gpt-MT/evaluation/system-outputs/separated-domains/ecommerce/wmt-best/deen/test.de-en.en

All Bosch power tools, pneumatic tools and measuring tools are carefully checked, tested and are subject to the strict controls of Bosch quality assurance.
Bosch therefore gives a guarantee for Bosch power tools, pneumatic tools and measuring tools.
The buyer's claims for liability for defects arising from the purchase contract with the seller and statutory rights are not restricted by this guarantee.
We provide a guarantee for these tools in accordance with the following conditions:
We provide a guarantee in accordance with the following regulations (Nos. 2 - 7) by remedying defects in the tool free of charge, which can be proven to be due to a material or manufacturing defect within the guarantee period.
The warranty period is 24 months, 12 months for commercial or professional use or equivalent stress.
The guarantee period begins with the purchase by the first customer.
The date on the original purchase receipt is decisive.
For all commercial, blue power tools and measuring tools purchased from September 1, 2004 (with the exception of high-frequency tools, industrial cordless screwdrivers and compressed air tools), the warranty period is extended to 36 months if the buyer registers these tools within 4 weeks of the date of purchase.
Battery packs and chargers as well as supplied accessories are excluded from this warranty extension.
Registration can only be done on the Internet at www.bosch-pt.com/warranty.
The registration receipt, which must be printed out immediately, and the original purchase receipt, which shows the date of purchase, are considered confirmation.
Registration is only possible if the buyer agrees to the storage of his data to be entered there.
Excluded from the guarantee are: Parts that are subject to normal or other natural wear and tear, as well as defects in the tool that can be traced back to normal or other natural use, abnormal environmental conditions, irrelevant operating conditions, overload or lack of maintenance or care.
Defects in the tool caused by the use of accessories, supplementary or spare parts that are not original Bosch parts.
Tools where changes or additions have been made.
Minor deviations from the target condition that are irrelevant to the value and usability of the tool.
The defect recognized by us as subject to a guarantee is rectified in such a way that, at our discretion, we repair the defective tool free of charge or replace it with a perfect tool (possibly also a successor model).
Replaced tools or parts become our property.
The LokSound 5 is the most important member of the LokSound family.
The combination of digital decoder and sound module on a printed circuit board allows us to achieve dimensions of only 30mm x15.5mm and can therefore be installed in almost any H0 and 0 gauge locomotive.
LokSound 5 decoders are offered with all common interfaces and always come with an 11x15mm "sugar cube" speaker and sound capsule kit.
Like all family members, the LokSound5 is a real multi-protocol decoder.
It can handle the DCC data format just like Motorola®, Selectrix® and M4.
In the DCC format, 14 to 128 speed steps are as natural as 2- and 4-digit addresses and up to 32 functions.
Thanks to RailComPlus®, the decoders register fully automatically with a suitable digital control center.
It masters all DCC programming modes and thanks to RailCom®, the CV values on the main track can be read out with the appropriate control panels.
Auxiliary registers exist for control panels that can only program CVs from 1-255.
Motorola® users benefit from up to 28 speed steps at 255 addresses.
Three more Motorola® addresses enable 16 functions to be triggered.
A built-in programming mode also makes reprogramming possible with the venerable Control Unit 6021.
The M4 protocol allows automatic registration with mfx®-compatible control panels.
The LokSound 5 decoder recognizes the Märklin® braking sections as well as ZIMO® HLU braking commands or the Lenz® ABC system.
Braking with DCC braking modules or with direct current is also possible.
In addition, it also stops with a Selectrix® braking diode.
An ABC automatic shuttle train enables automatic commuting between two stations.
The LokSound 5 decoder can be used on analog DC and AC railways.
In our online shop kitchenpoint.de we carry all Smeg kitchen appliances and the corresponding accessories.
We always check the quality and completeness of your order.
The new fully automatic coffee machine from Smeg brings freshly ground coffee to your kitchen or office.
The simple and reduced design, the plastic surface in matt colors in combination with the matt brushed stainless steel front make the new SMEG coffee machine with milk frother a design object.
In accordance with the reduced design, all functions such as grinding degree and water quantity, as well as the choice between espresso, americano, ristretto or a mild coffee can be selected with just four buttons.
Thanks to the perennial plant, coffee-milk and milk foam specialties can also be prepared.
Save shipping costs and time - and at the same time relieve the environment!
If you need more than one item, please only click on "Pay Now" when you have all the items in your shopping cart.
Combined shipping is automatically calculated and you get everything in one package.
This procedure saves you multiple purchases/payments and the environment is happy because no unnecessary shipping material and unnecessary fuel are consumed for the delivery of several packages.
Fast shipping with DHL, DPD and Deutsche Post!
As a rule, if payment is received by 2:00 p.m., we will send your shipment on the same working day.
In order for your package to arrive as quickly as possible, please make sure that your address is complete and that your name is also on your mailbox and your bell.
Would you like us to send your package to a Packstation?
Then please select DHL, because only DHL is allowed to deliver to DHL packing stations.
We will send you an e-mail with the tracking number if you have selected DHL or DPD as the sender.
This means that you can check where your package is from around 10:00 p.m.
Your satisfaction is our goal - all five stars count!
If you are satisfied with us, we would be happy if you gave us a positive rating and awarded all five stars in the detailed ratings.
Should it ever happen that not everything has gone to your complete satisfaction, we would be grateful if you would contact us before you submit a review.
This is the only way we have the chance to do everything to make you happy.
Fan pumps are excellent for supplying an aquarium with additional oxygen.
It is also possible to operate a filter system via air lift.
This series is offered by us in 3 variants.
Look at the table at the end of the offer.
There you can see the services in comparison.
If the pumps are strong enough, entire systems can be operated with them.
If you have a large aquarium, pumps with 2 or more outlets are suitable so that you can connect several air vents.
The MK series has one, two or four outputs, but depending on the model, fan pumps are also suitable for setting an accent in the aquarium, e.g. with an air curtain (you can find it in our shop) or with a decor that converts the air bubbles into a function.
A treasure chest, shell or something similar would be mentioned here.
The MK series has a special, soundproof construction and thus ensures low operating noise.
Installation is very easy.
The fan pump is connected to an air vent or similar using a 4/6 mm air hose... and you're ready to go.
The fan pump should be the same or higher as the water level and mounted on the outside.
If the fan pump is lower than the water level, you should put a non-return valve in between.
Simply cut the air hose and put the valve in between.
This would prevent, if water were to run backwards, that the water would run out of the pool through the pump...
If the fan pump is installed outdoors, it should, like other air pumps, be covered and protected from moisture
The MK series pumps are pure powerhouses that consume little energy
Even if we specify the processing time here on ebay as 3 days, packing is done every day and the packages are also picked up here every day.
If everything goes well on the way, it goes very quickly.
We just want to take precautions a little so that no one gets upset just because it took a little longer.
It would be like this, not everyone has understanding for all the employees who also work in forwarding... of course no corona stops here.
Please don't rate badly just because the delivery is delayed, that's solely down to the parcel services.
Of course, you like to scold these services, even if we say at the moment...they have a damn hard time
This also varies greatly from region to region.
Don't be angry with anyone, stay healthy and we all hope that better times will come again.
At the push of a button, you can easily choose whether your "Smart Stone" should glow in one color permanently or play through its entire color repertoire.
Set to change color, the glow stone maintains a light color for about a minute before gently transitioning to the next decorative shade.
The solid construction of the "Smart Stone" light has proven itself outdoors all year round.
In snowy surroundings, their light is even particularly good - only a shortened lighting time can be expected as soon as the days are shorter.
In winter, please only make sure that no snow impairs the function of the solar module.
"Smart Stone" uses a NiMh battery in the standard mignon ("AA") format, which can be easily replaced if necessary.
You can obtain a suitable spare battery from our web shop and thus extend the service life of your decorative light even further.
High-gloss effect spray that makes smooth surfaces look similar to chrome.
Suitable for all smooth surfaces, especially for the design of rims, wheel trims, paintable plastic parts with appropriate pre-treatment.
With this product, DUPLI-COLOR is offering a wipe-proof and weatherproof chrome spray for the first time.
The optimal effect is achieved on a black background, e.g. B. by pre-painting with DUPLI-COLOR TUNING Effect Primer.
Available as a single can and in a set incl. Effect Primer and tack cloth for optimal preparation of the paintwork.
For use on metal, wood, glass, paintable hard plastics, stone.
NEKTON-Bio supports smooth moulting and new plumage formation.
NEKTON-Bio contains all essential vitamins, amino acids, minerals, trace elements and 200,000 μg biotin/kg.
NEKTON-Bio gives the bird smooth and shiny plumage.
The majority of plumage damage occurring in bird husbandry is exclusively due to nutritional deficiencies.
Since the plumage consists of protein-containing substance, a particularly rich and balanced protein diet of the bird is a prerequisite for the formation of a perfect plumage.
For a functioning metabolism, the daily food must contain sufficient vitamins, minerals and trace elements.
A large part of the animal losses that occur during moulting are due to insufficient or unbalanced protein intake and/or insufficient supply of vitamins and minerals.
The composition of NEKTON-Bio explicitly takes into account and balances the unfavorable ratio of amino acids in most plant-based feeds.
No other vitamin preparation should be administered while using NEKTON-Bio.
NEKTON-Bio is cold water soluble and can easily be administered via drinking water or soft food.
GDR handwork model old building E-locomotive E 95 03 DRG/ DR, the locomotive was in use in Silesia and Central Germany, the very rare locomotive probably comes from the conversion proposal of the model railway company ME issue 11/1968, used with signs of wear and missing parts see photos, function well, the class E 95 is a heavy freight electric locomotive of the Deutsche Reichsbahn-Gesellschaft (DRG), which was designed for the traction of heavy coal block trains in the Silesian network, the kit may also come from the small series company ZSCHUTSCHKE and BACHMANN.
A locomotive is located in the DB Museum Halle (Saale) and we are refurbished to be operational
In 1924, the Deutsche Reichsbahn-Gesellschaft commissioned AEG to submit proposals for an electric locomotive that would be able to carry 2,200-ton coal trains and 530-ton passenger trains at a cruising speed of 45 km/h on this route.
A top speed of 65 km/h was required.
Thus, in March 1926, the DRG determined the delivery as a 1'Co+Co1' locomotive with AEG suspension drive with the delivery of the mechanical part, the Siemens-Schuckertwerke with the electrical part.
From December 1927 to June 1928, six locomotives were delivered, which were given road numbers E 95 01-06.
All survived the Second World War and then found themselves on the territory of what later became the GDR.
In 1946 the locomotives came to the Soviet Union as reparations.
They returned to Germany by November 1952.
In the Reichsbahn repair shop in Dessau, the suitability of all six locomotives for refurbishment was determined.
[4] As the re-electrification of the central German network progressively increased the need for locomotives for heavy freight train service, the three locomotives E 95 01 to E 95 03 were refurbished in 1959, with the remaining machines serving as spare parts donors.
The E 04, E 44 and E 94, which were available in larger numbers, were first preferred.
It was only when it was foreseeable that the number of refurbishments on the E 94 could not be increased further that the E 95 became the focus of the refurbishment.
[4]First, the locomotives were stationed in the Leipzig-Wahren depot.
They came to the Halle P depot in 1960.
They were used in their own circulation plan, mostly in front of coal trains from the Geiseltal in the direction of Halle, Leipzig and Erfurt.
The complicated control of the locomotives proved to be problematic with increasing age.
It often happened that contactors got stuck during switching operations.
Then the Beimann, who was constantly riding on this locomotive, had to release the contactor with a hammer and wooden wedge while driving.
Damage to the traction motors was common and led to months of locomotive failure.
[5] Since there were enough new locomotives available at the end of the 1960s and a significant expansion of electrical operations was not planned at the time, the Reichsbahn was able to do without old locomotives and most of the splinter types, so that the E 95 was decommissioned.
In addition, the Deutsche Reichsbahn only wanted to man electric locomotives with one man, which would have resulted in a problem in train operation due to the difficulties mentioned with the machines and the visibility from the driver's cab.
[5] After the E 95 02 and E 95 03 were shut down in mid-1969, they were followed by the E 95 01, which left service on October 5, 1970.
The intended new designation 255 001 was therefore never used.
Except for the E 95 02, all locomotives were dismantled.
The E 95 02 was set up as a replacement for the future museum locomotive E 77 10 as a point heating system at Halle main station.
It took some time before those responsible at the Reichsbahn could be convinced that the E 95 was worth preserving as a museum locomotive.
In 1979, the initially external refurbishment of the locomotive began with the aim of being able to present it at a vehicle show in the RAW Dessau.
[5] Since then, it has belonged to the Dresden Transport Museum as a non-operational museum locomotive.
In 1986 the locomotive was completed internally.
In the DB Museum Halle (Saale), the locomotive is supervised by the museum.
Since 1995, employees of the traditional community Bw Halle P have been working on the operational refurbishment of the locomotive.
In April 2015, the locomotive was presented for the first time at an exhibition in the Museums-Bw Arnstadt with new interior and exterior paintwork, whereby the transformers were checked and five traction motors are operational.
-The locomotives were in use on the Silesian Mountain Railway and the branching branch lines until 1945, where they proved themselves due to their reliable drive and low maintenance requirements.
In February 1945, the machines were relocated to Leipzig for the Central German network.
The main area of operation was initially Silesia
Handcrafted model H0 in original packaging, works well, optical rework on the locomotive is necessary, dusty, with signs of wear, cellar smell !!!, very rare handcrafted model, very small edition - the kit may also come from the small series company ZSCHUTSCHKE and BACHMANN
The packaging may have labels and signs of storage.
To ensure that the paint is applied evenly and cleanly, you should clean the components from dust, grease and fingerprints with a little soapy water, rinse with clear water and dry.
Before you bring the brush to the model with a new color for the first time, it is advisable to practice 2 to 3 strokes.
You can do this on the inside of the components, which will no longer be visible later, or on a yogurt cup.
The first line on the component
Draw the brush evenly line by line.
Slight overlapping of the paint layers later ensures an even surface.
Avoid swiping back and forth quickly with the brush.
This creates unrealistic surfaces.
A model is not a garden fence.
Start with the light colors.
Otherwise the dark ones could show through later.
Metal tones and metallic colors come at the very end with a separate brush.
Otherwise unsightly metal streaks can occur if they mix with normal colors.
Allow the painted parts to dry for a day before installing them.
The models achieve a true-to-original appearance through the decals or decals.
From national emblems on airplanes to ship names to decorative strips and license plates on car models: the decals give the model the finishing touch.
Apply the decals in the correct order while the components are still within easy reach.
An aircraft cockpit can be glued on more easily before it is installed in the fuselage.
Time, patience and a steady hand are even more important than the right tools such as scissors, tweezers and toothpicks.
Cut out each required decal individually and lay them out for yourself.
Decals are also called water slide images because you briefly moisten the back of them with water until the backing paper turns dark due to the moisture.
Then you slide the picture just a small piece off the paper and place the piece on the appropriate spot on the model (which you also moistened beforehand).
While holding the decal on the model with a tool, pull the backing paper away from the side.
Attention: Always check whether the picture is in the right place before you slide it completely off the paper so that it does not stick to your finger, wrinkle or even tear.
Soak up excess water with a kitchen towel.
Attention not suitable for children under 3 years
The LokSound 5 decoder can play back up to 10 channels at a time.
Each channel can be resolved with up to 16 bit / 31250 kHz and finally offers hi-fi quality on your system.
There is practically no difference to the original audible.
A Class-D audio power amplifier with an output power of up to 3W controls the speakers, which can have an impedance between 4 ohms and 32 ohms.
The huge 128 Mbit sound memory ensures enough capacity.
All individual sounds can be individually adjusted in volume.
The super flexible sound engine without a rigid schedule allows the prototypical simulation of all conceivable rail vehicles.
Three separately adjustable braking functions and two alternative load scenarios give you maximum control over your vehicles.
In order to obtain an optimal field of view, the magnifying glass should be brought as close to the eye as possible.
The specially designed aplanatic-achromatic lens system allows you to use the magnifying glass practically free of distortion and color errors right up to the edge zone.
Magnifying glasses are often marked with magnification information.
However, this information only applies to precisely defined conditions, which rarely correspond to the conditions of use.
In order to be able to use your magnifying glass optimally, we ask you to observe the information in the table "Technical data" (see instructions for use in the packaging).
Light reflections occur on the lens surfaces of all optical devices, including folding magnifiers.
These reflections are significantly reduced by an anti-reflective coating.
If the optimal conditions of use are observed - magnifying glass close to the eye - reflections on the lens surfaces are less noticeable.
Further information can be found in the enclosed instructions for use (available in German and English).
Zeiss VisuCard magnifier credit card magnifier enlargement pocket magnifier reading magnifier reading aid
Whether as a reading aid on the go or simply for the everyday little things: The Zeiss VisuCard is the ideal helper, as it can be taken anywhere thanks to its handy format.
And their hard layer makes them robust against special hardships in everyday life.
Each magnifying glass comes with a credit card sleeve for storage and safe transport.
You are bidding on these parts that you see in the pictures or as described under "What are you bidding on".
In what condition is the item offered?
Of course, everyone can overlook something, because no human being is free from mistakes - if this is the case, just write a message and it will be clarified to your complete satisfaction (either by exchange, partial refund or complete refund).
You will receive a proper invoice.
Unless expressly requested otherwise by the buyer, shipments are always insured with a tracking number via DHL!
The individual shipping costs can be found in the above shipping conditions.
There are no additional handling costs.
Whether as a comforter for a stomach ache or just to cuddle - my little warmth friend can be used in many ways.
Cherry pit pillows are a traditional home remedy for soothing heat applications, since cherry pits absorb heat very well and release it in doses.
The removable inner cushion can be easily heated in the microwave or in the oven.
The soft cover makes the application particularly pleasant so that the little ones feel safe, even if they are not doing so well.
The cherry pit pillow with cover is only suitable as a heat pad for the following areas of application:
Before heating the pillow, check for an atypical smell, stick or burn marks and dispose of them immediately if they are present.
Please take the inner pillow out of the cover to warm it up beforehand!
Heat in the microwave at a maximum of 300 watts for a maximum of 2 minutes (observe the instructions of the microwave manufacturer!)
Immediately after heating, shake the heat evenly throughout the pillow!
Then put the inner pillow back in the cover.
At the first heating, there may be a slight formation of moisture on the surface, but this disappears with repeated applications.
Be sure to follow the heating instructions given, as longer times or higher energy outputs can lead to damage (risk of ignition and burns!).
Before heating the pillow in the microwave, check that the manufacturer's instructions allow heating grain products.
After the heated inner pillow has been put back into the cover, please check the temperature of the pillow for suitability for babies (max. 43 °C) on the crook of your arm!
Do not use the pillow in the case of acute and chronic, inflammatory or feverish diseases, circulatory problems, fresh bruises, bruises and open wounds, and in people with reduced sensitivity to pain.
If you have existing skin, heart, veins, diabetes or tumor diseases or if you are pregnant, please contact a doctor before use.
If the seams have opened and loose cores leak, dispose of the product and the loose cores immediately and are not accessible to children.
If the product is used on babies under 1 year old, the child's temperature should be checked regularly during use to rule out overheating!
All serious incidents related to the product must be reported to the manufacturer and the competent authority of the country in which the user is established.
The cover is removable and machine washable at 30°C.
Please note the care symbols on the product!
Often on tour and still have a lot of equipment with you?
No problem with the Everyday V2 Backpack by Peak Design!
20 liters capacity also swallow larger photo equipment without any problems, which can be safely stowed away using the padded FlexFold dividers.
And what else you need in everyday objects remains well organized and separable from the photo equipment thanks to practical access points in the individually configurable interior.
With the "update" of the Everyday Line to version 2 (V2), the series also presents itself in a new look.
The chic, minimalist design has it all - with the Everyday Backpack series, Peak Design has developed some highly innovative solutions that reliably protect the interior of the backpack and still allow access to photo equipment in seconds.
This works in two ways: First, conventionally via the lid flap, which can be closed with the MagLatch closure system, an excellently thought-out solution for effective protection that has already proven itself with messenger bags.
There is a metal hook in the closure flap with matching anchor bars on the front of the backpack.
Unlike most backpacks, Peak Design has considered different "filling levels": there are 4 anchor bars, riveted stably, into which the locking hook can be hooked.
If the backpack is fully loaded, you simply take the top bar, if it is rather empty, a lower one.
The flap closure and hook are also magnetic.
The backpack can also be closed reliably without snapping the hook.
The second option also fundamentally distinguishes the Everyday Backpack from other photo backpacks: in addition to the lid flap, there is also a zipper opening on both sides of the backpack.
This eliminates the biggest disadvantage of traditional top access backpacks - you no longer have to rummage through the contents!
At the same time, this clever detail increases the everyday suitability of the backpack enormously: if you take not only your photo equipment with you, but also everyday objects or luggage.
In the Everyday Backpack you can configure the interior individually (more on this below) and thus easily store both separately - and access them independently through the two side openings.
You can also pull the backpack in front of your body from the right side, for example to access the camera equipment in the right main compartment, while everyday things stay safely in the left half of the backpack and don't get in the way.
Comfortable, easily adjustable shoulder straps help.
And since the outer shell of the backpack is also made entirely from 100% recycled, weatherproof nylon, the contents stay dry even if you head to Scotland in the autumn.
Rotinger brake discs are designed to meet the demands of dynamic drivers who value reliability and safety when braking, even under difficult conditions.
Rotinger brake discs are made of cast iron and then machined (drilled and cut).
All tuned discs are produced in short series according to individual technical characteristics specific to certain discs and patterns.
On the basis of the individual technical drawing, a special production program is created, which depends on the properties of the original assembly when balancing the disc.
The tuned discs manufactured in this way ensure high comfort and braking efficiency.
Additional openings increase the effectiveness of cooling the disc, while the cuts improve cleaning of the brake discs and brake pads.
Aesthetic properties of our tuned windows underline the character of every car with an attractive and striking appearance.
Coloma is the city where an unexpected event shaped the history of the west coast.
In the winter of 1848, a man discovered glowing boulders in the water at the southern fork of the American River.
Although he tried to keep his discovery a secret, the news spread quickly, sparking the so-called "California Gold Rush" of '49.
Thousands came from near and far, making Coloma one of the fastest growing and thriving cities in the country.
Areas were staked out, tents pitched, and saloons and hotels sprang up almost overnight.
Everyone wanted their share of the country's wealth.
For many it was: "Coloma or Bust" (Coloma or bankruptcy)!
In this game you are a pioneer who seeks wealth in the West and wants to make a name for himself.
You will look for gold, recruit workers, herd horses and build businesses.
You will also get the opportunity to explore the surrounding rivers and adjacent areas.
You are not alone - the other pioneers seem to have the same idea!
You have to outperform your fellow pioneers to avoid going bust with the rest of them.
Coloma is a fast-paced strategy game with many paths to victory.
You choose your actions simultaneously, have to budget with your resources and set up a tableau that "works" more and more for you (so-called "engine building").
The buildings on your tableau allow you to become more efficient, get additional actions or turn rules in your favor.
With these buildings and the dynamic bridge tiles, you can develop your individual playing style with the help of fine adjustments.
Coloma is set over a three-year period from 1848 (the year the gold was discovered in Coloma), through 1849 (the year of the California Gold Rush) to 1850 (the year California gained official statehood).
A year in Coloma consists of five rounds.
During each round, players will secretly and simultaneously select a location on the game board where they can perform actions.
After that, their selection is revealed and they place their pioneers on the appropriate locations.
If a location has the most pioneers, it will be banned!
This deactivates one half of the location - reducing the possible actions there.
Then players take turns performing actions such as winning resources, moving wagons, setting up tents, searching rivers, building bridges, opening shops and positioning gunslingers.
When all actions are completed, the pioneers will return.
The promoter rotates to a new location at the beginning of each round, changing the available actions.
This continues until the advertiser has moved five times, covering each location once, and the year ends.
There is a shootout in which players have to defend Coloma from an incursion of angry bandits.
If players have contributed enough gunslingers and outnumber the bandits, they will receive rewards.
However, if they fail, they will receive lower rewards or end up in the graveyard.
The game ends after the third shooting, then the final scoring takes place.
The player with the most victory points wins!
For free shipping, I use the shipping method, shipment of goods (games wrapped) up to the dimensions 35 x 25 x 4.5 cm.
Everything else is mostly DPD insured and with shipment tracking (games wrapped in foil, wrapped with fleece and packing paper).
If you are a collector, I can also send a box in a box for an additional charge of 2 euros, which means that there are 100% no pressure points.
The "drive" of a tube power amp contributes significantly to the warmth and fat content of the guitar amp sound.
These features are perfectly implemented by the Valve Reactor circuit.
With the VOLUME, GAIN and MASTER VOLUME controls you can set the desired level on the one hand and the distortion content of your sounds on the other.
In addition, the VT+ series amplifiers offer a unique POWER LEVEL control that allows you to lower the sound level without changing the "gain" and distortion.
It was already mentioned above that the POWER LEVEL control can even be used to boost a power reserve when things get outrageously loud.
Thanks to the POWER LEVEL control, the entire potential of the VT+ series can be used in any situation.
The headphone socket can also be used as a line output.
The signal present here is processed with a box simulation, so that you get an eminently "acoustic" sound impression even when using headphones or when recording directly.
A CD or MP3 player can be connected to the AUX socket so you can jam along to your favorite songs.
A tuner function is also on board - so you don't need a separate tuner.
If you also treat yourself to a VFS5 footswitch, you can also conveniently call up the sounds with your foot, turn the effect blocks on/off and "tap" the tempo of the compatible effects.
This is actually indispensable for live use.
With its new power packs, VOX is taking another step into the future!
According to the ANSI/PLATO FL1 standard, the values previously obtained were determined in the Fenix laboratory at 21°C±3°C, 50%-80% humidity and the built-in 275mAh LiPo battery.
The values may vary depending on the flashlight used, age and environment.
*: The burning time in the bright level includes the burning time with reduced brightness due to overheat protection.
2) Dealers are responsible for customers.
Customers should contact the retailer or distributor they purchased Fenix lights from for warranty support with the Fenixlight Limited 'Warranty Card' and either a commercial invoice or receipt.
Fenix will provide our authorized dealers with the technology and parts needed to maintain our lights.
1) 15-Day Free Replacement: Fenix will replace a new product within 15 days of purchase due to any manufacturing defect if problems occur during normal use.
We will replace it with the same model.
If the model has been discontinued, customers will receive a product with a similar or improved model.
2) Free repair for 5 years: Fenix offers free repair for lamps within 5 years from the date of purchase if there is a problem under normal use.
Different warranty period for different products:
With the exception of the products and accessories listed above, other products or free offers from Fenix are not covered by the product warranty.
3) Limited Lifetime Warranty: For lights that have exceeded the free repair warranty period, we offer lifetime repairs but charge a fee for parts.
The dealer will notify the customer of the cost of the part before repair.
4) Warranty Certificate: Customers request after-sales service from Fenix dealers or dealers by presenting a completed Fenix warranty card, purchase invoice or receipt.
The distributor should offer services to customers and Fenix will support these services.
5) The free warranty does not cover damage or failure caused by:
any defect or damage caused by improper operation includes, but is not limited to, operation not in accordance with the warranty or notices in the product specification.
For example, the product specification describes that the sealed head must not be disassembled as this can damage the flashlight and void the warranty.
Any defect or damage resulting from other conduct cannot be reasonably controlled by Fenix.
6) To make a warranty claim, please contact our warranty department with the following information: name, type/model of the warranty item, serial number.
Exclusive, new, high-quality and anatomically preformed cut offers maximum comfort, a perfect fit and thus allows almost unrestricted freedom of movement.
Preforming with special, wide embossing on the joints for improved freedom of movement (on arm and knee bends)
For the Focea Comfort 4, the area covered by the Flex System 2 has been more than doubled in order to further increase comfort.
Seamless stretch panels at the joints reduce friction (armpits, arm and squats)
High-quality preforms in the lower back area and in the crotch ensure a snug, perfect fit.
Elaskin 8.8 stretch panel in the lumbar region increases flexibility with the back zipper, improving comfort, especially when bending over and when mounting and donning equipment on the surface.
The Free Flex Zone, located around the shoulders and back, guarantees increased flexibility in arm and back movements.
Fireskin is a warming, water-repellent material with a special surface structure that offers a high degree of protection against the cold.
Positioned on the chest, it brings warmth to a sensitive area of the body.
Seamless, thin (-2mm) face seal on hood increases comfort, seal and durability (separate head hood)
A soft zone in the collar improves the seal with a finely adjustable width adjustment thanks to a flexible, gentle Velcro fastener that does not stick to the lining or the seams
Zipped double cuffs at the wrists and ankles combine a foldable inner cuff with a soft, lined neoprene outer cuff
45° notch at the end of the inner cuff for increased elasticity and resilience when tightening.
Long zip at the neck with Elaskin reinforcement, for an anatomical cut with increased comfort on overalls without a hood
Long G-Lock P back zipper (coverall without hood) with metal slider and integrated Water Dam System for improved sealing (Beuchat patent)
Zippers on arms and legs
Neoprene reinforcements at all ends of the zippers to prevent tearing if excessive force is used.
Neoprene panels bonded flush with outer and inner overlap
Edges of outer cuffs hemmed for greater resilience
Inner cuff edges notched for increased flexibility
The original Beuchat system was designed to keep the computer in place, especially during deeper dives (the system is compatible with all major wrist computers)
The protein consumed with the food is broken down by the bird in its gastrointestinal tract into the individual protein building blocks (amino acids) and from these, in turn, it builds its own body proteins, which it also needs for plumage formation.
The formation of plumage in nestlings and the formation of new plumage in molting birds are extremely complex processes and are associated with a particularly high level of stress on the animal's entire organism.
Please note that NEKTON-Bio must not be administered during breeding, as this can lead to disturbances in the incubation process.
Following this course of administration of NEKTON-Bio, you should go back to the daily vitamin supply with NEKTON-S (multivitamin preparation) and NEKTON-MSA (mineral preparation).
The protein consumed with the food is broken down by the bird in its gastrointestinal tract into the individual protein building blocks (amino acids) and from these, in turn, it builds its own body proteins, which it also needs for plumage formation.
The formation of plumage in nestlings and the formation of new plumage in molting birds are extremely complex processes and are associated with a particularly high level of stress on the animal's entire organism.
Please note that NEKTON-Bio must not be administered during breeding, as this can lead to disturbances in the incubation process.
Following this course of administration of NEKTON-Bio, you should go back to the daily vitamin supply with NEKTON-S (multivitamin preparation) and NEKTON-MSA (mineral preparation).
1 g NEKTON-Bio to 250 ml water or 100 g soft food.
It is advisable to prepare only as much drinking water/soft food as the bird consumes daily and to change water/food daily.
A level measuring spoon (included) corresponds to 1 g NEKTON-Bio.
In the case of severe plumage damage, a double or triple dose of NEKTON-Bio can be given at the beginning until the beginning of the new plumage formation is visible.
After that, the normal dose is given until the new plumage formation is fully completed.
Storage: NEKTON-Bio should be stored dry, away from direct sunlight, between 15° and 25°C.
Since its introduction in 2001, VOX's Valvetronix series has continued to evolve, including the combination of advanced modeling technology with the "Valve Reactor" circuit, which perfectly emulates the behavior of a tube amp.
With the VT20X/VT40X/VT100X amps, we are introducing a brand new modeling engine that is absolutely state-of-the-art in terms of sound.
Thanks to the VET technology (Virtual Element Technology), which is based on the analysis of the components and amp circuits, the VTX amplifiers come up with an authenticity that is absolutely impressive.
Of course, these amps also contain the multi-stage Valvetronix tube preamp.
This is based in part on real analog circuits because they simply get the tonal variations and nuances of a tube amp better than any simulation.
In addition to this sophisticated circuit, the VTX amplifiers offer a closed housing and a bass reflex system from which the natural resonances just bubble up.
With VOX's "Tone Room" software, you can even correct and twist historical facts on the virtual level until the amp and effects sound the way you always imagined.
The perfect combination of tube sound with modeling technology is primarily due to the VOX Valve Reactor technology introduced in 2001.
Of course, it has been refined several times since then to meet newly added sound requirements, which in 2010 again led to a performance boost for the VOX Valvetronix series - with more dynamics and more numerous and significantly improved amplifier models.
From the handy VT20+ to the VT120+ with two speakers, the new VT+ Valvetronix series has also been designed in such a way that all guitarists looking for maximum sound variety will find what they are looking for here.
All guitarists dream of the pressure and dynamics of a tube amp: They expect a fat sound, a nuanced reproduction of playing dynamics and string attack as well as a prompt response.
During an in-depth analysis, the VOX engineers discovered that the power amp in particular determines the tube character of an amplifier and based on this finding developed the VOX Valve Reactor technology.
Equipped with a 12AX7 tube, the Valve Reactor circuitry of each VT+ amp perfectly reflects the behavior, subtle nuances and tonal character of a tube amp.
The large main compartment is also adaptable: with three individually positionable and foldable Velcro fasteners, it adapts to the needs of your photo equipment and is therefore suitable for any type of camera - from mirrorless system cameras of all sizes to full-frame SLR cameras.
Of course, what ultimately fits in the backpack depends on the size of the camera and the lenses.
A possible configuration would be a DSLR camera with an attached lens, two to three interchangeable lenses and a clip-on flash.
Larger DSLM cameras such as the various models in the Sony a7 series or a Fuji X-T2 still leave room for more lenses.
You can also store a lot of accessories.
And those who have a small DSLM camera (Olympus MFT cameras, Fujifilm X-A or E-series) can use the backpack for their equipment and for non-photographic things.
Drone pilots also make the best choice with the Everyday Backpack 20L, because the backpack offers enough space for a DJI Mavic Pro including remote control and accessories.
The decorative lamp blends harmoniously into any bed, garden area or rock garden.
The lamp is easy to set up and can be anchored to the ground with 2 ground spikes.
Integrated and powerful 0.4 watt solar module for optimal charging of the built-in battery.
Illumination time max. 10 hours
- The robust plastic version can be used outdoors all year round.
In the Hollywood spectacle, it is mostly threatening objects from distant galaxies that glow with color inside.
"Smart Stone," on the other hand, is completely harmless: the sun alone ensures that this solar light shines fascinatingly - optionally in white or colored light (in six different shades).
The edgeless, amorphous design has been deliberately chosen: this modern light object presents itself like a naturally formed large pebble by day.
Its organic curves fit into any natural environment - whether at the edge of the terrace, in the lawn or in the stone bed.
It also does well in the vicinity of larger pebbles and boulders, where it knows how to hold its own thanks to its size.
You can save yourself a lot of preparatory work: as a solar light, "Smart Stone" does not need a cable or batteries.
Place the "light stone" in any place illuminated by the sun during the day.
Two supplied ground spikes ensure a firm hold if necessary.
The matte white plastic case itself is robust and weatherproof.
Its solar panel discreetly hides "Smart Stone" inside, along with its battery and two LEDs - one for white light and the other for colored light.
The battery is already charging when sunlight falls on the housing.
When dusk falls, "Smart Stone" begins to glow automatically; you decide in which color: you have a choice of six attractive light colors - in addition to daylight white.
Finally, switching off is also automatic as soon as the battery charge level has dropped to a predetermined minimum or it becomes light again.
As soon as the sun shines again, the charging cycle starts all over again the next day.
The engine control of the LokSound 5 has again been fundamentally improved.
A variably adjustable PWM clock frequency of 10kHz to 50kHz ensures super-quiet operation, especially with anchored bell motors - the typical "rumbling" is a thing of the past.
The load control can now be adapted to difficult cases with up to 10 CVs.
The unique "Autotune" function allows the decoder to be automatically calibrated to the motor.
With a motor current of up to 1.5A, the LokSound 5 decoder also supplies enough juice for older motors.
- please use the Ebay shopping cart so that the shipping costs are correctly summarized.
- You will receive an email with the package number for tracking purposes.
- You will receive an invoice with VAT from the specialist retailer for each purchase of new goods.
- we usually process your order or request within 24 hours on working days.
The Zappiti 4K HDR Series - The Best Movie Experience Ever!
Zappiti designs and manufactures high-quality video management systems; for the best image quality, excellent performance and the best possible user-friendliness.
All Zappiti products are designed to give you convenient and intuitive access to your entire movie library in stunning 4K high definition resolution.
Award-winning Zappiti players are successfully used around the world to enhance the movie experience, both in the home and in commercial settings.
The Zappiti Neo supports most digital audio and video formats, including the latest 4K HDR standards such as Dolby Vision and HDR10+, almost all current video file formats, full BD/UHD menus, HEVC video codec with a billion colors (10-bit color coding), VP-9, 3D video standards with 3D subtitles, high-resolution audio files such as DSD, FLAC, ALAC and MQA, and features a wide, solid chassis, two HDMI outputs, 4K 60p, Dolby Atmos and DTS: X for the best possible home cinema experience.
The combination of Zappiti Magic Pixel V3 and VS10 video processing offers outstanding image quality - far better than previous generations - with improved dynamics, precise color representation, increased contrast, solid deinterlacing and better upscaling (up to 4K resolution).
Even on a Full HD 1080p TV or a front projector, you will be amazed at the image quality of your display!
3D also offers better image depth and an impressive, immersive effect.
Some Android apps are not suitable for use with the remote control.
In this case, use a connected computer mouse or an AirMouse (not included).
Network Playback: Special network optimization that guarantees better performance in playback over the local network thanks to SMB protocol (including HEVC UHD files) over Gigabit Ethernet or Ethernet 10/100, regardless of the type of media.
Universal RC: Seamless integration into smart home installations via ready-to-use Control4 drivers, RTI drivers, Elan drivers, Crestron IP codes, Savant, ProControl, Logitech, URC, Pronto and general IP codes.
Also compatible with all printers that use the products specified above according to the manufacturer or operating instructions.
Over 10 years of experience as a specialist dealer in toner production
All listed company and brand names as well as all type designations are the property of the respective legal manufacturer and owner of the rights.
Their mention serves only to provide orientation and to indicate the compatibility of the goods.
These are not original products from the respective printer manufacturers, but compatible goods.
The lamp is designed for dual balance, based on new, flat SMD LEDs with high power and high color rendering.
A modern microprocessor with extraordinary possibilities ensures the adjustment of the color temperature and brightness of the lamp.
In addition to adjusting the brightness, there are two standard color temperatures: daylight and artificial light.
It is also possible to manually set and save the color temperature in the range of 3100 - 5650K.
Use the current settings in flash memory.
A special feature of the controller is that it is easy and intuitive to use.
The lamp produces a very luminous flux with soft light of high quality, completely flicker-free.
The beam angle of 120 degrees, with which you can illuminate large areas with a relatively small distance, is excellent.
By the way, also in reporter situations in small rooms or short distances.
You can adjust the brightness practically without changing the color temperature.
It's a great tool for working both on the film set and in the studio.
The optionally available DMX512 controller allows the lamp to be remotely controlled in television studios or when the lamp is installed in hard-to-reach places.
At the back of the lamp is the control panel, consisting of buttons and a luminous display.
The display shows the current brightness setting in percent and the current color temperature in Kelvin.
There is also the slot for the NP-F batteries (not included)
User memory The memory has up to three panel settings for brightness and color temperature.
In order to carry out the settings for the individual settings on the memory locations, simply press and hold one of the memory buttons and you're done.
The memory controller saves the current state of the lamp when it is switched off, so that the known situation is restored when it is switched on again - very practical when working in the studio, for example when the camera is set to certain color temperatures.
Working with a battery One of the greatest strengths of the DL3120 functionality results from the possibility of operating with inexpensive NP-F batteries.
These are often already owned by photographers and cameramen (and women) - so you can use existing equipment.
Before the set, the DL3120 can also check whether the batteries have enough power - a battery tester is also built in - for each of the two battery compartments a value in the two displays (the left battery in the upper display, the right one in the lower display).
In addition, it is of course possible to continuously supply the headlight with power via the supplied power supply.
The construction of the headlight is very simple.
You have a 16mm sleeve as a connection for attachment, so you can connect directly to your photo tripod.
The inclination can be reliably adjusted using brakes on both sides.
Care was taken to ensure that the mechanical components are also of extremely high quality and are therefore designed for durability and hard use.
In addition, a tilt joint is included in the scope of delivery.
It's great that the scope of delivery also includes a bag.
So you can safely transport or store the lamp with all the accessories you may still want to buy without any problems.
Environmentally friendly: MOTIP DUPLI products are free of harmful metals.
The group of companies strives to use formulations without regulated or questionable ingredients without affecting the best possible performance.
The caps and packaging are made of recyclable materials.
Disposal: Please only recycle empty containers.
Bring the container with leftovers to the problem waste site.
Marking: All MOTIP DUPLI products correspond to the current status of the marking regulations.
The classification, classification, award is based on GHS or CLP 1272/2008/EG in the currently valid form.
The safety data sheets comply with REACH 1907/2006/EG, Article 31 and Annex II, in the currently valid form.
With many DUPLI-COLOR spray paints, the spray lock and tamper-proof cap prevent unauthorized use.
Refer to the corresponding notes on the cap or label.
Always read and observe the cautionary texts carefully before use!
After the release of our new high-end broadband B 100- 6 OHM, it was only a matter of time before our SOLO series would have new offspring again.
SOLO 15 is the name of the new offspring and is visually reminiscent of the big role models with the B 200 - 6 OHM.
However, this construction proposal includes a suitably designed foot directly to raise the speaker to the correct listening position.
This has no influence on the acoustics and can therefore be adjusted in length according to the conditions at home.
In principle, the SOLO 15 is very well suited for people for whom the maximum volume plays a rather subordinate role, but where an exceptionally high level of sound is to be achieved.
A 10 cm loudspeaker is simply not able to generate such large sound pressure levels almost unfiltered.
However, that doesn't mean the SOLO 15 sounds weak.
On the contrary, she appears remarkably mature and extremely impressive and accurate for her size.
Tonally, the SOLO 15 was tuned with a slight increase in high tones.
This is common with widebands in order to optimize the bundling, which increases sharply at high frequencies.
Directed precisely at the listening position, the SOLO 15 convinces with a very clear and fine sound.
Turned slightly outwards, the high-frequency range can be reduced and the sound pattern can be made warmer.
Thanks to the point sound source, the location of the individual components of a piece of music in the optimal stereo triangle is razor-sharp and amazingly precise.
The reference-suspicious extremely low mechanical losses of the B 100 - 6 OHM ensure fine dynamics that are second to none.
The SOLO 15 not only complements our SOLO series, but expands it in terms of resolution and accuracy.
As with all our kits, it is advisable to think about the final appearance of the speaker at the beginning in order to plan for appropriate changes during construction.
If, for example, you want to veneer the housing, the lowering of the loudspeaker must be adjusted accordingly, since the veneer applies material again.
After all the plates have been cut to size (e.g. in the hardware store), you should first drill an 8 mm hole in the base plate at the appropriate point in order to be able to carry out the cable there later without any problems.
With the help of a router, the loudspeaker opening follows in the front, so that the B 100 - 6 OHM can later be used flush.
This opening should be provided with a 45° chamfer on the back in order to make the opening surface of the speaker chassis as large as possible inside.
The four screw points of the B 100 - 6 OHM have an interruption in the chamfer, as shown in the picture "Detail chamfer".
Then you start with the actual construction of the box and place one of the two side walls on a flat surface in front of you.
The back wall, the lid, the front and the bottom are now glued onto these.
The three reinforcements should also be used and glued.
The reinforcements themselves can vary in material thickness if necessary, if you want to use ready-made strips from the hardware store, for example, instead of making them yourself from 16 mm MDF.
In the next step, the second side is attached.
This is followed by all the plates of the foot, i.e. the two sides and the front.
Using a suitable circular hole saw or a Forstner drill bit makes it easier to attach the openings of the bass reflex tube and the connection terminal on the rear wall.
Then you use a round cutter to round off all the edges of the actual box.
The top of the footplate can also be rounded off with it.
The base plate is then firmly glued to the base of the housing and additionally screwed on with long wooden screws.
This is followed by marking and pre-drilling (2.5 mm drill bit) the screwing points of the speaker chassis and the connection terminal.
After the housing has been cleaned of wood dust (vacuum / blow out), you start laying the cable.
The easiest way to do this is through the 35 mm bass reflex opening in the rear wall.
You slide the entire and unabridged cable piece by piece through the 8 mm hole in the foot to the terminal opening and let it protrude there for about 30 cm.
In the upper part of the housing, the cable is routed to the speaker opening and also allowed to hang out loosely there.
The crossover is then prepared and used.
The construction plan of the crossover and the corresponding connection plan can be found in the following document: Assembly instructions for the Solo 15 crossover.
If the crossover is installed and the connection terminal is screwed on, the 8 mm cable opening inside the box, which is not yet completely closed, is sealed.
Through the 35 mm bASSREFLEX opening and with a little skill, you can let hot glue drip onto the opening and thus close it.
The seal can be checked through the opening of the B 100 - 6 OHM and with a small lamp.
Now follows the damping according to the description.
The B 100 - 6 OHM is then connected and screwed tight with the appropriate screws.
The polarity plays an important role here, so that the plus line (marked cable) has to be soldered to the plus pole of the loudspeaker (larger contact).
Finally, the bass reflex tube is shortened to the specified length of 28 mm (total length of the tube) and inserted.
For damping, a mat of the damping material is cut in two and distributed loosely in the housing.
The opening around the bass reflex channel should be kept free.