hash
stringlengths 32
32
| doc_id
stringlengths 5
12
| section
stringlengths 4
595
| content
stringlengths 0
6.67M
|
|---|---|---|---|
62d647ebf6fb27c62e31dabd4f0b53c9
|
07.08
|
11 Handle PIN code;
| |
62d647ebf6fb27c62e31dabd4f0b53c9
|
07.08
|
12 Get available PLMNs;
| |
62d647ebf6fb27c62e31dabd4f0b53c9
|
07.08
|
13 Set PLMN mode;
|
14 ‑ 255 reserved for basic GSM functions.
The facility message parameter for these basic functions are described in the following subclauses.
|
62d647ebf6fb27c62e31dabd4f0b53c9
|
07.08
|
256 Restrict SS information;
| |
62d647ebf6fb27c62e31dabd4f0b53c9
|
07.08
|
257 Mobile originated SS transaction;
| |
62d647ebf6fb27c62e31dabd4f0b53c9
|
07.08
|
258 Clear Mobile originated SS transaction;
| |
62d647ebf6fb27c62e31dabd4f0b53c9
|
07.08
|
259 Receive SS message;
| |
62d647ebf6fb27c62e31dabd4f0b53c9
|
07.08
|
260 Call Hold;
| |
62d647ebf6fb27c62e31dabd4f0b53c9
|
07.08
|
261 Call Retrieve;
| |
62d647ebf6fb27c62e31dabd4f0b53c9
|
07.08
|
262 Call Ussd;
| |
62d647ebf6fb27c62e31dabd4f0b53c9
|
07.08
|
263 Receive Call related Facility;
|
264 ‑ 511 reserved for GSM Supplementary Services functions;
|
62d647ebf6fb27c62e31dabd4f0b53c9
|
07.08
|
512 Get Service State;
| |
62d647ebf6fb27c62e31dabd4f0b53c9
|
07.08
|
513 Get RX Level and RX Quality;
| |
62d647ebf6fb27c62e31dabd4f0b53c9
|
07.08
|
514 Get SIM Presence Info;
|
515 ‑ ... reserved.
|
62d647ebf6fb27c62e31dabd4f0b53c9
|
07.08
|
0 SIM is not present
| |
62d647ebf6fb27c62e31dabd4f0b53c9
|
07.08
|
1 SIM is present and accessible
|
Facility Response Parameter:
Facility selector
word
256: GSM Support
Function
word
54
Annex A (informative): GSM Supplementary Services Message flow
A.1 Restrict SS information
This Message Flow chart describes the flow for restriction of SS information.
Application MS Network
| facility_req(funct = 256) | |
| ------------------------------------------------------------->| |
| | |
| facility_conf(funct = 256) | |
| <-------------------------------------------------------------| |
| | |
| |
| SS Transaction may be started |
| |
| |
| facility_req(funct = 256) | |
| ------------------------------------------------------------->| |
| | |
| facility_cnf(funct = 256) | |
| <------------------------------------------------------------ | |
| | |
A.2 Mobile Originated SS transaction
This Message Flow chart describes the flow of GSM‑API and GSM layer 3 messages according to the GSM 04.80 [9] series as used for CF, CB etc.
Application MS Network
| facility_req(funct = 257) | register |
| ------------------------------------------------------------->| ------------------------------------------------------------> |
| | |
| facility_cnf(funct = 257) | |
| <------------------------------------------------------------ | |
| | |
| facility_ind(funct = 257) | release_compl. /facility |
| <------------------------------------------------------------ | <------------------------------------------------------------ |
| | |
| facility_resp(funct = 257) | |
| ------------------------------------------------------------->| |
A.3 Receive SS Message (Forward Check Indication)
This Message Flow Chart describes the spontaneous incoming SS message for Forward Check. The applications response is local.
Application MS Network
| | register |
| |<-------------------------------------------------------------|
| | |
| | release_compl. |
| |------------------------------------------------------------->|
| | |
| facility_ind(funct = 259) | |
| <------------------------------------------------------------ | |
| | |
| facility_resp(funct = 259) | |
| ------------------------------------------------------------->| |
A.4 Mobile originated USSD
This Message Flow Chart describes the Message Flow for mobile originated USSD according to GSM 04.90 [10].
Application MS Network
| facility_req(funct = 257) | register |
| ------------------------------------------------------------->| ------------------------------------------------------------> |
| | |
| facility_cnf(funct = 257) | |
| <------------------------------------------------------------ | |
Network requests further information (optional)
| facility_ind(funct = 259) | facility |
| <------------------------------------------------------------ | <------------------------------------------------------------ |
| | |
| facility_resp(funct = 259) | facility |
|-------------------------------------------------------------->|-------------------------------------------------------------->|
End of transaction
| facility_ind(funct = 257) | release_compl. /facility |
| <------------------------------------------------------------ | <------------------------------------------------------------ |
| | |
| facility_resp(funct = 257) | |
| ------------------------------------------------------------->| |
A.5 Mobile terminated USSD
This Message Flow Chart describes the message flow for mobile terminated USSD according to GSM 04.90 [10].
Application MS Network
| facility_ind (funct = 259) | register |
| <-------------------------------------------------------------| <--------------------------------------------------|
| | |
| facility_rsp(funct = 259) | |
| ------------------------------------------------------------> | --------------------------------------------------> |
Multiple Network request or notification (optional)
| facility_ind(funct = 259) | facility |
| <------------------------------------------------------------ | <--------------------------------------------------|
| | |
| facility_resp(funct = 259) | facility |
| ------------------------------------------------------------->| -------------------------------------------------->|
End of transaction
| | release_compl |
| | <--------------------------------------------------|
A.6 Call related USSD
Application MS Network
| facility_req (funct = 262) | cc_facility |
| ------------------------------------------------------------->| -------------------------------------------------->|
| | |
| facility_conf(funct = 262) | |
| ------------------------------------------------------------->| |
A.7 Call hold
This Message Flow chart describes the flow for call hold. The flow for call retrieve is equivalent.
Application MS Network
Call (identified by PLCI) is active
| facility_req(funct = 260, PLCI) | hold (TI) |
| ------------------------------------------------------------->| -------------------------------------------------->|
| | |
| facility_cnf(funct = 260, PLCI) | |
| <------------------------------------------------------------ | |
| | |
|facility_ind(funct = 264, Reason = 0 or cause) | hold ack. or hold rej. |
| <------------------------------------------------------------ | <--------------------------------------------------|
| | |
| facility_resp(funct = 260) | |
| ------------------------------------------------------------->| |
A.8 Receiving a Call related Facility
Application MS Network
| facility_ind (funct = 263) | cc_facility (except. charging info) |
| <-------------------------------------------------------------| <--------------------------------------------------|
| | |
| facility_resp (funct = 263) | |
| ------------------------------------------------------------->| |
Annex B (informative): Change history
SMG#
SPEC
PHASE
CR
VERS
NEW_VERS
SUBJECT
S20
07.08
2+
NEW
2.0.0
5.0.0
GSM API
s21
07.08
2+
A001
5.0.0
5.1.0
GSM API RP-Ack PDU
s24
07.08
R96
A002
5.1.0
5.2.0
Correction of references
History
Document history
December 1996
Public Enquiry PE 119: 1996‑12‑02 to 1997‑03‑28
February 1998
Vote V 9817: 1998-02-24 to 1998-04-24
May 1998
First Edition
|
050dd1f8ccaa6938e4dea97b2c4f9a36
|
09.14
|
1 Scope
|
The present document specifies the third version of the Integrated Services Digital Network (ISDN) - Global System for Mobile communications (GSM) Public Land Mobile Network (PLMN) signalling interface. The present document is applicable to the interconnection of PLMN and ISDN.
The ISUP interface defined is the trunk signalling interface between the PLMN and the ISDN. It is assumed that the interface between PLMN and ISDN can occur at any point in a national network, provided that the exchange in the national network has this ISDN-PLMN signalling interface.
This signalling interface is based on ISUP version 3 (as given in EN 300 356-1 [1] to EN 300 356-20 [19]). The functionality in the GSM system is based on GSM Phase 2+ Release 1998.
NOTE 1: Support of new functionality in the GSM system applicable for this interface may be included in subsequent versions of the present document or may be published as a new EN.
Connection types:
The following ISUP version 3 connection types can be supported:
- speech;
- 3,1 kHz audio;
- 64 kbit/s unrestricted;
- 64 kbit/s unrestricted preferred;
- 2 64 kbit/s unrestricted;
- 384 kbit/s unrestricted;
- 1 536 kbit/s unrestricted;
- 1 920 kbit/s unrestricted.
NOTE 2: 2 64 kbit/s, 384 kbit/s, 1 536 kbit/s, 1 920 kbit/s unrestricted and 64 kbit/s unrestricted preferred connection types are not supported by the GSM access, however the connection types may be used in order to support other access methods via the GSM network.
Supplementary services:
The following ISUP version 3 supplementary services can be supported:
- Calling Line Identification Presentation (CLIP)/
Calling Line Identification Restriction (CLIR);
- Connected Line Identification Presentation (COLP)/
Connected Line Identification Restriction (COLR);
- Terminal portability (TP);
- User-to-User Signalling (UUS);
- Closed User Group (CUG);
- Subaddressing (SUB);
- Malicious Call Identification (MCID);
- Conference call, add-on (CONF);
- Explicit Call Transfer (ECT);
- Call Forwarding Unconditional (CFU)/
Call Forwarding on Busy (CFB)/
Call Forwarding on No Reply (CFNR);
- Call Deflection (CD);
- Call Hold (HOLD);
- Call Waiting (CW);
- Completion of Calls to Busy Subscriber (CCBS);
- Completion of Calls on No Reply (CCNR);
- Three party (3PTY).
The support of supplementary services on this interface does not necessarily imply that the supplementary services are supported in one or the other of the networks interconnected.
The Direct Dialling In (DDI) supplementary service and Multiple Subscriber Number (MSN) supplementary service have no impact on this interface.
This interface can be used within national networks, however messages and parameters that are marked for national use in EN 300 356-1 [1] are not described in the present document.
|
050dd1f8ccaa6938e4dea97b2c4f9a36
|
09.14
|
2 References
|
The following documents contain provisions which, through reference in this text, constitute provisions of the present document.
• References are either specific (identified by date of publication, edition number, version number, etc.) or non‑specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.
• A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the same number.
• For this Release 1998 document, references to GSM documents are for Release 1998 versions (version 7.x.y).
[1] EN 300 356-1 (V3.2): "Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN User Part (ISUP) version 3 for the international interface; Part 1: Basic services [ITU‑T Recommendations Q.761 to Q.764 (1997), modified]".
[2] EN 300 356-2 (V3.2): "Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN User Part (ISUP) version 3 for the international interface; Part 2: ISDN supplementary services [ITU‑T Recommendation Q.730 (1997), modified]".
[3] EN 300 356-3 (V3.1): "Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN User Part (ISUP) version 3 for the international interface; Part 3: Calling Line Identification Presentation (CLIP) supplementary service [ITU‑T Recommendation Q.731, clause 3 (1993), modified]".
[4] EN 300 356-4 (V3.1): "Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN User Part (ISUP) version 3 for the international interface; Part 4: Calling Line Identification Restriction (CLIR) supplementary service [ITU‑T Recommendation Q.731, clause 4 (1993), modified]".
[5] EN 300 356-5 (V3.1): "Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN User Part (ISUP) version 3 for the international interface; Part 5: Connected Line Identification Presentation (COLP) supplementary service [ITU‑T Recommendation Q.731, clause 5 (1993), modified]".
[6] EN 300 356-6 (V3.1): "Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN User Part (ISUP) version 3 for the international interface; Part 6: Connected Line Identification Restriction (COLR) supplementary service [ITU‑T Recommendation Q.731, clause 6 (1993), modified]".
[7] EN 300 356-7 (V3.1): "Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN User Part (ISUP) version 3 for the international interface; Part 7: Terminal Portability (TP) supplementary service [ITU‑T Recommendation Q.733, clause 4 (1993), modified]".
[8] EN 300 356-8 (V3.1): "Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN User Part (ISUP) version 3 for the international interface; Part 8: User-to-User Signalling (UUS) supplementary service [ITU‑T Recommendation Q.737, clause 1 (1997), modified]".
[9] EN 300 356-9 (V3.1): "Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN User Part (ISUP) version 3 for the international interface; Part 9: Closed User Group (CUG) supplementary service [ITU‑T Recommendation Q.735, clause 1 (1993), modified]".
[10] EN 300 356-10 (V3.1): "Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN User Part (ISUP) version 3 for the international interface; Part 10: Subaddressing (SUB) supplementary service [ITU-T Recommendation Q.731, clause 8 (1992), modified]".
[11] EN 300 356-11 (V3.1): "Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN User Part (ISUP) version 3 for the international interface; Part 11: Malicious Call Identification (MCID) supplementary service [ITU‑T Recommendation Q.731, clause 7 (1997), modified]".
[12] EN 300 356-12 (V3.1): "Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN User Part (ISUP) version 3 for the international interface; Part 12: Conference call, add-on (CONF) supplementary service [ITU‑T Recommendation Q.734, clause 1 (1993), modified]".
[13] EN 300 356-14 (V3.1): "Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN User Part (ISUP) version 3 for the international interface; Part 14: Explicit Call Transfer (ECT) supplementary service [ITU-T Recommendation Q.732, clause 7 (1996), modified]".
[14] EN 300 356-15 (V3.2): "Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN User Part (ISUP) version 3 for the international interface; Part 15: Diversion supplementary services [ITU-T Recommendation Q.732, clauses 2 to 5 (1997), modified]".
[15] EN 300 356-16 (V3.1): "Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN User Part (ISUP) version 3 for the international interface; Part 16: Call Hold (HOLD) supplementary service [ITU‑T Recommendation Q.733, clause 2 (1993), modified]".
[16] EN 300 356-17 (V3.1): "Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN User Part (ISUP) version 3 for the international interface; Part 17: Call Waiting (CW) supplementary service [ITU-T Recommendation Q.733, clause 1 (1992), modified]".
[17] EN 300 356-18 (V3.1): "Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN User Part (ISUP) version 3 for the international interface; Part 18: Completion of Calls to Busy Subscriber (CCBS) supplementary service [ITU-T Recommendation Q.733, clause 3 (1997), modified]".
[18] EN 300 356-19 (V3.1): "Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN User Part (ISUP) version 3 for the international interface; Part 19: Three-Party (3PTY) supplementary service [ITU-T Recommendation Q.734, clause 2 (1996), modified]".
[19] EN 300 356-20 (V3.1): "Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN User Part (ISUP) version 3 for the international interface; Part 20: Completion of Calls on No Reply (CCNR) supplementary service".
[20] ITU‑T Recommendation Q.763 (1993): "Signalling System No. 7; ISDN user part formats and codes".
[21] GSM 03.50: "Digital cellular telecommunications system (Phase 2); Transmission planning aspects of the speech service in the GSM Public Land Mobile Network (PLMN) system".
[22] GSM 03.81: "Digital cellular telecommunications system (Phase 2); Line identification supplementary services; Stage 2".
[23] GSM 03.84: "Digital cellular telecommunications system (Phase 2+); MultiParty (MPTY) supplementary services; Stage 2".
[24] GSM 03.86: "Digital cellular telecommunications system (Phase 2+); Advice of Charge (AoC) supplementary services; Stage 2".
[25] GSM 03.88: "Digital cellular telecommunications system (Phase 2+); Call Barring (CB) supplementary services; Stage 2".
[26] GSM 03.90: "Digital cellular telecommunications system (Phase 2+); Unstructured Supplementary Service Data (USSD) - Stage 2".
[27] GSM 03.93: "Digital cellular telecommunications system (Phase 2+); Technical realization of Completion of Calls to Busy Subscriber (CCBS); Stage 2".
[28] GSM 09.04: "Digital cellular telecommunications system (Phase 2+); Interworking between the Public Land Mobile Network (PLMN) and the Circuit Switched Public Data Network (CSPDN)".
[29] GSM 09.07: "Digital cellular telecommunications system (Phase 2+); General requirements on interworking between the Public Land Mobile Network (PLMN) and the Integrated Services Digital Network (ISDN) or Public Switched Telephone Network (PSTN)".
[30] GSM 09.02: "Digital cellular telecommunications system (Phase 2+); Mobile Application Part (MAP) specification".
[31] ETS 300 008: "Integrated Services Digital Network (ISDN); Signalling System No.7; Message Transfer Part (MTP) to support international interconnection".
[32] ITU-T Recommendation E.164 (1997): "The international public telecommunication numbering plan".
[33] GSM 03.96: "Digital cellular telecommunications system (Phase 2+); Name identification supplementary services; Stage 2".
[34] GSM 02.97: "Digital cellular telecommunications system (Phase 2+); Multiple Subscriber Profile (MSP) Phase 1; Service description, Stage 1".
|
050dd1f8ccaa6938e4dea97b2c4f9a36
|
09.14
|
3 Abbreviations
|
For the purposes of the present document, the following abbreviations apply:
3PTY Three-Party
ACM Address Complete Message
AoC Advice of Charge
CB Call Barring
CCBS Completion of Calls to Busy Subscriber
CCNR Completion of Calls on No Reply
CD Call Deflection
CFB Call Forwarding Busy
CFNR Call Forwarding No Reply
CFNRc Call Forwarding on Mobile Subscriber Not Reachable
CFU Call Forwarding Unconditional
CLIP Calling Line Identification Presentation
CLIR Calling Line Identification Restriction
COLP Connected Line Identification Presentation
COLR Connected Line Identification Restriction
CONF Conference calling
CPG Call Progress message
CUG Closed User Group
CW Call Waiting
DDI Direct Dialling In
ECT Explicit Call Transfer
GMSC Gateway MSC
GSM Global System for Mobile communications
HLC High Layer Compatibility
HLR Home Location Register
HOLD Call Hold
HPLMN Home Public Land Mobile Network
IAM Initial Address Message
ISDN Integrated Services Digital Network
ISUP ISDN User Part
MAP Mobile Application Part
MCID Malicious Call Identification
MPTY MultiParty
MS Mobile Station
MSC Mobile-service Switching Centre
MSISDN Mobile Station ISDN number
MSN Multiple Subscriber Number
MSRN Mobile Station Roaming Number
MTP Message Transfer Part
NI Network Indicator
PLMN Public Land Mobile Network
SUB Subaddressing
TP Terminal Portability
USSD Unstructured Supplementary Service Data
UUS User-to-User Signalling
VLR Visitor Location Register
VMSC Visited MSC
|
050dd1f8ccaa6938e4dea97b2c4f9a36
|
09.14
|
4 General principles
|
The gateway exchanges in both networks behave like international incoming or outgoing gateways in the relevant cases as described in EN 300 356-1 [1] to EN 300 356-20 [19], with the exceptions indicated within the present document.
|
050dd1f8ccaa6938e4dea97b2c4f9a36
|
09.14
|
5 Exceptions and clarifications for basic call
| |
050dd1f8ccaa6938e4dea97b2c4f9a36
|
09.14
|
5.1 Formats and codes
|
The formats and codes specified in EN 300 356‑1 [1] with the exceptions and clarifications described in the table in annex D shall be applicable.
|
050dd1f8ccaa6938e4dea97b2c4f9a36
|
09.14
|
5.2 Basic call signalling procedures
|
The basic call procedures of EN 300 356-1 [1] apply with the following exceptions and clarifications.
|
050dd1f8ccaa6938e4dea97b2c4f9a36
|
09.14
|
5.2.1 Signalling procedures for connection type allowing fallback
|
The gateway in the preceding network (PLMN or ISDN) shall perform fallback according to the procedures defined in EN 300 356-1 [1] when the succeeding network does not support fallback.
|
050dd1f8ccaa6938e4dea97b2c4f9a36
|
09.14
|
5.2.2 Echo control procedure
|
The enhanced echo control procedure according to EN 300 356-1 [1] is not supported. Instead the simple echo control procedure described in EN 300 356-1 [1] is applicable.
According to GSM 03.50 [21], for speech and 3,1 kHz audio connection types an acoustic echo control shall be provided in the MS. The PLMN may provide electric echo control.
Echo control procedures are not applicable to 64 kbit/s, 2 64 kbit/s, 384 kbit/s, 1 536 kbit/s or 1 920 kbit/s unrestricted connection types.
Examples of echo control procedures are shown in annex E.
|
050dd1f8ccaa6938e4dea97b2c4f9a36
|
09.14
|
5.2.3 Calls from the PLMN to the fixed network
| |
050dd1f8ccaa6938e4dea97b2c4f9a36
|
09.14
|
5.2.3.1 Gateway in the PLMN
|
The Initial Address Message (IAM) sent by the gateway in the PLMN shall be coded taking into account the following exceptions and clarifications.
|
050dd1f8ccaa6938e4dea97b2c4f9a36
|
09.14
|
5.2.3.1.1 Initial address message
|
Called party number
The called party number parameter may contain a Mobile Station Roaming Number (MSRN).
- Internal network number indicator:
0 if the MSRN is included;
1 otherwise.
The use of the internal network number indicator is an option.
User service information
The IAM shall always include a user service information parameter for calls to the fixed network when the ISDN access indicator is set to ISDN.
|
050dd1f8ccaa6938e4dea97b2c4f9a36
|
09.14
|
5.2.4 Calls from the fixed network to the PLMN
| |
050dd1f8ccaa6938e4dea97b2c4f9a36
|
09.14
|
5.2.4.1 Gateway in the fixed network
| |
050dd1f8ccaa6938e4dea97b2c4f9a36
|
09.14
|
5.2.4.1.1 Initial address message
|
Called party number
The called party number parameter contains the MSISDN or MSRN:
- Internal network number indicator:
0 if MSRN is included;
1 if MSISDN is included.
NOTE: The value of the internal network number indicator is set in the exchange having the relevant knowledge, and is passed transparently through the fixed network. Due to interworking with old signalling systems, an MSRN may be received with the internal network number indicator set to "0" or "1".
The use of the internal network number indicator is an option.
|
050dd1f8ccaa6938e4dea97b2c4f9a36
|
09.14
|
5.2.4.2 Gateway in the PLMN
| |
050dd1f8ccaa6938e4dea97b2c4f9a36
|
09.14
|
5.2.4.2.1 Address complete message
|
Significant delays may be incurred while interrogating location registers and while paging the terminating MS.
Due to the possible delays involved in setting up mobile calls, the PLMN needs to take special action to ensure that timer T7 (awaiting address complete timer) does not expire.
For this reason, whenever a call enters the PLMN, the PLMN shall run a timer, the PLMN/ISDN early Address Complete Message (ACM) timer (value 5 to 20 seconds). The timer is to be started after receiving the complete number. If the timer expires, an address complete message is sent. The PLMN shall stop the timer on sending a first backward message (address complete message or connect message).
The ACM shall contain the backward call indicators set to "0" except for:
Backward call indicators
- Charge indicator:
00 (no indication);
01 (no charge); or
10 (charge).
NOTE: The setting of the charge indicator is network specific.
- ISDN access indicator:
1 (ISDN) (preferred value, see table D.1).
- Echo control device indicator:
set according to echo control procedure described in annex E.
- ISDN user part indicator:
1 (ISDN user part used all the way).
Once the PLMN gateway has sent backwards one ACM message for a call (either because it has internally generated the ACM message or because it has transited an ACM message received from another node) it shall not send further ACM messages. Information in a subsequent ACM received in the PLMN gateway shall be mapped to a call progress message. The Event indicator in the CPG message is set according to the mapping rules defined in EN 300 356‑15 [14].
|
050dd1f8ccaa6938e4dea97b2c4f9a36
|
09.14
|
6 Exceptions and clarifications for supplementary services
|
Supplementary services are used according to EN 300 356‑1 [1] to EN 300 356‑20 [19]. When considering supplementary services, there exists a symmetry about this interface although the ISDN services may not be the same as the PLMN services. For each service supported by EN 300 356‑2 [2] to EN 300 356‑20 [19] or GSM 03.81 [22] to GSM 03.90 [26] and GSM 03.93 [27], the operation of the service in each direction needs to be considered. Supplementary services supported by the interface but not by one of the connected networks shall be handled according to EN 300 356‑1 [1] to EN 300 356‑20 [19], i.e. the gateway concerned acts like an international gateway.
Exceptions and clarifications for the coding are described in table D.1, unless otherwise stated.
|
050dd1f8ccaa6938e4dea97b2c4f9a36
|
09.14
|
6.1 Considerations on ISDN supplementary services
| |
050dd1f8ccaa6938e4dea97b2c4f9a36
|
09.14
|
6.1.1 Handling of number parameters related to supplementary services
|
The following text applies when referenced for the appropriate parameters.
Number parameters related to supplementary services sent across the ISDN-PLMN interface shall have the following coding of the nature of address indicator.
National significant number (000 0011) shall be used in the following cases:
- for a number allocated to a fixed access when the fixed access, the sending gateway and the receiving gateway are in the same country;
- for a number allocated to an MS registered in its HPLMN when the MS, the sending gateway and the receiving gateway are in the same country.
International number (000 0100) shall be used for all other cases.
If the gateway has to modify a parameter to satisfy the above requirement, it shall modify the nature of address indicator and modify the number in accordance with the new nature of address.
|
050dd1f8ccaa6938e4dea97b2c4f9a36
|
09.14
|
6.1.1.1 Calling Line Identification Presentation/Restriction (CLIP/CLIR) supplementary services
|
EN 300 356‑3 [3] and EN 300 356‑4 [4] apply with the exceptions below:
Calling party number and generic number
Handling of calling party number and the appropriate generic number shall be made according to subclause 6.1.1.
For mobile originated calls the calling line identity is mapped into the calling party number parameter.
If the Generic Number parameter with a number qualifier set to "additional calling party number" is received in a PLMN then the calling party number parameter shall be discarded by the mobile access.
The PLMN shall not check for consistency in the screening indicators of the calling party number and the additional calling party number.
Actions at the Mobile gateway exchange when supporting transfer of calling party number and generic number parameters via MAP interfaces
The support of transfer of calling party number and generic number parameters via MAP interfaces shall have no impact on the actions to be performed at the mobile gateway exchange (GMSC) for the transfer of information relating to the CLIP and CLIR supplementary services on the ISUP interface.
The following actions shall be performed at the GMSC for the mapping of calling party number and generic number parameters to the MAP C interface:
The GMSC shall transfer neither the calling party number nor the generic number parameter to the MAP interface if the presentation indicator of the received calling party number parameter is set to "address not available".
The GMSC shall convert the calling party number conveyed in the calling party number parameter to an international number (if necessary) and set the nature of address indicator to "international number". The address presentation restricted indicator and the screening indicator shall be transferred transparently.
If the generic number parameter is received and its number qualifier indicates "additional calling party number" and the numbering plan indicator is coded "ISDN (Telephony) numbering plan (ITU-T Recommendation E.164 [32])", then the generic number parameter shall be treated in the same manner as the calling party number parameter.
The generic number parameter shall not be mapped if its number qualifier indicates "additional calling party number" and the screening indicator is coded "user provided, verified and failed".
The address presentation restricted indicator of the generic number parameter shall be set to the same value as the address presentation restricted indicator of the calling party number parameter ("presentation restricted" or "presentation allowed").
|
050dd1f8ccaa6938e4dea97b2c4f9a36
|
09.14
|
6.1.1.2 Connected Line Identification Presentation/Restriction (COLP/COLR) supplementary services
|
EN 300 356‑5 [5] and EN 300 356‑6 [6] apply with the exceptions below:
Connected number and generic number
Handling of connected number and the appropriate generic number shall be made according to subclause 6.1.1. For mobile terminated calls the connected line identity is to be mapped into the connected number parameter. If the generic number parameter with a number qualifier set to "additional connected number" is received in a PLMN then the connected number parameter shall be discarded by the mobile access. The PLMN shall not check for consistency in the screening indicators of the connected number and the additional connected number.
|
050dd1f8ccaa6938e4dea97b2c4f9a36
|
09.14
|
6.1.1.3 Terminal Portability (TP) supplementary service
|
EN 300 356‑7 [7] applies.
NOTE: Terminal Portability is supported by the protocol, however the service is not provided for the GSM access.
|
050dd1f8ccaa6938e4dea97b2c4f9a36
|
09.14
|
6.1.1.4 User-to-User Signalling (UUS) supplementary service
|
EN 300 356‑8 [8] applies.
NOTE: The maximum length of the user-user parameter of the setup message at the GSM access is restricted to 35 octets. When a GSM PLMN receives a longer user-to-user information element in the IAM message the User-to-user information element will be discarded without indication.
|
050dd1f8ccaa6938e4dea97b2c4f9a36
|
09.14
|
6.1.1.5 Closed User Group (CUG) supplementary service
|
EN 300 356‑9 [9] applies.
|
050dd1f8ccaa6938e4dea97b2c4f9a36
|
09.14
|
6.1.1.6 Subaddressing (SUB) supplementary service
|
EN 300 356‑10 [10] applies.
|
050dd1f8ccaa6938e4dea97b2c4f9a36
|
09.14
|
6.1.1.7 Malicious Call Identification (MCID) supplementary service
|
EN 300 356‑11 [11] applies with the exceptions below:
Calling party number and generic number
Handling of calling party number and the appropriate generic number shall be made according to subclause 6.1.1.
NOTE: Malicious Call Identification is supported by the protocol, however the service is not provided for the GSM access.
|
050dd1f8ccaa6938e4dea97b2c4f9a36
|
09.14
|
6.1.1.8 Conference call, add-on (CONF) supplementary service
|
EN 300 356‑12 [12] applies with the exception below:
Notification messages may be sent from the ISDN to the PLMN according to GSM 03.84 [23].
NOTE: Conference call is supported by the protocol, however the service is not provided for the GSM access. The corresponding service in GSM is the multiparty service defined by the GSM standards.
|
050dd1f8ccaa6938e4dea97b2c4f9a36
|
09.14
|
6.1.1.9 Explicit Call Transfer (ECT) supplementary service
|
EN 300 356‑14 [13] applies with the exceptions below:
Call Transfer Number
Handling of call transfer number shall be made according to subclause 6.1.1.
|
050dd1f8ccaa6938e4dea97b2c4f9a36
|
09.14
|
6.1.1.10 Diversion supplementary services (Call Forwarding Unconditional (CFU)/Call Forwarding on Busy (CFB)/Call Forwarding on No Reply (CFNR)/Call Deflection (CD))
|
EN 300 356‑15 [14] applies with the exceptions below:
Original called number, redirecting number and redirection number
Handling of original called number, redirecting number and redirection number shall be made according to subclause 6.1.1.
|
050dd1f8ccaa6938e4dea97b2c4f9a36
|
09.14
|
6.1.1.11 Call Hold (HOLD) supplementary service
|
EN 300 356‑16 [15] applies.
|
050dd1f8ccaa6938e4dea97b2c4f9a36
|
09.14
|
6.1.1.12 Call Waiting (CW) supplementary service
|
EN 300 356‑17 [16] applies.
|
050dd1f8ccaa6938e4dea97b2c4f9a36
|
09.14
|
6.1.1.13 Completion of Calls to Busy Subscriber (CCBS) supplementary service
|
EN 300 356‑18 [17] applies with the exception below:
If the GMSC has the knowledge that the CCBS service is not supported the diagnostics in the Release message will be set to indicate "CCBS not possible" (for cause values 17 or 34).
|
050dd1f8ccaa6938e4dea97b2c4f9a36
|
09.14
|
6.1.1.14 Completion of Calls on No Reply (CCNR) supplementary service
|
EN 300 356‑20 [19] applies with the exception below:
NOTE: Completion of Calls on No Reply is supported by the protocol, however the service is not provided for the GSM access.
|
050dd1f8ccaa6938e4dea97b2c4f9a36
|
09.14
|
6.1.1.15 Three party (3PTY) supplementary service
|
EN 300 356‑19 [18] applies with the exceptions below:
Notification messages may be sent from the ISDN to the PLMN according to GSM 03.84 [23].
NOTE: Three party is supported by the protocol, however the service is not provided for the GSM access. The 3PTY service can be a part of the multiparty service as defined by the GSM standards.
|
050dd1f8ccaa6938e4dea97b2c4f9a36
|
09.14
|
6.2 Considerations on GSM unique supplementary services
| |
050dd1f8ccaa6938e4dea97b2c4f9a36
|
09.14
|
6.2.1 Call Forwarding on Mobile Subscriber Not Reachable (CFNRc) supplementary service
|
EN 300 356‑15 [14] applies with the exceptions below:
Original Called Number, Redirecting Number and Redirection Number
Handling of original called number, redirecting number and redirection number shall be made according to subclause 6.1.1. For calls that have been redirected (because of mobile subscriber not reachable) via the GSM-system, the Redirecting Reason shall be set to Mobile Subscriber Not Reachable.
|
050dd1f8ccaa6938e4dea97b2c4f9a36
|
09.14
|
6.2.2 Advice of Charge (AoC) supplementary service
|
No impact on the ISDN-PLMN- interface. The service is described in GSM 03.86 [24].
|
050dd1f8ccaa6938e4dea97b2c4f9a36
|
09.14
|
6.2.3 Call Barring (CB) supplementary service
|
No impact on the ISDN-PLMN interface. The service is described in GSM 03.88 [25].
|
050dd1f8ccaa6938e4dea97b2c4f9a36
|
09.14
|
6.2.4 Unstructured Supplementary Service Data (USSD)
|
No impact on the ISDN-PLMN interface. The service is described in GSM 03.90 [26].
|
050dd1f8ccaa6938e4dea97b2c4f9a36
|
09.14
|
6.2.5 Calling Name Presentation supplementary service (CNAP)
|
No impact on the ISDN-PLMN interface. The service is described in GSM 03.96 [33].
|
050dd1f8ccaa6938e4dea97b2c4f9a36
|
09.14
|
6.2.6 Multiple Subscriber Profile (MSP) supplementary service
|
No impact on the ISDN-PLMN interface. The service is described in GSM 02.97 [34].
|
050dd1f8ccaa6938e4dea97b2c4f9a36
|
09.14
|
6.2.7 Multi Party (MPTY) supplementary service
|
The service is described in ETS 300 545 [26].
Notification messages of the MPTY supplementary service may be mapped on the ISDN-PLMN interface into notification messages of the ISDN Conference call (CONF) supplementary service defined in EN 300 356-12 [12].
|
050dd1f8ccaa6938e4dea97b2c4f9a36
|
09.14
|
7 Message Transfer Part (MTP) protocol requirements
|
The Message Transfer Part (MTP) protocol shall conform to the requirements in ETS 300 008 [31] with the appropriate value for the Network Indicator (NI).
It is preferred that NI value 10 (national network) is used within GSM networks as in the fixed national network. Based on national agreement, any NI value may be applied on the interface between GSM networks and the fixed networks.
Annex A (informative):
Considerations on teleservices
A.1 Relation between ISDN teleservices and GSM teleservices
Teleservices may be identified on the ISDN-PLMN interface in the User Teleservice Information parameter. High Layer Compatibility (HLC) information elements are passed transparently in the access transport parameter. Support of teleservices is an end-to-end aspect. However, the relationships between some ISDN teleservices and GSM teleservices are listed for information.
Table A.1: Relationship between ISDN teleservices and GSM teleservices
ISDN teleservices
GSM teleservices
Telephony
Telephony, Emergency call
Facsimile Group 2/3
Automatic facsimile group 3
Facsimile Group 4 Class 1
Not used
Teletex
Not used
Not used
Alternate speech and facsimile group 3
Not used
SMS, Point-To-Point, Mobile Originated
Not used
SMS, Point-To-Point, Mobile Terminated
Not used
SMS Cell Broadcast
Videotex
Not used
Telex
Not used
Message Handler System
Not used
Videotelephony
Not used
Videoconferencing
Not used
Annex B (informative):
Considerations on bearer services
The mapping between parameters in the GSM call set up request message and the ISDN call set up request message is described in GSM 09.04 [28] to GSM 09.07 [29].
Annex C (informative):
Mapping of parameters between ISUP and MAP
Mapping of parameters between ISUP and MAP will take place for Mobile terminating calls where the MSC (acting as gateway MSC) has to interrogate the home location register in order to obtain routeing information (the HLR needs to retrieve the routeing information from the VLR). The interface between MSC and VLR is an internal interface, mapping of parameters on this interface are not described in this specification.
C.1 Mapping of parameters from IAM to MAP_SEND_ROUTING_INFORMATION req.
Table C.1: Mapping of parameters from IAM to MAP_SEND_ROUTING_INFORMATION req
IAM
MAP_SEND_ROUTING_INFORMATION req.
Called Party Number
MSISDN
Closed user group interlock code
CUG Interlock
Optional forward call indicators
- Closed user group indicator
CUG Outgoing Access
Redirection information
- Redirection counter
Number of Forwarding
Access Transport/User Service Information
Network signal information
NOTE: Mapping of Network signal information is described in GSM 09.02 [30].
C.2 Mapping of parameters from MAP_SEND_ROUTING_INFORMATION rsp. to IAM
Table C.2: Mapping of parameters from MAP_SEND_ROUTING_INFORMATION rsp. to IAM
MAP_SEND_ROUTING_INFORMATION rsp.
IAM
CUG Interlock
Closed user group interlock code
CUG Outgoing Access
Optional forward call indicators
- Closed user group indicator
MSRN (note 1)
Called Party Number
(if no call forwarding is performed)
Forwarding Data (note 2)
- ForwardedToNumber
- ForwardedToSubaddress
- ForwardingOptions
notification to forwarding party
forwarding reason
Called Party Number
Access Transport
- Called Party Subaddress
Redirection information
NOTE 1: This parameter will not be present if the parameter Forwarding Data is returned.
NOTE 2: This parameter will not be present if the MSRN is returned.
Annex D (informative):
Formats and codes
D.1 Unrecognized messages and parameters
The receipt of unrecognized messages and parameters are handled using standard message and parameter compatibility rules defined in EN 300 356-1 [1].
D.2 Exceptions and clarifications to clause 3 of ITU‑T Recommendation Q.763 as modified by EN 300 356-1
Table D.1: Exceptions and clarifications to clause 3 of ITU‑T Recommendation Q.763 [20]
as modified by EN 300 356‑1 [1]
Q.763 [20]
clause
Title
Remarks
3.5
Backward call indicators
Bit M: terminating PLMN subscribers to be considered as ISDN terminations (this is the preferred situation, but other coding may be agreed between the PLMN and ISDN operators).
3.12
Cause indicator
For the coding of the location field, the exchanges at the interface between the mobile and fixed ISDN networks need not to be considered as an international interface.
The appropriate support of cause 20 within the originating network (e.g. provision of an announcement) is a matter of the network provider.
3.23
Forward call indicators
Bit A: the ISDN-PLMN interface can be an interface within the national network, and then the national/international indicator to be passed on transparently on this interface. It is assumed that the national/international indicator is set to:
1 = "call to be treated as an international call"
for incoming international calls in an international gateway exchange in the fixed or mobile network, and that otherwise it is coded:
0 = "call to be treated as a national call".
Bit I: originating PLMN subscribers to be considered as ISDN terminations (this is the preferred situation, but other codings may be agreed between the PLMN and ISDN operators).
3.45
Redirection information
The redirection counter is incremented when the call is forwarded, however the mechanism for the allocation of a Mobile Station Roaming Number (MSRN) is not to be considered as an instance of call forwarding.
Annex E (informative):
Examples of echo control procedures
E.1 Outgoing call in a Mobile-service Switching Centre (MSC)
If the requested bearer is "speech" or "3,1 kHz", the echo control device indicator is set to "1" (outgoing included) in the IAM sent by the MSC.
An incoming half echo control device is "reserved" on the outgoing circuit of the MSC.
If the backward call indicators parameter received in the ACM indicates that an incoming half echo control device is included, the "reserved" incoming half echo control device of the outgoing circuit of the MSC is disabled.
If the backward call indicators parameter received in the ACM indicates that an incoming half echo control device is not included, the "reserved" incoming half echo control device of the outgoing circuit of the MSC is enabled.
If the requested bearer is "64 kbit/s unrestricted", the echo control device indicator is set to "0" (outgoing not included). No echo devices are reserved.
E.2 Incoming call in the MSC
1) If the nature of the connection indicators parameter indicates that an outgoing half echo control device is included, any outgoing half echo control device on the incoming circuit of the MSC is disabled.
- If the MSC is a Visited Mobile-service Switching Centre (VMSC), the backward call indicators parameter sent in the ACM indicates that an incoming half echo control device is enabled.
- If the MSC is a Gateway Mobile-service Switching Centre (GMSC) or in case of call forwarding, the incoming half echo control device of the outgoing circuit is "reserved" and the echo control device indicator sent in the IAM is passed on:
- if the backward call indicators parameter received in the ACM indicates that an incoming half echo control device is included the incoming half echo control device of the outgoing circuit of the MSC is disabled;
- if the backward call indicators parameter received in the ACM indicates that an incoming half echo control device is not included the incoming half echo control device of the MSC is enabled. The backward call indicators in ACM are changed accordingly.
2) If the nature of the connection indicators parameter indicates that an outgoing half echo control device is not included, the outgoing half echo control device on the incoming circuit of the MSC is reserved.
- If the MSC is a VMSC, the outgoing half echo control device is enabled and the backward call indicators parameter sent in the ACM indicates that an incoming half echo control device is included.
- If the MSC is a GMSC or if the call is to be forwarded and the MSC knows that an outgoing half echo control device is necessary (e.g. called MS, forwarding to an international destination):
- the outgoing half echo control device on the incoming circuit is enabled and the echo control parameter sent in the IAM indicates "outgoing half echo control device included";
- the incoming half echo control device of the outgoing circuit is "reserved";
- if the backward call indicators parameter received in the ACM indicates that an incoming half echo control device is included the incoming half echo control device of the outgoing circuit of the MSC is disabled. The backward call indicators in ACM are passed on unchanged;
- if the backward call indicators parameter received in the ACM indicates that an incoming half echo control device is not included the incoming half echo control device of the MSC is enabled. The backward call indicators in ACM are changed accordingly.
- If the MSC is a GMSC or if the call is to be forwarded and the MSC knows that an outgoing half echo control device is not necessary:
- the outgoing half echo control device on the incoming circuit is disabled and the echo control parameter in the IAM is passed on;
- the incoming half echo control device on the outgoing circuit is disabled.
E.3 Examples of echo control procedure
The following additional notations are used in figures E.1 to E.13:
G Gateway in the fixed network
(o.i) outgoing half echo control device included
(o.ni) outgoing half echo control device not included
(i.i) incoming half echo control device included
(i.ni) incoming half echo control device not included
(*) echo control device "reserved"
* echo control device enabled
x echo control device disabled
i incoming half echo control device
o outgoing half echo control device
E.3.1 Call from a mobile station to a mobile station via the fixed network
Figure E.1
E.3.2 Call from a mobile station to fixed network with no echo control device
Figure E.2
E.3.3 Call from a mobile station to fixed network with echo control device
Figure E.3
E.3.4 Call from fixed network with no echo control device to a mobile station roaming in a PLMN of another country
Figure E.4
E.3.5 Call from fixed network with echo control device to a mobile station roaming in a PLMN of another country
Figure E.5
E.3.6 Call from fixed network with no echo control device to a mobile station
Figure E.6
E.3.7 Call from fixed network with echo control device to a mobile station
Figure E.7
E.3.8 Call forwarded by the VMSC
Figure E.8
E.3.9 Call forwarded by the VMSC to the fixed network with no echo control device
Figure E.9
E.3.10 Call with no outgoing echo control device included in a preceding exchange forwarded by the VMSC to the fixed network with no echo control device in the terminating network. The VMSC knows that an outgoing half echo control device is not necessary
Figure E.10
E.3.11 Call with no outgoing echo control device included in a preceding exchange forwarded by the VMSC to the fixed network with echo control device in the terminating network. The VMSC knows that an outgoing half echo control device is not necessary
Figure E.11
E.3.12 Call with no outgoing echo control device included in a preceding exchange forwarded by the VMSC to the fixed network with no echo control device in the terminating network. The VMSC knows that an outgoing half echo control device is necessary
Figure E.12
E.3.13 Call with no outgoing echo control device included in a preceding exchange forwarded by the VMSC to the fixed network with echo control device in the terminating network. The VMSC knows that an outgoing half echo control device is necessary
Figure E.13
Bibliography
The following material, though not specifically referenced in the body of the present document (or not publicly available), gives supporting information.
- ETS 300 121 (1992): "Integrated Services Digital Network (ISDN); Application of the ISDN User Part (ISUP) of CCITT Signalling System No.7 for international ISDN interconnections (ISUP version 1)".
- GSM 03.82: "Digital cellular telecommunications system (Phase 2+); Call Forwarding (CF) supplementary services; Stage 2".
- GSM 03.83: "Digital cellular telecommunications system (Phase 2+); Call Waiting (CW) and Call Hold (HOLD) supplementary services; Stage 2".
- GSM 03.85: "Digital cellular telecommunications system (Phase 2+); Closed User Group (CUG) supplementary services; Stage 2".
- GSM 09.05: "Digital cellular telecommunications system (Phase 2+); Interworking between the Public Land Mobile Network (PLMN) and the Packet Switched Public Data Network (PSPDN) for Packet Assembly/Disassembly (PAD) facility access".
- GSM 09.06: "Digital cellular telecommunications system (Phase 2+); Interworking between a Public Land Mobile Network (PLMN) and a Packet Switched Public Data Network/Integrated Services Digital Network (PSPDN/ISDN) for the support of packet switched data transmission services".
History
Document history
V7.0.2
September 1999
Public Enquiry PE 9957: 1999-09-01 to 1999-12-31
V7.1.0
April 2000
|
fa1f7147965681eaaaf31c7cb7fe148b
|
10.57
|
1 Scope
|
The purpose of this document is to describe the project plan for the Mobile Station Execution Environment (MEXE) work item standardisation.
This document is a ‘living document’ and permanently updated by PT SMG. Proposals for change shall be forwarded to PT SMG, where the latest version can be obtained any time. The MEXE specification rapporteurs should make sure that this document can always reflects the latest status of work.
|
fa1f7147965681eaaaf31c7cb7fe148b
|
10.57
|
1.1 References
| |
fa1f7147965681eaaaf31c7cb7fe148b
|
10.57
|
1.2 Abbreviations
|
MNCRS WG4 Mobile Network Computer Reference Standard Working Group 4
|
fa1f7147965681eaaaf31c7cb7fe148b
|
10.57
|
2 General Considerations for MEXE
| |
fa1f7147965681eaaaf31c7cb7fe148b
|
10.57
|
2.1 Support tools for specification work
|
ETSI FTP Server (docboc.etsi.fr or docbox.etsi.org):
SMG4 /../SMG/SMG4/WI_mexe .
Email distribution list: [email protected] (Subscription for contributors from SMG1, SMG4, SMG9 and SMG10, instructions on how to subscribe in Tdoc SMG4 97p488)
|
fa1f7147965681eaaaf31c7cb7fe148b
|
10.57
|
2.2 Decisions at SMG
|
Workitem Rapporteur
John Candish (NORTEL); email: [email protected]
|
fa1f7147965681eaaaf31c7cb7fe148b
|
10.57
|
2.2.1 SMG#22
|
SMG#22 agreed to establish a small project team that elaborated a workitem description backed by a feasibility study on mobile station application execution environment.
|
fa1f7147965681eaaaf31c7cb7fe148b
|
10.57
|
2.2.2 SMG#23
|
SMG#23 agreed the workitem description and the feasibility study conditionally. The condition is that the relationship between the SMG work and the WAP consortium can be clarified before WAP is taken into account.
|
fa1f7147965681eaaaf31c7cb7fe148b
|
10.57
|
2.2.3 SMG#24 (bis)
|
SMG4 is mandated to communicate directly to MNCRS and WAP, provided that the WAP consortium is open for new members. A LS had been sent to WAP from SMG#24bis, although some concerns were expressed afterwards.
|
fa1f7147965681eaaaf31c7cb7fe148b
|
10.57
|
2.2.4 SMG#25
|
It was noted that preceding SMG's had agreed co-operation with WAP under condition of open participation rights for interested parties.
SMG#25 asked SMG4 to organise a technical review meeting of the WAP papers. which was convened as a MExE Workshop on 27-28 April in Sophia Antipolis hosted by ETSI.
|
fa1f7147965681eaaaf31c7cb7fe148b
|
10.57
|
3 Co-operation with other groups
| |
fa1f7147965681eaaaf31c7cb7fe148b
|
10.57
|
3.1 Co-operation with MNCRS-WG4:
|
Close working contact with MNCRS-WG4 should be established. Initially SMG4 shall contact MNCRS-WG4 informing them of SMG’s proposed MEXE activities. SMG4 proposes that the work with MNCRS-WG4 is organised as follows:
SMG4 works with MNCRS-WG4 to produce an ETSI technical report on the additions required to Java to fully enable Java with GSM capabilities. It is envisaged that MNCRS-WG4 would then complete the necessary additions to Java standards. The technical report shall be actively maintained, in order that the Java standards can be kept up-to-date with new developments in GSM/UMTS.
Chairman of MNCRS-WG4: John Dykstra, Nortel ([email protected], phone: +1-612-9328749)
Liaison officer to MNCRS: Jyrki Yli-Nokari, Nokia ([email protected], phone: +358 400 834437)
Point of Contact in SMG4: Sverre Slotte, Nokia ([email protected], phone: +358 9 4376 6208)
|
fa1f7147965681eaaaf31c7cb7fe148b
|
10.57
|
3.2 Co-operation with JavaSoft:
|
JavaSoft, as the body with overall responsibility for Java, should be kept informed of SMG’s work with MNCRS-WG4. It is expected that the MNCRS group would forward the GSM specific additions on JAVA to JavaSoft for endorsement..
|
fa1f7147965681eaaaf31c7cb7fe148b
|
10.57
|
3.3 Co-operation with other Java bodies:
|
As the need arises.
|
fa1f7147965681eaaaf31c7cb7fe148b
|
10.57
|
3.4 Co-operation with the WAP Consortium:
|
It is evident that a relationship with the WAP Consortium needs to be established as soon as possible in order to co-ordinate MEXE work and to avoid discontinuities between the two.
A LS has been sent from SMG#23, SMG#24, SMG#24bis and SMG#25.
There is a liaison officer named to SMG: Jonas Branden, [email protected]
|
fa1f7147965681eaaaf31c7cb7fe148b
|
10.57
|
4 Deliverables on MExE
| |
fa1f7147965681eaaaf31c7cb7fe148b
|
10.57
|
4.1 MExE service definition (stage 1), GSM 02.57
|
Responsible Body: SMG1
Draft GSM 02.57
Rapporteur
Mark Cataldo, Lucent
approved at SMG#25
Scope of this document is the high level requirements for the MExE work item. The stage1 document will be restricted to cover the high level requirement but not imply an architecture or a realisation. The major input to the stage 1 is the requirements in the feasibility study. Though the requirements are independent of any technology, the SMG work will focus on the two complementary technologies identified in the feasibility study, i.e. WAP and JAVA. At the same time it is recognised that some work, e.g. on WAP is carried out outside SMG.
The requirements will be presented from the perspective of the user, network operator and the third part service provider. (The third party SP is understood as being a body that is not a GSM network operator but still offering services to subscribers with a MExE terminal)
High level charging requirements will be covered in the stage 1. Responsible for detailed elaboration future after stage 1 approval would be MoU SERG, CAGE2+ and SMG6.
High level Security requirements will be covered in the stage 1. Responsible for detailed elaboration future after stage 1 approval would be SMG10.
|
fa1f7147965681eaaaf31c7cb7fe148b
|
10.57
|
4.2 GSM enhanced Java environment
|
Responsible Body: SMG4
Draft GSM 03.57
Contact person
Mr. John Candish
to be presented for information at SMG#27
to be approved at SMG#28
Scope of the deliverable will be:
1. Identify the necessary additions to the JAVA APIs to fully support GSM capabilities.
2. Propose the GSM reference profiles (e.g. personal, embedded JAVA and JAVA card) and the capabilities to be added as minimum capability set..
3. Propose a reference architecture of a mexe capable terminal, considering any possiible relationships with WAP architecture, JAVA environment in the terminal, JAVA Card within the SIM card the SIM Toolkit, possible and possible GSM bearers.
4. Describe the additional functions in sufficient detail.
|
fa1f7147965681eaaaf31c7cb7fe148b
|
10.57
|
4.3 New specification: Support of multiple MExE technologies in GSM/UMTS
|
Responsible Body: SMG4
07.57
Contact person
Mr. John Candish
presented for information at SMG#27
approved at SMG#28
Scope of the deliverable:
Identify and propose a solution for the issues raised by the support of multiple mexe technologies in GSM/UMTS. In particular this means the specification of a common and evolvable protocol for terminal capability negotiation. The protocol itself will have to incorporate a version handling mechanism. Software download is envisaged as a negotiable capability of the protocol.
The need for this specification will be assessed and determined during the course of the year.
|
fa1f7147965681eaaaf31c7cb7fe148b
|
10.57
|
5 Project Plan for MExE
| |
fa1f7147965681eaaaf31c7cb7fe148b
|
10.57
|
5.1 Scope of SMG meetings on MExE
|
Date
Meeting
Scope
[expected] Input
[expected]Output
E mail distribution of proposed stage 1
Joint SMG1, SMG4, SMG9 Ad hoc on requirements
Feasibility study, Requirements from other areas On the MOVE, etc.
Stage 1 first draft
12-16 Jan 1998
SMG1 (Sophia Antipolis) + joint SMG1 & 4 adhoc
Review stage 1, mandate MExE group for finalization
Stage 1 draft from workshop
Stage 1
Send output for information to SMG6 and MoU CAGE2+, SMG10.
28-30 Jan 1998
mexe-adhoc
(Nokia/Helsinki)
Ad hoc on architecture
and transport mechanisms
WAP standard (if available)
JAVA API standards
First draft TR .
9-13 Feb 1998
SMG4
Review output of mexe adhoc group.
Review reply from MNCRS
dto.
Second draft.
25-27 Feb 1998
mexe stage 1 SMG1/4 adhoc (if required)
Finalise stage 1
Draft stage 1 from SMG 1
Finalised Stage 1
16-20/03/98
SMG#25
Approval of MEXE stage1
Stage 1
Stage 1 description
27-29 April 1998
MExE Workshop
Review of WAP documentation against SMG requirements
MExE Stage 1, WAP specifications
LS to SMG and WAP Forum
…..
15/05/98
SMG4
Stage 2
Initial MExE Stage 2
Draft MExE Stage 2
22-26/06/98
SMG#26
Status of MExE work item
LS from MExE Workshop
Decision on co-operation with WAP
???
Decision on whether 07.57 required?
12-16/10/98
SMG#27
MEXE stage2
provided for information
Produce API specification, reference models, Profile of API
Output to JavaSoft, LS to SMG4 to check output.
Javasoft endorses the JAVA language extensions. (WAP extensions?)
28/9-02/10/98
SMG4
Progress on MExE Stage 2 and Java(/WAP?) Requirements
30/11-04/12/98
SMG4
Check final output of MNCRS, approve MExE Stage 2.
MExE Stage 3 decision.
Final output from MNCRS, MExE Stage 2.
Formal endorsement of JAVA GSM extensions
08-12/02/99
SMG#28
Approval of MExE Stage 2
MExE Stage 2
Formal endorsement of JAVA GSM extensions.
|
fa1f7147965681eaaaf31c7cb7fe148b
|
10.57
|
5.2 Major Milestones for MExE (to be derived by PT SMG)
|
Planned Date
Milestone
Status
1
26/11/97
Kick-off MExE at SMG4
2
20/03/98
SMG#25: Approval of GSM 02.57 MExE stage 1
3
26/06/98
4
12-16/10/98
SMG#27: GSM 03.57 MExE stage 2 presented for information
5
08-12/02/99
SMG#28: Approval of GSN 03.57 MExE Stage 2
|
fa1f7147965681eaaaf31c7cb7fe148b
|
10.57
|
5.3 Overview on meetings with relevance for MExE
|
ANNEX B Lists of Outstanding Issues and technical decisions for MExE
B.1 List of outstanding issues and action points for MExE
Item
Status
Subject
[Solution] | [/ Due party/ due date]
9711-1
open
Type approval testing/ voluntary tests for MExE conforming terminals
9711-5
open
Clarify how the final output standard would fit into the ISO model
9801-1
closed
02.57: Provide input to 02.57 with regard to JAVA Card on the SIM with SIM Toolkit
SMG9 delegates, see 02.57 version 1.0.0
9801-2
closed
02.57: Elaborate on different level of trusted applications
, see 02.57 version 1.0.0
9801-3
closed
02.57: Review Requirements for Mobile Middleware and APIs in UMTS
all/next meeting, see 02.57 version 1.0.0
9801-4
closed
02.57: Elaborate on language and characterset considerations
, see 02.57 version 1.0.0
9801-5
closed
02.57: Elaborate requirements for subscriptions
, see 02.57 version 1.0.0
B.2 List of major decisions for MExE
9802-1
see 02.57 version 1.0.0
History
Document history
Note: Explicit changes in this document are not shown with revision marks
26/06/98
v 3.0.0
19/01/2000
V7.0.0 approved SMG#26
Rapporteur: Mark Cataldo, ETSI / PT12 (SMG).
Email: [email protected] Ph:+33.4.92 94 4349 Fax:+33.4.93 65 28 17
|
f762b14e5c522e02d691e67ffda2480a
|
11.10-3
|
1 Scope
|
The present document specifies the Abstract Test Suites (ATS) and partial IXIT proforma for the Network Layer (Layer 3) at the mobile radio interface of the GSM or DCS (Phase 2+) mobile stations (MS) conforming to the ENs for Layer 3, cell selection, Enhanced Full Rate Speech, Multi-band, GSM-R band (R-GSM) and ASCI ( the voice group call service (VGCS), voice broadcast service (VBS), enhanced Multi-Level Precedence and Pre-emption service (eMLPP), User-to-user Signalling (UUS) service and the Follow Me service) for the digital cellular telecommunications systems.
This EN is valid for MS implemented according Phase2 or Phase2+ R96, or R97, or R98, or R99, or R00.
The ISO standards for the methodology of conformance testing and the TTCN language are used as the basis for the test specifications.
|
f762b14e5c522e02d691e67ffda2480a
|
11.10-3
|
2 References
|
The following documents contain provisions which, through reference in this text, constitute provisions of the present document.
• References are either specific (identified by date of publication, edition number, version number, etc.) or non‑specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.
• A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the same number.
• For a Phase2+ Release 2000 MS, references to GSM documents are to version 9.x.y, when available.
• For a Phase2+ Release 1999 MS, references to GSM documents are to version 8.x.y, when available.
• For a Phase2+ Release 1998 MS, references to GSM documents are to version 7.x.y, when available.
• For a Phase2+ Release 1997 MS, references to GSM documents are to version 6.x.y, when available.
• For a Phase2+ Release 1996 MS, references to GSM documents are to version 5.x.y,. when available.
• For a Phase2 MS, references to GSM documents are to version 4.x.y.
[1] ISO/IEC 9646‑1: "Information Technology-OSI- Conformance Testing Methodology and Framework, Part 1: General Concepts".
[2] ISO/IEC 9646‑2: "Information Technology-OSI- Conformance Testing Methodology and Framework, Part 2: Abstract Test Suite Specification".
[3] ISO/IEC 9646‑3: "Information Technology-OSI- Conformance Testing Methodology and Framework, Part 3: The Tree and Tabular Combined Notation".
[4] ISO/IEC 9646‑5: "Information Technology-OSI- Conformance Testing Methodology and Framework, Part 5: Requirements on test laboratories and clients for the conformance assessment process".
[5] ISO/IEC 8824: "Information Technology-OSI- Specification of Abstract Syntax Notation One (ASN.1)".
[6] ISO/IEC 8825: "Information Technology-OSI- Specification of Basic Encoding Rules for Abstract Syntax Notation One (ASN.1)".
[7] ITU‑T Recommendation Q.773: "Specifications of Signalling System No.7; Transaction capabilities formats and encoding".
[8] ETS 300 287: "Integrated Services Digital Network (ISDN); Signalling System No.7, Transaction Capabilities Application Part (TCAP) version 2".
[9] ETS 300 406 (January 1995): "Methods for Testing and Specification (MTS); Protocol and profile conformance testing specifications; Standardization methodology".
[10] GSM 02.02: "Digital cellular telecommunication system (see Note 1); Bearer Services (BS) supported by a GSM Public Land Mobile Network (PLMN)".
[10a] 3G TS 22.002: “Circuit Bearer Services (BS) supported by a Public Land Mobile Network (PLMN) (see Note 2) ”
[11] GSM 02.03: "Digital cellular telecommunication system (see Note 1); Teleservices supported by a GSM Public Land Mobile Network (PLMN)".
[11a] 3G TS 22.003: “Circuit Teleservices supported by a Public Land Mobile Network (PLMN) (see Note 2)”
[12] GSM 02.06: "Digital cellular telecommunication system (see Note 1); Types of Mobile Stations (MS)".
[13] GSM 02.07: "Digital cellular telecommunication system (see Note 1); Mobile Station (MS) features".
[14] GSM 02.30: "Digital cellular telecommunication system (see Note 1); Man-Machine Interface (MMI) of the Mobile Station (MS)".
[14a] 3G TS 22.030: “Man-Machine Interface (MMI) of the User Equipment (UE) (see Note 2)”
[15] GSM 02.67: "Digital cellular telecommunications system (Phase 2+); enhanced Multi-Level Precedence and Pre-emption service (eMLPP) – stage 1"
[15a] 3G TS 22.067:”Enhanced Multi‑Level Precedence and Pre‑emption service (eMLPP) ‑ Stage 1 (see Note 2)”
[16] GSM 02.68: "Digital cellular telecommunications system (Phase 2+); Voice Group Call Service – stage 1"
[17] GSM 02.69: "Digital cellular telecommunications system (Phase 2+); Voice Broadcast Service – stage 1"
[18] GSM 03.03: "Digital cellular telecommunication system (see Note 1); Numbering, addressing and identification".
[18a] 3G TS 23.003: “Numbering, Addressing and Identification (see Note 2)”
[19] GSM 03.09: "Digital cellular telecommunications system (see Note 1); Handover procedures".
[19a] 3G TS 23.009: “Handover procedures (see Note 2)”
[20] GSM 03.10: "Digital cellular telecommunications system (see Note 1); GSM Public Land Mobile Network (PLMN) connection types".
[21] GSM 03.11: "Digital cellular telecommunication system (see Note 1); Technical realization of supplementary services".
[21a] 3G TS 23.011 “Technical Realization of Supplementary Services – General aspects (see Note 2)”
[22] GSM 03.12: "Digital cellular telecommunications system (see Note 1); Location registration procedures".
[22a] 3G TS 23.012 “Location management procedures (see Note 2)”
[23] GSM 03.14: "Digital cellular telecommunications system (see Note 1); Support of Dual Tone Multi-Frequency signalling (DTMF) via the GSM system".
[23a] 3G TS 23.014: “Support of Dual Tone Multi Frequency (DTMF) signalling (see Note 2)”
[24] GSM 03.22: "Digital cellular telecommunication system (see Note 1); Functions related to Mobile Station (MS) in idle mode".
[25] GSM 03.40: "Digital cellular telecommunication system (see Note 1); Technical realization of the Short Message Service (SMS) Point to Point (PP)".
[25a] 3G TS 23.040: “Technical realization of Short Message Service (see Note 2)”
[26] GSM 03.41: "Digital cellular telecommunication system (see Note 1); Technical realization of Short Message Service Cell Broadcast (SMSCB)".
[26a] 3G TS 23.041: “Technical realization of Cell Broadcast service (see Note 2)”
[27] GSM 03.67: "Digital cellular telecommunications system (Phase 2+); enhanced Multi-Level Precedence and Pre-emption service (eMLPP) – stage 2"
[27a] 3G TS 23.067: “Enhanced Multi-level precedence and Pre-emption service (e|MLPP) – Stage 2 (see Note 2)”
[28] GSM 03.68: "Digital cellular telecommunications system (Phase 2+); Voice Group Call Service – stage 2"
[29] GSM 03.69: "Digital cellular telecommunications system (Phase 2+); Voice Broadcast Service – stage 2"
[30] GSM 04.01: "Digital cellular telecommunications system (see Note 1); Mobile Station - Base Station System (MS - BSS) interface General aspects and principles".
[31] GSM 04.03: "Digital cellular telecommunications system (see Note 1); Mobile Station - Base Station System (MS - BSS) interface Channel structures and access capabilities".
[32] GSM 04.04: "Digital cellular telecommunication system (see Note 1); layer 1 General requirements".
[33] GSM 04.05: "Digital cellular telecommunication system (see Note 1); Data Link (DL) layer General aspects".
[34] GSM 04.06: "Digital cellular telecommunication system (see Note 1); Mobile Station - Base Station System (MS - BSS) interface Data Link (DL) layer specification".
[35] GSM 04.07: "Digital cellular telecommunication system (see Note 1); Mobile radio interface signalling layer 3 General aspects".
[35a] 3G TS 24.007: “Mobile Radio Interface Signalling Layer 3 – general Aspects (see Note 2)”
[36] GSM 04.08: "Digital cellular telecommunication system (see Note 1); Mobile radio interface layer 3 specification".
[36a] 3G TS 24.008: “Mobile radion interface Layer 3 specification; Core network Protocols – Stage 3 (see Note 2)”
[37] GSM 04.10: "Digital cellular telecommunication system (see Note 1); Mobile radio interface layer 3 Supplementary services specification General aspects".
[37a] 3G TS 24.010: “Mobile radio Interface Layer 3 – Supplementary Services Specification – General Aspects (see Note 2)”
[38] GSM 04.11: "Digital cellular telecommunication system (see Note 1); Point-to-Point (PP) Short Message Service (SMS) support on mobile radio interface".
[38a] 3G TS 24.011: “Point-to-Point (PP) Short Message Service (SMS) Support on Mobile Radio Interface (see Note 2)”
[39] GSM 04.12: "Digital cellular telecommunication system (see Note 1); Short Message Service Cell Broadcast (SMSCB) support on the mobile radio interface".
[39a] 3G TS 24.012: “Short Message Service Cell Broadcast (SMSCB) Support on the Mobile Radio interface (see Note 2)”
[40] GSM 04.67: "Digital cellular telecommunications system (Phase 2+); enhanced Multi-Level Precedence and Pre-emption service (eMLPP) Stage 3"
[40a] 3G TS 24.067: “Enhanced Multi-level Precedence and Pre-emption service (eMLPP) – stage 3 (see Note 2)”
[41] GSM 04.68: "Digital cellular telecommunications system (Phase 2+); Group Call Control (GCC) protocol
[42] GSM 04.69: "Digital cellular telecommunications system (Phase 2+); Broadcast Call Control (BCC) protocol
[43] GSM 04.80: "Digital cellular telecommunication system (see Note 1); Mobile radio interface layer 3 supplementary services specification; Formats and coding".
[43a] 3G TS 24.080: “Mobile Radio Layer 3 Supplementary Service specification – Formats and coding (see Note 2)”
[44] GSM 04.81: "Digital cellular telecommunication system (see Note 1); Line identification supplementary services - Stage 3".
[44a] 3G TS 24.081: “Line identification Supplementary Service – Stage 3 (see Note 2)”
[45] GSM 04.82: "Digital cellular telecommunication system (see Note 1); Call Forwarding (CF) supplementary services - Stage 3".
[45a] 3G TS 24.082: “Call Forwrding Supplementary Service – Stage 3 (see Note 2)”
[46] GSM 04.83: "Digital cellular telecommunication system (see Note 1); Call Waiting (CW) and Call Hold (HOLD) supplementary services - Stage 3".
[46a] 3G TS 24.083: “Call Waiting (CW) and Call Hold (HOLD) Supplementary Service – Stage 3 (see Note 2)”
[47] GSM 04.84: "Digital cellular telecommunication system (see Note 1); MultiParty (MPTY) supplementary services - Stage 3".
[47a] 3G TS 24.084: “Multiparty (MPTY) Supplementary Service – stage 3 (see Note 2)”
[48] GSM 04.85: "Digital cellular telecommunications system (see Note 1); Closed User Group (CUG) supplementary services - Stage 3".
[48a] 3G TS 24.085: “Closed User Group (CUG) Supplementary Service – Stage 3 (see Note 2)”
[49] GSM 04.86: "Digital cellular telecommunication system (see Note 1); Advice of Charge (AoC) supplementary services - Stage 3".
[49a] 3G TS 24.086: “Advice of Charge (AoC) Supplementary Service – Stage 3 (see Note 2)”
[50] GSM 04.88: "Digital cellular telecommunication system (see Note 1); Call Barring (CB) supplementary services - Stage 3".
[50a] 3G TS 24.088: “Call Barring (CB) Supplementary Service – Stage 3 (see Note 2)”
[51] GSM 04.90: "Digital cellular telecommunication system (see Note 1); Unstructured supplementary services operation - Stage 3".
[51a] 3G TS 24.090: “Unstructured Supplementary Service Data (USSD) – Stage 3 (see Note 2)”
[52] GSM 05.01: "Digital cellular telecommunications system (see Note 1); Physical layer on the radio path General description".
[53] GSM 05.02: "Digital cellular telecommunication system (see Note 1); Multiplexing and multiple access on the radio path".
[54] GSM 05.03: "Digital cellular telecommunication system (see Note 1); Channel coding".
[55] GSM 05.04: "Digital cellular telecommunication system (see Note 1); Modulation".
[56] GSM 05.05: "Digital cellular telecommunication system (see Note 1); Radio transmission and reception".
[57] GSM 05.08: "Digital cellular telecommunication system (see Note 1); Radio subsystem link control".
[58] GSM 05.10: "Digital cellular telecommunication system (see Note 1); Radio subsystem synchronization".
[59] GSM 07.01: "Digital cellular telecommunication system (see Note 1); General on Terminal Adaptation Functions (TAF) for Mobile Stations (MS)".
[59a] 3G TS 27.001: “General on Terminal Adaptation Functions (TAF) for Mobile stations (MS) (see Note 2)”
[60] GSM 08.08: "Digital cellular telecommunications system (see Note 1); Mobile-services Switching Centre - Base Station System (MSC - BSS) interface Layer 3 specification".
[61] GSM 08.58: "Digital cellular telecommunications system (see Note 1); Base Station Controller - Base Transceiver Station (BSC - BTS) interface Layer 3 specification".
[62] GSM 09.02: "Digital cellular telecommunication system (see Note 1); Mobile Application Part (MAP) specification".
[62a] 3G TS 29.002: “Mobile Application Part (MAP) (see Note 2)”
[63] GSM 11.10‑1 Version 9.0.0 : "Digital cellular telecommunications system (); Mobile Station (MS) conformance specification; Part 1: Conformance specification".
[64] GSM 11.10-2: “Digital cellular telecommunications system (see Note 1); Mobile Station (MS) conformance specification; Part 2: Protocol Implementation Conformance Statement (PICS) Proforma specification”.
[65] GSM 11.11: "Digital cellular telecommunications system (see Note 1); Mobile Equipment (SIM ‑ ME) interface".
[66] 3G TS 22.087: "User-to-User Signalling (UUS); Service description, Stage 1 (see Note 2)".
[67] 3G TS 22.094: "Follow Me Service description; Stage 1 (see Note 2)".
[68] 3G TS 23.087: "User-to-User Signalling (UUS) Supplementary Service; Stage 2 (see Note 2)".
[69] 3G TS 23.094: "Follow-Me (FM) - Stage 2 (see Note 2)".
[70] 3G TS 24.087: “User-to-User Signalling (UUS) Supplementary Service; Stage 3 (see Note 2)”.
[71] GSM 04.18: “Radio Resource Control Protocol (see Note 1)”
Note 1: Read Phase 2 or Phase 2+ as necessary.
Note 2: Read Release 1999 or further as necessary
|
f762b14e5c522e02d691e67ffda2480a
|
11.10-3
|
3 Definitions and abbreviations
|
3.1 Definitions
For the purposes of the present document, the following terms and definitions apply:
Abstract Test Suite (ATS): refer to ISO/IEC 9646‑1 [1].
Implementation Under Test (IUT): refer to ISO/IEC 9646‑1 [1].
Partial Protocol Implementation eXtra Information for Testing (IXIT): refer to ISO/IEC 9646‑1 [1].
Point of Controls and Observations (PCO): refer to ISO/IEC 9646‑1 [1].
Protocol Implementation Conformance Statement (ICS): refer to ISO/IEC 9646‑1 [1].
System Under Test (SUT): refer to ISO/IEC 9646‑1 [1].
|
f762b14e5c522e02d691e67ffda2480a
|
11.10-3
|
3.2 Abbreviations
|
For the purposes of the present document, the following abbreviations apply:
ATS Abstract Test Suite
BI Invalid Behaviour tests
BO Inopportune Behaviour tests
BV Valid Behaviour tests
CA CApability tests
EDP-N Event Detection Point - Notification
EDP-R Event Detection Point - Request
EN European Telecommunication Standard
FE Functional Entity
FSM Finite State Machine
ICS Implementation Conformance Statement
IUT Implementation Under Test
IXIT Implementation eXtra Information for Testing
PDU Protocol Data Unit
SUT System Under Test
TP Test Purpose
TSS Test Suite Structure
|
f762b14e5c522e02d691e67ffda2480a
|
11.10-3
|
4 Test Suite Structure (TSS)
| |
f762b14e5c522e02d691e67ffda2480a
|
11.10-3
|
4.1 Test suite naming convention
|
The test group identifier for each group and subgroup is built according to the scheme in figure 1.
Identifier: L3<c><g>
<c> = category: RGSM R-GSM test suite
ASCI ASCI test suite
L3 Layer 3
EFR Enhanced Full Rate
DB Dual Band
CS Cell Selection
<g> = group: eMLPP eMLPP test group
VGCS_VBS VGCS/VBS test group
CellSelection cell selection and re-selection test group
Signalling signalling test group
UUS User-to-User signalling test group
FM Follow Me test group
General General cases
Initial Test Initial test
IdleMode Idle Mode
BiBo Invalid and Inopportune Behaviour test
RR Radio Ressource
MM Mobility Management
CC Call Control
StructureProc Structure procedure
EGSMSignalling EGSM Signalling
SS Supplementary Service
SMS Short Message Service
EFR Enhanced Full Rate
MultiBandMsRpt Multi Band MS Report
DualBand Dual Band
Figure 1: Test group identifier naming convention scheme
|
f762b14e5c522e02d691e67ffda2480a
|
11.10-3
|
4.2 Suite Overview
|
Figure 2 shows the structure of the test suites in the present document.
ATSs
L3
Phase 2
CS
Phase 2
EFR
Phase 2
DB
Phase 2
RGSM
R96
ASCI
R96
UUS & FM
R00
Figure 2: Test suite structure of the L3 tests
|
f762b14e5c522e02d691e67ffda2480a
|
11.10-3
|
4.3 Test groups
|
Each test group corresponds to a subclause in the GSM 11.10-1.
|
f762b14e5c522e02d691e67ffda2480a
|
11.10-3
|
4.4 Test Step Structure
| |
f762b14e5c522e02d691e67ffda2480a
|
11.10-3
|
4.4.1 Preambles
|
The preamble is defined for each test case.
|
f762b14e5c522e02d691e67ffda2480a
|
11.10-3
|
4.4.2 Postambles
|
After each test case the IUT shall be brought to the state as defined in the postamble for each test case.
|
f762b14e5c522e02d691e67ffda2480a
|
11.10-3
|
5 Test Purposes (TP)
|
For each conformance requirement a Test Purpose (TP) is defined. The test purposes are specified in the ATS Dynamic part (annex A and C).
|
f762b14e5c522e02d691e67ffda2480a
|
11.10-3
|
5.1 TP and test case naming convention
|
In order clearly to map the conformance requirements specified in the EN 300 607‑1 and TTCN test cases in the ATS, the clause numbers in the EN 300 607‑1 are used as test case names.
The identifier of each TP is identical to the name of the implemented TTCN test case.
"Test Purpose Identifier" = "Test Case Name" = TPI = TC_NN_A_B_C_D_E, where NN, A, B, C, D and E are digits used in the corresponding clause numbers of EN 300 607‑1. For example, the test case name TC_26_14_1_2 is the TTCN specification corresponding to the conformance requirements and the test case in the clause 26.14.1.2 in the EN 300 607‑1. TC_26_10_2_1R is the TTCN specification corresponding to the conformance requirements and the test case of the R-GSM part in the clause 26.10.2.1 in the EN 300 607‑1.
In case where the clause has been implemented in more than one test case sub numbering has been introduced..
|
f762b14e5c522e02d691e67ffda2480a
|
11.10-3
|
6 Abstract test method and test configurations
|
The distributed test method applies to the L3 MS testing. The test method uses a lower tester and a Man‑Machine Interface (MMI) as an upper tester at the SUT.
|
f762b14e5c522e02d691e67ffda2480a
|
11.10-3
|
6.1 Test system model
|
The model of the L3 test system is based on the original protocol architecture at the air interface. The test system consists conceptually of a lower tester LT, the L3 test programme (executable test suite), a L2 radio link emulator, a management functional unit, the L1 service provider and a TRx set (see figure 1).
Figure 3: Test system and distributed test method
The LT provides the test environment and for test execution and the means of control and observation at the L3 lower service boundary within the test system.
The L3 TTCN test specification uses the three LT interfaces to communicate with the MS, the system under test, and with the other parts of the test system:
- Interface to the L2 emulator via the PCO;
- Interface to the management functional unit via TTCN test suite operations;
- Interface to the MS Man-Machine Interface (MMI) via a test operator.
|
f762b14e5c522e02d691e67ffda2480a
|
11.10-3
|
6.2 Test Method
|
The PCO in the LT is defined as L2 SAP (SAP 0 + 3). The PCO has two FIFO queues (data buffers) to store all sending and receiving test events. The L2 primitives in the ATS which constitute mainly the interface to the L2 emulator are specified via the L2 primitives. In order to simulate multicell testing as required in some test cases, the defined primitives are able to address individual cells of the test system and the logic channels of each cell for the L3 message exchanges. The L2 emulator together with the underlying L1 and the TRx set support all message exchanges via correct radio links.
The management function unit has three management functions:
• L2 and L1 management;
• Channel management;
• TRx management;
The interface to the management function unit is presented in the ATS via a set of test suite operations. The major functions of the test suite management operations are:
• To load configuration parameters necessary for the test system.
• To control and get the necessary values of radio resources/ channels for tests.
The SUT (MS) has a more or less standardized MMI, such as keys, digital display, tones, etc. The ATS uses such kind of functions to provoke some procedures or to observe simple results at the SUT side. A human operator is needed during the test. The test system shall have an interface to the human operator to enable the test co-ordination.
Annex A (normative):
Partial IXIT proforma
Notwithstanding the provisions of the copyright clause related to the text of the present document, ETSI grants that users of the present document may freely reproduce the PIXIT proforma in this annex so that it can be used for its intended purposes and may further publish the completed PIXIT.
A.0 Introduction
This partial IXIT proforma contained in the present document, after augmented by the Test Realizer, is proposed to be provided to the client for completion, when the related Abstract Test Suite is to be used against client's Implementation Under Test (IUT).
Text in italics is comments for guidance for the production of a IXIT, and is not to be included in the actual IXIT.
The completed IXIT will normally be used in conjunction with the completed ICS, as it adds precision to the information provided by the ICS.
A.1 Identification Summary
This table is completed by the test laboratory. The item "Contract References" is optional.
Table 1: Identification Summary
IXIT Reference Number
Test Laboratory Name
Date of Issue
Issued to (name of client)
Contract References
A.2 Abstract Test Suite Summary
In the following table the test laboratory provides the version number of the protocol specification and the version number of ATS which are used in the conformance testing.
Table 2: ATS Summary
Protocol Specification
EN 300 557
Version of Protocol Specification
TSS & TP Specification
EN 300 607‑1
Version of TSS & TP Specification
ATS Specification
EN 300 607‑3
Version of ATS Specification
Abstract Test Method
Distributed Test Method
A.3 Test Laboratory
A.3.1 Test Laboratory Identification
The test laboratory provides the following information.
Table 3: Test Laboratory Identification
Name of Test Laboratory
Postal Address
Office address
e-mail address
Telephone Number
FAX Number
A.3.2 Accreditation status of the test service
The test laboratory provides the following information.
Table 4: Accreditation status of the test service
Accreditation status
Accreditation Reference
A.3.3 Manager of Test Laboratory
The test laboratory provides the information about the manager of test laboratory in the following table.
Table 5: Manager of Test Laboratory
Name of Manager of Test Laboratory
e-mail address
Telephone Number
FAX Number
E-mail Address
A.3.4 Contact person of Test Laboratory
The test laboratory provides the information about the contact person of test laboratory in the following table.
Table 6: Contact person of Test Laboratory
Name of Contact of Test Laboratory
e-mail address
Telephone Number
FAX Number
E-mail Address
A.3.5 Means of Testing
In the table below, the test laboratory provides a statement of conformance of the Means Of Testing (MOT) to the reference standardized ATS, and identifies all restrictions for the test execution required by the MOT beyond those stated in the reference standardized ATS.
Table 7: Means of Testing
Means of Testing
A.3.6 Instructions for Completion
In this table, the test laboratory provides any specific instructions necessary for completion and return of the proforma from the client.
Table 8: Instruction for Completion
Instructions for Completion
A.4 Client
A.4.1 Client Identification
The client provides the identification in the following table.
Table 9: Client Identification
Name of Client
Postal Address
Office Address
Telephone Number
FAX Number
A.4.2 Client Test Manager
In this table the client provides information about the test manager.
Table 10: Client Test Manager
Name of Client Test Manager
Telephone Number
FAX Number
E-mail Address
A.4.3 Client Contact person
In this table the client provides information about the test contact person.
Table 11: Client Contact person
Name of Client contact person
Telephone Number
FAX Number
E-mail Address
A.4.4 Test Facilities Required
In the following table, the client records the particular facilities required for testing, if a range of facilities is provided by the test laboratory.
Table 12: Test Facilities Required
Test Facilities Required
A.5 System Under Test
A.5.1 SUT Information
The client provides information about the SUT in the table below.
Table 13: SUT Information
System Name
System Version
SCS Reference
Machine Configuration
Operating System Identification
IUT Identification
ICS Reference for the IUT
A.5.2 Limitations of the SUT
In the table below, the client provides information explaining if any of the abstract tests cannot be executed.
Table 14: Limitation of the SUT
Limitations of the SUT
A.5.3 Environmental Conditions
In the table below the client provides information about any tighter environmental conditions for the correct operation of the SUT.
Table 15: Environmental Conditions
Environmental Conditions
A.6 Ancillary Protocols
This clause is completed by the client in conjunction with the test laboratory.
In the following tables, the client identifies relevant information concerning each ancillary protocol in the SUT other than the IUT itself. One table for one ancillary protocol.
Based on the MOT the test laboratory should create question proforma for each ancillary protocol in the blank space following each table. The information required is dependent on the MOT and the SUT, and covers all the addressing, parameter values, timer values and facilities (relevant to ENs) as defined by the ICS for the ancillary protocol.
A.6.1 Ancillary Protocols 1
Table 16: Ancillary Protocol 1
Protocol Name
EN 300
Version number
ICS Reference (optional)
IXIT Reference (optional)
PCTR Reference (optional)
A.6.2 Ancillary Protocols 2
Table 17: Ancillary Protocol 2
Protocol Name
EN 300
Version number
ICS Reference (optional)
IXIT Reference (optional)
PCTR Reference (optional)
A.7 Protocol Layer Information for L3 of Mobile Station
A.7.1 Information provided for test purposes by the MS supplier
Item
Description
Type/Allowed values
Supported Value
Release
TSPC_24DataF
2.4 k full rate data mode supported – must be TRUE if TSPC_24DataH = TRUE
BOOLEAN
Phase 2
TSPC_24DataH
2.4 k half rate data mode supported
BOOLEAN
Phase 2
TSPC_48DataF
4.8 k full rate data mode supported– must be TRUE if TSPC_48DataH = TRUE
BOOLEAN
Phase 2
TSPC_48DataH
4.8 k half rate data mode supported
BOOLEAN
Phase 2
TSPC_96Data
9.6 k full rate data mode supported
BOOLEAN
Phase 2
TSPC_Feat_A51
ciphering algorithm A5/1 supported
BOOLEAN
Phase 2
TSPC_Feat_A52
ciphering algorithm A5/2 supported
BOOLEAN
Phase 2
TSPC_AddCharSet
A, B, C, D chars supported
BOOLEAN
Phase 2
TSPC_AddInfo_PseudoSynch
Pseudo synchronized supported
BOOLEAN
Phase 2
TSPC_AlertInd
alerting indication to the user supported
BOOLEAN
Phase 2
TSPC_SvcOnTCH
at least one service on traffic channel supported
BOOLEAN
Phase 2
TSPC_SMS
at least one short message service supported
BOOLEAN
Phase 2
TSPC_SS
at least one supplementary service supported
BOOLEAN
Phase 2
TSPC_AutoAutoMode
automatically enter automatic selection of PLMN mode supported
BOOLEAN
Phase 2
TSPC_BasCharSet
Chars 0‑9, *, # supported
BOOLEAN
Phase 2
TSPC_CalledNumDisp
called number display supported
BOOLEAN
Phase 2
TSPC_DCS
testing DCS1 800
BOOLEAN
Phase 2
TSPC_DetachOnPwrDn
detach on power down supported
BOOLEAN
Phase 2
TSPC_DetachOnSIMRmv
detach on SIM remove supported
BOOLEAN
Phase 2
TSPC_DispRcvSMS
display of received SMS supported
BOOLEAN
Phase 2
TSPC_DualRate
dual rate channel types supported
BOOLEAN
Phase 2
TSPC_EGSM
both standard (PGSM) and extended GSM band supported
BOOLEAN
Phase 2
TSPC_EmgOnly
the only circuit switched basic service is emergency call
BOOLEAN
Phase 2
TSPC_followOnReq
follow-on request procedure supported
BOOLEAN
Phase 2
TSPC_HalfRateData
at least one half rate data supported
BOOLEAN
Phase 2
TSPC_HalfRateSpeech
half rate speech mode supported
BOOLEAN
Phase 2
TSPC_InCallMod
In-Call modification supported
BOOLEAN
Phase 2
TSPC_NoimmConn
at least one service not support immediate connection
BOOLEAN
Phase 2
TSPC_Feat_FND
FND feature supported
BOOLEAN
Phase 2
TSPC_NonCallSS
non call related supplementary service supported
BOOLEAN
Phase 2
TSPC_MTsvc
at least one MT circuit switched basic service supported
BOOLEAN
Phase 2
TSPC_MOsvc
at least one MO circuit switched basic service supported
BOOLEAN
Phase 2
TSPC_PGSM
only standard GSM band supported
BOOLEAN
Phase 2
TSPC_RefusalCall
refusal of call supported
BOOLEAN
Phase 2
TSPC_ReplaceSMS
replace SMS supported
BOOLEAN
Phase 2
TSPC_ReplyProc
(SMS) reply procedures supported
BOOLEAN
Phase 2
TSPC_RFAmp
RF amplification supported
BOOLEAN
Phase 2
TSPC_SDCCHOnly
only SDCCH supported
BOOLEAN
Phase 2
TSPC_Serv_SS_AoCC
Advice of Charge (Charging) SS supported
BOOLEAN
Phase 2
TSPC_Serv_SS_BAIC
Barring of All Incoming Calls SS supported
BOOLEAN
Phase 2
TSPC_Serv_SS_BI
BI SS supported
BOOLEAN
Phase 2
TSPC_Serv_SS_BICRoam
Barring of Incoming Calls when Roaming Outside the Home PLMN Country SS supported
BOOLEAN
Phase 2
TSPC_Serv_SS_BAOC
Barring of all Outgoing Calls SS supported
BOOLEAN
Phase 2
TSPC_Serv_SS_BOIC
Barring of Outgoing International Calls SS supported
BOOLEAN
Phase 2
TSPC_Serv_SS_BOICexHC
Barring of Outgoing International Calls except those directed to the Home PLMN Country SS supported
BOOLEAN
Phase 2
TSPC_Serv_SS_CFB
Call Forwarding on Mobile Subscriber Busy SS supported
BOOLEAN
Phase 2
TSPC_Serv_SS_CFNRy
Call Forwarding on No Reply SS supported
BOOLEAN
Phase 2
TSPC_Serv_SS_CFNRc
Call Forwarding on Mobile Subscriber Not Reachable SS supported
BOOLEAN
Phase 2
TSPC_Serv_SS_CFU
Call Forwarding Unconditional SS supported
BOOLEAN
Phase 2
TSPC_Serv_SS_HOLD
Call Hold SS supported
BOOLEAN
Phase 2
TSPC_Serv_SS_MPTY
multiparty SS supported
BOOLEAN
Phase 2
TSPC_Serv_SS_unstruct
USSD supported
BOOLEAN
Phase 2
TSPC_Serv_TS11
telephony supported
BOOLEAN
Phase 2
TSPC_Serv_TS12
emergency call supported
BOOLEAN
Phase 2
TSPC_Serv_TS21
SMS MT/PP supported
BOOLEAN
Phase 2
TSPC_Serv_TS22
SMS MO/PP supported
BOOLEAN
Phase 2
TSPC_Serv_TS23
SMS cell broadcast supported
BOOLEAN
Phase 2
TSPC_Serv_TS61
alternate speech and G3 fax (TS61) supported
BOOLEAN
Phase 2
TSPC_Serv_TS62
automatic G3 fax (TS62) supported
BOOLEAN
Phase 2
TSPC_Serv_BS21
data circuit duplex async 300 bit/s supported
BOOLEAN
Phase 2
TSPC_Serv_BS22
data circuit duplex async 1 200 bit/s supported
BOOLEAN
Phase 2
TSPC_Serv_BS23
data circuit duplex async 1 200/75 bit/s supported
BOOLEAN
Phase 2
TSPC_Serv_BS24
data circuit duplex async 2 400 bit/s supported
BOOLEAN
Phase 2
TSPC_Serv_BS25
data circuit duplex async 4 800 bit/s supported
BOOLEAN
Phase 2
TSPC_Serv_BS26
data circuit duplex async 9 600 bit/s supported
BOOLEAN
Phase 2
TSPC_Serv_BS31
data circuit duplex sync 1 200 bit/s supported
BOOLEAN
Phase 2
TSPC_Serv_BS32
data circuit duplex sync 2 400 bit/s supported
BOOLEAN
Phase 2
TSPC_Serv_BS33
data circuit duplex sync 4 800 bit/s supported
BOOLEAN
Phase 2
TSPC_Serv_BS34
data circuit duplex sync 9 600 bit/s supported
BOOLEAN
Phase 2
TSPC_Serv_BS41
PAD access 300 bit/s supported
BOOLEAN
Phase 2
TSPC_Serv_BS42
PAD access 1 200 bit/s supported
BOOLEAN
Phase 2
TSPC_Serv_BS43
PAD access 1 200/75 bit/s supported
BOOLEAN
Phase 2
TSPC_Serv_BS44
PAD access 2 400 bit/s supported
BOOLEAN
Phase 2
TSPC_Serv_BS45
PAD access 4 800 bit/s supported
BOOLEAN
Phase 2
TSPC_Serv_BS46
PAD access 9 600 bit/s supported
BOOLEAN
Phase 2
TSPC_Serv_BS51
packet access 2 400 bit/s supported
BOOLEAN
Phase 2
TSPC_Serv_BS52
packet access 4 800 bit/s supported
BOOLEAN
Phase 2
TSPC_Serv_BS53
packet access 9 600 bit/s supported
BOOLEAN
Phase 2
TSPC_Serv_BS61
alternate speech/data (BS61) supported
BOOLEAN
Phase 2
TSPC_Serv_BS81
speech followed data (BS81) supported
BOOLEAN
Phase 2
TSPC_SMSStatusRepCap
SMS status report capabilities supported
BOOLEAN
Phase 2
TSPC_StoreRcvSMSME
Storage of received SMS in ME supported
BOOLEAN
Phase 2
TSPC_StoreRcvSMSSIM
Storage of received SMS in SIM supported
BOOLEAN
Phase 2
TSPC_SIMRmv
SIM removable without power down supported
BOOLEAN
Phase 2
TSPC_SwitchOnOff
switch on/off supported
BOOLEAN
Phase 2
TSPC_TranspDataOnly
only transparent data service supported
BOOLEAN
Phase 2
TSPC_CC
CC protocol for at least one BC supported
BOOLEAN
Phase 2
TSPC_TeleSvc
at least one teleservice supported
BOOLEAN
Phase 2
TSPC_EFR
Set to TRUE for EFR MS which supports any EFR features and FALSE otherwise
BOOLEAN
Phase 2
TSPC_EFR_Speech_v2
Set to TRUE for EFR MS which supports EFR Speech Version 2 and FALSE otherwise
BOOLEAN
Phase 2
TSPC_EFR_Speech_v3
Set to TRUE for EFR MS which supports EFR Specch Version 3 and FALSE otherwise
BOOLEAN
Phase 2
TSPC_EFR_EmgCallBcap
Set to TRUE if received ESETUP message contains bearer capability IE, otherwise FALSE
BOOLEAN
Phase 2
TSPC_FullRateSpeech
full rate speech mode supported – must be TRUE if TSPC_HalfRateSpeech = TRUE
BOOLEAN
Phase 2
TSPC_FullRateOnly
only full rate channel type supported
BOOLEAN
Phase 2
TSPC_StoredListCellSel
Stored List Cell Selection supported
BOOLEAN
Phase 2
TSPC_RGSM
both standard and R- GSM band supported
BOOLEAN
R96
TSPC_VGCS_Listening
VGCS listening supported
BOOLEAN
R96
TSPC_VGCS_Talking
VGCS talking supported
BOOLEAN
R96
TSPC_VGCS_Originating
VGCS call originating supported
BOOLEAN
R96
TSPC_VBS_Listening
VBS listening supported
BOOLEAN
R96
TSPC_VBS_Originating
VBS call originating supported
BOOLEAN
R96
TSPC_Reduced_Monitoring
Reduced monitoring on NCH supported
BOOLEAN
R96
TSPC_MonitorPCH_GroupTransmitMode
Monitor PCH in group transmit mode supported
BOOLEAN
R96
TSPC_Serv_SS_eMLPP
eMLPP service supported
BOOLEAN
R96
TSPC_Serv_SS_CallWaiting
Call waiting SS supported
BOOLEAN
R96
TSPC_Serv_SS_UUS
User-to-User Signalling
BOOLEAN
R00
TSPC_Serv_SS_ImpUUS1
Implicit UUS1
BOOLEAN
R00
TSPC_Serv_SS_Send_UUS1_ALERTING
Sending of implicit UUS1 in the ALERTING message
BOOLEAN
R00
TSPC_Serv_SS_Send_UUS1_CONNECT
Sending of implicit UUS1 in the ALERTING message
BOOLEAN
R00
TSPC_Serv_SS_FollowMe
Follow Me
BOOLEAN
R00
TSPC_Serv_UTDI
User-to-Dispatcher Information
BOOLEAN
R00
TSPC_Serv_Compr_UTDI
Compressed User-to-Dispatcher
BOOLEAN
R00
TSPX_TE_stopbit
Terminal Equipment configuration number stop bits. default value : '0'B, 1 bit
BITSTRING[1]
Phase 2
TSPX_TE_databit
Terminal Equipment configuration number data bits. '0'B, 7bits, '1'B, 8bits - default value : '1'B, 8 bits
BITSTRING[1]
Phase 2
TSPX_TE_FLCT
Terminal Equipment flow control. Type of flow control. 0-outband flow control, 1-inband flow control, 2-no flow control. default : 0, outband flow control
0, 1, 2
Phase 2
TSPX_TE_parity
Terminal Equipment configuration parity. 000=odd, 010=even, 011=none, 100=forced to 0, 101=forced to 1. default : '001'B, no parity
BITSTRING[3]
Phase 2
TSPX_BS_21_itc1
Information Transfer Capability value supported for BS21(async data 300bit/s). default value : '001'B, Unrestricted Digital Information
BITSTRING[3]
Phase 2
TSPX_BS_21_more_itc
more than one Information Transfer Capability value supported by BS21(async data 300bit/s). default value : FALSE, only one itc
BOOLEAN
Phase 2
TSPX_BS_21_T_NT
both Transparent and Non-Transparent supported by BS21(async data 300bit/s). default value : FALSE, not support both transparent and non transparent modes
BOOLEAN
Phase 2
TSPX_BS_21_ce
BS21(async data 300bit/s). Connection Element value used in MO call and if the answer to TSPX_BS_21_T_NT is FALSE, the manufacturer must precise which mode is supported by the MS. default value : '00'B, transparent mode
BITSTRING[2]
Phase 2
TSPX_BS_21_sacp
BS21(async data 300bit/s). Signalling Access Protocol value used in MO call. default value : '001'B, I440/450
BITSTRING[3]
Phase 2
TSPX_BS_21_itc2
other Information Transfer Capability value supported by BS21(async data 300bit/s), it shall be different from the previous one if the answer to TSPX_BS_21_more_itc is TRUE. default value :'001'B, Unrestricted Digital Information
BITSTRING[3]
Phase 2
TSPX_BS_22_itc1
Information Transfer Capability value supported by BS22(async data 1200bit/s). default value : '010'B, 3.1kHz audio, exPLMN
BITSTRING[3]
Phase 2
TSPX_BS_22_more_itc
more than one Information Transfer Capability value supported by BS22(async data 1200bit/s). default value : FALSE, only one itc
BOOLEAN
Phase 2
TSPX_BS_22_T_NT
both Transparent and Non-Transparent supported by BS22(async data 1200bit/s). default value : FALSE, not support both transparent and non transparent modes
BOOLEAN
Phase 2
TSPX_BS_22_ce
BS22(async data 1200bit/s) Connection Element value used in MO call and if the answer to TSPX_BS_22_T_NT is FALSE, the manufacturer must precise which mode is supported by the MS. default value : '01'B, non transparent
BITSTRING[2]
Phase 2
TSPX_BS_22_sacp
BS22(async data 1200bit/s) Signalling Access Protocol value used in MO call. default value : '001'B, I440/450
BITSTRING[3]
Phase 2
TSPX_BS_22_itc2
other Information Transfer Capability value supported by BS22(async data 1200bit/s), it shall be different from the previous one if the answer to TSPX_BS_22_more_itc is TRUE. default value : '010'B, 3.1kHz audio, exPLMN
BITSTRING[3]
Phase 2
TSPX_BS_23_itc
Information Transfer Capability value supported by BS23(async 1200/75 bit/s). default value : '010'B, 3.1kHz audio, exPLMN
BITSTRING[3]
Phase 2
TSPX_BS_23_T_NT
both Transparent and Non-Transparent supported for BS23(async 1200/75 bit/s). default value : FALSE, not support both transparent and non transparent modes
BOOLEAN
Phase 2
TSPX_BS_23_ce
BS23(async 1200/75 bit/s) Connection Element value used in MO call. default value : '00'B, transparent
BITSTRING[2]
Phase 2
TSPX_BS_23_sacp
BS23(async 1200/75 bit/s) Signalling Access Protocol value used in MO call. default value : '001'B, I440/450
BITSTRING[3]
Phase 2
TSPX_BS_24_itc1
Information Transfer Capability value supported by BS24(async 2400 bit/s). default value : '010'B, 3.1kHz audio, exPLMN
BITSTRING[3]
Phase 2
TSPX_BS_24_more_itc
more than one Information Transfer Capability value supported by BS24(async 2400 bit/s). default value : FALSE, only one itc
BOOLEAN
Phase 2
TSPX_BS_24_T_NT
both Transparent and Non-Transparent supported by BS24(async 2400 bit/s). default value : FALSE, not support both transparent and non transparent modes
BOOLEAN
Phase 2
TSPX_BS_24_ce
BS24(async 2400 bit/s) Connection Element value used in MO call and if the answer to TSPX_BS_24_T_NT is FALSE, the manufacturer must precise which mode is supported by the MS. default value : '00'B, transparent
BITSTRING[2]
Phase 2
TSPX_BS_24_sacp
BS24(async 2400 bit/s) Signalling Access Protocol value used in MO call. default value : '001'B, I440/450
BITSTRING[3]
Phase 2
TSPX_BS_24_itc2
other Information Transfer Capability value supported by BS24(async 2400 bit/s), it shall be different from the previous one if the answer to TSPX_BS_24_more_itc is TRUE. default value : '010'B, 3.1kHz audio, exPLMN
BITSTRING[3]
Phase 2
TSPX_BS_25_itc1
Information Transfer Capability value supported by BS25(async 4800 bit/s). default value : '001'B, Unrestricted Digital Information
BITSTRING[3]
Phase 2
TSPX_BS_25_more_itc
more than one Information Transfer Capability value supported by BS25(async 4800 bit/s). default value : FALSE, only one itc
BOOLEAN
Phase 2
TSPX_BS_25_T_NT
both Transparent and Non-Transparent supported by BS25(async 4800 bit/s). default value : FALSE, not support both transparent and non transparent modes
BOOLEAN
Phase 2
TSPX_BS_25_ce
BS25(async 4800 bit/s) Connection Element value used in MO call and if the answer to TSPX_BS_25_T_NT is FALSE, the manufacturer must precise which mode is supported by the MS. default value : '00'B, transparent
BITSTRING[2]
Phase 2
TSPX_BS_25_sacp
BS25(async 4800 bit/s) Signalling Access Protocol value used in MO call. default value : '001'B, I440/450
BITSTRING[3]
Phase 2
TSPX_BS_25_itc2
other Information Transfer Capability value supported by BS25(async 4800 bit/s), it shall be different from the previous one if the answer to TSPX_BS_25_more_itc is TRUE. default value : '001'B, Unrestricted Digital Information
BITSTRING[3]
Phase 2
TSPX_BS_26_itc1
Information Transfer Capability value supported by BS26(async 9600 bit/s). default value : '010'B, 3.1kHz audio, exPLMN
BITSTRING[3]
Phase 2
TSPX_BS_26_more_itc
more than one Information Transfer Capability value supported by BS26(async 9600 bit/s). default value : FALSE, only one itc
BOOLEAN
Phase 2
TSPX_BS_26_T_NT
both Transparent and Non-Transparent supported by BS26(async 9600 bit/s). default value : FALSE, not support both transparent and non transparent modes
BOOLEAN
Phase 2
TSPX_BS_26_ce
BS26(async 9600 bit/s) Connection Element value used in MO call and if the answer to TSPX_BS_26_T_NT is FALSE, the manufacturer must precise which mode is supported by the MS. default value : '00'B, transparent
BITSTRING[2]
Phase 2
TSPX_BS_26_sacp
BS26(async 9600 bit/s) Signalling Access Protocol value used in MO call. default value : '001'B, I440/450
BITSTRING[3]
Phase 2
TSPX_BS_26_itc2
other Information Transfer Capability value supported by BS26, it shall be different from the previous one if the answer to TSPX_BS_26_more_itc is TRUE. default value : '010'B, 3.1kHz audio, exPLMN
BITSTRING[3]
Phase 2
TSPX_BS_31_more_itc
more than one Information Transfer Capability value supported by BS31(sync data 1200 bit/s). default value : FALSE, only one itc
BOOLEAN
Phase 2
TSPX_BS_31_more_sacp
more than one Signalling Access Protocol value supported by BS31(sync data 1200 bit/s). default value : FALSE, only one sacp
BOOLEAN
Phase 2
TSPX_BS_31_itc1
Information Transfer Capability value supported by BS31(sync data 1200 bit/s). default value : '001'B, Unrestricted Digital Information
BITSTRING[3]
Phase 2
TSPX_BS_31_sacp1
Signalling Access Protocol value supported by BS31(sync data 1200 bit/s). default value : '001'B, I440/450
BITSTRING[3]
Phase 2
TSPX_BS_31_itc2
other Information Transfer Capability value supported by BS31(sync data 1200 bit/s), it shall be different from the previous one if the answer to TSPX_BS_31_more_itc is TRUE. default value : '001'B, Unrestricted Digital Information
BITSTRING[3]
Phase 2
TSPX_BS_31_sacp2
other Signalling Access Protocol value supported by BS31(sync data 1200 bit/s), it shall be different from the previous one if the answer to TSPX_BS_31_more_Signalling Access Protocol is TRUE. default value : '001'B, I440/450
BITSTRING[3]
Phase 2
TSPX_BS_32_itc1
Information Transfer Capability value supported by BS32(sync data 2400 bit/s). default value : '010'B, 3.1kHz audio, exPLMN
BITSTRING[3]
Phase 2
TSPX_BS_32_more_itc
more than one Information Transfer Capability value supported by BS32(sync data 2400 bit/s). default value : FALSE, only one itc
BOOLEAN
Phase 2
TSPX_BS_32_more_sacp
more than one Signalling Access Protocol value supported by BS32(sync data 2400 bit/s). default value : FALSE, only one sacp
BOOLEAN
Phase 2
TSPX_BS_32_sacp1
Signalling Access Protocol value supported by BS32(sync data 2400 bit/s). default value : '110'B, X.32
BITSTRING[3]
Phase 2
TSPX_BS_32_X32_T_NT
BS 32(sync data 2400 bit/s) both Transparent and Non-Transparent supported for X32 3.1kHz. default value : FALSE, not support both transparent and non transparent modes
BOOLEAN
Phase 2
TSPX_BS_32_X32_ce
BS32(sync data 2400 bit/s). If the answer to TSPX_BS_32_X32_T_NT is FALSE, the manufacturer must precise which mode is supported by the MS. Connection Element default value : '01'B, non transparent
BITSTRING[2]
Phase 2
TSPX_BS_32_itc2
other Information Transfer Capability value supported by BS32(sync data 2400 bit/s), it shall be different from the previous one if the answer to TSPX_BS_32_more_itc is TRUE. default value : '010'B, 3.1kHz audio, exPLMN
BITSTRING[3]
Phase 2
TSPX_BS_32_sacp2
other Signalling Access Protocol value supported by BS32(sync data 2400 bit/s), it shall be different from the previous one if the answer to TSPX_BS_32_more_sacp is TRUE. default value : '110'B, X.32
BITSTRING[3]
Phase 2
TSPX_BS_33_itc1
Information Transfer Capability value supported by BS33 (sync data 4800 bit/s). default value : '001'B, Unrestricted Digital Information
BITSTRING[3]
Phase 2
TSPX_BS_33_more_itc
more than one Information Transfer Capability value supported by BS33(sync data 4800 bit/s). default value : FALSE, only one itc
BOOLEAN
Phase 2
TSPX_BS_33_more_sacp
more than one Signalling Access Protocol value supported by BS33(sync data 4800 bit/s). default value : FALSE, only one sacp
BOOLEAN
Phase 2
TSPX_BS_33_sacp1
Signalling Access Protocol value supported by BS33(sync data 4800 bit/s). default value : '010'B, X.21
BITSTRING[3]
Phase 2
TSPX_BS_33_X32_T_NT
BS 33(sync data 4800 bit/s) both Transparent and Non-Transparent supported for X32 3.1kHz. default value : FALSE, not support both transparent and non transparent modes
BOOLEAN
Phase 2
TSPX_BS_33_X32_ce
BS33(sync data 4800 bit/s). If the answer to TSPX_BS_33_X32_T_NT is FALSE, the manufacturer must precise which mode is supported by the MS. Connection Element default value : '00'B, transparent
BITSTRING[2]
Phase 2
TSPX_BS_33_itc2
other Information Transfer Capability value supported by BS33(sync data 4800 bit/s), it shall be different from the previous one if the answer to TSPX_BS_33_more_itc is TRUE. default value : '001'B, Unrestricted Digital Information
BITSTRING[3]
Phase 2
TSPX_BS_33_sacp2
other Signalling Access Protocol value supported by BS33(sync data 4800 bit/s), it shall be different from the previous one if the answer to TSPX_BS_33_more_sacp is TRUE. default value : '010'B, X.21
BITSTRING[3]
Phase 2
TSPX_BS_34_itc1
Information Transfer Capability value supported by BS34(sync data 9600 bit/s). default value : '010'B, 3.1kHz audio, exPLMN
BITSTRING[3]
Phase 2
TSPX_BS_34_more_itc
more than one Information Transfer Capability value supported by BS34(sync data 9600 bit/s). default value : FALSE, only one itc
BOOLEAN
Phase 2
TSPX_BS_34_more_sacp
more than one Signalling Access Protocol value supported by BS34(sync data 9600 bit/s). default value : FALSE, only one sacp
BOOLEAN
Phase 2
TSPX_BS_34_sacp1
Signalling Access Protocol value supported by BS34(sync data 9600 bit/s). default value : '001'B, I440/450
BITSTRING[3]
Phase 2
TSPX_BS_34_X32_T_NT
BS 34(sync data 9600 bit/s) both Transparent and Non-Transparent supported for X32 3.1kHz. default value : FALSE, not support both transparent and non transparent modes
BOOLEAN
Phase 2
TSPX_BS_34_X32_ce
BS34(sync data 9600 bit/s). If the answer to TSPX_BS_34_X32_T_NT is FALSE, the manufacturer must precise which mode is supported by the MS. Connection Element default value : '00'B, transparent
BITSTRING[2]
Phase 2
TSPX_BS_34_itc2
other Information Transfer Capability value supported by BS34(sync data 9600 bit/s), it shall be different from the previous one if the answer to TSPX_BS_34_more_itc is TRUE. default value : '010'B, 3.1kHz audio, exPLMN
BITSTRING[3]
Phase 2
TSPX_BS_34_sacp2
other Signalling Access Protocol value supported by BS34(sync data 9600 bit/s), it shall be different from the previous one if the answer to TSPX_BS_34_more_sacp is TRUE. default value : '001'B, I440/450
BITSTRING[3]
Phase 2
TSPX_BS_41_T_NT
BS41(PAD access 300 bit/s) both Transparent and Non-Transparent supported . default value : FALSE, not support both
BOOLEAN
Phase 2
TSPX_BS_41_ce
Connection Element value used in BS41(PAD access 300 bit/s) MO call. default value : '00'B, transparent
BITSTRING[2]
Phase 2
TSPX_BS_42_T_NT
BS42(PAD access 1200 bit/s) both Transparent and Non-Transparent supported . default value : FALSE, not support both transparent and non transparent modes
BOOLEAN
Phase 2
TSPX_BS_42_ce
Connection Element value used in BS42(PAD access 1200 bit/s) MO call. default value : '00'B, transparent
BITSTRING[2]
Phase 2
TSPX_BS_43_T_NT
BS43(PAD access 1200/75 bit/s) both Transparent and Non-Transparent supported . default value : FALSE, not support both transparent and non transparent modes
BOOLEAN
Phase 2
TSPX_BS_43_ce
Connection Element value used in BS43(PAD access 1200/75 bit/s) MO call. default value : '00'B, transparent
BITSTRING[2]
Phase 2
TSPX_BS_44_T_NT
BS44(PAD access 2400 bit/s) both Transparent and Non-Transparent supported . default value : FALSE, not support both transparent and non transparent modes
BOOLEAN
Phase 2
TSPX_BS_44_ce
Connection Element value used in BS44(PAD access 2400 bit/s) MO call. default value : '00'B, transparent
BITSTRING[2]
Phase 2
TSPX_BS_45_T_NT
BS45(PAD access 4800 bit/s) both Transparent and Non-Transparent supported . default value : FALSE, not support both transparent and non transparent modes
BOOLEAN
Phase 2
TSPX_BS_45_ce
Connection Element value used in BS45(PAD access 4800 bit/s) MO call. default value : '00'B, transparent
BITSTRING[2]
Phase 2
TSPX_BS_46_T_NT
BS46(PAD access 9600 bit/s) both Transparent and Non-Transparent supported . default value : FALSE, not support both transparent and non transparent modes
BOOLEAN
Phase 2
TSPX_BS_46_ce
Connection Element value used in BS46(PAD access 9600 bit/s) MO call. default value : '00'B, transparent
BITSTRING[2]
Phase 2
TSPX_BS_61_S
synchronous data supported by BS 61(alternate speech/data) . default value : TRUE, synchronous mode
BOOLEAN
Phase 2
TSPX_BS_61_S_more_ur
more than one user rate for synchronous data service supported by BS61(alternate speech/data). default value : FALSE, only ine user rate
BOOLEAN
Phase 2
TSPX_BS_61_S_ur1
user rate value supported for synchronous data service of BS61(alternate speech/data). default value : '0100'B, 4.8 kbit/s
BITSTRING[4]
Phase 2
TSPX_BS_61_S_ur2
another user rate value supported for synchronous data service of BS61(alternate speech/data). it shall be different from the previous one if the answer to TSPX_BS_61_S_more_ur is TRUE. default value : '0100'B, 4.8 kbit/s
BITSTRING[4]
Phase 2
TSPX_BS_61_A
asynchronous data service supported by BS61(alternate speech/data) . default value : TRUE, asynchronous
BOOLEAN
Phase 2
TSPX_BS_61_A_ur1
user rate value supported for asynchronous data service of BS61(alternate speech/data). default value : '0101'B, 9.6 kbit/s
BITSTRING[4]
Phase 2
TSPX_BS_61_A_ur1_T_NT
both Transparent and Non-Transparent supported for the rate TSPX_BS_61_A_ur1 of BS61(alternate speech/data). default value : FALSE, not support both transparent and non transparent modes
BOOLEAN
Phase 2
TSPX_BS_61_A_ur1_ce
BS61(alternate speech/data). If the answer to TSPX_BS_61_A_ur1_T_NT is FALSE, the manufacturer must precise which mode is supported by the MS. Connection Element default value : '00'B, transparent
BITSTRING[2]
Phase 2
TSPX_BS_61_A_more_ur
more than one user rate for asynchronous data service supported by BS61(alternate speech/data). default value : FALSE, only one user rate
BOOLEAN
Phase 2
TSPX_BS_61_A_ur2
another user rate value supported for asynchronous data service of BS61(alternate speech/data).. it shall be different from the previous one if the answer to TSPX_BS_61_A_more_ur is TRUE. default value : '0101'B, 9.6 kbit/s
BITSTRING[4]
Phase 2
TSPX_BS_61_A_ur2_T_NT
BS61(alternate speech/data). both Transparent and Non-Transparent supported for the rate TSPX_BS_61_A_ur2 of BS61. default value : FALSE, not support both transparent and non transparent modes
BOOLEAN
Phase 2
TSPX_BS_81_S
synchronous data supported by BS 81(speech followed by data). default value : TRUE, synchronous mode
BOOLEAN
Phase 2
TSPX_BS_81_S_more_ur
more than one user rate for synchronous data service supported by BS81(speech followed by data). default value : FALSE, only one user rate
BOOLEAN
Phase 2
TSPX_BS_81_S_ur1
user rate value supported for synchronous data service of BS81(speech followed by data). default value : '0101'B, 9.6 kbit/s
BITSTRING[4]
Phase 2
TSPX_BS_81_S_ur2
another user rate value supported for synchronous data service of BS81(speech followed by data). it shall be different from the previous one if the answer to TSPX_BS_81_S_more_ur is TRUE. default value : '0101'B, 9.6 kbit/s
BITSTRING[4]
Phase 2
TSPX_BS_81_A
asynchronous data service supported by BS81(speech followed by data). default value : TRUE, asynchronous mode
BOOLEAN
Phase 2
TSPX_BS_81_A_ur1
user rate value supported for asynchronous data service of BS81(speech followed by data). default value : '0100'B, 4.8 kbit/s
BITSTRING[4]
Phase 2
TSPX_BS_81_A_ur1_T_NT
both Transparent and Non-Transparent supported for the rate TSPX_BS_81_A_ur1 of BS81(speech followed by data). default value : FALSE, not support both transparent and non transparent modes
BOOLEAN
Phase 2
TSPX_BS_81_A_ur1_ce
BS81(speech followed by data). if the answer to TSPX_BS_81_A_ur1_T_NT is FALSE, the manufacturer must precise which mode is supported by the MS. Connection Element default value : '01'B, non transparent
BITSTRING[2]
Phase 2
TSPX_BS_81_A_more_ur
more than one user rate for asynchronous data service supported by BS81(speech followed by data). default value : FALSE, only one user rate
BOOLEAN
Phase 2
TSPX_BS_81_A_ur2
another user rate value supported for asynchronous data service of BS81(speech followed by data). it shall be different from the previous one if the answer to TSPX_BS_81_A_more_ur is TRUE. default value : '0100'B, 4.8 kbit/s
BITSTRING[4]
Phase 2
TSPX_BS_81_A_ur2_T_NT
both Transparent and Non-Transparent supported for the rate TSPX_BS_81_A_ur2 of BS81(speech followed by data). default value : FALSE, not support both transparent and non transparent modes
BOOLEAN
Phase 2
TSPX_TS_61_T_NT
both Transparent and Non-Transparent supported for TS61(alternate speech and G3 fax). default value : FALSE, not support both transparent and non transparent modes
BOOLEAN
Phase 2
TSPX_TS_61_ce
TS61(alternate speech and G3 fax). if the answer to TSPX_TS_61_T_NT is FALSE, the manufacturer must precise which mode is supported by the MS. Connection Element default value : '01'B, non transparent
BITSTRING[2]
Phase 2
TSPX_TS_61_ur1
user rate for TS61(alternate speech and G3 fax). default value : '0101'B, 9.6 kbit/s
BITSTRING[4]
Phase 2
TSPX_TS_61_more_ur
more than one user rate supported for TS61(alternate speech and G3 fax). default value : FALSE, only one user rate
BOOLEAN
Phase 2
TSPX_TS_61_ur2
another user rate for TS61(alternate speech and G3 fax), it shall be different from the previous one if the answer to TSPX_TS_61_more_ur is TRUE. default value : '0101'B, 9.6 kbit/s
BITSTRING[4]
Phase 2
TSPX_TS_62_T_NT
both Transparent and Non-Transparent supported for TS62(automatic G3 fax). default value : FALSE, not support both transparent and non transparent modes
BOOLEAN
Phase 2
TSPX_TS_62_ce
TS62(automatic G3 fax). if the answer to TSPX_TS_62_T_NT is FALSE, the manufacturer must precise which mode is supported by the MS. Connection Element default value : '00'B, transparent
BITSTRING[2]
Phase 2
TSPX_TS_62_ur1
user rate for TS62(automatic G3 fax). default value : '0100'B, 4.8 kbit/s
BITSTRING[4]
Phase 2
TSPX_TS_62_more_ur
more than one user rate supported by TS62(automatic G3 fax). default value : FALSE, only one user rate
BOOLEAN
Phase 2
TSPX_TS_62_ur2
another user rate for TS62(automatic G3 fax), it shall be different from the previous one if the answer to TSPX_TS_62_more_ur is TRUE. default value : '0100'B, 4.8 kbit/s
BITSTRING[4]
Phase 2
TSPX_DTMF
call control capabilities: value '1'B means MS supports DTMF
BITSTRING[1]
Phase 2
TSPX_modF
any non signalling full rate channel mode for TC_26_6_4_1
BITSTRING[8]
Phase 2
TSPX_modH
any non signalling half channel mode for TC_26_6_4_1
BITSTRING[8]
Phase 2
TSPX_anymod
Any supported channel mode value except signalling and Full rate speech.
BITSTRING[8]
Phase 2
TSPX_CKSNA
cipher key sequence number GSM 04.08, 10.5.1.2
BITSTRING[3]
Phase 2
TSPX_CKSNB
cipher key sequence number GSM 04.08, 10.5.1.2
BITSTRING[3]
Phase 2
TSPX_CKSNC
cipher key sequence number GSM 04.08, 10.5.1.2
BITSTRING[3]
Phase 2
TSPX_CKSNDef
default cipher key sequence number GSM 04.08, 10.5.1.2
BITSTRING[3]
Phase 2
TSPX_RfPwrCap
RF power capability
GSM: '000'B Class1 to '100'B Class 5
DCS: '000'B Class1 to '010'B Class 3
BITSTRING[3]
Phase 2
TSPX_RevLevel
Revision level of classmark 1 – '00'B Phase 1, '01'B Phase 2
BITSTRING[2]
Phase 2
TSPX_CiphAlgA5_1
Default Algorithm - A5/1 algorithm: NB '0'B : available, '1'B: not available
BITSTRING[1]
Phase 2
TSPX_CiphAlgA5_2
A5/2 algorithm: '1'B : available, '0'B: not available
BITSTRING[1]
Phase 2
TSPX_CiphAlgA5_3
A5/3 algorithm: '1'B : available, '0'B: not available
BITSTRING[1]
Phase 2
TSPX_CiphAlgA5_4
A5/4 algorithm: '1'B : available, '0'B: not available
BITSTRING[1]
Phase 2
TSPX_CiphAlgA5_5
A5/5 algorithm: '1'B : available, '0'B: not available
BITSTRING[1]
Phase 2
TSPX_CiphAlgA5_6
A5/6 algorithm: '1'B : available, '0'B: not available
BITSTRING[1]
Phase 2
TSPX_CiphAlgA5_7
A5/7 algorithm: '1'B : available, '0'B: not available
BITSTRING[1]
Phase 2
TSPX_pSyncCap
pseudo synchronization capability, '0'B: not present '1'B: present
BITSTRING[1]
Phase 2
TSPX_SSscrnInd
SS screen indicator – GSM 04.80
BITSTRING[2]
Phase 2
TSPX_SMCap
Support of mobile terminated point to point short messages , '0'B: not present '1'B: present
BITSTRING[1]
Phase 2
TSPX_frqCap
EGSM frequency capability. DCS: reserved, GSM: '0'B not support extension band, '1'B support extension band
BITSTRING[1]
Phase 2
TSPX_ClsMk3
classmark 3 indicator, '0'B no addition capability info, '1'B additional capability info in class mark 3
BITSTRING[1]
Phase 2
TSPX_ESIND
Controlled Early Classmark Sending option imlementation – default =0, not implemented
BITSTRING[1]
Phase 2
TSPX_RfPwrCapAmp
RF power capability with external RF amplifier
GSM: '000'B Class1 to '100'B Class 5
DCS: '000'B Class1 to '010'B Class 3
BITSTRING[3]
Phase 2
TSPX_DTMFInd
DTMF indication to user supported
BOOLEAN
Phase 2
TSPX_IMEI
IMEI of the MS.
HEXSTRING
Phase 2
TSPX_IMEISV
IMEISV of the MS.
Used in: TC_26_6_8_5, TC_26_7_3_1
HEXSTRING
Phase 2
TSPX_TC1M
timer value for GSM timer TC1M (for SMS)
INTEGER
Phase 2
TSPX_MaxCPDataRetx
max. number of CP data retransmissions for SMS
INTEGER
Phase 2
TSPX_ Immconn
Immediate connect for telephony supported ?
BOOLEAN
Phase 2
TSPX_Uupd
user-user protocol discriminator for TC_26_8_3
BITSTRING[8]
Phase 2
TSPX_UuInfo
user-user information for TC_26_8_3
OCTETSTRING
Phase 2
TSPX_UIC
VGCS uplink identity code
BITSTRING[6]
R96
TSPX_T_Term
Max. wait time for termination of a MO call after sending TERMINATION REQUEST
INTEGER (ms)
R96
A.7.2 MMI information
Description
Release
How is the Accumulated Call Meter (ACM) on the SIM read ?
NOTE: Used in Operation OO_ACMIncCHK and OO_ACMReading.
Phase 2
How is the ACM on the SIM reset to zero, and ACMmax set to 2 units?
NOTE: Used in Operation OO_ACMSetting.
Phase 2
How is power amplification added to the mobile and removed?
NOTE: Used in Operation OO_AddPwrAmp and OO_RemvPwrAmp.
Phase 2
What alerting indication is given by the mobile?
NOTE: Used in Operation OO_AltIndCHK.
Phase 2
How is the called party number displayed on the mobile?
NOTE: Used in Operation OO_CalledNumCHK and OO_CalledPtyNumCHK.
Phase 2
How is a call placed on Hold?
NOTE: Used in Operation OO_CallHold.
Phase 2
How is the presence of short messages checked in the mobile and how are they displayed?
NOTE: Used in Operation OO_CheckAllSMPresentBut4th and OO_CheckMessageDisplayed and OO_DisplaySMAndSendReplySM and OO_ReadSMAndRemove and OO_RecallAndDisplaySM.
Phase 2
How is the presence of Cell Broadcast short messages in the mobile checked?
NOTE: Used in Operation OO_CheckCBSMReceived.
Phase 2
How is it checked whether the memory capacity of the SIM has been exceeded?
NOTE: Used in Operation OO_CheckMCEFOnSIM and OO_CheckMCEFOnSIMUnset.
Phase 2
How and where is the SIM inserted and removed?
NOTE: Used in Operation OO_ConnectSIMSimulator and OO_SIMIns and OO_SIM2Ins and OO_SIM3Ins and OO_SIMRmv.
Phase 2
Does the MS have an 'END' key? If not, what method is used to replace its function?
NOTE: Used in Operation OO_DepressEndKey.
Phase 2
How is a number entered in order to make an outgoing call?
NOTE: Used in Operation OO_DiallCalledNum.
Phase 2
How is a reply to a received short message sent?
NOTE: Used in Operation OO_DisplaySMAndSendReplySM.
Phase 2
How is it checked which DTMF character has been sent?
NOTE: Used in Operation OO_DTMFIndCHK.
Phase 2
How is the message store of the MS emptied?
NOTE: Used in OO_EmptyMessageStorage.
Phase 2
How is a password on the MS entered?
NOTE: Used in Operation OO_EnterPswd.
Phase 2
How is an incoming call answered?
NOTE: Used in Operation OO_HookOff.
Phase 2
For each service on the MS which requires the MS to be connected to an interface on other equipment (e.g. a computer), how is that interface set up for the purpose?
NOTE: Used in Operation OO_IFsetup.
Phase 2
How is an In-Call modification initiated on the MS?
NOTE: Used in Operation OO_InCallMod.
Phase 2
For each mobile originating basic service supported by the MS, how is the MS configured to make an outgoing call on that service?
NOTE: Used in Operation OO_InitCall.
Phase 2
How is the MS to configured accept standard MMI sequences for the initiation of supplementary services?
NOTE: Used in Operation OO_InitSS
Phase 2
How is the MS checked whether it is in the normal service state (idle, updated).
NOTE: Used in Operation OO_InServiceCHK and OO_PressKeyWhenInService.
Phase 2
How is a Multi-Party call initiated on the MS.
NOTE: Used in Operation OO_MptyCall
Phase 2
How is the MS configured to store received Class 1 short messages in the mobile equipment (rather than in the SIM)?
NOTE: Used in Operation OO_MSSetupStoreClass1SMInMEMemory.
Phase 2
How is the list of available PLMNs checked?
NOTE: Used in Operation OO_PLMNsCHK.
Phase 2
How is the PLMN selection mode switched to automatic selection.
NOTE: Used in operation OO_PLMNselModeAuto.
Phase 2
How is the PLMN selection mode switched to manual selection.
NOTE: Used in operation OO_PLMNselModeMan.
Phase 2
How is the power source for the MS removed and replaced. (Note, this is not the same as switching the Mobile on and off using the on/off switch.)
NOTE: Used in operation OO_PowerUp and OO_PowerDown.
Phase 2
How is a short message removed from the message store?
NOTE: Used in operation OO_ReadSMAndRemove.
Phase 2
When in manual PLMN selection mode, how is a PLMN selected?
NOTE: Used in OperationOO_SelPLMN
Phase 2
How is a short message sent from the MS?
NOTE: Used in operation OO_SendMOShortMessage.
Phase 2
How is an SMS COMMAND message sent to delete the last short message sent?
NOTE: Used in OO_SendSMSCOMMANDDe.
Phase 2
How is an SMS COMMAND message sent enquiring about the last short message sent?
NOTE: Used in OO_SendSMS_COMMANDEnq
Phase 2
How is Call Refusal set on the MS?
NOTE: Used in Operation OO_SetRefuseCall.
Phase 2
How is a DTMF digit sent?
NOTE: Used in operation OO_ShortKeyDepr.
Phase 2
How is it checked whether a supplementary service result is correct?
NOTE: Used in Operation OO_SSresultCHK
Phase 2
How is the MS switched on and off?
NOTE: Used in operation OO_SwitchOn and OO_SwitchOff.
Phase 2
How is a call cleared?
NOTE: Used in operation OO_TermCall.
Phase 2
How does the ASCI MS indicate to the user that an user action is needed for showing the desire of talking?
NOTE: Used in operation OO_CheckAsciUserTalkInd.
R96
How is a desire of talking from the user set at the ASCI MS?
NOTE: Used in operation OO_AsciUserDesireTalking.
R96
How does the MS indicate a received notification for a group or broadcast call? How is the call reference indicated?
NOTE: Used in operation OO_CheckNotifInd
R96
How is a rejection of a group or broadcast call set at the MS when the new group or broadcast call has been indicated?
NOTE: Used in operation OO_RejecAsciCall
R96
How does the MS indicate a rejection to an intended request of the user?
NOTE: Used in operation OO_CheckAsciReject
R96
How does the MS indicate a received paging information for an MT call when it is in group receive mode or group transmit mode
NOTE: Used in operation OO_CheckPagingInfoIndication
R96
How is a rejection of an MT call set at the MS when it is in group receive mode or group transmit mode and has indicated a paging for the MT call?
NOTE: Used in operation OO_RejectMTCall
R96
How does the MS indicate the downlink channel is muted?
NOTE: Used in operation OO_DownlinkMuted
R96
How is the MS set to be ready for a VGCS configuration or for a VBS configuration?
NOTE: Used in operation OO_Ifsetup_Asci
R96
How is a VGCS or a VBS call at the MS initiated?
NOTE: Used in operation OO_Initcall_Asci
R96
How is a VGCS or a VBS fast call at the MS initiated?
NOTE: Used in operation OO_InitImmediateCall_Asci
R96
How does the MS join a notified VGCS or a VBS call?
NOTE: Used in operation OO_Join_AsciCall
R96
How does the MS end an uplink access in a VGCS call?
NOTE: Used in operation OO_VGCS_QuitUplinkAccess
R96
How does the MS request an uplink access in a VGCS call?
NOTE: Used in operation OO_VGCS_RequestUplinkAccess
R96
How is a priority level set at the MS for an attemp VGCS or VBS call?
NOTE: Used in operation OO_SelectPriorityLevel
R96
How is a VGCS or VBS listening stopped?
NOTE: Used in operation OO_StopAsciListening
R96
How does the MS indicate that a call has been automatically answered?
NOTE: Used in operation OO_CheckCallAutoAnswered
R96
How is implicit USS1 activated ?
NOTE: Used in operation OO_ActivateImplicitUUS1
R00
How does the MS display a UUS string ?
NOTE: Used in operation OO_CheckUUSDisplay
R00
How does the MS display the Follow Me responses received from the network ?
NOTE: Used in operation OO_CheckUssdDisplay
R00
How is the User-to-Dispatcher activated?
NOTE: Used in operation OO_ActivateUTDI
R00
A.7.3 Test house specified parameters
Item
Description
Type/Allowed values
Value chosen
Release
TSPX_AltNb
use alternative neighbour cells description. default : FALSE
BOOLEAN
Phase 2
TSPX_CphAlgA
ciphering algorithm identifier – '000' A5/1 to '110' A5/7
OCTETSTRING [1]
Phase 2
TSPX_CphAlgB
ciphering algorithm identifier – '000' A5/1 to '110' A5/7
OCTETSTRING [1]
Phase 2
TSPX_CphAlgC
ciphering algorithm identifier – '000' A5/1 to '110' A5/7
OCTETSTRING [1]
Phase 2
TSPX_CphAlgD
ciphering algorithm identifier – '000' A5/1 to '110' A5/7
OCTETSTRING [1]
Phase 2
TSPX_CphAlgE
ciphering algorithm identifier – '000' A5/1 to '110' A5/7
OCTETSTRING [1]
Phase 2
TSPX_CphAlgDef
default ciphering algorithm identifier – '000' A5/1 to '110' A5/7
OCTETSTRING [1]
Phase 2
TSPX_NoOfHoAccA
number of handover access bursts, value range 10 - 20 TC_26_6_5_1(M=1, 8) TC_26_6_5_2(M=1,8) TC_26_6_5_4_1 TC_26_10_2_4_1 TC_26_10_2_4_2 TC_26_12_2_1(M=1,4,7,11) TC_26_12_2_2(M=1,4,7,8,11)
TC_26_11_2_2_1 TC_26_11_5_1 TC_26_11_5_2
INTEGER
Phase 2
TSPX_NoOfHoAccB
number of handover access bursts, value range 10 - 20 TC_26_6_5_1(M=2) TC_26_6_5_2(M=6,9) TC_26_12_2_1(M=2,5,8,13) TC_26_12_2_2(M=2,5,9)
TC_26_11_2_2_1
INTEGER
Phase 2
TSPX_NoOfHoAccC
number of handover access bursts, value range 10 - 20 TC_26_6_5_1(M=3) TC_26_6_5_2(M=7) TC_26_12_2_1(M=3,6,9,15) TC_26_12_2_2(M=3,6,10)
TC_26_11_2_2_1
INTEGER
Phase 2
TSPX_NoOfHoAccD
number of handover access bursts, value range 5 - 10 TC_26_6_5_1(M=4, 7) TC_26_6_5_2(M=2) TC_26_12_2_1(M=10)
INTEGER
Phase 2
TSPX_NoOfHoAccE
number of handover access bursts, value range 5 - 10 TC_26_6_5_1(M=5) TC_26_6_5_2(M=5) TC_26_12_2_2(M=12)
INTEGER
Phase 2
TSPX_NoOfHoAccF
number of handover access bursts, value range 5 - 10 TC_26_6_5_1(M=6) TC_26_6_5_2(M=10) TC_26_12_2_1(M=14)
INTEGER
Phase 2
TSPX_NoOfHoAccG
number of handover access bursts, value range 2 – 5 TC_26_6_5_2_3
INTEGER
Phase 2
TSPX_NoOfHoAccH
number of handover access bursts, value range 2 - 5 TC_26_6_5_2_4
INTEGER
Phase 2
TSPX_NoOfHoAccI
number of handover access bursts, value range 2 - 5 TC_26_10_2_4_1
INTEGER
Phase 2
TSPX_HoRefA
Hand over reference,
GSM 04.08, 10.5.2.15 TC_26_6_5_1(M=1) TC_26_6_5_2(M=1) TC_26_6_5_4_1 TC_26_10_2_4_2 TC_26_12_2_1(M=1,11) TC_26_12_2_2(M=1)
TC_26_11_5_1 TC_26_11_5_2
BITSTRING [8]
Phase 2
TSPX_HoRefB
Hand over reference,
GSM 04.08, 10.5.2.15 TC_26_6_5_1(M=2, 8) TC_26_6_5_2(M=2) TC_26_12_2_1(M=2,12)
TC_26_11_2_2_1
BITSTRING [8]
Phase 2
TSPX_HoRefC
Hand over reference,
GSM 04.08, 10.5.2.15 TC_26_6_5_1(M=3) TC_26_6_5_2(M=3) TC_26_12_2_1(M=3,13) TC_26_12_2_2(M=3,6,10)
TC_26_11_2_2_1
BITSTRING [8]
Phase 2
TSPX_HoRefD
Hand over reference,
GSM 04.08, 10.5.2.15 TC_26_6_5_1(M=4) TC_26_6_5_2(M=4) TC_26_12_2_1(M=4,14)
BITSTRING [8]
Phase 2
TSPX_HoRefE
Hand over reference,
GSM 04.08, 10.5.2.15 TC_26_6_5_1(M=5) TC_26_6_5_2(M=5) TC_26_12_2_1(M=5,15)
BITSTRING [8]
Phase 2
TSPX_HoRefF
Hand over reference,
GSM 04.08, 10.5.2.15 TC_26_6_5_1(M=6) TC_26_6_5_2(M=6) TC_26_12_2_1(M=6)
BITSTRING [8]
Phase 2
TSPX_HoRefG
Hand over reference,
GSM 04.08, 10.5.2.15 TC_26_6_5_1(M=7) TC_26_6_5_2(M=7) TC_26_12_2_1(M=7)
BITSTRING [8]
Phase 2
TSPX_HoRefH
Hand over reference,
GSM 04.08, 10.5.2.15 TC_26_6_5_2(M=8) TC_26_12_2_1(M=8)
BITSTRING [8]
Phase 2
TSPX_HoRefI
Hand over reference,
GSM 04.08, 10.5.2.15 TC_26_6_5_2(M=9) TC_26_12_2_1(M=9)
BITSTRING [8]
Phase 2
TSPX_HoRefJ
Hand over reference,
GSM 04.08, 10.5.2.15 TC_26_6_5_2(M=10) TC_26_12_2_1(M=10)
BITSTRING [8]
Phase 2
TSPX_HSN
Hopping sequence number
value range: 0 – 63 (0=Cyclic Hopping)
INTEGER
Phase 2
TSPX_IMSI
IMSI of the MS – Phase 2 Test SIM value - 001010123456063
HEXSTRING
Phase 2
TSPX_Ki
default authentication key used in testing
BITSTRING
Phase 2
TSPX_MAIO
mobile allocation index offset, value range: 0 - 63
INTEGER
Phase 2
TSPX_MaxRetrans
Max-Retrans –Maximum number of re-transmissons of Channel Requests as defined in System Information (values 1, 2, 4 or 7 re-transmissions)
INTEGER
Phase 2
TSPX_MSTxpwrMax
maximum output power from MS GSM 05.05, 4.1.1
0..31
Phase 2
TSPX_PwrlvlA
MS power level, value between 2 to 15 GSM 05.05, 4.1.1
INTEGER
Phase 2
TSPX_PwrlvlB
MS power level, value between 2 to 15 GSM 05.05, 4.1.1
INTEGER
Phase 2
TSPX_PwrlvlC
MS power level, value between 2 to 15 GSM 05.05, 4.1.1
INTEGER
Phase 2
TSPX_PwrlvlD
MS power level, value between 2 to 15 GSM 05.05, 4.1.1
INTEGER
Phase 2
TSPX_RANDA
challenge RAND
BITSTRING [128]
Phase 2
TSPX_RANDB
challenge RAND
BITSTRING [128]
Phase 2
TSPX_RANDC
challenge RAND
BITSTRING [128]
Phase 2
TSPX_RANDDef
default challenge RAND
BITSTRING [128]
Phase 2
TSPX_SDCCH4SubA
TDMA offset of SDCCH/4 subchannel
BITSTRING[2]
Phase 2
TSPX_SDCCH4SubB
TDMA offset of SDCCH/4 subchannel
BITSTRING[2]
Phase 2
TSPX_SDCCH4SubC
TDMA offset of SDCCH/4 subchannel
BITSTRING[2]
Phase 2
TSPX_SDCCH4SubDef
TDMA offset of default SDCCH/4 subchannel
BITSTRING[2]
Phase 2
TSPX_SDCCH8SubA
TDMA offset of SDCCH/8 subchannel
BITSTRING[3]
Phase 2
TSPX_SDCCH8SubB
TDMA offset of SDCCH/8 subchannel
BITSTRING[3]
Phase 2
TSPX_SDCCH8SubC
TDMA offset of SDCCH/8 subchannel
BITSTRING[3]
Phase 2
TSPX_SDCCH8SubD
TDMA offset of SDCCH/8 subchannel
BITSTRING[3]
Phase 2
TSPX_SDCCH8SubE
TDMA offset of SDCCH/8 subchannel
BITSTRING[3]
Phase 2
TSPX_SDCCH8SubF
TDMA offset of SDCCH/8 subchannel
BITSTRING[3]
Phase 2
TSPX_SDCCH8SubG
TDMA offset of SDCCH/8 subchannel
BITSTRING[3]
Phase 2
TSPX_SDCCH8SubDef
TDMA offset of default SDCCH/8 subchannel
BITSTRING[3]
Phase 2
TSPX_TimadvA
timing advance in bit periods
INTEGER
Phase 2
TSPX_TimadvB
timing advance in bit periods
INTEGER
Phase 2
TSPX_TimadvC
timing advance in bit periods
INTEGER
Phase 2
TSPX_TmSltA
time slot, GSM 04.08 10.5.2.5
BITSTRING [3]
Phase 2
TSPX_TmSltB
time slot, GSM 04.08 10.5.2.5
BITSTRING [3]
Phase 2
TSPX_TmSltC
time slot, GSM 04.08 10.5.2.5
BITSTRING [3]
Phase 2
TSPX_TmSltD
time slot, GSM 04.08 10.5.2.5
BITSTRING [3]
Phase 2
TSPX_TmSltE
time slot, GSM 04.08 10.5.2.5
BITSTRING [3]
Phase 2
TSPX_TmSltF
time slot, GSM 04.08 10.5.2.5
BITSTRING [3]
Phase 2
TSPX_TmSltG
time slot, GSM 04.08 10.5.2.5
BITSTRING [3]
Phase 2
TSPX_TmSltDef
default time slot, GSM 04.08 10.5.2.5
BITSTRING [3]
Phase 2
TSPX_TmSltNotZero
time slot, arbitrarily value, but not zero.
BITSTRING [3]
Phase 2
TSPX_TmSltNotZero1
time slot, arbitrarily value, but not zero and not TSPX_TmSltNotZero
BITSTRING [3]
Phase 2
TSPX_Txint
Tx-Integer, no of slots to spread transmission (values 3,4,5,6,7,8,9,10,11,12,14,16, 20,25,32 or 50)
INTEGER
Phase 2
TSPX_TscA
training sequence code, GSM 04.08 10.5.2.5
BITSTRING [3]
Phase 2
TSPX_TscB
training sequence code, GSM 04.08 10.5.2.5
BITSTRING [3]
Phase 2
TSPX_TscC
training sequence code, GSM 04.08 10.5.2.5
BITSTRING [3]
Phase 2
TSPX_TscD
training sequence code, GSM 04.08 10.5.2.5
BITSTRING [3]
Phase 2
TSPX_TscE
training sequence code, GSM 04.08 10.5.2.5
BITSTRING [3]
Phase 2
TSPX_TscF
training sequence code, GSM 04.08 10.5.2.5
BITSTRING [3]
Phase 2
TSPX_TscG
training sequence code, GSM 04.08 10.5.2.5
BITSTRING [3]
Phase 2
TSPX_TscDef
default training sequence code, GSM 04.08 10.5.2.5
BITSTRING [3]
Phase 2
TSPX_T3122
value of timer T3122, HEXSTRING[2]
HEXSTRING [2]
Phase 2
TSPX_TCHcarrierA_ho
the value can be choosen arbitrarily from cell allocation of cell A (GSM), but not BCCH carrier .possible value is : 10, 17, 26, 34, 42, 45, 46, 52, 59, 66, 73, 74, 75, 76, 108, 114
INTEGER
Phase 2
TSPX_TCHcarrierA_hod
the value can be choosen arbitrarily from cell allocation of cell A (DCS), but not BCCH carrier . possible value is : 734,741,754,759,762,766,767,773,775,779,782,791,798,829,832,844
INTEGER
Phase 2
TSPX_TCHcarrierB
TCH and SDCCH channel frequency number of cell B (GSM)
INTEGER
Phase 2
TSPX_TCHcarrierBd
TCH and SDCCH channel frequency number of cell B (DCS)
INTEGER
Phase 2
TSPX_TCHcarrierB_ho
the value can be choosen arbitrarily from cell allocation of cell B (GSM), but not BCCH carrier . possibles value is : 14,18,22,24,30,31,38,60,66,73,74,75,76,108,114
INTEGER
Phase 2
TSPX_TCHcarrierB_hod
not BCCH carrier of cell B. the value can be choosen arbitrarily from cell allocation of cell B (DCS), which is (739,743,746,749,756,758,761,771,779,782,791,798,829,832,844)
INTEGER
Phase 2
TSPX_TCHcarrierB2_ho
Choosen arbitrarly from cell allocation B for GSM HO cases, but not BCCH carrier!
INTEGER
Phase 2
TSPX_TCHcarrierB2_hod
Choosen arbitrarly from cell allocation B for DCS HO cases, but not BCCH carrier!
INTEGER
Phase 2
TSPX_TCHHSubA
TDMA offset of half rate subchannel
BITSTRING[1]
Phase 2
TSPX_TCHHSubDef
TDMA offset of default half rate subchannel
BITSTRING[1]
Phase 2
TSPX_TMSI
TMSI of the MS used in test
OCTETSTRING[4]
Phase 2
TSPX_TMSI1
another TMSI used in test which shall differ from TSPX_TMSI,
TSPX_TMSI + '01'O
TSPX_TMSI + '02'O
TSPX_TMSI + '03'O
OCTETSTRING[4]
Phase 2
TSPX_k
timing of cell A before cell B k bit periods for TC_26_6_5_1_?, TC_26_6_5_2_?, TC_26_6_5_4_?, TC_26_6_5_3_?.
INTEGER
Phase 2
TSPX_y
timing advance for TC_26_6_5_4_?, TC_26_6_5_3_? TC_26_6_5_5_?,. the values of TSPX_k (or TSPX_k1) and TSPX_y shall be 0 < (2*TSPX_k + TSPX_y) MOD 256 < 60.
INTEGER
Phase 2
TSPX_k1
timing of cell A before cell B k bit periods for TC_26_6_5_5
INTEGER
Phase 2
TSPX_k2
timing of cell A before cell B k bit periods for TC_26_6_5_6
INTEGER
Phase 2
TSPX_y2
timing advance for TC_26_6_5_6, value range : 11 - 62.
INTEGER
Phase 2
TSPX_k3
timing of cell A before cell B k bit periods for TC_26_6_5_7
INTEGER
Phase 2
TSPX_y3
timing advance for TC_26_6_5_7
INTEGER
Phase 2
TSPX_nPara
the n'th ChReq for TC_26_6_1_2, shall be choose to [1..8], MAXRETRANS for TC_26_6_1_2 is 7 (See 11.10 for more explaination).
INTEGER
Phase 2
TSPX_kPara
the k'th ChReq for TC_26_6_1_2 (range 4…8)
INTEGER
Phase 2
TSPX_rPara
the r'th ChReq for TC_26_6_1_2 (range 4…8)
INTEGER
Phase 2
TSPX_i1Para
for TC_26_1_2(TSPX_nPara-3) < TSPX_i1Para <= TSPX_nPara
INTEGER
Phase 2
TSPX_i2Para
for TC_26_1_2
0 < TSPX_i2Para <= (TSPX_kPara-3)
INTEGER
Phase 2
TSPX_i3Para
for TC_26_1_2(TSPX_rPara-3) < TSPX_i3Para <= TSPX_rPara
INTEGER
Phase 2
TSPX_n1Para
the n'th ChReq for TC_26_6_1_3 (range 1…8)
INTEGER
Phase 2
TSPX_i4Para
for TC_26_6_1_3 (TSPX_n1Para-3) < TSPX_i4Para <= TSPX_n1Para
INTEGER
Phase 2
TSPX_xPara
t3122 for TC_26_6_1_3 (range 5…255)
INTEGER
Phase 2
TSPX_AGBLKS1
BS-AG-BLKS-RES for TC_26_6_2_3_1, TC_26_6_2_1_1
INTEGER
Phase 2
TSPX_PAMFRMS1
BS-PA-MFRMS for TC_26_6_2_3_1 (shall not be set to 9), TC_26_6_2_1_1
INTEGER
Phase 2
TSPX_CcchConf1
CCCH configuration for TC_26_6_2_3_1, TC_26_6_2_1_1
BITSTRING[3]
Phase 2
TSPX_PgSubch
paging subchannel for TC_26_6_2_3_1
INTEGER
Phase 2
TSPX_AGBLKS2
BS-AG-BLKS-RES for TC_26_6_2_3_2 (range 0…2), TC_26_6_2_1_2
INTEGER
Phase 2
TSPX_PAMFRMS2
BS-PA-MFRMS for TC_26_6_2_3_2, TC_26_6_2_1_2
INTEGER
Phase 2
TSPX_CcchConf2
CCCH configuration for TC_26_6_2_3_2, TC_26_6_2_1_2
BITSTRING[3]
Phase 2
TSPX_AGBLKS3
BS-AG-BLKS-RES for TC_26_6_2_4, TC_26_6_2_2, TC_26_6_2_1_3
INTEGER
Phase 2
TSPX_PAMFRMS3
BS-PA-MFRMS for TC_26_6_2_4, TC_26_6_2_2, TC_26_6_2_1_3
INTEGER
Phase 2
TSPX_CcchConf3
CCCH configuration for TC_26_6_2_4, TC_26_6_2_2, TC_26_6_2_1_3
BITSTRING[3]
Phase 2
TSPX_AGBLKS4
BS-AG-BLKS-RES for TC_26_6_2_5
INTEGER
Phase 2
TSPX_PAMFRMS4
BS-PA-MFRMS for TC_26_6_2_5
INTEGER
Phase 2
TSPX_CcchConf4
CCCH configuration for TC_26_6_2_5 (shall be in the set ('010', '100', '110'))
BITSTRING[3]
Phase 2
TSPX_Chtp1
channel type and TDMA offset for TC_26_6_13_1, any value supported by the MS
BITSTRING[5]
Phase 2
TSPX_ChMod1
channel mode for TC_26_6_13_1, any value for the channel type of TSPX_Chtp1
BITSTRING[8]
Phase 2
TSPX_Maio1
Mobile allocation index offset hopping parameter for TC_26_6_13_1, its value between 0 and (the number of frequencies) ‑1, which is defined in TSPX_Ma1, default : 2
INTEGER
Phase 2
TSPX_Ma1
mobile allocation (GSM 04.08 10.5.2.21) for TC_26_6_13_1, its value shall indicate number of frequencies between 1 and 17. default : '010101'O
OCTETSTRING[3]
Phase 2
TSPX_Hsn1
hopping sequence number for TC_26_6_13_1. default: 1
INTEGER
Phase 2
TSPX_Maio2
Mobile allocation index offset hopping parameter for TC_26_6_13_1, its value between 0 and (the number of frequencies) ‑1, which is defined in TSPX_Ma2, default : 8
INTEGER
Phase 2
TSPX_Ma2
mobile allocation for TC_26_6_13_1, its value shall indicate number of frequencies between 1 and 17. default :'01362A5'O
OCTETSTRING[3]
Phase 2
TSPX_Hsn2
hopping sequence number for TC_26_6_13_1, default : 6
INTEGER
Phase 2
TSPX_Maio3
Mobile allocation index offset hopping parameter for TC_26_6_13_1, its value between 0 and (the number of frequencies) ‑1, which is defined in TSPX_Ma3, default : 14
INTEGER
Phase 2
TSPX_Ma3
mobile allocation for TC_26_6_13_1, its value shall indicate number of frequencies between 1 and 17. default :'01FFFA'O
OCTETSTRING[3]
Phase 2
TSPX_Hsn3
hopping sequence number for TC_26_6_13_1, default : 0
INTEGER
Phase 2
TSPX_Chtp2
channel type for TC_26_6_13_2, any value supported by the MS
BITSTRING[5]
Phase 2
TSPX_ChMod2
channel mode for TC_26_6_13_2
BITSTRING[8]
Phase 2
TSPX_Maio4
Mobile allocation index offset hopping parameter for TC_26_6_13_2, its value between 0 and (the number of frequencies) ‑1, which is defined in TSPX_Ma4, default : 3
INTEGER
Phase 2
TSPX_Ma4
mobile allocation for TC_26_6_13_2, its value shall indicate number of frequencies between 1 and 17. default : '001141'O
OCTETSTRING[3]
Phase 2
TSPX_Hsn4
hopping sequence number for TC_26_6_13_2, default : 0
INTEGER
Phase 2
TSPX_Maio5
Mobile allocation index offset hopping parameter for TC_26_6_13_2, its value between 0 and (the number of frequencies) ‑1, which is defined in TSPX_Ma5, default : 9
INTEGER
Phase 2
TSPX_Ma5
mobile allocation for TC_26_6_13_2, its value shall indicate number of frequencies between 1 and 17. default : '01ABCB'O
OCTETSTRING[3]
Phase 2
TSPX_Hsn5
hopping sequence number for TC_26_6_13_2, default : 16
INTEGER
Phase 2
TSPX_Chtp3
channel type for TC_26_6_13_3, any value supported by the MS
BITSTRING[5]
Phase 2
TSPX_Maio6
Mobile allocation index offset hopping parameter for TC_26_6_13_3, its value between 0 and (the number of frequencies) ‑1, which is defined in TSPX_Ma6, default : 4
INTEGER
Phase 2
TSPX_Ma6
mobile allocation for TC_26_6_13_3, its value shall indicate number of frequencies between 1 and 17. default :'006248'O
OCTETSTRING[3]
Phase 2
TSPX_Hsn6
hopping sequence number for TC_26_6_13_3, default : 4
INTEGER
Phase 2
TSPX_Maio7
Mobile allocation index offset hopping parameter for TC_26_6_13_3, its value between 0 and (the number of frequencies) ‑1, which is defined in TSPX_Ma7, default : 10
INTEGER
Phase 2
TSPX_Ma7
mobile allocation for TC_26_6_13_3, its value shall indicate number of frequencies between 2 and 17. default : '009AFB'O
OCTETSTRING[3]
Phase 2
TSPX_Chtp4
channel type for TC_26_6_13_3, any value supported by the MS
BITSTRING[5]
Phase 2
TSPX_Maio8
Mobile allocation index offset hopping parameter for TC_26_6_13_3, its value between 0 and (the number of frequencies) ‑1, which is defined in TSPX_Ma8, default : 1
INTEGER
Phase 2
TSPX_Ma8
mobile allocation for TC_26_6_13_3, its value shall indicate number of frequencies between 2 and 17. default : '002800'O
OCTETSTRING[3]
Phase 2
TSPX_Hsn8
hopping sequence number for TC_26_6_13_3, default : 40
INTEGER
Phase 2
TSPX_Maio9
Mobile allocation index offset hopping parameter for TC_26_6_13_3, its value between 0 and (the number of frequencies) ‑1, which is defined in TSPX_Ma9, default : 15
INTEGER
Phase 2
TSPX_Ma9
mobile allocation for TC_26_6_13_3, its value shall indicate number of frequencies between 2 and 17. default : '01FFFB'O
OCTETSTRING[3]
Phase 2
TSPX_Hsn9
hopping sequence number for TC_26_6_13_3, default : 8
INTEGER
Phase 2
TSPX_Chtp5
SDDCH8 subchannel immediately assigned in TC_26_6_13_4
BITSTRING[5]
Phase 2
TSPX_Maio10
Mobile allocation index offset hopping parameter for TC_26_6_13_4, its value between 0 and (the number of frequencies) ‑1, which is defined in TSPX_Ma10, default : 5
INTEGER
Phase 2
TSPX_Ma10
mobile allocation for TC_26_6_13_4, its value shall indicate number of frequencies between 1 and 17. default : '01D082'O
OCTETSTRING[3]
Phase 2
TSPX_Hsn10
hopping sequence number for TC_26_6_13_4, default: 0
INTEGER
Phase 2
TSPX_Maio11
Mobile allocation index offset hopping parameter for TC_26_6_13_4, its value between 0 and (the number of frequencies) ‑1, which is defined in TSPX_Ma11, default : 11
INTEGER
Phase 2
TSPX_Ma11
mobile allocation for TC_26_6_13_4, its value shall indicate number of frequencies between 2 and 17. default : '00CFF3'O
OCTETSTRING[3]
Phase 2
TSPX_Chtp6
channel type of a non existing channel in the Assignment Command for TC_26_6_13_4
BITSTRING[5]
Phase 2
TSPX_Maio12
Mobile allocation index offset hopping parameter for TC_26_6_13_4, its value between 0 and (the number of frequencies) ‑1, which is defined in TSPX_Ma12, default : 1
INTEGER
Phase 2
TSPX_Ma12
mobile allocation for TC_26_6_13_4, its value shall indicate number of frequencies between 1 and 17. default : '010100'O
OCTETSTRING[3]
Phase 2
TSPX_Hsn12
hopping sequence number for TC_26_6_13_4, default : 39
INTEGER
Phase 2
TSPX_Maio13
Mobile allocation index offset hopping parameter for TC_26_6_13_4, its value between 0 and (the number of frequencies) ‑1, which is defined in TSPX_Ma13, default : 6
INTEGER
Phase 2
TSPX_Ma13
mobile allocation for TC_26_6_13_4, its value shall indicate number of frequencies between 1 and 17. default : '00E690'O
OCTETSTRING[3]
Phase 2
TSPX_Hsn13
hopping sequence number for TC_26_6_13_4, default: 42
INTEGER
Phase 2
TSPX_Chtp7
channel type for TC_26_6_13_5
BITSTRING[5]
Phase 2
TSPX_ChMod4
channel mode for TC_26_6_13_5
BITSTRING[8]
Phase 2
TSPX_Maio14
Mobile allocation index offset hopping parameter for TC_26_6_13_5, its value between 0 and (the number of frequencies) ‑1, which is defined in TSPX_Ma14, default : 4
INTEGER
Phase 2
TSPX_Ma14
mobile allocation for TC_26_6_13_5, its value shall indicate number of frequencies between 1 and 17. default : '004A28'O
OCTETSTRING[3]
Phase 2
TSPX_Hsn14
hopping sequence number for TC_26_6_13_5, default : 50
INTEGER
Phase 2
TSPX_Maio15
Mobile allocation index offset hopping parameter for TC_26_6_13_5, its value between 0 and (the number of frequencies) ‑1, which is defined in TSPX_Ma15, default : 12
INTEGER
Phase 2
TSPX_Ma15
mobile allocation for TC_26_6_13_5, its value shall indicate number of frequencies between 1 and 16. default : '00FF79'O
OCTETSTRING[3]
Phase 2
TSPX_Hsn15
hopping sequence number for TC_26_6_13_5, default : 33
INTEGER
Phase 2
TSPX_Maio16
Mobile allocation index offset hopping parameter for TC_26_6_13_5, its value between 0 and (the number of frequencies) ‑1, which is defined in TSPX_Ma16, default : 2
INTEGER
Phase 2
TSPX_Ma16
mobile allocation for TC_26_6_13_5, its value shall indicate number of frequencies between 1 and 16. default : '001110'O
OCTETSTRING[3]
Phase 2
TSPX_Hsn16
hopping sequence number for TC_26_6_13_5, default : 21
INTEGER
Phase 2
TSPX_Chtp8
channel type for TC_26_6_13_6
BITSTRING[5]
Phase 2
TSPX_ChMod5
channel mode for TC_26_6_13_6
BITSTRING[8]
Phase 2
TSPX_Maio17
Mobile allocation index offset hopping parameter for TC_26_6_13_6, its value between 0 and (the number of frequencies) ‑1, which is defined in TSPX_Ma17, default : 7
INTEGER
Phase 2
TSPX_Ma17
mobile allocation for TC_26_6_13_6, its value shall indicate number of frequencies between 1 and 17. default : '00E6A1'O
OCTETSTRING[3]
Phase 2
TSPX_Hsn17
hopping sequence number for TC_26_6_13_6, default : 22
INTEGER
Phase 2
TSPX_Maio18
Mobile allocation index offset hopping parameter for TC_26_6_13_6, its value between 0 and (the number of frequencies) ‑1, which is defined in TSPX_Ma18, default : 13
INTEGER
Phase 2
TSPX_Ma18
mobile allocation for TC_26_6_13_6, its value shall indicate number of frequencies between 1 and 16. default : '00FFF9'O
OCTETSTRING[3]
Phase 2
TSPX_Hsn18
hopping sequence number for TC_26_6_13_6, default : 9
INTEGER
Phase 2
TSPX_Maio19
Mobile allocation index offset hopping parameter for TC_26_6_13_6, its value between 0 and (the number of frequencies) ‑1, which is defined in TSPX_Ma19, default : 3
INTEGER
Phase 2
TSPX_Ma19
mobile allocation for TC_26_6_13_6, its value shall indicate number of frequencies between 1 and 16. default : '001111'O
OCTETSTRING[3]
Phase 2
TSPX_Hsn19
hopping sequence number for TC_26_6_13_6, default : 44
INTEGER
Phase 2
TSPX_Chtp9
channel type for TC_26_6_13_7
BITSTRING[5]
Phase 2
TSPX_ChMod6
channel mode for TC_26_6_13_7
BITSTRING[8]
Phase 2
TSPX_Maio20
Mobile allocation index offset hopping parameter for TC_26_6_13_7, its value between 0 and (the number of frequencies) ‑1, which is defined in TSPX_Ma20, default : 8
INTEGER
Phase 2
TSPX_Ma20
mobile allocation for TC_26_6_13_7, its value shall indicate number of frequencies between 1 and 17. default : '016699'O
OCTETSTRING[3]
Phase 2
TSPX_Hsn20
hopping sequence number for TC_26_6_13_7, default : 30
INTEGER
Phase 2
TSPX_Maio21
Mobile allocation index offset hopping parameter for TC_26_6_13_7, its value between 0 and (the number of frequencies) ‑1, which is defined in TSPX_Ma21, default : 14
INTEGER
Phase 2
TSPX_Ma21
mobile allocation for TC_26_6_13_7, its value shall indicate number of frequencies between 1 and 17. default : '01FEFB'O
OCTETSTRING[3]
Phase 2
TSPX_Chtp10
channel type for TC_26_6_13_7
BITSTRING[5]
Phase 2
TSPX_Maio22
Mobile allocation index offset hopping parameter for TC_26_6_13_7, its value between 0 and (the number of frequencies) ‑1, which is defined in TSPX_Ma22, default : 4
INTEGER
Phase 2
TSPX_Ma22
mobile allocation for TC_26_6_13_7, its value shall indicate number of frequencies between 1 and 16. default : '006241'O
OCTETSTRING[3]
Phase 2
TSPX_Hsn22
hopping sequence number for TC_26_6_13_7, default : 11
INTEGER
Phase 2
TSPX_Maio23
Mobile allocation index offset hopping parameter for TC_26_6_13_7, its value between 0 and (the number of frequencies) ‑1, which is defined in TSPX_Ma23, default : 11
INTEGER
Phase 2
TSPX_Ma23
mobile allocation for TC_26_6_13_7, its value shall indicate number of frequencies between 1 and 16. default : '00FF1B'O
OCTETSTRING[3]
Phase 2
TSPX_Hsn23
hopping sequence number for TC_26_6_13_7, default : 60
INTEGER
Phase 2
TSPX_Chtp11
SDCCH8 subchannel immediately assigned, TC_26_6_13_8
BITSTRING[5]
Phase 2
TSPX_ChMod7
channel mode for TC_26_6_13_8
BITSTRING[8]
Phase 2
TSPX_Maio24
Mobile allocation index offset hopping parameter for TC_26_6_13_8, its value between 0 and (the number of frequencies) ‑1, which is defined in TSPX_Ma24, default : 9
INTEGER
Phase 2
TSPX_Ma24
mobile allocation for TC_26_6_13_8, its value shall indicate number of frequencies between 1 and 17. default : '00E6E9'O
OCTETSTRING[3]
Phase 2
TSPX_Hsn24
hopping sequence number for TC_26_6_13_8, default : 7
INTEGER
Phase 2
TSPX_Maio25
Mobile allocation index offset hopping parameter for TC_26_6_13_8, its value between 0 and (the number of frequencies) ‑1, which is defined in TSPX_Ma25, default : 15
INTEGER
Phase 2
TSPX_Ma25
mobile allocation for TC_26_6_13_8, its value shall indicate number of frequencies between 1 and 17. default : '01FFFB'O
OCTETSTRING[3]
Phase 2
TSPX_Chtp12
channel type of a non-existing channel in the Assignment Command for TC_26_6_13_8
BITSTRING[5]
Phase 2
TSPX_Maio26
Mobile allocation index offset hopping parameter for TC_26_6_13_8, its value between 0 and (the number of frequencies) ‑1, which is defined in TSPX_Ma26, default : 5
INTEGER
Phase 2
TSPX_Ma26
mobile allocation for TC_26_6_13_8, its value shall indicate number of frequencies between 1 and 16. default : '009168'O
OCTETSTRING[3]
Phase 2
TSPX_Hsn26
hopping sequence number for TC_26_6_13_8, default : 9
INTEGER
Phase 2
TSPX_Maio27
Mobile allocation index offset hopping parameter for TC_26_6_13_8, its value between 0 and (the number of frequencies) ‑1, which is defined in TSPX_Ma27, default : 1
INTEGER
Phase 2
TSPX_Ma27
mobile allocation for TC_26_6_13_8, its value shall indicate number of frequencies between 1 and 16. default : '004080'O
OCTETSTRING[3]
Phase 2
TSPX_Hsn27
hopping sequence number for TC_26_6_13_8, default : 38
INTEGER
Phase 2
TSPX_Chtp13
channel type for TC_26_6_13_9
BITSTRING[5]
Phase 2
TSPX_Tm3
Timer for TC_26_6_13_9, value between 60 ‑100
INTEGER
Phase 2
TSPX_Maio28
Mobile allocation index offset hopping parameter for TC_26_6_13_9, its value between 0 and (the number of frequencies) ‑1, which is defined in TSPX_Ma28, default : 10
INTEGER
Phase 2
TSPX_Ma28
mobile allocation for TC_26_6_13_9, its value shall indicate number of frequencies between 1 and 17. default : '00EE7A'O
OCTETSTRING[3]
Phase 2
TSPX_Hsn28
hopping sequence number for TC_26_6_13_9, default : 11
INTEGER
Phase 2
TSPX_Maio29
Mobile allocation index offset hopping parameter for TC_26_6_13_9, its value between 0 and (the number of frequencies) ‑1, which is defined in TSPX_Ma29, default : 6
INTEGER
Phase 2
TSPX_Ma29
mobile allocation for TC_26_6_13_9, its value shall indicate number of frequencies between 1 and 17. default : '00F070'O
OCTETSTRING[3]
Phase 2
TSPX_Chtp14
channel type for TC_26_6_13_10
BITSTRING[5]
Phase 2
TSPX_Maio30
Mobile allocation index offset hopping parameter for TC_26_6_13_10, its value between 0 and (the number of frequencies) ‑1, which is defined in TSPX_Ma30, default : 11
INTEGER
Phase 2
TSPX_Ma30
mobile allocation for TC_26_6_13_10, its value shall indicate number of frequencies between 1 and 17. default : '017F69'O
OCTETSTRING[3]
Phase 2
TSPX_Hsn30
hopping sequence number for TC_26_6_13_10, default : 62
INTEGER
Phase 2
TSPX_Maio31
Mobile allocation index offset hopping parameter for TC_26_6_13_10, its value between 0 and (the number of frequencies) ‑1, which is defined in TSPX_Ma31, default : 1
INTEGER
Phase 2
TSPX_Ma31
mobile allocation for TC_26_6_13_10, its value shall indicate number of frequencies between 1 and 17. default : '000101'O
OCTETSTRING[3]
Phase 2
TSPX_MOBscSvcA
any supported MO basic service
"C_Telephony", "C_EmgCallSRV", "C_AltSpchG3", "C_AutoG3", "C_300cda", "C_1200cda", "C_120075cda", "C_2400cda", "C_4800cda", "C_2400cds", "C_4800cds", "C_PAD300", "C_PAD1200", "C_PAD120075", "C_PAD2400", "C_PAD4800", "C_PAD9600", "C_Pkt2400", "C_Pkt4800", "C_Pkt9600", "C_AltSpchData", "C_SpchData"
Phase 2
TSPX_MOBscSvcB
any supported MO basic service
"C_Telephony", "C_EmgCallSRV", "C_AltSpchG3", "C_AutoG3", "C_300cda", "C_1200cda", "C_120075cda", "C_2400cda", "C_4800cda", "C_2400cds", "C_4800cds", "C_PAD300", "C_PAD1200", "C_PAD120075", "C_PAD2400", "C_PAD4800", "C_PAD9600", "C_Pkt2400", "C_Pkt4800", "C_Pkt9600", "C_AltSpchData", "C_SpchData"
Phase 2
TSPX_MOBscSvcC
any supported MO basic service
"C_Telephony", "C_EmgCallSRV", "C_AltSpchG3", "C_AutoG3", "C_300cda", "C_1200cda", "C_120075cda", "C_2400cda", "C_4800cda", "C_2400cds", "C_4800cds", "C_PAD300", "C_PAD1200", "C_PAD120075", "C_PAD2400", "C_PAD4800", "C_PAD9600", "C_Pkt2400", "C_Pkt4800", "C_Pkt9600", "C_AltSpchData", "C_SpchData"
Phase 2
TSPX_MOBscSvcD
any supported MO basic service
"C_Telephony", "C_EmgCallSRV", "C_AltSpchG3", "C_AutoG3", "C_300cda", "C_1200cda", "C_120075cda", "C_2400cda", "C_4800cda", "C_2400cds", "C_4800cds", "C_PAD300", "C_PAD1200", "C_PAD120075", "C_PAD2400", "C_PAD4800", "C_PAD9600", "C_Pkt2400", "C_Pkt4800", "C_Pkt9600", "C_AltSpchData", "C_SpchData"
Phase 2
TSPX_MOBscSvcE
any supported MO basic service
"C_Telephony", "C_EmgCallSRV", "C_AltSpchG3", "C_AutoG3", "C_300cda", "C_1200cda", "C_120075cda", "C_2400cda", "C_4800cda", "C_2400cds", "C_4800cds", "C_PAD300", "C_PAD1200", "C_PAD120075", "C_PAD2400", "C_PAD4800", "C_PAD9600", "C_Pkt2400", "C_Pkt4800", "C_Pkt9600", "C_AltSpchData", "C_SpchData"
Phase 2
TSPX_MOBscSvcF
any supported MO basic service
"C_Telephony", "C_EmgCallSRV", "C_AltSpchG3", "C_AutoG3", "C_300cda", "C_1200cda", "C_120075cda", "C_2400cda", "C_4800cda", "C_2400cds", "C_4800cds", "C_PAD300", "C_PAD1200", "C_PAD120075", "C_PAD2400", "C_PAD4800", "C_PAD9600", "C_Pkt2400", "C_Pkt4800", "C_Pkt9600", "C_AltSpchData", "C_SpchData"
Phase 2
TSPX_MOBscSvcG
any supported MO basic service
"C_Telephony", "C_EmgCallSRV", "C_AltSpchG3", "C_AutoG3", "C_300cda", "C_1200cda", "C_120075cda", "C_2400cda", "C_4800cda", "C_2400cds", "C_4800cds", "C_PAD300", "C_PAD1200", "C_PAD120075", "C_PAD2400", "C_PAD4800", "C_PAD9600", "C_Pkt2400", "C_Pkt4800", "C_Pkt9600", "C_AltSpchData", "C_SpchData"
Phase 2
TSPX_MOBscSvcH
any supported MO basic service
"C_Telephony", "C_EmgCallSRV", "C_AltSpchG3", "C_AutoG3", "C_300cda", "C_1200cda", "C_120075cda", "C_2400cda", "C_4800cda", "C_2400cds", "C_4800cds", "C_PAD300", "C_PAD1200", "C_PAD120075", "C_PAD2400", "C_PAD4800", "C_PAD9600", "C_Pkt2400", "C_Pkt4800", "C_Pkt9600", "C_AltSpchData", "C_SpchData"
Phase 2
TSPX_MOBscSvcI
any supported MO basic service
"C_Telephony", "C_EmgCallSRV", "C_AltSpchG3", "C_AutoG3", "C_300cda", "C_1200cda", "C_120075cda", "C_2400cda", "C_4800cda", "C_2400cds", "C_4800cds", "C_PAD300", "C_PAD1200", "C_PAD120075", "C_PAD2400", "C_PAD4800", "C_PAD9600", "C_Pkt2400", "C_Pkt4800", "C_Pkt9600", "C_AltSpchData", "C_SpchData"
Phase 2
TSPX_MOBscSvcJ
any supported MO basic service
"C_Telephony", "C_EmgCallSRV", "C_AltSpchG3", "C_AutoG3", "C_300cda", "C_1200cda", "C_120075cda", "C_2400cda", "C_4800cda", "C_2400cds", "C_4800cds", "C_PAD300", "C_PAD1200", "C_PAD120075", "C_PAD2400", "C_PAD4800", "C_PAD9600", "C_Pkt2400", "C_Pkt4800", "C_Pkt9600", "C_AltSpchData", "C_SpchData"
Phase 2
TSPX_MT_DualModSvc
any supported MT dual mode service
"C_Telephony", "C_EmgCallSRV", "C_AltSpchG3", "C_AutoG3", "C_300cda", "C_1200cda", "C_120075cda", "C_2400cda", "C_4800cda", "C_2400cds", "C_4800cds", "C_PAD300", "C_PAD1200", "C_PAD120075", "C_PAD2400", "C_PAD4800", "C_PAD9600", "C_Pkt2400", "C_Pkt4800", "C_Pkt9600", "C_AltSpchData", "C_SpchData"
Phase 2
TSPX_MT_NonSptSvc
any not supported MT basic service
"C_Telephony", "C_EmgCallSRV", "C_AltSpchG3", "C_AutoG3", "C_300cda", "C_1200cda", "C_120075cda", "C_2400cda", "C_4800cda", "C_2400cds", "C_4800cds", "C_PAD300", "C_PAD1200", "C_PAD120075", "C_PAD2400", "C_PAD4800", "C_PAD9600", "C_Pkt2400", "C_Pkt4800", "C_Pkt9600", "C_AltSpchData", "C_SpchData"
Phase 2
TSPX_MTBscSvcA
any supported MT basic service
"C_Telephony", "C_EmgCallSRV", "C_AltSpchG3", "C_AutoG3", "C_300cda", "C_1200cda", "C_120075cda", "C_2400cda", "C_4800cda", "C_2400cds", "C_4800cds", "C_PAD300", "C_PAD1200", "C_PAD120075", "C_PAD2400", "C_PAD4800", "C_PAD9600", "C_Pkt2400", "C_Pkt4800", "C_Pkt9600", "C_AltSpchData", "C_SpchData"
Phase 2
TSPX_MTBscSvcB
any supported MT basic service
"C_Telephony", "C_EmgCallSRV", "C_AltSpchG3", "C_AutoG3", "C_300cda", "C_1200cda", "C_120075cda", "C_2400cda", "C_4800cda", "C_2400cds", "C_4800cds", "C_PAD300", "C_PAD1200", "C_PAD120075", "C_PAD2400", "C_PAD4800", "C_PAD9600", "C_Pkt2400", "C_Pkt4800", "C_Pkt9600", "C_AltSpchData", "C_SpchData"
Phase 2
TSPX_MTBscSvcC
any supported MT basic service
"C_Telephony", "C_EmgCallSRV", "C_AltSpchG3", "C_AutoG3", "C_300cda", "C_1200cda", "C_120075cda", "C_2400cda", "C_4800cda", "C_2400cds", "C_4800cds", "C_PAD300", "C_PAD1200", "C_PAD120075", "C_PAD2400", "C_PAD4800", "C_PAD9600", "C_Pkt2400", "C_Pkt4800", "C_Pkt9600", "C_AltSpchData", "C_SpchData"
Phase 2
TSPX_MTBscSvcD
any supported MT basic service
"C_Telephony", "C_EmgCallSRV", "C_AltSpchG3", "C_AutoG3", "C_300cda", "C_1200cda", "C_120075cda", "C_2400cda", "C_4800cda", "C_2400cds", "C_4800cds", "C_PAD300", "C_PAD1200", "C_PAD120075", "C_PAD2400", "C_PAD4800", "C_PAD9600", "C_Pkt2400", "C_Pkt4800", "C_Pkt9600", "C_AltSpchData", "C_SpchData"
Phase 2
TSPX_MTBscSvcE
any supported MT basic service
"C_Telephony", "C_EmgCallSRV", "C_AltSpchG3", "C_AutoG3", "C_300cda", "C_1200cda", "C_120075cda", "C_2400cda", "C_4800cda", "C_2400cds", "C_4800cds", "C_PAD300", "C_PAD1200", "C_PAD120075", "C_PAD2400", "C_PAD4800", "C_PAD9600", "C_Pkt2400", "C_Pkt4800", "C_Pkt9600", "C_AltSpchData", "C_SpchData"
Phase 2
TSPX_MTBscSvcF
any supported MT basic service
"C_Telephony", "C_EmgCallSRV", "C_AltSpchG3", "C_AutoG3", "C_300cda", "C_1200cda", "C_120075cda", "C_2400cda", "C_4800cda", "C_2400cds", "C_4800cds", "C_PAD300", "C_PAD1200", "C_PAD120075", "C_PAD2400", "C_PAD4800", "C_PAD9600", "C_Pkt2400", "C_Pkt4800", "C_Pkt9600", "C_AltSpchData", "C_SpchData"
Phase 2
TSPX_MTBscSvcG
any supported MT basic service
"C_Telephony", "C_EmgCallSRV", "C_AltSpchG3", "C_AutoG3", "C_300cda", "C_1200cda", "C_120075cda", "C_2400cda", "C_4800cda", "C_2400cds", "C_4800cds", "C_PAD300", "C_PAD1200", "C_PAD120075", "C_PAD2400", "C_PAD4800", "C_PAD9600", "C_Pkt2400", "C_Pkt4800", "C_Pkt9600", "C_AltSpchData", "C_SpchData"
Phase 2
TSPX_MTBscSvcH
any supported MT basic service
"C_Telephony", "C_EmgCallSRV", "C_AltSpchG3", "C_AutoG3", "C_300cda", "C_1200cda", "C_120075cda", "C_2400cda", "C_4800cda", "C_2400cds", "C_4800cds", "C_PAD300", "C_PAD1200", "C_PAD120075", "C_PAD2400", "C_PAD4800", "C_PAD9600", "C_Pkt2400", "C_Pkt4800", "C_Pkt9600", "C_AltSpchData", "C_SpchData"
Phase 2
TSPX_MTBscSvcI
any supported MT basic service
"C_Telephony", "C_EmgCallSRV", "C_AltSpchG3", "C_AutoG3", "C_300cda", "C_1200cda", "C_120075cda", "C_2400cda", "C_4800cda", "C_2400cds", "C_4800cds", "C_PAD300", "C_PAD1200", "C_PAD120075", "C_PAD2400", "C_PAD4800", "C_PAD9600", "C_Pkt2400", "C_Pkt4800", "C_Pkt9600", "C_AltSpchData", "C_SpchData"
Phase 2
TSPX_MTBscSvcJ
any supported MT basic service
"C_Telephony", "C_EmgCallSRV", "C_AltSpchG3", "C_AutoG3", "C_300cda", "C_1200cda", "C_120075cda", "C_2400cda", "C_4800cda", "C_2400cds", "C_4800cds", "C_PAD300", "C_PAD1200", "C_PAD120075", "C_PAD2400", "C_PAD4800", "C_PAD9600", "C_Pkt2400", "C_Pkt4800", "C_Pkt9600", "C_AltSpchData", "C_SpchData"
Phase 2
TSPX_MTNIC_BscSvcA
any supported MT basic service without immediate connection
"C_Telephony", "C_EmgCallSRV", "C_AltSpchG3", "C_AutoG3", "C_300cda", "C_1200cda", "C_120075cda", "C_2400cda", "C_4800cda", "C_2400cds", "C_4800cds", "C_PAD300", "C_PAD1200", "C_PAD120075", "C_PAD2400", "C_PAD4800", "C_PAD9600", "C_Pkt2400", "C_Pkt4800", "C_Pkt9600", "C_AltSpchData", "C_SpchData"
Phase 2
TSPX_MTNIC_BscSvcB
any supported MT basic service without immediate connection
"C_Telephony", "C_EmgCallSRV", "C_AltSpchG3", "C_AutoG3", "C_300cda", "C_1200cda", "C_120075cda", "C_2400cda", "C_4800cda", "C_2400cds", "C_4800cds", "C_PAD300", "C_PAD1200", "C_PAD120075", "C_PAD2400", "C_PAD4800", "C_PAD9600", "C_Pkt2400", "C_Pkt4800", "C_Pkt9600", "C_AltSpchData", "C_SpchData"
Phase 2
TSPX_MTNIC_BscSvcC
any supported MT basic service without immediate connection
"C_Telephony", "C_EmgCallSRV", "C_AltSpchG3", "C_AutoG3", "C_300cda", "C_1200cda", "C_120075cda", "C_2400cda", "C_4800cda", "C_2400cds", "C_4800cds", "C_PAD300", "C_PAD1200", "C_PAD120075", "C_PAD2400", "C_PAD4800", "C_PAD9600", "C_Pkt2400", "C_Pkt4800", "C_Pkt9600", "C_AltSpchData", "C_SpchData"
Phase 2
TSPX_MTNIC_BscSvcD
any supported MT basic service without immediate connection
"C_Telephony", "C_EmgCallSRV", "C_AltSpchG3", "C_AutoG3", "C_300cda", "C_1200cda", "C_120075cda", "C_2400cda", "C_4800cda", "C_2400cds", "C_4800cds", "C_PAD300", "C_PAD1200", "C_PAD120075", "C_PAD2400", "C_PAD4800", "C_PAD9600", "C_Pkt2400", "C_Pkt4800", "C_Pkt9600", "C_AltSpchData", "C_SpchData"
Phase 2
TSPX_MTNIC_BscSvcE
any supported MT basic service without immediate connection
"C_Telephony", "C_EmgCallSRV", "C_AltSpchG3", "C_AutoG3", "C_300cda", "C_1200cda", "C_120075cda", "C_2400cda", "C_4800cda", "C_2400cds", "C_4800cds", "C_PAD300", "C_PAD1200", "C_PAD120075", "C_PAD2400", "C_PAD4800", "C_PAD9600", "C_Pkt2400", "C_Pkt4800", "C_Pkt9600", "C_AltSpchData", "C_SpchData"
Phase 2
TSPX_MTNIC_BscSvcF
any supported MT basic service without immediate connection
"C_Telephony", "C_EmgCallSRV", "C_AltSpchG3", "C_AutoG3", "C_300cda", "C_1200cda", "C_120075cda", "C_2400cda", "C_4800cda", "C_2400cds", "C_4800cds", "C_PAD300", "C_PAD1200", "C_PAD120075", "C_PAD2400", "C_PAD4800", "C_PAD9600", "C_Pkt2400", "C_Pkt4800", "C_Pkt9600", "C_AltSpchData", "C_SpchData"
Phase 2
TSPX_MTNIC_BscSvcG
any supported MT basic service without immediate connection
"C_Telephony", "C_EmgCallSRV", "C_AltSpchG3", "C_AutoG3", "C_300cda", "C_1200cda", "C_120075cda", "C_2400cda", "C_4800cda", "C_2400cds", "C_4800cds", "C_PAD300", "C_PAD1200", "C_PAD120075", "C_PAD2400", "C_PAD4800", "C_PAD9600", "C_Pkt2400", "C_Pkt4800", "C_Pkt9600", "C_AltSpchData", "C_SpchData"
Phase 2
TSPX_MTNIC_BscSvcH
any supported MT basic service without immediate connection
"C_Telephony", "C_EmgCallSRV", "C_AltSpchG3", "C_AutoG3", "C_300cda", "C_1200cda", "C_120075cda", "C_2400cda", "C_4800cda", "C_2400cds", "C_4800cds", "C_PAD300", "C_PAD1200", "C_PAD120075", "C_PAD2400", "C_PAD4800", "C_PAD9600", "C_Pkt2400", "C_Pkt4800", "C_Pkt9600", "C_AltSpchData", "C_SpchData"
Phase 2
TSPX_MTNIC_BscSvcI
any supported MT basic service without immediate connection
"C_Telephony", "C_EmgCallSRV", "C_AltSpchG3", "C_AutoG3", "C_300cda", "C_1200cda", "C_120075cda", "C_2400cda", "C_4800cda", "C_2400cds", "C_4800cds", "C_PAD300", "C_PAD1200", "C_PAD120075", "C_PAD2400", "C_PAD4800", "C_PAD9600", "C_Pkt2400", "C_Pkt4800", "C_Pkt9600", "C_AltSpchData", "C_SpchData"
Phase 2
TSPX_MTNIC_BscSvcJ
any supported MT basic service without immediate connection
"C_Telephony", "C_EmgCallSRV", "C_AltSpchG3", "C_AutoG3", "C_300cda", "C_1200cda", "C_120075cda", "C_2400cda", "C_4800cda", "C_2400cds", "C_4800cds", "C_PAD300", "C_PAD1200", "C_PAD120075", "C_PAD2400", "C_PAD4800", "C_PAD9600", "C_Pkt2400", "C_Pkt4800", "C_Pkt9600", "C_AltSpchData", "C_SpchData"
Phase 2
TSPX_Telephony_Rate
channel rate for TS11 (telephony), default value : "F"
"F", "H"
Phase 2
TSPX_MOChRateA
channel rate for TSPX_MOBscSvcA, default value : "F"
"F", "H"
Phase 2
TSPX_MOChRateB
channel rate for TSPX_MOBscSvcB, default value : "F"
"F", "H"
Phase 2
TSPX_MOChRateC
channel rate for TSPX_MOBscSvcC, default value : "F"
"F", "H"
Phase 2
TSPX_MOChRateD
channel rate for TSPX_MOBscSvcD, default value : "F"
"F", "H"
Phase 2
TSPX_MOChRateE
channel rate for TSPX_MOBscSvcE, default value : "F"
"F", "H"
Phase 2
TSPX_MOChRateF
channel rate for TSPX_MOBscSvcF, default value : "F"
"F", "H"
Phase 2
TSPX_MOChRateG
channel rate for TSPX_MOBscSvcG, default value : "F"
"F", "H"
Phase 2
TSPX_MOChRateH
channel rate for TSPX_MOBscSvcH, default value : "F"
"F", "H"
Phase 2
TSPX_MOChRateI
channel rate for TSPX_MOBscSvcI, default value : "F"
"F", "H"
Phase 2
TSPX_MOChRateJ
channel rate for TSPX_MOBscSvcJ, default value : "F"
"F", "H"
Phase 2
TSPX_MTChRateA
channel rate for TSPX_MTBscSvcA, default value : "F"
"F", "H"
Phase 2
TSPX_MTChRateB
channel rate for TSPX_MTBscSvcB, default value : "F"
"F", "H"
Phase 2
TSPX_MTChRateC
channel rate for TSPX_MTBscSvcC, default value : "F"
"F", "H"
Phase 2
TSPX_MTChRateD
channel rate for TSPX_MTBscSvcD, default value : "F"
"F", "H"
Phase 2
TSPX_MTChRateE
channel rate for TSPX_MTBscSvcE, default value : "F"
"F", "H"
Phase 2
TSPX_MTChRateF
channel rate for TSPX_MTBscSvcF, default value : "F"
"F", "H"
Phase 2
TSPX_MTChRateG
channel rate for TSPX_MTBscSvcG, default value : "F"
"F", "H"
Phase 2
TSPX_MTChRateH
channel rate for TSPX_MTBscSvcH, default value : "F"
"F", "H"
Phase 2
TSPX_MTChRateI
channel rate for TSPX_MTBscSvcI, default value : "F"
"F", "H"
Phase 2
TSPX_MTChRateJ
channel rate for TSPX_MTBscSvcJ, default value : "F"
"F", "H"
Phase 2
TSPX_MTNIC_ChRateA
channel rate for TSPX_MTNIC_BscSvcA, default value : "F"
"F", "H"
Phase 2
TSPX_MTNIC_ChRateB
channel rate for TSPX_MTNIC_BscSvcB, default value : "F"
"F", "H"
Phase 2
TSPX_MTNIC_ChRateC
channel rate for TSPX_MTNIC_BscSvcC, default value : "F"
"F", "H"
Phase 2
TSPX_MTNIC_ChRateD
channel rate for TSPX_MTNIC_BscSvcD, default value : "F"
"F", "H"
Phase 2
TSPX_MTNIC_ChRateE
channel rate for TSPX_MTNIC_BscSvcE, default value : "F"
"F", "H"
Phase 2
TSPX_MTNIC_ChRateF
channel rate for TSPX_MTNIC_BscSvcF, default value : "F"
"F", "H"
Phase 2
TSPX_MTNIC_ChRateG
channel rate for TSPX_MTNIC_BscSvcG, default value : "F"
"F", "H"
Phase 2
TSPX_MTNIC_ChRateH
channel rate for TSPX_MTNIC_BscSvcH, default value : "F"
"F", "H"
Phase 2
TSPX_MTNIC_ChRateI
channel rate for TSPX_MTNIC_BscSvcI, default value : "F"
"F", "H"
Phase 2
TSPX_MTNIC_ChRateJ
channel rate for TSPX_MTNIC_BscSvcJ, default value : "F"
"F", "H"
Phase 2
TSPX_EmgCallRate
Rate for the basic service supported for MO emergency calls
"F", "H"
Phase 2
TSPX_MO_NonCallSS
any supported MO non-call releated supplementary service
"C_Telephony", "C_EmgCallSRV", "C_AltSpchG3", "C_AutoG3", "C_300cda", "C_1200cda", "C_120075cda", "C_2400cda", "C_4800cda", "C_2400cds", "C_4800cds", "C_PAD300", "C_PAD1200", "C_PAD120075", "C_PAD2400", "C_PAD4800", "C_PAD9600", "C_Pkt2400", "C_Pkt4800", "C_Pkt9600", "C_AltSpchData", "C_SpchData"
Phase 2
TSPX_MO_BscSvc_SMS
any supported MO SMS calls
"C_Telephony", "C_EmgCallSRV", "C_AltSpchG3", "C_AutoG3", "C_300cda", "C_1200cda", "C_120075cda", "C_2400cda", "C_4800cda", "C_2400cds", "C_4800cds", "C_PAD300", "C_PAD1200", "C_PAD120075", "C_PAD2400", "C_PAD4800", "C_PAD9600", "C_Pkt2400", "C_Pkt4800", "C_Pkt9600", "C_AltSpchData", "C_SpchData"
Phase 2
TSPX_MO_DualModSvc
any supported MO dual mode call
"C_Telephony", "C_EmgCallSRV", "C_AltSpchG3", "C_AutoG3", "C_300cda", "C_1200cda", "C_120075cda", "C_2400cda", "C_4800cda", "C_2400cds", "C_4800cds", "C_PAD300", "C_PAD1200", "C_PAD120075", "C_PAD2400", "C_PAD4800", "C_PAD9600", "C_Pkt2400", "C_Pkt4800", "C_Pkt9600", "C_AltSpchData", "C_SpchData"
Phase 2
TSPX_MO_DualModRate
Rate for the supported MO dual mode call in TSPX_MO_DualModSvc
"F", "H"
Phase 2
TSPX_Vcallref_Active1
VGCS/VBS call reference active
BITSTRING[27]
Group ID 1 on test SIM
R96
TSPX_Vcallref_Active2
VGCS/VBS call reference active
BITSTRING[27]
Group ID 4 on test SIM
R96
TSPX_Vcallref_Active3
VGCS/VBS call reference active
BITSTRING[27]
Group ID 20 on test SIM
R96
TSPX_Vcallref_Active4
VGCS/VBS call reference active
BITSTRING[27]
Group ID 30 on test SIM
R96
TSPX_Vcallref_Active5
VGCS/VBS call reference active
BITSTRING[27]
Group ID 50 on test SIM
R96
TSPX_Vcallref_NotActive
VGCS/VBS call reference non-active
BITSTRING[27]
Group ID 48 on test SIM
R96
Annex B (normative):
PCTR Proforma
Notwithstanding the provisions of the copyright clause related to the text of the present document, ETSI grants that users of the present document may freely reproduce the PCTR proforma in this annex so that it can be used for its intended purposes and may further publish the completed PCTR.
PROTOCOL Conformance Test Report (PCTR)
Global System for Mobile Communication, GSM, User-Network Access
Layer 3 Signalling Functions
Test Candidate
Name :
SUT name
Model :
model
H/W version :
hw
S/W version :
sw
Serial No. :
serienr
Client
Name :
Street / No. :
Postal Code / City:
Country :
This Test Report shall not be reproduced except in full without the written permission of TEST LAB REFERENCE, and shall not be quoted out of context.
Annex C (normative): Layer 3 Abstract Test Suite
This ATS is a normative part of the present document. The graphic form (TTCN . GR) and machine processable (TTCN .MP) files of the ATS are referred to GSM 11.10-3, version 4.t.0
Annex D (normative): Enhanced Full Rate Abstract Test Suite
This ATS is a normative part of the present document. The graphic form (TTCN . GR) and machine processable (TTCN .MP) files of the ATS are referred to GSM 11.10-3, version 4.t.0.
Annex E (informative): Cell Selection Abstract Test Suite
This ATS is an informative part of the present document. The graphic form (TTCN .GR) and machine processable (TTCN .MP) files of the ATS are referred to GSM 11.10-3, version 4.t.0.
Annex F (informative): Dual band Abstract Test Suite
This ATS is an informative part of the present document. The graphic form (TTCN .GR) and machine processable (TTCN .MP) files of the ATS are referred to GSM 11.10-3, version 4.t.0.
Annex G (normative): RGSM Abstract Test Suite
This ATS has been produced using the Tree and Tabular Combined Notation (TTCN) according to ISO/IEC 9646‑3 [3].
The ATS was developed on a separate TTCN software tool and therefore the TTCN tables are not completely referenced in the contents table. The ATS itself contains a test suite overview part which provides additional information and references.
G.1 The TTCN Graphical form (TTCN.GR)
The TTCN.GR representation of the ATS is contained in an Adobe Portable Document Format™ file (rgsm‑500.PDF contained in archive en_30060703v090000o0.ZIP) which accompanies the present document (Part 3).
G.2 The TTCN Machine Processable form (TTCN.MP)
The TTCN.MP representation corresponding to the ATS for is contained in an ASCII file (rgsm‑500.mp contained in archive en_30060703v090000o0.ZIP) which accompanies the present document (Part 3).
Annex H (normative):
ASCI Abstract Test Suite
This ATS has been produced using the Tree and Tabular Combined Notation (TTCN) according to ISO/IEC 9646‑3 [3].
The ATS contains groups for VGCS/VBS, eMLPP, UUS and Follow Me services. The ATS was developed on a separate TTCN software tool and therefore the TTCN tables are not completely referenced in the contents table. The ATS itself contains a test suite overview part which provides additional information and references.
These ATS are conform to R96 specifications
H.1 The TTCN Graphical form (TTCN.GR)
The TTCN.GR representation of the ATS is contained in an Adobe Portable Document Format™ file (asci-900.PDF contained in archive en_30060703v090000o0.ZIP) which accompanies the present document (Part 3).
H.2 The TTCN Machine Processable form (TTCN.MP)
The TTCN.MP representation corresponding to the ATS for is contained in an ASCII file (asci‑900.mp, contained in archive en_30060703v090000o0.ZIP) which accompanies the present document (Part 3).
History
Document history
V9.0.0
June 2000
|
fed31ee936becb3fd670e1e6e2ae795e
|
10.76
|
1 Scope
|
The purpose of this document is to describe the schedule of the standardisation process for the Noise Suppression feature for the Adaptive Multi Rate Codec and to define open issues that are still under discussion. It also lists the new standards and necessary amendments to the GSM/DCS phase 2+ specifications for the technical realisation of the function.
The new standards and Change Requests (CR) necessary for this feature are listed in clause 9.
|
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.