hash
stringlengths 32
32
| doc_id
stringlengths 5
12
| section
stringlengths 4
1.47k
| content
stringlengths 0
6.67M
|
|---|---|---|---|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.5.6.1.2.2 Test purpose
|
To verify that the MS on receipt of an MM message containing an IE unknown in the message, but known in the MM protocol, which is not encoded as "comprehension required" ignores that IE; this in the special case of the MM message being a LOCATION UPDATING ACCEPT responding to a LOCATION UPDATING REQUEST from the MS.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.5.6.1.2.3 Method of test
|
Initial conditions
System Simulator:
The SS simulates two cells, A and B, belonging to different location areas, default parameters.
Mobile Station:
The MS is in the MM-state "idle, updated" listening to the BCCH/CCCH of cell B. It has a valid TMSI.
Specific PICS statements:
-
PIXIT Statements:
-
Foreseen Final State of the MS
The MS is in the MM-state "idle, updated" listening to the BCCH/CCCH of cell A. It has a valid TMSI.
Test Procedure
The RF level of cell B is lowered until the MS selects cell A. The SS verifies that the MS establishes an RR connection and performs the normal location updating procedure using its TMSI. The SS responds to the location updating request with the LOCATION UPDATING ACCEPT message containing an optional information element not coded as "comprehension required" the IEI of which is unknown in the message but is used as the location area identification IEI in other messages of the MM protocol. The LOCATION UPDATING ACCEPT message contains a new TMSI in the mobile identity IE which is placed after the unknown IE. The MS shall send the TMSI REALLOCATION COMPLETE message.
Maximum duration of test
20 s.
Expected sequence
Step
Direction
Message
Comments
1
SS
The RF level of cell B is lowered until the MS selects cell A.
2
MS -> SS
CHANNEL REQUEST
3
SS -> MS
IMMEDIATE ASSIGNMENT
4
MS -> SS
LOCATION UPDATING REQUEST
The mobile identity IE specifies the TMSI of the MS.
5
SS -> MS
LOCATION UPDATING ACCEPT
See below.
6
MS -> SS
TMSI REALLOCATION COMPLETE
7
SS -> MS
CHANNEL RELEASE
The main signalling link is released.
Specific message contents
LOCATION UPDATING ACCEPT
Information element
value/remark
Location area identification
LAI of cell A
Unknown IEI
0001 0011
length
2
unknown IE contents
xxxx xxxx xxxx xxxx (2 arbitrary octets)
Mobile Identity IEI
length
5
Type of identity
TMSI
Identity
4 octets of "new" TMSI
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.5.6.2 Unknown information elements in the non-imperative message part / CC
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.5.6.2.1 Unknown information elements in the non-imperative message part / CC / Call establishment
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.5.6.2.1.1 Conformance requirements
|
The MS shall ignore all IEs unknown in a message which are not encoded as "comprehension required".
References
3GPP TS 04.08 / 3GPP TS 24.008, subclause 8.6.1.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.5.6.2.1.2 Test purpose
|
To verify that an MS supporting the CC protocol for at least one BC receiving a CC message containing an IE unknown in the message which is not encoded as "comprehension required" ignores that IE; this in the special case of the CC message being a CALL PROCEEDING message received by the MS in state U1.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.5.6.2.1.3 Method of test
|
Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS has a call control entity in CC state U1.
Specific PICS statements:
-
PIXIT Statements:
-
Foreseen Final State of the MS
The MS has a call control entity in CC state U3.
Test Procedure
The SS sends a CALL PROCEEDING message containing an optional information element not coded as "comprehension required" the IEI of which is unknown in the message, but used for a called party BCD number IE in other messages of the protocol. The SS verifies by use of the status enquiry procedure that the MS did not change the state.
Maximum duration of test
30 s.
Expected sequence
Step
Direction
Message
Comments
1
SS -> MS
CALL PROCEEDING
See below.
2
SS -> MS
STATUS ENQUIRY
TI refers to the call in progress.
3
MS -> SS
STATUS
TI refers to the active call; Cause IE indicates cause value #30. Call state IE indicates state U3.
Specific message contents
CALL PROCEEDING
Information element
value/remark
Unknown IEI
0101 1110
length
1
unknown IE contents
xxxx xxxx (arbitrary octet)
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.5.6.2.2 Unknown information elements in the non-imperative message part / CC / disconnect
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.5.6.2.2.1 Conformance requirements
|
The MS shall ignore all IEs unknown in a message which are not encoded as "comprehension required".
References
3GPP TS 04.08 / 3GPP TS 24.008, subclause 8.6.1.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.5.6.2.2.2 Test purpose
|
To verify that an MS supporting the CC protocol for at least one BC receiving a CC message containing an IE unknown in the message which is not encoded as "comprehension required" ignores that IE; this in the special case of a DISCONNECT message received by the MS in state U10.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.5.6.2.2.3 Method of test
|
Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS has a call control entity in CC state U10.
Specific PICS statements:
-
PIXIT Statements:
-
Foreseen Final State of the MS
The MS has a call control entity in CC state U19.
Test Procedure
The SS sends a DISCONNECT message containing an optional information element not coded as "comprehension required" the IEI of which is unknown in the message, but used for a connected number IE in other messages of the protocol. The SS verifies that the MS responds with a RELEASE message; the SS verifies by use of the status enquiry procedure that the MS has entered state U19.
Maximum duration of test
5 s.
Expected sequence
Step
Direction
Message
Comments
1
SS -> MS
DISCONNECT
See below.
2
MS -> SS
RELEASE
3
SS -> MS
STATUS ENQUIRY
4
MS -> SS
STATUS
Cause IE indicates cause value #30. Call state IE indicates state U19.
Specific message contents
DISCONNECT
Information element
value/remark
Unknown IEI
0100 1100
length
1
unknown IE contents
xxxx xxxx (arbitrary octet)
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.5.6.2.3 Unknown information elements in the non-imperative message part / CC / release
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.5.6.2.3.1 Conformance requirements
|
The MS shall ignore all IEs unknown in a message which are not encoded as "comprehension required".
References
3GPP TS 04.08 / 3GPP TS 24.008, subclause 8.6.1.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.5.6.2.3.2 Test purpose
|
To verify that an MS supporting the CC protocol for at least one BC receiving a CC message containing an IE unknown in the message which is not encoded as "comprehension required" ignores that IE; this in the special case of a RELEASE message received by the MS having sent in state U10 a DISCONNECT message.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.5.6.2.3.3 Method of test
|
Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS has a call control entity in CC state U10.
Specific PICS statements:
-
PIXIT Statements:
-
Foreseen Final State of the MS
The MS is in the MM-state "idle, updated" and in RR-idle mode.
Test Procedure
The MS is made to send a DISCONNECT message. The SS responds with a RELEASE message containing an optional information element not coded as "comprehension required" the IEI of which is unknown in the message, but used for a high layer compatibility IE in other messages of the protocol. The SS verifies that the MS responds with a RELEASE COMPLETE message; the SS then releases the RR connection.
Maximum duration of test
10 s.
Expected sequence
Step
Direction
Message
Comments
1
MS
The MS is made to initiate call clearing.
2
MS -> SS
DISCONNECT
3
SS -> MS
RELEASE
See below.
4
MS -> SS
RELEASE COMPLETE
5
SS -> MS
CHANNEL RELEASE
The RR connection is released.
Specific message contents
RELEASE
Information element
value/remark
Unknown IEI
0111 1101
length
1
unknown IE contents
1 arbitrary octet
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.5.6.2.4 Unknown information elements in the non-imperative message part / CC / release complete
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.5.6.2.4.1 Conformance requirements
|
The MS shall ignore all IEs unknown in a message which are not encoded as "comprehension required".
References
3GPP TS 04.08 / 3GPP TS 24.008, subclause 8.6.1.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.5.6.2.4.2 Test purpose
|
To verify that an MS supporting the CC protocol for at least one BC receiving a CC message containing an IE unknown in the message which is not encoded as "comprehension required" ignores that IE; this in the special case of a RELEASE COMPLETE message received by the MS in state U19.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.5.6.2.4.3 Method of test
|
Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS has a call control entity in CC state U10.
Specific PICS statements:
-
PIXIT Statements:
-
Foreseen Final State of the MS
The MS is in the MM-state "idle, updated" and in RR-idle mode.
Test Procedure
The SS sends a DISCONNECT message. The SS verifies that the MS responds with a RELEASE message. The SS answers with a RELEASE COMPLETE message containing an optional information element not coded as "comprehension required" the IEI of which is unknown in the message, but used for an auxiliary states IE in other messages of the protocol. The SS verifies that the MS releases the link after some time.
Maximum duration of test
20 s.
Expected sequence
Step
Direction
Message
Comments
1
SS -> MS
DISCONNECT
2
MS -> SS
RELEASE
3
SS -> MS
RELEASE COMPLETE
See below.
4
MS
The MS aborts the RR connection (it initiates release of L2 on SAPI 0)
Specific message contents
RELEASE COMPLETE
Information element
value/remark
Unknown IEI
0010 0100
length
1
unknown IE contents
1 arbitrary octet
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.5.6.3 Unknown IE in the non-imperative message part, comprehension not required / RR
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.5.6.3.1 Conformance requirements
|
The MS shall ignore all IEs unknown in a message which are not encoded as "comprehension required".
References
3GPP TS 04.08 / 3GPP TS 44.018, subclauses 8.6.1, 8.6.2 and 10.5.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.5.6.3.2 Test purpose
|
To verify that the MS ignores an IE which is unknown in a message for Radio Resource Management in the special cases of CIPHERING MODE COMMAND, ASSIGNMENT COMMAND and CHANNEL RELEASE.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.5.6.3.3 Method of test
|
Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in the MM-state "idle, updated" and in the RR-idle mode. It has a valid TMSI.
Specific PICS statements:
-
PIXIT Statements:
-
Foreseen Final State of the MS
The MS is in the MM-state "idle, updated" and in the RR-idle mode. It has a valid TMSI.
Test Procedure
In the normal call establishment the CIPHERING MODE COMMAND and ASSIGNMENT COMMAND contain additional IEs unknown in the message which are not encoded as "comprehension required", and therefore should be ignored by the MS. After sending an ASSIGNMENT COMPLETE, the subsequent CHANNEL RELEASE received by the MS also contains an IE unknown in a message which is not encoded as "comprehension required". The MS should ignore this IE.
Maximum duration of test
10 s.
Expected sequence
Step
Direction
Message
Comments
1
SS -> MS
PAGING REQUEST TYPE 1
2
MS -> SS
CHANNEL REQUEST
3
SS -> MS
IMMEDIATE ASSIGNMENT
4
MS -> SS
PAGING RESPONSE
5
SS -> MS
CIPHERING MODE COMMAND
See specific message contents
6
MS -> SS
CIPHERING MODE COMPLETE
7
SS -> MS
ASSIGNMENT COMMAND
See specific message contents
8
MS -> SS
ASSIGNMENT COMPLETE
On the dedicated channel
9
SS -> MS
CHANNEL RELEASE
See specific message contents
10
SS
The SS checks the release of the main signalling link at layer 2 level.
Specific message contents
None.
Step 5: CIPHERING MODE COMMAND
Cipher mode setting
- algorithm identifier
cipher with A5/1
- SC
start ciphering
Cipher Response
IMEI shall not be included
Unknown IE (type 2)
1001 0010
Step 7: ASSIGNMENT COMMAND
Channel Description
Channel Type
TCH/F + ACCHs
Timeslot number
arbitrarily selected, but not zero
Training sequence code
arbitrarily selected
Hopping
RF hopping channel
MAIO
0
HSN
0
Power Command
arbitrarily selected
First Unknown IE (Type 2)
1101 1010
Cell Channel Description
For GSM 450 mobiles, range 128 encodes ARFCNs 267 and 275.
For GSM 480 mobiles, range 128 encodes ARFCNs 315 and 322.
For GSM 710 mobiles, range 128 encodes ARFCNs 470 and 490.
For GSM 750 mobiles, range 128 encodes ARFCNs 470 and 490.
For T-GSM 810 mobiles, range 128 encodes ARFCNs 470 and 490.
For GSM 850 mobiles, range 128 encodes ARFCNs 160 and 180.
For PGSM and EGSM mobiles, bit map 0 encodes ARFCNs 30 and 50.
For DCS 1 800 and PCS 1 900 mobiles, the variable bit map format encodes ARFCNs 650 and 750.
Second Unknown IE (Type 4)
- IEI
0110 1001
- length
2
- contents
xxxx xxxx xxxx xxxx, where x is arbitrarily coded.
Mobile Allocation
For GSM450 mobiles, indicates ARFCN 275 only.
For GSM 480 mobiles, indicates ARFCN 322 only.
For GSM 710 mobiles, indicates ARFCN 490 only.
For GSM 750 mobiles, indicates ARFCN 490 only.
For T-GSM 810 mobiles, indicates ARFCN 490 only.
For GSM 850 mobiles, indicates ARFCN 180 only.
For PGSM and EGSM mobiles, indicates ARFCN 50, only.
For DCS 1 800 and PCS 1 900 mobiles, indicates ARFCN 750, only.
Step 9: CHANNEL RELEASE
RR Cause
normal event
Unknown IE (type 4)
- IEI
0111 0010
- length
5
- contents
xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx, where x is arbitrarily coded.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.5.7 Handling of unknown, unforeseen, and erroneous protocol data, and of parallel transactions / spare bits
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.5.7.1 Spare bits / RR
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.5.7.1.1 Spare bits / RR / paging channel
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.5.7.1.1.1 Conformance requirements
|
The MS shall ignore the value of spare bits.
References
3GPP TS 04.08 / 3GPP TS 44.018, subclause 10.5.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.5.7.1.1.2 Test purpose
|
To verify that the MS in the MM-state "idle, updated" and in RR-idle mode ignores the value of spare bits in the special case of the spare bits occurring in the P1 Rest Octets IE of a PAGING REQUEST TYPE 1 message. That the spare bits are ignored is checked by addressing the MS in that PAGING REQUEST message and verifying that the MS responds to that paging.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.5.7.1.1.3 Method of test
|
Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in the MM-state "idle, updated" and in RR-idle mode.
Specific PICS statements:
-
PIXIT Statements:
-
Foreseen Final State of the MS
The MS is in the MM-state "idle, updated" and in RR-idle mode.
Test Procedure
The SS sends a PAGING REQUEST TYPE 1 message containing at least one octet in the P1 rest octets IE that is different from 0010 1011.
Maximum duration of test
10 s.
Expected sequence
Step
Direction
Message
Comments
1
SS -> MS
PAGING REQUEST TYPE 1
See below.
2
MS -> SS
CHANNEL REQUEST
3
SS -> MS
IMMEDIATE ASSIGNMENT REJECT
Specific message contents
PAGING REQUEST TYPE 1
Information element
Value/remark
L2 pseudo length
k+3 where k is the sum of the length of the mobile identity 1 IE
Page Mode
Normal paging
Channels needed for Mobiles 1 and 2
Channel (first)
Any channel
Channel (second)
(spare)
Mobile identity 1
IMSI or TMSI of MS under test
Mobile identity 2
Omitted
P1 rest octets
not all octets are "0010 1011"
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.5.7.1.2 Spare bits / RR / BCCH
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.5.7.1.2.1 Conformance requirements
|
The MS shall ignore the value of spare bits.
References
3GPP TS 04.08 / 3GPP TS 44.018, subclause 10.5.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.5.7.1.2.2 Test purpose
|
To verify that the MS in the MM-state "idle, updated" and in RR-idle mode ignores the value of spare bits in the special case where these spare bits are contained in the SI3 and SI4 messages. That the MS ignores the value of the spare bits is checked by changing the LAI in those message and observing the MS initiating a location update though the spare bits do not all have the default value.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.5.7.1.2.3 Method of test
|
Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in the MM-state "idle, updated" and in RR-idle mode.
Specific PICS statements:
-
PIXIT Statements:
-
Foreseen Final State of the MS
The MS is in the MM-state "idle, updated" and in RR-idle mode.
Test Procedure
The SS simulates a BCCH where continuously for at least 30 s at least one octet of the SI3 Rest Octets IE in all SYSTEM INFORMATION TYPE 3 messages and at least one octet of the SI4 Rest Octets IE in all SYSTEM INFORMATION TYPE 4 messages is different from 0010 1011 and the location area identification IE denotes a location area different from the current location area held by the MS. The SS verifies that the MS sends a CHANNEL REQUEST message on the RACH including the establishment cause "location updating". The SS responds with an IMMEDIATE ASSIGNMENT REJECT message.
Maximum duration of test
10 s.
Expected sequence
Step
Direction
Message
Comments
1
SS -> MS
The SS starts sending modified SYSTEM INFORMATION TYPE 3 and SYSTEM INFORMATION TYPE 4 messages (as defined below) continuously for at least 30 s on the BCCH.
2
MS -> SS
CHANNEL REQUEST
Establishment cause = "location updating (SDCCH needed). This message may be received during the 30 s.
3
SS -> MS
IMMEDIATE ASSIGNMENT REJECT
Specific message contents
SYSTEM INFORMATION TYPE 3
Information element
value/remark
L2 pseudo length
18
cell identity
as required
location area identification
denoting a new location area
control channel description
as required, but with the spare bits arbitrarily selected and at least one spare bit set to 1.
cell options
as required, but with (spare) bit 8 set to 1
cell selection parameters
as required
RACH control parameters
as required
SI3 rest octets
at least one octet is different from "0010 1011"
SYSTEM INFORMATION TYPE 4
Information element
value/remark
L2 pseudo length
12
location area identification
denoting a new location area
cell selection parameters
as required
RACH control parameters
as required
SI4 rest octets
at least one octet is different from "0010 1011"
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.5.7.1.3 Spare bits / RR / AGCH
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.5.7.1.3.1 Conformance requirements
|
The MS shall ignore the value of spare bits.
References
3GPP TS 04.08 / 3GPP TS 44.018, subclause 10.5.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.5.7.1.3.2 Test purpose
|
To verify that the MS in the MM-state "idle, updated" and in RR-idle mode ignores the value of spare bits in the special case of the spare bits occurring in the Page Mode IE, the Spare Half Octet IE, the Channel Description IE, the Timing Advance IE, the IA Rest Octet IE, and in the IAR Rest Octet IE.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.5.7.1.3.3 Method of test
|
Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in the MM-state "idle, updated" and in RR-idle mode.
Specific PICS statements:
-
PIXIT Statements:
-
Foreseen Final State of the MS
The MS is in the MM-state "idle, updated" and in RR-idle mode.
Test Procedure
The SS sends an IMMEDIATE ASSIGNMENT message containing arbitrary spare bits in the Page Mode IE, in the Spare Half Octet IE, in the Channel Description IE, in the Timing Advance IE, and in the IA Rest Octet IE.
It is checked that the MS answers on the dedicated channel with a PAGING RESPONSE message and releases the main signalling link after a CHANNEL RELEASE message.
After a new paging of the MS an IMMEDIATE ASSIGNMENT REJECT is sent to test the spare bits in the IAR Rest Octet IE.
The MS is then paged again to check the idle state.
Maximum duration of test
20 s.
Expected sequence
Step
Direction
Message
Comments
1
SS -> MS
PAGING REQUEST TYPE 1
Addressing the MS under test
2
MS -> SS
CHANNEL REQUEST
3
SS -> MS
IMMEDIATE ASSIGNMENT
see below
4
MS -> SS
PAGING RESPONSE
5
SS -> MS
CHANNEL RELEASE
6
SS
The SS checks that the MS releases the main signalling link and waits 10 s for a cell reselection of the MS
7
SS -> MS
PAGING REQUEST TYPE 1
Addressing the MS under test
8
MS -> SS
CHANNEL REQUEST
9
SS -> MS
IMMEDIATE ASSIGNMENT REJECT
normal, waiting time = 0, except the IAR Rest Octet IE (see below)
10
SS
The SS waits six seconds
11
SS -> MS
PAGING REQUEST TYPE 1
Addressing the MS under test
12
MS -> SS
CHANNEL REQUEST
To check that the MS has reached the idle state after the IMMEDIATE ASSIGNMENT REJECT
Specific message contents
IMMEDIATE ASSIGNMENT
Information element
Value/remark
L2 pseudo length
sum of the length of all IE except L2 pseudo length and IA Rest Octets
Protocol Discriminator
RR
Skip Indicator
0000
Message Type
Immediate Assignment
Page mode
xx00 (where "xx" is arbitrary, with at least 1 bit set to 1)
Dedicated mode or TBF
x000 (where "x" is set to 1)
Channel description
normal, no hopping, the two spare bits before ARFCN are chosen arbitrarily with at least one bit set to 1.
Request reference
normal (derived from the CHANNEL REQUEST)
Timing advance
xx00 0000 (where "xx" is arbitrary, with at least 1 bit set to 1)
Mobile allocation
chosen so that, together with the channel description
Length
0
IA rest octets
first octet
00xx xxxx (where "xx xxxx" is arbitrary but different to 10 1011)
other octets
xxxx xxxx (where "xxxx xxxx" is arbitrary but different to 0010 1011)
IMMEDIATE ASSIGNMENT REJECT
Information element
Value/remark
L2 pseudo length
19
Page mode
normal
Spare half octet
xxxx (where "xxxx" is arbitrary, with at least 1 bit is set to 1)
Request reference 1
addressing the MS under test
Wait indication 1
0 s
...
Other Request References and Wait Indications arbitrary
IAR rest octets
Octet 1 to 3
xxxx xxxx (where "xxxx xxxx" is arbitrary but different to 0010 1011)
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.5.7.1.4 Spare bits / RR / Connected Mode
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.5.7.1.4.1 Conformance requirements
|
The MS shall ignore the value of spare bits.
References
3GPP TS 04.08 / 3GPP TS 44.018, subclause 10.5.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.5.7.1.4.2 Test purpose
|
To verify that the MS in the MM-state "MM-Connection active" and in RR-Connected mode ignores the value of spare bits in the special case of the spare bits occurring in the Cell Channel Description IE and in the Power Command IE.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.5.7.1.4.3 Method of test
|
Initial conditions
System Simulator:
1 cell, default parameters, except:
GSM 450 mobiles are assigned to ARFCN 293 in step 10.
GSM 480 mobiles are assigned to ARFCN 340 in step 10.
GSM 710, GSM 750 and T-GSM 810 mobiles are assigned to ARFCN 511 in step 10.
GSM 850 mobiles are assigned to ARFCN 251 in step 10.
PGSM and EGSM mobiles are assigned to ARFCN 124 in step 10.
DCS 1 800 and PCS 1 900 mobiles are assigned to ARFCN 801 in step 10.
Mobile Station:
The MS is in the MM-state "idle, updated" and in RR-idle mode.
Specific PICS statements:
-
PIXIT Statements:
-
Foreseen Final State of the MS
The MS is in the MM-state "idle, updated" and in RR-idle mode.
Test Procedure
In the procedure of a normal call establishment the ASSIGNMENT COMMAND will be modified to test the spare bits in the Cell Channel Description IE and in the Power Command IE.
Maximum duration of test
10 s.
Expected sequence
Step
Direction
Message
Comments
1
SS -> MS
PAGING REQUEST TYPE 1
Addressing the MS under test
2
MS -> SS
CHANNEL REQUEST
3
SS -> MS
IMMEDIATE ASSIGNMENT
4
MS -> SS
PAGING RESPONSE
5
SS -> MS
CIPHERING MODE COMMAND
6
MS -> SS
CIPHERING MODE COMPLETE
7
SS -> MS
SETUP
8
MS -> SS
CALL CONFIRMED
A9
MS -> SS
ALERTING
B9
MS ->SS
CONNECT
10
SS -> MS
ASSIGNMENT COMMAND
see below
11
MS -> SS
ASSIGNMENT COMPLETE
on the dedicated channel
12
SS -> MS
CHANNEL RELEASE
13
SS
The SS checks that the MS release the main signalling link
Specific message contents
ASSIGNMENT COMMAND
For GSM 450 mobiles
Information element
Value/remark
Channel Description
normal, hopping HSN=63, MAIO=0
Power Command
xxx0 0111 (where "xxx" is arbitrary, with at least 1 bit set to 1)
Cell Channel Description
octet 2
10xx 110? (where "xx" is arbitrary, with at least 1 bit set to 1) Bit 1 of octet 2 and all of octets 3 to 17 (inclusive) indicate ARFCN 293 only (using the Range 128 format).
Mobile Allocation
indicates ARFCN 293 only
For GSM 480 mobiles
Information element
Value/remark
Channel Description
normal, hopping HSN=63, MAIO=0
Power Command
xxx0 0111 (where "xxx" is arbitrary, with at least 1 bit set to 1)
Cell Channel Description
octet 2
10xx 110? (where "xx" is arbitrary, with at least 1 bit set to 1) Bit 1 of octet 2 and all of octets 3 to 17 (inclusive) indicate ARFCN 340 only (using the Range 128 format).
Mobile Allocation
indicates ARFCN 340 only
For GSM 710 or GSM 750 or T-GSM 810 mobiles
Information element
Value/remark
Channel Description
normal, hopping HSN=63, MAIO=0
Power Command
xxx0 0111 (where "xxx" is arbitrary, with at least 1 bit set to 1)
Cell Channel Description
Octet 2
10xx 110? (where "xx" is arbitrary, with at least 1 bit set to 1) Bit 1 of octet 2 and all of octets 3 to 17 (inclusive) indicate ARFCN 511 only (using the Range 128 format).
Mobile Allocation
indicates ARFCN 511 only
For GSM 850 mobiles
Information element
Value/remark
Channel Description
normal, hopping HSN=63, MAIO=0
Power Command
xxx0 0111 (where "xxx" is arbitrary, with at least 1 bit set to 1)
Cell Channel Description
Octet 2
10xx 110? (where "xx" is arbitrary, with at least 1 bit set to 1) Bit 1 of octet 2 and all of octets 3 to 17 (inclusive) indicate ARFCN 251 only (using the Range 128 format).
Mobile Allocation
Indicates ARFCN 251 only
For PGSM and EGSM mobiles
Information element
Value/remark
Channel Description
normal, hopping HSN=63, MAIO=0
Power Command
xxx0 0111 (where "xxx" is arbitrary, with at least 1 bit set to 1)
Cell Channel Description
octet 2
00xx 1000 (where "xx" is arbitrary, with at least 1 bit set to 1)
octet 3 to 17 (inclusive)
all bits set to zero
Mobile Allocation
indicates ARFCN 124 only
For DCS 1 800 or PCS 1 900 mobiles
Information element
Value/remark
Channel Description
normal, hopping, HSN=63, MAIO=0
Power Command
xxx0 0111 (where "xxx" is arbitrary, with at least 1 bit set to 1)
Cell Channel Description
octet 2
10xx 111? (where "xx" is arbitrary, with at least 1 bit set to 1). Bit 1 of octet 2 and all of octets 3 to 17 (inclusive) indicate ARFCN 801 only (using the variable bit map format).
Mobile Allocation
indicates ARFCN 801 only
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.5.7.2 Spare bits / MM
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.5.7.2.1 Conformance requirements
|
The MS shall ignore the value of spare bits.
References
3GPP TS 04.08 / 3GPP TS 24.008, subclause 10.5.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.5.7.2.2 Test purpose
|
To verify that the MS in the MM-state "wait net cmd" and in RR-Connected mode ignores the value of spare bits in the special case of the spare bits occurring in the Cipher Key Seq. Number IE or in the Identity Type IE.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.5.7.2.3 Method of test
|
Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in the MM-state "idle, updated" and in RR-idle mode.
Specific PICS statements:
-
PIXIT Statements:
-
Foreseen Final State of the MS
The MS is in the MM-state "idle, updated" and in RR-idle mode.
Test Procedure
After the establishment of the RR-connection, in the AUTHENTICATION REQUEST message the spare bits of the Ciphering Key Sequence Number and of the Spare Half Octet IE will be randomly chosen. The spare bits of the Identity Type IE and the Spare Half Octet IE in the IDENTITY REQUEST message will also be chosen arbitrarily.
Maximum duration of test
10 s.
Expected sequence
Step
Direction
Message
Comments
1
SS -> MS
PAGING REQUEST TYPE 1
Addressing the MS under test
2
MS -> SS
CHANNEL REQUEST
3
SS -> MS
IMMEDIATE ASSIGNMENT
4
MS -> SS
PAGING RESPONSE
5
SS -> MS
AUTHENTICATION REQUEST
see below
6
MS -> SS
AUTHENTICATION RESPONSE
7
SS -> MS
IDENTITY REQUEST
see below
8
MS -> SS
IDENTITY RESPONSE
with the right TMSI
9
SS -> MS
CHANNEL RELEASE
10
SS
The SS checks that the MS release the main signalling link
Specific message contents
AUTHENTICATION REQUEST
Information element
Value/remark
Ciphering Key Sequence Number
x000 (where "x" is set to 1)
Spare Half Octet
xxxx (where "xxxx" is arbitrary, with at least 1 bit set to 1)
Auth. Parameter RAND
standard value
IDENTITY REQ
Information element
Value/remark
Identity Type
x100 (where "x" is set to 1)
Spare Half Octet
xxxx (where "xxxx" is arbitrary, with at least 1 bit set to 1)
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.5.7.3 Spare bits / CC
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.5.7.3.1 Conformance requirements
|
The MS shall ignore the value of spare bits.
References
3GPP TS 04.08 / 3GPP TS 24.008, subclause 10.5.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.5.7.3.2 Test purpose
|
To verify that the MS in the MM-state "connection established" and in RR-Connected mode ignores the value of spare bits in the special case of the spare bits occurring in the Calling Party BCD Number IE, Calling Party Subaddress IE, Called Party Subaddress IE, Cause IE and Progress Indicator IEs.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.5.7.3.3 Method of test
|
Initial conditions
System Simulator:
1 cell, default parameters.
Mobile Station:
The MS is in the MM-state "idle, updated" and in RR-idle mode.
Specific PICS statements:
- Support of speech (TSPC_AddInfo_Full_rate_version_1, TSPC_AddInfo_Half_rate_version_1)
PIXIT Statements:
-
Foreseen Final State of the MS
The MS is in the MM-state "idle, updated" and in RR-idle mode.
Test Procedure
After the establishment of the MM-connection, in the SETUP message the spare bits of the Calling Party BCD Number, Calling Party Subaddress and Called Party Subaddress will be arbitrarily chosen and also in the DISCONNECT message the spare bits of the Progress Indicator IE and of the Cause IE will be arbitrarily chosen.
Maximum duration of test
10 s.
Expected sequence
Step
Direction
Message
Comments
1
SS -> MS
PAGING REQUEST TYPE 1
Addressing the MS under test
2
MS -> SS
CHANNEL REQUEST
3
SS -> MS
IMMEDIATE ASSIGNMENT
4
MS -> SS
PAGING RESPONSE
5
SS -> MS
AUTHENTICATION REQUEST
6
MS -> SS
AUTHENTICATION RESPONSE
7
SS -> MS
CIPHERING MODE COMMAND
8
MS -> SS
CIPHERING MODE COMPLETE
9
SS -> MS
SETUP
see below
10
MS -> SS
CALL CONFIRMED
A11
MS -> SS
CONNECT
B11
MS -> SS
ALERTING
B12
MS -> SS
CONNECT
13
SS -> MS
ASSIGNMENT COMMAND
14
MS -> SS
ASSIGNMENT COMPLETE
15
SS -> MS
CONNECT ACKNOWLEDGE
16
SS -> MS
DISCONNECT
see below
If PICS TSPC_AddInfo_Full_rate_version_1 OR TSPC_AddInfo_Half_rate_version_1 is set to TRUE, path ‘A' will be followed else path ‘B’ will be followed.
17A
SS -> MS
STATUS ENQUIRY
18A
MS -> SS
STATUS
with actual call state U12
19A
SS -> MS
RELEASE
20A
MS -> SS
RELEASE COMPLETE
17B
MS -> SS
RELEASE
18B
SS -> MS
RELEASE COMPLETE
After step 18B test will move to step 21.
21
SS -> MS
CHANNEL RELEASE
Specific message contents
SETUP
Information element
Value/remark
Calling Party BCD Number
IEI
length
3
octet 3
0000 0000
octet 3a
100x xx00 (where "x" is chosen arbitrarily, with at least one bit set to 1)
octet 4
0000 0001
Calling Party Subaddress
IEI
length
3
octet 3
1000 0xxx (where "x" is chosen arbitrarily, with at least one bit set to 1)
octet 4
0101 0000 (AFI: request IA5 character)
octet 5
0000 0001
Called Party Subaddress
IEI
length
3
octet 3
1000 0xxx (where "x" is chosen arbitrarily, with at least one bit set to 1)
octet 4
0101 0000 (AFI: request IA5 character)
octet 5
0000 0001
DISCONNECT
Information element
Value/remark
Cause
Length
2
octet 3
111x 0000 (where "x" is set to 1)
octet 4
1000 0001
Progress Indicator
IEI
Length
2
octet 3
111x 0000 (where "x" is set to 1)
progress description
8 (in band info now available)
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.5.8 Default contents of messages
|
Default requirements for messages that are not mentioned in this subclause are given in subclause 26.8.4.
CHANNEL RELEASE
Information element
Value/remark
RR cause
Normal event
CHANNEL REQUEST
DISCONNECT (SS -> MS)
Information element
Value/remark
Cause
Coding standard
Standard defined for the GSM PLMNS
Location
user
Cause value
#16
IDENTITY REQUEST
Information element
Value/remark
Identity type
Depending on test
Spare half octet
0000
IMMEDIATE ASSIGNMENT
Information element
Value/remark
L2 pseudo length
n, where n is the L2 pseudo length of the message
Page mode
arbitrary
Spare half octet
0000
Channel description
a valid description of an SDCCH + SACCH
Request reference
Corresponding to the last CHANNEL REQUEST received from the MS
Timing advance
arbitrary
Mobile allocation
chosen so that, together with the channel description IE, it describes a valid SDCCH + SACCH
Starting time
Omitted
IA rest octets
m octets, each coded as H'2B, where m = 22 - n
IMMEDIATE ASSIGNMENT REJECT
Information element
Value/remark
L2 pseudo length
19
Page mode
arbitrary
Spare half octet
0000
Request reference 1
corresponding to the last CHANNEL REQUEST received from the MS
Wait indication 1
0 s
Request reference 2
arbitrary
Wait indication 2
0 s
Request reference 3
arbitrary
Wait indication 3
0 s
Request reference 4
arbitrary
Wait indication 4
0 s
IA rest octets
3 octets, each coded as H'2B
PAGING REQUEST TYPE 1
Information element
Value/remark
L2 pseudo length
n where n is the sum of the mobile identity 1 IE and 3
Page Mode
Normal paging
Channels needed for Mobiles 1 and 2
Channel (first)
Any channel
Channel (second)
(spare)
Mobile identity 1
IMSI or TMSI of MS under test
Mobile identity 2
Omitted
P1 rest octets
m octets, each coded as H'2B, where m = 22 - n
PAGING RESPONSE
RELEASE COMPLETE (MS -> SS)
No default requirements defined for this message.
RELEASE COMPLETE (SS -> MS)
Information element
Value/remark
Cause
Coding standard
Standard defined for the GSM PLMNS
Location
user
Cause value
#16
STATUS (MS -> SS)
Information element
Value/remark
Cause
Length
length of cause IE
Coding standard
Standard defined for the GSM PLMNS
Location
user
Cause value
as defined in test
Call state
as defined in test
STATUS ENQUIRY (SS -> MS)
Information element
Value/remark
Transaction identifier
relating to the active call
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6 Test of the elementary procedures for radio resource management
|
NOTE: For SS implementor: if tests are concatenated, it is important that unused fields in IMMEDIATE ASSIGNMENT REJECT messages do not use Request References that relate to CHANNEL REQUEST messages recently transmitted by the MS.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.1 Immediate assignment
|
The immediate assignment procedure is used by the network to establish a dedicated control channel for the MS and network to communicate the detail of the service requested. If the Mobile Station does not implement the procedure correctly, radio resources can be wasted as the Mobile Station might use the wrong channels.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.1.1 Immediate assignment / SDCCH or TCH assignment
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.1.1.1 Conformance requirement
|
1. Following a PAGING REQUEST message, the MS shall correctly set up an RR connection on the SDCCH/8 described in the IMMEDIATE ASSIGNMENT message.
2. Following a PAGING REQUEST message, the MS shall correctly set up an RR connection on the TCH/FACCH described in the IMMEDIATE ASSIGNMENT message.
Reference(s)
3GPP TS 04.08 / 3GPP TS 44.018, subclause 3.3.1.1.2.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.1.1.2 Test purpose
|
To verify that the MS can correctly set up a dedicated SDCCH control channel and that the MS can correctly set up a dedicated TCH/FACCH control channel.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.1.1.3 Method of test
|
Initial Conditions
System Simulator:
1 cell, except that CCCH_CONF is set to "1 basic physical channel used for CCCH not combined with SDCCHs".
Mobile Station:
The MS is in the "idle, updated" state, with a TMSI allocated.
Specific PICS statements
- MS supports SDCCH only (TSPC_AddInfo_SDCCHOnly)
- MS supports GSM HR (TSPC_AddInfo_HalfRate)
PIXIT statements
-
Foreseen Final State of the MS
"Idle, updated", with TMSI allocated.
Test Procedure
The System Simulator pages the MS and after the MS has responded with a CHANNEL REQUEST message the SS assigns an SDCCH. The MS shall go to the correct channel and send a PAGING RESPONSE message. Then the SS initiates RR-release by sending a CHANNEL RELEASE message.
If TCH/F is supported by the MS, the test is repeated with the SS assigning a TCH/F (Signalling).
If TCH/H is supported by the MS, the test is repeated with the SS assigning a TCH/H (Signalling).
Maximum Duration of Test
6 s per value of the execution timer.
Expected Sequence
This sequence is performed for execution counter, K = 1, 2, 3 (unless the TCH is not supported).
Step
Direction
Message
Comments
1
SS -> MS
PAGING REQUEST TYPE 1
2
MS -> SS
CHANNEL REQUEST
3
SS -> MS
IMMEDIATE ASSIGNMENT
Channel Type: see below
4
MS -> SS
PAGING RESPONSE
Shall be sent on the correct channel
5
SS -> MS
CHANNEL RELEASE
Specific Message Contents
IMMEDIATE ASSIGNMENT
K=1, SDCCH test: Channel Type = SDCCH/8.
K=2, TCH/F (Signalling) test: Channel Type = Bm + ACCHs.
K=3, TCH/H (Signalling) test: Channel Type = Lm + ACCHs, subchannel arbitrarily chosen.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.1.2 Immediate assignment / extended assignment
|
NOTE 2: In these tests the SS must send the immediate assignment messages in due time to allow for the MS to receive them and send a PAGING RESPONSE rather than another random access. This applies to the whole of clause 26.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.1.2.1 Conformance requirements
|
1. The MS shall go to the allocated SDCCH/4 and send a PAGING RESPONSE message containing its identity and its classmark.
2. The MS shall go to the allocated SDCCH/8 and send a PAGING RESPONSE message containing its identity and its classmark.
3. The MS shall correctly identify its own assignment in either the Request Reference 1 or the Request Reference 2 information element in an extended assignment message.
4. The MS shall only react to an Immediate Assignment which references one of the last 3 CHANNEL REQUEST messages from the MS.
References
3GPP TS 04.08 / 3GPP TS 44.018, subclause 3.3.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.1.2.2 Test purpose
|
To verify that the MS goes to the allocated SDCCH/4 and sends a PAGING RESPONSE message containing its identity and its classmark.
To verify that the MS goes to the allocated SDCCH/8 and sends a PAGING RESPONSE message containing its identity and its classmark.
To verify that the MS can correctly identify its own assignment in either the Request Reference 1 or the Request Reference 2 information element in an extended assignment message.
To verify that the MS only reacts to an Immediate Assignment which references one of the last 3 CHANNEL REQUEST messages from the MS.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.1.2.3 Method of test
|
Initial Conditions
System Simulator:
1 cell, Max-retrans is set to 7.
Mobile Station:
The MS is in the "idle, updated" state. with a TMSI allocated.
Specific PICS statements
-
PIXIT statements
-
Foreseen Final State of the MS
"Idle, updated", with a TMSI allocated.
Test Procedure
In the first part of the test, the SS pages the MS, which shall react by sending CHANNEL REQUEST messages. Immediately after reception of the n-th CHANNEL REQUEST message (n being arbitrarily chosen by the SS from the set {1, 2 ... 8}) the SS sends an IMMEDIATE ASSIGNMENT EXTENDED message, which references one of the last 3 CHANNEL REQUEST messages from the MS. The MS shall then go to the correct channel and send a PAGING RESPONSE message. The SS will then release the channel.
In the second part of the test, the SS again pages the MS, which shall react by sending CHANNEL REQUEST messages. Immediately after reception of the k-th CHANNEL REQUEST message (k being arbitrarily chosen by the SS from the set {4, 5 ... 8}) the SS sends an IMMEDIATE ASSIGNMENT EXTENDED message which, instead of referencing one of the last 3 CHANNEL REQUEST messages from the MS, references an earlier CHANNEL REQUEST message. The MS shall then ignore the IMMEDIATE ASSIGNMENT EXTENDED message and continue to send CHANNEL REQUEST messages until the Max-Retrans value has been reached. Then a period of 7 seconds shall elapse in order to allow the MS to perform cell reselection (this allows for the time between the last CHANNEL REQUEST message and the beginning of cell reselection).
In the third part of the test, the CCCH_CONF of the SS is set to non-combined and the SS pages the MS, which shall react by sending CHANNEL REQUEST messages. Immediately after reception of the r-th CHANNEL REQUEST message (r being arbitrarily chosen by the SS from the set {4, 5 ... 8}) the SS sends an IMMEDIATE ASSIGNMENT EXTENDED message which, in the second request reference, references one of the last 3 CHANNEL REQUEST messages from the MS. The associated Channel Description allocates SDCCH(S) (S being arbitrarily chosen by the SS from the set {0,1 ... 7}). The MS shall then go to the correct channel and send a PAGING RESPONSE message. The SS will then release the channel.
Maximum Duration of Test
90 s.
Expected Sequence
Step
Direction
Message
Comments
1
SS -> MS
PAGING REQUEST TYPE 1
2
MS -> SS
CHANNEL REQUEST
n CHANNEL REQUESTs (n being arbitrarily chosen from {1.... 8} are sent, all with Establ. Cause = "Answer to paging".
3
MS -> SS
CHANNEL REQUEST
4
SS -> MS
IMMEDIATE ASSIGNMENT EXTENDED
see note 1.
5
MS -> SS
PAGING RESPONSE
6
SS -> MS
CHANNEL RELEASE
7
--------
--------
The SS waits 12 s to allow the MS to perform cell reselection.
8
SS -> MS
PAGING REQUEST TYPE 1
9
MS -> SS
CHANNEL REQUEST
k CHANNEL REQUESTs (k being arbitrarily chosen from the set {4, 5, 8}) are sent all with Establ. Cause = "Answer to paging".
10
MS -> SS
CHANNEL REQUEST
11
SS -> MS
IMMEDIATE ASSIGNMENT EXTENDED
see note 2.
12
MS -> SS
CHANNEL REQUEST
8-k CHANNEL REQUESTs are sent, all with Establ. Cause = "Answer to paging".
13
MS -> SS
CHANNEL REQUEST
14
SS
The SS verifies that the MS does not transmit any Layer 2 frames for at least 3 s.
15
SS
The SS sets CCCH_CONF to non-combined.
16
SS
The SS waits 40 s to allow the MS to perform cell reselection and to read the BCCH information.
17
SS -> MS
PAGING REQUEST TYPE 1
18
MS -> SS
CHANNEL REQUEST
r CHANNEL REQUESTs (r being arbitrarily chosenfrom {4, 5... 8} are sent, all with Establ. Cause = "Answer to paging".
19
MS -> SS
CHANNEL REQUEST
20
SS -> MS
IMMEDIATE ASSIGNMENT EXTENDED
see note 3.
21
MS -> SS
PAGING RESPONSE
22
SS -> MS
CHANNEL RELEASE
Specific Message Contents
NOTE 1: The first Request Reference is the one which pertains to the i-th CHANNEL REQUEST sent by the MS, where i is an integer in the set {max (1,n‑2) ... n}, its value being arbitrarily chosen by the SS. The second Request Reference shall be different from any Request Reference the MS has generated in this test.
NOTE 2: The first Request Reference is the one which pertains to the i-th CHANNEL REQUEST sent by the MS, where i is an integer in the set {1 ... k‑3}, its value being arbitrarily chosen by the SS. The second Request Reference shall be different from any Request Reference the MS has generated in this test.
NOTE 3: The second Request Reference is the one which pertains to the i-th CHANNEL REQUEST sent by the MS, where i is an integer in the set {r‑2, r‑1, r}, its value being arbitrarily chosen by the SS. The first Request Reference shall be different from any Request Reference the MS has generated in this test.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.1.3 Immediate assignment / assignment rejection
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.1.3.1 Conformance requirements
|
1. The MS shall respond to the Paging Request message by sending a Channel Request message with establishment cause set to "Answer to Paging". After the reception of IMMEDIATE ASSIGNMENT REJECT, the MS shall not transmit during the time indicated in the "Wait Indication" field of the IMMEDIATE ASSIGNMENT REJECT message, and then it shall answer to the new paging requests.
2. After an assignment rejection, the MS shall perform a cell reselection (idle mode operation) and the MS shall not transmit unless a different cell is selected.
References
3GPP TS 04.08 / 3GPP TS 44.018, subclause 3.3.1.1.3 and 3GPP TS 04.13 subclause 5.2.2.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.1.3.2 Test purpose
|
To verify that the MS can accept an IMMEDIATE ASSIGNMENT REJECT.
To verify that the MS can respond to paging after an IMMEDIATE ASSIGNMENT REJECT is received on a different cell.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.1.3.3 Method of test
|
Initial Conditions
System Simulator:
2 cells with the same LAI, Max-Retrans is 7.
Mobile Station:
The MS is camped on cell A and is in the "idle, updated" state, with a TMSI allocated.
Specific PICS statements
-
PIXIT statements
-
Foreseen Final State of the MS
The MS is camped on cell B and is in the "idle, updated" state, with a TMSI allocated.
Test Procedure
The SS pages the MS, which shall react by sending CHANNEL REQUESTs. Immediately after reception of the n-th CHANNEL REQUEST (n being an integer from the set {1, 2 ... 8}, arbitrarily chosen by the SS) the SS sends an IMMEDIATE ASSIGNMENT REJECT message, which references one of the last 3 CHANNEL REQUESTs from the MS, and with the Wait Indication set to x seconds (x being an integer from the set {5, 6 ... 255}, arbitrarily chosen by the SS). The SS continues to send paging messages for that mobile station in every block of the mobile station's paging subgroup for x+2 s. The MS shall not answer to the PAGING REQUEST TYPE 1 messages sent before x seconds have elapsed. The MS may respond to any one of the PAGING REQUEST TYPE 1 messages sent after x seconds have elapsed, but at the latest it shall respond to the first PAGING REQUEST TYPE 1 sent after x+1 seconds have elapsed.
The SS responds to this CHANNEL REQUEST with an IMMEDIATE ASSIGNMENT REJECT message with the Wait Indication set to 255 s.
Immediately afterwards the SS changes the power levels so the MS selects cell B. After 20 s have elapsed the SS pages the MS in cell B and the MS shall answer to this page. In order to avoid another cell reselection the SS then sends another IMMEDIATE ASSIGNMENT REJECT.
Maximum Duration of Test
5 minutes.
Expected Sequence
Step
Direction
Message
Comments
1
SS -> MS
PAGING REQUEST TYPE 1
2
MS -> SS
CHANNEL REQUEST
n CHANNEL REQUESTs (n being
.
.
.
arbitrarily chosen from the set {1, 2
.
.
.
... 8}) are sent, all with
1+n
MS -> SS
CHANNEL REQUEST
Establ. Cause = "Answer to paging"
2+n
SS -> MS
IMMEDIATE ASSIGNMENT REJECT
1st, 3rd and 4th Request References are different to all n Request References received from the MS under test. 2nd Request Reference: see note 1. 2nd Wait Indication = x seconds (x being arbitrarily chosen from the set {5 ,6 ... 255}.
3+n
SS -> MS
PAGING REQUEST TYPE 1
The SS repeatedly pages the MS (on its paging subchannel) until a CHANNEL REQUEST message is received from the MS.
.
.
.
.
.
.
k
SS -> MS
PAGING REQUEST TYPE 1
(note 2).
k+1
MS -> SS
CHANNEL REQUEST
Establ. Cause = "Answer to paging".
The MS may respond to any one of the PAGING REQUEST TYPE 1 messages sent after x seconds expire, but at the latest the MS shall respond to the first PAGING REQUEST TYPE 1 message sent after x+1 seconds expire.
k+2
SS -> MS
IMMEDIATE ASSIGNMENT REJECT
1st, 2nd and 4th Request References are different to all n Request References received from the MS. The 3rd Request Reference pertains to the last CHANNEL REQUEST sent by the MS. The 3rd Wait Indication is 255 s.
k+3
--------
----------
Raise power level of cell B, lower power level of cell A until the MS selects cell B.
k+4
SS -> MS
PAGING REQUEST TYPE 1
Sent once, 20 s after the change of levels.
k+5
MS -> SS
CHANNEL REQUEST
Establ. Cause = "Answer to paging".
k+6
SS -> MS
IMMEDIATE ASSIGNMENT REJECT
NOTE 1: The Request Reference is the one which pertains to the i-th CHANNEL REQUEST sent by the MS, where i is an integer from the set {max(1,n‑2) ... n}, its value being arbitrarily chosen by the SS.
NOTE 2: the value of k is not important in this test.
Specific Message Contents
None.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.1.4 Immediate assignment / ignore assignment
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.1.4.1 Conformance requirements
|
1. An MS waiting for a response from the network, following the sending of a CHANNEL REQUEST, shall ignore an IMMEDIATE ASSIGNMENT message with a request reference containing a wrong frame number.
2. An MS is waiting for an assignment of its own, shall ignore an IMMEDIATE ASSIGNMENT message with a request reference containing a wrong random access information.
References
3GPP TS 04.08 / 3GPP TS 44.018, subclause 3.3.1.1.2
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.1.4.2 Test purpose
|
To verify that the MS ignores an assignment for another MS while it is waiting for an assignment of its own.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.1.4.3 Method of test
|
Initial Conditions
System Simulator:
1 cell.
Mobile Station:
The MS is in the "idle, updated" state, with a TMSI allocated.
Specific PICS statements
-
PIXIT statements
-
Foreseen Final State of the MS
"Idle, updated", with TMSI allocated.
Test Procedure
The SS pages the MS, which reacts with CHANNEL REQUESTs. The SS responds to the first CHANNEL REQUEST with an IMMEDIATE ASSIGNMENT containing a wrong Request Reference (in the first run of the test the frame number is wrong, in the repetition it is the random access info that is wrong). It is verified for 2 s that the MS does not start signalling on the SDCCH. The MS shall ignore the assignment and send another CHANNEL REQUEST message. In order to avoid cell reselection the SS now answers with a correct IMMEDIATE ASSIGNMENT REJECT and repeats the test once.
Maximum Duration of Test
12 s.
Expected Sequence
Step
Direction
Message
Comments
1
SS -> MS
PAGING REQUEST TYPE 1
2
MS -> SS
CHANNEL REQUEST
Establ. Cause = "Answer to paging".
3
SS -> MS
IMMEDIATE ASSIGNMENT
Frame number in Request Reference is 2 too high. The MS shall not start signalling on the assigned SDCCH. This is verified for a period of 2 s.
4
MS -> SS
CHANNEL REQUEST
Establ. Cause = "Answer to paging".
5
SS -> MS
IMMEDIATE ASSIGNMENT REJECT
6
SS
SS waits for 6 s.
7
SS -> MS
PAGING REQUEST TYPE 1
8
MS -> SS
CHANNEL REQUEST
Establ. Cause = "Answer to paging".
9
SS -> MS
IMMEDIATE ASSIGNMENT
Random access info in Request Reference is wrong. The MS shall not start signalling on the assigned SDCCH. This is verified for a period of 2 s.
10
MS -> SS
CHANNEL REQUEST
Establ. Cause = "Answer to paging".
11
SS -> MS
IMMEDIATE ASSIGNMENT REJECT
Specific Message Contents
None.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.1.5 Immediate assignment after immediate assignment reject
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.1.5.1 Conformance requirement
|
Following an IMMEDIATE ASSIGNMENT REJECT message, the MS shall listen for IMMEDIATE ASSIGNMENTS until T3126 expires.
Reference
3GPP TS 04.08 / 3GPP TS 44.018, subclause 3.3.1.1.3
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.1.5.2 Test purpose
|
To verify that the MS correctly responds to an IMMEDIATE ASSIGNMENT message sent after an IMMEDIATE ASSIGNMENT REJECT message.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.1.5.3 Method of test
|
Initial conditions
System Simulator:
1 cell;
CCCH_CONF is set to "1 basic physical channel used for CCCH not combined with SDCCHs";
Max retrans is set to 7;
TX-integer is set to 7;
Mobile Station:
The MS is in "idle, updated" state, with a TMSI allocated.
Specific PICS statements
-
PIXIT statements
-
Foreseen final state of the MS
"idle, updated", with TMSI allocated.
Test Procedure
The SS pages the MS, which shall react by sending CHANNEL REQUESTs. Immediately after reception of the third CHANNEL REQUEST the SS sends an IMMEDIATE ASSIGNMENT REJECT message which references the first CHANNEL REQUEST from the MS and has the Wait Indication IE set to 6 s.
Between 0,75 s and 1,25 s after sending the IMMEDIATE ASSIGNMENT REJECT message the SS sends an IMMEDIATE ASSIGNMENT message referencing the second CHANNEL REQUEST message, and assigning an SDCCH. The MS shall go to the correct channel and send a PAGING RESPONSE message. Then the SS initiates RR-release by sending a CHANNEL RELEASE message.
Maximum duration of test
10 s.
Expected Sequence
Step
Direction
Message
Comments
1
SS -> MS
PAGING REQUEST TYPE 1
2
MS -> SS
CHANNEL REQUEST
first request.
3
MS -> SS
CHANNEL REQUEST
second request.
4
MS -> SS
CHANNEL REQUEST
third request.
5
SS -> MS
IMMEDIATE ASSIGNMENT REJ
references the first request from MS, Wait Indication IE set to 6 s.
6
SS -> MS
IMMEDIATE ASSIGNMENT
references the second request from the MS Channel type set to SDCCH/8 message sent between 0,75 s and 1,25 s after the completion of step 5.
7
MS -> SS
PAGING RESPONSE
shall be sent on the correct channel.
8
SS -> MS
CHANNEL RELEASE
Specific message contents
None.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.1.6 Immediate assignment / implicit rejection
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.1.6.1 Conformance requirement
|
The network may at any time include an implicit reject indication for the PS domain or the CS domain within an IMMEDIATE ASSIGNMENT message using the IA Rest Octets IE (see sub-clause 10.5.2.16) or within an IMMEDIATE ASSIGNMENT REJECT or an IMMEDIATE ASSIGNMENT EXTENDED message using the Feature Indicator IE (see sub-clause 10.5.2.76) or within a PAGING REQUEST TYPE 1 message using the P1 Rest Octets IE (see sub-clause 10.5.2.23) or within a PAGING REQUEST TYPE 2 message using the P2 Rest Octets IE (see sub-clause 10.5.2.24) or within a PAGING REQUEST TYPE 3 message using the P3 Rest Octets IE (see sub-clause 10.5.2.25).
The RR entity of a mobile station configured for “low access priority” (see 3GPP TS 23.060), when attempting to establish a CS connection other than in case of an emergency call or when the mobile station is a member of an authorized special access class or sending a paging response shall, while ignoring MS identities included within PAGING REQUEST messages, start listening to the downlink CCCH until successfully decoding one of the RR messages listed in sub-clause 3.3.1.1.1a. If the RR message indicates an implicit reject for the CS domain (see sub-clause 3.3.1.1.1a) the mobile station shall abort the immediate assignment procedure and initiate the Implicit Reject procedure (see sub-clause 3.3.1.1.3.2a).
If the mobile station initiates this procedure due to implicit reject indication received for the CS domain (respectively PS domain) it starts timer T3234 (respectively timer T3236) and returns to idle mode. The mobile station is not allowed to make a mobile originated access attempt for the CS domain (respectively PS domain) in the same cell until T3234 (respectively T3236) expires or is stopped. If the mobile station receives a PAGING REQUEST message while T3234/T3236 is running it shall stop T3234/T3236 and respond to the PAGING REQUEST message.
Reference
3GPP TS 44.018 subclauses 3.3.1.1.1a, 3.3.1.1.2 and 3.3.1.1.3.2a.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.1.6.2 Test purpose
|
To verify that the MS, if configured for LAP, activates the implicit reject timer when it reads a CCCH block that indicates that implicit reject condition is indicated.
To verify that the MS does not make any access attempt when the implicit reject timer is active
To verify that the MS, if configured for LAP, when waiting for a response to its initial or subsequent access attempt, detects an implicit reject condition but does not detect an access response within the allowed access response time window, will abort its access attempt and start the implicit reject timer.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.1.6.3 Method of test
|
Initial conditions
System Simulator:
1 cell;
Mobile Station:
The MS is switched off.
The MS is configured for “low access priority” and “Extended Access Barring”
Max retrans is set to 7
Specific PICS statements
-
PIXIT statements
-
Foreseen final state of the MS
"idle, updated", with TMSI allocated.
Test Procedure
The MS is switched on and initiates the location updating procedure. When receiving the first CHANNEL REQUEST the SS issues a paging message that is not addressed to the MS but contains an indication that implicit reject is active. The MS reads the implicit rejection flag and starts timer T3234. SS checks that MS does not send further CHANNEL REQUESTs until minimum value of T3234 and re-attempts location updating procedure after maximum value of T3234.The SS sends an IMMEDIATE ASSIGNMENT message which includes the implicit reject flag. The MS abort the immediate assignments procedure and starts timer T3234. SS checks that MS does not send another CHANNEL REQUEST until minimum value of T3234 and re-attempts location updating procedure after maximum value of T3234.MS performs a successful location updating procedure.
Maximum duration of test
7 minutes.
Expected Sequence
Step
Direction
Message
Comments
1
MS
Make the MS perform the location updating procedure
MS
CHANNEL REQUEST
Mobile may send up to MaxRetrans+1 CHANNEL REQUEST until PAGING REQUEST TYPE 1 in step 2 is received.
2
SS -> MS
PAGING REQUEST TYPE 1
1st Mobile Identity does not contain TMSI of MS but with the Implicit Reject CS bit set to “1”.
3
MS
Timer T3234 (random value drawn from the following set: {10.0, 10.1, 10.2, …200.0} seconds) is active.
MS
MS discards all further CHANNEL REQUESTS from access attempt
4
MS -> SS
CHANNEL REQUEST
Not received within 10 seconds after step 2. May be sent within 10 and 200 seconds. Shall be sent after 200 seconds.
"Establishment cause": Location updating.
5
SS -> MS
IMMEDIATE ASSIGNMENT
The Implicit Reject CS bit set to “1”.
6
MS
Timer T3234 (random value drawn from the following set: {10.0, 10.1, 10.2, …200.0} seconds) is active.
7
MS -> SS
CHANNEL REQUEST
Not received within 10 seconds after step 5. May be sent within 10 and 200 seconds. Shall be sent after 200 seconds.
"Establishment cause": Location updating.
8
SS -> MS
IMMEDIATE ASSIGNMENT
9
MS -> SS
LOCATION UPDATING REQUEST
"location updating type" = normal
10
SS -> MS
LOCATION UPDATING ACCEPT
11
SS -> MS
CHANNEL RELEASE
After the sending of this message, the SS waits for the disconnection of the main signalling link.
Specific message contents
None.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.1.7 Void
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.2 Test of paging
|
The Paging procedure is used by the network to cause the Mobile Station to establish a radio connection. Normally the Mobile Station listens to its paging subchannel, but this can be modified by the use of different page modes. The correct implementation of the paging procedure in the Mobile Station is essential for the basic establishment of a connection.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.2.1 Normal paging
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.2.1.1 Paging / normal / type 1
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.2.1.1.1 Conformance requirements
|
1. The MS shall respond correctly to various PAGING REQUEST TYPE 1 messages, when the page mode is set to normal paging, in the following cases:
1.1 The MS is addressed with its IMSI in the first Mobile Identity field. The optional Mobile Identity field is not present.
1.2. The MS is addressed with its TMSI in the first Mobile Identity field. The optional Mobile Identity field specifies an IMSI different from that of the MS.
1.3. The first Mobile Identity field specifies a TMSI different from that of the MS. The optional Mobile Identity field addresses the MS by its IMSI.
1.4 The first Mobile Identity field specifies a TMSI different from that of the MS. The optional Mobile Identity field contains the correct TMSI of the MS.
2. An MS shall ignore PAGING REQUEST TYPE 1 messages with incorrect information, when the page mode is set to normal paging, in the following case:
2.1 The MS is addressed with its TMSI in the first Mobile Identity field, but the type of identity in this field is set to "No Identity". The optional Mobile Identity field is not present.
References
3GPP TS 04.08 / 3GPP TS 44.018, subclause 3.3.2, 3GPP TS 05.02 subclause 6.5.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.2.1.1.2 Test purpose
|
To test that the MS is able to determine its CCCH group and paging group correctly and that the MS responds correctly to various PAGING REQUEST TYPE 1 messages when the page mode is set to normal paging. All valid ways of addressing the MS are tested. It is tested that the MS responds with the same type of identity that is used in the PAGING REQUEST TYPE 1 message. It is tested that the MS ignores fill paging.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.2.1.1.3 Method of test
|
Initial Conditions
System Simulator:
1 cell, Max-Retrans = 2, a legal combination of CCCH_CONF, BS_AG_BLKS_RES and BS_PA_MFRMS is chosen arbitrarily by the SS.
Mobile Station:
The MS is in the "idle, updated" state, with a TMSI allocated.
Specific PICS statements
-
PIXIT statements
-
Foreseen Final State of the MS
"Idle, updated", with TMSI allocated.
Test Procedure
The SS pages the MS 5 times with different PAGING REQUEST TYPE 1 messages on the paging subchannel which corresponds to the MS's IMSI.
In the first 4 cases, where the MS is addressed by its IMSI or its TMSI, the MS shall answer to the paging by sending CHANNEL REQUESTs. The SS responds to the second CHANNEL REQUEST by assigning a channel, and the MS shall then send a correct PAGING RESPONSE. The SS then releases the channel.
In the last case, it is tested that the MS does not answer to paging that does not address it.
Maximum Duration of Test
2 minutes.
Expected Sequence
Step
Direction
Message
Comments
1
SS -> MS
PAGING REQUEST TYPE 1
1st Mobile Ident contains IMSI of MS, 2nd Mobile Ident not present.
2
MS -> SS
CHANNEL REQUEST
Establ. Cause = "Answer to paging".
3
MS -> SS
CHANNEL REQUEST
Establ. Cause = "Answer to paging".
4
SS -> MS
IMMEDIATE ASSIGNMENT
Request Reference = pertaining to the message received in step 3.
5
MS -> SS
PAGING RESPONSE
Mobile Ident: IMSI.
6
SS -> MS
CHANNEL RELEASE
--------
--------
The SS waits 12 s to allow the MS to perform cell reselection.
7
SS -> MS
PAGING REQUEST TYPE 1
1st Mobile Ident contains TMSI of MS, 2nd Mobile Ident contains IMSI of another MS.
8
MS -> SS
CHANNEL REQUEST
Establ. Cause = "Answer to paging".
9
MS -> SS
CHANNEL REQUEST
Establ. Cause = "Answer to paging".
10
SS -> MS
IMMEDIATE ASSIGNMENT
Request Reference = pertaining to the message received in step 9.
11
MS -> SS
PAGING RESPONSE
Mobile Ident: TMSI.
12
SS -> MS
CHANNEL RELEASE
--------
--------
The SS waits 12 s to allow the MS to perform cell reselection.
13
SS -> MS
PAGING REQUEST TYPE 1
1st Mobile Ident contains TMSI of another MS, 2nd Mobile Ident contains IMSI of MS.
14
MS -> SS
CHANNEL REQUEST
Establ. Cause = "Answer to paging".
15
MS -> SS
CHANNEL REQUEST
Establ. Cause = "Answer to paging".
16
SS -> MS
IMMEDIATE ASSIGNMENT
Request Reference = pertaining to the message received in step 15.
17
MS -> SS
PAGING RESPONSE
Mobile Ident: IMSI.
18
SS -> MS
CHANNEL RELEASE
--------
--------
The SS waits 12 s to allow the MS to perform cell reselection.
19
SS -> MS
PAGING REQUEST TYPE 1
1st Mobile Ident contains TMSI of another MS, 2nd Mobile Ident contains TMSI of MS.
20
MS -> SS
CHANNEL REQUEST
Establ. Cause = "Answer to paging".
21
MS -> SS
CHANNEL REQUEST
Establ. Cause = "Answer to paging".
22
SS -> MS
IMMEDIATE ASSIGNMENT
Request Reference = pertaining to the message received in step 21.
23
MS -> SS
PAGING RESPONSE
Mobile Ident: TMSI.
24
SS -> MS
CHANNEL RELEASE
--------
--------
The SS waits 12 s to allow the MS to perform cell reselection.
25
SS -> MS
PAGING REQUEST TYPE 1
1st Mobile Ident contains TMSI of MS but with type of identity set to "no identity", second Mobile Ident not present.
26
--------
--------
During 1 second, the SS checks that the MS does not produce any Layer 3 messages.
Specific Message Contents
None.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.2.1.2 Paging / normal / type 2
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.2.1.2.1 Conformance requirements
|
1. The MS shall respond correctly (by sending CHANNEL REQUEST messages with an Establishment Cause set to "Answer to Paging") to various PAGING REQUEST TYPE 2 messages, when the page mode is set to normal paging, in the following cases:
1.1 The MS is addressed in the first TMSI field.
1.2 The MS is addressed in the second TMSI field.
1.3 The MS is addressed in the optional Mobile Identity field with its TMSI.
1.4 The MS is addressed in the optional Mobile Identity field with its IMSI.
2. The MS shall ignore PAGING REQUEST TYPE 2 messages with incorrect information, when the page mode is set to normal paging, in the following case:
2.1 The MS is addressed in the optional Mobile Identity field with its TMSI, but the type of identity in this field is set to "No Identity".
References
3GPP TS 04.08 / 3GPP TS 44.018, subclause 3.3.2.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.2.1.2.2 Test purpose
|
To test that the MS is able to determine its CCCH group and paging group correctly and that the MS responds correctly to various PAGING REQUEST TYPE 2 messages when the page mode is set to normal paging. All valid ways of addressing the MS are tested. It is tested that the MS responds with the same type of identity that is used in the PAGING REQUEST TYPE 2 message. It is tested that the MS ignores a PAGING REQUEST TYPE 2 message that does not address it.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.2.1.2.3 Method of test
|
Initial Conditions
System Simulator:
1 cell, Max-Retrans = 2, a legal combination of CCCH_CONF, BS_AG_BLKS_RES and BS_PA_MFRMS is chosen arbitrarily by the SS.
Mobile Station:
The MS is in the "idle, updated" state, with a TMSI allocated.
Specific PICS statements
-
PIXIT statements
-
Foreseen Final State of the MS
"Idle, updated", with TMSI allocated.
Test Procedure
The SS pages the MS 5 times with different PAGING REQUEST TYPE 2 messages on the paging subchannel which corresponds to the MS's IMSI.
In the first 4 cases, where the MS is addressed by its IMSI or by its TMSI, the MS shall answer to the paging by sending CHANNEL REQUESTs. The SS responds to the second request by assigning a channel, and the MS shall then send a correct PAGING RESPONSE. The SS then releases the channel.
In the last case, it is tested that the MS does not answer to paging that does not address it.
Maximum Duration of Test
5 minutes, including 1 minute for any necessary operator actions.
Expected Sequence
Step
Direction
Message
Comments
1
SS -> MS
PAGING REQUEST TYPE 2
1st TMSI addresses MS, 2nd TMSI addresses another MS, Mobile Identity IE not present.
2
MS -> SS
CHANNEL REQUEST
Establ. Cause = "Answer to paging".
3
MS -> SS
CHANNEL REQUEST
Establ. Cause = "Answer to paging".
4
SS -> MS
IMMEDIATE ASSIGNMENT
Request Reference = pertaining to the message received in step 3.
5
MS -> SS
PAGING RESPONSE
Mobile Ident: TMSI.
6
SS -> MS
CHANNEL RELEASE
--------
--------
The SS waits 12 s to allow the MS to perform cell reselection.
7
SS -> MS
PAGING REQUEST TYPE 2
1st TMSI addresses another MS, 2nd TMSI addresses MS, Mobile Identity IE not present.
8
MS -> SS
CHANNEL REQUEST
Establ. Cause = "Answer to paging".
9
MS -> SS
CHANNEL REQUEST
Establ. Cause = "Answer to paging".
10
SS -> MS
IMMEDIATE ASSIGNMENT
Request Reference = pertaining to the message received in step 9.
11
MS -> SS
PAGING RESPONSE
Mobile Ident: TMSI.
12
SS -> MS
CHANNEL RELEASE
--------
--------
The SS waits 12 s to allow the MS to perform cell reselection.
13
SS -> MS
PAGING REQUEST TYPE 2
1st TMSI addresses another MS, 2nd TMSI addresses another MS, Mobile Identity IE contains TMSI of MS.
14
MS -> SS
CHANNEL REQUEST
Establ. Cause = "Answer to paging".
15
MS -> SS
CHANNEL REQUEST
Establ. Cause = "Answer to paging"
16
SS -> MS
IMMEDIATE ASSIGNMENT
Request Reference = pertaining to the message received in step 15
17
MS -> SS
PAGING RESPONSE
Mobile Ident: TMSI.
18
SS -> MS
CHANNEL RELEASE
--------
--------
The SS waits 12 s to allow the MS to perform cell reselection
19
SS -> MS
PAGING REQUEST TYPE 2
1st TMSI addresses another MS, 2nd TMSI addresses another MS, Mobile Identity IE contains IMSI of MS.
20
MS -> SS
CHANNEL REQUEST
Establ. Cause = "Answer to paging"
21
MS -> SS
CHANNEL REQUEST
Establ. Cause = "Answer to paging"
22
SS -> MS
IMMEDIATE ASSIGNMENT
Request Reference = pertaining to the message received in step 21
23
MS -> SS
PAGING RESPONSE
Mobile Ident: IMSI.
24
SS -> MS
CHANNEL RELEASE
--------
--------
The SS waits 12 s to allow the MS to perform cell reselection
25
SS -> MS
PAGING REQUEST TYPE 2
1st TMSI addresses another MS, 2nd TMSI addresses another MS, Mobile Identity IE contains TMSI of MS but with type of identity set to "no identity".
26
--------
--------
During 1 second, the SS checks that the MS does not produce any Layer 3 messages.
Specific Message Contents
None.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.2.1.3 Paging / normal / type 3
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.2.1.3.1 Conformance requirements
|
An MS shall respond correctly to various PAGING REQUEST TYPE 3 messages, when the page mode is set to normal paging. The MS shall send CHANNEL REQUEST messages, with an Establishment Cause set to "Answer to Paging", until the network answers. The number of CHANNEL REQUEST messages shall be limited by the parameter Max-retrans. After the assignment procedure, the MS shall send a PAGING RESPONSE message on the channel assigned by the network.
References
3GPP TS 04.08 / 3GPP TS 44.018, subclause 3.3.2.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.2.1.3.2 Test purpose
|
To test that the MS is able to determine its CCCH group and paging group correctly and that the MS responds correctly to various PAGING REQUEST TYPE 3 messages when the page mode is set to normal paging. All valid ways of addressing the MS are tested.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.2.1.3.3 Method of test
|
Initial Conditions
System Simulator:
1 cell, Max-Retrans = 2, a legal combination of CCCH_CONF, BS_AG_BLKS_RES and BS_PA_MFRMS is chosen arbitrarily by the SS.
Mobile Station:
The MS is in the "idle, updated" state, with a TMSI allocated.
Specific PICS statements
-
PIXIT statements
-
Foreseen Final State of the MS
"Idle, updated", with TMSI allocated.
Test Procedure
The SS pages the MS 4 times with different PAGING REQUEST TYPE 3 messages on the paging subchannel which corresponds to the MS's IMSI.
In all the cases the MS shall answer to the paging by sending CHANNEL REQUESTs. The SS responds to the second request by assigning a channel, and the MS shall then send a correct PAGING RESPONSE. The SS then releases the channel.
Maximum Duration of Test
5 minutes, including 1 minute for any necessary operator actions.
Expected Sequence
Step
Direction
Message
Comments
1
SS -> MS
PAGING REQUEST TYPE 3
1st TMSI addresses MS; 2nd, 3rd and 4th TMSIs address other MSs.
2
MS -> SS
CHANNEL REQUEST
Establ. Cause = "Answer to paging".
3
MS -> SS
CHANNEL REQUEST
Establ. Cause = "Answer to paging".
4
SS -> MS
IMMEDIATE ASSIGNMENT
Request Reference = pertaining to the message received in step 3.
5
MS -> SS
PAGING RESPONSE
Mobile Ident: TMSI.
6
SS -> MS
CHANNEL RELEASE
--------
--------
The SS waits 12 s to allow the MS to perform cell reselection.
7
SS -> MS
PAGING REQUEST TYPE 3
2nd TMSI addresses MS; 1st, 3rd and 4th TMSIs address other MSs.
8
MS -> SS
CHANNEL REQUEST
Establ. Cause = "Answer to paging".
9
MS -> SS
CHANNEL REQUEST
Establ. Cause = "Answer to paging".
10
SS -> MS
IMMEDIATE ASSIGNMENT
Request Reference = pertaining to the message received in step 9.
11
MS -> SS
PAGING RESPONSE
Mobile Ident: TMSI.
12
SS -> MS
CHANNEL RELEASE
--------
--------
The SS waits 12 s to allow the MS to perform cell reselection.
13
SS -> MS
PAGING REQUEST TYPE 3
3rd TMSI addresses MS; 1st, 2nd and 4th TMSIs address other MSs.
14
MS -> SS
CHANNEL REQUEST
Establ. Cause = "Answer to paging".
15
MS -> SS
CHANNEL REQUEST
Establ. Cause = "Answer to paging".
16
SS -> MS
IMMEDIATE ASSIGNMENT
Request Reference = pertaining to the message received in step 15.
17
MS -> SS
PAGING RESPONSE
Mobile Ident: TMSI.
18
SS -> MS
CHANNEL RELEASE
--------
--------
The SS waits 12 s to allow the MS to perform cell reselection.
19
SS -> MS
PAGING REQUEST TYPE 3
4th TMSI addresses MS; 1st, 2nd and 3rd TMSIs address other MSs.
20
MS -> SS
CHANNEL REQUEST
Establ. Cause = "Answer to paging".
21
MS -> SS
CHANNEL REQUEST
Establ. Cause = "Answer to paging".
22
SS -> MS
IMMEDIATE ASSIGNMENT
Request Reference = pertaining to the message received in step 21.
23
MS -> SS
PAGING RESPONSE
Mobile Ident: TMSI.
24
SS -> MS
CHANNEL RELEASE
Specific Message Contents
None.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.2.2 Paging / extended
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.2.2.1 Conformance requirements
|
1. The MS shall operate in the extended page mode when this is ordered by the network in a PAGING REQUEST TYPE 1 message not addressing the MS but on the paging subchannel which corresponds to the MS's identity.
2. The MS shall operate in the extended page mode when this is ordered by the network in a PAGING REQUEST TYPE 2 message not addressing the MS but on the paging subchannel which corresponds to the MS's identity.
3. The MS shall operate in the extended page mode when this is ordered by the network in a PAGING REQUEST TYPE 3 message not addressing the MS but on the paging subchannel which corresponds to the MS's identity.
4. The MS shall operate in the extended page mode when this is ordered by the network in an IMMEDIATE ASSIGNMENT message on the paging subchannel which corresponds to the MS's identity.
5. The MS shall operate in the extended page mode when this is ordered by the network in an IMMEDIATE ASSIGNMENT EXTENDED message on the paging subchannel which corresponds to the MS's identity.
References
3GPP TS 04.08 / 3GPP TS 44.018, subclause 3.3.2.1; 3GPP TS 05.02, subclause 6.5.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.2.2.2 Test purpose
|
To test that the MS is operating in the extended page mode when this is ordered by the SS in either a PAGING REQUEST message or an IMMEDIATE ASSIGNMENT message.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.2.2.3 Method of test
|
Initial Conditions
System Simulator:
1 cell, Max-Retrans = 2, a legal combination of CCCH_CONF, BS_AG_BLKS_RES and BS_PA_MFRMS is chosen arbitrarily by the SS.
Mobile Station:
The MS is in the "idle, updated" state, with a TMSI allocated.
Specific PICS statements
-
PIXIT statements
-
Foreseen Final State of the MS
"Idle, updated", with TMSI allocated.
Test Procedure
The SS sends a PAGING REQUEST TYPE 1 message not addressing the MS under test but on the paging subchannel which corresponds to the MS's identity. The page mode is set to "extended paging". In the next but one paging subblock on the same CCCH the SS sends a PAGING REQUEST TYPE 1 message specifying an arbitrarily chosen page mode and addressing the MS by its TMSI. The MS shall respond to the last page by sending CHANNEL REQUESTs. The SS responds to the second CHANNEL REQUEST with an IMMEDIATE ASSIGNMENT REJECT message.
The SS then sends an IMMEDIATE ASSIGNMENT on the paging subchannel which corresponds to the MS's identity. The random reference is different to those used by the Mobile Station in the last two CHANNEL REQUEST messages. (Phase 2 requires a Mobile Station to react on an IMMEDIATE ASSIGNMENT after a rejection.) The page mode is again set to "extended paging". In the next but one paging subblock on the same CCCH the SS sends a PAGING REQUEST TYPE 2 message specifying an arbitrarily chosen page mode and addressing the MS by its TMSI. The MS shall respond with CHANNEL REQUESTs. The SS responds to the second CHANNEL REQUEST with an IMMEDIATE ASSIGNMENT REJECT message.
The SS then sends an IMMEDIATE ASSIGNMENT EXTENDED on the paging subchannel which corresponds to the MS's identity. The random references are different to those used by the Mobile Station in the last three CHANNEL REQUEST messages. The page mode is again set to "extended paging". In the next but one paging subblock on the same CCCH the SS sends a PAGING REQUEST TYPE 3 message specifying an arbitrarily chosen page mode and addressing the MS by its TMSI. The MS shall respond with CHANNEL REQUESTs. The SS responds to the second CHANNEL REQUEST with an IMMEDIATE ASSIGNMENT REJECT message.
The SS then sends a PAGING REQUEST TYPE 3 message not addressing the MS under test but on the paging subchannel which corresponds to the MS's identity. The page mode is set to "extended paging". In the next but one paging subblock on the same CCCH the SS sends a PAGING REQUEST TYPE 2 message specifying an arbitrarily chosen page mode and addressing the MS by its IMSI. The MS shall respond to the last page by sending CHANNEL REQUESTs. The SS responds to the second CHANNEL REQUEST with an IMMEDIATE ASSIGNMENT REJECT message.
The SS then sends a PAGING REQUEST TYPE 2 message not addressing the MS under test but on the paging subchannel which corresponds to the MS's identity. The page mode is set to "extended paging". In the next but one paging subblock on the same CCCH the SS sends a PAGING REQUEST TYPE 1 message specifying an arbitrarily chosen page mode and addressing the MS by its IMSI. The MS shall respond to the last page by sending CHANNEL REQUESTs. The SS responds to the second CHANNEL REQUEST with an IMMEDIATE ASSIGNMENT REJECT message.
Maximum Duration of Test
10 s.
Expected Sequence
Step
Direction
Message
Comments
1
SS -> MS
PAGING REQUEST TYPE 1
Mobile Ident: IMSI of another MS, page mode = "extended paging".
2
SS -> MS
PAGING REQUEST TYPE 1
Sent in the next but one paging subblock. Page mode is arbitrarily chosen Mobile Ident: TMSI of the MS.
3
MS -> SS
CHANNEL REQUEST
4
MS -> SS
CHANNEL REQUEST
5
SS -> MS
IMMEDIATE ASSIGNMENT REJECT
Wait indication = 5 s. page mode = normal.
6
SS
SS waits for 5 s.
SS -> MS
IMMEDIATE ASSIGNMENT
Sent in the paging subblock of MS under test. Page mode = "extended paging", Request reference chosen arbitrarily by the SS, but different from all references used earlier in this test sequence.
8
SS -> MS
PAGING REQUEST TYPE 1
Sent in the next but one paging subblock. Page mode is arbitrarily chosen. Mobile Ident: TMSI of the MS.
9
MS -> SS
CHANNEL REQUEST
10
MS -> SS
CHANNEL REQUEST
11
SS -> MS
IMMEDIATE ASSIGNMENT REJECT
Wait indication = 5 s. page mode = normal.
12
SS
--
SS waits for 5 s.
13
SS -> MS
IMMEDIATE ASSIGNMENT EXT
Sent in the paging subblock of MS under test. Page mode = "extended paging", Request references chosen arbitrarily by the SS, but different from all references used earlier in this test sequence.
14
SS -> MS
PAGING REQUEST TYPE 3
Sent in the next but one paging subblock. Page mode is arbitrarily chosen. Mobile Ident: TMSI of the MS.
15
MS -> SS
CHANNEL REQUEST
16
MS -> SS
CHANNEL REQUEST
17
SS -> MS
IMMEDIATE ASSIGNMENT REJECT
Wait indication = 5 s page mode = normal.
18
SS
--
SS waits for 5 s.
19
SS -> MS
PAGING REQUEST TYPE 3
Sent in the paging subblock of MS under test. Page mode = "extended paging".
20
SS -> MS
PAGING REQUEST TYPE 2
Sent in the next but one paging subblock. Page mode is arbitrarily chosen. Mobile Ident: IMSI of the MS.
21
MS -> SS
CHANNEL REQUEST
22
MS -> SS
CHANNEL REQUEST
23
SS -> MS
IMMEDIATE ASSIGNMENT REJECT
Wait indication = 5 s page mode = normal.
24
SS
--
SS waits for 5 s
25
SS -> MS
PAGING REQUEST TYPE 2
Sent in the paging subblock of MS under test. Page mode = "extended paging".
26
SS -> MS
PAGING REQUEST TYPE 1
Sent in the next but one paging subblock. Page mode is arbitrarily chosen. Mobile Ident: IMSI of the MS.
27
MS -> SS
CHANNEL REQUEST
28
MS -> SS
CHANNEL REQUEST
29
SS -> MS
IMMEDIATE ASSIGNMENT REJECT
Wait indication = 5 s.
Specific Message Contents
None.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.2.3 Paging / reorganization
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.2.3.1 Paging / reorganization / procedure 1
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.2.3.1.1 Conformance requirements
|
1. An MS, after reception of a message with page mode set to "paging reorganization", shall answer to paging messages (with page mode set to "normal paging") sent on its old CCCH in paging blocks which do not belong to the MS's paging sub-channel.
2. When the network changes the paging group of the MS by modifying BCCH parameters (to CCCH_CONF set to "1 basic physical channel used for CCCH combined with SDCCH", and BS_AG_BLKS_RES set to "2 blocks reserved for access grant"), the MS shall calculate its new paging group and answer to paging messages on its new paging subchannel.
3. When the network changes the paging group of the MS by modifying BCCH parameters (to CCCH_CONF set to "2 basic physical channels used for CCCH, not combined with SDCCHs" and BS_AG_BLKS_RES set to "2 blocks reserved for access grant"), the MS shall calculate its new paging group and answer to paging messages on its new paging subchannel.
References
3GPP TS 04.08 / 3GPP TS 44.018, subclause 3.3.2.1; 3GPP TS 05.02, subclause 6.5.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.2.3.1.2 Test purpose
|
To test that the MS correctly determines its new paging subchannel when the CCCH structure is changed from non-combined to combined and when the number of CCCHs is changed.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
26.6.2.3.1.3 Method of test
|
Initial Conditions
System Simulator:
1 cell, Max-Retrans = 2, CCCH_CONF set to "1 basic physical channel used for CCCH, not combined with SDCCHs", a legal combination of BS_AG_BLKS_RES and BS_PA_MFRMS is chosen arbitrarily by the SS, with the exception that BS_PA_MFRMS shall not be set to 9.
Mobile Station:
The MS is in the "idle, updated" state, with a TMSI allocated. The IMSI of the MS is from a defined/default range that ensures its paging channel changes when the broadcast parameters are changed.
Specific PICS statements
-
PIXIT statements
-
Foreseen Final State of the MS
"Idle, updated", with TMSI allocated.
Test Procedure
The SS sends an IMMEDIATE ASSIGNMENT EXTENDED message on the MS's paging subchannel, with the page mode element set to "paging reorganization" and Request References that do not pertain to the MS. Before the MS's original paging subchannel re-occurs, the SS pages it on the CCCH corresponding to the Mobile Station's IMSI with a PAGING REQUEST TYPE 2 message (page mode = normal paging) containing the MS's TMSI in some paging block which does not belong to the Mobile Station's paging subchannel. The MS shall respond by sending CHANNEL REQUESTs. The SS responds to the second CHANNEL REQUEST with an IMMEDIATE ASSIGNMENT REJECT (in order to avoid a cell reselection) on an arbitrarily selected paging subchannel.
Then the SS starts sending messages (PAGING REQUEST TYPE 1 or PAGING REQUEST TYPE 2 or PAGING REQUEST TYPE 3 or IMMEDIATE ASSIGNMENT or IMMEDIATE ASSIGNMENT EXTENDED or IMMEDIATE ASSIGNMENT REJECT) with page mode set to "paging reorganization" on all paging subchannels.
After 5 s (to ensure T3126 expires) the SS pages the MS with its TMSI on an arbitrarily selected paging subchannel (on the CCCH corresponding to the Mobile Station's IMSI). The MS shall respond by sending CHANNEL REQUESTs. The SS responds to the second CHANNEL REQUEST with an IMMEDIATE ASSIGNMENT REJECT (in order to avoid a cell reselection).
The SS changes the paging parameters.
Then the SS sets the page mode to "normal paging".
The SS then waits for the duration of five 51-TDMA multiframes (4 to allow the MS to read all the system information type 1, 2, 3, and 4 messages on the BCCH, and one to calculate the new paging group). Not before 5 s after the last IMMEDIATE ASSIGNMENT REJECT message addressing the MS (to ensure T3126 expires), the MS is paged with a PAGING REQUEST TYPE 1 on its new paging subchannel. The MS shall respond by sending CHANNEL REQUESTs. The SS responds to the second CHANNEL REQUEST with an IMMEDIATE ASSIGNMENT REJECT (in order to avoid a cell reselection) and then waits 5 s (to ensure T3126 expires).
Then the MS is paged with a PAGING REQUEST TYPE 2 on its new paging subchannel. The MS shall respond by sending CHANNEL REQUESTs. The SS responds to the second CHANNEL REQUEST with an IMMEDIATE ASSIGNMENT REJECT (in order to avoid a cell reselection).
Maximum Duration of Test
60 s.
Expected Sequence
This sequence is performed for execution counter, K =1, 2.
Step
Direction
Message
Comments
1
SS -> MS
IMMEDIATE ASSIGNMENT EXTENDED
Sent on the MS's paging channel. Page mode set to "paging reorganization". Request Reference not pertaining to the MS.
2
SS -> MS
PAGING REQUEST TYPE 2
Sent before the MS's original paging subchannel re-occurs, but later than the next paging block of that CCCH.
3
MS -> SS
CHANNEL REQUEST
4
MS -> SS
CHANNEL REQUEST
5
SS -> MS
IMMEDIATE ASSIGNMENT REJECT
Wait indication = 0 s.
6
--------
--------
All L3 messages sent on any paging subchannel are paging fill frames specify "paging re organization.
7
SS -> MS
PAGING REQUEST TYPE 2
Sent on an arbitrarily selected paging subchannel Page mode "paging reorganization" Not sent before 5 s after step 5.
8
MS -> SS
CHANNEL REQUEST
9
MS -> SS
CHANNEL REQUEST
10
SS -> MS
IMMEDIATE ASSIGNMENT REJECT
Wait indication = 0 s.
11
Change of paging parameters in SYS INFO 3 as described below for K=1, 2.
12
The SS waits until it has sent all system information messages (page mode is still paging reorganization).
13
--------
--------
All L3 messages sent on any paging subchannel specify "normal paging.
14
--------
--------
Wait 3 s.
15
SS -> MS
PAGING REQUEST TYPE 1
Sent on the new paging subchannel of the MS. Not sent before 5 s after step 10.
16
MS -> SS
CHANNEL REQUEST
17
MS -> SS
CHANNEL REQUEST
18
SS -> MS
IMMEDIATE ASSIGNMENT REJECT
Wait indication = 0 s.
19
SS -> MS
PAGING REQUEST TYPE 2
Sent on the new paging subchannel of the MS. Not sent before 5 s after step 18.
20
MS -> SS
CHANNEL REQUEST
21
MS -> SS
CHANNEL REQUEST
22
SS -> MS
IMMEDIATE ASSIGNMENT REJECT
Specific Message Contents
For execution counter K:
K=1:
SYSTEM INFORMATION TYPE 3 shall have the Control Channel Description IE changed to:
CCCH_CONF "1 basic physical channel used for CCCH, combined with SDCCHs"
BS_AG_BLKS_RES 2
BS_PA_MFRMS 9
K=2:
SYSTEM INFORMATION TYPE 3 shall have the Control Channel Description IE changed to:
CCCH_CONF "2 basic physical channel used for CCCH, not combined with SDCCHs"
BS_AG_BLKS_RES 2
BS_PA_MFRMS 9
|
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.