtGGSNPackage PRESENT IF "an instance supports it"; REGISTERED AS {gsm1204managedobjectClass 1120} C.2 Measurement Package Definitions The following describes the individual measurements defined in GSM 12.04, annex B, as packages of attributes to be referenced by the appropriate managed object class. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 125 (GSM 12.04 version 7.0.0 Release 1998) C.2.1 General Measurement Function Packages C.2.1.1 basicMeasurementFunctionPackage basicMeasurementFunctionPackage PACKAGE BEHAVIOUR generalMeasurementFunctionBehaviour; ATTRIBUTES measurementFunctionId GET; NOTIFICATIONS "Recommendation X.721: 1992": objectCreation, "Recommendation X.721: 1992": objectDeletion; REGISTERED AS {gsm1204package 211}; C.2.2 BSC Measurement Function Related Packages C.2.2.1 requestForServicePackage requestForServicePackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES unsuccReqsForService GET; REGISTERED AS {gsm1204package 221}; C.2.2.2 requestForServicePerCausePackage requestForServicePerCausePackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES unsuccReqsForServicePerCause GET; REGISTERED AS {gsm1204package 222}; C.2.2.3 interArrivalTimePackage interArrivalTimePackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES meanInterArrivalTime GET; REGISTERED AS {gsm1204package 223}; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 126 (GSM 12.04 version 7.0.0 Release 1998) C.2.2.4 pagingMessagePerBSCPackage pagingMessagePerBSCPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attTransOfPagingMessagesPerBSC GET, unsuccTransOfPagingMessagesPerBSC GET; REGISTERED AS {gsm1204package 224}; C.2.2.5 immediateAssignmentProceduresPerBSCPackage immediateAssignmentProceduresPerBSCPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attImmediateAssingProcsPerBSC GET, succImmediateAssingProcsPerBSC GET; REGISTERED AS {gsm1204package 225}; C.2.2.6 internalHandoversIntraCellPerBSCPackage internalHandoversIntraCellPerBSCPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES succInternalHDOsIntraCellPerBSC GET, unsuccInternalHDOsIntraCellPerBSC GET; REGISTERED AS {gsm1204package 226}; C.2.2.7 internalHandoversPerBSCPackage internalHandoversPerBSCPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES succInternalHDOsPerBSC GET; REGISTERED AS {gsm1204package 227}; C.2.2.8 internalHandoversPerCausePackage internalHandoversPerCausePackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES succInternalHDOsPerCause GET; REGISTERED AS {gsm1204package 228}; C.2.2.9 internalHandoverFailuresPerBSCPackage internalHandoverFailuresPerBSCPackage PACKAGE BEHAVIOUR ETSI ETSI TS 100 615 V7.0.0 (2000-02) 127 (GSM 12.04 version 7.0.0 Release 1998) generalMeasurementPackageBehaviour; ATTRIBUTES unsuccInternalHDOsWithReconnectionPerBSC GET, unsuccInternalHDOsWithLossOfConnectionPerBSC GET; REGISTERED AS {gsm1204package 229}; C.2.2.10 gprsPDUFlushReqPackage gprsPDUFlushReqPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES FlushReqReceived GET; REGISTERED AS {gsm1204package 2210}; C.2.2.11 gprsPagingRequestPackage gprsPagingRequestPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES pagingReqReceivedfromSGSN GET; REGISTERED AS {gsm1204package 2211}; C.2.2.12 gprsInterArrivalPackage gprsInterArrivalPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES meanPSInterArrivalTime GET; REGISTERED AS {gsm1204package 2212}; C.2.3 CELL Measurement Function Related Packages C.2.3.1 pchagchQueuePackage pchagchQueuePackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES meanPCHAGCHQueueLength GET; REGISTERED AS {gsm1204package 231}; C.2.3.2 pagingMessagePackage pagingMessagePackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES ETSI ETSI TS 100 615 V7.0.0 (2000-02) 128 (GSM 12.04 version 7.0.0 Release 1998) attTransOfPagingMessagesThePCH GET, unsuccTransOfPagingMessagesThePCH GET; REGISTERED AS {gsm1204package 232}; C.2.3.3 immediateAssignmentProceduresPackage immediateAssignmentProceduresPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attImmediateAssingProcs GET, succImmediateAssingProcs GET; REGISTERED AS {gsm1204package 233}; C.2.3.4 immediateAssignmentProceduresPerCausePackage immediateAssignmentProceduresPerCausePackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attImmediateAssingProcsPerCause GET, succImmediateAssingProcsPerCause GET; REGISTERED AS {gsm1204package 234}; C.2.3.5 pageDiscardPackage pageDiscardPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES nbrOfPagesDiscardedFromPCHQueue GET; REGISTERED AS {gsm1204package 235}; C.2.3.6 durationOfPagingProceduresPackage durationOfPagingProceduresPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES meanDurationOfSuccPagingProcs GET; REGISTERED AS {gsm1204package 236}; C.2.3.7 tchAvailablePackage tchAvailablePackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES nbrOfAvailableTCHs GET; REGISTERED AS {gsm1204package 237}; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 129 (GSM 12.04 version 7.0.0 Release 1998) C.2.3.8 tchBusyPackage tchBusyPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES meanNbrOfBusyTCHs GET, maxNbrOfBusyTCHs GET; REGISTERED AS {gsm1204package 238}; C.2.3.9 idleTCHsPerInterferenceBandPackage idleTCHPerInterferenceBandPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES meanNbrOfIdleTCHsPerInterferenceBand GET; REGISTERED AS {gsm1204package 239}; C.2.3.10 tchSeizuresPackage tchSeizuresPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attTCHSeizures GET, succTCHSeizures GET, attTCHSeizuresMeetingTCHBlockedState GET; REGISTERED AS {gsm1204package 2310}; C.2.3.11 tchAllocatedTimePackage tchAllocatedTimePackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES allAvailableTCHAllocatedTime GET; REGISTERED AS {gsm1204package 2311}; C.2.3.12 tchBusyTimePackage tchBusyTimePackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES meanTCHBusyTime GET; REGISTERED AS {gsm1204package 2312}; C.2.3.13 tchQueuePackage tchQueuePackage PACKAGE BEHAVIOUR ETSI ETSI TS 100 615 V7.0.0 (2000-02) 130 (GSM 12.04 version 7.0.0 Release 1998) generalMeasurementPackageBehaviour; ATTRIBUTES meanTCHQueueLength GET; REGISTERED AS {gsm1204package 2313}; C.2.3.14 lostRadioLinksPerTCHPackage lostRadioLinksPerTCHPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES nbrOfLostRadioLinksTCH GET; REGISTERED AS {gsm1204package 2314}; C.2.3.15 sdcchAvailablePackage sdcchAvailablePackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES nbrOfAvailableSDCCHs GET; REGISTERED AS {gsm1204package 2315}; C.2.3.16 sdcchBusyPackage sdcchBusyPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES meanNbrOfBusySDCCHs GET, maxNbrOfBusySDCCHs GET; REGISTERED AS {gsm1204package 2316}; C.2.3.17 sdcchSeizuresPackage sdcchSeizuresPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attSDCCHSeizuresMeetingSDCCHBlockedState GET; REGISTERED AS {gsm1204package 2317}; C.2.3.18 sdcchAllocatedTimePackage sdcchAllocatedTimePackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES allAvailableSDCCHAllocatedTime GET; REGISTERED AS {gsm1204package 2318}; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 131 (GSM 12.04 version 7.0.0 Release 1998) C.2.3.19 sdcchQueuePackage sdcchQueuePackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES meanSDCCHQueueLength GET; REGISTERED AS {gsm1204package 2319}; C.2.3.20 lostRadioLinksPerSDCCHPackage lostRadioLinksPerSDCCHPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES nbrOfLostRadioLinksSDCCH GET; REGISTERED AS {gsm1204package 2320}; C.2.3.21 downlinkPowerControlPackage downlinkPowerControlPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES relativeTimeDLPowerControlAtMax GET; REGISTERED AS {gsm1204package 2321}; C.2.3.22 uplinkPowerControlPackage uplinkPowerControlPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES relativeTimeULPowerControlAtMax GET; REGISTERED AS {gsm1204package 2322}; C.2.3.23 internalHandoversIntraCellPackage internalHandoversIntraCellPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES succInternalHDOsIntraCell GET, unsuccInternalHDOsIntraCell GET; REGISTERED AS {gsm1204package 2323}; C.2.3.24 incomingInternalInterCellHandoversPackage incomingInternalInterCellHandoversPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES ETSI ETSI TS 100 615 V7.0.0 (2000-02) 132 (GSM 12.04 version 7.0.0 Release 1998) attIncomingInternalInterCellHDOs GET, succIncomingInternalInterCellHDOs GET; REGISTERED AS {gsm1204package 2324}; C.2.3.25 outgoingInternalInterCellHandoversPackage outgoingInternalInterCellHandoversPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attOutgoingInternalInterCellHDOs GET, succOutgoingInternalInterCellHDOs GET; REGISTERED AS {gsm1204package 2325}; C.2.3.26 internalHandoverFailurePackage internalHandoverFailurePackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES unsuccHDOsWithReconnection GET, unsuccHDOsWithLossOfConnection GET; REGISTERED AS {gsm1204package 2326}; C.2.3.27 gprsPDCHAvailablePackage gprsPDCHAvailablePackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES availablePDCH GET, meanNbrAvailablePDCH GET, maxNbrAvailablePDCH GET, minNbrAvailablePDCH GET; REGISTERED AS {gsm1204package 2327}; C.2.3.28 gprsPDCHOccupiedPackage gprsPDCHOccupiedPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES meanNbrOfOccPDCH GET, maxNbrOfOccPDCH GET, minNbrOfOccPDCH GET; REGISTERED AS {gsm1204package 2328}; C.2.3.29 gprsPDCHAllocatedPackage gprsPDCHAllocatedPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 133 (GSM 12.04 version 7.0.0 Release 1998) ATTRIBUTES availablePDCH AllocatedTime GET; REGISTERED AS {gsm1204package 2329}; C.2.3.30 gprsPCCCHPagingPackage gprsPCCCHPagingPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES nbrPacketPagingMessagesPCHOnPCCCH GET; REGISTERED AS {gsm1204package 2330}; C.2.3.31 gprsPPCHQueueOnPCCCHPackage gprsPPCHQueueOnPCCCHPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES meanPPCHPAGCHQueueLengthOnPCCCH GET, nbrOfPSPagesDiscardedFromPPCHQueueOnPCCCH GET; REGISTERED AS {gsm1204package 2331}; C.2.3.32 gprsPDTCHAssignmentPackage gprsPDTCHAssignmentPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attPCReqAssPerCause GET, succPDTCHAssProcsPerCause GET, succPDTCHSeizures GET; REGISTERED AS {gsm1204package 2332}; C.2.3.33 gprsPDTCHQueuePackage gprsPDTCHQueuePackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES meanPacketQueueLength GET; REGISTERED AS {gsm1204package 2333}; C.2.3.34 gprsCSChangePackage gprsCSChangePackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES nbrOfServiceChanges GET; REGISTERED AS {gsm1204package 2334}; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 134 (GSM 12.04 version 7.0.0 Release 1998) C.2.4 internal HDO Measurement Function Related Packages C.2.4.1 incomingInternalInterCellPerCellHandoversPackage incomingInternalInterCellPerCellHandoversPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attIncomingInternalInterCellHDOsPerOriginatingCell GET, succIncomingInternalInterCellHDOsPerOriginatingCellGET; REGISTERED AS {gsm1204package 241}; C.2.4.2 outgoingInternalInterCellPerCellHandoversPackage outgoingInternalInterCellPerCellHandoversPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attOutgoingInternalInterCellHDOsPerTargetCellGET, succOutgoingInternalInterCellHDOsPerTargetCell GET; REGISTERED AS {gsm1204package 242}; C.2.5 MSC Measurement Function Related Packages C.2.5.1 classMarkPackage classMarkPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES nbrOfClassMarkUpdates GET; REGISTERED AS {gsm1204package 251}; C.2.5.2 mobileOriginatingCallsPackage mobileOriginatingCallsPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attMobileOriginatingCalls GET, succMobileOriginatingCalls GET, ansMobileOriginatingCalls GET; REGISTERED AS {gsm1204package 252}; C.2.5.3 mobileTerminatingCallsPackage mobileTerminatingCallsPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attMobileTerminatingCalls GET, ETSI ETSI TS 100 615 V7.0.0 (2000-02) 135 (GSM 12.04 version 7.0.0 Release 1998) succMobileTerminatingCalls GET, ansMobileTerminatingCalls GET; REGISTERED AS {gsm1204package 253}; C.2.5.4 mobileEmergencyCallsPackage mobileEmergencyCallsPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attMobileEmergencyCalls GET, succMobileEmergencyCalls GET, ansMobileEmergencyCalls GET; REGISTERED AS {gsm1204package 254}; C.2.5.5 cipheringModePackage cipheringModePackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attCipheringModeControlProcs GET, succCipheringModeControlProcs GET; REGISTERED AS {gsm1204package 255}; C.2.5.6 interrogatingHLRPackage interrogatingHLRPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attInterrogationOfHLRsForRouting GET, succInterrogationOfHLRsMSRNObtained GET, succInterrogationOfHLRsCallForwarding GET; REGISTERED AS {gsm1204package 256}; C.2.5.7 mobileOriginatingPointToPointSMPackage mobileOriginatingPointToPointSMPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attOpForMobileOriginatingPointToPointSMs GET, succOpForMobileOriginatingPointToPointSMs GET; REGISTERED AS {gsm1204package 257}; C.2.5.8 mobileTerminatingPointToPointSMPackage mobileTerminatingPointToPointSMPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES ETSI ETSI TS 100 615 V7.0.0 (2000-02) 136 (GSM 12.04 version 7.0.0 Release 1998) attOpForMobileTerminatingPointToPointSMs GET, succOpForMobileTerminatingPointToPointSMs GET; REGISTERED AS {gsm1204package 258}; C.2.5.9 imeiRequestPackage imeiRequestPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES nbrOfTransCheckIMEIRequests GET; REGISTERED AS {gsm1204package 259}; C.2.5.10 whiteAnswersInMSCPackage whiteAnswersInMSCPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES nbrOfWhiteAnsInMSC GET; REGISTERED AS {gsm1204package 2510}; C.2.5.11 greyAnswersInMSCPackage greyAnswersInMSCPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES nbrOfGreyAnsInMSC GET; REGISTERED AS {gsm1204package 2511}; C.2.5.12 blackAnswersInMSCPackage blackAnswersInMSCPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES nbrOfBlackAnsInMSC GET; REGISTERED AS {gsm1204package 2512}; C.2.5.13 unknownIMEIAnswersInMSCPackage unknownIMEIAnswersInMSCPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES nbrOfUnknownIMEIAnsInMSC GET; REGISTERED AS {gsm1204package 2513}; C.2.5.14 callSetupServicePackage callSetupServicePackage PACKAGE ETSI ETSI TS 100 615 V7.0.0 (2000-02) 137 (GSM 12.04 version 7.0.0 Release 1998) BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES meanTimeToCallSetupService GET; REGISTERED AS {gsm1204package 2514}; C.2.5.15 locationUpdatingServicePackage locationUpdatingServicePackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES meanTimeToLocationUpdateService GET; REGISTERED AS {gsm1204package 2515}; C.2.5.16 subscriberIdentifiedWithTMSIPackage subscriberIdentifiedWithTMSIPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES transSubIdentifiedWithTMSI GET; REGISTERED AS {gsm1204package 2516}; C.2.5.17 subscriberIdentifiedWithIMSIPackage subscriberIdentifiedWithIMSIPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES transSubIdentifiedWithIMSI GET; REGISTERED AS {gsm1204package 2517}; C.2.5.18 tmsiReallocationsPackage tmsiReallocationsPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attTMSIReallocations GET, succTMSIReallocations GET; REGISTERED AS {gsm1204package 2518}; C.2.5.19 imsiDetachProceduresPackage imsiDetachProceduresPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES imsiDetachProcs GET, imsiAttachProcs GET; REGISTERED AS {gsm1204package 2519}; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 138 (GSM 12.04 version 7.0.0 Release 1998) C.2.5.20 incomingExternalIntraMSCHandoversPackage incomingExternalIntraMSCHandoversPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attIncomingExternalIntraMSCHDOs GET, succIncomingExternalIntraMSCHDOs GET; REGISTERED AS {gsm1204package 2520}; C.2.5.21 outgoingExternalIntraMSCHandoversPackage outgoingExternalIntraMSCHandoversPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attOutgoingExternalIntraMSCHDOs GET, succOutgoingExternalIntraMSCHDOs GET; REGISTERED AS {gsm1204package 2521}; C.2.5.22 incomingInterMSCHandoversPackage incomingInterMSCHandoversPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attIncomingInterMSCHDOs GET, succIncomingInterMSCHDOs GET; REGISTERED AS {gsm1204package 2522}; C.2.5.23 outgoingInterMSCHandoversPackage outgoingInterMSCHandoversPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attOutgoingInterMSCHDOs GET, succOutgoingInterMSCHDOs GET; REGISTERED AS {gsm1204package 2523}; C.2.5.24 subsequentInterMSCHandoversToMACaPackage subsequentInterMSCHandoversToMACaPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attSubsequentInterMSCHDOsMSCa GET, succSubsequentInterMSCHDOsMSCa GET; REGISTERED AS {gsm1204package 2524}; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 139 (GSM 12.04 version 7.0.0 Release 1998) C.2.5.25 subsequentInterMSCHandoversToMACcPackage subsequentInterMSCHandoversToMACcPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attSubsequentInterMSCHDOsMSCc GET, succSubsequentInterMSCHDOsMSCc GET; REGISTERED AS {gsm1204package 2525}; C.2.5.26 externalHandoversPackage externalHandoversPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES externalHDOs GET; REGISTERED AS {gsm1204package 2526}; C.2.5.27 externalHandoversPerCausePackage externalHandoversPerCausePackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES externalHDOsPerCause GET; REGISTERED AS {gsm1204package 2527}; C.2.5.28 externalHandoverFailurePerMSCPackage externalHandoverFailurePerMSCPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES unsuccExternHDOsWithReconnectionPerMSC GET, unsuccExternHDOsWithLossOfConnectionPerMSC GET; REGISTERED AS {gsm1204package 2528}; C.2.6 external HDO Measurement Function Related Packages C.2.6.1 incomingExternalIntraMSCHandoversPerCellPackage incomingExternalIntraMSCHandoversPerCellPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attIncomingExternalIntraMSCHDOsPerOriginatingCell GET, succIncomingExternalIntraMSCHDOsPerOriginatingCell GET; REGISTERED AS {gsm1204package 261}; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 140 (GSM 12.04 version 7.0.0 Release 1998) C.2.6.2 outgoingExternalIntraMSCHandoversPerCellPackage outgoingExternalIntraMSCHandoversPerCellPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attOutgoingExternalIntraMSCHDOsPerTargetCell GET, succOutgoingExternalIntraMSCHDOsPerTargetCell GET; REGISTERED AS {gsm1204package 262}; C.2.6.3 incomingExternalInterMSCHandoversPerCellPackage incomingExternalInterMSCHandoversPerCellPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attIncomingInterMSCHDOsPerOriginatingCell GET, succIncomingInterMSCHDOsPerOriginatingCellGET; REGISTERED AS {gsm1204package 263}; C.2.6.4 outgoingExternalInterMSCHandoversPerCellPackage outgoingExternalInterMSCHandoversPerCellPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attOutgoingInterMSCHDOsPerTargetCell GET, succOutgoingInterMSCHDOsPerTargetCell GET; REGISTERED AS {gsm1204package 264}; C.2.7 HLR Measurement Function Related Packages C.2.7.1 msRoamingOutsideHPLMNPackage msRoamingOutsideHPLMNPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES nbrOfCurrentMSsRoamingOutsideHPLMN GET; REGISTERED AS {gsm1204package 271}; C.2.7.2 authenticationSetsHLRToVLRPackage authenticationSetsHLRToVLRPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attReqForAuthSetsReceivedByHLRFromVLRs GET, succReturnedAuthSetsFromHLRToVLRs GET, emptyResponsesForAuthSetsFromHLRToVLRs GET; REGISTERED AS {gsm1204package 272}; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 141 (GSM 12.04 version 7.0.0 Release 1998) C.2.7.3 insertSubscriberDataServicePackage insertSubscriberDataServicePackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attInsertSubDataService GET, succInsertSubDataService GET; REGISTERED AS {gsm1204package 273}; C.2.7.4 locationUpdatePackage locationUpdatePackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attLocationUpdate GET, succLocationUpdate GET; REGISTERED AS {gsm1204package 274}; C.2.7.5 ssRelatedOperationsInHLRPackage ssRelatedOperationsInHLRPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attSSRelatedOperationsInHLR GET, succSSRelatedOperationsInHLR GET; REGISTERED AS {gsm1204package 275}; C.2.7.6 requestForSMRoutingPackage requestForSMRoutingPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attReqForSMRoutingInfo GET, succReqForSMRoutingInfo GET; REGISTERED AS {gsm1204package 276}; C.2.7.7 smDeliveryStatusReportProceduresPackage smDeliveryStatusReportProceduresPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attSMDeliveryStatusReportProcs GET, succSMDeliveryStatusReportProcs GET; REGISTERED AS {gsm1204package 277}; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 142 (GSM 12.04 version 7.0.0 Release 1998) C.2.7.8 sendAlertsPackage sendAlertsPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attNbrOfSendAlerts GET, succNbrOfSendAlerts GET; REGISTERED AS {gsm1204package 278}; C.2.7.9 requestForMSRNPackage requestForMSRNPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attReqForMSRN GET, succReqForMSRN GET; REGISTERED AS {gsm1204package 279}; C.2.8 VLR Measurement Function Related Packages C.2.8.1 msMemoryAvailableNotificationsPackage msMemoryAvailableNotificationsPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attMSMemoryAvailableNotifications GET, succMSMemoryAvailableNotifications GET; REGISTERED AS {gsm1204package 281}; C.2.8.2 identificationRequestToPVLRPackage identificationRequestToPVLRPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attIdentificationReqToPVLRs GET, succIdentificationReqToPVLRs GET; REGISTERED AS {gsm1204package 282}; C.2.8.3 pageRequestPackage pageRequestPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attPageReqs GET, succPageReqs GET; REGISTERED AS {gsm1204package 283}; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 143 (GSM 12.04 version 7.0.0 Release 1998) C.2.8.4 pageRequestPerLocationAreaPackage pageRequestPerLocationAreaPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attPageReqsPerLocationArea GET, succPageReqsPerLocationArea GET; REGISTERED AS {gsm1204package 284}; C.2.8.5 authenticationSetsVLRToHLRPackage authenticationSetsVLRToHLRPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attReqForAuthSetsSentToHLR GET, succReceivedAuthSetsFromHLR GET, emptyResponsesForAuthFromHLR GET; REGISTERED AS {gsm1204package 285}; C.2.8.6 authenticationInVLRPackage authenticationInVLRPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attAuthProcsInVLR GET, succAuthProcsInVLR GET; REGISTERED AS {gsm1204package 286}; C.2.8.7 intraVLRLocationUpdatePackage intraVLRLocationUpdatePackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attIntraVLRLocationUpdates GET, succIntraVLRLocationUpdates GET; REGISTERED AS {gsm1204package 287}; C.2.8.8 interVLRLocationUpdatePackage interVLRLocationUpdatePackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attInterVLRLocationUpdates GET, succInterVLRLocationUpdates GET; REGISTERED AS {gsm1204package 288}; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 144 (GSM 12.04 version 7.0.0 Release 1998) C.2.8.9 visitorsFromOtherPLMNPackage visitorsFromOtherPLMNPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES arrivalOfVisitorsFromOtherPLMNs GET; REGISTERED AS {gsm1204package 289}; C.2.9 EIR Measurement Function Related Packages C.2.9.1 receivedIMEIcheckRequestPackage receivedIMEIcheckRequestPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES nbrOfReceivedIMEICheckReqs GET; REGISTERED AS {gsm1204package 291}; C.2.9.2 whiteAnswersInEIRPackage whiteAnswersInEIRPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES nbrOfWhiteAnsInEIR GET; REGISTERED AS {gsm1204package 292}; C.2.9.3 greyAnswersInEIRPackage greyAnswersInEIRPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES nbrOfGreyAnsInEIR GET; REGISTERED AS {gsm1204package 293}; C.2.9.4 blackAnswersInEIRPackage blackAnswersInEIRPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES nbrOfBlackAnsInEIR GET; REGISTERED AS {gsm1204package 294}; C.2.9.5 unknownIMEIAnswersInEIRPackage unknownIMEIAnswersInEIRPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 145 (GSM 12.04 version 7.0.0 Release 1998) ATTRIBUTES nbrOfUnknownIMEIAnsInEIR GET; REGISTERED AS {gsm1204package 295}; C.2.10 SMS Measurement Function Related Packages C.2.10.1 mobileOriginatingSMForwardingPackage mobileOriginatingSMForwardingPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attMobileOriginatingSMForwardings GET, succMobileOriginatingSMForwardings GET; REGISTERED AS {gsm1204package 2101}; C.2.10.2 mobileTerminatingSMForwardingPackage mobileTerminatingSMForwardingPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attMobileTerminatingSMForwardings GET, succMobileTerminatingSMForwardings GET; REGISTERED AS {gsm1204package 2102}; C.2.11 SGSN Measurement Function Related Packages C.2.11.1 sgsnLLCPackage sgsnLLCPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES nbrLlcFramesSent GET, nbrllcFramesReceived GET, errLlcFramesDetectedBySgsn GET, retransmittedLlcFramestoMs GET; REGISTERED AS {gsm1204package 2111}; C.2.11.2 sgsnSNDCPPackage sgsnSNDCPPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES uplinkSndcpNpduReceived GET, uplinkSndcpOctetReceivedMode GET, downlinkSndcpNpdusent GET, downlinkSndcpOctetSent GET; REGISTERED AS {gsm1204package 2112}; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 146 (GSM 12.04 version 7.0.0 Release 1998) C.2.11.3 gprsAttachPackage gprsAttachPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attGprsAttach GET, succGprsAttach GET; REGISTERED AS {gsm1204package 2113}; C.2.11.4 gprsIMSIAttachPackage gprsIMSIAttachPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attCombiAttach GET, succCombiAttach GET; REGISTERED AS {gsm1204package 2114}; C.2.11.5 gprsIMSIAlreadyAttachedPackage gprsIMSIAlreadyAttachedPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attImsiAttach GET, succImsiAttach GET; REGISTERED AS {gsm1204package 2115}; C.2.11.6 gprsAttachedSubscribersPackage gprsAttachedSubscribersPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES nbrOfAttachedSub GET, meanNbrOfAttachedSub GET, maxNbrOfAttachedSub GET; REGISTERED AS {gsm1204package 2116}; C.2.11.7 gprsMSDetachPackage gprsMSDetachPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attGprsDetachMs GET, attCombiDetachMs GET, attImsiDetachMs GET; REGISTERED AS {gsm1204package 2117}; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 147 (GSM 12.04 version 7.0.0 Release 1998) C.2.11.8 gprsSGSNDetachPackage gprsSGSNDetachPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attGprsdetachSgsn GET, succGprsdetachSgsn GET; REGISTERED AS {gsm1204package 2118}; C.2.11.9 gprsRouting AreaUpdatePackage gprsRouting AreaUpdatePackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attItraSgsnRaUpdate GET, succIntraSgsnRaUpdate GET, attInterSgsnRaUpdate GET, succInterSgsnRaUpdate GET; REGISTERED AS {gsm1204package 2119}; C.2.11.10 pTMSIReallocationPackage pTMSIReallocationPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attPTMSIRealloc GET, succPTMSIrealloc GET; REGISTERED AS {gsm1204package 21110}; C.2.11.11 sgsnHLRAuthenticationPackage sgsnHLRAuthenticationPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attreqAuthSetsSentToHlrBySgsn GET, succReqAuthSetsHlr GET, emptyResponsesForAuthSetsFromHlr GET; REGISTERED AS {gsm1204package 21111}; C.2.11.12 sgsnAuthenticationProcPackage sgsnAuthenticationProcPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attAuthInSgsn GET, succAuthInSgsn GET; REGISTERED AS {gsm1204package 21112}; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 148 (GSM 12.04 version 7.0.0 Release 1998) C.2.11.13 sgsnIdentityRequestPackage sgsnIdentityRequestPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attIdentityReq GET, succIdentityReq GET; REGISTERED AS {gsm1204package 21113}; C.2.11.14 sgsnCipheringModePackage sgsnCipheringModePackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attCipheringModeControlPerSgsn GET, succCipheringModeControlPerSgsn GET; REGISTERED AS {gsm1204package 21114}; C.2.11.15 gprsSubsStandbyStatePackage gprsSubsStandbyStatePackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES nbrOfSubStandby GET, meanNbrOfSubStandby GET, maxNbrOfSubStandby GET; REGISTERED AS {gsm1204package 21115}; C.2.11.16 gprsSubsReadyStatePackage gprsSubsReadyStatePackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES nbrOfSubReady GET, meanNbrOfSubReady GET, maxNbrOfSubReady GET; REGISTERED AS {gsm1204package 21116}; C.2.11.17 sgsnIMEICheckRequestsPackage sgsnIMEICheckRequestsPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES nbrOfCheckIMEIRequests GET; REGISTERED AS {gsm1204package 21117}; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 149 (GSM 12.04 version 7.0.0 Release 1998) C.2.11.18 whiteAnswersInSGSNPackage whiteAnswersInSGSNPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES nbrOfWhiteAnswerInSgsn GET; REGISTERED AS {gsm1204package 21118}; C.2.11.19 greyAnswersInSGSNPackage greyAnswersInSGSNPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES nbrOfGreyAnswerInSgsn GET; REGISTERED AS {gsm1204package 21119}; C.2.11.20 blackAnswersInSGSNPackage blackAnswersInSGSNPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES nbrOfBlackAnswerInSgsn GET; REGISTERED AS {gsm1204package 21120}; C.2.11.21 unknownIMEIAnswersInSGSNPackage unknownIMEIAnswersInSGSNPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES nbrOfUnknownAnswerInSgsn GET; REGISTERED AS {gsm1204package 21121}; C.2.11.22 sgsnPacketSwitched PagingPackage sgsnPacketSwitched PagingPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attPacketSwitchedPaging GET, unsuccPacketSwitchedPaging GET; REGISTERED AS {gsm1204package 21122}; C.2.11.23 sgsnPacketSwitched PagingPerRAPackage sgsnPacketSwitched PagingPerRAPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES ETSI ETSI TS 100 615 V7.0.0 (2000-02) 150 (GSM 12.04 version 7.0.0 Release 1998) attPsPagingPerRoutingArea GET, unsuccPsPagingPerRoutingArea GET; REGISTERED AS {gsm1204package 21123}; C.2.11.24 sgsnPDPContextActivationByMSPackage sgsnPDPContextActivationByMSPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attActPdpContextMSPerSgsn GET, succActPdpContextMSPerSgsn GET; REGISTERED AS {gsm1204package 21124}; C.2.11.25 sgsnDynamicPDPContextActivationByMSPackage sgsnDynamicPDPContextActivationByMSPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attActPdpContextDynMSPerSgsn GET, succActPdpContextDynMSPerSgsn GET; REGISTERED AS {gsm1204package 21125}; C.2.11.26 sgsnPDPContextDeactivationByMSPackage sgsnPDPContextDeactivationByMSPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attDeactPdpContextMsPerSgsn GET, succDeactPdpContextMsPerSgsn GET; REGISTERED AS {gsm1204package 21126}; C.2.11.27 sgsnPDPContextDeactivationByGGSNPackage sgsnPDPContextDeactivationByGGSNPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attDeactPdpContextGgsnPerSgsn GET, succDeactPdpContextGgsnPerSgsn GET; REGISTERED AS {gsm1204package 21127}; C.2.11.28 subscriberPDPContextsAtSGSNPackage subscriberPDPContextsAtSGSNPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES nbrSubsWithActivePdpInSgsn GET, meanSubsWithActivePdpInSgsn GET, ETSI ETSI TS 100 615 V7.0.0 (2000-02) 151 (GSM 12.04 version 7.0.0 Release 1998) nmaxSubsWithActivePdpInSgsn GET; REGISTERED AS {gsm1204package 21128}; C.2.12 GGSN Measurement Function Related Packages C.2.12.1 ggsnPDPContextActivationByMSPackage ggsnPDPContextActivationByMSPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attActPdpContextPerApnOfGgsn GET, succActPdpContextPerApnOfGgsn GET; REGISTERED AS {gsm1204package 2121} C.2.12.2 ggsnDynamicPDPContextActivationByMSPackage ggsnDynamicPDPContextActivationByMSPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attActPdpContextDnyPerApnOfGgsn GET, succActPdpContextDnyPerApnOfGgsn GET; REGISTERED AS {gsm1204package 2122}; C.2.12.3 ggsnPDPContextDeactivationByMSPackage ggsnPDPContextDeactivationByMSPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attDeactPdpContextMsPerApnOfGgsn GET, succDeactPdpContextMsPerApnOfGgsn GET; REGISTERED AS {gsm1204package 2123}; C.2.12.4 ggsnPDPContextDeactivationByGGSNPackage ggsnPDPContextDeactivationByGGSNPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ATTRIBUTES attDeactPdpContextByGgsnPerApn GET, succDeactPdpContextByGgsnMsPerApn GET; REGISTERED AS {gsm1204package 2124}; C.2.12.5 ActivePDPContextsAtGGSNPackage ActivePDPContextsAtGGSNPackage PACKAGE BEHAVIOUR generalMeasurementPackageBehaviour; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 152 (GSM 12.04 version 7.0.0 Release 1998) ATTRIBUTES nbrOfActivePdpContextsPerApnAtGgsn GET, meanNbrOfActivePdpContextsPerApnAtGgsn GET, maxNbrOfActivePdpContextsPerApnAtGgsn GET; REGISTERED AS {gsm1204package 2125}; C.3 Measurement Attribute Definitions C.3.1 General Measurement Function Related Attributes C.3.1.1 measurementFunctionId measurementFunctionId ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementFunctionId; BEHAVIOUR measurementFunctionIdBehaviour; REGISTERED AS {gsm1204attribute 311}; measurementFunctionIdBehaviour BEHAVIOUR DEFINED AS "This is the identity of the measurement function"; C.3.1.2 observedCell observedCell ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMCellName; BEHAVIOUR observedCellBehaviour; REGISTERED AS {gsm1204attribute 312}; observedCellBehaviour BEHAVIOUR DEFINED AS "This is the Cell that is to be observed for this measurement"; C.3.1.3 adjacentCell adjacentCell ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMCellName; BEHAVIOUR adjacentCellBehaviour; REGISTERED AS {gsm1204attribute 313}; adjacentCellBehaviour BEHAVIOUR DEFINED AS "This is the Cell that is adjacent to the observed cell for this measurement"; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 153 (GSM 12.04 version 7.0.0 Release 1998) C.3.2 BSC Measurement Function Related Attributes C.3.2.1 unsuccReqsForService unsuccReqsForService ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 321}; C.3.2.2 unsuccReqsForServicePerCause unsuccReqsForServicePerCause ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType3; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 322}; C.3.2.3 meanInterArrivalTime meanInterArrivalTime ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType2; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 323}; C.3.2.4 attTransOfPagingMessagesPerBSC attTransOfPagingMessagesPerBSC ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 324}; C.3.2.5 unsuccTransOfPagingMessagesPerBSC unsuccTransOfPagingMessagesPerBSC ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 325}; C.3.2.6 attImmediateAssingProcsPerBSC attImmediateAssingProcsPerBSC ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 154 (GSM 12.04 version 7.0.0 Release 1998) BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 326}; C.3.2.7 succImmediateAssingProcsPerBSC succImmediateAssingProcsPerBSC ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 327}; C.3.2.8 succInternalHDOsIntraCellPerBSC succInternalHDOsIntraCellPerBSC ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 328}; C.3.2.9 unsuccInternalHDOsIntraCellPerBSC unsuccInternalHDOsIntraCellPerBSC ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 329}; C.3.2.10 succInternalHDOsPerBSC succInternalHDOsPerBSC ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3210}; C.3.2.11 succInternalHDOsPerCause succInternalHDOsPerCause ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType3; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3211}; C.3.2.12 unsuccInternalHDOsWithReconnectionPerBSC unsuccInternalHDOsWithReconnectionPerBSC ATTRIBUTE ETSI ETSI TS 100 615 V7.0.0 (2000-02) 155 (GSM 12.04 version 7.0.0 Release 1998) WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3212}; C.3.2.13 unsuccInternalHDOsWithLossOfConnectionPerBSC unsuccInternalHDOsWithLossOfConnectionPerBSC ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3213}; C.3.2.14 flushRequestReceived flushRequestReceived ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3214}; C.3.2.15 pagingReqReceivedfromSgsn pagingReqReceivedfromSgsn ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3215}; C.3.2.16 meanPSInterArrivalTime meanPSInterArrivalTime ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3216}; C.3.3 CELL Measurement Function Related Attributes C.3.3.1 meanPCHAGCHQueueLength meanPCHAGCHQueueLength ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType2; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 331}; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 156 (GSM 12.04 version 7.0.0 Release 1998) C.3.3.2 attTransOfPagingMessagesThePCH attTransOfPagingMessagesThePCH ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 332}; C.3.3.3 unsuccTransOfPagingMessagesThePCH unsuccTransOfPagingMessagesThePCH ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 333}; C.3.3.4 attImmediateAssingProcs attImmediateAssingProcs ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 334}; C.3.3.5 succImmediateAssingProcs succImmediateAssingProcs ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 335}; C.3.3.6 attImmediateAssingProcsPerCause attImmediateAssingProcsPerCause ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType3; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 336}; C.3.3.7 succImmediateAssingProcsPerCause succImmediateAssingProcsPerCause ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType3; BEHAVIOUR generalMeasurementAttributeBehaviour; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 157 (GSM 12.04 version 7.0.0 Release 1998) REGISTERED AS {gsm1204attribute 337}; C.3.3.8 nbrOfPagesDiscardedFromPCHQueue nbrOfPagesDiscardedFromPCHQueue ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 338}; C.3.3.9 meanDurationOfSuccPagingProcs meanDurationOfSuccPagingProcs ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType2; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 339}; C.3.3.10 nbrOfAvailableTCHs nbrOfAvailableTCHs ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3310}; C.3.3.11 meanNbrOfBusyTCHs meanNbrOfBusyTCHs ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType2; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3311}; C.3.3.12 maxNbrOfBusyTCHs maxNbrOfBusyTCHs ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3312}; C.3.3.13 meanNbrOfIdleTCHsPerInterferenceBand meanNbrOfIdleTCHsPerInterferenceBand ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType4; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 158 (GSM 12.04 version 7.0.0 Release 1998) BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3313}; C.3.3.14 attTCHSeizures attTCHSeizures ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3314}; C.3.3.15 succTCHSeizures succTCHSeizures ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3315}; C.3.3.16 attTCHSeizuresMeetingTCHBlockedState attTCHSeizuresMeetingTCHBlockedState ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3316}; C.3.3.17 allAvailableTCHAllocatedTime allAvailableTCHAllocatedTime ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType2; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3317}; C.3.3.18 meanTCHBusyTime meanTCHBusyTime ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType2; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3318}; C.3.3.19 meanTCHQueueLength meanTCHQueueLength ATTRIBUTE ETSI ETSI TS 100 615 V7.0.0 (2000-02) 159 (GSM 12.04 version 7.0.0 Release 1998) WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType2; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3319}; C.3.3.20 nbrOfLostRadioLinksTCH nbrOfLostRadioLinksTCH ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3320}; C.3.3.21 nbrOfAvailableSDCCHs nbrOfAvailableSDCCHs ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3321}; C.3.3.22 meanNbrOfBusySDCCHs meanNbrOfBusySDCCHs ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType2; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3322}; C.3.3.23 maxNbrOfBusySDCCHs maxNbrOfBusySDCCHs ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3323}; C.3.3.24 attSDCCHSeizuresMeetingSDCCHBlockedState attSDCCHSeizuresMeetingSDCCHBlockedState ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3324}; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 160 (GSM 12.04 version 7.0.0 Release 1998) C.3.3.25 allAvailableSDCCHAllocatedTime allAvailableSDCCHAllocatedTime ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType2; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3325}; C.3.3.26 meanSDCCHQueueLength meanSDCCHQueueLength ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType2; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3326}; C.3.3.27 nbrOfLostRadioLinksSDCCH nbrOfLostRadioLinksSDCCH ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3327}; C.3.3.28 relativeTimeDLPowerControlAtMax relativeTimeDLPowerControlAtMax ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType2; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3328}; C.3.3.29 relativeTimeULPowerControlAtMax relativeTimeULPowerControlAtMax ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType2; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3329}; C.3.3.30 succInternalHDOsIntraCell succInternalHDOsIntraCell ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 161 (GSM 12.04 version 7.0.0 Release 1998) REGISTERED AS {gsm1204attribute 3330}; C.3.3.31 unsuccInternalHDOsIntraCell unsuccInternalHDOsIntraCell ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3331}; C.3.3.32 attIncomingInternalInterCellHDOs attIncomingInternalInterCellHDOs ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3332}; C.3.3.33 succIncomingInternalInterCellHDOs succIncomingInternalInterCellHDOs ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3333}; C.3.3.34 attOutgoingInternalInterCellHDOs attOutgoingInternalInterCellHDOs ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3334}; C.3.3.35 succOutgoingInternalInterCellHDOs succOutgoingInternalInterCellHDOs ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3335}; C.3.3.36 unsuccHDOsWithReconnection unsuccHDOsWithReconnection ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 162 (GSM 12.04 version 7.0.0 Release 1998) BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3336}; C.3.3.37 unsuccHDOsWithLossOfConnection unsuccHDOsWithLossOfConnection ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3337}; C.3.3.38 availablePDCH availablePDCH ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3338}; C.3.3.39 meanNbrAvailablePDCH meanNbrAvailablePDCH ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3339}; C.3.3.40 maxNbrAvailablePDCH maxNbrAvailablePDCH ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3340}; C.3.3.41 minNbrAvailablePDCH minNbrAvailablePDCH ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3341}; C.3.3.42 meanNbrOfOccPDCH meanNbrOfOccPDCH ATTRIBUTE ETSI ETSI TS 100 615 V7.0.0 (2000-02) 163 (GSM 12.04 version 7.0.0 Release 1998) WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3342}; C.3.3.43 maxNbrOfOccPDCH maxNbrOfOccPDCH ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3343}; C.3.3.44 minNbrOfOccPDCH minNbrOfOccPDCH ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3344}; C.3.3.45 availablePDCHAllocatedTime availablePDCHAllocatedTime ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3345}; C.3.3.46 nbrPacketPagingMessagesPCHOnPCCCH nbrPacketPagingMessagesPCHOnPCCCH ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3346}; C.3.3.47 meanPPCHPAGCHQueueLengthOnPCCCH meanPPCHPAGCHQueueLengthOnPCCCH ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3347}; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 164 (GSM 12.04 version 7.0.0 Release 1998) C.3.3.48 nbrOfPSPagesDiscardedFromPPCHQueueOnPCCCH nbrOfPSPagesDiscardedFromPPCHQueueOnPCCCH ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3348}; C.3.3.49 attPCReqAssPerCause attPCReqAssPerCause ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3349}; C.3.3.50 succPDTCHAssProcsPerCause succPDTCHAssProcsPerCause ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3350}; C.3.3.51 succPDTCHSeizures succPDTCHSeizures ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3351}; C.3.3.52 meanPacketQueueLength meanPacketQueueLength ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3352}; C.3.3.53 nbrOfServiceChanges nbrOfServiceChanges ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 165 (GSM 12.04 version 7.0.0 Release 1998) REGISTERED AS {gsm1204attribute 3353}; C.3.4 internal HDO Measurement Function Related Attributes C.3.4.1 attIncomingInternalInterCellHDOsPerOriginatingCell attIncomingInternalInterCellHDOsPerOriginatingCell ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 341}; C.3.4.2 succIncomingInternalInterCellHDOsPerOriginatingCell succIncomingInternalInterCellHDOsPerOriginatingCell ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 342}; C.3.4.3 attOutgoingInternalInterCellHDOsPerTargetCell attOutgoingInternalInterCellHDOsPerTargetCell ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 343}; C.3.4.4 succOutgoingInternalInterCellHDOsPerTargetCell succOutgoingInternalInterCellHDOsPerTargetCell ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 344}; C.3.5 MSC Measurement Function Related Attributes C.3.5.1 nbrOfClassMarkUpdates nbrOfClassMarkUpdates ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 351}; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 166 (GSM 12.04 version 7.0.0 Release 1998) C.3.5.2 attMobileOriginatingCalls attMobileOriginatingCalls ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 352}; C.3.5.3 succMobileOriginatingCalls succMobileOriginatingCalls ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 353}; C.3.5.4 ansMobileOriginatingCalls ansMobileOriginatingCalls ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 354}; C.3.5.5 attMobileTerminatingCalls attMobileTerminatingCalls ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 355}; C.3.5.6 succMobileTerminatingCalls succMobileTerminatingCalls ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 356}; C.3.5.7 ansMobileTerminatingCalls ansMobileTerminatingCalls ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 167 (GSM 12.04 version 7.0.0 Release 1998) REGISTERED AS {gsm1204attribute 357}; C.3.5.8 attMobileEmergencyCalls attMobileEmergencyCalls ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 358}; C.3.5.9 succMobileEmergencyCalls succMobileEmergencyCalls ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 359}; C.3.5.10 ansMobileEmergencyCalls ansMobileEmergencyCalls ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3510}; C.3.5.11 attCipheringModeControlProcs attCipheringModeControlProcs ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3511}; C.3.5.12 succCipheringModeControlProcs succCipheringModeControlProcs ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3512}; C.3.5.13 attInterrogationOfHLRsForRouting attInterrogationOfHLRsForRouting ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 168 (GSM 12.04 version 7.0.0 Release 1998) BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3513}; C.3.5.14 succInterrogationOfHLRsMSRNObtained succInterrogationOfHLRsMSRNObtained ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3514}; C.3.5.15 succInterrogationOfHLRsCallForwarding succInterrogationOfHLRsCallForwarding ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3515}; C.3.5.16 attOpForMobileOriginatingPointToPointSMs attOpForMobileOriginatingPointToPointSMs ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3516}; C.3.5.17 succOpForMobileOriginatingPointToPointSMs succOpForMobileOriginatingPointToPointSMs ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3517}; C.3.5.18 attOpForMobileTerminatingPointToPointSMs attOpForMobileTerminatingPointToPointSMs ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3518}; C.3.5.19 succOpForMobileTerminatingPointToPointSMs succOpForMobileTerminatingPointToPointSMs ATTRIBUTE ETSI ETSI TS 100 615 V7.0.0 (2000-02) 169 (GSM 12.04 version 7.0.0 Release 1998) WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3519}; C.3.5.20 nbrOfTransCheckIMEIRequests nbrOfTransCheckIMEIRequests ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3520}; C.3.5.21 nbrOfWhiteAnsInMSC nbrOfWhiteAnsInMSC ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3521}; C.3.5.22 nbrOfGreyAnsInMSC nbrOfGreyAnsInMSC ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3522}; C.3.5.23 nbrOfBlackAnsInMSC nbrOfBlackAnsInMSC ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3523}; C.3.5.24 nbrOfUnknownIMEIAnsInMSC nbrOfUnknownIMEIAnsInMSC ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3524}; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 170 (GSM 12.04 version 7.0.0 Release 1998) C.3.5.25 meanTimeToCallSetupService meanTimeToCallSetupService ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType2; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3525}; C.3.5.26 meanTimeToLocationUpdateService meanTimeToLocationUpdateService ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType2; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3526}; C.3.5.27 transSubIdentifiedWithTMSI transSubIdentifiedWithTMSI ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3527}; C.3.5.28 transSubIdentifiedWithIMSI transSubIdentifiedWithIMSI ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3528}; C.3.5.29 attTMSIReallocations attTMSIReallocations ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3529}; C.3.5.30 succTMSIReallocations succTMSIReallocations ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 171 (GSM 12.04 version 7.0.0 Release 1998) REGISTERED AS {gsm1204attribute 3530}; C.3.5.31 imsiDetachProcs imsiDetachProcs ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3531}; C.3.5.32 imsiAttachProcs imsiAttachProcs ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3532}; C.3.5.33 attIncomingExternalIntraMSCHDOs attIncomingExternalIntraMSCHDOs ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3533}; C.3.5.34 succIncomingExternalIntraMSCHDOs succIncomingExternalIntraMSCHDOs ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3534}; C.3.5.35 attOutgoingExternalIntraMSCHDOs attOutgoingExternalIntraMSCHDOs ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3535}; C.3.5.36 succOutgoingExternalIntraMSCHDOs succOutgoingExternalIntraMSCHDOs ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 172 (GSM 12.04 version 7.0.0 Release 1998) BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3536}; C.3.5.37 attIncomingInterMSCHDOs attIncomingInterMSCHDOs ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3537}; C.3.5.38 succIncomingInterMSCHDOs succIncomingInterMSCHDOs ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3538}; C.3.5.39 attOutgoingInterMSCHDOs attOutgoingInterMSCHDOs ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3539}; C.3.5.40 succOutgoingInterMSCHDOs succOutgoingInterMSCHDOs ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3540}; C.3.5.41 attSubsequentInterMSCHDOsMSCa attSubsequentInterMSCHDOsMSCa ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3541}; C.3.5.42 succSubsequentInterMSCHDOsMSCa succSubsequentInterMSCHDOsMSCa ATTRIBUTE ETSI ETSI TS 100 615 V7.0.0 (2000-02) 173 (GSM 12.04 version 7.0.0 Release 1998) WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3542}; C.3.5.43 attSubsequentInterMSCHDOsMSCc attSubsequentInterMSCHDOsMSCc ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3543}; C.3.5.44 succSubsequentInterMSCHDOsMSCc succSubsequentInterMSCHDOsMSCc ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3544}; C.3.5.45 externalHDOs externalHDOs ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3545}; C.3.5.46 externalHDOsPerCause externalHDOsPerCause ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType3; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3546}; C.3.5.47 unsuccExternHDOsWithReconnectionPerMSC unsuccExternHDOsWithReconnectionPerMSC ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3547}; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 174 (GSM 12.04 version 7.0.0 Release 1998) C.3.5.48 unsuccExternHDOsWithLossOfConnectionPerMSC unsuccExternHDOsWithLossOfConnectionPerMSC ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3548}; C.3.6 external HDO Measurement Function Related Attributes C.3.6.1 attIncomingExternalIntraMSCHDOsPerOriginatingCell attIncomingExternalIntraMSCHDOsPerOriginatingCell ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 361}; C.3.6.2 succIncomingExternalIntraMSCHDOsPerOriginatingCell succIncomingExternalIntraMSCHDOsPerOriginatingCell ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 362}; C.3.6.3 attOutgoingExternalIntraMSCHDOsPerTargetCell attOutgoingExternalIntraMSCHDOsPerTargetCell ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 363}; C.3.6.4 succOutgoingExternalIntraMSCHDOsPerTargetCell succOutgoingExternalIntraMSCHDOsPerTargetCell ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 364}; C.3.6.5 attIncomingInterMSCHDOsPerOriginatingCell attIncomingInterMSCHDOsPerOriginatingCell ATTRIBUTE WITH ATTRIBUTE SYNTAX ETSI ETSI TS 100 615 V7.0.0 (2000-02) 175 (GSM 12.04 version 7.0.0 Release 1998) GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 365}; C.3.6.6 succIncomingInterMSCHDOsPerOriginatingCell succIncomingInterMSCHDOsPerOriginatingCell ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 366}; C.3.6.7 attOutgoingInterMSCHDOsPerTargetCell attOutgoingInterMSCHDOsPerTargetCell ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 367}; C.3.6.8 succOutgoingInterMSCHDOsPerTargetCell succOutgoingInterMSCHDOsPerTargetCell ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 368}; C.3.7 HLR Measurement Function Related Attributes C.3.7.1 nbrOfCurrentMSsRoamingOutsideHPLMN nbrOfCurrentMSsRoamingOutsideHPLMN ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 371}; C.3.7.2 attReqForAuthSetsReceivedByHLRFromVLRs attReqForAuthSetsReceivedByHLRFromVLRs ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 372}; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 176 (GSM 12.04 version 7.0.0 Release 1998) C.3.7.3 succReturnedAuthSetsFromHLRToVLRs succReturnedAuthSetsFromHLRToVLRs ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 373}; C.3.7.4 emptyResponsesForAuthSetsFromHLRToVLRs emptyResponsesForAuthSetsFromHLRToVLRs ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 374}; C.3.7.5 attInsertSubDataService attInsertSubDataService ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 375}; C.3.7.6 succInsertSubDataService succInsertSubDataService ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 376}; C.3.7.7 attLocationUpdate attLocationUpdate ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 377}; C.3.7.8 succLocationUpdate succLocationUpdate ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 177 (GSM 12.04 version 7.0.0 Release 1998) REGISTERED AS {gsm1204attribute 378}; C.3.7.9 attSSRelatedOperationsInHLR attSSRelatedOperationsInHLR ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType5; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 379}; C.3.7.10 succSSRelatedOperationsInHLR succSSRelatedOperationsInHLR ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType5; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3710}; C.3.7.11 attReqForSMRoutingInfo attReqForSMRoutingInfo ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3711}; C.3.7.12 succReqForSMRoutingInfo succReqForSMRoutingInfo ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3712}; C.3.7.13 attSMDeliveryStatusReportProcs attSMDeliveryStatusReportProcs ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3713}; C.3.7.14 succSMDeliveryStatusReportProcs succSMDeliveryStatusReportProcs ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 178 (GSM 12.04 version 7.0.0 Release 1998) BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3714}; C.3.7.15 attNbrOfSendAlerts attNbrOfSendAlerts ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3715}; C.3.7.16 succNbrOfSendAlerts succNbrOfSendAlerts ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3716}; C.3.7.17 attReqForMSRN attReqForMSRN ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3717}; C.3.7.18 succReqForMSRN succReqForMSRN ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3718}; C.3.8 VLR Measurement Function Related Attributes C.3.8.1 attMSMemoryAvailableNotifications attMSMemoryAvailableNotifications ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 381}; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 179 (GSM 12.04 version 7.0.0 Release 1998) C.3.8.2 succMSMemoryAvailableNotifications succMSMemoryAvailableNotifications ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 382}; C.3.8.3 attIdentificationReqToPVLRs attIdentificationReqToPVLRs ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 383}; C.3.8.4 succIdentificationReqToPVLRs succIdentificationReqToPVLRs ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 384}; C.3.8.5 attPageReqs attPageReqs ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 385}; C.3.8.6 succPageReqs succPageReqs ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 386}; C.3.8.7 attPageReqsPerLocationArea attPageReqsPerLocationArea ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType6; BEHAVIOUR generalMeasurementAttributeBehaviour; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 180 (GSM 12.04 version 7.0.0 Release 1998) REGISTERED AS {gsm1204attribute 387}; C.3.8.8 succPageReqsPerLocationArea succPageReqsPerLocationArea ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType6; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 388}; C.3.8.9 attReqForAuthSetsSentToHLR attReqForAuthSetsSentToHLR ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 389}; C.3.8.10 succReceivedAuthSetsFromHLR succReceivedAuthSetsFromHLR ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3810}; C.3.8.11 emptyResponsesForAuthFromHLR emptyResponsesForAuthFromHLR ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3811}; C.3.8.12 attAuthProcsInVLR attAuthProcsInVLR ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3812}; C.3.8.13 succAuthProcsInVLR succAuthProcsInVLR ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 181 (GSM 12.04 version 7.0.0 Release 1998) BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3813}; C.3.8.14 attIntraVLRLocationUpdates attIntraVLRLocationUpdates ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3814}; C.3.8.15 succIntraVLRLocationUpdates succIntraVLRLocationUpdates ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3815}; C.3.8.16 attInterVLRLocationUpdates attInterVLRLocationUpdates ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3816}; C.3.8.17 succInterVLRLocationUpdates succInterVLRLocationUpdates ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3817}; C.3.8.18 arrivalOfVisitorsFromOtherPLMNs arrivalOfVisitorsFromOtherPLMNs ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3818}; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 182 (GSM 12.04 version 7.0.0 Release 1998) C.3.9 EIR Measurement Function Related Attributes C.3.9.1 nbrOfReceivedIMEICheckReqs nbrOfReceivedIMEICheckReqs ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 391}; C.3.9.2 nbrOfWhiteAnsInEIR nbrOfWhiteAnsInEIR ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 392}; C.3.9.3 nbrOfGreyAnsInEIR nbrOfGreyAnsInEIR ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 393}; C.3.9.4 nbrOfBlackAnsInEIR nbrOfBlackAnsInEIR ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 394}; C.3.9.5 nbrOfUnknownIMEIAnsInEIR nbrOfUnknownIMEIAnsInEIR ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 395}; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 183 (GSM 12.04 version 7.0.0 Release 1998) C.3.10 SMS Measurement Function Related Attributes C.3.10.1 attMobileOriginatingSMForwardings attMobileOriginatingSMForwardings ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3101}; C.3.10.2 succMobileOriginatingSMForwardings succMobileOriginatingSMForwardings ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3102}; C.3.10.3 attMobileTerminatingSMForwardings attMobileTerminatingSMForwardings ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3103}; C.3.10.4 succMobileTerminatingSMForwardings succMobileTerminatingSMForwardings ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3104}; C.3.10.5 attMobileTerminatingSMForwardingsSgsn attMobileTerminatingSMForwardingsSgsn ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3104}; C.3.10.6 succMobileTerminatingSMForwardingsSgsn succMobileTerminatingSMForwardingsSgsn ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 184 (GSM 12.04 version 7.0.0 Release 1998) BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3106}; C.3.11 SGSN Measurement Function Related Attributes C.3.11.1 nbrLlcFramesSent nbrLlcFramesSent ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3111}; C.3.11.2 nbrllcFramesReceived nbrllcFramesReceived ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3112}; C.3.11.3 errLlcFramesDetectedBySgsn errLlcFramesDetectedBySgsn ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3113}; C.3.11.4 retransmittedLlcFramestoMs retransmittedLlcFramestoMs ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3114}; C.3.11.5 uplinkSndcpNpduReceived uplinkSndcpNpduReceived ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3115}; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 185 (GSM 12.04 version 7.0.0 Release 1998) C.3.11.6 uplinkSndcpOctetReceivedMode uplinkSndcpOctetReceivedMode ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3116}; C.3.11.7 downlinkSndcpNpdusent downlinkSndcpNpdusent ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3117}; C.3.11.8 downlinkSndcpOctetSent downlinkSndcpOctetSent ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3118}; C.3.11.9 attGprsAttach attGprsAttach ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3119}; C.3.11.10 succGprsAttach succGprsAttach ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31110}; C.3.11.11 attCombiAttach attCombiAttach ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 186 (GSM 12.04 version 7.0.0 Release 1998) REGISTERED AS {gsm1204attribute 31111}; C.3.11.12 succCombiAttach succCombiAttach ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31112}; C.3.11.13 attImsiAttach attImsiAttach ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31113}; C.3.11.14 succImsiAttach succImsiAttach ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31114}; C.3.11.15 nbrOfAttachedSub nbrOfAttachedSub ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31115}; C.3.11.16 meanNbrOfAttachedSub meanNbrOfAttachedSub ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31116}; C.3.11.17 maxNbrOfAttachedSub maxNbrOfAttachedSub ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 187 (GSM 12.04 version 7.0.0 Release 1998) BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31117}; C.3.11.18 attGprsDetachMs attGprsDetachMs ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31118}; C.3.11.19 attCombiDetachMs attCombiDetachMs ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31119}; C.3.11.20 attImsiDetachMs attImsiDetachMs ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31120}; C.3.11.21 attGprsdetachSgsn attGprsdetachSgsn ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31121}; C.3.11.22 succGprsdetachSgsn succGprsdetachSgsn ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31122}; C.3.11.23 attItraSgsnRaUpdate attItraSgsnRaUpdate ATTRIBUTE ETSI ETSI TS 100 615 V7.0.0 (2000-02) 188 (GSM 12.04 version 7.0.0 Release 1998) WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31123}; C.3.11.24 succIntraSgsnRaUpdate succIntraSgsnRaUpdate ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31124}; C.3.11.25 attInterSgsnRaUpdate attInterSgsnRaUpdate ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31125}; C.3.11.26 succInterSgsnRaUpdate succInterSgsnRaUpdate ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31126}; C.3.11.27 attPTMSIRealloc attPTMSIRealloc ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31127}; C.3.11.28 succPTMSIrealloc succPTMSIrealloc ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31128}; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 189 (GSM 12.04 version 7.0.0 Release 1998) C.3.11.29 attreqAuthSetsSentToHlrBySgsn attreqAuthSetsSentToHlrBySgsn ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31129}; C.3.11.30 succReqAuthSetsHlr SuccReqAuthSetsHlr ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31130}; C.3.11.31 emptyResponsesForAuthSetsFromHlr emptyResponsesForAuthSetsFromHlr ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31131}; C.3.11.32 attAuthInSgsn attAuthInSgsn ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31132}; C.3.11.33 succAuthInSgsn succAuthInSgsn ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31133}; C.3.11.34 attIdentityReq attIdentityReq ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 190 (GSM 12.04 version 7.0.0 Release 1998) REGISTERED AS {gsm1204attribute 31134}; C.3.11.35 succIdentityReq succIdentityReq ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31135}; C.3.11.36 attCipheringModeControlPerSgsn attCipheringModeControlPerSgsn ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31136}; C.3.11.37 succCipheringModeControlPerSgsn succCipheringModeControlPerSgsn ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31138}; C.3.11.38 nbrOfSubStandby nbrOfSubStandby ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31138}; C.3.11.39 meanNbrOfSubStandby meanNbrOfSubStandby ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31139}; C.3.11.40 maxNbrOfSubStandby maxNbrOfSubStandby ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 191 (GSM 12.04 version 7.0.0 Release 1998) BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31140}; C.3.11.41 nbrOfSubReady nbrOfSubReady ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31141}; C.3.11.42 meanNbrOfSubReady meanNbrOfSubReady ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31142}; C.3.11.43 maxNbrOfSubReady maxNbrOfSubReady ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31143}; C.3.11.44 nbrOfCheckIMEIRequests nbrOfCheckIMEIRequests ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31144}; C.3.11.45 nbrOfWhiteAnswerInSgsn nbrOfWhiteAnswerInSgsn ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31145}; C.3.11.46 nbrOfGreyAnswerInSgsn nbrOfGreyAnswerInSgsn ATTRIBUTE ETSI ETSI TS 100 615 V7.0.0 (2000-02) 192 (GSM 12.04 version 7.0.0 Release 1998) WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31146}; C.3.11.47 nbrOfBlackAnswerInSgsn nbrOfBlackAnswerInSgsn ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31147}; C.3.11.48 nbrOfUnknownAnswerInSgsn nbrOfUnknownAnswerInSgsn ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31148}; C.3.11.49 attPacketSwitchedPaging attPacketSwitchedPaging ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31149}; C.3.11.50 unsuccPacketSwitchedPaging unsuccPacketSwitchedPaging ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31150}; C.3.11.51 attPsPagingPerRoutingArea attPsPagingPerRoutingArea ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType7; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31151}; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 193 (GSM 12.04 version 7.0.0 Release 1998) C.3.11.52 unsuccPsPagingPerRoutingArea unsuccPsPagingPerRoutingArea ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType7; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31152}; C.3.11.53 attActPdpContextMSPerSgsn attActPdpContextMSPerSgsn ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31153}; C.3.11.54 succActPdpContextMSPerSgsn succActPdpContextMSPerSgsn ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31154}; C.3.11.55 attActPdpContextDynMSPerSgsn attActPdpContextDynMSPerSgsn ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31155}; C.3.11.56 succActPdpContextDynMSPerSgsn succActPdpContextDynMSPerSgsn ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31156}; C.3.11.57 attDeactPdpContextMsPerSgsn attDeactPdpContextMsPerSgsn ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 194 (GSM 12.04 version 7.0.0 Release 1998) REGISTERED AS {gsm1204attribute 31157}; C.3.11.58 succDeactPdpContextMsPerSgsn succDeactPdpContextMsPerSgsn ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31158}; C.3.11.59 attDeactPdpContextGgsnPerSgsn attDeactPdpContextGgsnPerSgsn ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31159}; C.3.11.60 succDeactPdpContextGgsnPerSgsn succDeactPdpContextGgsnPerSgsn ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31160}; C.3.11.61 nbrSubsWithActivePdpInSgsn nbrSubsWithActivePdpInSgsn ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31161}; C.3.11.62 meanSubsWithActivePdpInSgsn meanSubsWithActivePdpInSgsn ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31162}; C.3.11.63 nmaxSubsWithActivePdpInSgsn nmaxSubsWithActivePdpInSgsn ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR ETSI ETSI TS 100 615 V7.0.0 (2000-02) 195 (GSM 12.04 version 7.0.0 Release 1998) generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31163}; C.3.12 GGSN Measurement Function Related Attributes C.3.12.1 attActPdpContextPerApnOfGgsn attActPdpContextPerApnOfGgsn ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType8; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3121}; C.3.12.2 succActPdpContextPerApnOfGgsn succActPdpContextPerApnOfGgsn ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType8; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3122}; C.3.12.3 attActPdpContextDnyPerApnOfGgsn attActPdpContextDnyPerApnOfGgsn ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType8; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3123}; C.3.12.4 succActPdpContextDnyPerApnOfGgsn succActPdpContextDnyPerApnOfGgsn ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType8; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3124}; C.3.12.5 attDeactPdpContextMsPerApnOfGgsn attDeactPdpContextMsPerApnOfGgsn ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType8; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3125}; C.3.12.6 succDeactPdpContextMsPerApnOfGgsn succDeactPdpContextMsPerApnOfGgsn ATTRIBUTE ETSI ETSI TS 100 615 V7.0.0 (2000-02) 196 (GSM 12.04 version 7.0.0 Release 1998) WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType8; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3126}; C.3.12.7 attDeactPdpContextByGgsnPerApn attDeactPdpContextByGgsnPerApn ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType8; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3127}; C.3.12.8 succDeactPdpContextByGgsnMsPerApn succDeactPdpContextByGgsnMsPerApn ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType8; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3128}; C.3.12.9 nbrOfActivePdpContextsPerApnAtGgsn nbrOfActivePdpContextsPerApnAtGgsn ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType1; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 3129}; C.3.12.10 meanNbrOfActivePdpContextsPerApnAtGgsn meanNbrOfActivePdpContextsPerApnAtGgsn ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType8; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31210}; C.3.12.11 maxNbrOfActivePdpContextsPerApnAtGgsn maxNbrOfActivePdpContextsPerApnAtGgsn ATTRIBUTE WITH ATTRIBUTE SYNTAX GSM1204TypeModule.GSMMeasurementType8; BEHAVIOUR generalMeasurementAttributeBehaviour; REGISTERED AS {gsm1204attribute 31211}; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 197 (GSM 12.04 version 7.0.0 Release 1998) C.4 Name Bindings C.4.1 BSS Name Binding C.4.1.1 simpleScanner-bssFunction simpleScanner-bssFunction NAME BINDING SUBORDINATE OBJECT CLASS "Recommendation X.738: 1993": simpleScanner; NAMED BY SUPERIOR OBJECT CLASS "gsm1200: 1993": bssFunction; WITH ATTRIBUTE scannerId; CREATE; DELETE; REGISTERED AS {gsm1204nameBinding 411}; C.4.2 BSC Name Binding C.4.2.1 bscMeasurementFunction-bsc bscMeasurementFunction-bsc NAME BINDING SUBORDINATE OBJECT CLASS bscMeasurementFunction; NAMED BY SUPERIOR OBJECT CLASS "gsm1220: 1993": bsc; WITH ATTRIBUTE measurementFunctionId; CREATE; DELETE; REGISTERED AS {gsm1204nameBinding 421}; C.4.3 BTS Name Binding C.4.3.1 cellMeasurementFunction-bts cellMeasurementFunction-bts NAME BINDING SUBORDINATE OBJECT CLASS cellMeasurementFunction; NAMED BY SUPERIOR OBJECT CLASS "gsm1220: 1993": bts; WITH ATTRIBUTE measurementFunctionId; CREATE; DELETE; REGISTERED AS {gsm1204nameBinding 431}; C.4.3.2 internalHdoMeasurementFunction-bts internalHdoMeasurementFunction-bts NAME BINDING SUBORDINATE OBJECT CLASS internalHdoMeasurementFunction; NAMED BY SUPERIOR OBJECT CLASS "gsm1220: 1993": bts; WITH ATTRIBUTE measurementFunctionId; CREATE; DELETE; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 198 (GSM 12.04 version 7.0.0 Release 1998) REGISTERED AS {gsm1204nameBinding 432}; C.4.4 MSC Name Binding C.4.4.1 mscMeasurementFunction-mscFunction mscMeasurementFunction-mscFunction NAME BINDING SUBORDINATE OBJECT CLASS mscMeasurementFunction; NAMED BY SUPERIOR OBJECT CLASS "gsm1200: 1993": mscFunction; WITH ATTRIBUTE measurementFunctionId; CREATE; DELETE; REGISTERED AS {gsm1204nameBinding 441}; C.4.4.2 externalHdoMeasurementFunction-mscFunction externalHdoMeasurementFunction-mscFunction NAME BINDING SUBORDINATE OBJECT CLASS externalHdoMeasurementFunction; NAMED BY SUPERIOR OBJECT CLASS "gsm1200: 1993": mscFunction; WITH ATTRIBUTE measurementFunctionId; CREATE; DELETE; REGISTERED AS {gsm1204nameBinding 442}; C.4.4.3 simpleScanner-mscFunction simpleScanner mscFunction-NAME BINDING SUBORDINATE OBJECT CLASS "Recommendation X.738: 1993": simpleScanner; NAMED BY SUPERIOR OBJECT CLASS "gsm1200: 1993": mscFunction; WITH ATTRIBUTE scannerId; CREATE; DELETE; REGISTERED AS {gsm1204nameBinding 443}; C.4.5 HLR Name Binding C.4.5.1 hlrMeasurementFunction-hlrFunction hlrMeasurementFunction-hlrFunction NAME BINDING SUBORDINATE OBJECT CLASS hlrMeasurementFunction; NAMED BY SUPERIOR OBJECT CLASS "gsm1200: 1993": hlrFunction; WITH ATTRIBUTE measurementFunctionId; CREATE; DELETE; REGISTERED AS {gsm1204nameBinding 451}; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 199 (GSM 12.04 version 7.0.0 Release 1998) C.4.5.2 simpleScanner-hlrFunction simpleScanner-hlrFunction NAME BINDING SUBORDINATE OBJECT CLASS "Recommendation X.738: 1993": simpleScanner; NAMED BY SUPERIOR OBJECT CLASS "gsm1200: 1993": hlrFunction; WITH ATTRIBUTE scannerId; CREATE; DELETE; REGISTERED AS {gsm1204nameBinding 452}; C.4.6 VLR Name Binding C.4.6.1 vlrMeasurementFunction-vlrFunction vlrMeasurementFunction-vlrFunction NAME BINDING SUBORDINATE OBJECT CLASS vlrMeasurementFunction; NAMED BY SUPERIOR OBJECT CLASS "gsm1200: 1993": vlrFunction; WITH ATTRIBUTE measurementFunctionId; CREATE; DELETE; REGISTERED AS {gsm1204nameBinding 461}; C.4.6.2 simpleScanner-vlrFunction simpleScanner-vlrFunction NAME BINDING SUBORDINATE OBJECT CLASS "Recommendation X.738: 1993": simpleScanner; NAMED BY SUPERIOR OBJECT CLASS "gsm1200: 1993": vlrFunction; WITH ATTRIBUTE scannerId; CREATE; DELETE; REGISTERED AS {gsm1204nameBinding 462}; C.4.7 EIR Name Binding C.4.7.1 eirMeasurementFunction-eirFunction eirMeasurementFunction-eirFunction NAME BINDING SUBORDINATE OBJECT CLASS eirMeasurementFunction; NAMED BY SUPERIOR OBJECT CLASS "gsm1200: 1993": eirFunction; WITH ATTRIBUTE measurementFunctionId; CREATE; DELETE; REGISTERED AS {gsm1204nameBinding 471}; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 200 (GSM 12.04 version 7.0.0 Release 1998) C.4.7.2 simpleScanner-eirFunction simpleScanner-eirFunction NAME BINDING SUBORDINATE OBJECT CLASS "Recommendation X.738: 1993": simpleScanner; NAMED BY SUPERIOR OBJECT CLASS "gsm1200: 1993": eirFunction; WITH ATTRIBUTE scannerId; CREATE; DELETE; REGISTERED AS {gsm1204nameBinding 472}; C.4.8 SMS Name Binding C.4.8.1 smsMeasurementFunction-smsGIWFunction smsMeasurementFunction-smsGIWFunction NAME BINDING SUBORDINATE OBJECT CLASS smsMeasurementFunction; NAMED BY SUPERIOR OBJECT CLASS "gsm1200: 1993": smsGIWFunction; WITH ATTRIBUTE measurementFunctionId; CREATE; DELETE; REGISTERED AS {gsm1204nameBinding 481}; C.4.8.2 simpleScanner-smsGIWFunction simpleScanner-smsGIWFunction NAME BINDING SUBORDINATE OBJECT CLASS "Recommendation X.738: 1993": simpleScanner; NAMED BY SUPERIOR OBJECT CLASS "gsm1200: 1993": smsGIWFunction; WITH ATTRIBUTE scannerId; CREATE; DELETE; REGISTERED AS {gsm1204nameBinding 482}; C.4.9 SGSN Name Binding Enter sgsn Name binding to network element function C.4.9.1 sgsnMeasurementFunction-sgsnFunction sgsnMeasurementFunction-sgsnFunction NAME BINDING SUBORDINATE OBJECT CLASS sgsnMeasurementFunction; NAMED BY SUPERIOR OBJECT CLASS "gsm1200: 1993": sgsnFunction; WITH ATTRIBUTE measurementFunctionId; CREATE; DELETE; REGISTERED AS {gsm1204nameBinding 491}; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 201 (GSM 12.04 version 7.0.0 Release 1998) C.4.9.2 simpleScanner-sgsnFunction simpleScanner-sgsnFunction NAME BINDING SUBORDINATE OBJECT CLASS "Recommendation X.738: 1993": simpleScanner; NAMED BY SUPERIOR OBJECT CLASS "gsm1200: 1993": sgsnFunction; WITH ATTRIBUTE scannerId; CREATE; DELETE; REGISTERED AS {gsm1204nameBinding 492}; C.4.10 GGSN Name Binding Enter ggsn Name binding to network element function C.4.10.1 ggsnMeasurementFunction-vlrFunction ggsnMeasurementFunction-ggsnFunction NAME BINDING SUBORDINATE OBJECT CLASS ggsnMeasurementFunction; NAMED BY SUPERIOR OBJECT CLASS "gsm1200: 1993": vlrFunction; WITH ATTRIBUTE measurementFunctionId; CREATE; DELETE; REGISTERED AS {gsm1204nameBinding 4101}; C.4.10.2 simpleScanner-ggsnFunction simpleScanner-ggsnFunction NAME BINDING SUBORDINATE OBJECT CLASS "Recommendation X.738: 1993": simpleScanner; NAMED BY SUPERIOR OBJECT CLASS "gsm1200: 1993": ggsnFunction; WITH ATTRIBUTE scannerId; CREATE; DELETE; REGISTERED AS {gsm1204nameBinding 4102}; C.5 Behaviour Definitions C.5.1 simple scanner behaviour The behaviour of the simple scanner is defined in [ISO 10164-13] section 8.1.1.3. C.5.2 general measurement function behaviour generalMeasurementFunctionBehaviour BEHAVIOUR DEFINED AS "This object is defined to contain the various optional measurement packages, and one or more instances of this class may exist in the scope of the containing object. The scanner may scan the attributes of the object class in various combinations and ETSI ETSI TS 100 615 V7.0.0 (2000-02) 202 (GSM 12.04 version 7.0.0 Release 1998) permutations of packages, and further may scan simultaneously as many times as necessary within the processing limits of the network." ; C.5.3 general measurement package behaviour generalMeasurementPackageBehaviour BEHAVIOUR DEFINED AS "Measurement packages are present in the Measurement Function Object (e.g. BSC Measurement Function), if the Network Element Function (e.g. BSC) containing the Measurement Function Object supports the required number of instances of the measurement included in the package according to the number of instances of the Measurement Function. The simple scanner has been designed to read the values of the attributes according to a given schedule." ; C.5.4 general measurement attribute behaviour generalMeasurementAttributeBehaviour BEHAVIOUR DEFINED AS "The measurement that corresponds to this attribute, is described in annex B. The name of this attribute is given in the description part (D) of each measurement definition contained in annex B." Note: to enable this attribute to be easily located, an index of these attributes is listed at the end of the present document. ; C.6Abstract syntax definitions This clause contains the ASN.1 module defining the attribute, Action and notification syntax's referenced by the attribute, Action and notification templates. GSM1204TypeModule{ ccitt (0) identified-organization (4) etsi (0) mobileDomain (0) gsm-Operation-Maintenance (3) gsm-12-04 (4) informationModel (0) asn1Module (2) asn1TypeModule (0) } DEFINITIONS IMPLICIT TAGS ::= BEGIN IMPORTS gsm-12-04 FROM GSM-DomainDefinitions{ ccitt (0) identified-organisation (4) etsi (0) mobileDomain (0) gsm-Operation-Maintenance (3) gsm-12-30 (30) informationModel (0) asn1Module (2) gsm-OM-DomainDefinitions (0) version1 (1)} ; -- Object Identifiers. -- Abstract Syntax gsm1204abstractSyntax OBJECT IDENTIFIER ::= {gsm-12-04 protocolSupport (1) abstractSyntax (1)} -- ETSI ETSI TS 100 615 V7.0.0 (2000-02) 203 (GSM 12.04 version 7.0.0 Release 1998) -- Information Model Related Identifiers gsm1204informationModel OBJECT IDENTIFIER ::= {gsm-12-04 informationModel (0)} gsm1204managedObjectClass OBJECT IDENTIFIER ::= {gsm1204informationModel managedObjectClass (3)} gsm1204package OBJECT IDENTIFIER ::= {gsm1204informationModel package (4)} gsm1204nameBinding OBJECT IDENTIFIER ::= {gsm1204informationModel nameBinding (6)} gsm1204attribute OBJECT IDENTIFIER ::= {gsm1204informationModel attribute (7)} -- Application Contexts gsm1204ApplicationContext OBJECT IDENTIFIER ::= {gsm-12-04 protocolSupport (1) applicationContext (0) gsm-Management (0)} -- The following measurement types are defined. GSMMeasurementType1 ::= INTEGER GSMMeasurementType2 ::= REAL GSMMeasurementType3 ::= SET OF SEQUENCE{ cause Cause, value INTEGER } Cause ::= INTEGER{ -- CM_SERVICE REJECT causes (GSM 04.08 [2]): imsiUnknownInHlr ( 1), illegalMs ( 2), imsiUnknownInVlr ( 3), imeiNotAccepted ( 4), illegalMe ( 5), plmnNotAllowed ( 6), locationAreaNotAllowed ( 7), nationalRoamingNotAllowedInLocationArea ( 8), networkFailure ( 9), congestion (10), serviceOptionNotSupported (11), requestedServiceOptionNotSubscribed (12), serviceOptionTemporarilyOutOfOrder (13), callCannotBeIdentified (14), semanticallyIncorrectMessage (15), invalidMandatoryInformation (16), messageTypeNonExistentOrNotImplemented (17), messageTypeNotCompatibleWithProtocolState (18), informationElementNonExistentOrNotImplemented (19), conditionalIeError (20), messageNotCompatibleWithProtocolState (21), protocolError (22), reservedRejectCause (23), -- Internal and external Handover causes (GSM 08.08 [5]): uplinkQuality (24), uplinkStrength (25), downlinkQuality (26), downlinkStrenght (27), distance (28), betterCell (29), operationAndMaintenanceIntervention (30), directedRetry (31), ETSI ETSI TS 100 615 V7.0.0 (2000-02) 204 (GSM 12.04 version 7.0.0 Release 1998) -- valid for external handovers only: responseToMscInvocation (32), -- Immediate assignment procedure causes (GSM 04.08 [2]): emergencyCall (33), callReEstablishment (34), answerToPaging (35), originatingCall (36), locationUpdating (37), otherProcedures (38), reservedEstablishmentCause (39) } -- Interference band definitions (GSM 04.08 [2]): GSMMeasurementType4 ::= SEQUENCE{ channelsPerInterferenceBand1 REAL, channelsPerInterferenceBand2 REAL, channelsPerInterferenceBand3 REAL, channelsPerInterferenceBand4 REAL, channelsPerInterferenceBand5 REAL } GSMMeasurementType5 ::= SET OF SEQUENCE{ ssOperation SSOperation, value INTEGER } -- SS operation definitions(GSM 09.02 [7]): SSOperation ::= INTEGER{ register (0), erase (1), activate (2), deactivate (3), registerPassword (4), interrogateSSOperation (5), processRequest (6) } GSMMeasurementType6 ::= SET OF SEQUENCE{ locationAreaCode LAC, value INTEGER } LAC ::= INTEGER (0..65535) GSMMeasurementFunctionId ::= INTEGER GSMCellName ::= SEQUENCE{ cellId INTEGER(0..65535), locatioAreaCode LAC } GSMMeasurementType7 ::= SET OF SEQUENCE{ routingAreaCode RAC, value INTEGER } RAC ::= INTEGER (0..255) GSMMeasurementType8 ::= SET OF SEQUENCE{ AccessPoint NameLogicalLinkID APNID, value INTEGER } ETSI ETSI TS 100 615 V7.0.0 (2000-02) 205 (GSM 12.04 version 7.0.0 Release 1998) APNID ::= INTEGER (0..65535) Editors Note: The APN Logical Link ID, is a numeric value for the assigned to each APN link in the GGSN. The ID is only unique when presented together with thew GGSN address. END ETSI ETSI TS 100 615 V7.0.0 (2000-02) 206 (GSM 12.04 version 7.0.0 Release 1998) Annex D (normative): Data Transfer Requirements This annex defines the data transfer requirements from the NE to the OS for this specification. This specification makes use of the generic approach to EFD, Log and File transfer facility as defined in GSM 12.00 [8]. D.1 Data Transfer Requirements D.1.1 General The GSM 12.04 defines how statistical information concerning various aspects of the NE's can be collected. Once this data is collected and available in the NE, it shall be possible to transfer it to the OS. The way in which this can be achieved is described in GSM 12.00 [8]. GSM 12.00 [8] describes the generic solutions to data transfer requirements which are used by GSM 12.04. This annex describes the additional information required to fully satisfy the data transfer requirements of GSM 12.04, containment of which is described in annex C. Of the data transfer functions described in GSM 12.00 [8], GSM 12.04 requires the upload function, i.e. OS controlled data transfer from NE to OS. D.2 Object Model D.2.1 Managed Object Classes D.2.1.1 "Recommendation X.721: 1992": log Object instances of this class are used to store incoming event reports. An instance of this class can be created to store specifically scan report notifications (in form of "scanReportRecords" managed objects). This is achieved by using the discriminator construct and filtering on the event type information. D.2.1.2 "Recommendation X.738: 1993": scanReportRecord Objects of this class are used to represent logged information that resulted from Attribute Value Change Notifications and are contained in a 'log' instance. D.2.2 Name Bindings D.2.2.1 log-managedElement log-managedElement NAME BINDING SUBORDINATE OBJECT CLASS "Recommendation X.721: 1992": log; NAMED BY SUPERIOR OBJECT CLASS "Recommendation M.3100: 1992": managedElement; WITH ATTRIBUTE "Recommendation X.721: 1992": logId; CREATE; DELETE; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 207 (GSM 12.04 version 7.0.0 Release 1998) REGISTERED AS { gsm1204NameBinding 221 }; D.2.2.2 scanReportRecord-log scanReportRecord-log NAME BINDING SUBORDINATE OBJECT CLASS "Recommendation X.738: 1993": scanReportRecord; NAMED BY SUPERIOR OBJECT CLASS "Recommendation X.721: 1992": log; WITH ATTRIBUTE "Recommendation X.721: 1992": logRecordId; DELETE; REGISTERED AS { gsm1204NameBinding 222 }; ETSI ETSI TS 100 615 V7.0.0 (2000-02) 208 (GSM 12.04 version 7.0.0 Release 1998) Annex E (informative): Non Standardised Measurements of Interest to PLMN Management Following is the template used to describe the measurements contained in this annex. A. Description A short explanation of the measurement operation. B. Collection Method The form in which this measurement data is obtained: - CC (Cumulative Counter). - GAUGE (dynamic variable), used when data being measured can vary up or down during the period of measurement. - DER (Discrete Event Registration), when data related to a particular event are captured every nth event is registered, where n can be 1 or larger. - SI (Status Inspection). Inception of annex E The annex E has been created to contain all the measurements that are NOT candidates for standardisation, (indication that they have been considered). At the end of the annex there are also references to the Fixed Network measurements, which have been included for completeness. NOTE: The measurements in this annex are for information only and as a consequence are NOT included in the Object Model (annex C). E.1 Measurement Related to the BSC E.1.1 BSC Measurement Function None. E.2 Measurement Related to the BTS E.2.1 BTS Measurement Function None. E.2.2 CELL Measurement Function None. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 209 (GSM 12.04 version 7.0.0 Release 1998) E.2.3 Internal HDO Measurement Function None. E.3 Measurement Related to the MSC E.3.1 MSC Measurement Function E.3.1.1 Attempted Mobile to Mobile Calls A. This measurement provides the number of mobile to mobile call attempts received by the MSC. B. CC. E.3.1.2 Successful Mobile to Mobile Calls A. This measurement provides the number of successful mobile to mobile calls. B. CC. E.3.1.3 Answered Mobile to Mobile Calls A. This measurement counts the number of answered mobile to mobile calls. B. CC. E.3.1.4 Attempted Mobile to Land Calls A. This measurement provides the number of mobile to land call attempts received by the MSC. B. CC. E.3.1.5 Successful Mobile to Land Calls A. This measurement provides the number of successful mobile to land calls. B. CC. E.3.1.6 Answered Mobile to Land Calls A. This measurement provides the number of answered mobile to land calls. B. CC. E.3.1.7 Attempted Land to Mobile Calls A. This measurement provides the number of land to mobile call attempts received by the MSC. B. CC. E.3.1.8 Successful Land to Mobile Calls A. This measurement provides the number of successful land to mobile calls. B. CC. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 210 (GSM 12.04 version 7.0.0 Release 1998) E.3.1.9 Answered Land to Mobile Calls A. This measurement indicates the number of answered land to mobile calls. B. CC. E.3.1.10 Mean Holding Time of Calls A. This measurement provides the mean holding time of calls. B. CC. E.3.2 External HDO Measurement Function None. E.4 Measurements related to the HLR E.4.1 HLR Measurement Function E.4.1.1 Instantaneous number of HLR subscribers A. This measurement provides a running total of the number of subscribers for whom information is currently held the HLR. B. SI. E.4.1.2 Barred subscribers in the HLR A. This measurement provides the number of barred subscribers in the HLR. B. SI. E.4.1.3 Bearer service indication A. This measurement provides the number of subscribers with the specified bearer service. B. CC. E.4.1.4 SS operation indication A. This measurement provides the number of subscribers with the specified SS operation. B. CC. E.4.1.5 Attempted requests for Authentication sets from the AUC by the HLR A. This measurement counts the number of triplets requested from the AUC by the HLR. B. CC. E.4.1.6 Successful returned Authentication sets from the AUC to the HLR A. This measurement counts the successfully returned triplets from the AUC to the HLR. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 211 (GSM 12.04 version 7.0.0 Release 1998) B. CC. E.5 Measurements related to the VLR E.5.1 VLR Measurement Function E.5.1.1 Subscribers from other PLMNs registered in the VLR A. This measurement provides the number of subscribers of other PLMNs registered in the VLR. B. SI. E.5.1.2 Number of roamers in the VLR A. This measurement provides the number of roamers which are registered in the VLR. B. SI. E.6 Measurements related to the EIR None. E.7 Measurements related to the SMS-IWMSC/GMSC None. E.8 Performance Measurements on non-specific GSM Objects E.8.1 Measurements related to a PCM system According to CCITT Recommendation Q.79x. E.8.2 Measurements related to MTP According to CCITT Recommendation Q.79x. E.8.3 Measurements related to SCCP and TCAP According to CCITT Recommendation Q.79x. E.8.4 Measurements related to ISUP According to CCITT Recommendation Q.79x. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 212 (GSM 12.04 version 7.0.0 Release 1998) E.8.5 Measurements related to Internet Protocols According to IETF RFC Recommendations. ETSI ETSI TS 100 615 V7.0.0 (2000-02) 213 (GSM 12.04 version 7.0.0 Release 1998) Annex F (informative): Index of Measurement Attribute Names The measurement description (part D of annex B) provides for each measurement the equivalent measurement attribute name. This clause provides an index of all the attribute names which are used in annex B. This index is provided to enable the reader to forward or backward reference, these attributes in annex C. Measurement Attribute Name: Page allAvailableSDCCHAllocatedTime, 56 allAvailableTCHAllocatedTime, 54 ansMobileEmergencyCalls, 69 ansMobileOriginatingCalls, 67 ansMobileTerminatingCalls, 68 arrivalOfVisitorsFromOtherPLMNs, 91 attAuthProcsInVLR, 90 attCipheringModeControlProcs, 69 attIdentificationReqToPVLRs, 87 attImmediateAssingProcs, 50 attImmediateAssingProcsPerBSC, 46 attImmediateAssingProcsPerCause, 51, 63 attIncomingExternalIntraMSCHDOs, 75 attIncomingExternalIntraMSCHDOsPerOriginatingCell, 79 attIncomingInterMSCHDOs, 76 attIncomingInterMSCHDOsPerOriginatingCell, 81 attIncomingInternalInterCellHDOs, 58 attIncomingInternalInterCellHDOsPerOriginatingCell, 65 attInsertSubDataService, 83 attInterrogationOfHLRsForRouting, 69 attInterVLRLocationUpdates, 91 attIntraVLRLocationUpdates, 90 attLocationUpdate, 83 attMobileEmergencyCalls, 68 attMobileOriginatingCalls, 66 attMobileOriginatingSMForwardings, 93 attMobileTerminatingCalls, 67 attMobileTerminatingSMForwardings, 94 attMSMemoryAvailableNotifications, 87 attNbrOfSendAlerts, 86 attOpForMobileOriginatingPointToPointSMs, 70 attOpForMobileTerminatingPointToPointSMs, 71 attOutgoingExternalIntraMSCHDOs, 75 attOutgoingExternalIntraMSCHDOsPerTargetCell, 80 attOutgoingInterMSCHDOs, 76 attOutgoingInterMSCHDOsPerTargetCell, 81 attOutgoingInternalInterCellHDOs, 59 attOutgoingInternalInterCellHDOsPerTargetCell, 65 attPageReqs, 88 attPageReqsPerLocationArea, 88 attReqForAuthSetsReceivedByHLR, 82 attReqForAuthSetsSentToHLR, 89 attReqForMSRN, 86 attReqForSMRoutingInfo, 84 attSDCCHSeizuresMeetingSDCCHBlockedState, 56 attSMDeliveryStatusReportProcs, 85 attSSRelatedOperationsInHLR, 84 attSubsequentInterMSCHDOsMSCa, 77 attSubsequentInterMSCHDOsMSCc, 78 ETSI ETSI TS 100 615 V7.0.0 (2000-02) 214 (GSM 12.04 version 7.0.0 Release 1998) attTCHSeizures, 53 attTCHSeizuresMeetingTCHBlockedState, 54 attTransOfPagingMessagesPerBSC, 45 attTransOfPagingMessagesThePCH, 49, 62 emptyResponsesForAuthFromHLR, 89 emptyResponsesForAuthSetsFromHLR, 83 externalHDOs, 78 externalHDOsPerCause, 78 imsiAttachProcs, 75 imsiDetachProcs, 74 maxNbrOfBusySDCCHs, 56 maxNbrOfBusyTCHs, 53, 62 meanDurationOfSuccPagingProcs, 52 meanInterArrivalTime, 45, 49 meanNbrOfBusySDCCHs, 56 meanNbrOfBusyTCHs, 52, 61 meanNbrOfIdleTCHsPerInterferenceBand, 53 meanPCHAGCHQueueLength, 49, 63 meanSDCCHQueueLength, 57 meanTCHBusyTime, 54 meanTCHQueueLength, 55 meanTimeToCallSetupService, 73 meanTimeToLocationUpdateService, 73 nbrOfAvailableSDCCHs, 55 nbrOfAvailableTCHs, 52 nbrOfBlackAnsInEIR, 93 nbrOfBlackAnsInMSC, 72 nbrOfClassMarkUpdates, 66 nbrOfCurrentMSsRoamingOutsideHPLMN, 82 nbrOfGreyAnsInEIR, 92 nbrOfGreyAnsInMSC, 72 nbrOfLostRadioLinksSDCCH, 57 nbrOfLostRadioLinksTCH, 55 nbrOfPagesDiscardedFromPCHQueue, 51, 63 nbrOfReceivedIMEICheckReqs, 92 nbrOfTransCheckIMEIRequests, 71 nbrOfUnknownIMEIAnsInEIR, 93 nbrOfUnknownIMEIAnsInMSC, 72 nbrOfWhiteAnsInEIR, 92 nbrOfWhiteAnsInMSC, 71 relativeTimeDLPowerControlAtMax, 57 relativeTimeULPowerControlAtMax, 58 succAuthProcsInVLR, 90 succCipheringModeControlProcs, 69 succIdentificationReqToPVLRs, 88 succImmediateAssingProcsPerBSC, 46 succImmediateAssingProcsPerCause, 51, 64 succIncomingExternalIntraMSCHDOs, 75 succIncomingExternalIntraMSCHDOsPerOriginatingCell, 80 succIncomingInterMSCHDOs, 76 succIncomingInterMSCHDOsPerOriginatingCell, 81 succIncomingInternalInterCellHDOs, 59 succIncomingInternalInterCellHDOsPerOriginatingCell, 65 succInsertSubDataService, 83 succInternalHDOsIntraCell, 58 succInternalHDOsIntraCellPerBSC, 47 succInternalHDOsPerBSC, 47 succInternalHDOsPerCause, 47 succInterrogationOfHLRsCallForwarding, 70 succInterrogationOfHLRsMSRNObtained, 70 ETSI ETSI TS 100 615 V7.0.0 (2000-02) 215 (GSM 12.04 version 7.0.0 Release 1998) succInterVLRLocationUpdates, 91 succIntraVLRLocationUpdates, 91 succLocationUpdate, 84 succMobileEmergencyCalls, 68 succMobileOriginatingCalls, 67 succMobileOriginatingSMForwardings, 94 succMobileTerminatingCalls, 67 succMobileTerminatingSMForwardings, 94 succMSMemoryAvailableNotifications, 87 succNbrOfSendAlerts, 86 succOpForMobileOriginatingPointToPointSMs, 70 succOpForMobileTerminatingPointToPointSMs, 71 succOutgoingExternalIntraMSCHDOs, 76 succOutgoingExternalIntraMSCHDOsPerTargetCell, 80 succOutgoingInterMSCHDOs, 77 succOutgoingInterMSCHDOsPerTargetCell, 81 succOutgoingInternalInterCellHDOs, 59 succOutgoingInternalInterCellHDOsPerTargetCell, 66 succPageReqs, 88 succPageReqsPerLocationArea, 89 succReceivedAuthSetsFromHLR, 89 succReqForMSRN, 86 succReqForSMRoutingInfo, 85 succReturnedAuthSetsFromHLR, 82 succSMDeliveryStatusReportProcs, 85 succSSRelatedOperationsInHLR, 84 succSubsequentInterMSCHDOsMSCa, 77 succSubsequentInterMSCHDOsMSCc, 78 succTCHSeizures, 54, 64 succTMSIReallocations, 74 transSubIdentifiedWithIMSI, 74 transSubIdentifiedWithTMSI, 73 unsuccExternHDOsWithLossOfConnectionPerMSC, 79 unsuccExternHDOsWithReconnectionPerMSC, 79 unsuccHDOsWithLossOfConnection, 60 unsuccHDOsWithReconnection, 59 unsuccInternalHDOsIntraCell, 58 unsuccInternalHDOsIntraCellPerBSC, 47 unsuccInternalHDOsWithLossOfConnectionPerBSC, 48 unsuccInternalHDOsWithReconnectionPerBSC, 48 unsuccReqsForService, 45 unsuccReqsForServicePerCause, 45 unsuccTransOfPagingMessagesPerBSC, 46 unsuccTransOfPagingMessagesThePCH, 50 ETSI ETSI TS 100 615 V7.0.0 (2000-02) 216 (GSM 12.04 version 7.0.0 Release 1998) Annex G (informative): Bibliography This subclause provides references to documents which are not directly referenced by the present document, but nevertheless are useful for back ground information on this subject. - CCITT Recommendation. E.500 - E.600: "Traffic Engineering". - CCITT Recommendation M.3010: "Principles for Telecommunications Management Network". - CCITT Recommendation M.3200: "TMN Management Services: Overview". - CCITT Recommendation M.3400: "TMN Management Functions". - CCITT Recommendation M.251: "Maintenance functions to be implemented in CCITT-MML". - CCITT Recommendation Q.542: "Design objectives - Operations and Maintenance". - CCITT Recommendation Q.544: "Exchange measurements". - CCITT Recommendation Q.822: "Stage 1, stage 2 and stage 3 description for the Q3 interface - Performance management". - CCITT Recommendation Z.336: "Traffic Measurement Administration". ETSI ETSI TS 100 615 V7.0.0 (2000-02) 217 (GSM 12.04 version 7.0.0 Release 1998) Annex H (informative): Change history This annex lists all phase2+ change requests approved for the present document by ETSI SMG. SMG# SMG tdoc SMG6 tdoc VERS CR RV PH CAT SUBJECT Resulting Version s30 P-99-665 6-99-053 4.3.1 A001 R98 B Addition of GPRS meansurements 7.0.0 ETSI ETSI TS 100 615 V7.0.0 (2000-02) 218 (GSM 12.04 version 7.0.0 Release 1998) History Document history V7.0.0 February 2000 Publication
|
6ce15bf95a1b22a297ad4f2826214f21
|
100 594
|
1 Scope
|
The use and general aspects of the A-bis interface are given in Technical Specification GSM 08.51. The present document defines the structure of the physical layer (layer 1) of the BSC - BTS/TRX interface for supporting traffic channels and control channels. Use of the physical layer for supporting link protocol is covered in Technical Specification GSM 08.56. The physical layer is the lowest layer in the OSI Reference Model and it supports all functions required for transmission of bit streams on the physical medium. For the present document only digital transmission will be considered, the use of analogue transmission is a national concern.
|
6ce15bf95a1b22a297ad4f2826214f21
|
100 594
|
2 References
|
The following documents contain provisions which, through reference in this text, constitute provisions of the present document. • References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. • For a specific reference, subsequent revisions do not apply. • For a non-specific reference, the latest version applies. • A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the same number. • For this Release 1998 document, references to GSM documents are for Release 1998 versions (version 7.x.y). [1] GSM 01.04: "European digital cellular telecommunications system (Phase 2+); Abbreviations and acronyms". [2] GSM 08.20: "European digital cellular telecommunications system (Phase 2+); Rate adaption on the Base Station System - Mobile-services Switching Centre (BSS - MSC) interface". [3] GSM 08.51: "European digital cellular telecommunications system (Phase 2+); Base Station Controller - Base Transceiver Station (BSC - BTS) interface General aspects". [4] GSM 08.56: "European digital cellular telecommunications system (Phase 2+); Base Station Controller - Base Transceiver Station (BSC - BTS) interface Layer 2 specification". [5] GSM 08.60 (ETS 300 597): "European digital cellular telecommunications system (Phase 2+); Inband control of remote transcoders and rate adaptors". [6] GSM 08.61: "European digital cellular telecommunications system (Phase 2+); Inband control of remote transcoders and rate adaptors (half rate)". [7] CCITT Recommendation G.703: "Physical/electrical characteristics of hierarchical digital interfaces". [8] CCITT Recommendation G.705: "Characteristics required to terminate digital links on a digital exchange". [9] CCITT Recommendation G.711: "Pulse code modulation (PCM) of voice frequencies". [10] CCITT Recommendation G.732: "Characteristics of primary PCM multiplex equipment operating at 2048 kbit/s". [11] CCITT Recommendation I.460: "Multiplexing, rate adaption and support of existing interfaces". ETSI ETSI TS 100 594 V7.0.0 (1999-08) 6 (GSM 08.54 version 7.0.0 Release 1998)
|
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.